| .. |
|
manroland
|
3887c3fbdb
mucmc52, uc101: delete ata@3a00 node, if no CF card is detected
|
16 years ago |
|
A3000.h
|
6d0f6bcf33
rename CFG_ macros to CONFIG_SYS
|
17 years ago |
|
ADCIOP.h
|
6d0f6bcf33
rename CFG_ macros to CONFIG_SYS
|
17 years ago |
|
ADNPESC1.h
|
b1c0eaac11
Convert CS8900 Ethernet driver to CONFIG_NET_MULTI API
|
16 years ago |
|
ADNPESC1_base_32.h
|
6d0f6bcf33
rename CFG_ macros to CONFIG_SYS
|
17 years ago |
|
ADS860.h
|
6d0f6bcf33
rename CFG_ macros to CONFIG_SYS
|
17 years ago |
|
AMX860.h
|
6d0f6bcf33
rename CFG_ macros to CONFIG_SYS
|
17 years ago |
|
AP1000.h
|
6d0f6bcf33
rename CFG_ macros to CONFIG_SYS
|
17 years ago |
|
APC405.h
|
74de7aefd7
Add "source" command; prepare removal of "autoscr" command
|
16 years ago |
|
AR405.h
|
18cc7afd9a
Enable CONFIG_NET_MULTI on all remaining PPC4xx boards
|
16 years ago |
|
ASH405.h
|
170c19725e
NAND: Fix warning Please define CONFIG_SYS_64BIT_VSPRINTF...
|
16 years ago |
|
ATUM8548.h
|
bafdf9aa9d
85xx: Remove unused CONFIG_CLEAR_LAW0 defines
|
16 years ago |
|
Adder.h
|
6d0f6bcf33
rename CFG_ macros to CONFIG_SYS
|
17 years ago |
|
AdderUSB.h
|
6d0f6bcf33
rename CFG_ macros to CONFIG_SYS
|
17 years ago |
|
Alaska8220.h
|
68d7d65100
Separate mtdparts command from jffs2
|
16 years ago |
|
AmigaOneG3SE.h
|
52cb4d4fb3
stdio/device: rework function naming convention
|
16 years ago |
|
B2.h
|
ad7e8aac69
arm: remove cpu_init
|
16 years ago |
|
BAB7xx.h
|
68d7d65100
Separate mtdparts command from jffs2
|
16 years ago |
|
BC3450.h
|
942556a92a
mtd: MTD related config header changes (mtdparts command)
|
16 years ago |
|
BMW.h
|
2419169f57
Remove legacy NAND and disk on chip references from boards.
|
16 years ago |
|
CANBT.h
|
6d0f6bcf33
rename CFG_ macros to CONFIG_SYS
|
17 years ago |
|
CATcenter.h
|
2419169f57
Remove legacy NAND and disk on chip references from boards.
|
16 years ago |
|
CCM.h
|
004eca0c9b
ppc: Clean up calling of phy_reset() during init
|
16 years ago |
|
CMS700.h
|
170c19725e
NAND: Fix warning Please define CONFIG_SYS_64BIT_VSPRINTF...
|
16 years ago |
|
CPC45.h
|
6d0f6bcf33
rename CFG_ macros to CONFIG_SYS
|
17 years ago |
|
CPCI2DP.h
|
91f3353472
ppc4xx: Remove CONFIG_SYS_IGNORE_405_UART_ERRATA_59 from config files
|
16 years ago |
|
CPCI405.h
|
3a8f28d0a6
ppc: Clean up calling of misc_init_r() during init
|
16 years ago |
|
CPCI4052.h
|
3a8f28d0a6
ppc: Clean up calling of misc_init_r() during init
|
16 years ago |
|
CPCI405AB.h
|
3a8f28d0a6
ppc: Clean up calling of misc_init_r() during init
|
16 years ago |
|
CPCI405DT.h
|
3a8f28d0a6
ppc: Clean up calling of misc_init_r() during init
|
16 years ago |
|
CPCI750.h
|
58f10460b0
74xx_7xx: CPCI750: Add CPCI adapter/target support
|
16 years ago |
|
CPCIISER4.h
|
18cc7afd9a
Enable CONFIG_NET_MULTI on all remaining PPC4xx boards
|
16 years ago |
|
CPU86.h
|
2419169f57
Remove legacy NAND and disk on chip references from boards.
|
16 years ago |
|
CPU87.h
|
2419169f57
Remove legacy NAND and disk on chip references from boards.
|
16 years ago |
|
CRAYL1.h
|
18cc7afd9a
Enable CONFIG_NET_MULTI on all remaining PPC4xx boards
|
16 years ago |
|
CU824.h
|
6d0f6bcf33
rename CFG_ macros to CONFIG_SYS
|
17 years ago |
|
DASA_SIM.h
|
2f103ee284
ppc4xx: Update TEXT_BASE for DASA_SIM boards
|
16 years ago |
|
DB64360.h
|
68d7d65100
Separate mtdparts command from jffs2
|
16 years ago |
|
DB64460.h
|
68d7d65100
Separate mtdparts command from jffs2
|
16 years ago |
|
DK1C20.h
|
b1c0eaac11
Convert CS8900 Ethernet driver to CONFIG_NET_MULTI API
|
16 years ago |
|
DK1C20_safe_32.h
|
6d0f6bcf33
rename CFG_ macros to CONFIG_SYS
|
17 years ago |
|
DK1C20_standard_32.h
|
6d0f6bcf33
rename CFG_ macros to CONFIG_SYS
|
17 years ago |
|
DK1S10.h
|
b1c0eaac11
Convert CS8900 Ethernet driver to CONFIG_NET_MULTI API
|
16 years ago |
|
DK1S10_mtx_ldk_20.h
|
6d0f6bcf33
rename CFG_ macros to CONFIG_SYS
|
17 years ago |
|
DK1S10_safe_32.h
|
6d0f6bcf33
rename CFG_ macros to CONFIG_SYS
|
17 years ago |
|
DK1S10_standard_32.h
|
6d0f6bcf33
rename CFG_ macros to CONFIG_SYS
|
17 years ago |
|
DP405.h
|
de47a34d4d
4xx: Remove binary cpld bitstream from DP405 board
|
16 years ago |
|
DU405.h
|
d48eb5131d
i2c: Remove deprecated individual i2c commands
|
16 years ago |
|
DU440.h
|
d48eb5131d
i2c: Remove deprecated individual i2c commands
|
16 years ago |
|
EB+MCF-EV123.h
|
35cf3b57ea
update the EB+MCF-EV123 board support
|
16 years ago |
|
ELPPC.h
|
68d7d65100
Separate mtdparts command from jffs2
|
16 years ago |
|
ELPT860.h
|
004eca0c9b
ppc: Clean up calling of phy_reset() during init
|
16 years ago |
|
EP1C20.h
|
7194ab8095
Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API
|
16 years ago |
|
EP1S10.h
|
7194ab8095
Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API
|
16 years ago |
|
EP1S40.h
|
7194ab8095
Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API
|
16 years ago |
|
EP88x.h
|
6d0f6bcf33
rename CFG_ macros to CONFIG_SYS
|
17 years ago |
|
ERIC.h
|
18cc7afd9a
Enable CONFIG_NET_MULTI on all remaining PPC4xx boards
|
16 years ago |
|
ESTEEM192E.h
|
6d0f6bcf33
rename CFG_ macros to CONFIG_SYS
|
17 years ago |
|
ETX094.h
|
6d0f6bcf33
rename CFG_ macros to CONFIG_SYS
|
17 years ago |
|
EVB64260.h
|
6d0f6bcf33
rename CFG_ macros to CONFIG_SYS
|
17 years ago |
|
EXBITGEN.h
|
18cc7afd9a
Enable CONFIG_NET_MULTI on all remaining PPC4xx boards
|
16 years ago |
|
FADS823.h
|
6d0f6bcf33
rename CFG_ macros to CONFIG_SYS
|
17 years ago |
|
FADS850SAR.h
|
6d0f6bcf33
rename CFG_ macros to CONFIG_SYS
|
17 years ago |
|
FADS860T.h
|
6d0f6bcf33
rename CFG_ macros to CONFIG_SYS
|
17 years ago |
|
FLAGADM.h
|
506f391888
8xx, icache: enabling ICache not before running from RAM
|
16 years ago |
|
FPS850L.h
|
3cb7a4805f
TQM8xx* boards: set larger SMC Rx buffer len
|
16 years ago |
|
FPS860L.h
|
3cb7a4805f
TQM8xx* boards: set larger SMC Rx buffer len
|
16 years ago |
|
G2000.h
|
2419169f57
Remove legacy NAND and disk on chip references from boards.
