V4L/DVB (9049): convert tuner drivers to use dvb_frontend->callback

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

drivers/media/common/tuners/tda827x.c

@@ -447,17 +447,19 @@ static void tda827xa_lna_gain(struct dvb_frontend *fe, int high,
 			else
 				arg = 0;
 		}
-		if (priv->cfg->tuner_callback)
-			priv->cfg->tuner_callback(priv->i2c_adap->algo_data,
-								gp_func, arg);
+		if (fe->callback)
+			fe->callback(priv->i2c_adap->algo_data,
+				     DVB_FRONTEND_COMPONENT_TUNER,
+				     gp_func, arg);
 		buf[1] = high ? 0 : 1;
 		if (priv->cfg->config == 2)
 			buf[1] = high ? 1 : 0;
 		i2c_transfer(priv->i2c_adap, &msg, 1);
 		break;
 	case 3: /* switch with GPIO of saa713x */
-		if (priv->cfg->tuner_callback)
-			priv->cfg->tuner_callback(priv->i2c_adap->algo_data, 0, high);
+		if (fe->callback)
+			fe->callback(priv->i2c_adap->algo_data,
+				     DVB_FRONTEND_COMPONENT_TUNER, 0, high);
 		break;
 	}
 }

drivers/media/common/tuners/tda827x.h

@@ -36,7 +36,6 @@ struct tda827x_config
 	/* interface to tda829x driver */
 	unsigned int config;
 	int 	     switch_addr;
-	int (*tuner_callback) (void *dev, int command, int arg);
 
 	void (*agcf)(struct dvb_frontend *fe);
 };

drivers/media/common/tuners/tda8290.c

@@ -672,10 +672,8 @@ struct dvb_frontend *tda829x_attach(struct dvb_frontend *fe,
 	priv->i2c_props.addr     = i2c_addr;
 	priv->i2c_props.adap     = i2c_adap;
 	priv->i2c_props.name     = "tda829x";
-	if (cfg) {
+	if (cfg)
 		priv->cfg.config         = cfg->lna_cfg;
-		priv->cfg.tuner_callback = cfg->tuner_callback;
-	}
 
 	if (tda8290_probe(&priv->i2c_props) == 0) {
 		priv->ver = TDA8290;

drivers/media/common/tuners/tda8290.h

@@ -22,7 +22,6 @@
 
 struct tda829x_config {
 	unsigned int lna_cfg;
-	int (*tuner_callback) (void *dev, int command, int arg);
 
 	unsigned int probe_tuner:1;
 #define TDA829X_PROBE_TUNER 0

drivers/media/common/tuners/tuner-xc2028.c

@@ -71,9 +71,6 @@ struct firmware_properties {
 struct xc2028_data {
 	struct list_head        hybrid_tuner_instance_list;
 	struct tuner_i2c_props  i2c_props;
-	int                     (*tuner_callback) (void *dev,
-						   int command, int arg);
-	void			*video_dev;
 	__u32			frequency;
 
 	struct firmware_description *firm;
@@ -492,6 +489,23 @@ ret:
 	return i;
 }
 
+static inline int do_tuner_callback(struct dvb_frontend *fe, int cmd, int arg)
+{
+	struct xc2028_data *priv = fe->tuner_priv;
+
+	/* analog side (tuner-core) uses i2c_adap->algo_data.
+	 * digital side is not guaranteed to have algo_data defined.
+	 *
+	 * digital side will always have fe->dvb defined.
+	 * analog side (tuner-core) doesn't (yet) define fe->dvb.
+	 */
+
+	return (!fe->callback) ? -EINVAL :
+		fe->callback(((fe->dvb) && (fe->dvb->priv)) ?
+				fe->dvb->priv : priv->i2c_props.adap->algo_data,
+			     DVB_FRONTEND_COMPONENT_TUNER, cmd, arg);
+}
+
 static int load_firmware(struct dvb_frontend *fe, unsigned int type,
 			 v4l2_std_id *id)
 {
@@ -530,8 +544,7 @@ static int load_firmware(struct dvb_frontend *fe, unsigned int type,
 
