Merge branch 'next' of git://git.denx.de/u-boot-avr32

Conflicts:

	MAINTAINERS

CREDITS

@@ -217,6 +217,10 @@ H: Rich Ireland
 E: r.ireland@computer.org
 D: FPGA device configuration driver
 
+H: Mark Jackson
+E: mpfj@mimc.co.uk
+D: Port to MIMC200 board
+
 N: Gary Jennejohn
 E: garyj@jennejohn.org, gj@denx.de
 D: Support for Samsung ARM920T S3C2400X, ARM920T "TRAB"

MAINTAINERS

@@ -712,7 +712,20 @@ TsiChung Liew <Tsi-Chung.Liew@freescale.com>
 #	Board		CPU						#
 #########################################################################
 
-Haavard Skinnemoen <hskinnemoen@atmel.com>
+Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
+
+	FAVR-32-EZKIT		AT32AP7000
+
+Mark Jackson <mpfj@mimc.co.uk>
+
+	MIMC200			AT32AP7000
+
+Alex Raimondi <alex.raimondi@miromico.ch>
+Julien May <julien.may@miromico.ch>
+
+	HAMMERHEAD		AT32AP7000
+
+Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
 
 	ATSTK1000	AT32AP7xxx
 	ATSTK1002	AT32AP7000

MAKEALL

@@ -719,6 +719,9 @@ LIST_avr32="		\
 	atstk1004	\
 	atstk1006	\
 	atngw100	\
+	favr-32-ezkit	\
+	hammerhead	\
+	mimc200		\
 "
 
 #########################################################################

Makefile

@@ -2973,6 +2973,15 @@ atstk1004_config	:	unconfig
 atstk1006_config	:	unconfig
 	@$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x
 
+favr-32-ezkit_config	:	unconfig
+	@$(MKCONFIG) $(@:_config=) avr32 at32ap favr-32-ezkit earthlcd at32ap700x
+
+hammerhead_config	:	unconfig
+	@$(MKCONFIG) $(@:_config=) avr32 at32ap hammerhead miromico at32ap700x
+
+mimc200_config		:	unconfig
+	@$(MKCONFIG) $(@:_config=) avr32 at32ap mimc200 mimc at32ap700x
+
 #========================================================================
 # SH3 (SuperH)
 #========================================================================

board/atmel/atngw100/Makefile

@@ -22,7 +22,7 @@ include $(TOPDIR)/config.mk
 
 LIB	:= $(obj)lib$(BOARD).a
 
-COBJS	:= $(BOARD).o eth.o
+COBJS	:= $(BOARD).o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))

board/atmel/atngw100/atngw100.c

@@ -93,6 +93,17 @@ void board_init_info(void)
 	gd->bd->bi_phy_id[1] = 0x03;
 }
 
+extern int macb_eth_initialize(int id, void *regs, unsigned int phy_addr);
+
+#ifdef CONFIG_CMD_NET
+int board_eth_init(bd_t *bi)
+{
+	macb_eth_initialize(0, (void *)MACB0_BASE, bi->bi_phy_id[0]);
+	macb_eth_initialize(1, (void *)MACB1_BASE, bi->bi_phy_id[1]);
+	return 0;
+}
+#endif
+
 /* SPI chip select control */
 #ifdef CONFIG_ATMEL_SPI
 #include <spi.h>

board/atmel/atstk1000/Makefile

@@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk
 
 LIB	:= $(obj)lib$(BOARD).a
 
-COBJS	:= $(BOARD).o flash.o eth.o
+COBJS	:= $(BOARD).o flash.o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))

board/atmel/atstk1000/atstk1000.c

@@ -115,3 +115,14 @@ void board_init_info(void)
 	gd->bd->bi_phy_id[0] = 0x10;
 	gd->bd->bi_phy_id[1] = 0x11;
 }
+
+extern int macb_eth_initialize(int id, void *regs, unsigned int phy_addr);
+
+#ifdef CONFIG_CMD_NET
+int board_eth_init(bd_t *bi)
+{
+	macb_eth_initialize(0, (void *)MACB0_BASE, bi->bi_phy_id[0]);
+	macb_eth_initialize(1, (void *)MACB1_BASE, bi->bi_phy_id[1]);
+	return 0;
+}
+#endif

board/earthlcd/favr-32-ezkit/Makefile

@@ -0,0 +1,42 @@
+#
+# (C) Copyright 2001-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# Copyright (C) 2008 Atmel Corporation
+#
+# See file CREDITS for list of people who contributed to this project.
+#
+# This program is free software; you can redistribute it and/or modify it under
+# the terms of the GNU General Public License as published by the Free Software
+# Foundation; either version 2 of the License, or (at your option) any later
+# version.
+#
+# This program is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+# FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more
+# details.
+#
+# You should have received a copy of the GNU General Public License along with
+# this program; if not, write to the Free Software Foundation, Inc., 59 Temple
+# Place, Suite 330, Boston, MA 02111-1307 USA
+
+include $(TOPDIR)/config.mk
+
+LIB	:= $(obj)lib$(BOARD).a
+
+COBJS	:= $(BOARD).o flash.o
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS)
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################

board/earthlcd/favr-32-ezkit/config.mk

@@ -0,0 +1,4 @@
+PLATFORM_RELFLAGS	+= -ffunction-sections -fdata-sections
+PLATFORM_LDFLAGS	+= --gc-sections
+TEXT_BASE		= 0x00000000
+LDSCRIPT		= $(obj)board/earthlcd/favr-32-ezkit/u-boot.lds

