Merge commit 'v2.6.29-rc4' into sched/core

.mailmap

@@ -92,6 +92,7 @@ Rudolf Marek <R.Marek@sh.cvut.cz>
 Rui Saraiva <rmps@joel.ist.utl.pt>
 Sachin P Sant <ssant@in.ibm.com>
 Sam Ravnborg <sam@mars.ravnborg.org>
+Sascha Hauer <s.hauer@pengutronix.de>
 S.Çağlar Onur <caglar@pardus.org.tr>
 Simon Kelley <simon@thekelleys.org.uk>
 Stéphane Witzmann <stephane.witzmann@ubpmes.univ-bpclermont.fr>
@@ -100,6 +101,7 @@ Tejun Heo <htejun@gmail.com>
 Thomas Graf <tgraf@suug.ch>
 Tony Luck <tony.luck@intel.com>
 Tsuneo Yoshioka <Tsuneo.Yoshioka@f-secure.com>
-Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
 Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de>
+Uwe Kleine-König <ukl@pengutronix.de>
+Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
 Valdis Kletnieks <Valdis.Kletnieks@vt.edu>

Documentation/cpu-freq/user-guide.txt

@@ -195,19 +195,3 @@ scaling_setspeed.		By "echoing" a new frequency into this
 				you can change the speed of the CPU,
 				but only within the limits of
 				scaling_min_freq and scaling_max_freq.
-				
-
-3.2 Deprecated Interfaces
--------------------------
-
-Depending on your kernel configuration, you might find the following 
-cpufreq-related files:
-/proc/cpufreq
-/proc/sys/cpu/*/speed
-/proc/sys/cpu/*/speed-min
-/proc/sys/cpu/*/speed-max
-
-These are files for deprecated interfaces to cpufreq, which offer far
-less functionality. Because of this, these interfaces aren't described
-here.
-

Documentation/filesystems/sysfs-pci.txt

@@ -9,6 +9,7 @@ that support it.  For example, a given bus might look like this:
      |   |-- class
      |   |-- config
      |   |-- device
+     |   |-- enable
      |   |-- irq
      |   |-- local_cpus
      |   |-- resource
@@ -32,6 +33,7 @@ files, each with their own function.
        class		   PCI class (ascii, ro)
        config		   PCI config space (binary, rw)
        device		   PCI device (ascii, ro)
+       enable	           Whether the device is enabled (ascii, rw)
        irq		   IRQ number (ascii, ro)
        local_cpus	   nearby CPU mask (cpumask, ro)
        resource		   PCI resource host addresses (ascii, ro)
@@ -57,10 +59,19 @@ used to do actual device programming from userspace.  Note that some platforms
 don't support mmapping of certain resources, so be sure to check the return
 value from any attempted mmap.
 
+The 'enable' file provides a counter that indicates how many times the device 
+has been enabled.  If the 'enable' file currently returns '4', and a '1' is
+echoed into it, it will then return '5'.  Echoing a '0' into it will decrease
+the count.  Even when it returns to 0, though, some of the initialisation
+may not be reversed.  
+
 The 'rom' file is special in that it provides read-only access to the device's
 ROM file, if available.  It's disabled by default, however, so applications
 should write the string "1" to the file to enable it before attempting a read
-call, and disable it following the access by writing "0" to the file.
+call, and disable it following the access by writing "0" to the file.  Note
+that the device must be enabled for a rom read to return data succesfully.
+In the event a driver is not bound to the device, it can be enabled using the
+'enable' file, documented above.
 
 Accessing legacy resources through sysfs
 ----------------------------------------

Documentation/filesystems/ubifs.txt

@@ -79,13 +79,6 @@ Mount options
 
 (*) == default.
 
-norm_unmount (*)	commit on unmount; the journal is committed
-			when the file-system is unmounted so that the
-			next mount does not have to replay the journal
-			and it becomes very fast;
-fast_unmount		do not commit on unmount; this option makes
-			unmount faster, but the next mount slower
-			because of the need to replay the journal.
 bulk_read		read more in one go to take advantage of flash
 			media that read faster sequentially
 no_bulk_read (*)	do not bulk-read

MAINTAINERS

@@ -911,7 +911,7 @@ S:	Maintained
 BLACKFIN ARCHITECTURE
 P:	Bryan Wu
 M:	cooloney@kernel.org
-L:	uclinux-dist-devel@blackfin.uclinux.org (subscribers-only)
+L:	uclinux-dist-devel@blackfin.uclinux.org
 W:	http://blackfin.uclinux.org
 S:	Supported
 
@@ -1021,6 +1021,14 @@ M:	mb@bu3sch.de
 W:	http://bu3sch.de/btgpio.php
 S:	Maintained
 
+BTRFS FILE SYSTEM
+P:	Chris Mason
+M:	chris.mason@oracle.com
+L:	linux-btrfs@vger.kernel.org
+W:	http://btrfs.wiki.kernel.org/
+T:	git kernel.org:/pub/scm/linux/kernel/git/mason/btrfs-unstable.git
+S:	Maintained
+
 BTTV VIDEO4LINUX DRIVER
 P:	Mauro Carvalho Chehab
 M:	mchehab@infradead.org
@@ -2212,7 +2220,7 @@ P:	Sean Hefty
 M:	sean.hefty@intel.com
 P:	Hal Rosenstock
 M:	hal.rosenstock@gmail.com
-L:	general@lists.openfabrics.org
+L:	general@lists.openfabrics.org (moderated for non-subscribers)
 W:	http://www.openib.org/
 T:	git kernel.org:/pub/scm/linux/kernel/git/roland/infiniband.git
 S:	Supported
@@ -4841,6 +4849,7 @@ P:	Ingo Molnar
 M:	mingo@redhat.com
 P:	H. Peter Anvin
 M:	hpa@zytor.com
+M:	x86@kernel.org
 L:	linux-kernel@vger.kernel.org
 T:	git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86.git
 S:	Maintained

Makefile

@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 29
-EXTRAVERSION = -rc3
+EXTRAVERSION = -rc4
 NAME = Erotic Pickled Herring
 
 # *DOCUMENTATION*

arch/alpha/include/asm/bug.h

@@ -8,12 +8,12 @@
 
 /* ??? Would be nice to use .gprel32 here, but we can't be sure that the
    function loaded the GP, so this could fail in modules.  */
-#define BUG()	{							\
+#define BUG()	do {							\
 	__asm__ __volatile__(						\
 		"call_pal %0  # bugchk\n\t"				\
 		".long %1\n\t.8byte %2"					\
 		: : "i"(PAL_bugchk), "i"(__LINE__), "i"(__FILE__));	\
-	for ( ; ; ); }
+	for ( ; ; ); } while (0)
 
 #define HAVE_ARCH_BUG
 #endif

arch/arm/kernel/entry-armv.S

@@ -650,6 +650,7 @@ ENTRY(fp_enter)
 no_fp:	mov	pc, lr
 
 __und_usr_unknown:
+	enable_irq
 	mov	r0, sp
 	adr	lr, ret_from_exception
 	b	do_undefinstr

arch/arm/kernel/entry-common.S

@@ -136,7 +136,7 @@ ENTRY(mcount)
 	ldmia sp!, {r0-r3, pc}
 
 trace:
-	ldr r1, [fp, #-4]
+	ldr r1, [fp, #-4]			@ lr of instrumented routine
 	mov r0, lr
 	sub r0, r0, #MCOUNT_INSN_SIZE
 	mov lr, pc

arch/arm/kernel/irq.c

@@ -101,7 +101,7 @@ unlock:
 /* Handle bad interrupts */
 static struct irq_desc bad_irq_desc = {
 	.handle_irq = handle_bad_irq,
-	.lock = SPIN_LOCK_UNLOCKED
+	.lock = __SPIN_LOCK_UNLOCKED(bad_irq_desc.lock),
 };
 
 /*

arch/arm/mach-msm/board-halibut.c

@@ -27,6 +27,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>
 
+#include <mach/irqs.h>
 #include <mach/board.h>
 #include <mach/msm_iomap.h>
 

arch/arm/mach-omap1/devices.c

@@ -181,7 +181,7 @@ void __init omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
 		}
 		size = OMAP1_MMC_SIZE;
 
-		omap_mmc_add(i, base, size, irq, mmc_data[i]);
+		omap_mmc_add("mmci-omap", i, base, size, irq, mmc_data[i]);
 	};
 }
 

arch/arm/mach-omap1/mcbsp.c

@@ -28,81 +28,8 @@
 #define DPS_RSTCT2_PER_EN	(1 << 0)
 #define DSP_RSTCT2_WD_PER_EN	(1 << 1)
 
-struct mcbsp_internal_clk {
-	struct clk clk;
-	struct clk **childs;
-	int n_childs;
-};
-
 #if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX)
-static void omap_mcbsp_clk_init(struct mcbsp_internal_clk *mclk)
-{
-	const char *clk_names[] = { "dsp_ck", "api_ck", "dspxor_ck" };
-	int i;
-
-	mclk->n_childs = ARRAY_SIZE(clk_names);
-	mclk->childs = kzalloc(mclk->n_childs * sizeof(struct clk *),
-				GFP_KERNEL);
-
-	for (i = 0; i < mclk->n_childs; i++) {
-		/* We fake a platform device to get correct device id */
-		struct platform_device pdev;
-
-		pdev.dev.bus = &platform_bus_type;
-		pdev.id = mclk->clk.id;
-		mclk->childs[i] = clk_get(&pdev.dev, clk_names[i]);
-		if (IS_ERR(mclk->childs[i]))
-			printk(KERN_ERR "Could not get clock %s (%d).\n",
-				clk_names[i], mclk->clk.id);
-	}
-}
-
-static int omap_mcbsp_clk_enable(struct clk *clk)
-{
-	struct mcbsp_internal_clk *mclk = container_of(clk,
-					struct mcbsp_internal_clk, clk);
-	int i;
-
-	for (i = 0; i < mclk->n_childs; i++)
-		clk_enable(mclk->childs[i]);
-	return 0;
-}
-
-static void omap_mcbsp_clk_disable(struct clk *clk)
-{
-	struct mcbsp_internal_clk *mclk = container_of(clk,
-					struct mcbsp_internal_clk, clk);
-	int i;
-
-	for (i = 0; i < mclk->n_childs; i++)
-		clk_disable(mclk->childs[i]);
-}
-
-static struct mcbsp_internal_clk omap_mcbsp_clks[] = {
-	{
-		.clk = {
-			.name 		= "mcbsp_clk",
-			.id		= 1,
-			.enable		= omap_mcbsp_clk_enable,
-			.disable	= omap_mcbsp_clk_disable,
-		},
-	},
-	{
-		.clk = {
-			.name 		= "mcbsp_clk",
-			.id		= 3,
-			.enable		= omap_mcbsp_clk_enable,
-			.disable	= omap_mcbsp_clk_disable,
-		},
-	},
-};
-
-#define omap_mcbsp_clks_size	ARRAY_SIZE(omap_mcbsp_clks)
-#else
-#define omap_mcbsp_clks_size	0
-static struct mcbsp_internal_clk __initdata *omap_mcbsp_clks;
-static inline void omap_mcbsp_clk_init(struct mcbsp_internal_clk *mclk)
-{ }
+const char *clk_names[] = { "dsp_ck", "api_ck", "dspxor_ck" };
 #endif
 
 static void omap1_mcbsp_request(unsigned int id)
@@ -167,8 +94,9 @@ static struct omap_mcbsp_platform_data omap15xx_mcbsp_pdata[] = {
 		.rx_irq		= INT_McBSP1RX,
 		.tx_irq		= INT_McBSP1TX,
 		.ops		= &omap1_mcbsp_ops,
-		.clk_name	= "mcbsp_clk",
-		},
+		.clk_names	= clk_names,
+		.num_clks	= 3,
+	},
 	{
 		.phys_base	= OMAP1510_MCBSP2_BASE,
 		.dma_rx_sync	= OMAP_DMA_MCBSP2_RX,
@@ -184,7 +112,8 @@ static struct omap_mcbsp_platform_data omap15xx_mcbsp_pdata[] = {
 		.rx_irq		= INT_McBSP3RX,
 		.tx_irq		= INT_McBSP3TX,
 		.ops		= &omap1_mcbsp_ops,
-		.clk_name	= "mcbsp_clk",
+		.clk_names	= clk_names,
+		.num_clks	= 3,
 	},
 };
 #define OMAP15XX_MCBSP_PDATA_SZ		ARRAY_SIZE(omap15xx_mcbsp_pdata)
@@ -202,7 +131,8 @@ static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = {
 		.rx_irq		= INT_McBSP1RX,
 		.tx_irq		= INT_McBSP1TX,
 		.ops		= &omap1_mcbsp_ops,
-		.clk_name	= "mcbsp_clk",
+		.clk_names	= clk_names,
+		.num_clks	= 3,
 	},
 	{
 		.phys_base	= OMAP1610_MCBSP2_BASE,
@@ -219,7 +149,8 @@ static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = {
 		.rx_irq		= INT_McBSP3RX,
 		.tx_irq		= INT_McBSP3TX,
 		.ops		= &omap1_mcbsp_ops,
-		.clk_name	= "mcbsp_clk",
+		.clk_names	= clk_names,
+		.num_clks	= 3,
 	},
 };
 #define OMAP16XX_MCBSP_PDATA_SZ		ARRAY_SIZE(omap16xx_mcbsp_pdata)
@@ -230,15 +161,6 @@ static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = {
 
 int __init omap1_mcbsp_init(void)
 {
-	int i;
-
-	for (i = 0; i < omap_mcbsp_clks_size; i++) {
-		if (cpu_is_omap15xx() || cpu_is_omap16xx()) {
-			omap_mcbsp_clk_init(&omap_mcbsp_clks[i]);
-			clk_register(&omap_mcbsp_clks[i].clk);
-		}
-	}
-
 	if (cpu_is_omap730())
 		omap_mcbsp_count = OMAP730_MCBSP_PDATA_SZ;
 	if (cpu_is_omap15xx())

arch/arm/mach-omap2/devices.c

@@ -421,6 +421,7 @@ void __init omap2_init_mmc(struct omap_mmc_platform_data **mmc_data,
 			int nr_controllers)
 {
 	int i;
+	char *name;
 
 	for (i = 0; i < nr_controllers; i++) {
 		unsigned long base, size;
@@ -450,12 +451,14 @@ void __init omap2_init_mmc(struct omap_mmc_platform_data **mmc_data,
 			continue;
 		}
 
-		if (cpu_is_omap2420())
+		if (cpu_is_omap2420()) {
 			size = OMAP2420_MMC_SIZE;
-		else
+			name = "mmci-omap";
+		} else {
 			size = HSMMC_SIZE;
-
-		omap_mmc_add(i, base, size, irq, mmc_data[i]);
+			name = "mmci-omap-hs";
+		}
+		omap_mmc_add(name, i, base, size, irq, mmc_data[i]);
 	};
 }
 

arch/arm/mach-omap2/id.c

@@ -172,9 +172,13 @@ void __init omap34xx_check_revision(void)
 			omap_revision = OMAP3430_REV_ES3_0;
 			rev_name = "ES3.0";
 			break;
+		case 4:
+			omap_revision = OMAP3430_REV_ES3_1;
+			rev_name = "ES3.1";
+			break;
 		default:
 			/* Use the latest known revision as default */
-			omap_revision = OMAP3430_REV_ES3_0;
+			omap_revision = OMAP3430_REV_ES3_1;
 			rev_name = "Unknown revision\n";
 		}
 	}

arch/arm/mach-omap2/irq.c

@@ -134,6 +134,7 @@ static struct irq_chip omap_irq_chip = {
 	.ack	= omap_mask_ack_irq,
 	.mask	= omap_mask_irq,
 	.unmask	= omap_unmask_irq,
+	.disable = omap_mask_irq,
 };
 
 static void __init omap_irq_bank_init_one(struct omap_irq_bank *bank)

arch/arm/mach-omap2/mcbsp.c

@@ -24,106 +24,7 @@
 #include <mach/cpu.h>
 #include <mach/mcbsp.h>
 
-struct mcbsp_internal_clk {
-	struct clk clk;
-	struct clk **childs;
-	int n_childs;
-};
-
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
-static void omap_mcbsp_clk_init(struct mcbsp_internal_clk *mclk)
-{
-	const char *clk_names[] = { "mcbsp_ick", "mcbsp_fck" };
-	int i;
-
-	mclk->n_childs = ARRAY_SIZE(clk_names);
-	mclk->childs = kzalloc(mclk->n_childs * sizeof(struct clk *),
-				GFP_KERNEL);
-
-	for (i = 0; i < mclk->n_childs; i++) {
-		/* We fake a platform device to get correct device id */
-		struct platform_device pdev;
-
-		pdev.dev.bus = &platform_bus_type;
-		pdev.id = mclk->clk.id;
-		mclk->childs[i] = clk_get(&pdev.dev, clk_names[i]);
-		if (IS_ERR(mclk->childs[i]))
-			printk(KERN_ERR "Could not get clock %s (%d).\n",
-				clk_names[i], mclk->clk.id);
-	}
-}
-
-static int omap_mcbsp_clk_enable(struct clk *clk)
-{
-	struct mcbsp_internal_clk *mclk = container_of(clk,
-					struct mcbsp_internal_clk, clk);
-	int i;
-
-	for (i = 0; i < mclk->n_childs; i++)
-		clk_enable(mclk->childs[i]);
-	return 0;
-}
-
-static void omap_mcbsp_clk_disable(struct clk *clk)
-{
-	struct mcbsp_internal_clk *mclk = container_of(clk,
-					struct mcbsp_internal_clk, clk);
-	int i;
-
-	for (i = 0; i < mclk->n_childs; i++)
-		clk_disable(mclk->childs[i]);
-}
-
-static struct mcbsp_internal_clk omap_mcbsp_clks[] = {
-	{
-		.clk = {
-			.name 		= "mcbsp_clk",
-			.id		= 1,
-			.enable		= omap_mcbsp_clk_enable,
-			.disable	= omap_mcbsp_clk_disable,
-		},
-	},
-	{
-		.clk = {
-			.name 		= "mcbsp_clk",
-			.id		= 2,
-			.enable		= omap_mcbsp_clk_enable,
-			.disable	= omap_mcbsp_clk_disable,
-		},
-	},
-	{
-		.clk = {
-			.name		= "mcbsp_clk",
-			.id		= 3,
-			.enable		= omap_mcbsp_clk_enable,
-			.disable	= omap_mcbsp_clk_disable,
-		},
-	},
-	{
-		.clk = {
-			.name		= "mcbsp_clk",
-			.id		= 4,
-			.enable		= omap_mcbsp_clk_enable,
-			.disable	= omap_mcbsp_clk_disable,
-		},
-	},
-	{
-		.clk = {
-			.name		= "mcbsp_clk",
-			.id		= 5,
-			.enable		= omap_mcbsp_clk_enable,
-			.disable	= omap_mcbsp_clk_disable,
-		},
-	},
-};
-
-#define omap_mcbsp_clks_size	ARRAY_SIZE(omap_mcbsp_clks)
-#else
-#define omap_mcbsp_clks_size	0
-static struct mcbsp_internal_clk __initdata *omap_mcbsp_clks;
-static inline void omap_mcbsp_clk_init(struct clk *clk)
-{ }
-#endif
+const char *clk_names[] = { "mcbsp_ick", "mcbsp_fck" };
 
