Merge branch 'next/cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc

* 'next/cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc: (133 commits)
  ARM: EXYNOS4: Change devname for FIMD clkdev
  ARM: S3C64XX: Cleanup mach/regs-fb.h from mach-s3c64xx
  ARM: S5PV210: Cleanup mach/regs-fb.h from mach-s5pv210
  ARM: S5PC100: Cleanup mach/regs-fb.h from mach-s5pc100
  ARM: S3C24XX: Use generic s3c_set_platdata for devices
  ARM: S3C64XX: Use generic s3c_set_platdata for OneNAND
  ARM: SAMSUNG: Use generic s3c_set_platdata for NAND
  ARM: SAMSUNG: Use generic s3c_set_platdata for USB OHCI
  ARM: SAMSUNG: Use generic s3c_set_platdata for HWMON
  ARM: SAMSUNG: Use generic s3c_set_platdata for FB
  ARM: SAMSUNG: Use generic s3c_set_platdata for TS
  ARM: S3C64XX: Add PWM backlight support on SMDK6410
  ARM: S5P64X0: Add PWM backlight support on SMDK6450
  ARM: S5P64X0: Add PWM backlight support on SMDK6440
  ARM: S5PC100: Add PWM backlight support on SMDKC100
  ARM: S5PV210: Add PWM backlight support on SMDKV210
  ARM: EXYNOS4: Add PWM backlight support on SMDKC210
  ARM: EXYNOS4: Add PWM backlight support on SMDKV310
  ARM: SAMSUNG: Create a common infrastructure for PWM backlight support
  clocksource: convert 32-bit down counting clocksource on S5PV210/S5P64X0
  ...

Fix up trivial conflict in arch/arm/mach-imx/mach-scb9328.c

arch/arm/Kconfig

@@ -686,6 +686,7 @@ config ARCH_S3C2410
 	select GENERIC_GPIO
 	select ARCH_HAS_CPUFREQ
 	select HAVE_CLK
+	select CLKDEV_LOOKUP
 	select ARCH_USES_GETTIMEOFFSET
 	select HAVE_S3C2410_I2C if I2C
 	help
@@ -703,6 +704,7 @@ config ARCH_S3C64XX
 	select CPU_V6
 	select ARM_VIC
 	select HAVE_CLK
+	select CLKDEV_LOOKUP
 	select NO_IOPORT
 	select ARCH_USES_GETTIMEOFFSET
 	select ARCH_HAS_CPUFREQ
@@ -727,6 +729,8 @@ config ARCH_S5P64X0
 	select CPU_V6
 	select GENERIC_GPIO
 	select HAVE_CLK
+	select CLKDEV_LOOKUP
+	select CLKSRC_MMIO
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
 	select GENERIC_CLOCKEVENTS
 	select HAVE_SCHED_CLOCK
@@ -740,6 +744,7 @@ config ARCH_S5PC100
 	bool "Samsung S5PC100"
 	select GENERIC_GPIO
 	select HAVE_CLK
+	select CLKDEV_LOOKUP
 	select CPU_V7
 	select ARM_L1_CACHE_SHIFT_6
 	select ARCH_USES_GETTIMEOFFSET
@@ -755,6 +760,8 @@ config ARCH_S5PV210
 	select ARCH_SPARSEMEM_ENABLE
 	select GENERIC_GPIO
 	select HAVE_CLK
+	select CLKDEV_LOOKUP
+	select CLKSRC_MMIO
 	select ARM_L1_CACHE_SHIFT_6
 	select ARCH_HAS_CPUFREQ
 	select GENERIC_CLOCKEVENTS
@@ -771,6 +778,7 @@ config ARCH_EXYNOS4
 	select ARCH_SPARSEMEM_ENABLE
 	select GENERIC_GPIO
 	select HAVE_CLK
+	select CLKDEV_LOOKUP
 	select ARCH_HAS_CPUFREQ
 	select GENERIC_CLOCKEVENTS
 	select HAVE_S3C_RTC if RTC_CLASS
@@ -856,6 +864,7 @@ config ARCH_OMAP
 	select HAVE_CLK
 	select ARCH_REQUIRE_GPIOLIB
 	select ARCH_HAS_CPUFREQ
+	select CLKSRC_MMIO
 	select GENERIC_CLOCKEVENTS
 	select HAVE_SCHED_CLOCK
 	select ARCH_HAS_HOLES_MEMORYMODEL

