Merge branch 'master' of git://git.denx.de/u-boot-arm

MAINTAINERS

@@ -565,6 +565,10 @@ Albert ARIBAUD <albert.u.boot@aribaud.net>
 
 	edminiv2	ARM926EJS (Orion5x SoC)
 
+Raphael Assenat <raph@8d.com>
+
+	eco5pk		ARM ARMV7 (AM35x SoC)
+
 Stefano Babic <sbabic@denx.de>
 
 	ea20		davinci
@@ -896,6 +900,10 @@ Michal Simek <monstr@monstr.eu>
 
 	zynq		ARM ARMV7 (Zynq SoC)
 
+Lucas Stach <dev@lynxeye.de>
+
+	colibri_t20_iris	Tegra20 (ARM7 & A9 Dual Core)
+
 Nick Thompson <nick.thompson@gefanuc.com>
 
 	da830evm	ARM926EJS (DA830/OMAP-L137)
@@ -1005,6 +1013,10 @@ Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
 
 	armadillo-800eva	R8A7740 (RMOBILE SoC)
 
+Pali Rohár <pali.rohar@gmail.com>
+
+	nokia_rx51	ARM ARMV7 (OMAP34xx SoC)
+
 -------------------------------------------------------------------------
 
 Unknown / orphaned boards:

Makefile

@@ -516,17 +516,18 @@ $(obj)u-boot.spr:	$(obj)u-boot.img $(obj)spl/u-boot-spl.bin
 
 ifeq ($(SOC),tegra20)
 ifeq ($(CONFIG_OF_SEPARATE),y)
-$(obj)u-boot-dtb-tegra.bin:	$(obj)spl/u-boot-spl.bin $(obj)u-boot.bin $(obj)u-boot.dtb
-		$(OBJCOPY) ${OBJCFLAGS} --pad-to=$(CONFIG_SYS_TEXT_BASE) -O binary $(obj)spl/u-boot-spl $(obj)spl/u-boot-spl-pad.bin
-		cat $(obj)spl/u-boot-spl-pad.bin $(obj)u-boot.bin $(obj)u-boot.dtb > $@
-		rm $(obj)spl/u-boot-spl-pad.bin
+nodtb=dtb
+dtbfile=$(obj)u-boot.dtb
 else
-$(obj)u-boot-nodtb-tegra.bin:	$(obj)spl/u-boot-spl.bin $(obj)u-boot.bin
+nodtb=nodtb
+dtbfile=
+endif
+
+$(obj)u-boot-$(nodtb)-tegra.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin $(dtbfile)
 		$(OBJCOPY) ${OBJCFLAGS} --pad-to=$(CONFIG_SYS_TEXT_BASE) -O binary $(obj)spl/u-boot-spl $(obj)spl/u-boot-spl-pad.bin
-		cat $(obj)spl/u-boot-spl-pad.bin $(obj)u-boot.bin > $@
+		cat $(obj)spl/u-boot-spl-pad.bin $(obj)u-boot.bin $(dtbfile) > $@
 		rm $(obj)spl/u-boot-spl-pad.bin
 endif
-endif
 
 ifeq ($(CONFIG_SANDBOX),y)
 GEN_UBOOT = \

README

@@ -661,6 +661,10 @@ The following options need to be configured:
 						additional board info beside
 						the logo
 
+		When CONFIG_CFB_CONSOLE_ANSI is defined, console will support
+		a limited number of ANSI escape sequences (cursor control,
+		erase functions and limited graphics rendition control).
+
 		When CONFIG_CFB_CONSOLE is defined, video console is
 		default i/o. Serial console can be forced with
 		environment 'console=serial'.

arch/arm/cpu/arm1136/mx35/generic.c

@@ -361,8 +361,12 @@ unsigned int mxc_get_clock(enum mxc_clock clk)
 		return get_ipg_per_clk();
 	case MXC_UART_CLK:
 		return imx_get_uartclk();
-	case MXC_ESDHC_CLK:
+	case MXC_ESDHC1_CLK:
 		return mxc_get_peri_clock(ESDHC1_CLK);
+	case MXC_ESDHC2_CLK:
+		return mxc_get_peri_clock(ESDHC2_CLK);
+	case MXC_ESDHC3_CLK:
+		return mxc_get_peri_clock(ESDHC3_CLK);
 	case MXC_USB_CLK:
 		return mxc_get_main_clock(USB_CLK);
 	case MXC_FEC_CLK:
@@ -472,7 +476,13 @@ int cpu_mmc_init(bd_t *bis)
 int get_clocks(void)
 {
 #ifdef CONFIG_FSL_ESDHC
-	gd->sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
+#if CONFIG_SYS_FSL_ESDHC_ADDR == MMC_SDHC2_BASE_ADDR
+	gd->sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
+#elif CONFIG_SYS_FSL_ESDHC_ADDR == MMC_SDHC3_BASE_ADDR
+	gd->sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
+#else
+	gd->sdhc_clk = mxc_get_clock(MXC_ESDHC1_CLK);
+#endif
 #endif
 	return 0;
 }

arch/arm/cpu/arm720t/interrupts.c

@@ -26,6 +26,8 @@
  * MA 02111-1307 USA
  */
 
+#include <common.h>
+
 #ifdef CONFIG_USE_IRQ
 void do_irq (struct pt_regs *pt_regs)
 {

arch/arm/cpu/arm720t/tegra-common/spl.c

@@ -23,105 +23,42 @@
  * MA 02111-1307 USA
  */
 #include <common.h>
-#include <asm/u-boot.h>
-#include <asm/utils.h>
-#include <nand.h>
-#include <mmc.h>
-#include <fat.h>
-#include <version.h>
-#include <i2c.h>
-#include <image.h>
-#include <malloc.h>
-#include <linux/compiler.h>
 #include "cpu.h"
+#include <spl.h>
 
 #include <asm/io.h>
 #include <asm/arch/clock.h>
 #include <asm/arch/pinmux.h>
 #include <asm/arch/tegra.h>
 #include <asm/arch-tegra/board.h>
-#include <asm/arch-tegra/clk_rst.h>
-#include <asm/arch-tegra/pmc.h>
-#include <asm/arch-tegra/scu.h>
-#include <asm/arch-tegra/sys_proto.h>
+#include <asm/arch/spl.h>
 
-DECLARE_GLOBAL_DATA_PTR;
 
-/* Define global data structure pointer to it*/
-static gd_t gdata __attribute__ ((section(".data")));
-static bd_t bdata __attribute__ ((section(".data")));
-
-inline void hang(void)
+void spl_board_init(void)
 {
-	puts("### ERROR ### Please RESET the board ###\n");
-	for (;;)
-		;
-}
+	struct pmux_tri_ctlr *pmt = (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+
+	/* enable JTAG */
+	writel(0xC0, &pmt->pmt_cfg_ctl);
 
-void board_init_f(ulong dummy)
-{
 	board_init_uart_f();
 
 	/* Initialize periph GPIOs */
 	gpio_early_init_uart();
 
-	/*
-	 * We call relocate_code() with relocation target same as the
-	 * CONFIG_SYS_SPL_TEXT_BASE. This will result in relocation getting
-	 * skipped. Instead, only .bss initialization will happen. That's
-	 * all we need
-	 */
-	debug(">>board_init_f()\n");
-	relocate_code(CONFIG_SPL_STACK, &gdata, CONFIG_SPL_TEXT_BASE);
+	clock_early_init();
+	preloader_console_init();
 }
 
-/* This requires UART clocks to be enabled */
-static void preloader_console_init(void)
+u32 spl_boot_device(void)
 {
-	const char *u_boot_rev = U_BOOT_VERSION;
-
-	gd = &gdata;
-	gd->bd = &bdata;
-	gd->flags |= GD_FLG_RELOC;
-	gd->baudrate = CONFIG_BAUDRATE;
-
-	serial_init();		/* serial communications setup */
-
-	gd->have_console = 1;
-
-	/* Avoid a second "U-Boot" coming from this string */
-	u_boot_rev = &u_boot_rev[7];
-
-	printf("\nU-Boot SPL %s (%s - %s)\n", u_boot_rev, U_BOOT_DATE,
-		U_BOOT_TIME);
+	return BOOT_DEVICE_RAM;
 }
 
-void board_init_r(gd_t *id, ulong dummy)
+void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image)
 {
-	struct pmux_tri_ctlr *pmt = (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
-
-	/* enable JTAG */
-	writel(0xC0, &pmt->pmt_cfg_ctl);
-
-	debug(">>spl:board_init_r()\n");
-
-	mem_malloc_init(CONFIG_SYS_SPL_MALLOC_START,
-			CONFIG_SYS_SPL_MALLOC_SIZE);
-
-#ifdef CONFIG_SPL_BOARD_INIT
-	spl_board_init();
-#endif
+	debug("image entry point: 0x%X\n", spl_image->entry_point);
 
-	clock_early_init();
-	serial_init();
-	preloader_console_init();
-
-	start_cpu((u32)CONFIG_SYS_TEXT_BASE);
+	start_cpu((u32)spl_image->entry_point);
 	halt_avp();
-	/* not reached */
-}
-
-int board_usb_init(const void *blob)
-{
-	return 0;
 }

arch/arm/cpu/armv7/am33xx/clock.c

@@ -115,6 +115,41 @@ static void enable_per_clocks(void)
 	while (readl(&cmwkup->wkup_uart0ctrl) != PRCM_MOD_EN)
 		;
 
+	/* UART1 */
+#ifdef CONFIG_SERIAL2
+	writel(PRCM_MOD_EN, &cmper->uart1clkctrl);
+	while (readl(&cmper->uart1clkctrl) != PRCM_MOD_EN)
+		;
+#endif /* CONFIG_SERIAL2 */
+
+	/* UART2 */
+#ifdef CONFIG_SERIAL3
+	writel(PRCM_MOD_EN, &cmper->uart2clkctrl);
+	while (readl(&cmper->uart2clkctrl) != PRCM_MOD_EN)
+		;
+#endif /* CONFIG_SERIAL3 */
+
+	/* UART3 */
+#ifdef CONFIG_SERIAL4
+	writel(PRCM_MOD_EN, &cmper->uart3clkctrl);
+	while (readl(&cmper->uart3clkctrl) != PRCM_MOD_EN)
+		;
+#endif /* CONFIG_SERIAL4 */
+
+	/* UART4 */
+#ifdef CONFIG_SERIAL5
+	writel(PRCM_MOD_EN, &cmper->uart4clkctrl);
+	while (readl(&cmper->uart4clkctrl) != PRCM_MOD_EN)
+		;
+#endif /* CONFIG_SERIAL5 */
+
+	/* UART5 */
+#ifdef CONFIG_SERIAL6
+	writel(PRCM_MOD_EN, &cmper->uart5clkctrl);
+	while (readl(&cmper->uart5clkctrl) != PRCM_MOD_EN)
+		;
+#endif /* CONFIG_SERIAL6 */
+
 	/* MMC0*/
 	writel(PRCM_MOD_EN, &cmper->mmc0clkctrl);
 	while (readl(&cmper->mmc0clkctrl) != PRCM_MOD_EN)

arch/arm/cpu/armv7/mx5/clock.c

@@ -338,7 +338,7 @@ static u32 get_ipg_per_clk(void)
 /* Get the output clock rate of a standard PLL MUX for peripherals. */
 static u32 get_standard_pll_sel_clk(u32 clk_sel)
 {
-	u32 freq;
+	u32 freq = 0;
 
 	switch (clk_sel & 0x3) {
 	case 0:

arch/arm/cpu/armv7/mx5/lowlevel_init.S

@@ -26,6 +26,13 @@
 
 .section ".text.init", "x"
 
+.macro init_arm_erratum
+	/* ARM erratum ID #468414 */
+	mrc 15, 0, r1, c1, c0, 1
+	orr r1, r1, #(1 << 5)    /* enable L1NEON bit */
+	mcr 15, 0, r1, c1, c0, 1
+.endm
+
 /*
  * L2CC Cache setup/invalidation/disable
  */
@@ -162,9 +169,9 @@ setup_pll_func:
 .endm
 
 .macro init_clock
+#if defined (CONFIG_MX51)
 	ldr r0, =CCM_BASE_ADDR
 
-#if defined(CONFIG_MX51)
 	/* Gate of clocks to the peripherals first */
 	ldr r1, =0x3FFFFFFF
 	str r1, [r0, #CLKCTL_CCGR0]
@@ -190,21 +197,6 @@ setup_pll_func:
 1:	ldr r1, [r0, #CLKCTL_CDHIPR]
 	cmp r1, #0x0
 	bne 1b
-#else
-	ldr r1, =0x3FFFFFFF
-	str r1, [r0, #CLKCTL_CCGR0]
-	str r4, [r0, #CLKCTL_CCGR1]
-	str r4, [r0, #CLKCTL_CCGR2]
-	str r4, [r0, #CLKCTL_CCGR3]
-	str r4, [r0, #CLKCTL_CCGR7]
-
-	ldr r1, =0x00030000
-	str r1, [r0, #CLKCTL_CCGR4]
-	ldr r1, =0x00FFF030
-	str r1, [r0, #CLKCTL_CCGR5]
-	ldr r1, =0x0F00030F
-	str r1, [r0, #CLKCTL_CCGR6]
-#endif
 
 	/* Switch ARM to step clock */
 	mov r1, #0x4
@@ -217,7 +209,6 @@ setup_pll_func:
 	setup_pll PLL1_BASE_ADDR, 800
 #endif
 
-#if defined(CONFIG_MX51)
 	setup_pll PLL3_BASE_ADDR, 665
 
 	/* Switch peripheral to PLL 3 */
@@ -234,7 +225,7 @@ setup_pll_func:
 	str r1, [r0, #CLKCTL_CBCDR]
 	ldr r1, =0x000020C0 | CONFIG_SYS_DDR_CLKSEL
 	str r1, [r0, #CLKCTL_CBCMR]
-#endif
+
 	setup_pll PLL3_BASE_ADDR, 216
 
 	/* Set the platform clock dividers */
@@ -244,21 +235,17 @@ setup_pll_func:
 
 	ldr r0, =CCM_BASE_ADDR
 
-#if defined(CONFIG_MX51)
 	/* Run 3.0 at Full speed, for other TO's wait till we increase VDDGP */
 	ldr r3, [r4, #ROM_SI_REV]
 	cmp r3, #0x10
 	movls r1, #0x1
 	movhi r1, #0
-#else
-	mov r1, #0
-#endif
+
 	str r1, [r0, #CLKCTL_CACRR]
 
 	/* Switch ARM back to PLL 1 */
 	str r4, [r0, #CLKCTL_CCSR]
 
-#if defined(CONFIG_MX51)
 	/* setup the rest */
 	/* Use lp_apm (24MHz) source for perclk */
 	ldr r1, =0x000020C2 | CONFIG_SYS_DDR_CLKSEL
@@ -266,7 +253,6 @@ setup_pll_func:
 	/* ddr clock from PLL 1, all perclk dividers are 1 since using 24MHz */
 	ldr r1, =CONFIG_SYS_CLKTL_CBCDR
 	str r1, [r0, #CLKCTL_CBCDR]
-#endif
 
 	/* Restore the default values in the Gate registers */
 	ldr r1, =0xFFFFFFFF
@@ -277,47 +263,127 @@ setup_pll_func:
 	str r1, [r0, #CLKCTL_CCGR4]
 	str r1, [r0, #CLKCTL_CCGR5]
 	str r1, [r0, #CLKCTL_CCGR6]
-#if defined(CONFIG_MX53)
-	str r1, [r0, #CLKCTL_CCGR7]
-#endif
 
-#if defined(CONFIG_MX51)
 	/* Use PLL 2 for UART's, get 66.5MHz from it */
 	ldr r1, =0xA5A2A020
 	str r1, [r0, #CLKCTL_CSCMR1]
 	ldr r1, =0x00C30321
 	str r1, [r0, #CLKCTL_CSCDR1]
-#elif defined(CONFIG_MX53)
+	/* make sure divider effective */
+1:	ldr r1, [r0, #CLKCTL_CDHIPR]
+	cmp r1, #0x0
+	bne 1b
+
+	str r4, [r0, #CLKCTL_CCDR]
+
+	/* for cko - for ARM div by 8 */
+	mov r1, #0x000A0000
+	add r1, r1, #0x00000F0
+	str r1, [r0, #CLKCTL_CCOSR]
+#else	/* CONFIG_MX53 */
+	ldr r0, =CCM_BASE_ADDR
+
+	/* Gate of clocks to the peripherals first */
+	ldr r1, =0x3FFFFFFF
+	str r1, [r0, #CLKCTL_CCGR0]
+	str r4, [r0, #CLKCTL_CCGR1]
+	str r4, [r0, #CLKCTL_CCGR2]
+	str r4, [r0, #CLKCTL_CCGR3]
+	str r4, [r0, #CLKCTL_CCGR7]
+	ldr r1, =0x00030000
+	str r1, [r0, #CLKCTL_CCGR4]
+	ldr r1, =0x00FFF030
+	str r1, [r0, #CLKCTL_CCGR5]
+	ldr r1, =0x0F00030F
+	str r1, [r0, #CLKCTL_CCGR6]
+
+	/* Switch ARM to step clock */
+	mov r1, #0x4
+	str r1, [r0, #CLKCTL_CCSR]
+
+	setup_pll PLL1_BASE_ADDR, 800
+
+        setup_pll PLL3_BASE_ADDR, 400
+
+        /* Switch peripheral to PLL3 */
+        ldr r0, =CCM_BASE_ADDR
+        ldr r1, =0x00015154
+        str r1, [r0, #CLKCTL_CBCMR]
+        ldr r1, =0x02888945
+        orr r1, r1, #(1 << 16)
+        str r1, [r0, #CLKCTL_CBCDR]
+        /* make sure change is effective */
+1:      ldr r1, [r0, #CLKCTL_CDHIPR]
+        cmp r1, #0x0
+        bne 1b
+
+        setup_pll PLL2_BASE_ADDR, 400
+
 	/* Switch peripheral to PLL2 */
 	ldr r0, =CCM_BASE_ADDR
 	ldr r1, =0x00808145
-	orr r1, r1, #2 << 10
-	orr r1, r1, #1 << 19
+	orr r1, r1, #(2 << 10)
+	orr r1, r1, #(0 << 16)
+	orr r1, r1, #(1 << 19)
 	str r1, [r0, #CLKCTL_CBCDR]
 
 	ldr r1, =0x00016154
 	str r1, [r0, #CLKCTL_CBCMR]
-	/* Change uart clk parent to pll2*/
+
+	/*change uart clk parent to pll2*/
 	ldr r1, [r0, #CLKCTL_CSCMR1]
 	and r1, r1, #0xfcffffff
 	orr r1, r1, #0x01000000
 	str r1, [r0, #CLKCTL_CSCMR1]
+
+	/* make sure change is effective */
+1:      ldr r1, [r0, #CLKCTL_CDHIPR]
+	cmp r1, #0x0
+	bne 1b
+
+        setup_pll PLL3_BASE_ADDR, 216
+
+	setup_pll PLL4_BASE_ADDR, 455
+
+	/* Set the platform clock dividers */
+	ldr r0, =ARM_BASE_ADDR
+	ldr r1, =0x00000124
+	str r1, [r0, #0x14]
+
+	ldr r0, =CCM_BASE_ADDR
+	mov r1, #0
+	str r1, [r0, #CLKCTL_CACRR]
+
+	/* Switch ARM back to PLL 1. */
+	mov r1, #0x0
+	str r1, [r0, #CLKCTL_CCSR]
+
+	/* make uart div=6 */
 	ldr r1, [r0, #CLKCTL_CSCDR1]
 	and r1, r1, #0xffffffc0
 	orr r1, r1, #0x0a
 	str r1, [r0, #CLKCTL_CSCDR1]
-#endif
-	/* make sure divider effective */
-1:	ldr r1, [r0, #CLKCTL_CDHIPR]
-	cmp r1, #0x0
-	bne 1b
 
-	str r4, [r0, #CLKCTL_CCDR]
+	/* Restore the default values in the Gate registers */
+	ldr r1, =0xFFFFFFFF
+	str r1, [r0, #CLKCTL_CCGR0]
+	str r1, [r0, #CLKCTL_CCGR1]
+	str r1, [r0, #CLKCTL_CCGR2]
+	str r1, [r0, #CLKCTL_CCGR3]
+	str r1, [r0, #CLKCTL_CCGR4]
+	str r1, [r0, #CLKCTL_CCGR5]
+	str r1, [r0, #CLKCTL_CCGR6]
+	str r1, [r0, #CLKCTL_CCGR7]
 
-	/* for cko - for ARM div by 8 */
-	mov r1, #0x000A0000
-	add r1, r1, #0x00000F0
-	str r1, [r0, #CLKCTL_CCOSR]
+        mov r1, #0x00000
+        str r1, [r0, #CLKCTL_CCDR]
+
+        /* for cko - for ARM div by 8 */
+        mov r1, #0x000A0000
+        add r1, r1, #0x00000F0
+        str r1, [r0, #CLKCTL_CCOSR]
+
+#endif	/* CONFIG_MX53 */
 .endm
 
 .macro setup_wdog
@@ -340,6 +406,8 @@ ENTRY(lowlevel_init)
 	str r1, [r0, #0x4]
 #endif
 
+	init_arm_erratum
+
 	init_l2cc
 
 	init_aips
@@ -370,3 +438,9 @@ W_DP_665:		.word DP_OP_665
 W_DP_216:		.word DP_OP_216
 			.word DP_MFD_216
 			.word DP_MFN_216
+W_DP_400:               .word DP_OP_400
+			.word DP_MFD_400
+			.word DP_MFN_400
+W_DP_455:               .word DP_OP_455
+			.word DP_MFD_455
+			.word DP_MFN_455

arch/arm/cpu/armv7/omap3/board.c

@@ -50,7 +50,9 @@ DECLARE_GLOBAL_DATA_PTR;
 /* Declarations */
 extern omap3_sysinfo sysinfo;
 static void omap3_setup_aux_cr(void);
+#ifndef CONFIG_SYS_L2CACHE_OFF
 static void omap3_invalidate_l2_cache_secure(void);
+#endif
 
 static const struct gpio_bank gpio_bank_34xx[6] = {
 	{ (void *)OMAP34XX_GPIO1_BASE, METHOD_GPIO_24XX },
@@ -410,19 +412,6 @@ static void omap3_update_aux_cr_secure(u32 set_bits, u32 clear_bits)
 	}
 }
 
-static void omap3_update_aux_cr(u32 set_bits, u32 clear_bits)
-{
-	u32 acr;
-
-	/* Read ACR */
-	asm volatile ("mrc p15, 0, %0, c1, c0, 1" : "=r" (acr));
-	acr &= ~clear_bits;
-	acr |= set_bits;
-
-	/* Write ACR - affects non-secure banked bits */
-	asm volatile ("mcr p15, 0, %0, c1, c0, 1" : : "r" (acr));
-}
-
 static void omap3_setup_aux_cr(void)
 {
 	/* Workaround for Cortex-A8 errata: #454179 #430973
@@ -436,6 +425,19 @@ static void omap3_setup_aux_cr(void)
 }
 
 #ifndef CONFIG_SYS_L2CACHE_OFF
+static void omap3_update_aux_cr(u32 set_bits, u32 clear_bits)
+{
+	u32 acr;
+
+	/* Read ACR */
+	asm volatile ("mrc p15, 0, %0, c1, c0, 1" : "=r" (acr));
+	acr &= ~clear_bits;
+	acr |= set_bits;
+
+	/* Write ACR - affects non-secure banked bits */
+	asm volatile ("mcr p15, 0, %0, c1, c0, 1" : : "r" (acr));
+}
+
 /* Invalidate the entire L2 cache from secure mode */
 static void omap3_invalidate_l2_cache_secure(void)
 {

arch/arm/cpu/armv7/socfpga/spl.c

@@ -21,7 +21,6 @@
 #include <asm/utils.h>
 #include <version.h>
 #include <image.h>
-#include <malloc.h>
 #include <asm/arch/reset_manager.h>
 #include <spl.h>
 
@@ -37,9 +36,6 @@ u32 spl_boot_device(void)
  */
 void spl_board_init(void)
 {
-	/* init timer for enabling delay function */
-	timer_init();
-
 	/* de-assert reset for peripherals and bridges based on handoff */
 	reset_deassert_peripherals_handoff();
 

arch/arm/cpu/tegra20-common/emc.c

@@ -257,7 +257,7 @@ static int decode_emc(const void *blob, unsigned rate, struct emc_ctlr **emcp,
 int tegra_set_emc(const void *blob, unsigned rate)
 {
 	struct emc_ctlr *emc;
-	const u32 *table;
+	const u32 *table = NULL;
 	int err, i;
 
 	err = decode_emc(blob, rate, &emc, &table);

arch/arm/cpu/u-boot.lds

@@ -94,3 +94,7 @@ SECTIONS
 	/DISCARD/ : { *(.interp*) }
 	/DISCARD/ : { *(.gnu*) }
 }
+
+#if defined(CONFIG_SPL_TEXT_BASE) && defined(CONFIG_SPL_MAX_SIZE)
+ASSERT(__bss_end__ < (CONFIG_SPL_TEXT_BASE + CONFIG_SPL_MAX_SIZE), "SPL image too big");
+#endif

arch/arm/imx-common/iomux-v3.c

@@ -54,9 +54,10 @@ int imx_iomux_v3_setup_pad(iomux_v3_cfg_t pad)
 	return 0;
 }
 
-int imx_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t *pad_list, unsigned count)
+int imx_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t const *pad_list,
+				     unsigned count)
 {
-	iomux_v3_cfg_t *p = pad_list;
+	iomux_v3_cfg_t const *p = pad_list;
 	int i;
 	int ret;
 

arch/arm/include/asm/arch-mx25/imx-regs.h

@@ -2,7 +2,7 @@
  * Copyright (C) 2009, DENX Software Engineering
  * Author: John Rigby <jcrigby@gmail.com
  *
- *   Based on arch-mx31/mx31-regs.h
+ *   Based on arch-mx31/imx-regs.h
  *	Copyright (C) 2009 Ilya Yanok,
  *		Emcraft Systems <yanok@emcraft.com>
  *   and arch-mx27/imx-regs.h
@@ -33,8 +33,7 @@
 #ifndef _IMX_REGS_H
 #define _IMX_REGS_H
 
-#ifndef __ASSEMBLY__
-
+#if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__))
 #include <asm/types.h>
 
 #ifdef CONFIG_FEC_MXC
@@ -254,6 +253,7 @@ struct aips_regs {
 
 /* 128K Internal Static RAM */
 #define IMX_RAM_BASE		(0x78000000)
+#define IMX_RAM_SIZE		(128 * 1024)
 
 /* SDRAM BANKS */
 #define IMX_SDRAM_BANK0_BASE	(0x80000000)

arch/arm/include/asm/arch-mx35/clock.h

@@ -44,7 +44,9 @@ enum mxc_clock {
 	MXC_IPG_CLK,
 	MXC_IPG_PERCLK,
 	MXC_UART_CLK,
-	MXC_ESDHC_CLK,
+	MXC_ESDHC1_CLK,
+	MXC_ESDHC2_CLK,
+	MXC_ESDHC3_CLK,
 	MXC_USB_CLK,
 	MXC_CSPI_CLK,
 	MXC_FEC_CLK,

arch/arm/include/asm/arch-mx35/lowlevel_macro.S

@@ -19,122 +19,121 @@
  * MA 02111-1307 USA
  */
 
+#include <asm/arch/imx-regs.h>
+#include <generated/asm-offsets.h>
+#include <asm/macro.h>
+
 /*
  * AIPS setup - Only setup MPROTx registers.
  * The PACR default values are good.
+ *
+ * Default argument values:
+ *  - MPR: Set all MPROTx to be non-bufferable, trusted for R/W, not forced to
+ *    user-mode.
+ *  - OPACR: Clear the on and off peripheral modules Supervisor Protect bit for
+ *    SDMA to access them.
  */
-.macro init_aips
-	/*
-	 * Set all MPROTx to be non-bufferable, trusted for R/W,
-	 * not forced to user-mode.
-	 */
-	ldr r0, =AIPS1_BASE_ADDR
-	ldr r1, =AIPS_MPR_CONFIG
-	str r1, [r0, #0x00]
-	str r1, [r0, #0x04]
-	ldr r0, =AIPS2_BASE_ADDR
-	str r1, [r0, #0x00]
-	str r1, [r0, #0x04]
+.macro init_aips mpr=0x77777777, opacr=0x00000000
+	ldr	r0, =AIPS1_BASE_ADDR
+	ldr	r1, =\mpr
+	str	r1, [r0, #AIPS_MPR_0_7]
+	str	r1, [r0, #AIPS_MPR_8_15]
+	ldr	r2, =AIPS2_BASE_ADDR
+	str	r1, [r2, #AIPS_MPR_0_7]
+	str	r1, [r2, #AIPS_MPR_8_15]
 
-	/*
-	 * Clear the on and off peripheral modules Supervisor Protect bit
-	 * for SDMA to access them. Did not change the AIPS control registers
-	 * (offset 0x20) access type
-	 */
-	ldr r0, =AIPS1_BASE_ADDR
-	ldr r1, =AIPS_OPACR_CONFIG
-	str r1, [r0, #0x40]
-	str r1, [r0, #0x44]
-	str r1, [r0, #0x48]
-	str r1, [r0, #0x4C]
-	str r1, [r0, #0x50]
-	ldr r0, =AIPS2_BASE_ADDR
-	str r1, [r0, #0x40]
-	str r1, [r0, #0x44]
-	str r1, [r0, #0x48]
-	str r1, [r0, #0x4C]
-	str r1, [r0, #0x50]
+	/* Did not change the AIPS control registers access type. */
+	ldr	r1, =\opacr
+	str	r1, [r0, #AIPS_OPACR_0_7]
+	str	r1, [r0, #AIPS_OPACR_8_15]
+	str	r1, [r0, #AIPS_OPACR_16_23]
+	str	r1, [r0, #AIPS_OPACR_24_31]
+	str	r1, [r0, #AIPS_OPACR_32_39]
+	str	r1, [r2, #AIPS_OPACR_0_7]
+	str	r1, [r2, #AIPS_OPACR_8_15]
+	str	r1, [r2, #AIPS_OPACR_16_23]
+	str	r1, [r2, #AIPS_OPACR_24_31]
+	str	r1, [r2, #AIPS_OPACR_32_39]
 .endm
 
-/* MAX (Multi-Layer AHB Crossbar Switch) setup */
-.macro init_max
-	ldr r0, =MAX_BASE_ADDR
-	/* MPR - priority is M4 > M2 > M3 > M5 > M0 > M1 */
-	ldr r1, =MAX_MPR_CONFIG
-	str r1, [r0, #0x000]        /* for S0 */
-	str r1, [r0, #0x100]        /* for S1 */
-	str r1, [r0, #0x200]        /* for S2 */
-	str r1, [r0, #0x300]        /* for S3 */
-	str r1, [r0, #0x400]        /* for S4 */
-	/* SGPCR - always park on last master */
-	ldr r1, =MAX_SGPCR_CONFIG
-	str r1, [r0, #0x010]        /* for S0 */
-	str r1, [r0, #0x110]        /* for S1 */
-	str r1, [r0, #0x210]        /* for S2 */
-	str r1, [r0, #0x310]        /* for S3 */
-	str r1, [r0, #0x410]        /* for S4 */
-	/* MGPCR - restore default values */
-	ldr r1, =MAX_MGPCR_CONFIG
-	str r1, [r0, #0x800]        /* for M0 */
-	str r1, [r0, #0x900]        /* for M1 */
-	str r1, [r0, #0xA00]        /* for M2 */
-	str r1, [r0, #0xB00]        /* for M3 */
-	str r1, [r0, #0xC00]        /* for M4 */
-	str r1, [r0, #0xD00]        /* for M5 */
+/*
+ * MAX (Multi-Layer AHB Crossbar Switch) setup
+ *
+ * Default argument values:
+ *  - MPR: priority is M4 > M2 > M3 > M5 > M0 > M1
+ *  - SGPCR: always park on last master
+ *  - MGPCR: restore default values
+ */
+.macro init_max mpr=0x00302154, sgpcr=0x00000010, mgpcr=0x00000000
+	ldr	r0, =MAX_BASE_ADDR
+	ldr	r1, =\mpr
+	str	r1, [r0, #MAX_MPR0]	/* for S0 */
+	str	r1, [r0, #MAX_MPR1]	/* for S1 */
+	str	r1, [r0, #MAX_MPR2]	/* for S2 */
+	str	r1, [r0, #MAX_MPR3]	/* for S3 */
+	str	r1, [r0, #MAX_MPR4]	/* for S4 */
+	ldr	r1, =\sgpcr
+	str	r1, [r0, #MAX_SGPCR0]	/* for S0 */
+	str	r1, [r0, #MAX_SGPCR1]	/* for S1 */
+	str	r1, [r0, #MAX_SGPCR2]	/* for S2 */
+	str	r1, [r0, #MAX_SGPCR3]	/* for S3 */
+	str	r1, [r0, #MAX_SGPCR4]	/* for S4 */
+	ldr	r1, =\mgpcr
+	str	r1, [r0, #MAX_MGPCR0]	/* for M0 */
+	str	r1, [r0, #MAX_MGPCR1]	/* for M1 */
+	str	r1, [r0, #MAX_MGPCR2]	/* for M2 */
+	str	r1, [r0, #MAX_MGPCR3]	/* for M3 */
+	str	r1, [r0, #MAX_MGPCR4]	/* for M4 */
+	str	r1, [r0, #MAX_MGPCR5]	/* for M5 */
 .endm
 
-/* M3IF setup */
-.macro init_m3if
-	/* Configure M3IF registers */
-	ldr r1, =M3IF_BASE_ADDR
-	/*
-	* M3IF Control Register (M3IFCTL)
-	* MRRP[0] = L2CC0 not on priority list (0 << 0)	= 0x00000000
-	* MRRP[1] = L2CC1 not on priority list (0 << 0)	= 0x00000000
-	* MRRP[2] = MBX not on priority list (0 << 0)	= 0x00000000
-	* MRRP[3] = MAX1 not on priority list (0 << 0)	= 0x00000000
-	* MRRP[4] = SDMA not on priority list (0 << 0)	= 0x00000000
-	* MRRP[5] = MPEG4 not on priority list (0 << 0)	= 0x00000000
-	* MRRP[6] = IPU1 on priority list (1 << 6)	= 0x00000040
-	* MRRP[7] = IPU2 not on priority list (0 << 0)	= 0x00000000
-	*						------------
-	*						  0x00000040
-	*/
-	ldr r0, =M3IF_CONFIG
-	str r0, [r1]  /* M3IF control reg */
+/*
+ * M3IF setup
+ *
+ * Default argument values:
+ *  - CTL:
+ * MRRP[0] = L2CC0 not on priority list (0 << 0)	= 0x00000000
+ * MRRP[1] = L2CC1 not on priority list (0 << 1)	= 0x00000000
+ * MRRP[2] = MBX not on priority list (0 << 2)		= 0x00000000
+ * MRRP[3] = MAX1 not on priority list (0 << 3)		= 0x00000000
+ * MRRP[4] = SDMA not on priority list (0 << 4)		= 0x00000000
+ * MRRP[5] = MPEG4 not on priority list (0 << 5)	= 0x00000000
+ * MRRP[6] = IPU1 on priority list (1 << 6)		= 0x00000040
+ * MRRP[7] = IPU2 not on priority list (0 << 7)		= 0x00000000
+ *							------------
+ *							  0x00000040
+ */
+.macro init_m3if ctl=0x00000040
+	/* M3IF Control Register (M3IFCTL) */
+	write32	M3IF_BASE_ADDR, \ctl
 .endm
 
 .macro core_init
-	mrc 15, 0, r1, c1, c0, 0
+	mrc	p15, 0, r1, c1, c0, 0
 
-	mrc 15, 0, r0, c1, c0, 1
-	orr r0, r0, #7
-	mcr 15, 0, r0, c1, c0, 1
-	orr r1, r1, #(1<<11)
+	/* Set branch prediction enable */
+	mrc	p15, 0, r0, c1, c0, 1
+	orr	r0, r0, #7
+	mcr	p15, 0, r0, c1, c0, 1
+	orr	r1, r1, #1 << 11
 
 	/* Set unaligned access enable */
-	orr r1, r1, #(1<<22)
+	orr	r1, r1, #1 << 22
 
 	/* Set low int latency enable */
-	orr r1, r1, #(1<<21)
+	orr	r1, r1, #1 << 21
 
-	mcr 15, 0, r1, c1, c0, 0
+	mcr	p15, 0, r1, c1, c0, 0
 
-	mov r0, #0
+	mov	r0, #0
 
-	/* Set branch prediction enable */
-	mcr 15, 0, r0, c15, c2, 4
+	mcr	p15, 0, r0, c15, c2, 4
 
-	mcr 15, 0, r0, c7, c7, 0        /* invalidate I cache and D cache */
-	mcr 15, 0, r0, c8, c7, 0        /* invalidate TLBs */
-	mcr 15, 0, r0, c7, c10, 4       /* Drain the write buffer */
+	mcr	p15, 0, r0, c7, c7, 0	/* Invalidate I cache and D cache */
+	mcr	p15, 0, r0, c8, c7, 0	/* Invalidate TLBs */
+	mcr	p15, 0, r0, c7, c10, 4	/* Drain the write buffer */
 
-	/*
-	 * initializes very early AIPS
-	 * Then it also initializes Multi-Layer AHB Crossbar Switch,
-	 * M3IF
-	 * Also setup the Peripheral Port Remap register inside the core
-	 */
-	ldr r0, =0x40000015        /* start from AIPS 2GB region */
-	mcr p15, 0, r0, c15, c2, 4
+	/* Setup the Peripheral Port Memory Remap Register */
+	ldr	r0, =0x40000015		/* Start from AIPS 2-GB region */
+	mcr	p15, 0, r0, c15, c2, 4
 .endm

arch/arm/include/asm/arch-mx5/imx-regs.h

@@ -308,6 +308,10 @@
 #define DP_MFD_400	(3 - 1)
 #define DP_MFN_400	1
 
+#define DP_OP_455	((9 << 4) + ((2 - 1)  << 0))
+#define DP_MFD_455	(48 - 1)
+#define DP_MFN_455	23
+
 #define DP_OP_216	((6 << 4) + ((3 - 1)  << 0))
 #define DP_MFD_216	(4 - 1)
 #define DP_MFN_216	3

arch/arm/include/asm/arch-mx6/imx-regs.h

@@ -200,6 +200,12 @@ struct src {
 	u32     gpr10;
 };
 
+/* OCOTP Registers */
+struct ocotp_regs {
+	u32	reserved[0x198];
+	u32	gp1;	/* 0x660 */
+};
+
 /* GPR3 bitfields */
 #define IOMUXC_GPR3_GPU_DBG_OFFSET		29
 #define IOMUXC_GPR3_GPU_DBG_MASK		(3<<IOMUXC_GPR3_GPU_DBG_OFFSET)