|
16 years ago |
|
GEN860T.h
|
2419169f57
Remove legacy NAND and disk on chip references from boards.
|
16 years ago |
|
GENIETV.h
|
6d0f6bcf33
rename CFG_ macros to CONFIG_SYS
|
17 years ago |
|
GTH.h
|
6d0f6bcf33
rename CFG_ macros to CONFIG_SYS
|
17 years ago |
|
HH405.h
|
170c19725e
NAND: Fix warning Please define CONFIG_SYS_64BIT_VSPRINTF...
|
16 years ago |
|
HIDDEN_DRAGON.h
|
890d242fac
remove _IO_BASE and KSEG1ADDR from board configuration files
|
16 years ago |
|
HMI10.h
|
3cb7a4805f
TQM8xx* boards: set larger SMC Rx buffer len
|
16 years ago |
|
HUB405.h
|
170c19725e
NAND: Fix warning Please define CONFIG_SYS_64BIT_VSPRINTF...
|
16 years ago |
|
IAD210.h
|
d8d21e699d
boards: move board_get_enetaddr() into board-specific init
|
16 years ago |
|
ICU862.h
|
6d0f6bcf33
rename CFG_ macros to CONFIG_SYS
|
17 years ago |
|
IDS8247.h
|
b55ae40249
FDT: remove obsolete OF_CPU and OF_SOC macros.
|
16 years ago |
|
IP860.h
|
004eca0c9b
ppc: Clean up calling of phy_reset() during init
|
16 years ago |
|
IPHASE4539.h
|
6d0f6bcf33
rename CFG_ macros to CONFIG_SYS
|
17 years ago |
|
ISPAN.h
|
be2254423b
Update all board to support new bbmiiphy driver (with multibus support)
|
16 years ago |
|
IVML24.h
|
004eca0c9b
ppc: Clean up calling of phy_reset() during init
|
16 years ago |
|
IVMS8.h
|
004eca0c9b
ppc: Clean up calling of phy_reset() during init
|
16 years ago |
|
IceCube.h
|
86321fc112
net: removed board-specific CONFIGs from MPC5xxx FEC driver
|
16 years ago |
|
JSE.h
|
18cc7afd9a
Enable CONFIG_NET_MULTI on all remaining PPC4xx boards
|
16 years ago |
|
KAREF.h
|
96e21f86e8
Changed PPC4xx EMAC driver to require CONFIG_PPC4xx_EMAC
|
16 years ago |
|
KUP4K.h
|
6d0f6bcf33
rename CFG_ macros to CONFIG_SYS
|
17 years ago |
|
KUP4X.h
|
6d0f6bcf33
rename CFG_ macros to CONFIG_SYS
|
17 years ago |
|
LANTEC.h
|
68d7d65100
Separate mtdparts command from jffs2
|
16 years ago |
|
M5208EVBE.h
|
bf9a521529
ColdFire: Add M5208EVB and MCF520x CPU support
|
16 years ago |
|
M52277EVB.h
|
0a9e4e7721
unify {CONFIG_,}ENV_IS_EMBEDDED
|
16 years ago |
|
M5235EVB.h
|
0a9e4e7721
unify {CONFIG_,}ENV_IS_EMBEDDED
|
16 years ago |
|
M5249EVB.h
|
012522fef3
ColdFire: Modules header files cleanup
|
16 years ago |
|
M5253DEMO.h
|
890d242fac
remove _IO_BASE and KSEG1ADDR from board configuration files
|
16 years ago |
|
M5253EVBE.h
|
890d242fac
remove _IO_BASE and KSEG1ADDR from board configuration files
|
16 years ago |
|
M5271EVB.h
|
8706ef378f
Coldfire: M5271EVB: Board header update (dependencies)
|
16 years ago |
|
M5272C3.h
|
0a9e4e7721
unify {CONFIG_,}ENV_IS_EMBEDDED
|
16 years ago |
|
M5275EVB.h
|
0a9e4e7721
unify {CONFIG_,}ENV_IS_EMBEDDED
|
16 years ago |
|
M5282EVB.h
|
012522fef3
ColdFire: Modules header files cleanup
|
16 years ago |
|
M53017EVB.h
|
052c089165
ColdFire: Update bootargs
|
16 years ago |
|
M5329EVB.h
|
0a9e4e7721
unify {CONFIG_,}ENV_IS_EMBEDDED
|
16 years ago |
|
M5373EVB.h
|
0a9e4e7721
unify {CONFIG_,}ENV_IS_EMBEDDED
|
16 years ago |
|
M54451EVB.h
|
0a9e4e7721
unify {CONFIG_,}ENV_IS_EMBEDDED
|
16 years ago |
|
M54455EVB.h
|
0a9e4e7721
unify {CONFIG_,}ENV_IS_EMBEDDED
|
16 years ago |
|
M5475EVB.h
|
0a9e4e7721
unify {CONFIG_,}ENV_IS_EMBEDDED
|
16 years ago |
|
M5485EVB.h
|
0a9e4e7721
unify {CONFIG_,}ENV_IS_EMBEDDED
|
16 years ago |
|
MBX.h
|
6d0f6bcf33
rename CFG_ macros to CONFIG_SYS
|
17 years ago |
|
MBX860T.h
|
76756e41cd
ppc: cleanup compiler errors/warnings
|
16 years ago |
|
METROBOX.h
|
96e21f86e8
Changed PPC4xx EMAC driver to require CONFIG_PPC4xx_EMAC
|
16 years ago |
|
MHPC.h
|
68d7d65100
Separate mtdparts command from jffs2
|
16 years ago |
|
MIP405.h
|
a694610d33
Merge branch 'master' of git://git.denx.de/u-boot-nand-flash
|
16 years ago |
|
ML2.h
|
68d7d65100
Separate mtdparts command from jffs2
|
16 years ago |
|
MOUSSE.h
|
6d0f6bcf33
rename CFG_ macros to CONFIG_SYS
|
17 years ago |
|
MPC8260ADS.h
|
be2254423b
Update all board to support new bbmiiphy driver (with multibus support)
|
16 years ago |
|
MPC8266ADS.h
|
be2254423b
Update all board to support new bbmiiphy driver (with multibus support)
|
16 years ago |
|
MPC8313ERDB.h
|
c7190f028f
mpc83xx: retain POR values of non-configured ACR, SPCR, SCCR, and LCRR bitfields
|
16 years ago |
|
MPC8315ERDB.h
|
c7190f028f
mpc83xx: retain POR values of non-configured ACR, SPCR, SCCR, and LCRR bitfields
|
16 years ago |
|
MPC8323ERDB.h
|
c7190f028f
mpc83xx: retain POR values of non-configured ACR, SPCR, SCCR, and LCRR bitfields
|
16 years ago |
|
MPC832XEMDS.h
|
c7190f028f
mpc83xx: retain POR values of non-configured ACR, SPCR, SCCR, and LCRR bitfields
|
16 years ago |
|
MPC8349EMDS.h
|
c7190f028f
mpc83xx: retain POR values of non-configured ACR, SPCR, SCCR, and LCRR bitfields
|
16 years ago |
|
MPC8349ITX.h
|
c7190f028f
mpc83xx: retain POR values of non-configured ACR, SPCR, SCCR, and LCRR bitfields
|
16 years ago |
|
MPC8360EMDS.h
|
c7190f028f
mpc83xx: retain POR values of non-configured ACR, SPCR, SCCR, and LCRR bitfields
|
16 years ago |
|
MPC8360ERDK.h
|
c7190f028f
mpc83xx: retain POR values of non-configured ACR, SPCR, SCCR, and LCRR bitfields
|
16 years ago |
|
MPC837XEMDS.h
|
c7190f028f
mpc83xx: retain POR values of non-configured ACR, SPCR, SCCR, and LCRR bitfields
|
16 years ago |
|
MPC837XERDB.h
|
c7190f028f
mpc83xx: retain POR values of non-configured ACR, SPCR, SCCR, and LCRR bitfields
|
16 years ago |
|
MPC8536DS.h
|
e40ac4870c
On-chip ROM boot: MPC8536DS support
|
16 years ago |
|
MPC8540ADS.h
|
89188a6233
85xx: Bump up the BOOTMAP to 16M on FSL 85xx boards
|
16 years ago |
|
MPC8540EVAL.h
|
bdab39d358
rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV
|
16 years ago |
|
MPC8541CDS.h
|
89188a6233
85xx: Bump up the BOOTMAP to 16M on FSL 85xx boards
|
16 years ago |
|
MPC8544DS.h
|
f90dc43fd6
85xx: Removed BEDBUG support from FSL 85xx boards
|
16 years ago |
|
MPC8548CDS.h
|
bafdf9aa9d
85xx: Remove unused CONFIG_CLEAR_LAW0 defines
|
16 years ago |
|
MPC8555CDS.h
|
89188a6233
85xx: Bump up the BOOTMAP to 16M on FSL 85xx boards
|
16 years ago |
|
MPC8560ADS.h
|
be2254423b