arch/arm/configs/cm_x300_defconfig

@@ -5,7 +5,6 @@ CONFIG_SYSVIPC=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=18
-CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_MODULES=y
@@ -13,6 +12,7 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_ARCH_PXA=y
+CONFIG_GPIO_PCA953X=y
 CONFIG_MACH_CM_X300=y
 CONFIG_NO_HZ=y
 CONFIG_AEABI=y
@@ -23,7 +23,6 @@ CONFIG_CMDLINE="root=/dev/mtdblock5 rootfstype=ubifs console=ttyS2,38400"
 CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
 CONFIG_FPE_NWFPE=y
-CONFIG_PM=y
 CONFIG_APM_EMULATION=y
 CONFIG_NET=y
 CONFIG_PACKET=y
@@ -40,8 +39,8 @@ CONFIG_IP_PNP_RARP=y
 # CONFIG_INET_DIAG is not set
 # CONFIG_IPV6 is not set
 CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
+CONFIG_BT_L2CAP=y
+CONFIG_BT_SCO=y
 CONFIG_BT_RFCOMM=m
 CONFIG_BT_RFCOMM_TTY=y
 CONFIG_BT_BNEP=m
@@ -60,7 +59,6 @@ CONFIG_MTD_NAND_PXA3xx=y
 CONFIG_MTD_UBI=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
-# CONFIG_MISC_DEVICES is not set
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_NETDEVICES=y
@@ -81,16 +79,15 @@ CONFIG_TOUCHSCREEN_WM97XX=m
 # CONFIG_TOUCHSCREEN_WM9705 is not set
 # CONFIG_TOUCHSCREEN_WM9713 is not set
 # CONFIG_SERIO is not set
+# CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
 # CONFIG_HW_RANDOM is not set
 CONFIG_I2C=y
 CONFIG_I2C_PXA=y
 CONFIG_SPI=y
 CONFIG_SPI_GPIO=y
 CONFIG_GPIO_SYSFS=y
-CONFIG_GPIO_PCA953X=y
 # CONFIG_HWMON is not set
 CONFIG_PMIC_DA903X=y
 CONFIG_REGULATOR=y
@@ -102,7 +99,6 @@ CONFIG_LCD_CLASS_DEVICE=y
 CONFIG_LCD_TDO24M=y
 # CONFIG_BACKLIGHT_GENERIC is not set
 CONFIG_BACKLIGHT_DA903X=m
-# CONFIG_VGA_CONSOLE is not set
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
 CONFIG_FONTS=y
@@ -131,7 +127,6 @@ CONFIG_HID_GREENASIA=y
 CONFIG_HID_SMARTJOYPLUS=y
 CONFIG_HID_TOPSEED=y
 CONFIG_HID_THRUSTMASTER=y
-CONFIG_HID_WACOM=m
 CONFIG_HID_ZEROPLUS=y
 CONFIG_USB=y
 CONFIG_USB_DEVICEFS=y
@@ -152,7 +147,6 @@ CONFIG_RTC_DRV_PXA=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
-CONFIG_INOTIFY=y
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
 CONFIG_TMPFS=y
@@ -164,7 +158,6 @@ CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
-CONFIG_SMB_FS=m
 CONFIG_CIFS=m
 CONFIG_CIFS_WEAK_PW_HASH=y
 CONFIG_PARTITION_ADVANCED=y
@@ -172,9 +165,7 @@ CONFIG_NLS_CODEPAGE_437=m
 CONFIG_NLS_ISO8859_1=m
 CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DETECT_SOFTLOCKUP is not set
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_FTRACE is not set
 CONFIG_DEBUG_USER=y
@@ -182,7 +173,6 @@ CONFIG_DEBUG_LL=y
 CONFIG_CRYPTO_ECB=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_ARC4=m
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
 CONFIG_CRC_T10DIF=y

arch/arm/include/asm/hardware/scoop.h

@@ -61,7 +61,6 @@ struct scoop_pcmcia_dev {
 struct scoop_pcmcia_config {
 	struct scoop_pcmcia_dev *devs;
 	int num_devs;
-	void (*pcmcia_init)(void);
 	void (*power_ctrl)(struct device *scoop, unsigned short cpr, int nr);
 };
 

arch/arm/mach-davinci/board-dm646x-evm.c

@@ -719,9 +719,15 @@ static void __init cdce_clk_init(void)
 	}
 }
 
+#define DM6467T_EVM_REF_FREQ		33000000
+
 static void __init davinci_map_io(void)
 {
 	dm646x_init();
+
+	if (machine_is_davinci_dm6467tevm())
+		davinci_set_refclk_rate(DM6467T_EVM_REF_FREQ);
+
 	cdce_clk_init();
 }
 
@@ -785,17 +791,6 @@ static __init void evm_init(void)
 	soc_info->emac_pdata->phy_id = DM646X_EVM_PHY_ID;
 }
 
-#define DM646X_EVM_REF_FREQ		27000000
-#define DM6467T_EVM_REF_FREQ		33000000
-
-void __init dm646x_board_setup_refclk(struct clk *clk)
-{
-	if (machine_is_davinci_dm6467tevm())
-		clk->rate = DM6467T_EVM_REF_FREQ;
-	else
-		clk->rate = DM646X_EVM_REF_FREQ;
-}
-
 MACHINE_START(DAVINCI_DM6467_EVM, "DaVinci DM646x EVM")
 	.boot_params  = (0x80000100),
 	.map_io       = davinci_map_io,

arch/arm/mach-davinci/clock.c

@@ -368,6 +368,12 @@ static unsigned long clk_leafclk_recalc(struct clk *clk)
 	return clk->parent->rate;
 }
 
+int davinci_simple_set_rate(struct clk *clk, unsigned long rate)
+{
+	clk->rate = rate;
+	return 0;
+}
+
 static unsigned long clk_pllclk_recalc(struct clk *clk)
 {
 	u32 ctrl, mult = 1, prediv = 1, postdiv = 1;
@@ -506,6 +512,38 @@ int davinci_set_pllrate(struct pll_data *pll, unsigned int prediv,
 }
 EXPORT_SYMBOL(davinci_set_pllrate);
 
+/**
+ * davinci_set_refclk_rate() - Set the reference clock rate
+ * @rate:	The new rate.
+ *
+ * Sets the reference clock rate to a given value. This will most likely
+ * result in the entire clock tree getting updated.
+ *
+ * This is used to support boards which use a reference clock different
+ * than that used by default in <soc>.c file. The reference clock rate
+ * should be updated early in the boot process; ideally soon after the
+ * clock tree has been initialized once with the default reference clock
+ * rate (davinci_common_init()).
+ *
+ * Returns 0 on success, error otherwise.
+ */
+int davinci_set_refclk_rate(unsigned long rate)
+{
+	struct clk *refclk;
+
+	refclk = clk_get(NULL, "ref");
+	if (IS_ERR(refclk)) {
+		pr_err("%s: failed to get reference clock.\n", __func__);
+		return PTR_ERR(refclk);
+	}
+
+	clk_set_rate(refclk, rate);
+
+	clk_put(refclk);
+
+	return 0;
+}
+
 int __init davinci_clk_init(struct clk_lookup *clocks)
   {
 	struct clk_lookup *c;

