Merge tag 'omap-cleanup-a2-for-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending into cleanup-sparse

Resolve static analysis warnings generated by files in
arch/arm/mach-omap1, arch/arm/mach-omap2, and arch/arm/plat-omap.
Fixes all but one sparse warning and most of the useful
cppcheck warnings (excepting the warnings generated by the
dmtimer integration code which is going up via 3.4-rc fixes)

arch/arm/mach-omap1/Makefile

@@ -12,6 +12,9 @@ endif
 
 obj-$(CONFIG_OMAP_32K_TIMER)	+= timer32k.o
 
+# OCPI interconnect support for 1710, 1610 and 5912
+obj-$(CONFIG_ARCH_OMAP16XX) += ocpi.o
+
 # Power Management
 obj-$(CONFIG_PM) += pm.o sleep.o
 
@@ -28,13 +31,15 @@ usb-fs-$(CONFIG_USB)			:= usb.o
 obj-y					+= $(usb-fs-m) $(usb-fs-y)
 
 # Specific board support
-obj-$(CONFIG_MACH_OMAP_H2)		+= board-h2.o board-h2-mmc.o
+obj-$(CONFIG_MACH_OMAP_H2)		+= board-h2.o board-h2-mmc.o \
+					   board-nand.o
 obj-$(CONFIG_MACH_OMAP_INNOVATOR)	+= board-innovator.o
 obj-$(CONFIG_MACH_OMAP_GENERIC)		+= board-generic.o
-obj-$(CONFIG_MACH_OMAP_PERSEUS2)	+= board-perseus2.o
-obj-$(CONFIG_MACH_OMAP_FSAMPLE)		+= board-fsample.o
+obj-$(CONFIG_MACH_OMAP_PERSEUS2)	+= board-perseus2.o board-nand.o
+obj-$(CONFIG_MACH_OMAP_FSAMPLE)		+= board-fsample.o board-nand.o
 obj-$(CONFIG_MACH_OMAP_OSK)		+= board-osk.o
-obj-$(CONFIG_MACH_OMAP_H3)		+= board-h3.o board-h3-mmc.o
+obj-$(CONFIG_MACH_OMAP_H3)		+= board-h3.o board-h3-mmc.o \
+					   board-nand.o
 obj-$(CONFIG_MACH_VOICEBLUE)		+= board-voiceblue.o
 obj-$(CONFIG_MACH_OMAP_PALMTE)		+= board-palmte.o
 obj-$(CONFIG_MACH_OMAP_PALMZ71)		+= board-palmz71.o

arch/arm/mach-omap1/ams-delta-fiq.c

@@ -102,7 +102,7 @@ void __init ams_delta_init_fiq(void)
 	}
 
 	retval = request_irq(INT_DEFERRED_FIQ, deferred_fiq,
-			IRQ_TYPE_EDGE_RISING, "deferred_fiq", 0);
+			IRQ_TYPE_EDGE_RISING, "deferred_fiq", NULL);
 	if (retval < 0) {
 		pr_err("Failed to get deferred_fiq IRQ, ret=%d\n", retval);
 		release_fiq(&fh);

arch/arm/mach-omap1/board-fsample.c

@@ -185,20 +185,6 @@ static struct platform_device nor_device = {
 	.resource	= &nor_resource,
 };
 
-static void nand_cmd_ctl(struct mtd_info *mtd, int cmd,	unsigned int ctrl)
-{
-	struct nand_chip *this = mtd->priv;
-	unsigned long mask;
-
-	if (cmd == NAND_CMD_NONE)
-		return;
-
-	mask = (ctrl & NAND_CLE) ? 0x02 : 0;
-	if (ctrl & NAND_ALE)
-		mask |= 0x04;
-	writeb(cmd, (unsigned long)this->IO_ADDR_W | mask);
-}
-
 #define FSAMPLE_NAND_RB_GPIO_PIN	62
 
 static int nand_dev_ready(struct mtd_info *mtd)
@@ -216,7 +202,7 @@ static struct platform_nand_data nand_data = {
 		.part_probe_types	= part_probes,
 	},
 	.ctrl	= {
-		.cmd_ctrl	= nand_cmd_ctl,
+		.cmd_ctrl	= omap1_nand_cmd_ctl,
 		.dev_ready	= nand_dev_ready,
 	},
 };

arch/arm/mach-omap1/board-h2.c

@@ -179,20 +179,6 @@ static struct mtd_partition h2_nand_partitions[] = {
 	},
 };
 
-static void h2_nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
-{
-	struct nand_chip *this = mtd->priv;
-	unsigned long mask;
-
-	if (cmd == NAND_CMD_NONE)
-		return;
-
-	mask = (ctrl & NAND_CLE) ? 0x02 : 0;
-	if (ctrl & NAND_ALE)
-		mask |= 0x04;
-	writeb(cmd, (unsigned long)this->IO_ADDR_W | mask);
-}
-
 #define H2_NAND_RB_GPIO_PIN	62
 
 static int h2_nand_dev_ready(struct mtd_info *mtd)
@@ -212,9 +198,8 @@ static struct platform_nand_data h2_nand_platdata = {
 		.part_probe_types	= h2_part_probes,
 	},
 	.ctrl	= {
-		.cmd_ctrl	= h2_nand_cmd_ctl,
+		.cmd_ctrl	= omap1_nand_cmd_ctl,
 		.dev_ready	= h2_nand_dev_ready,
-
 	},
 };
 

arch/arm/mach-omap1/board-h3.c

@@ -181,20 +181,6 @@ static struct mtd_partition nand_partitions[] = {
 	},
 };
 