 static void omap2_mcbsp2_mux_setup(void)
 {
@@ -156,7 +57,8 @@ static struct omap_mcbsp_platform_data omap2420_mcbsp_pdata[] = {
 		.rx_irq		= INT_24XX_MCBSP1_IRQ_RX,
 		.tx_irq		= INT_24XX_MCBSP1_IRQ_TX,
 		.ops		= &omap2_mcbsp_ops,
-		.clk_name	= "mcbsp_clk",
+		.clk_names	= clk_names,
+		.num_clks	= 2,
 	},
 	{
 		.phys_base	= OMAP24XX_MCBSP2_BASE,
@@ -165,7 +67,8 @@ static struct omap_mcbsp_platform_data omap2420_mcbsp_pdata[] = {
 		.rx_irq		= INT_24XX_MCBSP2_IRQ_RX,
 		.tx_irq		= INT_24XX_MCBSP2_IRQ_TX,
 		.ops		= &omap2_mcbsp_ops,
-		.clk_name	= "mcbsp_clk",
+		.clk_names	= clk_names,
+		.num_clks	= 2,
 	},
 };
 #define OMAP2420_MCBSP_PDATA_SZ		ARRAY_SIZE(omap2420_mcbsp_pdata)
@@ -183,7 +86,8 @@ static struct omap_mcbsp_platform_data omap2430_mcbsp_pdata[] = {
 		.rx_irq		= INT_24XX_MCBSP1_IRQ_RX,
 		.tx_irq		= INT_24XX_MCBSP1_IRQ_TX,
 		.ops		= &omap2_mcbsp_ops,
-		.clk_name	= "mcbsp_clk",
+		.clk_names	= clk_names,
+		.num_clks	= 2,
 	},
 	{
 		.phys_base	= OMAP24XX_MCBSP2_BASE,
@@ -192,7 +96,8 @@ static struct omap_mcbsp_platform_data omap2430_mcbsp_pdata[] = {
 		.rx_irq		= INT_24XX_MCBSP2_IRQ_RX,
 		.tx_irq		= INT_24XX_MCBSP2_IRQ_TX,
 		.ops		= &omap2_mcbsp_ops,
-		.clk_name	= "mcbsp_clk",
+		.clk_names	= clk_names,
+		.num_clks	= 2,
 	},
 	{
 		.phys_base	= OMAP2430_MCBSP3_BASE,
@@ -201,7 +106,8 @@ static struct omap_mcbsp_platform_data omap2430_mcbsp_pdata[] = {
 		.rx_irq		= INT_24XX_MCBSP3_IRQ_RX,
 		.tx_irq		= INT_24XX_MCBSP3_IRQ_TX,
 		.ops		= &omap2_mcbsp_ops,
-		.clk_name	= "mcbsp_clk",
+		.clk_names	= clk_names,
+		.num_clks	= 2,
 	},
 	{
 		.phys_base	= OMAP2430_MCBSP4_BASE,
@@ -210,7 +116,8 @@ static struct omap_mcbsp_platform_data omap2430_mcbsp_pdata[] = {
 		.rx_irq		= INT_24XX_MCBSP4_IRQ_RX,
 		.tx_irq		= INT_24XX_MCBSP4_IRQ_TX,
 		.ops		= &omap2_mcbsp_ops,
-		.clk_name	= "mcbsp_clk",
+		.clk_names	= clk_names,
+		.num_clks	= 2,
 	},
 	{
 		.phys_base	= OMAP2430_MCBSP5_BASE,
@@ -219,7 +126,8 @@ static struct omap_mcbsp_platform_data omap2430_mcbsp_pdata[] = {
 		.rx_irq		= INT_24XX_MCBSP5_IRQ_RX,
 		.tx_irq		= INT_24XX_MCBSP5_IRQ_TX,
 		.ops		= &omap2_mcbsp_ops,
-		.clk_name	= "mcbsp_clk",
+		.clk_names	= clk_names,
+		.num_clks	= 2,
 	},
 };
 #define OMAP2430_MCBSP_PDATA_SZ		ARRAY_SIZE(omap2430_mcbsp_pdata)
@@ -237,7 +145,8 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
 		.rx_irq		= INT_24XX_MCBSP1_IRQ_RX,
 		.tx_irq		= INT_24XX_MCBSP1_IRQ_TX,
 		.ops		= &omap2_mcbsp_ops,
-		.clk_name	= "mcbsp_clk",
+		.clk_names	= clk_names,
+		.num_clks	= 2,
 	},
 	{
 		.phys_base	= OMAP34XX_MCBSP2_BASE,
@@ -246,7 +155,8 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
 		.rx_irq		= INT_24XX_MCBSP2_IRQ_RX,
 		.tx_irq		= INT_24XX_MCBSP2_IRQ_TX,
 		.ops		= &omap2_mcbsp_ops,
-		.clk_name	= "mcbsp_clk",
+		.clk_names	= clk_names,
+		.num_clks	= 2,
 	},
 	{
 		.phys_base	= OMAP34XX_MCBSP3_BASE,
@@ -255,7 +165,8 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
 		.rx_irq		= INT_24XX_MCBSP3_IRQ_RX,
 		.tx_irq		= INT_24XX_MCBSP3_IRQ_TX,
 		.ops		= &omap2_mcbsp_ops,
-		.clk_name	= "mcbsp_clk",
+		.clk_names	= clk_names,
+		.num_clks	= 2,
 	},
 	{
 		.phys_base	= OMAP34XX_MCBSP4_BASE,
@@ -264,7 +175,8 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
 		.rx_irq		= INT_24XX_MCBSP4_IRQ_RX,
 		.tx_irq		= INT_24XX_MCBSP4_IRQ_TX,
 		.ops		= &omap2_mcbsp_ops,
-		.clk_name	= "mcbsp_clk",
+		.clk_names	= clk_names,
+		.num_clks	= 2,
 	},
 	{
 		.phys_base	= OMAP34XX_MCBSP5_BASE,
@@ -273,7 +185,8 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
 		.rx_irq		= INT_24XX_MCBSP5_IRQ_RX,
 		.tx_irq		= INT_24XX_MCBSP5_IRQ_TX,
 		.ops		= &omap2_mcbsp_ops,
-		.clk_name	= "mcbsp_clk",
+		.clk_names	= clk_names,
+		.num_clks	= 2,
 	},
 };
 #define OMAP34XX_MCBSP_PDATA_SZ		ARRAY_SIZE(omap34xx_mcbsp_pdata)
@@ -284,14 +197,6 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
 
 static int __init omap2_mcbsp_init(void)
 {
-	int i;
-
-	for (i = 0; i < omap_mcbsp_clks_size; i++) {
-		/* Once we call clk_get inside init, we do not register it */
-		omap_mcbsp_clk_init(&omap_mcbsp_clks[i]);
-		clk_register(&omap_mcbsp_clks[i].clk);
-	}
-
 	if (cpu_is_omap2420())
 		omap_mcbsp_count = OMAP2420_MCBSP_PDATA_SZ;
 	if (cpu_is_omap2430())

arch/arm/mach-omap2/sleep24xx.S

@@ -93,9 +93,8 @@ ENTRY(omap24xx_cpu_suspend)
 	orr	r4, r4, #0x40		@ enable self refresh on idle req
 	mov	r5, #0x2000		@ set delay (DPLL relock + DLL relock)
 	str	r4, [r2]		@ make it so
-	mov	r2, #0
 	nop
-	mcr	p15, 0, r2, c7, c0, 4	@ wait for interrupt
+	mcr	p15, 0, r3, c7, c0, 4	@ wait for interrupt
 	nop
 loop:
 	subs	r5, r5, #0x1		@ awake, wait just a bit

arch/arm/mach-omap2/timer-gp.c

@@ -118,7 +118,8 @@ static void __init omap2_gp_clockevent_init(void)
 	clockevent_gpt.max_delta_ns =
 		clockevent_delta2ns(0xffffffff, &clockevent_gpt);
 	clockevent_gpt.min_delta_ns =
-		clockevent_delta2ns(1, &clockevent_gpt);
+		clockevent_delta2ns(3, &clockevent_gpt);
+		/* Timer internal resynch latency. */
 
 	clockevent_gpt.cpumask = cpumask_of(0);
 	clockevents_register_device(&clockevent_gpt);

arch/arm/mach-sa1100/generic.c

@@ -289,7 +289,7 @@ static struct platform_device sa11x0pcmcia_device = {
 };
 
 static struct platform_device sa11x0mtd_device = {
-	.name		= "flash",
+	.name		= "sa1100-mtd",
 	.id		= -1,
 };
 

arch/arm/mm/fault-armv.c

@@ -66,7 +66,10 @@ static int adjust_pte(struct vm_area_struct *vma, unsigned long address)
 	 * fault (ie, is old), we can safely ignore any issues.
 	 */
 	if (ret && (pte_val(entry) & L_PTE_MT_MASK) != shared_pte_mask) {
-		flush_cache_page(vma, address, pte_pfn(entry));
+		unsigned long pfn = pte_pfn(entry);
+		flush_cache_page(vma, address, pfn);
+		outer_flush_range((pfn << PAGE_SHIFT),
+				  (pfn << PAGE_SHIFT) + PAGE_SIZE);
 		pte_val(entry) &= ~L_PTE_MT_MASK;
 		pte_val(entry) |= shared_pte_mask;
 		set_pte_at(vma->vm_mm, address, pte, entry);

arch/arm/plat-omap/devices.c

@@ -200,14 +200,15 @@ void omap_mcbsp_register_board_cfg(struct omap_mcbsp_platform_data *config,
 /*
  * Register MMC devices. Called from mach-omap1 and mach-omap2 device init.
  */
-int __init omap_mmc_add(int id, unsigned long base, unsigned long size,
-		unsigned int irq, struct omap_mmc_platform_data *data)
+int __init omap_mmc_add(const char *name, int id, unsigned long base,
+				unsigned long size, unsigned int irq,
+				struct omap_mmc_platform_data *data)
 {
 	struct platform_device *pdev;
 	struct resource res[OMAP_MMC_NR_RES];
 	int ret;
 
-	pdev = platform_device_alloc("mmci-omap", id);
+	pdev = platform_device_alloc(name, id);
 	if (!pdev)
 		return -ENOMEM;
 

arch/arm/plat-omap/dma.c

@@ -709,6 +709,7 @@ int omap_request_dma(int dev_id, const char *dev_name,
 	chan->dev_name = dev_name;
 	chan->callback = callback;
 	chan->data = data;
+	chan->flags = 0;
 
 #ifndef CONFIG_ARCH_OMAP1
 	if (cpu_class_is_omap2()) {
@@ -1888,11 +1889,11 @@ static int omap2_dma_handle_ch(int ch)
 		status = dma_read(CSR(ch));
 	}
 
+	dma_write(status, CSR(ch));
+
 	if (likely(dma_chan[ch].callback != NULL))
 		dma_chan[ch].callback(ch, status, dma_chan[ch].data);
 
-	dma_write(status, CSR(ch));
-
 	return 0;
 }
 

arch/arm/plat-omap/include/mach/cpu.h

@@ -339,6 +339,7 @@ IS_OMAP_TYPE(3430, 0x3430)
 #define OMAP3430_REV_ES2_0	0x34301034
 #define OMAP3430_REV_ES2_1	0x34302034
 #define OMAP3430_REV_ES3_0	0x34303034
+#define OMAP3430_REV_ES3_1	0x34304034
 
 /*
  * omap_chip bits

arch/arm/plat-omap/include/mach/mcbsp.h

@@ -344,7 +344,8 @@ struct omap_mcbsp_platform_data {
 	u8 dma_rx_sync, dma_tx_sync;
 	u16 rx_irq, tx_irq;
 	struct omap_mcbsp_ops *ops;
-	char const *clk_name;
+	char const **clk_names;
+	int num_clks;
 };
 
 struct omap_mcbsp {
@@ -376,7 +377,8 @@ struct omap_mcbsp {
 	/* Protect the field .free, while checking if the mcbsp is in use */
 	spinlock_t lock;
 	struct omap_mcbsp_platform_data *pdata;
-	struct clk *clk;
+	struct clk **clks;
+	int num_clks;
 };
 extern struct omap_mcbsp **mcbsp_ptr;
 extern int omap_mcbsp_count;

arch/arm/plat-omap/include/mach/mmc.h

@@ -115,8 +115,9 @@ void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
 				int nr_controllers);
 void omap2_init_mmc(struct omap_mmc_platform_data **mmc_data,
 				int nr_controllers);
-int omap_mmc_add(int id, unsigned long base, unsigned long size,
-			unsigned int irq, struct omap_mmc_platform_data *data);
+int omap_mmc_add(const char *name, int id, unsigned long base,
+				unsigned long size, unsigned int irq,
+				struct omap_mmc_platform_data *data);
 #else
 static inline void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
 				int nr_controllers)
@@ -126,8 +127,9 @@ static inline void omap2_init_mmc(struct omap_mmc_platform_data **mmc_data,
 				int nr_controllers)
 {
 }
-static inline int omap_mmc_add(int id, unsigned long base, unsigned long size,
-		unsigned int irq, struct omap_mmc_platform_data *data)
+static inline int omap_mmc_add(const char *name, int id, unsigned long base,
+				unsigned long size, unsigned int irq,
+				struct omap_mmc_platform_data *data)
 {
 	return 0;
 }

arch/arm/plat-omap/mcbsp.c

@@ -214,6 +214,7 @@ EXPORT_SYMBOL(omap_mcbsp_set_io_type);
 int omap_mcbsp_request(unsigned int id)
 {
 	struct omap_mcbsp *mcbsp;
+	int i;
 	int err;
 
 	if (!omap_mcbsp_check_valid_id(id)) {
@@ -225,7 +226,8 @@ int omap_mcbsp_request(unsigned int id)
 	if (mcbsp->pdata && mcbsp->pdata->ops && mcbsp->pdata->ops->request)
 		mcbsp->pdata->ops->request(id);
 
-	clk_enable(mcbsp->clk);
+	for (i = 0; i < mcbsp->num_clks; i++)
+		clk_enable(mcbsp->clks[i]);
 
 	spin_lock(&mcbsp->lock);
 	if (!mcbsp->free) {
@@ -276,6 +278,7 @@ EXPORT_SYMBOL(omap_mcbsp_request);
 void omap_mcbsp_free(unsigned int id)
 {
 	struct omap_mcbsp *mcbsp;
+	int i;
 
 	if (!omap_mcbsp_check_valid_id(id)) {
 		printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
@@ -286,7 +289,8 @@ void omap_mcbsp_free(unsigned int id)
 	if (mcbsp->pdata && mcbsp->pdata->ops && mcbsp->pdata->ops->free)
 		mcbsp->pdata->ops->free(id);
 
-	clk_disable(mcbsp->clk);
+	for (i = mcbsp->num_clks - 1; i >= 0; i--)
+		clk_disable(mcbsp->clks[i]);
 
 	spin_lock(&mcbsp->lock);
 	if (mcbsp->free) {
@@ -872,6 +876,7 @@ static int __devinit omap_mcbsp_probe(struct platform_device *pdev)
 	struct omap_mcbsp_platform_data *pdata = pdev->dev.platform_data;
 	struct omap_mcbsp *mcbsp;
 	int id = pdev->id - 1;
+	int i;
 	int ret = 0;
 
 	if (!pdata) {
@@ -916,14 +921,25 @@ static int __devinit omap_mcbsp_probe(struct platform_device *pdev)
 	mcbsp->dma_rx_sync = pdata->dma_rx_sync;
 	mcbsp->dma_tx_sync = pdata->dma_tx_sync;
 
-	if (pdata->clk_name)
-		mcbsp->clk = clk_get(&pdev->dev, pdata->clk_name);
-	if (IS_ERR(mcbsp->clk)) {
-		dev_err(&pdev->dev,
-			"Invalid clock configuration for McBSP%d.\n",
-			mcbsp->id);
-		ret = PTR_ERR(mcbsp->clk);
-		goto err_clk;
+	if (pdata->num_clks) {
+		mcbsp->num_clks = pdata->num_clks;
+		mcbsp->clks = kzalloc(mcbsp->num_clks * sizeof(struct clk *),
+					GFP_KERNEL);
+		if (!mcbsp->clks) {
+			ret = -ENOMEM;
+			goto exit;
+		}
+		for (i = 0; i < mcbsp->num_clks; i++) {
+			mcbsp->clks[i] = clk_get(&pdev->dev, pdata->clk_names[i]);
+			if (IS_ERR(mcbsp->clks[i])) {
+				dev_err(&pdev->dev,
+					"Invalid %s configuration for McBSP%d.\n",
+					pdata->clk_names[i], mcbsp->id);
+				ret = PTR_ERR(mcbsp->clks[i]);
+				goto err_clk;
+			}
+		}
+
 	}
 
 	mcbsp->pdata = pdata;
@@ -932,6 +948,9 @@ static int __devinit omap_mcbsp_probe(struct platform_device *pdev)
 	return 0;
 
 err_clk:
+	while (i--)
+		clk_put(mcbsp->clks[i]);
+	kfree(mcbsp->clks);
 	iounmap(mcbsp->io_base);
 err_ioremap:
 	mcbsp->free = 0;
@@ -942,6 +961,7 @@ exit:
 static int __devexit omap_mcbsp_remove(struct platform_device *pdev)
 {
 	struct omap_mcbsp *mcbsp = platform_get_drvdata(pdev);
+	int i;
 
 	platform_set_drvdata(pdev, NULL);
 	if (mcbsp) {
@@ -950,12 +970,18 @@ static int __devexit omap_mcbsp_remove(struct platform_device *pdev)
 				mcbsp->pdata->ops->free)
 			mcbsp->pdata->ops->free(mcbsp->id);
 
-		clk_disable(mcbsp->clk);
-		clk_put(mcbsp->clk);
+		for (i = mcbsp->num_clks - 1; i >= 0; i--) {
+			clk_disable(mcbsp->clks[i]);
+			clk_put(mcbsp->clks[i]);
+		}
 
 		iounmap(mcbsp->io_base);
 
-		mcbsp->clk = NULL;
+		if (mcbsp->num_clks) {
+			kfree(mcbsp->clks);
+			mcbsp->clks = NULL;
+			mcbsp->num_clks = 0;
+		}
 		mcbsp->free = 0;
 		mcbsp->dev = NULL;
 	}

arch/blackfin/Kconfig

@@ -169,26 +169,51 @@ config BF542
 	help
 	  BF542 Processor Support.
 
+config BF542M
+	bool "BF542m"
+	help
+	  BF542 Processor Support.
+
 config BF544
 	bool "BF544"
 	help
 	  BF544 Processor Support.
 
+config BF544M
+	bool "BF544m"
+	help
+	  BF544 Processor Support.
+
 config BF547
 	bool "BF547"
 	help
 	  BF547 Processor Support.
 
+config BF547M
+	bool "BF547m"
+	help
+	  BF547 Processor Support.
+
 config BF548
 	bool "BF548"
 	help
 	  BF548 Processor Support.
 
+config BF548M
+	bool "BF548m"
+	help
+	  BF548 Processor Support.
+
 config BF549
 	bool "BF549"
 	help
 	  BF549 Processor Support.
 
+config BF549M
+	bool "BF549m"
+	help
+	  BF549 Processor Support.
+
 config BF561
 	bool "BF561"
 	help
@@ -224,39 +249,39 @@ config TICK_SOURCE_SYSTMR0
 
 config BF_REV_MIN
 	int
-	default 0 if (BF51x || BF52x || BF54x)
+	default 0 if (BF51x || BF52x || (BF54x && !BF54xM))
 	default 2 if (BF537 || BF536 || BF534)
-	default 3 if (BF561 ||BF533 || BF532 || BF531)
+	default 3 if (BF561 || BF533 || BF532 || BF531 || BF54xM)
 	default 4 if (BF538 || BF539)
 
 config BF_REV_MAX
 	int
-	default 2 if (BF51x || BF52x || BF54x)
-	default 3 if (BF537 || BF536 || BF534)
+	default 2 if (BF51x || BF52x || (BF54x && !BF54xM))
+	default 3 if (BF537 || BF536 || BF534 || BF54xM)
 	default 5 if (BF561 || BF538 || BF539)
 	default 6 if (BF533 || BF532 || BF531)
 
 choice
 	prompt "Silicon Rev"
-	default BF_REV_0_1 if (BF51x || BF52x || BF54x)
+	default BF_REV_0_1 if (BF51x || BF52x || (BF54x && !BF54xM))
 	default BF_REV_0_2 if (BF534 || BF536 || BF537)
-	default BF_REV_0_3 if (BF531 || BF532 || BF533 || BF561)
+	default BF_REV_0_3 if (BF531 || BF532 || BF533 || BF54xM || BF561)
 
 config BF_REV_0_0
 	bool "0.0"
-	depends on (BF51x || BF52x || BF54x)
+	depends on (BF51x || BF52x || (BF54x && !BF54xM))
 
 config BF_REV_0_1
 	bool "0.1"
-	depends on (BF52x || BF54x)
+	depends on (BF52x || (BF54x && !BF54xM))
 
 config BF_REV_0_2
 	bool "0.2"
-	depends on (BF52x || BF537 || BF536 || BF534 || BF54x)
+	depends on (BF52x || BF537 || BF536 || BF534 || (BF54x && !BF54xM))
 
 config BF_REV_0_3
 	bool "0.3"
-	depends on (BF561 || BF537 || BF536 || BF534 || BF533 || BF532 || BF531)
+	depends on (BF54xM || BF561 || BF537 || BF536 || BF534 || BF533 || BF532 || BF531)
 
 config BF_REV_0_4
 	bool "0.4"
@@ -293,9 +318,14 @@ config BF53x
 	depends on (BF531 || BF532 || BF533 || BF534 || BF536 || BF537)
 	default y
 
+config BF54xM
+	bool
+	depends on (BF542M || BF544M || BF547M || BF548M || BF549M)
+	default y
+
 config BF54x
 	bool
-	depends on (BF542 || BF544 || BF547 || BF548 || BF549)
+	depends on (BF542 || BF544 || BF547 || BF548 || BF549 || BF54xM)
 	default y
 
 config MEM_GENERIC_BOARD

arch/blackfin/Makefile

@@ -21,57 +21,67 @@ KALLSYMS         += --symbol-prefix=_
 KBUILD_DEFCONFIG := BF537-STAMP_defconfig
 
 # setup the machine name and the machine dependent settings
-machine-$(CONFIG_BF512) := bf518
-machine-$(CONFIG_BF514) := bf518
-machine-$(CONFIG_BF516) := bf518
-machine-$(CONFIG_BF518) := bf518
-machine-$(CONFIG_BF522) := bf527
-machine-$(CONFIG_BF523) := bf527
-machine-$(CONFIG_BF524) := bf527
-machine-$(CONFIG_BF525) := bf527
-machine-$(CONFIG_BF526) := bf527
-machine-$(CONFIG_BF527) := bf527
-machine-$(CONFIG_BF531) := bf533
-machine-$(CONFIG_BF532) := bf533
-machine-$(CONFIG_BF533) := bf533
-machine-$(CONFIG_BF534) := bf537
-machine-$(CONFIG_BF536) := bf537
-machine-$(CONFIG_BF537) := bf537
-machine-$(CONFIG_BF538) := bf538
-machine-$(CONFIG_BF539) := bf538
-machine-$(CONFIG_BF542) := bf548
-machine-$(CONFIG_BF544) := bf548
-machine-$(CONFIG_BF547) := bf548
-machine-$(CONFIG_BF548) := bf548
-machine-$(CONFIG_BF549) := bf548
-machine-$(CONFIG_BF561) := bf561
+machine-$(CONFIG_BF512)  := bf518
+machine-$(CONFIG_BF514)  := bf518
+machine-$(CONFIG_BF516)  := bf518
+machine-$(CONFIG_BF518)  := bf518
+machine-$(CONFIG_BF522)  := bf527
+machine-$(CONFIG_BF523)  := bf527
+machine-$(CONFIG_BF524)  := bf527
+machine-$(CONFIG_BF525)  := bf527
+machine-$(CONFIG_BF526)  := bf527
+machine-$(CONFIG_BF527)  := bf527
+machine-$(CONFIG_BF531)  := bf533
+machine-$(CONFIG_BF532)  := bf533
+machine-$(CONFIG_BF533)  := bf533
+machine-$(CONFIG_BF534)  := bf537
+machine-$(CONFIG_BF536)  := bf537
+machine-$(CONFIG_BF537)  := bf537
+machine-$(CONFIG_BF538)  := bf538
+machine-$(CONFIG_BF539)  := bf538
+machine-$(CONFIG_BF542)  := bf548
+machine-$(CONFIG_BF542M) := bf548
+machine-$(CONFIG_BF544)  := bf548
+machine-$(CONFIG_BF544M) := bf548
+machine-$(CONFIG_BF547)  := bf548
+machine-$(CONFIG_BF547M) := bf548
+machine-$(CONFIG_BF548)  := bf548
+machine-$(CONFIG_BF548M) := bf548
+machine-$(CONFIG_BF549)  := bf548
+machine-$(CONFIG_BF549M) := bf548
+machine-$(CONFIG_BF561)  := bf561
 MACHINE := $(machine-y)
 export MACHINE
 
