Merge branch 'pm-cpufreq'

* pm-cpufreq:
  intel_pstate: skip the driver if ACPI has power mgmt option
  cpufreq: ondemand: Remove redundant return statement
  cpufreq: move freq change notifications to cpufreq core
  cpufreq: distinguish drivers that do asynchronous notifications
  cpufreq/intel_pstate: Add static declarations to internal functions
  cpufreq: arm_big_little: reconfigure switcher behavior at run time
  cpufreq: arm_big_little: add in-kernel switching (IKS) support
  ARM: vexpress/TC2: register vexpress-spc cpufreq device
  cpufreq: arm_big_little: add vexpress SPC interface driver
  ARM: vexpress/TC2: add cpu clock support
  ARM: vexpress/TC2: add support for CPU DVFS

arch/arm/mach-vexpress/Kconfig

@@ -66,10 +66,22 @@ config ARCH_VEXPRESS_DCSCB
 	  This is needed to provide CPU and cluster power management
 	  on RTSM implementing big.LITTLE.
 
+config ARCH_VEXPRESS_SPC
+	bool "Versatile Express Serial Power Controller (SPC)"
+	select ARCH_HAS_CPUFREQ
+	select ARCH_HAS_OPP
+	select PM_OPP
+	help
+	  The TC2 (A15x2 A7x3) versatile express core tile integrates a logic
+	  block called Serial Power Controller (SPC) that provides the interface
+	  between the dual cluster test-chip and the M3 microcontroller that
+	  carries out power management.
+
 config ARCH_VEXPRESS_TC2_PM
 	bool "Versatile Express TC2 power management"
 	depends on MCPM
 	select ARM_CCI
+	select ARCH_VEXPRESS_SPC
 	help
 	  Support for CPU and cluster power management on Versatile Express
 	  with a TC2 (A15x2 A7x3) big.LITTLE core tile.

arch/arm/mach-vexpress/Makefile

@@ -8,7 +8,8 @@ obj-y					:= v2m.o
 obj-$(CONFIG_ARCH_VEXPRESS_CA9X4)	+= ct-ca9x4.o
 obj-$(CONFIG_ARCH_VEXPRESS_DCSCB)	+= dcscb.o	dcscb_setup.o
 CFLAGS_dcscb.o				+= -march=armv7-a
-obj-$(CONFIG_ARCH_VEXPRESS_TC2_PM)	+= tc2_pm.o spc.o
+obj-$(CONFIG_ARCH_VEXPRESS_SPC)		+= spc.o
+obj-$(CONFIG_ARCH_VEXPRESS_TC2_PM)	+= tc2_pm.o
 CFLAGS_tc2_pm.o				+= -march=armv7-a
 obj-$(CONFIG_SMP)			+= platsmp.o
 obj-$(CONFIG_HOTPLUG_CPU)		+= hotplug.o

arch/arm/mach-vexpress/spc.c

@@ -17,14 +17,31 @@
  * GNU General Public License for more details.
  */
 
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/cpu.h>
+#include <linux/delay.h>
 #include <linux/err.h>
+#include <linux/interrupt.h>
 #include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/pm_opp.h>
 #include <linux/slab.h>
+#include <linux/semaphore.h>
 
 #include <asm/cacheflush.h>
 
 #define SPCLOG "vexpress-spc: "
 
+#define PERF_LVL_A15		0x00
+#define PERF_REQ_A15		0x04
+#define PERF_LVL_A7		0x08
+#define PERF_REQ_A7		0x0c
+#define COMMS			0x10
+#define COMMS_REQ		0x14
+#define PWC_STATUS		0x18
+#define PWC_FLAG		0x1c
+
 /* SPC wake-up IRQs status and mask */
 #define WAKE_INT_MASK		0x24
 #define WAKE_INT_RAW		0x28
@@ -36,12 +53,45 @@
 #define A15_BX_ADDR0		0x68
 #define A7_BX_ADDR0		0x78
 
+/* SPC system config interface registers */
+#define SYSCFG_WDATA		0x70
+#define SYSCFG_RDATA		0x74
+
+/* A15/A7 OPP virtual register base */
+#define A15_PERFVAL_BASE	0xC10
+#define A7_PERFVAL_BASE		0xC30
+
+/* Config interface control bits */
+#define SYSCFG_START		(1 << 31)
+#define SYSCFG_SCC		(6 << 20)
+#define SYSCFG_STAT		(14 << 20)
+
 /* wake-up interrupt masks */
 #define GBL_WAKEUP_INT_MSK	(0x3 << 10)
 
 /* TC2 static dual-cluster configuration */
 #define MAX_CLUSTERS		2
 
+/*
+ * Even though the SPC takes max 3-5 ms to complete any OPP/COMMS
+ * operation, the operation could start just before jiffie is about
+ * to be incremented. So setting timeout value of 20ms = 2jiffies@100Hz
+ */
+#define TIMEOUT_US	20000
+
+#define MAX_OPPS	8
+#define CA15_DVFS	0
+#define CA7_DVFS	1
+#define SPC_SYS_CFG	2
+#define STAT_COMPLETE(type)	((1 << 0) << (type << 2))
+#define STAT_ERR(type)		((1 << 1) << (type << 2))
+#define RESPONSE_MASK(type)	(STAT_COMPLETE(type) | STAT_ERR(type))
+
+struct ve_spc_opp {
+	unsigned long freq;
+	unsigned long u_volt;
+};
+
 struct ve_spc_drvdata {
 	void __iomem *baseaddr;
 	/*
@@ -49,6 +99,12 @@ struct ve_spc_drvdata {
 	 * It corresponds to A15 processors MPIDR[15:8] bitfield
 	 */
 	u32 a15_clusid;
+	uint32_t cur_rsp_mask;
+	uint32_t cur_rsp_stat;
+	struct semaphore sem;
+	struct completion done;
+	struct ve_spc_opp *opps[MAX_CLUSTERS];
+	int num_opps[MAX_CLUSTERS];
 };
 
 static struct ve_spc_drvdata *info;
@@ -157,8 +213,197 @@ void ve_spc_powerdown(u32 cluster, bool enable)
 	writel_relaxed(enable, info->baseaddr + pwdrn_reg);
 }
 
-int __init ve_spc_init(void __iomem *baseaddr, u32 a15_clusid)
+static int ve_spc_get_performance(int cluster, u32 *freq)
+{
+	struct ve_spc_opp *opps = info->opps[cluster];
+	u32 perf_cfg_reg = 0;
+	u32 perf;
+
+	perf_cfg_reg = cluster_is_a15(cluster) ? PERF_LVL_A15 : PERF_LVL_A7;
+
+	perf = readl_relaxed(info->baseaddr + perf_cfg_reg);
+	if (perf >= info->num_opps[cluster])
+		return -EINVAL;
+
+	opps += perf;
+	*freq = opps->freq;
+
+	return 0;
+}
+
+/* find closest match to given frequency in OPP table */
+static int ve_spc_round_performance(int cluster, u32 freq)
+{
+	int idx, max_opp = info->num_opps[cluster];
+	struct ve_spc_opp *opps = info->opps[cluster];
+	u32 fmin = 0, fmax = ~0, ftmp;
+
+	freq /= 1000; /* OPP entries in kHz */
+	for (idx = 0; idx < max_opp; idx++, opps++) {
+		ftmp = opps->freq;
+		if (ftmp >= freq) {
+			if (ftmp <= fmax)
+				fmax = ftmp;
+		} else {
+			if (ftmp >= fmin)
+				fmin = ftmp;
+		}
+	}
+	if (fmax != ~0)
+		return fmax * 1000;
+	else
+		return fmin * 1000;
+}
+
+static int ve_spc_find_performance_index(int cluster, u32 freq)
+{
+	int idx, max_opp = info->num_opps[cluster];
+	struct ve_spc_opp *opps = info->opps[cluster];
+
+	for (idx = 0; idx < max_opp; idx++, opps++)
+		if (opps->freq == freq)
+			break;
+	return (idx == max_opp) ? -EINVAL : idx;
+}
+
+static int ve_spc_waitforcompletion(int req_type)
+{
+	int ret = wait_for_completion_interruptible_timeout(
+			&info->done, usecs_to_jiffies(TIMEOUT_US));
+	if (ret == 0)
+		ret = -ETIMEDOUT;
+	else if (ret > 0)
+		ret = info->cur_rsp_stat & STAT_COMPLETE(req_type) ? 0 : -EIO;
+	return ret;
+}
+
+static int ve_spc_set_performance(int cluster, u32 freq)
+{
+	u32 perf_cfg_reg, perf_stat_reg;
+	int ret, perf, req_type;
+
+	if (cluster_is_a15(cluster)) {
+		req_type = CA15_DVFS;
+		perf_cfg_reg = PERF_LVL_A15;
+		perf_stat_reg = PERF_REQ_A15;
+	} else {
+		req_type = CA7_DVFS;
+		perf_cfg_reg = PERF_LVL_A7;
+		perf_stat_reg = PERF_REQ_A7;
+	}
+
+	perf = ve_spc_find_performance_index(cluster, freq);
+
+	if (perf < 0)
+		return perf;
+
+	if (down_timeout(&info->sem, usecs_to_jiffies(TIMEOUT_US)))
+		return -ETIME;
+
+	init_completion(&info->done);
+	info->cur_rsp_mask = RESPONSE_MASK(req_type);
+
+	writel(perf, info->baseaddr + perf_cfg_reg);
+	ret = ve_spc_waitforcompletion(req_type);
+
+	info->cur_rsp_mask = 0;
+	up(&info->sem);
+
+	return ret;
+}
+
+static int ve_spc_read_sys_cfg(int func, int offset, uint32_t *data)
+{
+	int ret;
+
+	if (down_timeout(&info->sem, usecs_to_jiffies(TIMEOUT_US)))
+		return -ETIME;
+
+	init_completion(&info->done);
+	info->cur_rsp_mask = RESPONSE_MASK(SPC_SYS_CFG);
+
+	/* Set the control value */
+	writel(SYSCFG_START | func | offset >> 2, info->baseaddr + COMMS);
+	ret = ve_spc_waitforcompletion(SPC_SYS_CFG);
+
+	if (ret == 0)
+		*data = readl(info->baseaddr + SYSCFG_RDATA);
+
+	info->cur_rsp_mask = 0;
+	up(&info->sem);
+
+	return ret;
+}
+
+static irqreturn_t ve_spc_irq_handler(int irq, void *data)
+{
+	struct ve_spc_drvdata *drv_data = data;
+	uint32_t status = readl_relaxed(drv_data->baseaddr + PWC_STATUS);
+
+	if (info->cur_rsp_mask & status) {
+		info->cur_rsp_stat = status;
+		complete(&drv_data->done);
+	}
+
+	return IRQ_HANDLED;
+}
+
+/*
+ *  +--------------------------+
+ *  | 31      20 | 19        0 |
+ *  +--------------------------+
+ *  |   u_volt   |  freq(kHz)  |
+ *  +--------------------------+
+ */
+#define MULT_FACTOR	20
+#define VOLT_SHIFT	20
+#define FREQ_MASK	(0xFFFFF)
+static int ve_spc_populate_opps(uint32_t cluster)
 {
+	uint32_t data = 0, off, ret, idx;
+	struct ve_spc_opp *opps;
+
+	opps = kzalloc(sizeof(*opps) * MAX_OPPS, GFP_KERNEL);
+	if (!opps)
+		return -ENOMEM;
+
+	info->opps[cluster] = opps;
+
+	off = cluster_is_a15(cluster) ? A15_PERFVAL_BASE : A7_PERFVAL_BASE;
+	for (idx = 0; idx < MAX_OPPS; idx++, off += 4, opps++) {
+		ret = ve_spc_read_sys_cfg(SYSCFG_SCC, off, &data);
+		if (!ret) {
+			opps->freq = (data & FREQ_MASK) * MULT_FACTOR;
+			opps->u_volt = data >> VOLT_SHIFT;
+		} else {
+			break;
+		}
+	}
+	info->num_opps[cluster] = idx;
+
+	return ret;
+}
+
+static int ve_init_opp_table(struct device *cpu_dev)
+{
+	int cluster = topology_physical_package_id(cpu_dev->id);
+	int idx, ret = 0, max_opp = info->num_opps[cluster];
+	struct ve_spc_opp *opps = info->opps[cluster];
+
+	for (idx = 0; idx < max_opp; idx++, opps++) {
+		ret = dev_pm_opp_add(cpu_dev, opps->freq * 1000, opps->u_volt);
+		if (ret) {
+			dev_warn(cpu_dev, "failed to add opp %lu %lu\n",
+				 opps->freq, opps->u_volt);
+			return ret;
+		}
+	}
+	return ret;
+}
+
+int __init ve_spc_init(void __iomem *baseaddr, u32 a15_clusid, int irq)
+{
+	int ret;
 	info = kzalloc(sizeof(*info), GFP_KERNEL);
 	if (!info) {
 		pr_err(SPCLOG "unable to allocate mem\n");
@@ -168,6 +413,25 @@ int __init ve_spc_init(void __iomem *baseaddr, u32 a15_clusid)
 	info->baseaddr = baseaddr;
 	info->a15_clusid = a15_clusid;
 
