Update omap5912osk board support

  - Fix OMAP support that omap5912osk compiles in current source tree
  - Update with code from "http://omap.spectrumdigital.com/osk5912"
    to fix problems with DDR initialization
  - Fix timer setup
  - Use CFI flash driver and support complete 32MB of onboard flash
  - Add "print_cpuinfo()" and "checkboard()" functions to display
    CPU (with frequency) and Board infos
Patch by Stefan Roese, 10 May 2006

CHANGELOG

@@ -2,6 +2,16 @@
 Changes since U-Boot 1.1.4:
 ======================================================================
 
+* Update omap5912osk board support
+  - Fix OMAP support that omap5912osk compiles in current source tree
+  - Update with code from "http://omap.spectrumdigital.com/osk5912"
+    to fix problems with DDR initialization
+  - Fix timer setup
+  - Use CFI flash driver and support complete 32MB of onboard flash
+  - Add "print_cpuinfo()" and "checkboard()" functions to display
+    CPU (with frequency) and Board infos
+  Patch by Stefan Roese, 10 May 2006
+
 * Fix watchdog issues for ColdFire boards.
 
 * Add M5271EVB board support.

board/omap5912osk/lowlevel_init.S

@@ -41,6 +41,13 @@ _TEXT_BASE:
 .globl lowlevel_init
 lowlevel_init:
 
+	/*------------------------------------------------------*
+	 * Ensure i-cache is enabled                            *
+	 * To configure TC regs without fetching instruction    *
+	 *------------------------------------------------------*/
+	mrc	p15, 0, r0, c1, c0
+	orr	r0, r0, #0x1000
+	mcr	p15, 0, r0, c1, c0
 
 	/*------------------------------------------------------*
 	 *mask all IRQs by setting all bits in the INTMR default*
@@ -59,33 +66,34 @@ lowlevel_init:
 	str	r1,	[r0]
 
 	/*------------------------------------------------------*
-	 * Set up ARM CLM registers (IDLECT2)  		        *
+	 * Set up ARM CLM registers (IDLECT2)                   *
 	 *------------------------------------------------------*/
 	ldr	r0,	REG_ARM_IDLECT2
 	ldr	r1,	VAL_ARM_IDLECT2
 	str	r1,	[r0]
 
 	/*------------------------------------------------------*
-	 * Set up ARM CLM registers (IDLECT3)		        *
+	 * Set up ARM CLM registers (IDLECT3)                   *
 	 *------------------------------------------------------*/
 	ldr	r0,	REG_ARM_IDLECT3
 	ldr	r1,	VAL_ARM_IDLECT3
 	str	r1,	[r0]
 
-
-	mov	r1,	#0x01		/* PER_EN bit */
+	mov	r1,	#0x01               /* PER_EN bit */
 	ldr	r0,	REG_ARM_RSTCT2
-	strh	r1,	[r0]		/* CLKM; Peripheral reset. */
+	strh	r1,	[r0]            /* CLKM; Peripheral reset. */
 
-	/* Set CLKM to Sync-Scalable	*/
-	/* I supposedly need to enable the dsp clock before switching */
-	mov	r1,	#0x0000
+	/* Set CLKM to Sync-Scalable */
+	mov	r1,	#0x1000
 	ldr	r0,	REG_ARM_SYSST
-	strh	r1,	[r0]
-	mov	r0,	#0x400
-1:
-	subs	r0,	r0,	#0x1	/* wait for any bubbles to finish */
+
+	mov	r2,	#0
+1:	cmp	r2,	#1
+	streqh	r1,	[r0]
+	add	r2,	r2,	#1
+	cmp	r2,	#0x100              /* wait for any bubbles to finish */
 	bne	1b
+
 	ldr	r1,	VAL_ARM_CKCTL
 	ldr	r0,	REG_ARM_CKCTL
 	strh	r1,	[r0]
@@ -107,17 +115,16 @@ lowlevel_init:
 	ldr	r1,	VAL_DPLL1_CTL
 	ldr	r0,	REG_DPLL1_CTL
 	strh	r1,	[r0]
-	ands	r1,	r1,	#0x10	/* Check if PLL is enabled. */
-	beq	lock_end	/* Do not look for lock if BYPASS selected */
+	ands	r1,	r1,	#0x10       /* Check if PLL is enabled. */
+	beq	lock_end                /* Do not look for lock if BYPASS selected */
 2:
 	ldrh	r1,	[r0]
-	ands	r1,	r1,	#0x01	/*	Check the LOCK bit.*/
-	beq 2b			/*	loop until bit goes hi. */
+	ands	r1,	r1,	#0x01       /* Check the LOCK bit.*/
+	beq 2b                      /* loop until bit goes hi. */
 lock_end:
 