arch/arm/include/asm/arch-mx6/mx6x_pins.h

@@ -530,20 +530,20 @@ enum {
 	MX6Q_PAD_EIM_BCLK__IPU1_DI1_PIN16	= IOMUX_PAD(0x046C, 0x0158, 1, 0x0000, 0, 0),
 	MX6Q_PAD_EIM_BCLK__GPIO_6_31		= IOMUX_PAD(0x046C, 0x0158, 5, 0x0000, 0, 0),
 	MX6Q_PAD_EIM_BCLK__TPSMP_HDATA_31	= IOMUX_PAD(0x046C, 0x0158, 6, 0x0000, 0, 0),
-	MX6Q_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK = IOMUX_PAD(0x0470, 0x015C, 0, 0x0000, 0, 0),
+	MX6Q_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK = IOMUX_PAD(0x0470, 0x015C, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
 	MX6Q_PAD_DI0_DISP_CLK__IPU2_DI0_DISP_CLK = IOMUX_PAD(0x0470, 0x015C, 1, 0x0000, 0, 0),
 	MX6Q_PAD_DI0_DISP_CLK__MIPI_CR_DPY_OT28 = IOMUX_PAD(0x0470, 0x015C, 3, 0x0000, 0, 0),
 	MX6Q_PAD_DI0_DISP_CLK__SDMA_DBG_CR_STA0 = IOMUX_PAD(0x0470, 0x015C, 4, 0x0000, 0, 0),
 	MX6Q_PAD_DI0_DISP_CLK__GPIO_4_16	= IOMUX_PAD(0x0470, 0x015C, 5, 0x0000, 0, 0),
 	MX6Q_PAD_DI0_DISP_CLK__MMDC_DEBUG_0	= IOMUX_PAD(0x0470, 0x015C, 6, 0x0000, 0, 0),
-	MX6Q_PAD_DI0_PIN15__IPU1_DI0_PIN15	= IOMUX_PAD(0x0474, 0x0160, 0, 0x0000, 0, 0),
+	MX6Q_PAD_DI0_PIN15__IPU1_DI0_PIN15	= IOMUX_PAD(0x0474, 0x0160, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
 	MX6Q_PAD_DI0_PIN15__IPU2_DI0_PIN15	= IOMUX_PAD(0x0474, 0x0160, 1, 0x0000, 0, 0),
 	MX6Q_PAD_DI0_PIN15__AUDMUX_AUD6_TXC	= IOMUX_PAD(0x0474, 0x0160, 2, 0x0000, 0, 0),
 	MX6Q_PAD_DI0_PIN15__MIPI_CR_DPHY_OUT_29 = IOMUX_PAD(0x0474, 0x0160, 3, 0x0000, 0, 0),
 	MX6Q_PAD_DI0_PIN15__SDMA_DBG_CORE_STA_1 = IOMUX_PAD(0x0474, 0x0160, 4, 0x0000, 0, 0),
 	MX6Q_PAD_DI0_PIN15__GPIO_4_17		= IOMUX_PAD(0x0474, 0x0160, 5, 0x0000, 0, 0),
 	MX6Q_PAD_DI0_PIN15__MMDC_MMDC_DEBUG_1	= IOMUX_PAD(0x0474, 0x0160, 6, 0x0000, 0, 0),
-	MX6Q_PAD_DI0_PIN2__IPU1_DI0_PIN2	= IOMUX_PAD(0x0478, 0x0164, 0, 0x0000, 0, 0),
+	MX6Q_PAD_DI0_PIN2__IPU1_DI0_PIN2	= IOMUX_PAD(0x0478, 0x0164, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
 	MX6Q_PAD_DI0_PIN2__IPU2_DI0_PIN2	= IOMUX_PAD(0x0478, 0x0164, 1, 0x0000, 0, 0),
 	MX6Q_PAD_DI0_PIN2__AUDMUX_AUD6_TXD	= IOMUX_PAD(0x0478, 0x0164, 2, 0x0000, 0, 0),
 	MX6Q_PAD_DI0_PIN2__MIPI_CR_DPHY_OUT_30	= IOMUX_PAD(0x0478, 0x0164, 3, 0x0000, 0, 0),
@@ -551,7 +551,7 @@ enum {
 	MX6Q_PAD_DI0_PIN2__GPIO_4_18		= IOMUX_PAD(0x0478, 0x0164, 5, 0x0000, 0, 0),
 	MX6Q_PAD_DI0_PIN2__MMDC_DEBUG_2		= IOMUX_PAD(0x0478, 0x0164, 6, 0x0000, 0, 0),
 	MX6Q_PAD_DI0_PIN2__PL301_PER1_HADDR_9	= IOMUX_PAD(0x0478, 0x0164, 7, 0x0000, 0, 0),
-	MX6Q_PAD_DI0_PIN3__IPU1_DI0_PIN3	= IOMUX_PAD(0x047C, 0x0168, 0, 0x0000, 0, 0),
+	MX6Q_PAD_DI0_PIN3__IPU1_DI0_PIN3	= IOMUX_PAD(0x047C, 0x0168, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
 	MX6Q_PAD_DI0_PIN3__IPU2_DI0_PIN3	= IOMUX_PAD(0x047C, 0x0168, 1, 0x0000, 0, 0),
 	MX6Q_PAD_DI0_PIN3__AUDMUX_AUD6_TXFS	= IOMUX_PAD(0x047C, 0x0168, 2, 0x0000, 0, 0),
 	MX6Q_PAD_DI0_PIN3__MIPI_CORE_DPHY_OUT31 = IOMUX_PAD(0x047C, 0x0168, 3, 0x0000, 0, 0),
@@ -564,17 +564,17 @@ enum {
 	MX6Q_PAD_DI0_PIN4__AUDMUX_AUD6_RXD	= IOMUX_PAD(0x0480, 0x016C, 2, 0x0000, 0, 0),
 	MX6Q_PAD_DI0_PIN4__USDHC1_WP		= IOMUX_PAD(0x0480, 0x016C, 3, 0x094C, 0, 0),
 	MX6Q_PAD_DI0_PIN4__SDMA_DEBUG_YIELD	= IOMUX_PAD(0x0480, 0x016C, 4, 0x0000, 0, 0),
-	MX6Q_PAD_DI0_PIN4__GPIO_4_20		= IOMUX_PAD(0x0480, 0x016C, 5, 0x0000, 0, 0),
+	MX6Q_PAD_DI0_PIN4__GPIO_4_20		= IOMUX_PAD(0x0480, 0x016C, 5, 0x0000, 0, PAD_CTL_DSE_120ohm),
 	MX6Q_PAD_DI0_PIN4__MMDC_MMDC_DEBUG_4	= IOMUX_PAD(0x0480, 0x016C, 6, 0x0000, 0, 0),
 	MX6Q_PAD_DI0_PIN4__PL301_PER1_HADDR_11  = IOMUX_PAD(0x0480, 0x016C, 7, 0x0000, 0, 0),
-	MX6Q_PAD_DISP0_DAT0__IPU1_DISP0_DAT_0	= IOMUX_PAD(0x0484, 0x0170, 0, 0x0000, 0, 0),
+	MX6Q_PAD_DISP0_DAT0__IPU1_DISP0_DAT_0	= IOMUX_PAD(0x0484, 0x0170, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
 	MX6Q_PAD_DISP0_DAT0__IPU2_DISP0_DAT_0	= IOMUX_PAD(0x0484, 0x0170, 1, 0x0000, 0, 0),
 	MX6Q_PAD_DISP0_DAT0__ECSPI3_SCLK	= IOMUX_PAD(0x0484, 0x0170, 2, 0x0000, 0, 0),
 	MX6Q_PAD_DISP0_DAT0__USDHC1_USDHC_DBG_0 = IOMUX_PAD(0x0484, 0x0170, 3, 0x0000, 0, 0),
 	MX6Q_PAD_DISP0_DAT0__SDMA_DBG_CORE_RUN	= IOMUX_PAD(0x0484, 0x0170, 4, 0x0000, 0, 0),
 	MX6Q_PAD_DISP0_DAT0__GPIO_4_21		= IOMUX_PAD(0x0484, 0x0170, 5, 0x0000, 0, 0),
 	MX6Q_PAD_DISP0_DAT0__MMDC_MMDC_DEBUG_5	= IOMUX_PAD(0x0484, 0x0170, 6, 0x0000, 0, 0),
-	MX6Q_PAD_DISP0_DAT1__IPU1_DISP0_DAT_1	= IOMUX_PAD(0x0488, 0x0174, 0, 0x0000, 0, 0),
+	MX6Q_PAD_DISP0_DAT1__IPU1_DISP0_DAT_1	= IOMUX_PAD(0x0488, 0x0174, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
 	MX6Q_PAD_DISP0_DAT1__IPU2_DISP0_DAT_1	= IOMUX_PAD(0x0488, 0x0174, 1, 0x0000, 0, 0),
 	MX6Q_PAD_DISP0_DAT1__ECSPI3_MOSI	= IOMUX_PAD(0x0488, 0x0174, 2, 0x0000, 0, 0),
 	MX6Q_PAD_DISP0_DAT1__USDHC1_USDHC_DBG_1 = IOMUX_PAD(0x0488, 0x0174, 3, 0x0000, 0, 0),
@@ -582,7 +582,7 @@ enum {
 	MX6Q_PAD_DISP0_DAT1__GPIO_4_22		= IOMUX_PAD(0x0488, 0x0174, 5, 0x0000, 0, 0),
 	MX6Q_PAD_DISP0_DAT1__MMDC_DEBUG_6	= IOMUX_PAD(0x0488, 0x0174, 6, 0x0000, 0, 0),
 	MX6Q_PAD_DISP0_DAT1__PL301_PER1_HADR_12 = IOMUX_PAD(0x0488, 0x0174, 7, 0x0000, 0, 0),
-	MX6Q_PAD_DISP0_DAT2__IPU1_DISP0_DAT_2	= IOMUX_PAD(0x048C, 0x0178, 0, 0x0000, 0, 0),
+	MX6Q_PAD_DISP0_DAT2__IPU1_DISP0_DAT_2	= IOMUX_PAD(0x048C, 0x0178, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
 	MX6Q_PAD_DISP0_DAT2__IPU2_DISP0_DAT_2	= IOMUX_PAD(0x048C, 0x0178, 1, 0x0000, 0, 0),
 	MX6Q_PAD_DISP0_DAT2__ECSPI3_MISO	= IOMUX_PAD(0x048C, 0x0178, 2, 0x0000, 0, 0),
 	MX6Q_PAD_DISP0_DAT2__USDHC1_USDHC_DBG_2 = IOMUX_PAD(0x048C, 0x0178, 3, 0x0000, 0, 0),
@@ -590,7 +590,7 @@ enum {
 	MX6Q_PAD_DISP0_DAT2__GPIO_4_23		= IOMUX_PAD(0x048C, 0x0178, 5, 0x0000, 0, 0),
 	MX6Q_PAD_DISP0_DAT2__MMDC_DEBUG_7	= IOMUX_PAD(0x048C, 0x0178, 6, 0x0000, 0, 0),
 	MX6Q_PAD_DISP0_DAT2__PL301_PER1_HADR_13 = IOMUX_PAD(0x048C, 0x0178, 7, 0x0000, 0, 0),
-	MX6Q_PAD_DISP0_DAT3__IPU1_DISP0_DAT_3	= IOMUX_PAD(0x0490, 0x017C, 0, 0x0000, 0, 0),
+	MX6Q_PAD_DISP0_DAT3__IPU1_DISP0_DAT_3	= IOMUX_PAD(0x0490, 0x017C, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
 	MX6Q_PAD_DISP0_DAT3__IPU2_DISP0_DAT_3	= IOMUX_PAD(0x0490, 0x017C, 1, 0x0000, 0, 0),
 	MX6Q_PAD_DISP0_DAT3__ECSPI3_SS0		= IOMUX_PAD(0x0490, 0x017C, 2, 0x0000, 0, 0),
 	MX6Q_PAD_DISP0_DAT3__USDHC1_USDHC_DBG_3 = IOMUX_PAD(0x0490, 0x017C, 3, 0x0000, 0, 0),
@@ -598,7 +598,7 @@ enum {
 	MX6Q_PAD_DISP0_DAT3__GPIO_4_24		= IOMUX_PAD(0x0490, 0x017C, 5, 0x0000, 0, 0),
 	MX6Q_PAD_DISP0_DAT3__MMDC_MMDC_DBG_8	= IOMUX_PAD(0x0490, 0x017C, 6, 0x0000, 0, 0),
 	MX6Q_PAD_DISP0_DAT3__PL301_PER1_HADR_14 = IOMUX_PAD(0x0490, 0x017C, 7, 0x0000, 0, 0),
-	MX6Q_PAD_DISP0_DAT4__IPU1_DISP0_DAT_4	= IOMUX_PAD(0x0494, 0x0180, 0, 0x0000, 0, 0),
+	MX6Q_PAD_DISP0_DAT4__IPU1_DISP0_DAT_4	= IOMUX_PAD(0x0494, 0x0180, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
 	MX6Q_PAD_DISP0_DAT4__IPU2_DISP0_DAT_4	= IOMUX_PAD(0x0494, 0x0180, 1, 0x0000, 0, 0),
 	MX6Q_PAD_DISP0_DAT4__ECSPI3_SS1		= IOMUX_PAD(0x0494, 0x0180, 2, 0x0000, 0, 0),
 	MX6Q_PAD_DISP0_DAT4__USDHC1_USDHC_DBG_4	= IOMUX_PAD(0x0494, 0x0180, 3, 0x0000, 0, 0),
@@ -606,7 +606,7 @@ enum {
 	MX6Q_PAD_DISP0_DAT4__GPIO_4_25		= IOMUX_PAD(0x0494, 0x0180, 5, 0x0000, 0, 0),
 	MX6Q_PAD_DISP0_DAT4__MMDC_MMDC_DEBUG_9	= IOMUX_PAD(0x0494, 0x0180, 6, 0x0000, 0, 0),
 	MX6Q_PAD_DISP0_DAT4__PL301_PER1_HADR_15	= IOMUX_PAD(0x0494, 0x0180, 7, 0x0000, 0, 0),
-	MX6Q_PAD_DISP0_DAT5__IPU1_DISP0_DAT_5	= IOMUX_PAD(0x0498, 0x0184, 0, 0x0000, 0, 0),
+	MX6Q_PAD_DISP0_DAT5__IPU1_DISP0_DAT_5	= IOMUX_PAD(0x0498, 0x0184, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
 	MX6Q_PAD_DISP0_DAT5__IPU2_DISP0_DAT_5	= IOMUX_PAD(0x0498, 0x0184, 1, 0x0000, 0, 0),
 	MX6Q_PAD_DISP0_DAT5__ECSPI3_SS2		= IOMUX_PAD(0x0498, 0x0184, 2, 0x0000, 0, 0),
 	MX6Q_PAD_DISP0_DAT5__AUDMUX_AUD6_RXFS	= IOMUX_PAD(0x0498, 0x0184, 3, 0x0000, 0, 0),
@@ -614,7 +614,7 @@ enum {
 	MX6Q_PAD_DISP0_DAT5__GPIO_4_26		= IOMUX_PAD(0x0498, 0x0184, 5, 0x0000, 0, 0),
 	MX6Q_PAD_DISP0_DAT5__MMDC_DEBUG_10	= IOMUX_PAD(0x0498, 0x0184, 6, 0x0000, 0, 0),
 	MX6Q_PAD_DISP0_DAT5__PL301_PER1_HADR_16 = IOMUX_PAD(0x0498, 0x0184, 7, 0x0000, 0, 0),
-	MX6Q_PAD_DISP0_DAT6__IPU1_DISP0_DAT_6	= IOMUX_PAD(0x049C, 0x0188, 0, 0x0000, 0, 0),
+	MX6Q_PAD_DISP0_DAT6__IPU1_DISP0_DAT_6	= IOMUX_PAD(0x049C, 0x0188, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
 	MX6Q_PAD_DISP0_DAT6__IPU2_DISP0_DAT_6	= IOMUX_PAD(0x049C, 0x0188, 1, 0x0000, 0, 0),
 	MX6Q_PAD_DISP0_DAT6__ECSPI3_SS3		= IOMUX_PAD(0x049C, 0x0188, 2, 0x0000, 0, 0),
 	MX6Q_PAD_DISP0_DAT6__AUDMUX_AUD6_RXC	= IOMUX_PAD(0x049C, 0x0188, 3, 0x0000, 0, 0),
@@ -622,7 +622,7 @@ enum {
 	MX6Q_PAD_DISP0_DAT6__GPIO_4_27		= IOMUX_PAD(0x049C, 0x0188, 5, 0x0000, 0, 0),
 	MX6Q_PAD_DISP0_DAT6__MMDC_DEBUG_11	= IOMUX_PAD(0x049C, 0x0188, 6, 0x0000, 0, 0),
 	MX6Q_PAD_DISP0_DAT6__PL301_PER1_HADR_17 = IOMUX_PAD(0x049C, 0x0188, 7, 0x0000, 0, 0),
-	MX6Q_PAD_DISP0_DAT7__IPU1_DISP0_DAT_7	= IOMUX_PAD(0x04A0, 0x018C, 0, 0x0000, 0, 0),
+	MX6Q_PAD_DISP0_DAT7__IPU1_DISP0_DAT_7	= IOMUX_PAD(0x04A0, 0x018C, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
 	MX6Q_PAD_DISP0_DAT7__IPU2_DISP0_DAT_7	= IOMUX_PAD(0x04A0, 0x018C, 1, 0x0000, 0, 0),
 	MX6Q_PAD_DISP0_DAT7__ECSPI3_RDY		= IOMUX_PAD(0x04A0, 0x018C, 2, 0x0000, 0, 0),
 	MX6Q_PAD_DISP0_DAT7__USDHC1_USDHC_DBG_5 = IOMUX_PAD(0x04A0, 0x018C, 3, 0x0000, 0, 0),
@@ -630,7 +630,7 @@ enum {
 	MX6Q_PAD_DISP0_DAT7__GPIO_4_28		= IOMUX_PAD(0x04A0, 0x018C, 5, 0x0000, 0, 0),
 	MX6Q_PAD_DISP0_DAT7__MMDC_DEBUG_12	= IOMUX_PAD(0x04A0, 0x018C, 6, 0x0000, 0, 0),
 	MX6Q_PAD_DISP0_DAT7__PL301_PER1_HADR_18 = IOMUX_PAD(0x04A0, 0x018C, 7, 0x0000, 0, 0),
-	MX6Q_PAD_DISP0_DAT8__IPU1_DISP0_DAT_8	= IOMUX_PAD(0x04A4, 0x0190, 0, 0x0000, 0, 0),
+	MX6Q_PAD_DISP0_DAT8__IPU1_DISP0_DAT_8	= IOMUX_PAD(0x04A4, 0x0190, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
 	MX6Q_PAD_DISP0_DAT8__IPU2_DISP0_DAT_8	= IOMUX_PAD(0x04A4, 0x0190, 1, 0x0000, 0, 0),
 	MX6Q_PAD_DISP0_DAT8__PWM1_PWMO		= IOMUX_PAD(0x04A4, 0x0190, 2, 0x0000, 0, 0),
 	MX6Q_PAD_DISP0_DAT8__WDOG1_WDOG_B	= IOMUX_PAD(0x04A4, 0x0190, 3, 0x0000, 0, 0),
@@ -638,7 +638,7 @@ enum {
 	MX6Q_PAD_DISP0_DAT8__GPIO_4_29		= IOMUX_PAD(0x04A4, 0x0190, 5, 0x0000, 0, 0),
 	MX6Q_PAD_DISP0_DAT8__MMDC_DEBUG_13	= IOMUX_PAD(0x04A4, 0x0190, 6, 0x0000, 0, 0),
 	MX6Q_PAD_DISP0_DAT8__PL301_PER1_HADR_19 = IOMUX_PAD(0x04A4, 0x0190, 7, 0x0000, 0, 0),
-	MX6Q_PAD_DISP0_DAT9__IPU1_DISP0_DAT_9	= IOMUX_PAD(0x04A8, 0x0194, 0, 0x0000, 0, 0),
+	MX6Q_PAD_DISP0_DAT9__IPU1_DISP0_DAT_9	= IOMUX_PAD(0x04A8, 0x0194, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
 	MX6Q_PAD_DISP0_DAT9__IPU2_DISP0_DAT_9	= IOMUX_PAD(0x04A8, 0x0194, 1, 0x0000, 0, 0),
 	MX6Q_PAD_DISP0_DAT9__PWM2_PWMO		= IOMUX_PAD(0x04A8, 0x0194, 2, 0x0000, 0, 0),
 	MX6Q_PAD_DISP0_DAT9__WDOG2_WDOG_B	= IOMUX_PAD(0x04A8, 0x0194, 3, 0x0000, 0, 0),
@@ -646,41 +646,41 @@ enum {
 	MX6Q_PAD_DISP0_DAT9__GPIO_4_30		= IOMUX_PAD(0x04A8, 0x0194, 5, 0x0000, 0, 0),
 	MX6Q_PAD_DISP0_DAT9__MMDC_DEBUG_14	= IOMUX_PAD(0x04A8, 0x0194, 6, 0x0000, 0, 0),
 	MX6Q_PAD_DISP0_DAT9__PL301_PER1_HADR_20 = IOMUX_PAD(0x04A8, 0x0194, 7, 0x0000, 0, 0),
-	MX6Q_PAD_DISP0_DAT10__IPU1_DISP0_DAT_10	= IOMUX_PAD(0x04AC, 0x0198, 0, 0x0000, 0, 0),
+	MX6Q_PAD_DISP0_DAT10__IPU1_DISP0_DAT_10	= IOMUX_PAD(0x04AC, 0x0198, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
 	MX6Q_PAD_DISP0_DAT10__IPU2_DISP0_DAT_10	= IOMUX_PAD(0x04AC, 0x0198, 1, 0x0000, 0, 0),
 	MX6Q_PAD_DISP0_DAT10__USDHC1_DBG_6	= IOMUX_PAD(0x04AC, 0x0198, 3, 0x0000, 0, 0),
 	MX6Q_PAD_DISP0_DAT10__SDMA_DBG_EVT_CHN3 = IOMUX_PAD(0x04AC, 0x0198, 4, 0x0000, 0, 0),
 	MX6Q_PAD_DISP0_DAT10__GPIO_4_31		= IOMUX_PAD(0x04AC, 0x0198, 5, 0x0000, 0, 0),
 	MX6Q_PAD_DISP0_DAT10__MMDC_DEBUG_15	= IOMUX_PAD(0x04AC, 0x0198, 6, 0x0000, 0, 0),
 	MX6Q_PAD_DISP0_DAT10__PL301_PER1_HADR21 = IOMUX_PAD(0x04AC, 0x0198, 7, 0x0000, 0, 0),
-	MX6Q_PAD_DISP0_DAT11__IPU1_DISP0_DAT_11	= IOMUX_PAD(0x04B0, 0x019C, 0, 0x0000, 0, 0),
+	MX6Q_PAD_DISP0_DAT11__IPU1_DISP0_DAT_11	= IOMUX_PAD(0x04B0, 0x019C, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
 	MX6Q_PAD_DISP0_DAT11__IPU2_DISP0_DAT_11	= IOMUX_PAD(0x04B0, 0x019C, 1, 0x0000, 0, 0),
 	MX6Q_PAD_DISP0_DAT11__USDHC1_USDHC_DBG7 = IOMUX_PAD(0x04B0, 0x019C, 3, 0x0000, 0, 0),
 	MX6Q_PAD_DISP0_DAT11__SDMA_DBG_EVT_CHN4 = IOMUX_PAD(0x04B0, 0x019C, 4, 0x0000, 0, 0),
 	MX6Q_PAD_DISP0_DAT11__GPIO_5_5		= IOMUX_PAD(0x04B0, 0x019C, 5, 0x0000, 0, 0),
 	MX6Q_PAD_DISP0_DAT11__MMDC_DEBUG_16	= IOMUX_PAD(0x04B0, 0x019C, 6, 0x0000, 0, 0),
 	MX6Q_PAD_DISP0_DAT11__PL301_PER1_HADR22 = IOMUX_PAD(0x04B0, 0x019C, 7, 0x0000, 0, 0),
-	MX6Q_PAD_DISP0_DAT12__IPU1_DISP0_DAT_12	= IOMUX_PAD(0x04B4, 0x01A0, 0, 0x0000, 0, 0),
+	MX6Q_PAD_DISP0_DAT12__IPU1_DISP0_DAT_12	= IOMUX_PAD(0x04B4, 0x01A0, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
 	MX6Q_PAD_DISP0_DAT12__IPU2_DISP0_DAT_12	= IOMUX_PAD(0x04B4, 0x01A0, 1, 0x0000, 0, 0),
 	MX6Q_PAD_DISP0_DAT12__RESERVED_RESERVED	= IOMUX_PAD(0x04B4, 0x01A0, 3, 0x0000, 0, 0),
 	MX6Q_PAD_DISP0_DAT12__SDMA_DBG_EVT_CHN5 = IOMUX_PAD(0x04B4, 0x01A0, 4, 0x0000, 0, 0),
 	MX6Q_PAD_DISP0_DAT12__GPIO_5_6		= IOMUX_PAD(0x04B4, 0x01A0, 5, 0x0000, 0, 0),
 	MX6Q_PAD_DISP0_DAT12__MMDC_DEBUG_17	= IOMUX_PAD(0x04B4, 0x01A0, 6, 0x0000, 0, 0),
 	MX6Q_PAD_DISP0_DAT12__PL301_PER1_HADR23 = IOMUX_PAD(0x04B4, 0x01A0, 7, 0x0000, 0, 0),
-	MX6Q_PAD_DISP0_DAT13__IPU1_DISP0_DAT_13	= IOMUX_PAD(0x04B8, 0x01A4, 0, 0x0000, 0, 0),
+	MX6Q_PAD_DISP0_DAT13__IPU1_DISP0_DAT_13	= IOMUX_PAD(0x04B8, 0x01A4, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
 	MX6Q_PAD_DISP0_DAT13__IPU2_DISP0_DAT_13	= IOMUX_PAD(0x04B8, 0x01A4, 1, 0x0000, 0, 0),
 	MX6Q_PAD_DISP0_DAT13__AUDMUX_AUD5_RXFS	= IOMUX_PAD(0x04B8, 0x01A4, 3, 0x07D8, 1, 0),
 	MX6Q_PAD_DISP0_DAT13__SDMA_DBG_EVT_CHN0 = IOMUX_PAD(0x04B8, 0x01A4, 4, 0x0000, 0, 0),
 	MX6Q_PAD_DISP0_DAT13__GPIO_5_7		= IOMUX_PAD(0x04B8, 0x01A4, 5, 0x0000, 0, 0),
 	MX6Q_PAD_DISP0_DAT13__MMDC_DEBUG_18	= IOMUX_PAD(0x04B8, 0x01A4, 6, 0x0000, 0, 0),
 	MX6Q_PAD_DISP0_DAT13__PL301_PER1_HADR24 = IOMUX_PAD(0x04B8, 0x01A4, 7, 0x0000, 0, 0),
-	MX6Q_PAD_DISP0_DAT14__IPU1_DISP0_DAT_14	= IOMUX_PAD(0x04BC, 0x01A8, 0, 0x0000, 0, 0),
+	MX6Q_PAD_DISP0_DAT14__IPU1_DISP0_DAT_14	= IOMUX_PAD(0x04BC, 0x01A8, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
 	MX6Q_PAD_DISP0_DAT14__IPU2_DISP0_DAT_14	= IOMUX_PAD(0x04BC, 0x01A8, 1, 0x0000, 0, 0),
 	MX6Q_PAD_DISP0_DAT14__AUDMUX_AUD5_RXC	= IOMUX_PAD(0x04BC, 0x01A8, 3, 0x07D4, 1, 0),
 	MX6Q_PAD_DISP0_DAT14__SDMA_DBG_EVT_CHN1 = IOMUX_PAD(0x04BC, 0x01A8, 4, 0x0000, 0, 0),
 	MX6Q_PAD_DISP0_DAT14__GPIO_5_8		= IOMUX_PAD(0x04BC, 0x01A8, 5, 0x0000, 0, 0),
 	MX6Q_PAD_DISP0_DAT14__MMDC_DEBUG_19	= IOMUX_PAD(0x04BC, 0x01A8, 6, 0x0000, 0, 0),
-	MX6Q_PAD_DISP0_DAT15__IPU1_DISP0_DAT_15	= IOMUX_PAD(0x04C0, 0x01AC, 0, 0x0000, 0, 0),
+	MX6Q_PAD_DISP0_DAT15__IPU1_DISP0_DAT_15	= IOMUX_PAD(0x04C0, 0x01AC, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
 	MX6Q_PAD_DISP0_DAT15__IPU2_DISP0_DAT_15	= IOMUX_PAD(0x04C0, 0x01AC, 1, 0x0000, 0, 0),
 	MX6Q_PAD_DISP0_DAT15__ECSPI1_SS1	= IOMUX_PAD(0x04C0, 0x01AC, 2, 0x0804, 1, 0),
 	MX6Q_PAD_DISP0_DAT15__ECSPI2_SS1	= IOMUX_PAD(0x04C0, 0x01AC, 3, 0x0820, 1, 0),
@@ -688,7 +688,7 @@ enum {
 	MX6Q_PAD_DISP0_DAT15__GPIO_5_9		= IOMUX_PAD(0x04C0, 0x01AC, 5, 0x0000, 0, 0),
 	MX6Q_PAD_DISP0_DAT15__MMDC_DEBUG_20	= IOMUX_PAD(0x04C0, 0x01AC, 6, 0x0000, 0, 0),
 	MX6Q_PAD_DISP0_DAT15__PL301_PER1_HADR25 = IOMUX_PAD(0x04C0, 0x01AC, 7, 0x0000, 0, 0),
-	MX6Q_PAD_DISP0_DAT16__IPU1_DISP0_DAT_16	= IOMUX_PAD(0x04C4, 0x01B0, 0, 0x0000, 0, 0),
+	MX6Q_PAD_DISP0_DAT16__IPU1_DISP0_DAT_16	= IOMUX_PAD(0x04C4, 0x01B0, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
 	MX6Q_PAD_DISP0_DAT16__IPU2_DISP0_DAT_16	= IOMUX_PAD(0x04C4, 0x01B0, 1, 0x0000, 0, 0),
 	MX6Q_PAD_DISP0_DAT16__ECSPI2_MOSI	= IOMUX_PAD(0x04C4, 0x01B0, 2, 0x0818, 1, 0),
 	MX6Q_PAD_DISP0_DAT16__AUDMUX_AUD5_TXC	= IOMUX_PAD(0x04C4, 0x01B0, 3, 0x07DC, 0, 0),
@@ -696,7 +696,7 @@ enum {
 	MX6Q_PAD_DISP0_DAT16__GPIO_5_10		= IOMUX_PAD(0x04C4, 0x01B0, 5, 0x0000, 0, 0),
 	MX6Q_PAD_DISP0_DAT16__MMDC_DEBUG_21	= IOMUX_PAD(0x04C4, 0x01B0, 6, 0x0000, 0, 0),
 	MX6Q_PAD_DISP0_DAT16__PL301_PER1_HADR26 = IOMUX_PAD(0x04C4, 0x01B0, 7, 0x0000, 0, 0),
-	MX6Q_PAD_DISP0_DAT17__IPU1_DISP0_DAT_17	= IOMUX_PAD(0x04C8, 0x01B4, 0, 0x0000, 0, 0),
+	MX6Q_PAD_DISP0_DAT17__IPU1_DISP0_DAT_17	= IOMUX_PAD(0x04C8, 0x01B4, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
 	MX6Q_PAD_DISP0_DAT17__IPU2_DISP0_DAT_17	= IOMUX_PAD(0x04C8, 0x01B4, 1, 0x0000, 0, 0),
 	MX6Q_PAD_DISP0_DAT17__ECSPI2_MISO	= IOMUX_PAD(0x04C8, 0x01B4, 2, 0x0814, 1, 0),
 	MX6Q_PAD_DISP0_DAT17__AUDMUX_AUD5_TXD	= IOMUX_PAD(0x04C8, 0x01B4, 3, 0x07D0, 0, 0),
@@ -704,7 +704,7 @@ enum {
 	MX6Q_PAD_DISP0_DAT17__GPIO_5_11		= IOMUX_PAD(0x04C8, 0x01B4, 5, 0x0000, 0, 0),
 	MX6Q_PAD_DISP0_DAT17__MMDC_DEBUG_22	= IOMUX_PAD(0x04C8, 0x01B4, 6, 0x0000, 0, 0),
 	MX6Q_PAD_DISP0_DAT17__PL301_PER1_HADR27	= IOMUX_PAD(0x04C8, 0x01B4, 7, 0x0000, 0, 0),
-	MX6Q_PAD_DISP0_DAT18__IPU1_DISP0_DAT_18	= IOMUX_PAD(0x04CC, 0x01B8, 0, 0x0000, 0, 0),
+	MX6Q_PAD_DISP0_DAT18__IPU1_DISP0_DAT_18	= IOMUX_PAD(0x04CC, 0x01B8, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
 	MX6Q_PAD_DISP0_DAT18__IPU2_DISP0_DAT_18	= IOMUX_PAD(0x04CC, 0x01B8, 1, 0x0000, 0, 0),
 	MX6Q_PAD_DISP0_DAT18__ECSPI2_SS0	= IOMUX_PAD(0x04CC, 0x01B8, 2, 0x081C, 1, 0),
 	MX6Q_PAD_DISP0_DAT18__AUDMUX_AUD5_TXFS	= IOMUX_PAD(0x04CC, 0x01B8, 3, 0x07E0, 0, 0),
@@ -712,7 +712,7 @@ enum {
 	MX6Q_PAD_DISP0_DAT18__GPIO_5_12		= IOMUX_PAD(0x04CC, 0x01B8, 5, 0x0000, 0, 0),
 	MX6Q_PAD_DISP0_DAT18__MMDC_DEBUG_23	= IOMUX_PAD(0x04CC, 0x01B8, 6, 0x0000, 0, 0),
 	MX6Q_PAD_DISP0_DAT18__WEIM_WEIM_CS_2	= IOMUX_PAD(0x04CC, 0x01B8, 7, 0x0000, 0, 0),
-	MX6Q_PAD_DISP0_DAT19__IPU1_DISP0_DAT_19	= IOMUX_PAD(0x04D0, 0x01BC, 0, 0x0000, 0, 0),
+	MX6Q_PAD_DISP0_DAT19__IPU1_DISP0_DAT_19	= IOMUX_PAD(0x04D0, 0x01BC, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
 	MX6Q_PAD_DISP0_DAT19__IPU2_DISP0_DAT_19	= IOMUX_PAD(0x04D0, 0x01BC, 1, 0x0000, 0, 0),
 	MX6Q_PAD_DISP0_DAT19__ECSPI2_SCLK	= IOMUX_PAD(0x04D0, 0x01BC, 2, 0x0810, 1, 0),
 	MX6Q_PAD_DISP0_DAT19__AUDMUX_AUD5_RXD	= IOMUX_PAD(0x04D0, 0x01BC, 3, 0x07CC, 0, 0),
@@ -720,7 +720,7 @@ enum {
 	MX6Q_PAD_DISP0_DAT19__GPIO_5_13		= IOMUX_PAD(0x04D0, 0x01BC, 5, 0x0000, 0, 0),
 	MX6Q_PAD_DISP0_DAT19__MMDC_DEBUG_24	= IOMUX_PAD(0x04D0, 0x01BC, 6, 0x0000, 0, 0),
 	MX6Q_PAD_DISP0_DAT19__WEIM_WEIM_CS_3	= IOMUX_PAD(0x04D0, 0x01BC, 7, 0x0000, 0, 0),
-	MX6Q_PAD_DISP0_DAT20__IPU1_DISP0_DAT_20	= IOMUX_PAD(0x04D4, 0x01C0, 0, 0x0000, 0, 0),
+	MX6Q_PAD_DISP0_DAT20__IPU1_DISP0_DAT_20	= IOMUX_PAD(0x04D4, 0x01C0, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
 	MX6Q_PAD_DISP0_DAT20__IPU2_DISP0_DAT_20	= IOMUX_PAD(0x04D4, 0x01C0, 1, 0x0000, 0, 0),
 	MX6Q_PAD_DISP0_DAT20__ECSPI1_SCLK	= IOMUX_PAD(0x04D4, 0x01C0, 2, 0x07F4, 1, 0),
 	MX6Q_PAD_DISP0_DAT20__AUDMUX_AUD4_TXC	= IOMUX_PAD(0x04D4, 0x01C0, 3, 0x07C4, 0, 0),
@@ -728,7 +728,7 @@ enum {
 	MX6Q_PAD_DISP0_DAT20__GPIO_5_14		= IOMUX_PAD(0x04D4, 0x01C0, 5, 0x0000, 0, 0),
 	MX6Q_PAD_DISP0_DAT20__MMDC_DEBUG_25	= IOMUX_PAD(0x04D4, 0x01C0, 6, 0x0000, 0, 0),
 	MX6Q_PAD_DISP0_DAT20__PL301_PER1_HADR28 = IOMUX_PAD(0x04D4, 0x01C0, 7, 0x0000, 0, 0),
-	MX6Q_PAD_DISP0_DAT21__IPU1_DISP0_DAT_21	= IOMUX_PAD(0x04D8, 0x01C4, 0, 0x0000, 0, 0),
+	MX6Q_PAD_DISP0_DAT21__IPU1_DISP0_DAT_21	= IOMUX_PAD(0x04D8, 0x01C4, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
 	MX6Q_PAD_DISP0_DAT21__IPU2_DISP0_DAT_21	= IOMUX_PAD(0x04D8, 0x01C4, 1, 0x0000, 0, 0),
 	MX6Q_PAD_DISP0_DAT21__ECSPI1_MOSI	= IOMUX_PAD(0x04D8, 0x01C4, 2, 0x07FC, 1, 0),
 	MX6Q_PAD_DISP0_DAT21__AUDMUX_AUD4_TXD	= IOMUX_PAD(0x04D8, 0x01C4, 3, 0x07B8, 1, 0),
@@ -736,7 +736,7 @@ enum {
 	MX6Q_PAD_DISP0_DAT21__GPIO_5_15		= IOMUX_PAD(0x04D8, 0x01C4, 5, 0x0000, 0, 0),
 	MX6Q_PAD_DISP0_DAT21__MMDC_DEBUG_26	= IOMUX_PAD(0x04D8, 0x01C4, 6, 0x0000, 0, 0),
 	MX6Q_PAD_DISP0_DAT21__PL301_PER1_HADR29 = IOMUX_PAD(0x04D8, 0x01C4, 7, 0x0000, 0, 0),
-	MX6Q_PAD_DISP0_DAT22__IPU1_DISP0_DAT_22	= IOMUX_PAD(0x04DC, 0x01C8, 0, 0x0000, 0, 0),
+	MX6Q_PAD_DISP0_DAT22__IPU1_DISP0_DAT_22	= IOMUX_PAD(0x04DC, 0x01C8, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
 	MX6Q_PAD_DISP0_DAT22__IPU2_DISP0_DAT_22	= IOMUX_PAD(0x04DC, 0x01C8, 1, 0x0000, 0, 0),
 	MX6Q_PAD_DISP0_DAT22__ECSPI1_MISO	= IOMUX_PAD(0x04DC, 0x01C8, 2, 0x07F8, 1, 0),
 	MX6Q_PAD_DISP0_DAT22__AUDMUX_AUD4_TXFS	= IOMUX_PAD(0x04DC, 0x01C8, 3, 0x07C8, 1, 0),
@@ -744,7 +744,7 @@ enum {
 	MX6Q_PAD_DISP0_DAT22__GPIO_5_16		= IOMUX_PAD(0x04DC, 0x01C8, 5, 0x0000, 0, 0),
 	MX6Q_PAD_DISP0_DAT22__MMDC_DEBUG_27	= IOMUX_PAD(0x04DC, 0x01C8, 6, 0x0000, 0, 0),
 	MX6Q_PAD_DISP0_DAT22__PL301_PER1_HADR30 = IOMUX_PAD(0x04DC, 0x01C8, 7, 0x0000, 0, 0),
-	MX6Q_PAD_DISP0_DAT23__IPU1_DISP0_DAT_23	= IOMUX_PAD(0x04E0, 0x01CC, 0, 0x0000, 0, 0),
+	MX6Q_PAD_DISP0_DAT23__IPU1_DISP0_DAT_23	= IOMUX_PAD(0x04E0, 0x01CC, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
 	MX6Q_PAD_DISP0_DAT23__IPU2_DISP0_DAT_23	= IOMUX_PAD(0x04E0, 0x01CC, 1, 0x0000, 0, 0),
 	MX6Q_PAD_DISP0_DAT23__ECSPI1_SS0	= IOMUX_PAD(0x04E0, 0x01CC, 2, 0x0800, 1, 0),
 	MX6Q_PAD_DISP0_DAT23__AUDMUX_AUD4_RXD	= IOMUX_PAD(0x04E0, 0x01CC, 3, 0x07B4, 1, 0),