-cpu-$(CONFIG_BF512) := bf512
-cpu-$(CONFIG_BF514) := bf514
-cpu-$(CONFIG_BF516) := bf516
-cpu-$(CONFIG_BF518) := bf518
-cpu-$(CONFIG_BF522) := bf522
-cpu-$(CONFIG_BF523) := bf523
-cpu-$(CONFIG_BF524) := bf524
-cpu-$(CONFIG_BF525) := bf525
-cpu-$(CONFIG_BF526) := bf526
-cpu-$(CONFIG_BF527) := bf527
-cpu-$(CONFIG_BF531) := bf531
-cpu-$(CONFIG_BF532) := bf532
-cpu-$(CONFIG_BF533) := bf533
-cpu-$(CONFIG_BF534) := bf534
-cpu-$(CONFIG_BF536) := bf536
-cpu-$(CONFIG_BF537) := bf537
-cpu-$(CONFIG_BF538) := bf538
-cpu-$(CONFIG_BF539) := bf539
-cpu-$(CONFIG_BF542) := bf542
-cpu-$(CONFIG_BF544) := bf544
-cpu-$(CONFIG_BF547) := bf547
-cpu-$(CONFIG_BF548) := bf548
-cpu-$(CONFIG_BF549) := bf549
-cpu-$(CONFIG_BF561) := bf561
+cpu-$(CONFIG_BF512)  := bf512
+cpu-$(CONFIG_BF514)  := bf514
+cpu-$(CONFIG_BF516)  := bf516
+cpu-$(CONFIG_BF518)  := bf518
+cpu-$(CONFIG_BF522)  := bf522
+cpu-$(CONFIG_BF523)  := bf523
+cpu-$(CONFIG_BF524)  := bf524
+cpu-$(CONFIG_BF525)  := bf525
+cpu-$(CONFIG_BF526)  := bf526
+cpu-$(CONFIG_BF527)  := bf527
+cpu-$(CONFIG_BF531)  := bf531
+cpu-$(CONFIG_BF532)  := bf532
+cpu-$(CONFIG_BF533)  := bf533
+cpu-$(CONFIG_BF534)  := bf534
+cpu-$(CONFIG_BF536)  := bf536
+cpu-$(CONFIG_BF537)  := bf537
+cpu-$(CONFIG_BF538)  := bf538
+cpu-$(CONFIG_BF539)  := bf539
+cpu-$(CONFIG_BF542)  := bf542
+cpu-$(CONFIG_BF542M) := bf542m
+cpu-$(CONFIG_BF544)  := bf544
+cpu-$(CONFIG_BF544M) := bf544m
+cpu-$(CONFIG_BF547)  := bf547
+cpu-$(CONFIG_BF547M) := bf547m
+cpu-$(CONFIG_BF548)  := bf548
+cpu-$(CONFIG_BF548M) := bf548m
+cpu-$(CONFIG_BF549)  := bf549
+cpu-$(CONFIG_BF549M) := bf549m
+cpu-$(CONFIG_BF561)  := bf561
 
 rev-$(CONFIG_BF_REV_0_0)  := 0.0
 rev-$(CONFIG_BF_REV_0_1)  := 0.1

arch/blackfin/configs/BF518F-EZBRD_defconfig

@@ -1,6 +1,7 @@
 #
 # Automatically generated make config: don't edit
 # Linux kernel version: 2.6.28-rc2
+# Fri Jan  9 17:58:41 2009
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
@@ -149,6 +150,7 @@ CONFIG_BF_REV_0_0=y
 # CONFIG_BF_REV_ANY is not set
 # CONFIG_BF_REV_NONE is not set
 CONFIG_BF51x=y
+CONFIG_MEM_MT48LC32M8A2_75=y
 CONFIG_BFIN518F_EZBRD=y
 
 #
@@ -598,7 +600,10 @@ CONFIG_PHYLIB=y
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
-# CONFIG_BFIN_MAC is not set
+CONFIG_BFIN_MAC=y
+CONFIG_BFIN_TX_DESC_NUM=10
+CONFIG_BFIN_RX_DESC_NUM=20
+# CONFIG_BFIN_MAC_RMII is not set
 # CONFIG_SMC91X is not set
 # CONFIG_SMSC911X is not set
 # CONFIG_DM9000 is not set
@@ -679,7 +684,7 @@ CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_DEVKMEM is not set
-# CONFIG_BFIN_JTAG_COMM is not set
+CONFIG_BFIN_JTAG_COMM=m
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #

arch/blackfin/configs/BF526-EZBRD_defconfig

@@ -723,7 +723,7 @@ CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_DEVKMEM is not set
-# CONFIG_BFIN_JTAG_COMM is not set
+CONFIG_BFIN_JTAG_COMM=m
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #

arch/blackfin/configs/BF527-EZKIT_defconfig

@@ -767,7 +767,7 @@ CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_DEVKMEM is not set
-# CONFIG_BFIN_JTAG_COMM is not set
+CONFIG_BFIN_JTAG_COMM=m
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #

arch/blackfin/configs/BF533-EZKIT_defconfig

@@ -672,7 +672,7 @@ CONFIG_BFIN_DMA_INTERFACE=m
 CONFIG_SIMPLE_GPIO=m
 # CONFIG_VT is not set
 # CONFIG_DEVKMEM is not set
-# CONFIG_BFIN_JTAG_COMM is not set
+CONFIG_BFIN_JTAG_COMM=m
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #

arch/blackfin/configs/BF533-STAMP_defconfig

@@ -679,7 +679,7 @@ CONFIG_BFIN_DMA_INTERFACE=m
 CONFIG_SIMPLE_GPIO=m
 # CONFIG_VT is not set
 # CONFIG_DEVKMEM is not set
-# CONFIG_BFIN_JTAG_COMM is not set
+CONFIG_BFIN_JTAG_COMM=m
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #

arch/blackfin/configs/BF537-STAMP_defconfig

@@ -722,7 +722,7 @@ CONFIG_BFIN_DMA_INTERFACE=m
 CONFIG_SIMPLE_GPIO=m
 # CONFIG_VT is not set
 # CONFIG_DEVKMEM is not set
-# CONFIG_BFIN_JTAG_COMM is not set
+CONFIG_BFIN_JTAG_COMM=m
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #

arch/blackfin/configs/BF538-EZKIT_defconfig

@@ -726,7 +726,7 @@ CONFIG_BFIN_DMA_INTERFACE=m
 CONFIG_SIMPLE_GPIO=m
 # CONFIG_VT is not set
 # CONFIG_DEVKMEM is not set
-# CONFIG_BFIN_JTAG_COMM is not set
+CONFIG_BFIN_JTAG_COMM=m
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #

arch/blackfin/configs/BF548-EZKIT_defconfig

@@ -856,7 +856,7 @@ CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_DEVKMEM is not set
-# CONFIG_BFIN_JTAG_COMM is not set
+CONFIG_BFIN_JTAG_COMM=m
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #

arch/blackfin/configs/BF561-EZKIT_defconfig

@@ -709,7 +709,7 @@ CONFIG_BFIN_DMA_INTERFACE=m
 CONFIG_SIMPLE_GPIO=m
 # CONFIG_VT is not set
 # CONFIG_DEVKMEM is not set
-# CONFIG_BFIN_JTAG_COMM is not set
+CONFIG_BFIN_JTAG_COMM=m
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #

arch/blackfin/include/asm/checksum.h

@@ -63,23 +63,23 @@ static inline __wsum
 csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
 		   unsigned short proto, __wsum sum)
 {
-
-	__asm__ ("%0 = %0 + %1;\n\t"
-		 "CC = AC0;\n\t"
-		 "if !CC jump 4;\n\t"
-		 "%0 = %0 + %4;\n\t"
-		 "%0 = %0 + %2;\n\t"
-		 "CC = AC0;\n\t"
-                 "if !CC jump 4;\n\t"
-                 "%0 = %0 + %4;\n\t"
- 		 "%0 = %0 + %3;\n\t"
-		 "CC = AC0;\n\t"
-                 "if !CC jump 4;\n\t"
-                 "%0 = %0 + %4;\n\t"
-                 "NOP;\n\t"
- 		 : "=d" (sum)
-		 : "d" (daddr), "d" (saddr), "d" ((ntohs(len)<<16)+proto*256), "d" (1), "0"(sum)
-		 : "CC");
+	unsigned int carry;
+
+	__asm__ ("%0 = %0 + %2;\n\t"
+		"CC = AC0;\n\t"
+		"%1 = CC;\n\t"
+		"%0 = %0 + %1;\n\t"
+		"%0 = %0 + %3;\n\t"
+		"CC = AC0;\n\t"
+		"%1 = CC;\n\t"
+		"%0 = %0 + %1;\n\t"
+		"%0 = %0 + %4;\n\t"
+		"CC = AC0;\n\t"
+		"%1 = CC;\n\t"
+		"%0 = %0 + %1;\n\t"
+		: "=d" (sum), "=&d" (carry)
+		: "d" (daddr), "d" (saddr), "d" ((len + proto) << 8), "0"(sum)
+		: "CC");
 
 	return (sum);
 }

arch/blackfin/include/asm/delay.h

@@ -13,29 +13,7 @@
 
 static inline void __delay(unsigned long loops)
 {
-	if (ANOMALY_05000312) {
-		/* Interrupted loads to loop registers -> bad */
-		unsigned long tmp;
-		__asm__ __volatile__(
-			"[--SP] = LC0;"
-			"[--SP] = LT0;"
-			"[--SP] = LB0;"
-			"LSETUP (1f,1f) LC0 = %1;"
-			"1: NOP;"
-			/* We take advantage of the fact that LC0 is 0 at
-			 * the end of the loop.  Otherwise we'd need some
-			 * NOPs after the CLI here.
-			 */
-			"CLI %0;"
-			"LB0 = [SP++];"
-			"LT0 = [SP++];"
-			"LC0 = [SP++];"
-			"STI %0;"
-			: "=d" (tmp)
-			: "a" (loops)
-		);
-	} else
-		__asm__ __volatile__ (
+__asm__ __volatile__ (
 			"LSETUP(1f, 1f) LC0 = %0;"
 			"1: NOP;"
 			:
@@ -47,16 +25,15 @@ static inline void __delay(unsigned long loops)
 #include <linux/param.h>	/* needed for HZ */
 
 /*
- * Use only for very small delays ( < 1 msec).  Should probably use a
- * lookup table, really, as the multiplications take much too long with
- * short delays.  This is a "reasonable" implementation, though (and the
- * first constant multiplications gets optimized away if the delay is
- * a constant)
+ * close approximation borrowed from m68knommu to avoid 64-bit math
  */
+
+#define	HZSCALE		(268435456 / (1000000/HZ))
+
 static inline void udelay(unsigned long usecs)
 {
 	extern unsigned long loops_per_jiffy;
-	__delay(usecs * loops_per_jiffy / (1000000 / HZ));
+	__delay((((usecs * HZSCALE) >> 11) * (loops_per_jiffy >> 11)) >> 6);
 }
 
 #endif

arch/blackfin/include/asm/gpio.h

@@ -27,60 +27,6 @@
  * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
-/*
-*  Number     BF537/6/4    BF561    BF533/2/1
-*             BF527/5/2
-*
-*  GPIO_0       PF0         PF0        PF0
-*  GPIO_1       PF1         PF1        PF1
-*  GPIO_2       PF2         PF2        PF2
-*  GPIO_3       PF3         PF3        PF3
-*  GPIO_4       PF4         PF4        PF4
-*  GPIO_5       PF5         PF5        PF5
-*  GPIO_6       PF6         PF6        PF6
-*  GPIO_7       PF7         PF7        PF7
-*  GPIO_8       PF8         PF8        PF8
-*  GPIO_9       PF9         PF9        PF9
-*  GPIO_10      PF10        PF10       PF10
-*  GPIO_11      PF11        PF11       PF11
-*  GPIO_12      PF12        PF12       PF12
-*  GPIO_13      PF13        PF13       PF13
-*  GPIO_14      PF14        PF14       PF14
-*  GPIO_15      PF15        PF15       PF15
-*  GPIO_16      PG0         PF16
-*  GPIO_17      PG1         PF17
-*  GPIO_18      PG2         PF18
-*  GPIO_19      PG3         PF19
-*  GPIO_20      PG4         PF20
-*  GPIO_21      PG5         PF21
-*  GPIO_22      PG6         PF22
-*  GPIO_23      PG7         PF23
-*  GPIO_24      PG8         PF24
-*  GPIO_25      PG9         PF25
-*  GPIO_26      PG10        PF26
-*  GPIO_27      PG11        PF27
-*  GPIO_28      PG12        PF28
-*  GPIO_29      PG13        PF29
-*  GPIO_30      PG14        PF30
-*  GPIO_31      PG15        PF31
-*  GPIO_32      PH0         PF32
-*  GPIO_33      PH1         PF33
-*  GPIO_34      PH2         PF34
-*  GPIO_35      PH3         PF35
-*  GPIO_36      PH4         PF36
-*  GPIO_37      PH5         PF37
-*  GPIO_38      PH6         PF38
-*  GPIO_39      PH7         PF39
-*  GPIO_40      PH8         PF40
-*  GPIO_41      PH9         PF41
-*  GPIO_42      PH10        PF42
-*  GPIO_43      PH11        PF43
-*  GPIO_44      PH12        PF44
-*  GPIO_45      PH13        PF45
-*  GPIO_46      PH14        PF46
-*  GPIO_47      PH15        PF47
-*/
-
 #ifndef __ARCH_BLACKFIN_GPIO_H__
 #define __ARCH_BLACKFIN_GPIO_H__
 
@@ -295,10 +241,6 @@ int bfin_gpio_direction_output(unsigned gpio, int value);
 int bfin_gpio_get_value(unsigned gpio);
 void bfin_gpio_set_value(unsigned gpio, int value);
 
-#ifndef BF548_FAMILY
-#define bfin_gpio_set_value(gpio, value)    set_gpio_data(gpio, value)
-#endif
-
 #ifdef CONFIG_GPIOLIB
 #include <asm-generic/gpio.h>		/* cansleep wrappers */
 

arch/blackfin/include/asm/kgdb.h

@@ -1,32 +1,8 @@
-/*
- * File:         include/asm-blackfin/kgdb.h
- * Based on:
- * Author:       Sonic Zhang
- *
- * Created:
- * Description:
- *
- * Rev:          $Id: kgdb_bfin_linux-2.6.x.patch 4934 2007-02-13 09:32:11Z sonicz $
- *
- * Modified:
- *               Copyright 2005-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+/* Blackfin KGDB header
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * Copyright 2005-2009 Analog Devices Inc.
  *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #ifndef __ASM_BLACKFIN_KGDB_H__
@@ -37,17 +13,18 @@
 /* gdb locks */
 #define KGDB_MAX_NO_CPUS 8
 
-/************************************************************************/
-/* BUFMAX defines the maximum number of characters in inbound/outbound buffers*/
-/* at least NUMREGBYTES*2 are needed for register packets */
-/* Longer buffer is needed to list all threads */
+/*
+ * BUFMAX defines the maximum number of characters in inbound/outbound buffers.
+ * At least NUMREGBYTES*2 are needed for register packets.
+ * Longer buffer is needed to list all threads.
+ */
 #define BUFMAX 2048
 
 /*
- *  Note that this register image is different from
- *  the register image that Linux produces at interrupt time.
- *  
- *  Linux's register image is defined by struct pt_regs in ptrace.h.
+ * Note that this register image is different from
+ * the register image that Linux produces at interrupt time.
+ *
+ * Linux's register image is defined by struct pt_regs in ptrace.h.
  */
 enum regnames {
   /* Core Registers */
@@ -104,14 +81,14 @@ enum regnames {
   BFIN_RETX,
   BFIN_RETN,
   BFIN_RETE,
-  
+
   /* Pseudo Registers */
   BFIN_PC,
   BFIN_CC,
   BFIN_EXTRA1,		/* Address of .text section.  */
   BFIN_EXTRA2,		/* Address of .data section.  */
   BFIN_EXTRA3,		/* Address of .bss section.  */
-  BFIN_FDPIC_EXEC, 
+  BFIN_FDPIC_EXEC,
   BFIN_FDPIC_INTERP,
 
   /* MMRs */
@@ -126,7 +103,7 @@ enum regnames {
 
 static inline void arch_kgdb_breakpoint(void)
 {
-	asm("   EXCPT 2;");
+	asm("EXCPT 2;");
 }
 #define BREAK_INSTR_SIZE	2
 #define CACHE_FLUSH_IS_SAFE	1

arch/blackfin/include/asm/mem_init.h

@@ -115,7 +115,7 @@
 #define mem_SDRRC       (((CONFIG_SCLK_HZ / 1000) * SDRAM_Tref) / SDRAM_NRA) - (SDRAM_tRAS_num + SDRAM_tRP_num)
 
 /* Enable SCLK Out */
-#define mem_SDGCTL        (0x80000000 | SCTLE | SDRAM_CL | SDRAM_tRAS | SDRAM_tRP | SDRAM_tRCD | SDRAM_tWR | PSS)
+#define mem_SDGCTL        (SCTLE | SDRAM_CL | SDRAM_tRAS | SDRAM_tRP | SDRAM_tRCD | SDRAM_tWR | PSS)
 #else
 #define mem_SDRRC 	CONFIG_MEM_SDRRC
 #define mem_SDGCTL	CONFIG_MEM_SDGCTL

arch/blackfin/include/asm/pda.h

@@ -59,6 +59,7 @@ struct blackfin_pda {			/* Per-processor Data Area */
 	unsigned long icplb_fault_addr;
 	unsigned long retx;
 	unsigned long seqstat;
+	unsigned int __nmi_count;	/* number of times NMI asserted on this CPU */
 };
 
 extern struct blackfin_pda cpu_pda[];

arch/blackfin/include/asm/reboot.h

@@ -15,6 +15,6 @@ extern void native_machine_halt(void);
 extern void native_machine_power_off(void);
 
 /* common reboot workarounds */
-extern void bfin_gpio_reset_spi0_ssel1(void);
+extern void bfin_reset_boot_spi_cs(unsigned short pin);
 
 #endif

arch/blackfin/kernel/Makefile

@@ -15,6 +15,8 @@ else
     obj-y += time.o
 endif
 
+CFLAGS_kgdb_test.o := -mlong-calls -O0
+
 obj-$(CONFIG_IPIPE)                  += ipipe.o
 obj-$(CONFIG_IPIPE_TRACE_MCOUNT)     += mcount.o
 obj-$(CONFIG_BFIN_GPTIMERS)          += gptimers.o

arch/blackfin/kernel/bfin_dma_5xx.c

@@ -249,6 +249,13 @@ static void __dma_memcpy(u32 daddr, s16 dmod, u32 saddr, s16 smod, size_t cnt, u
 
 	spin_lock_irqsave(&mdma_lock, flags);
 
+	/* Force a sync in case a previous config reset on this channel
+	 * occurred.  This is needed so subsequent writes to DMA registers
+	 * are not spuriously lost/corrupted.  Do it under irq lock and
+	 * without the anomaly version (because we are atomic already).
+	 */
+	__builtin_bfin_ssync();
+
 	if (bfin_read_MDMA_S0_CONFIG())
 		while (!(bfin_read_MDMA_D0_IRQ_STATUS() & DMA_DONE))
 			continue;

arch/blackfin/kernel/bfin_gpio.c

@@ -27,59 +27,6 @@
  * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
-/*
-*  Number     BF537/6/4    BF561    BF533/2/1	   BF549/8/4/2
-*
-*  GPIO_0       PF0         PF0        PF0	   PA0...PJ13
-*  GPIO_1       PF1         PF1        PF1
-*  GPIO_2       PF2         PF2        PF2
-*  GPIO_3       PF3         PF3        PF3
-*  GPIO_4       PF4         PF4        PF4
-*  GPIO_5       PF5         PF5        PF5
-*  GPIO_6       PF6         PF6        PF6
-*  GPIO_7       PF7         PF7        PF7
-*  GPIO_8       PF8         PF8        PF8
-*  GPIO_9       PF9         PF9        PF9
-*  GPIO_10      PF10        PF10       PF10
-*  GPIO_11      PF11        PF11       PF11
-*  GPIO_12      PF12        PF12       PF12
-*  GPIO_13      PF13        PF13       PF13
-*  GPIO_14      PF14        PF14       PF14
-*  GPIO_15      PF15        PF15       PF15
-*  GPIO_16      PG0         PF16
-*  GPIO_17      PG1         PF17
-*  GPIO_18      PG2         PF18
-*  GPIO_19      PG3         PF19
-*  GPIO_20      PG4         PF20
-*  GPIO_21      PG5         PF21
-*  GPIO_22      PG6         PF22
-*  GPIO_23      PG7         PF23
-*  GPIO_24      PG8         PF24
-*  GPIO_25      PG9         PF25
-*  GPIO_26      PG10        PF26
-*  GPIO_27      PG11        PF27
-*  GPIO_28      PG12        PF28
-*  GPIO_29      PG13        PF29
-*  GPIO_30      PG14        PF30
-*  GPIO_31      PG15        PF31
-*  GPIO_32      PH0         PF32
-*  GPIO_33      PH1         PF33
-*  GPIO_34      PH2         PF34
-*  GPIO_35      PH3         PF35
-*  GPIO_36      PH4         PF36
-*  GPIO_37      PH5         PF37
-*  GPIO_38      PH6         PF38
-*  GPIO_39      PH7         PF39
-*  GPIO_40      PH8         PF40
-*  GPIO_41      PH9         PF41
-*  GPIO_42      PH10        PF42
-*  GPIO_43      PH11        PF43
-*  GPIO_44      PH12        PF44
-*  GPIO_45      PH13        PF45
-*  GPIO_46      PH14        PF46
-*  GPIO_47      PH15        PF47
-*/
-
 #include <linux/delay.h>
 #include <linux/module.h>
 #include <linux/err.h>
@@ -119,62 +66,61 @@ enum {
 #define AWA_DUMMY_READ(...)  do { } while (0)
 #endif
 