-
 	/*------------------------------------------------------*
-	 * Turn off the watchdog during init...			*
+	 * Turn off the watchdog during init...                 *
  	 *------------------------------------------------------*/
 	ldr	r0,	REG_WATCHDOG
 	ldr	r1,	WATCHDOG_VAL1
@@ -143,30 +150,49 @@ watch2Wait:
 	tst	r1,	#0x10
 	bne	watch2Wait
 
-
 	/* Set memory timings corresponding to the new clock speed */
+	ldr	r3, VAL_SDRAM_CONFIG_SDF0
 
 	/* Check execution location to determine current execution location
 	 * and branch to appropriate initialization code.
 	 */
-	/* Load physical SDRAM base. */
-	mov 	r0, 	#0x10000000
-	/* Get current execution location. */
-	mov 	r1, 	pc
-	/* Compare. */
-	cmp 	r1, 	r0
-	/* Skip over EMIF-fast initialization if running from SDRAM. */
-	bge 	skip_sdram
+	mov	r0,	#0x10000000         /* Load physical SDRAM base. */
+	mov	r1,	pc                  /* Get current execution location. */
+	cmp	r1,	r0                  /* Compare. */
+	bge	skip_sdram              /* Skip over EMIF-fast initialization if running from SDRAM. */
+
+	/* identify the device revision, -- TMX or TMP(TMS) */
+	ldr	r0, REG_DEVICE_ID
+	ldr	r1, [r0]
+
+	ldr	r0, VAL_DEVICE_ID_TMP
+	mov	r1, r1, lsl #15
+	mov	r1, r1, lsr #16
+	cmp	r0, r1
+	bne	skip_TMP_Patch
+
+	/* Enable TMP/TMS device new features */
+	mov	r0, #1
+	ldr	r1, REG_TC_EMIFF_DOUBLER
+	str	r0, [r1]
+
+	/* Enable new ac parameters */
+	mov	r0, #0x0b
+	ldr	r1, REG_SDRAM_CONFIG2
+	str	r0, [r1]
+
+	ldr	r3, VAL_SDRAM_CONFIG_SDF1
+
+skip_TMP_Patch:
 
 	/*
 	* Delay for SDRAM initialization.
 	*/
-	mov	r3,	#0x1800		/* value should be checked */
+	mov	r0,	#0x1800		/* value should be checked */
 3:
-	subs	r3,	r3,	#0x1	/* Decrement count */
+	subs	r0,	r0,	#0x1	/* Decrement count */
 	bne 	3b
 
-
 	/*
 	 * Set SDRAM control values. Disable refresh before MRS command.
 	 */
@@ -178,14 +204,15 @@ watch2Wait:
 
 	/* config register */
 	ldr	r0,	REG_SDRAM_CONFIG
-	ldr	r1,	SDRAM_CONFIG_VAL
-	str	r1,	[r0]
+	str	r3,	[r0]
 
 	/* manual command register */
 	ldr	r0,	REG_SDRAM_MANUAL_CMD
+
 	/* issue set cke high */
 	mov	r1,	#CMD_SDRAM_CKE_SET_HIGH
 	str	r1,	[r0]
+
 	/* issue nop */
 	mov	r1,	#CMD_SDRAM_NOP
 	str	r1,	[r0]
@@ -228,25 +255,23 @@ waitMDDR1:
 	str	r1,	[r0]
 
 	/* delay loop */
-	mov	r2,	#0x0100
+	mov	r0,	#0x0100
 waitMDDR2:
-	subs	r2,	r2,	#1
+	subs	r0,	r0,	#1
 	bne	waitMDDR2
 
