Merge branch 'linus' into core/rcu

Documentation/00-INDEX

@@ -42,14 +42,8 @@ IRQ.txt
 	- description of what an IRQ is.
 ManagementStyle
 	- how to (attempt to) manage kernel hackers.
-MSI-HOWTO.txt
-	- the Message Signaled Interrupts (MSI) Driver Guide HOWTO and FAQ.
 RCU/
 	- directory with info on RCU (read-copy update).
-README.DAC960
-	- info on Mylex DAC960/DAC1100 PCI RAID Controller Driver for Linux.
-README.cycladesZ
-	- info on Cyclades-Z firmware loading.
 SAK.txt
 	- info on Secure Attention Keys.
 SM501.txt
@@ -86,20 +80,16 @@ blackfin/
 	- directory with documentation for the Blackfin arch.
 block/
 	- info on the Block I/O (BIO) layer.
+blockdev/
+	- info on block devices & drivers
 cachetlb.txt
 	- describes the cache/TLB flushing interfaces Linux uses.
-cciss.txt
-	- info, major/minor #'s for Compaq's SMART Array Controllers.
 cdrom/
 	- directory with information on the CD-ROM drivers that Linux has.
-computone.txt
-	- info on Computone Intelliport II/Plus Multiport Serial Driver.
 connector/
 	- docs on the netlink based userspace<->kernel space communication mod.
 console/
 	- documentation on Linux console drivers.
-cpqarray.txt
-	- info on using Compaq's SMART2 Intelligent Disk Array Controllers.
 cpu-freq/
 	- info on CPU frequency and voltage scaling.
 cpu-hotplug.txt
@@ -126,8 +116,6 @@ device-mapper/
 	- directory with info on Device Mapper.
 devices.txt
 	- plain ASCII listing of all the nodes in /dev/ with major minor #'s.
-digiepca.txt
-	- info on Digi Intl. {PC,PCI,EISA}Xx and Xem series cards.
 dontdiff
 	- file containing a list of files that should never be diff'ed.
 driver-model/
@@ -152,14 +140,10 @@ filesystems/
 	- info on the vfs and the various filesystems that Linux supports.
 firmware_class/
 	- request_firmware() hotplug interface info.
-floppy.txt
-	- notes and driver options for the floppy disk driver.
 frv/
 	- Fujitsu FR-V Linux documentation.
 gpio.txt
 	- overview of GPIO (General Purpose Input/Output) access conventions.
-hayes-esp.txt
-	- info on using the Hayes ESP serial driver.
 highuid.txt
 	- notes on the change from 16 bit to 32 bit user/group IDs.
 timers/
@@ -186,8 +170,6 @@ io_ordering.txt
 	- info on ordering I/O writes to memory-mapped addresses.
 ioctl/
 	- directory with documents describing various IOCTL calls.
-ioctl-number.txt
-	- how to implement and register device/driver ioctl calls.
 iostats.txt
 	- info on I/O statistics Linux kernel provides.
 irqflags-tracing.txt
@@ -250,14 +232,10 @@ mips/
 	- directory with info about Linux on MIPS architecture.
 mono.txt
 	- how to execute Mono-based .NET binaries with the help of BINFMT_MISC.
-moxa-smartio
-	- file with info on installing/using Moxa multiport serial driver.
 mutex-design.txt
 	- info on the generic mutex subsystem.
 namespaces/
 	- directory with various information about namespaces
-nbd.txt
-	- info on a TCP implementation of a network block device.
 netlabel/
 	- directory with information on the NetLabel subsystem.
 networking/
@@ -270,8 +248,6 @@ numastat.txt
 	- info on how to read Numa policy hit/miss statistics in sysfs.
 oops-tracing.txt
 	- how to decode those nasty internal kernel error dump messages.
-paride.txt
-	- information about the parallel port IDE subsystem.
 parisc/
 	- directory with info on using Linux on PA-RISC architecture.
 parport.txt
@@ -290,20 +266,16 @@ powerpc/
 	- directory with info on using Linux with the PowerPC.
 preempt-locking.txt
 	- info on locking under a preemptive kernel.
+printk-formats.txt
+	- how to get printk format specifiers right
 prio_tree.txt
 	- info on radix-priority-search-tree use for indexing vmas.
-ramdisk.txt
-	- short guide on how to set up and use the RAM disk.
 rbtree.txt
 	- info on what red-black trees are and what they are for.
-riscom8.txt
-	- notes on using the RISCom/8 multi-port serial driver.
 robust-futex-ABI.txt
 	- documentation of the robust futex ABI.
 robust-futexes.txt
 	- a description of what robust futexes are.
-rocket.txt
-	- info on the Comtrol RocketPort multiport serial driver.
 rt-mutex-design.txt
 	- description of the RealTime mutex implementation design.
 rt-mutex.txt
@@ -332,8 +304,6 @@ sparc/
 	- directory with info on using Linux on Sparc architecture.
 sparse.txt
 	- info on how to obtain and use the sparse tool for typechecking.
-specialix.txt
-	- info on hardware/driver for specialix IO8+ multiport serial card.
 spi/
 	- overview of Linux kernel Serial Peripheral Interface (SPI) support.
 spinlocks.txt
@@ -342,14 +312,10 @@ stable_api_nonsense.txt
 	- info on why the kernel does not have a stable in-kernel api or abi.
 stable_kernel_rules.txt
 	- rules and procedures for the -stable kernel releases.
-stallion.txt
-	- info on using the Stallion multiport serial driver.
 svga.txt
 	- short guide on selecting video modes at boot via VGA BIOS.
 sysfs-rules.txt
 	- How not to use sysfs.
-sx.txt
-	- info on the Specialix SX/SI multiport serial driver.
 sysctl/
 	- directory with info on the /proc/sys/* files.
 sysrq.txt
@@ -358,8 +324,6 @@ telephony/
 	- directory with info on telephony (e.g. voice over IP) support.
 time_interpolators.txt
 	- info on time interpolators.
-tty.txt
-	- guide to the locking policies of the tty layer.
 uml/
 	- directory with information about User Mode Linux.
 unicode.txt

Documentation/ABI/testing/sysfs-c2port

@@ -0,0 +1,88 @@
+What:		/sys/class/c2port/
+Date:		October 2008
+Contact:	Rodolfo Giometti <giometti@linux.it>
+Description:
+		The /sys/class/c2port/ directory will contain files and
+		directories that will provide a unified interface to
+		the C2 port interface.
+
+What:		/sys/class/c2port/c2portX
+Date:		October 2008
+Contact:	Rodolfo Giometti <giometti@linux.it>
+Description:
+		The /sys/class/c2port/c2portX/ directory is related to X-th
+		C2 port into the system. Each directory will contain files to
+		manage and control its C2 port.
+
+What:		/sys/class/c2port/c2portX/access
+Date:		October 2008
+Contact:	Rodolfo Giometti <giometti@linux.it>
+Description:
+		The /sys/class/c2port/c2portX/access file enable the access
+		to the C2 port from the system. No commands can be sent
+		till this entry is set to 0.
+
+What:		/sys/class/c2port/c2portX/dev_id
+Date:		October 2008
+Contact:	Rodolfo Giometti <giometti@linux.it>
+Description:
+		The /sys/class/c2port/c2portX/dev_id file show the device ID
+		of the connected micro.
+
+What:		/sys/class/c2port/c2portX/flash_access
+Date:		October 2008
+Contact:	Rodolfo Giometti <giometti@linux.it>
+Description:
+		The /sys/class/c2port/c2portX/flash_access file enable the
+		access to the on-board flash of the connected micro.
+		No commands can be sent till this entry is set to 0.
+
+What:		/sys/class/c2port/c2portX/flash_block_size
+Date:		October 2008
+Contact:	Rodolfo Giometti <giometti@linux.it>
+Description:
+		The /sys/class/c2port/c2portX/flash_block_size file show
+		the on-board flash block size of the connected micro.
+
+What:		/sys/class/c2port/c2portX/flash_blocks_num
+Date:		October 2008
+Contact:	Rodolfo Giometti <giometti@linux.it>
+Description:
+		The /sys/class/c2port/c2portX/flash_blocks_num file show
+		the on-board flash blocks number of the connected micro.
+
+What:		/sys/class/c2port/c2portX/flash_data
+Date:		October 2008
+Contact:	Rodolfo Giometti <giometti@linux.it>
+Description:
+		The /sys/class/c2port/c2portX/flash_data file export
+		the content of the on-board flash of the connected micro.
+
+What:		/sys/class/c2port/c2portX/flash_erase
+Date:		October 2008
+Contact:	Rodolfo Giometti <giometti@linux.it>
+Description:
+		The /sys/class/c2port/c2portX/flash_erase file execute
+		the "erase" command on the on-board flash of the connected
+		micro.
+
+What:		/sys/class/c2port/c2portX/flash_erase
+Date:		October 2008
+Contact:	Rodolfo Giometti <giometti@linux.it>
+Description:
+		The /sys/class/c2port/c2portX/flash_erase file show the
+		on-board flash size of the connected micro.
+
+What:		/sys/class/c2port/c2portX/reset
+Date:		October 2008
+Contact:	Rodolfo Giometti <giometti@linux.it>
+Description:
+		The /sys/class/c2port/c2portX/reset file execute a "reset"
+		command on the connected micro.
+
+What:		/sys/class/c2port/c2portX/rev_id
+Date:		October 2008
+Contact:	Rodolfo Giometti <giometti@linux.it>
+Description:
+		The /sys/class/c2port/c2portX/rev_id file show the revision ID
+		of the connected micro.

Documentation/ABI/testing/sysfs-firmware-acpi

@@ -89,7 +89,7 @@ Description:
 
 		error - an interrupt that can't be accounted for above.
 
-		invalid: it's either a wakeup GPE or a GPE/Fixed Event that
+		invalid: it's either a GPE or a Fixed Event that
 			doesn't have an event handler.
 
 		disable: the GPE/Fixed Event is valid but disabled.
@@ -117,30 +117,30 @@ Description:
 		and other user space applications so that the machine won't shutdown
 		when pressing the power button.
 		# cat ff_pwr_btn
-		0
+		0	enabled
 		# press the power button for 3 times;
 		# cat ff_pwr_btn
-		3
+		3	enabled
 		# echo disable > ff_pwr_btn
 		# cat ff_pwr_btn
-		disable
+		3	disabled
 		# press the power button for 3 times;
 		# cat ff_pwr_btn
-		disable
+		3	disabled
 		# echo enable > ff_pwr_btn
 		# cat ff_pwr_btn
-		4
+		4	enabled
 		/*
 		 * this is because the status bit is set even if the enable bit is cleared,
 		 * and it triggers an ACPI fixed event when the enable bit is set again
 		 */
 		# press the power button for 3 times;
 		# cat ff_pwr_btn
-		7
+		7	enabled
 		# echo disable > ff_pwr_btn
 		# press the power button for 3 times;
 		# echo clear > ff_pwr_btn	/* clear the status bit */
 		# echo disable > ff_pwr_btn
 		# cat ff_pwr_btn
-		7
+		7	enabled
 

Documentation/DMA-API.txt

@@ -316,12 +316,10 @@ reduce current DMA mapping usage or delay and try again later).
 	pci_map_sg(struct pci_dev *hwdev, struct scatterlist *sg,
 		int nents, int direction)
 
-Maps a scatter gather list from the block layer.
-
 Returns: the number of physical segments mapped (this may be shorter
-than <nents> passed in if the block layer determines that some
-elements of the scatter/gather list are physically adjacent and thus
-may be mapped with a single entry).
+than <nents> passed in if some elements of the scatter/gather list are
+physically or virtually adjacent and an IOMMU maps them with a single
+entry).
 
 Please note that the sg cannot be mapped again if it has been mapped once.
 The mapping process is allowed to destroy information in the sg.

Documentation/PCI/00-INDEX

@@ -1,5 +1,7 @@
 00-INDEX
 	- this file
+MSI-HOWTO.txt
+	- the Message Signaled Interrupts (MSI) Driver Guide HOWTO and FAQ.
 PCI-DMA-mapping.txt
 	- info for PCI drivers using DMA portably across all platforms
 PCIEBUS-HOWTO.txt

Documentation/acpi/debug.txt

@@ -0,0 +1,148 @@
+			ACPI Debug Output
+
+
+The ACPI CA, the Linux ACPI core, and some ACPI drivers can generate debug
+output.  This document describes how to use this facility.
+
+Compile-time configuration
+--------------------------
+
+ACPI debug output is globally enabled by CONFIG_ACPI_DEBUG.  If this config
+option is turned off, the debug messages are not even built into the
+kernel.
+
+Boot- and run-time configuration
+--------------------------------
+
+When CONFIG_ACPI_DEBUG=y, you can select the component and level of messages
+you're interested in.  At boot-time, use the acpi.debug_layer and
+acpi.debug_level kernel command line options.  After boot, you can use the
+debug_layer and debug_level files in /sys/module/acpi/parameters/ to control
+the debug messages.
+
+debug_layer (component)
+-----------------------
+
+The "debug_layer" is a mask that selects components of interest, e.g., a
+specific driver or part of the ACPI interpreter.  To build the debug_layer
+bitmask, look for the "#define _COMPONENT" in an ACPI source file.
+
+You can set the debug_layer mask at boot-time using the acpi.debug_layer
+command line argument, and you can change it after boot by writing values
+to /sys/module/acpi/parameters/debug_layer.
+
+The possible components are defined in include/acpi/acoutput.h and
+include/acpi/acpi_drivers.h.  Reading /sys/module/acpi/parameters/debug_layer
+shows the supported mask values, currently these:
+
+    ACPI_UTILITIES                  0x00000001
+    ACPI_HARDWARE                   0x00000002
+    ACPI_EVENTS                     0x00000004
+    ACPI_TABLES                     0x00000008
+    ACPI_NAMESPACE                  0x00000010
+    ACPI_PARSER                     0x00000020
+    ACPI_DISPATCHER                 0x00000040
+    ACPI_EXECUTER                   0x00000080
+    ACPI_RESOURCES                  0x00000100
+    ACPI_CA_DEBUGGER                0x00000200
+    ACPI_OS_SERVICES                0x00000400
+    ACPI_CA_DISASSEMBLER            0x00000800
+    ACPI_COMPILER                   0x00001000
+    ACPI_TOOLS                      0x00002000
+    ACPI_BUS_COMPONENT              0x00010000
+    ACPI_AC_COMPONENT               0x00020000
+    ACPI_BATTERY_COMPONENT          0x00040000
+    ACPI_BUTTON_COMPONENT           0x00080000
+    ACPI_SBS_COMPONENT              0x00100000
+    ACPI_FAN_COMPONENT              0x00200000
+    ACPI_PCI_COMPONENT              0x00400000
+    ACPI_POWER_COMPONENT            0x00800000
+    ACPI_CONTAINER_COMPONENT        0x01000000
+    ACPI_SYSTEM_COMPONENT           0x02000000
+    ACPI_THERMAL_COMPONENT          0x04000000
+    ACPI_MEMORY_DEVICE_COMPONENT    0x08000000
+    ACPI_VIDEO_COMPONENT            0x10000000
+    ACPI_PROCESSOR_COMPONENT        0x20000000
+
+debug_level
+-----------
+
+The "debug_level" is a mask that selects different types of messages, e.g.,
+those related to initialization, method execution, informational messages, etc.
+To build debug_level, look at the level specified in an ACPI_DEBUG_PRINT()
+statement.
+
+The ACPI interpreter uses several different levels, but the Linux
+ACPI core and ACPI drivers generally only use ACPI_LV_INFO.
+
+You can set the debug_level mask at boot-time using the acpi.debug_level
+command line argument, and you can change it after boot by writing values
+to /sys/module/acpi/parameters/debug_level.
+
+The possible levels are defined in include/acpi/acoutput.h.  Reading
+/sys/module/acpi/parameters/debug_level shows the supported mask values,
+currently these:
+
+    ACPI_LV_INIT                    0x00000001
+    ACPI_LV_DEBUG_OBJECT            0x00000002
+    ACPI_LV_INFO                    0x00000004
+    ACPI_LV_INIT_NAMES              0x00000020
+    ACPI_LV_PARSE                   0x00000040
+    ACPI_LV_LOAD                    0x00000080
+    ACPI_LV_DISPATCH                0x00000100
+    ACPI_LV_EXEC                    0x00000200
+    ACPI_LV_NAMES                   0x00000400
+    ACPI_LV_OPREGION                0x00000800
+    ACPI_LV_BFIELD                  0x00001000
+    ACPI_LV_TABLES                  0x00002000
+    ACPI_LV_VALUES                  0x00004000
+    ACPI_LV_OBJECTS                 0x00008000
+    ACPI_LV_RESOURCES               0x00010000
+    ACPI_LV_USER_REQUESTS           0x00020000
+    ACPI_LV_PACKAGE                 0x00040000
+    ACPI_LV_ALLOCATIONS             0x00100000
+    ACPI_LV_FUNCTIONS               0x00200000
+    ACPI_LV_OPTIMIZATIONS           0x00400000
+    ACPI_LV_MUTEX                   0x01000000
+    ACPI_LV_THREADS                 0x02000000
+    ACPI_LV_IO                      0x04000000
+    ACPI_LV_INTERRUPTS              0x08000000
+    ACPI_LV_AML_DISASSEMBLE         0x10000000
+    ACPI_LV_VERBOSE_INFO            0x20000000
+    ACPI_LV_FULL_TABLES             0x40000000
+    ACPI_LV_EVENTS                  0x80000000
+
+Examples
+--------
+
+For example, drivers/acpi/bus.c contains this:
+
+    #define _COMPONENT              ACPI_BUS_COMPONENT
+    ...
+    ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Device insertion detected\n"));
+
+To turn on this message, set the ACPI_BUS_COMPONENT bit in acpi.debug_layer
+and the ACPI_LV_INFO bit in acpi.debug_level.  (The ACPI_DEBUG_PRINT
+statement uses ACPI_DB_INFO, which is macro based on the ACPI_LV_INFO
+definition.)
+
+Enable all AML "Debug" output (stores to the Debug object while interpreting
+AML) during boot:
+
+    acpi.debug_layer=0xffffffff acpi.debug_level=0x2
+
+Enable PCI and PCI interrupt routing debug messages:
+
+    acpi.debug_layer=0x400000 acpi.debug_level=0x4
+
+Enable all ACPI hardware-related messages:
+
+    acpi.debug_layer=0x2 acpi.debug_level=0xffffffff
+
+Enable all ACPI_DB_INFO messages after boot:
+
+    # echo 0x4 > /sys/module/acpi/parameters/debug_level
+
+Show all valid component values:
+
+    # cat /sys/module/acpi/parameters/debug_layer

Documentation/arm/mem_alignment

@@ -24,7 +24,7 @@ real bad - it changes the behaviour of all unaligned instructions in user
 space, and might cause programs to fail unexpectedly.
 