+	if (irq <= 0) {
+		pr_err(SPCLOG "Invalid IRQ %d\n", irq);
+		kfree(info);
+		return -EINVAL;
+	}
+
+	init_completion(&info->done);
+
+	readl_relaxed(info->baseaddr + PWC_STATUS);
+
+	ret = request_irq(irq, ve_spc_irq_handler, IRQF_TRIGGER_HIGH
+				| IRQF_ONESHOT, "vexpress-spc", info);
+	if (ret) {
+		pr_err(SPCLOG "IRQ %d request failed\n", irq);
+		kfree(info);
+		return -ENODEV;
+	}
+
+	sema_init(&info->sem, 1);
 	/*
 	 * Multi-cluster systems may need this data when non-coherent, during
 	 * cluster power-up/power-down. Make sure driver info reaches main
@@ -178,3 +442,103 @@ int __init ve_spc_init(void __iomem *baseaddr, u32 a15_clusid)
 
 	return 0;
 }
+
+struct clk_spc {
+	struct clk_hw hw;
+	int cluster;
+};
+
+#define to_clk_spc(spc) container_of(spc, struct clk_spc, hw)
+static unsigned long spc_recalc_rate(struct clk_hw *hw,
+		unsigned long parent_rate)
+{
+	struct clk_spc *spc = to_clk_spc(hw);
+	u32 freq;
+
+	if (ve_spc_get_performance(spc->cluster, &freq))
+		return -EIO;
+
+	return freq * 1000;
+}
+
+static long spc_round_rate(struct clk_hw *hw, unsigned long drate,
+		unsigned long *parent_rate)
+{
+	struct clk_spc *spc = to_clk_spc(hw);
+
+	return ve_spc_round_performance(spc->cluster, drate);
+}
+
+static int spc_set_rate(struct clk_hw *hw, unsigned long rate,
+		unsigned long parent_rate)
+{
+	struct clk_spc *spc = to_clk_spc(hw);
+
+	return ve_spc_set_performance(spc->cluster, rate / 1000);
+}
+
+static struct clk_ops clk_spc_ops = {
+	.recalc_rate = spc_recalc_rate,
+	.round_rate = spc_round_rate,
+	.set_rate = spc_set_rate,
+};
+
+static struct clk *ve_spc_clk_register(struct device *cpu_dev)
+{
+	struct clk_init_data init;
+	struct clk_spc *spc;
+
+	spc = kzalloc(sizeof(*spc), GFP_KERNEL);
+	if (!spc) {
+		pr_err("could not allocate spc clk\n");
+		return ERR_PTR(-ENOMEM);
+	}
+
+	spc->hw.init = &init;
+	spc->cluster = topology_physical_package_id(cpu_dev->id);
+
+	init.name = dev_name(cpu_dev);
+	init.ops = &clk_spc_ops;
+	init.flags = CLK_IS_ROOT | CLK_GET_RATE_NOCACHE;
+	init.num_parents = 0;
+
+	return devm_clk_register(cpu_dev, &spc->hw);
+}
+
+static int __init ve_spc_clk_init(void)
+{
+	int cpu;
+	struct clk *clk;
+
+	if (!info)
+		return 0; /* Continue only if SPC is initialised */
+
+	if (ve_spc_populate_opps(0) || ve_spc_populate_opps(1)) {
+		pr_err("failed to build OPP table\n");
+		return -ENODEV;
+	}
+
+	for_each_possible_cpu(cpu) {
+		struct device *cpu_dev = get_cpu_device(cpu);
+		if (!cpu_dev) {
+			pr_warn("failed to get cpu%d device\n", cpu);
+			continue;
+		}
+		clk = ve_spc_clk_register(cpu_dev);
+		if (IS_ERR(clk)) {
+			pr_warn("failed to register cpu%d clock\n", cpu);
+			continue;
+		}
+		if (clk_register_clkdev(clk, NULL, dev_name(cpu_dev))) {
+			pr_warn("failed to register cpu%d clock lookup\n", cpu);
+			continue;
+		}
+
+		if (ve_init_opp_table(cpu_dev))
+			pr_warn("failed to initialise cpu%d opp table\n", cpu);
+	}
+
+	platform_device_register_simple("vexpress-spc-cpufreq", -1, NULL, 0);
+	return 0;
+}
+module_init(ve_spc_clk_init);

arch/arm/mach-vexpress/spc.h

@@ -15,7 +15,7 @@
 #ifndef __SPC_H_
 #define __SPC_H_
 
-int __init ve_spc_init(void __iomem *base, u32 a15_clusid);
+int __init ve_spc_init(void __iomem *base, u32 a15_clusid, int irq);
 void ve_spc_global_wakeup_irq(bool set);
 void ve_spc_cpu_wakeup_irq(u32 cluster, u32 cpu, bool set);
 void ve_spc_set_resume_addr(u32 cluster, u32 cpu, u32 addr);

arch/arm/mach-vexpress/tc2_pm.c

@@ -16,6 +16,7 @@
 #include <linux/io.h>
 #include <linux/kernel.h>
 #include <linux/of_address.h>
+#include <linux/of_irq.h>
 #include <linux/spinlock.h>
 #include <linux/errno.h>
 #include <linux/irqchip/arm-gic.h>
@@ -311,7 +312,7 @@ static void __naked tc2_pm_power_up_setup(unsigned int affinity_level)
 
 static int __init tc2_pm_init(void)
 {
-	int ret;
+	int ret, irq;
 	void __iomem *scc;
 	u32 a15_cluster_id, a7_cluster_id, sys_info;
 	struct device_node *np;
@@ -336,13 +337,15 @@ static int __init tc2_pm_init(void)
 	tc2_nr_cpus[a15_cluster_id] = (sys_info >> 16) & 0xf;
 	tc2_nr_cpus[a7_cluster_id] = (sys_info >> 20) & 0xf;
 
+	irq = irq_of_parse_and_map(np, 0);
+
 	/*
 	 * A subset of the SCC registers is also used to communicate
 	 * with the SPC (power controller). We need to be able to
 	 * drive it very early in the boot process to power up
 	 * processors, so we initialize the SPC driver here.
 	 */
-	ret = ve_spc_init(scc + SPC_BASE, a15_cluster_id);
+	ret = ve_spc_init(scc + SPC_BASE, a15_cluster_id, irq);
 	if (ret)
 		return ret;
 

drivers/cpufreq/Kconfig.arm

@@ -224,3 +224,11 @@ config ARM_TEGRA_CPUFREQ
 	default y
 	help
 	  This adds the CPUFreq driver support for TEGRA SOCs.
+
+config ARM_VEXPRESS_SPC_CPUFREQ
+        tristate "Versatile Express SPC based CPUfreq driver"
+        select ARM_BIG_LITTLE_CPUFREQ
+        depends on ARCH_VEXPRESS_SPC
+        help
+          This add the CPUfreq driver support for Versatile Express
+	  big.LITTLE platforms using SPC for power management.

drivers/cpufreq/Makefile

@@ -74,6 +74,7 @@ obj-$(CONFIG_ARM_SA1100_CPUFREQ)	+= sa1100-cpufreq.o
 obj-$(CONFIG_ARM_SA1110_CPUFREQ)	+= sa1110-cpufreq.o
 obj-$(CONFIG_ARM_SPEAR_CPUFREQ)		+= spear-cpufreq.o
 obj-$(CONFIG_ARM_TEGRA_CPUFREQ)		+= tegra-cpufreq.o
+obj-$(CONFIG_ARM_VEXPRESS_SPC_CPUFREQ)	+= vexpress-spc-cpufreq.o
 
 ##################################################################################
 # PowerPC platform drivers

drivers/cpufreq/acpi-cpufreq.c

@@ -428,14 +428,10 @@ static int acpi_cpufreq_target(struct cpufreq_policy *policy,
 {
 	struct acpi_cpufreq_data *data = per_cpu(acfreq_data, policy->cpu);
 	struct acpi_processor_performance *perf;
-	struct cpufreq_freqs freqs;
 	struct drv_cmd cmd;
 	unsigned int next_perf_state = 0; /* Index into perf table */
 	int result = 0;
 
-	pr_debug("acpi_cpufreq_target %d (%d)\n",
-			data->freq_table[index].frequency, policy->cpu);
-
 	if (unlikely(data == NULL ||
 	     data->acpi_data == NULL || data->freq_table == NULL)) {
 		return -ENODEV;
@@ -483,23 +479,17 @@ static int acpi_cpufreq_target(struct cpufreq_policy *policy,
 	else
 		cmd.mask = cpumask_of(policy->cpu);
 
-	freqs.old = perf->states[perf->state].core_frequency * 1000;
-	freqs.new = data->freq_table[index].frequency;
-	cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
-
 	drv_write(&cmd);
 
 	if (acpi_pstate_strict) {
-		if (!check_freqs(cmd.mask, freqs.new, data)) {
+		if (!check_freqs(cmd.mask, data->freq_table[index].frequency,
+					data)) {
 			pr_debug("acpi_cpufreq_target failed (%d)\n",
 				policy->cpu);
 			result = -EAGAIN;
-			freqs.new = freqs.old;
 		}
 	}
 
-	cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
-
 	if (!result)
 		perf->state = next_perf_state;
 

drivers/cpufreq/arm_big_little.c

@@ -24,91 +24,319 @@
 #include <linux/cpufreq.h>
 #include <linux/cpumask.h>
 #include <linux/export.h>
+#include <linux/mutex.h>
 #include <linux/of_platform.h>
 #include <linux/pm_opp.h>
 #include <linux/slab.h>
 #include <linux/topology.h>
 #include <linux/types.h>
+#include <asm/bL_switcher.h>
 
 #include "arm_big_little.h"
 
 /* Currently we support only two clusters */
+#define A15_CLUSTER	0
+#define A7_CLUSTER	1
 #define MAX_CLUSTERS	2
 
+#ifdef CONFIG_BL_SWITCHER
+static bool bL_switching_enabled;
+#define is_bL_switching_enabled()	bL_switching_enabled
+#define set_switching_enabled(x)	(bL_switching_enabled = (x))
+#else
+#define is_bL_switching_enabled()	false
+#define set_switching_enabled(x)	do { } while (0)
+#endif
+
+#define ACTUAL_FREQ(cluster, freq)  ((cluster == A7_CLUSTER) ? freq << 1 : freq)
+#define VIRT_FREQ(cluster, freq)    ((cluster == A7_CLUSTER) ? freq >> 1 : freq)
+
 static struct cpufreq_arm_bL_ops *arm_bL_ops;
 static struct clk *clk[MAX_CLUSTERS];
-static struct cpufreq_frequency_table *freq_table[MAX_CLUSTERS];
-static atomic_t cluster_usage[MAX_CLUSTERS] = {ATOMIC_INIT(0), ATOMIC_INIT(0)};
+static struct cpufreq_frequency_table *freq_table[MAX_CLUSTERS + 1];
+static atomic_t cluster_usage[MAX_CLUSTERS + 1];
+
+static unsigned int clk_big_min;	/* (Big) clock frequencies */
+static unsigned int clk_little_max;	/* Maximum clock frequency (Little) */
+
+static DEFINE_PER_CPU(unsigned int, physical_cluster);
+static DEFINE_PER_CPU(unsigned int, cpu_last_req_freq);
+
+static struct mutex cluster_lock[MAX_CLUSTERS];
+
+static inline int raw_cpu_to_cluster(int cpu)
+{
+	return topology_physical_package_id(cpu);
+}
+
+static inline int cpu_to_cluster(int cpu)
+{
+	return is_bL_switching_enabled() ?
+		MAX_CLUSTERS : raw_cpu_to_cluster(cpu);
+}
+
+static unsigned int find_cluster_maxfreq(int cluster)
+{
+	int j;
+	u32 max_freq = 0, cpu_freq;
+
+	for_each_online_cpu(j) {
+		cpu_freq = per_cpu(cpu_last_req_freq, j);
+
+		if ((cluster == per_cpu(physical_cluster, j)) &&
+				(max_freq < cpu_freq))
+			max_freq = cpu_freq;
+	}
+
+	pr_debug("%s: cluster: %d, max freq: %d\n", __func__, cluster,
+			max_freq);
+
+	return max_freq;
+}
+
+static unsigned int clk_get_cpu_rate(unsigned int cpu)
+{
+	u32 cur_cluster = per_cpu(physical_cluster, cpu);
+	u32 rate = clk_get_rate(clk[cur_cluster]) / 1000;
+
+	/* For switcher we use virtual A7 clock rates */
+	if (is_bL_switching_enabled())
+		rate = VIRT_FREQ(cur_cluster, rate);
+
+	pr_debug("%s: cpu: %d, cluster: %d, freq: %u\n", __func__, cpu,
+			cur_cluster, rate);
+
+	return rate;
+}
+
+static unsigned int bL_cpufreq_get_rate(unsigned int cpu)
+{
+	if (is_bL_switching_enabled()) {
+		pr_debug("%s: freq: %d\n", __func__, per_cpu(cpu_last_req_freq,
+					cpu));
+
+		return per_cpu(cpu_last_req_freq, cpu);
+	} else {
+		return clk_get_cpu_rate(cpu);
+	}
+}
 
-static unsigned int bL_cpufreq_get(unsigned int cpu)
+static unsigned int
+bL_cpufreq_set_rate(u32 cpu, u32 old_cluster, u32 new_cluster, u32 rate)
 {
-	u32 cur_cluster = cpu_to_cluster(cpu);
+	u32 new_rate, prev_rate;
+	int ret;
+	bool bLs = is_bL_switching_enabled();
+
+	mutex_lock(&cluster_lock[new_cluster]);
+
+	if (bLs) {
+		prev_rate = per_cpu(cpu_last_req_freq, cpu);
+		per_cpu(cpu_last_req_freq, cpu) = rate;
+		per_cpu(physical_cluster, cpu) = new_cluster;
+
+		new_rate = find_cluster_maxfreq(new_cluster);
+		new_rate = ACTUAL_FREQ(new_cluster, new_rate);
+	} else {
+		new_rate = rate;
+	}
+
+	pr_debug("%s: cpu: %d, old cluster: %d, new cluster: %d, freq: %d\n",
+			__func__, cpu, old_cluster, new_cluster, new_rate);
+
+	ret = clk_set_rate(clk[new_cluster], new_rate * 1000);
+	if (WARN_ON(ret)) {
+		pr_err("clk_set_rate failed: %d, new cluster: %d\n", ret,
+				new_cluster);
+		if (bLs) {
+			per_cpu(cpu_last_req_freq, cpu) = prev_rate;
+			per_cpu(physical_cluster, cpu) = old_cluster;
+		}
+
+		mutex_unlock(&cluster_lock[new_cluster]);
+
+		return ret;
+	}
+
+	mutex_unlock(&cluster_lock[new_cluster]);
+
+	/* Recalc freq for old cluster when switching clusters */
+	if (old_cluster != new_cluster) {
+		pr_debug("%s: cpu: %d, old cluster: %d, new cluster: %d\n",
+				__func__, cpu, old_cluster, new_cluster);
+
+		/* Switch cluster */
+		bL_switch_request(cpu, new_cluster);
+
+		mutex_lock(&cluster_lock[old_cluster]);
 
-	return clk_get_rate(clk[cur_cluster]) / 1000;
+		/* Set freq of old cluster if there are cpus left on it */
+		new_rate = find_cluster_maxfreq(old_cluster);
+		new_rate = ACTUAL_FREQ(old_cluster, new_rate);
+
+		if (new_rate) {
+			pr_debug("%s: Updating rate of old cluster: %d, to freq: %d\n",
+					__func__, old_cluster, new_rate);
+
+			if (clk_set_rate(clk[old_cluster], new_rate * 1000))
+				pr_err("%s: clk_set_rate failed: %d, old cluster: %d\n",
+						__func__, ret, old_cluster);
+		}
+		mutex_unlock(&cluster_lock[old_cluster]);
+	}
+
+	return 0;
 }
 