 	/*
 	 * Delay for SDRAM initialization.
 	 */
-	mov	r3,	#0x1800
+	mov	r0,	#0x1800
 4:
-	subs	r3,	r3,	#1	/* Decrement count. */
+	subs	r0,	r0,	#1	/* Decrement count. */
 	bne	4b
 	b	common_tc
 
 skip_sdram:
-
 	ldr	r0,	REG_SDRAM_CONFIG
-	ldr	r1,	SDRAM_CONFIG_VAL
-	str	r1,	[r0]
+	str	r3,	[r0]
 
 common_tc:
 	/* slow interface */
@@ -257,10 +282,15 @@ common_tc:
 	ldr	r1,	VAL_TC_EMIFS_CS1_CONFIG
 	ldr	r0,	REG_TC_EMIFS_CS1_CONFIG
 	str	r1,	[r0] /* Chip Select 1 */
+
 	ldr	r1,	VAL_TC_EMIFS_CS3_CONFIG
 	ldr	r0,	REG_TC_EMIFS_CS3_CONFIG
 	str	r1,	[r0] /* Chip Select 3 */
 
+	ldr	r1,	VAL_TC_EMIFS_DWS
+	ldr	r0,	REG_TC_EMIFS_DWS
+	str	r1,	[r0] /* Enable EMIFS.RDY for CS1 (ether) */
+
 #ifdef CONFIG_H2_OMAP1610
 	/* inserting additional 2 clock cycle hold time for LAN */
 	ldr     r0,     REG_TC_EMIFS_CS1_ADVANCED
@@ -282,8 +312,9 @@ common_tc:
 	/* the literal pools origin */
 	.ltorg
 
-
-REG_TC_EMIFS_CONFIG:		/* 32 bits */
+REG_DEVICE_ID:			/* 32 bits */
+	.word 0xfffe2004
+REG_TC_EMIFS_CONFIG:
 	.word 0xfffecc0c
 REG_TC_EMIFS_CS0_CONFIG:	/* 32 bits */
 	.word 0xfffecc10
@@ -293,7 +324,8 @@ REG_TC_EMIFS_CS2_CONFIG:	/* 32 bits */
 	.word 0xfffecc18
 REG_TC_EMIFS_CS3_CONFIG:	/* 32 bits */
 	.word 0xfffecc1c
-
+REG_TC_EMIFS_DWS:		/* 32 bits */
+	.word 0xfffecc40
 #ifdef CONFIG_H2_OMAP1610
 REG_TC_EMIFS_CS1_ADVANCED:	/* 32 bits */
 	.word 0xfffecc54
@@ -302,18 +334,17 @@ REG_TC_EMIFS_CS1_ADVANCED:	/* 32 bits */
 /* MPU clock/reset/power mode control registers */
 REG_ARM_CKCTL:			/* 16 bits */
 	.word 0xfffece00
-
 REG_ARM_IDLECT3:		/* 16 bits */
 	.word 0xfffece24
 REG_ARM_IDLECT2:		/* 16 bits */
 	.word 0xfffece08
 REG_ARM_IDLECT1:		/* 16 bits */
 	.word 0xfffece04
-
 REG_ARM_RSTCT2:			/* 16 bits */
 	.word 0xfffece14
 REG_ARM_SYSST:			/* 16 bits */
 	.word 0xfffece18
+
 /* DPLL control registers */
 REG_DPLL1_CTL:			/* 16 bits */
 	.word 0xfffecf00
@@ -335,6 +366,10 @@ WSPRDOG_VAL2:
  counter @8192 rows, 10 ns, 8 burst */
 REG_SDRAM_CONFIG:
 	.word 0xfffecc20
+REG_SDRAM_CONFIG2:
+	.word 0xfffecc3c
+REG_TC_EMIFF_DOUBLER:		/* 32 bits */
+	.word 0xfffecc60
 
 /* Operation register */
 REG_SDRAM_OPERATION:
@@ -356,35 +391,47 @@ REG_SDRAM_EMRS1:
 REG_DLL_WRT_CONTROL:
 	.word 0xfffecc68
 DLL_WRT_CONTROL_VAL:
-	.word 0x03f00002
+	.word 0x03f00002    /* Phase of 72deg, write offset +31  */
 
 /* URD DLL register */
 REG_DLL_URD_CONTROL:
 	.word 0xfffeccc0
 DLL_URD_CONTROL_VAL:
-	.word 0x00800002
+	.word 0x00800002    /* Phase of 72deg, read offset +31  */
 