arch/arm/include/asm/arch-mx6/mxc_hdmi.h

@@ -0,0 +1,1053 @@
+/*
+ * Copyright (C) 2011 Freescale Semiconductor, Inc.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#ifndef __MXC_HDMI_H__
+#define __MXC_HDMI_H__
+
+/*
+ * Hdmi controller registers
+ */
+
+/* Identification Registers */
+#define HDMI_DESIGN_ID                          0x0000
+#define HDMI_REVISION_ID                        0x0001
+#define HDMI_PRODUCT_ID0                        0x0002
+#define HDMI_PRODUCT_ID1                        0x0003
+#define HDMI_CONFIG0_ID                         0x0004
+#define HDMI_CONFIG1_ID                         0x0005
+#define HDMI_CONFIG2_ID                         0x0006
+#define HDMI_CONFIG3_ID                         0x0007
+
+/* Interrupt Registers */
+#define HDMI_IH_FC_STAT0                        0x0100
+#define HDMI_IH_FC_STAT1                        0x0101
+#define HDMI_IH_FC_STAT2                        0x0102
+#define HDMI_IH_AS_STAT0                        0x0103
+#define HDMI_IH_PHY_STAT0                       0x0104
+#define HDMI_IH_I2CM_STAT0                      0x0105
+#define HDMI_IH_CEC_STAT0                       0x0106
+#define HDMI_IH_VP_STAT0                        0x0107
+#define HDMI_IH_I2CMPHY_STAT0                   0x0108
+#define HDMI_IH_AHBDMAAUD_STAT0                 0x0109
+
+#define HDMI_IH_MUTE_FC_STAT0                   0x0180
+#define HDMI_IH_MUTE_FC_STAT1                   0x0181
+#define HDMI_IH_MUTE_FC_STAT2                   0x0182
+#define HDMI_IH_MUTE_AS_STAT0                   0x0183
+#define HDMI_IH_MUTE_PHY_STAT0                  0x0184
+#define HDMI_IH_MUTE_I2CM_STAT0                 0x0185
+#define HDMI_IH_MUTE_CEC_STAT0                  0x0186
+#define HDMI_IH_MUTE_VP_STAT0                   0x0187
+#define HDMI_IH_MUTE_I2CMPHY_STAT0              0x0188
+#define HDMI_IH_MUTE_AHBDMAAUD_STAT0            0x0189
+#define HDMI_IH_MUTE                            0x01FF
+
+/* Video Sample Registers */
+#define HDMI_TX_INVID0                          0x0200
+#define HDMI_TX_INSTUFFING                      0x0201
+#define HDMI_TX_GYDATA0                         0x0202
+#define HDMI_TX_GYDATA1                         0x0203
+#define HDMI_TX_RCRDATA0                        0x0204
+#define HDMI_TX_RCRDATA1                        0x0205
+#define HDMI_TX_BCBDATA0                        0x0206
+#define HDMI_TX_BCBDATA1                        0x0207
+
+/* Video Packetizer Registers */
+#define HDMI_VP_STATUS                          0x0800
+#define HDMI_VP_PR_CD                           0x0801
+#define HDMI_VP_STUFF                           0x0802
+#define HDMI_VP_REMAP                           0x0803
+#define HDMI_VP_CONF                            0x0804
+#define HDMI_VP_STAT                            0x0805
+#define HDMI_VP_INT                             0x0806
+#define HDMI_VP_MASK                            0x0807
+#define HDMI_VP_POL                             0x0808
+
+/* Frame Composer Registers */
+#define HDMI_FC_INVIDCONF                       0x1000
+#define HDMI_FC_INHACTV0                        0x1001
+#define HDMI_FC_INHACTV1                        0x1002
+#define HDMI_FC_INHBLANK0                       0x1003
+#define HDMI_FC_INHBLANK1                       0x1004
+#define HDMI_FC_INVACTV0                        0x1005
+#define HDMI_FC_INVACTV1                        0x1006
+#define HDMI_FC_INVBLANK                        0x1007
+#define HDMI_FC_HSYNCINDELAY0                   0x1008
+#define HDMI_FC_HSYNCINDELAY1                   0x1009
+#define HDMI_FC_HSYNCINWIDTH0                   0x100A
+#define HDMI_FC_HSYNCINWIDTH1                   0x100B
+#define HDMI_FC_VSYNCINDELAY                    0x100C
+#define HDMI_FC_VSYNCINWIDTH                    0x100D
+#define HDMI_FC_INFREQ0                         0x100E
+#define HDMI_FC_INFREQ1                         0x100F
+#define HDMI_FC_INFREQ2                         0x1010
+#define HDMI_FC_CTRLDUR                         0x1011
+#define HDMI_FC_EXCTRLDUR                       0x1012
+#define HDMI_FC_EXCTRLSPAC                      0x1013
+#define HDMI_FC_CH0PREAM                        0x1014
+#define HDMI_FC_CH1PREAM                        0x1015
+#define HDMI_FC_CH2PREAM                        0x1016
+#define HDMI_FC_AVICONF3                        0x1017
+#define HDMI_FC_GCP                             0x1018
+#define HDMI_FC_AVICONF0                        0x1019
+#define HDMI_FC_AVICONF1                        0x101A
+#define HDMI_FC_AVICONF2                        0x101B
+#define HDMI_FC_AVIVID                          0x101C
+#define HDMI_FC_AVIETB0                         0x101D
+#define HDMI_FC_AVIETB1                         0x101E
+#define HDMI_FC_AVISBB0                         0x101F
+#define HDMI_FC_AVISBB1                         0x1020
+#define HDMI_FC_AVIELB0                         0x1021
+#define HDMI_FC_AVIELB1                         0x1022
+#define HDMI_FC_AVISRB0                         0x1023
+#define HDMI_FC_AVISRB1                         0x1024
+#define HDMI_FC_AUDICONF0                       0x1025
+#define HDMI_FC_AUDICONF1                       0x1026
+#define HDMI_FC_AUDICONF2                       0x1027
+#define HDMI_FC_AUDICONF3                       0x1028
+#define HDMI_FC_VSDIEEEID0                      0x1029
+#define HDMI_FC_VSDSIZE                         0x102A
+#define HDMI_FC_VSDIEEEID1                      0x1030
+#define HDMI_FC_VSDIEEEID2                      0x1031
+#define HDMI_FC_VSDPAYLOAD0                     0x1032
+#define HDMI_FC_VSDPAYLOAD1                     0x1033
+#define HDMI_FC_VSDPAYLOAD2                     0x1034
+#define HDMI_FC_VSDPAYLOAD3                     0x1035
+#define HDMI_FC_VSDPAYLOAD4                     0x1036
+#define HDMI_FC_VSDPAYLOAD5                     0x1037
+#define HDMI_FC_VSDPAYLOAD6                     0x1038
+#define HDMI_FC_VSDPAYLOAD7                     0x1039
+#define HDMI_FC_VSDPAYLOAD8                     0x103A
+#define HDMI_FC_VSDPAYLOAD9                     0x103B
+#define HDMI_FC_VSDPAYLOAD10                    0x103C
+#define HDMI_FC_VSDPAYLOAD11                    0x103D
+#define HDMI_FC_VSDPAYLOAD12                    0x103E
+#define HDMI_FC_VSDPAYLOAD13                    0x103F
+#define HDMI_FC_VSDPAYLOAD14                    0x1040
+#define HDMI_FC_VSDPAYLOAD15                    0x1041
+#define HDMI_FC_VSDPAYLOAD16                    0x1042
+#define HDMI_FC_VSDPAYLOAD17                    0x1043
+#define HDMI_FC_VSDPAYLOAD18                    0x1044
+#define HDMI_FC_VSDPAYLOAD19                    0x1045
+#define HDMI_FC_VSDPAYLOAD20                    0x1046
+#define HDMI_FC_VSDPAYLOAD21                    0x1047
+#define HDMI_FC_VSDPAYLOAD22                    0x1048
+#define HDMI_FC_VSDPAYLOAD23                    0x1049
+#define HDMI_FC_SPDVENDORNAME0                  0x104A
+#define HDMI_FC_SPDVENDORNAME1                  0x104B
+#define HDMI_FC_SPDVENDORNAME2                  0x104C
+#define HDMI_FC_SPDVENDORNAME3                  0x104D
+#define HDMI_FC_SPDVENDORNAME4                  0x104E
+#define HDMI_FC_SPDVENDORNAME5                  0x104F
+#define HDMI_FC_SPDVENDORNAME6                  0x1050
+#define HDMI_FC_SPDVENDORNAME7                  0x1051
+#define HDMI_FC_SDPPRODUCTNAME0                 0x1052
+#define HDMI_FC_SDPPRODUCTNAME1                 0x1053
+#define HDMI_FC_SDPPRODUCTNAME2                 0x1054
+#define HDMI_FC_SDPPRODUCTNAME3                 0x1055
+#define HDMI_FC_SDPPRODUCTNAME4                 0x1056
+#define HDMI_FC_SDPPRODUCTNAME5                 0x1057
+#define HDMI_FC_SDPPRODUCTNAME6                 0x1058
+#define HDMI_FC_SDPPRODUCTNAME7                 0x1059
+#define HDMI_FC_SDPPRODUCTNAME8                 0x105A
+#define HDMI_FC_SDPPRODUCTNAME9                 0x105B
+#define HDMI_FC_SDPPRODUCTNAME10                0x105C
+#define HDMI_FC_SDPPRODUCTNAME11                0x105D
+#define HDMI_FC_SDPPRODUCTNAME12                0x105E
+#define HDMI_FC_SDPPRODUCTNAME13                0x105F
+#define HDMI_FC_SDPPRODUCTNAME14                0x1060
+#define HDMI_FC_SPDPRODUCTNAME15                0x1061
+#define HDMI_FC_SPDDEVICEINF                    0x1062
+#define HDMI_FC_AUDSCONF                        0x1063
+#define HDMI_FC_AUDSSTAT                        0x1064
+#define HDMI_FC_DATACH0FILL                     0x1070
+#define HDMI_FC_DATACH1FILL                     0x1071
+#define HDMI_FC_DATACH2FILL                     0x1072
+#define HDMI_FC_CTRLQHIGH                       0x1073
+#define HDMI_FC_CTRLQLOW                        0x1074
+#define HDMI_FC_ACP0                            0x1075
+#define HDMI_FC_ACP28                           0x1076
+#define HDMI_FC_ACP27                           0x1077
+#define HDMI_FC_ACP26                           0x1078
+#define HDMI_FC_ACP25                           0x1079
+#define HDMI_FC_ACP24                           0x107A
+#define HDMI_FC_ACP23                           0x107B
+#define HDMI_FC_ACP22                           0x107C
+#define HDMI_FC_ACP21                           0x107D
+#define HDMI_FC_ACP20                           0x107E
+#define HDMI_FC_ACP19                           0x107F
+#define HDMI_FC_ACP18                           0x1080
+#define HDMI_FC_ACP17                           0x1081
+#define HDMI_FC_ACP16                           0x1082
+#define HDMI_FC_ACP15                           0x1083
+#define HDMI_FC_ACP14                           0x1084
+#define HDMI_FC_ACP13                           0x1085
+#define HDMI_FC_ACP12                           0x1086
+#define HDMI_FC_ACP11                           0x1087
+#define HDMI_FC_ACP10                           0x1088
+#define HDMI_FC_ACP9                            0x1089
+#define HDMI_FC_ACP8                            0x108A
+#define HDMI_FC_ACP7                            0x108B
+#define HDMI_FC_ACP6                            0x108C
+#define HDMI_FC_ACP5                            0x108D
+#define HDMI_FC_ACP4                            0x108E
+#define HDMI_FC_ACP3                            0x108F
+#define HDMI_FC_ACP2                            0x1090
+#define HDMI_FC_ACP1                            0x1091
+#define HDMI_FC_ISCR1_0                         0x1092
+#define HDMI_FC_ISCR1_16                        0x1093
+#define HDMI_FC_ISCR1_15                        0x1094
+#define HDMI_FC_ISCR1_14                        0x1095
+#define HDMI_FC_ISCR1_13                        0x1096
+#define HDMI_FC_ISCR1_12                        0x1097
+#define HDMI_FC_ISCR1_11                        0x1098
+#define HDMI_FC_ISCR1_10                        0x1099
+#define HDMI_FC_ISCR1_9                         0x109A
+#define HDMI_FC_ISCR1_8                         0x109B
+#define HDMI_FC_ISCR1_7                         0x109C
+#define HDMI_FC_ISCR1_6                         0x109D
+#define HDMI_FC_ISCR1_5                         0x109E
+#define HDMI_FC_ISCR1_4                         0x109F
+#define HDMI_FC_ISCR1_3                         0x10A0
+#define HDMI_FC_ISCR1_2                         0x10A1
+#define HDMI_FC_ISCR1_1                         0x10A2
+#define HDMI_FC_ISCR2_15                        0x10A3
+#define HDMI_FC_ISCR2_14                        0x10A4
+#define HDMI_FC_ISCR2_13                        0x10A5
+#define HDMI_FC_ISCR2_12                        0x10A6
+#define HDMI_FC_ISCR2_11                        0x10A7
+#define HDMI_FC_ISCR2_10                        0x10A8
+#define HDMI_FC_ISCR2_9                         0x10A9
+#define HDMI_FC_ISCR2_8                         0x10AA
+#define HDMI_FC_ISCR2_7                         0x10AB
+#define HDMI_FC_ISCR2_6                         0x10AC
+#define HDMI_FC_ISCR2_5                         0x10AD
+#define HDMI_FC_ISCR2_4                         0x10AE
+#define HDMI_FC_ISCR2_3                         0x10AF
+#define HDMI_FC_ISCR2_2                         0x10B0
+#define HDMI_FC_ISCR2_1                         0x10B1
+#define HDMI_FC_ISCR2_0                         0x10B2
+#define HDMI_FC_DATAUTO0                        0x10B3
+#define HDMI_FC_DATAUTO1                        0x10B4
+#define HDMI_FC_DATAUTO2                        0x10B5
+#define HDMI_FC_DATMAN                          0x10B6
+#define HDMI_FC_DATAUTO3                        0x10B7
+#define HDMI_FC_RDRB0                           0x10B8
+#define HDMI_FC_RDRB1                           0x10B9
+#define HDMI_FC_RDRB2                           0x10BA
+#define HDMI_FC_RDRB3                           0x10BB
+#define HDMI_FC_RDRB4                           0x10BC
+#define HDMI_FC_RDRB5                           0x10BD
+#define HDMI_FC_RDRB6                           0x10BE
+#define HDMI_FC_RDRB7                           0x10BF
+#define HDMI_FC_STAT0                           0x10D0
+#define HDMI_FC_INT0                            0x10D1
+#define HDMI_FC_MASK0                           0x10D2
+#define HDMI_FC_POL0                            0x10D3
+#define HDMI_FC_STAT1                           0x10D4
+#define HDMI_FC_INT1                            0x10D5
+#define HDMI_FC_MASK1                           0x10D6
+#define HDMI_FC_POL1                            0x10D7
+#define HDMI_FC_STAT2                           0x10D8
+#define HDMI_FC_INT2                            0x10D9
+#define HDMI_FC_MASK2                           0x10DA
+#define HDMI_FC_POL2                            0x10DB
+#define HDMI_FC_PRCONF                          0x10E0
+
+#define HDMI_FC_GMD_STAT                        0x1100
+#define HDMI_FC_GMD_EN                          0x1101
+#define HDMI_FC_GMD_UP                          0x1102
+#define HDMI_FC_GMD_CONF                        0x1103
+#define HDMI_FC_GMD_HB                          0x1104
+#define HDMI_FC_GMD_PB0                         0x1105
+#define HDMI_FC_GMD_PB1                         0x1106
+#define HDMI_FC_GMD_PB2                         0x1107
+#define HDMI_FC_GMD_PB3                         0x1108
+#define HDMI_FC_GMD_PB4                         0x1109
+#define HDMI_FC_GMD_PB5                         0x110A
+#define HDMI_FC_GMD_PB6                         0x110B
+#define HDMI_FC_GMD_PB7                         0x110C
+#define HDMI_FC_GMD_PB8                         0x110D
+#define HDMI_FC_GMD_PB9                         0x110E
+#define HDMI_FC_GMD_PB10                        0x110F
+#define HDMI_FC_GMD_PB11                        0x1110
+#define HDMI_FC_GMD_PB12                        0x1111
+#define HDMI_FC_GMD_PB13                        0x1112
+#define HDMI_FC_GMD_PB14                        0x1113
+#define HDMI_FC_GMD_PB15                        0x1114
+#define HDMI_FC_GMD_PB16                        0x1115
+#define HDMI_FC_GMD_PB17                        0x1116
+#define HDMI_FC_GMD_PB18                        0x1117
+#define HDMI_FC_GMD_PB19                        0x1118
+#define HDMI_FC_GMD_PB20                        0x1119
+#define HDMI_FC_GMD_PB21                        0x111A
+#define HDMI_FC_GMD_PB22                        0x111B
+#define HDMI_FC_GMD_PB23                        0x111C
+#define HDMI_FC_GMD_PB24                        0x111D
+#define HDMI_FC_GMD_PB25                        0x111E
+#define HDMI_FC_GMD_PB26                        0x111F
+#define HDMI_FC_GMD_PB27                        0x1120
+
+#define HDMI_FC_DBGFORCE                        0x1200
+#define HDMI_FC_DBGAUD0CH0                      0x1201
+#define HDMI_FC_DBGAUD1CH0                      0x1202
+#define HDMI_FC_DBGAUD2CH0                      0x1203
+#define HDMI_FC_DBGAUD0CH1                      0x1204
+#define HDMI_FC_DBGAUD1CH1                      0x1205
+#define HDMI_FC_DBGAUD2CH1                      0x1206
+#define HDMI_FC_DBGAUD0CH2                      0x1207
+#define HDMI_FC_DBGAUD1CH2                      0x1208
+#define HDMI_FC_DBGAUD2CH2                      0x1209
+#define HDMI_FC_DBGAUD0CH3                      0x120A
+#define HDMI_FC_DBGAUD1CH3                      0x120B
+#define HDMI_FC_DBGAUD2CH3                      0x120C
+#define HDMI_FC_DBGAUD0CH4                      0x120D
+#define HDMI_FC_DBGAUD1CH4                      0x120E
+#define HDMI_FC_DBGAUD2CH4                      0x120F
+#define HDMI_FC_DBGAUD0CH5                      0x1210
+#define HDMI_FC_DBGAUD1CH5                      0x1211
+#define HDMI_FC_DBGAUD2CH5                      0x1212
+#define HDMI_FC_DBGAUD0CH6                      0x1213
+#define HDMI_FC_DBGAUD1CH6                      0x1214
+#define HDMI_FC_DBGAUD2CH6                      0x1215
+#define HDMI_FC_DBGAUD0CH7                      0x1216
+#define HDMI_FC_DBGAUD1CH7                      0x1217
+#define HDMI_FC_DBGAUD2CH7                      0x1218
+#define HDMI_FC_DBGTMDS0                        0x1219
+#define HDMI_FC_DBGTMDS1                        0x121A
+#define HDMI_FC_DBGTMDS2                        0x121B
+
+/* HDMI Source PHY Registers */
+#define HDMI_PHY_CONF0                          0x3000
+#define HDMI_PHY_TST0                           0x3001
+#define HDMI_PHY_TST1                           0x3002
+#define HDMI_PHY_TST2                           0x3003
+#define HDMI_PHY_STAT0                          0x3004
+#define HDMI_PHY_INT0                           0x3005
+#define HDMI_PHY_MASK0                          0x3006
+#define HDMI_PHY_POL0                           0x3007
+
+/* HDMI Master PHY Registers */
+#define HDMI_PHY_I2CM_SLAVE_ADDR                0x3020
+#define HDMI_PHY_I2CM_ADDRESS_ADDR              0x3021
+#define HDMI_PHY_I2CM_DATAO_1_ADDR              0x3022
+#define HDMI_PHY_I2CM_DATAO_0_ADDR              0x3023
+#define HDMI_PHY_I2CM_DATAI_1_ADDR              0x3024
+#define HDMI_PHY_I2CM_DATAI_0_ADDR              0x3025
+#define HDMI_PHY_I2CM_OPERATION_ADDR            0x3026
+#define HDMI_PHY_I2CM_INT_ADDR                  0x3027
+#define HDMI_PHY_I2CM_CTLINT_ADDR               0x3028
+#define HDMI_PHY_I2CM_DIV_ADDR                  0x3029
+#define HDMI_PHY_I2CM_SOFTRSTZ_ADDR             0x302a
+#define HDMI_PHY_I2CM_SS_SCL_HCNT_1_ADDR        0x302b
+#define HDMI_PHY_I2CM_SS_SCL_HCNT_0_ADDR        0x302c
+#define HDMI_PHY_I2CM_SS_SCL_LCNT_1_ADDR        0x302d
+#define HDMI_PHY_I2CM_SS_SCL_LCNT_0_ADDR        0x302e
+#define HDMI_PHY_I2CM_FS_SCL_HCNT_1_ADDR        0x302f
+#define HDMI_PHY_I2CM_FS_SCL_HCNT_0_ADDR        0x3030
+#define HDMI_PHY_I2CM_FS_SCL_LCNT_1_ADDR        0x3031
+#define HDMI_PHY_I2CM_FS_SCL_LCNT_0_ADDR        0x3032
+
+/* Audio Sampler Registers */
+#define HDMI_AUD_CONF0                          0x3100
+#define HDMI_AUD_CONF1                          0x3101
+#define HDMI_AUD_INT                            0x3102
+#define HDMI_AUD_CONF2                          0x3103
+#define HDMI_AUD_N1                             0x3200
+#define HDMI_AUD_N2                             0x3201
+#define HDMI_AUD_N3                             0x3202
+#define HDMI_AUD_CTS1                           0x3203
+#define HDMI_AUD_CTS2                           0x3204
+#define HDMI_AUD_CTS3                           0x3205
+#define HDMI_AUD_INPUTCLKFS                     0x3206
+#define HDMI_AUD_SPDIFINT			0x3302
+#define HDMI_AUD_CONF0_HBR                      0x3400
+#define HDMI_AUD_HBR_STATUS                     0x3401
+#define HDMI_AUD_HBR_INT                        0x3402
+#define HDMI_AUD_HBR_POL                        0x3403
+#define HDMI_AUD_HBR_MASK                       0x3404
+
+/* Generic Parallel Audio Interface Registers */
+/* Not used as GPAUD interface is not enabled in hw */
+#define HDMI_GP_CONF0                           0x3500
+#define HDMI_GP_CONF1                           0x3501
+#define HDMI_GP_CONF2                           0x3502
+#define HDMI_GP_STAT                            0x3503
+#define HDMI_GP_INT                             0x3504
+#define HDMI_GP_MASK                            0x3505
+#define HDMI_GP_POL                             0x3506
+
+/* Audio DMA Registers */
+#define HDMI_AHB_DMA_CONF0                      0x3600
+#define HDMI_AHB_DMA_START                      0x3601
+#define HDMI_AHB_DMA_STOP                       0x3602
+#define HDMI_AHB_DMA_THRSLD                     0x3603
+#define HDMI_AHB_DMA_STRADDR0                   0x3604
+#define HDMI_AHB_DMA_STRADDR1                   0x3605
+#define HDMI_AHB_DMA_STRADDR2                   0x3606
+#define HDMI_AHB_DMA_STRADDR3                   0x3607
+#define HDMI_AHB_DMA_STPADDR0                   0x3608
+#define HDMI_AHB_DMA_STPADDR1                   0x3609
+#define HDMI_AHB_DMA_STPADDR2                   0x360a
+#define HDMI_AHB_DMA_STPADDR3                   0x360b
+#define HDMI_AHB_DMA_BSTADDR0                   0x360c
+#define HDMI_AHB_DMA_BSTADDR1                   0x360d
+#define HDMI_AHB_DMA_BSTADDR2                   0x360e
+#define HDMI_AHB_DMA_BSTADDR3                   0x360f
+#define HDMI_AHB_DMA_MBLENGTH0                  0x3610
+#define HDMI_AHB_DMA_MBLENGTH1                  0x3611
+#define HDMI_AHB_DMA_STAT                       0x3612
+#define HDMI_AHB_DMA_INT                        0x3613
+#define HDMI_AHB_DMA_MASK                       0x3614
+#define HDMI_AHB_DMA_POL                        0x3615
+#define HDMI_AHB_DMA_CONF1                      0x3616
+#define HDMI_AHB_DMA_BUFFSTAT                   0x3617
+#define HDMI_AHB_DMA_BUFFINT                    0x3618
+#define HDMI_AHB_DMA_BUFFMASK                   0x3619
+#define HDMI_AHB_DMA_BUFFPOL                    0x361a
+
+/* Main Controller Registers */
+#define HDMI_MC_SFRDIV                          0x4000
+#define HDMI_MC_CLKDIS                          0x4001
+#define HDMI_MC_SWRSTZ                          0x4002
+#define HDMI_MC_OPCTRL                          0x4003
+#define HDMI_MC_FLOWCTRL                        0x4004
+#define HDMI_MC_PHYRSTZ                         0x4005
+#define HDMI_MC_LOCKONCLOCK                     0x4006
+#define HDMI_MC_HEACPHY_RST                     0x4007
+
+/* Color Space  Converter Registers */
+#define HDMI_CSC_CFG                            0x4100
+#define HDMI_CSC_SCALE                          0x4101
+#define HDMI_CSC_COEF_A1_MSB                    0x4102
+#define HDMI_CSC_COEF_A1_LSB                    0x4103
+#define HDMI_CSC_COEF_A2_MSB                    0x4104
+#define HDMI_CSC_COEF_A2_LSB                    0x4105
+#define HDMI_CSC_COEF_A3_MSB                    0x4106
+#define HDMI_CSC_COEF_A3_LSB                    0x4107
+#define HDMI_CSC_COEF_A4_MSB                    0x4108
+#define HDMI_CSC_COEF_A4_LSB                    0x4109
+#define HDMI_CSC_COEF_B1_MSB                    0x410A
+#define HDMI_CSC_COEF_B1_LSB                    0x410B
+#define HDMI_CSC_COEF_B2_MSB                    0x410C
+#define HDMI_CSC_COEF_B2_LSB                    0x410D
+#define HDMI_CSC_COEF_B3_MSB                    0x410E
+#define HDMI_CSC_COEF_B3_LSB                    0x410F
+#define HDMI_CSC_COEF_B4_MSB                    0x4110
+#define HDMI_CSC_COEF_B4_LSB                    0x4111
+#define HDMI_CSC_COEF_C1_MSB                    0x4112
+#define HDMI_CSC_COEF_C1_LSB                    0x4113
+#define HDMI_CSC_COEF_C2_MSB                    0x4114
+#define HDMI_CSC_COEF_C2_LSB                    0x4115
+#define HDMI_CSC_COEF_C3_MSB                    0x4116
+#define HDMI_CSC_COEF_C3_LSB                    0x4117
+#define HDMI_CSC_COEF_C4_MSB                    0x4118
+#define HDMI_CSC_COEF_C4_LSB                    0x4119
+
+/* HDCP Encryption Engine Registers */
+#define HDMI_A_HDCPCFG0                         0x5000
+#define HDMI_A_HDCPCFG1                         0x5001
+#define HDMI_A_HDCPOBS0                         0x5002
+#define HDMI_A_HDCPOBS1                         0x5003
+#define HDMI_A_HDCPOBS2                         0x5004
+#define HDMI_A_HDCPOBS3                         0x5005
+#define HDMI_A_APIINTCLR                        0x5006
+#define HDMI_A_APIINTSTAT                       0x5007
+#define HDMI_A_APIINTMSK                        0x5008
+#define HDMI_A_VIDPOLCFG                        0x5009
+#define HDMI_A_OESSWCFG                         0x500A
+#define HDMI_A_TIMER1SETUP0                     0x500B
+#define HDMI_A_TIMER1SETUP1                     0x500C
+#define HDMI_A_TIMER2SETUP0                     0x500D
+#define HDMI_A_TIMER2SETUP1                     0x500E
+#define HDMI_A_100MSCFG                         0x500F
+#define HDMI_A_2SCFG0                           0x5010
+#define HDMI_A_2SCFG1                           0x5011
+#define HDMI_A_5SCFG0                           0x5012
+#define HDMI_A_5SCFG1                           0x5013
+#define HDMI_A_SRMVERLSB                        0x5014
+#define HDMI_A_SRMVERMSB                        0x5015
+#define HDMI_A_SRMCTRL                          0x5016
+#define HDMI_A_SFRSETUP                         0x5017
+#define HDMI_A_I2CHSETUP                        0x5018
+#define HDMI_A_INTSETUP                         0x5019
+#define HDMI_A_PRESETUP                         0x501A
+#define HDMI_A_SRM_BASE                         0x5020
+
+/* CEC Engine Registers */
+#define HDMI_CEC_CTRL                           0x7D00
+#define HDMI_CEC_STAT                           0x7D01
+#define HDMI_CEC_MASK                           0x7D02
+#define HDMI_CEC_POLARITY                       0x7D03
+#define HDMI_CEC_INT                            0x7D04
+#define HDMI_CEC_ADDR_L                         0x7D05
+#define HDMI_CEC_ADDR_H                         0x7D06
+#define HDMI_CEC_TX_CNT                         0x7D07
+#define HDMI_CEC_RX_CNT                         0x7D08
+#define HDMI_CEC_TX_DATA0                       0x7D10
+#define HDMI_CEC_TX_DATA1                       0x7D11
+#define HDMI_CEC_TX_DATA2                       0x7D12
+#define HDMI_CEC_TX_DATA3                       0x7D13
+#define HDMI_CEC_TX_DATA4                       0x7D14
+#define HDMI_CEC_TX_DATA5                       0x7D15
+#define HDMI_CEC_TX_DATA6                       0x7D16
+#define HDMI_CEC_TX_DATA7                       0x7D17
+#define HDMI_CEC_TX_DATA8                       0x7D18
+#define HDMI_CEC_TX_DATA9                       0x7D19
+#define HDMI_CEC_TX_DATA10                      0x7D1a
+#define HDMI_CEC_TX_DATA11                      0x7D1b
+#define HDMI_CEC_TX_DATA12                      0x7D1c
+#define HDMI_CEC_TX_DATA13                      0x7D1d
+#define HDMI_CEC_TX_DATA14                      0x7D1e
+#define HDMI_CEC_TX_DATA15                      0x7D1f
+#define HDMI_CEC_RX_DATA0                       0x7D20
+#define HDMI_CEC_RX_DATA1                       0x7D21
+#define HDMI_CEC_RX_DATA2                       0x7D22
+#define HDMI_CEC_RX_DATA3                       0x7D23
+#define HDMI_CEC_RX_DATA4                       0x7D24
+#define HDMI_CEC_RX_DATA5                       0x7D25
+#define HDMI_CEC_RX_DATA6                       0x7D26
+#define HDMI_CEC_RX_DATA7                       0x7D27
+#define HDMI_CEC_RX_DATA8                       0x7D28
+#define HDMI_CEC_RX_DATA9                       0x7D29
+#define HDMI_CEC_RX_DATA10                      0x7D2a
+#define HDMI_CEC_RX_DATA11                      0x7D2b
+#define HDMI_CEC_RX_DATA12                      0x7D2c
+#define HDMI_CEC_RX_DATA13                      0x7D2d
+#define HDMI_CEC_RX_DATA14                      0x7D2e
+#define HDMI_CEC_RX_DATA15                      0x7D2f
+#define HDMI_CEC_LOCK                           0x7D30
+#define HDMI_CEC_WKUPCTRL                       0x7D31
+
+/* I2C Master Registers (E-DDC) */
+#define HDMI_I2CM_SLAVE                         0x7E00
+#define HDMI_I2CMESS                            0x7E01
+#define HDMI_I2CM_DATAO                         0x7E02
+#define HDMI_I2CM_DATAI                         0x7E03
+#define HDMI_I2CM_OPERATION                     0x7E04
+#define HDMI_I2CM_INT                           0x7E05
+#define HDMI_I2CM_CTLINT                        0x7E06
+#define HDMI_I2CM_DIV                           0x7E07
+#define HDMI_I2CM_SEGADDR                       0x7E08
+#define HDMI_I2CM_SOFTRSTZ                      0x7E09
+#define HDMI_I2CM_SEGPTR                        0x7E0A
+#define HDMI_I2CM_SS_SCL_HCNT_1_ADDR            0x7E0B
+#define HDMI_I2CM_SS_SCL_HCNT_0_ADDR            0x7E0C
+#define HDMI_I2CM_SS_SCL_LCNT_1_ADDR            0x7E0D
+#define HDMI_I2CM_SS_SCL_LCNT_0_ADDR            0x7E0E
+#define HDMI_I2CM_FS_SCL_HCNT_1_ADDR            0x7E0F
+#define HDMI_I2CM_FS_SCL_HCNT_0_ADDR            0x7E10
+#define HDMI_I2CM_FS_SCL_LCNT_1_ADDR            0x7E11
+#define HDMI_I2CM_FS_SCL_LCNT_0_ADDR            0x7E12
+
+/* Random Number Generator Registers (RNG) */
+#define HDMI_RNG_BASE                           0x8000
+
+
+/*
+ * Register field definitions
+ */
+enum {
+/* IH_FC_INT2 field values */
+	HDMI_IH_FC_INT2_OVERFLOW_MASK = 0x03,
+	HDMI_IH_FC_INT2_LOW_PRIORITY_OVERFLOW = 0x02,
+	HDMI_IH_FC_INT2_HIGH_PRIORITY_OVERFLOW = 0x01,
+
+/* IH_FC_STAT2 field values */
+	HDMI_IH_FC_STAT2_OVERFLOW_MASK = 0x03,
+	HDMI_IH_FC_STAT2_LOW_PRIORITY_OVERFLOW = 0x02,
+	HDMI_IH_FC_STAT2_HIGH_PRIORITY_OVERFLOW = 0x01,
+
+/* IH_PHY_STAT0 field values */
+	HDMI_IH_PHY_STAT0_RX_SENSE3 = 0x20,
+	HDMI_IH_PHY_STAT0_RX_SENSE2 = 0x10,
+	HDMI_IH_PHY_STAT0_RX_SENSE1 = 0x8,
+	HDMI_IH_PHY_STAT0_RX_SENSE0 = 0x4,
+	HDMI_IH_PHY_STAT0_TX_PHY_LOCK = 0x2,
+	HDMI_IH_PHY_STAT0_HPD = 0x1,
+
+/* IH_MUTE_I2CMPHY_STAT0 field values */
+	HDMI_IH_MUTE_I2CMPHY_STAT0_I2CMPHYDONE = 0x2,
+	HDMI_IH_MUTE_I2CMPHY_STAT0_I2CMPHYERROR = 0x1,
+
+/* IH_AHBDMAAUD_STAT0 field values */
+	HDMI_IH_AHBDMAAUD_STAT0_ERROR = 0x20,
+	HDMI_IH_AHBDMAAUD_STAT0_LOST = 0x10,
+	HDMI_IH_AHBDMAAUD_STAT0_RETRY = 0x08,
+	HDMI_IH_AHBDMAAUD_STAT0_DONE = 0x04,
+	HDMI_IH_AHBDMAAUD_STAT0_BUFFFULL = 0x02,
+	HDMI_IH_AHBDMAAUD_STAT0_BUFFEMPTY = 0x01,
+
+/* IH_MUTE_FC_STAT2 field values */
+	HDMI_IH_MUTE_FC_STAT2_OVERFLOW_MASK = 0x03,
+	HDMI_IH_MUTE_FC_STAT2_LOW_PRIORITY_OVERFLOW = 0x02,
+	HDMI_IH_MUTE_FC_STAT2_HIGH_PRIORITY_OVERFLOW = 0x01,
+
+/* IH_MUTE_AHBDMAAUD_STAT0 field values */
+	HDMI_IH_MUTE_AHBDMAAUD_STAT0_ERROR = 0x20,
+	HDMI_IH_MUTE_AHBDMAAUD_STAT0_LOST = 0x10,
+	HDMI_IH_MUTE_AHBDMAAUD_STAT0_RETRY = 0x08,
+	HDMI_IH_MUTE_AHBDMAAUD_STAT0_DONE = 0x04,
+	HDMI_IH_MUTE_AHBDMAAUD_STAT0_BUFFFULL = 0x02,
+	HDMI_IH_MUTE_AHBDMAAUD_STAT0_BUFFEMPTY = 0x01,
+
+/* IH_MUTE field values */
+	HDMI_IH_MUTE_MUTE_WAKEUP_INTERRUPT = 0x2,
+	HDMI_IH_MUTE_MUTE_ALL_INTERRUPT = 0x1,
+
+/* TX_INVID0 field values */
+	HDMI_TX_INVID0_INTERNAL_DE_GENERATOR_MASK = 0x80,
+	HDMI_TX_INVID0_INTERNAL_DE_GENERATOR_ENABLE = 0x80,
+	HDMI_TX_INVID0_INTERNAL_DE_GENERATOR_DISABLE = 0x00,
+	HDMI_TX_INVID0_VIDEO_MAPPING_MASK = 0x1F,
+	HDMI_TX_INVID0_VIDEO_MAPPING_OFFSET = 0,
+
+/* TX_INSTUFFING field values */
+	HDMI_TX_INSTUFFING_BDBDATA_STUFFING_MASK = 0x4,
+	HDMI_TX_INSTUFFING_BDBDATA_STUFFING_ENABLE = 0x4,
+	HDMI_TX_INSTUFFING_BDBDATA_STUFFING_DISABLE = 0x0,
+	HDMI_TX_INSTUFFING_RCRDATA_STUFFING_MASK = 0x2,
+	HDMI_TX_INSTUFFING_RCRDATA_STUFFING_ENABLE = 0x2,
+	HDMI_TX_INSTUFFING_RCRDATA_STUFFING_DISABLE = 0x0,
+	HDMI_TX_INSTUFFING_GYDATA_STUFFING_MASK = 0x1,
+	HDMI_TX_INSTUFFING_GYDATA_STUFFING_ENABLE = 0x1,
+	HDMI_TX_INSTUFFING_GYDATA_STUFFING_DISABLE = 0x0,
+
+/* VP_PR_CD field values */
+	HDMI_VP_PR_CD_COLOR_DEPTH_MASK = 0xF0,
+	HDMI_VP_PR_CD_COLOR_DEPTH_OFFSET = 4,
+	HDMI_VP_PR_CD_DESIRED_PR_FACTOR_MASK = 0x0F,
+	HDMI_VP_PR_CD_DESIRED_PR_FACTOR_OFFSET = 0,
+
+/* VP_STUFF field values */
+	HDMI_VP_STUFF_IDEFAULT_PHASE_MASK = 0x20,
+	HDMI_VP_STUFF_IDEFAULT_PHASE_OFFSET = 5,
+	HDMI_VP_STUFF_IFIX_PP_TO_LAST_MASK = 0x10,
+	HDMI_VP_STUFF_IFIX_PP_TO_LAST_OFFSET = 4,
+	HDMI_VP_STUFF_ICX_GOTO_P0_ST_MASK = 0x8,
+	HDMI_VP_STUFF_ICX_GOTO_P0_ST_OFFSET = 3,
+	HDMI_VP_STUFF_YCC422_STUFFING_MASK = 0x4,
+	HDMI_VP_STUFF_YCC422_STUFFING_STUFFING_MODE = 0x4,
+	HDMI_VP_STUFF_YCC422_STUFFING_DIRECT_MODE = 0x0,
+	HDMI_VP_STUFF_PP_STUFFING_MASK = 0x2,
+	HDMI_VP_STUFF_PP_STUFFING_STUFFING_MODE = 0x2,
+	HDMI_VP_STUFF_PP_STUFFING_DIRECT_MODE = 0x0,
+	HDMI_VP_STUFF_PR_STUFFING_MASK = 0x1,
+	HDMI_VP_STUFF_PR_STUFFING_STUFFING_MODE = 0x1,
+	HDMI_VP_STUFF_PR_STUFFING_DIRECT_MODE = 0x0,
+
+/* VP_CONF field values */
+	HDMI_VP_CONF_BYPASS_EN_MASK = 0x40,
+	HDMI_VP_CONF_BYPASS_EN_ENABLE = 0x40,
+	HDMI_VP_CONF_BYPASS_EN_DISABLE = 0x00,
+	HDMI_VP_CONF_PP_EN_ENMASK = 0x20,
+	HDMI_VP_CONF_PP_EN_ENABLE = 0x20,
+	HDMI_VP_CONF_PP_EN_DISABLE = 0x00,
+	HDMI_VP_CONF_PR_EN_MASK = 0x10,
+	HDMI_VP_CONF_PR_EN_ENABLE = 0x10,
+	HDMI_VP_CONF_PR_EN_DISABLE = 0x00,
+	HDMI_VP_CONF_YCC422_EN_MASK = 0x8,
+	HDMI_VP_CONF_YCC422_EN_ENABLE = 0x8,
+	HDMI_VP_CONF_YCC422_EN_DISABLE = 0x0,
+	HDMI_VP_CONF_BYPASS_SELECT_MASK = 0x4,
+	HDMI_VP_CONF_BYPASS_SELECT_VID_PACKETIZER = 0x4,
+	HDMI_VP_CONF_BYPASS_SELECT_PIX_REPEATER = 0x0,
+	HDMI_VP_CONF_OUTPUT_SELECTOR_MASK = 0x3,
+	HDMI_VP_CONF_OUTPUT_SELECTOR_BYPASS = 0x3,
+	HDMI_VP_CONF_OUTPUT_SELECTOR_YCC422 = 0x1,
+	HDMI_VP_CONF_OUTPUT_SELECTOR_PP = 0x0,
+
+/* VP_REMAP field values */
+	HDMI_VP_REMAP_MASK = 0x3,
+	HDMI_VP_REMAP_YCC422_24bit = 0x2,
+	HDMI_VP_REMAP_YCC422_20bit = 0x1,
+	HDMI_VP_REMAP_YCC422_16bit = 0x0,
+
+/* FC_INVIDCONF field values */
+	HDMI_FC_INVIDCONF_HDCP_KEEPOUT_MASK = 0x80,
+	HDMI_FC_INVIDCONF_HDCP_KEEPOUT_ACTIVE = 0x80,
+	HDMI_FC_INVIDCONF_HDCP_KEEPOUT_INACTIVE = 0x00,
+	HDMI_FC_INVIDCONF_VSYNC_IN_POLARITY_MASK = 0x40,
+	HDMI_FC_INVIDCONF_VSYNC_IN_POLARITY_ACTIVE_HIGH = 0x40,
+	HDMI_FC_INVIDCONF_VSYNC_IN_POLARITY_ACTIVE_LOW = 0x00,
+	HDMI_FC_INVIDCONF_HSYNC_IN_POLARITY_MASK = 0x20,
+	HDMI_FC_INVIDCONF_HSYNC_IN_POLARITY_ACTIVE_HIGH = 0x20,
+	HDMI_FC_INVIDCONF_HSYNC_IN_POLARITY_ACTIVE_LOW = 0x00,
+	HDMI_FC_INVIDCONF_DE_IN_POLARITY_MASK = 0x10,
+	HDMI_FC_INVIDCONF_DE_IN_POLARITY_ACTIVE_HIGH = 0x10,
+	HDMI_FC_INVIDCONF_DE_IN_POLARITY_ACTIVE_LOW = 0x00,
+	HDMI_FC_INVIDCONF_DVI_MODEZ_MASK = 0x8,
+	HDMI_FC_INVIDCONF_DVI_MODEZ_HDMI_MODE = 0x8,
+	HDMI_FC_INVIDCONF_DVI_MODEZ_DVI_MODE = 0x0,
+	HDMI_FC_INVIDCONF_R_V_BLANK_IN_OSC_MASK = 0x2,
+	HDMI_FC_INVIDCONF_R_V_BLANK_IN_OSC_ACTIVE_HIGH = 0x2,
+	HDMI_FC_INVIDCONF_R_V_BLANK_IN_OSC_ACTIVE_LOW = 0x0,
+	HDMI_FC_INVIDCONF_IN_I_P_MASK = 0x1,
+	HDMI_FC_INVIDCONF_IN_I_P_INTERLACED = 0x1,
+	HDMI_FC_INVIDCONF_IN_I_P_PROGRESSIVE = 0x0,
+
+/* FC_AUDICONF0 field values */
+	HDMI_FC_AUDICONF0_CC_OFFSET = 4,
+	HDMI_FC_AUDICONF0_CC_MASK = 0x70,
+	HDMI_FC_AUDICONF0_CT_OFFSET = 0,
+	HDMI_FC_AUDICONF0_CT_MASK = 0xF,
+
+/* FC_AUDICONF1 field values */
+	HDMI_FC_AUDICONF1_SS_OFFSET = 3,
+	HDMI_FC_AUDICONF1_SS_MASK = 0x18,
+	HDMI_FC_AUDICONF1_SF_OFFSET = 0,
+	HDMI_FC_AUDICONF1_SF_MASK = 0x7,
+
+/* FC_AUDICONF3 field values */
+	HDMI_FC_AUDICONF3_LFEPBL_OFFSET = 5,
+	HDMI_FC_AUDICONF3_LFEPBL_MASK = 0x60,
+	HDMI_FC_AUDICONF3_DM_INH_OFFSET = 4,
+	HDMI_FC_AUDICONF3_DM_INH_MASK = 0x10,
+	HDMI_FC_AUDICONF3_LSV_OFFSET = 0,
+	HDMI_FC_AUDICONF3_LSV_MASK = 0xF,
+
+/* FC_AUDSCHNLS0 field values */
+	HDMI_FC_AUDSCHNLS0_CGMSA_OFFSET = 4,
+	HDMI_FC_AUDSCHNLS0_CGMSA_MASK = 0x30,
+	HDMI_FC_AUDSCHNLS0_COPYRIGHT_OFFSET = 0,
+	HDMI_FC_AUDSCHNLS0_COPYRIGHT_MASK = 0x01,
+
+/* FC_AUDSCHNLS3-6 field values */
+	HDMI_FC_AUDSCHNLS3_OIEC_CH0_OFFSET = 0,
+	HDMI_FC_AUDSCHNLS3_OIEC_CH0_MASK = 0x0f,
+	HDMI_FC_AUDSCHNLS3_OIEC_CH1_OFFSET = 4,
+	HDMI_FC_AUDSCHNLS3_OIEC_CH1_MASK = 0xf0,
+	HDMI_FC_AUDSCHNLS4_OIEC_CH2_OFFSET = 0,
+	HDMI_FC_AUDSCHNLS4_OIEC_CH2_MASK = 0x0f,
+	HDMI_FC_AUDSCHNLS4_OIEC_CH3_OFFSET = 4,
+	HDMI_FC_AUDSCHNLS4_OIEC_CH3_MASK = 0xf0,
+
+	HDMI_FC_AUDSCHNLS5_OIEC_CH0_OFFSET = 0,
+	HDMI_FC_AUDSCHNLS5_OIEC_CH0_MASK = 0x0f,
+	HDMI_FC_AUDSCHNLS5_OIEC_CH1_OFFSET = 4,
+	HDMI_FC_AUDSCHNLS5_OIEC_CH1_MASK = 0xf0,
+	HDMI_FC_AUDSCHNLS6_OIEC_CH2_OFFSET = 0,
+	HDMI_FC_AUDSCHNLS6_OIEC_CH2_MASK = 0x0f,
+	HDMI_FC_AUDSCHNLS6_OIEC_CH3_OFFSET = 4,
+	HDMI_FC_AUDSCHNLS6_OIEC_CH3_MASK = 0xf0,
+
+/* HDMI_FC_AUDSCHNLS7 field values */
+	HDMI_FC_AUDSCHNLS7_ACCURACY_OFFSET = 4,
+	HDMI_FC_AUDSCHNLS7_ACCURACY_MASK = 0x30,
+
+/* HDMI_FC_AUDSCHNLS8 field values */
+	HDMI_FC_AUDSCHNLS8_ORIGSAMPFREQ_MASK = 0xf0,
+	HDMI_FC_AUDSCHNLS8_ORIGSAMPFREQ_OFFSET = 4,
+	HDMI_FC_AUDSCHNLS8_WORDLEGNTH_MASK = 0x0f,
+	HDMI_FC_AUDSCHNLS8_WORDLEGNTH_OFFSET = 0,
+
+/* FC_AUDSCONF field values */
+	HDMI_FC_AUDSCONF_AUD_PACKET_SAMPFIT_MASK = 0xF0,
+	HDMI_FC_AUDSCONF_AUD_PACKET_SAMPFIT_OFFSET = 4,
+	HDMI_FC_AUDSCONF_AUD_PACKET_LAYOUT_MASK = 0x1,
+	HDMI_FC_AUDSCONF_AUD_PACKET_LAYOUT_OFFSET = 0,
+	HDMI_FC_AUDSCONF_AUD_PACKET_LAYOUT_LAYOUT1 = 0x1,
+	HDMI_FC_AUDSCONF_AUD_PACKET_LAYOUT_LAYOUT0 = 0x0,
+
+/* FC_STAT2 field values */
+	HDMI_FC_STAT2_OVERFLOW_MASK = 0x03,
+	HDMI_FC_STAT2_LOW_PRIORITY_OVERFLOW = 0x02,
+	HDMI_FC_STAT2_HIGH_PRIORITY_OVERFLOW = 0x01,
+
+/* FC_INT2 field values */
+	HDMI_FC_INT2_OVERFLOW_MASK = 0x03,
+	HDMI_FC_INT2_LOW_PRIORITY_OVERFLOW = 0x02,
+	HDMI_FC_INT2_HIGH_PRIORITY_OVERFLOW = 0x01,
+
+/* FC_MASK2 field values */
+	HDMI_FC_MASK2_OVERFLOW_MASK = 0x03,
+	HDMI_FC_MASK2_LOW_PRIORITY_OVERFLOW = 0x02,
+	HDMI_FC_MASK2_HIGH_PRIORITY_OVERFLOW = 0x01,
+
+/* FC_PRCONF field values */
+	HDMI_FC_PRCONF_INCOMING_PR_FACTOR_MASK = 0xF0,
+	HDMI_FC_PRCONF_INCOMING_PR_FACTOR_OFFSET = 4,
+	HDMI_FC_PRCONF_OUTPUT_PR_FACTOR_MASK = 0x0F,
+	HDMI_FC_PRCONF_OUTPUT_PR_FACTOR_OFFSET = 0,
+
+/* FC_AVICONF0-FC_AVICONF3 field values */
+	HDMI_FC_AVICONF0_PIX_FMT_MASK = 0x03,
+	HDMI_FC_AVICONF0_PIX_FMT_RGB = 0x00,
+	HDMI_FC_AVICONF0_PIX_FMT_YCBCR422 = 0x01,
+	HDMI_FC_AVICONF0_PIX_FMT_YCBCR444 = 0x02,
+	HDMI_FC_AVICONF0_ACTIVE_FMT_MASK = 0x40,
+	HDMI_FC_AVICONF0_ACTIVE_FMT_INFO_PRESENT = 0x40,
+	HDMI_FC_AVICONF0_ACTIVE_FMT_NO_INFO = 0x00,
+	HDMI_FC_AVICONF0_BAR_DATA_MASK = 0x0C,
+	HDMI_FC_AVICONF0_BAR_DATA_NO_DATA = 0x00,
+	HDMI_FC_AVICONF0_BAR_DATA_VERT_BAR = 0x04,
+	HDMI_FC_AVICONF0_BAR_DATA_HORIZ_BAR = 0x08,
+	HDMI_FC_AVICONF0_BAR_DATA_VERT_HORIZ_BAR = 0x0C,
+	HDMI_FC_AVICONF0_SCAN_INFO_MASK = 0x30,
+	HDMI_FC_AVICONF0_SCAN_INFO_OVERSCAN = 0x10,
+	HDMI_FC_AVICONF0_SCAN_INFO_UNDERSCAN = 0x20,
+	HDMI_FC_AVICONF0_SCAN_INFO_NODATA = 0x00,
+
+	HDMI_FC_AVICONF1_ACTIVE_ASPECT_RATIO_MASK = 0x0F,
+	HDMI_FC_AVICONF1_ACTIVE_ASPECT_RATIO_USE_CODED = 0x08,
+	HDMI_FC_AVICONF1_ACTIVE_ASPECT_RATIO_4_3 = 0x09,
+	HDMI_FC_AVICONF1_ACTIVE_ASPECT_RATIO_16_9 = 0x0A,
+	HDMI_FC_AVICONF1_ACTIVE_ASPECT_RATIO_14_9 = 0x0B,
+	HDMI_FC_AVICONF1_CODED_ASPECT_RATIO_MASK = 0x30,
+	HDMI_FC_AVICONF1_CODED_ASPECT_RATIO_NO_DATA = 0x00,
+	HDMI_FC_AVICONF1_CODED_ASPECT_RATIO_4_3 = 0x10,
+	HDMI_FC_AVICONF1_CODED_ASPECT_RATIO_16_9 = 0x20,
+	HDMI_FC_AVICONF1_COLORIMETRY_MASK = 0xC0,
+	HDMI_FC_AVICONF1_COLORIMETRY_NO_DATA = 0x00,
+	HDMI_FC_AVICONF1_COLORIMETRY_SMPTE = 0x40,
+	HDMI_FC_AVICONF1_COLORIMETRY_ITUR = 0x80,
+	HDMI_FC_AVICONF1_COLORIMETRY_EXTENDED_INFO = 0xC0,
+
+	HDMI_FC_AVICONF2_SCALING_MASK = 0x03,
+	HDMI_FC_AVICONF2_SCALING_NONE = 0x00,
+	HDMI_FC_AVICONF2_SCALING_HORIZ = 0x01,
+	HDMI_FC_AVICONF2_SCALING_VERT = 0x02,
+	HDMI_FC_AVICONF2_SCALING_HORIZ_VERT = 0x03,
+	HDMI_FC_AVICONF2_RGB_QUANT_MASK = 0x0C,
+	HDMI_FC_AVICONF2_RGB_QUANT_DEFAULT = 0x00,
+	HDMI_FC_AVICONF2_RGB_QUANT_LIMITED_RANGE = 0x04,
+	HDMI_FC_AVICONF2_RGB_QUANT_FULL_RANGE = 0x08,
+	HDMI_FC_AVICONF2_EXT_COLORIMETRY_MASK = 0x70,
+	HDMI_FC_AVICONF2_EXT_COLORIMETRY_XVYCC601 = 0x00,
+	HDMI_FC_AVICONF2_EXT_COLORIMETRY_XVYCC709 = 0x10,
+	HDMI_FC_AVICONF2_EXT_COLORIMETRY_SYCC601 = 0x20,
+	HDMI_FC_AVICONF2_EXT_COLORIMETRY_ADOBE_YCC601 = 0x30,
+	HDMI_FC_AVICONF2_EXT_COLORIMETRY_ADOBE_RGB = 0x40,
+	HDMI_FC_AVICONF2_IT_CONTENT_MASK = 0x80,
+	HDMI_FC_AVICONF2_IT_CONTENT_NO_DATA = 0x00,
+	HDMI_FC_AVICONF2_IT_CONTENT_VALID = 0x80,
+
+	HDMI_FC_AVICONF3_IT_CONTENT_TYPE_MASK = 0x03,
+	HDMI_FC_AVICONF3_IT_CONTENT_TYPE_GRAPHICS = 0x00,
+	HDMI_FC_AVICONF3_IT_CONTENT_TYPE_PHOTO = 0x01,
+	HDMI_FC_AVICONF3_IT_CONTENT_TYPE_CINEMA = 0x02,
+	HDMI_FC_AVICONF3_IT_CONTENT_TYPE_GAME = 0x03,
+	HDMI_FC_AVICONF3_QUANT_RANGE_MASK = 0x0C,
+	HDMI_FC_AVICONF3_QUANT_RANGE_LIMITED = 0x00,
+	HDMI_FC_AVICONF3_QUANT_RANGE_FULL = 0x04,
+
+/* FC_DBGFORCE field values */
+	HDMI_FC_DBGFORCE_FORCEAUDIO = 0x10,
+	HDMI_FC_DBGFORCE_FORCEVIDEO = 0x1,
+
+/* PHY_CONF0 field values */
+	HDMI_PHY_CONF0_PDZ_MASK = 0x80,
+	HDMI_PHY_CONF0_PDZ_OFFSET = 7,
+	HDMI_PHY_CONF0_ENTMDS_MASK = 0x40,
+	HDMI_PHY_CONF0_ENTMDS_OFFSET = 6,
+	HDMI_PHY_CONF0_SPARECTRL = 0x20,
+	HDMI_PHY_CONF0_GEN2_PDDQ_MASK = 0x10,
+	HDMI_PHY_CONF0_GEN2_PDDQ_OFFSET = 4,
+	HDMI_PHY_CONF0_GEN2_TXPWRON_MASK = 0x8,
+	HDMI_PHY_CONF0_GEN2_TXPWRON_OFFSET = 3,
+	HDMI_PHY_CONF0_GEN2_ENHPDRXSENSE_MASK = 0x4,
+	HDMI_PHY_CONF0_GEN2_ENHPDRXSENSE_OFFSET = 2,
+	HDMI_PHY_CONF0_SELDATAENPOL_MASK = 0x2,
+	HDMI_PHY_CONF0_SELDATAENPOL_OFFSET = 1,
+	HDMI_PHY_CONF0_SELDIPIF_MASK = 0x1,
+	HDMI_PHY_CONF0_SELDIPIF_OFFSET = 0,
+
+/* PHY_TST0 field values */
+	HDMI_PHY_TST0_TSTCLR_MASK = 0x20,
+	HDMI_PHY_TST0_TSTCLR_OFFSET = 5,
+	HDMI_PHY_TST0_TSTEN_MASK = 0x10,
+	HDMI_PHY_TST0_TSTEN_OFFSET = 4,
+	HDMI_PHY_TST0_TSTCLK_MASK = 0x1,
+	HDMI_PHY_TST0_TSTCLK_OFFSET = 0,
+
+/* PHY_STAT0 field values */
+	HDMI_PHY_RX_SENSE3 = 0x80,
+	HDMI_PHY_RX_SENSE2 = 0x40,
+	HDMI_PHY_RX_SENSE1 = 0x20,
+	HDMI_PHY_RX_SENSE0 = 0x10,
+	HDMI_PHY_HPD = 0x02,
+	HDMI_PHY_TX_PHY_LOCK = 0x01,
+
+/* PHY_I2CM_SLAVE_ADDR field values */
+	HDMI_PHY_I2CM_SLAVE_ADDR_PHY_GEN2 = 0x69,
+	HDMI_PHY_I2CM_SLAVE_ADDR_HEAC_PHY = 0x49,
+
+/* PHY_I2CM_OPERATION_ADDR field values */
+	HDMI_PHY_I2CM_OPERATION_ADDR_WRITE = 0x10,
+	HDMI_PHY_I2CM_OPERATION_ADDR_READ = 0x1,
+
+/* HDMI_PHY_I2CM_INT_ADDR */
+	HDMI_PHY_I2CM_INT_ADDR_DONE_POL = 0x08,
+	HDMI_PHY_I2CM_INT_ADDR_DONE_MASK = 0x04,
+
+/* HDMI_PHY_I2CM_CTLINT_ADDR */
+	HDMI_PHY_I2CM_CTLINT_ADDR_NAC_POL = 0x80,
+	HDMI_PHY_I2CM_CTLINT_ADDR_NAC_MASK = 0x40,
+	HDMI_PHY_I2CM_CTLINT_ADDR_ARBITRATION_POL = 0x08,
+	HDMI_PHY_I2CM_CTLINT_ADDR_ARBITRATION_MASK = 0x04,
+
+/* AUD_CTS3 field values */
+	HDMI_AUD_CTS3_N_SHIFT_OFFSET = 5,
+	HDMI_AUD_CTS3_N_SHIFT_MASK = 0xe0,
+	HDMI_AUD_CTS3_N_SHIFT_1 = 0,
+	HDMI_AUD_CTS3_N_SHIFT_16 = 0x20,
+	HDMI_AUD_CTS3_N_SHIFT_32 = 0x40,
+	HDMI_AUD_CTS3_N_SHIFT_64 = 0x60,
+	HDMI_AUD_CTS3_N_SHIFT_128 = 0x80,
+	HDMI_AUD_CTS3_N_SHIFT_256 = 0xa0,
+	/* note that the CTS3 MANUAL bit has been removed
+	   from our part. Can't set it, will read as 0. */
+	HDMI_AUD_CTS3_CTS_MANUAL = 0x10,
+	HDMI_AUD_CTS3_AUDCTS19_16_MASK = 0x0f,
+
+/* AHB_DMA_CONF0 field values */
+	HDMI_AHB_DMA_CONF0_SW_FIFO_RST_OFFSET = 7,
+	HDMI_AHB_DMA_CONF0_SW_FIFO_RST_MASK = 0x80,
+	HDMI_AHB_DMA_CONF0_HBR = 0x10,
+	HDMI_AHB_DMA_CONF0_EN_HLOCK_OFFSET = 3,
+	HDMI_AHB_DMA_CONF0_EN_HLOCK_MASK = 0x08,
+	HDMI_AHB_DMA_CONF0_INCR_TYPE_OFFSET = 1,
+	HDMI_AHB_DMA_CONF0_INCR_TYPE_MASK = 0x06,
+	HDMI_AHB_DMA_CONF0_INCR4 = 0x0,
+	HDMI_AHB_DMA_CONF0_INCR8 = 0x2,
+	HDMI_AHB_DMA_CONF0_INCR16 = 0x4,
+	HDMI_AHB_DMA_CONF0_BURST_MODE = 0x1,
+
+/* HDMI_AHB_DMA_START field values */
+	HDMI_AHB_DMA_START_START_OFFSET = 0,
+	HDMI_AHB_DMA_START_START_MASK = 0x01,
+
+/* HDMI_AHB_DMA_STOP field values */
+	HDMI_AHB_DMA_STOP_STOP_OFFSET = 0,
+	HDMI_AHB_DMA_STOP_STOP_MASK = 0x01,
+
+/* AHB_DMA_STAT, AHB_DMA_INT, AHB_DMA_MASK, AHB_DMA_POL field values */
+	HDMI_AHB_DMA_DONE = 0x80,
+	HDMI_AHB_DMA_RETRY_SPLIT = 0x40,
+	HDMI_AHB_DMA_LOSTOWNERSHIP = 0x20,
+	HDMI_AHB_DMA_ERROR = 0x10,
+	HDMI_AHB_DMA_FIFO_THREMPTY = 0x04,
+	HDMI_AHB_DMA_FIFO_FULL = 0x02,
+	HDMI_AHB_DMA_FIFO_EMPTY = 0x01,
+
+/* AHB_DMA_BUFFSTAT, AHB_DMA_BUFFINT, AHB_DMA_BUFFMASK, AHB_DMA_BUFFPOL field values */
+	HDMI_AHB_DMA_BUFFSTAT_FULL = 0x02,
+	HDMI_AHB_DMA_BUFFSTAT_EMPTY = 0x01,
+
+/* MC_CLKDIS field values */
+	HDMI_MC_CLKDIS_HDCPCLK_DISABLE = 0x40,
+	HDMI_MC_CLKDIS_CECCLK_DISABLE = 0x20,
+	HDMI_MC_CLKDIS_CSCCLK_DISABLE = 0x10,
+	HDMI_MC_CLKDIS_AUDCLK_DISABLE = 0x8,
+	HDMI_MC_CLKDIS_PREPCLK_DISABLE = 0x4,
+	HDMI_MC_CLKDIS_TMDSCLK_DISABLE = 0x2,
+	HDMI_MC_CLKDIS_PIXELCLK_DISABLE = 0x1,
+
+/* MC_SWRSTZ field values */
+	HDMI_MC_SWRSTZ_TMDSSWRST_REQ = 0x02,
+
+/* MC_FLOWCTRL field values */
+	HDMI_MC_FLOWCTRL_FEED_THROUGH_OFF_MASK = 0x1,
+	HDMI_MC_FLOWCTRL_FEED_THROUGH_OFF_CSC_IN_PATH = 0x1,
+	HDMI_MC_FLOWCTRL_FEED_THROUGH_OFF_CSC_BYPASS = 0x0,
+
+/* MC_PHYRSTZ field values */
+	HDMI_MC_PHYRSTZ_ASSERT = 0x0,
+	HDMI_MC_PHYRSTZ_DEASSERT = 0x1,
+
+/* MC_HEACPHY_RST field values */
+	HDMI_MC_HEACPHY_RST_ASSERT = 0x1,
+	HDMI_MC_HEACPHY_RST_DEASSERT = 0x0,
+
+/* CSC_CFG field values */
+	HDMI_CSC_CFG_INTMODE_MASK = 0x30,
+	HDMI_CSC_CFG_INTMODE_OFFSET = 4,
+	HDMI_CSC_CFG_INTMODE_DISABLE = 0x00,
+	HDMI_CSC_CFG_INTMODE_CHROMA_INT_FORMULA1 = 0x10,
+	HDMI_CSC_CFG_INTMODE_CHROMA_INT_FORMULA2 = 0x20,
+	HDMI_CSC_CFG_DECMODE_MASK = 0x3,
+	HDMI_CSC_CFG_DECMODE_OFFSET = 0,
+	HDMI_CSC_CFG_DECMODE_DISABLE = 0x0,
+	HDMI_CSC_CFG_DECMODE_CHROMA_INT_FORMULA1 = 0x1,
+	HDMI_CSC_CFG_DECMODE_CHROMA_INT_FORMULA2 = 0x2,
+	HDMI_CSC_CFG_DECMODE_CHROMA_INT_FORMULA3 = 0x3,
+
+/* CSC_SCALE field values */
+	HDMI_CSC_SCALE_CSC_COLORDE_PTH_MASK = 0xF0,
+	HDMI_CSC_SCALE_CSC_COLORDE_PTH_24BPP = 0x00,
+	HDMI_CSC_SCALE_CSC_COLORDE_PTH_30BPP = 0x50,
+	HDMI_CSC_SCALE_CSC_COLORDE_PTH_36BPP = 0x60,
+	HDMI_CSC_SCALE_CSC_COLORDE_PTH_48BPP = 0x70,
+	HDMI_CSC_SCALE_CSCSCALE_MASK = 0x03,
+
+/* A_HDCPCFG0 field values */
+	HDMI_A_HDCPCFG0_ELVENA_MASK = 0x80,
+	HDMI_A_HDCPCFG0_ELVENA_ENABLE = 0x80,
+	HDMI_A_HDCPCFG0_ELVENA_DISABLE = 0x00,
+	HDMI_A_HDCPCFG0_I2CFASTMODE_MASK = 0x40,
+	HDMI_A_HDCPCFG0_I2CFASTMODE_ENABLE = 0x40,
+	HDMI_A_HDCPCFG0_I2CFASTMODE_DISABLE = 0x00,
+	HDMI_A_HDCPCFG0_BYPENCRYPTION_MASK = 0x20,
+	HDMI_A_HDCPCFG0_BYPENCRYPTION_ENABLE = 0x20,
+	HDMI_A_HDCPCFG0_BYPENCRYPTION_DISABLE = 0x00,
+	HDMI_A_HDCPCFG0_SYNCRICHECK_MASK = 0x10,
+	HDMI_A_HDCPCFG0_SYNCRICHECK_ENABLE = 0x10,
+	HDMI_A_HDCPCFG0_SYNCRICHECK_DISABLE = 0x00,
+	HDMI_A_HDCPCFG0_AVMUTE_MASK = 0x8,
+	HDMI_A_HDCPCFG0_AVMUTE_ENABLE = 0x8,
+	HDMI_A_HDCPCFG0_AVMUTE_DISABLE = 0x0,
+	HDMI_A_HDCPCFG0_RXDETECT_MASK = 0x4,
+	HDMI_A_HDCPCFG0_RXDETECT_ENABLE = 0x4,
+	HDMI_A_HDCPCFG0_RXDETECT_DISABLE = 0x0,
+	HDMI_A_HDCPCFG0_EN11FEATURE_MASK = 0x2,
+	HDMI_A_HDCPCFG0_EN11FEATURE_ENABLE = 0x2,
+	HDMI_A_HDCPCFG0_EN11FEATURE_DISABLE = 0x0,
+	HDMI_A_HDCPCFG0_HDMIDVI_MASK = 0x1,
+	HDMI_A_HDCPCFG0_HDMIDVI_HDMI = 0x1,
+	HDMI_A_HDCPCFG0_HDMIDVI_DVI = 0x0,
+
+/* A_HDCPCFG1 field values */
+	HDMI_A_HDCPCFG1_DISSHA1CHECK_MASK = 0x8,
+	HDMI_A_HDCPCFG1_DISSHA1CHECK_DISABLE = 0x8,
+	HDMI_A_HDCPCFG1_DISSHA1CHECK_ENABLE = 0x0,
+	HDMI_A_HDCPCFG1_PH2UPSHFTENC_MASK = 0x4,
+	HDMI_A_HDCPCFG1_PH2UPSHFTENC_ENABLE = 0x4,
+	HDMI_A_HDCPCFG1_PH2UPSHFTENC_DISABLE = 0x0,
+	HDMI_A_HDCPCFG1_ENCRYPTIONDISABLE_MASK = 0x2,
+	HDMI_A_HDCPCFG1_ENCRYPTIONDISABLE_DISABLE = 0x2,
+	HDMI_A_HDCPCFG1_ENCRYPTIONDISABLE_ENABLE = 0x0,
+	HDMI_A_HDCPCFG1_SWRESET_MASK = 0x1,
+	HDMI_A_HDCPCFG1_SWRESET_ASSERT = 0x0,
+
+/* A_VIDPOLCFG field values */
+	HDMI_A_VIDPOLCFG_UNENCRYPTCONF_MASK = 0x60,
+	HDMI_A_VIDPOLCFG_UNENCRYPTCONF_OFFSET = 5,
+	HDMI_A_VIDPOLCFG_DATAENPOL_MASK = 0x10,
+	HDMI_A_VIDPOLCFG_DATAENPOL_ACTIVE_HIGH = 0x10,
+	HDMI_A_VIDPOLCFG_DATAENPOL_ACTIVE_LOW = 0x0,
+	HDMI_A_VIDPOLCFG_VSYNCPOL_MASK = 0x8,
+	HDMI_A_VIDPOLCFG_VSYNCPOL_ACTIVE_HIGH = 0x8,
+	HDMI_A_VIDPOLCFG_VSYNCPOL_ACTIVE_LOW = 0x0,
+	HDMI_A_VIDPOLCFG_HSYNCPOL_MASK = 0x2,
+	HDMI_A_VIDPOLCFG_HSYNCPOL_ACTIVE_HIGH = 0x2,
+	HDMI_A_VIDPOLCFG_HSYNCPOL_ACTIVE_LOW = 0x0,
+};
+
+#endif /* __MXC_HDMI_H__ */

arch/arm/include/asm/arch-tegra20/spl.h

@@ -0,0 +1,28 @@
+/*
+ * (C) Copyright 2012
+ * NVIDIA Corporation <www.nvidia.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef	_ASM_ARCH_SPL_H_
+#define	_ASM_ARCH_SPL_H_
+
+#define BOOT_DEVICE_RAM         1
+
+#endif

arch/arm/include/asm/imx-common/iomux-v3.h

@@ -98,6 +98,7 @@ typedef u64 iomux_v3_cfg_t;
 #define MUX_CONFIG_SION		(0x1 << 4)
 
 int imx_iomux_v3_setup_pad(iomux_v3_cfg_t pad);
-int imx_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t *pad_list, unsigned count);
+int imx_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t const *pad_list,
+				     unsigned count);
 
 #endif	/* __MACH_IOMUX_V3_H__*/

arch/arm/include/asm/setup.h

@@ -267,3 +267,8 @@ struct meminfo {
 extern struct meminfo meminfo;
 
 #endif
+
+/*
+ * Board specified tags
+ */
+void setup_board_tags(struct tag **in_params);

arch/arm/lib/bootm.c

@@ -34,6 +34,7 @@
 #include <libfdt.h>
 #include <fdt_support.h>
 #include <asm/bootm.h>
+#include <linux/compiler.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -269,6 +270,8 @@ static int create_fdt(bootm_headers_t *images)
 }
 #endif
 