board/earthlcd/favr-32-ezkit/favr-32-ezkit.c

@@ -0,0 +1,96 @@
+/*
+ * Copyright (C) 2008 Atmel Corporation
+ *
+ * See file CREDITS for list of people who contributed to this project.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
+ * Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#include <common.h>
+
+#include <asm/io.h>
+#include <asm/sdram.h>
+#include <asm/arch/clk.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/hmatrix.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static const struct sdram_config sdram_config = {
+	/* MT48LC4M32B2P-6 (16 MB) */
+	.data_bits	= SDRAM_DATA_32BIT,
+	.row_bits	= 12,
+	.col_bits	= 8,
+	.bank_bits	= 2,
+	.cas		= 3,
+	.twr		= 2,
+	.trc		= 7,
+	.trp		= 2,
+	.trcd		= 2,
+	.tras		= 5,
+	.txsr		= 5,
+	/* 15.6 us */
+	.refresh_period	= (156 * (SDRAMC_BUS_HZ / 1000)) / 10000,
+};
+
+int board_early_init_f(void)
+{
+	/* Enable SDRAM in the EBI mux */
+	hmatrix_slave_write(EBI, SFR, HMATRIX_BIT(EBI_SDRAM_ENABLE));
+
+	gpio_enable_ebi();
+	gpio_enable_usart3();
+#if defined(CONFIG_MACB)
+	gpio_enable_macb0();
+#endif
+#if defined(CONFIG_MMC)
+	gpio_enable_mmci();
+#endif
+
+	return 0;
+}
+
+phys_size_t initdram(int board_type)
+{
+	unsigned long expected_size;
+	unsigned long actual_size;
+	void *sdram_base;
+
+	sdram_base = map_physmem(EBI_SDRAM_BASE, EBI_SDRAM_SIZE, MAP_NOCACHE);
+
+	expected_size = sdram_init(sdram_base, &sdram_config);
+	actual_size = get_ram_size(sdram_base, expected_size);
+
+	unmap_physmem(sdram_base, EBI_SDRAM_SIZE);
+
+	if (expected_size != actual_size)
+		printf("Warning: Only %lu of %lu MiB SDRAM is working\n",
+				actual_size >> 20, expected_size >> 20);
+
+	return actual_size;
+}
+
+void board_init_info(void)
+{
+	gd->bd->bi_phy_id[0] = 0x01;
+}
+
+#if defined(CONFIG_MACB) && defined(CONFIG_CMD_NET)
+extern int macb_eth_initialize(int id, void *regs, unsigned int phy_addr);
+
+int board_eth_init(bd_t *bi)
+{
+	return macb_eth_initialize(0, (void *)MACB0_BASE, bi->bi_phy_id[0]);
+}
+#endif

board/earthlcd/favr-32-ezkit/flash.c

@@ -0,0 +1,230 @@
+/*
+ * Copyright (C) 2008 Atmel Corporation
+ *
+ * See file CREDITS for list of people who contributed to this project.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
+ * Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#include <common.h>
+
+#ifdef CONFIG_FAVR32_EZKIT_EXT_FLASH
+#include <asm/cacheflush.h>
+#include <asm/io.h>
+#include <asm/sections.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+flash_info_t flash_info[1];
+
+static void flash_identify(uint16_t *flash, flash_info_t *info)
+{
+	unsigned long flags;
+
+	flags = disable_interrupts();
+
+	dcache_flush_unlocked();
+
+	writew(0xaa, flash + 0x555);
+	writew(0x55, flash + 0xaaa);
+	writew(0x90, flash + 0x555);
+	info->flash_id = readl(flash);
+	writew(0xff, flash);
+
+	readw(flash);
+
+	if (flags)
+		enable_interrupts();
+}
+
+unsigned long flash_init(void)
+{
+	unsigned long addr;
+	unsigned int i;
+
+	flash_info[0].size = CFG_FLASH_SIZE;
+	flash_info[0].sector_count = 135;
+
+	flash_identify(uncached((void *)CFG_FLASH_BASE), &flash_info[0]);
+
+	for (i = 0, addr = 0; i < 8; i++, addr += 0x2000)
+		flash_info[0].start[i] = addr;
+	for (; i < flash_info[0].sector_count; i++, addr += 0x10000)
+		flash_info[0].start[i] = addr;
+
+	return CFG_FLASH_SIZE;
+}
+
+void flash_print_info(flash_info_t *info)
+{
+	printf("Flash: Vendor ID: 0x%02lx, Product ID: 0x%02lx\n",
+	       info->flash_id >> 16, info->flash_id & 0xffff);
+	printf("Size: %ld MB in %d sectors\n",
+	       info->size >> 10, info->sector_count);
+}
+
+int flash_erase(flash_info_t *info, int s_first, int s_last)
+{
+	unsigned long flags;
+	unsigned long start_time;
+	uint16_t *fb, *sb;
+	unsigned int i;
+	int ret;
+	uint16_t status;
+
+	if ((s_first < 0) || (s_first > s_last)
+	    || (s_last >= info->sector_count)) {
+		puts("Error: first and/or last sector out of range\n");
+		return ERR_INVAL;
+	}
+
+	for (i = s_first; i < s_last; i++)
+		if (info->protect[i]) {
+			printf("Error: sector %d is protected\n", i);
+			return ERR_PROTECTED;
+		}
+
+	fb = (uint16_t *)uncached(info->start[0]);
+
+	dcache_flush_unlocked();
+
+	for (i = s_first; (i <= s_last) && !ctrlc(); i++) {
+		printf("Erasing sector %3d...", i);
+
+		sb = (uint16_t *)uncached(info->start[i]);
+
+		flags = disable_interrupts();
+
+		start_time = get_timer(0);
+
+		/* Unlock sector */
+		writew(0xaa, fb + 0x555);
+		writew(0x70, sb);
+
+		/* Erase sector */
+		writew(0xaa, fb + 0x555);
+		writew(0x55, fb + 0xaaa);
+		writew(0x80, fb + 0x555);
+		writew(0xaa, fb + 0x555);
+		writew(0x55, fb + 0xaaa);
+		writew(0x30, sb);
+
+		/* Wait for completion */
+		ret = ERR_OK;
+		do {
+			/* TODO: Timeout */
+			status = readw(sb);
+		} while ((status != 0xffff) && !(status & 0x28));
+
+		writew(0xf0, fb);
+
+		/*
+		 * Make sure the command actually makes it to the bus
+		 * before we re-enable interrupts.
+		 */
+		readw(fb);
+
+		if (flags)
+			enable_interrupts();
+
+		if (status != 0xffff) {
+			printf("Flash erase error at address 0x%p: 0x%02x\n",
+			       sb, status);
+			ret = ERR_PROG_ERROR;
+			break;
+		}
+	}
+
+	if (ctrlc())
+		printf("User interrupt!\n");
+
+	return ERR_OK;
+}
+
+int write_buff(flash_info_t *info, uchar *src,
+			   ulong addr, ulong count)
+{
+	unsigned long flags;
+	uint16_t *base, *p, *s, *end;
+	uint16_t word, status, status1;
+	int ret = ERR_OK;
+
+	if (addr < info->start[0]
+	    || (addr + count) > (info->start[0] + info->size)
+	    || (addr + count) < addr) {
+		puts("Error: invalid address range\n");
+		return ERR_INVAL;
+	}
+
+	if (addr & 1 || count & 1 || (unsigned int)src & 1) {
+		puts("Error: misaligned source, destination or count\n");
+		return ERR_ALIGN;
+	}
+
+	base = (uint16_t *)uncached(info->start[0]);
+	end = (uint16_t *)uncached(addr + count);
+
+	flags = disable_interrupts();
+
+	dcache_flush_unlocked();
+	sync_write_buffer();
+
+	for (p = (uint16_t *)uncached(addr), s = (uint16_t *)src;
+	     p < end && !ctrlc(); p++, s++) {
+		word = *s;
+
+		writew(0xaa, base + 0x555);
+		writew(0x55, base + 0xaaa);
+		writew(0xa0, base + 0x555);
+		writew(word, p);
+
+		sync_write_buffer();
+
+		/* Wait for completion */
+		status1 = readw(p);
+		do {
+			/* TODO: Timeout */
+			status = status1;
+			status1 = readw(p);
+		} while (((status ^ status1) & 0x40)	/* toggled */
+			 && !(status1 & 0x28));		/* error bits */
+
+		/*
+		 * We'll need to check once again for toggle bit
+		 * because the toggle bit may stop toggling as I/O5
+		 * changes to "1" (ref at49bv642.pdf p9)
+		 */
+		status1 = readw(p);
+		status = readw(p);
+		if ((status ^ status1) & 0x40) {
+			printf("Flash write error at address 0x%p: "
+			       "0x%02x != 0x%02x\n",
+			       p, status,word);
+			ret = ERR_PROG_ERROR;
+			writew(0xf0, base);
+			readw(base);
+			break;
+		}
+
+		writew(0xf0, base);
+		readw(base);
+	}
+
+	if (flags)
+		enable_interrupts();
+
+	return ret;
+}
+
+#endif /* CONFIG_FAVR32_EZKIT_EXT_FLASH */