 /* LRD DLL register */
 REG_DLL_LRD_CONTROL:
 	.word 0xfffecccc
+DLL_LRD_CONTROL_VAL:
+	.word 0x00800002    /* read offset +31  */
 
 REG_WATCHDOG:
 	.word 0xfffec808
+WATCHDOG_VAL1:
+	.word 0x000000f5
+WATCHDOG_VAL2:
+	.word 0x000000a0
 
 REG_MPU_LOAD_TIMER:
-	.word 0xfffec600
+	.word 0xfffec504
 REG_MPU_CNTL_TIMER:
 	.word 0xfffec500
+VAL_MPU_LOAD_TIMER:
+	.word 0xffffffff
+VAL_MPU_CNTL_TIMER:
+	.word 0xffffffa1
 
 /* 96 MHz Samsung Mobile DDR */
-SDRAM_CONFIG_VAL:
-	.word 0x001200f4
+/* Original setting for TMX device */
+VAL_SDRAM_CONFIG_SDF0:
+    .word 0x0014e6fe
 
-DLL_LRD_CONTROL_VAL:
-	.word 0x00800002
+/* NEW_SYS_FREQ mode (valid only TMP/TMS devices) */
+VAL_SDRAM_CONFIG_SDF1:
+    .word 0x0114e6fe
 
 VAL_ARM_CKCTL:
-	.word 0x3000
+	.word 0x2000		/* was:	0x3000, now use CLK_REF for timer input */
 VAL_DPLL1_CTL:
 	.word 0x2830
 
@@ -396,7 +443,11 @@ VAL_TC_EMIFS_CS1_CONFIG:
 VAL_TC_EMIFS_CS2_CONFIG:
 	.word 0x000055f0
 VAL_TC_EMIFS_CS3_CONFIG:
-	.word 0x88011131
+	.word 0x88013141
+VAL_TC_EMIFS_DWS:	/* Enable EMIFS.RDY for CS1 access (ether) */
+	.word 0x000000c0
+VAL_DEVICE_ID_TMP:	/* TMP/TMS=0xb65f, TMX=0xb58c */
+	.word 0xb65f
 #endif
 
 #ifdef CONFIG_H2_OMAP1610
@@ -407,36 +458,20 @@ VAL_TC_EMIFS_CS1_CONFIG:
 VAL_TC_EMIFS_CS2_CONFIG:
 	.word 0xf800f22a
 VAL_TC_EMIFS_CS3_CONFIG:
-	.word 0x88011131
+	.word 0x88013141
 VAL_TC_EMIFS_CS1_ADVANCED:
 	.word 0x00000022
 #endif
 
-VAL_TC_EMIFF_SDRAM_CONFIG:
-	.word 0x010290fc
-VAL_TC_EMIFF_MRS:
-	.word 0x00000027
-
 VAL_ARM_IDLECT1:
 	.word 0x00000400
-
 VAL_ARM_IDLECT2:
 	.word 0x00000886
 VAL_ARM_IDLECT3:
 	.word 0x00000015
 
-WATCHDOG_VAL1:
-	.word 0x000000f5
-WATCHDOG_VAL2:
-	.word 0x000000a0
-
-VAL_MPU_LOAD_TIMER:
-	.word 0xffffffff
-VAL_MPU_CNTL_TIMER:
-	.word 0xffffffa1
-
 /* command values */
-.equ CMD_SDRAM_NOP,		0x00000000
-.equ CMD_SDRAM_PRECHARGE,	0x00000001
-.equ CMD_SDRAM_AUTOREFRESH,	0x00000002
-.equ CMD_SDRAM_CKE_SET_HIGH,	0x00000007
+.equ CMD_SDRAM_NOP,             0x00000000
+.equ CMD_SDRAM_PRECHARGE,       0x00000001
+.equ CMD_SDRAM_AUTOREFRESH,     0x00000002
+.equ CMD_SDRAM_CKE_SET_HIGH,    0x00000007

board/omap5912osk/omap5912osk.c

@@ -288,3 +288,21 @@ void peripheral_power_enable (void)
 