 To change the alignment trap behavior, simply echo a number into
-/proc/sys/debug/alignment.  The number is made up from various bits:
+/proc/cpu/alignment.  The number is made up from various bits:
 
 bit		behavior when set
 ---		-----------------

Documentation/blockdev/00-INDEX

@@ -0,0 +1,16 @@
+00-INDEX
+	- this file
+README.DAC960
+	- info on Mylex DAC960/DAC1100 PCI RAID Controller Driver for Linux.
+cciss.txt
+	- info, major/minor #'s for Compaq's SMART Array Controllers.
+cpqarray.txt
+	- info on using Compaq's SMART2 Intelligent Disk Array Controllers.
+floppy.txt
+	- notes and driver options for the floppy disk driver.
+nbd.txt
+	- info on a TCP implementation of a network block device.
+paride.txt
+	- information about the parallel port IDE subsystem.
+ramdisk.txt
+	- short guide on how to set up and use the RAM disk.

Documentation/cciss.txt → Documentation/blockdev/cciss.txt

@@ -21,11 +21,14 @@ This driver is known to work with the following cards:
 	* SA E200
 	* SA E200i
 	* SA E500
+	* SA P700m
 	* SA P212
 	* SA P410
 	* SA P410i
 	* SA P411
 	* SA P812
+	* SA P712m
+	* SA P711m
 
 Detecting drive failures:
 -------------------------

Documentation/c2port.txt

@@ -0,0 +1,90 @@
+			C2 port support
+			---------------
+
+(C) Copyright 2007 Rodolfo Giometti <giometti@enneenne.com>
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+
+
+Overview
+--------
+
+This driver implements the support for Linux of Silicon Labs (Silabs)
+C2 Interface used for in-system programming of micro controllers.
+
+By using this driver you can reprogram the in-system flash without EC2
+or EC3 debug adapter. This solution is also useful in those systems
+where the micro controller is connected via special GPIOs pins.
+
+References
+----------
+
+The C2 Interface main references are at (http://www.silabs.com)
+Silicon Laboratories site], see:
+
+- AN127: FLASH Programming via the C2 Interface at
+http://www.silabs.com/public/documents/tpub_doc/anote/Microcontrollers/Small_Form_Factor/en/an127.pdf, and
+
+- C2 Specification at
+http://www.silabs.com/public/documents/tpub_doc/spec/Microcontrollers/en/C2spec.pdf,
+
+however it implements a two wire serial communication protocol (bit
+banging) designed to enable in-system programming, debugging, and
+boundary-scan testing on low pin-count Silicon Labs devices. Currently
+this code supports only flash programming but extensions are easy to
+add.
+
+Using the driver
+----------------
+
+Once the driver is loaded you can use sysfs support to get C2port's
+info or read/write in-system flash.
+
+# ls /sys/class/c2port/c2port0/
+access            flash_block_size  flash_erase       rev_id
+dev_id            flash_blocks_num  flash_size        subsystem/
+flash_access      flash_data        reset             uevent
+
+Initially the C2port access is disabled since you hardware may have
+such lines multiplexed with other devices so, to get access to the
+C2port, you need the command:
+
+# echo 1 > /sys/class/c2port/c2port0/access
+
+after that you should read the device ID and revision ID of the
+connected micro controller:
+
+# cat /sys/class/c2port/c2port0/dev_id
+8
+# cat /sys/class/c2port/c2port0/rev_id
+1
+
+However, for security reasons, the in-system flash access in not
+enabled yet, to do so you need the command:
+
+# echo 1 > /sys/class/c2port/c2port0/flash_access
+
+After that you can read the whole flash:
+
+# cat /sys/class/c2port/c2port0/flash_data > image
+
+erase it:
+
+# echo 1 > /sys/class/c2port/c2port0/flash_erase
+
+and write it:
+
+# cat image > /sys/class/c2port/c2port0/flash_data
+
+after writing you have to reset the device to execute the new code:
+
+# echo 1 > /sys/class/c2port/c2port0/reset

Documentation/cgroups/freezer-subsystem.txt

@@ -1,4 +1,4 @@
-	The cgroup freezer is useful to batch job management system which start
+The cgroup freezer is useful to batch job management system which start
 and stop sets of tasks in order to schedule the resources of a machine
 according to the desires of a system administrator. This sort of program
 is often used on HPC clusters to schedule access to the cluster as a
@@ -6,7 +6,7 @@ whole. The cgroup freezer uses cgroups to describe the set of tasks to
 be started/stopped by the batch job management system. It also provides
 a means to start and stop the tasks composing the job.
 
-	The cgroup freezer will also be useful for checkpointing running groups
+The cgroup freezer will also be useful for checkpointing running groups
 of tasks. The freezer allows the checkpoint code to obtain a consistent
 image of the tasks by attempting to force the tasks in a cgroup into a
 quiescent state. Once the tasks are quiescent another task can
@@ -16,7 +16,7 @@ recoverable error occur. This also allows the checkpointed tasks to be
 migrated between nodes in a cluster by copying the gathered information
 to another node and restarting the tasks there.
 
-	Sequences of SIGSTOP and SIGCONT are not always sufficient for stopping
+Sequences of SIGSTOP and SIGCONT are not always sufficient for stopping
 and resuming tasks in userspace. Both of these signals are observable
 from within the tasks we wish to freeze. While SIGSTOP cannot be caught,
 blocked, or ignored it can be seen by waiting or ptracing parent tasks.
@@ -37,26 +37,29 @@ demonstrate this problem using nested bash shells:
 
 	<at this point 16990 exits and causes 16644 to exit too>
 
-	This happens because bash can observe both signals and choose how it
+This happens because bash can observe both signals and choose how it
 responds to them.
 
-	Another example of a program which catches and responds to these
+Another example of a program which catches and responds to these
 signals is gdb. In fact any program designed to use ptrace is likely to
 have a problem with this method of stopping and resuming tasks.
 
-	 In contrast, the cgroup freezer uses the kernel freezer code to
+In contrast, the cgroup freezer uses the kernel freezer code to
 prevent the freeze/unfreeze cycle from becoming visible to the tasks
 being frozen. This allows the bash example above and gdb to run as
 expected.
 
-	The freezer subsystem in the container filesystem defines a file named
+The freezer subsystem in the container filesystem defines a file named
 freezer.state. Writing "FROZEN" to the state file will freeze all tasks in the
 cgroup. Subsequently writing "THAWED" will unfreeze the tasks in the cgroup.
 Reading will return the current state.
 
+Note freezer.state doesn't exist in root cgroup, which means root cgroup
+is non-freezable.
+
 * Examples of usage :
 
-   # mkdir /containers/freezer
+   # mkdir /containers
    # mount -t cgroup -ofreezer freezer  /containers
    # mkdir /containers/0
    # echo $some_pid > /containers/0/tasks
@@ -94,6 +97,6 @@ things happens:
 		the freezer.state file
 	2) Userspace retries the freezing operation by writing "FROZEN" to
 		the freezer.state file (writing "FREEZING" is not legal
-		and returns EIO)
+		and returns EINVAL)
 	3) The tasks that blocked the cgroup from entering the "FROZEN"
 		state disappear from the cgroup's set of tasks.

Documentation/cpu-freq/user-guide.txt

@@ -23,6 +23,7 @@ Contents:
 1.3 sparc64
 1.4 ppc
 1.5 SuperH
+1.6 Blackfin
 
 2. "Policy" / "Governor"?
 2.1 Policy
@@ -97,6 +98,17 @@ The following SuperH processors are supported by cpufreq:
 SH-3
 SH-4
 
+1.6 Blackfin
+------------
+
+The following Blackfin processors are supported by cpufreq:
+
+BF522, BF523, BF524, BF525, BF526, BF527, Rev 0.1 or higher
+BF531, BF532, BF533, Rev 0.3 or higher
+BF534, BF536, BF537, Rev 0.2 or higher
+BF561, Rev 0.3 or higher
+BF542, BF544, BF547, BF548, BF549, Rev 0.1 or higher
+
 
 2. "Policy" / "Governor" ?
 ==========================

Documentation/email-clients.txt

@@ -213,4 +213,29 @@ TkRat (GUI)
 
 Works.  Use "Insert file..." or external editor.
 
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Gmail (Web GUI)
+
+If you just have to use Gmail to send patches, it CAN be made to work.  It
+requires a bit of external help, though.
+
+The first problem is that Gmail converts tabs to spaces.  This will
+totally break your patches.  To prevent this, you have to use a different
+editor.  There is a firefox extension called "ViewSourceWith"
+(https://addons.mozilla.org/en-US/firefox/addon/394) which allows you to
+edit any text box in the editor of your choice.  Configure it to launch
+your favorite editor.  When you want to send a patch, use this technique.
+Once you have crafted your messsage + patch, save and exit the editor,
+which should reload the Gmail edit box.  GMAIL WILL PRESERVE THE TABS.
+Hoorah.  Apparently you can cut-n-paste literal tabs, but Gmail will
+convert those to spaces upon sending!
+
+The second problem is that Gmail converts tabs to spaces on replies.  If
+you reply to a patch, don't expect to be able to apply it as a patch.
+
+The last problem is that Gmail will base64-encode any message that has a
+non-ASCII character.  That includes things like European names.  Be aware.
+
+Gmail is not convenient for lkml patches, but CAN be made to work.
+
                                 ###

Documentation/feature-removal-schedule.txt

@@ -56,30 +56,6 @@ Who:	Mauro Carvalho Chehab <mchehab@infradead.org>
 
 ---------------------------
 
-What:	old tuner-3036 i2c driver
-When:	2.6.28
-Why:	This driver is for VERY old i2c-over-parallel port teletext receiver
-	boxes. Rather then spending effort on converting this driver to V4L2,
-	and since it is extremely unlikely that anyone still uses one of these
-	devices, it was decided to drop it.
-Who:	Hans Verkuil <hverkuil@xs4all.nl>
-	Mauro Carvalho Chehab <mchehab@infradead.org>
-
- ---------------------------
-
-What:   V4L2 dpc7146 driver
-When:   2.6.28
-Why:    Old driver for the dpc7146 demonstration board that is no longer
-	relevant. The last time this was tested on actual hardware was
-	probably around 2002. Since this is a driver for a demonstration
-	board the decision was made to remove it rather than spending a
-	lot of effort continually updating this driver to stay in sync
-	with the latest internal V4L2 or I2C API.
-Who:    Hans Verkuil <hverkuil@xs4all.nl>
-	Mauro Carvalho Chehab <mchehab@infradead.org>
-
----------------------------
-
 What:	PCMCIA control ioctl (needed for pcmcia-cs [cardmgr, cardctl])
 When:	November 2005
 Files:	drivers/pcmcia/: pcmcia_ioctl.c

Documentation/filesystems/ocfs2.txt

@@ -28,10 +28,7 @@ Manish Singh  <manish.singh@oracle.com>
 Caveats
 =======
 Features which OCFS2 does not support yet:
-	- extended attributes
 	- quotas
-	- cluster aware flock
-	- cluster aware lockf
 	- Directory change notification (F_NOTIFY)
 	- Distributed Caching (F_SETLEASE/F_GETLEASE/break_lease)
 	- POSIX ACLs

Documentation/filesystems/proc.txt

@@ -44,6 +44,7 @@ Table of Contents
   2.14	/proc/<pid>/io - Display the IO accounting fields
   2.15	/proc/<pid>/coredump_filter - Core dump filtering settings
   2.16	/proc/<pid>/mountinfo - Information about mounts
+  2.17	/proc/sys/fs/epoll - Configuration options for the epoll interface
 
 ------------------------------------------------------------------------------
 Preface
@@ -2483,4 +2484,30 @@ For more information on mount propagation see:
 
   Documentation/filesystems/sharedsubtree.txt
 
+2.17	/proc/sys/fs/epoll - Configuration options for the epoll interface
+--------------------------------------------------------
+
+This directory contains configuration options for the epoll(7) interface.
+
+max_user_instances
+------------------
+
+This is the maximum number of epoll file descriptors that a single user can
+have open at a given time. The default value is 128, and should be enough
+for normal users.
+
+max_user_watches
+----------------
+
+Every epoll file descriptor can store a number of files to be monitored
+for event readiness. Each one of these monitored files constitutes a "watch".
+This configuration option sets the maximum number of "watches" that are
+allowed for each user.
+Each "watch" costs roughly 90 bytes on a 32bit kernel, and roughly 160 bytes
+on a 64bit one.
+The current default value for  max_user_watches  is the 1/32 of the available
+low memory, divided for the "watch" cost in bytes.
+
+
 ------------------------------------------------------------------------------
+

Documentation/filesystems/ramfs-rootfs-initramfs.txt

@@ -130,12 +130,12 @@ The 2.6 kernel build process always creates a gzipped cpio format initramfs
 archive and links it into the resulting kernel binary.  By default, this
 archive is empty (consuming 134 bytes on x86).
 
-The config option CONFIG_INITRAMFS_SOURCE (for some reason buried under
-devices->block devices in menuconfig, and living in usr/Kconfig) can be used
-to specify a source for the initramfs archive, which will automatically be
-incorporated into the resulting binary.  This option can point to an existing
-gzipped cpio archive, a directory containing files to be archived, or a text
-file specification such as the following example:
+The config option CONFIG_INITRAMFS_SOURCE (in General Setup in menuconfig,
+and living in usr/Kconfig) can be used to specify a source for the
+initramfs archive, which will automatically be incorporated into the
+resulting binary.  This option can point to an existing gzipped cpio
+archive, a directory containing files to be archived, or a text file
+specification such as the following example:
 
   dir /dev 755 0 0
   nod /dev/console 644 0 0 c 5 1

Documentation/filesystems/vfat.txt

@@ -8,6 +8,12 @@ if you want to format from within Linux.
 
 VFAT MOUNT OPTIONS
 ----------------------------------------------------------------------
+uid=###       -- Set the owner of all files on this filesystem.
+		 The default is the uid of current process.
+
+gid=###       -- Set the group of all files on this filesystem.
+		 The default is the gid of current process.
+
 umask=###     -- The permission mask (for files and directories, see umask(1)).
                  The default is the umask of current process.
 
@@ -36,7 +42,7 @@ codepage=###  -- Sets the codepage number for converting to shortname
 		 characters on FAT filesystem.
 		 By default, FAT_DEFAULT_CODEPAGE setting is used.
 
