NAND: Part 2: Fix warning Please define CONFIG_SYS_64BIT_VSPRINTF...

Commit 8d2effea added a warning for configurations that use NAND
without defining the (then necessary) CONFIG_SYS_64BIT_VSPRINTF but
failed to fix the affected boards.

This patch covers the non-PPC boards that were missed in the previous
patch (commit 170c1972).

Signed-off-by: Wolfgang Denk <wd@denx.de>

include/configs/afeb9260.h

@@ -106,6 +106,8 @@
 #define CONFIG_SYS_NAND_MASK_CLE		(1 << 22)
 #define CONFIG_SYS_NAND_ENABLE_PIN		AT91_PIN_PC14
 #define CONFIG_SYS_NAND_READY_PIN		AT91_PIN_PC13
+
+#define CONFIG_SYS_64BIT_VSPRINTF		/* needed for nand_util.c */
 #endif
 
 /* NOR flash - no real flash on this board */

include/configs/apollon.h

@@ -256,6 +256,8 @@
 #define	CONFIG_ENV_IS_IN_ONENAND	1
 #define CONFIG_ENV_ADDR		0x00020000
 
+#define CONFIG_SYS_64BIT_VSPRINTF		/* needed for nand_util.c */
+
 #ifdef CONFIG_SYS_USE_UBI
 #define CONFIG_CMD_MTDPARTS
 #define MTDIDS_DEFAULT		"onenand0=onenand"

include/configs/at91cap9adk.h

@@ -130,6 +130,8 @@
 #define CONFIG_SYS_MAX_NAND_DEVICE		1
 #define CONFIG_SYS_NAND_BASE			0x40000000
 #define CONFIG_SYS_NAND_DBW_8			1
+
+#define CONFIG_SYS_64BIT_VSPRINTF		/* needed for nand_util.c */
 #endif
 
 /* Ethernet */

include/configs/at91sam9260ek.h

@@ -122,6 +122,8 @@
 #define CONFIG_SYS_NAND_MASK_CLE		(1 << 22)
 #define CONFIG_SYS_NAND_ENABLE_PIN		AT91_PIN_PC14
 #define CONFIG_SYS_NAND_READY_PIN		AT91_PIN_PC13
+
+#define CONFIG_SYS_64BIT_VSPRINTF		/* needed for nand_util.c */
 #endif
 
 /* NOR flash - no real flash on this board */

include/configs/at91sam9261ek.h

@@ -132,6 +132,8 @@
 #define CONFIG_SYS_NAND_MASK_CLE		(1 << 21)
 #define CONFIG_SYS_NAND_ENABLE_PIN		AT91_PIN_PC14
 #define CONFIG_SYS_NAND_READY_PIN		AT91_PIN_PC15
+
+#define CONFIG_SYS_64BIT_VSPRINTF		/* needed for nand_util.c */
 #endif
 
 /* NOR flash - no real flash on this board */

include/configs/at91sam9263ek.h

@@ -266,6 +266,8 @@
 #define CONFIG_SYS_NAND_MASK_CLE		(1 << 22)
 #define CONFIG_SYS_NAND_ENABLE_PIN		AT91_PIN_PD15
 #define CONFIG_SYS_NAND_READY_PIN		AT91_PIN_PA22
+
+#define CONFIG_SYS_64BIT_VSPRINTF		/* needed for nand_util.c */
 #endif
 
 /* Ethernet */

include/configs/at91sam9m10g45ek.h

@@ -118,6 +118,7 @@
 /* NOR flash, if populated */
 #ifndef CONFIG_CMD_NAND
 #define CONFIG_SYS_NO_FLASH		1
+#define CONFIG_SYS_64BIT_VSPRINTF		/* needed for nand_util.c */
 #else
 #define CONFIG_SYS_FLASH_CFI		1
 #define CONFIG_FLASH_CFI_DRIVER		1
@@ -140,6 +141,8 @@
 #define CONFIG_SYS_NAND_MASK_CLE		(1 << 22)
 #define CONFIG_SYS_NAND_ENABLE_PIN		AT91_PIN_PC14
 #define CONFIG_SYS_NAND_READY_PIN		AT91_PIN_PC8
+
+#define CONFIG_SYS_64BIT_VSPRINTF		/* needed for nand_util.c */
 #endif
 