-static void nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
-{
-	struct nand_chip *this = mtd->priv;
-	unsigned long mask;
-
-	if (cmd == NAND_CMD_NONE)
-		return;
-
-	mask = (ctrl & NAND_CLE) ? 0x02 : 0;
-	if (ctrl & NAND_ALE)
-		mask |= 0x04;
-	writeb(cmd, (unsigned long)this->IO_ADDR_W | mask);
-}
-
 #define H3_NAND_RB_GPIO_PIN	10
 
 static int nand_dev_ready(struct mtd_info *mtd)
@@ -214,7 +200,7 @@ static struct platform_nand_data nand_platdata = {
 		.part_probe_types	= part_probes,
 	},
 	.ctrl	= {
-		.cmd_ctrl	= nand_cmd_ctl,
+		.cmd_ctrl	= omap1_nand_cmd_ctl,
 		.dev_ready	= nand_dev_ready,
 
 	},

arch/arm/mach-omap1/board-nand.c

@@ -0,0 +1,37 @@
+/*
+ * linux/arch/arm/mach-omap1/board-nand.c
+ *
+ * Common OMAP1 board NAND code
+ *
+ * Copyright (C) 2004, 2012 Texas Instruments, Inc.
+ * Copyright (C) 2002 MontaVista Software, Inc.
+ * Copyright (C) 2001 RidgeRun, Inc.
+ * Author: RidgeRun, Inc.
+ *         Greg Lonnon (glonnon@ridgerun.com) or info@ridgerun.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+
+#include "common.h"
+
+void omap1_nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+{
+	struct nand_chip *this = mtd->priv;
+	unsigned long mask;
+
+	if (cmd == NAND_CMD_NONE)
+		return;
+
+	mask = (ctrl & NAND_CLE) ? 0x02 : 0;
+	if (ctrl & NAND_ALE)
+		mask |= 0x04;
+
+	writeb(cmd, this->IO_ADDR_W + mask);
+}
+

arch/arm/mach-omap1/board-palmz71.c

@@ -289,10 +289,10 @@ palmz71_gpio_setup(int early)
 		gpio_direction_input(PALMZ71_USBDETECT_GPIO);
 		if (request_irq(gpio_to_irq(PALMZ71_USBDETECT_GPIO),
 				palmz71_powercable, IRQF_SAMPLE_RANDOM,
-				"palmz71-cable", 0))
+				"palmz71-cable", NULL))
 			printk(KERN_ERR
 					"IRQ request for power cable failed!\n");
-		palmz71_powercable(gpio_to_irq(PALMZ71_USBDETECT_GPIO), 0);
+		palmz71_powercable(gpio_to_irq(PALMZ71_USBDETECT_GPIO), NULL);
 	}
 }
 

arch/arm/mach-omap1/board-perseus2.c

@@ -143,20 +143,6 @@ static struct platform_device nor_device = {
 	.resource	= &nor_resource,
 };
 
-static void nand_cmd_ctl(struct mtd_info *mtd, int cmd,	unsigned int ctrl)
-{
-	struct nand_chip *this = mtd->priv;
-	unsigned long mask;
-
-	if (cmd == NAND_CMD_NONE)
-		return;
-
-	mask = (ctrl & NAND_CLE) ? 0x02 : 0;
-	if (ctrl & NAND_ALE)
-		mask |= 0x04;
-	writeb(cmd, (unsigned long)this->IO_ADDR_W | mask);
-}
-
 #define P2_NAND_RB_GPIO_PIN	62
 
 static int nand_dev_ready(struct mtd_info *mtd)
@@ -174,7 +160,7 @@ static struct platform_nand_data nand_data = {
 		.part_probe_types	= part_probes,
 	},
 	.ctrl	= {
-		.cmd_ctrl	= nand_cmd_ctl,
+		.cmd_ctrl	= omap1_nand_cmd_ctl,
 		.dev_ready	= nand_dev_ready,
 	},
 };

arch/arm/mach-omap1/clock.c

@@ -194,9 +194,8 @@ int omap1_select_table_rate(struct clk *clk, unsigned long rate)
 {
 	/* Find the highest supported frequency <= rate and switch to it */
 	struct mpu_rate * ptr;
-	unsigned long dpll1_rate, ref_rate;
+	unsigned long ref_rate;
 
-	dpll1_rate = ck_dpll1_p->rate;
 	ref_rate = ck_ref_p->rate;
 
 	for (ptr = omap1_rate_table; ptr->rate; ptr++) {

arch/arm/mach-omap1/common.h

@@ -27,6 +27,7 @@
 #define __ARCH_ARM_MACH_OMAP1_COMMON_H
 
 #include <plat/common.h>
+#include <linux/mtd/mtd.h>
 
 #if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
 void omap7xx_map_io(void);
@@ -56,8 +57,16 @@ void omap1_init_early(void);
 void omap1_init_irq(void);
 void omap1_restart(char, const char *);
 