arch/arm/mach-davinci/clock.h

@@ -123,6 +123,8 @@ int davinci_clk_init(struct clk_lookup *clocks);
 int davinci_set_pllrate(struct pll_data *pll, unsigned int prediv,
 				unsigned int mult, unsigned int postdiv);
 int davinci_set_sysclk_rate(struct clk *clk, unsigned long rate);
+int davinci_set_refclk_rate(unsigned long rate);
+int davinci_simple_set_rate(struct clk *clk, unsigned long rate);
 
 extern struct platform_device davinci_wdt_device;
 extern void davinci_watchdog_reset(struct platform_device *);

arch/arm/mach-davinci/dm646x.c

@@ -43,6 +43,7 @@
 /*
  * Device specific clocks
  */
+#define DM646X_REF_FREQ		27000000
 #define DM646X_AUX_FREQ		24000000
 
 static struct pll_data pll1_data = {
@@ -57,6 +58,8 @@ static struct pll_data pll2_data = {
 
 static struct clk ref_clk = {
 	.name = "ref_clk",
+	.rate = DM646X_REF_FREQ,
+	.set_rate = davinci_simple_set_rate,
 };
 
 static struct clk aux_clkin = {
@@ -902,7 +905,6 @@ int __init dm646x_init_edma(struct edma_rsv_info *rsv)
 
 void __init dm646x_init(void)
 {
-	dm646x_board_setup_refclk(&ref_clk);
 	davinci_common_init(&davinci_soc_info_dm646x);
 }
 

arch/arm/mach-davinci/include/mach/dm646x.h

@@ -15,7 +15,6 @@
 #include <mach/asp.h>
 #include <linux/i2c.h>
 #include <linux/videodev2.h>
-#include <linux/clk.h>
 #include <linux/davinci_emac.h>
 
 #define DM646X_EMAC_BASE		(0x01C80000)
@@ -31,7 +30,6 @@
 void __init dm646x_init(void);
 void __init dm646x_init_mcasp0(struct snd_platform_data *pdata);
 void __init dm646x_init_mcasp1(struct snd_platform_data *pdata);
-void __init dm646x_board_setup_refclk(struct clk *clk);
 int __init dm646x_init_edma(struct edma_rsv_info *rsv);
 
 void dm646x_video_init(void);

arch/arm/mach-davinci/include/mach/psc.h

@@ -30,47 +30,47 @@
 #define	DAVINCI_PWR_SLEEP_CNTRL_BASE	0x01C41000
 
 /* Power and Sleep Controller (PSC) Domains */
-#define DAVINCI_GPSC_ARMDOMAIN      0
-#define DAVINCI_GPSC_DSPDOMAIN      1
+#define DAVINCI_GPSC_ARMDOMAIN		0
+#define DAVINCI_GPSC_DSPDOMAIN		1
 
-#define DAVINCI_LPSC_VPSSMSTR       0
-#define DAVINCI_LPSC_VPSSSLV        1
-#define DAVINCI_LPSC_TPCC           2
-#define DAVINCI_LPSC_TPTC0          3
-#define DAVINCI_LPSC_TPTC1          4
-#define DAVINCI_LPSC_EMAC           5
-#define DAVINCI_LPSC_EMAC_WRAPPER   6
-#define DAVINCI_LPSC_USB            9
-#define DAVINCI_LPSC_ATA            10
-#define DAVINCI_LPSC_VLYNQ          11
-#define DAVINCI_LPSC_UHPI           12
-#define DAVINCI_LPSC_DDR_EMIF       13
-#define DAVINCI_LPSC_AEMIF          14
-#define DAVINCI_LPSC_MMC_SD         15
-#define DAVINCI_LPSC_McBSP          17
-#define DAVINCI_LPSC_I2C            18
-#define DAVINCI_LPSC_UART0          19
-#define DAVINCI_LPSC_UART1          20
-#define DAVINCI_LPSC_UART2          21
-#define DAVINCI_LPSC_SPI            22
-#define DAVINCI_LPSC_PWM0           23
-#define DAVINCI_LPSC_PWM1           24
-#define DAVINCI_LPSC_PWM2           25
-#define DAVINCI_LPSC_GPIO           26
-#define DAVINCI_LPSC_TIMER0         27
-#define DAVINCI_LPSC_TIMER1         28
-#define DAVINCI_LPSC_TIMER2         29
-#define DAVINCI_LPSC_SYSTEM_SUBSYS  30
-#define DAVINCI_LPSC_ARM            31
-#define DAVINCI_LPSC_SCR2           32
-#define DAVINCI_LPSC_SCR3           33
-#define DAVINCI_LPSC_SCR4           34
-#define DAVINCI_LPSC_CROSSBAR       35
-#define DAVINCI_LPSC_CFG27          36
-#define DAVINCI_LPSC_CFG3           37
-#define DAVINCI_LPSC_CFG5           38
-#define DAVINCI_LPSC_GEM            39
-#define DAVINCI_LPSC_IMCOP          40
+#define DAVINCI_LPSC_VPSSMSTR		0
+#define DAVINCI_LPSC_VPSSSLV		1
+#define DAVINCI_LPSC_TPCC		2
+#define DAVINCI_LPSC_TPTC0		3
+#define DAVINCI_LPSC_TPTC1		4
+#define DAVINCI_LPSC_EMAC		5
+#define DAVINCI_LPSC_EMAC_WRAPPER	6
+#define DAVINCI_LPSC_USB		9
+#define DAVINCI_LPSC_ATA		10
+#define DAVINCI_LPSC_VLYNQ		11
+#define DAVINCI_LPSC_UHPI		12
+#define DAVINCI_LPSC_DDR_EMIF		13
+#define DAVINCI_LPSC_AEMIF		14
+#define DAVINCI_LPSC_MMC_SD		15
+#define DAVINCI_LPSC_McBSP		17
+#define DAVINCI_LPSC_I2C		18
+#define DAVINCI_LPSC_UART0		19
+#define DAVINCI_LPSC_UART1		20
+#define DAVINCI_LPSC_UART2		21
+#define DAVINCI_LPSC_SPI		22
+#define DAVINCI_LPSC_PWM0		23
+#define DAVINCI_LPSC_PWM1		24
+#define DAVINCI_LPSC_PWM2		25
+#define DAVINCI_LPSC_GPIO		26
+#define DAVINCI_LPSC_TIMER0		27
+#define DAVINCI_LPSC_TIMER1		28
+#define DAVINCI_LPSC_TIMER2		29
+#define DAVINCI_LPSC_SYSTEM_SUBSYS	30
+#define DAVINCI_LPSC_ARM		31
+#define DAVINCI_LPSC_SCR2		32
+#define DAVINCI_LPSC_SCR3		33
+#define DAVINCI_LPSC_SCR4		34
+#define DAVINCI_LPSC_CROSSBAR		35
+#define DAVINCI_LPSC_CFG27		36
+#define DAVINCI_LPSC_CFG3		37
+#define DAVINCI_LPSC_CFG5		38
+#define DAVINCI_LPSC_GEM		39
+#define DAVINCI_LPSC_IMCOP		40
 