board/earthlcd/favr-32-ezkit/u-boot.lds

@@ -0,0 +1,71 @@
+/* -*- Fundamental -*-
+ *
+ * Copyright (C) 2008 Atmel Corporation
+ *
+ * See file CREDITS for list of people who contributed to this project.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
+ * Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+OUTPUT_FORMAT("elf32-avr32", "elf32-avr32", "elf32-avr32")
+OUTPUT_ARCH(avr32)
+ENTRY(_start)
+
+SECTIONS
+{
+	. = 0;
+	_text = .;
+	.text : {
+		*(.exception.text)
+		*(.text)
+		*(.text.*)
+	}
+	_etext = .;
+
+	.rodata : {
+		*(.rodata)
+		*(.rodata.*)
+	}
+
+	. = ALIGN(8);
+	_data = .;
+	.data : {
+		*(.data)
+		*(.data.*)
+	}
+
+	. = ALIGN(4);
+	__u_boot_cmd_start = .;
+	.u_boot_cmd : {
+		KEEP(*(.u_boot_cmd))
+	}
+	__u_boot_cmd_end = .;
+
+	. = ALIGN(4);
+	_got = .;
+	.got : {
+		*(.got)
+	}
+	_egot = .;
+
+	. = ALIGN(8);
+	_edata = .;
+
+	.bss (NOLOAD) : {
+		*(.bss)
+		*(.bss.*)
+	}
+	. = ALIGN(8);
+	_end = .;
+}

board/mimc/mimc200/Makefile

@@ -0,0 +1,40 @@
+#
+# Copyright (C) 2005-2006 Atmel Corporation
+#
+# See file CREDITS for list of people who contributed to this project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+
+include $(TOPDIR)/config.mk
+
+LIB	:= $(obj)lib$(BOARD).a
+
+COBJS	:= $(BOARD).o
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS)
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################

board/mimc/mimc200/config.mk

@@ -0,0 +1,3 @@
+TEXT_BASE		= 0x00000000
+PLATFORM_RELFLAGS	+= -ffunction-sections -fdata-sections
+PLATFORM_LDFLAGS	+= --gc-sections