+static struct gpio_port_t * const gpio_array[] = {
 #if defined(BF533_FAMILY) || defined(BF538_FAMILY)
-static struct gpio_port_t *gpio_bankb[] = {
 	(struct gpio_port_t *) FIO_FLAG_D,
-};
-#endif
-
-#if defined(BF527_FAMILY) || defined(BF537_FAMILY) || defined(BF518_FAMILY)
-static struct gpio_port_t *gpio_bankb[] = {
+#elif defined(BF527_FAMILY) || defined(BF537_FAMILY) || defined(BF518_FAMILY)
 	(struct gpio_port_t *) PORTFIO,
 	(struct gpio_port_t *) PORTGIO,
 	(struct gpio_port_t *) PORTHIO,
+#elif defined(BF561_FAMILY)
+	(struct gpio_port_t *) FIO0_FLAG_D,
+	(struct gpio_port_t *) FIO1_FLAG_D,
+	(struct gpio_port_t *) FIO2_FLAG_D,
+#elif defined(BF548_FAMILY)
+	(struct gpio_port_t *)PORTA_FER,
+	(struct gpio_port_t *)PORTB_FER,
+	(struct gpio_port_t *)PORTC_FER,
+	(struct gpio_port_t *)PORTD_FER,
+	(struct gpio_port_t *)PORTE_FER,
+	(struct gpio_port_t *)PORTF_FER,
+	(struct gpio_port_t *)PORTG_FER,
+	(struct gpio_port_t *)PORTH_FER,
+	(struct gpio_port_t *)PORTI_FER,
+	(struct gpio_port_t *)PORTJ_FER,
+#else
+# error no gpio arrays defined
+#endif
 };
 
-static unsigned short *port_fer[] = {
+#if defined(BF527_FAMILY) || defined(BF537_FAMILY) || defined(BF518_FAMILY)
+static unsigned short * const port_fer[] = {
 	(unsigned short *) PORTF_FER,
 	(unsigned short *) PORTG_FER,
 	(unsigned short *) PORTH_FER,
 };
-#endif
 
-#if defined(BF527_FAMILY) || defined(BF518_FAMILY)
-static unsigned short *port_mux[] = {
+# if !defined(BF537_FAMILY)
+static unsigned short * const port_mux[] = {
 	(unsigned short *) PORTF_MUX,
 	(unsigned short *) PORTG_MUX,
 	(unsigned short *) PORTH_MUX,
 };
 
 static const
-u8 pmux_offset[][16] =
-	{{ 0, 0, 0, 0, 0, 0, 0, 0, 2, 2, 4, 6, 8, 8, 10, 10 }, /* PORTF */
-	 { 0, 0, 0, 0, 0, 2, 2, 4, 4, 6, 8, 10, 10, 10, 12, 12 }, /* PORTG */
-	 { 0, 0, 0, 0, 0, 0, 0, 0, 2, 4, 4, 4, 4, 4, 4, 4 }, /* PORTH */
-	};
-#endif
-
-#ifdef BF561_FAMILY
-static struct gpio_port_t *gpio_bankb[] = {
-	(struct gpio_port_t *) FIO0_FLAG_D,
-	(struct gpio_port_t *) FIO1_FLAG_D,
-	(struct gpio_port_t *) FIO2_FLAG_D,
+u8 pmux_offset[][16] = {
+#  if defined(BF527_FAMILY)
+	{ 0, 0, 0, 0, 0, 0, 0, 0, 2, 2, 4, 6, 8, 8, 10, 10 }, /* PORTF */
+	{ 0, 0, 0, 0, 0, 2, 2, 4, 4, 6, 8, 10, 10, 10, 12, 12 }, /* PORTG */
+	{ 0, 0, 0, 0, 0, 0, 0, 0, 2, 4, 4, 4, 4, 4, 4, 4 }, /* PORTH */
+#  elif defined(BF518_FAMILY)
+	{ 0, 2, 2, 2, 2, 2, 2, 4, 6, 6, 6, 8, 8, 8, 8, 10 }, /* PORTF */
+	{ 0, 0, 0, 2, 4, 6, 6, 6, 8, 10, 10, 12, 14, 14, 14, 14 }, /* PORTG */
+	{ 0, 0, 0, 0, 2, 2, 4, 6, 10, 10, 10, 10, 10, 10, 10, 10 }, /* PORTH */
+#  endif
 };
-#endif
+# endif
 
-#ifdef BF548_FAMILY
-static struct gpio_port_t *gpio_array[] = {
-	(struct gpio_port_t *)PORTA_FER,
-	(struct gpio_port_t *)PORTB_FER,
-	(struct gpio_port_t *)PORTC_FER,
-	(struct gpio_port_t *)PORTD_FER,
-	(struct gpio_port_t *)PORTE_FER,
-	(struct gpio_port_t *)PORTF_FER,
-	(struct gpio_port_t *)PORTG_FER,
-	(struct gpio_port_t *)PORTH_FER,
-	(struct gpio_port_t *)PORTI_FER,
-	(struct gpio_port_t *)PORTJ_FER,
-};
 #endif
 
 static unsigned short reserved_gpio_map[GPIO_BANK_NUM];
@@ -188,35 +134,9 @@ static struct str_ident {
 } str_ident[MAX_RESOURCES];
 
 #if defined(CONFIG_PM)
-#if defined(CONFIG_BF54x)
-static struct gpio_port_s gpio_bank_saved[GPIO_BANK_NUM];
-#else
-static unsigned short wakeup_map[GPIO_BANK_NUM];
-static unsigned char wakeup_flags_map[MAX_BLACKFIN_GPIOS];
 static struct gpio_port_s gpio_bank_saved[GPIO_BANK_NUM];
-
-#ifdef BF533_FAMILY
-static unsigned int sic_iwr_irqs[] = {IRQ_PROG_INTB};
-#endif
-
-#ifdef BF537_FAMILY
-static unsigned int sic_iwr_irqs[] = {IRQ_PROG_INTB, IRQ_PORTG_INTB, IRQ_MAC_TX};
-#endif
-
-#ifdef BF538_FAMILY
-static unsigned int sic_iwr_irqs[] = {IRQ_PORTF_INTB};
 #endif
 
-#if defined(BF527_FAMILY) || defined(BF518_FAMILY)
-static unsigned int sic_iwr_irqs[] = {IRQ_PORTF_INTB, IRQ_PORTG_INTB, IRQ_PORTH_INTB};
-#endif
-
-#ifdef BF561_FAMILY
-static unsigned int sic_iwr_irqs[] = {IRQ_PROG0_INTB, IRQ_PROG1_INTB, IRQ_PROG2_INTB};
-#endif
-#endif
-#endif /* CONFIG_PM */
-
 inline int check_gpio(unsigned gpio)
 {
 #if defined(BF548_FAMILY)
@@ -330,9 +250,10 @@ static struct {
 	{.res = P_SPI0_SSEL3, .offset = 0},
 };
 
-static void portmux_setup(unsigned short per, unsigned short function)
+static void portmux_setup(unsigned short per)
 {
 	u16 y, offset, muxreg;
+	u16 function = P_FUNCT2MUX(per);
 
 	for (y = 0; y < ARRAY_SIZE(port_mux_lut); y++) {
 		if (port_mux_lut[y].res == per) {
@@ -353,30 +274,33 @@ static void portmux_setup(unsigned short per, unsigned short function)
 	}
 }
 #elif defined(BF548_FAMILY)
-inline void portmux_setup(unsigned short portno, unsigned short function)
+inline void portmux_setup(unsigned short per)
 {
 	u32 pmux;
+	u16 ident = P_IDENT(per);
+	u16 function = P_FUNCT2MUX(per);
 
-	pmux = gpio_array[gpio_bank(portno)]->port_mux;
+	pmux = gpio_array[gpio_bank(ident)]->port_mux;
 
-	pmux &= ~(0x3 << (2 * gpio_sub_n(portno)));
-	pmux |= (function & 0x3) << (2 * gpio_sub_n(portno));
+	pmux &= ~(0x3 << (2 * gpio_sub_n(ident)));
+	pmux |= (function & 0x3) << (2 * gpio_sub_n(ident));
 
-	gpio_array[gpio_bank(portno)]->port_mux = pmux;
+	gpio_array[gpio_bank(ident)]->port_mux = pmux;
 }
 
-inline u16 get_portmux(unsigned short portno)
+inline u16 get_portmux(unsigned short per)
 {
 	u32 pmux;
+	u16 ident = P_IDENT(per);
 
-	pmux = gpio_array[gpio_bank(portno)]->port_mux;
+	pmux = gpio_array[gpio_bank(ident)]->port_mux;
 
-	return (pmux >> (2 * gpio_sub_n(portno)) & 0x3);
+	return (pmux >> (2 * gpio_sub_n(ident)) & 0x3);
 }
 #elif defined(BF527_FAMILY) || defined(BF518_FAMILY)
-inline void portmux_setup(unsigned short portno, unsigned short function)
+inline void portmux_setup(unsigned short per)
 {
-	u16 pmux, ident = P_IDENT(portno);
+	u16 pmux, ident = P_IDENT(per), function = P_FUNCT2MUX(per);
 	u8 offset = pmux_offset[gpio_bank(ident)][gpio_sub_n(ident)];
 
 	pmux = *port_mux[gpio_bank(ident)];
@@ -424,90 +348,71 @@ void set_gpio_ ## name(unsigned gpio, unsigned short arg) \
 	unsigned long flags; \
 	local_irq_save_hw(flags); \
 	if (arg) \
-		gpio_bankb[gpio_bank(gpio)]->name |= gpio_bit(gpio); \
+		gpio_array[gpio_bank(gpio)]->name |= gpio_bit(gpio); \
 	else \
-		gpio_bankb[gpio_bank(gpio)]->name &= ~gpio_bit(gpio); \
+		gpio_array[gpio_bank(gpio)]->name &= ~gpio_bit(gpio); \
 	AWA_DUMMY_READ(name); \
 	local_irq_restore_hw(flags); \
 } \
 EXPORT_SYMBOL(set_gpio_ ## name);
 
-SET_GPIO(dir)
-SET_GPIO(inen)
-SET_GPIO(polar)
-SET_GPIO(edge)
-SET_GPIO(both)
+SET_GPIO(dir)   /* set_gpio_dir() */
+SET_GPIO(inen)  /* set_gpio_inen() */
+SET_GPIO(polar) /* set_gpio_polar() */
+SET_GPIO(edge)  /* set_gpio_edge() */
+SET_GPIO(both)  /* set_gpio_both() */
 
 
-#if ANOMALY_05000311 || ANOMALY_05000323
 #define SET_GPIO_SC(name) \
 void set_gpio_ ## name(unsigned gpio, unsigned short arg) \
 { \
 	unsigned long flags; \
-	local_irq_save_hw(flags); \
-	if (arg) \
-		gpio_bankb[gpio_bank(gpio)]->name ## _set = gpio_bit(gpio); \
-	else \
-		gpio_bankb[gpio_bank(gpio)]->name ## _clear = gpio_bit(gpio); \
-	AWA_DUMMY_READ(name); \
-	local_irq_restore_hw(flags); \
-} \
-EXPORT_SYMBOL(set_gpio_ ## name);
-#else
-#define SET_GPIO_SC(name) \
-void set_gpio_ ## name(unsigned gpio, unsigned short arg) \
-{ \
+	if (ANOMALY_05000311 || ANOMALY_05000323) \
+		local_irq_save_hw(flags); \
 	if (arg) \
-		gpio_bankb[gpio_bank(gpio)]->name ## _set = gpio_bit(gpio); \
+		gpio_array[gpio_bank(gpio)]->name ## _set = gpio_bit(gpio); \
 	else \
-		gpio_bankb[gpio_bank(gpio)]->name ## _clear = gpio_bit(gpio); \
+		gpio_array[gpio_bank(gpio)]->name ## _clear = gpio_bit(gpio); \
+	if (ANOMALY_05000311 || ANOMALY_05000323) { \
+		AWA_DUMMY_READ(name); \
+		local_irq_restore_hw(flags); \
+	} \
 } \
 EXPORT_SYMBOL(set_gpio_ ## name);
-#endif
 
 SET_GPIO_SC(maska)
 SET_GPIO_SC(maskb)
 SET_GPIO_SC(data)
 
-#if ANOMALY_05000311 || ANOMALY_05000323
 void set_gpio_toggle(unsigned gpio)
 {
 	unsigned long flags;
-	local_irq_save_hw(flags);
-	gpio_bankb[gpio_bank(gpio)]->toggle = gpio_bit(gpio);
-	AWA_DUMMY_READ(toggle);
-	local_irq_restore_hw(flags);
-}
-#else
-void set_gpio_toggle(unsigned gpio)
-{
-	gpio_bankb[gpio_bank(gpio)]->toggle = gpio_bit(gpio);
+	if (ANOMALY_05000311 || ANOMALY_05000323)
+		local_irq_save_hw(flags);
+	gpio_array[gpio_bank(gpio)]->toggle = gpio_bit(gpio);
+	if (ANOMALY_05000311 || ANOMALY_05000323) {
+		AWA_DUMMY_READ(toggle);
+		local_irq_restore_hw(flags);
+	}
 }
-#endif
 EXPORT_SYMBOL(set_gpio_toggle);
 
 
 /*Set current PORT date (16-bit word)*/
 
-#if ANOMALY_05000311 || ANOMALY_05000323
 #define SET_GPIO_P(name) \
 void set_gpiop_ ## name(unsigned gpio, unsigned short arg) \
 { \
 	unsigned long flags; \
-	local_irq_save_hw(flags); \
-	gpio_bankb[gpio_bank(gpio)]->name = arg; \
-	AWA_DUMMY_READ(name); \
-	local_irq_restore_hw(flags); \
+	if (ANOMALY_05000311 || ANOMALY_05000323) \
+		local_irq_save_hw(flags); \
+	gpio_array[gpio_bank(gpio)]->name = arg; \
+	if (ANOMALY_05000311 || ANOMALY_05000323) { \
+		AWA_DUMMY_READ(name); \
+		local_irq_restore_hw(flags); \
+	} \
 } \
 EXPORT_SYMBOL(set_gpiop_ ## name);
-#else
-#define SET_GPIO_P(name) \
-void set_gpiop_ ## name(unsigned gpio, unsigned short arg) \
-{ \
-	gpio_bankb[gpio_bank(gpio)]->name = arg; \
-} \
-EXPORT_SYMBOL(set_gpiop_ ## name);
-#endif
 
 SET_GPIO_P(data)
 SET_GPIO_P(dir)
@@ -519,27 +424,21 @@ SET_GPIO_P(maska)
 SET_GPIO_P(maskb)
 
 /* Get a specific bit */
-#if ANOMALY_05000311 || ANOMALY_05000323
 #define GET_GPIO(name) \
 unsigned short get_gpio_ ## name(unsigned gpio) \
 { \
 	unsigned long flags; \
 	unsigned short ret; \
-	local_irq_save_hw(flags); \
-	ret = 0x01 & (gpio_bankb[gpio_bank(gpio)]->name >> gpio_sub_n(gpio)); \
-	AWA_DUMMY_READ(name); \
-	local_irq_restore_hw(flags); \
+	if (ANOMALY_05000311 || ANOMALY_05000323) \
+		local_irq_save_hw(flags); \
+	ret = 0x01 & (gpio_array[gpio_bank(gpio)]->name >> gpio_sub_n(gpio)); \
+	if (ANOMALY_05000311 || ANOMALY_05000323) { \
+		AWA_DUMMY_READ(name); \
+		local_irq_restore_hw(flags); \
+	} \
 	return ret; \
 } \
 EXPORT_SYMBOL(get_gpio_ ## name);
-#else
-#define GET_GPIO(name) \
-unsigned short get_gpio_ ## name(unsigned gpio) \
-{ \
-	return (0x01 & (gpio_bankb[gpio_bank(gpio)]->name >> gpio_sub_n(gpio))); \
-} \
-EXPORT_SYMBOL(get_gpio_ ## name);
-#endif
 
 GET_GPIO(data)
 GET_GPIO(dir)
@@ -552,27 +451,21 @@ GET_GPIO(maskb)
 
 /*Get current PORT date (16-bit word)*/
 
-#if ANOMALY_05000311 || ANOMALY_05000323
 #define GET_GPIO_P(name) \
 unsigned short get_gpiop_ ## name(unsigned gpio) \
 { \
 	unsigned long flags; \
 	unsigned short ret; \
-	local_irq_save_hw(flags); \
-	ret = (gpio_bankb[gpio_bank(gpio)]->name); \
-	AWA_DUMMY_READ(name); \
-	local_irq_restore_hw(flags); \
+	if (ANOMALY_05000311 || ANOMALY_05000323) \
+		local_irq_save_hw(flags); \
+	ret = (gpio_array[gpio_bank(gpio)]->name); \
+	if (ANOMALY_05000311 || ANOMALY_05000323) { \
+		AWA_DUMMY_READ(name); \
+		local_irq_restore_hw(flags); \
+	} \
 	return ret; \
 } \
 EXPORT_SYMBOL(get_gpiop_ ## name);
-#else
-#define GET_GPIO_P(name) \
-unsigned short get_gpiop_ ## name(unsigned gpio) \
-{ \
-	return (gpio_bankb[gpio_bank(gpio)]->name);\
-} \
-EXPORT_SYMBOL(get_gpiop_ ## name);
-#endif
 
 GET_GPIO_P(data)
 GET_GPIO_P(dir)
@@ -585,6 +478,26 @@ GET_GPIO_P(maskb)
 
 
 #ifdef CONFIG_PM
+
+static unsigned short wakeup_map[GPIO_BANK_NUM];
+static unsigned char wakeup_flags_map[MAX_BLACKFIN_GPIOS];
+
+static const unsigned int sic_iwr_irqs[] = {
+#if defined(BF533_FAMILY)
+	IRQ_PROG_INTB
+#elif defined(BF537_FAMILY)
+	IRQ_PROG_INTB, IRQ_PORTG_INTB, IRQ_MAC_TX
+#elif defined(BF538_FAMILY)
+	IRQ_PORTF_INTB
+#elif defined(BF527_FAMILY) || defined(BF518_FAMILY)
+	IRQ_PORTF_INTB, IRQ_PORTG_INTB, IRQ_PORTH_INTB
+#elif defined(BF561_FAMILY)
+	IRQ_PROG0_INTB, IRQ_PROG1_INTB, IRQ_PROG2_INTB
+#else
+# error no SIC_IWR defined
+#endif
+};
+
 /***********************************************************
 *
 * FUNCTIONS: Blackfin PM Setup API
@@ -669,18 +582,18 @@ u32 bfin_pm_standby_setup(void)
 		mask = wakeup_map[gpio_bank(i)];
 		bank = gpio_bank(i);
 
-		gpio_bank_saved[bank].maskb = gpio_bankb[bank]->maskb;
-		gpio_bankb[bank]->maskb = 0;
+		gpio_bank_saved[bank].maskb = gpio_array[bank]->maskb;
+		gpio_array[bank]->maskb = 0;
 
 		if (mask) {
 #if defined(BF527_FAMILY) || defined(BF537_FAMILY) || defined(BF518_FAMILY)
 			gpio_bank_saved[bank].fer   = *port_fer[bank];
 #endif
-			gpio_bank_saved[bank].inen  = gpio_bankb[bank]->inen;
-			gpio_bank_saved[bank].polar = gpio_bankb[bank]->polar;
-			gpio_bank_saved[bank].dir   = gpio_bankb[bank]->dir;
-			gpio_bank_saved[bank].edge  = gpio_bankb[bank]->edge;
-			gpio_bank_saved[bank].both  = gpio_bankb[bank]->both;
+			gpio_bank_saved[bank].inen  = gpio_array[bank]->inen;
+			gpio_bank_saved[bank].polar = gpio_array[bank]->polar;
+			gpio_bank_saved[bank].dir   = gpio_array[bank]->dir;
+			gpio_bank_saved[bank].edge  = gpio_array[bank]->edge;
+			gpio_bank_saved[bank].both  = gpio_array[bank]->both;
 			gpio_bank_saved[bank].reserved =
 						reserved_gpio_map[bank];
 
@@ -700,7 +613,7 @@ u32 bfin_pm_standby_setup(void)
 			}
 
 			bfin_internal_set_wake(sic_iwr_irqs[bank], 1);
-			gpio_bankb[bank]->maskb_set = wakeup_map[gpio_bank(i)];
+			gpio_array[bank]->maskb_set = wakeup_map[gpio_bank(i)];
 		}
 	}
 
@@ -721,18 +634,18 @@ void bfin_pm_standby_restore(void)
 #if defined(BF527_FAMILY) || defined(BF537_FAMILY) || defined(BF518_FAMILY)
 			*port_fer[bank]   	= gpio_bank_saved[bank].fer;
 #endif
-			gpio_bankb[bank]->inen  = gpio_bank_saved[bank].inen;
-			gpio_bankb[bank]->dir   = gpio_bank_saved[bank].dir;
-			gpio_bankb[bank]->polar = gpio_bank_saved[bank].polar;
-			gpio_bankb[bank]->edge  = gpio_bank_saved[bank].edge;
-			gpio_bankb[bank]->both  = gpio_bank_saved[bank].both;
+			gpio_array[bank]->inen  = gpio_bank_saved[bank].inen;
+			gpio_array[bank]->dir   = gpio_bank_saved[bank].dir;
+			gpio_array[bank]->polar = gpio_bank_saved[bank].polar;
+			gpio_array[bank]->edge  = gpio_bank_saved[bank].edge;
+			gpio_array[bank]->both  = gpio_bank_saved[bank].both;
 
 			reserved_gpio_map[bank] =
 					gpio_bank_saved[bank].reserved;
 			bfin_internal_set_wake(sic_iwr_irqs[bank], 0);
 		}
 
-		gpio_bankb[bank]->maskb = gpio_bank_saved[bank].maskb;
+		gpio_array[bank]->maskb = gpio_bank_saved[bank].maskb;
 	}
 	AWA_DUMMY_READ(maskb);
 }
@@ -745,21 +658,21 @@ void bfin_gpio_pm_hibernate_suspend(void)
 		bank = gpio_bank(i);
 