 	*SW_CLOCK_REQUEST |= UART1_48MHZ_ENABLE;
 }
+
+/*
+ * Check Board Identity
+ */
+int checkboard(void)
+{
+	char *s = getenv("serial#");
+
+	puts("Board: OSK5912");
+
+	if (s != NULL) {
+		puts(", serial# ");
+		puts(s);
+	}
+	putc('\n');
+
+	return (0);
+}

cpu/arm926ejs/Makefile

@@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk
 LIB	= lib$(CPU).a
 
 START	= start.o
-OBJS	= interrupts.o cpu.o
+OBJS	= interrupts.o cpu.o cpuinfo.o
 
 all:	.depend $(START) $(LIB)
 

cpu/arm926ejs/cpuinfo.c

@@ -0,0 +1,245 @@
+/*
+ * OMAP1 CPU identification code
+ *
+ * Copyright (C) 2004 Nokia Corporation
+ * Written by Tony Lindgren <tony@atomide.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <common.h>
+#include <command.h>
+#include <arm926ejs.h>
+
+#if defined(CONFIG_DISPLAY_CPUINFO) && defined(CONFIG_OMAP)
+
+#define omap_readw(x)		*(volatile unsigned short *)(x)
+#define omap_readl(x)		*(volatile unsigned long *)(x)
+
+#define ARRAY_SIZE(x)		(sizeof(x) / sizeof((x)[0]))
+
+#define OMAP_DIE_ID_0		0xfffe1800
+#define OMAP_DIE_ID_1		0xfffe1804
+#define OMAP_PRODUCTION_ID_0	0xfffe2000
+#define OMAP_PRODUCTION_ID_1	0xfffe2004
+#define OMAP32_ID_0		0xfffed400
+#define OMAP32_ID_1		0xfffed404
+
+struct omap_id {
+	u16	jtag_id;	/* Used to determine OMAP type */
+	u8	die_rev;	/* Processor revision */
+	u32	omap_id;	/* OMAP revision */
+	u32	type;		/* Cpu id bits [31:08], cpu class bits [07:00] */
+};
+
+/* Register values to detect the OMAP version */
+static struct omap_id omap_ids[] = {
+	{ .jtag_id = 0xb574, .die_rev = 0x2, .omap_id = 0x03310315, .type = 0x03100000},
+	{ .jtag_id = 0x355f, .die_rev = 0x0, .omap_id = 0x03320000, .type = 0x07300100},
+	{ .jtag_id = 0xb55f, .die_rev = 0x0, .omap_id = 0x03320000, .type = 0x07300300},
+	{ .jtag_id = 0xb470, .die_rev = 0x0, .omap_id = 0x03310100, .type = 0x15100000},
+	{ .jtag_id = 0xb576, .die_rev = 0x0, .omap_id = 0x03320000, .type = 0x16100000},
+	{ .jtag_id = 0xb576, .die_rev = 0x2, .omap_id = 0x03320100, .type = 0x16110000},
+	{ .jtag_id = 0xb576, .die_rev = 0x3, .omap_id = 0x03320100, .type = 0x16100c00},
+	{ .jtag_id = 0xb576, .die_rev = 0x0, .omap_id = 0x03320200, .type = 0x16100d00},
+	{ .jtag_id = 0xb613, .die_rev = 0x0, .omap_id = 0x03320300, .type = 0x1610ef00},
+	{ .jtag_id = 0xb613, .die_rev = 0x0, .omap_id = 0x03320300, .type = 0x1610ef00},
+	{ .jtag_id = 0xb576, .die_rev = 0x1, .omap_id = 0x03320100, .type = 0x16110000},
+	{ .jtag_id = 0xb58c, .die_rev = 0x2, .omap_id = 0x03320200, .type = 0x16110b00},
+	{ .jtag_id = 0xb58c, .die_rev = 0x3, .omap_id = 0x03320200, .type = 0x16110c00},
+	{ .jtag_id = 0xb65f, .die_rev = 0x0, .omap_id = 0x03320400, .type = 0x16212300},
+	{ .jtag_id = 0xb65f, .die_rev = 0x1, .omap_id = 0x03320400, .type = 0x16212300},
+	{ .jtag_id = 0xb65f, .die_rev = 0x1, .omap_id = 0x03320500, .type = 0x16212300},
+	{ .jtag_id = 0xb5f7, .die_rev = 0x0, .omap_id = 0x03330000, .type = 0x17100000},
+	{ .jtag_id = 0xb5f7, .die_rev = 0x1, .omap_id = 0x03330100, .type = 0x17100000},
+	{ .jtag_id = 0xb5f7, .die_rev = 0x2, .omap_id = 0x03330100, .type = 0x17100000},
+};
+
+/*
+ * Get OMAP type from PROD_ID.
+ * 1710 has the PROD_ID in bits 15:00, not in 16:01 as documented in TRM.
+ * 1510 PROD_ID is empty, and 1610 PROD_ID does not make sense.
+ * Undocumented register in TEST BLOCK is used as fallback; This seems to
+ * work on 1510, 1610 & 1710. The official way hopefully will work in future
+ * processors.
+ */
+static u16 omap_get_jtag_id(void)
+{
+	u32 prod_id, omap_id;
+
+	prod_id = omap_readl(OMAP_PRODUCTION_ID_1);
+	omap_id = omap_readl(OMAP32_ID_1);
+
+	/* Check for unusable OMAP_PRODUCTION_ID_1 on 1611B/5912 and 730 */
+	if (((prod_id >> 20) == 0) || (prod_id == omap_id))
+		prod_id = 0;
+	else
+		prod_id &= 0xffff;
+
+	if (prod_id)
+		return prod_id;
+
+	/* Use OMAP32_ID_1 as fallback */
+	prod_id = ((omap_id >> 12) & 0xffff);
+
+	return prod_id;
+}
+
+/*
+ * Get OMAP revision from DIE_REV.
