Merge samsung, imx, tegra into u-boot-arm/master

This commit merges branches from samsung, imx and tegra
meant to fix merge issues between u-boot/master and
u-boot-arm/master, as well as a few manual merge fixes.

.gitignore

@@ -38,12 +38,12 @@
 /u-boot.sha1
 /u-boot.dis
 /u-boot.lds
-/u-boot.lst
 /u-boot.ubl
 /u-boot.ais
 /u-boot.dtb
 /u-boot.sb
 /u-boot.geany
+/include/u-boot.lst
 
 #
 # Generated files

MAINTAINERS

@@ -7,6 +7,10 @@
 # and Cc: the <u-boot@lists.denx.de> mailing list.			#
 #									#
 # Note: lists sorted by Maintainer Name					#
+# Note: These are the maintainers for specific *boards*.  The		#
+#	custodians for general architectures and subsystems can		#
+#	be found here -- http://www.denx.de/wiki/U-Boot/Custodians	#
+#									#
 #########################################################################
 
 
@@ -388,6 +392,8 @@ Ricardo Ribalda <ricardo.ribalda@uam.es>
 
 Stefan Roese <sr@denx.de>
 
+	a3m071		MPC5200
+
 	P3M7448		MPC7448
 
 	uc100		MPC857
@@ -800,7 +806,7 @@ Veli-Pekka Peltola <veli-pekka.peltola@bluegiga.com>
 
 	apx4devkit	i.MX28
 
-Luka Perkov <uboot@lukaperkov.net>
+Luka Perkov <luka@openwrt.org>
 
 	ib62x0		ARM926EJS
 	iconnect	ARM926EJS

MAKEALL

@@ -20,6 +20,8 @@ usage()
 	  -m,        --maintainers     List all targets and maintainer email
 	  -M,        --mails           List all targets and all affilated emails
 	  -C,        --check           Enable build checking
+	  -n,        --continue        Continue (skip boards already built)
+	  -r,        --rebuild-errors  Rebuild any boards that errored
 	  -h,        --help            This help output
 
 	Selections by these options are logically ANDed; if the same option
@@ -52,8 +54,8 @@ usage()
 	exit ${ret}
 }
 
-SHORT_OPTS="ha:c:v:s:lmMC"
-LONG_OPTS="help,arch:,cpu:,vendor:,soc:,list,maintainers,mails,check"
+SHORT_OPTS="ha:c:v:s:lmMCnr"
+LONG_OPTS="help,arch:,cpu:,vendor:,soc:,list,maintainers,mails,check,continue,rebuild-errors"
 
 # Option processing based on util-linux-2.13/getopt-parse.bash
 
@@ -73,6 +75,8 @@ SELECTED=''
 ONLY_LIST=''
 PRINT_MAINTS=''
 MAINTAINERS_ONLY=''
+CONTINUE=''
+REBUILD_ERRORS=''
 
 while true ; do
 	case "$1" in
@@ -115,6 +119,12 @@ while true ; do
 	-C|--check)
 		CHECK='C=1'
 		shift ;;
+	-n|--continue)
+		CONTINUE='y'
+		shift ;;
+	-r|--rebuild-errors)
+		REBUILD_ERRORS='y'
+		shift ;;
 	-l|--list)
 		ONLY_LIST='y'
 		shift ;;
@@ -198,7 +208,9 @@ fi
 OUTPUT_PREFIX="${BUILD_DIR}"
 
 [ -d ${LOG_DIR} ] || mkdir "${LOG_DIR}" || exit 1
-find "${LOG_DIR}/" -type f -exec rm -f {} +
+if [ "$CONTINUE" != 'y' -a "$REBUILD_ERRORS" != 'y' ] ; then
+	find "${LOG_DIR}/" -type f -exec rm -f {} +
+fi
 
 LIST=""
 
@@ -208,6 +220,7 @@ ERR_LIST=""
 WRN_CNT=0
 WRN_LIST=""
 TOTAL_CNT=0
+SKIP_CNT=0
 CURRENT_CNT=0
 OLDEST_IDX=1
 RC=0
@@ -380,6 +393,12 @@ LIST_pxa="$(boards_by_cpu pxa)"
 
 LIST_ixp="$(boards_by_cpu ixp)"
 
+#########################################################################
+## SPEAr Systems
+#########################################################################
+
+LIST_spear="$(boards_by_soc spear)"
+
 #########################################################################
 ## ARM groups
 #########################################################################
@@ -610,6 +629,13 @@ list_target() {
 donep="${LOG_DIR}/._done_"
 skipp="${LOG_DIR}/._skip_"
 
+build_target_killed() {
+	echo "Aborted $target build."
+	# Remove the logs for this board since it was aborted
+	rm -f ${LOG_DIR}/$target.MAKELOG ${LOG_DIR}/$target.ERR
+	exit
+}
+
 build_target() {
 	target=$1
 	build_idx=$2
@@ -622,6 +648,7 @@ build_target() {
 	if [ $BUILD_MANY == 1 ] ; then
 		output_dir="${OUTPUT_PREFIX}/${target}"
 		mkdir -p "${output_dir}"
+		trap build_target_killed TERM
 	else
 		output_dir="${OUTPUT_PREFIX}"
 	fi
@@ -640,6 +667,8 @@ build_target() {
 	fi
 
 	if [ $BUILD_MANY == 1 ] ; then
+		trap - TERM
+
 		${MAKE} -s tidy
 
 		if [ -s ${LOG_DIR}/${target}.ERR ] ; then
@@ -718,10 +747,20 @@ build_targets() {
 			: $((CURRENT_CNT += 1))
 			rm -f "${donep}${TOTAL_CNT}"
 			rm -f "${skipp}${TOTAL_CNT}"
-			if [ $BUILD_MANY == 1 ] ; then
-				build_target ${t} ${TOTAL_CNT} &
+			if [ "$CONTINUE" = 'y' -a -e ${LOG_DIR}/$t.MAKELOG ] ; then
+				: $((SKIP_CNT += 1))
+				touch "${donep}${TOTAL_CNT}"
+			elif [ "$REBUILD_ERRORS" = 'y' -a ! -e ${LOG_DIR}/$t.ERR ] ; then
+				: $((SKIP_CNT += 1))
+				touch "${donep}${TOTAL_CNT}"
 			else
-				build_target ${t} ${TOTAL_CNT}
+				if [ $BUILD_MANY == 1 ] ; then
+					build_target ${t} ${TOTAL_CNT} &
+				else
+					CUR_TGT="${t}"
+					build_target ${t} ${TOTAL_CNT}
+					CUR_TGT=''
+				fi
 			fi
 		fi
 
@@ -745,7 +784,11 @@ build_targets() {
 #-----------------------------------------------------------------------
 
 kill_children() {
-	kill -- "-$1"
+	local pgid=`ps -p $$ --no-headers -o "%r" | tr -d ' '`
+	local children=`pgrep -g $pgid | grep -v $$ | grep -v $pgid`
+
+	kill $children 2> /dev/null
+	wait $children 2> /dev/null
 
 	exit
 }
@@ -753,6 +796,9 @@ kill_children() {
 print_stats() {
 	if [ "$ONLY_LIST" == 'y' ] ; then return ; fi
 
+	# Only count boards that completed
+	: $((TOTAL_CNT = `find ${skipp}* 2> /dev/null | wc -l`))
+
 	rm -f ${donep}* ${skipp}*
 
 	if [ $BUILD_MANY == 1 ] && [ -e "${OUTPUT_PREFIX}/ERR" ] ; then
@@ -762,10 +808,17 @@ print_stats() {
 		WRN_LIST=`grep -riwL error ${OUTPUT_PREFIX}/ERR/`
 		WRN_LIST=`for f in $WRN_LIST ; do echo -n " $(basename $f)" ; done`
 		WRN_CNT=`echo $WRN_LIST | wc -w | awk '{print $1}'`
+	else
+		# Remove the logs for any board that was interrupted
+		rm -f ${LOG_DIR}/${CUR_TGT}.MAKELOG ${LOG_DIR}/${CUR_TGT}.ERR
 	fi
 
+	: $((TOTAL_CNT -= ${SKIP_CNT}))
 	echo ""
 	echo "--------------------- SUMMARY ----------------------------"
+	if [ "$CONTINUE" = 'y' -o "$REBUILD_ERRORS" = 'y' ] ; then
+		echo "Boards skipped: ${SKIP_CNT}"
+	fi
 	echo "Boards compiled: ${TOTAL_CNT}"
 	if [ ${ERR_CNT} -gt 0 ] ; then
 		echo "Boards with errors: ${ERR_CNT} (${ERR_LIST} )"
@@ -776,7 +829,7 @@ print_stats() {
 	echo "----------------------------------------------------------"
 
 	if [ $BUILD_MANY == 1 ] ; then
-		kill_children $$ &
+		kill_children
 	fi
 
 	exit $RC

Makefile

@@ -24,7 +24,7 @@
 VERSION = 2013
 PATCHLEVEL = 01
 SUBLEVEL =
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc2
 ifneq "$(SUBLEVEL)" ""
 U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
 else
@@ -231,8 +231,8 @@ endif
 
 OBJS  = $(CPUDIR)/start.o
 ifeq ($(CPU),x86)
-OBJS += $(CPUDIR)/start16.o
-OBJS += $(CPUDIR)/resetvec.o
+RESET_OBJS-$(CONFIG_X86_NO_RESET_VECTOR) += $(CPUDIR)/start16.o
+RESET_OBJS-$(CONFIG_X86_NO_RESET_VECTOR) += $(CPUDIR)/resetvec.o
 endif
 ifeq ($(CPU),ppc4xx)
 OBJS += $(CPUDIR)/resetvec.o
@@ -241,7 +241,7 @@ ifeq ($(CPU),mpc85xx)
 OBJS += $(CPUDIR)/resetvec.o
 endif
 
-OBJS := $(addprefix $(obj),$(OBJS))
+OBJS := $(addprefix $(obj),$(OBJS) $(RESET_OBJS-))
 
 HAVE_VENDOR_COMMON_LIB = $(if $(wildcard board/$(VENDOR)/common/Makefile),y,n)
 
@@ -293,7 +293,10 @@ LIBS-y += drivers/net/libnet.o
 LIBS-y += drivers/net/phy/libphy.o
 LIBS-y += drivers/pci/libpci.o
 LIBS-y += drivers/pcmcia/libpcmcia.o
-LIBS-y += drivers/power/libpower.o
+LIBS-y += drivers/power/libpower.o \
+	drivers/power/fuel_gauge/libfuel_gauge.o \
+	drivers/power/pmic/libpmic.o \
+	drivers/power/battery/libbattery.o
 LIBS-y += drivers/spi/libspi.o
 LIBS-y += drivers/dfu/libdfu.o
 ifeq ($(CPU),mpc83xx)
@@ -320,6 +323,7 @@ LIBS-y += drivers/usb/eth/libusb_eth.o
 LIBS-y += drivers/usb/gadget/libusb_gadget.o
 LIBS-y += drivers/usb/host/libusb_host.o
 LIBS-y += drivers/usb/musb/libusb_musb.o
+LIBS-y += drivers/usb/musb-new/libusb_musb-new.o
 LIBS-y += drivers/usb/phy/libusb_phy.o
 LIBS-y += drivers/usb/ulpi/libusb_ulpi.o
 LIBS-y += drivers/video/libvideo.o
@@ -387,12 +391,12 @@ __LIBS := $(subst $(obj),,$(LIBS)) $(subst $(obj),,$(LIBBOARD))
 ifneq ($(CONFIG_BOARD_SIZE_LIMIT),)
 BOARD_SIZE_CHECK = \
 	@actual=`wc -c $@ | awk '{print $$1}'`; \
-	limit=$(CONFIG_BOARD_SIZE_LIMIT); \
+	limit=`printf "%d" $(CONFIG_BOARD_SIZE_LIMIT)`; \
 	if test $$actual -gt $$limit; then \
-		echo "$@ exceeds file size limit:"; \
-		echo "  limit:  $$limit bytes"; \
-		echo "  actual: $$actual bytes"; \
-		echo "  excess: $$((actual - limit)) bytes"; \
+		echo "$@ exceeds file size limit:" >&2 ; \
+		echo "  limit:  $$limit bytes" >&2 ; \
+		echo "  actual: $$actual bytes" >&2 ; \
+		echo "  excess: $$((actual - limit)) bytes" >&2; \
 		exit 1; \
 	fi
 else
@@ -405,6 +409,7 @@ ALL-y += $(obj)u-boot.srec $(obj)u-boot.bin $(obj)System.map
 ALL-$(CONFIG_NAND_U_BOOT) += $(obj)u-boot-nand.bin
 ALL-$(CONFIG_ONENAND_U_BOOT) += $(obj)u-boot-onenand.bin
 ALL-$(CONFIG_SPL) += $(obj)spl/u-boot-spl.bin
+ALL-$(CONFIG_SPL) += $(obj)$(subst ",,$(CONFIG_SPL_TARGET))
 ALL-$(CONFIG_OF_SEPARATE) += $(obj)u-boot.dtb $(obj)u-boot-dtb.bin
 
 # enable combined SPL/u-boot/dtb rules for tegra
@@ -446,9 +451,18 @@ $(obj)u-boot.ldr.hex:	$(obj)u-boot.ldr
 $(obj)u-boot.ldr.srec:	$(obj)u-boot.ldr
 		$(OBJCOPY) ${OBJCFLAGS} -O srec $< $@ -I binary
 
+#
+# U-Boot entry point, needed for booting of full-blown U-Boot
+# from the SPL U-Boot version.
+#
+ifndef CONFIG_SYS_UBOOT_START
+CONFIG_SYS_UBOOT_START := 0
+endif
+
 $(obj)u-boot.img:	$(obj)u-boot.bin
 		$(obj)tools/mkimage -A $(ARCH) -T firmware -C none \
-		-O u-boot -a $(CONFIG_SYS_TEXT_BASE) -e 0 \
+		-O u-boot -a $(CONFIG_SYS_TEXT_BASE) \
+		-e $(CONFIG_SYS_UBOOT_START) \
 		-n $(shell sed -n -e 's/.*U_BOOT_VERSION//p' $(VERSION_FILE) | \
 			sed -e 's/"[	 ]*$$/ for $(BOARD) board"/') \
 		-d $< $@
@@ -472,14 +486,15 @@ $(obj)u-boot.sha1:	$(obj)u-boot.bin
 $(obj)u-boot.dis:	$(obj)u-boot
 		$(OBJDUMP) -d $< > $@
 
-$(obj)u-boot.ubl:       $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin
+$(obj)u-boot-with-spl.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin
 		$(OBJCOPY) ${OBJCFLAGS} --pad-to=$(PAD_TO) -O binary $(obj)spl/u-boot-spl $(obj)spl/u-boot-spl-pad.bin
-		cat $(obj)spl/u-boot-spl-pad.bin $(obj)u-boot.bin > $(obj)u-boot-ubl.bin
-		$(obj)tools/mkimage -n $(UBL_CONFIG) -T ublimage \
-		-e $(CONFIG_SYS_TEXT_BASE) -d $(obj)u-boot-ubl.bin $(obj)u-boot.ubl
-		rm $(obj)u-boot-ubl.bin
+		cat $(obj)spl/u-boot-spl-pad.bin $(obj)u-boot.bin > $@
 		rm $(obj)spl/u-boot-spl-pad.bin
 
+$(obj)u-boot.ubl:       $(obj)u-boot-with-spl.bin
+		$(obj)tools/mkimage -n $(UBL_CONFIG) -T ublimage \
+		-e $(CONFIG_SYS_TEXT_BASE) -d $< $(obj)u-boot.ubl
+
 $(obj)u-boot.ais:       $(obj)spl/u-boot-spl.bin $(obj)u-boot.img
 		$(obj)tools/mkimage -s -n $(if $(CONFIG_AIS_CONFIG_FILE),$(CONFIG_AIS_CONFIG_FILE),"/dev/null") \
 			-T aisimage \
@@ -496,7 +511,7 @@ $(obj)u-boot.ais:       $(obj)spl/u-boot-spl.bin $(obj)u-boot.img
 ELFTOSB_TARGET-$(CONFIG_MX28) = imx28
 
 $(obj)u-boot.sb:       $(obj)u-boot.bin $(obj)spl/u-boot-spl.bin
-		elftosb -zdf $(ELFTOSB_TARGET-y) -c $(TOPDIR)/$(CPUDIR)/$(SOC)/u-boot-$(ELFTOSB_TARGET-y).bd \
+		elftosb -zf $(ELFTOSB_TARGET-y) -c $(TOPDIR)/$(CPUDIR)/$(SOC)/u-boot-$(ELFTOSB_TARGET-y).bd \
 			-o $(obj)u-boot.sb
 
 # On x600 (SPEAr600) U-Boot is appended to U-Boot SPL.
@@ -530,6 +545,9 @@ $(obj)u-boot-$(nodtb)-tegra.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin $(dtb
 		rm $(obj)spl/u-boot-spl-pad.bin
 endif
 
+$(obj)u-boot-img.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.img
+		cat $(obj)spl/u-boot-spl.bin $(obj)u-boot.img > $@
+
 ifeq ($(CONFIG_SANDBOX),y)
 GEN_UBOOT = \
 		cd $(LNDIR) && $(CC) $(SYMS) -T $(obj)u-boot.lds \
@@ -639,6 +657,16 @@ checkthumb:
 		echo '*** Your board is configured for THUMB mode.'; \
 		false; \
 	fi
+
+# GCC 3.x is reported to have problems generating the type of relocation
+# that U-Boot wants.
+# See http://lists.denx.de/pipermail/u-boot/2012-September/135156.html
+checkgcc4:
+	@if test $(call cc-version) -lt 0400; then \
+		echo -n '*** Your GCC is too old, please upgrade to GCC 4.x or newer'; \
+		false; \
+	fi
+
 #
 # Auto-generate the autoconf.mk file (which is included by all makefiles)
 #
@@ -812,7 +840,7 @@ clean:
 	@rm -f $(obj)include/generated/asm-offsets.h
 	@rm -f $(obj)$(CPUDIR)/$(SOC)/asm-offsets.s
 	@rm -f $(TIMESTAMP_FILE) $(VERSION_FILE)
-	@$(MAKE) -C doc/DocBook/ cleandocs
+	@$(MAKE) -s -C doc/DocBook/ cleandocs
 	@find $(OBJTREE) -type f \
 		\( -name 'core' -o -name '*.bak' -o -name '*~' -o -name '*.su' \
 		-o -name '*.o'	-o -name '*.a' -o -name '*.exe'	\) -print \

README

@@ -54,6 +54,11 @@ In case of problems see the CHANGELOG and CREDITS files to find out
 who contributed the specific port. The MAINTAINERS file lists board
 maintainers.
 
+Note: There is no CHANGELOG file in the actual U-Boot source tree;
+it can be created dynamically from the Git log using:
+
+	make CHANGELOG
+
 
 Where to get help:
 ==================
@@ -810,6 +815,8 @@ The following options need to be configured:
 		CONFIG_CMD_EDITENV	  edit env variable
 		CONFIG_CMD_EEPROM	* EEPROM read/write support
 		CONFIG_CMD_ELF		* bootelf, bootvx
+		CONFIG_CMD_ENV_CALLBACK	* display details about env callbacks
+		CONFIG_CMD_ENV_FLAGS	* display details about env flags
 		CONFIG_CMD_EXPORTENV	* export the environment
 		CONFIG_CMD_EXT2		* ext2 command support
 		CONFIG_CMD_EXT4		* ext4 command support
@@ -819,8 +826,10 @@ The following options need to be configured:
 		CONFIG_CMD_FDOS		* Dos diskette Support
 		CONFIG_CMD_FLASH	  flinfo, erase, protect
 		CONFIG_CMD_FPGA		  FPGA device initialization support
+		CONFIG_CMD_GETTIME	* Get time since boot
 		CONFIG_CMD_GO		* the 'go' command (exec code)
 		CONFIG_CMD_GREPENV	* search environment
+		CONFIG_CMD_HASH		* calculate hash / digest
 		CONFIG_CMD_HWFLOW	* RTS/CTS hw flow control
 		CONFIG_CMD_I2C		* I2C serial bus support
 		CONFIG_CMD_IDE		* IDE harddisk support
@@ -855,6 +864,7 @@ The following options need to be configured:
 		CONFIG_CMD_PING		* send ICMP ECHO_REQUEST to network
 					  host
 		CONFIG_CMD_PORTIO	* Port I/O
+		CONFIG_CMD_READ		* Read raw data from partition
 		CONFIG_CMD_REGINFO	* Register dump
 		CONFIG_CMD_RUN		  run command in env variable
 		CONFIG_CMD_SAVES	* save S record dump
@@ -1409,6 +1419,13 @@ CBFS (Coreboot Filesystem) support
 		boot.  See the documentation file README.video for a
 		description of this variable.
 
+		CONFIG_VIDEO_VGA
+
+		Enable the VGA video / BIOS for x86. The alternative if you
+		are using coreboot is to use the coreboot frame buffer
+		driver.
+
+
 - Keyboard Support:
 		CONFIG_KEYBOARD
 
@@ -1469,7 +1486,6 @@ CBFS (Coreboot Filesystem) support
 		Normally display is black on white background; define
 		CONFIG_SYS_WHITE_ON_BLACK to get it inverted.
 
-
 		CONFIG_LCD_ALIGNMENT
 
 		Normally the LCD is page-aligned (tyically 4KB). If this is
@@ -1485,6 +1501,15 @@ CBFS (Coreboot Filesystem) support
 		the console jump but can help speed up operation when scrolling
 		is slow.
 
+		CONFIG_LCD_BMP_RLE8
+
+		Support drawing of RLE8-compressed bitmaps on the LCD.
+
+		CONFIG_I2C_EDID
+
+		Enables an 'i2c edid' command which can read EDID
+		information over I2C from an attached LCD display.
+
 - Splash Screen Support: CONFIG_SPLASH_SCREEN
 
 		If this option is set, the environment is checked for
@@ -2178,6 +2203,11 @@ CBFS (Coreboot Filesystem) support
 		serial# is unaffected by this, i. e. it remains
 		read-only.]
 
+		The same can be accomplished in a more flexible way
+		for any variable by configuring the type of access
+		to allow for those variables in the ".flags" variable
+		or define CONFIG_ENV_FLAGS_LIST_STATIC.
+
 - Protected RAM:
 		CONFIG_PRAM
 
@@ -2211,6 +2241,14 @@ CBFS (Coreboot Filesystem) support
 			HERMES, IP860, RPXlite, LWMON,
 			FLAGADM, TQM8260
 
+- Access to physical memory region (> 4GB)
+		Some basic support is provided for operations on memory not
+		normally accessible to U-Boot - e.g. some architectures
+		support access to more than 4GB of memory on 32-bit
+		machines using physical address extension or similar.
+		Define CONFIG_PHYSMEM to access this basic support, which
+		currently only supports clearing the memory.
+
 - Error Recovery:
 		CONFIG_PANIC_HANG
 
@@ -2400,6 +2438,23 @@ CBFS (Coreboot Filesystem) support
 		A better solution is to properly configure the firewall,
 		but sometimes that is not allowed.
 
+- Hashing support:
+		CONFIG_CMD_HASH
+
+		This enables a generic 'hash' command which can produce
+		hashes / digests from a few algorithms (e.g. SHA1, SHA256).
+
+		CONFIG_HASH_VERIFY
+
+		Enable the hash verify command (hash -v). This adds to code
+		size a little.
+
+		CONFIG_SHA1 - support SHA1 hashing
+		CONFIG_SHA256 - support SHA256 hashing
+
+		Note: There is also a sha1sum command, which should perhaps
+		be deprecated in favour of 'hash sha1'.
+
 - Show boot progress:
 		CONFIG_SHOW_BOOT_PROGRESS
 
@@ -2613,6 +2668,17 @@ FIT uImage format:
  -150	common/cmd_nand.c	Incorrect FIT image format
   151	common/cmd_nand.c	FIT image format OK
 
+- FIT image support:
+		CONFIG_FIT
+		Enable support for the FIT uImage format.
+
+		CONFIG_FIT_BEST_MATCH
+		When no configuration is explicitly selected, default to the
+		one whose fdt's compatibility field best matches that of
+		U-Boot itself. A match is considered "best" if it matches the
+		most specific compatibility entry of U-Boot's fdt's root node.
+		The order of entries in the configuration's fdt is ignored.
+
 - Standalone program support:
 		CONFIG_STANDALONE_LOAD_ADDR
 
@@ -2664,6 +2730,10 @@ FIT uImage format:
 		CONFIG_SPL_TEXT_BASE
 		TEXT_BASE for linking the SPL binary.
 
+		CONFIG_SPL_RELOC_TEXT_BASE
+		Address to relocate to.  If unspecified, this is equal to
+		CONFIG_SPL_TEXT_BASE (i.e. no relocation is done).
+
 		CONFIG_SPL_BSS_START_ADDR
 		Link address for the BSS within the SPL binary.
 