+extern void __init omap_check_revision(void);
+
+extern void omap1_nand_cmd_ctl(struct mtd_info *mtd, int cmd,
+			       unsigned int ctrl);
+
 extern struct sys_timer omap1_timer;
 extern bool omap_32k_timer_init(void);
-extern void __init omap_init_consistent_dma_size(void);
+
+extern u32 omap_irq_flags;
+
+extern int ocpi_enable(void);
 
 #endif /* __ARCH_ARM_MACH_OMAP1_COMMON_H */

arch/arm/mach-omap1/fpga.c

@@ -87,7 +87,7 @@ static void fpga_mask_ack_irq(struct irq_data *d)
 	fpga_ack_irq(d);
 }
 
-void innovator_fpga_IRQ_demux(unsigned int irq, struct irq_desc *desc)
+static void innovator_fpga_IRQ_demux(unsigned int irq, struct irq_desc *desc)
 {
 	u32 stat;
 	int fpga_irq;

arch/arm/mach-omap1/id.c

@@ -21,6 +21,8 @@
 
 #include <mach/hardware.h>
 
+#include "common.h"
+
 #define OMAP_DIE_ID_0		0xfffe1800
 #define OMAP_DIE_ID_1		0xfffe1804
 #define OMAP_PRODUCTION_ID_0	0xfffe2000

arch/arm/mach-omap1/io.c

@@ -18,13 +18,12 @@
 
 #include <plat/mux.h>
 #include <plat/tc.h>
+#include <plat/dma.h>
 
 #include "iomap.h"
 #include "common.h"
 #include "clock.h"
 
-extern void omap_check_revision(void);
-
 /*
  * The machine specific code may provide the extra mapping besides the
  * default mapping provided here.

arch/arm/mach-omap1/irq.c

@@ -49,6 +49,8 @@
 
 #include <mach/hardware.h>
 
+#include "common.h"
+
 #define IRQ_BANK(irq) ((irq) >> 5)
 #define IRQ_BIT(irq)  ((irq) & 0x1f)
 

arch/arm/mach-omap1/lcd_dma.c

@@ -57,7 +57,7 @@ static struct lcd_dma_info {
 	void *cb_data;
 
 	int active;
-	unsigned long addr, size;
+	unsigned long addr;
 	int rotate, data_type, xres, yres;
 	int vxres;
 	int mirror;
@@ -77,11 +77,6 @@ void omap_set_lcd_dma_b1(unsigned long addr, u16 fb_xres, u16 fb_yres,
 }
 EXPORT_SYMBOL(omap_set_lcd_dma_b1);
 
-void omap_set_lcd_dma_src_port(int port)
-{
-	lcd_dma.src_port = port;
-}
-
 void omap_set_lcd_dma_ext_controller(int external)
 {
 	lcd_dma.ext_ctrl = external;

arch/arm/plat-omap/ocpi.c → arch/arm/mach-omap1/ocpi.c

@@ -4,6 +4,7 @@
  * Minimal OCP bus support for omap16xx
  *
  * Copyright (C) 2003 - 2005 Nokia Corporation
+ * Copyright (C) 2012 Texas Instruments, Inc.
  * Written by Tony Lindgren <tony@atomide.com>
  *
  * Modified for clock framework by Paul Mundt <paul.mundt@nokia.com>.
@@ -35,6 +36,8 @@
 
 #include <mach/hardware.h>
 
+#include "common.h"
+
 #define OCPI_BASE		0xfffec320
 #define OCPI_FAULT		(OCPI_BASE + 0x00)
 #define OCPI_CMD_FAULT		(OCPI_BASE + 0x04)
@@ -64,7 +67,7 @@ int ocpi_enable(void)
 	/* Enable access for OHCI in OCPI */
 	val = omap_readl(OCPI_PROT);
 	val &= ~0xff;
-	//val &= (1 << 0);	/* Allow access only to EMIFS */
+	/* val &= (1 << 0);	 Allow access only to EMIFS */
 	omap_writel(val, OCPI_PROT);
 
 	val = omap_readl(OCPI_SEC);
@@ -86,7 +89,7 @@ static int __init omap_ocpi_init(void)
 
 	clk_enable(ocpi_ck);
 	ocpi_enable();
-	printk("OMAP OCPI interconnect driver loaded\n");
+	pr_info("OMAP OCPI interconnect driver loaded\n");
 
 	return 0;
 }

arch/arm/mach-omap1/pm.c

@@ -569,11 +569,10 @@ static int omap_pm_read_proc(
 
 static void omap_pm_init_proc(void)
 {
-	struct proc_dir_entry *entry;
-
-	entry = create_proc_read_entry("driver/omap_pm",
-				       S_IWUSR | S_IRUGO, NULL,
-				       omap_pm_read_proc, NULL);
+	/* XXX Appears to leak memory */
+	create_proc_read_entry("driver/omap_pm",
+			       S_IWUSR | S_IRUGO, NULL,
+			       omap_pm_read_proc, NULL);
 }
 
