Merge branch 'linus' into x86/apic

Conflicts:
	arch/x86/mach-default/setup.c

Semantic conflict resolution:
	arch/x86/kernel/setup.c

Signed-off-by: Ingo Molnar <mingo@elte.hu>

CREDITS

@@ -2166,7 +2166,6 @@ D: Initial implementation of VC's, pty's and select()
 
 N: Pavel Machek
 E: pavel@ucw.cz
-E: pavel@suse.cz
 D: Softcursor for vga, hypertech cdrom support, vcsa bugfix, nbd
 D: sun4/330 port, capabilities for elf, speedup for rm on ext2, USB,
 D: work on suspend-to-ram/disk, killing duplicates from ioctl32

Documentation/ABI/testing/sysfs-firmware-memmap

@@ -1,6 +1,6 @@
 What:		/sys/firmware/memmap/
 Date:		June 2008
-Contact:	Bernhard Walle <bwalle@suse.de>
+Contact:	Bernhard Walle <bernhard.walle@gmx.de>
 Description:
 		On all platforms, the firmware provides a memory map which the
 		kernel reads. The resources from that memory map are registered

Documentation/PCI/PCIEBUS-HOWTO.txt

@@ -93,7 +93,7 @@ the PCI Express Port Bus driver from loading a service driver.
 
 int pcie_port_service_register(struct pcie_port_service_driver *new)
 
-This API replaces the Linux Driver Model's pci_module_init API. A
+This API replaces the Linux Driver Model's pci_register_driver API. A
 service driver should always calls pcie_port_service_register at
 module init. Note that after service driver being loaded, calls
 such as pci_enable_device(dev) and pci_set_master(dev) are no longer

Documentation/cgroups/cgroups.txt

@@ -252,10 +252,8 @@ cgroup file system directories.
 When a task is moved from one cgroup to another, it gets a new
 css_set pointer - if there's an already existing css_set with the
 desired collection of cgroups then that group is reused, else a new
-css_set is allocated. Note that the current implementation uses a
-linear search to locate an appropriate existing css_set, so isn't
-very efficient. A future version will use a hash table for better
-performance.
+css_set is allocated. The appropriate existing css_set is located by
+looking into a hash table.
 
 To allow access from a cgroup to the css_sets (and hence tasks)
 that comprise it, a set of cg_cgroup_link objects form a lattice;

Documentation/cgroups/cpusets.txt

@@ -142,7 +142,7 @@ into the rest of the kernel, none in performance critical paths:
  - in fork and exit, to attach and detach a task from its cpuset.
  - in sched_setaffinity, to mask the requested CPUs by what's
    allowed in that tasks cpuset.
- - in sched.c migrate_all_tasks(), to keep migrating tasks within
+ - in sched.c migrate_live_tasks(), to keep migrating tasks within
    the CPUs allowed by their cpuset, if possible.
  - in the mbind and set_mempolicy system calls, to mask the requested
    Memory Nodes by what's allowed in that tasks cpuset.
@@ -175,6 +175,10 @@ files describing that cpuset:
  - mem_exclusive flag: is memory placement exclusive?
  - mem_hardwall flag:  is memory allocation hardwalled
  - memory_pressure: measure of how much paging pressure in cpuset
+ - memory_spread_page flag: if set, spread page cache evenly on allowed nodes
+ - memory_spread_slab flag: if set, spread slab cache evenly on allowed nodes
+ - sched_load_balance flag: if set, load balance within CPUs on that cpuset
+ - sched_relax_domain_level: the searching range when migrating tasks
 
 In addition, the root cpuset only has the following file:
  - memory_pressure_enabled flag: compute memory_pressure?
@@ -252,7 +256,7 @@ is causing.
 
 This is useful both on tightly managed systems running a wide mix of
 submitted jobs, which may choose to terminate or re-prioritize jobs that
-are trying to use more memory than allowed on the nodes assigned them,
+are trying to use more memory than allowed on the nodes assigned to them,
 and with tightly coupled, long running, massively parallel scientific
 computing jobs that will dramatically fail to meet required performance
 goals if they start to use more memory than allowed to them.
@@ -378,7 +382,7 @@ as cpusets and sched_setaffinity.
 The algorithmic cost of load balancing and its impact on key shared
 kernel data structures such as the task list increases more than
 linearly with the number of CPUs being balanced.  So the scheduler
-has support to  partition the systems CPUs into a number of sched
+has support to partition the systems CPUs into a number of sched
 domains such that it only load balances within each sched domain.
 Each sched domain covers some subset of the CPUs in the system;
 no two sched domains overlap; some CPUs might not be in any sched
@@ -485,17 +489,22 @@ of CPUs allowed to a cpuset having 'sched_load_balance' enabled.
 The internal kernel cpuset to scheduler interface passes from the
 cpuset code to the scheduler code a partition of the load balanced
 CPUs in the system. This partition is a set of subsets (represented
-as an array of cpumask_t) of CPUs, pairwise disjoint, that cover all
-the CPUs that must be load balanced.
-
-Whenever the 'sched_load_balance' flag changes, or CPUs come or go
-from a cpuset with this flag enabled, or a cpuset with this flag
-enabled is removed, the cpuset code builds a new such partition and
-passes it to the scheduler sched domain setup code, to have the sched
-domains rebuilt as necessary.
+as an array of struct cpumask) of CPUs, pairwise disjoint, that cover
+all the CPUs that must be load balanced.
+
+The cpuset code builds a new such partition and passes it to the
+scheduler sched domain setup code, to have the sched domains rebuilt
+as necessary, whenever:
+ - the 'sched_load_balance' flag of a cpuset with non-empty CPUs changes,
+ - or CPUs come or go from a cpuset with this flag enabled,
+ - or 'sched_relax_domain_level' value of a cpuset with non-empty CPUs
+   and with this flag enabled changes,
+ - or a cpuset with non-empty CPUs and with this flag enabled is removed,
+ - or a cpu is offlined/onlined.
 
 This partition exactly defines what sched domains the scheduler should
-setup - one sched domain for each element (cpumask_t) in the partition.
+setup - one sched domain for each element (struct cpumask) in the
+partition.
 
 The scheduler remembers the currently active sched domain partitions.
 When the scheduler routine partition_sched_domains() is invoked from
@@ -559,7 +568,7 @@ domain, the largest value among those is used.  Be careful, if one
 requests 0 and others are -1 then 0 is used.
 
 Note that modifying this file will have both good and bad effects,
-and whether it is acceptable or not will be depend on your situation.
+and whether it is acceptable or not depends on your situation.
 Don't modify this file if you are not sure.
 
 If your situation is:
@@ -600,19 +609,15 @@ to allocate a page of memory for that task.
 
 If a cpuset has its 'cpus' modified, then each task in that cpuset
 will have its allowed CPU placement changed immediately.  Similarly,
-if a tasks pid is written to a cpusets 'tasks' file, in either its
-current cpuset or another cpuset, then its allowed CPU placement is
-changed immediately.  If such a task had been bound to some subset
-of its cpuset using the sched_setaffinity() call, the task will be
-allowed to run on any CPU allowed in its new cpuset, negating the
-affect of the prior sched_setaffinity() call.
+if a tasks pid is written to another cpusets 'tasks' file, then its
+allowed CPU placement is changed immediately.  If such a task had been
+bound to some subset of its cpuset using the sched_setaffinity() call,
+the task will be allowed to run on any CPU allowed in its new cpuset,
+negating the effect of the prior sched_setaffinity() call.
 
 In summary, the memory placement of a task whose cpuset is changed is
 updated by the kernel, on the next allocation of a page for that task,
-but the processor placement is not updated, until that tasks pid is
-rewritten to the 'tasks' file of its cpuset.  This is done to avoid
-impacting the scheduler code in the kernel with a check for changes
-in a tasks processor placement.
+and the processor placement is updated immediately.
 
 Normally, once a page is allocated (given a physical page
 of main memory) then that page stays on whatever node it
@@ -681,10 +686,14 @@ and then start a subshell 'sh' in that cpuset:
   # The next line should display '/Charlie'
   cat /proc/self/cpuset
 
-In the future, a C library interface to cpusets will likely be
-available.  For now, the only way to query or modify cpusets is
-via the cpuset file system, using the various cd, mkdir, echo, cat,
-rmdir commands from the shell, or their equivalent from C.
+There are ways to query or modify cpusets:
+ - via the cpuset file system directly, using the various cd, mkdir, echo,
+   cat, rmdir commands from the shell, or their equivalent from C.
+ - via the C library libcpuset.
+ - via the C library libcgroup.
+   (http://sourceforge.net/proects/libcg/)
+ - via the python application cset.
+   (http://developer.novell.com/wiki/index.php/Cpuset)
 
 The sched_setaffinity calls can also be done at the shell prompt using
 SGI's runon or Robert Love's taskset.  The mbind and set_mempolicy
@@ -756,7 +765,7 @@ mount -t cpuset X /dev/cpuset
 
 is equivalent to
 
-mount -t cgroup -ocpuset X /dev/cpuset
+mount -t cgroup -ocpuset,noprefix X /dev/cpuset
 echo "/sbin/cpuset_release_agent" > /dev/cpuset/release_agent
 