 /* Set clock frequency */
 static int bL_cpufreq_set_target(struct cpufreq_policy *policy,
 		unsigned int index)
 {
-	struct cpufreq_freqs freqs;
-	u32 cpu = policy->cpu, cur_cluster;
-	int ret = 0;
+	u32 cpu = policy->cpu, cur_cluster, new_cluster, actual_cluster;
+	unsigned int freqs_new;
+
+	cur_cluster = cpu_to_cluster(cpu);
+	new_cluster = actual_cluster = per_cpu(physical_cluster, cpu);
+
+	freqs_new = freq_table[cur_cluster][index].frequency;
+
+	if (is_bL_switching_enabled()) {
+		if ((actual_cluster == A15_CLUSTER) &&
+				(freqs_new < clk_big_min)) {
+			new_cluster = A7_CLUSTER;
+		} else if ((actual_cluster == A7_CLUSTER) &&
+				(freqs_new > clk_little_max)) {
+			new_cluster = A15_CLUSTER;
+		}
+	}
 
-	cur_cluster = cpu_to_cluster(policy->cpu);
+	return bL_cpufreq_set_rate(cpu, actual_cluster, new_cluster, freqs_new);
+}
 
-	freqs.old = bL_cpufreq_get(policy->cpu);
-	freqs.new = freq_table[cur_cluster][index].frequency;
+static inline u32 get_table_count(struct cpufreq_frequency_table *table)
+{
+	int count;
 
-	pr_debug("%s: cpu: %d, cluster: %d, oldfreq: %d, target freq: %d, new freq: %d\n",
-			__func__, cpu, cur_cluster, freqs.old, freqs.new,
-			freqs.new);
+	for (count = 0; table[count].frequency != CPUFREQ_TABLE_END; count++)
+		;
 
-	cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
+	return count;
+}
 
-	ret = clk_set_rate(clk[cur_cluster], freqs.new * 1000);
-	if (ret) {
-		pr_err("clk_set_rate failed: %d\n", ret);
-		freqs.new = freqs.old;
+/* get the minimum frequency in the cpufreq_frequency_table */
+static inline u32 get_table_min(struct cpufreq_frequency_table *table)
+{
+	int i;
+	uint32_t min_freq = ~0;
+	for (i = 0; (table[i].frequency != CPUFREQ_TABLE_END); i++)
+		if (table[i].frequency < min_freq)
+			min_freq = table[i].frequency;
+	return min_freq;
+}
+
+/* get the maximum frequency in the cpufreq_frequency_table */
+static inline u32 get_table_max(struct cpufreq_frequency_table *table)
+{
+	int i;
+	uint32_t max_freq = 0;
+	for (i = 0; (table[i].frequency != CPUFREQ_TABLE_END); i++)
+		if (table[i].frequency > max_freq)
+			max_freq = table[i].frequency;
+	return max_freq;
+}
+
+static int merge_cluster_tables(void)
+{
+	int i, j, k = 0, count = 1;
+	struct cpufreq_frequency_table *table;
+
+	for (i = 0; i < MAX_CLUSTERS; i++)
+		count += get_table_count(freq_table[i]);
+
+	table = kzalloc(sizeof(*table) * count, GFP_KERNEL);
+	if (!table)
+		return -ENOMEM;
+
+	freq_table[MAX_CLUSTERS] = table;
+
+	/* Add in reverse order to get freqs in increasing order */
+	for (i = MAX_CLUSTERS - 1; i >= 0; i--) {
+		for (j = 0; freq_table[i][j].frequency != CPUFREQ_TABLE_END;
+				j++) {
+			table[k].frequency = VIRT_FREQ(i,
+					freq_table[i][j].frequency);
+			pr_debug("%s: index: %d, freq: %d\n", __func__, k,
+					table[k].frequency);
+			k++;
+		}
 	}
 
-	cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
+	table[k].driver_data = k;
+	table[k].frequency = CPUFREQ_TABLE_END;
 
-	return ret;
+	pr_debug("%s: End, table: %p, count: %d\n", __func__, table, k);
+
+	return 0;
+}
+
+static void _put_cluster_clk_and_freq_table(struct device *cpu_dev)
+{
+	u32 cluster = raw_cpu_to_cluster(cpu_dev->id);
+
+	if (!freq_table[cluster])
+		return;
+
+	clk_put(clk[cluster]);
+	dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table[cluster]);
+	dev_dbg(cpu_dev, "%s: cluster: %d\n", __func__, cluster);
 }
 
 static void put_cluster_clk_and_freq_table(struct device *cpu_dev)
 {
 	u32 cluster = cpu_to_cluster(cpu_dev->id);
+	int i;
+
+	if (atomic_dec_return(&cluster_usage[cluster]))
+		return;
+
+	if (cluster < MAX_CLUSTERS)
+		return _put_cluster_clk_and_freq_table(cpu_dev);
+
+	for_each_present_cpu(i) {
+		struct device *cdev = get_cpu_device(i);
+		if (!cdev) {
+			pr_err("%s: failed to get cpu%d device\n", __func__, i);
+			return;
+		}
 
-	if (!atomic_dec_return(&cluster_usage[cluster])) {
-		clk_put(clk[cluster]);
-		dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table[cluster]);
-		dev_dbg(cpu_dev, "%s: cluster: %d\n", __func__, cluster);
+		_put_cluster_clk_and_freq_table(cdev);
 	}
+
+	/* free virtual table */
+	kfree(freq_table[cluster]);
 }
 
-static int get_cluster_clk_and_freq_table(struct device *cpu_dev)
+static int _get_cluster_clk_and_freq_table(struct device *cpu_dev)
 {
-	u32 cluster = cpu_to_cluster(cpu_dev->id);
+	u32 cluster = raw_cpu_to_cluster(cpu_dev->id);
 	char name[14] = "cpu-cluster.";
 	int ret;
 
-	if (atomic_inc_return(&cluster_usage[cluster]) != 1)
+	if (freq_table[cluster])
 		return 0;
 
 	ret = arm_bL_ops->init_opp_table(cpu_dev);
 	if (ret) {
 		dev_err(cpu_dev, "%s: init_opp_table failed, cpu: %d, err: %d\n",
 				__func__, cpu_dev->id, ret);
-		goto atomic_dec;
+		goto out;
 	}
 
 	ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table[cluster]);
 	if (ret) {
 		dev_err(cpu_dev, "%s: failed to init cpufreq table, cpu: %d, err: %d\n",
 				__func__, cpu_dev->id, ret);
-		goto atomic_dec;
+		goto out;
 	}
 
 	name[12] = cluster + '0';
@@ -125,13 +353,72 @@ static int get_cluster_clk_and_freq_table(struct device *cpu_dev)
 	ret = PTR_ERR(clk[cluster]);
 	dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table[cluster]);
 
-atomic_dec:
-	atomic_dec(&cluster_usage[cluster]);
+out:
 	dev_err(cpu_dev, "%s: Failed to get data for cluster: %d\n", __func__,
 			cluster);
 	return ret;
 }
 
+static int get_cluster_clk_and_freq_table(struct device *cpu_dev)
+{
+	u32 cluster = cpu_to_cluster(cpu_dev->id);
+	int i, ret;
+
+	if (atomic_inc_return(&cluster_usage[cluster]) != 1)
+		return 0;
+
+	if (cluster < MAX_CLUSTERS) {
+		ret = _get_cluster_clk_and_freq_table(cpu_dev);
+		if (ret)
+			atomic_dec(&cluster_usage[cluster]);
+		return ret;
+	}
+
+	/*
+	 * Get data for all clusters and fill virtual cluster with a merge of
+	 * both
+	 */
+	for_each_present_cpu(i) {
+		struct device *cdev = get_cpu_device(i);
+		if (!cdev) {
+			pr_err("%s: failed to get cpu%d device\n", __func__, i);
+			return -ENODEV;
+		}
+
+		ret = _get_cluster_clk_and_freq_table(cdev);
+		if (ret)
+			goto put_clusters;
+	}
+
+	ret = merge_cluster_tables();
+	if (ret)
+		goto put_clusters;
+
+	/* Assuming 2 cluster, set clk_big_min and clk_little_max */
+	clk_big_min = get_table_min(freq_table[0]);
+	clk_little_max = VIRT_FREQ(1, get_table_max(freq_table[1]));
+
+	pr_debug("%s: cluster: %d, clk_big_min: %d, clk_little_max: %d\n",
+			__func__, cluster, clk_big_min, clk_little_max);
+
+	return 0;
+
+put_clusters:
+	for_each_present_cpu(i) {
+		struct device *cdev = get_cpu_device(i);
+		if (!cdev) {
+			pr_err("%s: failed to get cpu%d device\n", __func__, i);
+			return -ENODEV;
+		}
+
+		_put_cluster_clk_and_freq_table(cdev);
+	}
+
+	atomic_dec(&cluster_usage[cluster]);
+
+	return ret;
+}
+
 /* Per-CPU initialization */
 static int bL_cpufreq_init(struct cpufreq_policy *policy)
 {
@@ -158,13 +445,23 @@ static int bL_cpufreq_init(struct cpufreq_policy *policy)
 		return ret;
 	}
 
+	if (cur_cluster < MAX_CLUSTERS) {
+		cpumask_copy(policy->cpus, topology_core_cpumask(policy->cpu));
+
+		per_cpu(physical_cluster, policy->cpu) = cur_cluster;
+	} else {
+		/* Assumption: during init, we are always running on A15 */
+		per_cpu(physical_cluster, policy->cpu) = A15_CLUSTER;
+	}
+
 	if (arm_bL_ops->get_transition_latency)
 		policy->cpuinfo.transition_latency =
 			arm_bL_ops->get_transition_latency(cpu_dev);
 	else
 		policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
 
-	cpumask_copy(policy->cpus, topology_core_cpumask(policy->cpu));
+	if (is_bL_switching_enabled())
+		per_cpu(cpu_last_req_freq, policy->cpu) = clk_get_cpu_rate(policy->cpu);
 
 	dev_info(cpu_dev, "%s: CPU %d initialized\n", __func__, policy->cpu);
 	return 0;
@@ -194,15 +491,47 @@ static struct cpufreq_driver bL_cpufreq_driver = {
 					CPUFREQ_HAVE_GOVERNOR_PER_POLICY,
 	.verify			= cpufreq_generic_frequency_table_verify,
 	.target_index		= bL_cpufreq_set_target,
-	.get			= bL_cpufreq_get,
+	.get			= bL_cpufreq_get_rate,
 	.init			= bL_cpufreq_init,
 	.exit			= bL_cpufreq_exit,
 	.attr			= cpufreq_generic_attr,
 };
 
+static int bL_cpufreq_switcher_notifier(struct notifier_block *nfb,
+					unsigned long action, void *_arg)
+{
+	pr_debug("%s: action: %ld\n", __func__, action);
+
+	switch (action) {
+	case BL_NOTIFY_PRE_ENABLE:
+	case BL_NOTIFY_PRE_DISABLE:
+		cpufreq_unregister_driver(&bL_cpufreq_driver);
+		break;
+
+	case BL_NOTIFY_POST_ENABLE:
+		set_switching_enabled(true);
+		cpufreq_register_driver(&bL_cpufreq_driver);
+		break;
+
+	case BL_NOTIFY_POST_DISABLE:
+		set_switching_enabled(false);
+		cpufreq_register_driver(&bL_cpufreq_driver);
+		break;
+
+	default:
+		return NOTIFY_DONE;
+	}
+
+	return NOTIFY_OK;
+}
+
+static struct notifier_block bL_switcher_notifier = {
+	.notifier_call = bL_cpufreq_switcher_notifier,
+};
+
 int bL_cpufreq_register(struct cpufreq_arm_bL_ops *ops)
 {
-	int ret;
+	int ret, i;
 
 	if (arm_bL_ops) {
 		pr_debug("%s: Already registered: %s, exiting\n", __func__,
@@ -217,16 +546,29 @@ int bL_cpufreq_register(struct cpufreq_arm_bL_ops *ops)
 
 	arm_bL_ops = ops;
 
+	ret = bL_switcher_get_enabled();
+	set_switching_enabled(ret);
+
+	for (i = 0; i < MAX_CLUSTERS; i++)
+		mutex_init(&cluster_lock[i]);
+
 	ret = cpufreq_register_driver(&bL_cpufreq_driver);
 	if (ret) {
 		pr_info("%s: Failed registering platform driver: %s, err: %d\n",
 				__func__, ops->name, ret);
 		arm_bL_ops = NULL;
 	} else {
-		pr_info("%s: Registered platform driver: %s\n", __func__,
-				ops->name);
+		ret = bL_switcher_register_notifier(&bL_switcher_notifier);
+		if (ret) {
+			cpufreq_unregister_driver(&bL_cpufreq_driver);
+			arm_bL_ops = NULL;
+		} else {
+			pr_info("%s: Registered platform driver: %s\n",
+					__func__, ops->name);
+		}
 	}
 
+	bL_switcher_put_enabled();
 	return ret;
 }
 EXPORT_SYMBOL_GPL(bL_cpufreq_register);
@@ -239,7 +581,10 @@ void bL_cpufreq_unregister(struct cpufreq_arm_bL_ops *ops)
 		return;
 	}
 
+	bL_switcher_get_enabled();
+	bL_switcher_unregister_notifier(&bL_switcher_notifier);
 	cpufreq_unregister_driver(&bL_cpufreq_driver);
+	bL_switcher_put_enabled();
 	pr_info("%s: Un-registered platform driver: %s\n", __func__,
 			arm_bL_ops->name);
 	arm_bL_ops = NULL;

drivers/cpufreq/arm_big_little.h

@@ -34,11 +34,6 @@ struct cpufreq_arm_bL_ops {
 	int (*init_opp_table)(struct device *cpu_dev);
 };
 
-static inline int cpu_to_cluster(int cpu)
-{
-	return topology_physical_package_id(cpu);
-}
-
 int bL_cpufreq_register(struct cpufreq_arm_bL_ops *ops);
 void bL_cpufreq_unregister(struct cpufreq_arm_bL_ops *ops);
 

drivers/cpufreq/at32ap-cpufreq.c

@@ -37,27 +37,23 @@ static unsigned long	loops_per_jiffy_ref;
 
 static int at32_set_target(struct cpufreq_policy *policy, unsigned int index)
 {
-	struct cpufreq_freqs freqs;
+	unsigned int old_freq, new_freq;
 
-	freqs.old = at32_get_speed(0);
-	freqs.new = freq_table[index].frequency;
+	old_freq = at32_get_speed(0);
+	new_freq = freq_table[index].frequency;
 
 	if (!ref_freq) {
-		ref_freq = freqs.old;
+		ref_freq = old_freq;
 		loops_per_jiffy_ref = boot_cpu_data.loops_per_jiffy;
 	}
 