 		if (!size) {
 			/* Special callback command received */
-			rc = priv->tuner_callback(priv->video_dev,
-						  XC2028_TUNER_RESET, 0);
+			rc = do_tuner_callback(fe, XC2028_TUNER_RESET, 0);
 			if (rc < 0) {
 				tuner_err("Error at RESET code %d\n",
 					   (*p) & 0x7f);
@@ -542,8 +555,7 @@ static int load_firmware(struct dvb_frontend *fe, unsigned int type,
 		if (size >= 0xff00) {
 			switch (size) {
 			case 0xff00:
-				rc = priv->tuner_callback(priv->video_dev,
-							XC2028_RESET_CLK, 0);
+				rc = do_tuner_callback(fe, XC2028_RESET_CLK, 0);
 				if (rc < 0) {
 					tuner_err("Error at RESET code %d\n",
 						  (*p) & 0x7f);
@@ -715,8 +727,7 @@ retry:
 	memset(&priv->cur_fw, 0, sizeof(priv->cur_fw));
 
 	/* Reset is needed before loading firmware */
-	rc = priv->tuner_callback(priv->video_dev,
-				  XC2028_TUNER_RESET, 0);
+	rc = do_tuner_callback(fe, XC2028_TUNER_RESET, 0);
 	if (rc < 0)
 		goto fail;
 
@@ -933,7 +944,7 @@ static int generic_set_freq(struct dvb_frontend *fe, u32 freq /* in HZ */,
 	   The reset CLK is needed only with tm6000.
 	   Driver should work fine even if this fails.
 	 */
-	priv->tuner_callback(priv->video_dev, XC2028_RESET_CLK, 1);
+	do_tuner_callback(fe, XC2028_RESET_CLK, 1);
 
 	msleep(10);
 
@@ -1177,20 +1188,10 @@ struct dvb_frontend *xc2028_attach(struct dvb_frontend *fe,
 		break;
 	case 1:
 		/* new tuner instance */
-		priv->tuner_callback = cfg->callback;
 		priv->ctrl.max_len = 13;
 
 		mutex_init(&priv->lock);
 
-		/* analog side (tuner-core) uses i2c_adap->algo_data.
-		 * digital side is not guaranteed to have algo_data defined.
-		 *
-		 * digital side will always have fe->dvb defined.
-		 * analog side (tuner-core) doesn't (yet) define fe->dvb.
-		 */
-		priv->video_dev = ((fe->dvb) && (fe->dvb->priv)) ?
-				   fe->dvb->priv : cfg->i2c_adap->algo_data;
-
 		fe->tuner_priv = priv;
 		break;
 	case 2:

drivers/media/common/tuners/tuner-xc2028.h

@@ -39,9 +39,7 @@ struct xc2028_ctrl {
 struct xc2028_config {
 	struct i2c_adapter *i2c_adap;
 	u8 		   i2c_addr;
-	void               *video_dev;
 	struct xc2028_ctrl *ctrl;
-	int                (*callback) (void *dev, int command, int arg);
 };
 
 /* xc2028 commands for callback */

drivers/media/common/tuners/xc5000.c

@@ -58,8 +58,6 @@ struct xc5000_priv {
 	u32 bandwidth;
 	u8  video_standard;
 	u8  rf_mode;
-
-	int  (*tuner_callback) (void *priv, int command, int arg);
 };
 
 /* Misc Defines */
@@ -232,10 +230,11 @@ static void xc5000_TunerReset(struct dvb_frontend *fe)
 
 	dprintk(1, "%s()\n", __func__);
 
-	if (priv->tuner_callback) {
-		ret = priv->tuner_callback(((fe->dvb) && (fe->dvb->priv)) ?
+	if (fe->callback) {
+		ret = fe->callback(((fe->dvb) && (fe->dvb->priv)) ?
 					   fe->dvb->priv :
 					   priv->i2c_props.adap->algo_data,
+					   DVB_FRONTEND_COMPONENT_TUNER,
 					   XC5000_TUNER_RESET, 0);
 		if (ret)
 			printk(KERN_ERR "xc5000: reset failed\n");
@@ -975,7 +974,6 @@ struct dvb_frontend *xc5000_attach(struct dvb_frontend *fe,
 		/* new tuner instance */
 		priv->bandwidth = BANDWIDTH_6_MHZ;
 		priv->if_khz = cfg->if_khz;
-		priv->tuner_callback = cfg->tuner_callback;
 
 		fe->tuner_priv = priv;
 		break;

drivers/media/common/tuners/xc5000.h

@@ -30,8 +30,6 @@ struct i2c_adapter;
 struct xc5000_config {
 	u8   i2c_address;
 	u32  if_khz;
-
-	int  (*tuner_callback) (void *priv, int command, int arg);
 };
 