Update all board to support new bbmiiphy driver (with multibus support)
|
16 years ago |
|
MPC8568MDS.h
|
89188a6233
85xx: Bump up the BOOTMAP to 16M on FSL 85xx boards
|
16 years ago |
|
MPC8569MDS.h
|
a29155e122
mpc85xx: Add eLBC NAND support for MPC8569E-MDS boards
|
15 years ago |
|
MPC8572DS.h
|
f9edcc10e6
ppc/85xx: Simplify the top makefile for 36-bit config for MPC8572DS
|
16 years ago |
|
MPC8610HPCD.h
|
26df6aa991
mpc86xx: delete unused MPC86xx_DDR_SDRAM_CLK_CNTL define
|
16 years ago |
|
MPC8641HPCN.h
|
26df6aa991
mpc86xx: delete unused MPC86xx_DDR_SDRAM_CLK_CNTL define
|
16 years ago |
|
MPC86xADS.h
|
6d0f6bcf33
rename CFG_ macros to CONFIG_SYS
|
17 years ago |
|
MPC885ADS.h
|
6d0f6bcf33
rename CFG_ macros to CONFIG_SYS
|
17 years ago |
|
MUSENKI.h
|
6d0f6bcf33
rename CFG_ macros to CONFIG_SYS
|
17 years ago |
|
MVBC_P.h
|
3202d33169
Remove deprecated 'autoscr' command/variables
|
16 years ago |
|
MVBLM7.h
|
c7190f028f
mpc83xx: retain POR values of non-configured ACR, SPCR, SCCR, and LCRR bitfields
|
16 years ago |
|
MVBLUE.h
|
bdab39d358
rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV
|
16 years ago |
|
MVS1.h
|
bdab39d358
rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV
|
16 years ago |
|
MigoR.h
|
7194ab8095
Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API
|
16 years ago |
|
NC650.h
|
68d7d65100
Separate mtdparts command from jffs2
|
16 years ago |
|
NETPHONE.h
|
7640f41988
Fix boards broken after removal of legacy NAND and DoC support
|
16 years ago |
|
NETTA.h
|
7640f41988
Fix boards broken after removal of legacy NAND and DoC support
|
16 years ago |
|
NETTA2.h
|
7640f41988
Fix boards broken after removal of legacy NAND and DoC support
|
16 years ago |
|
NETVIA.h
|
7640f41988
Fix boards broken after removal of legacy NAND and DoC support
|
16 years ago |
|
NSCU.h
|
3cb7a4805f
TQM8xx* boards: set larger SMC Rx buffer len
|
16 years ago |
|
NX823.h
|
74de7aefd7
Add "source" command; prepare removal of "autoscr" command
|
16 years ago |
|
OCRTC.h
|
18cc7afd9a
Enable CONFIG_NET_MULTI on all remaining PPC4xx boards
|
16 years ago |
|
ORSG.h
|
18cc7afd9a
Enable CONFIG_NET_MULTI on all remaining PPC4xx boards
|
16 years ago |
|
OXC.h
|
0a9e4e7721
unify {CONFIG_,}ENV_IS_EMBEDDED
|
16 years ago |
|
P1_P2_RDB.h
|
4946775c6d
Coding Style cleanup; update CHANGELOG, prepare -rc1
|
15 years ago |
|
P2020DS.h
|
a0f9e0e0f0
ppc/85xx: Simplify the top makefile for 36-bit config for P2020DS
|
16 years ago |
|
P3G4.h
|
6d0f6bcf33
rename CFG_ macros to CONFIG_SYS
|
17 years ago |
|
PATI.h
|
bdab39d358
rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV
|
16 years ago |
|
PCI405.h
|
91f3353472
ppc4xx: Remove CONFIG_SYS_IGNORE_405_UART_ERRATA_59 from config files
|
16 years ago |
|
PCI5441.h
|
bdab39d358
rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV
|
16 years ago |
|
PCIPPC2.h
|
2419169f57
Remove legacy NAND and disk on chip references from boards.
|
16 years ago |
|
PCIPPC6.h
|
2419169f57
Remove legacy NAND and disk on chip references from boards.
|
16 years ago |
|
PIP405.h
|
a694610d33
Merge branch 'master' of git://git.denx.de/u-boot-nand-flash
|
16 years ago |
|
PK1C20.h
|
7194ab8095
Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API
|
16 years ago |
|
PLU405.h
|
170c19725e
NAND: Fix warning Please define CONFIG_SYS_64BIT_VSPRINTF...
|
16 years ago |
|
PM520.h
|
2419169f57
Remove legacy NAND and disk on chip references from boards.
|
16 years ago |
|
PM826.h
|
2419169f57
Remove legacy NAND and disk on chip references from boards.
|
16 years ago |
|
PM828.h
|
2419169f57
Remove legacy NAND and disk on chip references from boards.
|
16 years ago |
|
PM854.h
|
017f11f68e
8xxx: Break out DMA code to a common file
|
16 years ago |
|
PM856.h
|
017f11f68e
8xxx: Break out DMA code to a common file
|
16 years ago |
|
PMC405.h
|
82379b5564
ppc4xx: Add CONFIG_PCI_4xx_PTM_OVERWRITE to some esd 4xx boards
|
16 years ago |
|
PMC405DE.h
|
82379b5564
ppc4xx: Add CONFIG_PCI_4xx_PTM_OVERWRITE to some esd 4xx boards
|
16 years ago |
|
PMC440.h
|
3b4bd2d75c
ppc4xx: Add SDRAM detection for PMC440 boards
|
16 years ago |
|
PN62.h
|
74de7aefd7
Add "source" command; prepare removal of "autoscr" command
|
16 years ago |
|
PPChameleonEVB.h
|
a694610d33
Merge branch 'master' of git://git.denx.de/u-boot-nand-flash
|
16 years ago |
|
QS823.h
|
bdab39d358
rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV
|
16 years ago |
|
QS850.h
|
bdab39d358
rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV
|
16 years ago |
|
QS860T.h
|
6d0f6bcf33
rename CFG_ macros to CONFIG_SYS
|
17 years ago |
|
R360MPI.h
|
68d7d65100
Separate mtdparts command from jffs2
|
16 years ago |
|
RBC823.h
|
2419169f57
Remove legacy NAND and disk on chip references from boards.
|
16 years ago |
|
RPXClassic.h
|
d8d21e699d
boards: move board_get_enetaddr() into board-specific init
|
16 years ago |
|
RPXlite.h
|
6d0f6bcf33
rename CFG_ macros to CONFIG_SYS
|
17 years ago |
|
RPXlite_DW.h
|
6d0f6bcf33
rename CFG_ macros to CONFIG_SYS
|
17 years ago |
|
RPXsuper.h
|
004eca0c9b
ppc: Clean up calling of phy_reset() during init
|
16 years ago |
|
RRvision.h
|
6d0f6bcf33
rename CFG_ macros to CONFIG_SYS
|
17 years ago |
|
Rattler.h
|
be2254423b
Update all board to support new bbmiiphy driver (with multibus support)
|
16 years ago |
|
SBC8540.h
|
be2254423b
Update all board to support new bbmiiphy driver (with multibus support)
|
16 years ago |
|
SCM.h
|
6d0f6bcf33
rename CFG_ macros to CONFIG_SYS
|
17 years ago |
|
SIMPC8313.h
|
c7190f028f
mpc83xx: retain POR values of non-configured ACR, SPCR, SCCR, and LCRR bitfields
|
16 years ago |
|
SL8245.h
|
6d0f6bcf33
rename CFG_ macros to CONFIG_SYS
|
17 years ago |
|
SM850.h
|
3cb7a4805f
TQM8xx* boards: set larger SMC Rx buffer len
|
16 years ago |
|
SMN42.h
|
8fc3bb4b06
arm: cleanup remaining CONFIG_INIT_CRITICAL
|
16 years ago |
|
SPD823TS.h
|
004eca0c9b
ppc: Clean up calling of phy_reset() during init
|
16 years ago |
|
SX1.h
|
3791a1187c
arm925t: Fix CONFIG_SYS_HZ to 1000
|
16 years ago |
|
SXNI855T.h
|
2419169f57
Remove legacy NAND and disk on chip references from boards.