 2.2 Adding/removing cpus

Documentation/driver-model/device.txt

@@ -127,9 +127,11 @@ void unlock_device(struct device * dev);
 Attributes
 ~~~~~~~~~~
 struct device_attribute {
-        struct attribute        attr;
-        ssize_t (*show)(struct device * dev, char * buf, size_t count, loff_t off);
-        ssize_t (*store)(struct device * dev, const char * buf, size_t count, loff_t off);
+	struct attribute	attr;
+	ssize_t (*show)(struct device *dev, struct device_attribute *attr,
+			char *buf);
+	ssize_t (*store)(struct device *dev, struct device_attribute *attr,
+			 const char *buf, size_t count);
 };
 
 Attributes of devices can be exported via drivers using a simple

Documentation/filesystems/sysfs.txt

@@ -2,8 +2,10 @@
 sysfs - _The_ filesystem for exporting kernel objects. 
 
 Patrick Mochel	<mochel@osdl.org>
+Mike Murphy <mamurph@cs.clemson.edu>
 
-10 January 2003
+Revised:    22 February 2009
+Original:   10 January 2003
 
 
 What it is:
@@ -64,12 +66,13 @@ An attribute definition is simply:
 
 struct attribute {
         char                    * name;
+        struct module		*owner;
         mode_t                  mode;
 };
 
 
-int sysfs_create_file(struct kobject * kobj, struct attribute * attr);
-void sysfs_remove_file(struct kobject * kobj, struct attribute * attr);
+int sysfs_create_file(struct kobject * kobj, const struct attribute * attr);
+void sysfs_remove_file(struct kobject * kobj, const struct attribute * attr);
 
 
 A bare attribute contains no means to read or write the value of the
@@ -80,9 +83,11 @@ a specific object type.
 For example, the driver model defines struct device_attribute like:
 
 struct device_attribute {
-        struct attribute        attr;
-        ssize_t (*show)(struct device * dev, char * buf);
-        ssize_t (*store)(struct device * dev, const char * buf);
+	struct attribute	attr;
+	ssize_t (*show)(struct device *dev, struct device_attribute *attr,
+			char *buf);
+	ssize_t (*store)(struct device *dev, struct device_attribute *attr,
+			 const char *buf, size_t count);
 };
 
 int device_create_file(struct device *, struct device_attribute *);
@@ -90,12 +95,8 @@ void device_remove_file(struct device *, struct device_attribute *);
 
 It also defines this helper for defining device attributes: 
 
-#define DEVICE_ATTR(_name, _mode, _show, _store)      \
-struct device_attribute dev_attr_##_name = {            \
-        .attr = {.name  = __stringify(_name) , .mode   = _mode },      \
-        .show   = _show,                                \
-        .store  = _store,                               \
-};
+#define DEVICE_ATTR(_name, _mode, _show, _store) \
+struct device_attribute dev_attr_##_name = __ATTR(_name, _mode, _show, _store)
 
 For example, declaring
 
@@ -107,9 +108,9 @@ static struct device_attribute dev_attr_foo = {
        .attr	= {
 		.name = "foo",
 		.mode = S_IWUSR | S_IRUGO,
+		.show = show_foo,
+		.store = store_foo,
 	},
-	.show = show_foo,
-	.store = store_foo,
 };
 
 
@@ -161,10 +162,12 @@ To read or write attributes, show() or store() methods must be
 specified when declaring the attribute. The method types should be as
 simple as those defined for device attributes:
 
-        ssize_t (*show)(struct device * dev, char * buf);
-        ssize_t (*store)(struct device * dev, const char * buf);
+ssize_t (*show)(struct device * dev, struct device_attribute * attr,
+                char * buf);
+ssize_t (*store)(struct device * dev, struct device_attribute * attr,
+                 const char * buf);
 
-IOW, they should take only an object and a buffer as parameters. 
+IOW, they should take only an object, an attribute, and a buffer as parameters.
 
 
 sysfs allocates a buffer of size (PAGE_SIZE) and passes it to the
@@ -299,14 +302,16 @@ The following interface layers currently exist in sysfs:
 Structure:
 
 struct device_attribute {
-        struct attribute        attr;
-        ssize_t (*show)(struct device * dev, char * buf);
-        ssize_t (*store)(struct device * dev, const char * buf);
+	struct attribute	attr;
+	ssize_t (*show)(struct device *dev, struct device_attribute *attr,
+			char *buf);
+	ssize_t (*store)(struct device *dev, struct device_attribute *attr,
+			 const char *buf, size_t count);
 };
 
 Declaring:
 
-DEVICE_ATTR(_name, _str, _mode, _show, _store);
+DEVICE_ATTR(_name, _mode, _show, _store);
 
 Creation/Removal:
 
@@ -342,7 +347,8 @@ Structure:
 struct driver_attribute {
         struct attribute        attr;
         ssize_t (*show)(struct device_driver *, char * buf);
-        ssize_t (*store)(struct device_driver *, const char * buf);
+        ssize_t (*store)(struct device_driver *, const char * buf,
+                         size_t count);
 };
 
 Declaring:

Documentation/hwmon/hpfall.c

@@ -0,0 +1,101 @@
+/* Disk protection for HP machines.
+ *
+ * Copyright 2008 Eric Piel
+ * Copyright 2009 Pavel Machek <pavel@suse.cz>
+ *
+ * GPLv2.
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <fcntl.h>
+#include <sys/stat.h>
+#include <sys/types.h>
+#include <string.h>
+#include <stdint.h>
+#include <errno.h>
+#include <signal.h>
+
+void write_int(char *path, int i)
+{
+	char buf[1024];
+	int fd = open(path, O_RDWR);
+	if (fd < 0) {
+		perror("open");
+		exit(1);
+	}
+	sprintf(buf, "%d", i);
+	if (write(fd, buf, strlen(buf)) != strlen(buf)) {
+		perror("write");
+		exit(1);
+	}
+	close(fd);
+}
+
+void set_led(int on)
+{
+	write_int("/sys/class/leds/hp::hddprotect/brightness", on);
+}
+
+void protect(int seconds)
+{
+	write_int("/sys/block/sda/device/unload_heads", seconds*1000);
+}
+
+int on_ac(void)
+{
+//	/sys/class/power_supply/AC0/online
+}
+
+int lid_open(void)
+{
+//	/proc/acpi/button/lid/LID/state
+}
+
+void ignore_me(void)
+{
+	protect(0);
+	set_led(0);
+
+}
+
+int main(int argc, char* argv[])
+{
+       int fd, ret;
+
+       fd = open("/dev/freefall", O_RDONLY);
+       if (fd < 0) {
+               perror("open");
+               return EXIT_FAILURE;
+       }
+
+	signal(SIGALRM, ignore_me);
+
+       for (;;) {
+	       unsigned char count;
+
+               ret = read(fd, &count, sizeof(count));
+	       alarm(0);
+	       if ((ret == -1) && (errno == EINTR)) {
+		       /* Alarm expired, time to unpark the heads */
+		       continue;
+	       }
+
+               if (ret != sizeof(count)) {
+                       perror("read");
+                       break;
+               }
+
+	       protect(21);
+	       set_led(1);
+	       if (1 || on_ac() || lid_open()) {
+		       alarm(2);
+	       } else {
+		       alarm(20);
+	       }
+       }
+
+       close(fd);
+       return EXIT_SUCCESS;
+}

Documentation/hwmon/lis3lv02d

@@ -33,6 +33,14 @@ rate - reports the sampling rate of the accelerometer device in HZ
 This driver also provides an absolute input class device, allowing
 the laptop to act as a pinball machine-esque joystick.
 
+Another feature of the driver is misc device called "freefall" that
+acts similar to /dev/rtc and reacts on free-fall interrupts received
+from the device. It supports blocking operations, poll/select and
+fasync operation modes. You must read 1 bytes from the device.  The
+result is number of free-fall interrupts since the last successful
+read (or 255 if number of interrupts would not fit).
+
+
 Axes orientation
 ----------------
 

Documentation/tracers/mmiotrace.txt

@@ -78,12 +78,10 @@ to view your kernel log and look for "mmiotrace has lost events" warning. If
 events were lost, the trace is incomplete. You should enlarge the buffers and
 try again. Buffers are enlarged by first seeing how large the current buffers
 are:
-$ cat /debug/tracing/trace_entries
+$ cat /debug/tracing/buffer_size_kb
 gives you a number. Approximately double this number and write it back, for
 instance:
-$ echo 0 > /debug/tracing/tracing_enabled
-$ echo 128000 > /debug/tracing/trace_entries
-$ echo 1 > /debug/tracing/tracing_enabled
+$ echo 128000 > /debug/tracing/buffer_size_kb
 Then start again from the top.
 
 If you are doing a trace for a driver project, e.g. Nouveau, you should also

MAINTAINERS

@@ -692,6 +692,13 @@ M:	kernel@wantstofly.org
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Maintained
 
+ARM/NUVOTON W90X900 ARM ARCHITECTURE
+P:      Wan ZongShun
+M:      mcuos.com@gmail.com
+L:      linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
+W:      http://www.mcuos.com
+S:      Maintained
+
 ARPD SUPPORT
 P:	Jonathan Layes
 L:	netdev@vger.kernel.org
@@ -1905,10 +1912,10 @@ W:	http://gigaset307x.sourceforge.net/
 S:	Maintained
 
 HARD DRIVE ACTIVE PROTECTION SYSTEM (HDAPS) DRIVER
-P:	Robert Love
-M:	rlove@rlove.org
-M:	linux-kernel@vger.kernel.org
-W:	http://www.kernel.org/pub/linux/kernel/people/rml/hdaps/
+P:	Frank Seidel
+M:	frank@f-seidel.de
+L:	lm-sensors@lm-sensors.org
+W:	http://www.kernel.org/pub/linux/kernel/people/fseidel/hdaps/
 S:	Maintained
 
 GSPCA FINEPIX SUBDRIVER
@@ -2001,7 +2008,7 @@ S:	Maintained
 
 HIBERNATION (aka Software Suspend, aka swsusp)
 P:	Pavel Machek
-M:	pavel@suse.cz
+M:	pavel@ucw.cz
 P:	Rafael J. Wysocki
 M:	rjw@sisk.pl
 L:	linux-pm@lists.linux-foundation.org
@@ -3327,8 +3334,8 @@ P:	Jeremy Fitzhardinge
 M:	jeremy@xensource.com
 P:	Chris Wright
 M:	chrisw@sous-sol.org
-P:	Zachary Amsden
-M:	zach@vmware.com
+P:	Alok Kataria
+M:	akataria@vmware.com
 P:	Rusty Russell
 M:	rusty@rustcorp.com.au
 L:	virtualization@lists.osdl.org
@@ -4172,7 +4179,7 @@ SUSPEND TO RAM
 P:	Len Brown
 M:	len.brown@intel.com
 P:	Pavel Machek
-M:	pavel@suse.cz
+M:	pavel@ucw.cz
 P:	Rafael J. Wysocki
 M:	rjw@sisk.pl
 L:	linux-pm@lists.linux-foundation.org
@@ -4924,11 +4931,11 @@ L:	zd1211-devs@lists.sourceforge.net (subscribers-only)
 S:	Maintained
 
 ZR36067 VIDEO FOR LINUX DRIVER
-P:	Ronald Bultje
-M:	rbultje@ronald.bitfreak.net
 L:	mjpeg-users@lists.sourceforge.net
+L:	linux-media@vger.kernel.org
 W:	http://mjpeg.sourceforge.net/driver-zoran/
-S:	Maintained
+T:	Mercurial http://linuxtv.org/hg/v4l-dvb
+S:	Odd Fixes
 
 ZS DECSTATION Z85C30 SERIAL DRIVER
 P:	Maciej W. Rozycki

Makefile

@@ -389,6 +389,7 @@ PHONY += outputmakefile
 # output directory.
 outputmakefile:
 ifneq ($(KBUILD_SRC),)
+	$(Q)ln -fsn $(srctree) source
 	$(Q)$(CONFIG_SHELL) $(srctree)/scripts/mkmakefile \
 	    $(srctree) $(objtree) $(VERSION) $(PATCHLEVEL)
 endif
@@ -947,7 +948,6 @@ ifneq ($(KBUILD_SRC),)
 	    mkdir -p include2;                                          \
 	    ln -fsn $(srctree)/include/asm-$(SRCARCH) include2/asm;     \
 	fi
-	ln -fsn $(srctree) source
 endif
 
 # prepare2 creates a makefile if using a separate output directory

README

@@ -188,7 +188,7 @@ CONFIGURING the kernel:
 			   values to random values.
 
    You can find more information on using the Linux kernel config tools
-   in Documentation/kbuild/make-configs.txt.
+   in Documentation/kbuild/kconfig.txt.
 