 /* xc5000 callback command */

drivers/media/dvb/dvb-usb/cxusb.c

@@ -742,7 +742,8 @@ static int cxusb_lgh064f_tuner_attach(struct dvb_usb_adapter *adap)
 	return 0;
 }
 
-static int dvico_bluebird_xc2028_callback(void *ptr, int command, int arg)
+static int dvico_bluebird_xc2028_callback(void *ptr, int component,
+					  int command, int arg)
 {
 	struct dvb_usb_adapter *adap = ptr;
 	struct dvb_usb_device *d = adap->dev;
@@ -770,7 +771,6 @@ static int cxusb_dvico_xc3028_tuner_attach(struct dvb_usb_adapter *adap)
 	struct xc2028_config	  cfg = {
 		.i2c_adap  = &adap->dev->i2c_adap,
 		.i2c_addr  = 0x61,
-		.callback  = dvico_bluebird_xc2028_callback,
 	};
 	static struct xc2028_ctrl ctl = {
 		.fname       = XC2028_DEFAULT_FIRMWARE,
@@ -778,6 +778,9 @@ static int cxusb_dvico_xc3028_tuner_attach(struct dvb_usb_adapter *adap)
 		.demod       = XC3028_FE_ZARLINK456,
 	};
 
+	/* FIXME: generalize & move to common area */
+	adap->fe->callback = dvico_bluebird_xc2028_callback;
+
 	fe = dvb_attach(xc2028_attach, adap->fe, &cfg);
 	if (fe == NULL || fe->ops.tuner_ops.set_config == NULL)
 		return -EIO;

drivers/media/dvb/dvb-usb/dib0700_devices.c

@@ -368,7 +368,8 @@ static struct dib7000p_config stk7700ph_dib7700_xc3028_config = {
 	.gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
 };
 
-static int stk7700ph_xc3028_callback(void *ptr, int command, int arg)
+static int stk7700ph_xc3028_callback(void *ptr, int component,
+				     int command, int arg)
 {
 	struct dvb_usb_adapter *adap = ptr;
 
@@ -396,7 +397,6 @@ static struct xc2028_ctrl stk7700ph_xc3028_ctrl = {
 
 static struct xc2028_config stk7700ph_xc3028_config = {
 	.i2c_addr = 0x61,
-	.callback = stk7700ph_xc3028_callback,
 	.ctrl = &stk7700ph_xc3028_ctrl,
 };
 
@@ -437,7 +437,9 @@ static int stk7700ph_tuner_attach(struct dvb_usb_adapter *adap)
 		DIBX000_I2C_INTERFACE_TUNER, 1);
 
 	stk7700ph_xc3028_config.i2c_adap = tun_i2c;
-	stk7700ph_xc3028_config.video_dev = adap;
+
+	/* FIXME: generalize & move to common area */
+	adap->fe->callback = stk7700ph_xc3028_callback;
 
 	return dvb_attach(xc2028_attach, adap->fe, &stk7700ph_xc3028_config)
 		== NULL ? -ENODEV : 0;

drivers/media/video/au0828/au0828-cards.c

@@ -46,7 +46,7 @@ struct au0828_board au0828_boards[] = {
 /* Tuner callback function for au0828 boards. Currently only needed
  * for HVR1500Q, which has an xc5000 tuner.
  */
-int au0828_tuner_callback(void *priv, int command, int arg)
+int au0828_tuner_callback(void *priv, int component, int command, int arg)
 {
 	struct au0828_dev *dev = priv;
 

drivers/media/video/au0828/au0828-dvb.c

@@ -53,7 +53,6 @@ static struct au8522_config hauppauge_woodbury_config = {
 static struct xc5000_config hauppauge_hvr950q_tunerconfig = {
 	.i2c_address      = 0x61,
 	.if_khz           = 6000,
-	.tuner_callback   = au0828_tuner_callback
 };
 
 static struct mxl5007t_config mxl5007t_hvr950q_config = {
@@ -389,6 +388,8 @@ int au0828_dvb_register(struct au0828_dev *dev)
 		       __func__);
 		return -1;
 	}
+	/* define general-purpose callback pointer */
+	dvb->frontend->callback = au0828_tuner_callback;
 