|
16 years ago |
|
Sandpoint8240.h
|
6d0f6bcf33
rename CFG_ macros to CONFIG_SYS
|
17 years ago |
|
Sandpoint8245.h
|
6d0f6bcf33
rename CFG_ macros to CONFIG_SYS
|
17 years ago |
|
TASREG.h
|
012522fef3
ColdFire: Modules header files cleanup
|
16 years ago |
|
TB5200.h
|
942556a92a
mtd: MTD related config header changes (mtdparts command)
|
16 years ago |
|
TK885D.h
|
3cb7a4805f
TQM8xx* boards: set larger SMC Rx buffer len
|
16 years ago |
|
TOP5200.h
|
86321fc112
net: removed board-specific CONFIGs from MPC5xxx FEC driver
|
16 years ago |
|
TOP860.h
|
74de7aefd7
Add "source" command; prepare removal of "autoscr" command
|
16 years ago |
|
TQM5200.h
|
95c44ec485
tqm5200: Correct comment and code in post_hotkeys_pressed.
|
16 years ago |
|
TQM823L.h
|
3cb7a4805f
TQM8xx* boards: set larger SMC Rx buffer len
|
16 years ago |
|
TQM823M.h
|
3cb7a4805f
TQM8xx* boards: set larger SMC Rx buffer len
|
16 years ago |
|
TQM8260.h
|
86b4bafdfa
TQM8260: fix locations of kernel and ramdisk images in flash
|
16 years ago |
|
TQM8272.h
|
be2254423b
Update all board to support new bbmiiphy driver (with multibus support)
|
16 years ago |
|
TQM834x.h
|
c7190f028f
mpc83xx: retain POR values of non-configured ACR, SPCR, SCCR, and LCRR bitfields
|
16 years ago |
|
TQM850L.h
|
3cb7a4805f
TQM8xx* boards: set larger SMC Rx buffer len
|
16 years ago |
|
TQM850M.h
|
3cb7a4805f
TQM8xx* boards: set larger SMC Rx buffer len
|
16 years ago |
|
TQM855L.h
|
3cb7a4805f
TQM8xx* boards: set larger SMC Rx buffer len
|
16 years ago |
|
TQM855M.h
|
3cb7a4805f
TQM8xx* boards: set larger SMC Rx buffer len
|
16 years ago |
|
TQM85xx.h
|
a694610d33
Merge branch 'master' of git://git.denx.de/u-boot-nand-flash
|
16 years ago |
|
TQM860L.h
|
3cb7a4805f
TQM8xx* boards: set larger SMC Rx buffer len
|
16 years ago |
|
TQM860M.h
|
3cb7a4805f
TQM8xx* boards: set larger SMC Rx buffer len
|
16 years ago |
|
TQM862L.h
|
3cb7a4805f
TQM8xx* boards: set larger SMC Rx buffer len
|
16 years ago |
|
TQM862M.h
|
3cb7a4805f
TQM8xx* boards: set larger SMC Rx buffer len
|
16 years ago |
|
TQM866M.h
|
3cb7a4805f
TQM8xx* boards: set larger SMC Rx buffer len
|
16 years ago |
|
TQM885D.h
|
3cb7a4805f
TQM8xx* boards: set larger SMC Rx buffer len
|
16 years ago |
|
Total5200.h
|
6a397ef0e6
mpc52xx: Get rid of board-specific #ifdef's in cpu/mpc5xxx/ide.c
|
16 years ago |
|
VCMA9.h
|
b1c0eaac11
Convert CS8900 Ethernet driver to CONFIG_NET_MULTI API
|
16 years ago |
|
VOH405.h
|
170c19725e
NAND: Fix warning Please define CONFIG_SYS_64BIT_VSPRINTF...
|
16 years ago |
|
VOM405.h
|
700d553fd3
4xx: Remove binary cpld bitstream from VOM405 board
|
16 years ago |
|
VoVPN-GW.h
|
be2254423b
Update all board to support new bbmiiphy driver (with multibus support)
|
16 years ago |
|
W7OLMC.h
|
3a8f28d0a6
ppc: Clean up calling of misc_init_r() during init
|
16 years ago |
|
W7OLMG.h
|
3a8f28d0a6
ppc: Clean up calling of misc_init_r() during init
|
16 years ago |
|
WUH405.h
|
170c19725e
NAND: Fix warning Please define CONFIG_SYS_64BIT_VSPRINTF...
|
16 years ago |
|
XPEDITE1000.h
|
10c1b21855
xpedite1k: Move to X-ES vendor directory
|
16 years ago |
|
XPEDITE5170.h
|
858290178f
ppc: Enable full relocation to RAM
|
16 years ago |
|
XPEDITE5200.h
|
858290178f
ppc: Enable full relocation to RAM
|
16 years ago |
|
XPEDITE5370.h
|
48618126f7
xpedite5370: Enable multi-core support
|
15 years ago |
|
Yukon8220.h
|
6d0f6bcf33
rename CFG_ macros to CONFIG_SYS
|
17 years ago |
|
ZPC1900.h
|
be2254423b
Update all board to support new bbmiiphy driver (with multibus support)
|
16 years ago |
|
ZUMA.h
|
68d7d65100
Separate mtdparts command from jffs2
|
16 years ago |
|
acadia.h
|
84a45d33c2
ppc4xx: Enable commands for FDT enabled Linux booting on AMCC Acadia
|
16 years ago |
|
actux1.h
|
488f5d8790
Remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ
|
16 years ago |
|
actux2.h
|
488f5d8790
Remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ
|
16 years ago |
|
actux3.h
|
488f5d8790
Remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ
|
16 years ago |
|
actux4.h
|
488f5d8790
Remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ
|
16 years ago |
|
aev.h
|
6d0f6bcf33
rename CFG_ macros to CONFIG_SYS
|
17 years ago |
|
afeb9260.h
|
70ebf31633
AT91: factor out ROUND() macro
|
16 years ago |
|
alpr.h
|
6c869637fe
NAND: rename NAND_MAX_CHIPS to CONFIG_SYS_NAND_MAX_CHIPS
|
16 years ago |
|
amcc-common.h
|
92b8964bed
ppc4xx: Update flash size in reg property of the NOR flash node
|
16 years ago |
|
ap325rxa.h
|
736fead8fd
Convert SMC911X Ethernet driver to CONFIG_NET_MULTI API
|
16 years ago |
|
apollon.h
|
2eb99ca802
NAND: Part 2: Fix warning Please define CONFIG_SYS_64BIT_VSPRINTF...
|
16 years ago |
|
aria.h
|
054197ba8e
mpc512x: Streamlined fixed_sdram() init sequence.