 #define DM355_LPSC_TIMER3		5
 #define DM355_LPSC_SPI1			6
@@ -102,39 +102,39 @@
 /*
  * LPSC Assignments
  */
-#define DM646X_LPSC_ARM            0
-#define DM646X_LPSC_C64X_CPU       1
-#define DM646X_LPSC_HDVICP0        2
-#define DM646X_LPSC_HDVICP1        3
-#define DM646X_LPSC_TPCC           4
-#define DM646X_LPSC_TPTC0          5
-#define DM646X_LPSC_TPTC1          6
-#define DM646X_LPSC_TPTC2          7
-#define DM646X_LPSC_TPTC3          8
-#define DM646X_LPSC_PCI            13
-#define DM646X_LPSC_EMAC           14
-#define DM646X_LPSC_VDCE           15
-#define DM646X_LPSC_VPSSMSTR       16
-#define DM646X_LPSC_VPSSSLV        17
-#define DM646X_LPSC_TSIF0          18
-#define DM646X_LPSC_TSIF1          19
-#define DM646X_LPSC_DDR_EMIF       20
-#define DM646X_LPSC_AEMIF          21
-#define DM646X_LPSC_McASP0         22
-#define DM646X_LPSC_McASP1         23
-#define DM646X_LPSC_CRGEN0         24
-#define DM646X_LPSC_CRGEN1         25
-#define DM646X_LPSC_UART0          26
-#define DM646X_LPSC_UART1          27
-#define DM646X_LPSC_UART2          28
-#define DM646X_LPSC_PWM0           29
-#define DM646X_LPSC_PWM1           30
-#define DM646X_LPSC_I2C            31
-#define DM646X_LPSC_SPI            32
-#define DM646X_LPSC_GPIO           33
-#define DM646X_LPSC_TIMER0         34
-#define DM646X_LPSC_TIMER1         35
-#define DM646X_LPSC_ARM_INTC       45
+#define DM646X_LPSC_ARM		0
+#define DM646X_LPSC_C64X_CPU	1
+#define DM646X_LPSC_HDVICP0	2
+#define DM646X_LPSC_HDVICP1	3
+#define DM646X_LPSC_TPCC	4
+#define DM646X_LPSC_TPTC0	5
+#define DM646X_LPSC_TPTC1	6
+#define DM646X_LPSC_TPTC2	7
+#define DM646X_LPSC_TPTC3	8
+#define DM646X_LPSC_PCI		13
+#define DM646X_LPSC_EMAC	14
+#define DM646X_LPSC_VDCE	15
+#define DM646X_LPSC_VPSSMSTR	16
+#define DM646X_LPSC_VPSSSLV	17
+#define DM646X_LPSC_TSIF0	18
+#define DM646X_LPSC_TSIF1	19
+#define DM646X_LPSC_DDR_EMIF	20
+#define DM646X_LPSC_AEMIF	21
+#define DM646X_LPSC_McASP0	22
+#define DM646X_LPSC_McASP1	23
+#define DM646X_LPSC_CRGEN0	24
+#define DM646X_LPSC_CRGEN1	25
+#define DM646X_LPSC_UART0	26
+#define DM646X_LPSC_UART1	27
+#define DM646X_LPSC_UART2	28
+#define DM646X_LPSC_PWM0	29
+#define DM646X_LPSC_PWM1	30
+#define DM646X_LPSC_I2C		31
+#define DM646X_LPSC_SPI		32
+#define DM646X_LPSC_GPIO	33
+#define DM646X_LPSC_TIMER0	34
+#define DM646X_LPSC_TIMER1	35
+#define DM646X_LPSC_ARM_INTC	45
 
 /* PSC0 defines */
 #define DA8XX_LPSC0_TPCC		0
@@ -243,7 +243,7 @@
 #define PSC_STATE_DISABLE	2
 #define PSC_STATE_ENABLE	3
 
-#define MDSTAT_STATE_MASK 0x1f
+#define MDSTAT_STATE_MASK	0x1f
 
 #ifndef __ASSEMBLER__
 

arch/arm/mach-exynos4/Kconfig

@@ -110,6 +110,8 @@ config MACH_SMDKC210
 	select S3C_DEV_HSMMC1
 	select S3C_DEV_HSMMC2
 	select S3C_DEV_HSMMC3
+	select SAMSUNG_DEV_PWM
+	select SAMSUNG_DEV_BACKLIGHT
 	select EXYNOS4_DEV_PD
 	select EXYNOS4_DEV_SYSMMU
 	select EXYNOS4_SETUP_I2C1
@@ -127,8 +129,10 @@ config MACH_SMDKV310
 	select S3C_DEV_HSMMC1
 	select S3C_DEV_HSMMC2
 	select S3C_DEV_HSMMC3
+	select SAMSUNG_DEV_BACKLIGHT
 	select SAMSUNG_DEV_KEYPAD
 	select EXYNOS4_DEV_PD
+	select SAMSUNG_DEV_PWM
 	select EXYNOS4_DEV_SYSMMU
 	select EXYNOS4_SETUP_I2C1
 	select EXYNOS4_SETUP_KEYPAD