@@ -2673,6 +2743,11 @@ FIT uImage format:
 		CONFIG_SPL_STACK
 		Adress of the start of the stack SPL will use
 
+		CONFIG_SPL_RELOC_STACK
+		Adress of the start of the stack SPL will use after
+		relocation.  If unspecified, this is equal to
+		CONFIG_SPL_STACK.
+
 		CONFIG_SYS_SPL_MALLOC_START
 		Starting address of the malloc pool used in SPL.
 
@@ -2688,6 +2763,9 @@ FIT uImage format:
 		For ARM, enable an optional function to print more information
 		about the running system.
 
+		CONFIG_SPL_INIT_MINIMAL
+		Arch init code should be built for a very small image
+
 		CONFIG_SPL_LIBCOMMON_SUPPORT
 		Support for common/libcommon.o in SPL binary
 
@@ -2715,8 +2793,19 @@ FIT uImage format:
 		CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME
 		Filename to read to load U-Boot when reading from FAT
 
+		CONFIG_SPL_NAND_BASE
+		Include nand_base.c in the SPL.  Requires
+		CONFIG_SPL_NAND_DRIVERS.
+
+		CONFIG_SPL_NAND_DRIVERS
+		SPL uses normal NAND drivers, not minimal drivers.
+
+		CONFIG_SPL_NAND_ECC
+		Include standard software ECC in the SPL
+
 		CONFIG_SPL_NAND_SIMPLE
-		Support for drivers/mtd/nand/libnand.o in SPL binary
+		Support for NAND boot using simple NAND drivers that
+		expose the cmd_ctrl() interface.
 
 		CONFIG_SYS_NAND_5_ADDR_CYCLE, CONFIG_SYS_NAND_PAGE_COUNT,
 		CONFIG_SYS_NAND_PAGE_SIZE, CONFIG_SYS_NAND_OOBSIZE,
@@ -2724,15 +2813,19 @@ FIT uImage format:
 		CONFIG_SYS_NAND_ECCPOS, CONFIG_SYS_NAND_ECCSIZE,
 		CONFIG_SYS_NAND_ECCBYTES
 		Defines the size and behavior of the NAND that SPL uses
-		to read U-Boot with CONFIG_SPL_NAND_SIMPLE
+		to read U-Boot
 
 		CONFIG_SYS_NAND_U_BOOT_OFFS
-		Location in NAND for CONFIG_SPL_NAND_SIMPLE to read U-Boot
-		from.
+		Location in NAND to read U-Boot from
+
+		CONFIG_SYS_NAND_U_BOOT_DST
+		Location in memory to load U-Boot to
+
+		CONFIG_SYS_NAND_U_BOOT_SIZE
+		Size of image to load
 
 		CONFIG_SYS_NAND_U_BOOT_START
-		Location in memory for CONFIG_SPL_NAND_SIMPLE to load U-Boot
-		to.
+		Entry point in loaded image to jump to
 
 		CONFIG_SYS_NAND_HW_ECC_OOBFIRST
 		Define this if you need to first read the OOB and then the
@@ -2757,6 +2850,11 @@ FIT uImage format:
 		CONFIG_SPL_LIBGENERIC_SUPPORT
 		Support for lib/libgeneric.o in SPL binary
 
+		CONFIG_SPL_TARGET
+		Final target image containing SPL and payload.  Some SPLs
+		use an arch-specific makefile fragment instead, for
+		example if more than one image needs to be produced.
+
 Modem Support:
 --------------
 
@@ -2891,9 +2989,6 @@ Configuration Settings:
 		non page size aligned address and this could cause major
 		problems.
 
-- CONFIG_SYS_TFTP_LOADADDR:
-		Default load address for network file downloads
-
 - CONFIG_SYS_LOADS_BAUD_CHANGE:
 		Enable temporary baudrate change while serial download
 
@@ -3035,6 +3130,49 @@ Configuration Settings:
 	cases. This setting can be used to tune behaviour; see
 	lib/hashtable.c for details.
 
+- CONFIG_ENV_FLAGS_LIST_DEFAULT
+- CONFIG_ENV_FLAGS_LIST_STATIC
+	Enable validation of the values given to enviroment variables when
+	calling env set.  Variables can be restricted to only decimal,
+	hexadecimal, or boolean.  If CONFIG_CMD_NET is also defined,
+	the variables can also be restricted to IP address or MAC address.
+
+	The format of the list is:
+		type_attribute = [s|d|x|b|i|m]
+		access_atribute = [a|r|o|c]
+		attributes = type_attribute[access_atribute]
+		entry = variable_name[:attributes]
+		list = entry[,list]
+
+	The type attributes are:
+		s - String (default)
+		d - Decimal
+		x - Hexadecimal
+		b - Boolean ([1yYtT|0nNfF])
+		i - IP address
+		m - MAC address
+
+	The access attributes are:
+		a - Any (default)
+		r - Read-only
+		o - Write-once
+		c - Change-default
+
+	- CONFIG_ENV_FLAGS_LIST_DEFAULT
+		Define this to a list (string) to define the ".flags"
+		envirnoment variable in the default or embedded environment.
+
+	- CONFIG_ENV_FLAGS_LIST_STATIC
+		Define this to a list (string) to define validation that
+		should be done if an entry is not found in the ".flags"
+		environment variable.  To override a setting in the static
+		list, simply add an entry for the same variable name to the
+		".flags" variable.
+
+- CONFIG_ENV_ACCESS_IGNORE_FORCE
+	If defined, don't allow the -f switch to env set override variable
+	access flags.
+
 The following definitions that deal with the placement and management
 of environment data (variable area); in general, we support the
 following configurations:
@@ -3632,6 +3770,16 @@ Low Level (hardware related) configuration options:
 		be used if available. These functions may be faster under some
 		conditions but may increase the binary size.
 
+- CONFIG_X86_NO_RESET_VECTOR
+		If defined, the x86 reset vector code is excluded. You will need
+		to do this when U-Boot is running from Coreboot.
+
+- CONFIG_X86_NO_REAL_MODE
+		If defined, x86 real mode code is omitted. This assumes a
+		32-bit environment where such code is not needed. You will
+		need to do this when U-Boot is running from Coreboot.
+
+
 Freescale QE/FMAN Firmware Support:
 -----------------------------------
 
@@ -3859,6 +4007,7 @@ saveenv - save environment variables to persistent storage
 protect - enable or disable FLASH write protection
 erase	- erase FLASH memory
 flinfo	- print FLASH memory information
+nand	- NAND memory operations (see doc/README.nand)
 bdinfo	- print Board Info structure
 iminfo	- print header information for application image
 coninfo - print console devices and informations
@@ -4125,6 +4274,36 @@ Please note that changes to some configuration parameters may take
 only effect after the next boot (yes, that's just like Windoze :-).
 
 
+Callback functions for environment variables:
+---------------------------------------------
+
+For some environment variables, the behavior of u-boot needs to change
+when their values are changed.  This functionailty allows functions to
+be associated with arbitrary variables.  On creation, overwrite, or
+deletion, the callback will provide the opportunity for some side
+effect to happen or for the change to be rejected.
+
+The callbacks are named and associated with a function using the
+U_BOOT_ENV_CALLBACK macro in your board or driver code.
+
+These callbacks are associated with variables in one of two ways.  The
+static list can be added to by defining CONFIG_ENV_CALLBACK_LIST_STATIC
+in the board configuration to a string that defines a list of
+associations.  The list must be in the following format:
+
+	entry = variable_name[:callback_name]
+	list = entry[,list]
+
+If the callback name is not specified, then the callback is deleted.
+Spaces are also allowed anywhere in the list.
+
+Callbacks can also be associated by defining the ".callbacks" variable
+with the same list format above.  Any association in ".callbacks" will
+override any association in the static list. You can define
+CONFIG_ENV_CALLBACK_LIST_DEFAULT to a list (string) to define the
+".callbacks" envirnoment variable in the default or embedded environment.
+
+
 Command Line Parsing:
 =====================
 

arch/arm/cpu/arm926ejs/mxs/clock.c

@@ -333,6 +333,8 @@ uint32_t mxc_get_clock(enum mxc_clock clk)
 		return mx28_get_sspclk(MXC_SSPCLK2);
 	case MXC_SSP3_CLK:
 		return mx28_get_sspclk(MXC_SSPCLK3);
+	case MXC_XTAL_CLK:
+		return XTAL_FREQ_KHZ * 1000;
 	}
 
 	return 0;

arch/arm/cpu/arm926ejs/mxs/spl_boot.c

@@ -50,7 +50,7 @@ void early_delay(int delay)
 }
 
 #define	MUX_CONFIG_BOOTMODE_PAD	(MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_NOPULL)
-const iomux_cfg_t iomux_boot[] = {
+static const iomux_cfg_t iomux_boot[] = {
 	MX28_PAD_LCD_D00__GPIO_1_0 | MUX_CONFIG_BOOTMODE_PAD,
 	MX28_PAD_LCD_D01__GPIO_1_1 | MUX_CONFIG_BOOTMODE_PAD,
 	MX28_PAD_LCD_D02__GPIO_1_2 | MUX_CONFIG_BOOTMODE_PAD,
@@ -59,7 +59,7 @@ const iomux_cfg_t iomux_boot[] = {
 	MX28_PAD_LCD_D05__GPIO_1_5 | MUX_CONFIG_BOOTMODE_PAD,
 };
 
-uint8_t mxs_get_bootmode_index(void)
+static uint8_t mxs_get_bootmode_index(void)
 {
 	uint8_t bootmode = 0;
 	int i;

arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c

@@ -30,7 +30,11 @@
 
 #include "mxs_init.h"
 
-static uint32_t mx28_dram_vals[] = {
+static uint32_t dram_vals[] = {
+/*
+ * i.MX28 DDR2 at 200MHz
+ */
+#if defined(CONFIG_MX28)
 	0x00000000, 0x00000000, 0x00000000, 0x00000000,
 	0x00000000, 0x00000000, 0x00000000, 0x00000000,
 	0x00000000, 0x00000000, 0x00000000, 0x00000000,
@@ -79,6 +83,9 @@ static uint32_t mx28_dram_vals[] = {
 	0x06120612, 0x04320432, 0x04320432, 0x00040004,
 	0x00040004, 0x00000000, 0x00000000, 0x00000000,
 	0x00000000, 0x00010001
+#else
+#error Unsupported memory initialization
+#endif
 };
 
 void __mxs_adjust_memory_params(uint32_t *dram_vals)
@@ -87,17 +94,17 @@ void __mxs_adjust_memory_params(uint32_t *dram_vals)
 void mxs_adjust_memory_params(uint32_t *dram_vals)
 	__attribute__((weak, alias("__mxs_adjust_memory_params")));
 
-void init_mx28_200mhz_ddr2(void)
+static void initialize_dram_values(void)
 {
 	int i;
 
-	mxs_adjust_memory_params(mx28_dram_vals);
+	mxs_adjust_memory_params(dram_vals);
 
-	for (i = 0; i < ARRAY_SIZE(mx28_dram_vals); i++)
-		writel(mx28_dram_vals[i], MXS_DRAM_BASE + (4 * i));
+	for (i = 0; i < ARRAY_SIZE(dram_vals); i++)
+		writel(dram_vals[i], MXS_DRAM_BASE + (4 * i));
 }
 
-void mxs_mem_init_clock(void)
+static void mxs_mem_init_clock(void)
 {
 	struct mxs_clkctrl_regs *clkctrl_regs =
 		(struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE;
@@ -128,7 +135,7 @@ void mxs_mem_init_clock(void)
 	early_delay(10000);
 }
 
-void mxs_mem_setup_cpu_and_hbus(void)
+static void mxs_mem_setup_cpu_and_hbus(void)
 {
 	struct mxs_clkctrl_regs *clkctrl_regs =
 		(struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE;
@@ -160,7 +167,7 @@ void mxs_mem_setup_cpu_and_hbus(void)
 	early_delay(15000);
 }
 
-void mxs_mem_setup_vdda(void)
+static void mxs_mem_setup_vdda(void)
 {
 	struct mxs_power_regs *power_regs =
 		(struct mxs_power_regs *)MXS_POWER_BASE;
@@ -171,17 +178,6 @@ void mxs_mem_setup_vdda(void)
 		&power_regs->hw_power_vddactrl);
 }
 
-void mxs_mem_setup_vddd(void)
-{
-	struct mxs_power_regs *power_regs =
-		(struct mxs_power_regs *)MXS_POWER_BASE;
-
-	writel((0x1c << POWER_VDDDCTRL_TRG_OFFSET) |
-		(0x7 << POWER_VDDDCTRL_BO_OFFSET_OFFSET) |
-		POWER_VDDDCTRL_LINREG_OFFSET_1STEPS_BELOW,
-		&power_regs->hw_power_vdddctrl);
-}
-
 uint32_t mxs_mem_get_size(void)
 {
 	uint32_t sz, da;
@@ -229,7 +225,7 @@ void mxs_mem_init(void)
 	/* Clear START bit from DRAM_CTL16 */
 	clrbits_le32(MXS_DRAM_BASE + 0x40, 1);
 
-	init_mx28_200mhz_ddr2();
+	initialize_dram_values();
 
 	/* Clear SREFRESH bit from DRAM_CTL17 */
 	clrbits_le32(MXS_DRAM_BASE + 0x44, 1);
@@ -241,8 +237,6 @@ void mxs_mem_init(void)
 	while (!(readl(MXS_DRAM_BASE + 0xe8) & (1 << 20)))
 		;
 
-	mxs_mem_setup_vddd();
-
 	early_delay(10000);
 
 	mxs_mem_setup_cpu_and_hbus();

arch/arm/cpu/arm926ejs/mxs/spl_power_init.c

@@ -30,7 +30,7 @@
 
 #include "mxs_init.h"
 
-void mxs_power_clock2xtal(void)
+static void mxs_power_clock2xtal(void)
 {
 	struct mxs_clkctrl_regs *clkctrl_regs =
 		(struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE;
@@ -40,7 +40,7 @@ void mxs_power_clock2xtal(void)
 		&clkctrl_regs->hw_clkctrl_clkseq_set);
 }
 
-void mxs_power_clock2pll(void)
+static void mxs_power_clock2pll(void)
 {
 	struct mxs_clkctrl_regs *clkctrl_regs =
 		(struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE;
@@ -52,7 +52,7 @@ void mxs_power_clock2pll(void)
 			CLKCTRL_CLKSEQ_BYPASS_CPU);
 }
 
-void mxs_power_clear_auto_restart(void)
+static void mxs_power_clear_auto_restart(void)
 {
 	struct mxs_rtc_regs *rtc_regs =
 		(struct mxs_rtc_regs *)MXS_RTC_BASE;
@@ -85,7 +85,7 @@ void mxs_power_clear_auto_restart(void)
 		;
 }
 
-void mxs_power_set_linreg(void)
+static void mxs_power_set_linreg(void)
 {
 	struct mxs_power_regs *power_regs =
 		(struct mxs_power_regs *)MXS_POWER_BASE;
@@ -104,7 +104,7 @@ void mxs_power_set_linreg(void)
 			POWER_VDDIOCTRL_LINREG_OFFSET_1STEPS_BELOW);
 }
 
-int mxs_get_batt_volt(void)
+static int mxs_get_batt_volt(void)
 {
 	struct mxs_power_regs *power_regs =
 		(struct mxs_power_regs *)MXS_POWER_BASE;
@@ -115,12 +115,12 @@ int mxs_get_batt_volt(void)
 	return volt;
 }
 
-int mxs_is_batt_ready(void)
+static int mxs_is_batt_ready(void)
 {
 	return (mxs_get_batt_volt() >= 3600);
 }
 
-int mxs_is_batt_good(void)
+static int mxs_is_batt_good(void)
 {
 	struct mxs_power_regs *power_regs =
 		(struct mxs_power_regs *)MXS_POWER_BASE;
@@ -160,7 +160,7 @@ int mxs_is_batt_good(void)
 	return 0;
 }
 
-void mxs_power_setup_5v_detect(void)
+static void mxs_power_setup_5v_detect(void)
 {
 	struct mxs_power_regs *power_regs =
 		(struct mxs_power_regs *)MXS_POWER_BASE;
@@ -172,7 +172,7 @@ void mxs_power_setup_5v_detect(void)
 			POWER_5VCTRL_PWRUP_VBUS_CMPS);
 }
 
-void mxs_src_power_init(void)
+static void mxs_src_power_init(void)
 {
 	struct mxs_power_regs *power_regs =
 		(struct mxs_power_regs *)MXS_POWER_BASE;
@@ -203,7 +203,7 @@ void mxs_src_power_init(void)
 	clrbits_le32(&power_regs->hw_power_5vctrl, POWER_5VCTRL_DCDC_XFER);
 }
 
-void mxs_power_init_4p2_params(void)
+static void mxs_power_init_4p2_params(void)
 {
 	struct mxs_power_regs *power_regs =
 		(struct mxs_power_regs *)MXS_POWER_BASE;
@@ -227,7 +227,7 @@ void mxs_power_init_4p2_params(void)
 		0x3f << POWER_5VCTRL_CHARGE_4P2_ILIMIT_OFFSET);
 }
 
-void mxs_enable_4p2_dcdc_input(int xfer)
+static void mxs_enable_4p2_dcdc_input(int xfer)
 {
 	struct mxs_power_regs *power_regs =
 		(struct mxs_power_regs *)MXS_POWER_BASE;
@@ -323,7 +323,7 @@ void mxs_enable_4p2_dcdc_input(int xfer)
 				POWER_CTRL_ENIRQ_VDD5V_DROOP);
 }
 
-void mxs_power_init_4p2_regulator(void)
+static void mxs_power_init_4p2_regulator(void)
 {
 	struct mxs_power_regs *power_regs =
 		(struct mxs_power_regs *)MXS_POWER_BASE;
@@ -407,7 +407,7 @@ void mxs_power_init_4p2_regulator(void)
 	writel(POWER_CTRL_DCDC4P2_BO_IRQ, &power_regs->hw_power_ctrl_clr);
 }
 
-void mxs_power_init_dcdc_4p2_source(void)
+static void mxs_power_init_dcdc_4p2_source(void)
 {
 	struct mxs_power_regs *power_regs =
 		(struct mxs_power_regs *)MXS_POWER_BASE;
@@ -429,7 +429,7 @@ void mxs_power_init_dcdc_4p2_source(void)
 	}
 }
 
-void mxs_power_enable_4p2(void)
+static void mxs_power_enable_4p2(void)
 {
 	struct mxs_power_regs *power_regs =
 		(struct mxs_power_regs *)MXS_POWER_BASE;
@@ -488,7 +488,7 @@ void mxs_power_enable_4p2(void)
 			&power_regs->hw_power_charge_clr);
 }
 
-void mxs_boot_valid_5v(void)
+static void mxs_boot_valid_5v(void)
 {
 	struct mxs_power_regs *power_regs =
 		(struct mxs_power_regs *)MXS_POWER_BASE;
@@ -511,7 +511,7 @@ void mxs_boot_valid_5v(void)
 	mxs_power_enable_4p2();
 }
 
-void mxs_powerdown(void)
+static void mxs_powerdown(void)
 {
 	struct mxs_power_regs *power_regs =
 		(struct mxs_power_regs *)MXS_POWER_BASE;
@@ -520,7 +520,7 @@ void mxs_powerdown(void)
 		&power_regs->hw_power_reset);
 }
 
-void mxs_batt_boot(void)
+static void mxs_batt_boot(void)
 {
 	struct mxs_power_regs *power_regs =
 		(struct mxs_power_regs *)MXS_POWER_BASE;
@@ -564,7 +564,7 @@ void mxs_batt_boot(void)
 		0x8 << POWER_5VCTRL_CHARGE_4P2_ILIMIT_OFFSET);
 }
 
-void mxs_handle_5v_conflict(void)
+static void mxs_handle_5v_conflict(void)
 {
 	struct mxs_power_regs *power_regs =
 		(struct mxs_power_regs *)MXS_POWER_BASE;
@@ -600,7 +600,7 @@ void mxs_handle_5v_conflict(void)
 	}
 }
 
-void mxs_5v_boot(void)
+static void mxs_5v_boot(void)
 {
 	struct mxs_power_regs *power_regs =
 		(struct mxs_power_regs *)MXS_POWER_BASE;
@@ -623,7 +623,7 @@ void mxs_5v_boot(void)
 	mxs_handle_5v_conflict();
 }
 
-void mxs_init_batt_bo(void)
+static void mxs_init_batt_bo(void)
 {
 	struct mxs_power_regs *power_regs =
 		(struct mxs_power_regs *)MXS_POWER_BASE;
@@ -637,7 +637,7 @@ void mxs_init_batt_bo(void)
 	writel(POWER_CTRL_ENIRQ_BATT_BO, &power_regs->hw_power_ctrl_clr);
 }
 
-void mxs_switch_vddd_to_dcdc_source(void)
+static void mxs_switch_vddd_to_dcdc_source(void)
 {
 	struct mxs_power_regs *power_regs =
 		(struct mxs_power_regs *)MXS_POWER_BASE;
@@ -651,7 +651,7 @@ void mxs_switch_vddd_to_dcdc_source(void)
 		POWER_VDDDCTRL_DISABLE_STEPPING);
 }
 
-void mxs_power_configure_power_source(void)
+static void mxs_power_configure_power_source(void)
 {
 	int batt_ready, batt_good;
 	struct mxs_power_regs *power_regs =
@@ -689,7 +689,7 @@ void mxs_power_configure_power_source(void)
 	mxs_switch_vddd_to_dcdc_source();
 }
 
-void mxs_enable_output_rail_protection(void)
+static void mxs_enable_output_rail_protection(void)
 {
 	struct mxs_power_regs *power_regs =
 		(struct mxs_power_regs *)MXS_POWER_BASE;
@@ -707,7 +707,7 @@ void mxs_enable_output_rail_protection(void)
 			POWER_VDDIOCTRL_PWDN_BRNOUT);
 }
 
-int mxs_get_vddio_power_source_off(void)
+static int mxs_get_vddio_power_source_off(void)
 {
 	struct mxs_power_regs *power_regs =
 		(struct mxs_power_regs *)MXS_POWER_BASE;
@@ -735,7 +735,7 @@ int mxs_get_vddio_power_source_off(void)
 
 }
 
-int mxs_get_vddd_power_source_off(void)
+static int mxs_get_vddd_power_source_off(void)
 {
 	struct mxs_power_regs *power_regs =
 		(struct mxs_power_regs *)MXS_POWER_BASE;
@@ -766,201 +766,115 @@ int mxs_get_vddd_power_source_off(void)
 	return 0;
 }
 
-void mxs_power_set_vddio(uint32_t new_target, uint32_t new_brownout)
+struct mxs_vddx_cfg {
+	uint32_t		*reg;
+	uint8_t			step_mV;
+	uint16_t		lowest_mV;
+	int			(*powered_by_linreg)(void);
+	uint32_t		trg_mask;
+	uint32_t		bo_irq;
+	uint32_t		bo_enirq;
+	uint32_t		bo_offset_mask;
+	uint32_t		bo_offset_offset;
+};
+
+static const struct mxs_vddx_cfg mxs_vddio_cfg = {
+	.reg			= &(((struct mxs_power_regs *)MXS_POWER_BASE)->
+					hw_power_vddioctrl),
+	.step_mV		= 50,
+	.lowest_mV		= 2800,
+	.powered_by_linreg	= mxs_get_vddio_power_source_off,
+	.trg_mask		= POWER_VDDIOCTRL_TRG_MASK,
+	.bo_irq			= POWER_CTRL_VDDIO_BO_IRQ,
+	.bo_enirq		= POWER_CTRL_ENIRQ_VDDIO_BO,
+	.bo_offset_mask		= POWER_VDDIOCTRL_BO_OFFSET_MASK,
+	.bo_offset_offset	= POWER_VDDIOCTRL_BO_OFFSET_OFFSET,
+};
+
+static const struct mxs_vddx_cfg mxs_vddd_cfg = {
+	.reg			= &(((struct mxs_power_regs *)MXS_POWER_BASE)->
+					hw_power_vdddctrl),
+	.step_mV		= 25,
+	.lowest_mV		= 800,
+	.powered_by_linreg	= mxs_get_vddd_power_source_off,
+	.trg_mask		= POWER_VDDDCTRL_TRG_MASK,
+	.bo_irq			= POWER_CTRL_VDDD_BO_IRQ,
+	.bo_enirq		= POWER_CTRL_ENIRQ_VDDD_BO,
+	.bo_offset_mask		= POWER_VDDDCTRL_BO_OFFSET_MASK,
+	.bo_offset_offset	= POWER_VDDDCTRL_BO_OFFSET_OFFSET,
+};
+
+static void mxs_power_set_vddx(const struct mxs_vddx_cfg *cfg,
+				uint32_t new_target, uint32_t new_brownout)
 {
 	struct mxs_power_regs *power_regs =
 		(struct mxs_power_regs *)MXS_POWER_BASE;
 	uint32_t cur_target, diff, bo_int = 0;
 	uint32_t powered_by_linreg = 0;
+	int adjust_up, tmp;
 
-	new_brownout = (new_target - new_brownout + 25) / 50;
+	new_brownout = DIV_ROUND(new_target - new_brownout, cfg->step_mV);
 