|
16 years ago |
|
armadillo.h
|
b1c0eaac11
Convert CS8900 Ethernet driver to CONFIG_NET_MULTI API
|
16 years ago |
|
assabet.h
|
b3acb6cd40
arm: clean cache management
|
16 years ago |
|
at91cap9adk.h
|
918319c705
Update the mtd driver name in bootargs for at91-based boards
|
16 years ago |
|
at91rm9200dk.h
|
06bffc6ea5
rm9200 lowevel_init: don't touch reserved/readonly registers
|
16 years ago |
|
at91rm9200ek.h
|
06bffc6ea5
rm9200 lowevel_init: don't touch reserved/readonly registers
|
16 years ago |
|
at91sam9260ek.h
|
918319c705
Update the mtd driver name in bootargs for at91-based boards
|
16 years ago |
|
at91sam9261ek.h
|
918319c705
Update the mtd driver name in bootargs for at91-based boards
|
16 years ago |
|
at91sam9263ek.h
|
918319c705
Update the mtd driver name in bootargs for at91-based boards
|
16 years ago |
|
at91sam9m10g45ek.h
|
918319c705
Update the mtd driver name in bootargs for at91-based boards
|
16 years ago |
|
at91sam9rlek.h
|
918319c705
Update the mtd driver name in bootargs for at91-based boards
|
16 years ago |
|
atc.h
|
6d0f6bcf33
rename CFG_ macros to CONFIG_SYS
|
17 years ago |
|
atngw100.h
|
74de7aefd7
Add "source" command; prepare removal of "autoscr" command
|
16 years ago |
|
atstk1002.h
|
74de7aefd7
Add "source" command; prepare removal of "autoscr" command
|
16 years ago |
|
atstk1003.h
|
cb54732052
Merge branch 'fixes' into cleanups
|
16 years ago |
|
atstk1004.h
|
cb54732052
Merge branch 'fixes' into cleanups
|
16 years ago |
|
atstk1006.h
|
74de7aefd7
Add "source" command; prepare removal of "autoscr" command
|
16 years ago |
|
bamboo.h
|
6c869637fe
NAND: rename NAND_MAX_CHIPS to CONFIG_SYS_NAND_MAX_CHIPS
|
16 years ago |
|
barco.h
|
6d0f6bcf33
rename CFG_ macros to CONFIG_SYS
|
17 years ago |
|
bf518f-ezbrd.h
|
afac8b0717
Blackfin: fix SPI flash speed define name
|
16 years ago |
|
bf526-ezbrd.h
|
afac8b0717
Blackfin: fix SPI flash speed define name
|
16 years ago |
|
bf527-ezkit.h
|
afac8b0717
Blackfin: fix SPI flash speed define name
|
16 years ago |
|
bf533-ezkit.h
|
7194ab8095
Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API
|
16 years ago |
|
bf533-stamp.h
|
7194ab8095
Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API
|
16 years ago |
|
bf537-minotaur.h
|
8d1fea2c40
Blackfin: bf537-{minotaur,srv1}: do not hardcode CONFIG_ETHADDR
|
16 years ago |
|
bf537-pnav.h
|
afac8b0717
Blackfin: fix SPI flash speed define name
|
16 years ago |
|
bf537-srv1.h
|
8d1fea2c40
Blackfin: bf537-{minotaur,srv1}: do not hardcode CONFIG_ETHADDR
|
16 years ago |
|
bf537-stamp.h
|
aa7b248a05
Blackfin: bf537-stamp: comment CF-Flash Card Support better
|
16 years ago |
|
bf538f-ezkit.h
|
7194ab8095
Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API
|
16 years ago |
|
bf548-ezkit.h
|
736fead8fd
Convert SMC911X Ethernet driver to CONFIG_NET_MULTI API
|
16 years ago |
|
bf561-ezkit.h
|
7194ab8095
Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API
|
16 years ago |
|
bfin_adi_common.h
|
46a887949e
Blackfin: update default console= settings
|
16 years ago |
|
blackstamp.h
|
7194ab8095
Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API
|
16 years ago |
|
bubinga.h
|
0f89c54be9
i2c: Update references to individual i2c commands
|
16 years ago |
|
c2mon.h
|
6d0f6bcf33
rename CFG_ macros to CONFIG_SYS
|
17 years ago |
|
canmb.h
|
86321fc112
net: removed board-specific CONFIGs from MPC5xxx FEC driver
|
16 years ago |
|
canyonlands.h
|
916ed9444d
ppc4xx: Canyonlands: Change EBC bus config to drive always (no high-z)
|
15 years ago |
|
cerf250.h
|
7194ab8095
Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API
|
16 years ago |
|
cm-bf527.h
|
c2fbcb6ae8
Blackfin: cm-bf527/cm-bf537: increase flash sectors
|
16 years ago |
|
cm-bf533.h
|
7194ab8095
Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API
|
16 years ago |
|
cm-bf537e.h
|
c2fbcb6ae8
Blackfin: cm-bf527/cm-bf537: increase flash sectors
|
16 years ago |
|
cm-bf537u.h
|
4640c2b869
Blackfin: cm-bf537u: new board port
|
16 years ago |
|
cm-bf548.h
|
736fead8fd
Convert SMC911X Ethernet driver to CONFIG_NET_MULTI API
|
16 years ago |
|
cm-bf561.h
|
7194ab8095
Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API
|
16 years ago |
|
cm4008.h
|
176a600d0e
ks8695: move serial driver to drivers/serial
|
16 years ago |
|
cm41xx.h
|
176a600d0e
ks8695: move serial driver to drivers/serial
|
16 years ago |
|
cm5200.h
|
942556a92a
mtd: MTD related config header changes (mtdparts command)
|
16 years ago |
|
cmc_pu2.h
|
06bffc6ea5
rm9200 lowevel_init: don't touch reserved/readonly registers
|
16 years ago |
|
cmi_mpc5xx.h
|
bdab39d358
rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV
|
16 years ago |
|
cobra5272.h
|
0a9e4e7721
unify {CONFIG_,}ENV_IS_EMBEDDED
|
16 years ago |
|
cogent_common.h
|
da93ed8147
* Patch by Shlomo Kut, 29 Mar 2004:
|
21 years ago |
|
cogent_mpc8260.h
|
3a8f28d0a6
ppc: Clean up calling of misc_init_r() during init
|
16 years ago |
|
cogent_mpc8xx.h
|
3a8f28d0a6
ppc: Clean up calling of misc_init_r() during init
|
16 years ago |
|
cpci5200.h
|
86321fc112
net: removed board-specific CONFIGs from MPC5xxx FEC driver
|
16 years ago |
|
cpu9260.h
|
b1e81f701d
AT91 CPU9260 CPU9G20 Fix compile warnings
|
16 years ago |
|
cpuat91.h
|
513bbe1b17
AT91 CPUAT91 Fix compiler warning
|
16 years ago |
|
cradle.h
|
7194ab8095
Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API
|
16 years ago |
|
csb226.h
|
b1c0eaac11
Convert CS8900 Ethernet driver to CONFIG_NET_MULTI API
|
16 years ago |
|
csb272.h
|
18cc7afd9a
Enable CONFIG_NET_MULTI on all remaining PPC4xx boards
|
16 years ago |
|
csb472.h
|
18cc7afd9a
Enable CONFIG_NET_MULTI on all remaining PPC4xx boards
|
16 years ago |
|
csb637.h
|
06bffc6ea5
rm9200 lowevel_init: don't touch reserved/readonly registers
|
16 years ago |
|
davinci_dm355evm.h
|
86a725b9c8
TI DaVinci DM355: Add Config option for 64 bit Support
|
16 years ago |
|
davinci_dm355leopard.h
|
5df65cf56a
TI: DaVinci: DM355 Leopard board support
|
16 years ago |
|
davinci_dm365evm.h
|
a4474ff862
TI DaVinci: Adding Copyright for DM365 EVM
|
16 years ago |
|
davinci_dm6467evm.h
|
4946775c6d
Coding Style cleanup; update CHANGELOG, prepare -rc1
|
15 years ago |
|
davinci_dvevm.h
|
54aa603d2c
TI DaVinci DVEVM: Add Config option for 64 bit Support
|
16 years ago |
|
davinci_schmoogie.h
|
a16df2c111
TI DaVinci: Remove references to SZ_xx
|
16 years ago |
|
davinci_sffsdr.h
|
a16df2c111
TI DaVinci: Remove references to SZ_xx
|
16 years ago |
|
davinci_sonata.h
|
64d945abe8
TI DaVinci Sonata: Add Config option for 64 bit Support
|
16 years ago |
|
dbau1x00.h
|
bdab39d358
rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV
|
16 years ago |
|
debris.h
|
68d7d65100
Separate mtdparts command from jffs2
|
16 years ago |
|
delta.h
|
a694610d33
Merge branch 'master' of git://git.denx.de/u-boot-nand-flash
|
16 years ago |
|
devkit8000.h
|
9c44ddccb6
TI: OMAP3: Remove SZ_xx references
|
16 years ago |
|
digsy_mtc.h
|
c569ad6e1e
digsy_mtc: Add TCR register value for RTC (DS1339)
|
16 years ago |
|
dlvision.h
|
b209a11482
ppc4xx: Add DL-Vision 405EP board support
|
16 years ago |
|
dnp1110.h
|
7194ab8095
Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API
|
16 years ago |
|
eNET.h
|
5b34a296d4
Add PCI support to eNET board
|
16 years ago |
|
eXalion.h
|
bdab39d358
rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV
|
16 years ago |
|
ebony.h
|
6d0f6bcf33
rename CFG_ macros to CONFIG_SYS
|
17 years ago |
|
ep7312.h
|
b1c0eaac11
Convert CS8900 Ethernet driver to CONFIG_NET_MULTI API
|
16 years ago |
|
ep8248.h
|
be2254423b
Update all board to support new bbmiiphy driver (with multibus support)
|
16 years ago |
|
ep8260.h
|
68d7d65100
Separate mtdparts command from jffs2
|
16 years ago |
|
ep82xxm.h
|
be2254423b
Update all board to support new bbmiiphy driver (with multibus support)
|
16 years ago |
|
espt.h
|
74d9c16a68
sh: Add support ESPT-GIGA borad
|
16 years ago |
|
evb4510.h
|
b3acb6cd40
arm: clean cache management
|
16 years ago |
|
favr-32-ezkit.h
|
74de7aefd7
Add "source" command; prepare removal of "autoscr" command
|
16 years ago |
|
fx12mm.h
|
942556a92a
mtd: MTD related config header changes (mtdparts command)
|
16 years ago |
|
galaxy5200.h
|
353462f6ff
galaxy5200: Add default environment variables
|
15 years ago |
|
gcplus.h
|
8fc3bb4b06
arm: cleanup remaining CONFIG_INIT_CRITICAL
|
16 years ago |
|
gdppc440etx.h
|
89b8619aae
ppc4xx: Add GDsys PowerPC 440 ETX board support.