 	NOTES on "make config":
 	- having unnecessary drivers will make the kernel bigger, and can

arch/alpha/kernel/process.c

@@ -93,8 +93,8 @@ common_shutdown_1(void *generic_ptr)
 	if (cpuid != boot_cpuid) {
 		flags |= 0x00040000UL; /* "remain halted" */
 		*pflags = flags;
-		cpu_clear(cpuid, cpu_present_map);
-		cpu_clear(cpuid, cpu_possible_map);
+		set_cpu_present(cpuid, false);
+		set_cpu_possible(cpuid, false);
 		halt();
 	}
 #endif
@@ -120,8 +120,8 @@ common_shutdown_1(void *generic_ptr)
 
 #ifdef CONFIG_SMP
 	/* Wait for the secondaries to halt. */
-	cpu_clear(boot_cpuid, cpu_present_map);
-	cpu_clear(boot_cpuid, cpu_possible_map);
+	set_cpu_present(boot_cpuid, false);
+	set_cpu_possible(boot_cpuid, false);
 	while (cpus_weight(cpu_present_map))
 		barrier();
 #endif

arch/alpha/kernel/smp.c

@@ -120,12 +120,12 @@ void __cpuinit
 smp_callin(void)
 {
 	int cpuid = hard_smp_processor_id();
-	cpumask_t mask = cpu_online_map;
 
-	if (cpu_test_and_set(cpuid, mask)) {
+	if (cpu_online(cpuid)) {
 		printk("??, cpu 0x%x already present??\n", cpuid);
 		BUG();
 	}
+	set_cpu_online(cpuid, true);
 
 	/* Turn on machine checks.  */
 	wrmces(7);
@@ -436,8 +436,8 @@ setup_smp(void)
 				((char *)cpubase + i*hwrpb->processor_size);
 			if ((cpu->flags & 0x1cc) == 0x1cc) {
 				smp_num_probed++;
-				cpu_set(i, cpu_possible_map);
-				cpu_set(i, cpu_present_map);
+				set_cpu_possible(i, true);
+				set_cpu_present(i, true);
 				cpu->pal_revision = boot_cpu_palrev;
 			}
 
@@ -470,8 +470,8 @@ smp_prepare_cpus(unsigned int max_cpus)
 
 	/* Nothing to do on a UP box, or when told not to.  */
 	if (smp_num_probed == 1 || max_cpus == 0) {
-		cpu_possible_map = cpumask_of_cpu(boot_cpuid);
-		cpu_present_map = cpumask_of_cpu(boot_cpuid);
+		init_cpu_possible(cpumask_of(boot_cpuid));
+		init_cpu_present(cpumask_of(boot_cpuid));
 		printk(KERN_INFO "SMP mode deactivated.\n");
 		return;
 	}

arch/arm/configs/at91sam9260ek_defconfig

@@ -608,7 +608,7 @@ CONFIG_WATCHDOG_NOWAYOUT=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
-CONFIG_AT91SAM9_WATCHDOG=y
+CONFIG_AT91SAM9X_WATCHDOG=y
 
 #
 # USB-based Watchdog Cards

arch/arm/configs/at91sam9261ek_defconfig

@@ -700,7 +700,7 @@ CONFIG_WATCHDOG_NOWAYOUT=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
-CONFIG_AT91SAM9_WATCHDOG=y
+CONFIG_AT91SAM9X_WATCHDOG=y
 
 #
 # USB-based Watchdog Cards

arch/arm/configs/at91sam9263ek_defconfig

@@ -710,7 +710,7 @@ CONFIG_WATCHDOG_NOWAYOUT=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
-CONFIG_AT91SAM9_WATCHDOG=y
+CONFIG_AT91SAM9X_WATCHDOG=y
 
 #
 # USB-based Watchdog Cards

arch/arm/configs/at91sam9rlek_defconfig

@@ -606,7 +606,7 @@ CONFIG_WATCHDOG_NOWAYOUT=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
-CONFIG_AT91SAM9_WATCHDOG=y
+CONFIG_AT91SAM9X_WATCHDOG=y
 
 #
 # Sonics Silicon Backplane

arch/arm/configs/qil-a9260_defconfig

@@ -727,7 +727,7 @@ CONFIG_WATCHDOG_NOWAYOUT=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_AT91SAM9_WATCHDOG is not set
+# CONFIG_AT91SAM9X_WATCHDOG is not set
 
 #
 # USB-based Watchdog Cards

arch/arm/kernel/elf.c

@@ -74,9 +74,9 @@ EXPORT_SYMBOL(elf_set_personality);
  */
 int arm_elf_read_implies_exec(const struct elf32_hdr *x, int executable_stack)
 {
-	if (executable_stack != EXSTACK_ENABLE_X)
+	if (executable_stack != EXSTACK_DISABLE_X)
 		return 1;
-	if (cpu_architecture() <= CPU_ARCH_ARMv6)
+	if (cpu_architecture() < CPU_ARCH_ARMv6)
 		return 1;
 	return 0;
 }

arch/arm/mach-at91/at91cap9_devices.c

@@ -697,7 +697,7 @@ static void __init at91_add_device_rtt(void)
  *  Watchdog
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE)
+#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
 static struct platform_device at91cap9_wdt_device = {
 	.name		= "at91_wdt",
 	.id		= -1,

arch/arm/mach-at91/at91sam9260_devices.c

@@ -643,7 +643,7 @@ static void __init at91_add_device_rtt(void)
  *  Watchdog
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE)
+#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
 static struct platform_device at91sam9260_wdt_device = {
 	.name		= "at91_wdt",
 	.id		= -1,

arch/arm/mach-at91/at91sam9261_devices.c

@@ -621,7 +621,7 @@ static void __init at91_add_device_rtt(void)
  *  Watchdog
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE)
+#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
 static struct platform_device at91sam9261_wdt_device = {
 	.name		= "at91_wdt",
 	.id		= -1,

arch/arm/mach-at91/at91sam9263_devices.c

@@ -854,7 +854,7 @@ static void __init at91_add_device_rtt(void)
  *  Watchdog
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE)
+#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
 static struct platform_device at91sam9263_wdt_device = {
 	.name		= "at91_wdt",
 	.id		= -1,

arch/arm/mach-at91/at91sam9rl_devices.c

@@ -609,7 +609,7 @@ static void __init at91_add_device_rtt(void)
  *  Watchdog
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE)
+#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
 static struct platform_device at91sam9rl_wdt_device = {
 	.name		= "at91_wdt",
 	.id		= -1,

arch/arm/mach-at91/gpio.c

@@ -490,7 +490,8 @@ postcore_initcall(at91_gpio_debugfs_init);
 
 /*--------------------------------------------------------------------------*/
 
-/* This lock class tells lockdep that GPIO irqs are in a different
+/*
+ * This lock class tells lockdep that GPIO irqs are in a different
  * category than their parents, so it won't report false recursion.
  */
 static struct lock_class_key gpio_lock_class;
@@ -509,9 +510,6 @@ void __init at91_gpio_irq_setup(void)
 		unsigned	id = this->id;
 		unsigned	i;
 
-		/* enable PIO controller's clock */
-		clk_enable(this->clock);
-
 		__raw_writel(~0, this->regbase + PIO_IDR);
 
 		for (i = 0, pin = this->chipbase; i < 32; i++, pin++) {
@@ -556,7 +554,14 @@ void __init at91_gpio_init(struct at91_gpio_bank *data, int nr_banks)
 		data->chipbase = PIN_BASE + i * 32;
 		data->regbase = data->offset + (void __iomem *)AT91_VA_BASE_SYS;
 
-		/* AT91SAM9263_ID_PIOCDE groups PIOC, PIOD, PIOE */
+		/* enable PIO controller's clock */
+		clk_enable(data->clock);
+
+		/*
+		 * Some processors share peripheral ID between multiple GPIO banks.
+		 *  SAM9263 (PIOC, PIOD, PIOE)
+		 *  CAP9 (PIOA, PIOB, PIOC, PIOD)
+		 */
 		if (last && last->id == data->id)
 			last->next = data;
 	}

arch/arm/mach-at91/include/mach/board.h

@@ -93,6 +93,7 @@ struct atmel_nand_data {
 	u8		enable_pin;	/* chip enable */
 	u8		det_pin;	/* card detect */
 	u8		rdy_pin;	/* ready/busy */
+	u8              rdy_pin_active_low;     /* rdy_pin value is inverted */
 	u8		ale;		/* address line number connected to ALE */
 	u8		cle;		/* address line number connected to CLE */
 	u8		bus_width_16;	/* buswidth is 16 bit */

arch/arm/mach-ep93xx/include/mach/gesbc9312.h

@@ -1,3 +0,0 @@
-/*
- * arch/arm/mach-ep93xx/include/mach/gesbc9312.h
- */

arch/arm/mach-ep93xx/include/mach/hardware.h

@@ -10,7 +10,6 @@
 
 #include "platform.h"
 
-#include "gesbc9312.h"
 #include "ts72xx.h"
 
 #endif

arch/arm/mach-kirkwood/irq.c

@@ -42,7 +42,7 @@ void __init kirkwood_init_irq(void)
 	writel(0, GPIO_EDGE_CAUSE(32));
 
 	for (i = IRQ_KIRKWOOD_GPIO_START; i < NR_IRQS; i++) {
-		set_irq_chip(i, &orion_gpio_irq_level_chip);
+		set_irq_chip(i, &orion_gpio_irq_chip);
 		set_irq_handler(i, handle_level_irq);
 		irq_desc[i].status |= IRQ_LEVEL;
 		set_irq_flags(i, IRQF_VALID);

arch/arm/mach-mv78xx0/irq.c

@@ -40,7 +40,7 @@ void __init mv78xx0_init_irq(void)
 	writel(0, GPIO_EDGE_CAUSE(0));
 
 	for (i = IRQ_MV78XX0_GPIO_START; i < NR_IRQS; i++) {
-		set_irq_chip(i, &orion_gpio_irq_level_chip);
+		set_irq_chip(i, &orion_gpio_irq_chip);
 		set_irq_handler(i, handle_level_irq);
 		irq_desc[i].status |= IRQ_LEVEL;
 		set_irq_flags(i, IRQF_VALID);

arch/arm/mach-omap2/clock.c

@@ -565,7 +565,7 @@ u32 omap2_clksel_to_divisor(struct clk *clk, u32 field_val)
  *
  * Given a struct clk of a rate-selectable clksel clock, and a clock divisor,
  * find the corresponding register field value.  The return register value is
- * the value before left-shifting.  Returns 0xffffffff on error
+ * the value before left-shifting.  Returns ~0 on error
  */
 u32 omap2_divisor_to_clksel(struct clk *clk, u32 div)
 {
@@ -577,7 +577,7 @@ u32 omap2_divisor_to_clksel(struct clk *clk, u32 div)
 
 	clks = omap2_get_clksel_by_parent(clk, clk->parent);
 	if (clks == NULL)
-		return 0;
+		return ~0;
 
 	for (clkr = clks->rates; clkr->div; clkr++) {
 		if ((clkr->flags & cpu_mask) && (clkr->div == div))
@@ -588,7 +588,7 @@ u32 omap2_divisor_to_clksel(struct clk *clk, u32 div)
 		printk(KERN_ERR "clock: Could not find divisor %d for "
 		       "clock %s parent %s\n", div, clk->name,
 		       clk->parent->name);
-		return 0;
+		return ~0;
 	}
 
 	return clkr->val;
@@ -708,7 +708,7 @@ static u32 omap2_clksel_get_src_field(void __iomem **src_addr,
 		return 0;
 
 	for (clkr = clks->rates; clkr->div; clkr++) {
-		if (clkr->flags & (cpu_mask | DEFAULT_RATE))
+		if (clkr->flags & cpu_mask && clkr->flags & DEFAULT_RATE)
 			break; /* Found the default rate for this platform */
 	}
 
@@ -746,7 +746,7 @@ int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent)
 		return -EINVAL;
 
 	if (clk->usecount > 0)
-		_omap2_clk_disable(clk);
+		omap2_clk_disable(clk);
 
 	/* Set new source value (previous dividers if any in effect) */
 	reg_val = __raw_readl(src_addr) & ~field_mask;
@@ -759,11 +759,11 @@ int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent)
 		wmb();
 	}
 
-	if (clk->usecount > 0)
-		_omap2_clk_enable(clk);
-
 	clk->parent = new_parent;
 
+	if (clk->usecount > 0)
+		omap2_clk_enable(clk);
+
 	/* CLKSEL clocks follow their parents' rates, divided by a divisor */
 	clk->rate = new_parent->rate;
 

arch/arm/mach-orion5x/irq.c

@@ -44,7 +44,7 @@ void __init orion5x_init_irq(void)
 	 * User can use set_type() if he wants to use edge types handlers.
 	 */
 	for (i = IRQ_ORION5X_GPIO_START; i < NR_IRQS; i++) {
-		set_irq_chip(i, &orion_gpio_irq_level_chip);
+		set_irq_chip(i, &orion_gpio_irq_chip);
 		set_irq_handler(i, handle_level_irq);
 		irq_desc[i].status |= IRQ_LEVEL;
 		set_irq_flags(i, IRQF_VALID);

arch/arm/mm/mmu.c

@@ -693,7 +693,8 @@ static void __init sanity_check_meminfo(void)
 		 * Check whether this memory bank would entirely overlap
 		 * the vmalloc area.
 		 */
-		if (__va(bank->start) >= VMALLOC_MIN) {
+		if (__va(bank->start) >= VMALLOC_MIN ||
+		    __va(bank->start) < PAGE_OFFSET) {
 			printk(KERN_NOTICE "Ignoring RAM at %.8lx-%.8lx "
 			       "(vmalloc region overlap).\n",
 			       bank->start, bank->start + bank->size - 1);

arch/arm/plat-orion/gpio.c

@@ -265,51 +265,36 @@ EXPORT_SYMBOL(orion_gpio_set_blink);
  *        polarity    LEVEL          mask
  *