+__weak void setup_board_tags(struct tag **in_params) {}
+
 /* Subcommand: PREP */
 static void boot_prep_linux(bootm_headers_t *images)
 {
@@ -310,6 +313,7 @@ static void boot_prep_linux(bootm_headers_t *images)
 			setup_initrd_tag(gd->bd, images->rd_start,
 			images->rd_end);
 #endif
+		setup_board_tags(&params);
 		setup_end_tag(gd->bd);
 #else /* all tags */
 		printf("FDT and ATAGS support not compiled in - hanging\n");

board/8dtech/eco5pk/Makefile

@@ -0,0 +1,43 @@
+#
+# (C) Copyright 2000, 2001, 2002
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# Adapted from ti/evm/Makefile
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).o
+
+COBJS	:= eco5pk.o
+
+SRCS	:= $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+
+$(LIB):	$(obj).depend $(OBJS)
+	$(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend

board/8dtech/eco5pk/eco5pk.c

@@ -0,0 +1,61 @@
+/*
+ * eco5pk.c - board file for 8D Technology's AM3517 based eco5pk board
+ *
+ * Based on am3517evm.c
+ *
+ * Copyright (C) 2011-2012 8D Technologies inc.
+ * Copyright (C) 2009 Texas Instruments Incorporated
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <common.h>
+#include <netdev.h>
+#include <asm/io.h>
+#include <asm/arch/mem.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/emac_defs.h>
+#include <asm/gpio.h>
+#include <i2c.h>
+#include <crc.h>
+#include <asm/mach-types.h>
+#include "eco5pk.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * Routine: board_init
+ * Description: Early hardware init.
+ */
+int board_init(void)
+{
+	gpmc_init(); /* in SRAM or SDRAM, finish GPMC */
+	gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
+
+	gpio_request(30, "RESOUT");
+	gpio_direction_output(30, 1);
+	return 0;
+}
+
+/*
+ * Routine: set_muxconf_regs
+ * Description: Setting up the configuration Mux registers specific to the
+ *		hardware. Many pins need to be moved from protect to primary
+ *		mode.
+ */
+void set_muxconf_regs(void)
+{
+	MUX_ECO5_PK();
+}

board/8dtech/eco5pk/eco5pk.h

@@ -0,0 +1,404 @@
+/*
+ * eco5.h - Header file for the 8D Technologies ECO5 board.
+ *
+ * Based on  am3517evm.h
+ * Based on ti/evm/evm.h
+ *
+ * Copyright (C) 2011 8D Technologies inc.
+ * Copyright (C) 2009 Texas Instruments Incorporated
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _ECO5PK_H__
+#define _ECO5PK_H__
+
+const omap3_sysinfo sysinfo = {
+	DDR_DISCRETE,
+	"ECO5 Board",
+	"NAND",
+};
+
+/*
+ * IEN  - Input Enable
+ * IDIS - Input Disable
+ * PTD  - Pull type Down
+ * PTU  - Pull type Up
+ * DIS  - Pull type selection is inactive
+ * EN   - Pull type selection is active
+ * M0   - Mode 0
+ * The commented string gives the final mux configuration for that pin
+ */
+#define MUX_ECO5_PK() \
+	/* SDRC */\
+	MUX_VAL(CP(SDRC_D0),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D1),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D2),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D3),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D4),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D5),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D6),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D7),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D8),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D9),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D10),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D11),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D12),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D13),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D14),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D15),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D16),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D17),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D18),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D19),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D20),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D21),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D22),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D23),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D24),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D25),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D26),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D27),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D28),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D29),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D30),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D31),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_CLK),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_DQS0),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_DQS1),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_DQS2),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_DQS3),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_DQS0N),		(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(SDRC_DQS1N),		(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(SDRC_DQS2N),		(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(SDRC_DQS3N),		(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(SDRC_CKE0),		(M0)) \
+	MUX_VAL(CP(SDRC_CKE1),		(M0)) \
+	MUX_VAL(CP(STRBEN_DLY0),	(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(STRBEN_DLY1),	(IEN  | PTD | EN  | M0)) \
+	/* GPMC */\
+	MUX_VAL(CP(GPMC_A1),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_A2),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_A3),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_A4),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_A5),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_A6),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_A7),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_A8),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_A9),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_A10),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D0),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D1),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D2),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D3),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D4),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D5),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D6),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D7),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D8),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D9),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D10),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D11),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D12),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D13),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D14),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D15),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_NCS0),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_NCS1),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_NCS2),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_NCS3),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_NCS4),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_NCS5),		(IDIS  | PTU | DIS | M3)) \
+	MUX_VAL(CP(GPMC_NCS6),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(GPMC_NCS7),		(IEN  | PTU | DIS  | M4)) \
+	MUX_VAL(CP(GPMC_CLK),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_NADV_ALE),	(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(GPMC_NOE),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(GPMC_NWE),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(GPMC_NBE0_CLE),	(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_NBE1),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_NWP),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(GPMC_WAIT0),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_WAIT1),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_WAIT2),		(IEN  | PTU | EN  | M4)) \
+							 /* - ETH_nRESET*/\
+	MUX_VAL(CP(GPMC_WAIT3),		(IEN  | PTU | EN  | M0)) \
+	/* DSS */\
+	MUX_VAL(CP(DSS_PCLK),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_HSYNC),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_VSYNC),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_ACBIAS),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA0),		(IEN  | PTD | DIS | M4)) \
+	MUX_VAL(CP(DSS_DATA1),		(IEN  | PTD | DIS | M4)) \
+	MUX_VAL(CP(DSS_DATA2),		(IEN  | PTD | DIS | M4)) \
+	MUX_VAL(CP(DSS_DATA3),		(IEN  | PTD | DIS | M4)) \
+	MUX_VAL(CP(DSS_DATA4),		(IEN  | PTD | DIS | M4)) \
+	MUX_VAL(CP(DSS_DATA5),		(IEN  | PTD | DIS | M4)) \
+	MUX_VAL(CP(DSS_DATA6),		(IEN  | PTD | DIS | M4)) \
+	MUX_VAL(CP(DSS_DATA7),		(IEN  | PTD | DIS | M4)) \
+	MUX_VAL(CP(DSS_DATA8),		(IDIS | PTU | EN  | M4)) \
+	MUX_VAL(CP(DSS_DATA9),		(IDIS | PTU | EN  | M4)) \
+	MUX_VAL(CP(DSS_DATA10),		(IDIS | PTU | EN  | M4)) \
+	MUX_VAL(CP(DSS_DATA11),		(IDIS | PTU | EN  | M4)) \
+	MUX_VAL(CP(DSS_DATA12),		(IDIS | PTU | EN  | M4)) \
+	MUX_VAL(CP(DSS_DATA13),		(IDIS | PTD | EN  | M4)) \
+	MUX_VAL(CP(DSS_DATA14),		(IDIS | PTD | EN  | M4)) \
+	MUX_VAL(CP(DSS_DATA15),		(IDIS | PTU | EN  | M4)) \
+	MUX_VAL(CP(DSS_DATA16),		(IDIS | PTU | EN  | M4)) \
+	MUX_VAL(CP(DSS_DATA17),		(IDIS | PTD | EN  | M4)) \
+	MUX_VAL(CP(DSS_DATA18),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA19),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA20),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA21),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA22),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA23),		(IDIS | PTD | DIS | M0)) \
+	/* CAMERA */\
+	MUX_VAL(CP(CAM_HS),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(CAM_VS),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(CAM_XCLKA),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_PCLK),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(CAM_FLD),		(IDIS | PTD | DIS | M4)) /*GPIO_98*/\
+							 /* - CAM_RESET*/\
+	MUX_VAL(CP(CAM_D0),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_D1),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_D2),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_D3),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_D4),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_D5),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_D6),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_D7),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_D8),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_D9),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_D10),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_D11),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_XCLKB),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_WEN),		(IEN  | PTD | DIS | M4)) /*GPIO_167*/\
+	MUX_VAL(CP(CAM_STROBE),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(CSI2_DX0),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CSI2_DY0),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CSI2_DX1),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CSI2_DY1),		(IEN  | PTD | DIS | M0)) \
+	/* MMC */\
+	MUX_VAL(CP(MMC1_CLK),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(MMC1_CMD),		(IEN  | PTU | DIS | M0)) \
+	MUX_VAL(CP(MMC1_DAT0),		(IEN  | PTU | DIS | M0)) \
+	MUX_VAL(CP(MMC1_DAT1),		(IEN  | PTU | DIS | M0)) \
+	MUX_VAL(CP(MMC1_DAT2),		(IEN  | PTU | DIS | M0)) \
+	MUX_VAL(CP(MMC1_DAT3),		(IEN  | PTU | DIS | M0)) \
+	MUX_VAL(CP(MMC1_DAT4),		(IEN  | PTU | EN  | M4)) \
+	MUX_VAL(CP(MMC1_DAT5),		(IEN  | PTU | EN  | M4)) \
+	MUX_VAL(CP(MMC1_DAT6),		(IEN  | PTU | EN  | M4)) \
+	MUX_VAL(CP(MMC1_DAT7),		(IEN  | PTU | EN  | M4)) \
+	\
+	MUX_VAL(CP(MMC2_CLK),		(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(MMC2_CMD),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(MMC2_DAT0),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(MMC2_DAT1),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(MMC2_DAT2),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(MMC2_DAT3),		(IEN  | PTD | DIS | M0)) \
+	/* McBSP */\
+	MUX_VAL(CP(MCBSP_CLKS),		(IEN  | PTU | DIS | M0)) \
+	MUX_VAL(CP(MCBSP1_CLKR),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(MCBSP1_FSR),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(MCBSP1_DX),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(MCBSP1_DR),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(MCBSP1_FSX),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(MCBSP1_CLKX),	(IEN  | PTD | DIS | M0)) \
+	\
+	MUX_VAL(CP(MCBSP2_FSX),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(MCBSP2_CLKX),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(MCBSP2_DR),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(MCBSP2_DX),		(IDIS | PTD | DIS | M0)) \
+	\
+	MUX_VAL(CP(MCBSP3_DX),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(MCBSP3_DR),		(IEN  | PTD | DIS | M0)) \
+	\
+	MUX_VAL(CP(MCBSP3_CLKX),	(IEN  | PTD | DIS | M4)) /* LED ACT */ \
+	\
+	MUX_VAL(CP(MCBSP3_FSX),		(IEN  | PTD | DIS | M0)) \
+	\
+	MUX_VAL(CP(MCBSP4_CLKX),	(IDIS | PTD | DIS | M4)) /*GPIO_152*/\
+							 /* - LCD_INI*/\
+	MUX_VAL(CP(MCBSP4_DR),		(IDIS | PTD | DIS | M4)) /*GPIO_153*/\
+							 /* - LCD_ENVDD */\
+	MUX_VAL(CP(MCBSP4_DX),		(IDIS | PTD | DIS | M4)) /*GPIO_154*/\
+							 /* - LCD_QVGA/nVGA */\
+	MUX_VAL(CP(MCBSP4_FSX),		(IDIS | PTD | DIS | M4)) /*GPIO_155*/\
+							 /* - LCD_RESB */\
+	/* UART */\
+	MUX_VAL(CP(UART1_TX),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(UART1_RTS),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(UART1_CTS),		(IEN  | PTU | DIS | M0)) \
+	\
+	MUX_VAL(CP(UART1_RX),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(UART2_CTS),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(UART2_RTS),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(UART2_TX),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(UART2_RX),		(IEN  | PTD | DIS | M0)) \
+	\
+	MUX_VAL(CP(UART3_CTS_RCTX),	(IEN  | PTU | DIS | M0)) \
+	MUX_VAL(CP(UART3_RTS_SD),	(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(UART3_RX_IRRX),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(UART3_TX_IRTX),	(IDIS | PTD | DIS | M0)) \
+	/* I2C */\
+	MUX_VAL(CP(I2C1_SCL),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(I2C1_SDA),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(I2C2_SCL),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(I2C2_SDA),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(I2C3_SCL),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(I2C3_SDA),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(I2C4_SCL),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(I2C4_SDA),		(IEN  | PTU | EN  | M0)) \
+	/* McSPI */\
+	MUX_VAL(CP(MCSPI1_CLK),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(MCSPI1_SIMO),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(MCSPI1_SOMI),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(MCSPI1_CS0),		(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(MCSPI1_CS1),		(IEN  | PTD | EN  | M4)) /*GPIO_175*/\
+	MUX_VAL(CP(MCSPI1_CS2),		(IEN  | PTU | DIS | M4)) /*GPIO_176*/\
+							 /* - LAN_INTR*/\
+	MUX_VAL(CP(MCSPI1_CS3),		(IEN  | PTD | EN  | M0)) \
+	\
+	MUX_VAL(CP(MCSPI2_CLK),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(MCSPI2_SIMO),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(MCSPI2_SOMI),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(MCSPI2_CS0),		(IEN  | PTD | EN  | M4)) \
+							/* LCD_EN_BACKLIGHT */\
+	MUX_VAL(CP(MCSPI2_CS1),		(IDIS | PTD | EN  | M4)) \
+	/* CCDC */\
+	MUX_VAL(CP(CCDC_PCLK),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(CCDC_FIELD),		(IEN  | PTD | DIS | M1)) \
+	MUX_VAL(CP(CCDC_HD),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(CCDC_VD),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(CCDC_WEN),		(IEN  | PTD | DIS | M1)) \
+	MUX_VAL(CP(CCDC_DATA0),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CCDC_DATA1),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CCDC_DATA2),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CCDC_DATA3),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CCDC_DATA4),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CCDC_DATA5),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CCDC_DATA6),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CCDC_DATA7),		(IEN  | PTD | DIS | M0)) \
+	/* RMII */\
+	MUX_VAL(CP(RMII_MDIO_DATA),	(IEN  |  M0)) \
+	MUX_VAL(CP(RMII_MDIO_CLK),	(M0)) \
+	MUX_VAL(CP(RMII_RXD0)	,	(IEN  | PTD | M0)) \
+	MUX_VAL(CP(RMII_RXD1),		(IEN  | PTD | M0)) \
+	MUX_VAL(CP(RMII_CRS_DV),	(IEN  | PTD | M0)) \
+	MUX_VAL(CP(RMII_RXER),		(PTD | M0)) \
+	MUX_VAL(CP(RMII_TXD0),		(PTD | M0)) \
+	MUX_VAL(CP(RMII_TXD1),		(PTD | M0)) \
+	MUX_VAL(CP(RMII_TXEN),		(PTD | M0)) \
+	MUX_VAL(CP(RMII_50MHZ_CLK),	(IEN  | PTD | EN  | M0)) \
+	/* HECC */\
+	MUX_VAL(CP(HECC1_TXD),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(HECC1_RXD),		(IEN  | PTU | EN  | M0)) \
+	/* HSUSB */\
+	MUX_VAL(CP(HSUSB0_CLK),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(HSUSB0_STP),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(HSUSB0_DIR),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(HSUSB0_NXT),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(HSUSB0_DATA0),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(HSUSB0_DATA1),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(HSUSB0_DATA2),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(HSUSB0_DATA3),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(HSUSB0_DATA4),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(HSUSB0_DATA5),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(HSUSB0_DATA6),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(HSUSB0_DATA7),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(USB0_DRVBUS),	(IEN  | PTD | EN  | M0)) \
+	/* HDQ */\
+	MUX_VAL(CP(HDQ_SIO),		(IEN  | PTU | EN  | M0)) \
+	/* Control and debug */\
+	MUX_VAL(CP(SYS_32K),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SYS_CLKREQ),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SYS_NIRQ),		(IEN  | PTU | EN  | M0)) \
+							/* SYS_nRESWARM */\
+	MUX_VAL(CP(SYS_NRESWARM),	(IDIS | PTU | DIS | M4)) \
+							/* - GPIO30 */\
+	MUX_VAL(CP(SYS_BOOT0),		(IEN  | PTD | DIS | M4)) /* GPIO_2 */\
+							 /* - PEN_IRQ */\
+	MUX_VAL(CP(SYS_BOOT1),		(IEN  | PTD | DIS | M4)) /* GPIO_3 */\
+	MUX_VAL(CP(SYS_BOOT2),		(IEN  | PTD | DIS | M4)) /* GPIO_4 */\
+	MUX_VAL(CP(SYS_BOOT3),		(IEN  | PTD | DIS | M4)) /* GPIO_5 */\
+	MUX_VAL(CP(SYS_BOOT4),		(IEN  | PTD | DIS | M4)) /* GPIO_6 */\
+	MUX_VAL(CP(SYS_BOOT5),		(IEN  | PTD | DIS | M4)) /* GPIO_7 */\
+	MUX_VAL(CP(SYS_BOOT6),		(IDIS | PTD | DIS | M4)) /* GPIO_8 */\
+							 /* - VIO_1V8*/\
+	MUX_VAL(CP(SYS_BOOT7),		(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(SYS_BOOT8),		(IEN  | PTD | EN  | M0)) \
+	\
+	MUX_VAL(CP(SYS_OFF_MODE),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SYS_CLKOUT1),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SYS_CLKOUT2),	(IEN  | PTU | EN  | M0)) \
+	/* JTAG */\
+	MUX_VAL(CP(JTAG_nTRST),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(JTAG_TCK),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(JTAG_TMS),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(JTAG_TDI),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(JTAG_EMU0),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(JTAG_EMU1),		(IEN  | PTD | DIS | M0)) \
+	/* ETK (ES2 onwards) */\
+	MUX_VAL(CP(ETK_CLK_ES2),	(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(ETK_CTL_ES2),	(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(ETK_D0_ES2),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(ETK_D1_ES2),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(ETK_D2_ES2),		(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(ETK_D3_ES2),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(ETK_D4_ES2),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(ETK_D5_ES2),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(ETK_D6_ES2),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(ETK_D7_ES2),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(ETK_D8_ES2),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(ETK_D9_ES2),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(ETK_D10_ES2),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(ETK_D11_ES2),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(ETK_D12_ES2),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(ETK_D13_ES2),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(ETK_D14_ES2),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(ETK_D15_ES2),	(IEN  | PTD | DIS | M0)) \
+	/* Die to Die */\
+	MUX_VAL(CP(D2D_MCAD34),		(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(D2D_MCAD35),		(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(D2D_MCAD36),		(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(D2D_CLK26MI),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_NRESPWRON),	(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(D2D_NRESWARM),	(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(D2D_ARM9NIRQ),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_UMA2P6FIQ),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_SPINT),		(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(D2D_FRINT),		(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(D2D_DMAREQ0),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_DMAREQ1),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_DMAREQ2),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_DMAREQ3),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_N3GTRST),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_N3GTDI),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_N3GTDO),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_N3GTMS),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_N3GTCK),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_N3GRTCK),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_MSTDBY),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(D2D_SWAKEUP),	(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(D2D_IDLEREQ),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_IDLEACK),	(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(D2D_MWRITE),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_SWRITE),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_MREAD),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_SREAD),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_MBUSFLAG),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_SBUSFLAG),	(IEN  | PTD | DIS | M0))
+
+#endif

board/CarMediaLab/flea3/lowlevel_init.S

@@ -22,47 +22,6 @@
  */
 
 #include <config.h>
-#include <asm-offsets.h>
-#include <asm/arch/imx-regs.h>
-#include <generated/asm-offsets.h>
-
-/*
- * Configuration for the flea3 board.
- * These defines are used by the included macros and must
- * be defined first
- */
-#define AIPS_MPR_CONFIG		0x77777777
-#define AIPS_OPACR_CONFIG	0x00000000
-
-/* MPR - priority is M4 > M2 > M3 > M5 > M0 > M1 */
-#define MAX_MPR_CONFIG		0x00302154
-
-/* SGPCR - always park on last master */
-#define MAX_SGPCR_CONFIG	0x00000010
-
-/* MGPCR - restore default values */
-#define MAX_MGPCR_CONFIG	0x00000000
-
-/*
- * M3IF Control Register (M3IFCTL)
- * MRRP[0] = L2CC0 not on priority list (0 << 0) = 0x00000000
- * MRRP[1] = L2CC1 not on priority list (0 << 0) = 0x00000000
- * MRRP[2] = MBX not on priority list (0 << 0)   = 0x00000000
- * MRRP[3] = MAX1 not on priority list (0 << 0)  = 0x00000000
- * MRRP[4] = SDMA not on priority list (0 << 0)  = 0x00000000
- * MRRP[5] = MPEG4 not on priority list (0 << 0) = 0x00000000
- * MRRP[6] = IPU1 on priority list (1 << 6)      = 0x00000040
- * MRRP[7] = IPU2 not on priority list (0 << 0)  = 0x00000000
- *                                               ------------
- *                                                 0x00000040
- */
-#define M3IF_CONFIG		0x00000040
-
-#define CCM_PDR0_CONFIG		0x00801000
-
-/*
- * includes MX35 utility macros
- */
 #include <asm/arch/lowlevel_macro.S>
 
 .globl lowlevel_init

board/avionic-design/medcom-wide/Makefile

@@ -29,9 +29,11 @@ $(shell mkdir -p $(obj)../common $(obj)../../nvidia/common)
 
 LIB	= $(obj)lib$(BOARD).o
 
-COBJS	:= ../../nvidia/common/board.o
-COBJS	+= ../common/tamonten.o
+COBJS-y	:= ../common/tamonten.o
 
+include ../../nvidia/common/common.mk
+
+COBJS	:= $(COBJS-y)
 SRCS	:= $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
 

board/avionic-design/plutux/Makefile

@@ -29,9 +29,11 @@ $(shell mkdir -p $(obj)../common $(obj)../../nvidia/common)
 
 LIB	= $(obj)lib$(BOARD).o
 
-COBJS	:= ../../nvidia/common/board.o
-COBJS	+= ../common/tamonten.o
+COBJS-y	:= ../common/tamonten.o
 
+include ../../nvidia/common/common.mk
+
+COBJS	:= $(COBJS-y)
 SRCS	:= $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
 

board/avionic-design/tec/Makefile

@@ -29,9 +29,11 @@ $(shell mkdir -p $(obj)../common $(obj)../../nvidia/common)
 
 LIB	= $(obj)lib$(BOARD).o
 
-COBJS	:= ../../nvidia/common/board.o
-COBJS	+= ../common/tamonten.o
+COBJS-y	:= ../common/tamonten.o
 
+include ../../nvidia/common/common.mk
+
+COBJS	:= $(COBJS-y)
 SRCS	:= $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
 

board/compal/paz00/Makefile

@@ -20,9 +20,11 @@ $(shell mkdir -p $(obj)../../nvidia/common)
 
 LIB	= $(obj)lib$(BOARD).o
 
-COBJS	:= $(BOARD).o
-COBJS	+= ../../nvidia/common/board.o
+COBJS-y	:= $(BOARD).o
 
+include ../../nvidia/common/common.mk
+
+COBJS	:= $(COBJS-y)
 SRCS	:= $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
 

board/compulab/trimslice/Makefile

@@ -28,9 +28,11 @@ $(shell mkdir -p $(obj)../../nvidia/common)
 
 LIB	= $(obj)lib$(BOARD).o
 
-COBJS	:= $(BOARD).o
-COBJS	+= ../../nvidia/common/board.o
+COBJS-y	:= $(BOARD).o
 
+include ../../nvidia/common/common.mk
+
+COBJS	:= $(COBJS-y)
 SRCS	:= $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
 

board/esg/ima3-mx53/ima3-mx53.c

@@ -217,6 +217,7 @@ int board_mmc_init(bd_t *bis)
 		PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | PAD_CTL_PUE_PULL |
 		PAD_CTL_PKE_ENABLE | PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
 
+	esdhc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
 	return fsl_esdhc_initialize(bis, &esdhc_cfg);
 }
 #endif

board/freescale/mx35pdk/lowlevel_init.S

@@ -23,6 +23,7 @@
 #include <asm/arch/imx-regs.h>
 #include <generated/asm-offsets.h>
 #include "mx35pdk.h"
+#include <asm/arch/lowlevel_macro.S>
 
 /*
  * return soc version
@@ -40,91 +41,6 @@
 	addne \ret, \ret, #0x10
 .endm
 
-/*
- * AIPS setup - Only setup MPROTx registers.
- * The PACR default values are good.
- */
-.macro init_aips
-	/*
-	 * Set all MPROTx to be non-bufferable, trusted for R/W,
-	 * not forced to user-mode.
-	 */
-	ldr r0, =AIPS1_BASE_ADDR
-	ldr r1, =AIPS_MPR_CONFIG
-	str r1, [r0, #0x00]
-	str r1, [r0, #0x04]
-	ldr r0, =AIPS2_BASE_ADDR
-	str r1, [r0, #0x00]
-	str r1, [r0, #0x04]
-
-	/*
-	 * Clear the on and off peripheral modules Supervisor Protect bit
-	 * for SDMA to access them. Did not change the AIPS control registers
-	 * (offset 0x20) access type
-	 */
-	ldr r0, =AIPS1_BASE_ADDR
-	ldr r1, =AIPS_OPACR_CONFIG
-	str r1, [r0, #0x40]
-	str r1, [r0, #0x44]
-	str r1, [r0, #0x48]
-	str r1, [r0, #0x4C]
-	str r1, [r0, #0x50]
-	ldr r0, =AIPS2_BASE_ADDR
-	str r1, [r0, #0x40]
-	str r1, [r0, #0x44]
-	str r1, [r0, #0x48]
-	str r1, [r0, #0x4C]
-	str r1, [r0, #0x50]
-.endm
-
-/* MAX (Multi-Layer AHB Crossbar Switch) setup */
-.macro init_max
-	ldr r0, =MAX_BASE_ADDR
-	/* MPR - priority is M4 > M2 > M3 > M5 > M0 > M1 */
-	ldr r1, =MAX_MPR_CONFIG
-	str r1, [r0, #0x000]        /* for S0 */
-	str r1, [r0, #0x100]        /* for S1 */
-	str r1, [r0, #0x200]        /* for S2 */
-	str r1, [r0, #0x300]        /* for S3 */
-	str r1, [r0, #0x400]        /* for S4 */
-	/* SGPCR - always park on last master */
-	ldr r1, =MAX_SGPCR_CONFIG
-	str r1, [r0, #0x010]        /* for S0 */
-	str r1, [r0, #0x110]        /* for S1 */
-	str r1, [r0, #0x210]        /* for S2 */
-	str r1, [r0, #0x310]        /* for S3 */
-	str r1, [r0, #0x410]        /* for S4 */
-	/* MGPCR - restore default values */
-	ldr r1, =MAX_MGPCR_CONFIG
-	str r1, [r0, #0x800]        /* for M0 */
-	str r1, [r0, #0x900]        /* for M1 */
-	str r1, [r0, #0xA00]        /* for M2 */
-	str r1, [r0, #0xB00]        /* for M3 */
-	str r1, [r0, #0xC00]        /* for M4 */
-	str r1, [r0, #0xD00]        /* for M5 */
-.endm
-
-/* M3IF setup */
-.macro init_m3if
-	/* Configure M3IF registers */
-	ldr r1, =M3IF_BASE_ADDR
-	/*
-	* M3IF Control Register (M3IFCTL)
-	* MRRP[0] = L2CC0 not on priority list (0 << 0)	= 0x00000000
-	* MRRP[1] = L2CC1 not on priority list (0 << 0)	= 0x00000000
-	* MRRP[2] = MBX not on priority list (0 << 0)	= 0x00000000
-	* MRRP[3] = MAX1 not on priority list (0 << 0)	= 0x00000000
-	* MRRP[4] = SDMA not on priority list (0 << 0)	= 0x00000000
-	* MRRP[5] = MPEG4 not on priority list (0 << 0)	= 0x00000000
-	* MRRP[6] = IPU1 on priority list (1 << 6)	= 0x00000040
-	* MRRP[7] = IPU2 not on priority list (0 << 0)	= 0x00000000
-	*						------------
-	*						  0x00000040
-	*/
-	ldr r0, =M3IF_CONFIG
-	str r0, [r1]  /* M3IF control reg */
-.endm
-
 /* CPLD on CS5 setup */
 .macro init_debug_board
 	ldr r0, =DBG_BASE_ADDR
@@ -210,38 +126,7 @@
 lowlevel_init:
 	mov r10, lr
 
-	mrc 15, 0, r1, c1, c0, 0
-
-	mrc 15, 0, r0, c1, c0, 1
-	orr r0, r0, #7
-	mcr 15, 0, r0, c1, c0, 1
-	orr r1, r1, #(1<<11)
-
-	/* Set unaligned access enable */
-	orr r1, r1, #(1<<22)
-
-	/* Set low int latency enable */
-	orr r1, r1, #(1<<21)
-
-	mcr 15, 0, r1, c1, c0, 0
-
-	mov r0, #0
-
-	/* Set branch prediction enable */
-	mcr 15, 0, r0, c15, c2, 4
-
-	mcr 15, 0, r0, c7, c7, 0        /* invalidate I cache and D cache */
-	mcr 15, 0, r0, c8, c7, 0        /* invalidate TLBs */
-	mcr 15, 0, r0, c7, c10, 4       /* Drain the write buffer */
-
-	/*
-	 * initializes very early AIPS
-	 * Then it also initializes Multi-Layer AHB Crossbar Switch,
-	 * M3IF
-	 * Also setup the Peripheral Port Remap register inside the core
-	 */
-	ldr r0, =0x40000015        /* start from AIPS 2GB region */
-	mcr p15, 0, r0, c15, c2, 4
+	core_init
 
 	init_aips
 

board/freescale/mx35pdk/mx35pdk.c

@@ -27,6 +27,7 @@
 #include <asm/errno.h>
 #include <asm/arch/imx-regs.h>
 #include <asm/arch/crm_regs.h>
+#include <asm/arch/clock.h>
 #include <asm/arch/mx35_pins.h>
 #include <asm/arch/iomux.h>
 #include <i2c.h>
@@ -292,6 +293,7 @@ int board_mmc_init(bd_t *bis)
 	mxc_request_iomux(MX35_PIN_SD1_DATA2, MUX_CONFIG_FUNC);
 	mxc_request_iomux(MX35_PIN_SD1_DATA3, MUX_CONFIG_FUNC);
 
+	esdhc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC1_CLK);
 	return fsl_esdhc_initialize(bis, &esdhc_cfg);
 }
 

board/freescale/mx35pdk/mx35pdk.h

@@ -26,31 +26,6 @@
 #ifndef __BOARD_MX35_3STACK_H
 #define __BOARD_MX35_3STACK_H
 
-#define AIPS_MPR_CONFIG		0x77777777
-#define AIPS_OPACR_CONFIG	0x00000000
-
-/* MPR - priority is M4 > M2 > M3 > M5 > M0 > M1 */
-#define MAX_MPR_CONFIG		0x00302154
-/* SGPCR - always park on last master */
-#define MAX_SGPCR_CONFIG	0x00000010
-/* MGPCR - restore default values */
-#define MAX_MGPCR_CONFIG	0x00000000
-
-/*
- * M3IF Control Register (M3IFCTL)
- * MRRP[0] = L2CC0 not on priority list (0 << 0) = 0x00000000
- * MRRP[1] = L2CC1 not on priority list (0 << 0) = 0x00000000
- * MRRP[2] = MBX not on priority list (0 << 0)   = 0x00000000
- * MRRP[3] = MAX1 not on priority list (0 << 0)  = 0x00000000
- * MRRP[4] = SDMA not on priority list (0 << 0)  = 0x00000000
- * MRRP[5] = MPEG4 not on priority list (0 << 0) = 0x00000000
- * MRRP[6] = IPU1 on priority list (1 << 6)      = 0x00000040
- * MRRP[7] = IPU2 not on priority list (0 << 0)  = 0x00000000
- *                                               ------------
- *                                                 0x00000040
- */
-#define M3IF_CONFIG	0x00000040
-
 #define DBG_BASE_ADDR		WEIM_CTRL_CS5
 #define DBG_CSCR_U_CONFIG	0x0000D843
 #define DBG_CSCR_L_CONFIG	0x22252521

board/freescale/mx51evk/mx51evk.c

@@ -29,6 +29,7 @@
 #include <asm/errno.h>
 #include <asm/arch/sys_proto.h>
 #include <asm/arch/crm_regs.h>
+#include <asm/arch/clock.h>
 #include <i2c.h>
 #include <mmc.h>
 #include <fsl_esdhc.h>
@@ -358,6 +359,9 @@ int board_mmc_init(bd_t *bis)
 	u32 index;
 	s32 status = 0;
 
+	esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
+	esdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
+
 	for (index = 0; index < CONFIG_SYS_FSL_ESDHC_NUM;
 			index++) {
 		switch (index) {
@@ -467,7 +471,7 @@ int board_mmc_init(bd_t *bis)
 }
 #endif
 
-static struct fb_videomode claa_wvga = {
+static struct fb_videomode const claa_wvga = {
 	.name		= "CLAA07LC0ACW",
 	.refresh	= 57,
 	.xres		= 800,

board/freescale/mx53ard/mx53ard.c

@@ -26,6 +26,7 @@
 #include <asm/arch/mx5x_pins.h>
 #include <asm/arch/sys_proto.h>
 #include <asm/arch/crm_regs.h>
+#include <asm/arch/clock.h>
 #include <asm/arch/iomux.h>
 #include <asm/errno.h>
 #include <netdev.h>
@@ -106,6 +107,9 @@ int board_mmc_init(bd_t *bis)
 	u32 index;
 	s32 status = 0;
 
+	esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
+	esdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
+
 	for (index = 0; index < CONFIG_SYS_FSL_ESDHC_NUM; index++) {
 		switch (index) {
 		case 0:

board/freescale/mx53evk/mx53evk.c

@@ -26,6 +26,7 @@
 #include <asm/arch/mx5x_pins.h>
 #include <asm/arch/sys_proto.h>
 #include <asm/arch/crm_regs.h>
+#include <asm/arch/clock.h>
 #include <asm/arch/iomux.h>
 #include <asm/errno.h>
 #include <asm/imx-common/boot_mode.h>
@@ -232,6 +233,9 @@ int board_mmc_init(bd_t *bis)
 	u32 index;
 	s32 status = 0;
 
+	esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
+	esdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
+
 	for (index = 0; index < CONFIG_SYS_FSL_ESDHC_NUM; index++) {
 		switch (index) {
 		case 0:

board/freescale/mx53loco/mx53loco.c

@@ -192,6 +192,9 @@ int board_mmc_init(bd_t *bis)
 	u32 index;
 	s32 status = 0;
 
+	esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
+	esdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
+
 	for (index = 0; index < CONFIG_SYS_FSL_ESDHC_NUM; index++) {
 		switch (index) {
 		case 0:
@@ -409,7 +412,7 @@ static void clock_1GHz(void)
 		printf("CPU:   Switch DDR clock to 400MHz failed\n");
 }
 
-static struct fb_videomode claa_wvga = {
+static struct fb_videomode const claa_wvga = {
 	.name		= "CLAA07LC0ACW",
 	.refresh	= 57,
 	.xres		= 800,

board/freescale/mx53smd/mx53smd.c

@@ -26,6 +26,7 @@
 #include <asm/arch/mx5x_pins.h>
 #include <asm/arch/sys_proto.h>
 #include <asm/arch/crm_regs.h>
+#include <asm/arch/clock.h>
 #include <asm/arch/iomux.h>
 #include <asm/errno.h>
 #include <netdev.h>
@@ -144,6 +145,8 @@ int board_mmc_init(bd_t *bis)
 	u32 index;
 	s32 status = 0;
 
+	esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
+
 	for (index = 0; index < CONFIG_SYS_FSL_ESDHC_NUM; index++) {
 		switch (index) {
 		case 0:

board/freescale/mx6qarm2/mx6qarm2.c

@@ -24,6 +24,7 @@
 #include <asm/io.h>
 #include <asm/arch/imx-regs.h>
 #include <asm/arch/mx6x_pins.h>
+#include <asm/arch/clock.h>
 #include <asm/errno.h>
 #include <asm/gpio.h>
 #include <asm/imx-common/iomux-v3.h>
@@ -53,12 +54,12 @@ int dram_init(void)
 	return 0;
 }
 
-iomux_v3_cfg_t uart4_pads[] = {
+iomux_v3_cfg_t const uart4_pads[] = {
 	MX6Q_PAD_KEY_COL0__UART4_TXD | MUX_PAD_CTRL(UART_PAD_CTRL),
 	MX6Q_PAD_KEY_ROW0__UART4_RXD | MUX_PAD_CTRL(UART_PAD_CTRL),
 };
 
-iomux_v3_cfg_t usdhc3_pads[] = {
+iomux_v3_cfg_t const usdhc3_pads[] = {
 	MX6Q_PAD_SD3_CLK__USDHC3_CLK   | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 	MX6Q_PAD_SD3_CMD__USDHC3_CMD   | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 	MX6Q_PAD_SD3_DAT0__USDHC3_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
@@ -72,7 +73,7 @@ iomux_v3_cfg_t usdhc3_pads[] = {
 	MX6Q_PAD_NANDF_CS0__GPIO_6_11  | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */
 };
 
-iomux_v3_cfg_t usdhc4_pads[] = {
+iomux_v3_cfg_t const usdhc4_pads[] = {
 	MX6Q_PAD_SD4_CLK__USDHC4_CLK   | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 	MX6Q_PAD_SD4_CMD__USDHC4_CMD   | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 	MX6Q_PAD_SD4_DAT0__USDHC4_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
@@ -85,7 +86,7 @@ iomux_v3_cfg_t usdhc4_pads[] = {
 	MX6Q_PAD_SD4_DAT7__USDHC4_DAT7 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 };
 
-iomux_v3_cfg_t enet_pads[] = {
+iomux_v3_cfg_t const enet_pads[] = {
 	MX6Q_PAD_KEY_COL1__ENET_MDIO        | MUX_PAD_CTRL(ENET_PAD_CTRL),
 	MX6Q_PAD_KEY_COL2__ENET_MDC         | MUX_PAD_CTRL(ENET_PAD_CTRL),
 	MX6Q_PAD_RGMII_TXC__ENET_RGMII_TXC  | MUX_PAD_CTRL(ENET_PAD_CTRL),
@@ -139,6 +140,9 @@ int board_mmc_init(bd_t *bis)
 	s32 status = 0;
 	u32 index = 0;
 
+	usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
+	usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK);
+
 	for (index = 0; index < CONFIG_SYS_FSL_USDHC_NUM; ++index) {
 		switch (index) {
 		case 0:

board/freescale/mx6qsabreauto/mx6qsabreauto.c

@@ -30,6 +30,8 @@
 #include <fsl_esdhc.h>
 #include <miiphy.h>
 #include <netdev.h>
+#include <asm/arch/sys_proto.h>
+
 DECLARE_GLOBAL_DATA_PTR;
 
 #define UART_PAD_CTRL  (PAD_CTL_PKE | PAD_CTL_PUE |            \
@@ -51,12 +53,12 @@ int dram_init(void)
 	return 0;
 }
 
-iomux_v3_cfg_t uart4_pads[] = {
+iomux_v3_cfg_t const uart4_pads[] = {
 	MX6Q_PAD_KEY_COL0__UART4_TXD | MUX_PAD_CTRL(UART_PAD_CTRL),
 	MX6Q_PAD_KEY_ROW0__UART4_RXD | MUX_PAD_CTRL(UART_PAD_CTRL),
 };
 
-iomux_v3_cfg_t enet_pads[] = {
+iomux_v3_cfg_t const enet_pads[] = {
 	MX6Q_PAD_KEY_COL1__ENET_MDIO		| MUX_PAD_CTRL(ENET_PAD_CTRL),
 	MX6Q_PAD_KEY_COL2__ENET_MDC		| MUX_PAD_CTRL(ENET_PAD_CTRL),
 	MX6Q_PAD_RGMII_TXC__ENET_RGMII_TXC	| MUX_PAD_CTRL(ENET_PAD_CTRL),
@@ -79,7 +81,7 @@ static void setup_iomux_enet(void)
 	imx_iomux_v3_setup_multiple_pads(enet_pads, ARRAY_SIZE(enet_pads));
 }
 
-iomux_v3_cfg_t usdhc3_pads[] = {
+iomux_v3_cfg_t const usdhc3_pads[] = {
 	MX6Q_PAD_SD3_CLK__USDHC3_CLK	| MUX_PAD_CTRL(USDHC_PAD_CTRL),
 	MX6Q_PAD_SD3_CMD__USDHC3_CMD	| MUX_PAD_CTRL(USDHC_PAD_CTRL),
 	MX6Q_PAD_SD3_DAT0__USDHC3_DAT0	| MUX_PAD_CTRL(USDHC_PAD_CTRL),
@@ -114,6 +116,7 @@ int board_mmc_init(bd_t *bis)
 {
 	imx_iomux_v3_setup_multiple_pads(usdhc3_pads, ARRAY_SIZE(usdhc3_pads));
 
+	usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
 	return fsl_esdhc_initialize(bis, &usdhc_cfg[0]);
 }
 #endif
@@ -164,9 +167,38 @@ int board_eth_init(bd_t *bis)
 	return 0;
 }
 
+#define BOARD_REV_B  0x200
+#define BOARD_REV_A  0x100
+
+static int mx6sabre_rev(void)
+{
+	/*
+	 * Get Board ID information from OCOTP_GP1[15:8]
+	 * i.MX6Q ARD RevA: 0x01
+	 * i.MX6Q ARD RevB: 0x02
+	 */
+	struct ocotp_regs *ocotp = (struct ocotp_regs *)OCOTP_BASE_ADDR;
+	int reg = readl(&ocotp->gp1);
+	int ret;
+
+	switch (reg >> 8 & 0x0F) {
+	case 0x02:
+		ret = BOARD_REV_B;
+		break;
+	case 0x01:
+	default:
+		ret = BOARD_REV_A;
+		break;
+	}
+
+	return ret;
+}
+
 u32 get_board_rev(void)
 {
-	return 0x63000;
+	int rev = mx6sabre_rev();
+
+	return (get_cpu_rev() & ~(0xF << 8)) | rev;
 }
 
 int board_early_init_f(void)
@@ -186,7 +218,20 @@ int board_init(void)
 
 int checkboard(void)
 {
-	puts("Board: MX6Q-Sabreauto\n");
+	int rev = mx6sabre_rev();
+	char *revname;
+
+	switch (rev) {
+	case BOARD_REV_B:
+		revname = "B";
+		break;
+	case BOARD_REV_A:
+	default:
+		revname = "A";
+		break;
+	}
+
+	printf("Board: MX6Q-Sabreauto rev%s\n", revname);
 
 	return 0;
 }

board/freescale/mx6qsabrelite/mx6qsabrelite.c

@@ -36,6 +36,12 @@
 #include <micrel.h>
 #include <miiphy.h>
 #include <netdev.h>
+#include <linux/fb.h>
+#include <ipu_pixfmt.h>
+#include <asm/arch/crm_regs.h>
+#include <asm/arch/mxc_hdmi.h>
+#include <i2c.h>
+
 DECLARE_GLOBAL_DATA_PTR;
 
 #define UART_PAD_CTRL  (PAD_CTL_PKE | PAD_CTL_PUE |	       \
@@ -70,12 +76,12 @@ int dram_init(void)
        return 0;
 }
 
-iomux_v3_cfg_t uart1_pads[] = {
+iomux_v3_cfg_t const uart1_pads[] = {
 	MX6Q_PAD_SD3_DAT6__UART1_RXD | MUX_PAD_CTRL(UART_PAD_CTRL),
 	MX6Q_PAD_SD3_DAT7__UART1_TXD | MUX_PAD_CTRL(UART_PAD_CTRL),
 };
 
-iomux_v3_cfg_t uart2_pads[] = {
+iomux_v3_cfg_t const uart2_pads[] = {
        MX6Q_PAD_EIM_D26__UART2_TXD | MUX_PAD_CTRL(UART_PAD_CTRL),
        MX6Q_PAD_EIM_D27__UART2_RXD | MUX_PAD_CTRL(UART_PAD_CTRL),
 };
@@ -124,7 +130,7 @@ struct i2c_pads_info i2c_pad_info2 = {
 	}
 };
 
-iomux_v3_cfg_t usdhc3_pads[] = {
+iomux_v3_cfg_t const usdhc3_pads[] = {
        MX6Q_PAD_SD3_CLK__USDHC3_CLK   | MUX_PAD_CTRL(USDHC_PAD_CTRL),
        MX6Q_PAD_SD3_CMD__USDHC3_CMD   | MUX_PAD_CTRL(USDHC_PAD_CTRL),
        MX6Q_PAD_SD3_DAT0__USDHC3_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
@@ -134,7 +140,7 @@ iomux_v3_cfg_t usdhc3_pads[] = {
        MX6Q_PAD_SD3_DAT5__GPIO_7_0    | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */
 };
 
-iomux_v3_cfg_t usdhc4_pads[] = {
+iomux_v3_cfg_t const usdhc4_pads[] = {
        MX6Q_PAD_SD4_CLK__USDHC4_CLK   | MUX_PAD_CTRL(USDHC_PAD_CTRL),
        MX6Q_PAD_SD4_CMD__USDHC4_CMD   | MUX_PAD_CTRL(USDHC_PAD_CTRL),
        MX6Q_PAD_SD4_DAT0__USDHC4_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
@@ -144,7 +150,7 @@ iomux_v3_cfg_t usdhc4_pads[] = {
        MX6Q_PAD_NANDF_D6__GPIO_2_6    | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */
 };
 
-iomux_v3_cfg_t enet_pads1[] = {
+iomux_v3_cfg_t const enet_pads1[] = {
 	MX6Q_PAD_ENET_MDIO__ENET_MDIO		| MUX_PAD_CTRL(ENET_PAD_CTRL),
 	MX6Q_PAD_ENET_MDC__ENET_MDC		| MUX_PAD_CTRL(ENET_PAD_CTRL),
 	MX6Q_PAD_RGMII_TXC__ENET_RGMII_TXC	| MUX_PAD_CTRL(ENET_PAD_CTRL),
@@ -170,7 +176,7 @@ iomux_v3_cfg_t enet_pads1[] = {
 	MX6Q_PAD_EIM_D23__GPIO_3_23		| MUX_PAD_CTRL(NO_PAD_CTRL),
 };
 
-iomux_v3_cfg_t enet_pads2[] = {
+iomux_v3_cfg_t const enet_pads2[] = {
 	MX6Q_PAD_RGMII_RXC__ENET_RGMII_RXC	| MUX_PAD_CTRL(ENET_PAD_CTRL),
 	MX6Q_PAD_RGMII_RD0__ENET_RGMII_RD0	| MUX_PAD_CTRL(ENET_PAD_CTRL),
 	MX6Q_PAD_RGMII_RD1__ENET_RGMII_RD1	| MUX_PAD_CTRL(ENET_PAD_CTRL),
@@ -180,7 +186,7 @@ iomux_v3_cfg_t enet_pads2[] = {
 };
 
 /* Button assignments for J14 */
-static iomux_v3_cfg_t button_pads[] = {
+static iomux_v3_cfg_t const button_pads[] = {
 	/* Menu */
 	MX6Q_PAD_NANDF_D1__GPIO_2_1	| MUX_PAD_CTRL(BUTTON_PAD_CTRL),
 	/* Back */
@@ -213,7 +219,7 @@ static void setup_iomux_enet(void)
 	imx_iomux_v3_setup_multiple_pads(enet_pads2, ARRAY_SIZE(enet_pads2));
 }
 
-iomux_v3_cfg_t usb_pads[] = {
+iomux_v3_cfg_t const usb_pads[] = {
 	MX6Q_PAD_GPIO_17__GPIO_7_12 | MUX_PAD_CTRL(NO_PAD_CTRL),
 };
 
@@ -264,6 +270,9 @@ int board_mmc_init(bd_t *bis)
        s32 status = 0;
        u32 index = 0;
 
+	usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
+	usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK);
+
        for (index = 0; index < CONFIG_SYS_FSL_USDHC_NUM; ++index) {
 	       switch (index) {
 	       case 0:
@@ -294,7 +303,7 @@ u32 get_board_rev(void)
 }
 
 #ifdef CONFIG_MXC_SPI
-iomux_v3_cfg_t ecspi1_pads[] = {
+iomux_v3_cfg_t const ecspi1_pads[] = {
 	/* SS1 */
 	MX6Q_PAD_EIM_D19__GPIO_3_19   | MUX_PAD_CTRL(SPI_PAD_CTRL),
 	MX6Q_PAD_EIM_D17__ECSPI1_MISO | MUX_PAD_CTRL(SPI_PAD_CTRL),
@@ -372,14 +381,337 @@ int setup_sata(void)
 }
 #endif
 