|
16 years ago |
|
gr_cpci_ax2000.h
|
7194ab8095
Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API
|
16 years ago |
|
gr_ep2s60.h
|
7194ab8095
Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API
|
16 years ago |
|
gr_xc3s_1500.h
|
6d0f6bcf33
rename CFG_ macros to CONFIG_SYS
|
17 years ago |
|
grsim.h
|
74de7aefd7
Add "source" command; prepare removal of "autoscr" command
|
16 years ago |
|
grsim_leon2.h
|
74de7aefd7
Add "source" command; prepare removal of "autoscr" command
|
16 years ago |
|
gth2.h
|
74de7aefd7
Add "source" command; prepare removal of "autoscr" command
|
16 years ago |
|
gw8260.h
|
be2254423b
Update all board to support new bbmiiphy driver (with multibus support)
|
16 years ago |
|
h2_p2_dbg_board.h
|
39539887ea
* Code cleanup (ARM mostly)
|
21 years ago |
|
hammerhead.h
|
cb54732052
Merge branch 'fixes' into cleanups
|
16 years ago |
|
hcu4.h
|
c11da19454
ppc4xx: Update configs for Netstal boards
|
17 years ago |
|
hcu5.h
|
c11da19454
ppc4xx: Update configs for Netstal boards
|
17 years ago |
|
hermes.h
|
6d0f6bcf33
rename CFG_ macros to CONFIG_SYS
|
17 years ago |
|
hmi1001.h
|
86321fc112
net: removed board-specific CONFIGs from MPC5xxx FEC driver
|
16 years ago |
|
hymod.h
|
be2254423b
Update all board to support new bbmiiphy driver (with multibus support)
|
16 years ago |
|
ibf-dsp561.h
|
9ff67e5e4c
Blackfin: unify u-boot linker scripts
|
16 years ago |
|
idmr.h
|
942556a92a
mtd: MTD related config header changes (mtdparts command)
|
16 years ago |
|
impa7.h
|
b1c0eaac11
Convert CS8900 Ethernet driver to CONFIG_NET_MULTI API
|
16 years ago |
|
imx27lite.h
|
10bc241dfc
imx27lite: add support for imx27lite board from LogicPD
|
16 years ago |
|
imx31_litekit.h
|
736fead8fd
Convert SMC911X Ethernet driver to CONFIG_NET_MULTI API
|
16 years ago |
|
imx31_phycore.h
|
736fead8fd
Convert SMC911X Ethernet driver to CONFIG_NET_MULTI API
|
16 years ago |
|
incaip.h
|
68d7d65100
Separate mtdparts command from jffs2
|
16 years ago |
|
inka4x0.h
|
b5650c5d8c
ppc: Remove board-specific command table relocation fixups
|
16 years ago |
|
innokom.h
|
7194ab8095
Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API
|
16 years ago |
|
integratorap.h
|
46937b2742
integratorap/cp: use cfi driver
|
16 years ago |
|
integratorcp.h
|
7194ab8095
Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API
|
16 years ago |
|
intip.h
|
91d599044c
ppc4xx: Make DDR2 timing for intip more robust
|
16 years ago |
|
ixdp425.h
|
488f5d8790
Remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ
|
16 years ago |
|
ixdpg425.h
|
b54384e3ba
arm: timer and interrupt init rework
|
16 years ago |
|
jupiter.h
|
86321fc112
net: removed board-specific CONFIGs from MPC5xxx FEC driver
|
16 years ago |
|
katmai.h
|
d48eb5131d
i2c: Remove deprecated individual i2c commands
|
16 years ago |
|
kb9202.h
|
beebd851cd
at91rm9200: move serial driver to drivers/serial
|
16 years ago |
|
keymile-common.h
|
3202d33169
Remove deprecated 'autoscr' command/variables
|
16 years ago |
|
kilauea.h
|
5b34691ff8
ppc4xx: Kilauea: Fix SDRAM init in NAND booting version
|
16 years ago |
|
km8xx.h
|
dc71b248ef
powerpc: updates for the keymile boards
|
16 years ago |
|
kmeter1.h
|
c7190f028f
mpc83xx: retain POR values of non-configured ACR, SPCR, SCCR, and LCRR bitfields
|
16 years ago |
|
kmsupx4.h
|
1b6275dfb1
8xx: add support for new keymile kmsupx4 board.
|
16 years ago |
|
korat.h
|
d48eb5131d
i2c: Remove deprecated individual i2c commands
|
16 years ago |
|
kvme080.h
|
6d0f6bcf33
rename CFG_ macros to CONFIG_SYS
|
17 years ago |
|
lart.h
|
b1c0eaac11
Convert CS8900 Ethernet driver to CONFIG_NET_MULTI API
|
16 years ago |
|
linkstation.h
|
b55ae40249
FDT: remove obsolete OF_CPU and OF_SOC macros.
|
16 years ago |
|
logodl.h
|
7194ab8095
Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API
|
16 years ago |
|
lpc2292sodimm.h
|
8fc3bb4b06
arm: cleanup remaining CONFIG_INIT_CRITICAL
|
16 years ago |
|
lpd7a400-10.h
|
d14c7ec2b5
Fix SMC91111 regression: lpd7a40x build failures
|
15 years ago |
|
lpd7a400.h
|
3ea201b016
lh7a40x: move serial driver to drivers/serial
|
16 years ago |
|
lpd7a404-10.h
|
d14c7ec2b5
Fix SMC91111 regression: lpd7a40x build failures
|
15 years ago |
|
lpd7a404.h
|
d14c7ec2b5
Fix SMC91111 regression: lpd7a40x build failures
|
15 years ago |
|
luan.h
|
6d0f6bcf33
rename CFG_ macros to CONFIG_SYS
|
17 years ago |
|
lubbock.h
|
379be585eb
pxa: move serial driver to drivers/serial
|
16 years ago |
|
lwmon.h
|
3a8f28d0a6
ppc: Clean up calling of misc_init_r() during init
|
16 years ago |
|
lwmon5.h
|
74de7aefd7
Add "source" command; prepare removal of "autoscr" command
|
16 years ago |
|
m501sk.h
|
06bffc6ea5
rm9200 lowevel_init: don't touch reserved/readonly registers
|
16 years ago |
|
makalu.h
|
6d0f6bcf33
rename CFG_ macros to CONFIG_SYS
|
17 years ago |
|
mcc200.h
|
efd988ebaa
mcc200: fix build error
|
16 years ago |
|
mcu25.h
|
c11da19454
ppc4xx: Update configs for Netstal boards
|
17 years ago |
|
mecp5123.h
|
054197ba8e
mpc512x: Streamlined fixed_sdram() init sequence.
|
16 years ago |
|
mecp5200.h
|
86321fc112
net: removed board-specific CONFIGs from MPC5xxx FEC driver
|
16 years ago |
|
meesc.h
|
a380279b2a
at91: Update MEESC board support
|
16 years ago |
|
mgcoge.h
|
b55ae40249
FDT: remove obsolete OF_CPU and OF_SOC macros.