+ * Early 1710 processors may have broken OMAP_DIE_ID, it contains PROD_ID.
+ * Undocumented register in the TEST BLOCK is used as fallback.
+ * REVISIT: This does not seem to work on 1510
+ */
+static u8 omap_get_die_rev(void)
+{
+	u32 die_rev;
+
+	die_rev = omap_readl(OMAP_DIE_ID_1);
+
+	/* Check for broken OMAP_DIE_ID on early 1710 */
+	if (((die_rev >> 12) & 0xffff) == omap_get_jtag_id())
+		die_rev = 0;
+
+	die_rev = (die_rev >> 17) & 0xf;
+	if (die_rev)
+		return die_rev;
+
+	die_rev = (omap_readl(OMAP32_ID_1) >> 28) & 0xf;
+
+	return die_rev;
+}
+
+static unsigned long dpll1(void)
+{
+	unsigned short pll_ctl_val = omap_readw(DPLL_CTL_REG);
+	unsigned long rate;
+
+	rate = CONFIG_SYS_CLK_FREQ; /* Base xtal rate */
+	if (pll_ctl_val & 0x10) {
+		/* PLL enabled, apply multiplier and divisor */
+		if (pll_ctl_val & 0xf80)
+			rate *= (pll_ctl_val & 0xf80) >> 7;
+		rate /= ((pll_ctl_val & 0x60) >> 5) + 1;
+	} else {
+		/* PLL disabled, apply bypass divisor */
+		switch (pll_ctl_val & 0xc) {
+		case 0:
+			break;
+		case 0x4:
+			rate /= 2;
+			break;
+		default:
+			rate /= 4;
+			break;
+		}
+	}
+
+	return rate;
+}
+
+static unsigned long armcore(void)
+{
+	unsigned short arm_ckctl = omap_readw(ARM_CKCTL);
+
+	return (dpll1() >> ((arm_ckctl & 0x0030) >> 4));
+}
+
+int print_cpuinfo (void)
+{
+	int i;
+	u16 jtag_id;
+	u8 die_rev;
+	u32 omap_id;
+	u8 cpu_type;
+	u32 system_serial_high;
+	u32 system_serial_low;
+	u32 system_rev = 0;
+
+	jtag_id = omap_get_jtag_id();
+	die_rev = omap_get_die_rev();
+	omap_id = omap_readl(OMAP32_ID_0);
+
+#ifdef DEBUG
+	printf("OMAP_DIE_ID_0: 0x%08x\n", omap_readl(OMAP_DIE_ID_0));
+	printf("OMAP_DIE_ID_1: 0x%08x DIE_REV: %i\n",
+	       omap_readl(OMAP_DIE_ID_1),
+	       (omap_readl(OMAP_DIE_ID_1) >> 17) & 0xf);
+	printf("OMAP_PRODUCTION_ID_0: 0x%08x\n", omap_readl(OMAP_PRODUCTION_ID_0));
+	printf("OMAP_PRODUCTION_ID_1: 0x%08x JTAG_ID: 0x%04x\n",
+	       omap_readl(OMAP_PRODUCTION_ID_1),
+	       omap_readl(OMAP_PRODUCTION_ID_1) & 0xffff);
+	printf("OMAP32_ID_0: 0x%08x\n", omap_readl(OMAP32_ID_0));
+	printf("OMAP32_ID_1: 0x%08x\n", omap_readl(OMAP32_ID_1));
+	printf("JTAG_ID: 0x%04x DIE_REV: %i\n", jtag_id, die_rev);
+#endif
+
+	system_serial_high = omap_readl(OMAP_DIE_ID_0);
+	system_serial_low = omap_readl(OMAP_DIE_ID_1);
+
+	/* First check only the major version in a safe way */
+	for (i = 0; i < ARRAY_SIZE(omap_ids); i++) {
+		if (jtag_id == (omap_ids[i].jtag_id)) {
+			system_rev = omap_ids[i].type;
+			break;
+		}
+	}
+
+	/* Check if we can find the die revision */
+	for (i = 0; i < ARRAY_SIZE(omap_ids); i++) {
+		if (jtag_id == omap_ids[i].jtag_id && die_rev == omap_ids[i].die_rev) {
+			system_rev = omap_ids[i].type;
+			break;
+		}
+	}
+
+	/* Finally check also the omap_id */
+	for (i = 0; i < ARRAY_SIZE(omap_ids); i++) {
+		if (jtag_id == omap_ids[i].jtag_id
+		    && die_rev == omap_ids[i].die_rev
+		    && omap_id == omap_ids[i].omap_id) {
+			system_rev = omap_ids[i].type;
+			break;
+		}
+	}
+
+	/* Add the cpu class info (7xx, 15xx, 16xx, 24xx) */
+	cpu_type = system_rev >> 24;
+
+	switch (cpu_type) {
+	case 0x07:
+		system_rev |= 0x07;
+		break;
+	case 0x03:
+	case 0x15:
+		system_rev |= 0x15;
+		break;
+	case 0x16:
+	case 0x17:
+		system_rev |= 0x16;
+		break;
+	case 0x24:
+		system_rev |= 0x24;
+		break;
+	default:
+		printf("Unknown OMAP cpu type: 0x%02x\n", cpu_type);
+	}
+
+	printf("CPU:   OMAP%04x", system_rev >> 16);
+	if ((system_rev >> 8) & 0xff)
+		printf("%x", (system_rev >> 8) & 0xff);
+#ifdef DEBUG
+	printf(" revision %i handled as %02xxx id: %08x%08x",
+	       die_rev, system_rev & 0xff, system_serial_low, system_serial_high);
+#endif
+	printf(" at %ld.%01ld MHz (DPLL1=%ld.%01ld MHz)\n",
+	       armcore() / 1000000, (armcore() / 100000) % 10,
+	       dpll1() / 1000000, (dpll1() / 100000) % 10);
+
+	return 0;
+}
+
+#endif /* #if defined(CONFIG_DISPLAY_CPUINFO) && defined(CONFIG_OMAP) */
+