board/mimc/mimc200/mimc200.c

@@ -0,0 +1,207 @@
+/*
+ * Copyright (C) 2006 Atmel Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+
+#include <asm/io.h>
+#include <asm/sdram.h>
+#include <asm/arch/clk.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/hmatrix.h>
+#include <lcd.h>
+
+#define SM_PM_GCCTRL				0x0060
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static const struct sdram_config sdram_config = {
+	.data_bits	= SDRAM_DATA_16BIT,
+	.row_bits	= 13,
+	.col_bits	= 9,
+	.bank_bits	= 2,
+	.cas		= 3,
+	.twr		= 2,
+	.trc		= 6,
+	.trp		= 2,
+	.trcd		= 2,
+	.tras		= 6,
+	.txsr		= 6,
+	/* 15.6 us */
+	.refresh_period	= (156 * (SDRAMC_BUS_HZ / 1000)) / 10000,
+};
+
+int board_early_init_f(void)
+{
+	/* Enable SDRAM in the EBI mux */
+	hmatrix_slave_write(EBI, SFR, HMATRIX_BIT(EBI_SDRAM_ENABLE));
+
+	gpio_enable_ebi();
+	gpio_enable_usart1();
+
+	/* enable higher address lines for larger flash devices */
+	gpio_select_periph_A(GPIO_PIN_PE16, 0);	/* ADDR23 */
+	gpio_select_periph_A(GPIO_PIN_PE17, 0);	/* ADDR24 */
+	gpio_select_periph_A(GPIO_PIN_PE18, 0);	/* ADDR25 */
+
+	/* enable data flash chip select */
+	gpio_select_periph_A(GPIO_PIN_PE25, 0);	/* NCS2 */
+
+	/* de-assert "force sys reset" pin */
+	gpio_set_value(GPIO_PIN_PD15, 1);	/* FORCE RESET	*/
+	gpio_select_pio(GPIO_PIN_PD15, GPIOF_OUTPUT);
+
+	/* init custom i/o */
+	/* cpu type inputs */
+	gpio_select_pio(GPIO_PIN_PE19, 0);
+	gpio_select_pio(GPIO_PIN_PE20, 0);
+	gpio_select_pio(GPIO_PIN_PE23, 0);
+	/* main board type inputs */
+	gpio_select_pio(GPIO_PIN_PB19, 0);
+	gpio_select_pio(GPIO_PIN_PB29, 0);
+	/* DEBUG input (use weak pullup) */
+	gpio_select_pio(GPIO_PIN_PE21, GPIOF_PULLUP);
+
+	/* are we suppressing the console ? */
+	if (gpio_get_value(GPIO_PIN_PE21) == 1)
+		gd->flags |= GD_FLG_SILENT;
+
+	/* reset phys */
+	gpio_select_pio(GPIO_PIN_PE24, 0);
+	gpio_set_value(GPIO_PIN_PC18, 1);	/* PHY RESET	*/
+	gpio_select_pio(GPIO_PIN_PC18, GPIOF_OUTPUT);
+
+	/* GCLK0 - 10MHz clock */
+	writel(0x00000004, (void *)SM_BASE + SM_PM_GCCTRL);
+	gpio_select_periph_A(GPIO_PIN_PA30, 0);
+
+	udelay(5000);
+
+	/* release phys reset */
+	gpio_set_value(GPIO_PIN_PC18, 0);	/* PHY RESET (Release)	*/
+
+#if defined(CONFIG_MACB)
+	/* init macb0 pins */
+	gpio_select_periph_A(GPIO_PIN_PC3,  0);	/* TXD0	*/
+	gpio_select_periph_A(GPIO_PIN_PC4,  0);	/* TXD1	*/
+	gpio_select_periph_A(GPIO_PIN_PC7,  0);	/* TXEN	*/
+	gpio_select_periph_A(GPIO_PIN_PC8,  0);	/* TXCK */
+	gpio_select_periph_A(GPIO_PIN_PC9,  0);	/* RXD0	*/
+	gpio_select_periph_A(GPIO_PIN_PC10, 0);	/* RXD1	*/
+	gpio_select_periph_A(GPIO_PIN_PC13, 0);	/* RXER	*/
+	gpio_select_periph_A(GPIO_PIN_PC15, 0);	/* RXDV	*/
+	gpio_select_periph_A(GPIO_PIN_PC16, 0);	/* MDC	*/
+	gpio_select_periph_A(GPIO_PIN_PC17, 0);	/* MDIO	*/
+#if !defined(CONFIG_RMII)
+	gpio_select_periph_A(GPIO_PIN_PC0,  0);	/* COL	*/
+	gpio_select_periph_A(GPIO_PIN_PC1,  0);	/* CRS	*/
+	gpio_select_periph_A(GPIO_PIN_PC2,  0);	/* TXER	*/
+	gpio_select_periph_A(GPIO_PIN_PC5,  0);	/* TXD2	*/
+	gpio_select_periph_A(GPIO_PIN_PC6,  0);	/* TXD3 */
+	gpio_select_periph_A(GPIO_PIN_PC11, 0);	/* RXD2	*/
+	gpio_select_periph_A(GPIO_PIN_PC12, 0);	/* RXD3	*/
+	gpio_select_periph_A(GPIO_PIN_PC14, 0);	/* RXCK	*/
+#endif
+
+	/* init macb1 pins */
+	gpio_select_periph_B(GPIO_PIN_PD13, 0);	/* TXD0	*/
+	gpio_select_periph_B(GPIO_PIN_PD14, 0);	/* TXD1	*/
+	gpio_select_periph_B(GPIO_PIN_PD11, 0);	/* TXEN	*/
+	gpio_select_periph_B(GPIO_PIN_PD12, 0);	/* TXCK */
+	gpio_select_periph_B(GPIO_PIN_PD10, 0);	/* RXD0	*/
+	gpio_select_periph_B(GPIO_PIN_PD6,  0);	/* RXD1	*/
+	gpio_select_periph_B(GPIO_PIN_PD5,  0);	/* RXER	*/
+	gpio_select_periph_B(GPIO_PIN_PD4,  0);	/* RXDV	*/
+	gpio_select_periph_B(GPIO_PIN_PD3,  0);	/* MDC	*/
+	gpio_select_periph_B(GPIO_PIN_PD2,  0);	/* MDIO	*/
+#if !defined(CONFIG_RMII)
+	gpio_select_periph_B(GPIO_PIN_PC19, 0);	/* COL	*/
+	gpio_select_periph_B(GPIO_PIN_PC23, 0);	/* CRS	*/
+	gpio_select_periph_B(GPIO_PIN_PC26, 0);	/* TXER	*/
+	gpio_select_periph_B(GPIO_PIN_PC27, 0);	/* TXD2	*/
+	gpio_select_periph_B(GPIO_PIN_PC28, 0);	/* TXD3 */
+	gpio_select_periph_B(GPIO_PIN_PC29, 0);	/* RXD2	*/
+	gpio_select_periph_B(GPIO_PIN_PC30, 0);	/* RXD3	*/
+	gpio_select_periph_B(GPIO_PIN_PC24, 0);	/* RXCK	*/
+#endif
+#endif
+
+#if defined(CONFIG_MMC)
+	gpio_enable_mmci();
+#endif
+
+	return 0;
+}
+
+phys_size_t initdram(int board_type)
+{
+	unsigned long expected_size;
+	unsigned long actual_size;
+	void *sdram_base;
+
+	sdram_base = map_physmem(EBI_SDRAM_BASE, EBI_SDRAM_SIZE, MAP_NOCACHE);
+
+	expected_size = sdram_init(sdram_base, &sdram_config);
+	actual_size = get_ram_size(sdram_base, expected_size);
+
+	unmap_physmem(sdram_base, EBI_SDRAM_SIZE);
+
+	if (expected_size != actual_size)
+		printf("Warning: Only %lu of %lu MiB SDRAM is working\n",
+				actual_size >> 20, expected_size >> 20);
+
+	return actual_size;
+}
+
+void board_init_info(void)
+{
+	gd->bd->bi_phy_id[0] = 0x01;
+	gd->bd->bi_phy_id[1] = 0x03;
+}
+
+/* SPI chip select control */
+#ifdef CONFIG_ATMEL_SPI
+#include <spi.h>
+
+int spi_cs_is_valid(unsigned int bus, unsigned int cs)
+{
+	return (bus == 0) && (cs == 0);
+}
+
+void spi_cs_activate(struct spi_slave *slave)
+{
+}
+
+void spi_cs_deactivate(struct spi_slave *slave)
+{
+}
+#endif /* CONFIG_ATMEL_SPI */
+
+#ifdef CONFIG_CMD_NET
+extern int macb_eth_initialize(int id, void *regs, unsigned int phy_addr);
+
+int board_eth_init(bd_t *bi)
+{
+	macb_eth_initialize(0, (void *)MACB0_BASE, bi->bi_phy_id[0]);
+	macb_eth_initialize(1, (void *)MACB1_BASE, bi->bi_phy_id[1]);
+
+	return 0;
+}
+#endif

board/atmel/atstk1000/eth.c → board/mimc/mimc200/u-boot.lds

@@ -1,7 +1,6 @@
-/*
- * Copyright (C) 2005-2006 Atmel Corporation
+/* -*- Fundamental -*-
  *
- * Ethernet initialization for the ATSTK1000 starterkit
+ * Copyright (C) 2005-2006 Atmel Corporation
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -21,18 +20,54 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  * MA 02111-1307 USA
  */
-#include <common.h>
+OUTPUT_FORMAT("elf32-avr32", "elf32-avr32", "elf32-avr32")
+OUTPUT_ARCH(avr32)
+ENTRY(_start)
 
-#include <asm/arch/memory-map.h>
+SECTIONS
+{
+	. = 0;
+	_text = .;
+	.text : {
+		*(.exception.text)
+		*(.text)
+		*(.text.*)
+	}
+	_etext = .;
 
-extern int macb_eth_initialize(int id, void *regs, unsigned int phy_addr);
+	.rodata : {
+		*(.rodata)
+		*(.rodata.*)
+	}
 
-#if defined(CONFIG_MACB) && defined(CONFIG_CMD_NET)
-void atstk1000_eth_initialize(bd_t *bi)
-{
-	int id = 0;
+	. = ALIGN(8);
+	_data = .;
+	.data : {
+		*(.data)
+		*(.data.*)
+	}
+
+	. = ALIGN(4);
+	__u_boot_cmd_start = .;
+	.u_boot_cmd : {
+		KEEP(*(.u_boot_cmd))
+	}
+	__u_boot_cmd_end = .;
+
+	. = ALIGN(4);
+	_got = .;
+	.got : {
+		*(.got)
+	}
+	_egot = .;
+
+	. = ALIGN(8);
+	_edata = .;
 
