ppc4xx: Add initial AMCC Haleakala PPC405EXr eval board support

The Haleakala is nearly identical with the Kilauea eval board. The only
difference is that the 405EXr only supports one EMAC and one PCIe
interface. This patch adds support for the Haleakala board by using
the identical image for Kilauea and Haleakala. The distinction is done
by comparing the PVR.

Signed-off-by: Stefan Roese <sr@denx.de>

MAINTAINERS

@@ -303,6 +303,7 @@ Stefan Roese <sr@denx.de>
 	bamboo			PPC440EP
 	bunbinga		PPC405EP
 	ebony			PPC440GP
+	haleakala		PPC405EXr
 	katmai			PPC440SPe
 	kilauea			PPC405EX
 	lwmon5			PPC440EPx

MAKEALL

@@ -180,6 +180,7 @@ LIST_4xx="		\
 	ERIC		\
 	EXBITGEN	\
 	G2000		\
+	haleakala	\
 	hcu4		\
 	hcu5		\
 	HH405		\

Makefile

@@ -1168,8 +1168,10 @@ KAREF_config: unconfig
 katmai_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx katmai amcc
 
-kilauea_config:	unconfig
-	@$(MKCONFIG) $(@:_config=) ppc ppc4xx kilauea amcc
+# Kilauea & Haleakala images are identical (recognized via PVR)
+kilauea_config \
+haleakala_config: unconfig
+	@$(MKCONFIG) -n $@ -a kilauea ppc ppc4xx kilauea amcc
 
 luan_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx luan amcc

board/amcc/kilauea/kilauea.c

@@ -26,7 +26,7 @@
 #include <ppc405.h>
 #include <libfdt.h>
 #include <asm/processor.h>
-#include <asm-ppc/io.h>
+#include <asm/io.h>
 
 #if defined(CONFIG_PCI)
 #include <pci.h>
@@ -225,11 +225,41 @@ int misc_init_r(void)
 	return 0;
 }
 
+int board_emac_count(void)
+{
+	u32 pvr = get_pvr();
+
+	/*
+	 * 405EXr only has one EMAC interface, 405EX has two
+	 */
+	if ((pvr == PVR_405EXR1_RA) || (pvr == PVR_405EXR2_RA))
+		return 1;
+	else
+		return 2;
+}
+
+static int board_pcie_count(void)
+{
+	u32 pvr = get_pvr();
+
+	/*
+	 * 405EXr only has one EMAC interface, 405EX has two
+	 */
+	if ((pvr == PVR_405EXR1_RA) || (pvr == PVR_405EXR2_RA))
+		return 1;
+	else
+		return 2;
+}
+
 int checkboard (void)
 {
 	char *s = getenv("serial#");
+	u32 pvr = get_pvr();
 
-	printf("Board: Kilauea - AMCC PPC405EX Evaluation Board");
+	if ((pvr == PVR_405EXR1_RA) || (pvr == PVR_405EXR2_RA))
+		printf("Board: Haleakala - AMCC PPC405EXr Evaluation Board");
+	else
+		printf("Board: Kilauea - AMCC PPC405EX Evaluation Board");
 
 	if (s != NULL) {
 		puts(", serial# ");
@@ -310,7 +340,7 @@ void pcie_setup_hoses(int busno)
 	char *env;
 	unsigned int delay;
 
-	for (i = 0; i < 2; i++) {
+	for (i = 0; i < board_pcie_count(); i++) {
 
 		if (is_end_point(i)) {
 			printf("PCIE%d: will be configured as endpoint\n", i);

cpu/ppc4xx/4xx_enet.c

@@ -158,7 +158,14 @@ struct eth_device *emac0_dev = NULL;
 /*
  * Get count of EMAC devices (doesn't have to be the max. possible number
  * supported by the cpu)
+ *
+ * CONFIG_BOARD_EMAC_COUNT added so now a "dynamic" way to configure the
+ * EMAC count is possible. As it is needed for the Kilauea/Haleakala
+ * 405EX/405EXr eval board, using the same binary.
  */
+#if defined(CONFIG_BOARD_EMAC_COUNT)
+#define LAST_EMAC_NUM	board_emac_count()
+#else /* CONFIG_BOARD_EMAC_COUNT */
 #if defined(CONFIG_HAS_ETH3)
 #define LAST_EMAC_NUM	4
 #elif defined(CONFIG_HAS_ETH2)
@@ -168,6 +175,7 @@ struct eth_device *emac0_dev = NULL;
 #else
 #define LAST_EMAC_NUM	1
 #endif
+#endif /* CONFIG_BOARD_EMAC_COUNT */
 
 /* normal boards start with EMAC0 */
 #if !defined(CONFIG_EMAC_NR_START)
@@ -197,6 +205,8 @@ extern int emac4xx_miiphy_read (char *devname, unsigned char addr,
 extern int emac4xx_miiphy_write (char *devname, unsigned char addr,
 		unsigned char reg, unsigned short value);
 
+int board_emac_count(void);
+
 /*-----------------------------------------------------------------------------+
 | ppc_4xx_eth_halt
 | Disable MAL channel, and EMACn

include/configs/kilauea.h

@@ -38,6 +38,7 @@
 
 #define CONFIG_BOARD_EARLY_INIT_F 1		/* Call board_early_init_f */
 #define CONFIG_MISC_INIT_R	1		/* Call misc_init_r	*/
+#define CONFIG_BOARD_EMAC_COUNT
 
 /*-----------------------------------------------------------------------
  * Base addresses -- Note these are effective addresses where the