arch/arm/mach-exynos4/clock.c

@@ -27,24 +27,20 @@
 
 static struct clk clk_sclk_hdmi27m = {
 	.name		= "sclk_hdmi27m",
-	.id		= -1,
 	.rate		= 27000000,
 };
 
 static struct clk clk_sclk_hdmiphy = {
 	.name		= "sclk_hdmiphy",
-	.id		= -1,
 };
 
 static struct clk clk_sclk_usbphy0 = {
 	.name		= "sclk_usbphy0",
-	.id		= -1,
 	.rate		= 27000000,
 };
 
 static struct clk clk_sclk_usbphy1 = {
 	.name		= "sclk_usbphy1",
-	.id		= -1,
 };
 
 static int exynos4_clksrc_mask_top_ctrl(struct clk *clk, int enable)
@@ -132,7 +128,6 @@ static int exynos4_clk_ip_perir_ctrl(struct clk *clk, int enable)
 static struct clksrc_clk clk_mout_apll = {
 	.clk	= {
 		.name		= "mout_apll",
-		.id		= -1,
 	},
 	.sources	= &clk_src_apll,
 	.reg_src	= { .reg = S5P_CLKSRC_CPU, .shift = 0, .size = 1 },
@@ -141,7 +136,6 @@ static struct clksrc_clk clk_mout_apll = {
 static struct clksrc_clk clk_sclk_apll = {
 	.clk	= {
 		.name		= "sclk_apll",
-		.id		= -1,
 		.parent		= &clk_mout_apll.clk,
 	},
 	.reg_div	= { .reg = S5P_CLKDIV_CPU, .shift = 24, .size = 3 },
@@ -150,7 +144,6 @@ static struct clksrc_clk clk_sclk_apll = {
 static struct clksrc_clk clk_mout_epll = {
 	.clk	= {
 		.name		= "mout_epll",
-		.id		= -1,
 	},
 	.sources	= &clk_src_epll,
 	.reg_src	= { .reg = S5P_CLKSRC_TOP0, .shift = 4, .size = 1 },
@@ -159,7 +152,6 @@ static struct clksrc_clk clk_mout_epll = {
 static struct clksrc_clk clk_mout_mpll = {
 	.clk = {
 		.name		= "mout_mpll",
-		.id		= -1,
 	},
 	.sources	= &clk_src_mpll,
 	.reg_src	= { .reg = S5P_CLKSRC_CPU, .shift = 8, .size = 1 },
@@ -178,7 +170,6 @@ static struct clksrc_sources clkset_moutcore = {
 static struct clksrc_clk clk_moutcore = {
 	.clk	= {
 		.name		= "moutcore",
-		.id		= -1,
 	},
 	.sources	= &clkset_moutcore,
 	.reg_src	= { .reg = S5P_CLKSRC_CPU, .shift = 16, .size = 1 },
@@ -187,7 +178,6 @@ static struct clksrc_clk clk_moutcore = {
 static struct clksrc_clk clk_coreclk = {
 	.clk	= {
 		.name		= "core_clk",
-		.id		= -1,
 		.parent		= &clk_moutcore.clk,
 	},
 	.reg_div	= { .reg = S5P_CLKDIV_CPU, .shift = 0, .size = 3 },
@@ -196,7 +186,6 @@ static struct clksrc_clk clk_coreclk = {
 static struct clksrc_clk clk_armclk = {
 	.clk	= {
 		.name		= "armclk",
-		.id		= -1,
 		.parent		= &clk_coreclk.clk,
 	},
 };
@@ -204,7 +193,6 @@ static struct clksrc_clk clk_armclk = {
 static struct clksrc_clk clk_aclk_corem0 = {
 	.clk	= {
 		.name		= "aclk_corem0",
-		.id		= -1,
 		.parent		= &clk_coreclk.clk,
 	},
 	.reg_div	= { .reg = S5P_CLKDIV_CPU, .shift = 4, .size = 3 },
@@ -213,7 +201,6 @@ static struct clksrc_clk clk_aclk_corem0 = {
 static struct clksrc_clk clk_aclk_cores = {
 	.clk	= {
 		.name		= "aclk_cores",
-		.id		= -1,
 		.parent		= &clk_coreclk.clk,
 	},
 	.reg_div	= { .reg = S5P_CLKDIV_CPU, .shift = 4, .size = 3 },
@@ -222,7 +209,6 @@ static struct clksrc_clk clk_aclk_cores = {
 static struct clksrc_clk clk_aclk_corem1 = {
 	.clk	= {
 		.name		= "aclk_corem1",
-		.id		= -1,
 		.parent		= &clk_coreclk.clk,
 	},
 	.reg_div	= { .reg = S5P_CLKDIV_CPU, .shift = 8, .size = 3 },
@@ -231,7 +217,6 @@ static struct clksrc_clk clk_aclk_corem1 = {
 static struct clksrc_clk clk_periphclk = {
 	.clk	= {
 		.name		= "periphclk",
-		.id		= -1,
 		.parent		= &clk_coreclk.clk,
 	},
 	.reg_div	= { .reg = S5P_CLKDIV_CPU, .shift = 12, .size = 3 },
@@ -252,7 +237,6 @@ static struct clksrc_sources clkset_mout_corebus = {
 static struct clksrc_clk clk_mout_corebus = {
 	.clk	= {
 		.name		= "mout_corebus",
-		.id		= -1,
 	},
 	.sources	= &clkset_mout_corebus,
 	.reg_src	= { .reg = S5P_CLKSRC_DMC, .shift = 4, .size = 1 },
@@ -261,7 +245,6 @@ static struct clksrc_clk clk_mout_corebus = {
 static struct clksrc_clk clk_sclk_dmc = {