-	macb_eth_initialize(id++, (void *)MACB0_BASE, bi->bi_phy_id[0]);
-	macb_eth_initialize(id++, (void *)MACB1_BASE, bi->bi_phy_id[1]);
+	.bss : {
+		*(.bss)
+		*(.bss.*)
+	}
+	. = ALIGN(8);
+	_end = .;
 }
-#endif

board/miromico/hammerhead/Makefile

@@ -0,0 +1,40 @@
+#
+# Copyright (C) 2008 Miromico AG
+#
+# See file CREDITS for list of people who contributed to this project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+
+include $(TOPDIR)/config.mk
+
+LIB	:= $(obj)lib$(BOARD).a
+
+COBJS	:= $(BOARD).o
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS)
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################

board/miromico/hammerhead/config.mk

@@ -0,0 +1,3 @@
+TEXT_BASE		= 0x00000000
+PLATFORM_RELFLAGS	+= -ffunction-sections -fdata-sections
+PLATFORM_LDFLAGS	+= --gc-sections

board/miromico/hammerhead/hammerhead.c

@@ -0,0 +1,114 @@
+/*
+ * Copyright (C) 2008 Miromico AG
+ *
+ * Mostly copied form atmel ATNGW100 sources
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include "../cpu/at32ap/at32ap700x/sm.h"
+
+#include <common.h>
+
+#include <asm/io.h>
+#include <asm/sdram.h>
+#include <asm/arch/clk.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/hmatrix.h>
+#include <asm/arch/memory-map.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static const struct sdram_config sdram_config = {
+	.data_bits	= SDRAM_DATA_32BIT,
+	.row_bits	= 13,
+	.col_bits	= 9,
+	.bank_bits	= 2,
+	.cas		= 3,
+	.twr		= 2,
+	.trc		= 7,
+	.trp		= 2,
+	.trcd		= 2,
+	.tras		= 5,
+	.txsr		= 5,
+	/* 7.81 us */
+	.refresh_period	= (781 * (SDRAMC_BUS_HZ / 1000)) / 100000,
+};
+
+extern int macb_eth_initialize(int id, void *regs, unsigned int phy_addr);
+
+#ifdef CONFIG_CMD_NET
+int board_eth_init(bd_t *bis)
+{
+	return macb_eth_initialize(0, (void *)MACB0_BASE, bis->bi_phy_id[0]);
+}
+#endif
+
+int board_early_init_f(void)
+{
+	/* Enable SDRAM in the EBI mux */
+	hmatrix_slave_write(EBI, SFR, HMATRIX_BIT(EBI_SDRAM_ENABLE));
+
+	gpio_enable_ebi();
+	gpio_enable_usart1();
+
+#if defined(CONFIG_MACB)
+	gpio_enable_macb0();
+#endif
+#if defined(CONFIG_MMC)
+	gpio_enable_mmci();
+#endif
+	return 0;
+}
+
+phys_size_t initdram(int board_type)
+{
+	unsigned long expected_size;
+	unsigned long actual_size;
+	void *sdram_base;
+
+	sdram_base = map_physmem(EBI_SDRAM_BASE, EBI_SDRAM_SIZE, MAP_NOCACHE);
+
+	expected_size = sdram_init(sdram_base, &sdram_config);
+	actual_size = get_ram_size(sdram_base, expected_size);
+
+	unmap_physmem(sdram_base, EBI_SDRAM_SIZE);
+
+	if (expected_size != actual_size)
+		printf("Warning: Only %lu of %lu MiB SDRAM is working\n",
+		       actual_size >> 20, expected_size >> 20);
+
+	return actual_size;
+}
+
+void board_init_info(void)
+{
+	gd->bd->bi_phy_id[0] = 0x01;
+}
+
+void gclk_init(void)
+{
+	/* Hammerhead boards uses GCLK3 as 25MHz output to ethernet PHY */
+
+	/* Select GCLK3 peripheral function */
+	gpio_select_periph_A(GPIO_PIN_PB29, 0);
+
+	/* Enable GCLK3 with no input divider, from OSC0 (crystal) */
+	sm_writel(PM_GCCTRL(3), SM_BIT(CEN));
+}

board/atmel/atngw100/eth.c → board/miromico/hammerhead/u-boot.lds

@@ -1,7 +1,6 @@
-/*
- * Copyright (C) 2006 Atmel Corporation
+/* -*- Fundamental -*-
  *
- * Ethernet initialization for the AVR32 Network Gateway
+ * Copyright (C) 2005-2006 Atmel Corporation
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -21,16 +20,54 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  * MA 02111-1307 USA
  */
-#include <common.h>
+OUTPUT_FORMAT("elf32-avr32", "elf32-avr32", "elf32-avr32")
+OUTPUT_ARCH(avr32)
+ENTRY(_start)
 
-#include <asm/arch/memory-map.h>
+SECTIONS
+{
+	. = 0;
+	_text = .;
+	.text : {
+		*(.exception.text)
+		*(.text)
+		*(.text.*)
+	}
+	_etext = .;
 
-extern int macb_eth_initialize(int id, void *regs, unsigned int phy_addr);
+	.rodata : {
+		*(.rodata)
+		*(.rodata.*)
+	}
 
-#ifdef CONFIG_CMD_NET
-void atngw100_eth_initialize(bd_t *bi)
-{
-	macb_eth_initialize(0, (void *)MACB0_BASE, bi->bi_phy_id[0]);
-	macb_eth_initialize(1, (void *)MACB1_BASE, bi->bi_phy_id[1]);
+	. = ALIGN(8);
+	_data = .;
+	.data : {
+		*(.data)
+		*(.data.*)
+	}
+
+	. = ALIGN(4);
+	__u_boot_cmd_start = .;
+	.u_boot_cmd : {
+		KEEP(*(.u_boot_cmd))
+	}
+	__u_boot_cmd_end = .;
+
+	. = ALIGN(4);
+	_got = .;
+	.got : {
+		*(.got)
+	}
+	_egot = .;
+
+	. = ALIGN(8);
+	_edata = .;
+
+	.bss : {
+		*(.bss)
+		*(.bss.*)
+	}
+	. = ALIGN(8);
+	_end = .;
 }
-#endif

cpu/at32ap/at32ap700x/sm.h

@@ -21,7 +21,7 @@
 #define SM_PM_IMR				0x0048
 #define SM_PM_ISR				0x004c
 #define SM_PM_ICR				0x0050
-#define SM_PM_GCCTRL				0x0060
+#define SM_PM_GCCTRL(x)				(0x0060 + 4 * x)
 #define SM_RTC_CTRL				0x0080
 #define SM_RTC_VAL				0x0084
 #define SM_RTC_TOP				0x0088

cpu/at32ap/cpu.c

@@ -65,6 +65,9 @@ int cpu_init(void)
 	sysreg_write(EVBA, (unsigned long)&_evba);
 	asm volatile("csrf	%0" : : "i"(SYSREG_EM_OFFSET));
 