-	cur_target = readl(&power_regs->hw_power_vddioctrl);
-	cur_target &= POWER_VDDIOCTRL_TRG_MASK;
-	cur_target *= 50;	/* 50 mV step*/
-	cur_target += 2800;	/* 2800 mV lowest */
+	cur_target = readl(cfg->reg);
+	cur_target &= cfg->trg_mask;
+	cur_target *= cfg->step_mV;
+	cur_target += cfg->lowest_mV;
 
-	powered_by_linreg = mxs_get_vddio_power_source_off();
-	if (new_target > cur_target) {
+	adjust_up = new_target > cur_target;
+	powered_by_linreg = cfg->powered_by_linreg();
 
+	if (adjust_up) {
 		if (powered_by_linreg) {
-			bo_int = readl(&power_regs->hw_power_vddioctrl);
-			clrbits_le32(&power_regs->hw_power_vddioctrl,
-					POWER_CTRL_ENIRQ_VDDIO_BO);
+			bo_int = readl(cfg->reg);
+			clrbits_le32(cfg->reg, cfg->bo_enirq);
 		}
+		setbits_le32(cfg->reg, cfg->bo_offset_mask);
+	}
 
-		setbits_le32(&power_regs->hw_power_vddioctrl,
-				POWER_VDDIOCTRL_BO_OFFSET_MASK);
-		do {
-			if (new_target - cur_target > 100)
+	do {
+		if (abs(new_target - cur_target) > 100) {
+			if (adjust_up)
 				diff = cur_target + 100;
 			else
-				diff = new_target;
-
-			diff -= 2800;
-			diff /= 50;
-
-			clrsetbits_le32(&power_regs->hw_power_vddioctrl,
-				POWER_VDDIOCTRL_TRG_MASK, diff);
-
-			if (powered_by_linreg ||
-				(readl(&power_regs->hw_power_sts) &
-					POWER_STS_VDD5V_GT_VDDIO))
-				early_delay(500);
-			else {
-				while (!(readl(&power_regs->hw_power_sts) &
-					POWER_STS_DC_OK))
-					;
-
-			}
-
-			cur_target = readl(&power_regs->hw_power_vddioctrl);
-			cur_target &= POWER_VDDIOCTRL_TRG_MASK;
-			cur_target *= 50;	/* 50 mV step*/
-			cur_target += 2800;	/* 2800 mV lowest */
-		} while (new_target > cur_target);
-
-		if (powered_by_linreg) {
-			writel(POWER_CTRL_VDDIO_BO_IRQ,
-				&power_regs->hw_power_ctrl_clr);
-			if (bo_int & POWER_CTRL_ENIRQ_VDDIO_BO)
-				setbits_le32(&power_regs->hw_power_vddioctrl,
-						POWER_CTRL_ENIRQ_VDDIO_BO);
-		}
-	} else {
-		do {
-			if (cur_target - new_target > 100)
 				diff = cur_target - 100;
-			else
-				diff = new_target;
-
-			diff -= 2800;
-			diff /= 50;
-
-			clrsetbits_le32(&power_regs->hw_power_vddioctrl,
-				POWER_VDDIOCTRL_TRG_MASK, diff);
-
-			if (powered_by_linreg ||
-				(readl(&power_regs->hw_power_sts) &
-					POWER_STS_VDD5V_GT_VDDIO))
-				early_delay(500);
-			else {
-				while (!(readl(&power_regs->hw_power_sts) &
-					POWER_STS_DC_OK))
-					;
-
-			}
-
-			cur_target = readl(&power_regs->hw_power_vddioctrl);
-			cur_target &= POWER_VDDIOCTRL_TRG_MASK;
-			cur_target *= 50;	/* 50 mV step*/
-			cur_target += 2800;	/* 2800 mV lowest */
-		} while (new_target < cur_target);
-	}
-
-	clrsetbits_le32(&power_regs->hw_power_vddioctrl,
-			POWER_VDDIOCTRL_BO_OFFSET_MASK,
-			new_brownout << POWER_VDDIOCTRL_BO_OFFSET_OFFSET);
-}
-
-void mxs_power_set_vddd(uint32_t new_target, uint32_t new_brownout)
-{
-	struct mxs_power_regs *power_regs =
-		(struct mxs_power_regs *)MXS_POWER_BASE;
-	uint32_t cur_target, diff, bo_int = 0;
-	uint32_t powered_by_linreg = 0;
-
-	new_brownout = (new_target - new_brownout + 12) / 25;
-
-	cur_target = readl(&power_regs->hw_power_vdddctrl);
-	cur_target &= POWER_VDDDCTRL_TRG_MASK;
-	cur_target *= 25;	/* 25 mV step*/
-	cur_target += 800;	/* 800 mV lowest */
-
-	powered_by_linreg = mxs_get_vddd_power_source_off();
-	if (new_target > cur_target) {
-		if (powered_by_linreg) {
-			bo_int = readl(&power_regs->hw_power_vdddctrl);
-			clrbits_le32(&power_regs->hw_power_vdddctrl,
-					POWER_CTRL_ENIRQ_VDDD_BO);
+		} else {
+			diff = new_target;
 		}
 
-		setbits_le32(&power_regs->hw_power_vdddctrl,
-				POWER_VDDDCTRL_BO_OFFSET_MASK);
-
-		do {
-			if (new_target - cur_target > 100)
-				diff = cur_target + 100;
-			else
-				diff = new_target;
-
-			diff -= 800;
-			diff /= 25;
-
-			clrsetbits_le32(&power_regs->hw_power_vdddctrl,
-				POWER_VDDDCTRL_TRG_MASK, diff);
+		diff -= cfg->lowest_mV;
+		diff /= cfg->step_mV;
 
-			if (powered_by_linreg ||
-				(readl(&power_regs->hw_power_sts) &
-					POWER_STS_VDD5V_GT_VDDIO))
-				early_delay(500);
-			else {
-				while (!(readl(&power_regs->hw_power_sts) &
-					POWER_STS_DC_OK))
-					;
+		clrsetbits_le32(cfg->reg, cfg->trg_mask, diff);
 
+		if (powered_by_linreg ||
+			(readl(&power_regs->hw_power_sts) &
+				POWER_STS_VDD5V_GT_VDDIO))
+			early_delay(500);
+		else {
+			for (;;) {
+				tmp = readl(&power_regs->hw_power_sts);
+				if (tmp & POWER_STS_DC_OK)
+					break;
 			}
-
-			cur_target = readl(&power_regs->hw_power_vdddctrl);
-			cur_target &= POWER_VDDDCTRL_TRG_MASK;
-			cur_target *= 25;	/* 25 mV step*/
-			cur_target += 800;	/* 800 mV lowest */
-		} while (new_target > cur_target);
-
-		if (powered_by_linreg) {
-			writel(POWER_CTRL_VDDD_BO_IRQ,
-				&power_regs->hw_power_ctrl_clr);
-			if (bo_int & POWER_CTRL_ENIRQ_VDDD_BO)
-				setbits_le32(&power_regs->hw_power_vdddctrl,
-						POWER_CTRL_ENIRQ_VDDD_BO);
 		}
-	} else {
-		do {
-			if (cur_target - new_target > 100)
-				diff = cur_target - 100;
-			else
-				diff = new_target;
 
-			diff -= 800;
-			diff /= 25;
+		cur_target = readl(cfg->reg);
+		cur_target &= cfg->trg_mask;
+		cur_target *= cfg->step_mV;
+		cur_target += cfg->lowest_mV;
+	} while (new_target > cur_target);
 
-			clrsetbits_le32(&power_regs->hw_power_vdddctrl,
-					POWER_VDDDCTRL_TRG_MASK, diff);
-
-			if (powered_by_linreg ||
-				(readl(&power_regs->hw_power_sts) &
-					POWER_STS_VDD5V_GT_VDDIO))
-				early_delay(500);
-			else {
-				while (!(readl(&power_regs->hw_power_sts) &
-					POWER_STS_DC_OK))
-					;
-
-			}
-
-			cur_target = readl(&power_regs->hw_power_vdddctrl);
-			cur_target &= POWER_VDDDCTRL_TRG_MASK;
-			cur_target *= 25;	/* 25 mV step*/
-			cur_target += 800;	/* 800 mV lowest */
-		} while (new_target < cur_target);
+	if (adjust_up && powered_by_linreg) {
+		writel(cfg->bo_irq, &power_regs->hw_power_ctrl_clr);
+		if (bo_int & cfg->bo_enirq)
+			setbits_le32(cfg->reg, cfg->bo_enirq);
 	}
 
-	clrsetbits_le32(&power_regs->hw_power_vdddctrl,
-			POWER_VDDDCTRL_BO_OFFSET_MASK,
-			new_brownout << POWER_VDDDCTRL_BO_OFFSET_OFFSET);
+	clrsetbits_le32(cfg->reg, cfg->bo_offset_mask,
+			new_brownout << cfg->bo_offset_offset);
 }
 
-void mxs_setup_batt_detect(void)
+static void mxs_setup_batt_detect(void)
 {
 	mxs_lradc_init();
 	mxs_lradc_enable_batt_measurement();
@@ -982,9 +896,8 @@ void mxs_power_init(void)
 	mxs_power_configure_power_source();
 	mxs_enable_output_rail_protection();
 
-	mxs_power_set_vddio(3300, 3150);
-
-	mxs_power_set_vddd(1350, 1200);
+	mxs_power_set_vddx(&mxs_vddio_cfg, 3300, 3150);
+	mxs_power_set_vddx(&mxs_vddd_cfg, 1500, 1000);
 
 	writel(POWER_CTRL_VDDD_BO_IRQ | POWER_CTRL_VDDA_BO_IRQ |
 		POWER_CTRL_VDDIO_BO_IRQ | POWER_CTRL_VDD5V_DROOP_IRQ |

arch/arm/cpu/armv7/am33xx/board.c

@@ -33,6 +33,11 @@
 #include <i2c.h>
 #include <miiphy.h>
 #include <cpsw.h>
+#include <asm/errno.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/musb.h>
+#include <asm/omap_musb.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -63,3 +68,83 @@ void setup_clocks_for_console(void)
 	/* Not yet implemented */
 	return;
 }
+
+/* AM33XX has two MUSB controllers which can be host or gadget */
+#if (defined(CONFIG_MUSB_GADGET) || defined(CONFIG_MUSB_HOST)) && \
+	(defined(CONFIG_AM335X_USB0) || defined(CONFIG_AM335X_USB1))
+static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
+
+/* USB 2.0 PHY Control */
+#define CM_PHY_PWRDN			(1 << 0)
+#define CM_PHY_OTG_PWRDN		(1 << 1)
+#define OTGVDET_EN			(1 << 19)
+#define OTGSESSENDEN			(1 << 20)
+
+static void am33xx_usb_set_phy_power(u8 on, u32 *reg_addr)
+{
+	if (on) {
+		clrsetbits_le32(reg_addr, CM_PHY_PWRDN | CM_PHY_OTG_PWRDN,
+				OTGVDET_EN | OTGSESSENDEN);
+	} else {
+		clrsetbits_le32(reg_addr, 0, CM_PHY_PWRDN | CM_PHY_OTG_PWRDN);
+	}
+}
+
+static struct musb_hdrc_config musb_config = {
+	.multipoint     = 1,
+	.dyn_fifo       = 1,
+	.num_eps        = 16,
+	.ram_bits       = 12,
+};
+
+#ifdef CONFIG_AM335X_USB0
+static void am33xx_otg0_set_phy_power(u8 on)
+{
+	am33xx_usb_set_phy_power(on, &cdev->usb_ctrl0);
+}
+
+struct omap_musb_board_data otg0_board_data = {
+	.set_phy_power = am33xx_otg0_set_phy_power,
+};
+
+static struct musb_hdrc_platform_data otg0_plat = {
+	.mode           = CONFIG_AM335X_USB0_MODE,
+	.config         = &musb_config,
+	.power          = 50,
+	.platform_ops	= &musb_dsps_ops,
+	.board_data	= &otg0_board_data,
+};
+#endif
+
+#ifdef CONFIG_AM335X_USB1
+static void am33xx_otg1_set_phy_power(u8 on)
+{
+	am33xx_usb_set_phy_power(on, &cdev->usb_ctrl1);
+}
+
+struct omap_musb_board_data otg1_board_data = {
+	.set_phy_power = am33xx_otg1_set_phy_power,
+};
+
+static struct musb_hdrc_platform_data otg1_plat = {
+	.mode           = CONFIG_AM335X_USB1_MODE,
+	.config         = &musb_config,
+	.power          = 50,
+	.platform_ops	= &musb_dsps_ops,
+	.board_data	= &otg1_board_data,
+};
+#endif
+#endif
+
+int arch_misc_init(void)
+{
+#ifdef CONFIG_AM335X_USB0
+	musb_register(&otg0_plat, &otg0_board_data,
+		(void *)AM335X_USB0_OTG_BASE);
+#endif
+#ifdef CONFIG_AM335X_USB1
+	musb_register(&otg1_plat, &otg1_board_data,
+		(void *)AM335X_USB1_OTG_BASE);
+#endif
+	return 0;
+}

arch/arm/cpu/armv7/am33xx/clock.c

@@ -40,6 +40,7 @@
 #define CLK_MODE_MASK		0xfffffff8
 #define CLK_DIV_SEL		0xFFFFFFE0
 #define CPGMAC0_IDLE		0x30000
+#define DPLL_CLKDCOLDO_GATE_CTRL        0x300
 
 const struct cm_perpll *cmper = (struct cm_perpll *)CM_PER;
 const struct cm_wkuppll *cmwkup = (struct cm_wkuppll *)CM_WKUP;
@@ -194,6 +195,11 @@ static void enable_per_clocks(void)
 	writel(PRCM_MOD_EN, &cmrtc->rtcclkctrl);
 	while (readl(&cmrtc->rtcclkctrl) != PRCM_MOD_EN)
 		;
+
+	/* MUSB */
+	writel(PRCM_MOD_EN, &cmper->usb0clkctrl);
+	while (readl(&cmper->usb0clkctrl) != PRCM_MOD_EN)
+		;
 }
 
 static void mpu_pll_config(void)
@@ -290,6 +296,8 @@ static void per_pll_config(void)
 
 	while (readl(&cmwkup->idlestdpllper) != ST_DPLL_CLK)
 		;
+
+	writel(DPLL_CLKDCOLDO_GATE_CTRL, &cmwkup->clkdcoldodpllper);
 }
 
 void ddr_pll_config(unsigned int ddrpll_m)

arch/arm/cpu/armv7/exynos/clock.c

@@ -921,6 +921,21 @@ static int exynos5_set_spi_clk(enum periph_id periph_id,
 	return 0;
 }
 
+static unsigned long exynos4_get_i2c_clk(void)
+{
+	struct exynos4_clock *clk =
+		(struct exynos4_clock *)samsung_get_base_clock();
+	unsigned long sclk, aclk_100;
+	unsigned int ratio;
+
+	sclk = get_pll_clk(APLL);
+
+	ratio = (readl(&clk->div_top)) >> 4;
+	ratio &= 0xf;
+	aclk_100 = sclk / (ratio + 1);
+	return aclk_100;
+}
+
 unsigned long get_pll_clk(int pllreg)
 {
 	if (cpu_is_exynos5())
@@ -941,6 +956,8 @@ unsigned long get_i2c_clk(void)
 {
 	if (cpu_is_exynos5()) {
 		return exynos5_get_i2c_clk();
+	} else if (cpu_is_exynos4()) {
+		return exynos4_get_i2c_clk();
 	} else {
 		debug("I2C clock is not set for this CPU\n");
 		return 0;

arch/arm/cpu/armv7/exynos/pinmux.c

@@ -329,54 +329,60 @@ static int exynos5_pinmux_config(int peripheral, int flags)
 	return 0;
 }
 
-static int exynos4_mmc_config(int peripheral, int flags)
+static void exynos4_i2c_config(int peripheral, int flags)
 {
-	struct exynos4_gpio_part2 *gpio2 =
-		(struct exynos4_gpio_part2 *)samsung_get_base_gpio_part2();
-	struct s5p_gpio_bank *bank, *bank_ext;
-	int i;
+	struct exynos4_gpio_part1 *gpio1 =
+		(struct exynos4_gpio_part1 *) samsung_get_base_gpio_part1();
 
 	switch (peripheral) {
-	case PERIPH_ID_SDMMC0:
-		bank = &gpio2->k0;
-		bank_ext = &gpio2->k1;
+	case PERIPH_ID_I2C0:
+		s5p_gpio_cfg_pin(&gpio1->d1, 0, GPIO_FUNC(0x2));
+		s5p_gpio_cfg_pin(&gpio1->d1, 1, GPIO_FUNC(0x2));
 		break;
-	case PERIPH_ID_SDMMC2:
-		bank = &gpio2->k2;
-		bank_ext = &gpio2->k3;
+	case PERIPH_ID_I2C1:
+		s5p_gpio_cfg_pin(&gpio1->d1, 2, GPIO_FUNC(0x2));
+		s5p_gpio_cfg_pin(&gpio1->d1, 3, GPIO_FUNC(0x2));
+		break;
+	case PERIPH_ID_I2C2:
+		s5p_gpio_cfg_pin(&gpio1->a0, 6, GPIO_FUNC(0x3));
+		s5p_gpio_cfg_pin(&gpio1->a0, 7, GPIO_FUNC(0x3));
+		break;
+	case PERIPH_ID_I2C3:
+		s5p_gpio_cfg_pin(&gpio1->a1, 2, GPIO_FUNC(0x3));
+		s5p_gpio_cfg_pin(&gpio1->a1, 3, GPIO_FUNC(0x3));
+		break;
+	case PERIPH_ID_I2C4:
+		s5p_gpio_cfg_pin(&gpio1->b, 2, GPIO_FUNC(0x3));
+		s5p_gpio_cfg_pin(&gpio1->b, 3, GPIO_FUNC(0x3));
+		break;
+	case PERIPH_ID_I2C5:
+		s5p_gpio_cfg_pin(&gpio1->b, 6, GPIO_FUNC(0x3));
+		s5p_gpio_cfg_pin(&gpio1->b, 7, GPIO_FUNC(0x3));
+		break;
+	case PERIPH_ID_I2C6:
+		s5p_gpio_cfg_pin(&gpio1->c1, 3, GPIO_FUNC(0x4));
+		s5p_gpio_cfg_pin(&gpio1->c1, 4, GPIO_FUNC(0x4));
+		break;
+	case PERIPH_ID_I2C7:
+		s5p_gpio_cfg_pin(&gpio1->d0, 2, GPIO_FUNC(0x3));
+		s5p_gpio_cfg_pin(&gpio1->d0, 3, GPIO_FUNC(0x3));
 		break;
-	default:
-		return -1;
-	}
-	for (i = 0; i < 7; i++) {
-		if (i == 2)
-			continue;
-		s5p_gpio_cfg_pin(bank, i,  GPIO_FUNC(0x2));
-		s5p_gpio_set_pull(bank, i, GPIO_PULL_NONE);
-		s5p_gpio_set_drv(bank, i, GPIO_DRV_4X);
-	}
-	if (flags & PINMUX_FLAG_8BIT_MODE) {
-		for (i = 3; i < 7; i++) {
-			s5p_gpio_cfg_pin(bank_ext, i,  GPIO_FUNC(0x3));
-			s5p_gpio_set_pull(bank_ext, i, GPIO_PULL_NONE);
-			s5p_gpio_set_drv(bank_ext, i, GPIO_DRV_4X);
-		}
 	}
-
-	return 0;
 }
 
 static int exynos4_pinmux_config(int peripheral, int flags)
 {
 	switch (peripheral) {
-	case PERIPH_ID_SDMMC0:
-	case PERIPH_ID_SDMMC2:
-		return exynos4_mmc_config(peripheral, flags);
-	case PERIPH_ID_SDMMC1:
-	case PERIPH_ID_SDMMC3:
-	case PERIPH_ID_SDMMC4:
-		printf("SDMMC device %d not implemented\n", peripheral);
-		return -1;
+	case PERIPH_ID_I2C0:
+	case PERIPH_ID_I2C1:
+	case PERIPH_ID_I2C2:
+	case PERIPH_ID_I2C3:
+	case PERIPH_ID_I2C4:
+	case PERIPH_ID_I2C5:
+	case PERIPH_ID_I2C6:
+	case PERIPH_ID_I2C7:
+		exynos4_i2c_config(peripheral, flags);
+		break;
 	default:
 		debug("%s: invalid peripheral %d", __func__, peripheral);
 		return -1;

arch/arm/cpu/armv7/omap3/Makefile

@@ -38,6 +38,7 @@ endif
 COBJS-$(CONFIG_DRIVER_TI_EMAC)	+= emac.o
 COBJS-$(CONFIG_EMIF4)	+= emif4.o
 COBJS-$(CONFIG_SDRC)	+= sdrc.o
+COBJS-$(CONFIG_USB_MUSB_AM35X)	+= am35x_musb.o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS) $(COBJS-y) $(SOBJS))

arch/arm/cpu/armv7/omap3/am35x_musb.c

@@ -0,0 +1,75 @@
+/*
+ * This file configures the internal USB PHY in AM35X.
+ *
+ * Copyright (C) 2012 Ilya Yanok <ilya.yanok@gmail.com>
+ *
+ * Based on omap_phy_internal.c code from Linux by
+ * Hema HK <hemahk@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc.
+ *
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/am35x_def.h>
+
+void am35x_musb_reset(void)
+{
+	/* Reset the musb interface */
+	clrsetbits_le32(&am35x_scm_general_regs->ip_sw_reset,
+			0, USBOTGSS_SW_RST);
+	clrsetbits_le32(&am35x_scm_general_regs->ip_sw_reset,
+			USBOTGSS_SW_RST, 0);
+}
+
+void am35x_musb_phy_power(u8 on)
+{
+	unsigned long start = get_timer(0);
+
+	if (on) {
+		/*
+		 * Start the on-chip PHY and its PLL.
+		 */
+		clrsetbits_le32(&am35x_scm_general_regs->devconf2,
+				CONF2_RESET | CONF2_PHYPWRDN | CONF2_OTGPWRDN,
+				CONF2_PHY_PLLON);
+
+		debug("Waiting for PHY clock good...\n");
+		while (!(readl(&am35x_scm_general_regs->devconf2)
+				& CONF2_PHYCLKGD)) {
+
+			if (get_timer(start) > CONFIG_SYS_HZ / 10) {
+				printf("musb PHY clock good timed out\n");
+				break;
+			}
+		}
+	} else {
+		/*
+		 * Power down the on-chip PHY.
+		 */
+		clrsetbits_le32(&am35x_scm_general_regs->devconf2,
+				CONF2_PHY_PLLON,
+				CONF2_PHYPWRDN | CONF2_OTGPWRDN);
+	}
+}
+
+void am35x_musb_clear_irq(void)
+{
+	clrsetbits_le32(&am35x_scm_general_regs->lvl_intr_clr,
+			0, USBOTGSS_INT_CLR);
+	readl(&am35x_scm_general_regs->lvl_intr_clr);
+}
+

arch/arm/include/asm/arch-am33xx/cpu.h

@@ -82,7 +82,8 @@ struct cm_wkuppll {
 	unsigned int clkseldpllcore;	/* offset 0x68 */
 	unsigned int resv9[1];
 	unsigned int idlestdpllper;	/* offset 0x70 */
-	unsigned int resv10[3];
+	unsigned int resv10[2];
+	unsigned int clkdcoldodpllper;	/* offset 0x7c */
 	unsigned int divm4dpllcore;	/* offset 0x80 */
 	unsigned int divm5dpllcore;	/* offset 0x84 */
 	unsigned int clkmoddpllmpu;	/* offset 0x88 */
@@ -275,12 +276,16 @@ struct ctrl_stat {
 /* Control Device Register */
 struct ctrl_dev {
 	unsigned int deviceid;		/* offset 0x00 */
-	unsigned int resv1[11];
+	unsigned int resv1[7];
+	unsigned int usb_ctrl0;		/* offset 0x20 */
+	unsigned int resv2;
+	unsigned int usb_ctrl1;		/* offset 0x28 */
+	unsigned int resv3;
 	unsigned int macid0l;		/* offset 0x30 */
 	unsigned int macid0h;		/* offset 0x34 */
 	unsigned int macid1l;		/* offset 0x38 */
 	unsigned int macid1h;		/* offset 0x3c */
-	unsigned int resv2[4];
+	unsigned int resv4[4];
 	unsigned int miisel;		/* offset 0x50 */
 };
 #endif /* __ASSEMBLY__ */

arch/arm/include/asm/arch-am33xx/hardware.h

@@ -87,4 +87,8 @@
 /* RTC base address */
 #define AM335X_RTC_BASE			0x44E3E000
 
+/* OTG */
+#define AM335X_USB0_OTG_BASE		0x47401000
+#define AM335X_USB1_OTG_BASE		0x47401800
+
 #endif /* __AM33XX_HARDWARE_H */

arch/arm/include/asm/arch-exynos/cpu.h

@@ -28,6 +28,8 @@
 #define EXYNOS4_ADDR_BASE		0x10000000
 
 /* EXYNOS4 */
+#define EXYNOS4_I2C_SPACING		0x10000
+
 #define EXYNOS4_GPIO_PART3_BASE		0x03860000
 #define EXYNOS4_PRO_ID			0x10000000
 #define EXYNOS4_SYSREG_BASE		0x10010000

arch/arm/include/asm/arch-exynos/dwmmc.h

@@ -0,0 +1,36 @@
+/*
+ * (C) Copyright 2012 SAMSUNG Electronics
+ * Jaehoon Chung <jh80.chung@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#define DWMCI_CLKSEL		0x09C
+#define DWMCI_SHIFT_0		0x0
+#define DWMCI_SHIFT_1		0x1
+#define DWMCI_SHIFT_2		0x2
+#define DWMCI_SHIFT_3		0x3
+#define DWMCI_SET_SAMPLE_CLK(x)	(x)
+#define DWMCI_SET_DRV_CLK(x)	((x) << 16)
+#define DWMCI_SET_DIV_RATIO(x)	((x) << 24)
+
+int exynos_dwmci_init(u32 regbase, int bus_width, int index);
+
+static inline unsigned int exynos_dwmmc_init(int index, int bus_width)
+{
+	unsigned int base = samsung_get_base_mmc() + (0x10000 * index);
+	return exynos_dwmci_init(base, bus_width, index);
+}

arch/arm/include/asm/arch-mxs/clock.h

@@ -35,6 +35,7 @@ enum mxc_clock {
 	MXC_SSP1_CLK,
 	MXC_SSP2_CLK,
 	MXC_SSP3_CLK,
+	MXC_XTAL_CLK,
 };
 
 enum mxs_ioclock {

arch/arm/include/asm/arch-mxs/imx-regs.h

@@ -26,7 +26,6 @@
 #include <asm/arch/regs-apbh.h>
 #include <asm/arch/regs-base.h>
 #include <asm/arch/regs-bch.h>
-#include <asm/arch/regs-clkctrl-mx28.h>
 #include <asm/arch/regs-digctl.h>
 #include <asm/arch/regs-gpmi.h>
 #include <asm/arch/regs-i2c.h>
@@ -34,9 +33,13 @@
 #include <asm/arch/regs-lradc.h>
 #include <asm/arch/regs-ocotp.h>
 #include <asm/arch/regs-pinctrl.h>
-#include <asm/arch/regs-power.h>
 #include <asm/arch/regs-rtc.h>
 #include <asm/arch/regs-ssp.h>
 #include <asm/arch/regs-timrot.h>
 