|
16 years ago |
|
mgsuvd.h
|
d044954fe2
8xx, mgsuvd: rename board to a more generic name
|
16 years ago |
|
microblaze-generic.h
|
0900bee9ab
microblaze: Enable hush parser
|
16 years ago |
|
mimc200.h
|
f68378d60a
Add LCD support to MIMC200 board
|
16 years ago |
|
ml300.h
|
6d0f6bcf33
rename CFG_ macros to CONFIG_SYS
|
17 years ago |
|
ml507.h
|
cc2dc9b08c
ppc4xx: Merge xilinx-ppc440 and xilinx-ppc405 cfg
|
16 years ago |
|
modnet50.h
|
9ea91c9fef
netarm: move serial driver to drivers/serial
|
16 years ago |
|
motionpro.h
|
942556a92a
mtd: MTD related config header changes (mtdparts command)
|
16 years ago |
|
mp2usb.h
|
06bffc6ea5
rm9200 lowevel_init: don't touch reserved/readonly registers
|
16 years ago |
|
mpc5121ads.h
|
a5aa3998ab
Add Elpida Memory Configuration to mpc5121ads Boards
|
16 years ago |
|
mpc7448hpc2.h
|
b55ae40249
FDT: remove obsolete OF_CPU and OF_SOC macros.
|
16 years ago |
|
mpr2.h
|
be45c63256
sh3/sh4: rename config option TMU_CLK_DIVIDER to CONFIG_SYS_TMU_CLK_DIV
|
16 years ago |
|
ms7720se.h
|
be45c63256
sh3/sh4: rename config option TMU_CLK_DIVIDER to CONFIG_SYS_TMU_CLK_DIV
|
16 years ago |
|
ms7722se.h
|
7194ab8095
Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API
|
16 years ago |
|
ms7750se.h
|
be45c63256
sh3/sh4: rename config option TMU_CLK_DIVIDER to CONFIG_SYS_TMU_CLK_DIV
|
16 years ago |
|
muas3001.h
|
be2254423b
Update all board to support new bbmiiphy driver (with multibus support)
|
16 years ago |
|
mucmc52.h
|
7f625fc6d3
mpc5200, mucmc52, uc101: config cleanup
|
16 years ago |
|
munices.h
|
86321fc112
net: removed board-specific CONFIGs from MPC5xxx FEC driver
|
16 years ago |
|
mv88f6281gtw_ge.h
|
4abc5bffea
Marvell MV88F6281GTW_GE Board support
|
16 years ago |
|
mx1ads.h
|
b1c0eaac11
Convert CS8900 Ethernet driver to CONFIG_NET_MULTI API
|
16 years ago |
|
mx1fs2.h
|
942556a92a
mtd: MTD related config header changes (mtdparts command)
|
16 years ago |
|
mx31ads.h
|
b1c0eaac11
Convert CS8900 Ethernet driver to CONFIG_NET_MULTI API
|
16 years ago |
|
mx31pdk.h
|
736fead8fd
Convert SMC911X Ethernet driver to CONFIG_NET_MULTI API
|
16 years ago |
|
neo.h
|
d7b26d5832
ppc4xx: Add GDSys neo 405EP board support
|
17 years ago |
|
netstal-common.h
|
18cc7afd9a
Enable CONFIG_NET_MULTI on all remaining PPC4xx boards
|
16 years ago |
|
netstar.h
|
7194ab8095
Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API
|
16 years ago |
|
nhk8815.h
|
7194ab8095
Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API
|
16 years ago |
|
ns9750dev.h
|
488f5d8790
Remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ
|
16 years ago |
|
o2dnt.h
|
86321fc112
net: removed board-specific CONFIGs from MPC5xxx FEC driver
|
16 years ago |
|
ocotea.h
|
6d0f6bcf33
rename CFG_ macros to CONFIG_SYS
|
17 years ago |
|
omap1510.h
|
b23253835f
ARM OMAP : Correct Invalid Timer Register Field Declaration in omap1510.h & omap730.h
|
17 years ago |
|
omap1510inn.h
|
3791a1187c
arm925t: Fix CONFIG_SYS_HZ to 1000
|
16 years ago |
|
omap1610h2.h
|
81472d893f
OMAP: rename timer divisor
|
16 years ago |
|
omap1610inn.h
|
81472d893f
OMAP: rename timer divisor
|
16 years ago |
|
omap2420h4.h
|
2419169f57
Remove legacy NAND and disk on chip references from boards.
|
16 years ago |
|
omap3_beagle.h
|
9c44ddccb6
TI: OMAP3: Remove SZ_xx references
|
16 years ago |
|
omap3_evm.h
|
9c44ddccb6
TI: OMAP3: Remove SZ_xx references
|
16 years ago |
|
omap3_overo.h
|
9c44ddccb6
TI: OMAP3: Remove SZ_xx references
|
16 years ago |
|
omap3_pandora.h
|
9c44ddccb6
TI: OMAP3: Remove SZ_xx references
|
16 years ago |
|
omap3_sdp3430.h
|
e63e5904b4
TI OMAP3 SDP3430: Initial Support
|
16 years ago |
|
omap3_zoom1.h
|
9c44ddccb6
TI: OMAP3: Remove SZ_xx references
|
16 years ago |
|
omap3_zoom2.h
|
9c44ddccb6
TI: OMAP3: Remove SZ_xx references
|
16 years ago |
|
omap5912osk.h
|
81472d893f
OMAP: rename timer divisor
|
16 years ago |
|
omap730.h
|
b23253835f
ARM OMAP : Correct Invalid Timer Register Field Declaration in omap1510.h & omap730.h
|
17 years ago |
|
omap730p2.h
|
81472d893f
OMAP: rename timer divisor
|
16 years ago |
|
openrd_base.h
|
e92daeb5c2
Support for the OpenRD base board
|
16 years ago |
|
p3mx.h
|
3cbcfa70b1
p3mx: Remove serial relocation fixups
|
16 years ago |
|
p3p440.h
|
96e21f86e8
Changed PPC4xx EMAC driver to require CONFIG_PPC4xx_EMAC
|
16 years ago |
|
pb1x00.h
|
bdab39d358
rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV
|
16 years ago |
|
pcm030.h
|
c9969947a4
board support patch for phyCORE-MPC5200B-tiny
|
16 years ago |
|
pcs440ep.h
|
96e21f86e8
Changed PPC4xx EMAC driver to require CONFIG_PPC4xx_EMAC
|
16 years ago |
|
pcu_e.h
|
004eca0c9b
ppc: Clean up calling of phy_reset() during init
|
16 years ago |
|
pdnb3.h
|
2eb99ca802
NAND: Part 2: Fix warning Please define CONFIG_SYS_64BIT_VSPRINTF...
|
16 years ago |
|
pf5200.h
|
86321fc112
net: removed board-specific CONFIGs from MPC5xxx FEC driver
|
16 years ago |
|
pleb2.h
|
379be585eb
pxa: move serial driver to drivers/serial
|
16 years ago |
|
pm9261.h
|
918319c705
Update the mtd driver name in bootargs for at91-based boards
|
16 years ago |
|
pm9263.h
|
918319c705
Update the mtd driver name in bootargs for at91-based boards
|
16 years ago |
|
ppmc7xx.h
|
bdab39d358
rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV
|
16 years ago |
|
ppmc8260.h
|
be2254423b
Update all board to support new bbmiiphy driver (with multibus support)
|
16 years ago |
|
purple.h
|
6d0f6bcf33
rename CFG_ macros to CONFIG_SYS
|
17 years ago |
|
pxa255_idp.h
|
7194ab8095
Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API
|
16 years ago |
|
qemu-mips.h
|
caf72ff329
Refresh LZMA-lib to v4.65
|
16 years ago |
|
qong.h
|
47d19da4d3
serial_mx31: allow it to work with mx27 too and rename to serial_mxc
|
16 years ago |
|
quad100hd.h
|
170c19725e
NAND: Fix warning Please define CONFIG_SYS_64BIT_VSPRINTF...
|
16 years ago |
|
quantum.h
|
6d0f6bcf33
rename CFG_ macros to CONFIG_SYS
|
17 years ago |
|
r2dplus.h
|
4b96cb6777
Merge branch 'master' of /home/wd/git/u-boot/custodians
|
16 years ago |
|
r7780mp.h
|
c7c1dbbf71
r7780mp: fix typo in Ethernet chip model number comment.