 #endif /* DEBUG && CONFIG_PROC_FS */

arch/arm/mach-omap1/reset.c

@@ -8,6 +8,8 @@
 
 #include <mach/hardware.h>
 
+#include "common.h"
+
 void omap1_restart(char mode, const char *cmd)
 {
 	/*

arch/arm/mach-omap1/timer.c

@@ -54,8 +54,7 @@ static int omap1_dm_timer_set_src(struct platform_device *pdev,
 	return 0;
 }
 
-
-int __init omap1_dm_timer_init(void)
+static int __init omap1_dm_timer_init(void)
 {
 	int i;
 	int ret;

arch/arm/mach-omap1/usb.c

@@ -29,6 +29,8 @@
 #include <plat/mux.h>
 #include <plat/usb.h>
 
+#include "common.h"
+
 /* These routines should handle the standard chip-specific modes
  * for usb0/1/2 ports, covering basic mux and transceiver setup.
  *
@@ -138,6 +140,7 @@ static inline void ohci_device_init(struct omap_usb_config *pdata)
 	if (cpu_is_omap7xx())
 		ohci_resources[1].start = INT_7XX_USB_HHC_1;
 	pdata->ohci_device = &ohci_device;
+	pdata->ocpi_enable = &ocpi_enable;
 }
 
 #else

arch/arm/mach-omap2/am35xx-emac.c

@@ -39,26 +39,23 @@ static struct platform_device am35xx_emac_mdio_device = {
 
 static void am35xx_enable_emac_int(void)
 {
-	u32 regval;
-
-	regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
-	regval = (regval | AM35XX_CPGMAC_C0_RX_PULSE_CLR |
-		  AM35XX_CPGMAC_C0_TX_PULSE_CLR |
-		  AM35XX_CPGMAC_C0_MISC_PULSE_CLR |
-		  AM35XX_CPGMAC_C0_RX_THRESH_CLR);
-	omap_ctrl_writel(regval, AM35XX_CONTROL_LVL_INTR_CLEAR);
-	regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
+	u32 v;
+
+	v = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
+	v |= (AM35XX_CPGMAC_C0_RX_PULSE_CLR | AM35XX_CPGMAC_C0_TX_PULSE_CLR |
+	      AM35XX_CPGMAC_C0_MISC_PULSE_CLR | AM35XX_CPGMAC_C0_RX_THRESH_CLR);
+	omap_ctrl_writel(v, AM35XX_CONTROL_LVL_INTR_CLEAR);
+	omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); /* OCP barrier */
 }
 
 static void am35xx_disable_emac_int(void)
 {
-	u32 regval;
+	u32 v;
 
-	regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
-	regval = (regval | AM35XX_CPGMAC_C0_RX_PULSE_CLR |
-		  AM35XX_CPGMAC_C0_TX_PULSE_CLR);
-	omap_ctrl_writel(regval, AM35XX_CONTROL_LVL_INTR_CLEAR);
-	regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
+	v = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
+	v |= (AM35XX_CPGMAC_C0_RX_PULSE_CLR | AM35XX_CPGMAC_C0_TX_PULSE_CLR);
+	omap_ctrl_writel(v, AM35XX_CONTROL_LVL_INTR_CLEAR);
+	omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); /* OCP barrier */
 }
 
 static struct emac_platform_data am35xx_emac_pdata = {
@@ -92,7 +89,7 @@ static struct platform_device am35xx_emac_device = {
 
 void __init am35xx_emac_init(unsigned long mdio_bus_freq, u8 rmii_en)
 {
-	unsigned int regval;
+	u32 v;
 	int err;
 
 	am35xx_emac_pdata.rmii_en = rmii_en;
@@ -110,8 +107,8 @@ void __init am35xx_emac_init(unsigned long mdio_bus_freq, u8 rmii_en)
 		return;
 	}
 
-	regval = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET);
-	regval = regval & (~(AM35XX_CPGMACSS_SW_RST));
-	omap_ctrl_writel(regval, AM35XX_CONTROL_IP_SW_RESET);
-	regval = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET);
+	v = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET);
+	v &= ~AM35XX_CPGMACSS_SW_RST;
+	omap_ctrl_writel(v, AM35XX_CONTROL_IP_SW_RESET);
+	omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET); /* OCP barrier */
 }

arch/arm/mach-omap2/board-omap3evm.c

@@ -630,13 +630,13 @@ static struct regulator_consumer_supply dummy_supplies[] = {
 
 static void __init omap3_evm_init(void)
 {
+	struct omap_board_mux *obm;
+
 	omap3_evm_get_revision();
 	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
 
-	if (cpu_is_omap3630())
-		omap3_mux_init(omap36x_board_mux, OMAP_PACKAGE_CBB);
-	else
-		omap3_mux_init(omap35x_board_mux, OMAP_PACKAGE_CBB);
+	obm = (cpu_is_omap3630()) ? omap36x_board_mux : omap35x_board_mux;
+	omap3_mux_init(obm, OMAP_PACKAGE_CBB);
 
 	omap_board_config = omap3_evm_config;
 	omap_board_config_size = ARRAY_SIZE(omap3_evm_config);

arch/arm/mach-omap2/board-omap4panda.c

@@ -230,7 +230,7 @@ static struct platform_device omap_vwlan_device = {
 	},
 };
 