+#ifdef CONFIG_MX28
+#include <asm/arch/regs-clkctrl-mx28.h>
+#include <asm/arch/regs-power-mx28.h>
+#endif
+
 #endif	/* __IMX_REGS_H__ */

arch/arm/include/asm/arch-mxs/regs-clkctrl-mx28.h

@@ -31,9 +31,11 @@
 #ifndef	__ASSEMBLY__
 struct mxs_clkctrl_regs {
 	mxs_reg_32(hw_clkctrl_pll0ctrl0)	/* 0x00 */
-	mxs_reg_32(hw_clkctrl_pll0ctrl1)	/* 0x10 */
+	uint32_t	hw_clkctrl_pll0ctrl1;	/* 0x10 */
+	uint32_t	reserved_pll0ctrl1[3];	/* 0x14-0x1c */
 	mxs_reg_32(hw_clkctrl_pll1ctrl0)	/* 0x20 */
-	mxs_reg_32(hw_clkctrl_pll1ctrl1)	/* 0x30 */
+	uint32_t	hw_clkctrl_pll1ctrl1;	/* 0x30 */
+	uint32_t	reserved_pll1ctrl1[3];	/* 0x34-0x3c */
 	mxs_reg_32(hw_clkctrl_pll2ctrl0)	/* 0x40 */
 	mxs_reg_32(hw_clkctrl_cpu)		/* 0x50 */
 	mxs_reg_32(hw_clkctrl_hbus)		/* 0x60 */

arch/arm/include/asm/arch-omap3/am35x_def.h

@@ -32,9 +32,34 @@
 #ifndef __KERNEL_STRICT_NAMES
 #ifndef __ASSEMBLY__
 
+/* LVL_INTR_CLEAR bits */
+#define USBOTGSS_INT_CLR	(1 << 4)
+
 /* IP_SW_RESET bits */
+#define USBOTGSS_SW_RST		(1 << 0)	/* reset USBOTG */
 #define CPGMACSS_SW_RST		(1 << 1)	/* reset CPGMAC */
 
+/* DEVCONF2 bits */
+#define CONF2_PHY_GPIOMODE	(1 << 23)
+#define CONF2_OTGMODE		(3 << 14)
+#define CONF2_NO_OVERRIDE	(0 << 14)
+#define CONF2_FORCE_HOST	(1 << 14)
+#define CONF2_FORCE_DEVICE	(2 << 14)
+#define CONF2_FORCE_HOST_VBUS_LOW (3 << 14)
+#define CONF2_SESENDEN		(1 << 13)
+#define CONF2_VBDTCTEN		(1 << 12)
+#define CONF2_REFFREQ_24MHZ	(2 << 8)
+#define CONF2_REFFREQ_26MHZ	(7 << 8)
+#define CONF2_REFFREQ_13MHZ	(6 << 8)
+#define CONF2_REFFREQ		(0xf << 8)
+#define CONF2_PHYCLKGD		(1 << 7)
+#define CONF2_VBUSSENSE		(1 << 6)
+#define CONF2_PHY_PLLON		(1 << 5)
+#define CONF2_RESET		(1 << 4)
+#define CONF2_PHYPWRDN		(1 << 3)
+#define CONF2_OTGPWRDN		(1 << 2)
+#define CONF2_DATPOL		(1 << 1)
+
 /* General register mappings of system control module */
 #define AM35X_SCM_GEN_BASE	0x48002270
 struct am35x_scm_general {
@@ -49,6 +74,8 @@ struct am35x_scm_general {
 };
 #define am35x_scm_general_regs ((struct am35x_scm_general *)AM35X_SCM_GEN_BASE)
 
+#define AM35XX_IPSS_USBOTGSS_BASE	0x5C040000
+
 #endif /*__ASSEMBLY__ */
 #endif /* __KERNEL_STRICT_NAMES */
 

board/chromebook-x86/coreboot/coreboot_start16.S → arch/arm/include/asm/arch-omap3/musb.h

@@ -1,7 +1,6 @@
 /*
- * Copyright (c) 2011 The Chromium OS Authors.
- * (C) Copyright 2008
- * Graeme Russ, graeme.russ@gmail.com.
+ * (C) Copyright 2012
+ * Ilya Yanok, <ilya.yanok@gmail.com>
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -18,29 +17,12 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc.
  */
 
-/*
- * 16bit initialization code.
- * This code have to map the area of the boot flash
- * that is used by U-boot to its final destination.
- */
-
-.text
-.section .start16, "ax"
-.code16
-.globl board_init16
-board_init16:
-	jmp	board_init16_ret
-
-.section .bios, "ax"
-.code16
-.globl realmode_reset
-.hidden realmode_reset
-.type realmode_reset, @function
-realmode_reset:
-
-1:	hlt
-	jmp	1
+#ifndef __ASM_ARCH_OMAP3_MUSB_H
+#define __ASM_ARCH_OMAP3_MUSB_H
+extern void am35x_musb_reset(void);
+extern void am35x_musb_phy_power(u8 on);
+extern void am35x_musb_clear_irq(void);
+#endif

arch/arm/include/asm/imx-common/mx5_video.h

@@ -0,0 +1,21 @@
+/*
+ * Copyright (C) 2012
+ * Anatolij Gustschin, DENX Software Engineering, <agust@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+#ifndef __MX5_VIDEO_H
+#define __MX5_VIDEO_H
+
+#ifdef CONFIG_VIDEO
+void lcd_enable(void);
+void setup_iomux_lcd(void);
+#else
+static inline void lcd_enable(void) { }
+static inline void setup_iomux_lcd(void) { }
+#endif
+
+#endif

arch/arm/include/asm/omap_musb.h

@@ -0,0 +1,32 @@
+/*
+ * Board data structure for musb gadget on OMAPs
+ *
+ * Copyright (C) 2012, Ilya Yanok <ilya.yanok@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ASM_ARM_OMAP_MUSB_H
+#define __ASM_ARM_OMAP_MUSB_H
+
+extern struct musb_platform_ops musb_dsps_ops;
+extern const struct musb_platform_ops am35x_ops;
+extern const struct musb_platform_ops omap2430_ops;
+
+struct omap_musb_board_data {
+	u8 interface_type;
+	void (*set_phy_power)(u8 on);
+	void (*clear_irq)(void);
+	void (*reset)(void);
+};
+
+enum musb_interface    {MUSB_INTERFACE_ULPI, MUSB_INTERFACE_UTMI};
+#endif /* __ASM_ARM_OMAP_MUSB_H */

arch/arm/lib/board.c

@@ -224,6 +224,13 @@ int __arch_cpu_init(void)
 int arch_cpu_init(void)
 	__attribute__((weak, alias("__arch_cpu_init")));
 
+int __power_init_board(void)
+{
+	return 0;
+}
+int power_init_board(void)
+	__attribute__((weak, alias("__power_init_board")));
+
 init_fnc_t *init_sequence[] = {
 	arch_cpu_init,		/* basic arch cpu dependent setup */
 
@@ -525,6 +532,7 @@ void board_init_r(gd_t *id, ulong dest_addr)
 #ifdef CONFIG_ARCH_EARLY_INIT_R
 	arch_early_init_r();
 #endif
+	power_init_board();
 
 #if !defined(CONFIG_SYS_NO_FLASH)
 	puts("Flash: ");
@@ -532,15 +540,13 @@ void board_init_r(gd_t *id, ulong dest_addr)
 	flash_size = flash_init();
 	if (flash_size > 0) {
 # ifdef CONFIG_SYS_FLASH_CHECKSUM
-		char *s = getenv("flashchecksum");
-
 		print_size(flash_size, "");
 		/*
 		 * Compute and print flash CRC if flashchecksum is set to 'y'
 		 *
 		 * NOTE: Maybe we should add some WATCHDOG_RESET()? XXX
 		 */
-		if (s && (*s == 'y')) {
+		if (getenv_yesno("flashchecksum") == 1) {
 			printf("  CRC: %08X", crc32(0,
 				(const unsigned char *) CONFIG_SYS_FLASH_BASE,
 				flash_size));

arch/m68k/include/asm/string.h

@@ -16,7 +16,7 @@
 #endif
 
 extern int strcasecmp(const char *, const char *);
-extern int strncasecmp(const char *, const char *, int);
+extern int strncasecmp(const char *, const char *, __kernel_size_t);
 extern char * strcpy(char *,const char *);
 extern char * strncpy(char *,const char *, __kernel_size_t);
 extern __kernel_size_t strlen(const char *);

arch/m68k/lib/board.c

@@ -462,8 +462,7 @@ void board_init_r (gd_t *id, ulong dest_addr)
 		 *
 		 * NOTE: Maybe we should add some WATCHDOG_RESET()? XXX
 		 */
-		s = getenv ("flashchecksum");
-		if (s && (*s == 'y')) {
+		if (getenv_yesno("flashchecksum") == 1) {
 			printf ("  CRC: %08X",
 					crc32 (0,
 						   (const unsigned char *) CONFIG_SYS_FLASH_BASE,

arch/microblaze/lib/board.c

@@ -74,7 +74,6 @@ void board_init_f(ulong not_used)
 	gd = (gd_t *) (CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_GBL_DATA_OFFSET);
 	bd = (bd_t *) (CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_GBL_DATA_OFFSET \
 						- GENERATED_BD_INFO_SIZE);
-	__maybe_unused char *s;
 #if defined(CONFIG_CMD_FLASH)
 	ulong flash_size = 0;
 #endif
@@ -143,8 +142,7 @@ void board_init_f(ulong not_used)
 		 *
 		 * NOTE: Maybe we should add some WATCHDOG_RESET()? XXX
 		 */
-		s = getenv ("flashchecksum");
-		if (s && (*s == 'y')) {
+		if (getenv_yesno("flashchecksum") == 1) {
 			printf ("  CRC: %08X",
 				crc32(0, (const u8 *)bd->bi_flashstart,
 							flash_size)

arch/mips/cpu/mips32/au1x00/au1x00_usb_ohci.c

@@ -615,7 +615,7 @@ static ed_t * ep_add_ed (struct usb_device *usb_dev, unsigned long pipe)
 			| usb_pipeendpoint (pipe) << 7
 			| (usb_pipeisoc (pipe)? 0x8000: 0)
 			| (usb_pipecontrol (pipe)? 0: (usb_pipeout (pipe)? 0x800: 0x1000))
-			| usb_pipeslow (pipe) << 13
+			| (usb_dev->speed == USB_SPEED_LOW) << 13
 			| usb_maxpacket (usb_dev, pipe) << 16);
 
 	return ed_ret;

arch/mips/cpu/mips32/time.c

@@ -36,7 +36,6 @@ static unsigned long timestamp;
 int timer_init(void)
 {
 	/* Set up the timer for the first expiration. */
-	timestamp = 0;
 	write_c0_compare(read_c0_count() + CYCLES_PER_JIFFY);
 
 	return 0;

arch/mips/cpu/mips64/start.S

@@ -108,7 +108,12 @@ reset:
 	mtc0	t0, CP0_CONFIG
 #endif
 
-	/* Initialize $gp */
+	/*
+	 * Initialize $gp, force 8 byte alignment of bal instruction to forbid
+	 * the compiler to put nop's between bal and _gp. This is required to
+	 * keep _gp and ra aligned to 8 byte.
+	 */
+	.align	3
 	bal	1f
 	 nop
 	.dword	_gp

arch/mips/cpu/mips64/time.c

@@ -37,7 +37,6 @@ static unsigned long timestamp;
 int timer_init(void)
 {
 	/* Set up the timer for the first expiration. */
-	timestamp = 0;
 	write_c0_compare(read_c0_count() + CYCLES_PER_JIFFY);
 
 	return 0;

arch/mips/include/asm/bitops.h

@@ -566,7 +566,7 @@ static __inline__ int __test_and_change_bit(int nr, volatile void * addr)
  * @nr: bit number to test
  * @addr: Address to start counting from
  */
-static __inline__ int test_bit(int nr, volatile void *addr)
+static __inline__ int test_bit(int nr, const volatile void *addr)
 {
 	return ((1UL << (nr & 31)) & (((const unsigned int *) addr)[nr >> 5])) != 0;
 }

arch/mips/lib/board.c

@@ -24,6 +24,7 @@
 #include <common.h>
 #include <command.h>
 #include <malloc.h>
+#include <serial.h>
 #include <stdio_dev.h>
 #include <version.h>
 #include <net.h>
@@ -46,7 +47,7 @@ static char *failed = "*** failed ***\n";
  * mips_io_port_base is the begin of the address space to which x86 style
  * I/O ports are mapped.
  */
-unsigned long mips_io_port_base = -1;
+const unsigned long mips_io_port_base = -1;
 
 int __board_early_init_f(void)
 {
@@ -262,6 +263,8 @@ void board_init_r(gd_t *id, ulong dest_addr)
 
 	monitor_flash_len = (ulong)&uboot_end_data - dest_addr;
 
+	serial_initialize();
+
 #if defined(CONFIG_NEEDS_MANUAL_RELOC)
 	/*
 	 * We have to relocate the command table manually

arch/powerpc/config.mk

@@ -42,3 +42,8 @@ endif
 ifeq ($(CROSS_COMPILE),powerpc-openbsd-)
 PLATFORM_CPPFLAGS+= -D__PPC__
 endif
+
+# Only test once
+ifneq ($(CONFIG_SPL_BUILD),y)
+ALL-y += checkgcc4
+endif

arch/powerpc/cpu/mpc5xxx/Makefile

@@ -41,6 +41,10 @@ COBJS-y += speed.o
 COBJS-$(CONFIG_CMD_USB) += usb_ohci.o
 COBJS-$(CONFIG_CMD_USB) += usb.o
 
+ifdef CONFIG_SPL_BUILD
+COBJS-y += spl_boot.o
+endif
+
 SRCS	:= $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
 OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS-y))
 START	:= $(addprefix $(obj),$(SSTART) $(CSTART))

arch/powerpc/cpu/mpc5xxx/spl_boot.c

@@ -0,0 +1,79 @@
+/*
+ * Copyright (C) 2012 Stefan Roese <sr@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ */
+
+#include <common.h>
+#include <spl.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * Needed to align size SPL image to a 4-byte length
+ */
+u32 end_align __attribute__ ((section(".end_align")));
+
+/*
+ * Return selected boot device. On MPC5200 its only NOR flash right now.
+ */
+u32 spl_boot_device(void)
+{
+	return BOOT_DEVICE_NOR;
+}
+
+/*
+ * SPL version of board_init_f()
+ */
+void board_init_f(ulong bootflag)
+{
+	end_align = (u32)__spl_flash_end;
+
+	/*
+	 * First we need to initialize the SDRAM, so that the real
+	 * U-Boot or the OS (Linux) can be loaded
+	 */
+	initdram(0);
+
+	/* Clear bss */
+	memset(__bss_start, '\0', __bss_end__ - __bss_start);
+
+	/*
+	 * Init global_data pointer. Has to be done before calling
+	 * get_clocks(), as it stores some clock values into gd needed
+	 * later on in the serial driver.
+	 */
+	/* Pointer is writable since we allocated a register for it */
+	gd = (gd_t *)(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET);
+	/* Clear initial global data */
+	memset((void *)gd, 0, sizeof(gd_t));
+
+	/*
+	 * get_clocks() needs to be called so that the serial driver
+	 * works correctly
+	 */
+	get_clocks();
+
+	/*
+	 * Do rudimental console / serial setup
+	 */
+	preloader_console_init();
+
+	/*
+	 * Call board_init_r() (SPL framework version) to load and boot
+	 * real U-Boot or OS
+	 */
+	board_init_r(NULL, 0);
+	/* Does not return!!! */
+}

arch/powerpc/cpu/mpc5xxx/start.S

@@ -50,6 +50,7 @@
 #define MSR_KERNEL (MSR_FP|MSR_ME|MSR_RI)
 #endif
 
+#ifndef CONFIG_SPL_BUILD
 /*
  * Set up GOT: Global Offset Table
  *
@@ -68,6 +69,7 @@
 	GOT_ENTRY(__bss_end__)
 	GOT_ENTRY(__bss_start)
 	END_GOT
+#endif
 
 /*
  * Version string
@@ -84,6 +86,18 @@ version_string:
 	. = EXC_OFF_SYS_RESET
 	.globl	_start
 _start:
+
+#if defined(CONFIG_SPL) && !defined(CONFIG_SPL_BUILD)
+	/*
+	 * This is the entry of the real U-Boot from a board port
+	 * that supports SPL booting on the MPC5200. We only need
+	 * to call board_init_f() here. Everything else has already
+	 * been done in the SPL u-boot version.
+	 */
+	GET_GOT			/* initialize GOT access		*/
+	bl	board_init_f	/* run 1st part of board init code (in Flash)*/
+	/* NOTREACHED - board_init_f() does not return */
+#else
 	mfmsr	r5			/* save msr contents		*/
 
 	/* Move CSBoot and adjust instruction pointer                   */
@@ -152,7 +166,9 @@ lowboot_reentry:
 	/* Be careful to keep code relocatable !			*/
 	/*--------------------------------------------------------------*/
 
+#ifndef CONFIG_SPL_BUILD
 	GET_GOT			/* initialize GOT access		*/
+#endif
 
 	/* r3: IMMR */
 	bl	cpu_init_f	/* run low-level CPU init code (in Flash)*/
@@ -160,7 +176,9 @@ lowboot_reentry:
 	bl	board_init_f	/* run 1st part of board init code (in Flash)*/
 
 	/* NOTREACHED - board_init_f() does not return */
+#endif
 
+#ifndef CONFIG_SPL_BUILD
 /*
  * Vector Table
  */
@@ -333,6 +351,7 @@ int_return:
 	lwz	r1,GPR1(r1)
 	SYNC
 	rfi
+#endif /* CONFIG_SPL_BUILD */
 
 /*
  * This code initialises the MPC5xxx processor core
@@ -522,6 +541,7 @@ get_pvr:
 	mfspr	r3, PVR
 	blr
 
+#ifndef CONFIG_SPL_BUILD
 /*------------------------------------------------------------------------------*/
 
 /*
@@ -759,3 +779,5 @@ trap_init:
 
 	mtlr	r4			/* restore link register    */
 	blr
+
+#endif /* CONFIG_SPL_BUILD */

nand_spl/board/freescale/common.c → arch/powerpc/cpu/mpc5xxx/u-boot-spl.lds

@@ -1,6 +1,5 @@
 /*
- * Copyright 2012 Freescale Semiconductor, Inc.
- * Author: Matthew McClintock <msm@freescale.com>
+ * Copyright 2012 Stefan Roese <sr@denx.de>
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
@@ -10,31 +9,49 @@
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- *
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  * MA 02111-1307 USA
- *
  */
 
-#include <common.h>
-#include <asm/processor.h>
-#include <asm/global_data.h>
+MEMORY
+{
+	sdram : ORIGIN = CONFIG_SPL_BSS_START_ADDR,
+		LENGTH = CONFIG_SPL_BSS_MAX_SIZE
+	flash : ORIGIN = CONFIG_SPL_TEXT_BASE,
+		LENGTH = CONFIG_SYS_SPL_MAX_LEN
+}
 
-DECLARE_GLOBAL_DATA_PTR;
+OUTPUT_ARCH(powerpc)
+ENTRY(_start)
+SECTIONS
+{
+	.text :
+	{
+		__start = .;
+		arch/powerpc/cpu/mpc5xxx/start.o	(.text)
+		*(.text*)
+	} > flash
 
-#ifndef CONFIG_SYS_FSL_TBCLK_DIV
-#define CONFIG_SYS_FSL_TBCLK_DIV 8
-#endif
+	. = ALIGN(4);
+	.data : { *(SORT_BY_ALIGNMENT(.data*)) } > flash
 
-void udelay(unsigned long usec)
-{
-	u32 ticks_per_usec = gd->bus_clk / (CONFIG_SYS_FSL_TBCLK_DIV * 1000000);
-	u32 ticks = ticks_per_usec * usec;
-	u32 s = mfspr(SPRN_TBRL);
+	. = ALIGN(4);
+	.rodata : { *(SORT_BY_ALIGNMENT(.rodata*)) } > flash
+
+	. = ALIGN(4);
+	.end_align : { *(.end_align*) } > flash
+	__spl_flash_end = .;
 
-	while ((mfspr(SPRN_TBRL) - s) < ticks);
+	.bss :
+	{
+		. = ALIGN(4);
+		__bss_start = .;
+		*(.bss*)
+		. = ALIGN(4);
+		__bss_end__ = .;
+	} > sdram
 }

arch/powerpc/cpu/mpc5xxx/usb_ohci.c

@@ -618,7 +618,7 @@ static ed_t * ep_add_ed (struct usb_device *usb_dev, unsigned long pipe)
 			| usb_pipeendpoint (pipe) << 7
 			| (usb_pipeisoc (pipe)? 0x8000: 0)
 			| (usb_pipecontrol (pipe)? 0: (usb_pipeout (pipe)? 0x800: 0x1000))
-			| usb_pipeslow (pipe) << 13
+			| (usb_dev->speed == USB_SPEED_LOW) << 13
 			| usb_maxpacket (usb_dev, pipe) << 16);
 
 	return ed_ret;

arch/powerpc/cpu/mpc85xx/Makefile

@@ -28,7 +28,22 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(CPU).o
 
-START	= start.o resetvec.o
+MINIMAL=
+
+ifdef CONFIG_SPL_BUILD
+ifdef CONFIG_SPL_INIT_MINIMAL
+MINIMAL=y
+endif
+endif
+
+START = start.o resetvec.o
+
+ifdef MINIMAL
+
+COBJS-y	+= cpu_init_early.o tlb.o spl_minimal.o
+
+else
+
 SOBJS-$(CONFIG_MP)	+= release.o
 SOBJS	= $(SOBJS-y)
 
@@ -121,17 +136,20 @@ COBJS-$(CONFIG_PPC_P5040) += p5040_serdes.o
 COBJS-$(CONFIG_PPC_T4240) += t4240_serdes.o
 COBJS-$(CONFIG_PPC_B4860) += b4860_serdes.o
 
-COBJS	= $(COBJS-y)
-COBJS	+= cpu.o
-COBJS	+= cpu_init.o
-COBJS	+= cpu_init_early.o
-COBJS	+= interrupts.o
-COBJS	+= speed.o
-COBJS	+= tlb.o
-COBJS	+= traps.o
+COBJS-y	+= cpu.o
+COBJS-y	+= cpu_init.o
+COBJS-y	+= cpu_init_early.o
+COBJS-y	+= interrupts.o
+COBJS-y	+= speed.o
+COBJS-y	+= tlb.o
+COBJS-y	+= traps.o
 
 # Stub implementations of cache management functions for USB
-COBJS += cache.o
+COBJS-y += cache.o
+
+endif # not minimal
+
+COBJS	= $(COBJS-y)
 