+	if(gclk_init)
+		gclk_init();
+
 	return 0;
 }
 

include/asm-avr32/arch-at32ap700x/clk.h

@@ -82,6 +82,7 @@ static inline unsigned long get_spi_clk_rate(unsigned int dev_id)
 #endif
 
 extern void clk_init(void);
+extern void gclk_init(void) __attribute__((weak));
 
 /* Board code may need the SDRAM base clock as a compile-time constant */
 #define SDRAMC_BUS_HZ	(MAIN_CLK_RATE >> CFG_CLKDIV_HSB)

include/configs/favr-32-ezkit.h

@@ -0,0 +1,201 @@
+/*
+ * Copyright (C) 2008 Atmel Corporation
+ *
+ * Configuration settings for the Favr-32 EarthLCD LCD kit.
+ *
+ * See file CREDITS for list of people who contributed to this project.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
+ * Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <asm/arch/memory-map.h>
+
+#define CONFIG_AVR32			1
+#define CONFIG_AT32AP			1
+#define CONFIG_AT32AP7000		1
+#define CONFIG_FAVR32_EZKIT		1
+
+#define CONFIG_FAVR32_EZKIT_EXT_FLASH	1
+
+/*
+ * Timer clock frequency. We're using the CPU-internal COUNT register
+ * for this, so this is equivalent to the CPU core clock frequency
+ */
+#define CFG_HZ				1000
+
+/*
+ * Set up the PLL to run at 140 MHz, the CPU to run at the PLL
+ * frequency, the HSB and PBB at 1/2, and the PBA to run at 1/4 the
+ * PLL frequency.
+ * (CFG_OSC0_HZ * CFG_PLL0_MUL) / CFG_PLL0_DIV = PLL MHz
+ */
+#define CONFIG_PLL			1
+#define CFG_POWER_MANAGER		1
+#define CFG_OSC0_HZ			20000000
+#define CFG_PLL0_DIV			1
+#define CFG_PLL0_MUL			7
+#define CFG_PLL0_SUPPRESS_CYCLES	16
+/*
+ * Set the CPU running at:
+ * PLL / (2^CFG_CLKDIV_CPU) = CPU MHz
+ */
+#define CFG_CLKDIV_CPU			0
+/*
+ * Set the HSB running at:
+ * PLL / (2^CFG_CLKDIV_HSB) = HSB MHz
+ */
+#define CFG_CLKDIV_HSB			1
+/*
+ * Set the PBA running at:
+ * PLL / (2^CFG_CLKDIV_PBA) = PBA MHz
+ */
+#define CFG_CLKDIV_PBA			2
+/*
+ * Set the PBB running at:
+ * PLL / (2^CFG_CLKDIV_PBB) = PBB MHz
+ */
+#define CFG_CLKDIV_PBB			1
+
+/*
+ * The PLLOPT register controls the PLL like this:
+ *   icp = PLLOPT<2>
+ *   ivco = PLLOPT<1:0>
+ *
+ * We want icp=1 (default) and ivco=0 (80-160 MHz) or ivco=2 (150-240MHz).
+ */
+#define CFG_PLL0_OPT			0x04
+
+#undef CONFIG_USART0
+#undef CONFIG_USART1
+#undef CONFIG_USART2
+#define CONFIG_USART3			1
+
+/* User serviceable stuff */
+#define CONFIG_DOS_PARTITION		1
+
+#define CONFIG_CMDLINE_TAG		1
+#define CONFIG_SETUP_MEMORY_TAGS	1
+#define CONFIG_INITRD_TAG		1
+
+#define CONFIG_STACKSIZE		(2048)
+
+#define CONFIG_BAUDRATE			115200
+#define CONFIG_BOOTARGS							\
+	"root=/dev/mtdblock1 rootfstype=jffs fbmem=1800k"
+
+#define CONFIG_BOOTCOMMAND						\
+	"fsload; bootm $(fileaddr)"
+
+/*
+ * Only interrupt autoboot if <space> is pressed. Otherwise, garbage
+ * data on the serial line may interrupt the boot sequence.
+ */
+#define CONFIG_BOOTDELAY		1
+#define CONFIG_AUTOBOOT			1
+#define CONFIG_AUTOBOOT_KEYED		1
+#define CONFIG_AUTOBOOT_PROMPT		\
+	"Press SPACE to abort autoboot in %d seconds\n", bootdelay
+#define CONFIG_AUTOBOOT_DELAY_STR	"d"
+#define CONFIG_AUTOBOOT_STOP_STR	" "
+
+/*
+ * After booting the board for the first time, new ethernet addresses
+ * should be generated and assigned to the environment variables
+ * "ethaddr" and "eth1addr". This is normally done during production.
+ */
+#define CONFIG_OVERWRITE_ETHADDR_ONCE	1
+#define CONFIG_NET_MULTI		1
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_MMC
+
+#undef CONFIG_CMD_AUTOSCRIPT
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_SETGETDCR
+#undef CONFIG_CMD_XIMG
+
+#define CONFIG_ATMEL_USART		1
+#define CONFIG_MACB			1
+#define CONFIG_PIO2			1
+#define CFG_NR_PIOS			5
+#define CFG_HSDRAMC			1
+#define CONFIG_MMC			1
+#define CONFIG_ATMEL_MCI		1
+
+#define CFG_DCACHE_LINESZ		32
+#define CFG_ICACHE_LINESZ		32
+
+#define CONFIG_NR_DRAM_BANKS		1
+
+/* External flash on Favr-32 */
+#if 0
+#define CFG_FLASH_CFI			1
+#define CFG_FLASH_CFI_DRIVER		1
+#endif
+
+#define CFG_FLASH_BASE			0x00000000
+#define CFG_FLASH_SIZE			0x800000
+#define CFG_MAX_FLASH_BANKS		1
+#define CFG_MAX_FLASH_SECT		135
+
+#define CFG_MONITOR_BASE		CFG_FLASH_BASE
+
+#define CFG_INTRAM_BASE			INTERNAL_SRAM_BASE
+#define CFG_INTRAM_SIZE			INTERNAL_SRAM_SIZE
+#define CFG_SDRAM_BASE			EBI_SDRAM_BASE
+
+#define CFG_ENV_IS_IN_FLASH		1
+#define CFG_ENV_SIZE			65536
+#define CFG_ENV_ADDR			(CFG_FLASH_BASE + CFG_FLASH_SIZE - CFG_ENV_SIZE)
+
+#define CFG_INIT_SP_ADDR		(CFG_INTRAM_BASE + CFG_INTRAM_SIZE)
+
+#define CFG_MALLOC_LEN			(256*1024)
+#define CFG_DMA_ALLOC_LEN		(16384)
+
+/* Allow 4MB for the kernel run-time image */
+#define CFG_LOAD_ADDR			(EBI_SDRAM_BASE + 0x00400000)
+#define CFG_BOOTPARAMS_LEN		(16 * 1024)
+
+/* Other configuration settings that shouldn't have to change all that often */
+#define CFG_PROMPT			"U-Boot> "
+#define CFG_CBSIZE			256
+#define CFG_MAXARGS			16
+#define CFG_PBSIZE			(CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
+#define CFG_LONGHELP			1
+
+#define CFG_MEMTEST_START		EBI_SDRAM_BASE
+#define CFG_MEMTEST_END			(CFG_MEMTEST_START + 0x700000)
+#define CFG_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 }
+
+#endif /* __CONFIG_H */