-iocharset=name -- Character set to use for converting between the
+iocharset=<name> -- Character set to use for converting between the
 		 encoding is used for user visible filename and 16 bit
 		 Unicode characters. Long filenames are stored on disk
 		 in Unicode format, but Unix for the most part doesn't
@@ -86,6 +92,8 @@ check=s|r|n   -- Case sensitivity checking setting.
                  r: relaxed, case insensitive
                  n: normal, default setting, currently case insensitive
 
+nocase        -- This was deprecated for vfat. Use shortname=win95 instead.
+
 shortname=lower|win95|winnt|mixed
 	      -- Shortname display/create setting.
 		 lower: convert to lowercase for display,
@@ -99,11 +107,31 @@ shortname=lower|win95|winnt|mixed
 tz=UTC        -- Interpret timestamps as UTC rather than local time.
                  This option disables the conversion of timestamps
                  between local time (as used by Windows on FAT) and UTC
-                 (which Linux uses internally).  This is particuluarly
+                 (which Linux uses internally).  This is particularly
                  useful when mounting devices (like digital cameras)
                  that are set to UTC in order to avoid the pitfalls of
                  local time.
 
+showexec      -- If set, the execute permission bits of the file will be
+		 allowed only if the extension part of the name is .EXE,
+		 .COM, or .BAT. Not set by default.
+
+debug         -- Can be set, but unused by the current implementation.
+
+sys_immutable -- If set, ATTR_SYS attribute on FAT is handled as
+		 IMMUTABLE flag on Linux. Not set by default.
+
+flush         -- If set, the filesystem will try to flush to disk more
+		 early than normal. Not set by default.
+
+rodir	      -- FAT has the ATTR_RO (read-only) attribute. But on Windows,
+		 the ATTR_RO of the directory will be just ignored actually,
+		 and is used by only applications as flag. E.g. it's setted
+		 for the customized folder.
+
+		 If you want to use ATTR_RO as read-only flag even for
+		 the directory, set this option.
+
 <bool>: 0,1,yes,no,true,false
 
 TODO

Documentation/filesystems/xip.txt

@@ -39,10 +39,11 @@ The block device operation is optional, these block devices support it as of
 today:
 - dcssblk: s390 dcss block device driver
 
-An address space operation named get_xip_page is used to retrieve reference
-to a struct page. To address the target page, a reference to an address_space,
-and a sector number is provided. A 3rd argument indicates whether the
-function should allocate blocks if needed.
+An address space operation named get_xip_mem is used to retrieve references
+to a page frame number and a kernel address. To obtain these values a reference
+to an address_space is provided. This function assigns values to the kmem and
+pfn parameters. The third argument indicates whether the function should allocate
+blocks if needed.
 
 This address space operation is mutually exclusive with readpage&writepage that
 do page cache read/write operations.

Documentation/ftrace.txt

@@ -8,7 +8,7 @@ Copyright 2008 Red Hat Inc.
 Reviewers:   Elias Oltmanns, Randy Dunlap, Andrew Morton,
 	     John Kacur, and David Teigland.
 
-Written for: 2.6.27-rc1
+Written for: 2.6.28-rc2
 
 Introduction
 ------------
@@ -50,26 +50,26 @@ of ftrace. Here is a list of some of the key files:
 
  Note: all time values are in microseconds.
 
-  current_tracer : This is used to set or display the current tracer
+  current_tracer: This is used to set or display the current tracer
 		that is configured.
 
-  available_tracers : This holds the different types of tracers that
+  available_tracers: This holds the different types of tracers that
 		have been compiled into the kernel. The tracers
 		listed here can be configured by echoing their name
 		into current_tracer.
 
-  tracing_enabled : This sets or displays whether the current_tracer
+  tracing_enabled: This sets or displays whether the current_tracer
 		is activated and tracing or not. Echo 0 into this
 		file to disable the tracer or 1 to enable it.
 
-  trace : This file holds the output of the trace in a human readable
+  trace: This file holds the output of the trace in a human readable
 		format (described below).
 
-  latency_trace : This file shows the same trace but the information
+  latency_trace: This file shows the same trace but the information
 		is organized more to display possible latencies
 		in the system (described below).
 
-  trace_pipe : The output is the same as the "trace" file but this
+  trace_pipe: The output is the same as the "trace" file but this
 		file is meant to be streamed with live tracing.
 		Reads from this file will block until new data
 		is retrieved. Unlike the "trace" and "latency_trace"
@@ -82,11 +82,11 @@ of ftrace. Here is a list of some of the key files:
 		tracer is not adding more data, they will display
 		the same information every time they are read.
 
-  iter_ctrl : This file lets the user control the amount of data
+  iter_ctrl: This file lets the user control the amount of data
 		that is displayed in one of the above output
 		files.
 
-  trace_max_latency : Some of the tracers record the max latency.
+  trace_max_latency: Some of the tracers record the max latency.
 		For example, the time interrupts are disabled.
 		This time is saved in this file. The max trace
 		will also be stored, and displayed by either
@@ -94,29 +94,26 @@ of ftrace. Here is a list of some of the key files:
 		only be recorded if the latency is greater than
 		the value in this file. (in microseconds)
 
-  trace_entries : This sets or displays the number of trace
-		entries each CPU buffer can hold. The tracer buffers
-		are the same size for each CPU. The displayed number
-		is the size of the CPU buffer and not total size. The
+  trace_entries: This sets or displays the number of bytes each CPU
+		buffer can hold. The tracer buffers are the same size
+		for each CPU. The displayed number is the size of the
+		 CPU buffer and not total size of all buffers. The
 		trace buffers are allocated in pages (blocks of memory
 		that the kernel uses for allocation, usually 4 KB in size).
-		Since each entry is smaller than a page, if the last
-		allocated page has room for more entries than were
-		requested, the rest of the page is used to allocate
-		entries.
+		If the last page allocated has room for more bytes
+		than requested, the rest of the page will be used,
+		making the actual allocation bigger than requested.
+		(Note, the size may not be a multiple of the page size due
+		to buffer managment overhead.)
 
 		This can only be updated when the current_tracer
-		is set to "none".
+		is set to "nop".
 
-		NOTE: It is planned on changing the allocated buffers
-		      from being the number of possible CPUS to
-		      the number of online CPUS.
-
-  tracing_cpumask : This is a mask that lets the user only trace
+  tracing_cpumask: This is a mask that lets the user only trace
 		on specified CPUS. The format is a hex string
 		representing the CPUS.
 
-  set_ftrace_filter : When dynamic ftrace is configured in (see the
+  set_ftrace_filter: When dynamic ftrace is configured in (see the
 		section below "dynamic ftrace"), the code is dynamically
 		modified (code text rewrite) to disable calling of the
 		function profiler (mcount). This lets tracing be configured
@@ -130,14 +127,11 @@ of ftrace. Here is a list of some of the key files:
 		be traced. If a function exists in both set_ftrace_filter
 		and set_ftrace_notrace,	the function will _not_ be traced.
 
-  available_filter_functions : When a function is encountered the first
-		time by the dynamic tracer, it is recorded and
-		later the call is converted into a nop. This file
-		lists the functions that have been recorded
-		by the dynamic tracer and these functions can
-		be used to set the ftrace filter by the above
-		"set_ftrace_filter" file. (See the section "dynamic ftrace"
-		below for more details).
+  available_filter_functions: This lists the functions that ftrace
+		has processed and can trace. These are the function
+		names that you can pass to "set_ftrace_filter" or
+		"set_ftrace_notrace". (See the section "dynamic ftrace"
+		below for more details.)
 
 
 The Tracers
@@ -145,7 +139,7 @@ The Tracers
 
 Here is the list of current tracers that may be configured.
 
-  ftrace - function tracer that uses mcount to trace all functions.
+  function - function tracer that uses mcount to trace all functions.
 
   sched_switch - traces the context switches between tasks.
 
@@ -166,8 +160,8 @@ Here is the list of current tracers that may be configured.
 		the highest priority task to get scheduled after
 		it has been woken up.
 
-  none - This is not a tracer. To remove all tracers from tracing
-		simply echo "none" into current_tracer.
+  nop - This is not a tracer. To remove all tracers from tracing
+		simply echo "nop" into current_tracer.
 
 
 Examples of using the tracer
@@ -182,7 +176,7 @@ Output format:
 Here is an example of the output format of the file "trace"
 
                              --------
-# tracer: ftrace
+# tracer: function
 #
 #           TASK-PID   CPU#    TIMESTAMP  FUNCTION
 #              | |      |          |         |
@@ -192,7 +186,7 @@ Here is an example of the output format of the file "trace"
                              --------
 
 A header is printed with the tracer name that is represented by the trace.
-In this case the tracer is "ftrace". Then a header showing the format. Task
+In this case the tracer is "function". Then a header showing the format. Task
 name "bash", the task PID "4251", the CPU that it was running on
 "01", the timestamp in <secs>.<usecs> format, the function name that was
 traced "path_put" and the parent function that called this function
@@ -1003,22 +997,20 @@ is the stack for the hard interrupt. This hides the fact that NEED_RESCHED
 has been set. We do not see the 'N' until we switch back to the task's
 assigned stack.
 
-ftrace
-------
+function
+--------
 
-ftrace is not only the name of the tracing infrastructure, but it
-is also a name of one of the tracers. The tracer is the function
-tracer. Enabling the function tracer can be done from the
-debug file system. Make sure the ftrace_enabled is set otherwise
-this tracer is a nop.
+This tracer is the function tracer. Enabling the function tracer
+can be done from the debug file system. Make sure the ftrace_enabled is
+set; otherwise this tracer is a nop.
 
  # sysctl kernel.ftrace_enabled=1
- # echo ftrace > /debug/tracing/current_tracer
+ # echo function > /debug/tracing/current_tracer
  # echo 1 > /debug/tracing/tracing_enabled
  # usleep 1
  # echo 0 > /debug/tracing/tracing_enabled
  # cat /debug/tracing/trace
-# tracer: ftrace
+# tracer: function
 #
 #           TASK-PID   CPU#    TIMESTAMP  FUNCTION
 #              | |      |          |         |
@@ -1040,10 +1032,10 @@ this tracer is a nop.
 [...]
 
 
-Note: ftrace uses ring buffers to store the above entries. The newest data
-may overwrite the oldest data. Sometimes using echo to stop the trace
-is not sufficient because the tracing could have overwritten the data
-that you wanted to record. For this reason, it is sometimes better to
+Note: function tracer uses ring buffers to store the above entries.
+The newest data may overwrite the oldest data. Sometimes using echo to
+stop the trace is not sufficient because the tracing could have overwritten
+the data that you wanted to record. For this reason, it is sometimes better to
 disable tracing directly from a program. This allows you to stop the
 tracing at the point that you hit the part that you are interested in.
 To disable the tracing directly from a C program, something like following
@@ -1077,18 +1069,31 @@ every kernel function, produced by the -pg switch in gcc), starts
 of pointing to a simple return. (Enabling FTRACE will include the
 -pg switch in the compiling of the kernel.)
 
-When dynamic ftrace is initialized, it calls kstop_machine to make
-the machine act like a uniprocessor so that it can freely modify code
-without worrying about other processors executing that same code.  At
-initialization, the mcount calls are changed to call a "record_ip"
-function.  After this, the first time a kernel function is called,
-it has the calling address saved in a hash table.
-
-Later on the ftraced kernel thread is awoken and will again call
-kstop_machine if new functions have been recorded. The ftraced thread
-will change all calls to mcount to "nop".  Just calling mcount
-and having mcount return has shown a 10% overhead. By converting
-it to a nop, there is no measurable overhead to the system.
+At compile time every C file object is run through the
+recordmcount.pl script (located in the scripts directory). This
+script will process the C object using objdump to find all the
+locations in the .text section that call mcount. (Note, only
+the .text section is processed, since processing other sections
+like .init.text may cause races due to those sections being freed).
+
+A new section called "__mcount_loc" is created that holds references
+to all the mcount call sites in the .text section. This section is
+compiled back into the original object. The final linker will add
+all these references into a single table.
+
+On boot up, before SMP is initialized, the dynamic ftrace code
+scans this table and updates all the locations into nops. It also
+records the locations, which are added to the available_filter_functions
+list.  Modules are processed as they are loaded and before they are
+executed.  When a module is unloaded, it also removes its functions from
+the ftrace function list. This is automatic in the module unload
+code, and the module author does not need to worry about it.
+
+When tracing is enabled, kstop_machine is called to prevent races
+with the CPUS executing code being modified (which can cause the
+CPU to do undesireable things), and the nops are patched back
+to calls. But this time, they do not call mcount (which is just
+a function stub). They now call into the ftrace infrastructure.
 
 One special side-effect to the recording of the functions being
 traced is that we can now selectively choose which functions we
@@ -1251,36 +1256,6 @@ Produces:
 
 We can see that there's no more lock or preempt tracing.
 
-ftraced
--------
-
-As mentioned above, when dynamic ftrace is configured in, a kernel
-thread wakes up once a second and checks to see if there are mcount
-calls that need to be converted into nops. If there are not any, then
-it simply goes back to sleep. But if there are some, it will call
-kstop_machine to convert the calls to nops.
-
-There may be a case in which you do not want this added latency.
-Perhaps you are doing some audio recording and this activity might
-cause skips in the playback. There is an interface to disable
-and enable the "ftraced" kernel thread.
-
- # echo 0 > /debug/tracing/ftraced_enabled
-
-This will disable the calling of kstop_machine to update the
-mcount calls to nops. Remember that there is a large overhead
-to calling mcount. Without this kernel thread, that overhead will
-exist.
-
-If there are recorded calls to mcount, any write to the ftraced_enabled
-file will cause the kstop_machine to run. This means that a
-user can manually perform the updates when they want to by simply
-echoing a '0' into the ftraced_enabled file.
-
-The updates are also done at the beginning of enabling a tracer
-that uses ftrace function recording.
-
-
 trace_pipe
 ----------
 
@@ -1289,14 +1264,14 @@ on the tracing is different. Every read from trace_pipe is consumed.
 This means that subsequent reads will be different. The trace
 is live.
 
- # echo ftrace > /debug/tracing/current_tracer
+ # echo function > /debug/tracing/current_tracer
  # cat /debug/tracing/trace_pipe > /tmp/trace.out &
 [1] 4153
  # echo 1 > /debug/tracing/tracing_enabled
  # usleep 1
  # echo 0 > /debug/tracing/tracing_enabled
  # cat /debug/tracing/trace
-# tracer: ftrace
+# tracer: function
 #
 #           TASK-PID   CPU#    TIMESTAMP  FUNCTION
 #              | |      |          |         |
@@ -1317,7 +1292,7 @@ is live.
 
 Note, reading the trace_pipe file will block until more input is added.
 By changing the tracer, trace_pipe will issue an EOF. We needed
-to set the ftrace tracer _before_ cating the trace_pipe file.
+to set the function tracer _before_ we "cat" the trace_pipe file.
 
 
 trace entries
@@ -1334,10 +1309,10 @@ number of entries.
 65620
 
 Note, to modify this, you must have tracing completely disabled. To do that,
-echo "none" into the current_tracer. If the current_tracer is not set
-to "none", an EINVAL error will be returned.
+echo "nop" into the current_tracer. If the current_tracer is not set
+to "nop", an EINVAL error will be returned.
 