+#if defined(CONFIG_VIDEO_IPUV3)
+
+static iomux_v3_cfg_t const backlight_pads[] = {
+	/* Backlight on RGB connector: J15 */
+	MX6Q_PAD_SD1_DAT3__GPIO_1_21 | MUX_PAD_CTRL(NO_PAD_CTRL),
+#define RGB_BACKLIGHT_GP IMX_GPIO_NR(1, 21)
+
+	/* Backlight on LVDS connector: J6 */
+	MX6Q_PAD_SD1_CMD__GPIO_1_18 | MUX_PAD_CTRL(NO_PAD_CTRL),
+#define LVDS_BACKLIGHT_GP IMX_GPIO_NR(1, 18)
+};
+
+static iomux_v3_cfg_t const rgb_pads[] = {
+	MX6Q_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK,
+	MX6Q_PAD_DI0_PIN15__IPU1_DI0_PIN15,
+	MX6Q_PAD_DI0_PIN2__IPU1_DI0_PIN2,
+	MX6Q_PAD_DI0_PIN3__IPU1_DI0_PIN3,
+	MX6Q_PAD_DI0_PIN4__GPIO_4_20,
+	MX6Q_PAD_DISP0_DAT0__IPU1_DISP0_DAT_0,
+	MX6Q_PAD_DISP0_DAT1__IPU1_DISP0_DAT_1,
+	MX6Q_PAD_DISP0_DAT2__IPU1_DISP0_DAT_2,
+	MX6Q_PAD_DISP0_DAT3__IPU1_DISP0_DAT_3,
+	MX6Q_PAD_DISP0_DAT4__IPU1_DISP0_DAT_4,
+	MX6Q_PAD_DISP0_DAT5__IPU1_DISP0_DAT_5,
+	MX6Q_PAD_DISP0_DAT6__IPU1_DISP0_DAT_6,
+	MX6Q_PAD_DISP0_DAT7__IPU1_DISP0_DAT_7,
+	MX6Q_PAD_DISP0_DAT8__IPU1_DISP0_DAT_8,
+	MX6Q_PAD_DISP0_DAT9__IPU1_DISP0_DAT_9,
+	MX6Q_PAD_DISP0_DAT10__IPU1_DISP0_DAT_10,
+	MX6Q_PAD_DISP0_DAT11__IPU1_DISP0_DAT_11,
+	MX6Q_PAD_DISP0_DAT12__IPU1_DISP0_DAT_12,
+	MX6Q_PAD_DISP0_DAT13__IPU1_DISP0_DAT_13,
+	MX6Q_PAD_DISP0_DAT14__IPU1_DISP0_DAT_14,
+	MX6Q_PAD_DISP0_DAT15__IPU1_DISP0_DAT_15,
+	MX6Q_PAD_DISP0_DAT16__IPU1_DISP0_DAT_16,
+	MX6Q_PAD_DISP0_DAT17__IPU1_DISP0_DAT_17,
+	MX6Q_PAD_DISP0_DAT18__IPU1_DISP0_DAT_18,
+	MX6Q_PAD_DISP0_DAT19__IPU1_DISP0_DAT_19,
+	MX6Q_PAD_DISP0_DAT20__IPU1_DISP0_DAT_20,
+	MX6Q_PAD_DISP0_DAT21__IPU1_DISP0_DAT_21,
+	MX6Q_PAD_DISP0_DAT22__IPU1_DISP0_DAT_22,
+	MX6Q_PAD_DISP0_DAT23__IPU1_DISP0_DAT_23,
+};
+
+struct display_info_t {
+	int	bus;
+	int	addr;
+	int	pixfmt;
+	int	(*detect)(struct display_info_t const *dev);
+	void	(*enable)(struct display_info_t const *dev);
+	struct	fb_videomode mode;
+};
+
+
+static int detect_hdmi(struct display_info_t const *dev)
+{
+	return __raw_readb(HDMI_ARB_BASE_ADDR+HDMI_PHY_STAT0) & HDMI_PHY_HPD;
+}
+
+static void enable_hdmi(struct display_info_t const *dev)
+{
+	u8 reg;
+	printf("%s: setup HDMI monitor\n", __func__);
+	reg = __raw_readb(
+			HDMI_ARB_BASE_ADDR
+			+HDMI_PHY_CONF0);
+	reg |= HDMI_PHY_CONF0_PDZ_MASK;
+	__raw_writeb(reg,
+		     HDMI_ARB_BASE_ADDR
+			+HDMI_PHY_CONF0);
+	udelay(3000);
+	reg |= HDMI_PHY_CONF0_ENTMDS_MASK;
+	__raw_writeb(reg,
+		     HDMI_ARB_BASE_ADDR
+			+HDMI_PHY_CONF0);
+	udelay(3000);
+	reg |= HDMI_PHY_CONF0_GEN2_TXPWRON_MASK;
+	__raw_writeb(reg,
+		     HDMI_ARB_BASE_ADDR
+			+HDMI_PHY_CONF0);
+	__raw_writeb(HDMI_MC_PHYRSTZ_ASSERT,
+		     HDMI_ARB_BASE_ADDR+HDMI_MC_PHYRSTZ);
+}
+
+static int detect_i2c(struct display_info_t const *dev)
+{
+	return ((0 == i2c_set_bus_num(dev->bus))
+		&&
+		(0 == i2c_probe(dev->addr)));
+}
+
+static void enable_lvds(struct display_info_t const *dev)
+{
+	struct iomuxc *iomux = (struct iomuxc *)
+				IOMUXC_BASE_ADDR;
+	u32 reg = readl(&iomux->gpr[2]);
+	reg |= IOMUXC_GPR2_DATA_WIDTH_CH0_24BIT;
+	writel(reg, &iomux->gpr[2]);
+	gpio_direction_output(LVDS_BACKLIGHT_GP, 1);
+}
+
+static void enable_rgb(struct display_info_t const *dev)
+{
+	imx_iomux_v3_setup_multiple_pads(
+		rgb_pads,
+		 ARRAY_SIZE(rgb_pads));
+	gpio_direction_output(RGB_BACKLIGHT_GP, 1);
+}
+
+static struct display_info_t const displays[] = {{
+	.bus	= -1,
+	.addr	= 0,
+	.pixfmt	= IPU_PIX_FMT_RGB24,
+	.detect	= detect_hdmi,
+	.enable	= enable_hdmi,
+	.mode	= {
+		.name           = "HDMI",
+		.refresh        = 60,
+		.xres           = 1024,
+		.yres           = 768,
+		.pixclock       = 15385,
+		.left_margin    = 220,
+		.right_margin   = 40,
+		.upper_margin   = 21,
+		.lower_margin   = 7,
+		.hsync_len      = 60,
+		.vsync_len      = 10,
+		.sync           = FB_SYNC_EXT,
+		.vmode          = FB_VMODE_NONINTERLACED
+} }, {
+	.bus	= 2,
+	.addr	= 0x4,
+	.pixfmt	= IPU_PIX_FMT_LVDS666,
+	.detect	= detect_i2c,
+	.enable	= enable_lvds,
+	.mode	= {
+		.name           = "Hannstar-XGA",
+		.refresh        = 60,
+		.xres           = 1024,
+		.yres           = 768,
+		.pixclock       = 15385,
+		.left_margin    = 220,
+		.right_margin   = 40,
+		.upper_margin   = 21,
+		.lower_margin   = 7,
+		.hsync_len      = 60,
+		.vsync_len      = 10,
+		.sync           = FB_SYNC_EXT,
+		.vmode          = FB_VMODE_NONINTERLACED
+} }, {
+	.bus	= 2,
+	.addr	= 0x38,
+	.pixfmt	= IPU_PIX_FMT_LVDS666,
+	.detect	= detect_i2c,
+	.enable	= enable_lvds,
+	.mode	= {
+		.name           = "wsvga-lvds",
+		.refresh        = 60,
+		.xres           = 1024,
+		.yres           = 600,
+		.pixclock       = 15385,
+		.left_margin    = 220,
+		.right_margin   = 40,
+		.upper_margin   = 21,
+		.lower_margin   = 7,
+		.hsync_len      = 60,
+		.vsync_len      = 10,
+		.sync           = FB_SYNC_EXT,
+		.vmode          = FB_VMODE_NONINTERLACED
+} }, {
+	.bus	= 2,
+	.addr	= 0x48,
+	.pixfmt	= IPU_PIX_FMT_RGB666,
+	.detect	= detect_i2c,
+	.enable	= enable_rgb,
+	.mode	= {
+		.name           = "wvga-rgb",
+		.refresh        = 57,
+		.xres           = 800,
+		.yres           = 480,
+		.pixclock       = 37037,
+		.left_margin    = 40,
+		.right_margin   = 60,
+		.upper_margin   = 10,
+		.lower_margin   = 10,
+		.hsync_len      = 20,
+		.vsync_len      = 10,
+		.sync           = 0,
+		.vmode          = FB_VMODE_NONINTERLACED
+} } };
+
+int board_video_skip(void)
+{
+	int i;
+	int ret;
+	char const *panel = getenv("panel");
+	if (!panel) {
+		for (i = 0; i < ARRAY_SIZE(displays); i++) {
+			struct display_info_t const *dev = displays+i;
+			if (dev->detect(dev)) {
+				panel = dev->mode.name;
+				printf("auto-detected panel %s\n", panel);
+				break;
+			}
+		}
+		if (!panel) {
+			panel = displays[0].mode.name;
+			printf("No panel detected: default to %s\n", panel);
+		}
+	} else {
+		for (i = 0; i < ARRAY_SIZE(displays); i++) {
+			if (!strcmp(panel, displays[i].mode.name))
+				break;
+		}
+	}
+	if (i < ARRAY_SIZE(displays)) {
+		ret = ipuv3_fb_init(&displays[i].mode, 0,
+				    displays[i].pixfmt);
+		if (!ret) {
+			displays[i].enable(displays+i);
+			printf("Display: %s (%ux%u)\n",
+			       displays[i].mode.name,
+			       displays[i].mode.xres,
+			       displays[i].mode.yres);
+		} else
+			printf("LCD %s cannot be configured: %d\n",
+			       displays[i].mode.name, ret);
+	} else {
+		printf("unsupported panel %s\n", panel);
+		ret = -EINVAL;
+	}
+	return (0 != ret);
+}
+
+static void setup_display(void)
+{
+	struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
+	struct anatop_regs *anatop = (struct anatop_regs *)ANATOP_BASE_ADDR;
+	struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
+
+	int reg;
+
+	/* Turn on LDB0,IPU,IPU DI0 clocks */
+	reg = __raw_readl(&mxc_ccm->CCGR3);
+	reg |=   MXC_CCM_CCGR3_IPU1_IPU_DI0_OFFSET
+		|MXC_CCM_CCGR3_LDB_DI0_MASK;
+	writel(reg, &mxc_ccm->CCGR3);
+
+	/* Turn on HDMI PHY clock */
+	reg = __raw_readl(&mxc_ccm->CCGR2);
+	reg |=  MXC_CCM_CCGR2_HDMI_TX_IAHBCLK_MASK
+	       |MXC_CCM_CCGR2_HDMI_TX_ISFRCLK_MASK;
+	writel(reg, &mxc_ccm->CCGR2);
+
+	/* clear HDMI PHY reset */
+	__raw_writeb(HDMI_MC_PHYRSTZ_DEASSERT,
+		     HDMI_ARB_BASE_ADDR+HDMI_MC_PHYRSTZ);
+
+	/* set PFD1_FRAC to 0x13 == 455 MHz (480*18)/0x13 */
+	writel(ANATOP_PFD_480_PFD1_FRAC_MASK, &anatop->pfd_480_clr);
+	writel(0x13<<ANATOP_PFD_480_PFD1_FRAC_SHIFT, &anatop->pfd_480_set);
+
+	/* set LDB0, LDB1 clk select to 011/011 */
+	reg = readl(&mxc_ccm->cs2cdr);
+	reg &= ~(MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_MASK
+		 |MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_MASK);
+	reg |= (3<<MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_OFFSET)
+	      |(3<<MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_OFFSET);
+	writel(reg, &mxc_ccm->cs2cdr);
+
+	reg = readl(&mxc_ccm->cscmr2);
+	reg |= MXC_CCM_CSCMR2_LDB_DI0_IPU_DIV;
+	writel(reg, &mxc_ccm->cscmr2);
+
+	reg = readl(&mxc_ccm->chsccdr);
+	reg &= ~(MXC_CCM_CHSCCDR_IPU1_DI0_PRE_CLK_SEL_MASK
+		|MXC_CCM_CHSCCDR_IPU1_DI0_PODF_MASK
+		|MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_MASK);
+	reg |= (CHSCCDR_CLK_SEL_LDB_DI0
+		<<MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_OFFSET)
+	      |(CHSCCDR_PODF_DIVIDE_BY_3
+		<<MXC_CCM_CHSCCDR_IPU1_DI0_PODF_OFFSET)
+	      |(CHSCCDR_IPU_PRE_CLK_540M_PFD
+		<<MXC_CCM_CHSCCDR_IPU1_DI0_PRE_CLK_SEL_OFFSET);
+	writel(reg, &mxc_ccm->chsccdr);
+
+	reg = IOMUXC_GPR2_BGREF_RRMODE_EXTERNAL_RES
+	     |IOMUXC_GPR2_DI1_VS_POLARITY_ACTIVE_HIGH
+	     |IOMUXC_GPR2_DI0_VS_POLARITY_ACTIVE_LOW
+	     |IOMUXC_GPR2_BIT_MAPPING_CH1_SPWG
+	     |IOMUXC_GPR2_DATA_WIDTH_CH1_18BIT
+	     |IOMUXC_GPR2_BIT_MAPPING_CH0_SPWG
+	     |IOMUXC_GPR2_DATA_WIDTH_CH0_18BIT
+	     |IOMUXC_GPR2_LVDS_CH1_MODE_DISABLED
+	     |IOMUXC_GPR2_LVDS_CH0_MODE_ENABLED_DI0;
+	writel(reg, &iomux->gpr[2]);
+
+	reg = readl(&iomux->gpr[3]);
+	reg = (reg & ~IOMUXC_GPR3_LVDS0_MUX_CTL_MASK)
+	    | (IOMUXC_GPR3_MUX_SRC_IPU1_DI0
+	       <<IOMUXC_GPR3_LVDS0_MUX_CTL_OFFSET);
+	writel(reg, &iomux->gpr[3]);
+
+	/* backlights off until needed */
+	imx_iomux_v3_setup_multiple_pads(backlight_pads,
+					 ARRAY_SIZE(backlight_pads));
+	gpio_direction_input(LVDS_BACKLIGHT_GP);
+	gpio_direction_input(RGB_BACKLIGHT_GP);
+}
+#endif
+
 int board_early_init_f(void)
 {
 	setup_iomux_uart();
 	setup_buttons();
 
+#if defined(CONFIG_VIDEO_IPUV3)
+	setup_display();
+#endif
 	return 0;
 }
 
+/*
+ * Do not overwrite the console
+ * Use always serial for U-Boot console
+ */
+int overwrite_console(void)
+{
+	return 1;
+}
+
 int board_init(void)
 {
        /* address of boot parameters */

board/freescale/mx6qsabresd/mx6qsabresd.c

@@ -51,12 +51,12 @@ int dram_init(void)
 	return 0;
 }
 
-iomux_v3_cfg_t uart1_pads[] = {
+iomux_v3_cfg_t const uart1_pads[] = {
 	MX6Q_PAD_CSI0_DAT10__UART1_TXD | MUX_PAD_CTRL(UART_PAD_CTRL),
 	MX6Q_PAD_CSI0_DAT11__UART1_RXD | MUX_PAD_CTRL(UART_PAD_CTRL),
 };
 
-iomux_v3_cfg_t enet_pads[] = {
+iomux_v3_cfg_t const enet_pads[] = {
 	MX6Q_PAD_ENET_MDIO__ENET_MDIO		| MUX_PAD_CTRL(ENET_PAD_CTRL),
 	MX6Q_PAD_ENET_MDC__ENET_MDC		| MUX_PAD_CTRL(ENET_PAD_CTRL),
 	MX6Q_PAD_RGMII_TXC__ENET_RGMII_TXC	| MUX_PAD_CTRL(ENET_PAD_CTRL),
@@ -86,7 +86,7 @@ static void setup_iomux_enet(void)
 	gpio_set_value(IMX_GPIO_NR(1, 25), 1);
 }
 
-iomux_v3_cfg_t usdhc3_pads[] = {
+iomux_v3_cfg_t const usdhc3_pads[] = {
 	MX6Q_PAD_SD3_CLK__USDHC3_CLK   | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 	MX6Q_PAD_SD3_CMD__USDHC3_CMD   | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 	MX6Q_PAD_SD3_DAT0__USDHC3_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
@@ -120,6 +120,7 @@ int board_mmc_init(bd_t *bis)
 {
 	imx_iomux_v3_setup_multiple_pads(usdhc3_pads, ARRAY_SIZE(usdhc3_pads));
 
+	usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
 	return fsl_esdhc_initialize(bis, &usdhc_cfg[0]);
 }
 #endif

board/genesi/mx51_efikamx/efikamx.c

@@ -29,6 +29,7 @@
 #include <asm/errno.h>
 #include <asm/arch/sys_proto.h>
 #include <asm/arch/crm_regs.h>
+#include <asm/arch/clock.h>
 #include <i2c.h>
 #include <mmc.h>
 #include <fsl_esdhc.h>
@@ -93,7 +94,7 @@ static u32 get_mx_rev(void)
 	return (~rev & 0x7) + 1;
 }
 
-static iomux_v3_cfg_t efikasb_revision_pads[] = {
+static iomux_v3_cfg_t const efikasb_revision_pads[] = {
 	MX51_PAD_EIM_CS3__GPIO2_28,
 	MX51_PAD_EIM_CS4__GPIO2_29,
 };
@@ -140,7 +141,7 @@ int dram_init(void)
 /*
  * UART configuration
  */
-static iomux_v3_cfg_t efikamx_uart_pads[] = {
+static iomux_v3_cfg_t const efikamx_uart_pads[] = {
 	MX51_PAD_UART1_RXD__UART1_RXD,
 	MX51_PAD_UART1_TXD__UART1_TXD,
 	MX51_PAD_UART1_RTS__UART1_RTS,
@@ -150,7 +151,7 @@ static iomux_v3_cfg_t efikamx_uart_pads[] = {
 /*
  * SPI configuration
  */
-static iomux_v3_cfg_t efikamx_spi_pads[] = {
+static iomux_v3_cfg_t const efikamx_spi_pads[] = {
 	MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI,
 	MX51_PAD_CSPI1_MISO__ECSPI1_MISO,
 	MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK,
@@ -272,7 +273,7 @@ struct fsl_esdhc_cfg esdhc_cfg[2] = {
 	{MMC_SDHC2_BASE_ADDR},
 };
 
-static iomux_v3_cfg_t efikamx_sdhc1_pads[] = {
+static iomux_v3_cfg_t const efikamx_sdhc1_pads[] = {
 	MX51_PAD_SD1_CMD__SD1_CMD,
 	MX51_PAD_SD1_CLK__SD1_CLK,
 	MX51_PAD_SD1_DATA0__SD1_DATA0,
@@ -284,7 +285,7 @@ static iomux_v3_cfg_t efikamx_sdhc1_pads[] = {
 
 #define EFIKAMX_SDHC1_WP	IMX_GPIO_NR(1, 1)
 
-static iomux_v3_cfg_t efikamx_sdhc1_cd_pads[] = {
+static iomux_v3_cfg_t const efikamx_sdhc1_cd_pads[] = {
 	MX51_PAD_GPIO1_0__SD1_CD,
 	MX51_PAD_EIM_CS2__SD1_CD,
 };
@@ -292,7 +293,7 @@ static iomux_v3_cfg_t efikamx_sdhc1_cd_pads[] = {
 #define EFIKAMX_SDHC1_CD	IMX_GPIO_NR(1, 0)
 #define EFIKASB_SDHC1_CD	IMX_GPIO_NR(2, 27)
 
-static iomux_v3_cfg_t efikasb_sdhc2_pads[] = {
+static iomux_v3_cfg_t const efikasb_sdhc2_pads[] = {
 	MX51_PAD_SD2_CMD__SD2_CMD,
 	MX51_PAD_SD2_CLK__SD2_CLK,
 	MX51_PAD_SD2_DATA0__SD2_DATA0,
@@ -349,6 +350,9 @@ int board_mmc_init(bd_t *bis)
 		gpio_direction_input(EFIKASB_SDHC1_CD);
 	}
 
+	esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
+	esdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
+
 	ret = fsl_esdhc_initialize(bis, &esdhc_cfg[0]);
 
 	if (machine_is_efikasb()) {
@@ -368,7 +372,7 @@ int board_mmc_init(bd_t *bis)
 /*
  * PATA
  */
-static iomux_v3_cfg_t efikamx_pata_pads[] = {
+static iomux_v3_cfg_t const efikamx_pata_pads[] = {
 	MX51_PAD_NANDF_WE_B__PATA_DIOW,
 	MX51_PAD_NANDF_RE_B__PATA_DIOR,
 	MX51_PAD_NANDF_ALE__PATA_BUFFER_EN,
@@ -419,7 +423,7 @@ static inline void setup_iomux_usb(void) { }
 #define EFIKAMX_LED_GREEN	IMX_GPIO_NR(3, 14)
 #define EFIKAMX_LED_RED		IMX_GPIO_NR(3, 15)
 
-static iomux_v3_cfg_t efikasb_led_pads[] = {
+static iomux_v3_cfg_t const efikasb_led_pads[] = {
 	MX51_PAD_GPIO1_3__GPIO1_3,
 	MX51_PAD_EIM_CS0__GPIO2_25,
 };

board/nokia/rx51/Makefile

@@ -0,0 +1,46 @@
+#
+# (C) Copyright 2000, 2001, 2002
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).o
+
+COBJS-y	:= $(BOARD).o
+SOBJS-y := lowlevel_init.o
+
+COBJS	:= $(sort $(COBJS-y))
+SOBJS	:= $(sort $(SOBJS-y))
+SRCS	:= $(COBJS:.o=.c) $(SOBJS:.o=.S)
+OBJS	:= $(addprefix $(obj),$(COBJS)) $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(obj).depend $(OBJS)
+	$(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################

board/nokia/rx51/lowlevel_init.S

@@ -0,0 +1,209 @@
+/*
+ * (C) Copyright 2011-2012
+ * Pali Rohár <pali.rohar@gmail.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+
+relocaddr:		/* address of this relocaddr section after coping */
+	.word .		/* address of section (calculated at compile time) */
+
+startaddr:		/* address of u-boot after copying */
+	.word CONFIG_SYS_TEXT_BASE
+
+kernaddr:		/* address of kernel after copying */
+	.word KERNEL_ADDRESS
+
+kernsize:		/* maximal size of kernel image */
+	.word KERNEL_MAXSIZE
+
+kernoffs:		/* offset of kernel image in loaded u-boot */
+	.word KERNEL_OFFSET
+
+imagesize:		/* maximal size of image */
+	.word IMAGE_MAXSIZE
+
+ih_magic:		/* IH_MAGIC in big endian from include/image.h */
+	.word 0x56190527
+
+/*
+ * Routine: save_boot_params (called after reset from start.S)
+ * Description: Copy attached kernel to address KERNEL_ADDRESS
+ *              Copy u-boot to address CONFIG_SYS_TEXT_BASE
+ *              Return to copied u-boot address
+ */
+
+.global save_boot_params
+save_boot_params:
+
+
+/* Copy valid attached kernel to address KERNEL_ADDRESS */
+
+copy_kernel_start:
+	adr	r0, relocaddr	/* r0 - address of section relocaddr */
+	ldr	r1, relocaddr	/* r1 - address of relocaddr after relocation */
+	cmp	r0, r1
+
+	/* r4 - calculated offset */
+	subhi	r4, r0, r1
+	sublo	r4, r1, r0
+
+	/* r0 - start of kernel before */
+	ldr	r0, startaddr
+	addhi	r0, r0, r4
+	sublo	r0, r0, r4
+	ldr	r1, kernoffs
+	add	r0, r0, r1
+
+	/* r3 - start of kernel after */
+	ldr	r3, kernaddr
+
+	/* r2 - end of kernel after */
+	ldr	r1, kernsize
+	add	r2, r3, r1
+
+	/* r1 - end of kernel before */
+	add	r1, r0, r1
+
+	/* remove header in target kernel */
+	mov	r5, #0
+	str	r5, [r3]
+
+	/* check for valid kernel uImage */
+	ldr	r4, [r0]	/* r4 - 4 bytes header of kernel */
+	ldr	r5, ih_magic	/* r5 - IH_MAGIC */
+	cmp	r4, r5
+	bne	copy_kernel_end	/* skip if invalid image */
+
+copy_kernel_loop:
+	ldmdb	r1!, {r3 - r10}
+	stmdb	r2!, {r3 - r10}
+	cmp	r1, r0
+	bhi	copy_kernel_loop
+
+copy_kernel_end:
+	mov	r5, #0
+	str	r5, [r0]	/* remove 4 bytes header of kernel */
+
+
+/* Fix u-boot code */
+
+fix_start:
+	adr	r0, relocaddr	/* r0 - address of section relocaddr */
+	ldr	r1, relocaddr	/* r1 - address of relocaddr after relocation */
+	cmp	r0, r1
+
+	beq	copy_uboot_end	/* skip if u-boot is on correct address */
+
+	/* r5 - calculated offset */
+	subhi	r5, r0, r1
+	sublo	r5, r1, r0
+
+	/* r6 - maximal u-boot size */
+	ldr	r6, imagesize
+
+	/* fix return address */
+	subhi	lr, lr, r5
+	addlo	lr, lr, r5
+
+	/* r1 - start of u-boot after */
+	ldr	r1, startaddr
+
+	/* r0 - start of u-boot before */
+	addhi	r0, r1, r5
+	sublo	r0, r1, r5
+
+	/* check if we need to move uboot copy code before calling it */
+	cmp	r5, r6
+	bhi	copy_uboot_start /* now coping u-boot code directly is safe */
+
+
+copy_code_start:
+	/* r0 - start of u-boot before */
+	/* r1 - start of u-boot after */
+	/* r6 - maximal u-boot size */
+
+	/* r7 - maximal kernel size */
+	ldr	r7, kernsize
+
+	/* r4 - end of kernel before */
+	add	r4, r0, r6
+	add	r4, r4, r7
+
+	/* r5 - end of u-boot after */
+	ldr	r5, startaddr
+	add	r5, r5, r6
+
+	/* r2 - start of loop code after */
+	cmp	r4, r5		/* higher address (r4 or r5) */
+	movhs	r2, r4
+	movlo	r2, r5
+
+	/* r3 - end of loop code before */
+	adr	r3, end
+
+	/* r4 - end of loop code after */
+	adr	r4, copy_uboot_start
+	sub	r4, r3, r4
+	add	r4, r2, r4
+
+copy_code_loop:
+	ldmdb	r3!, {r7 - r10}
+	stmdb	r4!, {r7 - r10}
+	cmp	r4, r2
+	bhi	copy_code_loop
+
+copy_code_end:
+	mov	pc, r2
+
+
+/* Copy u-boot to address CONFIG_SYS_TEXT_BASE */
+
+copy_uboot_start:
+	/* r0 - start of u-boot before */
+	/* r1 - start of u-boot after */
+	/* r6 - maximal u-boot size */
+
+	/* r2 - end of u-boot after */
+	add	r2, r1, r6
+
+	/* condition for copying from left to right */
+	cmp	r0, r1
+	addlo	r1, r0, r6	/* r1 - end of u-boot before */
+	blo	copy_uboot_loop_right
+
+copy_uboot_loop_left:
+	ldmia	r0!, {r3 - r10}
+	stmia	r1!, {r3 - r10}
+	cmp	r1, r2
+	blo	copy_uboot_loop_left
+	b	copy_uboot_end
+
+copy_uboot_loop_right:
+	ldmdb	r1!, {r3 - r10}
+	stmdb	r2!, {r3 - r10}
+	cmp	r1, r0
+	bhi	copy_uboot_loop_right
+
+copy_uboot_end:
+	bx	lr
+
+end:

board/nokia/rx51/rx51.c

@@ -0,0 +1,677 @@
+/*
+ * (C) Copyright 2012
+ * Ивайло Димитров <freemangordon@abv.bg>
+ *
+ * (C) Copyright 2011-2012
+ * Pali Rohár <pali.rohar@gmail.com>
+ *
+ * (C) Copyright 2010
+ * Alistair Buxton <a.j.buxton@gmail.com>
+ *
+ * Derived from Beagle Board and 3430 SDP code:
+ * (C) Copyright 2004-2008
+ * Texas Instruments, <www.ti.com>
+ *
+ * Author :
+ *	Sunil Kumar <sunilsaini05@gmail.com>
+ *	Shashi Ranjan <shashiranjanmca05@gmail.com>
+ *
+ *	Richard Woodruff <r-woodruff2@ti.com>
+ *	Syed Mohammed Khasim <khasim@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <watchdog.h>
+#include <malloc.h>
+#include <twl4030.h>
+#include <i2c.h>
+#include <video_fb.h>
+#include <asm/io.h>
+#include <asm/setup.h>
+#include <asm/bitops.h>
+#include <asm/mach-types.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/mmc_host_def.h>
+
+#include "rx51.h"
+#include "tag_omap.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+GraphicDevice gdev;
+
+const omap3_sysinfo sysinfo = {
+	DDR_STACKED,
+	"Nokia RX-51",
+	"OneNAND"
+};
+
+/* This structure contains default omap tags needed for booting Maemo 5 */
+static struct tag_omap omap[] = {
+	OMAP_TAG_UART_CONFIG(0x04),
+	OMAP_TAG_SERIAL_CONSOLE_CONFIG(0x03, 0x01C200),
+	OMAP_TAG_LCD_CONFIG("acx565akm", "internal", 90, 0x18),
+	OMAP_TAG_GPIO_SWITCH_CONFIG("cam_focus", 0x44, 0x1, 0x2, 0x0),
+	OMAP_TAG_GPIO_SWITCH_CONFIG("cam_launch", 0x45, 0x1, 0x2, 0x0),
+	OMAP_TAG_GPIO_SWITCH_CONFIG("cam_shutter", 0x6e, 0x1, 0x0, 0x0),
+	OMAP_TAG_GPIO_SWITCH_CONFIG("cmt_apeslpx", 0x46, 0x2, 0x2, 0x0),
+	OMAP_TAG_GPIO_SWITCH_CONFIG("cmt_bsi", 0x9d, 0x2, 0x2, 0x0),
+	OMAP_TAG_GPIO_SWITCH_CONFIG("cmt_en", 0x4a, 0x2, 0x2, 0x0),
+	OMAP_TAG_GPIO_SWITCH_CONFIG("cmt_rst", 0x4b, 0x6, 0x2, 0x0),
+	OMAP_TAG_GPIO_SWITCH_CONFIG("cmt_rst_rq", 0x49, 0x6, 0x2, 0x0),
+	OMAP_TAG_GPIO_SWITCH_CONFIG("cmt_wddis", 0x0d, 0x2, 0x2, 0x0),
+	OMAP_TAG_GPIO_SWITCH_CONFIG("headphone", 0xb1, 0x1, 0x1, 0x0),
+	OMAP_TAG_GPIO_SWITCH_CONFIG("kb_lock", 0x71, 0x1, 0x0, 0x0),
+	OMAP_TAG_GPIO_SWITCH_CONFIG("proximity", 0x59, 0x0, 0x0, 0x0),
+	OMAP_TAG_GPIO_SWITCH_CONFIG("sleep_ind", 0xa2, 0x2, 0x2, 0x0),
+	OMAP_TAG_GPIO_SWITCH_CONFIG("slide", GPIO_SLIDE, 0x0, 0x0, 0x0),
+	OMAP_TAG_WLAN_CX3110X_CONFIG(0x25, 0xff, 87, 42, -1),
+	OMAP_TAG_PARTITION_CONFIG(PART1_NAME, PART1_SIZE * PART1_MULL,
+			PART1_OFFS, PART1_MASK),
+	OMAP_TAG_PARTITION_CONFIG(PART2_NAME, PART2_SIZE * PART2_MULL,
+			PART2_OFFS, PART2_MASK),
+	OMAP_TAG_PARTITION_CONFIG(PART3_NAME, PART3_SIZE * PART3_MULL,
+			PART3_OFFS, PART3_MASK),
+	OMAP_TAG_PARTITION_CONFIG(PART4_NAME, PART4_SIZE * PART4_MULL,
+			PART4_OFFS, PART4_MASK),
+	OMAP_TAG_PARTITION_CONFIG(PART5_NAME, PART5_SIZE * PART5_MULL,
+			PART5_OFFS, PART5_MASK),
+	OMAP_TAG_PARTITION_CONFIG(PART6_NAME, PART6_SIZE * PART6_MULL,
+			PART6_OFFS, PART6_MASK),
+	OMAP_TAG_BOOT_REASON_CONFIG("pwr_key"),
+	OMAP_TAG_VERSION_STR_CONFIG("product", "RX-51"),
+	OMAP_TAG_VERSION_STR_CONFIG("hw-build", "2101"),
+	OMAP_TAG_VERSION_STR_CONFIG("nolo", "1.4.14"),
+	OMAP_TAG_VERSION_STR_CONFIG("boot-mode", "normal"),
+	{ }
+};
+
+static char *boot_reason_ptr;
+static char *hw_build_ptr;
+static char *nolo_version_ptr;
+static char *boot_mode_ptr;
+
+/*
+ * Routine: init_omap_tags
+ * Description: Initialize pointers to values in tag_omap
+ */
+static void init_omap_tags(void)
+{
+	char *component;
+	char *version;
+	int i = 0;
+	while (omap[i].hdr.tag) {
+		switch (omap[i].hdr.tag) {
+		case OMAP_TAG_BOOT_REASON:
+			boot_reason_ptr = omap[i].u.boot_reason.reason_str;
+			break;
+		case OMAP_TAG_VERSION_STR:
+			component = omap[i].u.version.component;
+			version = omap[i].u.version.version;
+			if (strcmp(component, "hw-build") == 0)
+				hw_build_ptr = version;
+			else if (strcmp(component, "nolo") == 0)
+				nolo_version_ptr = version;
+			else if (strcmp(component, "boot-mode") == 0)
+				boot_mode_ptr = version;
+			break;
+		default:
+			break;
+		}
+		i++;
+	}
+}
+
+static void reuse_omap_atags(struct tag_omap *t)
+{
+	char *component;
+	char *version;
+	while (t->hdr.tag) {
+		switch (t->hdr.tag) {
+		case OMAP_TAG_BOOT_REASON:
+			memset(boot_reason_ptr, 0, 12);
+			strcpy(boot_reason_ptr, t->u.boot_reason.reason_str);
+			break;
+		case OMAP_TAG_VERSION_STR:
+			component = t->u.version.component;
+			version = t->u.version.version;
+			if (strcmp(component, "hw-build") == 0) {
+				memset(hw_build_ptr, 0, 12);
+				strcpy(hw_build_ptr, version);
+			} else if (strcmp(component, "nolo") == 0) {
+				memset(nolo_version_ptr, 0, 12);
+				strcpy(nolo_version_ptr, version);
+			} else if (strcmp(component, "boot-mode") == 0) {
+				memset(boot_mode_ptr, 0, 12);
+				strcpy(boot_mode_ptr, version);
+			}
+			break;
+		default:
+			break;
+		}
+		t = tag_omap_next(t);
+	}
+}
+
+/*
+ * Routine: reuse_atags
+ * Description: Reuse atags from previous bootloader.
+ *              Reuse only only HW build, boot reason, boot mode and nolo
+ */
+static void reuse_atags(void)
+{
+	struct tag *t = (struct tag *)gd->bd->bi_boot_params;
+
+	/* First tag must be ATAG_CORE */
+	if (t->hdr.tag != ATAG_CORE)
+		return;
+
+	if (!boot_reason_ptr || !hw_build_ptr)
+		return;
+
+	/* Last tag must be ATAG_NONE */
+	while (t->hdr.tag != ATAG_NONE) {
+		switch (t->hdr.tag) {
+		case ATAG_REVISION:
+			memset(hw_build_ptr, 0, 12);
+			sprintf(hw_build_ptr, "%x", t->u.revision.rev);
+			break;
+		case ATAG_BOARD:
+			reuse_omap_atags((struct tag_omap *)&t->u);
+			break;
+		default:
+			break;
+		}
+		t = tag_next(t);
+	}
+}
+
+/*
+ * Routine: board_init
+ * Description: Early hardware init.
+ */
+int board_init(void)
+{
+	/* in SRAM or SDRAM, finish GPMC */
+	gpmc_init();
+	/* boot param addr */
+	gd->bd->bi_boot_params = OMAP34XX_SDRC_CS0 + 0x100;
+	return 0;
+}
+
+/*
+ * Routine: get_board_revision
+ * Description: Return board revision.
+ */
+u32 get_board_rev(void)
+{
+	return simple_strtol(hw_build_ptr, NULL, 16);
+}
+
+/*
+ * Routine: setup_board_tags
+ * Description: Append board specific boot tags.
+ */
+void setup_board_tags(struct tag **in_params)
+{
+	int setup_console_atag;
+	char *setup_boot_reason_atag;
+	char *setup_boot_mode_atag;
+	char *str;
+	int i;
+	int size;
+	int total_size;
+	struct tag *params;
+	struct tag_omap *t;
+
+	params = (struct tag *)gd->bd->bi_boot_params;
+
+	params->u.core.flags = 0x0;
+	params->u.core.pagesize = 0x1000;
+	params->u.core.rootdev = 0x0;
+
+	/* append omap atag only if env setup_omap_atag is set to 1 */
+	str = getenv("setup_omap_atag");
+	if (!str || str[0] != '1')
+		return;
+
+	str = getenv("setup_console_atag");
+	if (str && str[0] == '1')
+		setup_console_atag = 1;
+	else
+		setup_console_atag = 0;
+
+	setup_boot_reason_atag = getenv("setup_boot_reason_atag");
+	setup_boot_mode_atag = getenv("setup_boot_mode_atag");
+
+	params = *in_params;
+	t = (struct tag_omap *)&params->u;
+	total_size = sizeof(struct tag_header);
+
+	for (i = 0; omap[i].hdr.tag; i++) {
+
+		/* skip serial console tag */
+		if (!setup_console_atag &&
+			omap[i].hdr.tag == OMAP_TAG_SERIAL_CONSOLE)
+			continue;
+
+		size = omap[i].hdr.size + sizeof(struct tag_omap_header);
+		memcpy(t, &omap[i], size);
+
+		/* set uart tag to 0 - disable serial console */
+		if (!setup_console_atag && omap[i].hdr.tag == OMAP_TAG_UART)
+			t->u.uart.enabled_uarts = 0;
+
+		/* change boot reason */
+		if (setup_boot_reason_atag &&
+			omap[i].hdr.tag == OMAP_TAG_BOOT_REASON) {
+			memset(t->u.boot_reason.reason_str, 0, 12);
+			strcpy(t->u.boot_reason.reason_str,
+				setup_boot_reason_atag);
+		}
+
+		/* change boot mode */
+		if (setup_boot_mode_atag &&
+			omap[i].hdr.tag == OMAP_TAG_VERSION_STR &&
+			strcmp(omap[i].u.version.component, "boot-mode") == 0) {
+			memset(t->u.version.version, 0, 12);
+			strcpy(t->u.version.version, setup_boot_mode_atag);
+		}
+
+		total_size += size;
+		t = tag_omap_next(t);
+
+	}
+
+	params->hdr.tag = ATAG_BOARD;
+	params->hdr.size = total_size >> 2;
+	params = tag_next(params);
+
+	*in_params = params;
+}
+
+/*
+ * Routine: video_hw_init
+ * Description: Set up the GraphicDevice depending on sys_boot.
+ */
+void *video_hw_init(void)
+{
+	/* fill in Graphic Device */
+	gdev.frameAdrs = 0x8f9c0000;
+	gdev.winSizeX = 800;
+	gdev.winSizeY = 480;
+	gdev.gdfBytesPP = 2;
+	gdev.gdfIndex = GDF_16BIT_565RGB;
+	memset((void *)gdev.frameAdrs, 0, 0xbb800);
+	return (void *) &gdev;
+}
+
+/*
+ * Routine: twl4030_regulator_set_mode
+ * Description: Set twl4030 regulator mode over i2c powerbus.
+ */
+static void twl4030_regulator_set_mode(u8 id, u8 mode)
+{
+	u16 msg = MSG_SINGULAR(DEV_GRP_P1, id, mode);
+	twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER, msg >> 8,
+			TWL4030_PM_MASTER_PB_WORD_MSB);
+	twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER, msg & 0xff,
+			TWL4030_PM_MASTER_PB_WORD_LSB);
+}
+
+static void omap3_emu_romcode_call(u32 service_id, u32 *parameters)
+{
+	u32 i, num_params = *parameters;
+	u32 *sram_scratch_space = (u32 *)OMAP3_PUBLIC_SRAM_SCRATCH_AREA;
+
+	/*
+	 * copy the parameters to an un-cached area to avoid coherency
+	 * issues
+	 */
+	for (i = 0; i < num_params; i++) {
+		__raw_writel(*parameters, sram_scratch_space);
+		parameters++;
+		sram_scratch_space++;
+	}
+
+	/* Now make the PPA call */
+	do_omap3_emu_romcode_call(service_id, OMAP3_PUBLIC_SRAM_SCRATCH_AREA);
+}
+
+/*
+ * Routine: omap3_update_aux_cr_secure_rx51
+ * Description: Modify the contents Auxiliary Control Register.
+ * Parameters:
+ *   set_bits - bits to set in ACR
+ *   clr_bits - bits to clear in ACR
+ */
+static void omap3_update_aux_cr_secure_rx51(u32 set_bits, u32 clear_bits)
+{
+	struct emu_hal_params_rx51 emu_romcode_params = { 0, };
+	u32 acr;
+
+	/* Read ACR */
+	asm volatile ("mrc p15, 0, %0, c1, c0, 1" : "=r" (acr));
+	acr &= ~clear_bits;
+	acr |= set_bits;
+
+	emu_romcode_params.num_params = 2;
+	emu_romcode_params.param1 = acr;
+
+	omap3_emu_romcode_call(OMAP3_EMU_HAL_API_WRITE_ACR,
+				(u32 *)&emu_romcode_params);
+}
+
+/*
+ * Routine: misc_init_r
+ * Description: Configure board specific parts.
+ */
+int misc_init_r(void)
+{
+	char buf[12];
+	u8 state;
+
+	/* reset lp5523 led */
+	i2c_set_bus_num(1);
+	state = 0xff;
+	i2c_write(0x32, 0x3d, 1, &state, 1);
+	i2c_set_bus_num(0);
+
+	/* initialize twl4030 power managment */
+	twl4030_power_init();
+
+	/* set VSIM to 1.8V */
+	twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VSIM_DEDICATED,
+				TWL4030_PM_RECEIVER_VSIM_VSEL_18,
+				TWL4030_PM_RECEIVER_VSIM_DEV_GRP,
+				TWL4030_PM_RECEIVER_DEV_GRP_P1);
+
+	/* store I2C access state */
+	twl4030_i2c_read_u8(TWL4030_CHIP_PM_MASTER, &state,
+			TWL4030_PM_MASTER_PB_CFG);
+
+	/* enable I2C access to powerbus (needed for twl4030 regulator) */
+	twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER, 0x02,
+			TWL4030_PM_MASTER_PB_CFG);
+
+	/* set VAUX3, VSIM and VMMC1 state to active - enable eMMC memory */
+	twl4030_regulator_set_mode(RES_VAUX3, RES_STATE_ACTIVE);
+	twl4030_regulator_set_mode(RES_VSIM, RES_STATE_ACTIVE);
+	twl4030_regulator_set_mode(RES_VMMC1, RES_STATE_ACTIVE);
+
+	/* restore I2C access state */
+	twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER, state,
+			TWL4030_PM_MASTER_PB_CFG);
+
+	/* set env variable attkernaddr for relocated kernel */
+	sprintf(buf, "%#x", KERNEL_ADDRESS);
+	setenv("attkernaddr", buf);
+
+	/* initialize omap tags */
+	init_omap_tags();
+
+	/* reuse atags from previous bootloader */
+	reuse_atags();
+
+	dieid_num_r();
+	print_cpuinfo();
+
+	/*
+	 * Cortex-A8(r1p0..r1p2) errata 430973 workaround
+	 * Set IBE bit in Auxiliary Control Register
+	 */
+	omap3_update_aux_cr_secure_rx51(1 << 6, 0);
+
+	return 0;
+}
+
+/*
+ * Routine: set_muxconf_regs
+ * Description: Setting up the configuration Mux registers specific to the
+ *		hardware. Many pins need to be moved from protect to primary
+ *		mode.
+ */
+void set_muxconf_regs(void)
+{
+	MUX_RX51();
+}
+
+static unsigned long int twl_wd_time; /* last time of watchdog reset */
+static unsigned long int twl_i2c_lock;
+
+/*
+ * Routine: hw_watchdog_reset
+ * Description: Reset timeout of twl4030 watchdog.
+ */
+void hw_watchdog_reset(void)
+{
+	u8 timeout = 0;
+
+	/* do not reset watchdog too often - max every 4s */
+	if (get_timer(twl_wd_time) < 4 * CONFIG_SYS_HZ)
+		return;
+
+	/* localy lock twl4030 i2c bus */
+	if (test_and_set_bit(0, &twl_i2c_lock))
+		return;
+
+	/* read actual watchdog timeout */
+	twl4030_i2c_read_u8(TWL4030_CHIP_PM_RECEIVER, &timeout,
+			TWL4030_PM_RECEIVER_WATCHDOG_CFG);
+
+	/* timeout 0 means watchdog is disabled */
+	/* reset watchdog timeout to 31s (maximum) */
+	if (timeout != 0)
+		twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, 31,
+				TWL4030_PM_RECEIVER_WATCHDOG_CFG);
+
+	/* store last watchdog reset time */
+	twl_wd_time = get_timer(0);
+
+	/* localy unlock twl4030 i2c bus */
+	test_and_clear_bit(0, &twl_i2c_lock);
+}
+
+/*
+ * TWL4030 keypad handler for cfb_console
+ */
+
+static const char keymap[] = {
+	/* normal */
+	'q',  'o',  'p',  ',', '\b',    0,  'a',  's',
+	'w',  'd',  'f',  'g',  'h',  'j',  'k',  'l',
+	'e',  '.',    0,  '\r',   0,  'z',  'x',  'c',
+	'r',  'v',  'b',  'n',  'm',  ' ',  ' ',    0,
+	't',    0,    0,    0,    0,    0,    0,    0,
+	'y',    0,    0,    0,    0,    0,    0,    0,
+	'u',    0,    0,    0,    0,    0,    0,    0,
+	'i',    5,    6,    0,    0,    0,    0,    0,
+	/* fn */
+	'1',  '9',  '0',  '=', '\b',    0,  '*',  '+',
+	'2',  '#',  '-',  '_',  '(',  ')',  '&',  '!',
+	'3',  '?',  '^', '\r',    0,  156,  '$',  238,
+	'4',  '/', '\\',  '"', '\'',  '@',    0,  '<',
+	'5',  '|',  '>',    0,    0,    0,    0,    0,
+	'6',    0,    0,    0,    0,    0,    0,    0,
+	'7',    0,    0,    0,    0,    0,    0,    0,
+	'8',   16,   17,    0,    0,    0,    0,    0,
+};
+
+static u8 keys[8];
+static u8 old_keys[8] = {0, 0, 0, 0, 0, 0, 0, 0};
+#define KEYBUF_SIZE 32
+static u8 keybuf[KEYBUF_SIZE];
+static u8 keybuf_head;
+static u8 keybuf_tail;
+
+/*
+ * Routine: rx51_kp_init
+ * Description: Initialize HW keyboard.
+ */
+int rx51_kp_init(void)
+{
+	int ret = 0;
+	u8 ctrl;
+	ret = twl4030_i2c_read_u8(TWL4030_CHIP_KEYPAD, &ctrl,
+		TWL4030_KEYPAD_KEYP_CTRL_REG);
+
+	if (ret)
+		return ret;
+
+	/* turn on keyboard and use hardware scanning */
+	ctrl |= TWL4030_KEYPAD_CTRL_KBD_ON;
+	ctrl |= TWL4030_KEYPAD_CTRL_SOFT_NRST;
+	ctrl |= TWL4030_KEYPAD_CTRL_SOFTMODEN;
+	ret |= twl4030_i2c_write_u8(TWL4030_CHIP_KEYPAD, ctrl,
+				TWL4030_KEYPAD_KEYP_CTRL_REG);
+	/* enable key event status */
+	ret |= twl4030_i2c_write_u8(TWL4030_CHIP_KEYPAD, 0xfe,
+				TWL4030_KEYPAD_KEYP_IMR1);
+	/* enable interrupt generation on rising and falling */
+	/* this is a workaround for qemu twl4030 emulation */
+	ret |= twl4030_i2c_write_u8(TWL4030_CHIP_KEYPAD, 0x57,
+				TWL4030_KEYPAD_KEYP_EDR);
+	/* enable ISR clear on read */
+	ret |= twl4030_i2c_write_u8(TWL4030_CHIP_KEYPAD, 0x05,
+				TWL4030_KEYPAD_KEYP_SIH_CTRL);
+	return 0;
+}
+
+static void rx51_kp_fill(u8 k, u8 mods)
+{
+	/* check if some cursor key without meta fn key was pressed */
+	if (!(mods & 2) && (k == 18 || k == 31 || k == 33 || k == 34)) {
+		keybuf[keybuf_tail++] = '\e';
+		keybuf_tail %= KEYBUF_SIZE;
+		keybuf[keybuf_tail++] = '[';
+		keybuf_tail %= KEYBUF_SIZE;
+		if (k == 18) /* up */
+			keybuf[keybuf_tail++] = 'A';
+		else if (k == 31) /* left */
+			keybuf[keybuf_tail++] = 'D';
+		else if (k == 33) /* down */
+			keybuf[keybuf_tail++] = 'B';
+		else if (k == 34) /* right */
+			keybuf[keybuf_tail++] = 'C';
+		keybuf_tail %= KEYBUF_SIZE;
+		return;
+	}
+
+	if (mods & 2) { /* fn meta key was pressed */
+		k = keymap[k+64];
+	} else {
+		k = keymap[k];
+		if (mods & 1) { /* ctrl key was pressed */
+			if (k >= 'a' && k <= 'z')
+				k -= 'a' - 1;
+		}
+		if (mods & 4) { /* shift key was pressed */
+			if (k >= 'a' && k <= 'z')
+				k += 'A' - 'a';
+			else if (k == '.')
+				k = ':';
+			else if (k == ',')
+				k = ';';
+		}
+	}
+	keybuf[keybuf_tail++] = k;
+	keybuf_tail %= KEYBUF_SIZE;
+}
+
+/*
+ * Routine: rx51_kp_tstc
+ * Description: Test if key was pressed (from buffer).
+ */
+int rx51_kp_tstc(void)
+{
+	u8 c, r, dk, i;
+	u8 intr;
+	u8 mods;
+
+	/* localy lock twl4030 i2c bus */
+	if (test_and_set_bit(0, &twl_i2c_lock))
+		return 0;
+
+	/* twl4030 remembers up to 2 events */
+	for (i = 0; i < 2; i++) {
+
+		/* check interrupt register for events */
+		twl4030_i2c_read_u8(TWL4030_CHIP_KEYPAD, &intr,
+				TWL4030_KEYPAD_KEYP_ISR1+(2*i));
+
+		/* no event */
+		if (!(intr&1))
+			continue;
+
+		/* read the key state */
+		i2c_read(TWL4030_CHIP_KEYPAD,
+			TWL4030_KEYPAD_FULL_CODE_7_0, 1, keys, 8);
+
+		/* cut out modifier keys from the keystate */
+		mods = keys[4] >> 4;
+		keys[4] &= 0x0f;
+
+		for (c = 0; c < 8; c++) {
+
+			/* get newly pressed keys only */
+			dk = ((keys[c] ^ old_keys[c])&keys[c]);
+			old_keys[c] = keys[c];
+
+			/* fill the keybuf */
+			for (r = 0; r < 8; r++) {
+				if (dk&1)
+					rx51_kp_fill((c*8)+r, mods);
+				dk = dk >> 1;
+			}
+
+		}
+
+	}
+
+	/* localy unlock twl4030 i2c bus */
+	test_and_clear_bit(0, &twl_i2c_lock);
+
+	return (KEYBUF_SIZE + keybuf_tail - keybuf_head)%KEYBUF_SIZE;
+}
+
+/*
+ * Routine: rx51_kp_getc
+ * Description: Get last pressed key (from buffer).
+ */
+int rx51_kp_getc(void)
+{
+	keybuf_head %= KEYBUF_SIZE;
+	while (!rx51_kp_tstc())
+		WATCHDOG_RESET();
+	return keybuf[keybuf_head++];
+}
+
+/*
+ * Routine: board_mmc_init
+ * Description: Initialize mmc devices.
+ */
+int board_mmc_init(bd_t *bis)
+{
+	omap_mmc_init(0, 0, 0);
+	omap_mmc_init(1, 0, 0);
+	return 0;
+}