 	/* register everything */
 	ret = dvb_register(dev);

drivers/media/video/au0828/au0828.h

@@ -103,7 +103,8 @@ extern int au0828_debug;
 extern struct au0828_board au0828_boards[];
 extern struct usb_device_id au0828_usb_id_table[];
 extern void au0828_gpio_setup(struct au0828_dev *dev);
-extern int au0828_tuner_callback(void *priv, int command, int arg);
+extern int au0828_tuner_callback(void *priv, int component,
+				 int command, int arg);
 extern void au0828_card_setup(struct au0828_dev *dev);
 
 /* ----------------------------------------------------------- */

drivers/media/video/cx18/cx18-gpio.c

@@ -152,7 +152,7 @@ void cx18_gpio_init(struct cx18 *cx)
 }
 
 /* Xceive tuner reset function */
-int cx18_reset_tuner_gpio(void *dev, int cmd, int value)
+int cx18_reset_tuner_gpio(void *dev, int component, int cmd, int value)
 {
 	struct i2c_algo_bit_data *algo = dev;
 	struct cx18_i2c_algo_callback_data *cb_data = algo->data;

drivers/media/video/cx18/cx18-gpio.h

@@ -23,5 +23,5 @@
 void cx18_gpio_init(struct cx18 *cx);
 void cx18_reset_i2c_slaves_gpio(struct cx18 *cx);
 void cx18_reset_ir_gpio(void *data);
-int cx18_reset_tuner_gpio(void *dev, int cmd, int value);
+int cx18_reset_tuner_gpio(void *dev, int component, int cmd, int value);
 int cx18_gpio(struct cx18 *cx, unsigned int command, void *arg);

drivers/media/video/cx23885/cx23885-cards.c

@@ -337,7 +337,7 @@ static void hauppauge_eeprom(struct cx23885_dev *dev, u8 *eeprom_data)
 			dev->name, tv.model);
 }
 
-int cx23885_tuner_callback(void *priv, int command, int arg)
+int cx23885_tuner_callback(void *priv, int component, int command, int arg)
 {
 	struct cx23885_tsport *port = priv;
 	struct cx23885_dev *dev = port->dev;

drivers/media/video/cx23885/cx23885-dvb.c

@@ -189,13 +189,11 @@ static struct s5h1411_config dvico_s5h1411_config = {
 static struct xc5000_config hauppauge_hvr1500q_tunerconfig = {
 	.i2c_address      = 0x61,
 	.if_khz           = 5380,
-	.tuner_callback   = cx23885_tuner_callback,
 };
 
 static struct xc5000_config dvico_xc5000_tunerconfig = {
 	.i2c_address      = 0x64,
 	.if_khz           = 5380,
-	.tuner_callback   = cx23885_tuner_callback,
 };
 
 static struct tda829x_config tda829x_no_probe = {
@@ -403,8 +401,6 @@ static int dvb_register(struct cx23885_tsport *port)
 			struct xc2028_config cfg = {
 				.i2c_adap  = &i2c_bus->i2c_adap,
 				.i2c_addr  = 0x61,
-				.video_dev = port,
-				.callback  = cx23885_tuner_callback,
 			};
 			static struct xc2028_ctrl ctl = {
 				.fname       = XC2028_DEFAULT_FIRMWARE,
@@ -443,8 +439,6 @@ static int dvb_register(struct cx23885_tsport *port)
 			struct xc2028_config cfg = {
 				.i2c_adap  = &dev->i2c_bus[1].i2c_adap,
 				.i2c_addr  = 0x64,
-				.video_dev = port,
-				.callback  = cx23885_tuner_callback,
 			};
 			static struct xc2028_ctrl ctl = {
 				.fname   = XC3028L_DEFAULT_FIRMWARE,
@@ -485,8 +479,6 @@ static int dvb_register(struct cx23885_tsport *port)
 			struct xc2028_config	  cfg = {
 				.i2c_adap  = &i2c_bus->i2c_adap,
 				.i2c_addr  = 0x61,
-				.video_dev = port,
-				.callback  = cx23885_tuner_callback,
 			};
 			static struct xc2028_ctrl ctl = {
 				.fname       = XC2028_DEFAULT_FIRMWARE,
@@ -512,8 +504,6 @@ static int dvb_register(struct cx23885_tsport *port)
 			struct xc2028_config	  cfg = {
 				.i2c_adap  = &dev->i2c_bus[1].i2c_adap,
 				.i2c_addr  = 0x61,
-				.video_dev = port,
-				.callback  = cx23885_tuner_callback,
 			};
 			static struct xc2028_ctrl ctl = {
 				.fname       = XC2028_DEFAULT_FIRMWARE,
@@ -536,6 +526,8 @@ static int dvb_register(struct cx23885_tsport *port)
 		printk("%s: frontend initialization failed\n", dev->name);
 		return -1;
 	}
+	/* define general-purpose callback pointer */
+	port->dvb.frontend->callback = cx23885_tuner_callback;
 