-	cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
-	if (freqs.old < freqs.new)
+	if (old_freq < new_freq)
 		boot_cpu_data.loops_per_jiffy = cpufreq_scale(
-				loops_per_jiffy_ref, ref_freq, freqs.new);
-	clk_set_rate(cpuclk, freqs.new * 1000);
-	if (freqs.new < freqs.old)
+				loops_per_jiffy_ref, ref_freq, new_freq);
+	clk_set_rate(cpuclk, new_freq * 1000);
+	if (new_freq < old_freq)
 		boot_cpu_data.loops_per_jiffy = cpufreq_scale(
-				loops_per_jiffy_ref, ref_freq, freqs.new);
-	cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
-
-	pr_debug("cpufreq: set frequency %u Hz\n", freqs.new * 1000);
+				loops_per_jiffy_ref, ref_freq, new_freq);
 
 	return 0;
 }

drivers/cpufreq/blackfin-cpufreq.c

@@ -132,27 +132,23 @@ static int bfin_target(struct cpufreq_policy *policy, unsigned int index)
 #ifndef CONFIG_BF60x
 	unsigned int plldiv;
 #endif
-	struct cpufreq_freqs freqs;
 	static unsigned long lpj_ref;
 	static unsigned int  lpj_ref_freq;
+	unsigned int old_freq, new_freq;
 	int ret = 0;
 
 #if defined(CONFIG_CYCLES_CLOCKSOURCE)
 	cycles_t cycles;
 #endif
 
-	freqs.old = bfin_getfreq_khz(0);
-	freqs.new = bfin_freq_table[index].frequency;
+	old_freq = bfin_getfreq_khz(0);
+	new_freq = bfin_freq_table[index].frequency;
 
-	pr_debug("cpufreq: changing cclk to %lu; target = %u, oldfreq = %u\n",
-			freqs.new, freqs.new, freqs.old);
-
-	cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
 #ifndef CONFIG_BF60x
 	plldiv = (bfin_read_PLL_DIV() & SSEL) | dpm_state_table[index].csel;
 	bfin_write_PLL_DIV(plldiv);
 #else
-	ret = cpu_set_cclk(policy->cpu, freqs.new * 1000);
+	ret = cpu_set_cclk(policy->cpu, new_freq * 1000);
 	if (ret != 0) {
 		WARN_ONCE(ret, "cpufreq set freq failed %d\n", ret);
 		return ret;
@@ -168,17 +164,13 @@ static int bfin_target(struct cpufreq_policy *policy, unsigned int index)
 #endif
 	if (!lpj_ref_freq) {
 		lpj_ref = loops_per_jiffy;
-		lpj_ref_freq = freqs.old;
+		lpj_ref_freq = old_freq;
 	}
-	if (freqs.new != freqs.old) {
+	if (new_freq != old_freq) {
 		loops_per_jiffy = cpufreq_scale(lpj_ref,
-				lpj_ref_freq, freqs.new);
+				lpj_ref_freq, new_freq);
 	}
 
-	/* TODO: just test case for cycles clock source, remove later */
-	cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
-
-	pr_debug("cpufreq: done\n");
 	return ret;
 }
 

drivers/cpufreq/cpufreq-cpu0.c

@@ -37,20 +37,19 @@ static unsigned int cpu0_get_speed(unsigned int cpu)
 
 static int cpu0_set_target(struct cpufreq_policy *policy, unsigned int index)
 {
-	struct cpufreq_freqs freqs;
 	struct dev_pm_opp *opp;
 	unsigned long volt = 0, volt_old = 0, tol = 0;
+	unsigned int old_freq, new_freq;
 	long freq_Hz, freq_exact;
 	int ret;
 
 	freq_Hz = clk_round_rate(cpu_clk, freq_table[index].frequency * 1000);
 	if (freq_Hz < 0)
 		freq_Hz = freq_table[index].frequency * 1000;
-	freq_exact = freq_Hz;
-	freqs.new = freq_Hz / 1000;
-	freqs.old = clk_get_rate(cpu_clk) / 1000;
 
-	cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
+	freq_exact = freq_Hz;
+	new_freq = freq_Hz / 1000;
+	old_freq = clk_get_rate(cpu_clk) / 1000;
 
 	if (!IS_ERR(cpu_reg)) {
 		rcu_read_lock();
@@ -58,9 +57,7 @@ static int cpu0_set_target(struct cpufreq_policy *policy, unsigned int index)
 		if (IS_ERR(opp)) {
 			rcu_read_unlock();
 			pr_err("failed to find OPP for %ld\n", freq_Hz);
-			freqs.new = freqs.old;
-			ret = PTR_ERR(opp);
-			goto post_notify;
+			return PTR_ERR(opp);
 		}
 		volt = dev_pm_opp_get_voltage(opp);
 		rcu_read_unlock();
@@ -69,16 +66,15 @@ static int cpu0_set_target(struct cpufreq_policy *policy, unsigned int index)
 	}
 
 	pr_debug("%u MHz, %ld mV --> %u MHz, %ld mV\n",
-		 freqs.old / 1000, volt_old ? volt_old / 1000 : -1,
-		 freqs.new / 1000, volt ? volt / 1000 : -1);
+		 old_freq / 1000, volt_old ? volt_old / 1000 : -1,
+		 new_freq / 1000, volt ? volt / 1000 : -1);
 
 	/* scaling up?  scale voltage before frequency */
-	if (!IS_ERR(cpu_reg) && freqs.new > freqs.old) {
+	if (!IS_ERR(cpu_reg) && new_freq > old_freq) {
 		ret = regulator_set_voltage_tol(cpu_reg, volt, tol);
 		if (ret) {
 			pr_err("failed to scale voltage up: %d\n", ret);
-			freqs.new = freqs.old;
-			goto post_notify;
+			return ret;
 		}
 	}
 
@@ -87,23 +83,18 @@ static int cpu0_set_target(struct cpufreq_policy *policy, unsigned int index)
 		pr_err("failed to set clock rate: %d\n", ret);
 		if (!IS_ERR(cpu_reg))
 			regulator_set_voltage_tol(cpu_reg, volt_old, tol);
-		freqs.new = freqs.old;
-		goto post_notify;
+		return ret;
 	}
 
 	/* scaling down?  scale voltage after frequency */
-	if (!IS_ERR(cpu_reg) && freqs.new < freqs.old) {
+	if (!IS_ERR(cpu_reg) && new_freq < old_freq) {
 		ret = regulator_set_voltage_tol(cpu_reg, volt, tol);
 		if (ret) {
 			pr_err("failed to scale voltage down: %d\n", ret);
-			clk_set_rate(cpu_clk, freqs.old * 1000);
-			freqs.new = freqs.old;
+			clk_set_rate(cpu_clk, old_freq * 1000);
 		}
 	}
 
-post_notify:
-	cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
-
 	return ret;
 }
 

drivers/cpufreq/cpufreq.c

@@ -1669,6 +1669,8 @@ int __cpufreq_driver_target(struct cpufreq_policy *policy,
 		retval = cpufreq_driver->target(policy, target_freq, relation);
 	else if (cpufreq_driver->target_index) {
 		struct cpufreq_frequency_table *freq_table;
+		struct cpufreq_freqs freqs;
+		bool notify;
 		int index;
 
 		freq_table = cpufreq_frequency_get_table(policy->cpu);
@@ -1684,10 +1686,42 @@ int __cpufreq_driver_target(struct cpufreq_policy *policy,
 			goto out;
 		}
 
-		if (freq_table[index].frequency == policy->cur)
+		if (freq_table[index].frequency == policy->cur) {
 			retval = 0;
-		else
-			retval = cpufreq_driver->target_index(policy, index);
+			goto out;
+		}
+
+		notify = !(cpufreq_driver->flags & CPUFREQ_ASYNC_NOTIFICATION);
+
+		if (notify) {
+			freqs.old = policy->cur;
+			freqs.new = freq_table[index].frequency;
+			freqs.flags = 0;
+
+			pr_debug("%s: cpu: %d, oldfreq: %u, new freq: %u\n",
+					__func__, policy->cpu, freqs.old,
+					freqs.new);
+
+			cpufreq_notify_transition(policy, &freqs,
+					CPUFREQ_PRECHANGE);
+		}
+
+		retval = cpufreq_driver->target_index(policy, index);
+		if (retval)
+			pr_err("%s: Failed to change cpu frequency: %d\n",
+					__func__, retval);
+
+		if (notify) {
+			/*
+			 * Notify with old freq in case we failed to change
+			 * frequency
+			 */
+			if (retval)
+				freqs.new = freqs.old;
+
+			cpufreq_notify_transition(policy, &freqs,
+					CPUFREQ_POSTCHANGE);
+		}
 	}
 
 out:

drivers/cpufreq/cpufreq_ondemand.c

@@ -168,7 +168,6 @@ static void od_check_cpu(int cpu, unsigned int load)
 			dbs_info->rate_mult =
 				od_tuners->sampling_down_factor;
 		dbs_freq_increase(policy, policy->max);
-		return;
 	} else {
 		/* Calculate the next frequency proportional to load */
 		unsigned int freq_next;

drivers/cpufreq/cris-artpec3-cpufreq.c

@@ -29,15 +29,9 @@ static unsigned int cris_freq_get_cpu_frequency(unsigned int cpu)
 
 static int cris_freq_target(struct cpufreq_policy *policy, unsigned int state)
 {
-	struct cpufreq_freqs freqs;
 	reg_clkgen_rw_clk_ctrl clk_ctrl;
 	clk_ctrl = REG_RD(clkgen, regi_clkgen, rw_clk_ctrl);
 
-	freqs.old = cris_freq_get_cpu_frequency(policy->cpu);
-	freqs.new = cris_freq_table[state].frequency;
-
-	cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
-
 	local_irq_disable();
 
 	/* Even though we may be SMP they will share the same clock
@@ -50,8 +44,6 @@ static int cris_freq_target(struct cpufreq_policy *policy, unsigned int state)
 
 	local_irq_enable();
 
-	cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
-
 	return 0;
 }
 

drivers/cpufreq/cris-etraxfs-cpufreq.c

@@ -29,15 +29,9 @@ static unsigned int cris_freq_get_cpu_frequency(unsigned int cpu)
 
 static int cris_freq_target(struct cpufreq_policy *policy, unsigned int state)
 {
-	struct cpufreq_freqs freqs;
 	reg_config_rw_clk_ctrl clk_ctrl;
 	clk_ctrl = REG_RD(config, regi_config, rw_clk_ctrl);
 
-	freqs.old = cris_freq_get_cpu_frequency(policy->cpu);
-	freqs.new = cris_freq_table[state].frequency;
-
-	cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
-
 	local_irq_disable();
 
 	/* Even though we may be SMP they will share the same clock
@@ -50,8 +44,6 @@ static int cris_freq_target(struct cpufreq_policy *policy, unsigned int state)
 
 	local_irq_enable();
 
-	cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
-
 	return 0;
 }
 

drivers/cpufreq/davinci-cpufreq.c

@@ -68,46 +68,36 @@ static unsigned int davinci_getspeed(unsigned int cpu)
 
 static int davinci_target(struct cpufreq_policy *policy, unsigned int idx)
 {
-	int ret = 0;
-	struct cpufreq_freqs freqs;
 	struct davinci_cpufreq_config *pdata = cpufreq.dev->platform_data;
 	struct clk *armclk = cpufreq.armclk;
+	unsigned int old_freq, new_freq;
+	int ret = 0;
 
-	freqs.old = davinci_getspeed(0);
-	freqs.new = pdata->freq_table[idx].frequency;
-
-	dev_dbg(cpufreq.dev, "transition: %u --> %u\n", freqs.old, freqs.new);
-
-	cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
+	old_freq = davinci_getspeed(0);
+	new_freq = pdata->freq_table[idx].frequency;
 
 	/* if moving to higher frequency, up the voltage beforehand */
-	if (pdata->set_voltage && freqs.new > freqs.old) {
+	if (pdata->set_voltage && new_freq > old_freq) {
 		ret = pdata->set_voltage(idx);
 		if (ret)
-			goto out;
+			return ret;
 	}
 
 	ret = clk_set_rate(armclk, idx);
 	if (ret)
-		goto out;
+		return ret;
 
 	if (cpufreq.asyncclk) {
 		ret = clk_set_rate(cpufreq.asyncclk, cpufreq.asyncrate);
 		if (ret)
-			goto out;
+			return ret;
 	}
 
 	/* if moving to lower freq, lower the voltage after lowering freq */
-	if (pdata->set_voltage && freqs.new < freqs.old)
+	if (pdata->set_voltage && new_freq < old_freq)
 		pdata->set_voltage(idx);
 
-out:
-	if (ret)
-		freqs.new = freqs.old;
-
-	cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
-
-	return ret;
+	return 0;
 }
 
 static int davinci_cpu_init(struct cpufreq_policy *policy)

drivers/cpufreq/dbx500-cpufreq.c

@@ -22,28 +22,8 @@ static struct clk *armss_clk;
 static int dbx500_cpufreq_target(struct cpufreq_policy *policy,
 				unsigned int index)
 {
-	struct cpufreq_freqs freqs;
-	int ret;
-
-	freqs.old = policy->cur;
-	freqs.new = freq_table[index].frequency;
-
-	/* pre-change notification */
-	cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
-
 	/* update armss clk frequency */
-	ret = clk_set_rate(armss_clk, freqs.new * 1000);
-
-	if (ret) {
-		pr_err("dbx500-cpufreq: Failed to set armss_clk to %d Hz: error %d\n",
-		       freqs.new * 1000, ret);
-		freqs.new = freqs.old;
-	}
-
-	/* post change notification */
-	cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
-
-	return ret;
+	return clk_set_rate(armss_clk, freq_table[index].frequency * 1000);
 }
 
 static unsigned int dbx500_cpufreq_getspeed(unsigned int cpu)

drivers/cpufreq/e_powersaver.c

@@ -107,15 +107,9 @@ static int eps_set_state(struct eps_cpu_data *centaur,
 			 struct cpufreq_policy *policy,
 			 u32 dest_state)
 {
-	struct cpufreq_freqs freqs;
 	u32 lo, hi;
-	int err = 0;
 	int i;
 
-	freqs.old = eps_get(policy->cpu);
-	freqs.new = centaur->fsb * ((dest_state >> 8) & 0xff);
-	cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
-
 	/* Wait while CPU is busy */
 	rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
 	i = 0;
@@ -124,8 +118,7 @@ static int eps_set_state(struct eps_cpu_data *centaur,
 		rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
 		i++;
 		if (unlikely(i > 64)) {
-			err = -ENODEV;
-			goto postchange;
+			return -ENODEV;
 		}
 	}
 	/* Set new multiplier and voltage */
@@ -137,16 +130,10 @@ static int eps_set_state(struct eps_cpu_data *centaur,
 		rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
 		i++;
 		if (unlikely(i > 64)) {
-			err = -ENODEV;
-			goto postchange;
+			return -ENODEV;
 		}
 	} while (lo & ((1 << 16) | (1 << 17)));
 