board/nokia/rx51/rx51.h

@@ -0,0 +1,389 @@
+/*
+ * (C) Copyright 2012
+ * Ивайло Димитров <freemangordon@abv.bg>
+ *
+ * (C) Copyright 2011-2012
+ * Pali Rohár <pali.rohar@gmail.com>
+ *
+ * (C) Copyright 2008
+ * Dirk Behme <dirk.behme@gmail.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef _RX51_H_
+#define _RX51_H_
+
+/* Needed for ROM SMC call */
+struct emu_hal_params_rx51 {
+	u32 num_params;
+	u32 param1;
+	u32 param2;
+	u32 param3;
+	u32 param4;
+};
+
+int print_cpuinfo(void);
+
+/*
+ * IEN  - Input Enable
+ * IDIS - Input Disable
+ * PTD  - Pull type Down
+ * PTU  - Pull type Up
+ * DIS  - Pull type selection is inactive
+ * EN   - Pull type selection is active
+ * M0   - Mode 0
+ * The commented string gives the final mux configuration for that pin
+ */
+#define MUX_RX51() \
+/* SDRC */\
+	MUX_VAL(CP(SDRC_D0),		(IEN  | PTD | DIS | M0)) /*SDRC_D0*/\
+	MUX_VAL(CP(SDRC_D1),		(IEN  | PTD | DIS | M0)) /*SDRC_D1*/\
+	MUX_VAL(CP(SDRC_D2),		(IEN  | PTD | DIS | M0)) /*SDRC_D2*/\
+	MUX_VAL(CP(SDRC_D3),		(IEN  | PTD | DIS | M0)) /*SDRC_D3*/\
+	MUX_VAL(CP(SDRC_D4),		(IEN  | PTD | DIS | M0)) /*SDRC_D4*/\
+	MUX_VAL(CP(SDRC_D5),		(IEN  | PTD | DIS | M0)) /*SDRC_D5*/\
+	MUX_VAL(CP(SDRC_D6),		(IEN  | PTD | DIS | M0)) /*SDRC_D6*/\
+	MUX_VAL(CP(SDRC_D7),		(IEN  | PTD | DIS | M0)) /*SDRC_D7*/\
+	MUX_VAL(CP(SDRC_D8),		(IEN  | PTD | DIS | M0)) /*SDRC_D8*/\
+	MUX_VAL(CP(SDRC_D9),		(IEN  | PTD | DIS | M0)) /*SDRC_D9*/\
+	MUX_VAL(CP(SDRC_D10),		(IEN  | PTD | DIS | M0)) /*SDRC_D10*/\
+	MUX_VAL(CP(SDRC_D11),		(IEN  | PTD | DIS | M0)) /*SDRC_D11*/\
+	MUX_VAL(CP(SDRC_D12),		(IEN  | PTD | DIS | M0)) /*SDRC_D12*/\
+	MUX_VAL(CP(SDRC_D13),		(IEN  | PTD | DIS | M0)) /*SDRC_D13*/\
+	MUX_VAL(CP(SDRC_D14),		(IEN  | PTD | DIS | M0)) /*SDRC_D14*/\
+	MUX_VAL(CP(SDRC_D15),		(IEN  | PTD | DIS | M0)) /*SDRC_D15*/\
+	MUX_VAL(CP(SDRC_D16),		(IEN  | PTD | DIS | M0)) /*SDRC_D16*/\
+	MUX_VAL(CP(SDRC_D17),		(IEN  | PTD | DIS | M0)) /*SDRC_D17*/\
+	MUX_VAL(CP(SDRC_D18),		(IEN  | PTD | DIS | M0)) /*SDRC_D18*/\
+	MUX_VAL(CP(SDRC_D19),		(IEN  | PTD | DIS | M0)) /*SDRC_D19*/\
+	MUX_VAL(CP(SDRC_D20),		(IEN  | PTD | DIS | M0)) /*SDRC_D20*/\
+	MUX_VAL(CP(SDRC_D21),		(IEN  | PTD | DIS | M0)) /*SDRC_D21*/\
+	MUX_VAL(CP(SDRC_D22),		(IEN  | PTD | DIS | M0)) /*SDRC_D22*/\
+	MUX_VAL(CP(SDRC_D23),		(IEN  | PTD | DIS | M0)) /*SDRC_D23*/\
+	MUX_VAL(CP(SDRC_D24),		(IEN  | PTD | DIS | M0)) /*SDRC_D24*/\
+	MUX_VAL(CP(SDRC_D25),		(IEN  | PTD | DIS | M0)) /*SDRC_D25*/\
+	MUX_VAL(CP(SDRC_D26),		(IEN  | PTD | DIS | M0)) /*SDRC_D26*/\
+	MUX_VAL(CP(SDRC_D27),		(IEN  | PTD | DIS | M0)) /*SDRC_D27*/\
+	MUX_VAL(CP(SDRC_D28),		(IEN  | PTD | DIS | M0)) /*SDRC_D28*/\
+	MUX_VAL(CP(SDRC_D29),		(IEN  | PTD | DIS | M0)) /*SDRC_D29*/\
+	MUX_VAL(CP(SDRC_D30),		(IEN  | PTD | DIS | M0)) /*SDRC_D30*/\
+	MUX_VAL(CP(SDRC_D31),		(IEN  | PTD | DIS | M0)) /*SDRC_D31*/\
+	MUX_VAL(CP(SDRC_CLK),		(IEN  | PTD | DIS | M0)) /*SDRC_CLK*/\
+	MUX_VAL(CP(SDRC_DQS0),		(IEN  | PTD | DIS | M0)) /*SDRC_DQS0*/\
+	MUX_VAL(CP(SDRC_DQS1),		(IEN  | PTD | DIS | M0)) /*SDRC_DQS1*/\
+	MUX_VAL(CP(SDRC_DQS2),		(IEN  | PTD | DIS | M0)) /*SDRC_DQS2*/\
+	MUX_VAL(CP(SDRC_DQS3),		(IEN  | PTD | DIS | M0)) /*SDRC_DQS3*/\
+/* GPMC */\
+	MUX_VAL(CP(GPMC_A1),		(IDIS | PTD | DIS | M0)) /*GPMC_A1*/\
+	MUX_VAL(CP(GPMC_A2),		(IDIS | PTD | DIS | M0)) /*GPMC_A2*/\
+	MUX_VAL(CP(GPMC_A3),		(IDIS | PTD | DIS | M0)) /*GPMC_A3*/\
+	MUX_VAL(CP(GPMC_A4),		(IDIS | PTD | DIS | M0)) /*GPMC_A4*/\
+	MUX_VAL(CP(GPMC_A5),		(IDIS | PTD | DIS | M0)) /*GPMC_A5*/\
+	MUX_VAL(CP(GPMC_A6),		(IDIS | PTD | DIS | M0)) /*GPMC_A6*/\
+	MUX_VAL(CP(GPMC_A7),		(IDIS | PTD | DIS | M0)) /*GPMC_A7*/\
+	MUX_VAL(CP(GPMC_A8),		(IDIS | PTD | DIS | M0)) /*GPMC_A8*/\
+	MUX_VAL(CP(GPMC_A9),		(IDIS | PTD | DIS | M0)) /*GPMC_A9*/\
+	MUX_VAL(CP(GPMC_A10),		(IDIS | PTD | DIS | M0)) /*GPMC_A10*/\
+	MUX_VAL(CP(GPMC_D0),		(IEN  | PTD | DIS | M0)) /*GPMC_D0*/\
+	MUX_VAL(CP(GPMC_D1),		(IEN  | PTD | DIS | M0)) /*GPMC_D1*/\
+	MUX_VAL(CP(GPMC_D2),		(IEN  | PTD | DIS | M0)) /*GPMC_D2*/\
+	MUX_VAL(CP(GPMC_D3),		(IEN  | PTD | DIS | M0)) /*GPMC_D3*/\
+	MUX_VAL(CP(GPMC_D4),		(IEN  | PTD | DIS | M0)) /*GPMC_D4*/\
+	MUX_VAL(CP(GPMC_D5),		(IEN  | PTD | DIS | M0)) /*GPMC_D5*/\
+	MUX_VAL(CP(GPMC_D6),		(IEN  | PTD | DIS | M0)) /*GPMC_D6*/\
+	MUX_VAL(CP(GPMC_D7),		(IEN  | PTD | DIS | M0)) /*GPMC_D7*/\
+	MUX_VAL(CP(GPMC_D8),		(IEN  | PTD | DIS | M0)) /*GPMC_D8*/\
+	MUX_VAL(CP(GPMC_D9),		(IEN  | PTD | DIS | M0)) /*GPMC_D9*/\
+	MUX_VAL(CP(GPMC_D10),		(IEN  | PTD | DIS | M0)) /*GPMC_D10*/\
+	MUX_VAL(CP(GPMC_D11),		(IEN  | PTD | DIS | M0)) /*GPMC_D11*/\
+	MUX_VAL(CP(GPMC_D12),		(IEN  | PTD | DIS | M0)) /*GPMC_D12*/\
+	MUX_VAL(CP(GPMC_D13),		(IEN  | PTD | DIS | M0)) /*GPMC_D13*/\
+	MUX_VAL(CP(GPMC_D14),		(IEN  | PTD | DIS | M0)) /*GPMC_D14*/\
+	MUX_VAL(CP(GPMC_D15),		(IEN  | PTD | DIS | M0)) /*GPMC_D15*/\
+	MUX_VAL(CP(GPMC_NCS0),		(IDIS | PTU | EN  | M0)) /*GPMC_nCS0*/\
+	MUX_VAL(CP(GPMC_NCS1),		(IDIS | PTU | EN  | M0)) /*GPMC_nCS1*/\
+	MUX_VAL(CP(GPMC_NCS2),		(IDIS | PTU | EN  | M0)) /*GPMC_nCS2*/\
+	MUX_VAL(CP(GPMC_NCS3),		(IDIS | PTU | EN  | M0)) /*GPMC_nCS3*/\
+	MUX_VAL(CP(GPMC_NCS4),		(IDIS | PTU | EN  | M0)) /*GPMC_nCS4*/\
+	MUX_VAL(CP(GPMC_NCS5),		(IDIS | PTD | DIS | M0)) /*GPMC_nCS5*/\
+	MUX_VAL(CP(GPMC_NCS6),		(IEN  | PTD | DIS | M1)) /*nDMA_REQ2*/\
+	MUX_VAL(CP(GPMC_NCS7),		(IEN  | PTU | EN  | M1)) /*nDMA_REQ3*/\
+	MUX_VAL(CP(GPMC_NBE1),		(IEN  | PTD | DIS | M0)) /*GPMC_nBE1*/\
+	MUX_VAL(CP(GPMC_WAIT2),		(IEN  | PTU | EN  | M0)) /*GPMC_WAIT2*/\
+	MUX_VAL(CP(GPMC_WAIT3),		(IEN  | PTU | EN  | M0)) /*GPMC_WAIT3*/\
+	MUX_VAL(CP(GPMC_CLK),		(IDIS | PTD | DIS | M0)) /*GPMC_CLK*/\
+	MUX_VAL(CP(GPMC_NADV_ALE),	(IDIS | PTD | DIS | M0)) /*GPMC_nADV*/\
+	MUX_VAL(CP(GPMC_NOE),		(IDIS | PTD | DIS | M0)) /*GPMC_nOE*/\
+	MUX_VAL(CP(GPMC_NWE),		(IDIS | PTD | DIS | M0)) /*GPMC_nWE*/\
+	MUX_VAL(CP(GPMC_NBE0_CLE),	(IDIS | PTD | DIS | M0)) /*GPMC_nBE0*/\
+	MUX_VAL(CP(GPMC_NWP),		(IEN  | PTD | DIS | M0)) /*GPMC_nWP*/\
+	MUX_VAL(CP(GPMC_WAIT0),		(IEN  | PTU | EN  | M0)) /*GPMC_WAIT0*/\
+	MUX_VAL(CP(GPMC_WAIT1),		(IEN  | PTU | EN  | M0)) /*GPMC_WAIT1*/\
+/* DSS */\
+	MUX_VAL(CP(DSS_PCLK),		(IDIS | PTD | DIS | M0)) /*DSS_PCLK*/\
+	MUX_VAL(CP(DSS_HSYNC),		(IDIS | PTD | DIS | M0)) /*DSS_HSYNC*/\
+	MUX_VAL(CP(DSS_VSYNC),		(IDIS | PTD | DIS | M0)) /*DSS_VSYNC*/\
+	MUX_VAL(CP(DSS_ACBIAS),		(IDIS | PTD | DIS | M0)) /*DSS_ACBIAS*/\
+	MUX_VAL(CP(DSS_DATA0),		(IDIS | PTD | DIS | M0)) /*DSS_DATA0*/\
+	MUX_VAL(CP(DSS_DATA1),		(IDIS | PTD | DIS | M0)) /*DSS_DATA1*/\
+	MUX_VAL(CP(DSS_DATA2),		(IDIS | PTD | DIS | M0)) /*DSS_DATA2*/\
+	MUX_VAL(CP(DSS_DATA3),		(IDIS | PTD | DIS | M0)) /*DSS_DATA3*/\
+	MUX_VAL(CP(DSS_DATA4),		(IDIS | PTD | DIS | M0)) /*DSS_DATA4*/\
+	MUX_VAL(CP(DSS_DATA5),		(IDIS | PTD | DIS | M0)) /*DSS_DATA5*/\
+	MUX_VAL(CP(DSS_DATA6),		(IDIS | PTD | DIS | M0)) /*DSS_DATA6*/\
+	MUX_VAL(CP(DSS_DATA7),		(IDIS | PTD | DIS | M0)) /*DSS_DATA7*/\
+	MUX_VAL(CP(DSS_DATA8),		(IDIS | PTD | DIS | M0)) /*DSS_DATA8*/\
+	MUX_VAL(CP(DSS_DATA9),		(IDIS | PTD | DIS | M0)) /*DSS_DATA9*/\
+	MUX_VAL(CP(DSS_DATA10),		(IDIS | PTD | DIS | M0)) /*DSS_DATA10*/\
+	MUX_VAL(CP(DSS_DATA11),		(IDIS | PTD | DIS | M0)) /*DSS_DATA11*/\
+	MUX_VAL(CP(DSS_DATA12),		(IDIS | PTD | DIS | M0)) /*DSS_DATA12*/\
+	MUX_VAL(CP(DSS_DATA13),		(IDIS | PTD | DIS | M0)) /*DSS_DATA13*/\
+	MUX_VAL(CP(DSS_DATA14),		(IDIS | PTD | DIS | M0)) /*DSS_DATA14*/\
+	MUX_VAL(CP(DSS_DATA15),		(IDIS | PTD | DIS | M0)) /*DSS_DATA15*/\
+	MUX_VAL(CP(DSS_DATA16),		(IDIS | PTD | DIS | M0)) /*DSS_DATA16*/\
+	MUX_VAL(CP(DSS_DATA17),		(IDIS | PTD | DIS | M0)) /*DSS_DATA17*/\
+	MUX_VAL(CP(DSS_DATA18),		(IDIS | PTD | DIS | M0)) /*DSS_DATA18*/\
+	MUX_VAL(CP(DSS_DATA19),		(IDIS | PTD | DIS | M0)) /*DSS_DATA19*/\
+	MUX_VAL(CP(DSS_DATA20),		(IDIS | PTD | DIS | M0)) /*DSS_DATA20*/\
+	MUX_VAL(CP(DSS_DATA21),		(IDIS | PTD | DIS | M0)) /*DSS_DATA21*/\
+	MUX_VAL(CP(DSS_DATA22),		(IDIS | PTD | DIS | M0)) /*DSS_DATA22*/\
+	MUX_VAL(CP(DSS_DATA23),		(IDIS | PTD | DIS | M0)) /*DSS_DATA23*/\
+/* CAMERA */\
+	MUX_VAL(CP(CAM_HS),		(IEN  | PTU | EN  | M0)) /*CAM_HS*/\
+	MUX_VAL(CP(CAM_VS),		(IEN  | PTU | EN  | M0)) /*CAM_VS*/\
+	MUX_VAL(CP(CAM_XCLKA),		(IDIS | PTD | DIS | M0)) /*CAM_XCLKA*/\
+	MUX_VAL(CP(CAM_PCLK),		(IEN  | PTU | EN  | M0)) /*CAM_PCLK*/\
+	MUX_VAL(CP(CAM_FLD),		(IDIS | PTD | DIS | M4)) /*GPIO_98*/\
+	MUX_VAL(CP(CAM_D0),		(IEN  | PTD | DIS | M0)) /*CAM_D0*/\
+	MUX_VAL(CP(CAM_D1),		(IEN  | PTD | DIS | M0)) /*CAM_D1*/\
+	MUX_VAL(CP(CAM_D2),		(IEN  | PTD | DIS | M0)) /*CAM_D2*/\
+	MUX_VAL(CP(CAM_D3),		(IEN  | PTD | DIS | M0)) /*CAM_D3*/\
+	MUX_VAL(CP(CAM_D4),		(IEN  | PTD | DIS | M0)) /*CAM_D4*/\
+	MUX_VAL(CP(CAM_D5),		(IEN  | PTD | DIS | M0)) /*CAM_D5*/\
+	MUX_VAL(CP(CAM_D6),		(IEN  | PTD | DIS | M0)) /*CAM_D6*/\
+	MUX_VAL(CP(CAM_D7),		(IEN  | PTD | DIS | M0)) /*CAM_D7*/\
+	MUX_VAL(CP(CAM_D8),		(IEN  | PTD | DIS | M0)) /*CAM_D8*/\
+	MUX_VAL(CP(CAM_D9),		(IEN  | PTD | DIS | M0)) /*CAM_D9*/\
+	MUX_VAL(CP(CAM_D10),		(IEN  | PTD | DIS | M0)) /*CAM_D10*/\
+	MUX_VAL(CP(CAM_D11),		(IEN  | PTD | DIS | M0)) /*CAM_D11*/\
+	MUX_VAL(CP(CAM_XCLKB),		(IDIS | PTD | DIS | M0)) /*CAM_XCLKB*/\
+	MUX_VAL(CP(CAM_WEN),		(IEN  | PTD | DIS | M4)) /*GPIO_167*/\
+	MUX_VAL(CP(CAM_STROBE),		(IDIS | PTD | DIS | M0)) /*CAM_STROBE*/\
+	MUX_VAL(CP(CSI2_DX0),		(IEN  | PTD | DIS | M0)) /*CSI2_DX0*/\
+	MUX_VAL(CP(CSI2_DY0),		(IEN  | PTD | DIS | M0)) /*CSI2_DY0*/\
+	MUX_VAL(CP(CSI2_DX1),		(IEN  | PTD | DIS | M0)) /*CSI2_DX1*/\
+	MUX_VAL(CP(CSI2_DY1),		(IEN  | PTD | DIS | M0)) /*CSI2_DY1*/\
+/* Audio Interface */\
+	MUX_VAL(CP(MCBSP2_FSX),		(IEN  | PTD | DIS | M0)) /*McBSP2_FSX*/\
+	MUX_VAL(CP(MCBSP2_CLKX),	(IEN  | PTD | DIS | M0)) /*McBSP2_CLK*/\
+	MUX_VAL(CP(MCBSP2_DR),		(IEN  | PTD | DIS | M0)) /*McBSP2_DR*/\
+	MUX_VAL(CP(MCBSP2_DX),		(IDIS | PTD | DIS | M0)) /*McBSP2_DX*/\
+/* Expansion card */\
+	MUX_VAL(CP(MMC1_CLK),		(IDIS | PTU | EN  | M0)) /*MMC1_CLK*/\
+	MUX_VAL(CP(MMC1_CMD),		(IEN  | PTU | EN  | M0)) /*MMC1_CMD*/\
+	MUX_VAL(CP(MMC1_DAT0),		(IEN  | PTU | EN  | M0)) /*MMC1_DAT0*/\
+	MUX_VAL(CP(MMC1_DAT1),		(IEN  | PTU | EN  | M0)) /*MMC1_DAT1*/\
+	MUX_VAL(CP(MMC1_DAT2),		(IEN  | PTU | EN  | M0)) /*MMC1_DAT2*/\
+	MUX_VAL(CP(MMC1_DAT3),		(IEN  | PTU | EN  | M0)) /*MMC1_DAT3*/\
+	MUX_VAL(CP(MMC1_DAT4),		(IEN  | PTU | EN  | M0)) /*MMC1_DAT4*/\
+	MUX_VAL(CP(MMC1_DAT5),		(IEN  | PTU | EN  | M0)) /*MMC1_DAT5*/\
+	MUX_VAL(CP(MMC1_DAT6),		(IEN  | PTU | EN  | M0)) /*MMC1_DAT6*/\
+	MUX_VAL(CP(MMC1_DAT7),		(IEN  | PTU | EN  | M0)) /*MMC1_DAT7*/\
+/* Wireless LAN */\
+	MUX_VAL(CP(MMC2_CLK),		(IEN  | PTU | EN  | M4)) /*GPIO_130*/\
+	MUX_VAL(CP(MMC2_CMD),		(IEN  | PTU | EN  | M4)) /*GPIO_131*/\
+	MUX_VAL(CP(MMC2_DAT0),		(IEN  | PTU | EN  | M4)) /*GPIO_132*/\
+	MUX_VAL(CP(MMC2_DAT1),		(IEN  | PTU | EN  | M4)) /*GPIO_133*/\
+	MUX_VAL(CP(MMC2_DAT2),		(IEN  | PTU | EN  | M4)) /*GPIO_134*/\
+	MUX_VAL(CP(MMC2_DAT3),		(IEN  | PTU | EN  | M4)) /*GPIO_135*/\
+	MUX_VAL(CP(MMC2_DAT4),		(IEN  | PTU | EN  | M4)) /*GPIO_136*/\
+	MUX_VAL(CP(MMC2_DAT5),		(IEN  | PTU | EN  | M4)) /*GPIO_137*/\
+	MUX_VAL(CP(MMC2_DAT6),		(IEN  | PTU | EN  | M4)) /*GPIO_138*/\
+	MUX_VAL(CP(MMC2_DAT7),		(IEN  | PTU | EN  | M4)) /*GPIO_139*/\
+/* Bluetooth */\
+	MUX_VAL(CP(MCBSP3_DX),		(IEN  | PTD | DIS | M1)) /*UART2_CTS*/\
+	MUX_VAL(CP(MCBSP3_DR),		(IDIS | PTD | DIS | M1)) /*UART2_RTS*/\
+	MUX_VAL(CP(MCBSP3_CLKX),	(IDIS | PTD | DIS | M1)) /*UART2_TX*/\
+	MUX_VAL(CP(MCBSP3_FSX),		(IEN  | PTD | DIS | M1)) /*UART2_RX*/\
+	MUX_VAL(CP(UART2_CTS),		(IEN  | PTD | DIS | M4)) /*GPIO_144*/\
+	MUX_VAL(CP(UART2_RTS),		(IEN  | PTD | DIS | M4)) /*GPIO_145*/\
+	MUX_VAL(CP(UART2_TX),		(IEN  | PTD | DIS | M4)) /*GPIO_146*/\
+	MUX_VAL(CP(UART2_RX),		(IEN  | PTD | DIS | M4)) /*GPIO_147*/\
+/* Modem Interface */\
+	MUX_VAL(CP(UART1_TX),		(IDIS | PTD | DIS | M0)) /*UART1_TX*/\
+	MUX_VAL(CP(UART1_RTS),		(IDIS | PTD | DIS | M4)) /*GPIO_149*/\
+	MUX_VAL(CP(UART1_CTS),		(IDIS | PTD | DIS | M4)) /*GPIO_150*/\
+	MUX_VAL(CP(UART1_RX),		(IEN  | PTD | DIS | M0)) /*UART1_RX*/\
+	MUX_VAL(CP(MCBSP4_CLKX),	(IEN  | PTD | DIS | M1)) /*SSI1_DAT*/\
+	MUX_VAL(CP(MCBSP4_DR),		(IEN  | PTD | DIS | M1)) /*SSI1_FLAG*/\
+	MUX_VAL(CP(MCBSP4_DX),		(IEN  | PTD | DIS | M1)) /*SSI1_RDY*/\
+	MUX_VAL(CP(MCBSP4_FSX),		(IEN  | PTD | DIS | M1)) /*SSI1_WAKE*/\
+	MUX_VAL(CP(MCBSP1_CLKR),	(IDIS | PTD | DIS | M4)) /*GPIO_156*/\
+	MUX_VAL(CP(MCBSP1_FSR),		(IDIS | PTU | EN  | M4)) /*GPIO_157*/\
+	MUX_VAL(CP(MCBSP1_DX),		(IDIS | PTD | DIS | M4)) /*GPIO_158*/\
+	MUX_VAL(CP(MCBSP1_DR),		(IDIS | PTD | DIS | M4)) /*GPIO_159*/\
+	MUX_VAL(CP(MCBSP_CLKS),		(IEN  | PTU | DIS | M0)) /*McBSP_CLKS*/\
+	MUX_VAL(CP(MCBSP1_FSX),		(IDIS | PTD | DIS | M4)) /*GPIO_161*/\
+	MUX_VAL(CP(MCBSP1_CLKX),	(IDIS | PTD | DIS | M4)) /*GPIO_162*/\
+/* Serial Interface */\
+	MUX_VAL(CP(UART3_CTS_RCTX),	(IEN  | PTD | EN  | M0)) /*UART3_CTS*/\
+	MUX_VAL(CP(UART3_RTS_SD),	(IDIS | PTD | DIS | M0)) /*UART3_RTS*/\
+	MUX_VAL(CP(UART3_RX_IRRX),	(IEN  | PTD | DIS | M0)) /*UART3_RX*/\
+	MUX_VAL(CP(UART3_TX_IRTX),	(IDIS | PTD | DIS | M0)) /*UART3_TX*/\
+	MUX_VAL(CP(HSUSB0_CLK),		(IEN  | PTD | DIS | M0)) /*HSUSB0_CLK*/\
+	MUX_VAL(CP(HSUSB0_STP),		(IDIS | PTU | EN  | M0)) /*HSUSB0_STP*/\
+	MUX_VAL(CP(HSUSB0_DIR),		(IEN  | PTD | DIS | M0)) /*HSUSB0_DIR*/\
+	MUX_VAL(CP(HSUSB0_NXT),		(IEN  | PTD | DIS | M0)) /*HSUSB0_NXT*/\
+	MUX_VAL(CP(HSUSB0_DATA0),	(IEN  | PTD | DIS | M0)) /*HSUSB0_DA0*/\
+	MUX_VAL(CP(HSUSB0_DATA1),	(IEN  | PTD | DIS | M0)) /*HSUSB0_DA1*/\
+	MUX_VAL(CP(HSUSB0_DATA2),	(IEN  | PTD | DIS | M0)) /*HSUSB0_DA2*/\
+	MUX_VAL(CP(HSUSB0_DATA3),	(IEN  | PTD | DIS | M0)) /*HSUSB0_DA3*/\
+	MUX_VAL(CP(HSUSB0_DATA4),	(IEN  | PTD | DIS | M0)) /*HSUSB0_DA4*/\
+	MUX_VAL(CP(HSUSB0_DATA5),	(IEN  | PTD | DIS | M0)) /*HSUSB0_DA5*/\
+	MUX_VAL(CP(HSUSB0_DATA6),	(IEN  | PTD | DIS | M0)) /*HSUSB0_DA6*/\
+	MUX_VAL(CP(HSUSB0_DATA7),	(IEN  | PTD | DIS | M0)) /*HSUSB0_DA7*/\
+	MUX_VAL(CP(I2C1_SCL),		(IEN  | PTU | EN  | M0)) /*I2C1_SCL*/\
+	MUX_VAL(CP(I2C1_SDA),		(IEN  | PTU | EN  | M0)) /*I2C1_SDA*/\
+	MUX_VAL(CP(I2C2_SCL),		(IEN  | PTU | EN  | M4)) /*GPIO_168*/\
+	MUX_VAL(CP(I2C2_SDA),		(IEN  | PTU | EN  | M4)) /*GPIO_183*/\
+	MUX_VAL(CP(I2C3_SCL),		(IEN  | PTU | EN  | M0)) /*I2C3_SCL*/\
+	MUX_VAL(CP(I2C3_SDA),		(IEN  | PTU | EN  | M0)) /*I2C3_SDA*/\
+	MUX_VAL(CP(I2C4_SCL),		(IEN  | PTU | EN  | M0)) /*I2C4_SCL*/\
+	MUX_VAL(CP(I2C4_SDA),		(IEN  | PTU | EN  | M0)) /*I2C4_SDA*/\
+	MUX_VAL(CP(HDQ_SIO),		(IDIS | PTU | EN  | M4)) /*GPIO_170*/\
+	MUX_VAL(CP(MCSPI1_CLK),		(IEN  | PTU | EN  | M4)) /*GPIO_171*/\
+	MUX_VAL(CP(MCSPI1_SIMO),	(IEN  | PTU | EN  | M4)) /*GPIO_172*/\
+	MUX_VAL(CP(MCSPI1_SOMI),	(IEN  | PTD | DIS | M0)) /*McSPI1_SOM*/\
+	MUX_VAL(CP(MCSPI1_CS0),		(IEN  | PTD | EN  | M0)) /*McSPI1_CS0*/\
+	MUX_VAL(CP(MCSPI1_CS1),		(IDIS | PTD | EN  | M0)) /*McSPI1_CS1*/\
+	MUX_VAL(CP(MCSPI1_CS2),		(IDIS | PTD | DIS | M4)) /*GPIO_176*/\
+/* USB EHCI (port 2) */\
+	MUX_VAL(CP(MCSPI1_CS3),		(IEN  | PTU | DIS | M3)) /*HSUSB2_DA2*/\
+	MUX_VAL(CP(MCSPI2_CLK),		(IEN  | PTU | DIS | M3)) /*HSUSB2_DA7*/\
+	MUX_VAL(CP(MCSPI2_SIMO),	(IEN  | PTU | DIS | M3)) /*HSUSB2_DA4*/\
+	MUX_VAL(CP(MCSPI2_SOMI),	(IEN  | PTU | DIS | M3)) /*HSUSB2_DA5*/\
+	MUX_VAL(CP(MCSPI2_CS0),		(IEN  | PTU | DIS | M3)) /*HSUSB2_DA6*/\
+	MUX_VAL(CP(MCSPI2_CS1),		(IEN  | PTU | DIS | M3)) /*HSUSB2_DA3*/\
+	MUX_VAL(CP(ETK_D10_ES2),	(IDIS | PTU | DIS | M3)) /*HSUSB2_CLK*/\
+	MUX_VAL(CP(ETK_D11_ES2),	(IDIS | PTU | DIS | M3)) /*HSUSB2_STP*/\
+	MUX_VAL(CP(ETK_D12_ES2),	(IEN  | PTU | DIS | M3)) /*HSUSB2_DIR*/\
+	MUX_VAL(CP(ETK_D13_ES2),	(IEN  | PTU | DIS | M3)) /*HSUSB2_NXT*/\
+	MUX_VAL(CP(ETK_D14_ES2),	(IEN  | PTU | DIS | M3)) /*HSUSB2_DA0*/\
+	MUX_VAL(CP(ETK_D15_ES2),	(IEN  | PTU | DIS | M3)) /*HSUSB2_DA1*/\
+/* Control and debug */\
+	MUX_VAL(CP(SYS_32K),		(IEN  | PTD | DIS | M0)) /*SYS_32K*/\
+	MUX_VAL(CP(SYS_CLKREQ),		(IEN  | PTD | DIS | M0)) /*SYS_CLKREQ*/\
+	MUX_VAL(CP(SYS_NIRQ),		(IEN  | PTU | EN  | M0)) /*SYS_nIRQ*/\
+	MUX_VAL(CP(SYS_BOOT0),		(IEN  | PTD | DIS | M4)) /*GPIO_2*/\
+	MUX_VAL(CP(SYS_BOOT1),		(IEN  | PTD | DIS | M4)) /*GPIO_3*/\
+	MUX_VAL(CP(SYS_BOOT2),		(IEN  | PTD | DIS | M4)) /*MMC1_WP*/\
+	MUX_VAL(CP(SYS_BOOT3),		(IEN  | PTD | DIS | M4)) /*GPIO_5*/\
+	MUX_VAL(CP(SYS_BOOT4),		(IEN  | PTD | DIS | M4)) /*GPIO_6*/\
+	MUX_VAL(CP(SYS_BOOT5),		(IEN  | PTD | DIS | M4)) /*GPIO_7*/\
+	MUX_VAL(CP(SYS_BOOT6),		(IDIS | PTD | DIS | M4)) /*GPIO_8*/\
+	MUX_VAL(CP(SYS_OFF_MODE),	(IEN  | PTD | DIS | M0)) /*SYS_OFF_MD*/\
+	MUX_VAL(CP(SYS_CLKOUT1),	(IEN  | PTD | DIS | M0)) /*SYS_CLKOUT*/\
+	MUX_VAL(CP(SYS_CLKOUT2),	(IEN  | PTU | EN  | M4)) /*GPIO_186*/\
+	MUX_VAL(CP(ETK_CLK_ES2),	(IDIS | PTU | EN  | M3)) /*HSUSB1_STP*/\
+	MUX_VAL(CP(ETK_CTL_ES2),	(IDIS | PTU | DIS | M3)) /*HSUSB1_CLK*/\
+	MUX_VAL(CP(ETK_D0_ES2),		(IEN  | PTU | DIS | M3)) /*HSUSB1_DA0*/\
+	MUX_VAL(CP(ETK_D1_ES2),		(IEN  | PTU | DIS | M3)) /*HSUSB1_DA1*/\
+	MUX_VAL(CP(ETK_D2_ES2),		(IEN  | PTU | DIS | M3)) /*HSUSB1_DA2*/\
+	MUX_VAL(CP(ETK_D3_ES2),		(IEN  | PTU | DIS | M3)) /*HSUSB1_DA7*/\
+	MUX_VAL(CP(ETK_D4_ES2),		(IEN  | PTU | DIS | M3)) /*HSUSB1_DA4*/\
+	MUX_VAL(CP(ETK_D5_ES2),		(IEN  | PTU | DIS | M3)) /*HSUSB1_DA5*/\
+	MUX_VAL(CP(ETK_D6_ES2),		(IEN  | PTU | DIS | M3)) /*HSUSB1_DA6*/\
+	MUX_VAL(CP(ETK_D7_ES2),		(IEN  | PTU | DIS | M3)) /*HSUSB1_DA3*/\
+	MUX_VAL(CP(ETK_D8_ES2),		(IEN  | PTU | DIS | M3)) /*HSUSB1_DIR*/\
+	MUX_VAL(CP(ETK_D9_ES2),		(IEN  | PTU | DIS | M3)) /*HSUSB1_NXT*/\
+	MUX_VAL(CP(D2D_MCAD1),		(IEN  | PTD | EN  | M0)) /*d2d_mcad1*/\
+	MUX_VAL(CP(D2D_MCAD2),		(IEN  | PTD | EN  | M0)) /*d2d_mcad2*/\
+	MUX_VAL(CP(D2D_MCAD3),		(IEN  | PTD | EN  | M0)) /*d2d_mcad3*/\
+	MUX_VAL(CP(D2D_MCAD4),		(IEN  | PTD | EN  | M0)) /*d2d_mcad4*/\
+	MUX_VAL(CP(D2D_MCAD5),		(IEN  | PTD | EN  | M0)) /*d2d_mcad5*/\
+	MUX_VAL(CP(D2D_MCAD6),		(IEN  | PTD | EN  | M0)) /*d2d_mcad6*/\
+	MUX_VAL(CP(D2D_MCAD7),		(IEN  | PTD | EN  | M0)) /*d2d_mcad7*/\
+	MUX_VAL(CP(D2D_MCAD8),		(IEN  | PTD | EN  | M0)) /*d2d_mcad8*/\
+	MUX_VAL(CP(D2D_MCAD9),		(IEN  | PTD | EN  | M0)) /*d2d_mcad9*/\
+	MUX_VAL(CP(D2D_MCAD10),		(IEN  | PTD | EN  | M0)) /*d2d_mcad10*/\
+	MUX_VAL(CP(D2D_MCAD11),		(IEN  | PTD | EN  | M0)) /*d2d_mcad11*/\
+	MUX_VAL(CP(D2D_MCAD12),		(IEN  | PTD | EN  | M0)) /*d2d_mcad12*/\
+	MUX_VAL(CP(D2D_MCAD13),		(IEN  | PTD | EN  | M0)) /*d2d_mcad13*/\
+	MUX_VAL(CP(D2D_MCAD14),		(IEN  | PTD | EN  | M0)) /*d2d_mcad14*/\
+	MUX_VAL(CP(D2D_MCAD15),		(IEN  | PTD | EN  | M0)) /*d2d_mcad15*/\
+	MUX_VAL(CP(D2D_MCAD16),		(IEN  | PTD | EN  | M0)) /*d2d_mcad16*/\
+	MUX_VAL(CP(D2D_MCAD17),		(IEN  | PTD | EN  | M0)) /*d2d_mcad17*/\
+	MUX_VAL(CP(D2D_MCAD18),		(IEN  | PTD | EN  | M0)) /*d2d_mcad18*/\
+	MUX_VAL(CP(D2D_MCAD19),		(IEN  | PTD | EN  | M0)) /*d2d_mcad19*/\
+	MUX_VAL(CP(D2D_MCAD20),		(IEN  | PTD | EN  | M0)) /*d2d_mcad20*/\
+	MUX_VAL(CP(D2D_MCAD21),		(IEN  | PTD | EN  | M0)) /*d2d_mcad21*/\
+	MUX_VAL(CP(D2D_MCAD22),		(IEN  | PTD | EN  | M0)) /*d2d_mcad22*/\
+	MUX_VAL(CP(D2D_MCAD23),		(IEN  | PTD | EN  | M0)) /*d2d_mcad23*/\
+	MUX_VAL(CP(D2D_MCAD24),		(IEN  | PTD | EN  | M0)) /*d2d_mcad24*/\
+	MUX_VAL(CP(D2D_MCAD25),		(IEN  | PTD | EN  | M0)) /*d2d_mcad25*/\
+	MUX_VAL(CP(D2D_MCAD26),		(IEN  | PTD | EN  | M0)) /*d2d_mcad26*/\
+	MUX_VAL(CP(D2D_MCAD27),		(IEN  | PTD | EN  | M0)) /*d2d_mcad27*/\
+	MUX_VAL(CP(D2D_MCAD28),		(IEN  | PTD | EN  | M0)) /*d2d_mcad28*/\
+	MUX_VAL(CP(D2D_MCAD29),		(IEN  | PTD | EN  | M0)) /*d2d_mcad29*/\
+	MUX_VAL(CP(D2D_MCAD30),		(IEN  | PTD | EN  | M0)) /*d2d_mcad30*/\
+	MUX_VAL(CP(D2D_MCAD31),		(IEN  | PTD | EN  | M0)) /*d2d_mcad31*/\
+	MUX_VAL(CP(D2D_MCAD32),		(IEN  | PTD | EN  | M0)) /*d2d_mcad32*/\
+	MUX_VAL(CP(D2D_MCAD33),		(IEN  | PTD | EN  | M0)) /*d2d_mcad33*/\
+	MUX_VAL(CP(D2D_MCAD34),		(IEN  | PTD | EN  | M0)) /*d2d_mcad34*/\
+	MUX_VAL(CP(D2D_MCAD35),		(IEN  | PTD | EN  | M0)) /*d2d_mcad35*/\
+	MUX_VAL(CP(D2D_MCAD36),		(IEN  | PTD | EN  | M0)) /*d2d_mcad36*/\
+	MUX_VAL(CP(D2D_CLK26MI),	(IEN  | PTD | DIS | M0)) /*d2d_clk26m*/\
+	MUX_VAL(CP(D2D_NRESPWRON),	(IEN  | PTD | EN  | M0)) /*d2d_nrespw*/\
+	MUX_VAL(CP(D2D_NRESWARM),	(IEN  | PTU | EN  | M0)) /*d2d_nreswa*/\
+	MUX_VAL(CP(D2D_ARM9NIRQ),	(IEN  | PTD | DIS | M0)) /*d2d_arm9ni*/\
+	MUX_VAL(CP(D2D_UMA2P6FIQ),	(IEN  | PTD | DIS | M0)) /*d2d_uma2p6*/\
+	MUX_VAL(CP(D2D_SPINT),		(IEN  | PTD | EN  | M0)) /*d2d_spint*/\
+	MUX_VAL(CP(D2D_FRINT),		(IEN  | PTD | EN  | M0)) /*d2d_frint*/\
+	MUX_VAL(CP(D2D_DMAREQ0),	(IEN  | PTD | DIS | M0)) /*d2d_dmare0*/\
+	MUX_VAL(CP(D2D_DMAREQ1),	(IEN  | PTD | DIS | M0)) /*d2d_dmare1*/\
+	MUX_VAL(CP(D2D_DMAREQ2),	(IEN  | PTD | DIS | M0)) /*d2d_dmare2*/\
+	MUX_VAL(CP(D2D_DMAREQ3),	(IEN  | PTD | DIS | M0)) /*d2d_dmare3*/\
+	MUX_VAL(CP(D2D_N3GTRST),	(IEN  | PTD | DIS | M0)) /*d2d_n3gtrs*/\
+	MUX_VAL(CP(D2D_N3GTDI),		(IEN  | PTD | DIS | M0)) /*d2d_n3gtdi*/\
+	MUX_VAL(CP(D2D_N3GTDO),		(IEN  | PTD | DIS | M0)) /*d2d_n3gtdo*/\
+	MUX_VAL(CP(D2D_N3GTMS),		(IEN  | PTD | DIS | M0)) /*d2d_n3gtms*/\
+	MUX_VAL(CP(D2D_N3GTCK),		(IEN  | PTD | DIS | M0)) /*d2d_n3gtck*/\
+	MUX_VAL(CP(D2D_N3GRTCK),	(IEN  | PTD | DIS | M0)) /*d2d_n3grtc*/\
+	MUX_VAL(CP(D2D_MSTDBY),		(IEN  | PTU | EN  | M0)) /*d2d_mstdby*/\
+	MUX_VAL(CP(D2D_SWAKEUP),	(IEN  | PTD | EN  | M0)) /*d2d_swakeu*/\
+	MUX_VAL(CP(D2D_IDLEREQ),	(IEN  | PTD | DIS | M0)) /*d2d_idlere*/\
+	MUX_VAL(CP(D2D_IDLEACK),	(IEN  | PTU | EN  | M0)) /*d2d_idleac*/\
+	MUX_VAL(CP(D2D_MWRITE),		(IEN  | PTD | DIS | M0)) /*d2d_mwrite*/\
+	MUX_VAL(CP(D2D_SWRITE),		(IEN  | PTD | DIS | M0)) /*d2d_swrite*/\
+	MUX_VAL(CP(D2D_MREAD),		(IEN  | PTD | DIS | M0)) /*d2d_mread*/\
+	MUX_VAL(CP(D2D_SREAD),		(IEN  | PTD | DIS | M0)) /*d2d_sread*/\
+	MUX_VAL(CP(D2D_MBUSFLAG),	(IEN  | PTD | DIS | M0)) /*d2d_mbusfl*/\
+	MUX_VAL(CP(D2D_SBUSFLAG),	(IEN  | PTD | DIS | M0)) /*d2d_sbusfl*/\
+	MUX_VAL(CP(SDRC_CKE0),		(IDIS | PTU | EN  | M0)) /*sdrc_cke0*/\
+	MUX_VAL(CP(SDRC_CKE1),		(IDIS | PTU | EN  | M0)) /*sdrc_cke1*/
+
+#define MUX_RX51_C() \
+	MUX_VAL(CP(MCBSP3_DX),		(IEN | PTD | DIS | M4)) /*GPIO_140*/\
+	MUX_VAL(CP(MCBSP3_DR),		(IEN | PTD | DIS | M4)) /*GPIO_142*/\
+	MUX_VAL(CP(MCBSP3_CLKX),	(IEN | PTD | DIS | M4)) /*GPIO_141*/\
+	MUX_VAL(CP(UART2_CTS),		(IEN  | PTU | EN  | M0)) /*UART2_CTS*/\
+	MUX_VAL(CP(UART2_RTS),		(IDIS | PTD | DIS | M0)) /*UART2_RTS*/\
+	MUX_VAL(CP(UART2_TX),		(IDIS | PTD | DIS | M0)) /*UART2_TX*/
+
+#endif

board/nokia/rx51/tag_omap.h

@@ -0,0 +1,311 @@
+/*
+ * (C) Copyright 2011-2012
+ * Pali Rohár <pali.rohar@gmail.com>
+ *
+ * (C) Copyright 2011
+ * marcel@mesa.nl, Mesa Consulting B.V.
+ *
+ * (C) Copyright 2004-2005
+ * Nokia Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+/*
+ *  Code copied from maemo kernel 2.6.28 file
+ *  arch/arm/plat-omap/include/mach/board.h
+ *
+ *  Information structures for board-specific data
+ *
+ *  Copyright (C) 2004	Nokia Corporation
+ *  Written by Juha Yrjölä <juha.yrjola@nokia.com>
+ */
+
+/* Different peripheral ids */
+#define OMAP_TAG_CLOCK		0x4f01
+#define OMAP_TAG_SERIAL_CONSOLE	0x4f03
+#define OMAP_TAG_USB		0x4f04
+#define OMAP_TAG_LCD		0x4f05
+#define OMAP_TAG_GPIO_SWITCH	0x4f06
+#define OMAP_TAG_UART		0x4f07
+#define OMAP_TAG_FBMEM		0x4f08
+#define OMAP_TAG_STI_CONSOLE	0x4f09
+#define OMAP_TAG_CAMERA_SENSOR	0x4f0a
+#define OMAP_TAG_PARTITION	0x4f0b
+#define OMAP_TAG_TEA5761	0x4f10
+#define OMAP_TAG_TMP105		0x4f11
+
+#define OMAP_TAG_BOOT_REASON	0x4f80
+#define OMAP_TAG_FLASH_PART_STR	0x4f81
+#define OMAP_TAG_VERSION_STR	0x4f82
+
+#define OMAP_TAG_NOKIA_BT	0x4e01
+#define OMAP_TAG_WLAN_CX3110X	0x4e02
+#define OMAP_TAG_CBUS		0x4e03
+#define OMAP_TAG_EM_ASIC_BB5	0x4e04
+
+
+struct omap_clock_config {
+	/* 0 for 12 MHz, 1 for 13 MHz and 2 for 19.2 MHz */
+	u8 system_clock_type;
+};
+
+struct omap_serial_console_config {
+	u8 console_uart;
+	u32 console_speed;
+};
+
+struct omap_sti_console_config {
+	unsigned enable:1;
+	u8 channel;
+};
+
+struct omap_usb_config {
+	/* Configure drivers according to the connectors on your board:
+	 *  - "A" connector (rectagular)
+	 *	... for host/OHCI use, set "register_host".
+	 *  - "B" connector (squarish) or "Mini-B"
+	 *	... for device/gadget use, set "register_dev".
+	 *  - "Mini-AB" connector (very similar to Mini-B)
+	 *	... for OTG use as device OR host, initialize "otg"
+	 */
+	unsigned	register_host:1;
+	unsigned	register_dev:1;
+	u8		otg;	/* port number, 1-based:  usb1 == 2 */
+
+	u8		hmc_mode;
+
+	/* implicitly true if otg:  host supports remote wakeup? */
+	u8		rwc;
+
+	/* signaling pins used to talk to transceiver on usbN:
+	 *  0 == usbN unused
+	 *  2 == usb0-only, using internal transceiver
+	 *  3 == 3 wire bidirectional
+	 *  4 == 4 wire bidirectional
+	 *  6 == 6 wire unidirectional (or TLL)
+	 */
+	u8		pins[3];
+};
+
+struct omap_lcd_config {
+	char panel_name[16];
+	char ctrl_name[16];
+	s16  nreset_gpio;
+	u8   data_lines;
+};
+
+struct omap_fbmem_config {
+	u32 start;
+	u32 size;
+};
+
+struct omap_gpio_switch_config {
+	char name[12];
+	u16 gpio;
+	u8 flags:4;
+	u8 type:4;
+	unsigned int key_code:24; /* Linux key code */
+};
+
+struct omap_uart_config {
+	/* Bit field of UARTs present; bit 0 --> UART1 */
+	unsigned int enabled_uarts;
+};
+
+struct omap_tea5761_config {
+	u16 enable_gpio;
+};
+
+struct omap_partition_config {
+	char name[16];
+	unsigned int size;
+	unsigned int offset;
+	/* same as in include/linux/mtd/partitions.h */
+	unsigned int mask_flags;
+};
+
+struct omap_flash_part_str_config {
+	char part_table[0];
+};
+
+struct omap_boot_reason_config {
+	char reason_str[12];
+};
+
+struct omap_version_config {
+	char component[12];
+	char version[12];
+};
+
+/*
+ *  Code copied from maemo kernel 2.6.28 file
+ *  arch/arm/plat-omap/include/mach/board-nokia.h
+ *
+ *  Information structures for Nokia-specific board config data
+ *
+ *  Copyright (C) 2005  Nokia Corporation
+ */
+
+struct omap_bluetooth_config {
+	u8 chip_type;
+	u8 bt_wakeup_gpio;
+	u8 host_wakeup_gpio;
+	u8 reset_gpio;
+	u8 bt_uart;
+	u8 bd_addr[6];
+	u8 bt_sysclk;
+};
+
+struct omap_wlan_cx3110x_config {
+	u8 chip_type;
+	u8 reserverd;
+	s16 power_gpio;
+	s16 irq_gpio;
+	s16 spi_cs_gpio;
+};
+
+struct omap_cbus_config {
+	s16 clk_gpio;
+	s16 dat_gpio;
+	s16 sel_gpio;
+};
+
+struct omap_em_asic_bb5_config {
+	s16 retu_irq_gpio;
+	s16 tahvo_irq_gpio;
+};
+
+/*
+ *  omap_tag handling
+ *
+ *  processing omap tag structures
+ *
+ *  Copyright (C) 2011  marcel@mesa.nl, Mesa Consulting B.V.
+ *  Copyright (C) 2012  Pali Rohár <pali.rohar@gmail.com>
+ */
+
+/* TI OMAP specific information */
+#define ATAG_BOARD	0x414f4d50
+
+struct tag_omap_header {
+	u16 tag;
+	u16 size;
+};
+
+struct tag_omap {
+	struct tag_omap_header hdr;
+	union {
+		struct omap_clock_config clock;
+		struct omap_serial_console_config serial_console;
+		struct omap_sti_console_config sti_console;
+		struct omap_usb_config usb;
+		struct omap_lcd_config lcd;
+		struct omap_fbmem_config fbmem;
+		struct omap_gpio_switch_config gpio_switch;
+		struct omap_uart_config uart;
+		struct omap_tea5761_config tea5761;
+		struct omap_partition_config partition;
+		struct omap_flash_part_str_config flash_part_str;
+		struct omap_boot_reason_config boot_reason;
+		struct omap_version_config version;
+		struct omap_bluetooth_config bluetooth;
+		struct omap_wlan_cx3110x_config wlan_cx3110x;
+		struct omap_cbus_config cbus;
+		struct omap_em_asic_bb5_config em_asic_bb5;
+	} u;
+};
+
+#define tag_omap_next(t)	((struct tag_omap *)((u8 *)(t) + \
+				(t)->hdr.size + sizeof(struct tag_omap_header)))
+
+#define OMAP_TAG_HEADER_CONFIG(config, type) \
+	.hdr.tag = config, \
+	.hdr.size = sizeof(struct type)
+
+#define OMAP_TAG_UART_CONFIG(p1) \
+	{ \
+		OMAP_TAG_HEADER_CONFIG(OMAP_TAG_UART, omap_uart_config), \
+		.u.uart.enabled_uarts = p1, \
+	}
+
+#define OMAP_TAG_SERIAL_CONSOLE_CONFIG(p1, p2) \
+	{ \
+		OMAP_TAG_HEADER_CONFIG(OMAP_TAG_SERIAL_CONSOLE, \
+			omap_serial_console_config), \
+		.u.serial_console.console_uart = p1, \
+		.u.serial_console.console_speed = p2, \
+	}
+
+#define OMAP_TAG_LCD_CONFIG(p1, p2, p3, p4) \
+	{ \
+		OMAP_TAG_HEADER_CONFIG(OMAP_TAG_LCD, omap_lcd_config), \
+		.u.lcd.panel_name = p1, \
+		.u.lcd.ctrl_name = p2, \
+		.u.lcd.nreset_gpio = p3, \
+		.u.lcd.data_lines = p4, \
+	}
+
+#define OMAP_TAG_GPIO_SWITCH_CONFIG(p1, p2, p3, p4, p5) \
+	{ \
+		OMAP_TAG_HEADER_CONFIG(OMAP_TAG_GPIO_SWITCH, \
+			omap_gpio_switch_config), \
+		.u.gpio_switch.name = p1, \
+		.u.gpio_switch.gpio = p2, \
+		.u.gpio_switch.flags = p3, \
+		.u.gpio_switch.type = p4, \
+		.u.gpio_switch.key_code = p5, \
+	}
+
+#define OMAP_TAG_WLAN_CX3110X_CONFIG(p1, p2, p3, p4, p5) \
+	{ \
+		OMAP_TAG_HEADER_CONFIG(OMAP_TAG_WLAN_CX3110X, \
+			omap_wlan_cx3110x_config), \
+		.u.wlan_cx3110x.chip_type = p1, \
+		.u.wlan_cx3110x.reserverd = p2, \
+		.u.wlan_cx3110x.power_gpio = p3, \
+		.u.wlan_cx3110x.irq_gpio = p4, \
+		.u.wlan_cx3110x.spi_cs_gpio = p5, \
+	}
+
+#define OMAP_TAG_PARTITION_CONFIG(p1, p2, p3, p4) \
+	{ \
+		OMAP_TAG_HEADER_CONFIG(OMAP_TAG_PARTITION, \
+			omap_partition_config), \
+		.u.partition.name = p1, \
+		.u.partition.size = p2, \
+		.u.partition.offset = p3, \
+		.u.partition.mask_flags = p4, \
+	}
+
+#define OMAP_TAG_BOOT_REASON_CONFIG(p1) \
+	{ \
+		OMAP_TAG_HEADER_CONFIG(OMAP_TAG_BOOT_REASON, \
+			omap_boot_reason_config), \
+		.u.boot_reason.reason_str = p1, \
+	}
+
+#define OMAP_TAG_VERSION_STR_CONFIG(p1, p2) \
+	{ \
+		OMAP_TAG_HEADER_CONFIG(OMAP_TAG_VERSION_STR, \
+			omap_version_config), \
+		.u.version.component = p1, \
+		.u.version.version = p2, \
+	}

board/nvidia/common/Makefile

@@ -25,9 +25,7 @@ endif
 
 LIB	= $(obj)lib$(VENDOR).o
 
-COBJS-y += board.o
-COBJS-$(CONFIG_SPI_UART_SWITCH) += uart-spi-switch.o
-COBJS-$(CONFIG_TEGRA_CLOCK_SCALING) += emc.o
+include common.mk
 