- # echo none > /debug/tracing/current_tracer
+ # echo nop > /debug/tracing/current_tracer
  # echo 100000 > /debug/tracing/trace_entries
  # cat /debug/tracing/trace_entries
 100045

Documentation/hwmon/adt7462

@@ -0,0 +1,67 @@
+Kernel driver adt7462
+======================
+
+Supported chips:
+  * Analog Devices ADT7462
+    Prefix: 'adt7462'
+    Addresses scanned: I2C 0x58, 0x5C
+    Datasheet: Publicly available at the Analog Devices website
+
+Author: Darrick J. Wong
+
+Description
+-----------
+
+This driver implements support for the Analog Devices ADT7462 chip family.
+
+This chip is a bit of a beast.  It has 8 counters for measuring fan speed.  It
+can also measure 13 voltages or 4 temperatures, or various combinations of the
+two.  See the chip documentation for more details about the exact set of
+configurations.  This driver does not allow one to configure the chip; that is
+left to the system designer.
+
+A sophisticated control system for the PWM outputs is designed into the ADT7462
+that allows fan speed to be adjusted automatically based on any of the three
+temperature sensors. Each PWM output is individually adjustable and
+programmable. Once configured, the ADT7462 will adjust the PWM outputs in
+response to the measured temperatures without further host intervention.  This
+feature can also be disabled for manual control of the PWM's.
+
+Each of the measured inputs (voltage, temperature, fan speed) has
+corresponding high/low limit values. The ADT7462 will signal an ALARM if
+any measured value exceeds either limit.
+
+The ADT7462 samples all inputs continuously. The driver will not read
+the registers more often than once every other second. Further,
+configuration data is only read once per minute.
+
+Special Features
+----------------
+
+The ADT7462 have a 10-bit ADC and can therefore measure temperatures
+with 0.25 degC resolution.
+
+The Analog Devices datasheet is very detailed and describes a procedure for
+determining an optimal configuration for the automatic PWM control.
+
+The driver will report sensor labels when it is able to determine that
+information from the configuration registers.
+
+Configuration Notes
+-------------------
+
+Besides standard interfaces driver adds the following:
+
+* PWM Control
+
+* pwm#_auto_point1_pwm and temp#_auto_point1_temp and
+* pwm#_auto_point2_pwm and temp#_auto_point2_temp -
+
+point1: Set the pwm speed at a lower temperature bound.
+point2: Set the pwm speed at a higher temperature bound.
+
+The ADT7462 will scale the pwm between the lower and higher pwm speed when
+the temperature is between the two temperature boundaries.  PWM values range
+from 0 (off) to 255 (full speed).  Fan speed will be set to maximum when the
+temperature sensor associated with the PWM control exceeds temp#_max.
+

Documentation/hwmon/lis3lv02d

@@ -0,0 +1,49 @@
+Kernel driver lis3lv02d
+==================
+
+Supported chips:
+
+  * STMicroelectronics LIS3LV02DL and LIS3LV02DQ
+
+Author:
+        Yan Burman <burman.yan@gmail.com>
+	Eric Piel <eric.piel@tremplin-utc.net>
+
+
+Description
+-----------
+
+This driver provides support for the accelerometer found in various HP laptops
+sporting the feature officially called "HP Mobile Data Protection System 3D" or
+"HP 3D DriveGuard". It detect automatically laptops with this sensor. Known models
+(for now the HP 2133, nc6420, nc2510, nc8510, nc84x0, nw9440 and nx9420) will
+have their axis automatically oriented on standard way (eg: you can directly
+play neverball).  The accelerometer data is readable via
+/sys/devices/platform/lis3lv02d.
+
+Sysfs attributes under /sys/devices/platform/lis3lv02d/:
+position - 3D position that the accelerometer reports. Format: "(x,y,z)"
+calibrate - read: values (x, y, z) that are used as the base for input class device operation.
+            write: forces the base to be recalibrated with the current position.
+rate - reports the sampling rate of the accelerometer device in HZ
+
+This driver also provides an absolute input class device, allowing
+the laptop to act as a pinball machine-esque joystick.
+
+Axes orientation
+----------------
+
+For better compatibility between the various laptops. The values reported by
+the accelerometer are converted into a "standard" organisation of the axes
+(aka "can play neverball out of the box"):
+ * When the laptop is horizontal the position reported is about 0 for X and Y
+and a positive value for Z
+ * If the left side is elevated, X increases (becomes positive)
+ * If the front side (where the touchpad is) is elevated, Y decreases (becomes negative)
+ * If the laptop is put upside-down, Z becomes negative
+
+If your laptop model is not recognized (cf "dmesg"), you can send an email to the
+authors to add it to the database.  When reporting a new laptop, please include
+the output of "dmidecode" plus the value of /sys/devices/platform/lis3lv02d/position
+in these four cases.
+

Documentation/ics932s401

@@ -0,0 +1,31 @@
+Kernel driver ics932s401
+======================
+
+Supported chips:
+  * IDT ICS932S401
+    Prefix: 'ics932s401'
+    Addresses scanned: I2C 0x69
+    Datasheet: Publically available at the IDT website
+
+Author: Darrick J. Wong
+
+Description
+-----------
+
+This driver implements support for the IDT ICS932S401 chip family.
+
+This chip has 4 clock outputs--a base clock for the CPU (which is likely
+multiplied to get the real CPU clock), a system clock, a PCI clock, a USB
+clock, and a reference clock.  The driver reports selected and actual
+frequency.  If spread spectrum mode is enabled, the driver also reports by what
+percent the clock signal is being spread, which should be between 0 and -0.5%.
+All frequencies are reported in KHz.
+
+The ICS932S401 monitors all inputs continuously. The driver will not read
+the registers more often than once every other second.
+
+Special Features
+----------------
+
+The clocks could be reprogrammed to increase system speed.  I will not help you
+do this, as you risk damaging your system!

Documentation/input/input-programming.txt

@@ -20,10 +20,11 @@ pressed or released a BUTTON_IRQ happens. The driver could look like:
 
 static struct input_dev *button_dev;
 
-static void button_interrupt(int irq, void *dummy, struct pt_regs *fp)
+static irqreturn_t button_interrupt(int irq, void *dummy)
 {
 	input_report_key(button_dev, BTN_0, inb(BUTTON_PORT) & 1);
 	input_sync(button_dev);
+	return IRQ_HANDLED;
 }
 
 static int __init button_init(void)

Documentation/io-mapping.txt

@@ -0,0 +1,82 @@
+The io_mapping functions in linux/io-mapping.h provide an abstraction for
+efficiently mapping small regions of an I/O device to the CPU. The initial
+usage is to support the large graphics aperture on 32-bit processors where
+ioremap_wc cannot be used to statically map the entire aperture to the CPU
+as it would consume too much of the kernel address space.
+
+A mapping object is created during driver initialization using
+
+	struct io_mapping *io_mapping_create_wc(unsigned long base,
+						unsigned long size)
+
+		'base' is the bus address of the region to be made
+		mappable, while 'size' indicates how large a mapping region to
+		enable. Both are in bytes.
+
+		This _wc variant provides a mapping which may only be used
+		with the io_mapping_map_atomic_wc or io_mapping_map_wc.
+
+With this mapping object, individual pages can be mapped either atomically
+or not, depending on the necessary scheduling environment. Of course, atomic
+maps are more efficient:
+
+	void *io_mapping_map_atomic_wc(struct io_mapping *mapping,
+				       unsigned long offset)
+
+		'offset' is the offset within the defined mapping region.
+		Accessing addresses beyond the region specified in the
+		creation function yields undefined results. Using an offset
+		which is not page aligned yields an undefined result. The
+		return value points to a single page in CPU address space.
+
+		This _wc variant returns a write-combining map to the
+		page and may only be used with mappings created by
+		io_mapping_create_wc
+
+		Note that the task may not sleep while holding this page
+		mapped.
+
+	void io_mapping_unmap_atomic(void *vaddr)
+
+		'vaddr' must be the the value returned by the last
+		io_mapping_map_atomic_wc call. This unmaps the specified
+		page and allows the task to sleep once again.
+
+If you need to sleep while holding the lock, you can use the non-atomic
+variant, although they may be significantly slower.
+
+	void *io_mapping_map_wc(struct io_mapping *mapping,
+				unsigned long offset)
+
+		This works like io_mapping_map_atomic_wc except it allows
+		the task to sleep while holding the page mapped.
+
+	void io_mapping_unmap(void *vaddr)
+
+		This works like io_mapping_unmap_atomic, except it is used
+		for pages mapped with io_mapping_map_wc.
+
+At driver close time, the io_mapping object must be freed:
+
+	void io_mapping_free(struct io_mapping *mapping)
+
+Current Implementation:
+
+The initial implementation of these functions uses existing mapping
+mechanisms and so provides only an abstraction layer and no new
+functionality.
+
+On 64-bit processors, io_mapping_create_wc calls ioremap_wc for the whole
+range, creating a permanent kernel-visible mapping to the resource. The
+map_atomic and map functions add the requested offset to the base of the
+virtual address returned by ioremap_wc.
+
+On 32-bit processors with HIGHMEM defined, io_mapping_map_atomic_wc uses
+kmap_atomic_pfn to map the specified page in an atomic fashion;
+kmap_atomic_pfn isn't really supposed to be used with device pages, but it
+provides an efficient mapping for this usage.
+
+On 32-bit processors without HIGHMEM defined, io_mapping_map_atomic_wc and
+io_mapping_map_wc both use ioremap_wc, a terribly inefficient function which
+performs an IPI to inform all processors about the new mapping. This results
+in a significant performance penalty.

Documentation/ioctl/00-INDEX

@@ -0,0 +1,10 @@
+00-INDEX
+	- this file
+cdrom.txt
+	- summary of CDROM ioctl calls
+hdio.txt
+	- summary of HDIO_ ioctl calls
+ioctl-decoding.txt
+	- how to decode the bits of an IOCTL code
+ioctl-number.txt
+	- how to implement and register device/driver ioctl calls

Documentation/kernel-parameters.txt

@@ -198,59 +198,42 @@ and is between 256 and 4096 characters. It is defined in the file
 			that require a timer override, but don't have
 			HPET
 
-	acpi.debug_layer=	[HW,ACPI]
+	acpi_backlight=	[HW,ACPI]
+			acpi_backlight=vendor
+			acpi_backlight=video
+			If set to vendor, prefer vendor specific driver
+			(e.g. thinkpad_acpi, sony_acpi, etc.) instead
+			of the ACPI video.ko driver.
+
+	acpi_display_output=	[HW,ACPI]
+			acpi_display_output=vendor
+			acpi_display_output=video
+			See above.
+
+	acpi.debug_layer=	[HW,ACPI,ACPI_DEBUG]
+	acpi.debug_level=	[HW,ACPI,ACPI_DEBUG]
 			Format: <int>
-			Each bit of the <int> indicates an ACPI debug layer,
-			1: enable, 0: disable. It is useful for boot time
-			debugging. After system has booted up, it can be set
-			via /sys/module/acpi/parameters/debug_layer.
-			CONFIG_ACPI_DEBUG must be enabled for this to produce any output.
-			Available bits (add the numbers together) to enable debug output
-			for specific parts of the ACPI subsystem:
-			0x01 utilities 0x02 hardware 0x04 events 0x08 tables
-			0x10 namespace 0x20 parser 0x40 dispatcher
-			0x80 executer 0x100 resources 0x200 acpica debugger
-			0x400 os services 0x800 acpica disassembler.
-			The number can be in decimal or prefixed with 0x in hex.
-			Warning: Many of these options can produce a lot of
-			output and make your system unusable. Be very careful.
-
-	acpi.debug_level=	[HW,ACPI]
-			Format: <int>
-			Each bit of the <int> indicates an ACPI debug level,
-			which corresponds to the level in an ACPI_DEBUG_PRINT
-			statement.  After system has booted up, this mask
-			can be set via /sys/module/acpi/parameters/debug_level.
-
-			CONFIG_ACPI_DEBUG must be enabled for this to produce
-			any output.  The number can be in decimal or prefixed
-			with 0x in hex.  Some of these options produce so much
-			output that the system is unusable.
-
-			The following global components are defined by the
-			ACPI CA:
-			       0x01 error
-			       0x02 warn
-			       0x04 init
-			       0x08 debug object
-			       0x10 info
-			       0x20 init names
-			       0x40 parse
-			       0x80 load
-			      0x100 dispatch
-			      0x200 execute
-			      0x400 names
-			      0x800 operation region
-			     0x1000 bfield
-			     0x2000 tables
-			     0x4000 values
-			     0x8000 objects
-			    0x10000 resources
-			    0x20000 user requests
-			    0x40000 package
- 			The number can be in decimal or prefixed with 0x in hex.
- 			Warning: Many of these options can produce a lot of
- 			output and make your system unusable. Be very careful.
+			CONFIG_ACPI_DEBUG must be enabled to produce any ACPI
+			debug output.  Bits in debug_layer correspond to a
+			_COMPONENT in an ACPI source file, e.g.,
+			    #define _COMPONENT ACPI_PCI_COMPONENT
+			Bits in debug_level correspond to a level in
+			ACPI_DEBUG_PRINT statements, e.g.,
+			    ACPI_DEBUG_PRINT((ACPI_DB_INFO, ...
+			See Documentation/acpi/debug.txt for more information
+			about debug layers and levels.
+
+			Enable AML "Debug" output, i.e., stores to the Debug
+			object while interpreting AML:
+			    acpi.debug_layer=0xffffffff acpi.debug_level=0x2
+			Enable PCI/PCI interrupt routing info messages:
+			    acpi.debug_layer=0x400000 acpi.debug_level=0x4
+			Enable all messages related to ACPI hardware:
+			    acpi.debug_layer=0x2 acpi.debug_level=0xffffffff
+
+			Some values produce so much output that the system is
+			unusable.  The "log_buf_len" parameter may be useful
+			if you need to capture more output.
 
  	acpi.power_nocheck=	[HW,ACPI]
  			Format: 1/0 enable/disable the check of power state.
@@ -311,7 +294,9 @@ and is between 256 and 4096 characters. It is defined in the file
 			Possible values are:
 			isolate - enable device isolation (each device, as far
 			          as possible, will get its own protection
-			          domain)
+			          domain) [default]
+			share - put every device behind one IOMMU into the
+				same protection domain
 			fullflush - enable flushing of IO/TLB entries when
 				    they are unmapped. Otherwise they are
 				    flushed before they will be reused, which
@@ -646,7 +631,7 @@ and is between 256 and 4096 characters. It is defined in the file
 
 	digiepca=	[HW,SERIAL]
 			See drivers/char/README.epca and
-			Documentation/digiepca.txt.
+			Documentation/serial/digiepca.txt.
 
 	disable_mtrr_cleanup [X86]
 	enable_mtrr_cleanup [X86]
@@ -757,7 +742,7 @@ and is between 256 and 4096 characters. It is defined in the file
 			See header of drivers/scsi/fdomain.c.
 
 	floppy=		[HW]
-			See Documentation/floppy.txt.
+			See Documentation/blockdev/floppy.txt.
 
 	force_pal_cache_flush
 			[IA-64] Avoid check_sal_cache_flush which may hang on
@@ -995,13 +980,15 @@ and is between 256 and 4096 characters. It is defined in the file
 			Format:
 			<cpu number>,...,<cpu number>
 			or
-			<cpu number>-<cpu number>  (must be a positive range in ascending order)
+			<cpu number>-<cpu number>
+			(must be a positive range in ascending order)
 			or a mixture
 			<cpu number>,...,<cpu number>-<cpu number>
+
 			This option can be used to specify one or more CPUs
 			to isolate from the general SMP balancing and scheduling
-			algorithms. The only way to move a process onto or off
-			an "isolated" CPU is via the CPU affinity syscalls.
+			algorithms. You can move a process onto or off an
+			"isolated" CPU via the CPU affinity syscalls or cpuset.
 			<cpu number> begins at 0 and the maximum value is
 			"number of CPUs in system - 1".
 
@@ -1116,7 +1103,7 @@ and is between 256 and 4096 characters. It is defined in the file
 			the same attribute, the last one is used.
 
 	load_ramdisk=	[RAM] List of ramdisks to load from floppy
-			See Documentation/ramdisk.txt.
+			See Documentation/blockdev/ramdisk.txt.
 
 	lockd.nlm_grace_period=P  [NFS] Assign grace period.
 			Format: <integer>
@@ -1208,8 +1195,8 @@ and is between 256 and 4096 characters. It is defined in the file
 			it is equivalent to "nosmp", which also disables
 			the IO APIC.
 
-	max_addr=[KMG]	[KNL,BOOT,ia64] All physical memory greater than or
-			equal to this physical address is ignored.
+	max_addr=nn[KMG]	[KNL,BOOT,ia64] All physical memory greater than
+			or equal to this physical address is ignored.
 
 	max_luns=	[SCSI] Maximum number of LUNs to probe.
 			Should be between 1 and 2^32-1.
@@ -1309,6 +1296,9 @@ and is between 256 and 4096 characters. It is defined in the file
 
 	mga=		[HW,DRM]
 
+	min_addr=nn[KMG]	[KNL,BOOT,ia64] All physical memory below this
+			physical address is ignored.
+
 	mminit_loglevel=
 			[KNL] When CONFIG_DEBUG_MEMORY_INIT is set, this
 			parameter allows control of the logging verbosity for
@@ -1470,8 +1460,6 @@ and is between 256 and 4096 characters. It is defined in the file
 			Valid arguments: on, off
 			Default: on
 
-	noirqbalance	[X86-32,SMP,KNL] Disable kernel irq balancing
-
 	noirqdebug	[X86-32] Disables the code which attempts to detect and
 			disable unhandled interrupt sources.
 