include/asm-arm/arch-omap/sizes.h

@@ -0,0 +1,52 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+/* DO NOT EDIT!! - this file automatically generated
+ *                 from .s file by awk -f s2h.awk
+ */
+/*  Size defintions
+ *  Copyright (C) ARM Limited 1998. All rights reserved.
+ */
+
+#ifndef __sizes_h
+#define __sizes_h                       1
+
+/* handy sizes */
+#define SZ_1K                           0x00000400
+#define SZ_4K                           0x00001000
+#define SZ_8K                           0x00002000
+#define SZ_16K                          0x00004000
+#define SZ_64K                          0x00010000
+#define SZ_128K                         0x00020000
+#define SZ_256K                         0x00040000
+#define SZ_512K                         0x00080000
+
+#define SZ_1M                           0x00100000
+#define SZ_2M                           0x00200000
+#define SZ_4M                           0x00400000
+#define SZ_8M                           0x00800000
+#define SZ_16M                          0x01000000
+#define SZ_32M                          0x02000000
+#define SZ_64M                          0x04000000
+#define SZ_128M                         0x08000000
+#define SZ_256M                         0x10000000
+#define SZ_512M                         0x20000000
+
+#define SZ_1G                           0x40000000
+#define SZ_2G                           0x80000000
+
+#endif
+
+/*         END */