 SRCS	:= $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))

arch/powerpc/cpu/mpc85xx/cmd_errata.c

@@ -24,6 +24,109 @@
 #include <command.h>
 #include <linux/compiler.h>
 #include <asm/processor.h>
+#include "fsl_corenet_serdes.h"
+
+#ifdef CONFIG_SYS_FSL_ERRATUM_A004849
+/*
+ * This work-around is implemented in PBI, so just check to see if the
+ * work-around was actually applied.  To do this, we check for specific data
+ * at specific addresses in DCSR.
+ *
+ * Array offsets[] contains a list of offsets within DCSR.  According to the
+ * erratum document, the value at each offset should be 2.
+ */
+static void check_erratum_a4849(uint32_t svr)
+{
+	void __iomem *dcsr = (void *)CONFIG_SYS_DCSRBAR + 0xb0000;
+	unsigned int i;
+
+#if defined(CONFIG_PPC_P2041) || defined(CONFIG_PPC_P3041)
+	static const uint8_t offsets[] = {
+		0x50, 0x54, 0x58, 0x90, 0x94, 0x98
+	};
+#endif
+#ifdef CONFIG_PPC_P4080
+	static const uint8_t offsets[] = {
+		0x60, 0x64, 0x68, 0x6c, 0xa0, 0xa4, 0xa8, 0xac
+	};
+#endif
+	uint32_t x108; /* The value that should be at offset 0x108 */
+
+	for (i = 0; i < ARRAY_SIZE(offsets); i++) {
+		if (in_be32(dcsr + offsets[i]) != 2) {
+			printf("Work-around for Erratum A004849 is not enabled\n");
+			return;
+		}
+	}
+
+#if defined(CONFIG_PPC_P2041) || defined(CONFIG_PPC_P3041)
+	x108 = 0x12;
+#endif
+
+#ifdef CONFIG_PPC_P4080
+	/*
+	 * For P4080, the erratum document says that the value at offset 0x108
+	 * should be 0x12 on rev2, or 0x1c on rev3.
+	 */
+	if (SVR_MAJ(svr) == 2)
+		x108 = 0x12;
+	if (SVR_MAJ(svr) == 3)
+		x108 = 0x1c;
+#endif
+
+	if (in_be32(dcsr + 0x108) != x108) {
+		printf("Work-around for Erratum A004849 is not enabled\n");
+		return;
+	}
+
+	/* Everything matches, so the erratum work-around was applied */
+
+	printf("Work-around for Erratum A004849 enabled\n");
+}
+#endif
+
+#ifdef CONFIG_SYS_FSL_ERRATUM_A004580
+/*
+ * This work-around is implemented in PBI, so just check to see if the
+ * work-around was actually applied.  To do this, we check for specific data
+ * at specific addresses in the SerDes register block.
+ *
+ * The work-around says that for each SerDes lane, write BnTTLCRy0 =
+ * 0x1B00_0001, Register 2 = 0x0088_0000, and Register 3 = 0x4000_0000.
+
+ */
+static void check_erratum_a4580(uint32_t svr)
+{
+	const serdes_corenet_t __iomem *srds_regs =
+		(void *)CONFIG_SYS_FSL_CORENET_SERDES_ADDR;
+	unsigned int lane;
+
+	for (lane = 0; lane < SRDS_MAX_LANES; lane++) {
+		if (serdes_lane_enabled(lane)) {
+			const struct serdes_lane __iomem *srds_lane =
+				&srds_regs->lane[serdes_get_lane_idx(lane)];
+
+			/*
+			 * Verify that the values we were supposed to write in
+			 * the PBI are actually there.  Also, the lower 15
+			 * bits of res4[3] should be the same as the upper 15
+			 * bits of res4[1].
+			 */
+			if ((in_be32(&srds_lane->ttlcr0) != 0x1b000001) ||
+			    (in_be32(&srds_lane->res4[1]) != 0x880000) ||
+			    (in_be32(&srds_lane->res4[3]) != 0x40000044)) {
+				printf("Work-around for Erratum A004580 is "
+				       "not enabled\n");
+				return;
+			}
+		}
+	}
+
+	/* Everything matches, so the erratum work-around was applied */
+
+	printf("Work-around for Erratum A004580 enabled\n");
+}
+#endif
 
 static int do_errata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
@@ -136,6 +239,17 @@ static int do_errata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 #endif
 #ifdef CONFIG_SYS_FSL_ERRATUM_A_004934
 	puts("Work-around for Erratum A004934 enabled\n");
+#endif
+#ifdef CONFIG_SYS_FSL_ERRATUM_A004849
+	/* This work-around is implemented in PBI, so just check for it */
+	check_erratum_a4849(svr);
+#endif
+#ifdef CONFIG_SYS_FSL_ERRATUM_A004580
+	/* This work-around is implemented in PBI, so just check for it */
+	check_erratum_a4580(svr);
+#endif
+#ifdef CONFIG_SYS_P4080_ERRATUM_PCIE_A003
+	puts("Work-around for Erratum PCIe-A003 enabled\n");
 #endif
 	return 0;
 }

arch/powerpc/cpu/mpc85xx/cpu.c

@@ -332,7 +332,8 @@ void mpc85xx_reginfo(void)
 
 /* Common ddr init for non-corenet fsl 85xx platforms */
 #ifndef CONFIG_FSL_CORENET
-#if defined(CONFIG_SYS_RAMBOOT) && !defined(CONFIG_SYS_INIT_L2_ADDR)
+#if (defined(CONFIG_SYS_RAMBOOT) || defined(CONFIG_SPL)) && \
+	!defined(CONFIG_SYS_INIT_L2_ADDR)
 phys_size_t initdram(int board_type)
 {
 #if defined(CONFIG_SPD_EEPROM) || defined(CONFIG_DDR_SPD)
@@ -450,21 +451,21 @@ static void dump_spd_ddr_reg(void)
 	for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
 		switch (i) {
 		case 0:
-			ddr[i] = (void *)CONFIG_SYS_MPC85xx_DDR_ADDR;
+			ddr[i] = (void *)CONFIG_SYS_MPC8xxx_DDR_ADDR;
 			break;
-#if defined(CONFIG_SYS_MPC85xx_DDR2_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 1)
+#if defined(CONFIG_SYS_MPC8xxx_DDR2_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 1)
 		case 1:
-			ddr[i] = (void *)CONFIG_SYS_MPC85xx_DDR2_ADDR;
+			ddr[i] = (void *)CONFIG_SYS_MPC8xxx_DDR2_ADDR;
 			break;
 #endif
-#if defined(CONFIG_SYS_MPC85xx_DDR3_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 2)
+#if defined(CONFIG_SYS_MPC8xxx_DDR3_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 2)
 		case 2:
-			ddr[i] = (void *)CONFIG_SYS_MPC85xx_DDR3_ADDR;
+			ddr[i] = (void *)CONFIG_SYS_MPC8xxx_DDR3_ADDR;
 			break;
 #endif
-#if defined(CONFIG_SYS_MPC85xx_DDR4_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 3)
+#if defined(CONFIG_SYS_MPC8xxx_DDR4_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 3)
 		case 3:
-			ddr[i] = (void *)CONFIG_SYS_MPC85xx_DDR4_ADDR;
+			ddr[i] = (void *)CONFIG_SYS_MPC8xxx_DDR4_ADDR;
 			break;
 #endif
 		default:

arch/powerpc/cpu/mpc85xx/cpu_init.c

@@ -350,6 +350,10 @@ int cpu_init_r(void)
 #elif defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2)
 	struct ccsr_cluster_l2 * l2cache = (void __iomem *)CONFIG_SYS_FSL_CLUSTER_1_L2;
 #endif
+#if defined(CONFIG_PPC_SPINTABLE_COMPATIBLE) && defined(CONFIG_MP)
+	extern int spin_table_compat;
+	const char *spin;
+#endif
 
 #if defined(CONFIG_SYS_P4080_ERRATUM_CPU22) || \
 	defined(CONFIG_SYS_FSL_ERRATUM_NMG_CPU_A011)
@@ -395,6 +399,14 @@ int cpu_init_r(void)
 	}
 #endif
 
+#if defined(CONFIG_PPC_SPINTABLE_COMPATIBLE) && defined(CONFIG_MP)
+	spin = getenv("spin_table_compat");
+	if (spin && (*spin == 'n'))
+		spin_table_compat = 0;
+	else
+		spin_table_compat = 1;
+#endif
+
 	puts ("L2:    ");
 
 #if defined(CONFIG_L2_CACHE)
@@ -470,7 +482,7 @@ int cpu_init_r(void)
 				&& l2srbar >= CONFIG_SYS_FLASH_BASE) {
 			l2srbar = CONFIG_SYS_INIT_L2_ADDR;
 			l2cache->l2srbar0 = l2srbar;
-			printf("moving to 0x%08x", CONFIG_SYS_INIT_L2_ADDR);
+			printf(", moving to 0x%08x", CONFIG_SYS_INIT_L2_ADDR);
 		}
 #endif /* CONFIG_SYS_INIT_L2_ADDR */
 		puts("\n");

arch/powerpc/cpu/mpc85xx/ddr-gen1.c

@@ -18,7 +18,7 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
 			     unsigned int ctrl_num)
 {
 	unsigned int i;
-	volatile ccsr_ddr_t *ddr = (void *)CONFIG_SYS_MPC85xx_DDR_ADDR;
+	volatile ccsr_ddr_t *ddr = (void *)CONFIG_SYS_MPC8xxx_DDR_ADDR;
 
 	if (ctrl_num != 0) {
 		printf("%s unexpected ctrl_num = %u\n", __FUNCTION__, ctrl_num);
@@ -73,7 +73,7 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
 void
 ddr_enable_ecc(unsigned int dram_size)
 {
-	volatile ccsr_ddr_t *ddr= (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR);
+	volatile ccsr_ddr_t *ddr= (void *)(CONFIG_SYS_MPC8xxx_DDR_ADDR);
 
 	dma_meminit(CONFIG_MEM_INIT_VALUE, dram_size);
 

arch/powerpc/cpu/mpc85xx/ddr-gen2.c

@@ -19,14 +19,11 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
 			     unsigned int ctrl_num)
 {
 	unsigned int i;
-#ifdef CONFIG_MPC83xx
-	ccsr_ddr_t *ddr = (void *)CONFIG_SYS_MPC83xx_DDR_ADDR;
-#else
-	ccsr_ddr_t *ddr = (void *)CONFIG_SYS_MPC85xx_DDR_ADDR;
-#ifdef CONFIG_SYS_FSL_ERRATUM_NMG_DDR120
+	ccsr_ddr_t *ddr = (void *)CONFIG_SYS_MPC8xxx_DDR_ADDR;
+
+#if defined(CONFIG_SYS_FSL_ERRATUM_NMG_DDR120) && defined(CONFIG_MPC85xx)
 	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
 	uint svr;
-#endif
 #endif
 
 	if (ctrl_num) {

arch/powerpc/cpu/mpc85xx/ddr-gen3.c

@@ -32,21 +32,21 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
 
 	switch (ctrl_num) {
 	case 0:
-		ddr = (void *)CONFIG_SYS_MPC85xx_DDR_ADDR;
+		ddr = (void *)CONFIG_SYS_MPC8xxx_DDR_ADDR;
 		break;
-#if defined(CONFIG_SYS_MPC85xx_DDR2_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 1)
+#if defined(CONFIG_SYS_MPC8xxx_DDR2_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 1)
 	case 1:
-		ddr = (void *)CONFIG_SYS_MPC85xx_DDR2_ADDR;
+		ddr = (void *)CONFIG_SYS_MPC8xxx_DDR2_ADDR;
 		break;
 #endif
-#if defined(CONFIG_SYS_MPC85xx_DDR3_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 2)
+#if defined(CONFIG_SYS_MPC8xxx_DDR3_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 2)
 	case 2:
-		ddr = (void *)CONFIG_SYS_MPC85xx_DDR3_ADDR;
+		ddr = (void *)CONFIG_SYS_MPC8xxx_DDR3_ADDR;
 		break;
 #endif
-#if defined(CONFIG_SYS_MPC85xx_DDR4_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 3)
+#if defined(CONFIG_SYS_MPC8xxx_DDR4_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 3)
 	case 3:
-		ddr = (void *)CONFIG_SYS_MPC85xx_DDR4_ADDR;
+		ddr = (void *)CONFIG_SYS_MPC8xxx_DDR4_ADDR;
 		break;
 #endif
 	default:

arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c

@@ -714,9 +714,13 @@ void fsl_serdes_init(void)
 
 #ifdef CONFIG_SYS_P4080_ERRATUM_SERDES9
 		/*
-		 * Set BnTTLCRy0[FLT_SEL] = 000011 and set BnTTLCRy0[17] = 1 for
-		 * each of the SerDes lanes selected as SGMII, XAUI, SRIO, or
-		 * AURORA before the device is initialized.
+		 * Set BnTTLCRy0[FLT_SEL] = 011011 and set BnTTLCRy0[31] = 1
+		 * for each of the SerDes lanes selected as SGMII, XAUI, SRIO,
+		 * or AURORA before the device is initialized.
+		 *
+		 * Note that this part of the SERDES-9 work-around is
+		 * redundant if the work-around for A-4580 has already been
+		 * applied via PBI.
 		 */
 		switch (lane_prtcl) {
 		case SGMII_FM1_DTSEC1:
@@ -733,10 +737,12 @@ void fsl_serdes_init(void)
 		case SRIO1:
 		case SRIO2:
 		case AURORA:
-			clrsetbits_be32(&srds_regs->lane[idx].ttlcr0,
-					SRDS_TTLCR0_FLT_SEL_MASK,
-					SRDS_TTLCR0_FLT_SEL_750PPM |
-					SRDS_TTLCR0_PM_DIS);
+			out_be32(&srds_regs->lane[idx].ttlcr0,
+				 SRDS_TTLCR0_FLT_SEL_KFR_26 |
+				 SRDS_TTLCR0_FLT_SEL_KPH_28 |
+				 SRDS_TTLCR0_FLT_SEL_750PPM |
+				 SRDS_TTLCR0_FREQOVD_EN);
+			break;
 		default:
 			break;
 		}

arch/powerpc/cpu/mpc85xx/mp.c

@@ -46,10 +46,8 @@ u32 get_my_id()
  */
 int hold_cores_in_reset(int verbose)
 {
-	const char *s = getenv("mp_holdoff");
-
 	/* Default to no, overriden by 'y', 'yes', 'Y', 'Yes', or '1' */
-	if (s && (*s == 'y' || *s == 'Y' || *s == '1')) {
+	if (getenv_yesno("mp_holdoff") == 1) {
 		if (verbose) {
 			puts("Secondary cores are being held in reset.\n");
 			puts("See 'mp_holdoff' environment variable\n");

arch/powerpc/cpu/mpc85xx/release.S

@@ -351,7 +351,13 @@ __secondary_reset_vector:
 	.align L1_CACHE_SHIFT
 	.global __second_half_boot_page
 __second_half_boot_page:
-#define EPAPR_MAGIC		0x45504150
+#ifdef CONFIG_PPC_SPINTABLE_COMPATIBLE
+	lis	r3,(spin_table_compat - __second_half_boot_page)@h
+	ori	r3,r3,(spin_table_compat - __second_half_boot_page)@l
+	add	r3,r3,r11 /* r11 has the address of __second_half_boot_page */
+	lwz	r14,0(r3)
+#endif
+
 #define ENTRY_ADDR_UPPER	0
 #define ENTRY_ADDR_LOWER	4
 #define ENTRY_R3_UPPER		8
@@ -383,7 +389,24 @@ __second_half_boot_page:
 	stw	r8,ENTRY_ADDR_LOWER(r10)
 
 	/* spin waiting for addr */
-3:	lwz	r4,ENTRY_ADDR_LOWER(r10)
+3:
+/*
+ * To comply with ePAPR 1.1, the spin table has been moved to cache-enabled
+ * memory. Old OS may not work with this change. A patch is waiting to be
+ * accepted for Linux kernel. Other OS needs similar fix to spin table.
+ * For OSes with old spin table code, we can enable this temporary fix by
+ * setting environmental variable "spin_table_compat". For new OSes, set
+ * "spin_table_compat=no". After Linux is fixed, we can remove this macro
+ * and related code. For now, it is enabled by default.
+ */
+#ifdef CONFIG_PPC_SPINTABLE_COMPATIBLE
+	cmpwi   r14,0
+	beq     4f
+	dcbf    0, r10
+	sync
+4:
+#endif
+	lwz	r4,ENTRY_ADDR_LOWER(r10)
 	andi.	r11,r4,1
 	bne	3b
 	isync
@@ -460,5 +483,14 @@ __second_half_boot_page:
 	.globl __spin_table
 __spin_table:
 	.space CONFIG_MAX_CPUS*ENTRY_SIZE
+
+#ifdef CONFIG_PPC_SPINTABLE_COMPATIBLE
+	.align L1_CACHE_SHIFT
+	.global spin_table_compat
+spin_table_compat:
+	.long	1
+
+#endif
+
 __spin_table_end:
 	.space 4096 - (__spin_table_end - __spin_table)

arch/powerpc/cpu/mpc85xx/cpu_init_nand.c → arch/powerpc/cpu/mpc85xx/spl_minimal.c

@@ -21,12 +21,16 @@
  */
 
 #include <common.h>
+#include <asm/processor.h>
+#include <asm/global_data.h>
 #include <asm/fsl_ifc.h>
 #include <asm/io.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 void cpu_init_f(void)
 {
-#if defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SYS_INIT_L2_ADDR)
+#ifdef CONFIG_SYS_INIT_L2_ADDR
 	ccsr_l2cache_t *l2cache = (void *)CONFIG_SYS_MPC85xx_L2_ADDR;
 
 	out_be32(&l2cache->l2srbar0, CONFIG_SYS_INIT_L2_ADDR);
@@ -40,3 +44,16 @@ void cpu_init_f(void)
 		(MPC85xx_L2CTL_L2E | MPC85xx_L2CTL_L2SRAM_ENTIRE));
 #endif
 }
+
+#ifndef CONFIG_SYS_FSL_TBCLK_DIV
+#define CONFIG_SYS_FSL_TBCLK_DIV 8
+#endif
+
+void udelay(unsigned long usec)
+{
+	u32 ticks_per_usec = gd->bus_clk / (CONFIG_SYS_FSL_TBCLK_DIV * 1000000);
+	u32 ticks = ticks_per_usec * usec;
+	u32 s = mfspr(SPRN_TBRL);
+
+	while ((mfspr(SPRN_TBRL) - s) < ticks);
+}

arch/powerpc/cpu/mpc85xx/start.S

@@ -44,6 +44,15 @@
 #undef	MSR_KERNEL
 #define MSR_KERNEL ( MSR_ME )	/* Machine Check */
 
+#if defined(CONFIG_NAND_SPL) || \
+	(defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_INIT_MINIMAL))
+#define MINIMAL_SPL
+#endif
+
+#if !defined(CONFIG_SPL) && !defined(CONFIG_SYS_RAMBOOT) && !defined(CONFIG_SECURE_BOOT)
+#define NOR_BOOT
+#endif
+
 /*
  * Set up GOT: Global Offset Table
  *
@@ -53,7 +62,7 @@
 	GOT_ENTRY(_GOT2_TABLE_)
 	GOT_ENTRY(_FIXUP_TABLE_)
 
-#ifndef CONFIG_NAND_SPL
+#ifndef MINIMAL_SPL
 	GOT_ENTRY(_start)
 	GOT_ENTRY(_start_of_vectors)
 	GOT_ENTRY(_end_of_vectors)
@@ -282,51 +291,8 @@ l2_disabled:
 	isync
 	.endm
 
-#if defined(CONFIG_SYS_PPC_E500_DEBUG_TLB) && !defined(CONFIG_NAND_SPL)
-/*
- * TLB entry for debuggging in AS1
- * Create temporary TLB entry in AS0 to handle debug exception
- * As on debug exception MSR is cleared i.e. Address space is changed
- * to 0. A TLB entry (in AS0) is required to handle debug exception generated
- * in AS1.
- */
-
-#if !defined(CONFIG_SYS_RAMBOOT) && !defined(CONFIG_SECURE_BOOT)
-/*
- * TLB entry is created for IVPR + IVOR15 to map on valid OP code address
- * bacause flash's virtual address maps to 0xff800000 - 0xffffffff.
- * and this window is outside of 4K boot window.
- */
-	create_tlb1_entry CONFIG_SYS_PPC_E500_DEBUG_TLB, \
-		0, BOOKE_PAGESZ_4M, \
-		CONFIG_SYS_MONITOR_BASE & 0xffc00000,  MAS2_I|MAS2_G, \
-		0xffc00000, MAS3_SX|MAS3_SW|MAS3_SR, \
-		0, r6
-
-#elif !defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SECURE_BOOT)
-	create_tlb1_entry CONFIG_SYS_PPC_E500_DEBUG_TLB, \
-		0, BOOKE_PAGESZ_1M, \
-		CONFIG_SYS_MONITOR_BASE, MAS2_I|MAS2_G, \
-		CONFIG_SYS_PBI_FLASH_WINDOW, MAS3_SX|MAS3_SW|MAS3_SR, \
-		0, r6
-#else
-/*
- * TLB entry is created for IVPR + IVOR15 to map on valid OP code address
- * because "nexti" will resize TLB to 4K
- */
-	create_tlb1_entry CONFIG_SYS_PPC_E500_DEBUG_TLB, \
-		0, BOOKE_PAGESZ_256K, \
-		CONFIG_SYS_MONITOR_BASE, MAS2_I, \
-		CONFIG_SYS_MONITOR_BASE, MAS3_SX|MAS3_SW|MAS3_SR, \
-		0, r6
-#endif
-#endif
-
-/*
- * Ne need to setup interrupt vector for NAND SPL
- * because NAND SPL never compiles it.
- */
-#if !defined(CONFIG_NAND_SPL)
+/* Interrupt vectors do not fit in minimal SPL. */
+#if !defined(MINIMAL_SPL)
 	/* Setup interrupt vectors */
 	lis	r1,CONFIG_SYS_MONITOR_BASE@h
 	mtspr	IVPR,r1
@@ -534,10 +500,6 @@ nexti:	mflr	r1		/* R1 = our PC */
 	li	r3, 0
 	mtspr	MAS1, r3
 1:	cmpw	r3, r14
-#if defined(CONFIG_SYS_PPC_E500_DEBUG_TLB) && !defined(CONFIG_NAND_SPL)
-	cmpwi	cr1, r3, CONFIG_SYS_PPC_E500_DEBUG_TLB
-	cror	cr0*4+eq, cr0*4+eq, cr1*4+eq
-#endif
 	rlwinm	r5, r3, 16, MAS0_ESEL_MSK
 	addi	r3, r3, 1
 	beq	2f		/* skip the entry we're executing from */
@@ -553,6 +515,46 @@ nexti:	mflr	r1		/* R1 = our PC */
 2:	cmpw	r3, r4
 	blt	1b
 
+#if defined(CONFIG_SYS_PPC_E500_DEBUG_TLB) && !defined(MINIMAL_SPL)
+/*
+ * TLB entry for debuggging in AS1
+ * Create temporary TLB entry in AS0 to handle debug exception
+ * As on debug exception MSR is cleared i.e. Address space is changed
+ * to 0. A TLB entry (in AS0) is required to handle debug exception generated
+ * in AS1.
+ */
+
+#ifdef NOR_BOOT
+/*
+ * TLB entry is created for IVPR + IVOR15 to map on valid OP code address
+ * bacause flash's virtual address maps to 0xff800000 - 0xffffffff.
+ * and this window is outside of 4K boot window.
+ */
+	create_tlb1_entry CONFIG_SYS_PPC_E500_DEBUG_TLB, \
+		0, BOOKE_PAGESZ_4M, \
+		CONFIG_SYS_MONITOR_BASE & 0xffc00000,  MAS2_I|MAS2_G, \
+		0xffc00000, MAS3_SX|MAS3_SW|MAS3_SR, \
+		0, r6
+
+#elif !defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SECURE_BOOT)
+	create_tlb1_entry CONFIG_SYS_PPC_E500_DEBUG_TLB, \
+		0, BOOKE_PAGESZ_1M, \
+		CONFIG_SYS_MONITOR_BASE, MAS2_I|MAS2_G, \
+		CONFIG_SYS_PBI_FLASH_WINDOW, MAS3_SX|MAS3_SW|MAS3_SR, \
+		0, r6
+#else
+/*
+ * TLB entry is created for IVPR + IVOR15 to map on valid OP code address
+ * because "nexti" will resize TLB to 4K
+ */
+	create_tlb1_entry CONFIG_SYS_PPC_E500_DEBUG_TLB, \
+		0, BOOKE_PAGESZ_256K, \
+		CONFIG_SYS_MONITOR_BASE & 0xfffc0000, MAS2_I, \
+		CONFIG_SYS_MONITOR_BASE & 0xfffc0000, MAS3_SX|MAS3_SW|MAS3_SR, \
+		0, r6
+#endif
+#endif
+
 /*
  * Relocate CCSR, if necessary.  We relocate CCSR if (obviously) the default
  * location is not where we want it.  This typically happens on a 36-bit
@@ -1036,7 +1038,7 @@ create_init_ram_area:
 	lis     r6,FSL_BOOKE_MAS0(1, 15, 0)@h
 	ori     r6,r6,FSL_BOOKE_MAS0(1, 15, 0)@l
 