 #if defined(BF527_FAMILY) || defined(BF537_FAMILY) || defined(BF518_FAMILY)
-			gpio_bank_saved[bank].fer   = *port_fer[bank];
+		gpio_bank_saved[bank].fer = *port_fer[bank];
 #if defined(BF527_FAMILY) || defined(BF518_FAMILY)
-			gpio_bank_saved[bank].mux   = *port_mux[bank];
+		gpio_bank_saved[bank].mux = *port_mux[bank];
 #else
-			if (bank == 0)
-				gpio_bank_saved[bank].mux   = bfin_read_PORT_MUX();
+		if (bank == 0)
+			gpio_bank_saved[bank].mux = bfin_read_PORT_MUX();
 #endif
 #endif
-			gpio_bank_saved[bank].data  = gpio_bankb[bank]->data;
-			gpio_bank_saved[bank].inen  = gpio_bankb[bank]->inen;
-			gpio_bank_saved[bank].polar = gpio_bankb[bank]->polar;
-			gpio_bank_saved[bank].dir   = gpio_bankb[bank]->dir;
-			gpio_bank_saved[bank].edge  = gpio_bankb[bank]->edge;
-			gpio_bank_saved[bank].both  = gpio_bankb[bank]->both;
-			gpio_bank_saved[bank].maska  = gpio_bankb[bank]->maska;
+		gpio_bank_saved[bank].data  = gpio_array[bank]->data;
+		gpio_bank_saved[bank].inen  = gpio_array[bank]->inen;
+		gpio_bank_saved[bank].polar = gpio_array[bank]->polar;
+		gpio_bank_saved[bank].dir   = gpio_array[bank]->dir;
+		gpio_bank_saved[bank].edge  = gpio_array[bank]->edge;
+		gpio_bank_saved[bank].both  = gpio_array[bank]->both;
+		gpio_bank_saved[bank].maska = gpio_array[bank]->maska;
 	}
 
 	AWA_DUMMY_READ(maska);
@@ -770,27 +683,27 @@ void bfin_gpio_pm_hibernate_restore(void)
 	int i, bank;
 
 	for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) {
-			bank = gpio_bank(i);
+		bank = gpio_bank(i);
 
 #if defined(BF527_FAMILY) || defined(BF537_FAMILY) || defined(BF518_FAMILY)
 #if defined(BF527_FAMILY) || defined(BF518_FAMILY)
-			*port_mux[bank] = gpio_bank_saved[bank].mux;
+		*port_mux[bank] = gpio_bank_saved[bank].mux;
 #else
-			if (bank == 0)
-				bfin_write_PORT_MUX(gpio_bank_saved[bank].mux);
+		if (bank == 0)
+			bfin_write_PORT_MUX(gpio_bank_saved[bank].mux);
 #endif
-			*port_fer[bank]   	= gpio_bank_saved[bank].fer;
+		*port_fer[bank] = gpio_bank_saved[bank].fer;
 #endif
-			gpio_bankb[bank]->inen  = gpio_bank_saved[bank].inen;
-			gpio_bankb[bank]->dir   = gpio_bank_saved[bank].dir;
-			gpio_bankb[bank]->polar = gpio_bank_saved[bank].polar;
-			gpio_bankb[bank]->edge  = gpio_bank_saved[bank].edge;
-			gpio_bankb[bank]->both  = gpio_bank_saved[bank].both;
+		gpio_array[bank]->inen  = gpio_bank_saved[bank].inen;
+		gpio_array[bank]->dir   = gpio_bank_saved[bank].dir;
+		gpio_array[bank]->polar = gpio_bank_saved[bank].polar;
+		gpio_array[bank]->edge  = gpio_bank_saved[bank].edge;
+		gpio_array[bank]->both  = gpio_bank_saved[bank].both;
 
-			gpio_bankb[bank]->data_set = gpio_bank_saved[bank].data
-							| gpio_bank_saved[bank].dir;
+		gpio_array[bank]->data_set = gpio_bank_saved[bank].data
+						| gpio_bank_saved[bank].dir;
 
-			gpio_bankb[bank]->maska = gpio_bank_saved[bank].maska;
+		gpio_array[bank]->maska = gpio_bank_saved[bank].maska;
 	}
 	AWA_DUMMY_READ(maska);
 }
@@ -817,12 +730,12 @@ void bfin_gpio_pm_hibernate_suspend(void)
 	for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) {
 		bank = gpio_bank(i);
 
-			gpio_bank_saved[bank].fer  = gpio_array[bank]->port_fer;
-			gpio_bank_saved[bank].mux  = gpio_array[bank]->port_mux;
-			gpio_bank_saved[bank].data  = gpio_array[bank]->port_data;
-			gpio_bank_saved[bank].data  = gpio_array[bank]->port_data;
-			gpio_bank_saved[bank].inen  = gpio_array[bank]->port_inen;
-			gpio_bank_saved[bank].dir   = gpio_array[bank]->port_dir_set;
+		gpio_bank_saved[bank].fer = gpio_array[bank]->port_fer;
+		gpio_bank_saved[bank].mux = gpio_array[bank]->port_mux;
+		gpio_bank_saved[bank].data = gpio_array[bank]->data;
+		gpio_bank_saved[bank].data = gpio_array[bank]->data;
+		gpio_bank_saved[bank].inen = gpio_array[bank]->inen;
+		gpio_bank_saved[bank].dir = gpio_array[bank]->dir_set;
 	}
 }
 
@@ -831,21 +744,21 @@ void bfin_gpio_pm_hibernate_restore(void)
 	int i, bank;
 
 	for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) {
-			bank = gpio_bank(i);
-
-			gpio_array[bank]->port_mux  = gpio_bank_saved[bank].mux;
-			gpio_array[bank]->port_fer  = gpio_bank_saved[bank].fer;
-			gpio_array[bank]->port_inen  = gpio_bank_saved[bank].inen;
-			gpio_array[bank]->port_dir_set   = gpio_bank_saved[bank].dir;
-			gpio_array[bank]->port_set = gpio_bank_saved[bank].data
-							| gpio_bank_saved[bank].dir;
+		bank = gpio_bank(i);
+
+		gpio_array[bank]->port_mux = gpio_bank_saved[bank].mux;
+		gpio_array[bank]->port_fer = gpio_bank_saved[bank].fer;
+		gpio_array[bank]->inen = gpio_bank_saved[bank].inen;
+		gpio_array[bank]->dir_set = gpio_bank_saved[bank].dir;
+		gpio_array[bank]->data_set = gpio_bank_saved[bank].data
+						| gpio_bank_saved[bank].dir;
 	}
 }
 #endif
 
 unsigned short get_gpio_dir(unsigned gpio)
 {
-	return (0x01 & (gpio_array[gpio_bank(gpio)]->port_dir_clear >> gpio_sub_n(gpio)));
+	return (0x01 & (gpio_array[gpio_bank(gpio)]->dir_clear >> gpio_sub_n(gpio)));
 }
 EXPORT_SYMBOL(get_gpio_dir);
 
@@ -905,9 +818,7 @@ int peripheral_request(unsigned short per, const char *label)
 		 */
 
 #ifdef BF548_FAMILY
-		u16 funct = get_portmux(ident);
-
-		if (!((per & P_MAYSHARE) && (funct == P_FUNCT2MUX(per)))) {
+		if (!((per & P_MAYSHARE) && get_portmux(per) == P_FUNCT2MUX(per))) {
 #else
 		if (!(per & P_MAYSHARE)) {
 #endif
@@ -931,11 +842,7 @@ int peripheral_request(unsigned short per, const char *label)
  anyway:
 	reserved_peri_map[gpio_bank(ident)] |= gpio_bit(ident);
 
-#ifdef BF548_FAMILY
-	portmux_setup(ident, P_FUNCT2MUX(per));
-#else
-	portmux_setup(per, P_FUNCT2MUX(per));
-#endif
+	portmux_setup(per);
 	port_setup(ident, PERIPHERAL_USAGE);
 
 	local_irq_restore_hw(flags);
@@ -977,9 +884,6 @@ void peripheral_free(unsigned short per)
 	if (!(per & P_DEFINED))
 		return;
 
-	if (check_gpio(ident) < 0)
-		return;
-
 	local_irq_save_hw(flags);
 
 	if (unlikely(!(reserved_peri_map[gpio_bank(ident)] & gpio_bit(ident)))) {
@@ -1056,9 +960,15 @@ int bfin_gpio_request(unsigned gpio, const char *label)
 		local_irq_restore_hw(flags);
 		return -EBUSY;
 	}
-	if (unlikely(reserved_gpio_irq_map[gpio_bank(gpio)] & gpio_bit(gpio)))
+	if (unlikely(reserved_gpio_irq_map[gpio_bank(gpio)] & gpio_bit(gpio))) {
 		printk(KERN_NOTICE "bfin-gpio: GPIO %d is already reserved as gpio-irq!"
 		       " (Documentation/blackfin/bfin-gpio-notes.txt)\n", gpio);
+	}
+#ifndef BF548_FAMILY
+	else {	/* Reset POLAR setting when acquiring a gpio for the first time */
+		set_gpio_polar(gpio, 0);
+	}
+#endif
 
 	reserved_gpio_map[gpio_bank(gpio)] |= gpio_bit(gpio);
 	set_label(gpio, label);
@@ -1078,6 +988,8 @@ void bfin_gpio_free(unsigned gpio)
 	if (check_gpio(gpio) < 0)
 		return;
 
+	might_sleep();
+
 	local_irq_save_hw(flags);
 
 	if (unlikely(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio)))) {
@@ -1158,8 +1070,16 @@ void bfin_gpio_irq_free(unsigned gpio)
 	local_irq_restore_hw(flags);
 }
 
-
+static inline void __bfin_gpio_direction_input(unsigned gpio)
+{
 #ifdef BF548_FAMILY
+	gpio_array[gpio_bank(gpio)]->dir_clear = gpio_bit(gpio);
+#else
+	gpio_array[gpio_bank(gpio)]->dir &= ~gpio_bit(gpio);
+#endif
+	gpio_array[gpio_bank(gpio)]->inen |= gpio_bit(gpio);
+}
+
 int bfin_gpio_direction_input(unsigned gpio)
 {
 	unsigned long flags;
@@ -1170,125 +1090,85 @@ int bfin_gpio_direction_input(unsigned gpio)
 	}
 
 	local_irq_save_hw(flags);
-	gpio_array[gpio_bank(gpio)]->port_dir_clear = gpio_bit(gpio);
-	gpio_array[gpio_bank(gpio)]->port_inen |= gpio_bit(gpio);
+	__bfin_gpio_direction_input(gpio);
+	AWA_DUMMY_READ(inen);
 	local_irq_restore_hw(flags);
 
 	return 0;
 }
 EXPORT_SYMBOL(bfin_gpio_direction_input);
 
-int bfin_gpio_direction_output(unsigned gpio, int value)
+void bfin_gpio_irq_prepare(unsigned gpio)
 {
+#ifdef BF548_FAMILY
 	unsigned long flags;
+#endif
 
-	if (!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))) {
-		gpio_error(gpio);
-		return -EINVAL;
-	}
+	port_setup(gpio, GPIO_USAGE);
 
+#ifdef BF548_FAMILY
 	local_irq_save_hw(flags);
-	gpio_array[gpio_bank(gpio)]->port_inen &= ~gpio_bit(gpio);
-	gpio_set_value(gpio, value);
-	gpio_array[gpio_bank(gpio)]->port_dir_set = gpio_bit(gpio);
+	__bfin_gpio_direction_input(gpio);
 	local_irq_restore_hw(flags);
-
-	return 0;
+#endif
 }
-EXPORT_SYMBOL(bfin_gpio_direction_output);
 
 void bfin_gpio_set_value(unsigned gpio, int arg)
 {
 	if (arg)
-		gpio_array[gpio_bank(gpio)]->port_set = gpio_bit(gpio);
+		gpio_array[gpio_bank(gpio)]->data_set = gpio_bit(gpio);
 	else
-		gpio_array[gpio_bank(gpio)]->port_clear = gpio_bit(gpio);
+		gpio_array[gpio_bank(gpio)]->data_clear = gpio_bit(gpio);
 }
 EXPORT_SYMBOL(bfin_gpio_set_value);
 
-int bfin_gpio_get_value(unsigned gpio)
-{
-	return (1 & (gpio_array[gpio_bank(gpio)]->port_data >> gpio_sub_n(gpio)));
-}
-EXPORT_SYMBOL(bfin_gpio_get_value);
-
-void bfin_gpio_irq_prepare(unsigned gpio)
+int bfin_gpio_direction_output(unsigned gpio, int value)
 {
 	unsigned long flags;
 
-	port_setup(gpio, GPIO_USAGE);
+	if (!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))) {
+		gpio_error(gpio);
+		return -EINVAL;
+	}
 
 	local_irq_save_hw(flags);
-	gpio_array[gpio_bank(gpio)]->port_dir_clear = gpio_bit(gpio);
-	gpio_array[gpio_bank(gpio)]->port_inen |= gpio_bit(gpio);
-	local_irq_restore_hw(flags);
-}
 
+	gpio_array[gpio_bank(gpio)]->inen &= ~gpio_bit(gpio);
+	gpio_set_value(gpio, value);
+#ifdef BF548_FAMILY
+	gpio_array[gpio_bank(gpio)]->dir_set = gpio_bit(gpio);
 #else
+	gpio_array[gpio_bank(gpio)]->dir |= gpio_bit(gpio);
+#endif
+
+	AWA_DUMMY_READ(dir);
+	local_irq_restore_hw(flags);
+
+	return 0;
+}
+EXPORT_SYMBOL(bfin_gpio_direction_output);
 
 int bfin_gpio_get_value(unsigned gpio)
 {
+#ifdef BF548_FAMILY
+	return (1 & (gpio_array[gpio_bank(gpio)]->data >> gpio_sub_n(gpio)));
+#else
 	unsigned long flags;
-	int ret;
 
 	if (unlikely(get_gpio_edge(gpio))) {
+		int ret;
 		local_irq_save_hw(flags);
 		set_gpio_edge(gpio, 0);
 		ret = get_gpio_data(gpio);
 		set_gpio_edge(gpio, 1);
 		local_irq_restore_hw(flags);
-
 		return ret;
 	} else
 		return get_gpio_data(gpio);
+#endif
 }
 EXPORT_SYMBOL(bfin_gpio_get_value);
 
-
-int bfin_gpio_direction_input(unsigned gpio)
-{
-	unsigned long flags;
-
-	if (!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))) {
-		gpio_error(gpio);
-		return -EINVAL;
-	}
-
-	local_irq_save_hw(flags);
-	gpio_bankb[gpio_bank(gpio)]->dir &= ~gpio_bit(gpio);
-	gpio_bankb[gpio_bank(gpio)]->inen |= gpio_bit(gpio);
-	AWA_DUMMY_READ(inen);
-	local_irq_restore_hw(flags);
-
-	return 0;
-}
-EXPORT_SYMBOL(bfin_gpio_direction_input);
-
-int bfin_gpio_direction_output(unsigned gpio, int value)
-{
-	unsigned long flags;
-
-	if (!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))) {
-		gpio_error(gpio);
-		return -EINVAL;
-	}
-
-	local_irq_save_hw(flags);
-	gpio_bankb[gpio_bank(gpio)]->inen &= ~gpio_bit(gpio);
-
-	if (value)
-		gpio_bankb[gpio_bank(gpio)]->data_set = gpio_bit(gpio);
-	else
-		gpio_bankb[gpio_bank(gpio)]->data_clear = gpio_bit(gpio);
-
-	gpio_bankb[gpio_bank(gpio)]->dir |= gpio_bit(gpio);
-	AWA_DUMMY_READ(dir);
-	local_irq_restore_hw(flags);
-
-	return 0;
-}
-EXPORT_SYMBOL(bfin_gpio_direction_output);
-
 /* If we are booting from SPI and our board lacks a strong enough pull up,
  * the core can reset and execute the bootrom faster than the resistor can
  * pull the signal logically high.  To work around this (common) error in
@@ -1299,23 +1179,15 @@ EXPORT_SYMBOL(bfin_gpio_direction_output);
  * lives here as we need to force all the GPIO states w/out going through
  * BUG() checks and such.
  */
-void bfin_gpio_reset_spi0_ssel1(void)
+void bfin_reset_boot_spi_cs(unsigned short pin)
 {
-	u16 gpio = P_IDENT(P_SPI0_SSEL1);
-
+	unsigned short gpio = P_IDENT(pin);
 	port_setup(gpio, GPIO_USAGE);
-	gpio_bankb[gpio_bank(gpio)]->data_set = gpio_bit(gpio);
+	gpio_array[gpio_bank(gpio)]->data_set = gpio_bit(gpio);
 	AWA_DUMMY_READ(data_set);
 	udelay(1);
 }
 
-void bfin_gpio_irq_prepare(unsigned gpio)
-{
-	port_setup(gpio, GPIO_USAGE);
-}
-
-#endif /*BF548_FAMILY */
-
 #if defined(CONFIG_PROC_FS)
 static int gpio_proc_read(char *buf, char **start, off_t offset,
 			  int len, int *unused_i, void *unused_v)
@@ -1369,11 +1241,7 @@ int bfin_gpiolib_get_value(struct gpio_chip *chip, unsigned gpio)
 
 void bfin_gpiolib_set_value(struct gpio_chip *chip, unsigned gpio, int value)
 {
-#ifdef BF548_FAMILY
 	return bfin_gpio_set_value(gpio, value);
-#else
-	return set_gpio_data(gpio, value);
-#endif
 }
 
 int bfin_gpiolib_gpio_request(struct gpio_chip *chip, unsigned gpio)

arch/blackfin/kernel/cplb-mpu/cplbinit.c

@@ -63,10 +63,8 @@ void __init generate_cplb_tables_cpu(unsigned int cpu)
 	dcplb_tbl[cpu][i_d].addr = 0;
 	dcplb_tbl[cpu][i_d++].data = SDRAM_OOPS | PAGE_SIZE_1KB;
 
-#if 0
 	icplb_tbl[cpu][i_i].addr = 0;
-	icplb_tbl[cpu][i_i++].data = i_cache | CPLB_USER_RD | PAGE_SIZE_4KB;
-#endif
+	icplb_tbl[cpu][i_i++].data = i_cache | CPLB_USER_RD | PAGE_SIZE_1KB;
 
 	/* Cover kernel memory with 4M pages.  */
 	addr = 0;

arch/blackfin/kernel/cplb-nompu/cplbmgr.c

@@ -163,12 +163,14 @@ MGR_ATTR static int icplb_miss(int cpu)
 		nr_icplb_supv_miss[cpu]++;
 
 	base = 0;
-	for (idx = 0; idx < icplb_nr_bounds; idx++) {
+	idx = 0;
+	do {
 		eaddr = icplb_bounds[idx].eaddr;
 		if (addr < eaddr)
 			break;
 		base = eaddr;
-	}
+	} while (++idx < icplb_nr_bounds);
+
 	if (unlikely(idx == icplb_nr_bounds))
 		return CPLB_NO_ADDR_MATCH;
 
@@ -208,12 +210,14 @@ MGR_ATTR static int dcplb_miss(int cpu)
 		nr_dcplb_supv_miss[cpu]++;
 
 	base = 0;
-	for (idx = 0; idx < dcplb_nr_bounds; idx++) {
+	idx = 0;
+	do {
 		eaddr = dcplb_bounds[idx].eaddr;
 		if (addr < eaddr)
 			break;
 		base = eaddr;
-	}
+	} while (++idx < dcplb_nr_bounds);
+
 	if (unlikely(idx == dcplb_nr_bounds))
 		return CPLB_NO_ADDR_MATCH;
 

arch/blackfin/kernel/irqchip.c

@@ -35,6 +35,7 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <asm/trace.h>
+#include <asm/pda.h>
 
 static atomic_t irq_err_count;
 static spinlock_t irq_controller_lock;
@@ -91,8 +92,13 @@ int show_interrupts(struct seq_file *p, void *v)
 		seq_putc(p, '\n');
  skip:
 		spin_unlock_irqrestore(&irq_desc[i].lock, flags);
-	} else if (i == NR_IRQS)
+	} else if (i == NR_IRQS) {
+		seq_printf(p, "NMI: ");
+		for_each_online_cpu(j)
+			seq_printf(p, "%10u ", cpu_pda[j].__nmi_count);
+		seq_printf(p, "     CORE  Non Maskable Interrupt\n");
 		seq_printf(p, "Err: %10u\n",  atomic_read(&irq_err_count));
+	}
 	return 0;
 }
 

arch/blackfin/kernel/reboot.c

@@ -20,8 +20,8 @@
  * reset while the Core B bit (on dual core parts) is cleared by
  * the core reset.
  */
-__attribute__((l1_text))
-static void _bfin_reset(void)
+__attribute__ ((__l1_text__, __noreturn__))
+static void bfin_reset(void)
 {
 	/* Wait for completion of "system" events such as cache line
 	 * line fills so that we avoid infinite stalls later on as
@@ -30,7 +30,11 @@ static void _bfin_reset(void)
 	 */
 	__builtin_bfin_ssync();
 
-	while (1) {
+	/* The bootrom checks to see how it was reset and will
+	 * automatically perform a software reset for us when
+	 * it starts executing after the core reset.
+	 */
+	if (ANOMALY_05000353 || ANOMALY_05000386) {
 		/* Initiate System software reset. */
 		bfin_write_SWRST(0x7);
 
@@ -50,6 +54,11 @@ static void _bfin_reset(void)
 		/* Clear System software reset */
 		bfin_write_SWRST(0);
 
+		/* The BF526 ROM will crash during reset */
+#if defined(__ADSPBF522__) || defined(__ADSPBF524__) || defined(__ADSPBF526__)
+		bfin_read_SWRST();
+#endif
+
 		/* Wait for the SWRST write to complete.  Cannot rely on SSYNC
 		 * though as the System state is all reset now.
 		 */
@@ -60,22 +69,11 @@ static void _bfin_reset(void)
 			: "a" (15 * 1)
 			: "LC1", "LB1", "LT1"
 		);
+	}
 
+	while (1)
 		/* Issue core reset */
 		asm("raise 1");
-	}
-}
-
-static void bfin_reset(void)
-{
-	if (ANOMALY_05000353 || ANOMALY_05000386)
-		_bfin_reset();
-	else
-		/* the bootrom checks to see how it was reset and will
-		 * automatically perform a software reset for us when
-		 * it starts executing boot
-		 */
-		asm("raise 1;");
 }
 