  ****************************************************************************/
-static void gpio_irq_edge_ack(u32 irq)
-{
-	int pin = irq_to_gpio(irq);
-
-	writel(~(1 << (pin & 31)), GPIO_EDGE_CAUSE(pin));
-}
-
-static void gpio_irq_edge_mask(u32 irq)
-{
-	int pin = irq_to_gpio(irq);
-	u32 u;
-
-	u = readl(GPIO_EDGE_MASK(pin));
-	u &= ~(1 << (pin & 31));
-	writel(u, GPIO_EDGE_MASK(pin));
-}
 
-static void gpio_irq_edge_unmask(u32 irq)
+static void gpio_irq_ack(u32 irq)
 {
-	int pin = irq_to_gpio(irq);
-	u32 u;
-
-	u = readl(GPIO_EDGE_MASK(pin));
-	u |= 1 << (pin & 31);
-	writel(u, GPIO_EDGE_MASK(pin));
+	int type = irq_desc[irq].status & IRQ_TYPE_SENSE_MASK;
+	if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) {
+		int pin = irq_to_gpio(irq);
+		writel(~(1 << (pin & 31)), GPIO_EDGE_CAUSE(pin));
+	}
 }
 
-static void gpio_irq_level_mask(u32 irq)
+static void gpio_irq_mask(u32 irq)
 {
 	int pin = irq_to_gpio(irq);
-	u32 u;
-
-	u = readl(GPIO_LEVEL_MASK(pin));
+	int type = irq_desc[irq].status & IRQ_TYPE_SENSE_MASK;
+	u32 reg = (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) ?
+		GPIO_EDGE_MASK(pin) : GPIO_LEVEL_MASK(pin);
+	u32 u = readl(reg);
 	u &= ~(1 << (pin & 31));
-	writel(u, GPIO_LEVEL_MASK(pin));
+	writel(u, reg);
 }
 
-static void gpio_irq_level_unmask(u32 irq)
+static void gpio_irq_unmask(u32 irq)
 {
 	int pin = irq_to_gpio(irq);
-	u32 u;
-
-	u = readl(GPIO_LEVEL_MASK(pin));
+	int type = irq_desc[irq].status & IRQ_TYPE_SENSE_MASK;
+	u32 reg = (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) ?
+		GPIO_EDGE_MASK(pin) : GPIO_LEVEL_MASK(pin);
+	u32 u = readl(reg);
 	u |= 1 << (pin & 31);
-	writel(u, GPIO_LEVEL_MASK(pin));
+	writel(u, reg);
 }
 
 static int gpio_irq_set_type(u32 irq, u32 type)
@@ -331,9 +316,9 @@ static int gpio_irq_set_type(u32 irq, u32 type)
 	 * Set edge/level type.
 	 */
 	if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) {
-		desc->chip = &orion_gpio_irq_edge_chip;
+		desc->handle_irq = handle_edge_irq;
 	} else if (type & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) {
-		desc->chip = &orion_gpio_irq_level_chip;
+		desc->handle_irq = handle_level_irq;
 	} else {
 		printk(KERN_ERR "failed to set irq=%d (type=%d)\n", irq, type);
 		return -EINVAL;
@@ -371,19 +356,11 @@ static int gpio_irq_set_type(u32 irq, u32 type)
 	return 0;
 }
 
-struct irq_chip orion_gpio_irq_edge_chip = {
-	.name		= "orion_gpio_irq_edge",
-	.ack		= gpio_irq_edge_ack,
-	.mask		= gpio_irq_edge_mask,
-	.unmask		= gpio_irq_edge_unmask,
-	.set_type	= gpio_irq_set_type,
-};
-
-struct irq_chip orion_gpio_irq_level_chip = {
-	.name		= "orion_gpio_irq_level",
-	.mask		= gpio_irq_level_mask,
-	.mask_ack	= gpio_irq_level_mask,
-	.unmask		= gpio_irq_level_unmask,
+struct irq_chip orion_gpio_irq_chip = {
+	.name		= "orion_gpio",
+	.ack		= gpio_irq_ack,
+	.mask		= gpio_irq_mask,
+	.unmask		= gpio_irq_unmask,
 	.set_type	= gpio_irq_set_type,
 };
 

arch/arm/plat-orion/include/plat/gpio.h

@@ -31,8 +31,7 @@ void orion_gpio_set_blink(unsigned pin, int blink);
 /*
  * GPIO interrupt handling.
  */
-extern struct irq_chip orion_gpio_irq_edge_chip;
-extern struct irq_chip orion_gpio_irq_level_chip;
+extern struct irq_chip orion_gpio_irq_chip;
 void orion_gpio_irq_handler(int irqoff);
 
 

arch/avr32/mach-at32ap/include/mach/board.h

@@ -116,6 +116,7 @@ struct atmel_nand_data {
 	int	enable_pin;	/* chip enable */
 	int	det_pin;	/* card detect */
 	int	rdy_pin;	/* ready/busy */
+	u8	rdy_pin_active_low;	/* rdy_pin value is inverted */
 	u8	ale;		/* address line number connected to ALE */
 	u8	cle;		/* address line number connected to CLE */
 	u8	bus_width_16;	/* buswidth is 16 bit */

arch/ia64/Kconfig

@@ -221,7 +221,11 @@ config IA64_HP_SIM
 
 config IA64_XEN_GUEST
 	bool "Xen guest"
+	select SWIOTLB
 	depends on XEN
+	help
+	  Build a kernel that runs on Xen guest domain. At this moment only
+	  16KB page size in supported.
 
 endchoice
 
@@ -479,8 +483,7 @@ config HOLES_IN_ZONE
 	default y if VIRTUAL_MEM_MAP
 
 config HAVE_ARCH_EARLY_PFN_TO_NID
-	def_bool y
-	depends on NEED_MULTIPLE_NODES
+	def_bool NUMA && SPARSEMEM
 
 config HAVE_ARCH_NODEDATA_EXTENSION
 	def_bool y

arch/ia64/configs/xen_domu_defconfig

@@ -0,0 +1,1601 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.29-rc1
+# Fri Jan 16 11:49:59 2009
+#
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=20
+CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
+# CONFIG_GROUP_SCHED is not set
+
+#
+# Control Group support
+#
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_STRIP_GENERATED=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_STOP_MACHINE=y
+CONFIG_BLOCK=y
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_FREEZER=y
+
+#
+# Processor type and features
+#
+CONFIG_IA64=y
+CONFIG_64BIT=y
+CONFIG_ZONE_DMA=y
+CONFIG_QUICKLIST=y
+CONFIG_MMU=y
+CONFIG_SWIOTLB=y
+CONFIG_IOMMU_HELPER=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_HAVE_SETUP_PER_CPU_AREA=y
+CONFIG_DMI=y
+CONFIG_EFI=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+CONFIG_AUDIT_ARCH=y
+CONFIG_PARAVIRT_GUEST=y
+CONFIG_PARAVIRT=y
+CONFIG_XEN=y
+CONFIG_XEN_XENCOMM=y
+CONFIG_NO_IDLE_HZ=y
+# CONFIG_IA64_GENERIC is not set
+# CONFIG_IA64_DIG is not set
+# CONFIG_IA64_DIG_VTD is not set
+# CONFIG_IA64_HP_ZX1 is not set
+# CONFIG_IA64_HP_ZX1_SWIOTLB is not set
+# CONFIG_IA64_SGI_SN2 is not set
+# CONFIG_IA64_SGI_UV is not set
+# CONFIG_IA64_HP_SIM is not set
+CONFIG_IA64_XEN_GUEST=y
+# CONFIG_ITANIUM is not set
+CONFIG_MCKINLEY=y
+# CONFIG_IA64_PAGE_SIZE_4KB is not set
+# CONFIG_IA64_PAGE_SIZE_8KB is not set
+CONFIG_IA64_PAGE_SIZE_16KB=y
+# CONFIG_IA64_PAGE_SIZE_64KB is not set
+CONFIG_PGTABLE_3=y
+# CONFIG_PGTABLE_4 is not set
+CONFIG_HZ=250
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_IA64_L1_CACHE_SHIFT=7
+CONFIG_IA64_CYCLONE=y
+CONFIG_IOSAPIC=y
+CONFIG_FORCE_MAX_ZONEORDER=17
+# CONFIG_VIRT_CPU_ACCOUNTING is not set
+CONFIG_SMP=y
+CONFIG_NR_CPUS=16
+CONFIG_HOTPLUG_CPU=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_SCHED_SMT is not set
+CONFIG_PERMIT_BSP_REMOVE=y
+CONFIG_FORCE_CPEI_RETARGET=y
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
+CONFIG_PHYS_ADDR_T_64BIT=y
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_NR_QUICK=1
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_VIRTUAL_MEM_MAP=y
+CONFIG_HOLES_IN_ZONE=y
+# CONFIG_IA32_SUPPORT is not set
+# CONFIG_COMPAT_FOR_U64_ALIGNMENT is not set
+CONFIG_IA64_MCA_RECOVERY=y
+CONFIG_PERFMON=y
+CONFIG_IA64_PALINFO=y
+# CONFIG_IA64_MC_ERR_INJECT is not set
+# CONFIG_IA64_ESI is not set
+# CONFIG_IA64_HP_AML_NFW is not set
+CONFIG_KEXEC=y
+# CONFIG_CRASH_DUMP is not set
+
+#
+# Firmware Drivers
+#
+# CONFIG_FIRMWARE_MEMMAP is not set
+CONFIG_EFI_VARS=y
+CONFIG_EFI_PCDP=y
+CONFIG_DMIID=y
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+CONFIG_BINFMT_MISC=m
+
+#
+# Power management and ACPI options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_ACPI=y
+CONFIG_ACPI_SLEEP=y
+CONFIG_ACPI_PROCFS=y
+CONFIG_ACPI_PROCFS_POWER=y
+CONFIG_ACPI_SYSFS_POWER=y
+CONFIG_ACPI_PROC_EVENT=y
+CONFIG_ACPI_BUTTON=m
+CONFIG_ACPI_FAN=m
+# CONFIG_ACPI_DOCK is not set
+CONFIG_ACPI_PROCESSOR=m
+CONFIG_ACPI_HOTPLUG_CPU=y
+CONFIG_ACPI_THERMAL=m
+# CONFIG_ACPI_CUSTOM_DSDT is not set
+CONFIG_ACPI_BLACKLIST_YEAR=0
+# CONFIG_ACPI_DEBUG is not set
+# CONFIG_ACPI_PCI_SLOT is not set
+CONFIG_ACPI_SYSTEM=y
+CONFIG_ACPI_CONTAINER=m
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Bus options (PCI, PCMCIA)
+#
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_PCIEPORTBUS is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
+CONFIG_HOTPLUG_PCI=m
+# CONFIG_HOTPLUG_PCI_FAKE is not set
+CONFIG_HOTPLUG_PCI_ACPI=m
+# CONFIG_HOTPLUG_PCI_ACPI_IBM is not set
+# CONFIG_HOTPLUG_PCI_CPCI is not set
+# CONFIG_HOTPLUG_PCI_SHPC is not set
+# CONFIG_PCCARD is not set
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NET_NS is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+CONFIG_ARPD=y
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_PNP=y
+CONFIG_PNP_DEBUG_MESSAGES=y
+
+#
+# Protocols
+#
+CONFIG_PNPACPI=y
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_XEN_BLKDEV_FRONTEND=y
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
+CONFIG_HAVE_IDE=y
+CONFIG_IDE=y
+
+#
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
+#
+CONFIG_IDE_TIMINGS=y
+CONFIG_IDE_ATAPI=y
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEACPI is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
+
+#
+# IDE chipset support/bugfixes
+#
+# CONFIG_IDE_GENERIC is not set
+# CONFIG_BLK_DEV_PLATFORM is not set
+# CONFIG_BLK_DEV_IDEPNP is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
+
+#
+# PCI IDE chipsets support
+#
+CONFIG_BLK_DEV_IDEPCI=y
+CONFIG_IDEPCI_PCIBUS_ORDER=y
+# CONFIG_BLK_DEV_OFFBOARD is not set
+CONFIG_BLK_DEV_GENERIC=y
+# CONFIG_BLK_DEV_OPTI621 is not set
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+CONFIG_BLK_DEV_CMD64X=y
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_JMICRON is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+CONFIG_BLK_DEV_PIIX=y
+# CONFIG_BLK_DEV_IT8172 is not set
+# CONFIG_BLK_DEV_IT8213 is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_BLK_DEV_TC86C001 is not set
+CONFIG_BLK_DEV_IDEDMA=y
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+CONFIG_SCSI_NETLINK=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=m
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+CONFIG_SCSI_SPI_ATTRS=y
+CONFIG_SCSI_FC_ATTRS=y
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
+# CONFIG_SCSI_STEX is not set
+CONFIG_SCSI_SYM53C8XX_2=y
+CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
+CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
+CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
+CONFIG_SCSI_SYM53C8XX_MMIO=y
+CONFIG_SCSI_QLOGIC_1280=y
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_ATA is not set
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+# CONFIG_MD_RAID10 is not set
+# CONFIG_MD_RAID456 is not set
+CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_FAULTY is not set
+CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+# CONFIG_DM_MULTIPATH is not set
+# CONFIG_DM_DELAY is not set
+# CONFIG_DM_UEVENT is not set
+CONFIG_FUSION=y
+CONFIG_FUSION_SPI=y
+CONFIG_FUSION_FC=y
+# CONFIG_FUSION_SAS is not set
+CONFIG_FUSION_MAX_SGE=128
+CONFIG_FUSION_CTL=y
+# CONFIG_FUSION_LOGGING is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=m
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_NET_SB1000 is not set
+# CONFIG_ARCNET is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=m
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+CONFIG_NET_TULIP=y
+# CONFIG_DE2104X is not set
+CONFIG_TULIP=m
+# CONFIG_TULIP_MWI is not set
+# CONFIG_TULIP_MMIO is not set
+# CONFIG_TULIP_NAPI is not set
+# CONFIG_DE4X5 is not set