-#if !defined(CONFIG_SYS_RAMBOOT) && !defined(CONFIG_SECURE_BOOT)
+#ifdef NOR_BOOT
 	/* create a temp mapping in AS=1 to the 4M boot window */
 	create_tlb1_entry 15, \
 		1, BOOKE_PAGESZ_4M, \
@@ -1050,8 +1052,8 @@ create_init_ram_area:
 	*/
 	create_tlb1_entry 15, \
 		1, BOOKE_PAGESZ_1M, \
-		CONFIG_SYS_MONITOR_BASE, MAS2_I|MAS2_G, \
-		CONFIG_SYS_PBI_FLASH_WINDOW, MAS3_SX|MAS3_SW|MAS3_SR, \
+		CONFIG_SYS_MONITOR_BASE & 0xfff00000, MAS2_I|MAS2_G, \
+		CONFIG_SYS_PBI_FLASH_WINDOW & 0xfff00000, MAS3_SX|MAS3_SW|MAS3_SR, \
 		0, r6
 #else
 	/*
@@ -1060,8 +1062,8 @@ create_init_ram_area:
 	 */
 	create_tlb1_entry 15, \
 		1, BOOKE_PAGESZ_1M, \
-		CONFIG_SYS_MONITOR_BASE, MAS2_I|MAS2_G, \
-		CONFIG_SYS_MONITOR_BASE, MAS3_SX|MAS3_SW|MAS3_SR, \
+		CONFIG_SYS_MONITOR_BASE & 0xfff00000, MAS2_I|MAS2_G, \
+		CONFIG_SYS_MONITOR_BASE & 0xfff00000, MAS3_SX|MAS3_SW|MAS3_SR, \
 		0, r6
 #endif
 
@@ -1111,7 +1113,8 @@ switch_as:
 	bdnz	1b
 
 	/* Jump out the last 4K page and continue to 'normal' start */
-#ifdef CONFIG_SYS_RAMBOOT
+#if defined(CONFIG_SYS_RAMBOOT) || defined(CONFIG_SPL)
+	/* We assume that we're already running at the address we're linked at */
 	b	_start_cont
 #else
 	/* Calculate absolute address in FLASH and jump there		*/
@@ -1157,7 +1160,7 @@ _start_cont:
 
 	/* NOTREACHED - board_init_f() does not return */
 
-#ifndef CONFIG_NAND_SPL
+#ifndef MINIMAL_SPL
 	. = EXC_OFF_SYS_RESET
 	.globl	_start_of_vectors
 _start_of_vectors:
@@ -1601,7 +1604,7 @@ in32:
 in32r:
 	lwbrx	r3,r0,r3
 	blr
-#endif  /* !CONFIG_NAND_SPL */
+#endif  /* !MINIMAL_SPL */
 
 /*------------------------------------------------------------------------------*/
 
@@ -1798,7 +1801,7 @@ clear_bss:
 	mr	r4,r10		/* Destination Address		*/
 	bl	board_init_r
 
-#ifndef CONFIG_NAND_SPL
+#ifndef MINIMAL_SPL
 	/*
 	 * Copy exception vector code to low memory
 	 *
@@ -1971,4 +1974,4 @@ setup_ivors:
 
 #include "fixed_ivor.S"
 	blr
-#endif /* !CONFIG_NAND_SPL */
+#endif /* !MINIMAL_SPL */

arch/powerpc/cpu/mpc85xx/tlb.c

@@ -55,7 +55,7 @@ void init_tlbs(void)
 	return ;
 }
 
-#ifndef CONFIG_NAND_SPL
+#if !defined(CONFIG_NAND_SPL) && !defined(CONFIG_SPL_BUILD)
 void read_tlbcam_entry(int idx, u32 *valid, u32 *tsize, unsigned long *epn,
 		       phys_addr_t *rpn)
 {
@@ -332,4 +332,4 @@ void clear_ddr_tlbs(unsigned int memsize_in_meg)
 }
 
 
-#endif /* !CONFIG_NAND_SPL */
+#endif /* not SPL */

arch/powerpc/cpu/mpc85xx/u-boot-spl.lds

@@ -0,0 +1,87 @@
+/*
+ * (C) Copyright 2006
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de
+ *
+ * Copyright 2009 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include "config.h"	/* CONFIG_BOARDDIR */
+
+OUTPUT_ARCH(powerpc)
+SECTIONS
+{
+	. = CONFIG_SPL_TEXT_BASE;
+	.text : {
+		*(.text*)
+	}
+	_etext = .;
+
+	.reloc : {
+		_GOT2_TABLE_ = .;
+		KEEP(*(.got2))
+		KEEP(*(.got))
+		PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4);
+		_FIXUP_TABLE_ = .;
+		KEEP(*(.fixup))
+	}
+	__got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1;
+	__fixup_entries = (. - _FIXUP_TABLE_) >> 2;
+
+	. = ALIGN(8);
+	.data : {
+		*(.rodata*)
+		*(.data*)
+		*(.sdata*)
+	}
+	_edata  =  .;
+
+	. = ALIGN(8);
+	__init_begin = .;
+	__init_end = .;
+/* FIXME for non-NAND SPL */
+#if defined(CONFIG_FSL_IFC) /* Restrict bootpg at 4K boundry for IFC */
+	.bootpg ADDR(.text) + 0x1000 :
+	{
+		start.o	(.bootpg)
+	}
+#define RESET_VECTOR_OFFSET 0x1ffc /* IFC has 8K sram */
+#elif defined(CONFIG_FSL_ELBC)
+#define RESET_VECTOR_OFFSET 0xffc /* LBC has 4k sram */
+#else
+#error unknown NAND controller
+#endif
+	.resetvec ADDR(.text) + RESET_VECTOR_OFFSET : {
+		KEEP(*(.resetvec))
+	} = 0xffff
+
+	/*
+	 * Make sure that the bss segment isn't linked at 0x0, otherwise its
+	 * address won't be updated during relocation fixups.
+	 */
+	. |= 0x10;
+
+	__bss_start = .;
+	.bss : {
+		*(.sbss*)
+		*(.bss*)
+	}
+	__bss_end__ = .;
+}

arch/powerpc/cpu/mpc86xx/ddr-8641.c

@@ -22,10 +22,10 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
 
 	switch (ctrl_num) {
 	case 0:
-		ddr = (void *)CONFIG_SYS_MPC86xx_DDR_ADDR;
+		ddr = (void *)CONFIG_SYS_MPC8xxx_DDR_ADDR;
 		break;
 	case 1:
-		ddr = (void *)CONFIG_SYS_MPC86xx_DDR2_ADDR;
+		ddr = (void *)CONFIG_SYS_MPC8xxx_DDR2_ADDR;
 		break;
 	default:
 		printf("%s unexpected ctrl_num = %u\n", __FUNCTION__, ctrl_num);

arch/powerpc/cpu/mpc8xxx/Makefile

@@ -10,6 +10,20 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib8xxx.o
 
+MINIMAL=
+
+ifdef CONFIG_SPL_BUILD
+ifdef CONFIG_SPL_INIT_MINIMAL
+MINIMAL=y
+endif
+endif
+
+ifdef MINIMAL
+
+COBJS-$(CONFIG_FSL_LAW) += law.o
+
+else
+
 ifneq ($(CPU),mpc83xx)
 COBJS-y	+= cpu.o
 endif
@@ -18,6 +32,9 @@ COBJS-$(CONFIG_OF_LIBFDT) += fdt.o
 COBJS-$(CONFIG_FSL_IFC) += fsl_ifc.o
 COBJS-$(CONFIG_FSL_LBC) += fsl_lbc.o
 COBJS-$(CONFIG_SYS_SRIO) += srio.o
+COBJS-$(CONFIG_FSL_LAW) += law.o
+
+endif
 
 SRCS	:= $(START:.o=.S) $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
 OBJS	:= $(addprefix $(obj),$(SOBJS-y) $(COBJS-y))

arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c

@@ -18,15 +18,7 @@
 
 #include "ddr.h"
 
-#ifdef CONFIG_MPC83xx
-	#define _DDR_ADDR CONFIG_SYS_MPC83xx_DDR_ADDR
-#elif defined(CONFIG_MPC85xx)
-	#define _DDR_ADDR CONFIG_SYS_MPC85xx_DDR_ADDR
-#elif defined(CONFIG_MPC86xx)
-	#define _DDR_ADDR CONFIG_SYS_MPC86xx_DDR_ADDR
-#else
-	#error "Undefined _DDR_ADDR"
-#endif
+#define _DDR_ADDR CONFIG_SYS_MPC8xxx_DDR_ADDR
 
 static u32 fsl_ddr_get_version(void)
 {

arch/powerpc/cpu/mpc8xxx/ddr/util.c

@@ -133,14 +133,8 @@ u32 fsl_ddr_get_intl3r(void)
 
 void board_add_ram_info(int use_default)
 {
-#if defined(CONFIG_MPC83xx)
-	immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-	ccsr_ddr_t *ddr = (void *)&immap->ddr;
-#elif defined(CONFIG_MPC85xx)
-	ccsr_ddr_t *ddr = (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR);
-#elif defined(CONFIG_MPC86xx)
-	ccsr_ddr_t *ddr = (void *)(CONFIG_SYS_MPC86xx_DDR_ADDR);
-#endif
+	ccsr_ddr_t *ddr = (void *)(CONFIG_SYS_MPC8xxx_DDR_ADDR);
+
 #if	defined(CONFIG_E6500) && (CONFIG_NUM_DDR_CONTROLLERS == 3)
 	u32 *mcintl3r = (void *) (CONFIG_SYS_IMMR + 0x18004);
 #endif
@@ -152,13 +146,13 @@ void board_add_ram_info(int use_default)
 
 #if CONFIG_NUM_DDR_CONTROLLERS >= 2
 	if (!(sdram_cfg & SDRAM_CFG_MEM_EN)) {
-		ddr = (void __iomem *)CONFIG_SYS_MPC85xx_DDR2_ADDR;
+		ddr = (void __iomem *)CONFIG_SYS_MPC8xxx_DDR2_ADDR;
 		sdram_cfg = in_be32(&ddr->sdram_cfg);
 	}
 #endif
 #if CONFIG_NUM_DDR_CONTROLLERS >= 3
 	if (!(sdram_cfg & SDRAM_CFG_MEM_EN)) {
-		ddr = (void __iomem *)CONFIG_SYS_MPC85xx_DDR3_ADDR;
+		ddr = (void __iomem *)CONFIG_SYS_MPC8xxx_DDR3_ADDR;
 		sdram_cfg = in_be32(&ddr->sdram_cfg);
 	}
 #endif

arch/powerpc/cpu/mpc8xxx/fdt.c

@@ -217,7 +217,7 @@ void fdt_fixup_dr_usb(void *blob, bd_t *bd)
 #if CONFIG_SYS_FSL_SEC_COMPAT == 2 /* SEC 2.x/3.x */
 void fdt_fixup_crypto_node(void *blob, int sec_rev)
 {
-	const struct sec_rev_prop {
+	static const struct sec_rev_prop {
 		u32 sec_rev;
 		u32 num_channels;
 		u32 channel_fifo_len;
@@ -232,8 +232,8 @@ void fdt_fixup_crypto_node(void *blob, int sec_rev)
 		{ 0x0301, 4, 24, 0xbfe, 0x03ab0ebf }, /* SEC 3.1 */
 		{ 0x0303, 4, 24, 0x97c, 0x03a30abf }, /* SEC 3.3 */
 	};
-	char compat_strlist[ARRAY_SIZE(sec_rev_prop_list) *
-			    sizeof("fsl,secX.Y")];
+	static char compat_strlist[ARRAY_SIZE(sec_rev_prop_list) *
+				   sizeof("fsl,secX.Y")];
 	int crypto_node, sec_idx, err;
 	char *p;
 	u32 val;

drivers/misc/fsl_law.c → arch/powerpc/cpu/mpc8xxx/law.c

@@ -92,7 +92,7 @@ void disable_law(u8 idx)
 	return;
 }
 
-#ifndef CONFIG_NAND_SPL
+#if !defined(CONFIG_NAND_SPL) && !defined(CONFIG_SPL_BUILD)
 static int get_law_entry(u8 i, struct law_entry *e)
 {
 	u32 lawar;
@@ -122,7 +122,7 @@ int set_next_law(phys_addr_t addr, enum law_size sz, enum law_trgt_if id)
 	return idx;
 }
 
-#ifndef CONFIG_NAND_SPL
+#if !defined(CONFIG_NAND_SPL) && !defined(CONFIG_SPL_BUILD)
 int set_last_law(phys_addr_t addr, enum law_size sz, enum law_trgt_if id)
 {
 	u32 idx;
@@ -233,7 +233,7 @@ int set_ddr_laws(u64 start, u64 sz, enum law_trgt_if id)
 
 	return 0;
 }
-#endif
+#endif /* not SPL */
 
 void init_laws(void)
 {
@@ -258,9 +258,10 @@ void init_laws(void)
 			gd->used_laws |= (1 << i);
 	}
 
-#if defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
+#if (defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)) || \
+	(defined(CONFIG_SPL) && !defined(CONFIG_SPL_BUILD))
 	/*
-	 * in NAND boot we've already parsed the law_table and setup those LAWs
+	 * in SPL boot we've already parsed the law_table and setup those LAWs
 	 * so don't do it again.
 	 */
 	return;

arch/powerpc/cpu/ppc4xx/usb_ohci.c

@@ -621,7 +621,7 @@ static ed_t * ep_add_ed (struct usb_device *usb_dev, unsigned long pipe)
 			| usb_pipeendpoint (pipe) << 7
 			| (usb_pipeisoc (pipe)? 0x8000: 0)
 			| (usb_pipecontrol (pipe)? 0: (usb_pipeout (pipe)? 0x800: 0x1000))
-			| usb_pipeslow (pipe) << 13
+			| (usb_dev->speed == USB_SPEED_LOW) << 13
 			| usb_maxpacket (usb_dev, pipe) << 16);
 
 	return ed_ret;

arch/powerpc/include/asm/config_mpc85xx.h

@@ -27,6 +27,12 @@
 #error "Do not define CONFIG_SYS_CCSRBAR_DEFAULT in the board header file."
 #endif
 
+/*
+ * This macro should be removed when we no longer care about backwards
+ * compatibility with older operating systems.
+ */
+#define CONFIG_PPC_SPINTABLE_COMPATIBLE
+
 #define FSL_DDR_VER_4_7	47
 
 /* Number of TLB CAM entries we have on FSL Book-E chips */
@@ -131,7 +137,6 @@
 #define CONFIG_SYS_PPC_E500_DEBUG_TLB	3
 #define CONFIG_TSECV2
 #define CONFIG_SYS_FSL_SEC_COMPAT	4
-#define CONFIG_FSL_SATA_V2
 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111
 #define CONFIG_NUM_DDR_CONTROLLERS	1
 #define CONFIG_SYS_CCSRBAR_DEFAULT	0xff700000
@@ -175,7 +180,6 @@
 #define CONFIG_SYS_PPC_E500_DEBUG_TLB	2
 #define CONFIG_TSECV2
 #define CONFIG_SYS_FSL_SEC_COMPAT	2
-#define CONFIG_FSL_SATA_V2
 #define CONFIG_SYS_CCSRBAR_DEFAULT	0xff700000
 #define CONFIG_SYS_FSL_ERRATUM_ELBC_A001
 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111
@@ -188,7 +192,6 @@
 #define CONFIG_SYS_PPC_E500_DEBUG_TLB	3
 #define CONFIG_TSECV2
 #define CONFIG_SYS_FSL_SEC_COMPAT	4
-#define CONFIG_FSL_SATA_V2
 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111
 #define CONFIG_NUM_DDR_CONTROLLERS	1
 #define CONFIG_SYS_CCSRBAR_DEFAULT	0xff700000
@@ -242,7 +245,6 @@
 #define CONFIG_SYS_PPC_E500_DEBUG_TLB	2
 #define CONFIG_TSECV2
 #define CONFIG_SYS_FSL_SEC_COMPAT	2
-#define CONFIG_FSL_SATA_V2
 #define CONFIG_SYS_CCSRBAR_DEFAULT	0xff700000
 #define CONFIG_SYS_FSL_ERRATUM_ELBC_A001
 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111
@@ -318,7 +320,6 @@
 #define CONFIG_SYS_FSL_NUM_CC_PLLS	2
 #define CONFIG_SYS_FSL_NUM_LAWS		32
 #define CONFIG_SYS_FSL_SEC_COMPAT	4
-#define CONFIG_FSL_SATA_V2
 #define CONFIG_SYS_NUM_FMAN		1
 #define CONFIG_SYS_NUM_FM1_DTSEC	5
 #define CONFIG_SYS_NUM_FM1_10GEC	1
@@ -343,6 +344,7 @@
 #define CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV2	0x11
 #define CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY 0xf0000000
 #define CONFIG_SYS_FSL_ERRATUM_SRIO_A004034
+#define CONFIG_SYS_FSL_ERRATUM_A004849
 
 #elif defined(CONFIG_PPC_P3041)
 #define CONFIG_SYS_FSL_QORIQ_CHASSIS1
@@ -350,7 +352,6 @@
 #define CONFIG_SYS_FSL_NUM_CC_PLLS	2
 #define CONFIG_SYS_FSL_NUM_LAWS		32
 #define CONFIG_SYS_FSL_SEC_COMPAT	4
-#define CONFIG_FSL_SATA_V2
 #define CONFIG_SYS_NUM_FMAN		1
 #define CONFIG_SYS_NUM_FM1_DTSEC	5
 #define CONFIG_SYS_NUM_FM1_10GEC	1
@@ -375,6 +376,7 @@
 #define CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV2	0x11
 #define CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY 0xf0000000
 #define CONFIG_SYS_FSL_ERRATUM_SRIO_A004034
+#define CONFIG_SYS_FSL_ERRATUM_A004849
 
 #elif defined(CONFIG_PPC_P4080) /* also supports P4040 */
 #define CONFIG_SYS_FSL_QORIQ_CHASSIS1
@@ -417,6 +419,9 @@
 #define CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV	0x20
 #define CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY 0xff000000
 #define CONFIG_SYS_FSL_ERRATUM_SRIO_A004034
+#define CONFIG_SYS_FSL_ERRATUM_A004849
+#define CONFIG_SYS_FSL_ERRATUM_A004580
+#define CONFIG_SYS_P4080_ERRATUM_PCIE_A003
 
 #elif defined(CONFIG_PPC_P5020) /* also supports P5010 */
 #define CONFIG_SYS_PPC64		/* 64-bit core */
@@ -425,7 +430,6 @@
 #define CONFIG_SYS_FSL_NUM_CC_PLLS	2
 #define CONFIG_SYS_FSL_NUM_LAWS		32
 #define CONFIG_SYS_FSL_SEC_COMPAT	4
-#define CONFIG_FSL_SATA_V2
 #define CONFIG_SYS_NUM_FMAN		1
 #define CONFIG_SYS_NUM_FM1_DTSEC	5
 #define CONFIG_SYS_NUM_FM1_10GEC	1
@@ -449,6 +453,7 @@
 #define CONFIG_SYS_FSL_ERRATUM_SRIO_A004034
 
 #elif defined(CONFIG_PPC_P5040)
+#define CONFIG_SYS_PPC64
 #define CONFIG_SYS_FSL_QORIQ_CHASSIS1
 #define CONFIG_MAX_CPUS			4
 #define CONFIG_SYS_FSL_NUM_CC_PLLS	3
@@ -472,7 +477,6 @@
 #define CONFIG_SYS_FSL_ERRATUM_DDR_A003
 #define CONFIG_SYS_FSL_ERRATUM_DDR_A003474
 #define CONFIG_SYS_FSL_ERRATUM_A004699
-#define CONFIG_SYS_FSL_ELBC_MULTIBIT_ECC
 #define CONFIG_SYS_FSL_ERRATUM_A004510
 #define CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV	0x10
 #define CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY 0xf0000000

arch/powerpc/include/asm/immap_83xx.h

@@ -1035,9 +1035,9 @@ typedef struct immap {
 } immap_t;
 #endif
 
-#define CONFIG_SYS_MPC83xx_DDR_OFFSET	(0x2000)
-#define CONFIG_SYS_MPC83xx_DDR_ADDR \
-			(CONFIG_SYS_IMMR + CONFIG_SYS_MPC83xx_DDR_OFFSET)
+#define CONFIG_SYS_MPC8xxx_DDR_OFFSET	(0x2000)
+#define CONFIG_SYS_MPC8xxx_DDR_ADDR \
+			(CONFIG_SYS_IMMR + CONFIG_SYS_MPC8xxx_DDR_OFFSET)
 #define CONFIG_SYS_MPC83xx_DMA_OFFSET	(0x8000)
 #define CONFIG_SYS_MPC83xx_DMA_ADDR \
 			(CONFIG_SYS_IMMR + CONFIG_SYS_MPC83xx_DMA_OFFSET)

arch/powerpc/include/asm/immap_85xx.h

@@ -2619,7 +2619,7 @@ typedef struct serdes_corenet {
 #define SRDS_PCCR2_RST_XGMII1		0x00800000
 #define SRDS_PCCR2_RST_XGMII2		0x00400000
 	u32	res5[197];
-	struct {
+	struct serdes_lane {
 		u32	gcr0;	/* General Control Register 0 */
 #define SRDS_GCR0_RRST			0x00400000
 #define SRDS_GCR0_1STLANE		0x00010000
@@ -2637,8 +2637,11 @@ typedef struct serdes_corenet {
 		u32	res3;
 		u32	ttlcr0;	/* Transition Tracking Loop Ctrl 0 */
 #define SRDS_TTLCR0_FLT_SEL_MASK	0x3f000000
+#define SRDS_TTLCR0_FLT_SEL_KFR_26	0x10000000
+#define SRDS_TTLCR0_FLT_SEL_KPH_28	0x08000000
 #define SRDS_TTLCR0_FLT_SEL_750PPM	0x03000000
 #define SRDS_TTLCR0_PM_DIS		0x00004000
+#define SRDS_TTLCR0_FREQOVD_EN		0x00000001
 		u32	res4[7];
 	} lane[24];
 	u32 res6[384];
@@ -2867,9 +2870,9 @@ struct ccsr_pman {
 #define CONFIG_SYS_FSL_CORENET_PMAN2_OFFSET	0x5000
 #define CONFIG_SYS_FSL_CORENET_PMAN3_OFFSET	0x6000
 #endif
-#define CONFIG_SYS_MPC85xx_DDR_OFFSET		0x8000
-#define CONFIG_SYS_MPC85xx_DDR2_OFFSET		0x9000
-#define CONFIG_SYS_MPC85xx_DDR3_OFFSET		0xA000
+#define CONFIG_SYS_MPC8xxx_DDR_OFFSET		0x8000
+#define CONFIG_SYS_MPC8xxx_DDR2_OFFSET		0x9000
+#define CONFIG_SYS_MPC8xxx_DDR3_OFFSET		0xA000
 #define CONFIG_SYS_FSL_CORENET_CLK_OFFSET	0xE1000
 #define CONFIG_SYS_FSL_CORENET_RCPM_OFFSET	0xE2000
 #define CONFIG_SYS_FSL_CORENET_SERDES_OFFSET	0xEA000
@@ -2929,9 +2932,9 @@ struct ccsr_pman {
 #define CONFIG_SYS_FSL_CLUSTER_1_L2_OFFSET	0xC20000
 #else
 #define CONFIG_SYS_MPC85xx_ECM_OFFSET		0x0000
-#define CONFIG_SYS_MPC85xx_DDR_OFFSET		0x2000
+#define CONFIG_SYS_MPC8xxx_DDR_OFFSET		0x2000
 #define CONFIG_SYS_MPC85xx_LBC_OFFSET		0x5000
-#define CONFIG_SYS_MPC85xx_DDR2_OFFSET		0x6000
+#define CONFIG_SYS_MPC8xxx_DDR2_OFFSET		0x6000
 #define CONFIG_SYS_MPC85xx_ESPI_OFFSET		0x7000
 #define CONFIG_SYS_MPC85xx_PCI1_OFFSET		0x8000
 #define CONFIG_SYS_MPC85xx_PCIX_OFFSET		0x8000
@@ -2998,12 +3001,12 @@ struct ccsr_pman {
 	(CONFIG_SYS_IMMR + CONFIG_SYS_FSL_CORENET_RCPM_OFFSET)
 #define CONFIG_SYS_MPC85xx_ECM_ADDR \
 	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_ECM_OFFSET)
-#define CONFIG_SYS_MPC85xx_DDR_ADDR \
-	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_DDR_OFFSET)
-#define CONFIG_SYS_MPC85xx_DDR2_ADDR \
-	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_DDR2_OFFSET)
-#define CONFIG_SYS_MPC85xx_DDR3_ADDR \
-	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_DDR3_OFFSET)
+#define CONFIG_SYS_MPC8xxx_DDR_ADDR \
+	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC8xxx_DDR_OFFSET)
+#define CONFIG_SYS_MPC8xxx_DDR2_ADDR \
+	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC8xxx_DDR2_OFFSET)
+#define CONFIG_SYS_MPC8xxx_DDR3_ADDR \
+	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC8xxx_DDR3_OFFSET)
 #define CONFIG_SYS_LBC_ADDR \
 	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_LBC_OFFSET)
 #define CONFIG_SYS_IFC_ADDR \

arch/powerpc/include/asm/immap_86xx.h

@@ -1252,10 +1252,10 @@ typedef struct immap {
 
 extern immap_t  *immr;
 