 	/* Put the analog decoder in standby to keep it quiet */
 	cx23885_call_i2c_clients(i2c_bus, TUNER_SET_STANDBY, NULL);

drivers/media/video/cx23885/cx23885.h

@@ -411,7 +411,7 @@ extern const unsigned int cx23885_bcount;
 extern struct cx23885_subid cx23885_subids[];
 extern const unsigned int cx23885_idcount;
 
-extern int cx23885_tuner_callback(void *priv, int command, int arg);
+extern int cx23885_tuner_callback(void *priv, int component, int command, int arg);
 extern void cx23885_card_list(struct cx23885_dev *dev);
 extern int  cx23885_ir_init(struct cx23885_dev *dev);
 extern void cx23885_gpio_setup(struct cx23885_dev *dev);

drivers/media/video/cx88/cx88-cards.c

@@ -2308,9 +2308,21 @@ static int cx88_dvico_xc2028_callback(struct cx88_core *core,
 {
 	switch (command) {
 	case XC2028_TUNER_RESET:
-		cx_write(MO_GP0_IO, 0x101000);
-		mdelay(5);
-		cx_set(MO_GP0_IO, 0x101010);
+		switch (core->boardnr) {
+		case CX88_BOARD_DVICO_FUSIONHDTV_5_PCI_NANO:
+			/* GPIO-4 xc3028 tuner */
+
+			cx_set(MO_GP0_IO, 0x00001000);
+			cx_clear(MO_GP0_IO, 0x00000010);
+			msleep(100);
+			cx_set(MO_GP0_IO, 0x00000010);
+			msleep(100);
+			break;
+		default:
+			cx_write(MO_GP0_IO, 0x101000);
+			mdelay(5);
+			cx_set(MO_GP0_IO, 0x101010);
+		}
 		break;
 	default:
 		return -EINVAL;
@@ -2419,6 +2431,7 @@ static int cx88_xc2028_tuner_callback(struct cx88_core *core,
 	case CX88_BOARD_PROLINK_PV_8000GT:
 		return cx88_pv_8000gt_callback(core, command, arg);
 	case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PRO:
+	case CX88_BOARD_DVICO_FUSIONHDTV_5_PCI_NANO:
 		return cx88_dvico_xc2028_callback(core, command, arg);
 	}
 
@@ -2486,7 +2499,7 @@ static int cx88_xc5000_tuner_callback(struct cx88_core *core,
 	return 0; /* Should never be here */
 }
 
-int cx88_tuner_callback(void *priv, int command, int arg)
+int cx88_tuner_callback(void *priv, int component, int command, int arg)
 {
 	struct i2c_algo_bit_data *i2c_algo = priv;
 	struct cx88_core *core;
@@ -2503,6 +2516,9 @@ int cx88_tuner_callback(void *priv, int command, int arg)
 		return -EINVAL;
 	}
 
+	if (component != DVB_FRONTEND_COMPONENT_TUNER)
+		return -EINVAL;
+
 	switch (core->board.tuner_type) {
 		case TUNER_XC2028:
 			info_printk(core, "Calling XC2028/3028 callback\n");

drivers/media/video/cx88/cx88-dvb.c

@@ -405,40 +405,6 @@ static int tevii_dvbs_set_voltage(struct dvb_frontend *fe,
 	return 0;
 }
 