 __attribute__((weak))

arch/blackfin/kernel/setup.c

@@ -60,7 +60,7 @@ void __initdata *init_retx, *init_saved_retx, *init_saved_seqstat,
 #define BFIN_MEMMAP_MAX		128 /* number of entries in bfin_memmap */
 #define BFIN_MEMMAP_RAM		1
 #define BFIN_MEMMAP_RESERVED	2
-struct bfin_memmap {
+static struct bfin_memmap {
 	int nr_map;
 	struct bfin_memmap_entry {
 		unsigned long long addr; /* start of memory segment */
@@ -824,7 +824,15 @@ void __init setup_arch(char **cmdline_p)
 	flash_probe();
 #endif
 
+	printk(KERN_INFO "Boot Mode: %i\n", bfin_read_SYSCR() & 0xF);
+
+	/* Newer parts mirror SWRST bits in SYSCR */
+#if defined(CONFIG_BF53x) || defined(CONFIG_BF561) || \
+    defined(CONFIG_BF538) || defined(CONFIG_BF539)
 	_bfin_swrst = bfin_read_SWRST();
+#else
+	_bfin_swrst = bfin_read_SYSCR();
+#endif
 
 #ifdef CONFIG_DEBUG_DOUBLEFAULT_PRINT
 	bfin_write_SWRST(_bfin_swrst & ~DOUBLE_FAULT);
@@ -853,7 +861,7 @@ void __init setup_arch(char **cmdline_p)
 	else if (_bfin_swrst & RESET_SOFTWARE)
 		printk(KERN_NOTICE "Reset caused by Software reset\n");
 
-	printk(KERN_INFO "Blackfin support (C) 2004-2008 Analog Devices, Inc.\n");
+	printk(KERN_INFO "Blackfin support (C) 2004-2009 Analog Devices, Inc.\n");
 	if (bfin_compiled_revid() == 0xffff)
 		printk(KERN_INFO "Compiled for ADSP-%s Rev any\n", CPU);
 	else if (bfin_compiled_revid() == -1)

arch/blackfin/kernel/traps.c

@@ -673,6 +673,14 @@ static void decode_instruction(unsigned short *address)
 			verbose_printk("RTI");
 		else if (opcode == 0x0012)
 			verbose_printk("RTX");
+		else if (opcode == 0x0013)
+			verbose_printk("RTN");
+		else if (opcode == 0x0014)
+			verbose_printk("RTE");
+		else if (opcode == 0x0025)
+			verbose_printk("EMUEXCPT");
+		else if (opcode == 0x0040 && opcode <= 0x0047)
+			verbose_printk("STI R%i", opcode & 7);
 		else if (opcode >= 0x0050 && opcode <= 0x0057)
 			verbose_printk("JUMP (P%i)", opcode & 7);
 		else if (opcode >= 0x0060 && opcode <= 0x0067)
@@ -681,6 +689,10 @@ static void decode_instruction(unsigned short *address)
 			verbose_printk("CALL (PC+P%i)", opcode & 7);
 		else if (opcode >= 0x0080 && opcode <= 0x0087)
 			verbose_printk("JUMP (PC+P%i)", opcode & 7);
+		else if (opcode >= 0x0090 && opcode <= 0x009F)
+			verbose_printk("RAISE 0x%x", opcode & 0xF);
+		else if (opcode >= 0x00A0 && opcode <= 0x00AF)
+			verbose_printk("EXCPT 0x%x", opcode & 0xF);
 		else if ((opcode >= 0x1000 && opcode <= 0x13FF) || (opcode >= 0x1800 && opcode <= 0x1BFF))
 			verbose_printk("IF !CC JUMP");
 		else if ((opcode >= 0x1400 && opcode <= 0x17ff) || (opcode >= 0x1c00 && opcode <= 0x1fff))
@@ -820,11 +832,8 @@ void show_stack(struct task_struct *task, unsigned long *stack)
 	decode_address(buf, (unsigned int)stack);
 	printk(KERN_NOTICE " SP: [0x%p] %s\n", stack, buf);
 
-	addr = (unsigned int *)((unsigned int)stack & ~0x3F);
-
 	/* First thing is to look for a frame pointer */
-	for (addr = (unsigned int *)((unsigned int)stack & ~0xF), i = 0;
-		addr < endstack; addr++, i++) {
+	for (addr = (unsigned int *)((unsigned int)stack & ~0xF); addr < endstack; addr++) {
 		if (*addr & 0x1)
 			continue;
 		ins_addr = (unsigned short *)*addr;
@@ -834,7 +843,8 @@ void show_stack(struct task_struct *task, unsigned long *stack)
 
 		if (fp) {
 			/* Let's check to see if it is a frame pointer */
-			while (fp >= (addr - 1) && fp < endstack && fp)
+			while (fp >= (addr - 1) && fp < endstack
+			       && fp && ((unsigned int) fp & 0x3) == 0)
 				fp = (unsigned int *)*fp;
 			if (fp == 0 || fp == endstack) {
 				fp = addr - 1;
@@ -1052,8 +1062,9 @@ void show_regs(struct pt_regs *fp)
 	char buf [150];
 	struct irqaction *action;
 	unsigned int i;
-	unsigned long flags;
+	unsigned long flags = 0;
 	unsigned int cpu = smp_processor_id();
+	unsigned char in_atomic = (bfin_read_IPEND() & 0x10) || in_atomic();
 
 	verbose_printk(KERN_NOTICE "\n" KERN_NOTICE "SEQUENCER STATUS:\t\t%s\n", print_tainted());
 	verbose_printk(KERN_NOTICE " SEQSTAT: %08lx  IPEND: %04lx  SYSCFG: %04lx\n",
@@ -1073,17 +1084,22 @@ void show_regs(struct pt_regs *fp)
 	}
 	verbose_printk(KERN_NOTICE "  EXCAUSE   : 0x%lx\n",
 		fp->seqstat & SEQSTAT_EXCAUSE);
-	for (i = 6; i <= 15 ; i++) {
+	for (i = 2; i <= 15 ; i++) {
 		if (fp->ipend & (1 << i)) {
-			decode_address(buf, bfin_read32(EVT0 + 4*i));
-			verbose_printk(KERN_NOTICE "  physical IVG%i asserted : %s\n", i, buf);
+			if (i != 4) {
+				decode_address(buf, bfin_read32(EVT0 + 4*i));
+				verbose_printk(KERN_NOTICE "  physical IVG%i asserted : %s\n", i, buf);
+			} else
+				verbose_printk(KERN_NOTICE "  interrupts disabled\n");
 		}
 	}
 
 	/* if no interrupts are going off, don't print this out */
 	if (fp->ipend & ~0x3F) {
 		for (i = 0; i < (NR_IRQS - 1); i++) {
-			spin_lock_irqsave(&irq_desc[i].lock, flags);
+			if (!in_atomic)
+				spin_lock_irqsave(&irq_desc[i].lock, flags);
+
 			action = irq_desc[i].action;
 			if (!action)
 				goto unlock;
@@ -1096,7 +1112,8 @@ void show_regs(struct pt_regs *fp)
 			}
 			verbose_printk("\n");
 unlock:
-			spin_unlock_irqrestore(&irq_desc[i].lock, flags);
+			if (!in_atomic)
+				spin_unlock_irqrestore(&irq_desc[i].lock, flags);
 		}
 	}
 

arch/blackfin/mach-bf518/boards/ezbrd.c

@@ -46,6 +46,7 @@
 #include <asm/dpmc.h>
 #include <asm/bfin_sdh.h>
 #include <linux/spi/ad7877.h>
+#include <net/dsa.h>
 
 /*
  * Name the Board for the /proc/cpuinfo
@@ -104,8 +105,31 @@ static struct platform_device rtc_device = {
 #endif
 
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+static struct platform_device bfin_mii_bus = {
+	.name = "bfin_mii_bus",
+};
+
 static struct platform_device bfin_mac_device = {
 	.name = "bfin_mac",
+	.dev.platform_data = &bfin_mii_bus,
+};
+#endif
+
+#if defined(CONFIG_NET_DSA_KSZ8893M) || defined(CONFIG_NET_DSA_KSZ8893M_MODULE)
+static struct dsa_platform_data ksz8893m_switch_data = {
+	.mii_bus = &bfin_mii_bus.dev,
+	.netdev = &bfin_mac_device.dev,
+	.port_names[0]	= NULL,
+	.port_names[1]	= "eth%d",
+	.port_names[2]	= "eth%d",
+	.port_names[3]	= "cpu",
+};
+
+static struct platform_device ksz8893m_switch_device = {
+	.name		= "dsa",
+	.id		= 0,
+	.num_resources	= 0,
+	.dev.platform_data = &ksz8893m_switch_data,
 };
 #endif
 
@@ -147,6 +171,15 @@ static struct bfin5xx_spi_chip spi_adc_chip_info = {
 };
 #endif
 
+#if defined(CONFIG_NET_DSA_KSZ8893M) \
+	|| defined(CONFIG_NET_DSA_KSZ8893M_MODULE)
+/* SPI SWITCH CHIP */
+static struct bfin5xx_spi_chip spi_switch_info = {
+	.enable_dma = 0,
+	.bits_per_word = 8,
+};
+#endif
+
 #if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
 static struct bfin5xx_spi_chip spi_mmc_chip_info = {
 	.enable_dma = 1,
@@ -226,6 +259,19 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 
+#if defined(CONFIG_NET_DSA_KSZ8893M) \
+	|| defined(CONFIG_NET_DSA_KSZ8893M_MODULE)
+	{
+		.modalias = "ksz8893m",
+		.max_speed_hz = 5000000,
+		.bus_num = 0,
+		.chip_select = 1,
+		.platform_data = NULL,
+		.controller_data = &spi_switch_info,
+		.mode = SPI_MODE_3,
+	},
+#endif
+
 #if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
 	{
 		.modalias = "spi_mmc_dummy",
@@ -473,7 +519,6 @@ static struct platform_device i2c_bfin_twi_device = {
 };
 #endif
 
-#ifdef CONFIG_I2C_BOARDINFO
 static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 #if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
 	{
@@ -487,7 +532,6 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 	},
 #endif
 };
-#endif
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
 static struct platform_device bfin_sport0_uart_device = {
@@ -584,9 +628,14 @@ static struct platform_device *stamp_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+	&bfin_mii_bus,
 	&bfin_mac_device,
 #endif
 
+#if defined(CONFIG_NET_DSA_KSZ8893M) || defined(CONFIG_NET_DSA_KSZ8893M_MODULE)
+	&ksz8893m_switch_device,
+#endif
+
 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 	&bfin_spi0_device,
 	&bfin_spi1_device,
@@ -632,12 +681,8 @@ static struct platform_device *stamp_devices[] __initdata = {
 static int __init ezbrd_init(void)
 {
 	printk(KERN_INFO "%s(): registering device resources\n", __func__);
-
-#ifdef CONFIG_I2C_BOARDINFO
 	i2c_register_board_info(0, bfin_i2c_board_info,
 				ARRAY_SIZE(bfin_i2c_board_info));
-#endif
-
 	platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
 	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
 	return 0;
@@ -649,7 +694,7 @@ void native_machine_restart(char *cmd)
 {
 	/* workaround reboot hang when booting from SPI */
 	if ((bfin_read_SYSCR() & 0x7) == 0x3)
-		bfin_gpio_reset_spi0_ssel1();
+		bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS);
 }
 
 void bfin_get_ether_addr(char *addr)

arch/blackfin/mach-bf518/include/mach/portmux.h

@@ -103,6 +103,8 @@
 #define P_SPI1_SSEL4	(P_DEFINED | P_IDENT(GPIO_PF8) | P_FUNCT(2))
 #define P_SPI1_SSEL5	(P_DEFINED | P_IDENT(GPIO_PG11) | P_FUNCT(2))
 
+#define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL2
+
 /* SPORT Port Mux */
 #define P_SPORT0_DRPRI	(P_DEFINED | P_IDENT(GPIO_PG3) | P_FUNCT(0))
 #define P_SPORT0_RSCLK	(P_DEFINED | P_IDENT(GPIO_PG4) | P_FUNCT(0))

arch/blackfin/mach-bf527/boards/cm_bf527.c

@@ -403,8 +403,13 @@ static struct platform_device isp1362_hcd_device = {
 #endif
 
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+static struct platform_device bfin_mii_bus = {
+	.name = "bfin_mii_bus",
+};
+
 static struct platform_device bfin_mac_device = {
 	.name = "bfin_mac",
+	.dev.platform_data = &bfin_mii_bus,
 };
 #endif
 
@@ -793,7 +798,6 @@ static struct platform_device i2c_bfin_twi_device = {
 };
 #endif
 
-#ifdef CONFIG_I2C_BOARDINFO
 static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 #if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
 	{
@@ -809,7 +813,6 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 	},
 #endif
 };
-#endif
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
 static struct platform_device bfin_sport0_uart_device = {
@@ -920,6 +923,7 @@ static struct platform_device *stamp_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+	&bfin_mii_bus,
 	&bfin_mac_device,
 #endif
 
@@ -968,27 +972,23 @@ static struct platform_device *stamp_devices[] __initdata = {
 	&bfin_gpios_device,
 };
 
-static int __init stamp_init(void)
+static int __init cm_init(void)
 {
 	printk(KERN_INFO "%s(): registering device resources\n", __func__);
-
-#ifdef CONFIG_I2C_BOARDINFO
 	i2c_register_board_info(0, bfin_i2c_board_info,
 				ARRAY_SIZE(bfin_i2c_board_info));
-#endif
-
 	platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
 	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
 	return 0;
 }
 
-arch_initcall(stamp_init);
+arch_initcall(cm_init);
 
 void native_machine_restart(char *cmd)
 {
 	/* workaround reboot hang when booting from SPI */
 	if ((bfin_read_SYSCR() & 0x7) == 0x3)
-		bfin_gpio_reset_spi0_ssel1();
+		bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS);
 }
 
 void bfin_get_ether_addr(char *addr)

arch/blackfin/mach-bf527/boards/ezbrd.c

@@ -208,8 +208,13 @@ static struct platform_device rtc_device = {
 
 
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+static struct platform_device bfin_mii_bus = {
+	.name = "bfin_mii_bus",
+};
+
 static struct platform_device bfin_mac_device = {
 	.name = "bfin_mac",
+	.dev.platform_data = &bfin_mii_bus,
 };
 #endif
 
@@ -590,7 +595,6 @@ static struct platform_device i2c_bfin_twi_device = {
 };
 #endif
 
-#ifdef CONFIG_I2C_BOARDINFO
 static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 #if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
 	{
@@ -604,7 +608,6 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 	},
 #endif
 };
-#endif
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
 static struct platform_device bfin_sport0_uart_device = {
@@ -720,6 +723,7 @@ static struct platform_device *stamp_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+	&bfin_mii_bus,
 	&bfin_mac_device,
 #endif
 
@@ -764,27 +768,23 @@ static struct platform_device *stamp_devices[] __initdata = {
 	&bfin_gpios_device,
 };
 
-static int __init stamp_init(void)
+static int __init ezbrd_init(void)
 {
 	printk(KERN_INFO "%s(): registering device resources\n", __func__);
-
-#ifdef CONFIG_I2C_BOARDINFO
 	i2c_register_board_info(0, bfin_i2c_board_info,
 				ARRAY_SIZE(bfin_i2c_board_info));
-#endif
-
 	platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
 	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
 	return 0;
 }
 
-arch_initcall(stamp_init);
+arch_initcall(ezbrd_init);
 
 void native_machine_restart(char *cmd)
 {
 	/* workaround reboot hang when booting from SPI */
 	if ((bfin_read_SYSCR() & 0x7) == 0x3)
-		bfin_gpio_reset_spi0_ssel1();
+		bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS);
 }
 
 void bfin_get_ether_addr(char *addr)

arch/blackfin/mach-bf527/boards/ezkit.c

@@ -425,8 +425,13 @@ static struct platform_device isp1362_hcd_device = {
 #endif
 
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+static struct platform_device bfin_mii_bus = {
+	.name = "bfin_mii_bus",
+};
+
 static struct platform_device bfin_mac_device = {
 	.name = "bfin_mac",
+	.dev.platform_data = &bfin_mii_bus,
 };
 #endif
 
@@ -830,7 +835,6 @@ static struct platform_device i2c_bfin_twi_device = {
 };
 #endif
 
-#ifdef CONFIG_I2C_BOARDINFO
 static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 #if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
 	{
@@ -844,7 +848,6 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 	},
 #endif
 };
-#endif
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
 static struct platform_device bfin_sport0_uart_device = {
@@ -988,6 +991,7 @@ static struct platform_device *stamp_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+	&bfin_mii_bus,
 	&bfin_mac_device,
 #endif
 
@@ -1048,27 +1052,23 @@ static struct platform_device *stamp_devices[] __initdata = {
 	&bfin_gpios_device,
 };
 
-static int __init stamp_init(void)
+static int __init ezkit_init(void)
 {
 	printk(KERN_INFO "%s(): registering device resources\n", __func__);
-
-#ifdef CONFIG_I2C_BOARDINFO
 	i2c_register_board_info(0, bfin_i2c_board_info,
 				ARRAY_SIZE(bfin_i2c_board_info));
-#endif
-
 	platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
 	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
 	return 0;
 }
 
-arch_initcall(stamp_init);
+arch_initcall(ezkit_init);
 
 void native_machine_restart(char *cmd)
 {
 	/* workaround reboot hang when booting from SPI */
 	if ((bfin_read_SYSCR() & 0x7) == 0x3)
-		bfin_gpio_reset_spi0_ssel1();
+		bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS);
 }
 
 void bfin_get_ether_addr(char *addr)

arch/blackfin/mach-bf527/include/mach/portmux.h

@@ -73,6 +73,8 @@
 
 #define P_HWAIT		(P_DONTCARE)
 
+#define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL1
+
 #define P_SPI0_SS	(P_DEFINED | P_IDENT(GPIO_PG1) | P_FUNCT(0))
 #define P_SPI0_SSEL1	(P_DEFINED | P_IDENT(GPIO_PG1) | P_FUNCT(2))
 #define P_SPI0_SCK	(P_DEFINED | P_IDENT(GPIO_PG2) | P_FUNCT(2))

arch/blackfin/mach-bf533/boards/blackstamp.c

@@ -309,10 +309,8 @@ static struct platform_device i2c_gpio_device = {
 };
 #endif
 
-#ifdef CONFIG_I2C_BOARDINFO
 static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 };
-#endif
 
 static const unsigned int cclk_vlev_datasheet[] =
 {
@@ -390,10 +388,8 @@ static int __init blackstamp_init(void)
 
 	printk(KERN_INFO "%s(): registering device resources\n", __func__);
 
-#ifdef CONFIG_I2C_BOARDINFO
 	i2c_register_board_info(0, bfin_i2c_board_info,
 				ARRAY_SIZE(bfin_i2c_board_info));
-#endif
 
 	ret = platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
 	if (ret < 0)

arch/blackfin/mach-bf533/boards/stamp.c

@@ -441,7 +441,6 @@ static struct platform_device i2c_gpio_device = {
 };
 #endif
 
-#ifdef CONFIG_I2C_BOARDINFO
 static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 #if defined(CONFIG_JOYSTICK_AD7142) || defined(CONFIG_JOYSTICK_AD7142_MODULE)
 	{
@@ -461,7 +460,6 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 	},
 #endif
 };
-#endif
 
 static const unsigned int cclk_vlev_datasheet[] =
 {
@@ -550,10 +548,8 @@ static int __init stamp_init(void)
 
 	printk(KERN_INFO "%s(): registering device resources\n", __func__);
 
-#ifdef CONFIG_I2C_BOARDINFO
 	i2c_register_board_info(0, bfin_i2c_board_info,
 				ARRAY_SIZE(bfin_i2c_board_info));
-#endif
 
 	ret = platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
 	if (ret < 0)

arch/blackfin/mach-bf533/include/mach/portmux.h

@@ -54,14 +54,11 @@
 #define P_SPI0_SSEL2	(P_DEFINED | P_IDENT(GPIO_PF2))
 #define P_SPI0_SSEL1	(P_DEFINED | P_IDENT(GPIO_PF1))
 #define P_SPI0_SS	(P_DEFINED | P_IDENT(GPIO_PF0))
+#define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL2
 
 #define P_TMR2		(P_DONTCARE)
 #define P_TMR1		(P_DONTCARE)
 #define P_TMR0		(P_DONTCARE)
 #define P_TMRCLK	(P_DEFINED | P_IDENT(GPIO_PF1))
 
-
-
-
-
 #endif /* _MACH_PORTMUX_H_ */

arch/blackfin/mach-bf537/boards/cm_bf537.c

@@ -479,8 +479,13 @@ static struct platform_device bfin_sport1_uart_device = {
 #endif
 
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+static struct platform_device bfin_mii_bus = {
+	.name = "bfin_mii_bus",
+};
+
 static struct platform_device bfin_mac_device = {
 	.name = "bfin_mac",
+	.dev.platform_data = &bfin_mii_bus,
 };
 #endif
 
@@ -591,6 +596,7 @@ static struct platform_device *cm_bf537_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+	&bfin_mii_bus,
 	&bfin_mac_device,
 #endif
 

arch/blackfin/mach-bf537/boards/generic_board.c

@@ -262,8 +262,13 @@ static struct platform_device isp1362_hcd_device = {
 #endif
 
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+static struct platform_device bfin_mii_bus = {
+	.name = "bfin_mii_bus",
+};
+
 static struct platform_device bfin_mac_device = {
 	.name = "bfin_mac",
+	.dev.platform_data = &bfin_mii_bus,
 };
 #endif
 
@@ -662,6 +667,7 @@ static struct platform_device *stamp_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+	&bfin_mii_bus,
 	&bfin_mac_device,
 #endif
 
@@ -708,7 +714,7 @@ static struct platform_device *stamp_devices[] __initdata = {
 #endif
 };
 
-static int __init stamp_init(void)
+static int __init generic_init(void)
 {
 	printk(KERN_INFO "%s(): registering device resources\n", __func__);
 	platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
@@ -720,13 +726,13 @@ static int __init stamp_init(void)
 	return 0;
 }
 
-arch_initcall(stamp_init);
+arch_initcall(generic_init);
 
 void native_machine_restart(char *cmd)
 {
 	/* workaround reboot hang when booting from SPI */
 	if ((bfin_read_SYSCR() & 0x7) == 0x3)
-		bfin_gpio_reset_spi0_ssel1();
+		bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS);
 }
 