-#define CONFIG_SYS_MPC86xx_DDR_OFFSET	0x2000
-#define CONFIG_SYS_MPC86xx_DDR_ADDR	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC86xx_DDR_OFFSET)
-#define CONFIG_SYS_MPC86xx_DDR2_OFFSET	0x6000
-#define CONFIG_SYS_MPC86xx_DDR2_ADDR	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC86xx_DDR2_OFFSET)
+#define CONFIG_SYS_MPC8xxx_DDR_OFFSET	0x2000
+#define CONFIG_SYS_MPC8xxx_DDR_ADDR	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC8xxx_DDR_OFFSET)
+#define CONFIG_SYS_MPC8xxx_DDR2_OFFSET	0x6000
+#define CONFIG_SYS_MPC8xxx_DDR2_ADDR	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC8xxx_DDR2_OFFSET)
 #define CONFIG_SYS_MPC86xx_DMA_OFFSET	0x21000
 #define CONFIG_SYS_MPC86xx_DMA_ADDR	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC86xx_DMA_OFFSET)
 #define CONFIG_SYS_MPC86xx_PIC_OFFSET	0x40000

arch/powerpc/include/asm/processor.h

@@ -1342,4 +1342,10 @@ void _nmask_and_or_msr(unsigned long nmask, unsigned long or_val);
 #endif
 #endif /* CONFIG_MACH_SPECIFIC */
 
+#if defined(CONFIG_MPC85xx) || defined(CONFIG_440)
+ #define EPAPR_MAGIC	(0x45504150)
+#else
+ #define EPAPR_MAGIC	(0x65504150)
+#endif
+
 #endif /* __ASM_PPC_PROCESSOR_H */

board/chromebook-x86/coreboot/coreboot_pci.c → arch/powerpc/include/asm/spl.h

@@ -1,10 +1,6 @@
 /*
- * Copyright (c) 2011 The Chromium OS Authors.
- * (C) Copyright 2008,2009
- * Graeme Russ, <graeme.russ@gmail.com>
- *
- * (C) Copyright 2002
- * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
+ * (C) Copyright 2012
+ * Texas Instruments, <www.ti.com>
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -16,7 +12,7 @@
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
@@ -24,7 +20,12 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  * MA 02111-1307 USA
  */
+#ifndef	_ASM_SPL_H_
+#define	_ASM_SPL_H_
+
+#define BOOT_DEVICE_NOR		1
+
+/* Linker symbols */
+extern char __bss_start[], __bss_end__[];
 
-void pci_init_board(void)
-{
-}
+#endif

arch/powerpc/include/asm/string.h

@@ -14,7 +14,7 @@
 #define __HAVE_ARCH_MEMCHR
 
 extern int strcasecmp(const char *, const char *);
-extern int strncasecmp(const char *, const char *, int);
+extern int strncasecmp(const char *, const char *, __kernel_size_t);
 extern char * strcpy(char *,const char *);
 extern char * strncpy(char *,const char *, __kernel_size_t);
 extern __kernel_size_t strlen(const char *);

arch/powerpc/lib/Makefile

@@ -38,13 +38,28 @@ endif
 
 LIB	= $(obj)lib$(ARCH).o
 
-SOBJS-y	+= ppccache.o
+MINIMAL=
+
+ifdef CONFIG_SPL_BUILD
+ifdef CONFIG_SPL_INIT_MINIMAL
+MINIMAL=y
+endif
+endif
+
+ifdef MINIMAL
+COBJS-y += cache.o
+else
+
 SOBJS-y	+= ppcstring.o
+
+SOBJS-y	+= ppccache.o
 SOBJS-y	+= ticks.o
 SOBJS-y	+= reloc.o
 
 COBJS-$(CONFIG_BAT_RW) += bat_rw.o
+ifndef CONFIG_SPL_BUILD
 COBJS-y	+= board.o
+endif
 COBJS-y	+= bootm.o
 COBJS-y	+= cache.o
 COBJS-y	+= extable.o
@@ -53,6 +68,11 @@ COBJS-$(CONFIG_CMD_KGDB) += kgdb.o
 COBJS-${CONFIG_CMD_IDE} += ide.o
 COBJS-y	+= time.o
 
+# Don't include the MPC5xxx special memcpy into the
+# SPL U-Boot image. memcpy is used in the SPL NOR
+# flash driver. And we need the real, fast memcpy
+# here. We have no problems with unaligned access.
+ifndef CONFIG_SPL_BUILD
 # Workaround for local bus unaligned access problems
 # on MPC512x and MPC5200
 ifdef CONFIG_MPC512X
@@ -63,6 +83,13 @@ ifdef CONFIG_MPC5200
 $(obj)ppcstring.o: AFLAGS += -Dmemcpy=__memcpy
 COBJS-y += memcpy_mpc5200.o
 endif
+endif
+
+endif # not minimal
+
+ifdef CONFIG_SPL_BUILD
+COBJS-$(CONFIG_SPL_FRAMEWORK) += spl.o
+endif
 
 COBJS	+= $(sort $(COBJS-y))
 
@@ -75,12 +102,6 @@ TARGETS += $(LIB)
 all: $(TARGETS)
 
 $(LIB):	$(obj).depend $(OBJS)
-	@if ! $(CROSS_COMPILE)readelf -S $(OBJS) | grep -q '\.fixup.*PROGBITS';\
-	then \
-		echo "ERROR: Your compiler doesn't generate .fixup sections!";\
-		echo "       Upgrade to a recent toolchain."; \
-		exit 1; \
-	fi;
 	$(call cmd_link_o_target, $(OBJS))
 
 $(LIBGCC): $(obj).depend $(LGOBJS)

arch/powerpc/lib/board.c

@@ -739,16 +739,13 @@ void board_init_r(gd_t *id, ulong dest_addr)
 		flash_size = 0;
 	} else if ((flash_size = flash_init()) > 0) {
 #ifdef CONFIG_SYS_FLASH_CHECKSUM
-		char *s;
-
 		print_size(flash_size, "");
 		/*
 		 * Compute and print flash CRC if flashchecksum is set to 'y'
 		 *
 		 * NOTE: Maybe we should add some WATCHDOG_RESET()? XXX
 		 */
-		s = getenv("flashchecksum");
-		if (s && (*s == 'y')) {
+		if (getenv_yesno("flashchecksum") == 1) {
 			printf("  CRC: %08X",
 			       crc32(0,
 				     (const unsigned char *)
@@ -841,9 +838,7 @@ void board_init_r(gd_t *id, ulong dest_addr)
 	 * "i2cfast" into account
 	 */
 	{
-		char *s = getenv("i2cfast");
-
-		if (s && ((*s == 'y') || (*s == 'Y'))) {
+		if (getenv_yesno("i2cfast") == 1) {
 			bd->bi_iic_fast[0] = 1;
 			bd->bi_iic_fast[1] = 1;
 		}

arch/powerpc/lib/bootm.c

@@ -87,12 +87,6 @@ static void boot_jump_linux(bootm_headers_t *images)
 		 *   r8: 0
 		 *   r9: 0
 		 */
-#if defined(CONFIG_MPC85xx) || defined(CONFIG_440)
- #define EPAPR_MAGIC	(0x45504150)
-#else
- #define EPAPR_MAGIC	(0x65504150)
-#endif
-
 		debug ("   Booting using OF flat tree...\n");
 		WATCHDOG_RESET ();
 		(*kernel) ((bd_t *)of_flat_tree, 0, 0, EPAPR_MAGIC,

arch/powerpc/lib/spl.c

@@ -0,0 +1,42 @@
+/*
+ * Copyright 2012 Stefan Roese <sr@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#include <common.h>
+#include <config.h>
+#include <spl.h>
+#include <image.h>
+#include <linux/compiler.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * This function jumps to an image with argument. Normally an FDT or ATAGS
+ * image.
+ * arg: Pointer to paramter image in RAM
+ */
+#ifdef CONFIG_SPL_OS_BOOT
+void __noreturn jump_to_image_linux(void *arg)
+{
+	debug("Entering kernel arg pointer: 0x%p\n", arg);
+	typedef void (*image_entry_arg_t)(void *, ulong r4, ulong r5, ulong r6,
+					  ulong r7, ulong r8, ulong r9)
+		__attribute__ ((noreturn));
+	image_entry_arg_t image_entry =
+		(image_entry_arg_t)spl_image.entry_point;
+
+	image_entry(arg, 0, 0, EPAPR_MAGIC, CONFIG_SYS_BOOTMAPSZ, 0, 0);
+}
+#endif /* CONFIG_SPL_OS_BOOT */

arch/sh/include/asm/system.h

@@ -274,8 +274,8 @@ void enable_hlt(void);
 
 static inline void trigger_address_error(void)
 {
+	set_bl_bit();
 	__asm__ __volatile__ (
-		"ldc %0, sr\n\t"
 		"mov.l @%1, %0"
 		:
 		: "r" (0x10000000), "r" (0x80000001)

arch/sparc/include/asm/string.h

@@ -40,7 +40,7 @@
 */
 
 extern int strcasecmp(const char *, const char *);
-extern int strncasecmp(const char *, const char *, int);
+extern int strncasecmp(const char *, const char *, __kernel_size_t);
 extern char *strcpy(char *, const char *);
 extern char *strncpy(char *, const char *, __kernel_size_t);
 extern __kernel_size_t strlen(const char *);

arch/sparc/lib/board.c

@@ -284,8 +284,7 @@ void board_init_f(ulong bootflag)
 		 *
 		 * NOTE: Maybe we should add some WATCHDOG_RESET()? XXX
 		 */
-		s = getenv("flashchecksum");
-		if (s && (*s == 'y')) {
+		if (getenv_yesno("flashchecksum") == 1) {
 			printf("  CRC: %08lX",
 			       crc32(0, (const unsigned char *)CONFIG_SYS_FLASH_BASE,
 				     flash_size)

arch/x86/cpu/Makefile

@@ -28,12 +28,13 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(CPU).o
 
-START	= start.o start16.o resetvec.o
-COBJS	= interrupts.o cpu.o
+START-y	= start.o
+RESET_OBJS-$(CONFIG_X86_NO_RESET_VECTOR) += resetvec.o start16.o
+COBJS	= interrupts.o cpu.o timer.o
 
 SRCS	:= $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
-START	:= $(addprefix $(obj),$(START))
+START	:= $(addprefix $(obj),$(START-y) $(RESET_OBJS-))
 
 all:	$(obj).depend $(START) $(LIB)
 

arch/x86/cpu/coreboot/Makefile

@@ -33,12 +33,13 @@ include $(TOPDIR)/config.mk
 
 LIB	:= $(obj)lib$(SOC).o
 
+SOBJS-$(CONFIG_SYS_COREBOOT) += car.o
+COBJS-$(CONFIG_SYS_COREBOOT) += coreboot.o
 COBJS-$(CONFIG_SYS_COREBOOT) += tables.o
 COBJS-$(CONFIG_SYS_COREBOOT) += ipchecksum.o
 COBJS-$(CONFIG_SYS_COREBOOT) += sdram.o
-COBJS-$(CONFIG_SYS_COREBOOT) += sysinfo.o
-
-SOBJS-$(CONFIG_SYS_COREBOOT) += coreboot_car.o
+COBJS-$(CONFIG_SYS_COREBOOT) += timestamp.o
+COBJS-$(CONFIG_PCI) += pci.o
 
 SRCS	:= $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
 OBJS	:= $(addprefix $(obj),$(SOBJS-y) $(COBJS-y))

board/BuS/eb_cpu5282/config.mk → arch/x86/cpu/coreboot/config.mk

@@ -1,7 +1,5 @@
 #
-# (C) Copyright 2000-2003
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-# Coldfire contribution by Bernhard Kuhn <bkuhn@metrowerks.com>
+# Copyright (c) 2012 The Chromium OS Authors.
 #
 # See file CREDITS for list of people who contributed to this
 # project.
@@ -22,6 +20,4 @@
 # MA 02111-1307 USA
 #
 
-ifndef CONFIG_SYS_TEXT_BASE
-CONFIG_SYS_TEXT_BASE = 0xFE000000
-endif
+CONFIG_ARCH_DEVICE_TREE := coreboot

board/chromebook-x86/coreboot/coreboot.c → arch/x86/cpu/coreboot/coreboot.c

@@ -26,13 +26,15 @@
 #include <asm/u-boot-x86.h>
 #include <flash.h>
 #include <netdev.h>
+#include <asm/msr.h>
+#include <asm/cache.h>
+#include <asm/io.h>
 #include <asm/arch-coreboot/tables.h>
 #include <asm/arch-coreboot/sysinfo.h>
+#include <asm/arch/timestamp.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
-unsigned long monitor_flash_len = CONFIG_SYS_MONITOR_LEN;
-
 /*
  * Miscellaneous platform dependent initializations
  */
@@ -41,6 +43,9 @@ int cpu_init_f(void)
 	int ret = get_coreboot_info(&lib_sysinfo);
 	if (ret != 0)
 		printf("Failed to parse coreboot tables.\n");
+
+	timestamp_init();
+
 	return ret;
 }
 
@@ -62,8 +67,29 @@ int board_early_init_r(void)
 
 void show_boot_progress(int val)
 {
-}
+#if MIN_PORT80_KCLOCKS_DELAY
+	static uint32_t prev_stamp;
+	static uint32_t base;
+
+	/*
+	 * Scale the time counter reading to avoid using 64 bit arithmetics.
+	 * Can't use get_timer() here becuase it could be not yet
+	 * initialized or even implemented.
+	 */
+	if (!prev_stamp) {
+		base = rdtsc() / 1000;
+		prev_stamp = 0;
+	} else {
+		uint32_t now;
 
+		do {
+			now = rdtsc() / 1000 - base;
+		} while (now < (prev_stamp + MIN_PORT80_KCLOCKS_DELAY));
+		prev_stamp = now;
+	}
+#endif
+	outb(val, 0x80);
+}
 
 int last_stage_init(void)
 {
@@ -82,6 +108,33 @@ int board_eth_init(bd_t *bis)
 	return pci_eth_init(bis);
 }
 
-void setup_pcat_compatibility()
+#define MTRR_TYPE_WP          5
+#define MTRRcap_MSR           0xfe
+#define MTRRphysBase_MSR(reg) (0x200 + 2 * (reg))
+#define MTRRphysMask_MSR(reg) (0x200 + 2 * (reg) + 1)
+
+int board_final_cleanup(void)
 {
+	/* Un-cache the ROM so the kernel has one
+	 * more MTRR available.
+	 *
+	 * Coreboot should have assigned this to the
+	 * top available variable MTRR.
+	 */
+	u8 top_mtrr = (native_read_msr(MTRRcap_MSR) & 0xff) - 1;
+	u8 top_type = native_read_msr(MTRRphysBase_MSR(top_mtrr)) & 0xff;
+
+	/* Make sure this MTRR is the correct Write-Protected type */
+	if (top_type == MTRR_TYPE_WP) {
+		disable_caches();
+		wrmsrl(MTRRphysBase_MSR(top_mtrr), 0);
+		wrmsrl(MTRRphysMask_MSR(top_mtrr), 0);
+		enable_caches();
+	}
+
+	/* Issue SMI to Coreboot to lock down ME and registers */
+	printf("Finalizing Coreboot\n");
+	outb(0xcb, 0xb2);
+
+	return 0;
 }

arch/x86/cpu/coreboot/pci.c

@@ -0,0 +1,65 @@
+/*
+ * Copyright (c) 2011 The Chromium OS Authors.
+ * (C) Copyright 2008,2009
+ * Graeme Russ, <graeme.russ@gmail.com>
+ *
+ * (C) Copyright 2002
+ * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <pci.h>
+#include <asm/pci.h>
+
+static struct pci_controller coreboot_hose;
+
+static void config_pci_bridge(struct pci_controller *hose, pci_dev_t dev,
+			      struct pci_config_table *table)
+{
+	u8 secondary;
+	hose->read_byte(hose, dev, PCI_SECONDARY_BUS, &secondary);
+	hose->last_busno = max(hose->last_busno, secondary);
+	pci_hose_scan_bus(hose, secondary);
+}
+
+static struct pci_config_table pci_coreboot_config_table[] = {
+	/* vendor, device, class, bus, dev, func */
+	{ PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_BRIDGE_PCI,
+		PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, &config_pci_bridge },
+	{}
+};
+
+void pci_init_board(void)
+{
+	coreboot_hose.config_table = pci_coreboot_config_table;
+	coreboot_hose.first_busno = 0;
+	coreboot_hose.last_busno = 0;
+
+	pci_set_region(coreboot_hose.regions + 0, 0x0, 0x0, 0xffffffff,
+		PCI_REGION_MEM);
+	coreboot_hose.region_count = 1;
+
+	pci_setup_type1(&coreboot_hose);
+
+	pci_register_hose(&coreboot_hose);
+
+	pci_hose_scan(&coreboot_hose);
+}

arch/x86/cpu/coreboot/sdram.c

@@ -27,8 +27,9 @@
 #include <asm/e820.h>
 #include <asm/u-boot-x86.h>
 #include <asm/global_data.h>
-#include <asm/arch-coreboot/sysinfo.h>
-#include <asm/arch-coreboot/tables.h>
+#include <asm/processor.h>
+#include <asm/arch/sysinfo.h>
+#include <asm/arch/tables.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -51,6 +52,58 @@ unsigned install_e820_map(unsigned max_entries, struct e820entry *entries)
 	return num_entries;
 }
 
+/*
+ * This function looks for the highest region of memory lower than 4GB which
+ * has enough space for U-Boot where U-Boot is aligned on a page boundary. It
+ * overrides the default implementation found elsewhere which simply picks the
+ * end of ram, wherever that may be. The location of the stack, the relocation
+ * address, and how far U-Boot is moved by relocation are set in the global
+ * data structure.
+ */
+int calculate_relocation_address(void)
+{
+	const uint64_t uboot_size = (uintptr_t)&__bss_end -
+			(uintptr_t)&__text_start;
+	const uint64_t total_size = uboot_size + CONFIG_SYS_MALLOC_LEN +
+		CONFIG_SYS_STACK_SIZE;
+	uintptr_t dest_addr = 0;
+	int i;
+
+	for (i = 0; i < lib_sysinfo.n_memranges; i++) {
+		struct memrange *memrange = &lib_sysinfo.memrange[i];
+		/* Force U-Boot to relocate to a page aligned address. */
+		uint64_t start = roundup(memrange->base, 1 << 12);
+		uint64_t end = memrange->base + memrange->size;
+
+		/* Ignore non-memory regions. */
+		if (memrange->type != CB_MEM_RAM)
+			continue;
+
+		/* Filter memory over 4GB. */
+		if (end > 0xffffffffULL)
+			end = 0x100000000ULL;
+		/* Skip this region if it's too small. */
+		if (end - start < total_size)
+			continue;
+
+		/* Use this address if it's the largest so far. */
+		if (end - uboot_size > dest_addr)
+			dest_addr = end;
+	}
+
+	/* If no suitable area was found, return an error. */
+	if (!dest_addr)
+		return 1;
+
+	dest_addr -= uboot_size;
+	dest_addr &= ~((1 << 12) - 1);
+	gd->relocaddr = dest_addr;
+	gd->reloc_off = dest_addr - (uintptr_t)&__text_start;
+	gd->start_addr_sp = dest_addr - CONFIG_SYS_MALLOC_LEN;
+
+	return 0;
+}
+
 int dram_init_f(void)
 {
 	int i;
@@ -71,5 +124,20 @@ int dram_init_f(void)
 
 int dram_init(void)
 {
+	int i, j;
+
+	if (CONFIG_NR_DRAM_BANKS) {
+		for (i = 0, j = 0; i < lib_sysinfo.n_memranges; i++) {
+			struct memrange *memrange = &lib_sysinfo.memrange[i];
+
+			if (memrange->type == CB_MEM_RAM) {
+				gd->bd->bi_dram[j].start = memrange->base;
+				gd->bd->bi_dram[j].size = memrange->size;
+				j++;
+				if (j >= CONFIG_NR_DRAM_BANKS)
+					break;
+			}
+		}
+	}
 	return 0;
 }

arch/x86/cpu/coreboot/sysinfo.c

@@ -1,39 +0,0 @@
-/*
- * This file is part of the libpayload project.
- *
- * Copyright (C) 2008 Advanced Micro Devices, Inc.
- * Copyright (C) 2009 coresystems GmbH
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. The name of the author may not be used to endorse or promote products
- *    derived from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#include <asm/arch-coreboot/sysinfo.h>
-
-/*
- * This needs to be in the .data section so that it's copied over during
- * relocation. By default it's put in the .bss section which is simply filled
- * with zeroes when transitioning from "ROM", which is really RAM, to other
- * RAM.
- */
-struct sysinfo_t lib_sysinfo __attribute__((section(".data")));

arch/x86/cpu/coreboot/tables.c

@@ -28,10 +28,19 @@
  * SUCH DAMAGE.
  */
 
+#include <common.h>
 #include <asm/arch-coreboot/ipchecksum.h>
 #include <asm/arch-coreboot/sysinfo.h>
 #include <asm/arch-coreboot/tables.h>
 
+/*
+ * This needs to be in the .data section so that it's copied over during
+ * relocation. By default it's put in the .bss section which is simply filled
+ * with zeroes when transitioning from "ROM", which is really RAM, to other
+ * RAM.
+ */
+struct sysinfo_t lib_sysinfo __attribute__((section(".data")));
+
 /*
  * Some of this is x86 specific, and the rest of it is generic. Right now,
  * since we only support x86, we'll avoid trying to make lots of infrastructure
@@ -72,22 +81,45 @@ static void cb_parse_memory(unsigned char *ptr, struct sysinfo_t *info)
 static void cb_parse_serial(unsigned char *ptr, struct sysinfo_t *info)
 {
 	struct cb_serial *ser = (struct cb_serial *)ptr;
-	if (ser->type != CB_SERIAL_TYPE_IO_MAPPED)
-		return;
-	info->ser_ioport = ser->baseaddr;
+	info->serial = ser;
 }
 
-static void cb_parse_optiontable(unsigned char *ptr, struct sysinfo_t *info)
+static void cb_parse_vbnv(unsigned char *ptr, struct sysinfo_t *info)
 {
-	info->option_table = (struct cb_cmos_option_table *)ptr;
+	struct cb_vbnv *vbnv = (struct cb_vbnv *)ptr;
+
+	info->vbnv_start = vbnv->vbnv_start;
+	info->vbnv_size = vbnv->vbnv_size;
 }
 
-static void cb_parse_checksum(unsigned char *ptr, struct sysinfo_t *info)
+static void cb_parse_gpios(unsigned char *ptr, struct sysinfo_t *info)
 {
-	struct cb_cmos_checksum *cmos_cksum = (struct cb_cmos_checksum *)ptr;
-	info->cmos_range_start = cmos_cksum->range_start;
-	info->cmos_range_end = cmos_cksum->range_end;
-	info->cmos_checksum_location = cmos_cksum->location;
+	int i;
+	struct cb_gpios *gpios = (struct cb_gpios *)ptr;
+
+	info->num_gpios = (gpios->count < SYSINFO_MAX_GPIOS) ?
+				(gpios->count) : SYSINFO_MAX_GPIOS;
+
+	for (i = 0; i < info->num_gpios; i++)
+		info->gpios[i] = gpios->gpios[i];
+}
+
+static void cb_parse_vdat(unsigned char *ptr, struct sysinfo_t *info)
+{
+	struct cb_vdat *vdat = (struct cb_vdat *) ptr;
+
+	info->vdat_addr = vdat->vdat_addr;
+	info->vdat_size = vdat->vdat_size;
+}
+
+static void cb_parse_tstamp(unsigned char *ptr, struct sysinfo_t *info)
+{
+	info->tstamp_table = ((struct cb_cbmem_tab *)ptr)->cbmem_tab;
+}
+
+static void cb_parse_cbmem_cons(unsigned char *ptr, struct sysinfo_t *info)
+{
+	info->cbmem_cons = ((struct cb_cbmem_tab *)ptr)->cbmem_tab;
 }
 
 static void cb_parse_framebuffer(unsigned char *ptr, struct sysinfo_t *info)
@@ -95,6 +127,11 @@ static void cb_parse_framebuffer(unsigned char *ptr, struct sysinfo_t *info)
 	info->framebuffer = (struct cb_framebuffer *)ptr;
 }
 