 COBJS	:= $(COBJS-y)
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)

board/nvidia/common/common.mk

@@ -0,0 +1,4 @@
+# common options for all tegra boards
+COBJS-y	+= ../../nvidia/common/board.o
+COBJS-$(CONFIG_SPI_UART_SWITCH) += ../../nvidia/common/uart-spi-switch.o
+COBJS-$(CONFIG_TEGRA_CLOCK_SCALING) += ../../nvidia/common/emc.o

board/nvidia/dts/tegra20-harmony.dts

@@ -8,6 +8,7 @@
 
 	aliases {
 		usb0 = "/usb@c5008000";
+		usb1 = "/usb@c5004000";
 	};
 
 	memory {
@@ -52,7 +53,7 @@
 	};
 
 	usb@c5004000 {
-		status = "disabled";
+		nvidia,phy-reset-gpio = <&gpio 169 0>; /* gpio PV1 */
 	};
 
 	nand-controller@70008000 {

board/nvidia/dts/tegra20-whistler.dts

@@ -9,7 +9,6 @@
 	aliases {
 		i2c0 = "/i2c@7000d000";
 		usb0 = "/usb@c5008000";
-		usb1 = "/usb@c5000000";
 	};
 
 	memory {
@@ -61,6 +60,10 @@
 		};
 	};
 
+	usb@c5000000 {
+		status = "disabled";
+	};
+
 	usb@c5004000 {
 		status = "disabled";
 	};

board/nvidia/harmony/harmony.c

@@ -75,3 +75,12 @@ int board_mmc_init(bd_t *bd)
 	return 0;
 }
 #endif
+
+void pin_mux_usb(void)
+{
+	funcmux_select(PERIPH_ID_USB2, FUNCMUX_USB2_ULPI);
+	pinmux_set_func(PINGRP_CDEV2, PMUX_FUNC_PLLP_OUT4);
+	pinmux_tristate_disable(PINGRP_CDEV2);
+	/* USB2 PHY reset GPIO */
+	pinmux_tristate_disable(PINGRP_UAC);
+}

board/nvidia/seaboard/seaboard.c

@@ -26,6 +26,7 @@
 #include <asm/arch/tegra.h>
 #include <asm/arch/clock.h>
 #include <asm/arch/funcmux.h>
+#include <asm/arch/gpio.h>
 #include <asm/arch/pinmux.h>
 #include <asm/arch-tegra/mmc.h>
 #include <asm/gpio.h>
@@ -34,24 +35,15 @@
 #endif
 
 /* TODO: Remove this code when the SPI switch is working */
-#ifndef CONFIG_SPI_UART_SWITCH
-/*
- * Routine: gpio_config_uart_seaboard
- * Description: Force GPIO_PI3 low on Seaboard so UART4 works.
- */
-static void gpio_config_uart_seaboard(void)
+#if !defined(CONFIG_SPI_UART_SWITCH) && (CONFIG_MACH_TYPE != MACH_TYPE_VENTANA)
+void gpio_early_init_uart(void)
 {
 	/* Enable UART via GPIO_PI3 (port 8, bit 3) so serial console works */
+#ifndef CONFIG_SPL_BUILD
 	gpio_request(GPIO_PI3, NULL);
+#endif
 	gpio_direction_output(GPIO_PI3, 0);
 }
-
-void gpio_early_init_uart(void)
-{
-	if (machine_is_ventana())
-		return;
-	gpio_config_uart_seaboard();
-}
 #endif
 
 #ifdef CONFIG_TEGRA_MMC

board/ti/am335x/board.c

@@ -68,6 +68,11 @@ static inline int board_is_evm_sk(void)
 	return !strncmp("A335X_SK", header.name, HDR_NAME_LEN);
 }
 
+static inline int board_is_idk(void)
+{
+	return !strncmp(header.config, "SKU#02", 6);
+}
+
 /*
  * Read header information from EEPROM into global structure.
  */
@@ -242,7 +247,24 @@ void s_init(void)
 	/* UART softreset */
 	u32 regVal;
 
+#ifdef CONFIG_SERIAL1
 	enable_uart0_pin_mux();
+#endif /* CONFIG_SERIAL1 */
+#ifdef CONFIG_SERIAL2
+	enable_uart1_pin_mux();
+#endif /* CONFIG_SERIAL2 */
+#ifdef CONFIG_SERIAL3
+	enable_uart2_pin_mux();
+#endif /* CONFIG_SERIAL3 */
+#ifdef CONFIG_SERIAL4
+	enable_uart3_pin_mux();
+#endif /* CONFIG_SERIAL4 */
+#ifdef CONFIG_SERIAL5
+	enable_uart4_pin_mux();
+#endif /* CONFIG_SERIAL5 */
+#ifdef CONFIG_SERIAL6
+	enable_uart5_pin_mux();
+#endif /* CONFIG_SERIAL6 */
 
 	regVal = readl(&uart_base->uartsyscfg);
 	regVal |= UART_RESET;
@@ -381,7 +403,7 @@ int board_eth_init(bd_t *bis)
 			return -1;
 	}
 
-	if (board_is_bone() || board_is_bone_lt()) {
+	if (board_is_bone() || board_is_bone_lt() || board_is_idk()) {
 		writel(MII_MODE_ENABLE, &cdev->miisel);
 		cpsw_slaves[0].phy_if = cpsw_slaves[1].phy_if =
 				PHY_INTERFACE_MODE_MII;

board/ti/am335x/board.h

@@ -44,6 +44,11 @@ struct am335x_baseboard_id {
  * is required on the board.
  */
 void enable_uart0_pin_mux(void);
+void enable_uart1_pin_mux(void);
+void enable_uart2_pin_mux(void);
+void enable_uart3_pin_mux(void);
+void enable_uart4_pin_mux(void);
+void enable_uart5_pin_mux(void);
 void enable_i2c0_pin_mux(void);
 void enable_board_pin_mux(struct am335x_baseboard_id *header);
 #endif

board/ti/am335x/mux.c

@@ -27,6 +27,36 @@ static struct module_pin_mux uart0_pin_mux[] = {
 	{-1},
 };
 
+static struct module_pin_mux uart1_pin_mux[] = {
+	{OFFSET(uart1_rxd), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* UART1_RXD */
+	{OFFSET(uart1_txd), (MODE(0) | PULLUDEN)},		/* UART1_TXD */
+	{-1},
+};
+
+static struct module_pin_mux uart2_pin_mux[] = {
+	{OFFSET(spi0_sclk), (MODE(1) | PULLUP_EN | RXACTIVE)},	/* UART2_RXD */
+	{OFFSET(spi0_d0), (MODE(1) | PULLUDEN)},		/* UART2_TXD */
+	{-1},
+};
+
+static struct module_pin_mux uart3_pin_mux[] = {
+	{OFFSET(spi0_cs1), (MODE(1) | PULLUP_EN | RXACTIVE)},	/* UART3_RXD */
+	{OFFSET(ecap0_in_pwm0_out), (MODE(1) | PULLUDEN)},	/* UART3_TXD */
+	{-1},
+};
+
+static struct module_pin_mux uart4_pin_mux[] = {
+	{OFFSET(gpmc_wait0), (MODE(6) | PULLUP_EN | RXACTIVE)},	/* UART4_RXD */
+	{OFFSET(gpmc_wpn), (MODE(6) | PULLUDEN)},		/* UART4_TXD */
+	{-1},
+};
+
+static struct module_pin_mux uart5_pin_mux[] = {
+	{OFFSET(lcd_data9), (MODE(4) | PULLUP_EN | RXACTIVE)},	/* UART5_RXD */
+	{OFFSET(lcd_data8), (MODE(4) | PULLUDEN)},		/* UART5_TXD */
+	{-1},
+};
+
 static struct module_pin_mux mmc0_pin_mux[] = {
 	{OFFSET(mmc0_dat3), (MODE(0) | RXACTIVE | PULLUP_EN)},	/* MMC0_DAT3 */
 	{OFFSET(mmc0_dat2), (MODE(0) | RXACTIVE | PULLUP_EN)},	/* MMC0_DAT2 */
@@ -39,6 +69,17 @@ static struct module_pin_mux mmc0_pin_mux[] = {
 	{-1},
 };
 
+static struct module_pin_mux mmc0_no_cd_pin_mux[] = {
+	{OFFSET(mmc0_dat3), (MODE(0) | RXACTIVE | PULLUP_EN)},	/* MMC0_DAT3 */
+	{OFFSET(mmc0_dat2), (MODE(0) | RXACTIVE | PULLUP_EN)},	/* MMC0_DAT2 */
+	{OFFSET(mmc0_dat1), (MODE(0) | RXACTIVE | PULLUP_EN)},	/* MMC0_DAT1 */
+	{OFFSET(mmc0_dat0), (MODE(0) | RXACTIVE | PULLUP_EN)},	/* MMC0_DAT0 */
+	{OFFSET(mmc0_clk), (MODE(0) | RXACTIVE | PULLUP_EN)},	/* MMC0_CLK */
+	{OFFSET(mmc0_cmd), (MODE(0) | RXACTIVE | PULLUP_EN)},	/* MMC0_CMD */
+	{OFFSET(mcasp0_aclkr), (MODE(4) | RXACTIVE)},		/* MMC0_WP */
+	{-1},
+};
+
 static struct module_pin_mux mmc0_pin_mux_sk_evm[] = {
 	{OFFSET(mmc0_dat3), (MODE(0) | RXACTIVE | PULLUP_EN)},	/* MMC0_DAT3 */
 	{OFFSET(mmc0_dat2), (MODE(0) | RXACTIVE | PULLUP_EN)},	/* MMC0_DAT2 */
@@ -135,6 +176,30 @@ void enable_uart0_pin_mux(void)
 	configure_module_pin_mux(uart0_pin_mux);
 }
 
+void enable_uart1_pin_mux(void)
+{
+	configure_module_pin_mux(uart1_pin_mux);
+}
+
+void enable_uart2_pin_mux(void)
+{
+	configure_module_pin_mux(uart2_pin_mux);
+}
+
+void enable_uart3_pin_mux(void)
+{
+	configure_module_pin_mux(uart3_pin_mux);
+}
+
+void enable_uart4_pin_mux(void)
+{
+	configure_module_pin_mux(uart4_pin_mux);
+}
+
+void enable_uart5_pin_mux(void)
+{
+	configure_module_pin_mux(uart5_pin_mux);
+}
 
 void enable_i2c0_pin_mux(void)
 {
@@ -196,12 +261,27 @@ void enable_board_pin_mux(struct am335x_baseboard_id *header)
 			configure_module_pin_mux(mmc1_pin_mux);
 			configure_module_pin_mux(spi0_pin_mux);
 		}
+	} else if (!strncmp(header->config, "SKU#02", 6)) {
+		/*
+		 * Industrial Motor Control (IDK)
+		 * note: IDK console is on UART3 by default.
+		 *       So u-boot mus be build with CONFIG_SERIAL4 and
+		 *       CONFIG_CONS_INDEX=4
+		 */
+		configure_module_pin_mux(mii1_pin_mux);
+		configure_module_pin_mux(mmc0_no_cd_pin_mux);
 	} else if (!strncmp(header->name, "A335X_SK", HDR_NAME_LEN)) {
 		/* Starter Kit EVM */
 		configure_module_pin_mux(i2c1_pin_mux);
 		configure_module_pin_mux(gpio0_7_pin_mux);
 		configure_module_pin_mux(rgmii1_pin_mux);
 		configure_module_pin_mux(mmc0_pin_mux_sk_evm);
+	} else if (!strncmp(header->name, "A335BNLT", HDR_NAME_LEN)) {
+		/* Beaglebone LT pinmux */
+		configure_module_pin_mux(i2c1_pin_mux);
+		configure_module_pin_mux(mii1_pin_mux);
+		configure_module_pin_mux(mmc0_pin_mux);
+		configure_module_pin_mux(mmc1_pin_mux);
 	} else {
 		puts("Unknown board, cannot configure pinmux.");
 		hang();

board/toradex/colibri_t20-common/colibri_t20-common.c

@@ -0,0 +1,44 @@
+/*
+ *  Copyright (C) 2012 Lucas Stach
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <common.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/funcmux.h>
+#include <asm/arch/pinmux.h>
+#include <asm/arch-tegra/board.h>
+
+#include "colibri_t20-common.h"
+
+#ifdef CONFIG_USB_EHCI_TEGRA
+void colibri_t20_common_pin_mux_usb(void)
+{
+	/* module internal USB bus to connect ethernet chipset */
+	funcmux_select(PERIPH_ID_USB2, FUNCMUX_USB2_ULPI);
+	/* ULPI reference clock output */
+	pinmux_set_func(PINGRP_CDEV2, PMUX_FUNC_PLLP_OUT4);
+	pinmux_tristate_disable(PINGRP_CDEV2);
+	/* PHY reset GPIO */
+	pinmux_tristate_disable(PINGRP_UAC);
+	/* VBus GPIO */
+	pinmux_tristate_disable(PINGRP_DTE);
+}
+#endif
+
+#ifdef CONFIG_TEGRA_NAND
+void pin_mux_nand(void)
+{
+	funcmux_select(PERIPH_ID_NDFLASH, FUNCMUX_NDFLASH_KBC_8_BIT);
+}
+#endif

board/toradex/colibri_t20-common/colibri_t20-common.h

@@ -0,0 +1,16 @@
+/*
+ *  Copyright (C) 2012 Lucas Stach
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+void colibri_t20_common_pin_mux_usb(void);

board/toradex/colibri_t20_iris/Makefile

@@ -0,0 +1,40 @@
+#
+#  (C) Copyright 2012 Lucas Stach
+#
+#  This program is free software; you can redistribute it and/or
+#  modify it under the terms of the GNU General Public License as
+#  published by the Free Software Foundation; either version 2 of
+#  the License, or (at your option) any later version.
+#
+#  This program is distributed in the hope that it will be useful,
+#  but WITHOUT ANY WARRANTY; without even the implied warranty of
+#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#  GNU General Public License for more details.
+#
+#
+
+include $(TOPDIR)/config.mk
+
+$(shell mkdir -p $(obj)../../nvidia/common)
+$(shell mkdir -p $(obj)../colibri_t20-common)
+
+LIB	= $(obj)lib$(BOARD).o
+
+COBJS	:= ../../nvidia/common/board.o
+COBJS	+= ../colibri_t20-common/colibri_t20-common.o
+COBJS	+= $(BOARD).o
+
+SRCS	:= $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+
+$(LIB):	$(obj).depend $(OBJS)
+	$(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################

board/toradex/colibri_t20_iris/colibri_t20_iris.c

@@ -0,0 +1,46 @@
+/*
+ *  Copyright (C) 2012 Lucas Stach
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <common.h>
+#include <asm/gpio.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/funcmux.h>
+#include <asm/arch/pinmux.h>
+#include <asm/arch-tegra/board.h>
+#include <asm/arch-tegra/mmc.h>
+
+#include "../colibri_t20-common/colibri_t20-common.h"
+
+#ifdef CONFIG_USB_EHCI_TEGRA
+void pin_mux_usb(void)
+{
+	colibri_t20_common_pin_mux_usb();
+
+	/* USB 1 aka Tegra USB port 3 VBus*/
+	pinmux_tristate_disable(PINGRP_SPIG);
+}
+#endif
+
+#ifdef CONFIG_TEGRA_MMC
+int board_mmc_init(bd_t *bd)
+{
+	funcmux_select(PERIPH_ID_SDMMC4, FUNCMUX_SDMMC4_ATB_GMA_4_BIT);
+	pinmux_tristate_disable(PINGRP_GMB);
+
+	tegra_mmc_init(0, 4, -1, GPIO_PC7);
+
+	return 0;
+}
+#endif

board/toradex/dts/tegra20-colibri_t20_iris.dts

@@ -0,0 +1,38 @@
+/dts-v1/;
+
+/include/ ARCH_CPU_DTS
+
+/ {
+	model = "Toradex Colibri T20";
+	compatible = "toradex,t20", "nvidia,tegra20";
+
+	aliases {
+		usb0 = "/usb@c5008000";
+		usb1 = "/usb@c5000000";
+		usb2 = "/usb@c5004000";
+	};
+
+	usb@c5000000 {
+		dr_mode = "otg";
+	};
+
+	usb@c5004000 {
+		nvidia,phy-reset-gpio = <&gpio 169 0>; /* PV1 */
+		nvidia,vbus-gpio = <&gpio 217 0>; /* PBB1 */
+	};
+
+	usb@c5008000 {
+		nvidia,vbus-gpio = <&gpio 178 1>; /* PW2 low-active */
+	};
+
+	nand-controller@70008000 {
+		nvidia,wp-gpios = <&gpio 144 0>; /* PS0 */
+		nvidia,width = <8>;
+		nvidia,timing = <15 100 25 80 25 10 15 10 100>;
+
+		nand@0 {
+			reg = <0>;
+			compatible = "nand-flash";
+		};
+	};
+};

board/ttcontrol/vision2/vision2.c

@@ -28,6 +28,7 @@
 #include <asm/arch/imx-regs.h>
 #include <asm/arch/mx5x_pins.h>
 #include <asm/arch/crm_regs.h>
+#include <asm/arch/clock.h>
 #include <asm/arch/iomux.h>
 #include <asm/gpio.h>
 #include <asm/arch/sys_proto.h>
@@ -43,7 +44,7 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-static struct fb_videomode nec_nl6448bc26_09c = {
+static struct fb_videomode const nec_nl6448bc26_09c = {
 	"NEC_NL6448BC26-09C",
 	60,	/* Refresh */
 	640,	/* xres */
@@ -590,6 +591,7 @@ int board_mmc_init(bd_t *bis)
 	mxc_iomux_set_pad(MX51_PIN_GPIO1_1,
 		PAD_CTL_HYS_ENABLE);
 
+	esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
 	return fsl_esdhc_initialize(bis, &esdhc_cfg[0]);
 }
 #endif

boards.cfg

@@ -225,7 +225,12 @@ versatileqemu                arm         arm926ejs   versatile           armltd
 integratorap_cm946es         arm         arm946es    integrator          armltd         -               integratorap:CM946ES
 integratorcp_cm946es         arm         arm946es    integrator          armltd         -               integratorcp:CM946ES
 ca9x4_ct_vxp                 arm         armv7       vexpress            armltd
-am335x_evm                   arm         armv7       am335x              ti             am33xx
+am335x_evm                   arm         armv7       am335x              ti             am33xx      am335x_evm:SERIAL1,CONS_INDEX=1
+am335x_evm_uart1             arm         armv7       am335x              ti             am33xx      am335x_evm:SERIAL2,CONS_INDEX=2
+am335x_evm_uart2             arm         armv7       am335x              ti             am33xx      am335x_evm:SERIAL3,CONS_INDEX=3
+am335x_evm_uart3             arm         armv7       am335x              ti             am33xx      am335x_evm:SERIAL4,CONS_INDEX=4
+am335x_evm_uart4             arm         armv7       am335x              ti             am33xx      am335x_evm:SERIAL5,CONS_INDEX=5
+am335x_evm_uart5             arm         armv7       am335x              ti             am33xx      am335x_evm:SERIAL6,CONS_INDEX=6
 highbank                     arm         armv7       highbank            -              highbank
 mx51_efikamx                 arm         armv7       mx51_efikamx        genesi         mx5		mx51_efikamx:MACH_TYPE=MACH_TYPE_MX51_EFIKAMX,IMX_CONFIG=board/genesi/mx51_efikamx/imximage_mx.cfg
 mx51_efikasb                 arm         armv7       mx51_efikamx        genesi         mx5		mx51_efikamx:MACH_TYPE=MACH_TYPE_MX51_EFIKASB,IMX_CONFIG=board/genesi/mx51_efikamx/imximage_sb.cfg
@@ -240,6 +245,7 @@ mx6qarm2                     arm         armv7       mx6qarm2            freesca
 mx6qsabreauto                arm         armv7       mx6qsabreauto       freescale      mx6		mx6qsabreauto:IMX_CONFIG=board/freescale/mx6qsabreauto/imximage.cfg
 mx6qsabrelite                arm         armv7       mx6qsabrelite       freescale      mx6		mx6qsabrelite:IMX_CONFIG=board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg
 mx6qsabresd                  arm         armv7       mx6qsabresd         freescale      mx6		mx6qsabresd:IMX_CONFIG=board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg
+eco5pk                       arm         armv7       eco5pk              8dtech         omap3
 cm_t35                       arm         armv7       cm_t35              -              omap3
 omap3_overo                  arm         armv7       overo               -              omap3
 omap3_pandora                arm         armv7       pandora             -              omap3
@@ -264,6 +270,7 @@ devkit8000                   arm         armv7       devkit8000          timll
 mcx                          arm         armv7       mcx                 htkw           omap3
 tricorder                    arm         armv7       tricorder           corscience     omap3
 twister                      arm         armv7       twister             technexion     omap3
+nokia_rx51                   arm         armv7       rx51                nokia          omap3
 omap4_panda                  arm         armv7       panda               ti             omap4
 omap4_sdp4430                arm         armv7       sdp4430             ti             omap4
 omap5_evm                    arm         armv7       omap5_evm           ti		omap5
@@ -278,6 +285,7 @@ harmony                      arm         armv7:arm720t harmony           nvidia
 seaboard                     arm         armv7:arm720t seaboard          nvidia         tegra20
 ventana                      arm         armv7:arm720t ventana           nvidia         tegra20
 whistler                     arm         armv7:arm720t whistler          nvidia         tegra20
+colibri_t20_iris             arm         armv7:arm720t colibri_t20_iris  toradex        tegra20
 u8500_href                   arm         armv7       u8500               st-ericsson    u8500
 snowball                     arm         armv7       snowball               st-ericsson    u8500
 kzm9g                        arm         armv7       kzm9g               kmc            rmobile

common/spl/spl.c

@@ -113,13 +113,13 @@ void spl_parse_image_header(const struct image_header *header)
 	}
 }
 
-static void __noreturn jump_to_image_no_args(void)
+__weak void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image)
 {
 	typedef void __noreturn (*image_entry_noargs_t)(u32 *);
 	image_entry_noargs_t image_entry =
-			(image_entry_noargs_t) spl_image.entry_point;
+			(image_entry_noargs_t) spl_image->entry_point;
 
-	debug("image entry point: 0x%X\n", spl_image.entry_point);
+	debug("image entry point: 0x%X\n", spl_image->entry_point);
 	/* Pass the saved boot_params from rom code */
 #if defined(CONFIG_VIRTIO) || defined(CONFIG_ZEBU)
 	image_entry = (image_entry_noargs_t)0x80100000;
@@ -223,7 +223,7 @@ void board_init_r(gd_t *dummy1, ulong dummy2)
 	default:
 		debug("Unsupported OS image.. Jumping nevertheless..\n");
 	}
-	jump_to_image_no_args();
+	jump_to_image_no_args(&spl_image);
 }
 
 /*

doc/README.nokia_rx51

@@ -0,0 +1,104 @@
+Board: Nokia RX-51 aka N900
+
+This board definition results in a u-boot.bin which can be chainloaded
+from NOLO in qemu or on a real N900. It does very little hardware config
+because NOLO has already configured the board. Only needed is enabling
+internal eMMC memory via twl4030 regulator which is not enabled by NOLO.
+
+NOLO is expecting a kernel image and will treat any image it finds in
+onenand as such. This u-boot is intended to be flashed to the N900 like
+a kernel. In order to transparently boot the original kernel, it will be
+appended to u-boot.bin at 0x40000. NOLO will load the entire image into
+(random) memory and execute u-boot, which saves hw revision, boot reason
+and boot mode ATAGs set by NOLO. Then the bootscripts will attempt to load
+uImage or boot.scr from a fat, ext2/ext3 or ext4 filesystem in external
+SD card or internal eMMC memory. If this fails or keyboard is closed then
+the appended kernel image will be booted using some generated and some
+stored ATAGs (see boot order).
+
+There is support for hardware watchdog. Hardware watchdog is started by
+NOLO so u-boot must kick watchdog to prevent reboot device (but not very
+often, max every 2 seconds). There is also support for framebuffer display
+output with ANSI espace codes and the N900 HW keyboard input. USB tty works
+but is disabled because it prevents the current Maemo kernel from booting.
+
+When U-Boot is starting it enable IBE bit in Auxiliary Control Register,
+which is needed for Thumb-2 ISA support. It is workaround for errata 430973.
+
+Default boot order:
+
+ * 0. if keyboard is closed boot automatically attached kernel image
+ * 1. try boot from external SD card
+ * 2. try boot from internal eMMC memory
+ * 3. try boot from attached kernel image
+
+Boot from SD or eMMC in this order:
+
+ * 1.
+   * 1.1 find boot.scr on first fat partition
+   * 1.2 find uImage on first fat parition
+   * 1.3 same order for 2. - 4. fat partition
+ * 2. same as 1. but for ext2/3 partition
+ * 3. same as 1. but for ext4 partition
+
+
+Available additional commands/variables:
+
+ * run sercon - Use serial port for control
+ * run usbcon - Use usbtty for control
+ * run vgacon - Use framebuffer and HW keyboard for control (default)
+
+ * run sdboot - Boot from external SD card (see boot order)
+ * run emmcboot - Boot from internal eMMC memory (see boot order)
+ * run attachboot - Boot attached kernel image (attached to U-Boot binary)
+
+ * run scriptload - Load boot script ${mmcscriptfile}
+ * run scriptboot - Run loaded boot script
+ * run kernload - Load kernel image ${mmckernfile}
+ * run initrdload - Load initrd image ${mmcinitrdfile}
+ * run kernboot - Boot loaded kernel image
+ * run kerninitrdboot - Boot loaded kernel image with loaded initrd image
+
+ * run trymmcscriptboot - Try to load and boot script ${mmcscriptfile}
+ * run trymmckernboot - Try to load and boot kernel image ${mmckernfile}
+ * run trymmckerninitrdboot - Try to load and boot kernel image ${mmckernfile}
+                              with initrd image ${mmcinitrdfile}
+
+Additional variables for loading files from mmc:
+
+ * mmc ${mmcnum} (0 - external, 1 - internal)
+ * partition number ${mmcpart} (1 - 4)
+ * parition type ${mmctype} (fat, ext2)
+
+Additional varuables for booting kernel:
+
+ * setup_omap_atag - Add OMAP table into atags structure (needs maemo kernel)
+ * setup_console_atag - Enable serial console in OMAP table
+ * setup_boot_reason_atag - Change boot reason in OMAP table
+ * setup_boot_mode_atag - Change boot mode in OMAP table
+
+USB TTY:
+
+ Maemo kernel 2.6.28 will crash if u-boot enable usb tty. So USB TTY is disabled.
+ For enabling USB TTY just add this line to file include/configs/nokia_rx51.h
+
+ #define CONFIG_USB_TTY
+
+
+ONENAND support:
+
+ ONENAND support is disabled because not working yet and cause linux kernel to
+ crash or no access to mtd. For enabling ONENAND support add this line at begin
+ of file include/configs/nokia_rx51.h
+
+ #define ONENAND_SUPPORT
+
+
+UBIFS support:
+
+ UBIFS support is disabled, because U-Boot image is too big and cannot be
+ flashed with attached zImage to RX-51 kernel nand area. For enabling UBIFS
+ support first enable ONENAND support and then add this line at begin of file
+ include/configs/nokia_rx51.h
+
+ #define UBIFS_SUPPORT

drivers/mmc/fsl_esdhc.c

@@ -412,10 +412,10 @@ esdhc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data)
 
 static void set_sysctl(struct mmc *mmc, uint clock)
 {
-	int sdhc_clk = gd->sdhc_clk;
 	int div, pre_div;
 	struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
 	volatile struct fsl_esdhc *regs = (struct fsl_esdhc *)cfg->esdhc_base;
+	int sdhc_clk = cfg->sdhc_clk;
 	uint clk;
 
 	if (clock < mmc->f_min)
@@ -598,6 +598,7 @@ int fsl_esdhc_mmc_init(bd_t *bis)
 	cfg = malloc(sizeof(struct fsl_esdhc_cfg));
 	memset(cfg, 0, sizeof(struct fsl_esdhc_cfg));
 	cfg->esdhc_base = CONFIG_SYS_FSL_ESDHC_ADDR;
+	cfg->sdhc_clk = gd->sdhc_clk;
 	return fsl_esdhc_initialize(bis, cfg);
 }
 

drivers/mtd/nand/tegra_nand.c

@@ -218,6 +218,34 @@ static uint8_t read_byte(struct mtd_info *mtd)
 	return (uint8_t)dword_read;
 }
 
+/**
+ * Read len bytes from the chip into a buffer
+ *
+ * @param mtd	MTD device structure
+ * @param buf	buffer to store data to
+ * @param len	number of bytes to read
+ *
+ * Read function for 8bit bus-width
+ */
+static void read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
+{
+	int i, s;
+	unsigned int reg;
+	struct nand_chip *chip = mtd->priv;
+	struct nand_drv *info = (struct nand_drv *)chip->priv;
+
+	for (i = 0; i < len; i += 4) {
+		s = (len - i) > 4 ? 4 : len - i;
+		writel(CMD_PIO | CMD_RX | CMD_A_VALID | CMD_CE0 |
+			((s - 1) << CMD_TRANS_SIZE_SHIFT) | CMD_GO,
+			&info->reg->command);
+		if (!nand_waitfor_cmd_completion(info->reg))
+			puts("Command timeout during read_buf\n");
+		reg = readl(&info->reg->resp);
+		memcpy(buf + i, &reg, s);
+	}
+}
+
 /**
  * Check NAND status to see if it is ready or not
  *
@@ -317,6 +345,7 @@ static void nand_command(struct mtd_info *mtd, unsigned int command,
 	switch (command) {
 	case NAND_CMD_READID:
 		writel(NAND_CMD_READID, &info->reg->cmd_reg1);
+		writel(column & 0xFF, &info->reg->addr_reg1);
 		writel(CMD_GO | CMD_CLE | CMD_ALE | CMD_PIO
 			| CMD_RX |
 			((4 - 1) << CMD_TRANS_SIZE_SHIFT)
@@ -324,6 +353,12 @@ static void nand_command(struct mtd_info *mtd, unsigned int command,
 			&info->reg->command);
 		info->pio_byte_index = 0;
 		break;
+	case NAND_CMD_PARAM:
+		writel(NAND_CMD_PARAM, &info->reg->cmd_reg1);
+		writel(column & 0xFF, &info->reg->addr_reg1);
+		writel(CMD_GO | CMD_CLE | CMD_ALE | CMD_CE0,
+			&info->reg->command);
+		break;
 	case NAND_CMD_READ0:
 		writel(NAND_CMD_READ0, &info->reg->cmd_reg1);
 		writel(NAND_CMD_READSTART, &info->reg->cmd_reg2);
@@ -976,6 +1011,7 @@ int tegra_nand_init(struct nand_chip *nand, int devnum)
 	nand->options = LP_OPTIONS;
 	nand->cmdfunc = nand_command;
 	nand->read_byte = read_byte;
+	nand->read_buf = read_buf;
 	nand->ecc.read_page = nand_read_page_hwecc;
 	nand->ecc.write_page = nand_write_page_hwecc;
 	nand->ecc.read_page_raw = nand_read_page_raw;

drivers/serial/serial_ns16550.c

@@ -34,7 +34,7 @@
 DECLARE_GLOBAL_DATA_PTR;
 
 #if !defined(CONFIG_CONS_INDEX)
-#elif (CONFIG_CONS_INDEX < 1) || (CONFIG_CONS_INDEX > 4)
+#elif (CONFIG_CONS_INDEX < 1) || (CONFIG_CONS_INDEX > 6)
 #error	"Invalid console index value."
 #endif
 
@@ -46,12 +46,16 @@ DECLARE_GLOBAL_DATA_PTR;
 #error	"Console port 3 defined but not configured."
 #elif CONFIG_CONS_INDEX == 4 && !defined(CONFIG_SYS_NS16550_COM4)
 #error	"Console port 4 defined but not configured."
+#elif CONFIG_CONS_INDEX == 5 && !defined(CONFIG_SYS_NS16550_COM5)
+#error	"Console port 5 defined but not configured."
+#elif CONFIG_CONS_INDEX == 6 && !defined(CONFIG_SYS_NS16550_COM6)
+#error	"Console port 6 defined but not configured."
 #endif
 
 /* Note: The port number specified in the functions is 1 based.
  *	 the array is 0 based.
  */
-static NS16550_t serial_ports[4] = {
+static NS16550_t serial_ports[6] = {
 #ifdef CONFIG_SYS_NS16550_COM1
 	(NS16550_t)CONFIG_SYS_NS16550_COM1,
 #else
@@ -68,7 +72,17 @@ static NS16550_t serial_ports[4] = {
 	NULL,
 #endif
 #ifdef CONFIG_SYS_NS16550_COM4
-	(NS16550_t)CONFIG_SYS_NS16550_COM4
+	(NS16550_t)CONFIG_SYS_NS16550_COM4,
+#else
+	NULL,
+#endif
+#ifdef CONFIG_SYS_NS16550_COM5
+	(NS16550_t)CONFIG_SYS_NS16550_COM5,
+#else
+	NULL,
+#endif
+#ifdef CONFIG_SYS_NS16550_COM6
+	(NS16550_t)CONFIG_SYS_NS16550_COM6
 #else
 	NULL
 #endif
@@ -243,6 +257,12 @@ struct serial_device eserial3_device =
 DECLARE_ESERIAL_FUNCTIONS(4);
 struct serial_device eserial4_device =
 	INIT_ESERIAL_STRUCTURE(4, "eserial3");
+DECLARE_ESERIAL_FUNCTIONS(5);
+struct serial_device eserial5_device =
+	INIT_ESERIAL_STRUCTURE(5, "eserial4");
+DECLARE_ESERIAL_FUNCTIONS(6);
+struct serial_device eserial6_device =
+	INIT_ESERIAL_STRUCTURE(6, "eserial5");
 
 __weak struct serial_device *default_serial_console(void)
 {
@@ -254,6 +274,10 @@ __weak struct serial_device *default_serial_console(void)
 	return &eserial3_device;
 #elif CONFIG_CONS_INDEX == 4
 	return &eserial4_device;
+#elif CONFIG_CONS_INDEX == 5
+	return &eserial5_device;
+#elif CONFIG_CONS_INDEX == 6
+	return &eserial6_device;
 #else
 #error "Bad CONFIG_CONS_INDEX."
 #endif
@@ -273,4 +297,10 @@ void ns16550_serial_initialize(void)
 #if defined(CONFIG_SYS_NS16550_COM4)
 	serial_register(&eserial4_device);
 #endif
+#if defined(CONFIG_SYS_NS16550_COM5)
+	serial_register(&eserial5_device);
+#endif
+#if defined(CONFIG_SYS_NS16550_COM6)
+	serial_register(&eserial6_device);
+#endif
 }

drivers/video/cfb_console.c

@@ -385,6 +385,13 @@ static u32 eorx, fgx, bgx;	/* color pats */
 
 static int cfb_do_flush_cache;
 
+#ifdef CONFIG_CFB_CONSOLE_ANSI
+static char ansi_buf[10];
+static int ansi_buf_size;
+static int ansi_colors_need_revert;
+static int ansi_cursor_hidden;
+#endif
+
 static const int video_font_draw_table8[] = {
 	0x00000000, 0x000000ff, 0x0000ff00, 0x0000ffff,
 	0x00ff0000, 0x00ff00ff, 0x00ffff00, 0x00ffffff,
@@ -768,9 +775,97 @@ static void console_back(void)
 	}
 }
 
-static void console_newline(void)
+#ifdef CONFIG_CFB_CONSOLE_ANSI
+
+static void console_clear(void)
+{
+#ifdef VIDEO_HW_RECTFILL
+	video_hw_rectfill(VIDEO_PIXEL_SIZE,	/* bytes per pixel */
+			  0,			/* dest pos x */
+			  video_logo_height,	/* dest pos y */
+			  VIDEO_VISIBLE_COLS,	/* frame width */
+			  VIDEO_VISIBLE_ROWS,	/* frame height */
+			  bgx			/* fill color */
+	);
+#else
+	memsetl(CONSOLE_ROW_FIRST, CONSOLE_SIZE, bgx);
+#endif
+}
+
+static void console_cursor_fix(void)
+{
+	if (console_row < 0)
+		console_row = 0;
+	if (console_row >= CONSOLE_ROWS)
+		console_row = CONSOLE_ROWS - 1;
+	if (console_col < 0)
+		console_col = 0;
+	if (console_col >= CONSOLE_COLS)
+		console_col = CONSOLE_COLS - 1;
+}
+
+static void console_cursor_up(int n)
+{
+	console_row -= n;
+	console_cursor_fix();
+}
+
+static void console_cursor_down(int n)
+{
+	console_row += n;
+	console_cursor_fix();
+}
+
+static void console_cursor_left(int n)
+{
+	console_col -= n;
+	console_cursor_fix();
+}
+
+static void console_cursor_right(int n)
+{
+	console_col += n;
+	console_cursor_fix();
+}
+
+static void console_cursor_set_position(int row, int col)
+{
+	if (console_row != -1)
+		console_row = row;
+	if (console_col != -1)
+		console_col = col;
+	console_cursor_fix();
+}
+
+static void console_previousline(int n)
 {
-	console_row++;
+	/* FIXME: also scroll terminal ? */
+	console_row -= n;
+	console_cursor_fix();
+}
+
+static void console_swap_colors(void)
+{
+	eorx = fgx;
+	fgx = bgx;
+	bgx = eorx;
+	eorx = fgx ^ bgx;
+}
+
+static inline int console_cursor_is_visible(void)
+{
+	return !ansi_cursor_hidden;
+}
+#else
+static inline int console_cursor_is_visible(void)
+{
+	return 1;
+}
+#endif
+
+static void console_newline(int n)
+{
+	console_row += n;
 	console_col = 0;
 
 	/* Check if we need to scroll the terminal */
@@ -779,7 +874,7 @@ static void console_newline(void)
 		console_scrollup();
 
 		/* Decrement row number */
-		console_row--;
+		console_row = CONSOLE_ROWS - 1;
 	}
 }
 
@@ -788,11 +883,12 @@ static void console_cr(void)
 	console_col = 0;
 }
 
-void video_putc(const char c)
+static void parse_putc(const char c)
 {
 	static int nl = 1;
 
-	CURSOR_OFF;
+	if (console_cursor_is_visible())
+		CURSOR_OFF;
 
 	switch (c) {
 	case 13:		/* back to first column */
@@ -801,7 +897,7 @@ void video_putc(const char c)
 
 	case '\n':		/* next line */
 		if (console_col || (!console_col && nl))
-			console_newline();
+			console_newline(1);
 		nl = 1;
 		break;
 
@@ -810,7 +906,7 @@ void video_putc(const char c)
 		console_col &= ~0x0007;
 
 		if (console_col >= CONSOLE_COLS)
-			console_newline();
+			console_newline(1);
 		break;
 
 	case 8:		/* backspace */
@@ -827,11 +923,225 @@ void video_putc(const char c)
 
 		/* check for newline */
 		if (console_col >= CONSOLE_COLS) {
-			console_newline();
+			console_newline(1);
 			nl = 0;
 		}
 	}
-	CURSOR_SET;
+
+	if (console_cursor_is_visible())
+		CURSOR_SET;
+}
+
+void video_putc(const char c)
+{
+#ifdef CONFIG_CFB_CONSOLE_ANSI
+	int i;
+
+	if (c == 27) {
+		for (i = 0; i < ansi_buf_size; ++i)
+			parse_putc(ansi_buf[i]);
+		ansi_buf[0] = 27;
+		ansi_buf_size = 1;
+		return;
+	}
+
+	if (ansi_buf_size > 0) {
+		/*
+		 * 0 - ESC
+		 * 1 - [
+		 * 2 - num1
+		 * 3 - ..
+		 * 4 - ;
+		 * 5 - num2
+		 * 6 - ..
+		 * - cchar
+		 */
+		int next = 0;
+
+		int flush = 0;
+		int fail = 0;
+
+		int num1 = 0;
+		int num2 = 0;
+		int cchar = 0;
+
+		ansi_buf[ansi_buf_size++] = c;
+
+		if (ansi_buf_size >= sizeof(ansi_buf))
+			fail = 1;
+
+		for (i = 0; i < ansi_buf_size; ++i) {
+			if (fail)
+				break;
+
+			switch (next) {
+			case 0:
+				if (ansi_buf[i] == 27)
+					next = 1;
+				else
+					fail = 1;
+				break;
+
+			case 1:
+				if (ansi_buf[i] == '[')
+					next = 2;
+				else
+					fail = 1;
+				break;
+
+			case 2:
+				if (ansi_buf[i] >= '0' && ansi_buf[i] <= '9') {
+					num1 = ansi_buf[i]-'0';
+					next = 3;
+				} else if (ansi_buf[i] != '?') {
+					--i;
+					num1 = 1;
+					next = 4;
+				}
+				break;
+
+			case 3:
+				if (ansi_buf[i] >= '0' && ansi_buf[i] <= '9') {
+					num1 *= 10;
+					num1 += ansi_buf[i]-'0';
+				} else {
+					--i;
+					next = 4;
+				}
+				break;
+
+			case 4:
+				if (ansi_buf[i] != ';') {
+					--i;
+					next = 7;
+				} else
+					next = 5;
+				break;
+
+			case 5:
+				if (ansi_buf[i] >= '0' && ansi_buf[i] <= '9') {
+					num2 = ansi_buf[i]-'0';
+					next = 6;
+				} else
+					fail = 1;
+				break;
+
+			case 6:
+				if (ansi_buf[i] >= '0' && ansi_buf[i] <= '9') {
+					num2 *= 10;
+					num2 += ansi_buf[i]-'0';
+				} else {
+					--i;
+					next = 7;
+				}
+				break;
+
+			case 7:
+				if ((ansi_buf[i] >= 'A' && ansi_buf[i] <= 'H')
+					|| ansi_buf[i] == 'J'
+					|| ansi_buf[i] == 'K'
+					|| ansi_buf[i] == 'h'
+					|| ansi_buf[i] == 'l'
+					|| ansi_buf[i] == 'm') {
+					cchar = ansi_buf[i];
+					flush = 1;
+				} else
+					fail = 1;
+				break;
+			}
+		}
+
+		if (fail) {
+			for (i = 0; i < ansi_buf_size; ++i)
+				parse_putc(ansi_buf[i]);
+			ansi_buf_size = 0;
+			return;
+		}
+
+		if (flush) {
+			if (!ansi_cursor_hidden)
+				CURSOR_OFF;
+			ansi_buf_size = 0;
+			switch (cchar) {
+			case 'A':
+				/* move cursor num1 rows up */
+				console_cursor_up(num1);
+				break;
+			case 'B':
+				/* move cursor num1 rows down */
+				console_cursor_down(num1);
+				break;
+			case 'C':
+				/* move cursor num1 columns forward */
+				console_cursor_right(num1);
+				break;
+			case 'D':
+				/* move cursor num1 columns back */
+				console_cursor_left(num1);
+				break;
+			case 'E':
+				/* move cursor num1 rows up at begin of row */
+				console_previousline(num1);
+				break;
+			case 'F':
+				/* move cursor num1 rows down at begin of row */
+				console_newline(num1);
+				break;
+			case 'G':
+				/* move cursor to column num1 */
+				console_cursor_set_position(-1, num1-1);
+				break;
+			case 'H':
+				/* move cursor to row num1, column num2 */
+				console_cursor_set_position(num1-1, num2-1);
+				break;
+			case 'J':
+				/* clear console and move cursor to 0, 0 */
+				console_clear();
+				console_cursor_set_position(0, 0);
+				break;
+			case 'K':
+				/* clear line */
+				if (num1 == 0)
+					console_clear_line(console_row,
+							console_col,
+							CONSOLE_COLS-1);
+				else if (num1 == 1)
+					console_clear_line(console_row,
+							0, console_col);
+				else
+					console_clear_line(console_row,
+							0, CONSOLE_COLS-1);
+				break;
+			case 'h':
+				ansi_cursor_hidden = 0;
+				break;
+			case 'l':
+				ansi_cursor_hidden = 1;
+				break;
+			case 'm':
+				if (num1 == 0) { /* reset swapped colors */
+					if (ansi_colors_need_revert) {
+						console_swap_colors();
+						ansi_colors_need_revert = 0;
+					}
+				} else if (num1 == 7) { /* once swap colors */
+					if (!ansi_colors_need_revert) {
+						console_swap_colors();
+						ansi_colors_need_revert = 1;
+					}
+				}
+				break;
+			}
+			if (!ansi_cursor_hidden)
+				CURSOR_SET;
+		}
+	} else {
+		parse_putc(c);
+	}
+#else
+	parse_putc(c);
+#endif
 }
 
 void video_puts(const char *s)

drivers/video/mxc_ipuv3_fb.c

@@ -45,7 +45,7 @@ static int mxcfb_unmap_video_memory(struct fb_info *fbi);
 
 /* graphics setup */
 static GraphicDevice panel;
-static struct fb_videomode *gmode;
+static struct fb_videomode const *gmode;
 static uint8_t gdisp;
 static uint32_t gpixfmt;
 
@@ -503,7 +503,7 @@ static struct fb_info *mxcfb_init_fbinfo(void)
  * @return      Appropriate error code to the kernel common code
  */
 static int mxcfb_probe(u32 interface_pix_fmt, uint8_t disp,
-			struct fb_videomode *mode)
+			struct fb_videomode const *mode)
 {
 	struct fb_info *fbi;
 	struct mxcfb_info *mxcfbi;
@@ -619,7 +619,9 @@ void video_set_lut(unsigned int index, /* color number */
 	return;
 }
 