include/configs/omap5912osk.h

@@ -35,6 +35,9 @@
 #define CONFIG_OMAP1610	1		/* 5912 is same as 1610  */
 #define CONFIG_OSK_OMAP5912	1	/*  a OSK Board  */
 
+#define CONFIG_DISPLAY_CPUINFO	1	/* display cpu info (and speed)	*/
+#define CONFIG_DISPLAY_BOARDINFO 1	/* display board info		*/
+
 /* input clock of PLL */
 /* the OMAP5912 OSK has 12MHz input clock */
 #define CONFIG_SYS_CLK_FREQ	12000000
@@ -45,11 +48,13 @@
 
 #define CONFIG_CMDLINE_TAG	1	/* enable passing of ATAGs  */
 #define CONFIG_SETUP_MEMORY_TAGS	1
+#define CONFIG_INITRD_TAG      1       /* Required for ramdisk support */
 
 /*
  * Size of malloc() pool
  */
 #define CFG_MALLOC_LEN	(CFG_ENV_SIZE + 128*1024)
+#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
 
 /*
  * Hardware drivers
@@ -142,27 +147,44 @@
  * Physical Memory Map
  */
 #define CONFIG_NR_DRAM_BANKS	1	/* we have 1 bank of DRAM */
-#define PHYS_SDRAM_1	0x10000000	/* SDRAM Bank #1 */
+#define PHYS_SDRAM_1		0x10000000	/* SDRAM Bank #1 */
 #define PHYS_SDRAM_1_SIZE	0x02000000	/* 32 MB */
 
-#define PHYS_FLASH_1	0x00000000	/* Flash Bank #1 */
+#define PHYS_FLASH_1		0x00000000	/* Flash Bank #1 */
+#define PHYS_FLASH_2		0x01000000	/* Flash Bank #2 */
+
+#define CFG_FLASH_BASE		PHYS_FLASH_1
 
-#define CFG_FLASH_BASE	PHYS_FLASH_1
+#define CFG_MONITOR_BASE       CFG_FLASH_BASE  /* Monitor at beginning of flash */
 
 /*-----------------------------------------------------------------------
- * FLASH and environment organization
+ * FLASH driver setup
  */
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks */
+#define CFG_FLASH_CFI          1       /* Flash memory is CFI compliant */
+#define CFG_FLASH_CFI_DRIVER   1       /* Use drivers/cfi_flash.c */
+
+#define CFG_FLASH_BANKS_LIST { PHYS_FLASH_1, PHYS_FLASH_2 }
+
+#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks */
 #define PHYS_FLASH_SIZE	0x02000000	/* 32MB */
 #define CFG_MAX_FLASH_SECT	(259)	/* max number of sectors on one chip */
-/* addr of environment */
-#define CFG_ENV_ADDR	(CFG_FLASH_BASE + 0x020000)
+
+#define CFG_FLASH_USE_BUFFER_WRITE     1       /* Use buffered writes (~10x faster) */
+#define CFG_FLASH_PROTECTION   1       /* Use hardware sector protection */
+
+#define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
 
 /* timeout values are in ticks */
 #define CFG_FLASH_ERASE_TOUT	(20*CFG_HZ)	/* Timeout for Flash Erase */
 #define CFG_FLASH_WRITE_TOUT	(20*CFG_HZ)	/* Timeout for Flash Write */
 
+/*-----------------------------------------------------------------------
+ * FLASH and environment organization
+ */
 #define CFG_ENV_IS_IN_FLASH	1
+/* addr of environment */
+#define CFG_ENV_ADDR	(CFG_FLASH_BASE + 0x020000)
+
 #define CFG_ENV_SIZE	0x20000	/* Total Size of Environment Sector */
 #define CFG_ENV_OFFSET	0x20000	/* environment starts here  */