-	/* Return current frequency */
-postchange:
-	rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
-	freqs.new = centaur->fsb * ((lo >> 8) & 0xff);
-
 #ifdef DEBUG
 	{
 	u8 current_multiplier, current_voltage;
@@ -161,11 +148,7 @@ postchange:
 		current_multiplier);
 	}
 #endif
-	if (err)
-		freqs.new = freqs.old;
-
-	cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
-	return err;
+	return 0;
 }
 
 static int eps_target(struct cpufreq_policy *policy, unsigned int index)

drivers/cpufreq/elanfreq.c

@@ -108,17 +108,6 @@ static unsigned int elanfreq_get_cpu_frequency(unsigned int cpu)
 static int elanfreq_target(struct cpufreq_policy *policy,
 			    unsigned int state)
 {
-	struct cpufreq_freqs    freqs;
-
-	freqs.old = elanfreq_get_cpu_frequency(0);
-	freqs.new = elan_multiplier[state].clock;
-
-	cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
-
-	printk(KERN_INFO "elanfreq: attempting to set frequency to %i kHz\n",
-			elan_multiplier[state].clock);
-
-
 	/*
 	 * Access to the Elan's internal registers is indexed via
 	 * 0x22: Chip Setup & Control Register Index Register (CSCI)
@@ -149,8 +138,6 @@ static int elanfreq_target(struct cpufreq_policy *policy,
 	udelay(10000);
 	local_irq_enable();
 
-	cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
-
 	return 0;
 }
 /*

drivers/cpufreq/exynos-cpufreq.c

@@ -25,7 +25,6 @@
 static struct exynos_dvfs_info *exynos_info;
 
 static struct regulator *arm_regulator;
-static struct cpufreq_freqs freqs;
 
 static unsigned int locking_frequency;
 static bool frequency_locked;
@@ -59,18 +58,18 @@ static int exynos_cpufreq_scale(unsigned int target_freq)
 	struct cpufreq_policy *policy = cpufreq_cpu_get(0);
 	unsigned int arm_volt, safe_arm_volt = 0;
 	unsigned int mpll_freq_khz = exynos_info->mpll_freq_khz;
+	unsigned int old_freq;
 	int index, old_index;
 	int ret = 0;
 
-	freqs.old = policy->cur;
-	freqs.new = target_freq;
+	old_freq = policy->cur;
 
 	/*
 	 * The policy max have been changed so that we cannot get proper
 	 * old_index with cpufreq_frequency_table_target(). Thus, ignore
 	 * policy and get the index from the raw freqeuncy table.
 	 */
-	old_index = exynos_cpufreq_get_index(freqs.old);
+	old_index = exynos_cpufreq_get_index(old_freq);
 	if (old_index < 0) {
 		ret = old_index;
 		goto out;
@@ -95,17 +94,14 @@ static int exynos_cpufreq_scale(unsigned int target_freq)
 	}
 	arm_volt = volt_table[index];
 
-	cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
-
 	/* When the new frequency is higher than current frequency */
-	if ((freqs.new > freqs.old) && !safe_arm_volt) {
+	if ((target_freq > old_freq) && !safe_arm_volt) {
 		/* Firstly, voltage up to increase frequency */
 		ret = regulator_set_voltage(arm_regulator, arm_volt, arm_volt);
 		if (ret) {
 			pr_err("%s: failed to set cpu voltage to %d\n",
 				__func__, arm_volt);
-			freqs.new = freqs.old;
-			goto post_notify;
+			return ret;
 		}
 	}
 
@@ -115,22 +111,15 @@ static int exynos_cpufreq_scale(unsigned int target_freq)
 		if (ret) {
 			pr_err("%s: failed to set cpu voltage to %d\n",
 				__func__, safe_arm_volt);
-			freqs.new = freqs.old;
-			goto post_notify;
+			return ret;
 		}
 	}
 
 	exynos_info->set_freq(old_index, index);
 
-post_notify:
-	cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
-
-	if (ret)
-		goto out;
-
 	/* When the new frequency is lower than current frequency */
-	if ((freqs.new < freqs.old) ||
-	   ((freqs.new > freqs.old) && safe_arm_volt)) {
+	if ((target_freq < old_freq) ||
+	   ((target_freq > old_freq) && safe_arm_volt)) {
 		/* down the voltage after frequency change */
 		ret = regulator_set_voltage(arm_regulator, arm_volt,
 				arm_volt);
@@ -142,7 +131,6 @@ post_notify:
 	}
 
 out:
-
 	cpufreq_cpu_put(policy);
 
 	return ret;

drivers/cpufreq/exynos5440-cpufreq.c

@@ -312,7 +312,7 @@ static int exynos_cpufreq_cpu_init(struct cpufreq_policy *policy)
 }
 
 static struct cpufreq_driver exynos_driver = {
-	.flags		= CPUFREQ_STICKY,
+	.flags		= CPUFREQ_STICKY | CPUFREQ_ASYNC_NOTIFICATION,
 	.verify		= cpufreq_generic_frequency_table_verify,
 	.target_index	= exynos_target,
 	.get		= exynos_getspeed,

drivers/cpufreq/ia64-acpi-cpufreq.c

@@ -141,7 +141,6 @@ processor_set_freq (
 {
 	int			ret = 0;
 	u32			value = 0;
-	struct cpufreq_freqs    cpufreq_freqs;
 	cpumask_t		saved_mask;
 	int			retval;
 
@@ -168,13 +167,6 @@ processor_set_freq (
 	pr_debug("Transitioning from P%d to P%d\n",
 		data->acpi_data.state, state);
 
-	/* cpufreq frequency struct */
-	cpufreq_freqs.old = data->freq_table[data->acpi_data.state].frequency;
-	cpufreq_freqs.new = data->freq_table[state].frequency;
-
-	/* notify cpufreq */
-	cpufreq_notify_transition(policy, &cpufreq_freqs, CPUFREQ_PRECHANGE);
-
 	/*
 	 * First we write the target state's 'control' value to the
 	 * control_register.
@@ -186,22 +178,11 @@ processor_set_freq (
 
 	ret = processor_set_pstate(value);
 	if (ret) {
-		unsigned int tmp = cpufreq_freqs.new;
-		cpufreq_notify_transition(policy, &cpufreq_freqs,
-				CPUFREQ_POSTCHANGE);
-		cpufreq_freqs.new = cpufreq_freqs.old;
-		cpufreq_freqs.old = tmp;
-		cpufreq_notify_transition(policy, &cpufreq_freqs,
-				CPUFREQ_PRECHANGE);
-		cpufreq_notify_transition(policy, &cpufreq_freqs,
-				CPUFREQ_POSTCHANGE);
 		printk(KERN_WARNING "Transition failed with error %d\n", ret);
 		retval = -ENODEV;
 		goto migrate_end;
 	}
 
-	cpufreq_notify_transition(policy, &cpufreq_freqs, CPUFREQ_POSTCHANGE);
-
 	data->acpi_data.state = state;
 
 	retval = 0;

drivers/cpufreq/imx6q-cpufreq.c

@@ -42,14 +42,14 @@ static unsigned int imx6q_get_speed(unsigned int cpu)
 
 static int imx6q_set_target(struct cpufreq_policy *policy, unsigned int index)
 {
-	struct cpufreq_freqs freqs;
 	struct dev_pm_opp *opp;
 	unsigned long freq_hz, volt, volt_old;
+	unsigned int old_freq, new_freq;
 	int ret;
 
-	freqs.new = freq_table[index].frequency;
-	freq_hz = freqs.new * 1000;
-	freqs.old = clk_get_rate(arm_clk) / 1000;
+	new_freq = freq_table[index].frequency;
+	freq_hz = new_freq * 1000;
+	old_freq = clk_get_rate(arm_clk) / 1000;
 
 	rcu_read_lock();
 	opp = dev_pm_opp_find_freq_ceil(cpu_dev, &freq_hz);
@@ -64,26 +64,23 @@ static int imx6q_set_target(struct cpufreq_policy *policy, unsigned int index)
 	volt_old = regulator_get_voltage(arm_reg);
 
 	dev_dbg(cpu_dev, "%u MHz, %ld mV --> %u MHz, %ld mV\n",
-		freqs.old / 1000, volt_old / 1000,
-		freqs.new / 1000, volt / 1000);
-
-	cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
+		old_freq / 1000, volt_old / 1000,
+		new_freq / 1000, volt / 1000);
 
 	/* scaling up?  scale voltage before frequency */
-	if (freqs.new > freqs.old) {
+	if (new_freq > old_freq) {
 		ret = regulator_set_voltage_tol(arm_reg, volt, 0);
 		if (ret) {
 			dev_err(cpu_dev,
 				"failed to scale vddarm up: %d\n", ret);
-			freqs.new = freqs.old;
-			goto post_notify;
+			return ret;
 		}
 
 		/*
 		 * Need to increase vddpu and vddsoc for safety
 		 * if we are about to run at 1.2 GHz.
 		 */
-		if (freqs.new == FREQ_1P2_GHZ / 1000) {
+		if (new_freq == FREQ_1P2_GHZ / 1000) {
 			regulator_set_voltage_tol(pu_reg,
 					PU_SOC_VOLTAGE_HIGH, 0);
 			regulator_set_voltage_tol(soc_reg,
@@ -103,21 +100,20 @@ static int imx6q_set_target(struct cpufreq_policy *policy, unsigned int index)
 	clk_set_parent(step_clk, pll2_pfd2_396m_clk);
 	clk_set_parent(pll1_sw_clk, step_clk);
 	if (freq_hz > clk_get_rate(pll2_pfd2_396m_clk)) {
-		clk_set_rate(pll1_sys_clk, freqs.new * 1000);
+		clk_set_rate(pll1_sys_clk, new_freq * 1000);
 		clk_set_parent(pll1_sw_clk, pll1_sys_clk);
 	}
 
 	/* Ensure the arm clock divider is what we expect */
-	ret = clk_set_rate(arm_clk, freqs.new * 1000);
+	ret = clk_set_rate(arm_clk, new_freq * 1000);
 	if (ret) {
 		dev_err(cpu_dev, "failed to set clock rate: %d\n", ret);
 		regulator_set_voltage_tol(arm_reg, volt_old, 0);
-		freqs.new = freqs.old;
-		goto post_notify;
+		return ret;
 	}
 
 	/* scaling down?  scale voltage after frequency */
-	if (freqs.new < freqs.old) {
+	if (new_freq < old_freq) {
 		ret = regulator_set_voltage_tol(arm_reg, volt, 0);
 		if (ret) {
 			dev_warn(cpu_dev,
@@ -125,7 +121,7 @@ static int imx6q_set_target(struct cpufreq_policy *policy, unsigned int index)
 			ret = 0;
 		}
 
-		if (freqs.old == FREQ_1P2_GHZ / 1000) {
+		if (old_freq == FREQ_1P2_GHZ / 1000) {
 			regulator_set_voltage_tol(pu_reg,
 					PU_SOC_VOLTAGE_NORMAL, 0);
 			regulator_set_voltage_tol(soc_reg,
@@ -133,10 +129,7 @@ static int imx6q_set_target(struct cpufreq_policy *policy, unsigned int index)
 		}
 	}
 
-post_notify:
-	cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
-
-	return ret;
+	return 0;
 }
 
 static int imx6q_cpufreq_init(struct cpufreq_policy *policy)

drivers/cpufreq/intel_pstate.c

@@ -25,6 +25,7 @@
 #include <linux/types.h>
 #include <linux/fs.h>
 #include <linux/debugfs.h>
+#include <linux/acpi.h>
 #include <trace/events/power.h>
 
 #include <asm/div64.h>
@@ -759,7 +760,7 @@ static int intel_pstate_msrs_not_valid(void)
 	return 0;
 }
 
-void copy_pid_params(struct pstate_adjust_policy *policy)
+static void copy_pid_params(struct pstate_adjust_policy *policy)
 {
 	pid_params.sample_rate_ms = policy->sample_rate_ms;
 	pid_params.p_gain_pct = policy->p_gain_pct;
@@ -769,7 +770,7 @@ void copy_pid_params(struct pstate_adjust_policy *policy)
 	pid_params.setpoint = policy->setpoint;
 }
 
-void copy_cpu_funcs(struct pstate_funcs *funcs)
+static void copy_cpu_funcs(struct pstate_funcs *funcs)
 {
 	pstate_funcs.get_max   = funcs->get_max;
 	pstate_funcs.get_min   = funcs->get_min;
@@ -777,6 +778,72 @@ void copy_cpu_funcs(struct pstate_funcs *funcs)
 	pstate_funcs.set       = funcs->set;
 }
 
+#if IS_ENABLED(CONFIG_ACPI)
+#include <acpi/processor.h>
+
+static bool intel_pstate_no_acpi_pss(void)
+{
+	int i;
+
+	for_each_possible_cpu(i) {
+		acpi_status status;
+		union acpi_object *pss;
+		struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
+		struct acpi_processor *pr = per_cpu(processors, i);
+
+		if (!pr)
+			continue;
+
+		status = acpi_evaluate_object(pr->handle, "_PSS", NULL, &buffer);
+		if (ACPI_FAILURE(status))
+			continue;
+
+		pss = buffer.pointer;
+		if (pss && pss->type == ACPI_TYPE_PACKAGE) {
+			kfree(pss);
+			return false;
+		}
+
+		kfree(pss);
+	}
+
+	return true;
+}
+
+struct hw_vendor_info {
+	u16  valid;
+	char oem_id[ACPI_OEM_ID_SIZE];
+	char oem_table_id[ACPI_OEM_TABLE_ID_SIZE];
+};
+
+/* Hardware vendor-specific info that has its own power management modes */
+static struct hw_vendor_info vendor_info[] = {
+	{1, "HP    ", "ProLiant"},
+	{0, "", ""},
+};
+
+static bool intel_pstate_platform_pwr_mgmt_exists(void)
+{
+	struct acpi_table_header hdr;
+	struct hw_vendor_info *v_info;
+
+	if (acpi_disabled
+	    || ACPI_FAILURE(acpi_get_table_header(ACPI_SIG_FADT, 0, &hdr)))
+		return false;
+
+	for (v_info = vendor_info; v_info->valid; v_info++) {
+		if (!strncmp(hdr.oem_id, v_info->oem_id, ACPI_OEM_ID_SIZE)
+		    && !strncmp(hdr.oem_table_id, v_info->oem_table_id, ACPI_OEM_TABLE_ID_SIZE)
+		    && intel_pstate_no_acpi_pss())
+			return true;
+	}
+
+	return false;
+}
+#else /* CONFIG_ACPI not enabled */
+static inline bool intel_pstate_platform_pwr_mgmt_exists(void) { return false; }
+#endif /* CONFIG_ACPI */
+
 static int __init intel_pstate_init(void)
 {
 	int cpu, rc = 0;
@@ -790,6 +857,13 @@ static int __init intel_pstate_init(void)
 	if (!id)
 		return -ENODEV;
 