-static int cx88_pci_nano_callback(void *ptr, int command, int arg)
-{
-	struct cx88_core *core = ptr;
-
-	switch (command) {
-	case XC2028_TUNER_RESET:
-		/* Send the tuner in then out of reset */
-		dprintk(1, "%s: XC2028_TUNER_RESET %d\n", __func__, arg);
-
-		switch (core->boardnr) {
-		case CX88_BOARD_DVICO_FUSIONHDTV_5_PCI_NANO:
-			/* GPIO-4 xc3028 tuner */
-
-			cx_set(MO_GP0_IO, 0x00001000);
-			cx_clear(MO_GP0_IO, 0x00000010);
-			msleep(100);
-			cx_set(MO_GP0_IO, 0x00000010);
-			msleep(100);
-			break;
-		}
-
-		break;
-	case XC2028_RESET_CLK:
-		dprintk(1, "%s: XC2028_RESET_CLK %d\n", __func__, arg);
-		break;
-	default:
-		dprintk(1, "%s: unknown command %d, arg %d\n", __func__,
-			command, arg);
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
 static struct cx24123_config geniatech_dvbs_config = {
 	.demod_address = 0x55,
 	.set_ts_params = cx24123_set_ts_param,
@@ -486,7 +452,6 @@ static struct s5h1409_config kworld_atsc_120_config = {
 static struct xc5000_config pinnacle_pctv_hd_800i_tuner_config = {
 	.i2c_address	= 0x64,
 	.if_khz		= 5380,
-	.tuner_callback	= cx88_tuner_callback,
 };
 
 static struct zl10353_config cx88_geniatech_x8000_mt = {
@@ -507,7 +472,6 @@ static struct s5h1411_config dvico_fusionhdtv7_config = {
 static struct xc5000_config dvico_fusionhdtv7_tuner_config = {
 	.i2c_address    = 0xc2 >> 1,
 	.if_khz         = 5380,
-	.tuner_callback = cx88_tuner_callback,
 };
 
 static int attach_xc3028(u8 addr, struct cx8802_dev *dev)
@@ -518,7 +482,6 @@ static int attach_xc3028(u8 addr, struct cx8802_dev *dev)
 		.i2c_adap  = &dev->core->i2c_adap,
 		.i2c_addr  = addr,
 		.ctrl      = &ctl,
-		.callback  = cx88_tuner_callback,
 	};
 
 	if (!dev->dvb.frontend) {
@@ -912,7 +875,6 @@ static int dvb_register(struct cx8802_dev *dev)
 			struct xc2028_config cfg = {
 				.i2c_adap  = &core->i2c_adap,
 				.i2c_addr  = 0x61,
-				.callback  = cx88_pci_nano_callback,
 			};
 			static struct xc2028_ctrl ctl = {
 				.fname       = XC2028_DEFAULT_FIRMWARE,
@@ -1035,6 +997,8 @@ static int dvb_register(struct cx8802_dev *dev)
 		       core->name);
 		return -EINVAL;
 	}
+	/* define general-purpose callback pointer */
+	dev->dvb.frontend->callback = cx88_tuner_callback;
 
 	/* Ensure all frontends negotiate bus access */
 	dev->dvb.frontend->ops.ts_bus_ctrl = cx88_dvb_bus_ctrl;

drivers/media/video/cx88/cx88.h

@@ -607,7 +607,7 @@ extern void cx88_call_i2c_clients(struct cx88_core *core,
 /* ----------------------------------------------------------- */
 /* cx88-cards.c                                                */
 
-extern int cx88_tuner_callback(void *dev, int command, int arg);
+extern int cx88_tuner_callback(void *dev, int component, int command, int arg);
 extern int cx88_get_resources(const struct cx88_core *core,
 			      struct pci_dev *pci);
 extern struct cx88_core *cx88_core_create(struct pci_dev *pci, int nr);

drivers/media/video/em28xx/em28xx-cards.c

@@ -1271,7 +1271,7 @@ static struct em28xx_hash_table em28xx_i2c_hash[] = {
 	{0x1ba50080, EM2860_BOARD_POINTNIX_INTRAORAL_CAMERA, TUNER_ABSENT},
 };
 
-int em28xx_tuner_callback(void *ptr, int command, int arg)
+int em28xx_tuner_callback(void *ptr, int component, int command, int arg)
 {
 	int rc = 0;
 	struct em28xx *dev = ptr;

drivers/media/video/em28xx/em28xx-dvb.c

@@ -249,7 +249,6 @@ static int attach_xc3028(u8 addr, struct em28xx *dev)
 	memset(&cfg, 0, sizeof(cfg));
 	cfg.i2c_adap  = &dev->i2c_adap;
 	cfg.i2c_addr  = addr;
-	cfg.callback  = em28xx_tuner_callback;
 
 	if (!dev->dvb->frontend) {
 		printk(KERN_ERR "%s/2: dvb frontend not attached. "
@@ -474,6 +473,8 @@ static int dvb_init(struct em28xx *dev)
 		result = -EINVAL;
 		goto out_free;
 	}
+	/* define general-purpose callback pointer */
+	dvb->frontend->callback = em28xx_tuner_callback;
 