+static void cb_parse_string(unsigned char *ptr, char **info)
+{
+	*info = (char *)((struct cb_string *)ptr)->string;
+}
+
 static int cb_parse_header(void *addr, int len, struct sysinfo_t *info)
 {
 	struct cb_header *header;
@@ -125,6 +162,9 @@ static int cb_parse_header(void *addr, int len, struct sysinfo_t *info)
 	/* Now, walk the tables. */
 	ptr += header->header_bytes;
 
+	/* Inintialize some fields to sentinel values. */
+	info->vbnv_start = info->vbnv_size = (uint32_t)(-1);
+
 	for (i = 0; i < header->table_entries; i++) {
 		struct cb_record *rec = (struct cb_record *)ptr;
 
@@ -142,11 +182,35 @@ static int cb_parse_header(void *addr, int len, struct sysinfo_t *info)
 		case CB_TAG_SERIAL:
 			cb_parse_serial(ptr, info);
 			break;
-		case CB_TAG_CMOS_OPTION_TABLE:
-			cb_parse_optiontable(ptr, info);
+		case CB_TAG_VERSION:
+			cb_parse_string(ptr, &info->version);
+			break;
+		case CB_TAG_EXTRA_VERSION:
+			cb_parse_string(ptr, &info->extra_version);
+			break;
+		case CB_TAG_BUILD:
+			cb_parse_string(ptr, &info->build);
+			break;
+		case CB_TAG_COMPILE_TIME:
+			cb_parse_string(ptr, &info->compile_time);
+			break;
+		case CB_TAG_COMPILE_BY:
+			cb_parse_string(ptr, &info->compile_by);
+			break;
+		case CB_TAG_COMPILE_HOST:
+			cb_parse_string(ptr, &info->compile_host);
+			break;
+		case CB_TAG_COMPILE_DOMAIN:
+			cb_parse_string(ptr, &info->compile_domain);
+			break;
+		case CB_TAG_COMPILER:
+			cb_parse_string(ptr, &info->compiler);
 			break;
-		case CB_TAG_OPTION_CHECKSUM:
-			cb_parse_checksum(ptr, info);
+		case CB_TAG_LINKER:
+			cb_parse_string(ptr, &info->linker);
+			break;
+		case CB_TAG_ASSEMBLER:
+			cb_parse_string(ptr, &info->assembler);
 			break;
 		/*
 		 * FIXME we should warn on serial if coreboot set up a
@@ -155,6 +219,21 @@ static int cb_parse_header(void *addr, int len, struct sysinfo_t *info)
 		case CB_TAG_FRAMEBUFFER:
 			cb_parse_framebuffer(ptr, info);
 			break;
+		case CB_TAG_GPIO:
+			cb_parse_gpios(ptr, info);
+			break;
+		case CB_TAG_VDAT:
+			cb_parse_vdat(ptr, info);
+			break;
+		case CB_TAG_TIMESTAMPS:
+			cb_parse_tstamp(ptr, info);
+			break;
+		case CB_TAG_CBMEM_CONSOLE:
+			cb_parse_cbmem_cons(ptr, info);
+			break;
+		case CB_TAG_VBNV:
+			cb_parse_vbnv(ptr, info);
+			break;
 		}
 
 		ptr += rec->size;
@@ -166,18 +245,12 @@ static int cb_parse_header(void *addr, int len, struct sysinfo_t *info)
 /* == Architecture specific == */
 /* This is the x86 specific stuff. */
 
-/* Assume no translation or that memory is identity mapped. */
-static void *phys_to_virt(unsigned long virt)
-{
-	return (void *)(uintptr_t)virt;
-}
-
 int get_coreboot_info(struct sysinfo_t *info)
 {
-	int ret = cb_parse_header(phys_to_virt(0x00000000), 0x1000, info);
+	int ret = cb_parse_header((void *)0x00000000, 0x1000, info);
 
 	if (ret != 1)
-		ret = cb_parse_header(phys_to_virt(0x000f0000), 0x1000, info);
+		ret = cb_parse_header((void *)0x000f0000, 0x1000, info);
 
 	return (ret == 1) ? 0 : -1;
 }

arch/x86/cpu/coreboot/timestamp.c

@@ -0,0 +1,61 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 The ChromiumOS Authors.  All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA, 02110-1301 USA
+ */
+
+#include <common.h>
+#include <asm/arch/timestamp.h>
+#include <asm/arch/sysinfo.h>
+#include <linux/compiler.h>
+
+struct timestamp_entry {
+	uint32_t	entry_id;
+	uint64_t	entry_stamp;
+} __packed;
+
+struct timestamp_table {
+	uint64_t	base_time;
+	uint32_t	max_entries;
+	uint32_t	num_entries;
+	struct timestamp_entry entries[0]; /* Variable number of entries */
+} __packed;
+
+static struct timestamp_table *ts_table  __attribute__((section(".data")));
+
+void timestamp_init(void)
+{
+	ts_table = lib_sysinfo.tstamp_table;
+	timer_set_tsc_base(ts_table->base_time);
+	timestamp_add_now(TS_U_BOOT_INITTED);
+}
+
+void timestamp_add(enum timestamp_id id, uint64_t ts_time)
+{
+	struct timestamp_entry *tse;
+
+	if (!ts_table || (ts_table->num_entries == ts_table->max_entries))
+		return;
+
+	tse = &ts_table->entries[ts_table->num_entries++];
+	tse->entry_id = id;
+	tse->entry_stamp = ts_time - ts_table->base_time;
+}
+
+void timestamp_add_now(enum timestamp_id id)
+{
+	timestamp_add(id, rdtsc());
+}

arch/x86/cpu/cpu.c

@@ -34,6 +34,7 @@
 
 #include <common.h>
 #include <command.h>
+#include <asm/control_regs.h>
 #include <asm/processor.h>
 #include <asm/processor-flags.h>
 #include <asm/interrupt.h>
@@ -90,12 +91,6 @@ static void load_gdt(const u64 *boot_gdt, u16 num_entries)
 	asm volatile("lgdtl %0\n" : : "m" (gdt));
 }
 
-void init_gd(gd_t *id, u64 *gdt_addr)
-{
-	id->gd_addr = (ulong)id;
-	setup_gdt(id, gdt_addr);
-}
-
 void setup_gdt(gd_t *id, u64 *gdt_addr)
 {
 	/* CS: code, read/execute, 4 GB, base 0 */
@@ -121,6 +116,11 @@ void setup_gdt(gd_t *id, u64 *gdt_addr)
 	load_fs(X86_GDT_ENTRY_32BIT_FS);
 }
 
+int __weak x86_cleanup_before_linux(void)
+{
+	return 0;
+}
+
 int x86_cpu_init_f(void)
 {
 	const u32 em_rst = ~X86_CR0_EM;
@@ -148,16 +148,27 @@ int cpu_init_r(void) __attribute__((weak, alias("x86_cpu_init_r")));
 
 void x86_enable_caches(void)
 {
-	const u32 nw_cd_rst = ~(X86_CR0_NW | X86_CR0_CD);
+	unsigned long cr0;
 
-	/* turn on the cache and disable write through */
-	asm("movl	%%cr0, %%eax\n"
-	    "andl	%0, %%eax\n"
-	    "movl	%%eax, %%cr0\n"
-	    "wbinvd\n" : : "i" (nw_cd_rst) : "eax");
+	cr0 = read_cr0();
+	cr0 &= ~(X86_CR0_NW | X86_CR0_CD);
+	write_cr0(cr0);
+	wbinvd();
 }
 void enable_caches(void) __attribute__((weak, alias("x86_enable_caches")));
 
+void x86_disable_caches(void)
+{
+	unsigned long cr0;
+
+	cr0 = read_cr0();
+	cr0 |= X86_CR0_NW | X86_CR0_CD;
+	wbinvd();
+	write_cr0(cr0);
+	wbinvd();
+}
+void disable_caches(void) __attribute__((weak, alias("x86_disable_caches")));
+
 int x86_init_cache(void)
 {
 	enable_caches();
@@ -201,3 +212,17 @@ void __reset_cpu(ulong addr)
 	generate_gpf();			/* start the show */
 }
 void reset_cpu(ulong addr) __attribute__((weak, alias("__reset_cpu")));
+
+int dcache_status(void)
+{
+	return !(read_cr0() & 0x40000000);
+}
+
+/* Define these functions to allow ehch-hcd to function */
+void flush_dcache_range(unsigned long start, unsigned long stop)
+{
+}
+
+void invalidate_dcache_range(unsigned long start, unsigned long stop)
+{
+}

arch/x86/cpu/interrupts.c

@@ -28,10 +28,14 @@
  */
 
 #include <common.h>
+#include <asm/cache.h>
+#include <asm/control_regs.h>
 #include <asm/interrupt.h>
 #include <asm/io.h>
 #include <asm/processor-flags.h>
 #include <linux/compiler.h>
+#include <asm/msr.h>
+#include <asm/u-boot-x86.h>
 
 #define DECLARE_INTERRUPT(x) \
 	".globl irq_"#x"\n" \
@@ -41,72 +45,6 @@
 	"pushl $"#x"\n" \
 	"jmp irq_common_entry\n"
 
-/*
- * Volatile isn't enough to prevent the compiler from reordering the
- * read/write functions for the control registers and messing everything up.
- * A memory clobber would solve the problem, but would prevent reordering of
- * all loads stores around it, which can hurt performance. Solution is to
- * use a variable and mimic reads and writes to it to enforce serialisation
- */
-static unsigned long __force_order;
-
-static inline unsigned long read_cr0(void)
-{
-	unsigned long val;
-	asm volatile("mov %%cr0,%0\n\t" : "=r" (val), "=m" (__force_order));
-	return val;
-}
-
-static inline unsigned long read_cr2(void)
-{
-	unsigned long val;
-	asm volatile("mov %%cr2,%0\n\t" : "=r" (val), "=m" (__force_order));
-	return val;
-}
-
-static inline unsigned long read_cr3(void)
-{
-	unsigned long val;
-	asm volatile("mov %%cr3,%0\n\t" : "=r" (val), "=m" (__force_order));
-	return val;
-}
-
-static inline unsigned long read_cr4(void)
-{
-	unsigned long val;
-	asm volatile("mov %%cr4,%0\n\t" : "=r" (val), "=m" (__force_order));
-	return val;
-}
-
-static inline unsigned long get_debugreg(int regno)
-{
-	unsigned long val = 0;	/* Damn you, gcc! */
-
-	switch (regno) {
-	case 0:
-		asm("mov %%db0, %0" : "=r" (val));
-		break;
-	case 1:
-		asm("mov %%db1, %0" : "=r" (val));
-		break;
-	case 2:
-		asm("mov %%db2, %0" : "=r" (val));
-		break;
-	case 3:
-		asm("mov %%db3, %0" : "=r" (val));
-		break;
-	case 6:
-		asm("mov %%db6, %0" : "=r" (val));
-		break;
-	case 7:
-		asm("mov %%db7, %0" : "=r" (val));
-		break;
-	default:
-		val = 0;
-	}
-	return val;
-}
-
 void dump_regs(struct irq_regs *regs)
 {
 	unsigned long cr0 = 0L, cr2 = 0L, cr3 = 0L, cr4 = 0L;
@@ -679,3 +617,32 @@ asm(".globl irq_common_entry\n" \
 	DECLARE_INTERRUPT(253) \
 	DECLARE_INTERRUPT(254) \
 	DECLARE_INTERRUPT(255));
+
+#if defined(CONFIG_INTEL_CORE_ARCH)
+/*
+ * Get the number of CPU time counter ticks since it was read first time after
+ * restart. This yields a free running counter guaranteed to take almost 6
+ * years to wrap around even at 100GHz clock rate.
+ */
+u64 get_ticks(void)
+{
+	static u64 tick_base;
+	u64 now_tick = rdtsc();
+
+	if (!tick_base)
+		tick_base = now_tick;
+
+	return now_tick - tick_base;
+}
+
+#define PLATFORM_INFO_MSR 0xce
+
+unsigned long get_tbclk(void)
+{
+	u32 ratio;
+	u64 platform_info = native_read_msr(PLATFORM_INFO_MSR);
+
+	ratio = (platform_info >> 8) & 0xff;
+	return 100 * 1000 * 1000 * ratio; /* 100MHz times Max Non Turbo ratio */
+}
+#endif

arch/x86/cpu/start.S

@@ -55,8 +55,16 @@ _x86boot_start:
 	movl	%eax, %cr0
 	wbinvd
 
+	/* Tell 32-bit code it is being entered from an in-RAM copy */
+	movw	$GD_FLG_WARM_BOOT, %bx
+	jmp	1f
 _start:
-	/* This is the 32-bit cold-reset entry point */
+	/*
+	 * This is the 32-bit cold-reset entry point. Initialize %bx to 0
+	 * in case we're preceeded by some sort of boot stub.
+	 */
+	movw	$GD_FLG_COLD_BOOT, %bx
+1:
 
 	/* Load the segement registes to match the gdt loaded in start16.S */
 	movl	$(X86_GDT_ENTRY_32BIT_DS * X86_GDT_ENTRY_SIZE), %eax
@@ -83,13 +91,33 @@ car_init_ret:
 	 * or fully initialised SDRAM - we really don't care which)
 	 * starting at CONFIG_SYS_CAR_ADDR to be used as a temporary stack
 	 */
-	movl	$CONFIG_SYS_INIT_SP_ADDR, %esp
 
-	/* Initialise the Global Data Pointer */
-	movl	$CONFIG_SYS_INIT_GD_ADDR, %eax
-	movl	%eax, %edx
-	addl	$GENERATED_GBL_DATA_SIZE, %edx
-	call	init_gd;
+	/* Stack grows down from top of CAR */
+	movl	$(CONFIG_SYS_CAR_ADDR + CONFIG_SYS_CAR_SIZE), %esp
+
+	/* Reserve space on stack for global data */
+	subl	$GENERATED_GBL_DATA_SIZE, %esp
+
+	/* Align global data to 16-byte boundary */
+	andl	$0xfffffff0, %esp
+
+	/* Setup first parameter to setup_gdt */
+	movl	%esp, %eax
+
+	/* Reserve space for global descriptor table */
+	subl	$X86_GDT_SIZE, %esp
+
+	/* Align temporary global descriptor table to 16-byte boundary */
+	andl	$0xfffffff0, %esp
+
+	/* Set second parameter to setup_gdt */
+	movl	%esp, %edx
+
+	/* gd->gd_addr = gd (Required to allow gd->xyz to work) */
+	movl	%eax, (%eax)
+
+	/* Setup global descriptor table so gd->xyz works */
+	call	setup_gdt
 
 	/* Set parameter to board_init_f() to boot flags */
 	xorl	%eax, %eax
@@ -113,9 +141,42 @@ board_init_f_r_trampoline:
 	 * %eax = Address of top of new stack
 	 */
 
-	/* Setup stack in RAM */
+	/* Stack grows down from top of SDRAM */
 	movl	%eax, %esp
 
+	/* Reserve space on stack for global data */
+	subl	$GENERATED_GBL_DATA_SIZE, %esp
+
+	/* Align global data to 16-byte boundary */
+	andl	$0xfffffff0, %esp
+
+	/* Setup first parameter to memcpy (and setup_gdt) */
+	movl	%esp, %eax
+
+	/* Setup second parameter to memcpy */
+	fs movl 0, %edx
+
+	/* Set third parameter to memcpy */
+	movl	$GENERATED_GBL_DATA_SIZE, %ecx
+
+	/* Copy global data from CAR to SDRAM stack */
+	call	memcpy
+
+	/* Reserve space for global descriptor table */
+	subl	$X86_GDT_SIZE, %esp
+
+	/* Align global descriptor table to 16-byte boundary */
+	andl	$0xfffffff0, %esp
+
+	/* Set second parameter to setup_gdt */
+	movl	%esp, %edx
+
+	/* gd->gd_addr = gd (Required to allow gd->xyz to work) */
+	movl	%eax, (%eax)
+
+	/* Setup global descriptor table so gd->xyz works */
+	call	setup_gdt
+
 	/* Re-enter U-Boot by calling board_init_f_r */
 	call	board_init_f_r
 

arch/x86/cpu/start16.S

@@ -37,6 +37,9 @@
 .code16
 .globl start16
 start16:
+	/* Set the Cold Boot / Hard Reset flag */
+	movl	$GD_FLG_COLD_BOOT, %ebx
+
 	/*
 	 * First we let the BSP do some early initialization
 	 * this code have to map the flash to its final position

arch/x86/cpu/timer.c

@@ -0,0 +1,17 @@
+/*
+ * Copyright (c) 2011 The Chromium OS Authors. All rights reserved.
+ * Use of this source code is governed by a BSD-style license that can be
+ * found in the LICENSE file.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ */
+
+#include <common.h>
+
+unsigned long timer_get_us(void)
+{
+	printf("timer_get_us used but not implemented.\n");
+	return 0;
+}

arch/x86/cpu/u-boot.lds

@@ -86,6 +86,8 @@ SECTIONS
 	__bios_start = LOADADDR(.bios);
 	__bios_size = SIZEOF(.bios);
 
+#ifndef CONFIG_X86_NO_RESET_VECTOR
+
 	/*
 	 * The following expressions place the 16-bit Real-Mode code and
 	 * Reset Vector at the end of the Flash ROM
@@ -95,4 +97,5 @@ SECTIONS
 
 	. = RESET_VEC_LOC;
 	.resetvec : AT (CONFIG_SYS_TEXT_BASE + (CONFIG_SYS_MONITOR_LEN - RESET_SEG_SIZE + RESET_VEC_LOC)) { KEEP(*(.resetvec)); }
+#endif
 }

arch/x86/dts/coreboot.dtsi

@@ -0,0 +1,16 @@
+/include/ "skeleton.dtsi"
+
+/ {
+	aliases {
+		console = "/serial";
+	};
+
+	serial {
+		compatible = "ns16550";
+		reg-shift = <1>;
+		io-mapped = <1>;
+		multiplier = <1>;
+		baudrate = <115200>;
+		status = "disabled";
+	};
+};

arch/x86/dts/skeleton.dtsi

@@ -0,0 +1,13 @@
+/*
+ * Skeleton device tree; the bare minimum needed to boot; just include and
+ * add a compatible value.  The bootloader will typically populate the memory
+ * node.
+ */
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	chosen { };
+	aliases { };
+	memory { device_type = "memory"; reg = <0 0>; };
+};

arch/x86/include/asm/arch-coreboot/sysinfo.h

@@ -30,32 +30,52 @@
 #ifndef _COREBOOT_SYSINFO_H
 #define _COREBOOT_SYSINFO_H
 
+#include <common.h>
 #include <compiler.h>
+#include <fdt.h>
+#include <asm/arch/tables.h>
 
 /* Allow a maximum of 16 memory range definitions. */
 #define SYSINFO_MAX_MEM_RANGES 16
+/* Allow a maximum of 8 GPIOs */
+#define SYSINFO_MAX_GPIOS 8
 
 struct sysinfo_t {
-	unsigned int cpu_khz;
-	unsigned short ser_ioport;
-	unsigned long ser_base; /* for mmapped serial */
-
 	int n_memranges;
-
 	struct memrange {
 		unsigned long long base;
 		unsigned long long size;
 		unsigned int type;
 	} memrange[SYSINFO_MAX_MEM_RANGES];
 
-	struct cb_cmos_option_table *option_table;
 	u32 cmos_range_start;
 	u32 cmos_range_end;
 	u32 cmos_checksum_location;
+	u32 vbnv_start;
+	u32 vbnv_size;
+
+	char *version;
+	char *extra_version;
+	char *build;
+	char *compile_time;
+	char *compile_by;
+	char *compile_host;
+	char *compile_domain;
+	char *compiler;
+	char *linker;
+	char *assembler;
 
 	struct cb_framebuffer *framebuffer;
 
-	unsigned long *mbtable; /** Pointer to the multiboot table */
+	int num_gpios;
+	struct cb_gpio gpios[SYSINFO_MAX_GPIOS];
+
+	void	*vdat_addr;
+	u32	vdat_size;
+	void	*tstamp_table;
+	void	*cbmem_cons;
+
+	struct cb_serial *serial;
 };
 
 extern struct sysinfo_t lib_sysinfo;

arch/x86/include/asm/arch-coreboot/tables.h

@@ -164,6 +164,55 @@ struct cb_framebuffer {
 	u8 reserved_mask_size;
 };
 
+#define CB_TAG_GPIO 0x0013
+#define GPIO_MAX_NAME_LENGTH 16
+struct cb_gpio {
+	u32 port;
+	u32 polarity;
+	u32 value;
+	u8 name[GPIO_MAX_NAME_LENGTH];
+};
+
+struct cb_gpios {
+	u32 tag;
+	u32 size;
+
+	u32 count;
+	struct cb_gpio gpios[0];
+};
+
+#define CB_TAG_FDT	0x0014
+struct cb_fdt {
+	uint32_t tag;
+	uint32_t size;	/* size of the entire entry */
+	/* the actual FDT gets placed here */
+};
+
+#define CB_TAG_VDAT	0x0015
+struct cb_vdat {
+	uint32_t tag;
+	uint32_t size;	/* size of the entire entry */
+	void	 *vdat_addr;
+	uint32_t vdat_size;
+};
+
+#define CB_TAG_TIMESTAMPS	0x0016
+#define CB_TAG_CBMEM_CONSOLE	0x0017
+#define CB_TAG_MRC_CACHE	0x0018
+struct cb_cbmem_tab {
+	uint32_t tag;
+	uint32_t size;
+	void   *cbmem_tab;
+};
+
+#define CB_TAG_VBNV		0x0019
+struct cb_vbnv {
+	uint32_t tag;
+	uint32_t size;
+	uint32_t vbnv_start;
+	uint32_t vbnv_size;
+};
+
 #define CB_TAG_CMOS_OPTION_TABLE 0x00c8
 struct cb_cmos_option_table {
 	u32 tag;
@@ -238,4 +287,29 @@ struct sysinfo_t;
 
 int get_coreboot_info(struct sysinfo_t *info);
 
+#define CBMEM_TOC_RESERVED      512
+#define MAX_CBMEM_ENTRIES       16
+#define CBMEM_MAGIC             0x434f5245
+
+struct cbmem_entry {
+	u32 magic;
+	u32 id;
+	u64 base;
+	u64 size;
+} __packed;
+
+#define CBMEM_ID_FREESPACE      0x46524545
+#define CBMEM_ID_GDT            0x4c474454
+#define CBMEM_ID_ACPI           0x41435049
+#define CBMEM_ID_CBTABLE        0x43425442
+#define CBMEM_ID_PIRQ           0x49525154
+#define CBMEM_ID_MPTABLE        0x534d5054
+#define CBMEM_ID_RESUME         0x5245534d
+#define CBMEM_ID_RESUME_SCRATCH 0x52455343
+#define CBMEM_ID_SMBIOS         0x534d4254
+#define CBMEM_ID_TIMESTAMP      0x54494d45
+#define CBMEM_ID_MRCDATA        0x4d524344
+#define CBMEM_ID_CONSOLE        0x434f4e53
+#define CBMEM_ID_NONE           0x00000000
+
 #endif

arch/x86/include/asm/arch-coreboot/timestamp.h

@@ -0,0 +1,52 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 The ChromiumOS Authors.  All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA, 02110-1301 USA
+ */
+
+#ifndef __COREBOOT_TIMESTAMP_H__
+#define __COREBOOT_TIMESTAMP_H__
+
+enum timestamp_id {
+	/* coreboot specific timestamp IDs */
+	TS_START_ROMSTAGE = 1,
+	TS_BEFORE_INITRAM = 2,
+	TS_AFTER_INITRAM = 3,
+	TS_END_ROMSTAGE = 4,
+	TS_START_COPYRAM = 8,
+	TS_END_COPYRAM = 9,
+	TS_START_RAMSTAGE = 10,
+	TS_DEVICE_ENUMERATE = 30,
+	TS_DEVICE_CONFIGURE = 40,
+	TS_DEVICE_ENABLE = 50,
+	TS_DEVICE_INITIALIZE = 60,
+	TS_DEVICE_DONE = 70,
+	TS_CBMEM_POST = 75,
+	TS_WRITE_TABLES = 80,
+	TS_LOAD_PAYLOAD = 90,
+	TS_ACPI_WAKE_JUMP = 98,
+	TS_SELFBOOT_JUMP = 99,
+
+	/* U-Boot entry IDs start at 1000 */
+	TS_U_BOOT_INITTED = 1000, /* This is where u-boot starts */
+	TS_U_BOOT_START_KERNEL = 1100, /* Right before jumping to kernel. */
+};
+
+void timestamp_init(void);
+void timestamp_add(enum timestamp_id id, uint64_t ts_time);
+void timestamp_add_now(enum timestamp_id id);
+
+#endif

arch/x86/include/asm/bitops.h

@@ -351,6 +351,11 @@ static __inline__ int ffs(int x)
 }
 #define PLATFORM_FFS
 
+static inline int __ilog2(unsigned int x)
+{
+	return generic_fls(x) - 1;
+}
+
 /**
  * hweightN - returns the hamming weight of a N-bit word
  * @x: the word to weigh