-int ipuv3_fb_init(struct fb_videomode *mode, uint8_t disp, uint32_t pixfmt)
+int ipuv3_fb_init(struct fb_videomode const *mode,
+		  uint8_t disp,
+		  uint32_t pixfmt)
 {
 	gmode = mode;
 	gdisp = disp;

include/configs/am335x_evm.h

@@ -169,9 +169,15 @@
 /* NS16550 Configuration */
 #define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SERIAL_MULTI
 #define CONFIG_SYS_NS16550_REG_SIZE	(-4)
 #define CONFIG_SYS_NS16550_CLK		(48000000)
 #define CONFIG_SYS_NS16550_COM1		0x44e09000	/* Base EVM has UART0 */
+#define CONFIG_SYS_NS16550_COM2		0x48022000	/* UART1 */
+#define CONFIG_SYS_NS16550_COM3		0x48024000	/* UART2 */
+#define CONFIG_SYS_NS16550_COM4		0x481a6000	/* UART3 */
+#define CONFIG_SYS_NS16550_COM5		0x481a8000	/* UART4 */
+#define CONFIG_SYS_NS16550_COM6		0x481aa000	/* UART5 */
 
 /* I2C Configuration */
 #define CONFIG_I2C
@@ -193,11 +199,7 @@
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 110, 300, 600, 1200, 2400, \
 4800, 9600, 14400, 19200, 28800, 38400, 56000, 57600, 115200 }
 
-/*
- * select serial console configuration
- */
-#define CONFIG_SERIAL1			1
-#define CONFIG_CONS_INDEX		1
+#define CONFIG_ENV_OVERWRITE		1
 #define CONFIG_SYS_CONSOLE_INFO_QUIET
 
 #define CONFIG_ENV_IS_NOWHERE

include/configs/colibri_t20_iris.h

@@ -0,0 +1,83 @@
+/*
+ *  Copyright (C) 2012 Lucas Stach
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include "tegra20-common.h"
+
+/* Enable FDT support */
+#define CONFIG_DEFAULT_DEVICE_TREE	tegra20-colibri_t20_iris
+#define CONFIG_OF_CONTROL
+#define CONFIG_OF_SEPARATE
+
+/* High-level configuration options */
+#define V_PROMPT                   "Tegra20 (Colibri) # "
+#define CONFIG_TEGRA_BOARD_STRING  "Toradex Colibri T20 on Iris"
+
+/* Board-specific serial config */
+#define CONFIG_TEGRA_ENABLE_UARTA
+#define CONFIG_TEGRA_UARTA_SDIO1
+#define CONFIG_SYS_NS16550_COM1    NV_PA_APB_UARTA_BASE
+
+#define CONFIG_BOARD_EARLY_INIT_F
+
+/* SD/MMC support */
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_TEGRA_MMC
+#define CONFIG_CMD_MMC
+
+/* File system support */
+#define CONFIG_DOS_PARTITION
+#define CONFIG_EFI_PARTITION
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+
+/* USB host support */
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_TEGRA
+#define CONFIG_USB_ULPI
+#define CONFIG_USB_ULPI_VIEWPORT
+#define CONFIG_USB_STORAGE
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 3
+#define CONFIG_CMD_USB
+
+/* USB networking support */
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_ASIX
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PING
+
+/* NAND support */
+#define CONFIG_CMD_NAND
+#define CONFIG_TEGRA_NAND
+#define CONFIG_SYS_MAX_NAND_DEVICE     1
+
+/* Environment in NAND, 64K is a bit excessive but erase block is 512K anyway */
+#define CONFIG_ENV_IS_IN_NAND
+#define CONFIG_ENV_OFFSET              (SZ_2M)
+#undef  CONFIG_ENV_SIZE /* undef size from tegra20-common.h */
+#define CONFIG_ENV_SIZE                (SZ_64K)
+
+/* Debug commands */
+#define CONFIG_CMD_BDI
+#define CONFIG_CMD_CACHE
+
+#include "tegra-common-post.h"
+
+#endif /* __CONFIG_H */

include/configs/eb_cpux9k2.h

@@ -43,6 +43,10 @@
 
 #define MACH_TYPE_EB_CPUX9K2		1977
 #define CONFIG_MACH_TYPE		MACH_TYPE_EB_CPUX9K2
+
+#define CONFIG_SYS_CACHELINE_SIZE	32
+#define CONFIG_SYS_DCACHE_OFF
+
 /*--------------------------------------------------------------------------*/
 #ifndef CONFIG_RAMBOOT
 #define CONFIG_SYS_TEXT_BASE		0x00000000
@@ -56,7 +60,6 @@
 #define CONFIG_SYS_U_BOOT_BASE		PHYS_FLASH_1
 #define CONFIG_SYS_U_BOOT_SIZE		0x60000 /* 384 KBytes */
 
-
 #define CONFIG_BOOT_RETRY_TIME		30
 #define CONFIG_CMDLINE_EDITING
 

include/configs/eco5pk.h

@@ -0,0 +1,81 @@
+/*
+ * Copyright (C) 2012 8D Technologies inc.
+ * Based on mt_ventoux.h, original banner below:
+ *
+ * Copyright (C) 2011
+ * Stefano Babic, DENX Software Engineering, sbabic@denx.de.
+ *
+ * Copyright (C) 2009 TechNexion Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include "tam3517-common.h"
+
+#undef CONFIG_USB_EHCI
+#undef CONFIG_USB_EHCI_OMAP
+#undef CONFIG_USB_OMAP3
+#undef CONFIG_CMD_USB
+
+/* Our console port is port3 */
+#undef CONFIG_CONS_INDEX
+#undef CONFIG_SYS_NS16550_COM1
+#undef CONFIG_SERIAL1
+
+#define CONFIG_CONS_INDEX	3
+#define CONFIG_SYS_NS16550_COM3	OMAP34XX_UART3
+#define CONFIG_SERIAL3
+
+#define MACH_TYPE_ECO5_PK	4017
+#define CONFIG_MACH_TYPE	MACH_TYPE_ECO5_PK
+
+#define CONFIG_BOOTDELAY	10
+#define CONFIG_BOOTFILE		"uImage"
+#define CONFIG_AUTO_COMPLETE
+
+/*
+ * Miscellaneous configurable options
+ */
+#define V_PROMPT		"ECO5-PK # "
+#define CONFIG_SYS_PROMPT	V_PROMPT
+
+/*
+ * Set its own mtdparts, different from common
+ */
+#undef MTDIDS_DEFAULT
+#undef MTDPARTS_DEFAULT
+#define MTDIDS_DEFAULT		"nand0=omap2-nand.0"
+#define MTDPARTS_DEFAULT	"mtdparts=omap2-nand.0:512k(xloader-nand)," \
+				"1024k(uboot-nand),256k(params-nand)," \
+				"5120k(kernel),-(ubifs)"
+
+/*
+ * The arithmetic in tam3517.h is wrong for us and the kernel gets overwritten.
+ */
+#undef CONFIG_ENV_OFFSET_REDUND
+#define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET + \
+						CONFIG_SYS_ENV_SECT_SIZE)
+
+#define	CONFIG_EXTRA_ENV_SETTINGS	CONFIG_TAM3517_SETTINGS \
+	"install_kernel=if dhcp $bootfile; then nand erase kernel;" \
+				"nand write $fileaddr kernel; fi\0" \
+	"mtdparts="MTDPARTS_DEFAULT"\0" \
+	"serverip=192.168.142.60\0"
+
+
+#endif /* __CONFIG_H */

include/configs/harmony.h

@@ -72,8 +72,11 @@
 #define CONFIG_ENV_OFFSET	(SZ_512M - SZ_128K) /* 128K sector size */
 
 /* USB Host support */
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 3
 #define CONFIG_USB_EHCI
 #define CONFIG_USB_EHCI_TEGRA
+#define CONFIG_USB_ULPI
+#define CONFIG_USB_ULPI_VIEWPORT
 #define CONFIG_USB_STORAGE
 #define CONFIG_CMD_USB
 

include/configs/mx25pdk.h

@@ -15,6 +15,8 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#include <asm/arch/imx-regs.h>
+
 /* High Level Configuration Options */
 
 #define CONFIG_SYS_HZ			1000
@@ -41,8 +43,13 @@
 #define CONFIG_BOARD_EARLY_INIT_F
 
 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x1000 - \
-						GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_ADDR	IMX_RAM_BASE
+#define CONFIG_SYS_INIT_RAM_SIZE	IMX_RAM_SIZE
+
+#define CONFIG_SYS_INIT_SP_OFFSET \
+	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR \
+	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 
 /* Memory Test */
 #define CONFIG_SYS_MEMTEST_START	(PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE/2)

include/configs/mx51evk.h

@@ -96,7 +96,6 @@
 /*
  * Eth Configs
  */
-#define CONFIG_HAS_ETH1
 #define CONFIG_MII
 
 #define CONFIG_FEC_MXC

include/configs/mx53evk.h

@@ -73,7 +73,6 @@
 #define CONFIG_DOS_PARTITION
 
 /* Eth Configs */
-#define CONFIG_HAS_ETH1
 #define CONFIG_MII
 
 #define CONFIG_FEC_MXC

include/configs/mx53loco.h

@@ -58,7 +58,6 @@
 #define CONFIG_DOS_PARTITION
 
 /* Eth Configs */
-#define CONFIG_HAS_ETH1
 #define CONFIG_MII
 
 #define CONFIG_FEC_MXC
@@ -222,6 +221,6 @@
 #define CONFIG_SPLASH_SCREEN
 #define CONFIG_BMP_16BPP
 #define CONFIG_VIDEO_LOGO
-#define CONFIG_IPUV3_CLK	133000000
+#define CONFIG_IPUV3_CLK	200000000
 
 #endif				/* __CONFIG_H */

include/configs/mx6qarm2.h

@@ -50,6 +50,7 @@
 #define CONFIG_MMC
 #define CONFIG_CMD_MMC
 #define CONFIG_GENERIC_MMC
+#define CONFIG_MMC_BOUNCE_BUFFER
 #define CONFIG_CMD_FAT
 #define CONFIG_DOS_PARTITION
 
@@ -164,6 +165,4 @@
 #define CONFIG_OF_LIBFDT
 #define CONFIG_CMD_BOOTZ
 
-#define CONFIG_SYS_DCACHE_OFF
-
 #endif				/* __CONFIG_H */

include/configs/mx6qsabre_common.h

@@ -45,6 +45,7 @@
 #define CONFIG_MMC
 #define CONFIG_CMD_MMC
 #define CONFIG_GENERIC_MMC
+#define CONFIG_MMC_BOUNCE_BUFFER
 #define CONFIG_CMD_EXT2
 #define CONFIG_CMD_FAT
 #define CONFIG_DOS_PARTITION
@@ -86,7 +87,7 @@
 	"initrd_high=0xffffffff\0" \
 	"mmcdev=0\0" \
 	"mmcpart=1\0" \
-	"mmcroot=/dev/mmcblk1p2 rootwait rw\0" \
+	"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
 	"mmcargs=setenv bootargs console=${console},${baudrate} " \
 		"root=${mmcroot}\0" \
 	"loadbootscript=" \
@@ -168,8 +169,6 @@
 
 #define CONFIG_OF_LIBFDT
 
-#define CONFIG_SYS_DCACHE_OFF
-
 #ifndef CONFIG_SYS_DCACHE_OFF
 #define CONFIG_CMD_CACHE
 #endif

include/configs/mx6qsabreauto.h

@@ -1,7 +1,7 @@
 /*
  * Copyright (C) 2012 Freescale Semiconductor, Inc.
  *
- * Configuration settings for the Freescale i.MX6Q SabreSD board.
+ * Configuration settings for the Freescale i.MX6Q SabreAuto board.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
@@ -15,6 +15,7 @@
 #define CONFIG_MACH_TYPE	3529
 #define CONFIG_MXC_UART_BASE	UART4_BASE
 #define CONFIG_CONSOLE_DEV		"ttymxc3"
+#define CONFIG_MMCROOT			"/dev/mmcblk0p2"
 #define PHYS_SDRAM_SIZE		(2u * 1024 * 1024 * 1024)
 
 #include "mx6qsabre_common.h"

include/configs/mx6qsabrelite.h

@@ -37,7 +37,7 @@
 #define CONFIG_REVISION_TAG
 
 /* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN	       (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
+#define CONFIG_SYS_MALLOC_LEN		(10 * 1024 * 1024)
 
 #define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_MISC_INIT_R
@@ -72,6 +72,7 @@
 #define CONFIG_MMC
 #define CONFIG_CMD_MMC
 #define CONFIG_GENERIC_MMC
+#define CONFIG_MMC_BOUNCE_BUFFER
 #define CONFIG_CMD_EXT2
 #define CONFIG_CMD_FAT
 #define CONFIG_DOS_PARTITION
@@ -119,6 +120,19 @@
 /* Miscellaneous commands */
 #define CONFIG_CMD_BMODE
 
+/* Framebuffer and LCD */
+#define CONFIG_VIDEO
+#define CONFIG_VIDEO_IPUV3
+#define CONFIG_CFB_CONSOLE
+#define CONFIG_VGA_AS_SINGLE_DEVICE
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
+#define CONFIG_VIDEO_BMP_RLE8
+#define CONFIG_SPLASH_SCREEN
+#define CONFIG_BMP_16BPP
+#define CONFIG_VIDEO_LOGO
+#define CONFIG_IPUV3_CLK 260000000
+
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
 #define CONFIG_CONS_INDEX	       1
@@ -234,8 +248,6 @@
 #define CONFIG_OF_LIBFDT
 #define CONFIG_CMD_BOOTZ
 
-#define CONFIG_SYS_DCACHE_OFF
-
 #ifndef CONFIG_SYS_DCACHE_OFF
 #define CONFIG_CMD_CACHE
 #endif

include/configs/mx6qsabresd.h

@@ -20,6 +20,7 @@
 #define CONFIG_MACH_TYPE	3980
 #define CONFIG_MXC_UART_BASE	UART1_BASE
 #define CONFIG_CONSOLE_DEV		"ttymxc0"
+#define CONFIG_MMCROOT			"/dev/mmcblk1p2"
 #define PHYS_SDRAM_SIZE		(1u * 1024 * 1024 * 1024)
 
 #include "mx6qsabre_common.h"

include/configs/nokia_rx51.h

@@ -0,0 +1,452 @@
+/*
+ * (C) Copyright 2011-2012
+ * Pali Rohár <pali.rohar@gmail.com>
+ *
+ * (C) Copyright 2010
+ * Alistair Buxton <a.j.buxton@gmail.com>
+ *
+ * Derived from Beagle Board code:
+ * (C) Copyright 2006-2008
+ * Texas Instruments.
+ * Richard Woodruff <r-woodruff2@ti.com>
+ * Syed Mohammed Khasim <x0khasim@ti.com>
+ *
+ * Configuration settings for the Nokia RX-51 aka N900.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ */
+
+#define CONFIG_OMAP			/* in a TI OMAP core */
+#define CONFIG_OMAP34XX			/* which is a 34XX */
+#define CONFIG_OMAP3430			/* which is in a 3430 */
+#define CONFIG_OMAP3_RX51		/* working with RX51 */
+#define CONFIG_SYS_L2CACHE_OFF		/* pretend there is no L2 CACHE */
+
+#define CONFIG_MACH_TYPE		MACH_TYPE_NOKIA_RX51
+
+/*
+ * Nokia X-Loader loading secondary image to address 0x80400000
+ * NOLO loading boot image to random place, so it doesn't really
+ * matter what we set this to. We have to copy u-boot to this address
+ */
+#define CONFIG_SYS_TEXT_BASE	0x80008000
+
+#define CONFIG_SDRC			/* The chip has SDRC controller */
+
+#include <asm/arch/cpu.h>		/* get chip and board defs */
+#include <asm/arch/omap3.h>
+#include <asm/arch/mem.h>
+#include <linux/stringify.h>
+
+/*
+ * Display CPU and Board information
+ */
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+
+/* Clock Defines */
+#define V_OSCK			26000000	/* Clock output from T2 */
+#define V_SCLK			(V_OSCK >> 1)
+
+#undef CONFIG_USE_IRQ				/* no support for IRQs */
+#define CONFIG_MISC_INIT_R
+#define CONFIG_SKIP_LOWLEVEL_INIT		/* X-Loader set everything up */
+
+#define CONFIG_CMDLINE_TAG	/* enable passing kernel command line string */
+#define CONFIG_INITRD_TAG			/* enable passing initrd */
+#define CONFIG_REVISION_TAG			/* enable passing revision tag*/
+#define CONFIG_SETUP_MEMORY_TAGS		/* enable memory tag */
+
+/*
+ * Size of malloc() pool
+ */
+#define CONFIG_ENV_SIZE			(128 << 10)
+#define CONFIG_UBI_SIZE			(512 << 10)
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + CONFIG_UBI_SIZE + \
+					(128 << 10))
+
+/*
+ * Hardware drivers
+ */
+
+/*
+ * NS16550 Configuration
+ */
+#define V_NS16550_CLK		48000000		/* 48MHz (APLL96/2) */
+
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE	(-4)
+#define CONFIG_SYS_NS16550_CLK		V_NS16550_CLK
+
+/*
+ * select serial console configuration
+ */
+#define CONFIG_CONS_INDEX		3
+#define CONFIG_SYS_NS16550_COM3		OMAP34XX_UART3
+#define CONFIG_SERIAL3			3		/* UART3 on RX-51 */
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_BAUDRATE			115200
+#define CONFIG_SYS_BAUDRATE_TABLE { 4800, 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_OMAP_HSMMC
+#define CONFIG_DOS_PARTITION
+
+/* USB */
+#define CONFIG_MUSB_UDC
+#define CONFIG_MUSB_HDC
+#define CONFIG_USB_OMAP3
+#define CONFIG_TWL4030_USB
+
+/* USB device configuration */
+#define CONFIG_USB_DEVICE
+#define CONFIG_USBD_VENDORID		0x0421
+#define CONFIG_USBD_PRODUCTID		0x01c8
+#define CONFIG_USBD_MANUFACTURER	"Nokia"
+#define CONFIG_USBD_PRODUCT_NAME	"N900"
+
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+#define CONFIG_SYS_NO_FLASH
+
+/* commands to include */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_EXT2			/* EXT2 Support */
+#define CONFIG_CMD_EXT4			/* EXT4 Support */
+#define CONFIG_CMD_FAT			/* FAT support */
+
+#define CONFIG_CMD_I2C			/* I2C serial bus support */
+#define CONFIG_CMD_MMC			/* MMC support */
+#define CONFIG_CMD_GPIO			/* Enable gpio command */
+
+#define CONFIG_CMDLINE_EDITING		/* add command line history */
+#define CONFIG_AUTO_COMPLETE		/* add autocompletion support */
+
+#define CONFIG_CMD_CLEAR		/* ANSI terminal clear screen command */
+
+#ifdef ONENAND_SUPPORT
+
+#define CONFIG_CMD_ONENAND		/* ONENAND support */
+#define CONFIG_CMD_MTDPARTS		/* mtd parts support */
+
+#ifdef UBIFS_SUPPORT
+#define CONFIG_CMD_UBI			/* UBI Support */
+#define CONFIG_CMD_UBIFS		/* UBIFS Support */
+#endif
+
+#endif
+
+/* commands not needed from config_cmd_default.h */
+#undef CONFIG_CMD_FPGA			/* FPGA configuration Support */
+#undef CONFIG_CMD_IMI			/* iminfo */
+#undef CONFIG_CMD_NET			/* bootp, tftpboot, rarpboot */
+#undef CONFIG_CMD_NFS			/* NFS support */
+#undef CONFIG_CMD_SAVEENV		/* saveenv */
+#undef CONFIG_CMD_SETGETDCR		/* DCR support on 4xx */
+
+#define CONFIG_OMAP3_SPI
+#define CONFIG_HARD_I2C
+#define CONFIG_SYS_I2C_SPEED		100000
+#define CONFIG_SYS_I2C_SLAVE		1
+#define CONFIG_DRIVER_OMAP34XX_I2C
+
+/*
+ * TWL4030
+ */
+#define CONFIG_TWL4030_POWER
+#define CONFIG_TWL4030_LED
+#define CONFIG_TWL4030_KEYPAD
+
+#define CONFIG_OMAP_GPIO
+#define GPIO_SLIDE			71
+
+/*
+ * Board ONENAND Info.
+ */
+
+#define PART1_NAME			"bootloader"
+#define PART1_SIZE			128
+#define PART1_MULL			1024
+#define PART1_SUFF			"k"
+#define PART1_OFFS			0x00000000
+#define PART1_MASK			0x00000003
+
+#define PART2_NAME			"config"
+#define PART2_SIZE			384
+#define PART2_MULL			1024
+#define PART2_SUFF			"k"
+#define PART2_OFFS			0x00020000
+#define PART2_MASK			0x00000000
+
+#define PART3_NAME			"log"
+#define PART3_SIZE			256
+#define PART3_MULL			1024
+#define PART3_SUFF			"k"
+#define PART3_OFFS			0x00080000
+#define PART3_MASK			0x00000000
+
+#define PART4_NAME			"kernel"
+#define PART4_SIZE			2
+#define PART4_MULL			1024*1024
+#define PART4_SUFF			"m"
+#define PART4_OFFS			0x000c0000
+#define PART4_MASK			0x00000000
+
+#define PART5_NAME			"initfs"
+#define PART5_SIZE			2
+#define PART5_MULL			1024*1024
+#define PART5_SUFF			"m"
+#define PART5_OFFS			0x002c0000
+#define PART5_MASK			0x00000000
+
+#define PART6_NAME			"rootfs"
+#define PART6_SIZE			257280
+#define PART6_MULL			1024
+#define PART6_SUFF			"k"
+#define PART6_OFFS			0x004c0000
+#define PART6_MASK			0x00000000
+
+#ifdef ONENAND_SUPPORT
+
+#define PISMO1_NAND_SIZE		GPMC_SIZE_128M
+#define PISMO1_ONEN_SIZE		GPMC_SIZE_128M
+#define CONFIG_SYS_ONENAND_BASE		ONENAND_MAP
+#define CONFIG_MTD_DEVICE
+#define CONFIG_MTD_PARTITIONS
+
+#ifdef UBIFS_SUPPORT
+#define CONFIG_RBTREE
+#define CONFIG_LZO
+#endif
+
+#define MTDIDS_DEFAULT			"onenand0=onenand"
+#define MTDPARTS_DEFAULT		"mtdparts=onenand:" \
+		__stringify(PART1_SIZE) PART1_SUFF "(" PART1_NAME ")ro," \
+		__stringify(PART2_SIZE) PART2_SUFF "(" PART2_NAME ")," \
+		__stringify(PART3_SIZE) PART3_SUFF "(" PART3_NAME ")," \
+		__stringify(PART4_SIZE) PART4_SUFF "(" PART4_NAME ")," \
+		__stringify(PART5_SIZE) PART5_SUFF "(" PART5_NAME ")," \
+		"-(" PART6_NAME ")"
+
+#endif
+
+/* Watchdog support */
+#define CONFIG_HW_WATCHDOG
+
+/*
+ * Framebuffer
+ */
+/* Video console */
+#define CONFIG_VIDEO
+#define CONFIG_CFB_CONSOLE
+#define CONFIG_CFB_CONSOLE_ANSI	/* Enable ANSI escape codes in framebuffer */
+#define CONFIG_VIDEO_LOGO
+#define VIDEO_FB_16BPP_PIXEL_SWAP
+#define VIDEO_FB_16BPP_WORD_SWAP
+#define CONFIG_VIDEO_SW_CURSOR
+#define CONFIG_SPLASH_SCREEN
+
+/* functions for cfb_console */
+#define VIDEO_KBD_INIT_FCT		rx51_kp_init()
+#define VIDEO_TSTC_FCT			rx51_kp_tstc
+#define VIDEO_GETC_FCT			rx51_kp_getc
+#ifndef __ASSEMBLY__
+int rx51_kp_init(void);
+int rx51_kp_tstc(void);
+int rx51_kp_getc(void);
+#endif
+
+#ifndef MTDPARTS_DEFAULT
+#define MTDPARTS_DEFAULT
+#endif
+
+/* Environment information */
+#define CONFIG_BOOTDELAY		3
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	"mtdparts=" MTDPARTS_DEFAULT "\0" \
+	"usbtty=cdc_acm\0" \
+	"stdin=vga\0" \
+	"stdout=vga\0" \
+	"stderr=vga\0" \
+	"setcon=setenv stdin ${con};" \
+		"setenv stdout ${con};" \
+		"setenv stderr ${con}\0" \
+	"sercon=setenv con serial; run setcon\0" \
+	"usbcon=setenv con usbtty; run setcon\0" \
+	"vgacon=setenv con vga; run setcon\0" \
+	"slide=gpio input " __stringify(GPIO_SLIDE) "\0" \
+	"switchmmc=mmc dev ${mmcnum}\0" \
+	"kernaddr=0x82008000\0" \
+	"initrdaddr=0x84008000\0" \
+	"scriptaddr=0x86008000\0" \
+	"fileload=${mmctype}load mmc ${mmcnum}:${mmcpart} " \
+		"${loadaddr} ${mmcfile}\0" \
+	"kernload=setenv loadaddr ${kernaddr};" \
+		"setenv mmcfile ${mmckernfile};" \
+		"run fileload\0" \
+	"initrdload=setenv loadaddr ${initrdaddr};" \
+		"setenv mmcfile ${mmcinitrdfile};" \
+		"run fileload\0" \
+	"scriptload=setenv loadaddr ${scriptaddr};" \
+		"setenv mmcfile ${mmcscriptfile};" \
+		"run fileload\0" \
+	"scriptboot=echo Running ${mmcscriptfile} from mmc " \
+		"${mmcnum}:${mmcpart} ...; source ${scriptaddr}\0" \
+	"kernboot=echo Booting ${mmckernfile} from mmc " \
+		"${mmcnum}:${mmcpart} ...; bootm ${kernaddr}\0" \
+	"kerninitrdboot=echo Booting ${mmckernfile} ${mmcinitrdfile} from mmc "\
+		"${mmcnum}:${mmcpart} ...; bootm ${kernaddr} ${initrdaddr}\0" \
+	"attachboot=echo Booting attached kernel image ...;" \
+		"setenv setup_omap_atag 1;" \
+		"bootm ${attkernaddr};" \
+		"setenv setup_omap_atag\0" \
+	"trymmcscriptboot=if run switchmmc; then " \
+			"if run scriptload; then " \
+				"run scriptboot;" \
+			"fi;" \
+		"fi\0" \
+	"trymmckernboot=if run switchmmc; then " \
+			"if run kernload; then " \
+				"run kernboot;" \
+			"fi;" \
+		"fi\0" \
+	"trymmckerninitrdboot=if run switchmmc; then " \
+			"if run initrdload; then " \
+				"if run kernload; then " \
+					"run kerninitrdboot;" \
+				"fi;" \
+			"fi; " \
+		"fi\0" \
+	"trymmcpartboot=setenv mmcscriptfile boot.scr; run trymmcscriptboot;" \
+		"setenv mmckernfile uImage; run trymmckernboot\0" \
+	"trymmcallpartboot=setenv mmcpart 1; run trymmcpartboot;" \
+		"setenv mmcpart 2; run trymmcpartboot;" \
+		"setenv mmcpart 3; run trymmcpartboot;" \
+		"setenv mmcpart 4; run trymmcpartboot\0" \
+	"trymmcboot=if run switchmmc; then " \
+			"setenv mmctype fat;" \
+			"run trymmcallpartboot;" \
+			"setenv mmctype ext2;" \
+			"run trymmcallpartboot;" \
+			"setenv mmctype ext4;" \
+			"run trymmcallpartboot;" \
+		"fi\0" \
+	"emmcboot=setenv mmcnum 1; run trymmcboot\0" \
+	"sdboot=setenv mmcnum 0; run trymmcboot\0" \
+	""
+
+#define CONFIG_PREBOOT \
+	"if run slide; then true; else run attachboot; fi;" \
+	"echo Extra commands:;" \
+	"echo run sercon - Use serial port for control.;" \
+	"echo run usbcon - Use usbtty for control.;" \
+	"echo run vgacon - Use framebuffer/keyboard.;" \
+	"echo run sdboot - Boot from SD card slot.;" \
+	"echo run emmcboot - Boot internal eMMC memory.;" \
+	"echo run attachboot - Boot attached kernel image.;" \
+	"echo"
+
+#define CONFIG_BOOTCOMMAND \
+	"run sdboot;" \
+	"run emmcboot;" \
+	"run attachboot;" \
+	"echo"
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_LONGHELP			/* undef to save memory */
+#define CONFIG_SYS_HUSH_PARSER			/* use "hush" command parser */
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_PROMPT		"Nokia RX-51 # "
+#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size */
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
+						sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS		16	/* max number of command args */
+/* Boot Argument Buffer Size */
+#define CONFIG_SYS_BARGSIZE		(CONFIG_SYS_CBSIZE)
+
+#define CONFIG_SYS_MEMTEST_START	(OMAP34XX_SDRC_CS0)
+#define CONFIG_SYS_MEMTEST_END		(OMAP34XX_SDRC_CS0 + 0x01F00000)/*31MB*/
+
+/* default load address */
+#define CONFIG_SYS_LOAD_ADDR		(OMAP34XX_SDRC_CS0)
+
+/*
+ * OMAP3 has 12 GP timers, they can be driven by the system clock
+ * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
+ * This rate is divided by a local divisor.
+ */
+#define CONFIG_SYS_TIMERBASE		(OMAP34XX_GPT2)
+#define CONFIG_SYS_PTV			2	/* Divisor: 2^(PTV+1) => 8 */
+#define CONFIG_SYS_HZ			1000
+
+/*
+ * Stack sizes
+ *
+ * The stack sizes are set up in start.S using the settings below
+ */
+#define CONFIG_STACKSIZE		(128 << 10) /* regular stack 128 KiB */
+
+/*
+ * Physical Memory Map
+ */
+#define CONFIG_NR_DRAM_BANKS		2
+#define PHYS_SDRAM_1			OMAP34XX_SDRC_CS0
+
+/*
+ * FLASH and environment organization
+ */
+
+#define CONFIG_ENV_IS_NOWHERE
+
+#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_RAM_ADDR	0x4020f800
+#define CONFIG_SYS_INIT_RAM_SIZE	0x800
+#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_INIT_RAM_ADDR + \
+			CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+
+/*
+ * Attached kernel image
+ */
+
+#define SDRAM_SIZE			0x10000000	/* 256 MB */
+#define SDRAM_END			(CONFIG_SYS_SDRAM_BASE + SDRAM_SIZE)
+
+#define IMAGE_MAXSIZE			0x1FF800	/* 2 MB - 2 kB */
+#define KERNEL_OFFSET			0x40000		/* 256 kB */
+#define KERNEL_MAXSIZE			(IMAGE_MAXSIZE-KERNEL_OFFSET)
+#define KERNEL_ADDRESS			(SDRAM_END-KERNEL_MAXSIZE)
+
+/* Reserve protected RAM for attached kernel */
+#define CONFIG_PRAM			((KERNEL_MAXSIZE >> 10)+1)
+
+#endif /* __CONFIG_H */

include/configs/seaboard.h

@@ -81,6 +81,7 @@
 #define CONFIG_SYS_MMC_ENV_PART 2
 
 /* USB Host support */
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 3
 #define CONFIG_USB_EHCI
 #define CONFIG_USB_EHCI_TEGRA
 #define CONFIG_USB_STORAGE

include/configs/tegra-common-post.h

@@ -95,8 +95,6 @@
 #endif
 
 #define BOOTCMDS_COMMON \
-	"scriptaddr=0x400000\0" \
-	\
 	"rootpart=1\0" \
 	\
 	"script_boot="                                                    \
@@ -140,10 +138,36 @@
 
 #endif
 
+/*
+ * Memory layout for where various images get loaded by boot scripts:
+ *
+ * scriptaddr can be pretty much anywhere that doesn't conflict with something
+ *   else. Put it above BOOTMAPSZ to eliminate conflicts.
+ *
+ * kernel_addr_r must be within the first 128M of RAM in order for the
+ *   kernel's CONFIG_AUTO_ZRELADDR option to work. Since the kernel will
+ *   decompress itself to 0x8000 after the start of RAM, kernel_addr_r
+ *   should not overlap that area, or the kernel will have to copy itself
+ *   somewhere else before decompression. Similarly, the address of any other
+ *   data passed to the kernel shouldn't overlap the start of RAM. Pushing
+ *   this up to 16M allows for a sizable kernel to be decompressed below the
+ *   compressed load address.
+ *
+ * fdt_addr_r simply shouldn't overlap anything else. Choosing 32M allows for
+ *   the compressed kernel to be up to 16M too.
+ *
+ * ramdisk_addr_r simply shouldn't overlap anything else. Choosing 33M allows
+ *   for the FDT/DTB to be up to 1M, which is hopefully plenty.
+ */
+#define MEM_LAYOUT_ENV_SETTINGS \
+	"scriptaddr=0x10000000\0" \
+	"kernel_addr_r=0x01000000\0" \
+	"fdt_addr_r=0x02000000\0" \
+	"ramdisk_addr_r=0x02100000\0" \
+
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	TEGRA_DEVICE_SETTINGS \
-	"fdt_load=0x01000000\0" \
-	"fdt_high=01100000\0" \
+	MEM_LAYOUT_ENV_SETTINGS \
 	BOOTCMDS_COMMON
 
 /* overrides for SPL build here */

include/configs/tegra20-common.h

@@ -169,8 +169,11 @@
 #define PHYS_SDRAM_1_SIZE	0x20000000	/* 512M */
 
 #define CONFIG_SYS_TEXT_BASE	0x0010c000
+#define CONFIG_SYS_UBOOT_START	CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_SDRAM_BASE	PHYS_SDRAM_1
 
+#define CONFIG_SYS_BOOTMAPSZ	(256 << 20) /* 256M */
+
 #define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_STACKBASE
 #define CONFIG_SYS_INIT_RAM_SIZE	CONFIG_SYS_MALLOC_LEN
 #define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_INIT_RAM_ADDR + \
@@ -184,9 +187,13 @@
 
 /* Defines for SPL */
 #define CONFIG_SPL
+#define CONFIG_SPL_FRAMEWORK
+#define CONFIG_SPL_RAM_DEVICE
+#define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SPL_NAND_SIMPLE
 #define CONFIG_SPL_TEXT_BASE		0x00108000
-#define CONFIG_SPL_MAX_SIZE		0x00004000
+#define CONFIG_SPL_MAX_SIZE		(CONFIG_SYS_TEXT_BASE - \
+						CONFIG_SPL_TEXT_BASE)
 #define CONFIG_SYS_SPL_MALLOC_START	0x00090000
 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x00010000
 #define CONFIG_SPL_STACK		0x000ffffc
@@ -198,5 +205,6 @@
 #define CONFIG_SPL_LDSCRIPT		"$(CPUDIR)/tegra20/u-boot-spl.lds"
 
 #define CONFIG_SYS_NAND_SELF_INIT
+#define CONFIG_SYS_NAND_ONFI_DETECTION
 
 #endif /* __TEGRA20_COMMON_H */

include/fsl_esdhc.h

@@ -167,6 +167,7 @@
 
 struct fsl_esdhc_cfg {
 	u32	esdhc_base;
+	u32	sdhc_clk;
 };
 
 /* Select the correct accessors depending on endianess */

include/ipu_pixfmt.h

@@ -76,7 +76,9 @@
 #define IPU_PIX_FMT_YVU422P fourcc('Y', 'V', '1', '6')	/*< 16 YVU 4:2:2 */
 #define IPU_PIX_FMT_YUV422P fourcc('4', '2', '2', 'P')	/*< 16 YUV 4:2:2 */
 
-int ipuv3_fb_init(struct fb_videomode *mode, uint8_t disp, uint32_t pixfmt);
+int ipuv3_fb_init(struct fb_videomode const *mode,
+		  uint8_t disp,
+		  uint32_t pixfmt);
 void ipuv3_fb_shutdown(void);
 
 #endif

include/twl4030.h

@@ -151,6 +151,103 @@
 #define TWL4030_PM_MASTER_SW_EVENTS_DEVSLP		(1 << 1)
 #define TWL4030_PM_MASTER_SW_EVENTS_DEVOFF		(1 << 0)
 
+/* Power bus message definitions */
+
+/* The TWL4030/5030 splits its power-management resources (the various
+ * regulators, clock and reset lines) into 3 processor groups - P1, P2 and
+ * P3. These groups can then be configured to transition between sleep, wait-on
+ * and active states by sending messages to the power bus.  See Section 5.4.2
+ * Power Resources of TWL4030 TRM
+ */
+
+/* Processor groups */
+#define DEV_GRP_NULL		0x0
+#define DEV_GRP_P1		0x1	/* P1: all OMAP devices */
+#define DEV_GRP_P2		0x2	/* P2: all Modem devices */
+#define DEV_GRP_P3		0x4	/* P3: all peripheral devices */
+
+/* Resource groups */
+#define RES_GRP_RES		0x0	/* Reserved */
+#define RES_GRP_PP		0x1	/* Power providers */
+#define RES_GRP_RC		0x2	/* Reset and control */
+#define RES_GRP_PP_RC		0x3
+#define RES_GRP_PR		0x4	/* Power references */
+#define RES_GRP_PP_PR		0x5
+#define RES_GRP_RC_PR		0x6
+#define RES_GRP_ALL		0x7	/* All resource groups */
+
+#define RES_TYPE2_R0		0x0
+
+#define RES_TYPE_ALL		0x7
+
+/* Resource states */
+#define RES_STATE_WRST		0xF
+#define RES_STATE_ACTIVE	0xE
+#define RES_STATE_SLEEP		0x8
+#define RES_STATE_OFF		0x0
+
+/* Power resources */
+
+/* Power providers */
+#define RES_VAUX1               1
+#define RES_VAUX2               2
+#define RES_VAUX3               3
+#define RES_VAUX4               4
+#define RES_VMMC1               5
+#define RES_VMMC2               6
+#define RES_VPLL1               7
+#define RES_VPLL2               8
+#define RES_VSIM                9
+#define RES_VDAC                10
+#define RES_VINTANA1            11
+#define RES_VINTANA2            12
+#define RES_VINTDIG             13
+#define RES_VIO                 14
+#define RES_VDD1                15
+#define RES_VDD2                16
+#define RES_VUSB_1V5            17
+#define RES_VUSB_1V8            18
+#define RES_VUSB_3V1            19
+#define RES_VUSBCP              20
+#define RES_REGEN               21
+/* Reset and control */
+#define RES_NRES_PWRON          22
+#define RES_CLKEN               23
+#define RES_SYSEN               24
+#define RES_HFCLKOUT            25
+#define RES_32KCLKOUT           26
+#define RES_RESET               27
+/* Power Reference */
+#define RES_Main_Ref            28
+
+#define TOTAL_RESOURCES		28
+/*
+ * Power Bus Message Format ... these can be sent individually by Linux,
+ * but are usually part of downloaded scripts that are run when various
+ * power events are triggered.
+ *
+ *  Broadcast Message (16 Bits):
+ *    DEV_GRP[15:13] MT[12]  RES_GRP[11:9]  RES_TYPE2[8:7] RES_TYPE[6:4]
+ *    RES_STATE[3:0]
+ *
+ *  Singular Message (16 Bits):
+ *    DEV_GRP[15:13] MT[12]  RES_ID[11:4]  RES_STATE[3:0]
+ */
+
+#define MSG_BROADCAST(devgrp, grp, type, type2, state) \
+	((devgrp) << 13 | 1 << 12 | (grp) << 9 | (type2) << 7 \
+	| (type) << 4 | (state))
+
+#define MSG_SINGULAR(devgrp, id, state) \
+	((devgrp) << 13 | 0 << 12 | (id) << 4 | (state))
+
+#define MSG_BROADCAST_ALL(devgrp, state) \
+	((devgrp) << 5 | (state))
+
+#define MSG_BROADCAST_REF MSG_BROADCAST_ALL
+#define MSG_BROADCAST_PROV MSG_BROADCAST_ALL
+#define MSG_BROADCAST__CLK_RST MSG_BROADCAST_ALL
+
 /* Power Managment Receiver */
 #define TWL4030_PM_RECEIVER_SC_CONFIG			0x5B
 #define TWL4030_PM_RECEIVER_SC_DETECT1			0x5C
@@ -311,6 +408,7 @@
 #define TWL4030_PM_RECEIVER_VDAC_VSEL_18		0x03
 #define TWL4030_PM_RECEIVER_VMMC1_VSEL_30		0x02
 #define TWL4030_PM_RECEIVER_VMMC1_VSEL_32		0x03
+#define TWL4030_PM_RECEIVER_VSIM_VSEL_18		0x03
 
 /* Device Selection in PM Receiver Module */
 #define TWL4030_PM_RECEIVER_DEV_GRP_P1			0x20

tools/imximage.c

@@ -71,6 +71,8 @@ static uint32_t imximage_version;
 static set_dcd_val_t set_dcd_val;
 static set_dcd_rst_t set_dcd_rst;
 static set_imx_hdr_t set_imx_hdr;
+static uint32_t max_dcd_entries;
+static uint32_t *header_size_ptr;
 
 static uint32_t get_cfg_value(char *token, char *name,  int linenr)
 {
@@ -170,13 +172,6 @@ static void set_dcd_rst_v1(struct imx_header *imxhdr, uint32_t dcd_len,
 {
 	dcd_v1_t *dcd_v1 = &imxhdr->header.hdr_v1.dcd_table;
 
-	if (dcd_len > MAX_HW_CFG_SIZE_V1) {
-		fprintf(stderr, "Error: %s[%d] -"
-			"DCD table exceeds maximum size(%d)\n",
-			name, lineno, MAX_HW_CFG_SIZE_V1);
-		exit(EXIT_FAILURE);
-	}
-
 	dcd_v1->preamble.barker = DCD_BARKER;
 	dcd_v1->preamble.length = dcd_len * sizeof(dcd_type_addr_data_t);
 }
@@ -190,13 +185,6 @@ static void set_dcd_rst_v2(struct imx_header *imxhdr, uint32_t dcd_len,
 {
 	dcd_v2_t *dcd_v2 = &imxhdr->header.hdr_v2.dcd_table;
 
-	if (dcd_len > MAX_HW_CFG_SIZE_V2) {
-		fprintf(stderr, "Error: %s[%d] -"
-			"DCD table exceeds maximum size(%d)\n",
-			name, lineno, MAX_HW_CFG_SIZE_V2);
-		exit(EXIT_FAILURE);
-	}
-
 	dcd_v2->header.tag = DCD_HEADER_TAG;
 	dcd_v2->header.length = cpu_to_be16(
 			dcd_len * sizeof(dcd_addr_data_t) + 8);
@@ -208,84 +196,55 @@ static void set_dcd_rst_v2(struct imx_header *imxhdr, uint32_t dcd_len,
 }
 
 static void set_imx_hdr_v1(struct imx_header *imxhdr, uint32_t dcd_len,
-					struct stat *sbuf,
-					struct mkimage_params *params)
+		uint32_t entry_point, uint32_t flash_offset)
 {
 	imx_header_v1_t *hdr_v1 = &imxhdr->header.hdr_v1;
 	flash_header_v1_t *fhdr_v1 = &hdr_v1->fhdr;
 	dcd_v1_t *dcd_v1 = &hdr_v1->dcd_table;
-	uint32_t base_offset;
-
-	/* Exit if there is no BOOT_FROM field specifying the flash_offset */
-	if(imxhdr->flash_offset == FLASH_OFFSET_UNDEFINED) {
-		fprintf(stderr, "Error: Header v1: No BOOT_FROM tag in %s\n",
-			params->imagename);
-		exit(EXIT_FAILURE);
-	}
+	uint32_t hdr_base;
+	uint32_t header_length = (((char *)&dcd_v1->addr_data[dcd_len].addr)
+			- ((char *)imxhdr));
 
 	/* Set magic number */
 	fhdr_v1->app_code_barker = APP_CODE_BARKER;
 
-	fhdr_v1->app_dest_ptr = params->addr;
-	fhdr_v1->app_dest_ptr = params->ep - imxhdr->flash_offset -
-		sizeof(struct imx_header);
-	fhdr_v1->app_code_jump_vector = params->ep;
-
-	base_offset = fhdr_v1->app_dest_ptr + imxhdr->flash_offset ;
-	fhdr_v1->dcd_ptr_ptr =
-		(uint32_t) (offsetof(flash_header_v1_t, dcd_ptr) -
-		offsetof(flash_header_v1_t, app_code_jump_vector) +
-		base_offset);
+	hdr_base = entry_point - sizeof(struct imx_header);
+	fhdr_v1->app_dest_ptr = hdr_base - flash_offset;
+	fhdr_v1->app_code_jump_vector = entry_point;
 
-	fhdr_v1->dcd_ptr = base_offset +
-			offsetof(imx_header_v1_t, dcd_table);
-
-	/* The external flash header must be at the end of the DCD table */
-	dcd_v1->addr_data[dcd_len].type = sbuf->st_size +
-				imxhdr->flash_offset +
-				sizeof(struct imx_header);
+	fhdr_v1->dcd_ptr_ptr = hdr_base + offsetof(flash_header_v1_t, dcd_ptr);
+	fhdr_v1->dcd_ptr = hdr_base + offsetof(imx_header_v1_t, dcd_table);
 
 	/* Security feature are not supported */
 	fhdr_v1->app_code_csf = 0;
 	fhdr_v1->super_root_key = 0;
+	header_size_ptr = (uint32_t *)(((char *)imxhdr) + header_length - 4);
 }
 
 static void set_imx_hdr_v2(struct imx_header *imxhdr, uint32_t dcd_len,
-					struct stat *sbuf,
-					struct mkimage_params *params)
+		uint32_t entry_point, uint32_t flash_offset)
 {
 	imx_header_v2_t *hdr_v2 = &imxhdr->header.hdr_v2;
 	flash_header_v2_t *fhdr_v2 = &hdr_v2->fhdr;
-
-	/* Exit if there is no BOOT_FROM field specifying the flash_offset */
-	if(imxhdr->flash_offset == FLASH_OFFSET_UNDEFINED) {
-		fprintf(stderr, "Error: Header v2: No BOOT_FROM tag in %s\n",
-			params->imagename);
-		exit(EXIT_FAILURE);
-	}
+	uint32_t hdr_base;
 
 	/* Set magic number */
 	fhdr_v2->header.tag = IVT_HEADER_TAG; /* 0xD1 */
 	fhdr_v2->header.length = cpu_to_be16(sizeof(flash_header_v2_t));
 	fhdr_v2->header.version = IVT_VERSION; /* 0x40 */
 
-	fhdr_v2->entry = params->ep;
+	fhdr_v2->entry = entry_point;
 	fhdr_v2->reserved1 = fhdr_v2->reserved2 = 0;
-	fhdr_v2->self = params->ep - sizeof(struct imx_header);
-
-	fhdr_v2->dcd_ptr = fhdr_v2->self +
-			offsetof(imx_header_v2_t, dcd_table);
+	fhdr_v2->self = hdr_base = entry_point - sizeof(struct imx_header);
 
-	fhdr_v2->boot_data_ptr = fhdr_v2->self +
-			offsetof(imx_header_v2_t, boot_data);
-
-	hdr_v2->boot_data.start = fhdr_v2->self - imxhdr->flash_offset;
-	hdr_v2->boot_data.size = sbuf->st_size +
-			imxhdr->flash_offset +
-			sizeof(struct imx_header);
+	fhdr_v2->dcd_ptr = hdr_base + offsetof(imx_header_v2_t, dcd_table);
+	fhdr_v2->boot_data_ptr = hdr_base
+			+ offsetof(imx_header_v2_t, boot_data);
+	hdr_v2->boot_data.start = hdr_base - flash_offset;
 
 	/* Security feature are not supported */
 	fhdr_v2->csf = 0;
+	header_size_ptr = &hdr_v2->boot_data.size;
 }
 
 static void set_hdr_func(struct imx_header *imxhdr)
@@ -295,11 +254,13 @@ static void set_hdr_func(struct imx_header *imxhdr)
 		set_dcd_val = set_dcd_val_v1;
 		set_dcd_rst = set_dcd_rst_v1;
 		set_imx_hdr = set_imx_hdr_v1;
+		max_dcd_entries = MAX_HW_CFG_SIZE_V1;
 		break;
 	case IMXIMAGE_V2:
 		set_dcd_val = set_dcd_val_v2;
 		set_dcd_rst = set_dcd_rst_v2;
 		set_imx_hdr = set_imx_hdr_v2;
+		max_dcd_entries = MAX_HW_CFG_SIZE_V2;
 		break;
 	default:
 		err_imximage_version(imximage_version);
@@ -426,8 +387,15 @@ static void parse_cfg_fld(struct imx_header *imxhdr, int32_t *cmd,
 		value = get_cfg_value(token, name, lineno);
 		(*set_dcd_val)(imxhdr, name, lineno, fld, value, *dcd_len);
 
-		if (fld == CFG_REG_VALUE)
+		if (fld == CFG_REG_VALUE) {
 			(*dcd_len)++;
+			if (*dcd_len > max_dcd_entries) {
+				fprintf(stderr, "Error: %s[%d] -"
+					"DCD table exceeds maximum size(%d)\n",
+					name, lineno, max_dcd_entries);
+				exit(EXIT_FAILURE);
+			}
+		}
 		break;
 	default:
 		break;
@@ -480,6 +448,11 @@ static uint32_t parse_cfg_file(struct imx_header *imxhdr, char *name)
 	(*set_dcd_rst)(imxhdr, dcd_len, name, lineno);
 	fclose(fd);
 
+	/* Exit if there is no BOOT_FROM field specifying the flash_offset */
+	if (imxhdr->flash_offset == FLASH_OFFSET_UNDEFINED) {
+		fprintf(stderr, "Error: No BOOT_FROM tag in %s\n", name);
+		exit(EXIT_FAILURE);
+	}
 	return dcd_len;
 }
 
@@ -541,7 +514,8 @@ static void imximage_set_header(void *ptr, struct stat *sbuf, int ifd,
 	dcd_len = parse_cfg_file(imxhdr, params->imagename);
 
 	/* Set the imx header */
-	(*set_imx_hdr)(imxhdr, dcd_len, sbuf, params);
+	(*set_imx_hdr)(imxhdr, dcd_len, params->ep, imxhdr->flash_offset);
+	*header_size_ptr = sbuf->st_size + imxhdr->flash_offset;
 }
 
 int imximage_check_params(struct mkimage_params *params)

tools/imximage.h

@@ -168,9 +168,7 @@ typedef void (*set_dcd_rst_t)(struct imx_header *imxhdr,
 					uint32_t dcd_len,
 					char *name, int lineno);
 
-typedef void (*set_imx_hdr_t)(struct imx_header *imxhdr,
-					uint32_t dcd_len,
-					struct stat *sbuf,
-					struct mkimage_params *params);
+typedef void (*set_imx_hdr_t)(struct imx_header *imxhdr, uint32_t dcd_len,
+		uint32_t entry_point, uint32_t flash_offset);
 
 #endif /* _IMXIMAGE_H_ */