+	/*
+	 * The Intel pstate driver will be ignored if the platform
+	 * firmware has its own power management modes.
+	 */
+	if (intel_pstate_platform_pwr_mgmt_exists())
+		return -ENODEV;
+
 	cpu_info = (struct cpu_defaults *)id->driver_data;
 
 	copy_pid_params(&cpu_info->pid_policy);

drivers/cpufreq/kirkwood-cpufreq.c

@@ -58,48 +58,34 @@ static unsigned int kirkwood_cpufreq_get_cpu_frequency(unsigned int cpu)
 static int kirkwood_cpufreq_target(struct cpufreq_policy *policy,
 			    unsigned int index)
 {
-	struct cpufreq_freqs freqs;
 	unsigned int state = kirkwood_freq_table[index].driver_data;
 	unsigned long reg;
 
-	freqs.old = kirkwood_cpufreq_get_cpu_frequency(0);
-	freqs.new = kirkwood_freq_table[index].frequency;
+	local_irq_disable();
 
-	cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
+	/* Disable interrupts to the CPU */
+	reg = readl_relaxed(priv.base);
+	reg |= CPU_SW_INT_BLK;
+	writel_relaxed(reg, priv.base);
 
-	dev_dbg(priv.dev, "Attempting to set frequency to %i KHz\n",
-		kirkwood_freq_table[index].frequency);
-	dev_dbg(priv.dev, "old frequency was %i KHz\n",
-		kirkwood_cpufreq_get_cpu_frequency(0));
-
-	if (freqs.old != freqs.new) {
-		local_irq_disable();
-
-		/* Disable interrupts to the CPU */
-		reg = readl_relaxed(priv.base);
-		reg |= CPU_SW_INT_BLK;
-		writel_relaxed(reg, priv.base);
-
-		switch (state) {
-		case STATE_CPU_FREQ:
-			clk_disable(priv.powersave_clk);
-			break;
-		case STATE_DDR_FREQ:
-			clk_enable(priv.powersave_clk);
-			break;
-		}
+	switch (state) {
+	case STATE_CPU_FREQ:
+		clk_disable(priv.powersave_clk);
+		break;
+	case STATE_DDR_FREQ:
+		clk_enable(priv.powersave_clk);
+		break;
+	}
 
-		/* Wait-for-Interrupt, while the hardware changes frequency */
-		cpu_do_idle();
+	/* Wait-for-Interrupt, while the hardware changes frequency */
+	cpu_do_idle();
 
-		/* Enable interrupts to the CPU */
-		reg = readl_relaxed(priv.base);
-		reg &= ~CPU_SW_INT_BLK;
-		writel_relaxed(reg, priv.base);
+	/* Enable interrupts to the CPU */
+	reg = readl_relaxed(priv.base);
+	reg &= ~CPU_SW_INT_BLK;
+	writel_relaxed(reg, priv.base);
 
-		local_irq_enable();
-	}
-	cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
+	local_irq_enable();
 
 	return 0;
 }

drivers/cpufreq/loongson2_cpufreq.c

@@ -57,7 +57,6 @@ static int loongson2_cpufreq_target(struct cpufreq_policy *policy,
 {
 	unsigned int cpu = policy->cpu;
 	cpumask_t cpus_allowed;
-	struct cpufreq_freqs freqs;
 	unsigned int freq;
 
 	cpus_allowed = current->cpus_allowed;
@@ -67,26 +66,11 @@ static int loongson2_cpufreq_target(struct cpufreq_policy *policy,
 	    ((cpu_clock_freq / 1000) *
 	     loongson2_clockmod_table[index].driver_data) / 8;
 
-	pr_debug("cpufreq: requested frequency %u Hz\n",
-			loongson2_clockmod_table[index].frequency * 1000);
-
-	freqs.old = loongson2_cpufreq_get(cpu);
-	freqs.new = freq;
-	freqs.flags = 0;
-
-	/* notifiers */
-	cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
-
 	set_cpus_allowed_ptr(current, &cpus_allowed);
 
 	/* setting the cpu frequency */
 	clk_set_rate(cpuclk, freq);
 
-	/* notifiers */
-	cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
-
-	pr_debug("cpufreq: set frequency %u kHz\n", freq);
-
 	return 0;
 }
 

drivers/cpufreq/maple-cpufreq.c

@@ -69,8 +69,6 @@ static struct cpufreq_frequency_table maple_cpu_freqs[] = {
  */
 static int maple_pmode_cur;
 
-static DEFINE_MUTEX(maple_switch_mutex);
-
 static const u32 *maple_pmode_data;
 static int maple_pmode_max;
 
@@ -133,21 +131,7 @@ static int maple_scom_query_freq(void)
 static int maple_cpufreq_target(struct cpufreq_policy *policy,
 	unsigned int index)
 {
-	struct cpufreq_freqs freqs;
-	int rc;
-
-	mutex_lock(&maple_switch_mutex);
-
-	freqs.old = maple_cpu_freqs[maple_pmode_cur].frequency;
-	freqs.new = maple_cpu_freqs[index].frequency;
-
-	cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
-	rc = maple_scom_switch_freq(index);
-	cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
-
-	mutex_unlock(&maple_switch_mutex);
-
-	return rc;
+	return maple_scom_switch_freq(index);
 }
 
 static unsigned int maple_cpufreq_get_speed(unsigned int cpu)

drivers/cpufreq/omap-cpufreq.c

@@ -53,15 +53,14 @@ static unsigned int omap_getspeed(unsigned int cpu)
 
 static int omap_target(struct cpufreq_policy *policy, unsigned int index)
 {
-	int r, ret = 0;
-	struct cpufreq_freqs freqs;
 	struct dev_pm_opp *opp;
 	unsigned long freq, volt = 0, volt_old = 0, tol = 0;
+	unsigned int old_freq, new_freq;
 
-	freqs.old = omap_getspeed(policy->cpu);
-	freqs.new = freq_table[index].frequency;
+	old_freq = omap_getspeed(policy->cpu);
+	new_freq = freq_table[index].frequency;
 
-	freq = freqs.new * 1000;
+	freq = new_freq * 1000;
 	ret = clk_round_rate(mpu_clk, freq);
 	if (IS_ERR_VALUE(ret)) {
 		dev_warn(mpu_dev,
@@ -77,7 +76,7 @@ static int omap_target(struct cpufreq_policy *policy, unsigned int index)
 		if (IS_ERR(opp)) {
 			rcu_read_unlock();
 			dev_err(mpu_dev, "%s: unable to find MPU OPP for %d\n",
-				__func__, freqs.new);
+				__func__, new_freq);
 			return -EINVAL;
 		}
 		volt = dev_pm_opp_get_voltage(opp);
@@ -87,43 +86,32 @@ static int omap_target(struct cpufreq_policy *policy, unsigned int index)
 	}
 
 	dev_dbg(mpu_dev, "cpufreq-omap: %u MHz, %ld mV --> %u MHz, %ld mV\n", 
-		freqs.old / 1000, volt_old ? volt_old / 1000 : -1,
-		freqs.new / 1000, volt ? volt / 1000 : -1);
-
-	/* notifiers */
-	cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
+		old_freq / 1000, volt_old ? volt_old / 1000 : -1,
+		new_freq / 1000, volt ? volt / 1000 : -1);
 
 	/* scaling up?  scale voltage before frequency */
-	if (mpu_reg && (freqs.new > freqs.old)) {
+	if (mpu_reg && (new_freq > old_freq)) {
 		r = regulator_set_voltage(mpu_reg, volt - tol, volt + tol);
 		if (r < 0) {
 			dev_warn(mpu_dev, "%s: unable to scale voltage up.\n",
 				 __func__);
-			freqs.new = freqs.old;
-			goto done;
+			return r;
 		}
 	}
 
-	ret = clk_set_rate(mpu_clk, freqs.new * 1000);
+	ret = clk_set_rate(mpu_clk, new_freq * 1000);
 
 	/* scaling down?  scale voltage after frequency */
-	if (mpu_reg && (freqs.new < freqs.old)) {
+	if (mpu_reg && (new_freq < old_freq)) {
 		r = regulator_set_voltage(mpu_reg, volt - tol, volt + tol);
 		if (r < 0) {
 			dev_warn(mpu_dev, "%s: unable to scale voltage down.\n",
 				 __func__);
-			ret = clk_set_rate(mpu_clk, freqs.old * 1000);
-			freqs.new = freqs.old;
-			goto done;
+			clk_set_rate(mpu_clk, old_freq * 1000);
+			return r;
 		}
 	}
 
-	freqs.new = omap_getspeed(policy->cpu);
-
-done:
-	/* notifiers */
-	cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
-
 	return ret;
 }
 

drivers/cpufreq/p4-clockmod.c

@@ -107,15 +107,8 @@ static struct cpufreq_frequency_table p4clockmod_table[] = {
 
 static int cpufreq_p4_target(struct cpufreq_policy *policy, unsigned int index)
 {
-	struct cpufreq_freqs freqs;
 	int i;
 
-	freqs.old = cpufreq_p4_get(policy->cpu);
-	freqs.new = stock_freq * p4clockmod_table[index].driver_data / 8;
-
-	/* notifiers */
-	cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
-
 	/* run on each logical CPU,
 	 * see section 13.15.3 of IA32 Intel Architecture Software
 	 * Developer's Manual, Volume 3
@@ -123,9 +116,6 @@ static int cpufreq_p4_target(struct cpufreq_policy *policy, unsigned int index)
 	for_each_cpu(i, policy->cpus)
 		cpufreq_p4_setdc(i, p4clockmod_table[index].driver_data);
 
-	/* notifiers */
-	cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
-
 	return 0;
 }
 

drivers/cpufreq/pasemi-cpufreq.c

@@ -51,8 +51,6 @@
 static void __iomem *sdcpwr_mapbase;
 static void __iomem *sdcasr_mapbase;
 
-static DEFINE_MUTEX(pas_switch_mutex);
-
 /* Current astate, is used when waking up from power savings on
  * one core, in case the other core has switched states during
  * the idle time.
@@ -242,15 +240,8 @@ static int pas_cpufreq_cpu_exit(struct cpufreq_policy *policy)
 static int pas_cpufreq_target(struct cpufreq_policy *policy,
 			      unsigned int pas_astate_new)
 {
-	struct cpufreq_freqs freqs;
 	int i;
 
-	freqs.old = policy->cur;
-	freqs.new = pas_freqs[pas_astate_new].frequency;
-
-	mutex_lock(&pas_switch_mutex);
-	cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
-
 	pr_debug("setting frequency for cpu %d to %d kHz, 1/%d of max frequency\n",
 		 policy->cpu,
 		 pas_freqs[pas_astate_new].frequency,
@@ -261,10 +252,7 @@ static int pas_cpufreq_target(struct cpufreq_policy *policy,
 	for_each_online_cpu(i)
 		set_astate(i, pas_astate_new);
 
-	cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
-	mutex_unlock(&pas_switch_mutex);
-
-	ppc_proc_freq = freqs.new * 1000ul;
+	ppc_proc_freq = pas_freqs[pas_astate_new].frequency * 1000ul;
 	return 0;
 }
 

drivers/cpufreq/pmac32-cpufreq.c

@@ -331,21 +331,11 @@ static int pmu_set_cpu_speed(int low_speed)
 	return 0;
 }
 
-static int do_set_cpu_speed(struct cpufreq_policy *policy, int speed_mode,
-		int notify)
+static int do_set_cpu_speed(struct cpufreq_policy *policy, int speed_mode)
 {
-	struct cpufreq_freqs freqs;
 	unsigned long l3cr;
 	static unsigned long prev_l3cr;
 
-	freqs.old = cur_freq;
-	freqs.new = (speed_mode == CPUFREQ_HIGH) ? hi_freq : low_freq;
-
-	if (freqs.old == freqs.new)
-		return 0;
-
-	if (notify)
-		cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
 	if (speed_mode == CPUFREQ_LOW &&
 	    cpu_has_feature(CPU_FTR_L3CR)) {
 		l3cr = _get_L3CR();
@@ -361,8 +351,6 @@ static int do_set_cpu_speed(struct cpufreq_policy *policy, int speed_mode,
 		if ((prev_l3cr & L3CR_L3E) && l3cr != prev_l3cr)
 			_set_L3CR(prev_l3cr);
 	}
-	if (notify)
-		cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
 	cur_freq = (speed_mode == CPUFREQ_HIGH) ? hi_freq : low_freq;
 
 	return 0;
@@ -378,7 +366,7 @@ static int pmac_cpufreq_target(	struct cpufreq_policy *policy,
 {
 	int		rc;
 
-	rc = do_set_cpu_speed(policy, index, 1);
+	rc = do_set_cpu_speed(policy, index);
 
 	ppc_proc_freq = cur_freq * 1000ul;
 	return rc;
@@ -420,7 +408,7 @@ static int pmac_cpufreq_suspend(struct cpufreq_policy *policy)
 	no_schedule = 1;
 	sleep_freq = cur_freq;
 	if (cur_freq == low_freq && !is_pmu_based)
-		do_set_cpu_speed(policy, CPUFREQ_HIGH, 0);
+		do_set_cpu_speed(policy, CPUFREQ_HIGH);
 	return 0;
 }
 
@@ -437,7 +425,7 @@ static int pmac_cpufreq_resume(struct cpufreq_policy *policy)
 	 * probably high speed due to our suspend() routine
 	 */
 	do_set_cpu_speed(policy, sleep_freq == low_freq ?
-			 CPUFREQ_LOW : CPUFREQ_HIGH, 0);
+			 CPUFREQ_LOW : CPUFREQ_HIGH);
 
 	ppc_proc_freq = cur_freq * 1000ul;
 

drivers/cpufreq/pmac64-cpufreq.c

@@ -79,8 +79,6 @@ static void (*g5_switch_volt)(int speed_mode);
 static int (*g5_switch_freq)(int speed_mode);
 static int (*g5_query_freq)(void);
 
-static DEFINE_MUTEX(g5_switch_mutex);
-
 static unsigned long transition_latency;
 