@@ -1613,7 +1601,7 @@ and is between 256 and 4096 characters. It is defined in the file
 
 	pcd.		[PARIDE]
 			See header of drivers/block/paride/pcd.c.
-			See also Documentation/paride.txt.
+			See also Documentation/blockdev/paride.txt.
 
 	pci=option[,option...]	[PCI] various PCI subsystem options:
 		off		[X86] don't probe for the PCI bus
@@ -1714,7 +1702,7 @@ and is between 256 and 4096 characters. It is defined in the file
 	pcmv=		[HW,PCMCIA] BadgePAD 4
 
 	pd.		[PARIDE]
-			See Documentation/paride.txt.
+			See Documentation/blockdev/paride.txt.
 
 	pdcchassis=	[PARISC,HW] Disable/Enable PDC Chassis Status codes at
 			boot time.
@@ -1722,10 +1710,10 @@ and is between 256 and 4096 characters. It is defined in the file
 			See arch/parisc/kernel/pdc_chassis.c
 
 	pf.		[PARIDE]
-			See Documentation/paride.txt.
+			See Documentation/blockdev/paride.txt.
 
 	pg.		[PARIDE]
-			See Documentation/paride.txt.
+			See Documentation/blockdev/paride.txt.
 
 	pirq=		[SMP,APIC] Manual mp-table setup
 			See Documentation/x86/i386/IO-APIC.txt.
@@ -1795,7 +1783,7 @@ and is between 256 and 4096 characters. It is defined in the file
 
 	prompt_ramdisk=	[RAM] List of RAM disks to prompt for floppy disk
 			before loading.
-			See Documentation/ramdisk.txt.
+			See Documentation/blockdev/ramdisk.txt.
 
 	psmouse.proto=	[HW,MOUSE] Highest PS2 mouse protocol extension to
 			probe for; one of (bare|imps|exps|lifebook|any).
@@ -1815,7 +1803,7 @@ and is between 256 and 4096 characters. It is defined in the file
 			<io>,<mss_io>,<mss_irq>,<mss_dma>,<mpu_io>,<mpu_irq>
 
 	pt.		[PARIDE]
-			See Documentation/paride.txt.
+			See Documentation/blockdev/paride.txt.
 
 	pty.legacy_count=
 			[KNL] Number of legacy pty's. Overwrites compiled-in
@@ -1829,10 +1817,10 @@ and is between 256 and 4096 characters. It is defined in the file
 			See Documentation/md.txt.
 
 	ramdisk_blocksize=	[RAM]
-			See Documentation/ramdisk.txt.
+			See Documentation/blockdev/ramdisk.txt.
 
 	ramdisk_size=	[RAM] Sizes of RAM disks in kilobytes
-			See Documentation/ramdisk.txt.
+			See Documentation/blockdev/ramdisk.txt.
 
 	rcupdate.blimit=	[KNL,BOOT]
 			Set maximum number of finished RCU callbacks to process
@@ -2164,7 +2152,7 @@ and is between 256 and 4096 characters. It is defined in the file
 			See Documentation/sonypi.txt
 
 	specialix=	[HW,SERIAL] Specialix multi-serial port adapter
-			See Documentation/specialix.txt.
+			See Documentation/serial/specialix.txt.
 
 	spia_io_base=	[HW,MTD]
 	spia_fio_base=

Documentation/local_ops.txt

@@ -149,7 +149,7 @@ static void do_test_timer(unsigned long data)
 	int cpu;
 
 	/* Increment the counters */
-	on_each_cpu(test_each, NULL, 0, 1);
+	on_each_cpu(test_each, NULL, 1);
 	/* Read all the counters */
 	printk("Counters read from CPU %d\n", smp_processor_id());
 	for_each_online_cpu(cpu) {

Documentation/networking/phy.txt

@@ -96,7 +96,7 @@ Letting the PHY Abstraction Layer do Everything
    static void adjust_link(struct net_device *dev);
  
  Next, you need to know the device name of the PHY connected to this device. 
- The name will look something like, "phy0:0", where the first number is the
+ The name will look something like, "0:00", where the first number is the
  bus id, and the second is the PHY's address on that bus.  Typically,
  the bus is responsible for making its ID unique.
  

Documentation/powerpc/booting-without-of.txt

@@ -41,25 +41,14 @@ Table of Contents
   VI - System-on-a-chip devices and nodes
     1) Defining child nodes of an SOC
     2) Representing devices without a current OF specification
-      a) MDIO IO device
-      b) Gianfar-compatible ethernet nodes
-      c) PHY nodes
-      d) Interrupt controllers
-      e) I2C
-      f) Freescale SOC USB controllers
-      g) Freescale SOC SEC Security Engines
-      h) Board Control and Status (BCSR)
-      i) Freescale QUICC Engine module (QE)
-      j) CFI or JEDEC memory-mapped NOR flash
-      k) Global Utilities Block
-      l) Freescale Communications Processor Module
-      m) Chipselect/Local Bus
-      n) 4xx/Axon EMAC ethernet nodes
-      o) Xilinx IP cores
-      p) Freescale Synchronous Serial Interface
-	  q) USB EHCI controllers
-      r) MDIO on GPIOs
-      s) SPI busses
+      a) PHY nodes
+      b) Interrupt controllers
+      c) CFI or JEDEC memory-mapped NOR flash
+      d) 4xx/Axon EMAC ethernet nodes
+      e) Xilinx IP cores
+      f) USB EHCI controllers
+      g) MDIO on GPIOs
+      h) SPI busses
 
   VII - Marvell Discovery mv64[345]6x System Controller chips
     1) The /system-controller node
@@ -1830,41 +1819,7 @@ platforms are moved over to use the flattened-device-tree model.
 		   big-endian;
 	   };
 
-    r) Freescale Display Interface Unit
-
-    The Freescale DIU is a LCD controller, with proper hardware, it can also
-    drive DVI monitors.
-
-    Required properties:
-    - compatible : should be "fsl-diu".
-    - reg : should contain at least address and length of the DIU register
-      set.
-    - Interrupts : one DIU interrupt should be describe here.
-
-    Example (MPC8610HPCD)
-	display@2c000 {
-		compatible = "fsl,diu";
-		reg = <0x2c000 100>;
-		interrupts = <72 2>;
-		interrupt-parent = <&mpic>;
-	};
-
-    s) Freescale on board FPGA
-
-    This is the memory-mapped registers for on board FPGA.
-
-    Required properities:
-    - compatible : should be "fsl,fpga-pixis".
-    - reg : should contain the address and the lenght of the FPPGA register
-      set.
-
-    Example (MPC8610HPCD)
-	board-control@e8000000 {
-		compatible = "fsl,fpga-pixis";
-		reg = <0xe8000000 32>;
-	};
-
-   r) MDIO on GPIOs
+   g) MDIO on GPIOs
 
    Currently defined compatibles:
    - virtual,gpio-mdio
@@ -1884,7 +1839,7 @@ platforms are moved over to use the flattened-device-tree model.
 			 &qe_pio_c 6>;
 	};
 
-    s) SPI (Serial Peripheral Interface) busses
+    h) SPI (Serial Peripheral Interface) busses
 
     SPI busses can be described with a node for the SPI master device
     and a set of child nodes for each SPI slave on the bus.  For this

Documentation/printk-formats.txt

@@ -0,0 +1,35 @@
+If variable is of Type,		use printk format specifier:
+---------------------------------------------------------
+		int			%d or %x
+		unsigned int		%u or %x
+		long			%ld or %lx
+		unsigned long		%lu or %lx
+		long long		%lld or %llx
+		unsigned long long	%llu or %llx
+		size_t			%zu or %zx
+		ssize_t			%zd or %zx
+
+Raw pointer value SHOULD be printed with %p.
+
+u64 SHOULD be printed with %llu/%llx, (unsigned long long):
+
+	printk("%llu", (unsigned long long)u64_var);
+
+s64 SHOULD be printed with %lld/%llx, (long long):
+
+	printk("%lld", (long long)s64_var);
+
+If <type> is dependent on a config option for its size (e.g., sector_t,
+blkcnt_t, phys_addr_t, resource_size_t) or is architecture-dependent
+for its size (e.g., tcflag_t), use a format specifier of its largest
+possible type and explicitly cast to it.  Example:
+
+	printk("test: sector number/total blocks: %llu/%llu\n",
+		(unsigned long long)sector, (unsigned long long)blockcount);
+
+Reminder: sizeof() result is of type size_t.
+
+Thank you for your cooperation and attention.
+
+
+By Randy Dunlap <rdunlap@xenotime.net>

Documentation/serial/00-INDEX

@@ -0,0 +1,24 @@
+00-INDEX
+	- this file.
+README.cycladesZ
+	- info on Cyclades-Z firmware loading.
+computone.txt
+	- info on Computone Intelliport II/Plus Multiport Serial Driver.
+digiepca.txt
+	- info on Digi Intl. {PC,PCI,EISA}Xx and Xem series cards.
+hayes-esp.txt
+	- info on using the Hayes ESP serial driver.
+moxa-smartio
+	- file with info on installing/using Moxa multiport serial driver.
+riscom8.txt
+	- notes on using the RISCom/8 multi-port serial driver.
+rocket.txt
+	- info on the Comtrol RocketPort multiport serial driver.
+specialix.txt
+	- info on hardware/driver for specialix IO8+ multiport serial card.
+stallion.txt
+	- info on using the Stallion multiport serial driver.
+sx.txt
+	- info on the Specialix SX/SI multiport serial driver.
+tty.txt
+	- guide to the locking policies of the tty layer.

Documentation/computone.txt → Documentation/serial/computone.txt

@@ -247,7 +247,7 @@ shar archive to make it easier to extract the script from the documentation.
 To create the ip2mkdev shell script change to a convenient directory (/tmp
 works just fine) and run the following command:
 
-	unshar Documentation/computone.txt
+	unshar Documentation/serial/computone.txt
 		(This file)
 
 You should now have a file ip2mkdev in your current working directory with

Documentation/sound/alsa/ALSA-Configuration.txt

@@ -1072,10 +1072,13 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 	  ref		Reference board
 	  dell-m4-1	Dell desktops
 	  dell-m4-2	Dell desktops
+	  dell-m4-3	Dell desktops
 
 	STAC92HD73*
 	  ref		Reference board
-	  dell-m6	Dell desktops
+	  dell-m6-amic	Dell desktops/laptops with analog mics
+	  dell-m6-dmic	Dell desktops/laptops with digital mics
+	  dell-m6	Dell desktops/laptops with both type of mics
 
 	STAC9872
 	  vaio		Setup for VAIO FE550G/SZ110

Documentation/spi/spi-summary

@@ -215,7 +215,7 @@ So for example arch/.../mach-*/board-*.c files might have code like:
 	/* if your mach-* infrastructure doesn't support kernels that can
 	 * run on multiple boards, pdata wouldn't benefit from "__init".
 	 */
-	static struct mysoc_spi_data __init pdata = { ... };
+	static struct mysoc_spi_data __initdata pdata = { ... };
 
 	static __init board_init(void)
 	{

Documentation/tracers/mmiotrace.txt

@@ -37,7 +37,7 @@ $ echo mmiotrace > /debug/tracing/current_tracer
 $ cat /debug/tracing/trace_pipe > mydump.txt &
 Start X or whatever.
 $ echo "X is up" > /debug/tracing/trace_marker
-$ echo none > /debug/tracing/current_tracer
+$ echo nop > /debug/tracing/current_tracer
 Check for lost events.
 
 
@@ -66,7 +66,7 @@ which action. It is recommended to place descriptive markers about what you
 do.
 
 Shut down mmiotrace (requires root privileges):
-$ echo none > /debug/tracing/current_tracer
+$ echo nop > /debug/tracing/current_tracer
 The 'cat' process exits. If it does not, kill it by issuing 'fg' command and
 pressing ctrl+c.
 
@@ -81,7 +81,9 @@ are:
 $ cat /debug/tracing/trace_entries
 gives you a number. Approximately double this number and write it back, for
 instance:
+$ echo 0 > /debug/tracing/tracing_enabled
 $ echo 128000 > /debug/tracing/trace_entries
+$ echo 1 > /debug/tracing/tracing_enabled
 Then start again from the top.
 
 If you are doing a trace for a driver project, e.g. Nouveau, you should also

Documentation/usb/gadget_serial.txt

@@ -114,11 +114,11 @@ modules.
 Then you must load the gadget serial driver.  To load it as an
 ACM device (recommended for interoperability), do this:
 
-  modprobe g_serial use_acm=1
+  modprobe g_serial
 
 To load it as a vendor specific bulk in/out device, do this:
 
-  modprobe g_serial
+  modprobe g_serial use_acm=0
 
 This will also automatically load the underlying gadget peripheral
 controller driver.  This must be done each time you reboot the gadget

Documentation/usb/proc_usb_info.txt

@@ -49,8 +49,10 @@ it and 002/048 sometime later.
 
 These files can be read as binary data.  The binary data consists
 of first the device descriptor, then the descriptors for each
-configuration of the device.  That information is also shown in
-text form by the /proc/bus/usb/devices file, described later.
+configuration of the device.  Multi-byte fields in the device and
+configuration descriptors, but not other descriptors, are converted
+to host endianness by the kernel.  This information is also shown
+in text form by the /proc/bus/usb/devices file, described later.
 
 These files may also be used to write user-level drivers for the USB
 devices.  You would open the /proc/bus/usb/BBB/DDD file read/write,

Documentation/usb/usbmon.txt

@@ -34,11 +34,12 @@ if usbmon is built into the kernel.
 Verify that bus sockets are present.
 
 # ls /sys/kernel/debug/usbmon
-0s  0t  0u  1s  1t  1u  2s  2t  2u  3s  3t  3u  4s  4t  4u
+0s  0u  1s  1t  1u  2s  2t  2u  3s  3t  3u  4s  4t  4u
 #
 
-Now you can choose to either use the sockets numbered '0' (to capture packets on
-all buses), and skip to step #3, or find the bus used by your device with step #2.
+Now you can choose to either use the socket '0u' (to capture packets on all
+buses), and skip to step #3, or find the bus used by your device with step #2.
+This allows to filter away annoying devices that talk continuously.
 
 2. Find which bus connects to the desired device
 
@@ -99,8 +100,9 @@ on the event type, but there is a set of words, common for all types.
 
 Here is the list of words, from left to right:
 
-- URB Tag. This is used to identify URBs is normally a kernel mode address
- of the URB structure in hexadecimal.
+- URB Tag. This is used to identify URBs, and is normally an in-kernel address
+  of the URB structure in hexadecimal, but can be a sequence number or any
+  other unique string, within reason.
 