 /* Ethernet */

include/configs/at91sam9rlek.h

@@ -118,6 +118,8 @@
 #define CONFIG_SYS_NAND_MASK_CLE		(1 << 22)
 #define CONFIG_SYS_NAND_ENABLE_PIN		AT91_PIN_PB6
 #define CONFIG_SYS_NAND_READY_PIN		AT91_PIN_PD17
+
+#define CONFIG_SYS_64BIT_VSPRINTF		/* needed for nand_util.c */
 #endif
 
 /* Ethernet - not present */

include/configs/davinci_schmoogie.h

@@ -93,6 +93,7 @@
 #define CONFIG_SYS_NAND_HW_ECC
 #define CONFIG_SYS_MAX_NAND_DEVICE	1	/* Max number of NAND devices */
 #define CONFIG_ENV_OFFSET		0x0	/* Block 0--not used by bootcode */
+#define CONFIG_SYS_64BIT_VSPRINTF		/* needed for nand_util.c */
 /*=====================*/
 /* Board related stuff */
 /*=====================*/

include/configs/davinci_sffsdr.h

@@ -88,6 +88,7 @@
 #define CONFIG_SYS_NAND_HW_ECC
 #define CONFIG_SYS_MAX_NAND_DEVICE	1	/* Max number of NAND devices */
 #define CONFIG_ENV_OFFSET		0x0	/* Block 0--not used by bootcode */
+#define CONFIG_SYS_64BIT_VSPRINTF		/* needed for nand_util.c */
 /* I2C switch definitions for PCA9543 chip */
 #define CONFIG_SYS_I2C_PCA9543_ADDR		0x70
 #define CONFIG_SYS_I2C_PCA9543_ADDR_LEN	0	/* Single register. */

include/configs/delta.h

@@ -228,6 +228,8 @@
 #define CONFIG_SYS_NAND_BASE_LIST	{ CONFIG_SYS_NAND0_BASE }
 #define CONFIG_SYS_MAX_NAND_DEVICE	1	/* Max number of NAND devices */
 
+#define CONFIG_SYS_64BIT_VSPRINTF		/* needed for nand_util.c */
+
 /* nand timeout values */
 #define CONFIG_SYS_NAND_PROG_ERASE_TO	3000
 #define CONFIG_SYS_NAND_OTHER_TO	100

include/configs/meesc.h

@@ -119,6 +119,8 @@
 #define CONFIG_SYS_NAND_MASK_CLE		(1 << 22)
 #define CONFIG_SYS_NAND_ENABLE_PIN		AT91_PIN_PD15
 #define CONFIG_SYS_NAND_READY_PIN		AT91_PIN_PA22
+
+#define CONFIG_SYS_64BIT_VSPRINTF		/* needed for nand_util.c */
 #endif
 
 /* Ethernet */

include/configs/netstar.h

@@ -110,6 +110,8 @@
 #define CONFIG_SYS_NAND_BASE		0x04000000 + (2 << 23)
 #define NAND_ALLOW_ERASE_ALL		1
 
+#define CONFIG_SYS_64BIT_VSPRINTF		/* needed for nand_util.c */
+
 #define CONFIG_HARD_I2C
 #define CONFIG_SYS_I2C_SPEED		100000
 #define CONFIG_SYS_I2C_SLAVE		1

include/configs/omap3_beagle.h

@@ -142,6 +142,7 @@
 
 #define CONFIG_SYS_MAX_NAND_DEVICE	1		/* Max number of NAND */
 							/* devices */
+#define CONFIG_SYS_64BIT_VSPRINTF		/* needed for nand_util.c */
 
 #define CONFIG_JFFS2_NAND
 /* nand device jffs2 lives on */

include/configs/omap3_evm.h

@@ -138,6 +138,7 @@
 
 #define CONFIG_SYS_MAX_NAND_DEVICE	1		/* Max number of */
 							/* NAND devices */
+#define CONFIG_SYS_64BIT_VSPRINTF		/* needed for nand_util.c */
 