 	/* register everything */
 	result = register_dvb(dvb, THIS_MODULE, dev, &dev->udev->dev);

drivers/media/video/em28xx/em28xx.h

@@ -528,7 +528,7 @@ extern struct em28xx_board em28xx_boards[];
 extern struct usb_device_id em28xx_id_table[];
 extern const unsigned int em28xx_bcount;
 void em28xx_set_ir(struct em28xx *dev, struct IR_i2c *ir);
-int em28xx_tuner_callback(void *ptr, int command, int arg);
+int em28xx_tuner_callback(void *ptr, int component, int command, int arg);
 
 /* Provided by em28xx-input.c */
 /* TODO: Check if the standard get_key handlers on ir-common can be used */

drivers/media/video/ivtv/ivtv-gpio.c

@@ -124,7 +124,7 @@ void ivtv_reset_ir_gpio(struct ivtv *itv)
 }
 
 /* Xceive tuner reset function */
-int ivtv_reset_tuner_gpio(void *dev, int cmd, int value)
+int ivtv_reset_tuner_gpio(void *dev, int component, int cmd, int value)
 {
 	struct i2c_algo_bit_data *algo = dev;
 	struct ivtv *itv = algo->data;

drivers/media/video/ivtv/ivtv-gpio.h

@@ -24,7 +24,7 @@
 /* GPIO stuff */
 void ivtv_gpio_init(struct ivtv *itv);
 void ivtv_reset_ir_gpio(struct ivtv *itv);
-int ivtv_reset_tuner_gpio(void *dev, int cmd, int value);
+int ivtv_reset_tuner_gpio(void *dev, int component, int cmd, int value);
 int ivtv_gpio(struct ivtv *itv, unsigned int command, void *arg);
 
 #endif

drivers/media/video/saa7134/saa7134-cards.c

@@ -5576,7 +5576,7 @@ static int saa7134_tda8290_callback(struct saa7134_dev *dev,
 	return 0;
 }
 
-int saa7134_tuner_callback(void *priv, int command, int arg)
+int saa7134_tuner_callback(void *priv, int component, int command, int arg)
 {
 	struct saa7134_dev *dev = priv;
 	if (dev != NULL) {

drivers/media/video/saa7134/saa7134-dvb.c

@@ -553,7 +553,6 @@ static int configure_tda827x_fe(struct saa7134_dev *dev,
 /* ------------------------------------------------------------------ */
 
 static struct tda827x_config tda827x_cfg_0 = {
-	.tuner_callback = saa7134_tuner_callback,
 	.init = philips_tda827x_tuner_init,
 	.sleep = philips_tda827x_tuner_sleep,
 	.config = 0,
@@ -561,7 +560,6 @@ static struct tda827x_config tda827x_cfg_0 = {
 };
 
 static struct tda827x_config tda827x_cfg_1 = {
-	.tuner_callback = saa7134_tuner_callback,
 	.init = philips_tda827x_tuner_init,
 	.sleep = philips_tda827x_tuner_sleep,
 	.config = 1,
@@ -569,7 +567,6 @@ static struct tda827x_config tda827x_cfg_1 = {
 };
 
 static struct tda827x_config tda827x_cfg_2 = {
-	.tuner_callback = saa7134_tuner_callback,
 	.init = philips_tda827x_tuner_init,
 	.sleep = philips_tda827x_tuner_sleep,
 	.config = 2,
@@ -577,7 +574,6 @@ static struct tda827x_config tda827x_cfg_2 = {
 };
 
 static struct tda827x_config tda827x_cfg_2_sw42 = {
-	.tuner_callback = saa7134_tuner_callback,
 	.init = philips_tda827x_tuner_init,
 	.sleep = philips_tda827x_tuner_sleep,
 	.config = 2,
@@ -836,7 +832,6 @@ static int ads_duo_tuner_sleep(struct dvb_frontend *fe)
 }
 
 static struct tda827x_config ads_duo_cfg = {
-	.tuner_callback = saa7134_tuner_callback,
 	.init = ads_duo_tuner_init,
 	.sleep = ads_duo_tuner_sleep,
 	.config = 0
@@ -1366,6 +1361,8 @@ static int dvb_init(struct saa7134_dev *dev)
 		printk(KERN_ERR "%s/dvb: frontend initialization failed\n", dev->name);
 		return -1;
 	}
+	/* define general-purpose callback pointer */
+	dev->dvb.frontend->callback = saa7134_tuner_callback;
 