 - Timestamp in microseconds, a decimal number. The timestamp's resolution
   depends on available clock, and so it can be much worse than a microsecond

Documentation/video4linux/README.cx88

@@ -27,8 +27,8 @@ audio
 	  sound card) should be possible, but there is no code yet ...
 
 vbi
-	- some code present.  Doesn't crash any more, but also doesn't
-	  work yet ...
+	- Code present. Works for NTSC closed caption. PAL and other
+	  TV norms may or may not work.
 
 
 how to add support for new cards

Documentation/video4linux/si470x.txt

@@ -0,0 +1,118 @@
+Driver for USB radios for the Silicon Labs Si470x FM Radio Receivers
+
+Copyright (c) 2008 Tobias Lorenz <tobias.lorenz@gmx.net>
+
+
+Information from Silicon Labs
+=============================
+Silicon Laboratories is the manufacturer of the radio ICs, that nowadays are the
+most often used radio receivers in cell phones. Usually they are connected with
+I2C. But SiLabs also provides a reference design, which integrates this IC,
+together with a small microcontroller C8051F321, to form a USB radio.
+Part of this reference design is also a radio application in binary and source
+code. The software also contains an automatic firmware upgrade to the most
+current version. Information on these can be downloaded here:
+http://www.silabs.com/usbradio
+
+
+Supported ICs
+=============
+The following ICs have a very similar register set, so that they are or will be
+supported somewhen by the driver:
+- Si4700: FM radio receiver
+- Si4701: FM radio receiver, RDS Support
+- Si4702: FM radio receiver
+- Si4703: FM radio receiver, RDS Support
+- Si4704: FM radio receiver, no external antenna required
+- Si4705: FM radio receiver, no external antenna required, RDS support, Dig I/O
+- Si4706: Enhanced FM RDS/TMC radio receiver, no external antenna required, RDS
+	  Support
+- Si4707: Dedicated weather band radio receiver with SAME decoder, RDS Support
+- Si4708: Smallest FM receivers
+- Si4709: Smallest FM receivers, RDS Support
+More information on these can be downloaded here:
+http://www.silabs.com/products/mcu/Pages/USBFMRadioRD.aspx
+
+
+Supported USB devices
+=====================
+Currently the following USB radios (vendor:product) with the Silicon Labs si470x
+chips are known to work:
+- 10c4:818a: Silicon Labs USB FM Radio Reference Design
+- 06e1:a155: ADS/Tech FM Radio Receiver (formerly Instant FM Music) (RDX-155-EF)
+- 1b80:d700: KWorld USB FM Radio SnapMusic Mobile 700 (FM700)
+
+
+Software
+========
+Testing is usually done with most application under Debian/testing:
+- fmtools - Utility for managing FM tuner cards
+- gnomeradio - FM-radio tuner for the GNOME desktop
+- gradio - GTK FM radio tuner
+- kradio - Comfortable Radio Application for KDE
+- radio - ncurses-based radio application
+
+There is also a library libv4l, which can be used. It's going to have a function
+for frequency seeking, either by using hardware functionality as in radio-si470x
+or by implementing a function as we currently have in every of the mentioned
+programs. Somewhen the radio programs should make use of libv4l.
+
+For processing RDS information, there is a project ongoing at:
+http://rdsd.berlios.de/
+
+There is currently no project for making TMC sentences human readable.
+
+
+Audio Listing
+=============
+USB Audio is provided by the ALSA snd_usb_audio module. It is recommended to
+also select SND_USB_AUDIO, as this is required to get sound from the radio. For
+listing you have to redirect the sound, for example using one of the following
+commands.
+
+If you just want to test audio (very poor quality):
+cat /dev/dsp1 > /dev/dsp
+
+If you use OSS try:
+sox -2 --endian little -r 96000 -t oss /dev/dsp1 -t oss /dev/dsp
+
+If you use arts try:
+arecord -D hw:1,0 -r96000 -c2 -f S16_LE | artsdsp aplay -B -
+
+
+Module Parameters
+=================
+After loading the module, you still have access to some of them in the sysfs
+mount under /sys/module/radio_si470x/parameters. The contents of read-only files
+(0444) are not updated, even if space, band and de are changed using private
+video controls. The others are runtime changeable.
+
+
+Errors
+======
+Increase tune_timeout, if you often get -EIO errors.
+
+When timed out or band limit is reached, hw_freq_seek returns -EAGAIN.
+
+If you get any errors from snd_usb_audio, please report them to the ALSA people.
+
+
+Open Issues
+===========
+V4L minor device allocation and parameter setting is not perfect. A solution is
+currently under discussion.
+
+There is an USB interface for downloading/uploading new firmware images. Support
+for it can be implemented using the request_firmware interface.
+
+There is a RDS interrupt mode. The driver is already using the same interface
+for polling RDS information, but is currently not using the interrupt mode.
+
+There is a LED interface, which can be used to override the LED control
+programmed in the firmware. This can be made available using the LED support
+functions in the kernel.
+
+
+Other useful information and links
+==================================
+http://www.silabs.com/usbradio

Documentation/w1/masters/omap-hdq

@@ -0,0 +1,46 @@
+Kernel driver for omap HDQ/1-wire module.
+========================================
+
+Supported chips:
+================
+	HDQ/1-wire controller on the TI OMAP 2430/3430 platforms.
+
+A useful link about HDQ basics:
+===============================
+http://focus.ti.com/lit/an/slua408/slua408.pdf
+
+Description:
+============
+The HDQ/1-Wire module of TI OMAP2430/3430 platforms implement the hardware
+protocol of the master functions of the Benchmark HDQ and the Dallas
+Semiconductor 1-Wire protocols. These protocols use a single wire for
+communication between the master (HDQ/1-Wire controller) and the slave
+(HDQ/1-Wire external compliant device).
+
+A typical application of the HDQ/1-Wire module is the communication with battery
+monitor (gas gauge) integrated circuits.
+
+The controller supports operation in both HDQ and 1-wire mode. The essential
+difference between the HDQ and 1-wire mode is how the slave device responds to
+initialization pulse.In HDQ mode, the firmware does not require the host to
+create an initialization pulse to the slave.However, the slave can be reset by
+using an initialization pulse (also referred to as a break pulse).The slave
+does not respond with a presence pulse as it does in the 1-Wire protocol.
+
+Remarks:
+========
+The driver (drivers/w1/masters/omap_hdq.c) supports the HDQ mode of the
+controller. In this mode, as we can not read the ID which obeys the W1
+spec(family:id:crc), a module parameter can be passed to the driver which will
+be used to calculate the CRC and pass back an appropriate slave ID to the W1
+core.
+
+By default the master driver and the BQ slave i/f
+driver(drivers/w1/slaves/w1_bq27000.c) sets the ID to 1.
+Please note to load both the modules with a different ID if required, but note
+that the ID used should be same for both master and slave driver loading.
+
+e.g:
+insmod omap_hdq.ko W1_ID=2
+inamod w1_bq27000.ko F_ID=2
+

MAINTAINERS

@@ -721,7 +721,7 @@ W:	http://sourceforge.net/projects/acpi4asus
 W:	http://xf.iksaif.net/acpi4asus
 S:	Maintained
 
-ASYNCHRONOUS TRANSFERS/TRANSFORMS API
+ASYNCHRONOUS TRANSFERS/TRANSFORMS (IOAT) API
 P:	Dan Williams
 M:	dan.j.williams@intel.com
 P:	Maciej Sosnowski
@@ -779,6 +779,7 @@ ATM
 P:	Chas Williams
 M:	chas@cmf.nrl.navy.mil
 L:	linux-atm-general@lists.sourceforge.net (subscribers-only)
+L:	netdev@vger.kernel.org
 W:	http://linux-atm.sourceforge.net
 S:	Maintained
 
@@ -1526,10 +1527,10 @@ W:	http://ebtables.sourceforge.net/
 S:	Maintained
 
 ECRYPT FILE SYSTEM
-P:	Mike Halcrow, Phillip Hellewell
-M:	mhalcrow@us.ibm.com, phillip@hellewell.homeip.net
-L:	ecryptfs-devel@lists.sourceforge.net
-W:	http://ecryptfs.sourceforge.net/
+P:	Tyler Hicks, Dustin Kirkland
+M:	tyhicks@linux.vnet.ibm.com, kirkland@canonical.com
+L:	ecryptfs-devel@lists.launchpad.net
+W:	https://launchpad.net/ecryptfs
 S:	Supported
 
 EDAC-CORE
@@ -1809,7 +1810,7 @@ S:	Maintained
 
 FTRACE
 P:	Steven Rostedt
-M:	srostedt@redhat.com
+M:	rostedt@goodmis.org
 S:	Maintained
 
 FUJITSU FR-V (FRV) PORT
@@ -1879,6 +1880,37 @@ M:	linux-kernel@vger.kernel.org
 W:	http://www.kernel.org/pub/linux/kernel/people/rml/hdaps/
 S:	Maintained
 
+GSPCA FINEPIX SUBDRIVER
+P:	Frank Zago
+M:	frank@zago.net
+L:	video4linux-list@redhat.com
+S:	Maintained
+
+GSPCA M5602 SUBDRIVER
+P:	Erik Andren
+M:	erik.andren@gmail.com
+L:	video4linux-list@redhat.com
+S:	Maintained
+
+GSPCA PAC207 SONIXB SUBDRIVER
+P:	Hans de Goede
+M:	hdegoede@redhat.com
+L:	video4linux-list@redhat.com
+S:	Maintained
+
+GSPCA T613 SUBDRIVER
+P:	Leandro Costantino
+M:	lcostantino@gmail.com
+L:	video4linux-list@redhat.com
+S:	Maintained
+
+GSPCA USB WEBCAM DRIVER
+P:	Jean-Francois Moine
+M:	moinejf@free.fr
+W:	http://moinejf.free.fr
+L:	video4linux-list@redhat.com
+S:	Maintained
+
 HARDWARE MONITORING
 L:	lm-sensors@lm-sensors.org
 W:	http://www.lm-sensors.org/
@@ -2185,6 +2217,13 @@ M:	adaplas@gmail.com
 L:	linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
 S:	Maintained
 
+INTEL MENLOW THERMAL DRIVER
+P:	Sujith Thomas
+M:	sujith.thomas@intel.com
+L:	linux-acpi@vger.kernel.org
+W:	http://www.lesswatts.org/projects/acpi/
+S:	Supported
+
 INTEL IA32 MICROCODE UPDATE SUPPORT
 P:	Tigran Aivazian
 M:	tigran@aivazian.fsnet.co.uk
@@ -2665,6 +2704,11 @@ P:	Arnaldo Carvalho de Melo
 M:	acme@ghostprotocols.net
 S:	Maintained
 
+LIS3LV02D ACCELEROMETER DRIVER
+P:	Eric Piel
+M:	eric.piel@tremplin-utc.net
+S:	Maintained
+
 LM83 HARDWARE MONITOR DRIVER
 P:	Jean Delvare
 M:	khali@linux-fr.org
@@ -3346,7 +3390,9 @@ S:	Maintained
 
 PNP SUPPORT
 P:	Adam Belay
-M:	ambx1@neo.rr.com
+M:	abelay@mit.edu
+P:	Bjorn Helgaas
+M:	bjorn.helgaas@hp.com
 S:	Maintained
 
 PNXxxxx I2C DRIVER
@@ -3713,6 +3759,15 @@ M:	drzeus-sdhci@drzeus.cx
 L:	sdhci-devel@list.drzeus.cx
 S:	Maintained
 
+SECURITY SUBSYSTEM
+F:	security/
+P:	James Morris
+M:	jmorris@namei.org
+L:	linux-kernel@vger.kernel.org
+L:	linux-security-module@vger.kernel.org (suggested Cc:)
+T:	git kernel.org:pub/scm/linux/kernel/git/jmorris/security-testing-2.6.git
+S:	Supported
+
 SECURITY CONTACT
 P:	Security Officers
 M:	security@kernel.org
@@ -3883,8 +3938,6 @@ M:	bootc@bootc.net
 S:	Maintained
 
 SOFTWARE RAID (Multiple Disks) SUPPORT
-P:	Ingo Molnar
-M:	mingo@redhat.com
 P:	Neil Brown
 M:	neilb@suse.de
 L:	linux-raid@vger.kernel.org
@@ -4192,7 +4245,7 @@ M:	dedekind@infradead.org
 P:	Adrian Hunter
 M:	ext-adrian.hunter@nokia.com
 L:	linux-mtd@lists.infradead.org
-T:	git git://git.infradead.org/~dedekind/ubifs-2.6.git
+T:	git git://git.infradead.org/ubifs-2.6.git
 W:	http://www.linux-mtd.infradead.org/doc/ubifs.html
 S:	Maintained
 
@@ -4246,7 +4299,7 @@ P:	Artem Bityutskiy
 M:	dedekind@infradead.org
 W:	http://www.linux-mtd.infradead.org/
 L:	linux-mtd@lists.infradead.org
-T:	git git://git.infradead.org/~dedekind/ubi-2.6.git
+T:	git git://git.infradead.org/ubi-2.6.git
 S:	Maintained
 
 USB ACM DRIVER

Makefile

@@ -1,8 +1,8 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 28
-EXTRAVERSION = -rc3
-NAME = Killer Bat of Doom
+EXTRAVERSION = -rc8
+NAME = Erotic Pickled Herring
 
 # *DOCUMENTATION*
 # To see a list of typical targets execute "make help"

arch/Kconfig

@@ -21,7 +21,7 @@ config OPROFILE_IBS
           Instruction-Based Sampling (IBS) is a new profiling
           technique that provides rich, precise program performance
           information. IBS is introduced by AMD Family10h processors
-          (AMD Opteron Quad-Core processor “Barcelona”) to overcome
+          (AMD Opteron Quad-Core processor "Barcelona") to overcome
           the limitations of conventional performance counter
           sampling.
 
@@ -79,8 +79,6 @@ config HAVE_KRETPROBES
 #	task_pt_regs()		in asm/processor.h or asm/ptrace.h
 #	arch_has_single_step()	if there is hardware single-step support
 #	arch_has_block_step()	if there is hardware block-step support
-#	arch_ptrace()		and not #define __ARCH_SYS_PTRACE
-#	compat_arch_ptrace()	and #define __ARCH_WANT_COMPAT_SYS_PTRACE
 #	asm/syscall.h		supplying asm-generic/syscall.h interface
 #	linux/regset.h		user_regset interfaces
 #	CORE_DUMP_USE_REGSET	#define'd in linux/elf.h

arch/alpha/kernel/pci.c

@@ -338,7 +338,7 @@ common_swizzle(struct pci_dev *dev, u8 *pinp)
 	return PCI_SLOT(dev->devfn);
 }
 
-void __devinit
+void
 pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
 			 struct resource *res)
 {

arch/alpha/kernel/smp.c

@@ -121,7 +121,7 @@ wait_boot_cpu_to_stop(int cpuid)
 /*
  * Where secondaries begin a life of C.
  */
-void __init
+void __cpuinit
 smp_callin(void)
 {
 	int cpuid = hard_smp_processor_id();
@@ -198,7 +198,7 @@ wait_for_txrdy (unsigned long cpumask)
  * Send a message to a secondary's console.  "START" is one such
  * interesting message.  ;-)
  */
-static void __init
+static void __cpuinit
 send_secondary_console_msg(char *str, int cpuid)
 {
 	struct percpu_struct *cpu;
@@ -289,7 +289,7 @@ recv_secondary_console_msg(void)
 /*
  * Convince the console to have a secondary cpu begin execution.
  */
-static int __init
+static int __cpuinit
 secondary_cpu_start(int cpuid, struct task_struct *idle)
 {
 	struct percpu_struct *cpu;

arch/alpha/kernel/traps.c

@@ -31,7 +31,7 @@
 
 static int opDEC_fix;
 
-static void __init
+static void __cpuinit
 opDEC_check(void)
 {
 	__asm__ __volatile__ (
@@ -1072,7 +1072,7 @@ give_sigbus:
 	return;
 }
 
-void __init
+void __cpuinit
 trap_init(void)
 {
 	/* Tell PAL-code what global pointer we want in the kernel.  */

arch/arm/common/sa1111.c

@@ -630,7 +630,7 @@ __sa1111_probe(struct device *me, struct resource *mem, int irq)
 		return -ENOMEM;
 
 	sachip->clk = clk_get(me, "SA1111_CLK");
-	if (!sachip->clk) {
+	if (IS_ERR(sachip->clk)) {
 		ret = PTR_ERR(sachip->clk);
 		goto err_free;
 	}

arch/arm/configs/corgi_defconfig

@@ -179,7 +179,7 @@ CONFIG_MACH_HUSKY=y
 # CONFIG_MACH_AKITA is not set
 # CONFIG_MACH_SPITZ is not set
 # CONFIG_MACH_BORZOI is not set
-CONFIG_MACH_TOSA=y
+# CONFIG_MACH_TOSA is not set
 # CONFIG_ARCH_VIPER is not set
 # CONFIG_ARCH_PXA_ESERIES is not set
 # CONFIG_TRIZEPS_PXA is not set

arch/arm/include/asm/bitops.h

@@ -237,6 +237,7 @@ extern int _find_next_bit_be(const unsigned long *p, int size, int offset);
 #if __LINUX_ARM_ARCH__ < 5
 
 #include <asm-generic/bitops/ffz.h>
+#include <asm-generic/bitops/__fls.h>
 #include <asm-generic/bitops/__ffs.h>
 #include <asm-generic/bitops/fls.h>
 #include <asm-generic/bitops/ffs.h>
@@ -277,16 +278,19 @@ static inline int constant_fls(int x)
  * the clz instruction for much better code efficiency.
  */
 
-#define __fls(x) \
-	( __builtin_constant_p(x) ? constant_fls(x) : \
-	  ({ int __r; asm("clz\t%0, %1" : "=r"(__r) : "r"(x) : "cc"); 32-__r; }) )
-
-/* Implement fls() in C so that 64-bit args are suitably truncated */
 static inline int fls(int x)
 {
-	return __fls(x);
+	int ret;
+
+	if (__builtin_constant_p(x))
+	       return constant_fls(x);
+
+	asm("clz\t%0, %1" : "=r" (ret) : "r" (x) : "cc");
+       	ret = 32 - ret;
+	return ret;
 }
 
+#define __fls(x) (fls(x) - 1)
 #define ffs(x) ({ unsigned long __t = (x); fls(__t & -__t); })
 #define __ffs(x) (ffs(x) - 1)
 #define ffz(x) __ffs( ~(x) )

arch/arm/include/asm/dma-mapping.h

@@ -256,8 +256,17 @@ int dmabounce_sync_for_cpu(struct device *, dma_addr_t, unsigned long,
 int dmabounce_sync_for_device(struct device *, dma_addr_t, unsigned long,
 		size_t, enum dma_data_direction);
 #else
-#define dmabounce_sync_for_cpu(dev,dma,off,sz,dir)	(1)
-#define dmabounce_sync_for_device(dev,dma,off,sz,dir)	(1)
+static inline int dmabounce_sync_for_cpu(struct device *d, dma_addr_t addr,
+	unsigned long offset, size_t size, enum dma_data_direction dir)
+{
+	return 1;
+}
+
+static inline int dmabounce_sync_for_device(struct device *d, dma_addr_t addr,
+	unsigned long offset, size_t size, enum dma_data_direction dir)
+{
+	return 1;
+}
 