-struct wl12xx_platform_data omap_panda_wlan_data  __initdata = {
+static struct wl12xx_platform_data omap_panda_wlan_data  __initdata = {
 	/* PANDA ref clock is 38.4 MHz */
 	.board_ref_clock = 2,
 };
@@ -439,7 +439,7 @@ static struct panel_dvi_platform_data omap4_dvi_panel = {
 	.i2c_bus_num = 3,
 };
 
-struct omap_dss_device omap4_panda_dvi_device = {
+static struct omap_dss_device omap4_panda_dvi_device = {
 	.type			= OMAP_DISPLAY_TYPE_DPI,
 	.name			= "dvi",
 	.driver_name		= "dvi",
@@ -449,7 +449,7 @@ struct omap_dss_device omap4_panda_dvi_device = {
 	.channel		= OMAP_DSS_CHANNEL_LCD2,
 };
 
-int __init omap4_panda_dvi_init(void)
+static int __init omap4_panda_dvi_init(void)
 {
 	int r;
 
@@ -510,7 +510,7 @@ static struct omap_dss_board_info omap4_panda_dss_data = {
 	.default_device	= &omap4_panda_dvi_device,
 };
 
-void __init omap4_panda_display_init(void)
+static void __init omap4_panda_display_init(void)
 {
 	int r;
 

arch/arm/mach-omap2/board-rx51-peripherals.c

@@ -872,11 +872,11 @@ static struct twl4030_power_data rx51_t2scripts_data __initdata = {
 	.resource_config = twl4030_rconfig,
 };
 
-struct twl4030_vibra_data rx51_vibra_data __initdata = {
+static struct twl4030_vibra_data rx51_vibra_data __initdata = {
 	.coexist	= 0,
 };
 
-struct twl4030_audio_data rx51_audio_data __initdata = {
+static struct twl4030_audio_data rx51_audio_data __initdata = {
 	.audio_mclk	= 26000000,
 	.vibra		= &rx51_vibra_data,
 };

arch/arm/mach-omap2/board-zoom-display.c

@@ -16,6 +16,7 @@
 #include <linux/spi/spi.h>
 #include <plat/mcspi.h>
 #include <video/omapdss.h>
+#include <mach/board-zoom.h>
 
 #define LCD_PANEL_RESET_GPIO_PROD	96
 #define LCD_PANEL_RESET_GPIO_PILOT	55

arch/arm/mach-omap2/common.h

@@ -134,8 +134,6 @@ void omap4_map_io(void);
 void ti81xx_map_io(void);
 void omap_barriers_init(void);
 
-extern void __init omap_init_consistent_dma_size(void);
-
 /**
  * omap_test_timeout - busy-loop, testing a condition
  * @cond: condition to test until it evaluates to true

arch/arm/mach-omap2/devices.c

@@ -42,7 +42,6 @@
 
 static int __init omap3_l3_init(void)
 {
-	int l;
 	struct omap_hwmod *oh;
 	struct platform_device *pdev;
 	char oh_name[L3_MODULES_MAX_LEN];
@@ -54,7 +53,7 @@ static int __init omap3_l3_init(void)
 	if (!(cpu_is_omap34xx()))
 		return -ENODEV;
 
-	l = snprintf(oh_name, L3_MODULES_MAX_LEN, "l3_main");
+	snprintf(oh_name, L3_MODULES_MAX_LEN, "l3_main");
 
 	oh = omap_hwmod_lookup(oh_name);
 
@@ -72,7 +71,7 @@ postcore_initcall(omap3_l3_init);
 
 static int __init omap4_l3_init(void)
 {
-	int l, i;
+	int i;
 	struct omap_hwmod *oh[3];
 	struct platform_device *pdev;
 	char oh_name[L3_MODULES_MAX_LEN];
@@ -89,7 +88,7 @@ static int __init omap4_l3_init(void)
 		return -ENODEV;
 
 	for (i = 0; i < L3_MODULES; i++) {
-		l = snprintf(oh_name, L3_MODULES_MAX_LEN, "l3_main_%d", i+1);
+		snprintf(oh_name, L3_MODULES_MAX_LEN, "l3_main_%d", i+1);
 
 		oh[i] = omap_hwmod_lookup(oh_name);
 		if (!(oh[i]))

arch/arm/mach-omap2/gpio.c

@@ -58,7 +58,7 @@ static int __init omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused)
 	pdata->virtual_irq_start = IH_GPIO_BASE + 32 * (id - 1);
 	pdata->get_context_loss_count = omap_pm_get_dev_context_loss_count;
 	pdata->regs = kzalloc(sizeof(struct omap_gpio_reg_offs), GFP_KERNEL);
-	if (!pdata) {
+	if (!pdata->regs) {
 		pr_err("gpio%d: Memory allocation failed\n", id);
 		return -ENOMEM;
 	}

arch/arm/mach-omap2/gpmc-onenand.c

@@ -176,7 +176,7 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg,
 	const int t_wpl  = 40;
 	const int t_wph  = 30;
 	int min_gpmc_clk_period, t_ces, t_avds, t_avdh, t_ach, t_aavdh, t_rdyo;
-	int tick_ns, div, fclk_offset_ns, fclk_offset, gpmc_clk_ns, latency;
+	int div, fclk_offset_ns, fclk_offset, gpmc_clk_ns, latency;
 	int first_time = 0, hf = 0, vhf = 0, sync_read = 0, sync_write = 0;
 	int err, ticks_cez;
 	int cs = cfg->cs, freq = *freq_ptr;
@@ -240,7 +240,6 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg,
 		break;
 	}
 