 	.clk	= {
 		.name		= "sclk_dmc",
-		.id		= -1,
 		.parent		= &clk_mout_corebus.clk,
 	},
 	.reg_div	= { .reg = S5P_CLKDIV_DMC0, .shift = 12, .size = 3 },
@@ -270,7 +253,6 @@ static struct clksrc_clk clk_sclk_dmc = {
 static struct clksrc_clk clk_aclk_cored = {
 	.clk	= {
 		.name		= "aclk_cored",
-		.id		= -1,
 		.parent		= &clk_sclk_dmc.clk,
 	},
 	.reg_div	= { .reg = S5P_CLKDIV_DMC0, .shift = 16, .size = 3 },
@@ -279,7 +261,6 @@ static struct clksrc_clk clk_aclk_cored = {
 static struct clksrc_clk clk_aclk_corep = {
 	.clk	= {
 		.name		= "aclk_corep",
-		.id		= -1,
 		.parent		= &clk_aclk_cored.clk,
 	},
 	.reg_div	= { .reg = S5P_CLKDIV_DMC0, .shift = 20, .size = 3 },
@@ -288,7 +269,6 @@ static struct clksrc_clk clk_aclk_corep = {
 static struct clksrc_clk clk_aclk_acp = {
 	.clk	= {
 		.name		= "aclk_acp",
-		.id		= -1,
 		.parent		= &clk_mout_corebus.clk,
 	},
 	.reg_div	= { .reg = S5P_CLKDIV_DMC0, .shift = 0, .size = 3 },
@@ -297,7 +277,6 @@ static struct clksrc_clk clk_aclk_acp = {
 static struct clksrc_clk clk_pclk_acp = {
 	.clk	= {
 		.name		= "pclk_acp",
-		.id		= -1,
 		.parent		= &clk_aclk_acp.clk,
 	},
 	.reg_div	= { .reg = S5P_CLKDIV_DMC0, .shift = 4, .size = 3 },
@@ -318,7 +297,6 @@ static struct clksrc_sources clkset_aclk = {
 static struct clksrc_clk clk_aclk_200 = {
 	.clk	= {
 		.name		= "aclk_200",
-		.id		= -1,
 	},
 	.sources	= &clkset_aclk,
 	.reg_src	= { .reg = S5P_CLKSRC_TOP0, .shift = 12, .size = 1 },
@@ -328,7 +306,6 @@ static struct clksrc_clk clk_aclk_200 = {
 static struct clksrc_clk clk_aclk_100 = {
 	.clk	= {
 		.name		= "aclk_100",
-		.id		= -1,
 	},
 	.sources	= &clkset_aclk,
 	.reg_src	= { .reg = S5P_CLKSRC_TOP0, .shift = 16, .size = 1 },
@@ -338,7 +315,6 @@ static struct clksrc_clk clk_aclk_100 = {
 static struct clksrc_clk clk_aclk_160 = {
 	.clk	= {
 		.name		= "aclk_160",
-		.id		= -1,
 	},
 	.sources	= &clkset_aclk,
 	.reg_src	= { .reg = S5P_CLKSRC_TOP0, .shift = 20, .size = 1 },
@@ -348,7 +324,6 @@ static struct clksrc_clk clk_aclk_160 = {
 static struct clksrc_clk clk_aclk_133 = {
 	.clk	= {
 		.name		= "aclk_133",
-		.id		= -1,
 	},
 	.sources	= &clkset_aclk,
 	.reg_src	= { .reg = S5P_CLKSRC_TOP0, .shift = 24, .size = 1 },
@@ -368,7 +343,6 @@ static struct clksrc_sources clkset_vpllsrc = {
 static struct clksrc_clk clk_vpllsrc = {
 	.clk	= {
 		.name		= "vpll_src",
-		.id		= -1,
 		.enable		= exynos4_clksrc_mask_top_ctrl,
 		.ctrlbit	= (1 << 0),
 	},
@@ -389,7 +363,6 @@ static struct clksrc_sources clkset_sclk_vpll = {
 static struct clksrc_clk clk_sclk_vpll = {
 	.clk	= {
 		.name		= "sclk_vpll",
-		.id		= -1,
 	},
 	.sources	= &clkset_sclk_vpll,
 	.reg_src	= { .reg = S5P_CLKSRC_TOP0, .shift = 8, .size = 1 },
@@ -398,161 +371,151 @@ static struct clksrc_clk clk_sclk_vpll = {
 static struct clk init_clocks_off[] = {
 	{
 		.name		= "timers",
-		.id		= -1,
 		.parent		= &clk_aclk_100.clk,
 		.enable		= exynos4_clk_ip_peril_ctrl,
 		.ctrlbit	= (1<<24),
 	}, {
 		.name		= "csis",
-		.id		= 0,
+		.devname	= "s5p-mipi-csis.0",
 		.enable		= exynos4_clk_ip_cam_ctrl,
 		.ctrlbit	= (1 << 4),
 	}, {
 		.name		= "csis",
-		.id		= 1,
+		.devname	= "s5p-mipi-csis.1",
 		.enable		= exynos4_clk_ip_cam_ctrl,
 		.ctrlbit	= (1 << 5),
 	}, {
 		.name		= "fimc",
-		.id		= 0,
+		.devname	= "exynos4-fimc.0",
 		.enable		= exynos4_clk_ip_cam_ctrl,
 		.ctrlbit	= (1 << 0),
 	}, {
 		.name		= "fimc",
-		.id		= 1,
+		.devname	= "exynos4-fimc.1",
 		.enable		= exynos4_clk_ip_cam_ctrl,
 		.ctrlbit	= (1 << 1),
 	}, {
 		.name		= "fimc",
-		.id		= 2,
+		.devname	= "exynos4-fimc.2",
 		.enable		= exynos4_clk_ip_cam_ctrl,
 		.ctrlbit	= (1 << 2),
 	}, {
 		.name		= "fimc",
-		.id		= 3,
+		.devname	= "exynos4-fimc.3",