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)

arch/blackfin/mach-bf537/boards/minotaur.c

@@ -61,8 +61,13 @@ static struct platform_device rtc_device = {
 #endif
 
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+static struct platform_device bfin_mii_bus = {
+	.name = "bfin_mii_bus",
+};
+
 static struct platform_device bfin_mac_device = {
 	.name = "bfin_mac",
+	.dev.platform_data = &bfin_mii_bus,
 };
 #endif
 
@@ -324,6 +329,7 @@ static struct platform_device *minotaur_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+	&bfin_mii_bus,
 	&bfin_mac_device,
 #endif
 
@@ -377,5 +383,5 @@ void native_machine_restart(char *cmd)
 {
 	/* workaround reboot hang when booting from SPI */
 	if ((bfin_read_SYSCR() & 0x7) == 0x3)
-		bfin_gpio_reset_spi0_ssel1();
+		bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS);
 }

arch/blackfin/mach-bf537/boards/pnav10.c

@@ -198,8 +198,13 @@ static struct platform_device isp1362_hcd_device = {
 #endif
 
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+static struct platform_device bfin_mii_bus = {
+	.name = "bfin_mii_bus",
+};
+
 static struct platform_device bfin_mac_device = {
 	.name = "bfin_mac",
+	.dev.platform_data = &bfin_mii_bus,
 };
 #endif
 
@@ -529,6 +534,7 @@ static struct platform_device *stamp_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+	&bfin_mii_bus,
 	&bfin_mac_device,
 #endif
 
@@ -558,7 +564,7 @@ static struct platform_device *stamp_devices[] __initdata = {
 #endif
 };
 
-static int __init stamp_init(void)
+static int __init pnav_init(void)
 {
 	printk(KERN_INFO "%s(): registering device resources\n", __func__);
 	platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
@@ -569,7 +575,7 @@ static int __init stamp_init(void)
 	return 0;
 }
 
-arch_initcall(stamp_init);
+arch_initcall(pnav_init);
 
 void bfin_get_ether_addr(char *addr)
 {

arch/blackfin/mach-bf537/boards/stamp.c

@@ -321,8 +321,13 @@ static struct platform_device isp1362_hcd_device = {
 #endif
 
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+static struct platform_device bfin_mii_bus = {
+	.name = "bfin_mii_bus",
+};
+
 static struct platform_device bfin_mac_device = {
 	.name = "bfin_mac",
+	.dev.platform_data = &bfin_mii_bus,
 };
 #endif
 
@@ -1068,7 +1073,6 @@ static struct adp5588_kpad_platform_data adp5588_kpad_data = {
 };
 #endif
 
-#ifdef CONFIG_I2C_BOARDINFO
 static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 #if defined(CONFIG_JOYSTICK_AD7142) || defined(CONFIG_JOYSTICK_AD7142_MODULE)
 	{
@@ -1102,7 +1106,6 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 	},
 #endif
 };
-#endif
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
 static struct platform_device bfin_sport0_uart_device = {
@@ -1217,6 +1220,7 @@ static struct platform_device *stamp_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+	&bfin_mii_bus,
 	&bfin_mac_device,
 #endif
 
@@ -1284,12 +1288,8 @@ static struct platform_device *stamp_devices[] __initdata = {
 static int __init stamp_init(void)
 {
 	printk(KERN_INFO "%s(): registering device resources\n", __func__);
-
-#ifdef CONFIG_I2C_BOARDINFO
 	i2c_register_board_info(0, bfin_i2c_board_info,
 				ARRAY_SIZE(bfin_i2c_board_info));
-#endif
-
 	bfin_plat_nand_init();
 	platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
 	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
@@ -1307,7 +1307,7 @@ void native_machine_restart(char *cmd)
 {
 	/* workaround reboot hang when booting from SPI */
 	if ((bfin_read_SYSCR() & 0x7) == 0x3)
-		bfin_gpio_reset_spi0_ssel1();
+		bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS);
 }
 
 /*

arch/blackfin/mach-bf537/boards/tcm_bf537.c

@@ -481,8 +481,13 @@ static struct platform_device bfin_sport1_uart_device = {
 #endif
 
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+static struct platform_device bfin_mii_bus = {
+	.name = "bfin_mii_bus",
+};
+
 static struct platform_device bfin_mac_device = {
 	.name = "bfin_mac",
+	.dev.platform_data = &bfin_mii_bus,
 };
 #endif
 
@@ -593,6 +598,7 @@ static struct platform_device *cm_bf537_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+	&bfin_mii_bus,
 	&bfin_mac_device,
 #endif
 
@@ -615,7 +621,7 @@ static struct platform_device *cm_bf537_devices[] __initdata = {
 	&bfin_gpios_device,
 };
 
-static int __init cm_bf537_init(void)
+static int __init tcm_bf537_init(void)
 {
 	printk(KERN_INFO "%s(): registering device resources\n", __func__);
 	platform_add_devices(cm_bf537_devices, ARRAY_SIZE(cm_bf537_devices));
@@ -629,7 +635,7 @@ static int __init cm_bf537_init(void)
 	return 0;
 }
 
-arch_initcall(cm_bf537_init);
+arch_initcall(tcm_bf537_init);
 
 void bfin_get_ether_addr(char *addr)
 {

arch/blackfin/mach-bf537/include/mach/portmux.h

@@ -31,6 +31,7 @@
 #define P_PPI0_FS1	(P_DEFINED | P_IDENT(GPIO_PF9) | P_FUNCT(1))
 #define P_TACLK0	(P_DEFINED | P_IDENT(GPIO_PF14) | P_FUNCT(1))
 #define P_TMRCLK	(P_DEFINED | P_IDENT(GPIO_PF15) | P_FUNCT(1))
+#define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL1
 
 #define P_PPI0_D0	(P_DEFINED | P_IDENT(GPIO_PG0) | P_FUNCT(0))
 #define P_PPI0_D1	(P_DEFINED | P_IDENT(GPIO_PG1) | P_FUNCT(0))

arch/blackfin/mach-bf538/include/mach/portmux.h

@@ -102,5 +102,6 @@
 #define P_SPI0_SSEL2	(P_DEFINED | P_IDENT(GPIO_PF2))
 #define P_SPI0_SSEL1	(P_DEFINED | P_IDENT(GPIO_PF1))
 #define P_SPI0_SS	(P_DEFINED | P_IDENT(GPIO_PF0))
+#define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL2
 
 #endif /* _MACH_PORTMUX_H_ */

arch/blackfin/mach-bf548/boards/ezkit.c

@@ -781,7 +781,6 @@ static struct platform_device i2c_bfin_twi1_device = {
 #endif
 #endif
 
-#ifdef CONFIG_I2C_BOARDINFO
 static struct i2c_board_info __initdata bfin_i2c_board_info0[] = {
 };
 
@@ -800,7 +799,6 @@ static struct i2c_board_info __initdata bfin_i2c_board_info1[] = {
 #endif
 };
 #endif
-#endif
 
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 #include <linux/gpio_keys.h>
@@ -956,13 +954,11 @@ static int __init ezkit_init(void)
 {
 	printk(KERN_INFO "%s(): registering device resources\n", __func__);
 
-#ifdef CONFIG_I2C_BOARDINFO
 	i2c_register_board_info(0, bfin_i2c_board_info0,
 				ARRAY_SIZE(bfin_i2c_board_info0));
 #if !defined(CONFIG_BF542)	/* The BF542 only has 1 TWI */
 	i2c_register_board_info(1, bfin_i2c_board_info1,
 				ARRAY_SIZE(bfin_i2c_board_info1));
-#endif
 #endif
 
 	platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices));

arch/blackfin/mach-bf548/include/mach/anomaly.h

@@ -175,6 +175,7 @@
 #define ANOMALY_05000311 (0)
 #define ANOMALY_05000323 (0)
 #define ANOMALY_05000363 (0)
+#define ANOMALY_05000380 (0)
 #define ANOMALY_05000412 (0)
 #define ANOMALY_05000432 (0)
 #define ANOMALY_05000435 (0)

arch/blackfin/mach-bf548/include/mach/bf548.h

@@ -104,6 +104,18 @@
 
 #define AMGCTLVAL	(V_AMBEN | V_AMCKEN)
 
+#if defined(CONFIG_BF542M)
+# define CONFIG_BF542
+#elif defined(CONFIG_BF544M)
+# define CONFIG_BF544
+#elif defined(CONFIG_BF547M)
+# define CONFIG_BF547
+#elif defined(CONFIG_BF548M)
+# define CONFIG_BF548
+#elif defined(CONFIG_BF549M)
+# define CONFIG_BF549
+#endif
+
 #if defined(CONFIG_BF542)
 # define CPU   "BF542"
 # define CPUID 0x27de

arch/blackfin/mach-bf548/include/mach/gpio.h

@@ -195,17 +195,17 @@
 struct gpio_port_t {
 	unsigned short port_fer;
 	unsigned short dummy1;
-	unsigned short port_data;
+	unsigned short data;
 	unsigned short dummy2;
-	unsigned short port_set;
+	unsigned short data_set;
 	unsigned short dummy3;
-	unsigned short port_clear;
+	unsigned short data_clear;
 	unsigned short dummy4;
-	unsigned short port_dir_set;
+	unsigned short dir_set;
 	unsigned short dummy5;
-	unsigned short port_dir_clear;
+	unsigned short dir_clear;
 	unsigned short dummy6;
-	unsigned short port_inen;
+	unsigned short inen;
 	unsigned short dummy7;
 	unsigned int port_mux;
 };

arch/blackfin/mach-bf548/include/mach/portmux.h

@@ -125,6 +125,7 @@
 #define P_KEY_COL2	(P_DEFINED | P_IDENT(GPIO_PD14) | P_FUNCT(3))
 #define P_KEY_COL3	(P_DEFINED | P_IDENT(GPIO_PD15) | P_FUNCT(3))
 
+#define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL1
 #define P_SPI0_SCK	(P_DEFINED | P_IDENT(GPIO_PE0) | P_FUNCT(0))
 #define P_SPI0_MISO	(P_DEFINED | P_IDENT(GPIO_PE1) | P_FUNCT(0))
 #define P_SPI0_MOSI	(P_DEFINED | P_IDENT(GPIO_PE2) | P_FUNCT(0))

arch/blackfin/mach-bf561/include/mach/defBF561.h

@@ -1106,6 +1106,8 @@
 #define DLEN_8		     0x0	/* PPI Data Length mask for DLEN=8 */
 #define DLEN(x)	(((x-9) & 0x07) << 11)	/* PPI Data Length (only works for x=10-->x=16) */
 #define POL                  0x0000C000	/* PPI Signal Polarities       */
+#define	POLC		0x4000		/* PPI Clock Polarity */
+#define	POLS		0x8000		/* PPI Frame Sync Polarity */
 
 /* PPI_STATUS Masks */
 #define FLD	             0x00000400	/* Field Indicator   */

arch/blackfin/mach-bf561/include/mach/portmux.h

@@ -85,5 +85,6 @@
 #define P_SPI0_MOSI	(P_DONTCARE)
 #define P_SPI0_MISO	(P_DONTCARE)
 #define P_SPI0_SCK	(P_DONTCARE)
+#define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL2
 
 #endif /* _MACH_PORTMUX_H_ */

arch/blackfin/mach-common/clocks-init.c

@@ -14,6 +14,7 @@
 #include <asm/clocks.h>
 #include <asm/mem_init.h>
 
+#define SDGCTL_WIDTH (1 << 31)	/* SDRAM external data path width */
 #define PLL_CTL_VAL \
 	(((CONFIG_VCO_MULT & 63) << 9) | CLKIN_HALF | \
 	 (PLL_BYPASS << 8) | (ANOMALY_05000265 ? 0x8000 : 0))
@@ -76,7 +77,7 @@ void init_clocks(void)
 	bfin_write_PLL_DIV(CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV);
 #ifdef EBIU_SDGCTL
 	bfin_write_EBIU_SDRRC(mem_SDRRC);
-	bfin_write_EBIU_SDGCTL(mem_SDGCTL);
+	bfin_write_EBIU_SDGCTL((bfin_read_EBIU_SDGCTL() & SDGCTL_WIDTH) | mem_SDGCTL);
 #else
 	bfin_write_EBIU_RSTCTL(bfin_read_EBIU_RSTCTL() & ~(SRREQ));
 	do_sync();

arch/blackfin/mach-common/entry.S

@@ -151,13 +151,6 @@ ENTRY(_ex_syscall)
 	jump.s _bfin_return_from_exception;
 ENDPROC(_ex_syscall)
 
-ENTRY(_ex_soft_bp)
-	r7 = retx;
-	r7 += -2;
-	retx = r7;
-	jump.s _ex_trap_c;
-ENDPROC(_ex_soft_bp)
-
 ENTRY(_ex_single_step)
 	/* If we just returned from an interrupt, the single step event is
 	   for the RTI instruction.  */
@@ -1087,7 +1080,7 @@ ENTRY(_ex_table)
 	 * EXCPT instruction can provide 4 bits of EXCAUSE, allowing 16 to be user defined
 	 */
 	.long _ex_syscall       /* 0x00 - User Defined - Linux Syscall */
-	.long _ex_soft_bp       /* 0x01 - User Defined - Software breakpoint */
+	.long _ex_trap_c        /* 0x01 - User Defined - Software breakpoint */
 #ifdef	CONFIG_KGDB
 	.long _ex_trap_c	/* 0x02 - User Defined - KGDB initial connection
 							 and break signal trap */

arch/blackfin/mach-common/head.S

@@ -17,6 +17,19 @@
 
 __INIT
 
+ENTRY(__init_clear_bss)
+	r2 = r2 - r1;
+	cc = r2 == 0;
+	if cc jump .L_bss_done;
+	r2 >>= 2;
+	p1 = r1;
+	p2 = r2;
+	lsetup (1f, 1f) lc0 = p2;
+1:	[p1++] = r0;
+.L_bss_done:
+	rts;
+ENDPROC(__init_clear_bss)
+
 #define INITIAL_STACK	(L1_SCRATCH_START + L1_SCRATCH_LENGTH - 12)
 
 ENTRY(__start)
@@ -144,6 +157,35 @@ ENTRY(__start)
 	call _init_early_exception_vectors;
 #endif
 
+	r0 = 0 (x);
+	/* Zero out all of the fun bss regions */
+#if L1_DATA_A_LENGTH > 0
+	r1.l = __sbss_l1;
+	r1.h = __sbss_l1;
+	r2.l = __ebss_l1;
+	r2.h = __ebss_l1;
+	call __init_clear_bss
+#endif
+#if L1_DATA_B_LENGTH > 0
+	r1.l = __sbss_b_l1;
+	r1.h = __sbss_b_l1;
+	r2.l = __ebss_b_l1;
+	r2.h = __ebss_b_l1;
+	call __init_clear_bss
+#endif
+#if L2_LENGTH > 0
+	r1.l = __sbss_l2;
+	r1.h = __sbss_l2;
+	r2.l = __ebss_l2;
+	r2.h = __ebss_l2;
+	call __init_clear_bss
+#endif
+	r1.l = ___bss_start;
+	r1.h = ___bss_start;
+	r2.l = ___bss_stop;
+	r2.h = ___bss_stop;
+	call __init_clear_bss
+
 	/* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */
 	call _bfin_relocate_l1_mem;
 #ifdef CONFIG_BFIN_KERNEL_CLOCK
@@ -185,19 +227,6 @@ ENDPROC(__start)
 # define WDOG_CTL WDOGA_CTL
 #endif
 
-ENTRY(__init_clear_bss)
-	r2 = r2 - r1;
-	cc = r2 == 0;
-	if cc jump .L_bss_done;
-	r2 >>= 2;
-	p1 = r1;
-	p2 = r2;
-	lsetup (1f, 1f) lc0 = p2;
-1:	[p1++] = r0;
-.L_bss_done:
-	rts;
-ENDPROC(__init_clear_bss)
-
 ENTRY(_real_start)
 	/* Enable nested interrupts */
 	[--sp] = reti;
@@ -209,35 +238,6 @@ ENTRY(_real_start)
 	w[p0] = r0;
 	ssync;
 
-	r0 = 0 (x);
-	/* Zero out all of the fun bss regions */
-#if L1_DATA_A_LENGTH > 0
-	r1.l = __sbss_l1;
-	r1.h = __sbss_l1;
-	r2.l = __ebss_l1;
-	r2.h = __ebss_l1;
-	call __init_clear_bss
-#endif
-#if L1_DATA_B_LENGTH > 0
-	r1.l = __sbss_b_l1;
-	r1.h = __sbss_b_l1;
-	r2.l = __ebss_b_l1;
-	r2.h = __ebss_b_l1;
-	call __init_clear_bss
-#endif
-#if L2_LENGTH > 0
-	r1.l = __sbss_l2;
-	r1.h = __sbss_l2;
-	r2.l = __ebss_l2;
-	r2.h = __ebss_l2;
-	call __init_clear_bss
-#endif
-	r1.l = ___bss_start;
-	r1.h = ___bss_start;
-	r2.l = ___bss_stop;
-	r2.h = ___bss_stop;
-	call __init_clear_bss
-
 	/* Pass the u-boot arguments to the global value command line */
 	R0 = R7;
 	call _cmdline_init;

arch/blackfin/mach-common/interrupt.S

@@ -195,7 +195,7 @@ ENDPROC(_evt_ivhw)
 /* Interrupt routine for evt2 (NMI).
  * We don't actually use this, so just return.
  * For inner circle type details, please see:
- * http://docs.blackfin.uclinux.org/doku.php?id=linux:nmi
+ * http://docs.blackfin.uclinux.org/doku.php?id=linux-kernel:nmi
  */
 ENTRY(_evt_nmi)
 .weak _evt_nmi

arch/blackfin/mach-common/ints-priority.c

@@ -1101,10 +1101,9 @@ int __init init_arch_irq(void)
 	    IMASK_IVG14 | IMASK_IVG13 | IMASK_IVG12 | IMASK_IVG11 |
 	    IMASK_IVG10 | IMASK_IVG9 | IMASK_IVG8 | IMASK_IVG7 | IMASK_IVGHW;
 
-#if defined(CONFIG_BF54x) || defined(CONFIG_BF52x) || defined(CONFIG_BF561) \
-	|| defined(BF538_FAMILY) || defined(CONFIG_BF51x)
+#ifdef SIC_IWR0
 	bfin_write_SIC_IWR0(IWR_DISABLE_ALL);
-#if defined(CONFIG_BF52x) || defined(CONFIG_BF51x)
+# ifdef SIC_IWR1
 	/* BF52x/BF51x system reset does not properly reset SIC_IWR1 which
 	 * will screw up the bootrom as it relies on MDMA0/1 waking it
 	 * up from IDLE instructions.  See this report for more info:
@@ -1114,10 +1113,8 @@ int __init init_arch_irq(void)
 		bfin_write_SIC_IWR1(IWR_ENABLE(10) | IWR_ENABLE(11));
 	else
 		bfin_write_SIC_IWR1(IWR_DISABLE_ALL);
-#else
-	bfin_write_SIC_IWR1(IWR_DISABLE_ALL);
-#endif
-# ifdef CONFIG_BF54x
+# endif
+# ifdef SIC_IWR2
 	bfin_write_SIC_IWR2(IWR_DISABLE_ALL);
 # endif
 #else

arch/blackfin/mach-common/pm.c

@@ -82,10 +82,9 @@ void bfin_pm_suspend_standby_enter(void)
 
 	bfin_pm_standby_restore();
 
-#if defined(CONFIG_BF54x) || defined(CONFIG_BF52x)  || defined(CONFIG_BF561) || \
-	defined(CONFIG_BF538) || defined(CONFIG_BF539) || defined(CONFIG_BF51x)
+#ifdef SIC_IWR0
 	bfin_write_SIC_IWR0(IWR_DISABLE_ALL);
-#if defined(CONFIG_BF52x) || defined(CONFIG_BF51x)
+# ifdef SIC_IWR1
 	/* BF52x system reset does not properly reset SIC_IWR1 which
 	 * will screw up the bootrom as it relies on MDMA0/1 waking it
 	 * up from IDLE instructions.  See this report for more info:
@@ -95,10 +94,8 @@ void bfin_pm_suspend_standby_enter(void)
 		bfin_write_SIC_IWR1(IWR_ENABLE(10) | IWR_ENABLE(11));
 	else
 		bfin_write_SIC_IWR1(IWR_DISABLE_ALL);
-#else
-	bfin_write_SIC_IWR1(IWR_DISABLE_ALL);
-#endif
-# ifdef CONFIG_BF54x
+# endif
+# ifdef SIC_IWR2
 	bfin_write_SIC_IWR2(IWR_DISABLE_ALL);
 # endif
 #else

arch/ia64/sn/kernel/io_acpi_init.c

@@ -443,7 +443,7 @@ sn_acpi_slot_fixup(struct pci_dev *dev)
 		size = pci_resource_len(dev, PCI_ROM_RESOURCE);
 		addr = ioremap(pcidev_info->pdi_pio_mapped_addr[PCI_ROM_RESOURCE],
 			       size);
-		image_size = pci_get_rom_size(addr, size);
+		image_size = pci_get_rom_size(dev, addr, size);
 		dev->resource[PCI_ROM_RESOURCE].start = (unsigned long) addr;
 		dev->resource[PCI_ROM_RESOURCE].end =
 					(unsigned long) addr + image_size - 1;

arch/ia64/sn/kernel/io_init.c

@@ -269,7 +269,7 @@ sn_io_slot_fixup(struct pci_dev *dev)
 
 			rom = ioremap(pci_resource_start(dev, PCI_ROM_RESOURCE),
 				      size + 1);
-			image_size = pci_get_rom_size(rom, size + 1);
+			image_size = pci_get_rom_size(dev, rom, size + 1);
 			dev->resource[PCI_ROM_RESOURCE].end =
 				dev->resource[PCI_ROM_RESOURCE].start +
 				image_size - 1;

arch/sh/boards/board-ap325rxa.c

@@ -22,6 +22,7 @@
 #include <linux/gpio.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/spi_gpio.h>
+#include <media/ov772x.h>
 #include <media/soc_camera_platform.h>
 #include <media/sh_mobile_ceu.h>
 #include <video/sh_mobile_lcdc.h>
@@ -216,7 +217,14 @@ static struct platform_device lcdc_device = {
 	},
 };
 