-	tick_ns = gpmc_ticks_to_ns(1);
 	div = gpmc_cs_calc_divider(cs, min_gpmc_clk_period);
 	gpmc_clk_ns = gpmc_ticks_to_ns(div);
 	if (gpmc_clk_ns < 15) /* >66Mhz */

arch/arm/mach-omap2/gpmc.c

@@ -755,8 +755,7 @@ static int __init gpmc_init(void)
 		irq++;
 	}
 
-	ret = request_irq(gpmc_irq,
-			gpmc_handle_irq, IRQF_SHARED, "gpmc", gpmc_base);
+	ret = request_irq(gpmc_irq, gpmc_handle_irq, IRQF_SHARED, "gpmc", NULL);
 	if (ret)
 		pr_err("gpmc: irq-%d could not claim: err %d\n",
 						gpmc_irq, ret);

arch/arm/mach-omap2/hwspinlock.c

@@ -28,7 +28,7 @@ static struct hwspinlock_pdata omap_hwspinlock_pdata __initdata = {
 	.base_id = 0,
 };
 
-int __init hwspinlocks_init(void)
+static int __init hwspinlocks_init(void)
 {
 	int retval = 0;
 	struct omap_hwmod *oh;

arch/arm/mach-omap2/io.c

@@ -31,6 +31,7 @@
 #include <plat/omap-pm.h>
 #include <plat/omap_hwmod.h>
 #include <plat/multi.h>
+#include <plat/dma.h>
 
 #include "iomap.h"
 #include "voltage.h"

arch/arm/mach-omap2/irq.c

@@ -25,6 +25,7 @@
 #include <mach/hardware.h>
 
 #include "iomap.h"
+#include "common.h"
 
 /* selected INTC register offsets */
 
@@ -334,7 +335,7 @@ void omap_intc_restore_context(void)
 void omap3_intc_suspend(void)
 {
 	/* A pending interrupt would prevent OMAP from entering suspend */
-	omap_ack_irq(0);
+	omap_ack_irq(NULL);
 }
 
 void omap3_intc_prepare_idle(void)

arch/arm/mach-omap2/mux.c

@@ -247,7 +247,7 @@ int __init omap_mux_init_signal(const char *muxname, int val)
 	int mux_mode;
 
 	mux_mode = omap_mux_get_by_name(muxname, &partition, &mux);
-	if (mux_mode < 0)
+	if (mux_mode < 0 || !mux)
 		return mux_mode;
 
 	old_mode = omap_mux_read(partition, mux->reg_offset);

arch/arm/mach-omap2/omap-secure.c

@@ -18,6 +18,7 @@
 #include <asm/cacheflush.h>
 #include <asm/memblock.h>
 
+#include <plat/omap-secure.h>
 #include <mach/omap-secure.h>
 
 static phys_addr_t omap_secure_memblock_base;

arch/arm/mach-omap2/omap-wakeupgen.c

@@ -259,7 +259,7 @@ static void irq_save_context(void)
 /*
  * Clear WakeupGen SAR backup status.
  */
-void irq_sar_clear(void)
+static void irq_sar_clear(void)
 {
 	u32 val;
 	val = __raw_readl(sar_base + SAR_BACKUP_STATUS_OFFSET);

arch/arm/mach-omap2/pm24xx.c

@@ -171,8 +171,6 @@ static int omap2_allow_mpu_retention(void)
 
 static void omap2_enter_mpu_retention(void)
 {
-	int only_idle = 0;
-
 	/* Putting MPU into the WFI state while a transfer is active
 	 * seems to cause the I2C block to timeout. Why? Good question. */
 	if (omap2_i2c_active())
@@ -195,7 +193,6 @@ static void omap2_enter_mpu_retention(void)
 
 		omap2_prm_write_mod_reg(OMAP_LOGICRETSTATE_MASK, MPU_MOD,
 						 OMAP2_PM_PWSTCTRL);
-		only_idle = 1;
 	}
 
 	omap2_sram_idle();

arch/arm/mach-omap2/pm34xx.c

@@ -273,7 +273,7 @@ void omap_sram_idle(void)
 	int per_next_state = PWRDM_POWER_ON;
 	int core_next_state = PWRDM_POWER_ON;
 	int per_going_off;
-	int core_prev_state, per_prev_state;
+	int core_prev_state;
 	u32 sdrc_pwr = 0;
 
 	mpu_next_state = pwrdm_read_next_pwrst(mpu_pwrdm);
@@ -375,10 +375,8 @@ void omap_sram_idle(void)
 	pwrdm_post_transition();
 
 	/* PER */
-	if (per_next_state < PWRDM_POWER_ON) {
-		per_prev_state = pwrdm_read_prev_pwrst(per_pwrdm);
+	if (per_next_state < PWRDM_POWER_ON)
 		omap2_gpio_resume_after_idle();
-	}
 