include/configs/hammerhead.h

@@ -0,0 +1,172 @@
+/*
+ * Copyright (C) 2008 Miromico AG
+ *
+ * Configuration settings for the Miromico Hammerhead AVR32 board
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define CONFIG_AVR32			1
+#define CONFIG_AT32AP			1
+#define CONFIG_AT32AP7000		1
+#define CONFIG_HAMMERHEAD		1
+
+#define CFG_HZ				1000
+
+/*
+ * Set up the PLL to run at 125 MHz, the CPU to run at the PLL
+ * frequency, the HSB and PBB busses to run at 1/2 the PLL frequency
+ * and the PBA bus to run at 1/4 the PLL frequency.
+ */
+#define CONFIG_PLL			1
+#define CFG_POWER_MANAGER		1
+#define CFG_OSC0_HZ			25000000
+#define CFG_PLL0_DIV			1
+#define CFG_PLL0_MUL			5
+#define CFG_PLL0_SUPPRESS_CYCLES	16
+#define CFG_CLKDIV_CPU			0
+#define CFG_CLKDIV_HSB			1
+#define CFG_CLKDIV_PBA			2
+#define CFG_CLKDIV_PBB			1
+
+/*
+ * The PLLOPT register controls the PLL like this:
+ *   icp = PLLOPT<2>
+ *   ivco = PLLOPT<1:0>
+ *
+ * We want icp=1 (default) and ivco=0 (80-160 MHz) or ivco=2 (150-240MHz).
+ */
+#define CFG_PLL0_OPT			0x04
+
+#define CONFIG_USART1			1
+
+#define CONFIG_HOSTNAME			hammerhead
+
+/* User serviceable stuff */
+#define CONFIG_DOS_PARTITION		1
+
+#define CONFIG_CMDLINE_TAG		1
+#define CONFIG_SETUP_MEMORY_TAGS	1
+#define CONFIG_INITRD_TAG		1
+
+#define CONFIG_STACKSIZE		(2048)
+
+#define CONFIG_BAUDRATE			115200
+#define CONFIG_BOOTARGS							\
+	"console=ttyS0 root=mtd1 rootfstype=jffs2"
+#define CONFIG_BOOTCOMMAND						\
+	"fsload; bootm"
+
+/*
+ * Only interrupt autoboot if <space> is pressed. Otherwise, garbage
+ * data on the serial line may interrupt the boot sequence.
+ */
+#define CONFIG_BOOTDELAY		1
+#define CONFIG_AUTOBOOT			1
+#define CONFIG_AUTOBOOT_KEYED		1
+#define CONFIG_AUTOBOOT_PROMPT				\
+	"Press SPACE to abort autoboot in %d seconds\n", bootdelay
+#define CONFIG_AUTOBOOT_DELAY_STR	"d"
+#define CONFIG_AUTOBOOT_STOP_STR	" "
+
+/*
+ * After booting the board for the first time, new ethernet address
+ * should be generated and assigned to the environment variables
+ * "ethaddr". This is normally done during production.
+ */
+#define CONFIG_OVERWRITE_ETHADDR_ONCE	1
+#define CONFIG_NET_MULTI		1
+
+/*
+ * BOOTP/DHCP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_MMC
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_SETGETDCR
+
+#define CONFIG_ATMEL_USART		1
+#define CONFIG_MACB			1
+#define CONFIG_PIO2			1
+#define CFG_NR_PIOS			5
+#define CFG_HSDRAMC			1
+#define CONFIG_MMC			1
+#define CONFIG_ATMEL_MCI		1
+
+#define CFG_DCACHE_LINESZ		32
+#define CFG_ICACHE_LINESZ		32
+
+#define CONFIG_NR_DRAM_BANKS		1
+
+#define CFG_FLASH_CFI			1
+#define CFG_FLASH_CFI_DRIVER		1
+
+#define CFG_FLASH_BASE			0x00000000
+#define CFG_FLASH_SIZE			0x800000
+#define CFG_MAX_FLASH_BANKS		1
+#define CFG_MAX_FLASH_SECT		135
+
+#define CFG_MONITOR_BASE		CFG_FLASH_BASE
+
+#define CFG_INTRAM_BASE			0x24000000
+#define CFG_INTRAM_SIZE			0x8000
+
+#define CFG_SDRAM_BASE			0x10000000
+
+#define CFG_ENV_IS_IN_FLASH		1
+#define CFG_ENV_SIZE			65536
+#define CFG_ENV_ADDR			(CFG_FLASH_BASE + CFG_FLASH_SIZE - CFG_ENV_SIZE)
+
+#define CFG_INIT_SP_ADDR		(CFG_INTRAM_BASE + CFG_INTRAM_SIZE)
+
+#define CFG_MALLOC_LEN			(256*1024)
+
+#define CFG_DMA_ALLOC_LEN		(16384)
+
+/* Allow 4MB for the kernel run-time image */
+#define CFG_LOAD_ADDR			(CFG_SDRAM_BASE + 0x00400000)
+#define CFG_BOOTPARAMS_LEN		(16 * 1024)
+
+/* Other configuration settings that shouldn't have to change all that often */
+#define CFG_PROMPT			"Hammerhead> "
+#define CFG_CBSIZE			256
+#define CFG_MAXARGS			16
+#define CFG_PBSIZE			(CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
+#define CFG_LONGHELP			1
+
+#define CFG_MEMTEST_START		CFG_SDRAM_BASE
+#define CFG_MEMTEST_END			(CFG_MEMTEST_START + 0x1f00000)
+
+#define CFG_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 }
+
+#endif /* __CONFIG_H */