 
 /**

arch/arm/include/asm/hardware/iop3xx-adma.h

@@ -730,7 +730,8 @@ static inline void iop_desc_set_next_desc(struct iop_adma_desc_slot *desc,
 {
 	/* hw_desc->next_desc is the same location for all channels */
 	union iop3xx_desc hw_desc = { .ptr = desc->hw_desc, };
-	BUG_ON(hw_desc.dma->next_desc);
+
+	iop_paranoia(hw_desc.dma->next_desc);
 	hw_desc.dma->next_desc = next_desc_addr;
 }
 
@@ -760,7 +761,7 @@ static inline int iop_desc_get_zero_result(struct iop_adma_desc_slot *desc)
 	struct iop3xx_desc_aau *hw_desc = desc->hw_desc;
 	struct iop3xx_aau_desc_ctrl desc_ctrl = hw_desc->desc_ctrl_field;
 
-	BUG_ON(!(desc_ctrl.tx_complete && desc_ctrl.zero_result_en));
+	iop_paranoia(!(desc_ctrl.tx_complete && desc_ctrl.zero_result_en));
 	return desc_ctrl.zero_result_err;
 }
 

arch/arm/include/asm/hardware/iop_adma.h

@@ -23,6 +23,12 @@
 
 #define IOP_ADMA_SLOT_SIZE 32
 #define IOP_ADMA_THRESHOLD 4
+#ifdef DEBUG
+#define IOP_PARANOIA 1
+#else
+#define IOP_PARANOIA 0
+#endif
+#define iop_paranoia(x) BUG_ON(IOP_PARANOIA && (x))
 
 /**
  * struct iop_adma_device - internal representation of an ADMA device

arch/arm/include/asm/mach/map.h

@@ -19,12 +19,13 @@ struct map_desc {
 };
 
 /* types 0-3 are defined in asm/io.h */
-#define MT_CACHECLEAN		4
-#define MT_MINICLEAN		5
-#define MT_LOW_VECTORS		6
-#define MT_HIGH_VECTORS		7
-#define MT_MEMORY		8
-#define MT_ROM			9
+#define MT_UNCACHED		4
+#define MT_CACHECLEAN		5
+#define MT_MINICLEAN		6
+#define MT_LOW_VECTORS		7
+#define MT_HIGH_VECTORS		8
+#define MT_MEMORY		9
+#define MT_ROM			10
 
 #ifdef CONFIG_MMU
 extern void iotable_init(struct map_desc *, int);

arch/arm/include/asm/memory.h

@@ -44,10 +44,10 @@
  * The module space lives between the addresses given by TASK_SIZE
  * and PAGE_OFFSET - it must be within 32MB of the kernel text.
  */
-#define MODULE_END		(PAGE_OFFSET)
-#define MODULE_START		(MODULE_END - 16*1048576)
+#define MODULES_END		(PAGE_OFFSET)
+#define MODULES_VADDR		(MODULES_END - 16*1048576)
 
-#if TASK_SIZE > MODULE_START
+#if TASK_SIZE > MODULES_VADDR
 #error Top of user space clashes with start of module space
 #endif
 
@@ -56,7 +56,7 @@
  * Since we use sections to map it, this macro replaces the physical address
  * with its virtual address while keeping offset from the base section.
  */
-#define XIP_VIRT_ADDR(physaddr)  (MODULE_START + ((physaddr) & 0x000fffff))
+#define XIP_VIRT_ADDR(physaddr)  (MODULES_VADDR + ((physaddr) & 0x000fffff))
 
 /*
  * Allow 16MB-aligned ioremap pages
@@ -94,8 +94,8 @@
 /*
  * The module can be at any place in ram in nommu mode.
  */
-#define MODULE_END		(END_MEM)
-#define MODULE_START		(PHYS_OFFSET)
+#define MODULES_END		(END_MEM)
+#define MODULES_VADDR		(PHYS_OFFSET)
 
 #endif /* !CONFIG_MMU */
 

arch/arm/include/asm/processor.h

@@ -23,7 +23,7 @@
 #include <asm/types.h>
 
 #ifdef __KERNEL__
-#define STACK_TOP	((current->personality == PER_LINUX_32BIT) ? \
+#define STACK_TOP	((current->personality & ADDR_LIMIT_32BIT) ? \
 			 TASK_SIZE : TASK_SIZE_26)
 #define STACK_TOP_MAX	TASK_SIZE
 #endif

arch/arm/include/asm/system.h

@@ -42,6 +42,10 @@
 #define CR_U	(1 << 22)	/* Unaligned access operation		*/
 #define CR_XP	(1 << 23)	/* Extended page tables			*/
 #define CR_VE	(1 << 24)	/* Vectored interrupts			*/
+#define CR_EE	(1 << 25)	/* Exception (Big) Endian		*/
+#define CR_TRE	(1 << 28)	/* TEX remap enable			*/
+#define CR_AFE	(1 << 29)	/* Access flag enable			*/
+#define CR_TE	(1 << 30)	/* Thumb exception enable		*/
 
 /*
  * This is used to ensure the compiler did actually allocate the register we

arch/arm/kernel/armksyms.c

@@ -115,6 +115,8 @@ EXPORT_SYMBOL(__strnlen_user);
 EXPORT_SYMBOL(__strncpy_from_user);
 
 #ifdef CONFIG_MMU
+EXPORT_SYMBOL(copy_page);
+
 EXPORT_SYMBOL(__copy_from_user);
 EXPORT_SYMBOL(__copy_to_user);
 EXPORT_SYMBOL(__clear_user);
@@ -181,8 +183,6 @@ EXPORT_SYMBOL(_find_first_bit_be);
 EXPORT_SYMBOL(_find_next_bit_be);
 #endif
 
-EXPORT_SYMBOL(copy_page);
-
 #ifdef CONFIG_FUNCTION_TRACER
 EXPORT_SYMBOL(mcount);
 #endif

arch/arm/kernel/elf.c

@@ -21,12 +21,16 @@ int elf_check_arch(const struct elf32_hdr *x)
 
 	eflags = x->e_flags;
 	if ((eflags & EF_ARM_EABI_MASK) == EF_ARM_EABI_UNKNOWN) {
+		unsigned int flt_fmt;
+
 		/* APCS26 is only allowed if the CPU supports it */
 		if ((eflags & EF_ARM_APCS_26) && !(elf_hwcap & HWCAP_26BIT))
 			return 0;
 
+		flt_fmt = eflags & (EF_ARM_VFP_FLOAT | EF_ARM_SOFT_FLOAT);
+
 		/* VFP requires the supporting code */
-		if ((eflags & EF_ARM_VFP_FLOAT) && !(elf_hwcap & HWCAP_VFP))
+		if (flt_fmt == EF_ARM_VFP_FLOAT && !(elf_hwcap & HWCAP_VFP))
 			return 0;
 	}
 	return 1;

arch/arm/kernel/module.c

@@ -26,12 +26,12 @@
 /*
  * The XIP kernel text is mapped in the module area for modules and
  * some other stuff to work without any indirect relocations.
- * MODULE_START is redefined here and not in asm/memory.h to avoid
+ * MODULES_VADDR is redefined here and not in asm/memory.h to avoid
  * recompiling the whole kernel when CONFIG_XIP_KERNEL is turned on/off.
  */
 extern void _etext;
-#undef MODULE_START
-#define MODULE_START	(((unsigned long)&_etext + ~PGDIR_MASK) & PGDIR_MASK)
+#undef MODULES_VADDR
+#define MODULES_VADDR	(((unsigned long)&_etext + ~PGDIR_MASK) & PGDIR_MASK)
 #endif
 
 #ifdef CONFIG_MMU
@@ -43,7 +43,7 @@ void *module_alloc(unsigned long size)
 	if (!size)
 		return NULL;
 
-	area = __get_vm_area(size, VM_ALLOC, MODULE_START, MODULE_END);
+	area = __get_vm_area(size, VM_ALLOC, MODULES_VADDR, MODULES_END);
 	if (!area)
 		return NULL;
 

arch/arm/kernel/traps.c

@@ -18,6 +18,7 @@
 #include <linux/personality.h>
 #include <linux/kallsyms.h>
 #include <linux/delay.h>
+#include <linux/hardirq.h>
 #include <linux/init.h>
 #include <linux/uaccess.h>
 

arch/arm/mach-clps711x/include/mach/hardware.h

@@ -94,20 +94,6 @@
 #include <asm/hardware/ep7212.h>
 #include <asm/hardware/cs89712.h>
 
-/* dynamic ioremap() areas */
-#define FLASH_START      0x00000000
-#define FLASH_SIZE       0x800000
-#define FLASH_WIDTH      4
-
-#define SRAM_START       0x60000000
-#define SRAM_SIZE        0xc000
-#define SRAM_WIDTH       4
-
-#define BOOTROM_START    0x70000000
-#define BOOTROM_SIZE     0x80
-#define BOOTROM_WIDTH    4
-
-
 /* static cdb89712_map_io() areas */
 #define REGISTER_START   0x80000000
 #define REGISTER_SIZE    0x4000
@@ -198,14 +184,6 @@
 #define CEIVA_FLASH_SIZE        0x100000
 #define CEIVA_FLASH_WIDTH       2
 
-#define SRAM_START       0x60000000
-#define SRAM_SIZE        0xc000
-#define SRAM_WIDTH       4
-
-#define BOOTROM_START    0x70000000
-#define BOOTROM_SIZE     0x80
-#define BOOTROM_WIDTH    4
-
 /*
  * SED1355 LCD controller
  */

arch/arm/mach-clps7500/core.c

@@ -275,9 +275,9 @@ static struct map_desc cl7500_io_desc[] __initdata = {
 		.length		= ISA_SIZE,
 		.type		= MT_DEVICE
 	}, {	/* Flash	*/
-		.virtual	= FLASH_BASE,
-		.pfn		= __phys_to_pfn(FLASH_START),
-		.length		= FLASH_SIZE,
+		.virtual	= CLPS7500_FLASH_BASE,
+		.pfn		= __phys_to_pfn(CLPS7500_FLASH_START),
+		.length		= CLPS7500_FLASH_SIZE,
 		.type		= MT_DEVICE
 	}, {	/* LED		*/
 		.virtual	= LED_BASE,

arch/arm/mach-clps7500/include/mach/hardware.h

@@ -39,9 +39,9 @@
 #define ISA_SIZE		0x00010000
 #define ISA_BASE		0xe1000000
 
-#define FLASH_START		0x01000000	/* XXX */
-#define FLASH_SIZE		0x01000000
-#define FLASH_BASE		0xe2000000
+#define CLPS7500_FLASH_START	0x01000000	/* XXX */
+#define CLPS7500_FLASH_SIZE	0x01000000
+#define CLPS7500_FLASH_BASE	0xe2000000
 
 #define LED_START		0x0302B000
 #define LED_SIZE		0x00001000

arch/arm/mach-h720x/include/mach/boards.h

@@ -19,9 +19,9 @@
 #ifdef CONFIG_ARCH_H7202
 
 /* FLASH */
-#define FLASH_VIRT		0xd0000000
-#define FLASH_PHYS		0x00000000
-#define FLASH_SIZE		0x02000000
+#define H720X_FLASH_VIRT	0xd0000000
+#define H720X_FLASH_PHYS	0x00000000
+#define H720X_FLASH_SIZE	0x02000000
 
 /* onboard LAN controller */
 # define ETH0_PHYS		0x08000000

arch/arm/mach-integrator/include/mach/platform.h

@@ -407,28 +407,11 @@
  */
 #define uHAL_MEMORY_SIZE                INTEGRATOR_SSRAM_SIZE
 
-/*
- *  Application Flash
- *
- */
-#define FLASH_BASE                      INTEGRATOR_FLASH_BASE
-#define FLASH_SIZE                      INTEGRATOR_FLASH_SIZE
-#define FLASH_END                       (FLASH_BASE + FLASH_SIZE - 1)
-#define FLASH_BLOCK_SIZE                SZ_128K
-
-/*
- *  Boot Flash
- *
- */
-#define EPROM_BASE                      INTEGRATOR_BOOT_ROM_HI
-#define EPROM_SIZE                      INTEGRATOR_BOOT_ROM_SIZE
-#define EPROM_END                       (EPROM_BASE + EPROM_SIZE - 1)
-
 /*
  *  Clean base - dummy
  *
  */
-#define CLEAN_BASE                      EPROM_BASE
+#define CLEAN_BASE                      INTEGRATOR_BOOT_ROM_HI
 
 /*
  *  Timer definitions

arch/arm/mach-iop13xx/include/mach/adma.h

@@ -404,7 +404,8 @@ static inline void iop_desc_set_next_desc(struct iop_adma_desc_slot *desc,
 					u32 next_desc_addr)
 {
 	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
-	BUG_ON(hw_desc->next_desc);
+
+	iop_paranoia(hw_desc->next_desc);
 	hw_desc->next_desc = next_desc_addr;
 }
 

arch/arm/mach-omap1/io.c

@@ -128,7 +128,7 @@ void __init omap1_map_common_io(void)
  * Common low-level hardware init for omap1. This should only get called from
  * board specific init.
  */
-void __init omap1_init_common_hw()
+void __init omap1_init_common_hw(void)
 {
 	/* REVISIT: Refer to OMAP5910 Errata, Advisory SYS_1: "Timeout Abort
 	 * on a Posted Write in the TIPB Bridge".

arch/arm/mach-omap2/gpmc.c

@@ -429,18 +429,16 @@ void __init gpmc_init(void)
 	gpmc_l3_clk = clk_get(NULL, ck);
 	if (IS_ERR(gpmc_l3_clk)) {
 		printk(KERN_ERR "Could not get GPMC clock %s\n", ck);
-		return -ENODEV;
+		BUG();
 	}
 
 	gpmc_base = ioremap(l, SZ_4K);
 	if (!gpmc_base) {
 		clk_put(gpmc_l3_clk);
 		printk(KERN_ERR "Could not get GPMC register memory\n");
-		return -ENOMEM;
+		BUG();
 	}
 
-	BUG_ON(IS_ERR(gpmc_l3_clk));
-
 	l = gpmc_read_reg(GPMC_REVISION);
 	printk(KERN_INFO "GPMC revision %d.%d\n", (l >> 4) & 0x0f, l & 0x0f);
 	/* Set smart idle mode and automatic L3 clock gating */

arch/arm/mach-pxa/include/mach/pxafb.h

@@ -33,6 +33,7 @@
 #define LCD_CONN_TYPE(_x)	((_x) & 0x0f)
 #define LCD_CONN_WIDTH(_x)	(((_x) >> 4) & 0x1f)
 
+#define LCD_TYPE_MASK		0xf
 #define LCD_TYPE_UNKNOWN	0
 #define LCD_TYPE_MONO_STN	1
 #define LCD_TYPE_MONO_DSTN	2

arch/arm/mach-pxa/include/mach/reset.h

@@ -12,9 +12,8 @@ extern void clear_reset_status(unsigned int mask);
 
 /**
  * init_gpio_reset() - register GPIO as reset generator
- *
- * @gpio - gpio nr
- * @output - set gpio as out/low instead of input during normal work
+ * @gpio: gpio nr
+ * @output: set gpio as out/low instead of input during normal work
  */
 extern int init_gpio_reset(int gpio, int output);
 

arch/arm/mach-pxa/mioa701.c

@@ -565,7 +565,7 @@ static int mioa701_sys_suspend(struct sys_device *sysdev, pm_message_t state)
 	u32 *mem_resume_unknown	= phys_to_virt(RESUME_UNKNOWN_ADDR);
 
 	/* Devices prepare suspend */
-	is_bt_on = gpio_get_value(GPIO83_BT_ON);
+	is_bt_on = !!gpio_get_value(GPIO83_BT_ON);
 	pxa2xx_mfp_set_lpm(GPIO83_BT_ON,
 			   is_bt_on ? MFP_LPM_DRIVE_HIGH : MFP_LPM_DRIVE_LOW);
 

arch/arm/mach-pxa/mioa701_bootresume.S

@@ -24,6 +24,7 @@ ENTRY(mioa701_jumpaddr)
 1:
 	mov	r0,     #0xa0000000	@ Don't suppose memory access works
 	orr	r0, r0, #0x00200000	@ even if it's supposed to
+	orr	r0, r0, #0x0000b000
 	mov	r1, #0
 	str	r1, [r0]		@ Early disable resume for next boot
 	ldr	r0, mioa701_jumpaddr	@ (Murphy's Law)

arch/arm/mach-pxa/palmtx.c

@@ -56,6 +56,9 @@ static unsigned long palmtx_pin_config[] __initdata = {
 	GPIO110_MMC_DAT_2,
 	GPIO111_MMC_DAT_3,
 	GPIO112_MMC_CMD,
+	GPIO14_GPIO,	/* SD detect */
+	GPIO114_GPIO,	/* SD power */
+	GPIO115_GPIO,	/* SD r/o switch */
 