 	/* register everything else */
 	ret = videobuf_dvb_register(&dev->dvb, THIS_MODULE, dev, &dev->pci->dev,

drivers/media/video/saa7134/saa7134.h

@@ -653,7 +653,7 @@ extern struct pci_device_id __devinitdata saa7134_pci_tbl[];
 
 extern int saa7134_board_init1(struct saa7134_dev *dev);
 extern int saa7134_board_init2(struct saa7134_dev *dev);
-int saa7134_tuner_callback(void *priv, int command, int arg);
+int saa7134_tuner_callback(void *priv, int component, int command, int arg);
 
 
 /* ----------------------------------------------------------- */

drivers/media/video/tuner-core.c

@@ -92,7 +92,6 @@ struct tuner {
 
 	unsigned int        type; /* chip type id */
 	unsigned int        config;
-	int (*tuner_callback) (void *dev, int command, int arg);
 	const char          *name;
 };
 
@@ -346,7 +345,7 @@ static struct xc5000_config xc5000_cfg;
 
 static void set_type(struct i2c_client *c, unsigned int type,
 		     unsigned int new_mode_mask, unsigned int new_config,
-		     int (*tuner_callback) (void *dev, int command,int arg))
+		     int (*tuner_callback) (void *dev, int component, int cmd, int arg))
 {
 	struct tuner *t = i2c_get_clientdata(c);
 	struct dvb_tuner_ops *fe_tuner_ops = &t->fe.ops.tuner_ops;
@@ -362,7 +361,7 @@ static void set_type(struct i2c_client *c, unsigned int type,
 	t->config = new_config;
 	if (tuner_callback != NULL) {
 		tuner_dbg("defining GPIO callback\n");
-		t->tuner_callback = tuner_callback;
+		t->fe.callback = tuner_callback;
 	}
 
 	if (t->mode == T_UNINITIALIZED) {
@@ -385,7 +384,6 @@ static void set_type(struct i2c_client *c, unsigned int type,
 	{
 		struct tda829x_config cfg = {
 			.lna_cfg        = t->config,
-			.tuner_callback = t->tuner_callback,
 		};
 		if (!dvb_attach(tda829x_attach, &t->fe, t->i2c->adapter,
 				t->i2c->addr, &cfg))
@@ -433,7 +431,6 @@ static void set_type(struct i2c_client *c, unsigned int type,
 		struct xc2028_config cfg = {
 			.i2c_adap  = t->i2c->adapter,
 			.i2c_addr  = t->i2c->addr,
-			.callback  = t->tuner_callback,
 		};
 		if (!dvb_attach(xc2028_attach, &t->fe, &cfg))
 			goto attach_failed;
@@ -450,7 +447,6 @@ static void set_type(struct i2c_client *c, unsigned int type,
 
 		xc5000_cfg.i2c_address	  = t->i2c->addr;
 		xc5000_cfg.if_khz	  = 5380;
-		xc5000_cfg.tuner_callback = t->tuner_callback;
 		if (!dvb_attach(xc5000_attach,
 				&t->fe, t->i2c->adapter, &xc5000_cfg))
 			goto attach_failed;
@@ -1224,7 +1220,7 @@ register_client:
 	} else {
 		t->mode = V4L2_TUNER_DIGITAL_TV;
 	}
-	set_type(client, t->type, t->mode_mask, t->config, t->tuner_callback);
+	set_type(client, t->type, t->mode_mask, t->config, t->fe.callback);
 	list_add_tail(&t->list, &tuner_list);
 	return 0;
 }

include/media/tuner.h

@@ -179,7 +179,7 @@ struct tuner_setup {
 	unsigned int	type;   /* Tuner type */
 	unsigned int	mode_mask;  /* Allowed tuner modes */
 	unsigned int	config; /* configuraion for more complex tuners */
-	int (*tuner_callback) (void *dev, int command,int arg);
+	int (*tuner_callback) (void *dev, int component, int cmd, int arg);
 };
 
 #endif /* __KERNEL__ */