|
16 years ago |
|
rd6281a.h
|
11906936e1
arm: rd6281a: Fixed NAND specific warning
|
16 years ago |
|
redwood.h
|
6d0f6bcf33
rename CFG_ macros to CONFIG_SYS
|
17 years ago |
|
rmu.h
|
3a76ab5c16
rmu board: fix error: 'CONFIG_ENV_SECT_SIZE' undeclared
|
16 years ago |
|
rsdproto.h
|
6d0f6bcf33
rename CFG_ macros to CONFIG_SYS
|
17 years ago |
|
rsk7203.h
|
736fead8fd
Convert SMC911X Ethernet driver to CONFIG_NET_MULTI API
|
16 years ago |
|
sacsng.h
|
be2254423b
Update all board to support new bbmiiphy driver (with multibus support)
|
16 years ago |
|
sbc2410x.h
|
cd85662b34
CONFIG_SYS_HZ fix for ARM902T S3C24X0 Boards
|
16 years ago |
|
sbc35_a9g20.h
|
264e42ee54
Fix Compliation warning for SBC35-A9G20 board
|
15 years ago |
|
sbc405.h
|
18cc7afd9a
Enable CONFIG_NET_MULTI on all remaining PPC4xx boards
|
16 years ago |
|
sbc8240.h
|
bdab39d358
rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV
|
16 years ago |
|
sbc8260.h
|
be2254423b
Update all board to support new bbmiiphy driver (with multibus support)
|
16 years ago |
|
sbc8349.h
|
98d92d8c9f
sbc8349: fix incorrect comment
|
15 years ago |
|
sbc8548.h
|
dd9ca98f26
sbc8548: reclaim wasted sector in boot flash
|
16 years ago |
|
sbc8560.h
|
be2254423b
Update all board to support new bbmiiphy driver (with multibus support)
|
16 years ago |
|
sbc8641d.h
|
26df6aa991
mpc86xx: delete unused MPC86xx_DDR_SDRAM_CLK_CNTL define
|
16 years ago |
|
sc3.h
|
3a8f28d0a6
ppc: Clean up calling of misc_init_r() during init
|
16 years ago |
|
sc520_cdp.h
|
9b32f96b5b
Misc sc520 cdp fixups
|
16 years ago |
|
sc520_spunk.h
|
91ee4e183c
Fixup sc520_spunk board
|
16 years ago |
|
sc520_spunk_rel.h
|
8bde7f776c
* Code cleanup:
|
22 years ago |
|
scb9328.h
|
60f61e6d76
Convert DM9000 driver for CONFIG_NET_MULTI
|
16 years ago |
|
sequoia.h
|
cfc2587462
ppc4xx: Sequoia: Add chip_config command
|
16 years ago |
|
sh7763rdp.h
|
be45c63256
sh3/sh4: rename config option TMU_CLK_DIVIDER to CONFIG_SYS_TMU_CLK_DIV
|
16 years ago |
|
sh7785lcr.h
|
be45c63256
sh3/sh4: rename config option TMU_CLK_DIVIDER to CONFIG_SYS_TMU_CLK_DIV
|
16 years ago |
|
shannon.h
|
b3acb6cd40
arm: clean cache management
|
16 years ago |
|
sheevaplug.h
|
30951960ba
arm: Sheevaplug: Fixed NAND specific warning
|
16 years ago |
|
smdk2400.h
|
cd85662b34
CONFIG_SYS_HZ fix for ARM902T S3C24X0 Boards
|
16 years ago |
|
smdk2410.h
|
cd85662b34
CONFIG_SYS_HZ fix for ARM902T S3C24X0 Boards
|
16 years ago |
|
smdk6400.h
|
b1c0eaac11
Convert CS8900 Ethernet driver to CONFIG_NET_MULTI API
|
16 years ago |
|
smdkc100.h
|
8bc4ee9e82
s5pc1xx: add support SMDKC100 board
|
16 years ago |
|
smmaco4.h
|
942556a92a
mtd: MTD related config header changes (mtdparts command)
|
16 years ago |
|
socrates.h
|
170c19725e
NAND: Fix warning Please define CONFIG_SYS_64BIT_VSPRINTF...
|
16 years ago |
|
sorcery.h
|
6d0f6bcf33
rename CFG_ macros to CONFIG_SYS
|
17 years ago |
|
spc1920.h
|
6d0f6bcf33
rename CFG_ macros to CONFIG_SYS
|
17 years ago |
|
spieval.h
|
6d0f6bcf33
rename CFG_ macros to CONFIG_SYS
|
17 years ago |
|
stxgp3.h
|
004eca0c9b
ppc: Clean up calling of phy_reset() during init
|
16 years ago |
|
stxssa.h
|
bdab39d358
rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV
|
16 years ago |
|
stxxtc.h
|
b55ae40249
FDT: remove obsolete OF_CPU and OF_SOC macros.
|
16 years ago |
|
svm_sc8xx.h
|
2419169f57
Remove legacy NAND and disk on chip references from boards.
|
16 years ago |
|
taihu.h
|
0f89c54be9
i2c: Update references to individual i2c commands
|
16 years ago |
|
taishan.h
|
6d0f6bcf33
rename CFG_ macros to CONFIG_SYS
|
17 years ago |
|
tb0229.h
|
6d0f6bcf33
rename CFG_ macros to CONFIG_SYS
|
17 years ago |
|
tcm-bf537.h
|
9ff67e5e4c
Blackfin: unify u-boot linker scripts
|
16 years ago |
|
tny_a9260.h
|
a38f85e180
Fix Compliation warning for TNY-A9260 and TNY-A9G20
|
15 years ago |
|
trab.h
|
cd85662b34
CONFIG_SYS_HZ fix for ARM902T S3C24X0 Boards
|
16 years ago |
|
trizepsiv.h
|
040f8f63e9
xscale: add support for the polaris board
|
16 years ago |
|
uc100.h
|
6d0f6bcf33
rename CFG_ macros to CONFIG_SYS
|
17 years ago |
|
uc101.h
|
7f625fc6d3
mpc5200, mucmc52, uc101: config cleanup
|
16 years ago |
|
utx8245.h
|
bdab39d358
rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV
|
16 years ago |
|
v37.h
|
68d7d65100
Separate mtdparts command from jffs2
|
16 years ago |
|
v38b.h
|
d8d21e699d
boards: move board_get_enetaddr() into board-specific init
|
16 years ago |
|
v5fx30teval.h
|
6d0f6bcf33
rename CFG_ macros to CONFIG_SYS
|
17 years ago |
|
vct.h
|
736fead8fd
Convert SMC911X Ethernet driver to CONFIG_NET_MULTI API
|
16 years ago |
|
versatile.h
|
7194ab8095
Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API
|
16 years ago |
|
virtlab2.h
|
3cb7a4805f
TQM8xx* boards: set larger SMC Rx buffer len
|
16 years ago |
|
vme8349.h
|
efaf6f1bf6
mpc83xx: cosmetic comment update relating to SPD EEPROM
|
16 years ago |
|
voiceblue.h
|
7194ab8095
Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API
|
16 years ago |
|
walnut.h
|
6d0f6bcf33
rename CFG_ macros to CONFIG_SYS
|
17 years ago |
|
wepep250.h
|
379be585eb
pxa: move serial driver to drivers/serial
|
16 years ago |
|
xaeniax.h
|
7194ab8095
Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API
|
16 years ago |
|
xilinx-ppc.h
|
942556a92a
mtd: MTD related config header changes (mtdparts command)
|
16 years ago |
|
xilinx-ppc405-generic.h
|
1f4d53260e
ppc4xx: Generic architecture for xilinx ppc405(v3)
|
17 years ago |
|
xilinx-ppc405.h
|
cc2dc9b08c
ppc4xx: Merge xilinx-ppc440 and xilinx-ppc405 cfg
|
16 years ago |
|
xilinx-ppc440-generic.h
|
6d0f6bcf33
rename CFG_ macros to CONFIG_SYS
|
17 years ago |
|
xilinx-ppc440.h
|
cc2dc9b08c
ppc4xx: Merge xilinx-ppc440 and xilinx-ppc405 cfg
|
16 years ago |
|
xm250.h
|
7194ab8095
Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API
|
16 years ago |
|
xsengine.h
|
7194ab8095
Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API
|
16 years ago |
|
yosemite.h
|
6d0f6bcf33
rename CFG_ macros to CONFIG_SYS
|
17 years ago |
|
yucca.h
|
6d0f6bcf33
rename CFG_ macros to CONFIG_SYS
|
17 years ago |
|
zeus.h
|
96e21f86e8
Changed PPC4xx EMAC driver to require CONFIG_PPC4xx_EMAC
|
16 years ago |
|
zylonite.h
|
7194ab8095
Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API
|
16 years ago |
Wolfgang Denk
4f127980e0
Merge branch 'master' of git://git.denx.de/u-boot-net