include/configs/mimc200.h

@@ -0,0 +1,177 @@
+/*
+ * Copyright (C) 2006 Atmel Corporation
+ *
+ * Configuration settings for the AVR32 Network Gateway
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <asm/arch/memory-map.h>
+
+#define CONFIG_AVR32			1
+#define CONFIG_AT32AP			1
+#define CONFIG_AT32AP7000		1
+#define CONFIG_MIMC200			1
+
+#define CONFIG_MIMC200_EXT_FLASH	1
+
+#define CFG_HZ				1000
+
+/*
+ * Set up the PLL to run at 140 MHz, the CPU to run at the PLL
+ * frequency, the HSB and PBB busses to run at 1/2 the PLL frequency
+ * and the PBA bus to run at 1/4 the PLL frequency.
+ */
+#define CONFIG_PLL			1
+#define CFG_POWER_MANAGER		1
+#define CFG_OSC0_HZ			10000000
+#define CFG_PLL0_DIV			1
+#define CFG_PLL0_MUL			15
+#define CFG_PLL0_SUPPRESS_CYCLES	16
+#define CFG_CLKDIV_CPU			0
+#define CFG_CLKDIV_HSB			1
+#define CFG_CLKDIV_PBA			2
+#define CFG_CLKDIV_PBB			1
+
+/*
+ * The PLLOPT register controls the PLL like this:
+ *   icp = PLLOPT<2>
+ *   ivco = PLLOPT<1:0>
+ *
+ * We want icp=1 (default) and ivco=0 (80-160 MHz) or ivco=2 (150-240MHz).
+ */
+#define CFG_PLL0_OPT			0x04
+
+#define CONFIG_USART1			1
+#define CONFIG_MIMC200_DBGLINK		1
+
+/* User serviceable stuff */
+#define CONFIG_DOS_PARTITION		1
+
+#define CONFIG_CMDLINE_TAG		1
+#define CONFIG_SETUP_MEMORY_TAGS	1
+#define CONFIG_INITRD_TAG		1
+
+#define CONFIG_STACKSIZE		(2048)
+
+#define CONFIG_BAUDRATE			115200
+#define CONFIG_BOOTARGS							\
+	"console=ttyS0 root=/dev/mtdblock1 fbmem=600k rootfstype=jffs2"
+#define CONFIG_BOOTCOMMAND						\
+	"fsload; bootm"
+
+#define CONFIG_SILENT_CONSOLE		1	/* enable silent startup */
+#define CONFIG_SILENT_CONSOLE_INPUT	1	/* disable console inputs */
+#define CFG_DEVICE_NULLDEV		1	/* include nulldev device */
+
+/*
+ * Only interrupt autoboot if <space> is pressed. Otherwise, garbage
+ * data on the serial line may interrupt the boot sequence.
+ */
+#define CONFIG_BOOTDELAY		0
+#define CONFIG_ZERO_BOOTDELAY_CHECK 	1
+#define CONFIG_AUTOBOOT			1
+
+/*
+ * After booting the board for the first time, new ethernet addresses
+ * should be generated and assigned to the environment variables
+ * "ethaddr" and "eth1addr". This is normally done during production.
+ */
+#define CONFIG_OVERWRITE_ETHADDR_ONCE	1
+#define CONFIG_NET_MULTI		1
+
+/*
+ * BOOTP/DHCP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+
+#define CONFIG_DOS_PARTITION		1
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_MMC
+#define CONFIG_CMD_NET
+
+#define CONFIG_ATMEL_USART		1
+#define CONFIG_MACB			1
+#define CONFIG_PIO2			1
+#define CFG_NR_PIOS			5
+#define CFG_HSDRAMC			1
+#define CONFIG_MMC			1
+#define CONFIG_ATMEL_MCI		1
+
+#define CFG_DCACHE_LINESZ		32
+#define CFG_ICACHE_LINESZ		32
+
+#define CONFIG_NR_DRAM_BANKS		1
+
+#define CFG_FLASH_CFI			1
+#define CFG_FLASH_CFI_DRIVER		1
+
+#define CFG_FLASH_BASE			0x00000000
+#define CFG_FLASH_SIZE			0x800000
+#define CFG_MAX_FLASH_BANKS		1
+#define CFG_MAX_FLASH_SECT		135
+
+#define CFG_MONITOR_BASE		CFG_FLASH_BASE
+
+#define CFG_INTRAM_BASE			INTERNAL_SRAM_BASE
+#define CFG_INTRAM_SIZE			INTERNAL_SRAM_SIZE
+#define CFG_SDRAM_BASE			EBI_SDRAM_BASE
+
+#define CFG_FRAM_BASE			0x08000000
+#define CFG_FRAM_SIZE			0x20000
+
+#define CFG_ENV_IS_IN_FLASH		1
+#define CFG_ENV_SIZE			65536
+#define CFG_ENV_ADDR			(CFG_FLASH_BASE + CFG_FLASH_SIZE - CFG_ENV_SIZE)
+
+#define CFG_INIT_SP_ADDR		(CFG_INTRAM_BASE + CFG_INTRAM_SIZE)
+
+#define CFG_MALLOC_LEN			(1024*1024)
+#define CFG_DMA_ALLOC_LEN		(16384)
+
+/* Allow 4MB for the kernel run-time image */
+#define CFG_LOAD_ADDR			(EBI_SDRAM_BASE + 0x00400000)
+#define CFG_BOOTPARAMS_LEN		(16 * 1024)
+
+/* Other configuration settings that shouldn't have to change all that often */
+#define CFG_PROMPT			"U-Boot> "
+#define CFG_CBSIZE			256
+#define CFG_MAXARGS			16
+#define CFG_PBSIZE			(CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
+#define CFG_LONGHELP			1
+
+#define CFG_MEMTEST_START		EBI_SDRAM_BASE
+#define CFG_MEMTEST_END			(CFG_MEMTEST_START + 0x1f00000)
+
+#define CFG_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 }
+
+#endif /* __CONFIG_H */

net/eth.c

@@ -69,9 +69,7 @@ extern int uli526x_initialize(bd_t *);
 extern int npe_initialize(bd_t *);
 extern int uec_initialize(int);
 extern int bfin_EMAC_initialize(bd_t *);
-extern int atstk1000_eth_initialize(bd_t *);
 extern int greth_initialize(bd_t *);
-extern int atngw100_eth_initialize(bd_t *);
 extern int mcffec_initialize(bd_t*);
 extern int mcdmafec_initialize(bd_t*);
 extern int at91sam9_eth_initialize(bd_t *);
@@ -271,15 +269,9 @@ int eth_initialize(bd_t *bis)
 #if defined(CONFIG_BF537)
 	bfin_EMAC_initialize(bis);
 #endif
-#if defined(CONFIG_ATSTK1000)
-	atstk1000_eth_initialize(bis);
-#endif
 #if defined(CONFIG_GRETH)
 	greth_initialize(bis);
 #endif
-#if defined(CONFIG_ATNGW100)
-	atngw100_eth_initialize(bis);
-#endif
 #if defined(CONFIG_MCFFEC)
 	mcffec_initialize(bis);
 #endif