+static void camera_power(int val)
+{
+	gpio_set_value(GPIO_PTZ5, val); /* RST_CAM/RSTB */
+	mdelay(10);
+}
+
 #ifdef CONFIG_I2C
+/* support for the old ncm03j camera */
 static unsigned char camera_ncm03j_magic[] =
 {
 	0x87, 0x00, 0x88, 0x08, 0x89, 0x01, 0x8A, 0xE8,
@@ -237,6 +245,23 @@ static unsigned char camera_ncm03j_magic[] =
 	0x63, 0xD4, 0x64, 0xEA, 0xD6, 0x0F,
 };
 
+static int camera_probe(void)
+{
+	struct i2c_adapter *a = i2c_get_adapter(0);
+	struct i2c_msg msg;
+	int ret;
+
+	camera_power(1);
+	msg.addr = 0x6e;
+	msg.buf = camera_ncm03j_magic;
+	msg.len = 2;
+	msg.flags = 0;
+	ret = i2c_transfer(a, &msg, 1);
+	camera_power(0);
+
+	return ret;
+}
+
 static int camera_set_capture(struct soc_camera_platform_info *info,
 			      int enable)
 {
@@ -245,9 +270,11 @@ static int camera_set_capture(struct soc_camera_platform_info *info,
 	int ret = 0;
 	int i;
 
+	camera_power(0);
 	if (!enable)
 		return 0; /* no disable for now */
 
+	camera_power(1);
 	for (i = 0; i < ARRAY_SIZE(camera_ncm03j_magic); i += 2) {
 		u_int8_t buf[8];
 
@@ -286,8 +313,35 @@ static struct platform_device camera_device = {
 		.platform_data	= &camera_info,
 	},
 };
+
+static int __init camera_setup(void)
+{
+	if (camera_probe() > 0)
+		platform_device_register(&camera_device);
+
+	return 0;
+}
+late_initcall(camera_setup);
+
 #endif /* CONFIG_I2C */
 
+static int ov7725_power(struct device *dev, int mode)
+{
+	camera_power(0);
+	if (mode)
+		camera_power(1);
+
+	return 0;
+}
+
+static struct ov772x_camera_info ov7725_info = {
+	.buswidth  = SOCAM_DATAWIDTH_8,
+	.flags = OV772X_FLAG_VFLIP | OV772X_FLAG_HFLIP,
+	.link = {
+		.power  = ov7725_power,
+	},
+};
+
 static struct sh_mobile_ceu_info sh_mobile_ceu_info = {
 	.flags = SOCAM_PCLK_SAMPLE_RISING | SOCAM_HSYNC_ACTIVE_HIGH |
 	SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_MASTER | SOCAM_DATAWIDTH_8,
@@ -338,9 +392,6 @@ static struct platform_device *ap325rxa_devices[] __initdata = {
 	&ap325rxa_nor_flash_device,
 	&lcdc_device,
 	&ceu_device,
-#ifdef CONFIG_I2C
-	&camera_device,
-#endif
 	&nand_flash_device,
 	&sdcard_cn3_device,
 };
@@ -349,6 +400,10 @@ static struct i2c_board_info __initdata ap325rxa_i2c_devices[] = {
 	{
 		I2C_BOARD_INFO("pcf8563", 0x51),
 	},
+	{
+		I2C_BOARD_INFO("ov772x", 0x21),
+		.platform_data = &ov7725_info,
+	},
 };
 
 static struct spi_board_info ap325rxa_spi_devices[] = {
@@ -426,7 +481,7 @@ static int __init ap325rxa_devices_setup(void)
 	gpio_request(GPIO_PTZ6, NULL);
 	gpio_direction_output(GPIO_PTZ6, 0); /* STBY_CAM */
 	gpio_request(GPIO_PTZ5, NULL);
-	gpio_direction_output(GPIO_PTZ5, 1); /* RST_CAM */
+	gpio_direction_output(GPIO_PTZ5, 0); /* RST_CAM */
 	gpio_request(GPIO_PTZ4, NULL);
 	gpio_direction_output(GPIO_PTZ4, 0); /* SADDR */
 

arch/sh/configs/ap325rxa_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28
-# Fri Jan  9 16:54:19 2009
+# Linux kernel version: 2.6.29-rc2
+# Tue Jan 27 11:45:08 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -45,12 +45,12 @@ CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -378,6 +378,7 @@ CONFIG_WIRELESS=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -400,6 +401,7 @@ CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_AR7_PARTS is not set
@@ -447,9 +449,7 @@ CONFIG_MTD_CFI_UTIL=y
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0xffffffff
-CONFIG_MTD_PHYSMAP_LEN=0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=0
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
 # CONFIG_MTD_PLATRAM is not set
 
 #
@@ -479,6 +479,12 @@ CONFIG_MTD_NAND_IDS=y
 CONFIG_MTD_NAND_SH_FLCTL=y
 # CONFIG_MTD_ONENAND is not set
 
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
 #
 # UBI - Unsorted block images
 #
@@ -607,6 +613,10 @@ CONFIG_SMSC911X=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -790,6 +800,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
 # CONFIG_REGULATOR is not set
 
 #
@@ -837,7 +848,7 @@ CONFIG_SOC_CAMERA=y
 # CONFIG_SOC_CAMERA_MT9V022 is not set
 # CONFIG_SOC_CAMERA_TW9910 is not set
 CONFIG_SOC_CAMERA_PLATFORM=y
-# CONFIG_SOC_CAMERA_OV772X is not set
+CONFIG_SOC_CAMERA_OV772X=y
 CONFIG_VIDEO_SH_MOBILE_CEU=y
 # CONFIG_RADIO_ADAPTERS is not set
 # CONFIG_DAB is not set
@@ -1012,6 +1023,7 @@ CONFIG_FS_POSIX_ACL=y
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1060,6 +1072,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_JFFS2_FS is not set
 # CONFIG_UBIFS_FS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set

arch/sh/configs/migor_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28
-# Fri Jan  9 17:09:35 2009
+# Linux kernel version: 2.6.29-rc1
+# Thu Jan 22 09:16:16 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -45,8 +45,12 @@ CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
+
+#
+# Control Group support
+#
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -389,6 +393,7 @@ CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
 # CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -411,6 +416,7 @@ CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_AR7_PARTS is not set
@@ -458,9 +464,7 @@ CONFIG_MTD_CFI_UTIL=y
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0xffffffff
-CONFIG_MTD_PHYSMAP_LEN=0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=0
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
 # CONFIG_MTD_PLATRAM is not set
 
 #
@@ -487,6 +491,12 @@ CONFIG_MTD_NAND_IDS=y
 CONFIG_MTD_NAND_PLATFORM=y
 # CONFIG_MTD_ONENAND is not set
 
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
 #
 # UBI - Unsorted block images
 #
@@ -587,6 +597,10 @@ CONFIG_SMC91X=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -761,6 +775,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
 # CONFIG_REGULATOR is not set
 
 #
@@ -806,9 +821,9 @@ CONFIG_SOC_CAMERA=y
 # CONFIG_SOC_CAMERA_MT9M111 is not set
 # CONFIG_SOC_CAMERA_MT9T031 is not set
 # CONFIG_SOC_CAMERA_MT9V022 is not set
-# CONFIG_SOC_CAMERA_TW9910 is not set
-CONFIG_SOC_CAMERA_PLATFORM=y
-# CONFIG_SOC_CAMERA_OV772X is not set
+CONFIG_SOC_CAMERA_TW9910=y
+# CONFIG_SOC_CAMERA_PLATFORM is not set
+CONFIG_SOC_CAMERA_OV772X=y
 CONFIG_VIDEO_SH_MOBILE_CEU=y
 # CONFIG_RADIO_ADAPTERS is not set
 # CONFIG_DAB is not set
@@ -866,11 +881,13 @@ CONFIG_USB_GADGET_SELECTED=y
 # CONFIG_USB_GADGET_PXA25X is not set
 # CONFIG_USB_GADGET_PXA27X is not set
 # CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_IMX is not set
 CONFIG_USB_GADGET_M66592=y
 CONFIG_USB_M66592=y
 CONFIG_SUPERH_BUILT_IN_M66592=y
 # CONFIG_USB_GADGET_AMD5536UDC is not set
 # CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
 # CONFIG_USB_GADGET_NET2280 is not set
 # CONFIG_USB_GADGET_GOKU is not set
 # CONFIG_USB_GADGET_DUMMY_HCD is not set
@@ -883,6 +900,11 @@ CONFIG_USB_G_SERIAL=y
 # CONFIG_USB_MIDI_GADGET is not set
 # CONFIG_USB_G_PRINTER is not set
 # CONFIG_USB_CDC_COMPOSITE is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -961,6 +983,7 @@ CONFIG_UIO_PDRV_GENIRQ=y
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
 # CONFIG_QUOTA is not set
@@ -1004,6 +1027,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS2_FS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set

arch/sh/include/asm/mutex-llsc.h

@@ -21,38 +21,36 @@
 static inline void
 __mutex_fastpath_lock(atomic_t *count, void (*fail_fn)(atomic_t *))
 {
-	int __ex_flag, __res;
+	int __done, __res;
 
 	__asm__ __volatile__ (
 		"movli.l	@%2, %0	\n"
 		"add		#-1, %0	\n"
 		"movco.l	%0, @%2	\n"
 		"movt		%1	\n"
-		: "=&z" (__res), "=&r" (__ex_flag)
+		: "=&z" (__res), "=&r" (__done)
 		: "r" (&(count)->counter)
 		: "t");
 
-	__res |= !__ex_flag;
-	if (unlikely(__res != 0))
+	if (unlikely(!__done || __res != 0))
 		fail_fn(count);
 }
 
 static inline int
 __mutex_fastpath_lock_retval(atomic_t *count, int (*fail_fn)(atomic_t *))
 {
-	int __ex_flag, __res;
+	int __done, __res;
 
 	__asm__ __volatile__ (
 		"movli.l	@%2, %0	\n"
 		"add		#-1, %0	\n"
 		"movco.l	%0, @%2	\n"
 		"movt		%1	\n"
-		: "=&z" (__res), "=&r" (__ex_flag)
+		: "=&z" (__res), "=&r" (__done)
 		: "r" (&(count)->counter)
 		: "t");
 
-	__res |= !__ex_flag;
-	if (unlikely(__res != 0))
+	if (unlikely(!__done || __res != 0))
 		__res = fail_fn(count);
 
 	return __res;
@@ -61,19 +59,18 @@ __mutex_fastpath_lock_retval(atomic_t *count, int (*fail_fn)(atomic_t *))
 static inline void
 __mutex_fastpath_unlock(atomic_t *count, void (*fail_fn)(atomic_t *))
 {
-	int __ex_flag, __res;
+	int __done, __res;
 
 	__asm__ __volatile__ (
 		"movli.l	@%2, %0	\n\t"
 		"add		#1, %0	\n\t"
 		"movco.l	%0, @%2 \n\t"
 		"movt		%1	\n\t"
-		: "=&z" (__res), "=&r" (__ex_flag)
+		: "=&z" (__res), "=&r" (__done)
 		: "r" (&(count)->counter)
 		: "t");
 
-	__res |= !__ex_flag;
-	if (unlikely(__res <= 0))
+	if (unlikely(!__done || __res <= 0))
 		fail_fn(count);
 }
 

arch/sh/include/asm/syscall_32.h

@@ -21,23 +21,10 @@ static inline void syscall_rollback(struct task_struct *task,
 	 */
 }
 
-static inline bool syscall_has_error(struct pt_regs *regs)
-{
-	return (regs->sr & 0x1) ? true : false;
-}
-static inline void syscall_set_error(struct pt_regs *regs)
-{
-	regs->sr |= 0x1;
-}
-static inline void syscall_clear_error(struct pt_regs *regs)
-{
-	regs->sr &= ~0x1;
-}
-
 static inline long syscall_get_error(struct task_struct *task,
 				     struct pt_regs *regs)
 {
-	return syscall_has_error(regs) ? regs->regs[0] : 0;
+	return IS_ERR_VALUE(regs->regs[0]) ? regs->regs[0] : 0;
 }
 
 static inline long syscall_get_return_value(struct task_struct *task,
@@ -50,13 +37,10 @@ static inline void syscall_set_return_value(struct task_struct *task,
 					    struct pt_regs *regs,
 					    int error, long val)
 {
-	if (error) {
-		syscall_set_error(regs);
+	if (error)
 		regs->regs[0] = -error;
-	} else {
-		syscall_clear_error(regs);
+	else
 		regs->regs[0] = val;
-	}
 }
 
 static inline void syscall_get_arguments(struct task_struct *task,

arch/sh/include/asm/syscall_64.h

@@ -21,23 +21,10 @@ static inline void syscall_rollback(struct task_struct *task,
 	 */
 }
 
-static inline bool syscall_has_error(struct pt_regs *regs)
-{
-	return (regs->sr & 0x1) ? true : false;
-}
-static inline void syscall_set_error(struct pt_regs *regs)
-{
-	regs->sr |= 0x1;
-}
-static inline void syscall_clear_error(struct pt_regs *regs)
-{
-	regs->sr &= ~0x1;
-}
-
 static inline long syscall_get_error(struct task_struct *task,
 				     struct pt_regs *regs)
 {
-	return syscall_has_error(regs) ? regs->regs[9] : 0;
+	return IS_ERR_VALUE(regs->regs[9]) ? regs->regs[9] : 0;
 }
 
 static inline long syscall_get_return_value(struct task_struct *task,
@@ -50,13 +37,10 @@ static inline void syscall_set_return_value(struct task_struct *task,
 					    struct pt_regs *regs,
 					    int error, long val)
 {
-	if (error) {
-		syscall_set_error(regs);
+	if (error)
 		regs->regs[9] = -error;
-	} else {
-		syscall_clear_error(regs);
+	else
 		regs->regs[9] = val;
-	}
 }
 
 static inline void syscall_get_arguments(struct task_struct *task,

arch/sh/kernel/cpu/sh4/fpu.c

@@ -423,7 +423,7 @@ static int ieee_fpe_handler(struct pt_regs *regs)
 		int m;
 		unsigned int hx;
 
-		m = (finsn >> 9) & 0x7;
+		m = (finsn >> 8) & 0x7;
 		hx = tsk->thread.fpu.hard.fp_regs[m];
 
 		if ((tsk->thread.fpu.hard.fpscr & FPSCR_CAUSE_ERROR)

arch/sh/kernel/setup.c

@@ -262,11 +262,11 @@ void __init setup_bootmem_allocator(unsigned long free_pfn)
 			BOOTMEM_DEFAULT);
 
 	/*
-	 * reserve physical page 0 - it's a special BIOS page on many boxes,
-	 * enabling clean reboots, SMP operation, laptop functions.
+	 * Reserve physical pages below CONFIG_ZERO_PAGE_OFFSET.
 	 */
-	reserve_bootmem(__MEMORY_START, CONFIG_ZERO_PAGE_OFFSET,
-			BOOTMEM_DEFAULT);
+	if (CONFIG_ZERO_PAGE_OFFSET != 0)
+		reserve_bootmem(__MEMORY_START, CONFIG_ZERO_PAGE_OFFSET,
+				BOOTMEM_DEFAULT);
 
 	sparse_memory_present_with_active_regions(0);
 

arch/sh/kernel/signal_32.c

@@ -510,7 +510,6 @@ handle_syscall_restart(unsigned long save_r0, struct pt_regs *regs,
 		case -ERESTARTNOHAND:
 		no_system_call_restart:
 			regs->regs[0] = -EINTR;
-			regs->sr |= 1;
 			break;
 
 		case -ERESTARTSYS:
@@ -589,8 +588,7 @@ static void do_signal(struct pt_regs *regs, unsigned int save_r0)
 
 	signr = get_signal_to_deliver(&info, &ka, regs, NULL);
 	if (signr > 0) {
-		if (regs->sr & 1)
-			handle_syscall_restart(save_r0, regs, &ka.sa);
+		handle_syscall_restart(save_r0, regs, &ka.sa);
 
 		/* Whee!  Actually deliver the signal.  */
 		if (handle_signal(signr, &ka, &info, oldset,

arch/sh/kernel/signal_64.c

@@ -60,7 +60,6 @@ handle_syscall_restart(struct pt_regs *regs, struct sigaction *sa)
 		case -ERESTARTNOHAND:
 		no_system_call_restart:
 			regs->regs[REG_RET] = -EINTR;
-			regs->sr |= 1;
 			break;
 
 		case -ERESTARTSYS:
@@ -109,8 +108,7 @@ static int do_signal(struct pt_regs *regs, sigset_t *oldset)
 
 	signr = get_signal_to_deliver(&info, &ka, regs, 0);
 	if (signr > 0) {
-		if (regs->sr & 1)
-			handle_syscall_restart(regs, &ka.sa);
+		handle_syscall_restart(regs, &ka.sa);
 
 		/* Whee!  Actually deliver the signal.  */
 		if (handle_signal(signr, &info, &ka, oldset, regs) == 0) {

arch/sh/lib/checksum.S

@@ -36,8 +36,7 @@
  */
 
 /*	
- * unsigned int csum_partial(const unsigned char *buf, int len,
- *                           unsigned int sum);
+ * asmlinkage __wsum csum_partial(const void *buf, int len, __wsum sum);
  */
 
 .text
@@ -49,11 +48,31 @@ ENTRY(csum_partial)
 	   * Fortunately, it is easy to convert 2-byte alignment to 4-byte
 	   * alignment for the unrolled loop.
 	   */
-	mov	r5, r1
 	mov	r4, r0
-	tst	#2, r0		! Check alignment.
-	bt	2f		! Jump if alignment is ok.
+	tst	#3, r0		! Check alignment.
+	bt/s	2f		! Jump if alignment is ok.
+	 mov	r4, r7		! Keep a copy to check for alignment
 	!
+	tst	#1, r0		! Check alignment.
+	bt	21f		! Jump if alignment is boundary of 2bytes.
+
+	! buf is odd
+	tst	r5, r5
+	add	#-1, r5
+	bt	9f
+	mov.b	@r4+, r0
+	extu.b	r0, r0
+	addc	r0, r6		! t=0 from previous tst
+	mov	r6, r0
+	shll8	r6
+	shlr16	r0
+	shlr8	r0
+	or	r0, r6
+	mov	r4, r0
+	tst	#2, r0
+	bt	2f
+21:
+	! buf is 2 byte aligned (len could be 0)
 	add	#-2, r5		! Alignment uses up two bytes.
 	cmp/pz	r5		!
 	bt/s	1f		! Jump if we had at least two bytes.
@@ -61,16 +80,17 @@ ENTRY(csum_partial)
 	bra	6f
 	 add	#2, r5		! r5 was < 2.  Deal with it.
 1:
-	mov	r5, r1		! Save new len for later use.
 	mov.w	@r4+, r0
 	extu.w	r0, r0
 	addc	r0, r6
 	bf	2f
 	add	#1, r6
 2:
+	! buf is 4 byte aligned (len could be 0)
+	mov	r5, r1
 	mov	#-5, r0
-	shld	r0, r5
-	tst	r5, r5
+	shld	r0, r1
+	tst	r1, r1
 	bt/s	4f		! if it's =0, go to 4f
 	 clrt
 	.align	2
@@ -92,30 +112,31 @@ ENTRY(csum_partial)
 	addc	r0, r6
 	addc	r2, r6
 	movt	r0
-	dt	r5
+	dt	r1
 	bf/s	3b
 	 cmp/eq	#1, r0
-	! here, we know r5==0
-	addc	r5, r6			! add carry to r6
+	! here, we know r1==0
+	addc	r1, r6			! add carry to r6
 4:
-	mov	r1, r0
+	mov	r5, r0
 	and	#0x1c, r0
 	tst	r0, r0
-	bt/s	6f
-	 mov	r0, r5
-	shlr2	r5
+	bt	6f
+	! 4 bytes or more remaining
+	mov	r0, r1
+	shlr2	r1
 	mov	#0, r2
 5:
 	addc	r2, r6
 	mov.l	@r4+, r2
 	movt	r0
-	dt	r5
+	dt	r1
 	bf/s	5b
 	 cmp/eq	#1, r0
 	addc	r2, r6
-	addc	r5, r6		! r5==0 here, so it means add carry-bit
+	addc	r1, r6		! r1==0 here, so it means add carry-bit
 6:
-	mov	r1, r5
+	! 3 bytes or less remaining
 	mov	#3, r0
 	and	r0, r5
 	tst	r5, r5
@@ -139,8 +160,18 @@ ENTRY(csum_partial)
 8:
 	addc	r0, r6
 	mov	#0, r0
-	addc	r0, r6 
+	addc	r0, r6
 9:
+	! Check if the buffer was misaligned, if so realign sum
+	mov	r7, r0
+	tst	#1, r0
+	bt	10f
+	mov	r6, r0
+	shll8	r6
+	shlr16	r0
+	shlr8	r0
+	or	r0, r6
+10:
 	rts
 	 mov	r6, r0
 

arch/sparc/include/asm/cpudata_64.h

@@ -17,7 +17,7 @@
 typedef struct {
 	/* Dcache line 1 */
 	unsigned int	__softirq_pending; /* must be 1st, see rtrap.S */
-	unsigned int	__pad0;
+	unsigned int	__nmi_count;
 	unsigned long	clock_tick;	/* %tick's per second */
 	unsigned long	__pad;
 	unsigned int	__pad1;

arch/sparc/include/asm/irq_64.h

@@ -66,9 +66,6 @@ extern void virt_irq_free(unsigned int virt_irq);
 extern void __init init_IRQ(void);
 extern void fixup_irqs(void);
 
-extern int register_perfctr_intr(void (*handler)(struct pt_regs *));
-extern void release_perfctr_intr(void (*handler)(struct pt_regs *));
-
 static inline void set_softint(unsigned long bits)
 {
 	__asm__ __volatile__("wr	%0, 0x0, %%set_softint"
@@ -98,5 +95,6 @@ void __trigger_all_cpu_backtrace(void);
 extern void *hardirq_stack[NR_CPUS];
 extern void *softirq_stack[NR_CPUS];
 #define __ARCH_HAS_DO_SOFTIRQ
+#define ARCH_HAS_NMI_WATCHDOG
 
 #endif