 #ifdef CONFIG_PMAC_SMU
@@ -314,21 +312,7 @@ static int g5_pfunc_query_freq(void)
 
 static int g5_cpufreq_target(struct cpufreq_policy *policy, unsigned int index)
 {
-	struct cpufreq_freqs freqs;
-	int rc;
-
-	mutex_lock(&g5_switch_mutex);
-
-	freqs.old = g5_cpu_freqs[g5_pmode_cur].frequency;
-	freqs.new = g5_cpu_freqs[index].frequency;
-
-	cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
-	rc = g5_switch_freq(index);
-	cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
-
-	mutex_unlock(&g5_switch_mutex);
-
-	return rc;
+	return g5_switch_freq(index);
 }
 
 static unsigned int g5_cpufreq_get_speed(unsigned int cpu)

drivers/cpufreq/powernow-k8.c

@@ -1204,6 +1204,7 @@ out:
 }
 
 static struct cpufreq_driver cpufreq_amd64_driver = {
+	.flags		= CPUFREQ_ASYNC_NOTIFICATION,
 	.verify		= cpufreq_generic_frequency_table_verify,
 	.target_index	= powernowk8_target,
 	.bios_limit	= acpi_processor_get_bios_limit,

drivers/cpufreq/ppc-corenet-cpufreq.c

@@ -69,8 +69,6 @@ static const struct soc_data sdata[] = {
 static u32 min_cpufreq;
 static const u32 *fmask;
 
-/* serialize frequency changes  */
-static DEFINE_MUTEX(cpufreq_lock);
 static DEFINE_PER_CPU(struct cpu_data *, cpu_data);
 
 /* cpumask in a cluster */
@@ -253,26 +251,11 @@ static int __exit corenet_cpufreq_cpu_exit(struct cpufreq_policy *policy)
 static int corenet_cpufreq_target(struct cpufreq_policy *policy,
 		unsigned int index)
 {
-	struct cpufreq_freqs freqs;
 	struct clk *parent;
-	int ret;
 	struct cpu_data *data = per_cpu(cpu_data, policy->cpu);
 
-	freqs.old = policy->cur;
-	freqs.new = data->table[index].frequency;
-
-	mutex_lock(&cpufreq_lock);
-	cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
-
 	parent = of_clk_get(data->parent, data->table[index].driver_data);
-	ret = clk_set_parent(data->clk, parent);
-	if (ret)
-		freqs.new = freqs.old;
-
-	cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
-	mutex_unlock(&cpufreq_lock);
-
-	return ret;
+	return clk_set_parent(data->clk, parent);
 }
 
 static struct cpufreq_driver ppc_corenet_cpufreq_driver = {

drivers/cpufreq/ppc_cbe_cpufreq.c

@@ -30,9 +30,6 @@
 
 #include "ppc_cbe_cpufreq.h"
 
-static DEFINE_MUTEX(cbe_switch_mutex);
-
-
 /* the CBE supports an 8 step frequency scaling */
 static struct cpufreq_frequency_table cbe_freqs[] = {
 	{1,	0},
@@ -131,27 +128,13 @@ static int cbe_cpufreq_cpu_init(struct cpufreq_policy *policy)
 static int cbe_cpufreq_target(struct cpufreq_policy *policy,
 			      unsigned int cbe_pmode_new)
 {
-	int rc;
-	struct cpufreq_freqs freqs;
-
-	freqs.old = policy->cur;
-	freqs.new = cbe_freqs[cbe_pmode_new].frequency;
-
-	mutex_lock(&cbe_switch_mutex);
-	cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
-
 	pr_debug("setting frequency for cpu %d to %d kHz, " \
 		 "1/%d of max frequency\n",
 		 policy->cpu,
 		 cbe_freqs[cbe_pmode_new].frequency,
 		 cbe_freqs[cbe_pmode_new].driver_data);
 
-	rc = set_pmode(policy->cpu, cbe_pmode_new);
-
-	cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
-	mutex_unlock(&cbe_switch_mutex);
-
-	return rc;
+	return set_pmode(policy->cpu, cbe_pmode_new);
 }
 
 static struct cpufreq_driver cbe_cpufreq_driver = {

drivers/cpufreq/pxa2xx-cpufreq.c

@@ -271,7 +271,6 @@ static int pxa_set_target(struct cpufreq_policy *policy, unsigned int idx)
 {
 	struct cpufreq_frequency_table *pxa_freqs_table;
 	pxa_freqs_t *pxa_freq_settings;
-	struct cpufreq_freqs freqs;
 	unsigned long flags;
 	unsigned int new_freq_cpu, new_freq_mem;
 	unsigned int unused, preset_mdrefr, postset_mdrefr, cclkcfg;
@@ -282,24 +281,17 @@ static int pxa_set_target(struct cpufreq_policy *policy, unsigned int idx)
 
 	new_freq_cpu = pxa_freq_settings[idx].khz;
 	new_freq_mem = pxa_freq_settings[idx].membus;
-	freqs.old = policy->cur;
-	freqs.new = new_freq_cpu;
 
 	if (freq_debug)
 		pr_debug("Changing CPU frequency to %d Mhz, (SDRAM %d Mhz)\n",
-			 freqs.new / 1000, (pxa_freq_settings[idx].div2) ?
+			 new_freq_cpu / 1000, (pxa_freq_settings[idx].div2) ?
 			 (new_freq_mem / 2000) : (new_freq_mem / 1000));
 
-	if (vcc_core && freqs.new > freqs.old)
+	if (vcc_core && new_freq_cpu > policy->cur) {
 		ret = pxa_cpufreq_change_voltage(&pxa_freq_settings[idx]);
-	if (ret)
-		return ret;
-	/*
-	 * Tell everyone what we're about to do...
-	 * you should add a notify client with any platform specific
-	 * Vcc changing capability
-	 */
-	cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
+		if (ret)
+			return ret;
+	}
 
 	/* Calculate the next MDREFR.  If we're slowing down the SDRAM clock
 	 * we need to preset the smaller DRI before the change.	 If we're
@@ -349,13 +341,6 @@ static int pxa_set_target(struct cpufreq_policy *policy, unsigned int idx)
 		     : "r4", "r5");
 	local_irq_restore(flags);
 
-	/*
-	 * Tell everyone what we've just done...
-	 * you should add a notify client with any platform specific
-	 * SDRAM refresh timer adjustments
-	 */
-	cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
-
 	/*
 	 * Even if voltage setting fails, we don't report it, as the frequency
 	 * change succeeded. The voltage reduction is not a critical failure,
@@ -365,7 +350,7 @@ static int pxa_set_target(struct cpufreq_policy *policy, unsigned int idx)
 	 * bug is triggered (seems a deadlock). Should anybody find out where,
 	 * the "return 0" should become a "return ret".
 	 */
-	if (vcc_core && freqs.new < freqs.old)
+	if (vcc_core && new_freq_cpu < policy->cur)
 		ret = pxa_cpufreq_change_voltage(&pxa_freq_settings[idx]);
 
 	return 0;

drivers/cpufreq/pxa3xx-cpufreq.c

@@ -158,7 +158,6 @@ static unsigned int pxa3xx_cpufreq_get(unsigned int cpu)
 static int pxa3xx_cpufreq_set(struct cpufreq_policy *policy, unsigned int index)
 {
 	struct pxa3xx_freq_info *next;
-	struct cpufreq_freqs freqs;
 	unsigned long flags;
 
 	if (policy->cpu != 0)
@@ -166,22 +165,11 @@ static int pxa3xx_cpufreq_set(struct cpufreq_policy *policy, unsigned int index)
 
 	next = &pxa3xx_freqs[index];
 
-	freqs.old = policy->cur;
-	freqs.new = next->cpufreq_mhz * 1000;
-
-	pr_debug("CPU frequency from %d MHz to %d MHz%s\n",
-			freqs.old / 1000, freqs.new / 1000,
-			(freqs.old == freqs.new) ? " (skipped)" : "");
-
-	cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
-
 	local_irq_save(flags);
 	__update_core_freq(next);
 	__update_bus_freq(next);
 	local_irq_restore(flags);
 
-	cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
-
 	return 0;
 }
 

drivers/cpufreq/s3c2416-cpufreq.c

@@ -220,7 +220,7 @@ static int s3c2416_cpufreq_set_target(struct cpufreq_policy *policy,
 				      unsigned int index)
 {
 	struct s3c2416_data *s3c_freq = &s3c2416_cpufreq;
-	struct cpufreq_freqs freqs;
+	unsigned int new_freq;
 	int idx, ret, to_dvs = 0;
 
 	mutex_lock(&cpufreq_lock);
@@ -237,25 +237,14 @@ static int s3c2416_cpufreq_set_target(struct cpufreq_policy *policy,
 		goto out;
 	}
 
-	freqs.flags = 0;
-	freqs.old = s3c_freq->is_dvs ? FREQ_DVS
-				     : clk_get_rate(s3c_freq->armclk) / 1000;
-
 	/* When leavin dvs mode, always switch the armdiv to the hclk rate
 	 * The S3C2416 has stability issues when switching directly to
 	 * higher frequencies.
 	 */
-	freqs.new = (s3c_freq->is_dvs && !to_dvs)
+	new_freq = (s3c_freq->is_dvs && !to_dvs)
 				? clk_get_rate(s3c_freq->hclk) / 1000
 				: s3c_freq->freq_table[index].frequency;
 
-	pr_debug("cpufreq: Transition %d-%dkHz\n", freqs.old, freqs.new);
-
-	if (!to_dvs && freqs.old == freqs.new)
-		goto out;
-
-	cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
-
 	if (to_dvs) {
 		pr_debug("cpufreq: enter dvs\n");
 		ret = s3c2416_cpufreq_enter_dvs(s3c_freq, idx);
@@ -263,12 +252,10 @@ static int s3c2416_cpufreq_set_target(struct cpufreq_policy *policy,
 		pr_debug("cpufreq: leave dvs\n");
 		ret = s3c2416_cpufreq_leave_dvs(s3c_freq, idx);
 	} else {
-		pr_debug("cpufreq: change armdiv to %dkHz\n", freqs.new);
-		ret = s3c2416_cpufreq_set_armdiv(s3c_freq, freqs.new);
+		pr_debug("cpufreq: change armdiv to %dkHz\n", new_freq);
+		ret = s3c2416_cpufreq_set_armdiv(s3c_freq, new_freq);
 	}
 
-	cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
-
 out:
 	mutex_unlock(&cpufreq_lock);
 

drivers/cpufreq/s3c64xx-cpufreq.c

@@ -65,54 +65,46 @@ static unsigned int s3c64xx_cpufreq_get_speed(unsigned int cpu)
 static int s3c64xx_cpufreq_set_target(struct cpufreq_policy *policy,
 				      unsigned int index)
 {
-	int ret;
-	struct cpufreq_freqs freqs;
 	struct s3c64xx_dvfs *dvfs;
+	unsigned int old_freq, new_freq;
+	int ret;
 
-	freqs.old = clk_get_rate(armclk) / 1000;
-	freqs.new = s3c64xx_freq_table[index].frequency;
-	freqs.flags = 0;
+	old_freq = clk_get_rate(armclk) / 1000;
+	new_freq = s3c64xx_freq_table[index].frequency;
 	dvfs = &s3c64xx_dvfs_table[s3c64xx_freq_table[index].driver_data];
 
-	pr_debug("Transition %d-%dkHz\n", freqs.old, freqs.new);
-
-	cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
-
 #ifdef CONFIG_REGULATOR
-	if (vddarm && freqs.new > freqs.old) {
+	if (vddarm && new_freq > old_freq) {
 		ret = regulator_set_voltage(vddarm,
 					    dvfs->vddarm_min,
 					    dvfs->vddarm_max);
 		if (ret != 0) {
 			pr_err("Failed to set VDDARM for %dkHz: %d\n",
-			       freqs.new, ret);
-			freqs.new = freqs.old;
-			goto post_notify;
+			       new_freq, ret);
+			return ret;
 		}
 	}
 #endif
 
-	ret = clk_set_rate(armclk, freqs.new * 1000);
+	ret = clk_set_rate(armclk, new_freq * 1000);
 	if (ret < 0) {
 		pr_err("Failed to set rate %dkHz: %d\n",
-		       freqs.new, ret);
-		freqs.new = freqs.old;
+		       new_freq, ret);
+		return ret;
 	}
 
-post_notify:
-	cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
-	if (ret)
-		goto err;
-
 #ifdef CONFIG_REGULATOR
-	if (vddarm && freqs.new < freqs.old) {
+	if (vddarm && new_freq < old_freq) {
 		ret = regulator_set_voltage(vddarm,
 					    dvfs->vddarm_min,
 					    dvfs->vddarm_max);
 		if (ret != 0) {
 			pr_err("Failed to set VDDARM for %dkHz: %d\n",
-			       freqs.new, ret);
-			goto err_clk;
+			       new_freq, ret);
+			if (clk_set_rate(armclk, old_freq * 1000) < 0)
+				pr_err("Failed to restore original clock rate\n");
+
+			return ret;
 		}
 	}
 #endif
@@ -121,14 +113,6 @@ post_notify:
 		 clk_get_rate(armclk) / 1000);
 
 	return 0;
-
-err_clk:
-	if (clk_set_rate(armclk, freqs.old * 1000) < 0)
-		pr_err("Failed to restore original clock rate\n");
-err:
-	cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
-
-	return ret;
 }
 
 #ifdef CONFIG_REGULATOR

drivers/cpufreq/s5pv210-cpufreq.c

@@ -26,7 +26,6 @@
 static struct clk *cpu_clk;
 static struct clk *dmc0_clk;
 static struct clk *dmc1_clk;
-static struct cpufreq_freqs freqs;
 static DEFINE_MUTEX(set_freq_lock);
 
 /* APLL M,P,S values for 1G/800Mhz */
@@ -179,6 +178,7 @@ static int s5pv210_target(struct cpufreq_policy *policy, unsigned int index)
 	unsigned int priv_index;
 	unsigned int pll_changing = 0;
 	unsigned int bus_speed_changing = 0;
+	unsigned int old_freq, new_freq;
 	int arm_volt, int_volt;
 	int ret = 0;
 
@@ -193,12 +193,12 @@ static int s5pv210_target(struct cpufreq_policy *policy, unsigned int index)
 		goto exit;
 	}
 
-	freqs.old = s5pv210_getspeed(0);
-	freqs.new = s5pv210_freq_table[index].frequency;
+	old_freq = s5pv210_getspeed(0);
+	new_freq = s5pv210_freq_table[index].frequency;
 
 	/* Finding current running level index */
 	if (cpufreq_frequency_table_target(policy, s5pv210_freq_table,
-					   freqs.old, CPUFREQ_RELATION_H,
+					   old_freq, CPUFREQ_RELATION_H,
 					   &priv_index)) {
 		ret = -EINVAL;
 		goto exit;
@@ -207,7 +207,7 @@ static int s5pv210_target(struct cpufreq_policy *policy, unsigned int index)
 	arm_volt = dvs_conf[index].arm_volt;
 	int_volt = dvs_conf[index].int_volt;
 
-	if (freqs.new > freqs.old) {
+	if (new_freq > old_freq) {
 		ret = regulator_set_voltage(arm_regulator,
 				arm_volt, arm_volt_max);
 		if (ret)
@@ -219,8 +219,6 @@ static int s5pv210_target(struct cpufreq_policy *policy, unsigned int index)
 			goto exit;
 	}
 