+# CONFIG_WINBOND_840 is not set
+# CONFIG_DM9102 is not set
+# CONFIG_ULI526X is not set
+# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+CONFIG_E100=m
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139CP is not set
+# CONFIG_8139TOO is not set
+# CONFIG_R6040 is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+# CONFIG_VIA_RHINE is not set
+# CONFIG_SC92031 is not set
+# CONFIG_ATL2 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+CONFIG_E1000=y
+# CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_VIA_VELOCITY is not set
+CONFIG_TIGON3=y
+# CONFIG_BNX2 is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_JME is not set
+CONFIG_NETDEV_10000=y
+# CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_ENIC is not set
+# CONFIG_IXGBE is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_QLGE is not set
+# CONFIG_SFC is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+CONFIG_XEN_NETDEV_FRONTEND=y
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+CONFIG_NETCONSOLE=y
+# CONFIG_NETCONSOLE_DYNAMIC is not set
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+CONFIG_GAMEPORT=m
+# CONFIG_GAMEPORT_NS558 is not set
+# CONFIG_GAMEPORT_L4 is not set
+# CONFIG_GAMEPORT_EMU10K1 is not set
+# CONFIG_GAMEPORT_FM801 is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_COMPUTONE is not set
+# CONFIG_ROCKETPORT is not set
+# CONFIG_CYCLADES is not set
+# CONFIG_DIGIEPCA is not set
+# CONFIG_MOXA_INTELLIO is not set
+# CONFIG_MOXA_SMARTIO is not set
+# CONFIG_ISI is not set
+# CONFIG_SYNCLINKMP is not set
+# CONFIG_SYNCLINK_GT is not set
+# CONFIG_N_HDLC is not set
+# CONFIG_RISCOM8 is not set
+# CONFIG_SPECIALIX is not set
+# CONFIG_SX is not set
+# CONFIG_RIO is not set
+# CONFIG_STALDRV is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_PNP=y
+CONFIG_SERIAL_8250_NR_UARTS=6
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+# CONFIG_SERIAL_8250_RSA is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+CONFIG_HVC_DRIVER=y
+CONFIG_HVC_IRQ=y
+CONFIG_HVC_XEN=y
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+CONFIG_EFI_RTC=y
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+CONFIG_RAW_DRIVER=m
+CONFIG_MAX_RAW_DEVS=256
+CONFIG_HPET=y
+CONFIG_HPET_MMAP=y
+# CONFIG_HANGCHECK_TIMER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=m
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=m
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+# CONFIG_PDA_POWER is not set
+# CONFIG_BATTERY_DS2760 is not set
+# CONFIG_BATTERY_BQ27x00 is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_I5K_AMB is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3LV02D is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_THERMAL=m
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_REGULATOR is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+CONFIG_AGP=m
+CONFIG_DRM=m
+CONFIG_DRM_TDFX=m
+CONFIG_DRM_R128=m
+CONFIG_DRM_RADEON=m
+CONFIG_DRM_MGA=m
+CONFIG_DRM_SIS=m
+# CONFIG_DRM_VIA is not set
+# CONFIG_DRM_SAVAGE is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_VGA_CONSOLE=y
+# CONFIG_VGACON_SOFT_SCROLLBACK is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_EZKEY=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_LOGITECH=y
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+CONFIG_HID_NTRIG=y
+CONFIG_HID_PANTHERLORD=y
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+CONFIG_HID_TOPSEED=y
+# CONFIG_THRUSTMASTER_FF is not set
+# CONFIG_ZEROPLUS_FF is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=m
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=m
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+CONFIG_USB_UHCI_HCD=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+#
+
+#
+# see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_UWB is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
+CONFIG_XEN_BALLOON=y
+CONFIG_XEN_SCRUB_PAGES=y
+CONFIG_XENFS=y
+CONFIG_XEN_COMPAT_XENFS=y
+# CONFIG_STAGING is not set
+# CONFIG_MSPEC is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+CONFIG_REISERFS_FS=y
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS_POSIX_ACL=y
+CONFIG_REISERFS_FS_SECURITY=y
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
+CONFIG_XFS_FS=y
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_AUTOFS_FS=y
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+# CONFIG_ZISOFS is not set
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_NTFS_FS=m
+# CONFIG_NTFS_DEBUG is not set
+# CONFIG_NTFS_RW is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+CONFIG_HUGETLBFS=y
+CONFIG_HUGETLB_PAGE=y
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+CONFIG_NFSD_V4=y
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=m
+CONFIG_SUNRPC_GSS=m
+# CONFIG_SUNRPC_REGISTER_V4 is not set
+CONFIG_RPCSEC_GSS_KRB5=m
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+CONFIG_SMB_NLS_DEFAULT=y
+CONFIG_SMB_NLS_REMOTE="cp437"
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+CONFIG_SGI_PARTITION=y
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+CONFIG_EFI_PARTITION=y
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=2048
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+
+#
+# Tracers
+#
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_IA64_GRANULE_16MB=y
+# CONFIG_IA64_GRANULE_64MB is not set
+# CONFIG_IA64_PRINT_HAZARDS is not set
+# CONFIG_DISABLE_VHPT is not set
+# CONFIG_IA64_DEBUG_CMPXCHG is not set
+# CONFIG_IA64_DEBUG_IRQ is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_MANAGER=m
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=m
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+CONFIG_HAVE_KVM=y
+CONFIG_VIRTUALIZATION=y
+# CONFIG_KVM is not set
+# CONFIG_VIRTIO_PCI is not set
+# CONFIG_VIRTIO_BALLOON is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_PENDING_IRQ=y
+CONFIG_IRQ_PER_CPU=y
+# CONFIG_IOMMU_API is not set

arch/ia64/include/asm/kvm.h

@@ -24,6 +24,10 @@
 #include <linux/types.h>
 #include <linux/ioctl.h>
 
+/* Select x86 specific features in <linux/kvm.h> */
+#define __KVM_HAVE_IOAPIC
+#define __KVM_HAVE_DEVICE_ASSIGNMENT
+
 /* Architectural interrupt line count. */
 #define KVM_NR_INTERRUPTS 256
 

arch/ia64/include/asm/mmzone.h

@@ -31,10 +31,6 @@ static inline int pfn_to_nid(unsigned long pfn)
 #endif
 }
 
-#ifdef CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID
-extern int early_pfn_to_nid(unsigned long pfn);
-#endif
-
 #ifdef CONFIG_IA64_DIG /* DIG systems are small */
 # define MAX_PHYSNODE_ID	8
 # define NR_NODE_MEMBLKS	(MAX_NUMNODES * 8)

arch/ia64/include/asm/sn/bte.h

@@ -39,7 +39,7 @@
 /* BTE status register only supports 16 bits for length field */
 #define BTE_LEN_BITS (16)
 #define BTE_LEN_MASK ((1 << BTE_LEN_BITS) - 1)
-#define BTE_MAX_XFER ((1 << BTE_LEN_BITS) * L1_CACHE_BYTES)
+#define BTE_MAX_XFER (BTE_LEN_MASK << L1_CACHE_SHIFT)
 
 
 /* Define hardware */

arch/ia64/kernel/smpboot.c

@@ -736,14 +736,15 @@ int __cpu_disable(void)
 			return -EBUSY;
 	}
 
+	cpu_clear(cpu, cpu_online_map);
+
 	if (migrate_platform_irqs(cpu)) {
 		cpu_set(cpu, cpu_online_map);
-		return (-EBUSY);
+		return -EBUSY;
 	}
 
 	remove_siblinginfo(cpu);
 	fixup_irqs();
-	cpu_clear(cpu, cpu_online_map);
 	local_flush_tlb_all();
 	cpu_clear(cpu, cpu_callin_map);
 	return 0;

arch/ia64/kvm/kvm-ia64.c

@@ -1337,6 +1337,10 @@ static void kvm_release_vm_pages(struct kvm *kvm)
 	}
 }
 
+void kvm_arch_sync_events(struct kvm *kvm)
+{
+}
+
 void kvm_arch_destroy_vm(struct kvm *kvm)
 {
 	kvm_iommu_unmap_guest(kvm);

arch/ia64/kvm/process.c

@@ -455,13 +455,18 @@ fpswa_ret_t vmm_fp_emulate(int fp_fault, void *bundle, unsigned long *ipsr,
 	if (!vmm_fpswa_interface)
 		return (fpswa_ret_t) {-1, 0, 0, 0};
 
-	/*
-	 * Just let fpswa driver to use hardware fp registers.
-	 * No fp register is valid in memory.
-	 */
 	memset(&fp_state, 0, sizeof(fp_state_t));
 
 	/*
+	 * compute fp_state.  only FP registers f6 - f11 are used by the
+	 * vmm, so set those bits in the mask and set the low volatile
+	 * pointer to point to these registers.
+	 */
+	fp_state.bitmask_low64 = 0xfc0;  /* bit6..bit11 */
+
+	fp_state.fp_state_low_volatile = (fp_state_low_volatile_t *) &regs->f6;
+
+   /*
 	 * unsigned long (*EFI_FPSWA) (
 	 *      unsigned long    trap_type,
 	 *      void             *Bundle,
@@ -545,10 +550,6 @@ void reflect_interruption(u64 ifa, u64 isr, u64 iim,
 		status = vmm_handle_fpu_swa(0, regs, isr);
 		if (!status)
 			return ;
-		else if (-EAGAIN == status) {
-			vcpu_decrement_iip(vcpu);
-			return ;
-		}
 		break;
 	}
 

arch/ia64/mm/numa.c

@@ -58,7 +58,7 @@ paddr_to_nid(unsigned long paddr)
  * SPARSEMEM to allocate the SPARSEMEM sectionmap on the NUMA node where
  * the section resides.
  */
-int early_pfn_to_nid(unsigned long pfn)
+int __meminit __early_pfn_to_nid(unsigned long pfn)
 {
 	int i, section = pfn >> PFN_SECTION_SHIFT, ssec, esec;
 
@@ -70,7 +70,7 @@ int early_pfn_to_nid(unsigned long pfn)
 			return node_memblk[i].nid;
 	}
 
-	return 0;
+	return -1;
 }
 
 #ifdef CONFIG_MEMORY_HOTPLUG

arch/ia64/sn/kernel/bte.c

@@ -97,9 +97,10 @@ bte_result_t bte_copy(u64 src, u64 dest, u64 len, u64 mode, void *notification)
 		return BTE_SUCCESS;
 	}
 
-	BUG_ON((len & L1_CACHE_MASK) ||
-		 (src & L1_CACHE_MASK) || (dest & L1_CACHE_MASK));
-	BUG_ON(!(len < ((BTE_LEN_MASK + 1) << L1_CACHE_SHIFT)));
+	BUG_ON(len & L1_CACHE_MASK);
+	BUG_ON(src & L1_CACHE_MASK);
+	BUG_ON(dest & L1_CACHE_MASK);
+	BUG_ON(len > BTE_MAX_XFER);
 
 	/*
 	 * Start with interface corresponding to cpu number

arch/ia64/xen/Kconfig

@@ -8,8 +8,7 @@ config XEN
 	depends on PARAVIRT && MCKINLEY && IA64_PAGE_SIZE_16KB && EXPERIMENTAL
 	select XEN_XENCOMM
 	select NO_IDLE_HZ
-
-	# those are required to save/restore.
+	# followings are required to save/restore.
 	select ARCH_SUSPEND_POSSIBLE
 	select SUSPEND
 	select PM_SLEEP

arch/ia64/xen/xen_pv_ops.c

@@ -153,7 +153,7 @@ xen_post_smp_prepare_boot_cpu(void)
 	xen_setup_vcpu_info_placement();
 }
 
-static const struct pv_init_ops xen_init_ops __initdata = {
+static const struct pv_init_ops xen_init_ops __initconst = {
 	.banner = xen_banner,
 
 	.reserve_memory = xen_reserve_memory,
@@ -337,7 +337,7 @@ xen_iosapic_write(char __iomem *iosapic, unsigned int reg, u32 val)
 	HYPERVISOR_physdev_op(PHYSDEVOP_apic_write, &apic_op);
 }
 
-static const struct pv_iosapic_ops xen_iosapic_ops __initdata = {
+static const struct pv_iosapic_ops xen_iosapic_ops __initconst = {
 	.pcat_compat_init = xen_pcat_compat_init,
 	.__get_irq_chip = xen_iosapic_get_irq_chip,
 

arch/m68k/atari/ataints.c

@@ -187,8 +187,8 @@ __asm__ (__ALIGN_STR "\n"						   \
 "	jbra	ret_from_interrupt\n"					   \
 	 : : "i" (&kstat_cpu(0).irqs[n+8]), "i" (&irq_handler[n+8]),	   \
 	     "n" (PT_OFF_SR), "n" (n),					   \
-	     "i" (n & 8 ? (n & 16 ? &tt_mfp.int_mk_a : &mfp.int_mk_a)	   \