 	/* Disable IO-PAD and IO-CHAIN wakeup */
 	if (omap3_has_io_wakeup() &&
@@ -702,7 +700,7 @@ static void __init pm_errata_configure(void)
 static int __init omap3_pm_init(void)
 {
 	struct power_state *pwrst, *tmp;
-	struct clockdomain *neon_clkdm, *per_clkdm, *mpu_clkdm, *core_clkdm;
+	struct clockdomain *neon_clkdm, *mpu_clkdm;
 	int ret;
 
 	if (!cpu_is_omap34xx())
@@ -757,8 +755,6 @@ static int __init omap3_pm_init(void)
 
 	neon_clkdm = clkdm_lookup("neon_clkdm");
 	mpu_clkdm = clkdm_lookup("mpu_clkdm");
-	per_clkdm = clkdm_lookup("per_clkdm");
-	core_clkdm = clkdm_lookup("core_clkdm");
 
 #ifdef CONFIG_SUSPEND
 	omap_pm_suspend = omap3_pm_suspend;

arch/arm/mach-omap2/prm_common.c

@@ -237,7 +237,7 @@ void omap_prcm_irq_complete(void)
  */
 int omap_prcm_register_chain_handler(struct omap_prcm_irq_setup *irq_setup)
 {
-	int nr_regs = irq_setup->nr_regs;
+	int nr_regs;
 	u32 mask[OMAP_PRCM_MAX_NR_PENDING_REG];
 	int offset, i;
 	struct irq_chip_generic *gc;
@@ -246,6 +246,8 @@ int omap_prcm_register_chain_handler(struct omap_prcm_irq_setup *irq_setup)
 	if (!irq_setup)
 		return -EINVAL;
 
+	nr_regs = irq_setup->nr_regs;
+
 	if (prcm_irq_setup) {
 		pr_err("PRCM: already initialized; won't reinitialize\n");
 		return -EINVAL;

arch/arm/mach-omap2/serial.c

@@ -243,7 +243,7 @@ static void omap_serial_fill_default_pads(struct omap_board_data *bdata)
 static void omap_serial_fill_default_pads(struct omap_board_data *bdata) {}
 #endif
 
-char *cmdline_find_option(char *str)
+static char *cmdline_find_option(char *str)
 {
 	extern char *saved_command_line;
 

arch/arm/mach-omap2/usb-tusb6010.c

@@ -126,7 +126,7 @@ static int tusb_set_sync_mode(unsigned sysclk_ps, unsigned fclk_ps)
 	tmp = (t.sync_clk + fclk_ps - 1) / fclk_ps;
 	if (tmp > 4)
 		return -ERANGE;
-	if (tmp <= 0)
+	if (tmp == 0)
 		tmp = 1;
 	t.page_burst_access = (fclk_ps * tmp) / 1000;
 

arch/arm/plat-omap/Makefile

@@ -9,9 +9,6 @@ obj-m :=
 obj-n :=
 obj-  :=
 
-# OCPI interconnect support for 1710, 1610 and 5912
-obj-$(CONFIG_ARCH_OMAP16XX) += ocpi.o
-
 # omap_device support (OMAP2+ only at the moment)
 obj-$(CONFIG_ARCH_OMAP2) += omap_device.o
 obj-$(CONFIG_ARCH_OMAP3) += omap_device.o

arch/arm/plat-omap/common.c

@@ -20,6 +20,7 @@
 #include <plat/board.h>
 #include <plat/vram.h>
 #include <plat/dsp.h>
+#include <plat/dma.h>
 
 #include <plat/omap-secure.h>
 

arch/arm/plat-omap/dma.c

@@ -41,6 +41,15 @@
 
 #include <plat/tc.h>
 
+/*
+ * MAX_LOGICAL_DMA_CH_COUNT: the maximum number of logical DMA
+ * channels that an instance of the SDMA IP block can support.  Used
+ * to size arrays.  (The actual maximum on a particular SoC may be less
+ * than this -- for example, OMAP1 SDMA instances only support 17 logical
+ * DMA channels.)
+ */
+#define MAX_LOGICAL_DMA_CH_COUNT		32
+
 #undef DEBUG
 
 #ifndef CONFIG_ARCH_OMAP1
@@ -883,7 +892,7 @@ void omap_start_dma(int lch)
 
 	if (!omap_dma_in_1510_mode() && dma_chan[lch].next_lch != -1) {
 		int next_lch, cur_lch;
-		char dma_chan_link_map[dma_lch_count];
+		char dma_chan_link_map[MAX_LOGICAL_DMA_CH_COUNT];
 
 		dma_chan_link_map[lch] = 1;
 		/* Set the link register of the first channel */
@@ -967,7 +976,7 @@ void omap_stop_dma(int lch)
 
 	if (!omap_dma_in_1510_mode() && dma_chan[lch].next_lch != -1) {
 		int next_lch, cur_lch = lch;
-		char dma_chan_link_map[dma_lch_count];
+		char dma_chan_link_map[MAX_LOGICAL_DMA_CH_COUNT];
 
 		memset(dma_chan_link_map, 0, sizeof(dma_chan_link_map));
 		do {

arch/arm/plat-omap/dmtimer.c

@@ -349,11 +349,12 @@ EXPORT_SYMBOL_GPL(omap_dm_timer_start);
 int omap_dm_timer_stop(struct omap_dm_timer *timer)
 {
 	unsigned long rate = 0;
-	struct dmtimer_platform_data *pdata = timer->pdev->dev.platform_data;
+	struct dmtimer_platform_data *pdata;
 
 	if (unlikely(!timer))
 		return -EINVAL;
 