 		.enable		= exynos4_clk_ip_cam_ctrl,
 		.ctrlbit	= (1 << 3),
 	}, {
 		.name		= "fimd",
-		.id		= 0,
+		.devname	= "exynos4-fb.0",
 		.enable		= exynos4_clk_ip_lcd0_ctrl,
 		.ctrlbit	= (1 << 0),
 	}, {
 		.name		= "fimd",
-		.id		= 1,
+		.devname	= "exynos4-fb.1",
 		.enable		= exynos4_clk_ip_lcd1_ctrl,
 		.ctrlbit	= (1 << 0),
 	}, {
 		.name		= "sataphy",
-		.id		= -1,
 		.parent		= &clk_aclk_133.clk,
 		.enable		= exynos4_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 3),
 	}, {
 		.name		= "hsmmc",
-		.id		= 0,
+		.devname	= "s3c-sdhci.0",
 		.parent		= &clk_aclk_133.clk,
 		.enable		= exynos4_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 5),
 	}, {
 		.name		= "hsmmc",
-		.id		= 1,
+		.devname	= "s3c-sdhci.1",
 		.parent		= &clk_aclk_133.clk,
 		.enable		= exynos4_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 6),
 	}, {
 		.name		= "hsmmc",
-		.id		= 2,
+		.devname	= "s3c-sdhci.2",
 		.parent		= &clk_aclk_133.clk,
 		.enable		= exynos4_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 7),
 	}, {
 		.name		= "hsmmc",
-		.id		= 3,
+		.devname	= "s3c-sdhci.3",
 		.parent		= &clk_aclk_133.clk,
 		.enable		= exynos4_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 8),
 	}, {
-		.name		= "hsmmc",
-		.id		= 4,
+		.name		= "dwmmc",
 		.parent		= &clk_aclk_133.clk,
 		.enable		= exynos4_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 9),
 	}, {
 		.name		= "sata",
-		.id		= -1,
 		.parent		= &clk_aclk_133.clk,
 		.enable		= exynos4_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 10),
 	}, {
 		.name		= "pdma",
-		.id		= 0,
+		.devname	= "s3c-pl330.0",
 		.enable		= exynos4_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 0),
 	}, {
 		.name		= "pdma",
-		.id		= 1,
+		.devname	= "s3c-pl330.1",
 		.enable		= exynos4_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 1),
 	}, {
 		.name		= "adc",
-		.id		= -1,
 		.enable		= exynos4_clk_ip_peril_ctrl,
 		.ctrlbit	= (1 << 15),
 	}, {
 		.name		= "keypad",
-		.id		= -1,
 		.enable		= exynos4_clk_ip_perir_ctrl,
 		.ctrlbit	= (1 << 16),
 	}, {
 		.name		= "rtc",
-		.id		= -1,
 		.enable		= exynos4_clk_ip_perir_ctrl,
 		.ctrlbit	= (1 << 15),
 	}, {
 		.name		= "watchdog",
-		.id		= -1,
 		.parent		= &clk_aclk_100.clk,
 		.enable		= exynos4_clk_ip_perir_ctrl,
 		.ctrlbit	= (1 << 14),
 	}, {
 		.name		= "usbhost",
-		.id		= -1,
 		.enable		= exynos4_clk_ip_fsys_ctrl ,
 		.ctrlbit	= (1 << 12),
 	}, {
 		.name		= "otg",
-		.id		= -1,
 		.enable		= exynos4_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 13),
 	}, {
 		.name		= "spi",
-		.id		= 0,
+		.devname	= "s3c64xx-spi.0",
 		.enable		= exynos4_clk_ip_peril_ctrl,
 		.ctrlbit	= (1 << 16),
 	}, {
 		.name		= "spi",
-		.id		= 1,
+		.devname	= "s3c64xx-spi.1",
 		.enable		= exynos4_clk_ip_peril_ctrl,
 		.ctrlbit	= (1 << 17),
 	}, {
 		.name		= "spi",
-		.id		= 2,
+		.devname	= "s3c64xx-spi.2",
 		.enable		= exynos4_clk_ip_peril_ctrl,
 		.ctrlbit	= (1 << 18),
 	}, {
 		.name		= "iis",
-		.id		= 0,
+		.devname	= "samsung-i2s.0",
 		.enable		= exynos4_clk_ip_peril_ctrl,
 		.ctrlbit	= (1 << 19),
 	}, {
 		.name		= "iis",
-		.id		= 1,
+		.devname	= "samsung-i2s.1",
 		.enable		= exynos4_clk_ip_peril_ctrl,
 		.ctrlbit	= (1 << 20),
 	}, {
 		.name		= "iis",
-		.id		= 2,
+		.devname	= "samsung-i2s.2",
 		.enable		= exynos4_clk_ip_peril_ctrl,
 		.ctrlbit	= (1 << 21),
 	}, {
@@ -562,125 +525,110 @@ static struct clk init_clocks_off[] = {
 		.ctrlbit	= (1 << 27),
 	}, {
 		.name		= "fimg2d",
-		.id		= -1,
 		.enable		= exynos4_clk_ip_image_ctrl,
 		.ctrlbit	= (1 << 0),
 	}, {
 		.name		= "i2c",
-		.id		= 0,
+		.devname	= "s3c2440-i2c.0",
 		.parent		= &clk_aclk_100.clk,