-		        : (n & 16 ? &tt_mfp.int_mk_b : &mfp.int_mk_b)),	   \
+	     "i" (n & 8 ? (n & 16 ? &tt_mfp.int_mk_a : &st_mfp.int_mk_a)   \
+		        : (n & 16 ? &tt_mfp.int_mk_b : &st_mfp.int_mk_b)), \
 	     "m" (preempt_count()), "di" (HARDIRQ_OFFSET)		   \
 );									   \
 	for (;;);			/* fake noreturn */		   \
@@ -366,14 +366,14 @@ void __init atari_init_IRQ(void)
 	/* Initialize the MFP(s) */
 
 #ifdef ATARI_USE_SOFTWARE_EOI
-	mfp.vec_adr  = 0x48;	/* Software EOI-Mode */
+	st_mfp.vec_adr  = 0x48;	/* Software EOI-Mode */
 #else
-	mfp.vec_adr  = 0x40;	/* Automatic EOI-Mode */
+	st_mfp.vec_adr  = 0x40;	/* Automatic EOI-Mode */
 #endif
-	mfp.int_en_a = 0x00;	/* turn off MFP-Ints */
-	mfp.int_en_b = 0x00;
-	mfp.int_mk_a = 0xff;	/* no Masking */
-	mfp.int_mk_b = 0xff;
+	st_mfp.int_en_a = 0x00;	/* turn off MFP-Ints */
+	st_mfp.int_en_b = 0x00;
+	st_mfp.int_mk_a = 0xff;	/* no Masking */
+	st_mfp.int_mk_b = 0xff;
 
 	if (ATARIHW_PRESENT(TT_MFP)) {
 #ifdef ATARI_USE_SOFTWARE_EOI

arch/m68k/atari/atakeyb.c

@@ -609,10 +609,10 @@ int atari_keyb_init(void)
 				 ACIA_RHTID : 0);
 
 	/* make sure the interrupt line is up */
-	} while ((mfp.par_dt_reg & 0x10) == 0);
+	} while ((st_mfp.par_dt_reg & 0x10) == 0);
 
 	/* enable ACIA Interrupts */
-	mfp.active_edge &= ~0x10;
+	st_mfp.active_edge &= ~0x10;
 	atari_turnon_irq(IRQ_MFP_ACIA);
 
 	ikbd_self_test = 1;

arch/m68k/atari/config.c

@@ -258,7 +258,7 @@ void __init config_atari(void)
 			printk("STND_SHIFTER ");
 		}
 	}
-	if (hwreg_present(&mfp.par_dt_reg)) {
+	if (hwreg_present(&st_mfp.par_dt_reg)) {
 		ATARIHW_SET(ST_MFP);
 		printk("ST_MFP ");
 	}

arch/m68k/atari/debug.c

@@ -34,9 +34,9 @@ static struct console atari_console_driver = {
 
 static inline void ata_mfp_out(char c)
 {
-	while (!(mfp.trn_stat & 0x80))	/* wait for tx buf empty */
+	while (!(st_mfp.trn_stat & 0x80))	/* wait for tx buf empty */
 		barrier();
-	mfp.usart_dta = c;
+	st_mfp.usart_dta = c;
 }
 
 static void atari_mfp_console_write(struct console *co, const char *str,
@@ -91,7 +91,7 @@ static int ata_par_out(char c)
 	/* This a some-seconds timeout in case no printer is connected */
 	unsigned long i = loops_per_jiffy > 1 ? loops_per_jiffy : 10000000/HZ;
 
-	while ((mfp.par_dt_reg & 1) && --i) /* wait for BUSY == L */
+	while ((st_mfp.par_dt_reg & 1) && --i) /* wait for BUSY == L */
 		;
 	if (!i)
 		return 0;
@@ -131,9 +131,9 @@ static void atari_par_console_write(struct console *co, const char *str,
 #if 0
 int atari_mfp_console_wait_key(struct console *co)
 {
-	while (!(mfp.rcv_stat & 0x80))	/* wait for rx buf filled */
+	while (!(st_mfp.rcv_stat & 0x80))	/* wait for rx buf filled */
 		barrier();
-	return mfp.usart_dta;
+	return st_mfp.usart_dta;
 }
 
 int atari_scc_console_wait_key(struct console *co)
@@ -175,12 +175,12 @@ static void __init atari_init_mfp_port(int cflag)
 		baud = B9600;		/* use default 9600bps for non-implemented rates */
 	baud -= B1200;			/* baud_table[] starts at 1200bps */
 
-	mfp.trn_stat &= ~0x01;		/* disable TX */
-	mfp.usart_ctr = parity | csize | 0x88; /* 1:16 clk mode, 1 stop bit */
-	mfp.tim_ct_cd &= 0x70;		/* stop timer D */
-	mfp.tim_dt_d = baud_table[baud];
-	mfp.tim_ct_cd |= 0x01;		/* start timer D, 1:4 */
-	mfp.trn_stat |= 0x01;		/* enable TX */
+	st_mfp.trn_stat &= ~0x01;	/* disable TX */
+	st_mfp.usart_ctr = parity | csize | 0x88; /* 1:16 clk mode, 1 stop bit */
+	st_mfp.tim_ct_cd &= 0x70;	/* stop timer D */
+	st_mfp.tim_dt_d = baud_table[baud];
+	st_mfp.tim_ct_cd |= 0x01;	/* start timer D, 1:4 */
+	st_mfp.trn_stat |= 0x01;	/* enable TX */
 }
 
 #define SCC_WRITE(reg, val)				\

arch/m68k/atari/time.c

@@ -27,9 +27,9 @@ void __init
 atari_sched_init(irq_handler_t timer_routine)
 {
     /* set Timer C data Register */
-    mfp.tim_dt_c = INT_TICKS;
+    st_mfp.tim_dt_c = INT_TICKS;
     /* start timer C, div = 1:100 */
-    mfp.tim_ct_cd = (mfp.tim_ct_cd & 15) | 0x60;
+    st_mfp.tim_ct_cd = (st_mfp.tim_ct_cd & 15) | 0x60;
     /* install interrupt service routine for MFP Timer C */
     if (request_irq(IRQ_MFP_TIMC, timer_routine, IRQ_TYPE_SLOW,
 		    "timer", timer_routine))
@@ -46,11 +46,11 @@ unsigned long atari_gettimeoffset (void)
   unsigned long ticks, offset = 0;
 
   /* read MFP timer C current value */
-  ticks = mfp.tim_dt_c;
+  ticks = st_mfp.tim_dt_c;
   /* The probability of underflow is less than 2% */
   if (ticks > INT_TICKS - INT_TICKS / 50)
     /* Check for pending timer interrupt */
-    if (mfp.int_pn_b & (1 << 5))
+    if (st_mfp.int_pn_b & (1 << 5))
       offset = TICK_SIZE;
 
   ticks = INT_TICKS - ticks;

arch/m68k/include/asm/atarihw.h

@@ -113,7 +113,7 @@ extern struct atari_hw_present atari_hw_present;
  * of nops on various machines. Somebody claimed that the tstb takes 600 ns.
  */
 #define	MFPDELAY() \
-	__asm__ __volatile__ ( "tstb %0" : : "m" (mfp.par_dt_reg) : "cc" );
+	__asm__ __volatile__ ( "tstb %0" : : "m" (st_mfp.par_dt_reg) : "cc" );
 
 /* Do cache push/invalidate for DMA read/write. This function obeys the
  * snooping on some machines (Medusa) and processors: The Medusa itself can
@@ -565,7 +565,7 @@ struct MFP
   u_char char_dummy23;
   u_char usart_dta;
  };
-# define mfp ((*(volatile struct MFP*)MFP_BAS))
+# define st_mfp ((*(volatile struct MFP*)MFP_BAS))
 
 /* TT's second MFP */
 

arch/m68k/include/asm/atariints.h

@@ -113,7 +113,7 @@ static inline int get_mfp_bit( unsigned irq, int type )
 {	unsigned char	mask, *reg;
 
 	mask = 1 << (irq & 7);
-	reg = (unsigned char *)&mfp.int_en_a + type*4 +
+	reg = (unsigned char *)&st_mfp.int_en_a + type*4 +
 		  ((irq & 8) >> 2) + (((irq-8) & 16) << 3);
 	return( *reg & mask );
 }
@@ -123,7 +123,7 @@ static inline void set_mfp_bit( unsigned irq, int type )
 {	unsigned char	mask, *reg;
 
 	mask = 1 << (irq & 7);
-	reg = (unsigned char *)&mfp.int_en_a + type*4 +
+	reg = (unsigned char *)&st_mfp.int_en_a + type*4 +
 		  ((irq & 8) >> 2) + (((irq-8) & 16) << 3);
 	__asm__ __volatile__ ( "orb %0,%1"
 			      : : "di" (mask), "m" (*reg) : "memory" );
@@ -134,7 +134,7 @@ static inline void clear_mfp_bit( unsigned irq, int type )
 {	unsigned char	mask, *reg;
 
 	mask = ~(1 << (irq & 7));
-	reg = (unsigned char *)&mfp.int_en_a + type*4 +
+	reg = (unsigned char *)&st_mfp.int_en_a + type*4 +
 		  ((irq & 8) >> 2) + (((irq-8) & 16) << 3);
 	if (type == MFP_PENDING || type == MFP_SERVICE)
 		__asm__ __volatile__ ( "moveb %0,%1"

arch/mn10300/Kconfig

@@ -7,6 +7,7 @@ mainmenu "Linux Kernel Configuration"
 
 config MN10300
 	def_bool y
+	select HAVE_OPROFILE
 
 config AM33
 	def_bool y

arch/mn10300/unit-asb2305/pci.c

@@ -173,7 +173,7 @@ static int pci_ampci_write_config_byte(struct pci_bus *bus, unsigned int devfn,
 		BRIDGEREGB(where) = value;
 	} else {
 		if (bus->number == 0 &&
-		    (devfn == PCI_DEVFN(2, 0) && devfn == PCI_DEVFN(3, 0))
+		    (devfn == PCI_DEVFN(2, 0) || devfn == PCI_DEVFN(3, 0))
 		    )
 			__pcidebug("<= %02x", bus, devfn, where, value);
 		CONFIG_ADDRESS = CONFIG_CMD(bus, devfn, where);

arch/powerpc/include/asm/pgtable-4k.h

@@ -60,7 +60,7 @@
 /* It should be preserving the high 48 bits and then specifically */
 /* preserving _PAGE_SECONDARY | _PAGE_GROUP_IX */
 #define _PAGE_CHG_MASK	(PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY | \
-                         _PAGE_HPTEFLAGS)
+                         _PAGE_HPTEFLAGS | _PAGE_SPECIAL)
 
 /* Bits to mask out from a PMD to get to the PTE page */
 #define PMD_MASKED_BITS		0

arch/powerpc/include/asm/pgtable-64k.h

@@ -114,7 +114,7 @@ static inline struct subpage_prot_table *pgd_subpage_prot(pgd_t *pgd)
  * pgprot changes
  */
 #define _PAGE_CHG_MASK	(PTE_RPN_MASK | _PAGE_HPTEFLAGS | _PAGE_DIRTY | \
-                         _PAGE_ACCESSED)
+                         _PAGE_ACCESSED | _PAGE_SPECIAL)
 
 /* Bits to mask out from a PMD to get to the PTE page */
 #define PMD_MASKED_BITS		0x1ff

arch/powerpc/include/asm/pgtable-ppc32.h

@@ -429,7 +429,8 @@ extern int icache_44x_need_flush;
 #define PMD_PAGE_SIZE(pmd)	bad_call_to_PMD_PAGE_SIZE()
 #endif
 
-#define _PAGE_CHG_MASK	(PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY)
+#define _PAGE_CHG_MASK	(PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY | \
+			 _PAGE_SPECIAL)
 
 
 #define PAGE_PROT_BITS	(_PAGE_GUARDED | _PAGE_COHERENT | _PAGE_NO_CACHE | \

arch/powerpc/kernel/align.c

@@ -646,11 +646,16 @@ static int emulate_vsx(unsigned char __user *addr, unsigned int reg,
 		       unsigned int areg, struct pt_regs *regs,
 		       unsigned int flags, unsigned int length)
 {
-	char *ptr = (char *) &current->thread.TS_FPR(reg);
+	char *ptr;
 	int ret = 0;
 
 	flush_vsx_to_thread(current);
 
+	if (reg < 32)
+		ptr = (char *) &current->thread.TS_FPR(reg);
+	else
+		ptr = (char *) &current->thread.vr[reg - 32];
+
 	if (flags & ST)
 		ret = __copy_to_user(addr, ptr, length);
         else {

arch/powerpc/kvm/powerpc.c

@@ -125,6 +125,10 @@ static void kvmppc_free_vcpus(struct kvm *kvm)
 	}
 }
 
+void kvm_arch_sync_events(struct kvm *kvm)
+{
+}
+
 void kvm_arch_destroy_vm(struct kvm *kvm)
 {
 	kvmppc_free_vcpus(kvm);

arch/powerpc/mm/numa.c

@@ -19,6 +19,7 @@
 #include <linux/notifier.h>
 #include <linux/lmb.h>
 #include <linux/of.h>
+#include <linux/pfn.h>
 #include <asm/sparsemem.h>
 #include <asm/prom.h>
 #include <asm/system.h>
@@ -882,7 +883,7 @@ static void mark_reserved_regions_for_nid(int nid)
 		unsigned long physbase = lmb.reserved.region[i].base;
 		unsigned long size = lmb.reserved.region[i].size;
 		unsigned long start_pfn = physbase >> PAGE_SHIFT;
-		unsigned long end_pfn = ((physbase + size) >> PAGE_SHIFT);
+		unsigned long end_pfn = PFN_UP(physbase + size);
 		struct node_active_region node_ar;
 		unsigned long node_end_pfn = node->node_start_pfn +
 					     node->node_spanned_pages;
@@ -908,7 +909,7 @@ static void mark_reserved_regions_for_nid(int nid)
 			 */
 			if (end_pfn > node_ar.end_pfn)
 				reserve_size = (node_ar.end_pfn << PAGE_SHIFT)
-					- (start_pfn << PAGE_SHIFT);
+					- physbase;
 			/*
 			 * Only worry about *this* node, others may not
 			 * yet have valid NODE_DATA().

arch/powerpc/platforms/ps3/mm.c

@@ -328,7 +328,7 @@ static int __init ps3_mm_add_memory(void)
 	return result;
 }
 
-core_initcall(ps3_mm_add_memory);
+device_initcall(ps3_mm_add_memory);
 
 /*============================================================================*/
 /* dma routines                                                               */

arch/s390/include/asm/cputime.h

@@ -145,7 +145,7 @@ cputime_to_timeval(const cputime_t cputime, struct timeval *value)
 	value->tv_usec = rp.subreg.even / 4096;
 	value->tv_sec = rp.subreg.odd;
 #else
-	value->tv_usec = cputime % 4096000000ULL;
+	value->tv_usec = (cputime % 4096000000ULL) / 4096;
 	value->tv_sec = cputime / 4096000000ULL;
 #endif
 }