-	cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
-
 	/* Check if there need to change PLL */
 	if ((index == L0) || (priv_index == L0))
 		pll_changing = 1;
@@ -431,9 +429,7 @@ static int s5pv210_target(struct cpufreq_policy *policy, unsigned int index)
 		}
 	}
 
-	cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
-
-	if (freqs.new < freqs.old) {
+	if (new_freq < old_freq) {
 		regulator_set_voltage(int_regulator,
 				int_volt, int_volt_max);
 

drivers/cpufreq/sa1100-cpufreq.c

@@ -180,22 +180,17 @@ static void sa1100_update_dram_timings(int current_speed, int new_speed)
 static int sa1100_target(struct cpufreq_policy *policy, unsigned int ppcr)
 {
 	unsigned int cur = sa11x0_getspeed(0);
-	struct cpufreq_freqs freqs;
+	unsigned int new_freq;
 
-	freqs.old = cur;
-	freqs.new = sa11x0_freq_table[ppcr].frequency;
+	new_freq = sa11x0_freq_table[ppcr].frequency;
 
-	cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
-
-	if (freqs.new > cur)
-		sa1100_update_dram_timings(cur, freqs.new);
+	if (new_freq > cur)
+		sa1100_update_dram_timings(cur, new_freq);
 
 	PPCR = ppcr;
 
-	if (freqs.new < cur)
-		sa1100_update_dram_timings(cur, freqs.new);
-
-	cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
+	if (new_freq < cur)
+		sa1100_update_dram_timings(cur, new_freq);
 
 	return 0;
 }

drivers/cpufreq/sa1110-cpufreq.c

@@ -232,15 +232,11 @@ sdram_update_refresh(u_int cpu_khz, struct sdram_params *sdram)
 static int sa1110_target(struct cpufreq_policy *policy, unsigned int ppcr)
 {
 	struct sdram_params *sdram = &sdram_params;
-	struct cpufreq_freqs freqs;
 	struct sdram_info sd;
 	unsigned long flags;
 	unsigned int unused;
 
-	freqs.old = sa11x0_getspeed(0);
-	freqs.new = sa11x0_freq_table[ppcr].frequency;
-
-	sdram_calculate_timing(&sd, freqs.new, sdram);
+	sdram_calculate_timing(&sd, sa11x0_freq_table[ppcr].frequency, sdram);
 
 #if 0
 	/*
@@ -259,8 +255,6 @@ static int sa1110_target(struct cpufreq_policy *policy, unsigned int ppcr)
 	sd.mdcas[2] = 0xaaaaaaaa;
 #endif
 
-	cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
-
 	/*
 	 * The clock could be going away for some time.  Set the SDRAMs
 	 * to refresh rapidly (every 64 memory clock cycles).  To get
@@ -305,9 +299,7 @@ static int sa1110_target(struct cpufreq_policy *policy, unsigned int ppcr)
 	/*
 	 * Now, return the SDRAM refresh back to normal.
 	 */
-	sdram_update_refresh(freqs.new, sdram);
-
-	cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
+	sdram_update_refresh(sa11x0_freq_table[ppcr].frequency, sdram);
 
 	return 0;
 }

drivers/cpufreq/sc520_freq.c

@@ -56,17 +56,8 @@ static unsigned int sc520_freq_get_cpu_frequency(unsigned int cpu)
 static int sc520_freq_target(struct cpufreq_policy *policy, unsigned int state)
 {
 
-	struct cpufreq_freqs	freqs;
 	u8 clockspeed_reg;
 
-	freqs.old = sc520_freq_get_cpu_frequency(0);
-	freqs.new = sc520_freq_table[state].frequency;
-
-	cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
-
-	pr_debug("attempting to set frequency to %i kHz\n",
-			sc520_freq_table[state].frequency);
-
 	local_irq_disable();
 
 	clockspeed_reg = *cpuctl & ~0x03;
@@ -74,8 +65,6 @@ static int sc520_freq_target(struct cpufreq_policy *policy, unsigned int state)
 
 	local_irq_enable();
 
-	cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
-
 	return 0;
 }
 

drivers/cpufreq/sparc-us2e-cpufreq.c

@@ -251,7 +251,6 @@ static int us2e_freq_target(struct cpufreq_policy *policy, unsigned int index)
 	unsigned long new_bits, new_freq;
 	unsigned long clock_tick, divisor, old_divisor, estar;
 	cpumask_t cpus_allowed;
-	struct cpufreq_freqs freqs;
 
 	cpumask_copy(&cpus_allowed, tsk_cpus_allowed(current));
 	set_cpus_allowed_ptr(current, cpumask_of(cpu));
@@ -265,16 +264,10 @@ static int us2e_freq_target(struct cpufreq_policy *policy, unsigned int index)
 
 	old_divisor = estar_to_divisor(estar);
 
-	freqs.old = clock_tick / old_divisor;
-	freqs.new = new_freq;
-	cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
-
 	if (old_divisor != divisor)
 		us2e_transition(estar, new_bits, clock_tick * 1000,
 				old_divisor, divisor);
 
-	cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
-
 	set_cpus_allowed_ptr(current, &cpus_allowed);
 
 	return 0;

drivers/cpufreq/sparc-us3-cpufreq.c

@@ -98,7 +98,6 @@ static int us3_freq_target(struct cpufreq_policy *policy, unsigned int index)
 	unsigned int cpu = policy->cpu;
 	unsigned long new_bits, new_freq, reg;
 	cpumask_t cpus_allowed;
-	struct cpufreq_freqs freqs;
 
 	cpumask_copy(&cpus_allowed, tsk_cpus_allowed(current));
 	set_cpus_allowed_ptr(current, cpumask_of(cpu));
@@ -124,16 +123,10 @@ static int us3_freq_target(struct cpufreq_policy *policy, unsigned int index)
 
 	reg = read_safari_cfg();
 
-	freqs.old = get_current_freq(cpu, reg);
-	freqs.new = new_freq;
-	cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
-
 	reg &= ~SAFARI_CFG_DIV_MASK;
 	reg |= new_bits;
 	write_safari_cfg(reg);
 
-	cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
-
 	set_cpus_allowed_ptr(current, &cpus_allowed);
 
 	return 0;

drivers/cpufreq/spear-cpufreq.c

@@ -107,12 +107,10 @@ static int spear1340_set_cpu_rate(struct clk *sys_pclk, unsigned long newfreq)
 static int spear_cpufreq_target(struct cpufreq_policy *policy,
 		unsigned int index)
 {
-	struct cpufreq_freqs freqs;
 	long newfreq;
 	struct clk *srcclk;
 	int ret, mult = 1;
 
-	freqs.old = spear_cpufreq_get(0);
 	newfreq = spear_cpufreq.freq_tbl[index].frequency * 1000;
 
 	if (of_machine_is_compatible("st,spear1340")) {
@@ -145,23 +143,14 @@ static int spear_cpufreq_target(struct cpufreq_policy *policy,
 		return newfreq;
 	}
 
-	freqs.new = newfreq / 1000;
-	freqs.new /= mult;
-
-	cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
-
 	if (mult == 2)
 		ret = spear1340_set_cpu_rate(srcclk, newfreq);
 	else
 		ret = clk_set_rate(spear_cpufreq.clk, newfreq);
 
-	/* Get current rate after clk_set_rate, in case of failure */
-	if (ret) {
+	if (ret)
 		pr_err("CPU Freq: cpu clk_set_rate failed: %d\n", ret);
-		freqs.new = clk_get_rate(spear_cpufreq.clk) / 1000;
-	}
 
-	cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
 	return ret;
 }
 

drivers/cpufreq/speedstep-centrino.c

@@ -423,9 +423,8 @@ static int centrino_cpu_exit(struct cpufreq_policy *policy)
 static int centrino_target(struct cpufreq_policy *policy, unsigned int index)
 {
 	unsigned int	msr, oldmsr = 0, h = 0, cpu = policy->cpu;
-	struct cpufreq_freqs	freqs;
 	int			retval = 0;
-	unsigned int		j, first_cpu, tmp;
+	unsigned int		j, first_cpu;
 	struct cpufreq_frequency_table *op_points;
 	cpumask_var_t covered_cpus;
 
@@ -473,16 +472,6 @@ static int centrino_target(struct cpufreq_policy *policy, unsigned int index)
 				goto out;
 			}
 
-			freqs.old = extract_clock(oldmsr, cpu, 0);
-			freqs.new = extract_clock(msr, cpu, 0);
-
-			pr_debug("target=%dkHz old=%d new=%d msr=%04x\n",
-				op_points->frequency, freqs.old, freqs.new,
-				msr);
-
-			cpufreq_notify_transition(policy, &freqs,
-					CPUFREQ_PRECHANGE);
-
 			first_cpu = 0;
 			/* all but 16 LSB are reserved, treat them with care */
 			oldmsr &= ~0xffff;
@@ -497,8 +486,6 @@ static int centrino_target(struct cpufreq_policy *policy, unsigned int index)
 		cpumask_set_cpu(j, covered_cpus);
 	}
 
-	cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
-
 	if (unlikely(retval)) {
 		/*
 		 * We have failed halfway through the frequency change.
@@ -509,12 +496,6 @@ static int centrino_target(struct cpufreq_policy *policy, unsigned int index)
 
 		for_each_cpu(j, covered_cpus)
 			wrmsr_on_cpu(j, MSR_IA32_PERF_CTL, oldmsr, h);
-
-		tmp = freqs.new;
-		freqs.new = freqs.old;
-		freqs.old = tmp;
-		cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
-		cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
 	}
 	retval = 0;
 

drivers/cpufreq/speedstep-ich.c

@@ -258,21 +258,12 @@ static unsigned int speedstep_get(unsigned int cpu)
 static int speedstep_target(struct cpufreq_policy *policy, unsigned int index)
 {
 	unsigned int policy_cpu;
-	struct cpufreq_freqs freqs;
 
 	policy_cpu = cpumask_any_and(policy->cpus, cpu_online_mask);
-	freqs.old = speedstep_get(policy_cpu);
-	freqs.new = speedstep_freqs[index].frequency;
-
-	pr_debug("transiting from %u to %u kHz\n", freqs.old, freqs.new);
-
-	cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
 
 	smp_call_function_single(policy_cpu, _speedstep_set_state, &index,
 				 true);
 
-	cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
-
 	return 0;
 }
 

drivers/cpufreq/speedstep-smi.c

@@ -241,14 +241,7 @@ static void speedstep_set_state(unsigned int state)
  */
 static int speedstep_target(struct cpufreq_policy *policy, unsigned int index)
 {
-	struct cpufreq_freqs freqs;
-
-	freqs.old = speedstep_freqs[speedstep_get_state()].frequency;
-	freqs.new = speedstep_freqs[index].frequency;
-
-	cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
 	speedstep_set_state(index);
-	cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
 
 	return 0;
 }

drivers/cpufreq/tegra-cpufreq.c

@@ -102,12 +102,8 @@ static int tegra_update_cpu_speed(struct cpufreq_policy *policy,
 		unsigned long rate)
 {
 	int ret = 0;
-	struct cpufreq_freqs freqs;
 
-	freqs.old = tegra_getspeed(0);
-	freqs.new = rate;
-
-	if (freqs.old == freqs.new)
+	if (tegra_getspeed(0) == rate)
 		return ret;
 
 	/*
@@ -121,21 +117,10 @@ static int tegra_update_cpu_speed(struct cpufreq_policy *policy,
 	else
 		clk_set_rate(emc_clk, 100000000);  /* emc 50Mhz */
 
-	cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
-
-#ifdef CONFIG_CPU_FREQ_DEBUG
-	printk(KERN_DEBUG "cpufreq-tegra: transition: %u --> %u\n",
-	       freqs.old, freqs.new);
-#endif
-
-	ret = tegra_cpu_clk_set_rate(freqs.new * 1000);
-	if (ret) {
-		pr_err("cpu-tegra: Failed to set cpu frequency to %d kHz\n",
-			freqs.new);
-		freqs.new = freqs.old;
-	}
-
-	cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
+	ret = tegra_cpu_clk_set_rate(rate * 1000);
+	if (ret)
+		pr_err("cpu-tegra: Failed to set cpu frequency to %lu kHz\n",
+			rate);
 
 	return ret;
 }

drivers/cpufreq/vexpress-spc-cpufreq.c

@@ -0,0 +1,70 @@
+/*
+ * Versatile Express SPC CPUFreq Interface driver
+ *
+ * It provides necessary ops to arm_big_little cpufreq driver.
+ *
+ * Copyright (C) 2013 ARM Ltd.
+ * Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/cpufreq.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pm_opp.h>
+#include <linux/types.h>
+
+#include "arm_big_little.h"
+
+static int ve_spc_init_opp_table(struct device *cpu_dev)
+{
+	/*
+	 * platform specific SPC code must initialise the opp table
+	 * so just check if the OPP count is non-zero
+	 */
+	return dev_pm_opp_get_opp_count(cpu_dev) <= 0;
+}
+
+static int ve_spc_get_transition_latency(struct device *cpu_dev)
+{
+	return 1000000; /* 1 ms */
+}
+
+static struct cpufreq_arm_bL_ops ve_spc_cpufreq_ops = {
+	.name	= "vexpress-spc",
+	.get_transition_latency = ve_spc_get_transition_latency,
+	.init_opp_table = ve_spc_init_opp_table,
+};
+
+static int ve_spc_cpufreq_probe(struct platform_device *pdev)
+{
+	return bL_cpufreq_register(&ve_spc_cpufreq_ops);
+}
+
+static int ve_spc_cpufreq_remove(struct platform_device *pdev)
+{
+	bL_cpufreq_unregister(&ve_spc_cpufreq_ops);
+	return 0;
+}
+
+static struct platform_driver ve_spc_cpufreq_platdrv = {
+	.driver = {
+		.name	= "vexpress-spc-cpufreq",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= ve_spc_cpufreq_probe,
+	.remove		= ve_spc_cpufreq_remove,
+};
+module_platform_driver(ve_spc_cpufreq_platdrv);
+
+MODULE_LICENSE("GPL");

include/linux/cpufreq.h

@@ -237,6 +237,13 @@ struct cpufreq_driver {
  */
 #define CPUFREQ_HAVE_GOVERNOR_PER_POLICY (1 << 3)
 
+/*
+ * Driver will do POSTCHANGE notifications from outside of their ->target()
+ * routine and so must set cpufreq_driver->flags with this flag, so that core
+ * can handle them specially.
+ */
+#define CPUFREQ_ASYNC_NOTIFICATION  (1 << 4)
+
 int cpufreq_register_driver(struct cpufreq_driver *driver_data);
 int cpufreq_unregister_driver(struct cpufreq_driver *driver_data);