 	/* AC97 */
 	GPIO28_AC97_BITCLK,
@@ -64,6 +67,7 @@ static unsigned long palmtx_pin_config[] __initdata = {
 	GPIO31_AC97_SYNC,
 
 	/* IrDA */
+	GPIO40_GPIO,	/* ir disable */
 	GPIO46_FICP_RXD,
 	GPIO47_FICP_TXD,
 
@@ -71,7 +75,8 @@ static unsigned long palmtx_pin_config[] __initdata = {
 	GPIO16_PWM0_OUT,
 
 	/* USB */
-	GPIO13_GPIO,
+	GPIO13_GPIO,	/* usb detect */
+	GPIO95_GPIO,	/* usb power */
 
 	/* PCMCIA */
 	GPIO48_nPOE,
@@ -84,6 +89,45 @@ static unsigned long palmtx_pin_config[] __initdata = {
 	GPIO55_nPREG,
 	GPIO56_nPWAIT,
 	GPIO57_nIOIS16,
+	GPIO94_GPIO,	/* wifi power 1 */
+	GPIO108_GPIO,	/* wifi power 2 */
+	GPIO116_GPIO,	/* wifi ready */
+
+	/* MATRIX KEYPAD */
+	GPIO100_KP_MKIN_0,
+	GPIO101_KP_MKIN_1,
+	GPIO102_KP_MKIN_2,
+	GPIO97_KP_MKIN_3,
+	GPIO103_KP_MKOUT_0,
+	GPIO104_KP_MKOUT_1,
+	GPIO105_KP_MKOUT_2,
+
+	/* LCD */
+	GPIO58_LCD_LDD_0,
+	GPIO59_LCD_LDD_1,
+	GPIO60_LCD_LDD_2,
+	GPIO61_LCD_LDD_3,
+	GPIO62_LCD_LDD_4,
+	GPIO63_LCD_LDD_5,
+	GPIO64_LCD_LDD_6,
+	GPIO65_LCD_LDD_7,
+	GPIO66_LCD_LDD_8,
+	GPIO67_LCD_LDD_9,
+	GPIO68_LCD_LDD_10,
+	GPIO69_LCD_LDD_11,
+	GPIO70_LCD_LDD_12,
+	GPIO71_LCD_LDD_13,
+	GPIO72_LCD_LDD_14,
+	GPIO73_LCD_LDD_15,
+	GPIO74_LCD_FCLK,
+	GPIO75_LCD_LCLK,
+	GPIO76_LCD_PCLK,
+	GPIO77_LCD_BIAS,
+
+	/* MISC. */
+	GPIO10_GPIO,	/* hotsync button */
+	GPIO12_GPIO,	/* power detect */
+	GPIO107_GPIO,	/* earphone detect */
 };
 
 /******************************************************************************
@@ -95,32 +139,49 @@ static int palmtx_mci_init(struct device *dev, irq_handler_t palmtx_detect_int,
 	int err = 0;
 
 	/* Setup an interrupt for detecting card insert/remove events */
-	err = request_irq(IRQ_GPIO_PALMTX_SD_DETECT_N, palmtx_detect_int,
-			IRQF_DISABLED | IRQF_SAMPLE_RANDOM |
+	err = gpio_request(GPIO_NR_PALMTX_SD_DETECT_N, "SD IRQ");
+	if (err)
+		goto err;
+	err = gpio_direction_input(GPIO_NR_PALMTX_SD_DETECT_N);
+	if (err)
+		goto err2;
+	err = request_irq(gpio_to_irq(GPIO_NR_PALMTX_SD_DETECT_N),
+			palmtx_detect_int, IRQF_DISABLED | IRQF_SAMPLE_RANDOM |
 			IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
 			"SD/MMC card detect", data);
 	if (err) {
 		printk(KERN_ERR "%s: cannot request SD/MMC card detect IRQ\n",
 				__func__);
-		return err;
+		goto err2;
 	}
 
 	err = gpio_request(GPIO_NR_PALMTX_SD_POWER, "SD_POWER");
 	if (err)
-		goto pwr_err;
+		goto err3;
+	err = gpio_direction_output(GPIO_NR_PALMTX_SD_POWER, 0);
+	if (err)
+		goto err4;
 
 	err = gpio_request(GPIO_NR_PALMTX_SD_READONLY, "SD_READONLY");
 	if (err)
-		goto ro_err;
+		goto err4;
+	err = gpio_direction_input(GPIO_NR_PALMTX_SD_READONLY);
+	if (err)
+		goto err5;
 
 	printk(KERN_DEBUG "%s: irq registered\n", __func__);
 
 	return 0;
 
-ro_err:
+err5:
+	gpio_free(GPIO_NR_PALMTX_SD_READONLY);
+err4:
 	gpio_free(GPIO_NR_PALMTX_SD_POWER);
-pwr_err:
-	free_irq(IRQ_GPIO_PALMTX_SD_DETECT_N, data);
+err3:
+	free_irq(gpio_to_irq(GPIO_NR_PALMTX_SD_DETECT_N), data);
+err2:
+	gpio_free(GPIO_NR_PALMTX_SD_DETECT_N);
+err:
 	return err;
 }
 
@@ -128,7 +189,8 @@ static void palmtx_mci_exit(struct device *dev, void *data)
 {
 	gpio_free(GPIO_NR_PALMTX_SD_READONLY);
 	gpio_free(GPIO_NR_PALMTX_SD_POWER);
-	free_irq(IRQ_GPIO_PALMTX_SD_DETECT_N, data);
+	free_irq(gpio_to_irq(GPIO_NR_PALMTX_SD_DETECT_N), data);
+	gpio_free(GPIO_NR_PALMTX_SD_DETECT_N);
 }
 
 static void palmtx_mci_power(struct device *dev, unsigned int vdd)
@@ -167,7 +229,6 @@ static unsigned int palmtx_matrix_keys[] = {
 
 	KEY(3, 0, KEY_RIGHT),
 	KEY(3, 2, KEY_LEFT),
-
 };
 
 static struct pxa27x_keypad_platform_data palmtx_keypad_platform_data = {
@@ -209,11 +270,19 @@ static int palmtx_backlight_init(struct device *dev)
 	ret = gpio_request(GPIO_NR_PALMTX_BL_POWER, "BL POWER");
 	if (ret)
 		goto err;
+	ret = gpio_direction_output(GPIO_NR_PALMTX_BL_POWER, 0);
+	if (ret)
+		goto err2;
 	ret = gpio_request(GPIO_NR_PALMTX_LCD_POWER, "LCD POWER");
 	if (ret)
 		goto err2;
+	ret = gpio_direction_output(GPIO_NR_PALMTX_LCD_POWER, 0);
+	if (ret)
+		goto err3;
 
 	return 0;
+err3:
+	gpio_free(GPIO_NR_PALMTX_LCD_POWER);
 err2:
 	gpio_free(GPIO_NR_PALMTX_BL_POWER);
 err:
@@ -254,6 +323,24 @@ static struct platform_device palmtx_backlight = {
 /******************************************************************************
  * IrDA
  ******************************************************************************/
+static int palmtx_irda_startup(struct device *dev)
+{
+	int err;
+	err = gpio_request(GPIO_NR_PALMTX_IR_DISABLE, "IR DISABLE");
+	if (err)
+		goto err;
+	err = gpio_direction_output(GPIO_NR_PALMTX_IR_DISABLE, 1);
+	if (err)
+		gpio_free(GPIO_NR_PALMTX_IR_DISABLE);
+err:
+	return err;
+}
+
+static void palmtx_irda_shutdown(struct device *dev)
+{
+	gpio_free(GPIO_NR_PALMTX_IR_DISABLE);
+}
+
 static void palmtx_irda_transceiver_mode(struct device *dev, int mode)
 {
 	gpio_set_value(GPIO_NR_PALMTX_IR_DISABLE, mode & IR_OFF);
@@ -261,6 +348,8 @@ static void palmtx_irda_transceiver_mode(struct device *dev, int mode)
 }
 
 static struct pxaficp_platform_data palmtx_ficp_platform_data = {
+	.startup		= palmtx_irda_startup,
+	.shutdown		= palmtx_irda_shutdown,
 	.transceiver_cap	= IR_SIRMODE | IR_FIRMODE | IR_OFF,
 	.transceiver_mode	= palmtx_irda_transceiver_mode,
 };
@@ -268,17 +357,11 @@ static struct pxaficp_platform_data palmtx_ficp_platform_data = {
 /******************************************************************************
  * UDC
  ******************************************************************************/
-static void palmtx_udc_command(int cmd)
-{
-	gpio_set_value(GPIO_NR_PALMTX_USB_POWER, !cmd);
-	udelay(50);
-	gpio_set_value(GPIO_NR_PALMTX_USB_PULLUP, !cmd);
-}
-
 static struct pxa2xx_udc_mach_info palmtx_udc_info __initdata = {
 	.gpio_vbus		= GPIO_NR_PALMTX_USB_DETECT_N,
 	.gpio_vbus_inverted	= 1,
-	.udc_command		= palmtx_udc_command,
+	.gpio_pullup		= GPIO_NR_PALMTX_USB_POWER,
+	.gpio_pullup_inverted	= 0,
 };
 
 /******************************************************************************
@@ -290,17 +373,16 @@ static int power_supply_init(struct device *dev)
 
 	ret = gpio_request(GPIO_NR_PALMTX_POWER_DETECT, "CABLE_STATE_AC");
 	if (ret)
-		goto err_cs_ac;
-
-	ret = gpio_request(GPIO_NR_PALMTX_USB_DETECT_N, "CABLE_STATE_USB");
+		goto err1;
+	ret = gpio_direction_input(GPIO_NR_PALMTX_POWER_DETECT);
 	if (ret)
-		goto err_cs_usb;
+		goto err2;
 
 	return 0;
 
-err_cs_usb:
+err2:
 	gpio_free(GPIO_NR_PALMTX_POWER_DETECT);
-err_cs_ac:
+err1:
 	return ret;
 }
 
@@ -309,14 +391,8 @@ static int palmtx_is_ac_online(void)
 	return gpio_get_value(GPIO_NR_PALMTX_POWER_DETECT);
 }
 
-static int palmtx_is_usb_online(void)
-{
-	return !gpio_get_value(GPIO_NR_PALMTX_USB_DETECT_N);
-}
-
 static void power_supply_exit(struct device *dev)
 {
-	gpio_free(GPIO_NR_PALMTX_USB_DETECT_N);
 	gpio_free(GPIO_NR_PALMTX_POWER_DETECT);
 }
 
@@ -327,7 +403,6 @@ static char *palmtx_supplicants[] = {
 static struct pda_power_pdata power_supply_info = {
 	.init            = power_supply_init,
 	.is_ac_online    = palmtx_is_ac_online,
-	.is_usb_online   = palmtx_is_usb_online,
 	.exit            = power_supply_exit,
 	.supplied_to     = palmtx_supplicants,
 	.num_supplicants = ARRAY_SIZE(palmtx_supplicants),
@@ -410,12 +485,23 @@ static void __init palmtx_map_io(void)
 	iotable_init(palmtx_io_desc, ARRAY_SIZE(palmtx_io_desc));
 }
 
+/* setup udc GPIOs initial state */
+static void __init palmtx_udc_init(void)
+{
+	if (!gpio_request(GPIO_NR_PALMTX_USB_POWER, "UDC Vbus")) {
+		gpio_direction_output(GPIO_NR_PALMTX_USB_POWER, 1);
+		gpio_free(GPIO_NR_PALMTX_USB_POWER);
+	}
+}
+
+
 static void __init palmtx_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(palmtx_pin_config));
 
 	set_pxa_fb_info(&palmtx_lcd_screen);
 	pxa_set_mci_info(&palmtx_mci_platform_data);
+	palmtx_udc_init();
 	pxa_set_udc_info(&palmtx_udc_info);
 	pxa_set_ac97_info(NULL);
 	pxa_set_ficp_info(&palmtx_ficp_platform_data);

arch/arm/mach-pxa/pcm990-baseboard.c

@@ -385,6 +385,7 @@ static struct soc_camera_link iclink[] = {
 		.gpio	= NR_BUILTIN_GPIO + 1,
 	}, {
 		.bus_id	= 0, /* Must match with the camera ID above */
+		.gpio	= -ENXIO,
 	}
 };
 

arch/arm/mach-pxa/reset.c

@@ -90,12 +90,13 @@ void arch_reset(char mode)
 		/* Jump into ROM at address 0 */
 		cpu_reset(0);
 		break;
-	case 'h':
-		do_hw_reset();
-		break;
 	case 'g':
 		do_gpio_reset();
 		break;
+	case 'h':
+	default:
+		do_hw_reset();
+		break;
 	}
 }
 

arch/arm/mach-pxa/spitz.c

@@ -67,6 +67,7 @@
 static unsigned long spitz_pin_config[] __initdata = {
 	/* Chip Selects */
 	GPIO78_nCS_2,	/* SCOOP #2 */
+	GPIO79_nCS_3,	/* NAND */
 	GPIO80_nCS_4,	/* SCOOP #1 */
 
 	/* LCD - 16bpp Active TFT */
@@ -97,10 +98,10 @@ static unsigned long spitz_pin_config[] __initdata = {
 	GPIO51_nPIOW,
 	GPIO85_nPCE_1,
 	GPIO54_nPCE_2,
-	GPIO79_PSKTSEL,
 	GPIO55_nPREG,
 	GPIO56_nPWAIT,
 	GPIO57_nIOIS16,
+	GPIO104_PSKTSEL,
 
 	/* MMC */
 	GPIO32_MMC_CLK,
@@ -686,7 +687,6 @@ static void __init akita_init(void)
 	spitz_pcmcia_config.num_devs = 1;
 	platform_scoop_config = &spitz_pcmcia_config;
 
-	pxa_set_i2c_info(NULL);
 	i2c_register_board_info(0, ARRAY_AND_SIZE(akita_i2c_board_info));
 
 	common_init();

arch/arm/mach-realview/clock.c

@@ -104,7 +104,7 @@ static struct clk uart_clk = {
 
 static struct clk mmci_clk = {
 	.name	= "MCLK",
-	.rate	= 33000000,
+	.rate	= 24000000,
 };
 
 int clk_register(struct clk *clk)

arch/arm/mach-realview/include/mach/platform.h

@@ -238,28 +238,11 @@
 #define REALVIEW_INTREG_OFFSET		0x8	/* Interrupt control */
 #define REALVIEW_DECODE_OFFSET		0xC	/* Fitted logic modules */
 
-/* 
- *  Application Flash
- * 
- */
-#define FLASH_BASE                      REALVIEW_FLASH_BASE
-#define FLASH_SIZE                      REALVIEW_FLASH_SIZE
-#define FLASH_END                       (FLASH_BASE + FLASH_SIZE - 1)
-#define FLASH_BLOCK_SIZE                SZ_128K
-
-/* 
- *  Boot Flash
- * 
- */
-#define EPROM_BASE                      REALVIEW_BOOT_ROM_HI
-#define EPROM_SIZE                      REALVIEW_BOOT_ROM_SIZE
-#define EPROM_END                       (EPROM_BASE + EPROM_SIZE - 1)
-
 /* 
  *  Clean base - dummy
  * 
  */
-#define CLEAN_BASE                      EPROM_BASE
+#define CLEAN_BASE                      REALVIEW_BOOT_ROM_HI
 
 /*
  * System controller bit assignment

arch/arm/mach-s3c2410/include/mach/spi-gpio.h

@@ -18,6 +18,7 @@ struct s3c2410_spigpio_info {
 	unsigned long		 pin_mosi;
 	unsigned long		 pin_miso;
 
+	int			 num_chipselect;
 	int			 bus_num;
 
 	void (*chip_select)(struct s3c2410_spigpio_info *spi, int cs);

arch/arm/mach-versatile/clock.c

@@ -105,7 +105,7 @@ static struct clk uart_clk = {
 
 static struct clk mmci_clk = {
 	.name	= "MCLK",
-	.rate	= 33000000,
+	.rate	= 24000000,
 };
 
 int clk_register(struct clk *clk)