arch/s390/include/asm/setup.h

@@ -43,6 +43,8 @@ struct mem_chunk {
 
 extern struct mem_chunk memory_chunk[];
 extern unsigned long real_memory_size;
+extern int memory_end_set;
+extern unsigned long memory_end;
 
 void detect_memory_layout(struct mem_chunk chunk[]);
 

arch/s390/kernel/setup.c

@@ -82,7 +82,9 @@ char elf_platform[ELF_PLATFORM_SIZE];
 
 struct mem_chunk __initdata memory_chunk[MEMORY_CHUNKS];
 volatile int __cpu_logical_map[NR_CPUS]; /* logical cpu to cpu address */
-static unsigned long __initdata memory_end;
+
+int __initdata memory_end_set;
+unsigned long __initdata memory_end;
 
 /*
  * This is set up by the setup-routine at boot-time
@@ -281,6 +283,7 @@ void (*pm_power_off)(void) = machine_power_off;
 static int __init early_parse_mem(char *p)
 {
 	memory_end = memparse(p, &p);
+	memory_end_set = 1;
 	return 0;
 }
 early_param("mem", early_parse_mem);
@@ -508,8 +511,10 @@ static void __init setup_memory_end(void)
 	int i;
 
 #if defined(CONFIG_ZFCPDUMP) || defined(CONFIG_ZFCPDUMP_MODULE)
-	if (ipl_info.type == IPL_TYPE_FCP_DUMP)
+	if (ipl_info.type == IPL_TYPE_FCP_DUMP) {
 		memory_end = ZFCPDUMP_HSA_SIZE;
+		memory_end_set = 1;
+	}
 #endif
 	memory_size = 0;
 	memory_end &= PAGE_MASK;

arch/s390/kvm/kvm-s390.c

@@ -212,6 +212,10 @@ static void kvm_free_vcpus(struct kvm *kvm)
 	}
 }
 
+void kvm_arch_sync_events(struct kvm *kvm)
+{
+}
+
 void kvm_arch_destroy_vm(struct kvm *kvm)
 {
 	kvm_free_vcpus(kvm);

arch/um/drivers/vde_user.c

@@ -78,7 +78,7 @@ void vde_init_libstuff(struct vde_data *vpri, struct vde_init *init)
 {
 	struct vde_open_args *args;
 
-	vpri->args = kmalloc(sizeof(struct vde_open_args), UM_GFP_KERNEL);
+	vpri->args = uml_kmalloc(sizeof(struct vde_open_args), UM_GFP_KERNEL);
 	if (vpri->args == NULL) {
 		printk(UM_KERN_ERR "vde_init_libstuff - vde_open_args "
 		       "allocation failed");
@@ -91,8 +91,8 @@ void vde_init_libstuff(struct vde_data *vpri, struct vde_init *init)
 	args->group = init->group;
 	args->mode = init->mode ? init->mode : 0700;
 
-	args->port ?  printk(UM_KERN_INFO "port %d", args->port) :
-		printk(UM_KERN_INFO "undefined port");
+	args->port ?  printk("port %d", args->port) :
+		printk("undefined port");
 }
 
 int vde_user_read(void *conn, void *buf, int len)

arch/x86/Kconfig.debug

@@ -175,28 +175,8 @@ config IOMMU_LEAK
 	  Add a simple leak tracer to the IOMMU code. This is useful when you
 	  are debugging a buggy device driver that leaks IOMMU mappings.
 
-config MMIOTRACE
-	bool "Memory mapped IO tracing"
-	depends on DEBUG_KERNEL && PCI
-	select TRACING
-	help
-	  Mmiotrace traces Memory Mapped I/O access and is meant for
-	  debugging and reverse engineering. It is called from the ioremap
-	  implementation and works via page faults. Tracing is disabled by
-	  default and can be enabled at run-time.
-
-	  See Documentation/tracers/mmiotrace.txt.
-	  If you are not helping to develop drivers, say N.
-
-config MMIOTRACE_TEST
-	tristate "Test module for mmiotrace"
-	depends on MMIOTRACE && m
-	help
-	  This is a dumb module for testing mmiotrace. It is very dangerous
-	  as it will write garbage to IO memory starting at a given address.
-	  However, it should be safe to use on e.g. unused portion of VRAM.
-
-	  Say N, unless you absolutely know what you are doing.
+config HAVE_MMIOTRACE_SUPPORT
+	def_bool y
 
 #
 # IO delay types:

arch/x86/include/asm/kvm.h

@@ -9,6 +9,13 @@
 #include <linux/types.h>
 #include <linux/ioctl.h>
 
+/* Select x86 specific features in <linux/kvm.h> */
+#define __KVM_HAVE_PIT
+#define __KVM_HAVE_IOAPIC
+#define __KVM_HAVE_DEVICE_ASSIGNMENT
+#define __KVM_HAVE_MSI
+#define __KVM_HAVE_USER_NMI
+
 /* Architectural interrupt line count. */
 #define KVM_NR_INTERRUPTS 256
 

arch/x86/include/asm/mmzone_32.h

@@ -32,8 +32,6 @@ static inline void get_memcfg_numa(void)
 	get_memcfg_numa_flat();
 }
 
-extern int early_pfn_to_nid(unsigned long pfn);
-
 extern void resume_map_numa_kva(pgd_t *pgd);
 
 #else /* !CONFIG_NUMA */

arch/x86/include/asm/mmzone_64.h

@@ -40,8 +40,6 @@ static inline __attribute__((pure)) int phys_to_nid(unsigned long addr)
 #define node_end_pfn(nid)       (NODE_DATA(nid)->node_start_pfn +	\
 				 NODE_DATA(nid)->node_spanned_pages)
 
-extern int early_pfn_to_nid(unsigned long pfn);
-
 #ifdef CONFIG_NUMA_EMU
 #define FAKE_NODE_MIN_SIZE	(64 * 1024 * 1024)
 #define FAKE_NODE_MIN_HASH_MASK	(~(FAKE_NODE_MIN_SIZE - 1UL))

arch/x86/kernel/acpi/wakeup_64.S

@@ -13,7 +13,6 @@
 	 * Hooray, we are in Long 64-bit mode (but still running in low memory)
 	 */
 ENTRY(wakeup_long64)
-wakeup_long64:
 	movq	saved_magic, %rax
 	movq	$0x123456789abcdef0, %rdx
 	cmpq	%rdx, %rax
@@ -34,16 +33,12 @@ wakeup_long64:
 
 	movq	saved_rip, %rax
 	jmp	*%rax
+ENDPROC(wakeup_long64)
 
 bogus_64_magic:
 	jmp	bogus_64_magic
 
-	.align 2
-	.p2align 4,,15
-.globl do_suspend_lowlevel
-	.type	do_suspend_lowlevel,@function
-do_suspend_lowlevel:
-.LFB5:
+ENTRY(do_suspend_lowlevel)
 	subq	$8, %rsp
 	xorl	%eax, %eax
 	call	save_processor_state
@@ -67,7 +62,7 @@ do_suspend_lowlevel:
 	pushfq
 	popq	pt_regs_flags(%rax)
 
-	movq	$.L97, saved_rip(%rip)
+	movq	$resume_point, saved_rip(%rip)
 
 	movq	%rsp, saved_rsp
 	movq	%rbp, saved_rbp
@@ -78,14 +73,12 @@ do_suspend_lowlevel:
 	addq	$8, %rsp
 	movl	$3, %edi
 	xorl	%eax, %eax
-	jmp	acpi_enter_sleep_state
-.L97:
-	.p2align 4,,7
-.L99:
-	.align 4
-	movl	$24, %eax
-	movw	%ax, %ds
+	call	acpi_enter_sleep_state
+	/* in case something went wrong, restore the machine status and go on */
+	jmp	resume_point
 
+	.align 4
+resume_point:
 	/* We don't restore %rax, it must be 0 anyway */
 	movq	$saved_context, %rax
 	movq	saved_context_cr4(%rax), %rbx
@@ -117,12 +110,9 @@ do_suspend_lowlevel:
 	xorl	%eax, %eax
 	addq	$8, %rsp
 	jmp	restore_processor_state
-.LFE5:
-.Lfe5:
-	.size	do_suspend_lowlevel, .Lfe5-do_suspend_lowlevel
-	
+ENDPROC(do_suspend_lowlevel)
+
 .data
-ALIGN
 ENTRY(saved_rbp)	.quad	0
 ENTRY(saved_rsi)	.quad	0
 ENTRY(saved_rdi)	.quad	0

arch/x86/kernel/apic/apic.c

@@ -837,7 +837,7 @@ void clear_local_APIC(void)
 	}
 
 	/* lets not touch this if we didn't frob it */
-#if defined(CONFIG_X86_MCE_P4THERMAL) || defined(X86_MCE_INTEL)
+#if defined(CONFIG_X86_MCE_P4THERMAL) || defined(CONFIG_X86_MCE_INTEL)
 	if (maxlvt >= 5) {
 		v = apic_read(APIC_LVTTHMR);
 		apic_write(APIC_LVTTHMR, v | APIC_LVT_MASKED);

arch/x86/kernel/apm_32.c

@@ -1192,6 +1192,7 @@ static int suspend(int vetoable)
 	device_suspend(PMSG_SUSPEND);
 	local_irq_disable();
 	device_power_down(PMSG_SUSPEND);
+	sysdev_suspend(PMSG_SUSPEND);
 
 	local_irq_enable();
 
@@ -1208,6 +1209,7 @@ static int suspend(int vetoable)
 	if (err != APM_SUCCESS)
 		apm_error("suspend", err);
 	err = (err == APM_SUCCESS) ? 0 : -EIO;
+	sysdev_resume();
 	device_power_up(PMSG_RESUME);
 	local_irq_enable();
 	device_resume(PMSG_RESUME);
@@ -1228,6 +1230,7 @@ static void standby(void)
 
 	local_irq_disable();
 	device_power_down(PMSG_SUSPEND);
+	sysdev_suspend(PMSG_SUSPEND);
 	local_irq_enable();
 
 	err = set_system_power_state(APM_STATE_STANDBY);
@@ -1235,6 +1238,7 @@ static void standby(void)
 		apm_error("standby", err);
 
 	local_irq_disable();
+	sysdev_resume();
 	device_power_up(PMSG_RESUME);
 	local_irq_enable();
 }

arch/x86/kernel/cpu/cpufreq/powernow-k8.c

@@ -1157,8 +1157,7 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol)
 	data->cpu = pol->cpu;
 	data->currpstate = HW_PSTATE_INVALID;
 
-	rc = powernow_k8_cpu_init_acpi(data);
-	if (rc) {
+	if (powernow_k8_cpu_init_acpi(data)) {
 		/*
 		 * Use the PSB BIOS structure. This is only availabe on
 		 * an UP version, and is deprecated by AMD.
@@ -1176,17 +1175,20 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol)
 			       "ACPI maintainers and complain to your BIOS "
 			       "vendor.\n");
 #endif
-			goto err_out;
+			kfree(data);
+			return -ENODEV;
 		}
 		if (pol->cpu != 0) {
 			printk(KERN_ERR FW_BUG PFX "No ACPI _PSS objects for "
 			       "CPU other than CPU0. Complain to your BIOS "
 			       "vendor.\n");
-			goto err_out;
+			kfree(data);
+			return -ENODEV;
 		}
 		rc = find_psb_table(data);
 		if (rc) {
-			goto err_out;
+			kfree(data);
+			return -ENODEV;
 		}
 		/* Take a crude guess here.
 		 * That guess was in microseconds, so multiply with 1000 */

arch/x86/kernel/cpu/mcheck/mce_64.c

@@ -295,11 +295,11 @@ void do_machine_check(struct pt_regs * regs, long error_code)
 		 * If we know that the error was in user space, send a
 		 * SIGBUS.  Otherwise, panic if tolerance is low.
 		 *
-		 * do_exit() takes an awful lot of locks and has a slight
+		 * force_sig() takes an awful lot of locks and has a slight
 		 * risk of deadlocking.
 		 */
 		if (user_space) {
-			do_exit(SIGBUS);
+			force_sig(SIGBUS, current);
 		} else if (panic_on_oops || tolerant < 2) {
 			mce_panic("Uncorrected machine check",
 				&panicm, mcestart);
@@ -490,7 +490,7 @@ static void __cpuinit mce_cpu_quirks(struct cpuinfo_x86 *c)
 
 }
 
-static void __cpuinit mce_cpu_features(struct cpuinfo_x86 *c)
+static void mce_cpu_features(struct cpuinfo_x86 *c)
 {
 	switch (c->x86_vendor) {
 	case X86_VENDOR_INTEL:
@@ -734,6 +734,7 @@ __setup("mce=", mcheck_enable);
 static int mce_resume(struct sys_device *dev)
 {
 	mce_init(NULL);
+	mce_cpu_features(&current_cpu_data);
 	return 0;
 }
 

arch/x86/kernel/cpu/mcheck/mce_amd_64.c

@@ -121,7 +121,7 @@ static long threshold_restart_bank(void *_tr)
 }
 
 /* cpu init entry point, called from mce.c with preempt off */
-void __cpuinit mce_amd_feature_init(struct cpuinfo_x86 *c)
+void mce_amd_feature_init(struct cpuinfo_x86 *c)
 {
 	unsigned int bank, block;
 	unsigned int cpu = smp_processor_id();

arch/x86/kernel/cpu/mcheck/mce_intel_64.c

@@ -31,7 +31,7 @@ asmlinkage void smp_thermal_interrupt(void)
 	irq_exit();
 }
 
-static void __cpuinit intel_init_thermal(struct cpuinfo_x86 *c)
+static void intel_init_thermal(struct cpuinfo_x86 *c)
 {
 	u32 l, h;
 	int tm2 = 0;
@@ -85,7 +85,7 @@ static void __cpuinit intel_init_thermal(struct cpuinfo_x86 *c)
 	return;
 }
 
-void __cpuinit mce_intel_feature_init(struct cpuinfo_x86 *c)
+void mce_intel_feature_init(struct cpuinfo_x86 *c)
 {
 	intel_init_thermal(c);
 }

arch/x86/kernel/process_32.c

@@ -111,9 +111,6 @@ void cpu_idle(void)
 			check_pgt_cache();
 			rmb();
 
-			if (rcu_pending(cpu))
-				rcu_check_callbacks(cpu, 0);
-
 			if (cpu_is_offline(cpu))
 				play_dead();
 

arch/x86/kernel/setup.c

@@ -1051,7 +1051,7 @@ void __init trap_init_hook(void)
 
 static struct irqaction irq0  = {
 	.handler = timer_interrupt,
-	.flags = IRQF_DISABLED | IRQF_NOBALANCING | IRQF_IRQPOLL,
+	.flags = IRQF_DISABLED | IRQF_NOBALANCING | IRQF_IRQPOLL | IRQF_TIMER,
 	.mask = CPU_MASK_NONE,
 	.name = "timer"
 };

arch/x86/kernel/time_64.c

@@ -115,7 +115,7 @@ unsigned long __init calibrate_cpu(void)
 