 #define CONFIG_JFFS2_NAND
 /* nand device jffs2 lives on */

include/configs/omap3_overo.h

@@ -128,6 +128,8 @@
 
 #define CONFIG_SYS_MAX_NAND_DEVICE	1	/* Max number of NAND */
 						/* devices */
+#define CONFIG_SYS_64BIT_VSPRINTF		/* needed for nand_util.c */
+
 #define CONFIG_JFFS2_NAND
 /* nand device jffs2 lives on */
 #define CONFIG_JFFS2_DEV		"nand0"

include/configs/omap3_pandora.h

@@ -132,6 +132,8 @@
 #define CONFIG_SYS_MAX_NAND_DEVICE	1	/* Max number of NAND */
 						/* devices */
 
+#define CONFIG_SYS_64BIT_VSPRINTF		/* needed for nand_util.c */
+
 #define CONFIG_JFFS2_NAND
 /* nand device jffs2 lives on */
 #define CONFIG_JFFS2_DEV		"nand0"

include/configs/omap3_zoom1.h

@@ -138,6 +138,9 @@
 
 #define CONFIG_SYS_MAX_NAND_DEVICE	1		/* Max number of NAND */
 							/* devices */
+
+#define CONFIG_SYS_64BIT_VSPRINTF		/* needed for nand_util.c */
+
 #define CONFIG_JFFS2_NAND
 /* nand device jffs2 lives on */
 #define CONFIG_JFFS2_DEV		"nand0"

include/configs/omap3_zoom2.h

@@ -158,6 +158,8 @@
 #define GPMC_NAND_ECC_LP_x16_LAYOUT	1
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 
+#define CONFIG_SYS_64BIT_VSPRINTF		/* needed for nand_util.c */
+
 /* Environment information */
 #define CONFIG_BOOTDELAY		10
 

include/configs/pdnb3.h

@@ -265,7 +265,8 @@
  * NAND-FLASH stuff
  */
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define CONFIG_SYS_NAND_BASE		0x51000000	/* NAND FLASH Base Address	*/
+#define CONFIG_SYS_NAND_BASE		0x51000000	/* NAND FLASH Base Address */
+#define CONFIG_SYS_64BIT_VSPRINTF			/* needed for nand_util.c */
 #endif
 
 /*

include/configs/pm9261.h

@@ -236,6 +236,8 @@
 #define CONFIG_SYS_NAND_ENABLE_PIN		AT91_PIN_PC14
 #define CONFIG_SYS_NAND_READY_PIN		AT91_PIN_PA16
 
+#define CONFIG_SYS_64BIT_VSPRINTF		/* needed for nand_util.c */
+
 
 /* NOR flash */
 #define CONFIG_SYS_FLASH_CFI			1

include/configs/pm9263.h

@@ -258,6 +258,8 @@
 #define CONFIG_SYS_NAND_MASK_CLE	(1 << 22)
 #define CONFIG_SYS_NAND_ENABLE_PIN	AT91_PIN_PD15
 #define CONFIG_SYS_NAND_READY_PIN	AT91_PIN_PB30
+
+#define CONFIG_SYS_64BIT_VSPRINTF		/* needed for nand_util.c */
 #endif
 
 #define CONFIG_CMD_JFFS2		1

include/configs/smdk6400.h

@@ -269,6 +269,8 @@
 				 48, 49, 50, 51, 52, 53, 54, 55, \
 				 56, 57, 58, 59, 60, 61, 62, 63}
 
+#define CONFIG_SYS_64BIT_VSPRINTF		/* needed for nand_util.c */
+
 /* Boot configuration (define only one of next 3) */
 #define CONFIG_BOOT_NAND
 /* None of these are currently implemented. Left from the original Samsung

include/configs/zylonite.h

@@ -206,6 +206,8 @@
 #define CONFIG_SYS_NAND_SENDCMD_RETRY	3
 #undef NAND_ALLOW_ERASE_ALL	/* Allow erasing bad blocks - don't use */
 
+#define CONFIG_SYS_64BIT_VSPRINTF		/* needed for nand_util.c */
+
 /* NAND Timing Parameters (in ns) */
 #define NAND_TIMING_tCH		10
 #define NAND_TIMING_tCS		0