+	pdata = timer->pdev->dev.platform_data;
 	if (!pdata->needs_manual_reset)
 		rate = clk_get_rate(timer->fclk);
 

arch/arm/plat-omap/include/plat/board.h

@@ -91,6 +91,8 @@ struct omap_usb_config {
 	u32 (*usb0_init)(unsigned nwires, unsigned is_device);
 	u32 (*usb1_init)(unsigned nwires);
 	u32 (*usb2_init)(unsigned nwires, unsigned alt_pingroup);
+
+	int (*ocpi_enable)(void);
 };
 
 struct omap_lcd_config {

arch/arm/plat-omap/include/plat/common.h

@@ -32,6 +32,8 @@
 
 extern int __init omap_init_clocksource_32k(void);
 
+extern void __init omap_check_revision(void);
+
 extern void omap_reserve(void);
 extern int omap_dss_reset(struct omap_hwmod *);
 

arch/arm/plat-omap/include/plat/dma.h

@@ -442,6 +442,7 @@ struct omap_system_dma_plat_info {
 	u32 (*dma_read)(int reg, int lch);
 };
 
+extern void __init omap_init_consistent_dma_size(void);
 extern void omap_set_dma_priority(int lch, int dst_port, int priority);
 extern int omap_request_dma(int dev_id, const char *dev_name,
 			void (*callback)(int lch, u16 ch_status, void *data),

arch/arm/plat-omap/include/plat/dmtimer.h

@@ -316,12 +316,12 @@ static inline void __omap_dm_timer_init_regs(struct omap_dm_timer *timer)
 				OMAP_TIMER_V1_SYS_STAT_OFFSET;
 		timer->irq_stat = timer->io_base + OMAP_TIMER_V1_STAT_OFFSET;
 		timer->irq_ena = timer->io_base + OMAP_TIMER_V1_INT_EN_OFFSET;
-		timer->irq_dis = 0;
+		timer->irq_dis = NULL;
 		timer->pend = timer->io_base + _OMAP_TIMER_WRITE_PEND_OFFSET;
 		timer->func_base = timer->io_base;
 	} else {
 		timer->revision = 2;
-		timer->sys_stat = 0;
+		timer->sys_stat = NULL;
 		timer->irq_stat = timer->io_base + OMAP_TIMER_V2_IRQSTATUS;
 		timer->irq_ena = timer->io_base + OMAP_TIMER_V2_IRQENABLE_SET;
 		timer->irq_dis = timer->io_base + OMAP_TIMER_V2_IRQENABLE_CLR;

arch/arm/plat-omap/omap_device.c

@@ -475,13 +475,11 @@ static int omap_device_count_resources(struct omap_device *od)
 static int omap_device_fill_resources(struct omap_device *od,
 				      struct resource *res)
 {
-	int c = 0;
 	int i, r;
 
 	for (i = 0; i < od->hwmods_cnt; i++) {
 		r = omap_hwmod_fill_resources(od->hwmods[i], res);
 		res += r;
-		c += r;
 	}
 
 	return 0;

arch/arm/plat-omap/sram.c

@@ -196,8 +196,8 @@ static void __init omap_map_sram(void)
 	 * Looks like we need to preserve some bootloader code at the
 	 * beginning of SRAM for jumping to flash for reboot to work...
 	 */
-	memset((void *)omap_sram_base + SRAM_BOOTLOADER_SZ, 0,
-	       omap_sram_size - SRAM_BOOTLOADER_SZ);
+	memset_io(omap_sram_base + SRAM_BOOTLOADER_SZ, 0,
+		  omap_sram_size - SRAM_BOOTLOADER_SZ);
 }
 
 /*

arch/arm/plat-omap/usb.c

@@ -31,8 +31,6 @@
 
 #include <mach/hardware.h>
 
-#include "../mach-omap2/common.h"
-
 #ifdef	CONFIG_ARCH_OMAP_OTG
 
 void __init
@@ -138,8 +136,6 @@ omap_otg_init(struct omap_usb_config *config)
 #endif
 	pr_debug("OTG_SYSCON_1 = %08x\n", omap_readl(OTG_SYSCON_1));
 	omap_writel(syscon, OTG_SYSCON_1);
-
-	status = 0;
 }
 
 #else

drivers/usb/host/ohci-omap.c

@@ -205,8 +205,9 @@ static int ohci_omap_init(struct usb_hcd *hcd)
 	need_transceiver = need_transceiver
 			|| machine_is_omap_h2() || machine_is_omap_h3();
 
-	if (cpu_is_omap16xx())
-		ocpi_enable();
+	/* XXX OMAP16xx only */
+	if (config->ocpi_enable)
+		config->ocpi_enable();
 
 #ifdef	CONFIG_USB_OTG
 	if (need_transceiver) {