 static struct irqaction irq0 = {
 	.handler	= timer_interrupt,
-	.flags		= IRQF_DISABLED | IRQF_IRQPOLL | IRQF_NOBALANCING,
+	.flags		= IRQF_DISABLED | IRQF_IRQPOLL | IRQF_NOBALANCING | IRQF_TIMER,
 	.mask		= CPU_MASK_NONE,
 	.name		= "timer"
 };

arch/x86/kernel/vmiclock_32.c

@@ -202,7 +202,7 @@ static irqreturn_t vmi_timer_interrupt(int irq, void *dev_id)
 static struct irqaction vmi_clock_action  = {
 	.name 		= "vmi-timer",
 	.handler 	= vmi_timer_interrupt,
-	.flags 		= IRQF_DISABLED | IRQF_NOBALANCING,
+	.flags 		= IRQF_DISABLED | IRQF_NOBALANCING | IRQF_TIMER,
 	.mask 		= CPU_MASK_ALL,
 };
 
@@ -283,10 +283,13 @@ void __devinit vmi_time_ap_init(void)
 #endif
 
 /** vmi clocksource */
+static struct clocksource clocksource_vmi;
 
 static cycle_t read_real_cycles(void)
 {
-	return vmi_timer_ops.get_cycle_counter(VMI_CYCLES_REAL);
+	cycle_t ret = (cycle_t)vmi_timer_ops.get_cycle_counter(VMI_CYCLES_REAL);
+	return ret >= clocksource_vmi.cycle_last ?
+		ret : clocksource_vmi.cycle_last;
 }
 
 static struct clocksource clocksource_vmi = {

arch/x86/kvm/i8254.c

@@ -207,7 +207,7 @@ static int __pit_timer_fn(struct kvm_kpit_state *ps)
 	hrtimer_add_expires_ns(&pt->timer, pt->period);
 	pt->scheduled = hrtimer_get_expires_ns(&pt->timer);
 	if (pt->period)
-		ps->channels[0].count_load_time = hrtimer_get_expires(&pt->timer);
+		ps->channels[0].count_load_time = ktime_get();
 
 	return (pt->period == 0 ? 0 : 1);
 }

arch/x86/kvm/irq.c

@@ -87,13 +87,6 @@ void kvm_inject_pending_timer_irqs(struct kvm_vcpu *vcpu)
 }
 EXPORT_SYMBOL_GPL(kvm_inject_pending_timer_irqs);
 
-void kvm_timer_intr_post(struct kvm_vcpu *vcpu, int vec)
-{
-	kvm_apic_timer_intr_post(vcpu, vec);
-	/* TODO: PIT, RTC etc. */
-}
-EXPORT_SYMBOL_GPL(kvm_timer_intr_post);
-
 void __kvm_migrate_timers(struct kvm_vcpu *vcpu)
 {
 	__kvm_migrate_apic_timer(vcpu);

arch/x86/kvm/irq.h

@@ -89,7 +89,6 @@ static inline int irqchip_in_kernel(struct kvm *kvm)
 
 void kvm_pic_reset(struct kvm_kpic_state *s);
 
-void kvm_timer_intr_post(struct kvm_vcpu *vcpu, int vec);
 void kvm_inject_pending_timer_irqs(struct kvm_vcpu *vcpu);
 void kvm_inject_apic_timer_irqs(struct kvm_vcpu *vcpu);
 void kvm_apic_nmi_wd_deliver(struct kvm_vcpu *vcpu);

arch/x86/kvm/lapic.c

@@ -35,6 +35,12 @@
 #include "kvm_cache_regs.h"
 #include "irq.h"
 
+#ifndef CONFIG_X86_64
+#define mod_64(x, y) ((x) - (y) * div64_u64(x, y))
+#else
+#define mod_64(x, y) ((x) % (y))
+#endif
+
 #define PRId64 "d"
 #define PRIx64 "llx"
 #define PRIu64 "u"
@@ -511,52 +517,22 @@ static void apic_send_ipi(struct kvm_lapic *apic)
 
 static u32 apic_get_tmcct(struct kvm_lapic *apic)
 {
-	u64 counter_passed;
-	ktime_t passed, now;
+	ktime_t remaining;
+	s64 ns;
 	u32 tmcct;
 
 	ASSERT(apic != NULL);
 
-	now = apic->timer.dev.base->get_time();
-	tmcct = apic_get_reg(apic, APIC_TMICT);
-
 	/* if initial count is 0, current count should also be 0 */
-	if (tmcct == 0)
+	if (apic_get_reg(apic, APIC_TMICT) == 0)
 		return 0;
 
-	if (unlikely(ktime_to_ns(now) <=
-		ktime_to_ns(apic->timer.last_update))) {
-		/* Wrap around */
-		passed = ktime_add(( {
-				    (ktime_t) {
-				    .tv64 = KTIME_MAX -
-				    (apic->timer.last_update).tv64}; }
-				   ), now);
-		apic_debug("time elapsed\n");
-	} else
-		passed = ktime_sub(now, apic->timer.last_update);
-
-	counter_passed = div64_u64(ktime_to_ns(passed),
-				   (APIC_BUS_CYCLE_NS * apic->timer.divide_count));
-
-	if (counter_passed > tmcct) {
-		if (unlikely(!apic_lvtt_period(apic))) {
-			/* one-shot timers stick at 0 until reset */
-			tmcct = 0;
-		} else {
-			/*
-			 * periodic timers reset to APIC_TMICT when they
-			 * hit 0. The while loop simulates this happening N
-			 * times. (counter_passed %= tmcct) would also work,
-			 * but might be slower or not work on 32-bit??
-			 */
-			while (counter_passed > tmcct)
-				counter_passed -= tmcct;
-			tmcct -= counter_passed;
-		}
-	} else {
-		tmcct -= counter_passed;
-	}
+	remaining = hrtimer_expires_remaining(&apic->timer.dev);
+	if (ktime_to_ns(remaining) < 0)
+		remaining = ktime_set(0, 0);
+
+	ns = mod_64(ktime_to_ns(remaining), apic->timer.period);
+	tmcct = div64_u64(ns, (APIC_BUS_CYCLE_NS * apic->timer.divide_count));
 
 	return tmcct;
 }
@@ -653,8 +629,6 @@ static void start_apic_timer(struct kvm_lapic *apic)
 {
 	ktime_t now = apic->timer.dev.base->get_time();
 
-	apic->timer.last_update = now;
-
 	apic->timer.period = apic_get_reg(apic, APIC_TMICT) *
 		    APIC_BUS_CYCLE_NS * apic->timer.divide_count;
 	atomic_set(&apic->timer.pending, 0);
@@ -1110,16 +1084,6 @@ void kvm_inject_apic_timer_irqs(struct kvm_vcpu *vcpu)
 	}
 }
 
-void kvm_apic_timer_intr_post(struct kvm_vcpu *vcpu, int vec)
-{
-	struct kvm_lapic *apic = vcpu->arch.apic;
-
-	if (apic && apic_lvt_vector(apic, APIC_LVTT) == vec)
-		apic->timer.last_update = ktime_add_ns(
-				apic->timer.last_update,
-				apic->timer.period);
-}
-
 int kvm_get_apic_interrupt(struct kvm_vcpu *vcpu)
 {
 	int vector = kvm_apic_has_interrupt(vcpu);

arch/x86/kvm/lapic.h

@@ -12,7 +12,6 @@ struct kvm_lapic {
 		atomic_t pending;
 		s64 period;	/* unit: ns */
 		u32 divide_count;
-		ktime_t last_update;
 		struct hrtimer dev;
 	} timer;
 	struct kvm_vcpu *vcpu;
@@ -42,7 +41,6 @@ void kvm_set_apic_base(struct kvm_vcpu *vcpu, u64 data);
 void kvm_apic_post_state_restore(struct kvm_vcpu *vcpu);
 int kvm_lapic_enabled(struct kvm_vcpu *vcpu);
 int kvm_lapic_find_highest_irr(struct kvm_vcpu *vcpu);
-void kvm_apic_timer_intr_post(struct kvm_vcpu *vcpu, int vec);
 
 void kvm_lapic_set_vapic_addr(struct kvm_vcpu *vcpu, gpa_t vapic_addr);
 void kvm_lapic_sync_from_vapic(struct kvm_vcpu *vcpu);

arch/x86/kvm/mmu.c

@@ -1698,8 +1698,13 @@ static int set_spte(struct kvm_vcpu *vcpu, u64 *shadow_pte,
 	if (largepage)
 		spte |= PT_PAGE_SIZE_MASK;
 	if (mt_mask) {
-		mt_mask = get_memory_type(vcpu, gfn) <<
-			  kvm_x86_ops->get_mt_mask_shift();
+		if (!kvm_is_mmio_pfn(pfn)) {
+			mt_mask = get_memory_type(vcpu, gfn) <<
+				kvm_x86_ops->get_mt_mask_shift();
+			mt_mask |= VMX_EPT_IGMT_BIT;
+		} else
+			mt_mask = MTRR_TYPE_UNCACHABLE <<
+				kvm_x86_ops->get_mt_mask_shift();
 		spte |= mt_mask;
 	}
 

arch/x86/kvm/svm.c

@@ -1600,7 +1600,6 @@ static void svm_intr_assist(struct kvm_vcpu *vcpu)
 	/* Okay, we can deliver the interrupt: grab it and update PIC state. */
 	intr_vector = kvm_cpu_get_interrupt(vcpu);
 	svm_inject_irq(svm, intr_vector);
-	kvm_timer_intr_post(vcpu, intr_vector);
 out:
 	update_cr8_intercept(vcpu);
 }

arch/x86/kvm/vmx.c

@@ -903,6 +903,7 @@ static int vmx_get_msr(struct kvm_vcpu *vcpu, u32 msr_index, u64 *pdata)
 		data = vmcs_readl(GUEST_SYSENTER_ESP);
 		break;
 	default:
+		vmx_load_host_state(to_vmx(vcpu));
 		msr = find_msr_entry(to_vmx(vcpu), msr_index);
 		if (msr) {
 			data = msr->data;
@@ -3285,7 +3286,6 @@ static void vmx_intr_assist(struct kvm_vcpu *vcpu)
 	}
 	if (vcpu->arch.interrupt.pending) {
 		vmx_inject_irq(vcpu, vcpu->arch.interrupt.nr);
-		kvm_timer_intr_post(vcpu, vcpu->arch.interrupt.nr);
 		if (kvm_cpu_has_interrupt(vcpu))
 			enable_irq_window(vcpu);
 	}
@@ -3687,8 +3687,7 @@ static int __init vmx_init(void)
 	if (vm_need_ept()) {
 		bypass_guest_pf = 0;
 		kvm_mmu_set_base_ptes(VMX_EPT_READABLE_MASK |
-			VMX_EPT_WRITABLE_MASK |
-			VMX_EPT_IGMT_BIT);
+			VMX_EPT_WRITABLE_MASK);
 		kvm_mmu_set_mask_ptes(0ull, 0ull, 0ull, 0ull,
 				VMX_EPT_EXECUTABLE_MASK,
 				VMX_EPT_DEFAULT_MT << VMX_EPT_MT_EPTE_SHIFT);

arch/x86/kvm/x86.c

@@ -967,7 +967,6 @@ int kvm_dev_ioctl_check_extension(long ext)
 	case KVM_CAP_MMU_SHADOW_CACHE_CONTROL:
 	case KVM_CAP_SET_TSS_ADDR:
 	case KVM_CAP_EXT_CPUID:
-	case KVM_CAP_CLOCKSOURCE:
 	case KVM_CAP_PIT:
 	case KVM_CAP_NOP_IO_DELAY:
 	case KVM_CAP_MP_STATE:
@@ -992,6 +991,9 @@ int kvm_dev_ioctl_check_extension(long ext)
 	case KVM_CAP_IOMMU:
 		r = iommu_found();
 		break;
+	case KVM_CAP_CLOCKSOURCE:
+		r = boot_cpu_has(X86_FEATURE_CONSTANT_TSC);
+		break;
 	default:
 		r = 0;
 		break;
@@ -4127,9 +4129,13 @@ static void kvm_free_vcpus(struct kvm *kvm)
 
 }
 
-void kvm_arch_destroy_vm(struct kvm *kvm)
+void kvm_arch_sync_events(struct kvm *kvm)
 {
 	kvm_free_all_assigned_devices(kvm);
+}
+
+void kvm_arch_destroy_vm(struct kvm *kvm)
+{
 	kvm_iommu_unmap_guest(kvm);
 	kvm_free_pit(kvm);
 	kfree(kvm->arch.vpic);

arch/x86/mach-voyager/setup.c

@@ -57,7 +57,7 @@ void __init trap_init_hook(void)
 
 static struct irqaction irq0 = {
 	.handler = timer_interrupt,
-	.flags = IRQF_DISABLED | IRQF_NOBALANCING | IRQF_IRQPOLL,
+	.flags = IRQF_DISABLED | IRQF_NOBALANCING | IRQF_IRQPOLL | IRQF_TIMER,
 	.mask = CPU_MASK_NONE,
 	.name = "timer"
 };

arch/x86/mm/numa_64.c

@@ -166,7 +166,7 @@ int __init compute_hash_shift(struct bootnode *nodes, int numnodes,
 	return shift;
 }
 
-int early_pfn_to_nid(unsigned long pfn)
+int __meminit  __early_pfn_to_nid(unsigned long pfn)
 {
 	return phys_to_nid(pfn << PAGE_SHIFT);
 }

arch/x86/mm/pageattr.c

@@ -508,18 +508,13 @@ static int split_large_page(pte_t *kpte, unsigned long address)
 #endif
 
 	/*
-	 * Install the new, split up pagetable. Important details here:
+	 * Install the new, split up pagetable.
 	 *
-	 * On Intel the NX bit of all levels must be cleared to make a
-	 * page executable. See section 4.13.2 of Intel 64 and IA-32
-	 * Architectures Software Developer's Manual).
-	 *
-	 * Mark the entry present. The current mapping might be
-	 * set to not present, which we preserved above.
+	 * We use the standard kernel pagetable protections for the new
+	 * pagetable protections, the actual ptes set above control the
+	 * primary protection behavior:
 	 */
-	ref_prot = pte_pgprot(pte_mkexec(pte_clrhuge(*kpte)));
-	pgprot_val(ref_prot) |= _PAGE_PRESENT;
-	__set_pmd_pte(kpte, address, mk_pte(base, ref_prot));
+	__set_pmd_pte(kpte, address, mk_pte(base, __pgprot(_KERNPG_TABLE)));
 	base = NULL;
 
 out_unlock:

block/blk-timeout.c

@@ -209,12 +209,19 @@ void blk_abort_queue(struct request_queue *q)
 {
 	unsigned long flags;
 	struct request *rq, *tmp;
+	LIST_HEAD(list);
 
 	spin_lock_irqsave(q->queue_lock, flags);
 
 	elv_abort_queue(q);
 
-	list_for_each_entry_safe(rq, tmp, &q->timeout_list, timeout_list)
+	/*
+	 * Splice entries to local list, to avoid deadlocking if entries
+	 * get readded to the timeout list by error handling
+	 */
+	list_splice_init(&q->timeout_list, &list);
+
+	list_for_each_entry_safe(rq, tmp, &list, timeout_list)
 		blk_abort_request(rq);
 
 	spin_unlock_irqrestore(q->queue_lock, flags);

block/blktrace.c

@@ -142,7 +142,7 @@ static void __blk_add_trace(struct blk_trace *bt, sector_t sector, int bytes,
 
 	what |= ddir_act[rw & WRITE];
 	what |= MASK_TC_BIT(rw, BARRIER);
-	what |= MASK_TC_BIT(rw, SYNC);
+	what |= MASK_TC_BIT(rw, SYNCIO);
 	what |= MASK_TC_BIT(rw, AHEAD);
 	what |= MASK_TC_BIT(rw, META);
 	what |= MASK_TC_BIT(rw, DISCARD);