 		.enable		= exynos4_clk_ip_peril_ctrl,
 		.ctrlbit	= (1 << 6),
 	}, {
 		.name		= "i2c",
-		.id		= 1,
+		.devname	= "s3c2440-i2c.1",
 		.parent		= &clk_aclk_100.clk,
 		.enable		= exynos4_clk_ip_peril_ctrl,
 		.ctrlbit	= (1 << 7),
 	}, {
 		.name		= "i2c",
-		.id		= 2,
+		.devname	= "s3c2440-i2c.2",
 		.parent		= &clk_aclk_100.clk,
 		.enable		= exynos4_clk_ip_peril_ctrl,
 		.ctrlbit	= (1 << 8),
 	}, {
 		.name		= "i2c",
-		.id		= 3,
+		.devname	= "s3c2440-i2c.3",
 		.parent		= &clk_aclk_100.clk,
 		.enable		= exynos4_clk_ip_peril_ctrl,
 		.ctrlbit	= (1 << 9),
 	}, {
 		.name		= "i2c",
-		.id		= 4,
+		.devname	= "s3c2440-i2c.4",
 		.parent		= &clk_aclk_100.clk,
 		.enable		= exynos4_clk_ip_peril_ctrl,
 		.ctrlbit	= (1 << 10),
 	}, {
 		.name		= "i2c",
-		.id		= 5,
+		.devname	= "s3c2440-i2c.5",
 		.parent		= &clk_aclk_100.clk,
 		.enable		= exynos4_clk_ip_peril_ctrl,
 		.ctrlbit	= (1 << 11),
 	}, {
 		.name		= "i2c",
-		.id		= 6,
+		.devname	= "s3c2440-i2c.6",
 		.parent		= &clk_aclk_100.clk,
 		.enable		= exynos4_clk_ip_peril_ctrl,
 		.ctrlbit	= (1 << 12),
 	}, {
 		.name		= "i2c",
-		.id		= 7,
+		.devname	= "s3c2440-i2c.7",
 		.parent		= &clk_aclk_100.clk,
 		.enable		= exynos4_clk_ip_peril_ctrl,
 		.ctrlbit	= (1 << 13),
 	}, {
 		.name		= "SYSMMU_MDMA",
-		.id		= -1,
 		.enable		= exynos4_clk_ip_image_ctrl,
 		.ctrlbit	= (1 << 5),
 	}, {
 		.name		= "SYSMMU_FIMC0",
-		.id		= -1,
 		.enable		= exynos4_clk_ip_cam_ctrl,
 		.ctrlbit	= (1 << 7),
 	}, {
 		.name		= "SYSMMU_FIMC1",
-		.id		= -1,
 		.enable		= exynos4_clk_ip_cam_ctrl,
 		.ctrlbit	= (1 << 8),
 	}, {
 		.name		= "SYSMMU_FIMC2",
-		.id		= -1,
 		.enable		= exynos4_clk_ip_cam_ctrl,
 		.ctrlbit	= (1 << 9),
 	}, {
 		.name		= "SYSMMU_FIMC3",
-		.id		= -1,
 		.enable		= exynos4_clk_ip_cam_ctrl,
 		.ctrlbit	= (1 << 10),
 	}, {
 		.name		= "SYSMMU_JPEG",
-		.id		= -1,
 		.enable		= exynos4_clk_ip_cam_ctrl,
 		.ctrlbit	= (1 << 11),
 	}, {
 		.name		= "SYSMMU_FIMD0",
-		.id		= -1,
 		.enable		= exynos4_clk_ip_lcd0_ctrl,
 		.ctrlbit	= (1 << 4),
 	}, {
 		.name		= "SYSMMU_FIMD1",
-		.id		= -1,
 		.enable		= exynos4_clk_ip_lcd1_ctrl,
 		.ctrlbit	= (1 << 4),
 	}, {
 		.name		= "SYSMMU_PCIe",
-		.id		= -1,
 		.enable		= exynos4_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 18),
 	}, {
 		.name		= "SYSMMU_G2D",
-		.id		= -1,
 		.enable		= exynos4_clk_ip_image_ctrl,
 		.ctrlbit	= (1 << 3),
 	}, {
 		.name		= "SYSMMU_ROTATOR",
-		.id		= -1,
 		.enable		= exynos4_clk_ip_image_ctrl,
 		.ctrlbit	= (1 << 4),
 	}, {
 		.name		= "SYSMMU_TV",
-		.id		= -1,
 		.enable		= exynos4_clk_ip_tv_ctrl,
 		.ctrlbit	= (1 << 4),
 	}, {
 		.name		= "SYSMMU_MFC_L",
-		.id		= -1,
 		.enable		= exynos4_clk_ip_mfc_ctrl,
 		.ctrlbit	= (1 << 1),
 	}, {
 		.name		= "SYSMMU_MFC_R",
-		.id		= -1,
 		.enable		= exynos4_clk_ip_mfc_ctrl,
 		.ctrlbit	= (1 << 2),
 	}
@@ -689,32 +637,32 @@ static struct clk init_clocks_off[] = {
 static struct clk init_clocks[] = {
 	{
 		.name		= "uart",
-		.id		= 0,
+		.devname	= "s5pv210-uart.0",
 		.enable		= exynos4_clk_ip_peril_ctrl,
 		.ctrlbit	= (1 << 0),
 	}, {
 		.name		= "uart",
-		.id		= 1,
+		.devname	= "s5pv210-uart.1",
 		.enable		= exynos4_clk_ip_peril_ctrl,
 		.ctrlbit	= (1 << 1),
 	}, {
 		.name		= "uart",
-		.id		= 2,
+		.devname	= "s5pv210-uart.2",
 		.enable		= exynos4_clk_ip_peril_ctrl,
 		.ctrlbit	= (1 << 2),
 	}, {
 		.name		= "uart",
-		.id		= 3,
+		.devname	= "s5pv210-uart.3",
 		.enable		= exynos4_clk_ip_peril_ctrl,
 		.ctrlbit	= (1 << 3),
 	}, {
 		.name		= "uart",
-		.id		= 4,
+		.devname	= "s5pv210-uart.4",
 		.enable		= exynos4_clk_ip_peril_ctrl,
 		.ctrlbit	= (1 << 4),
 	}, {
 		.name		= "uart",
-		.id		= 5,
+		.devname	= "s5pv210-uart.5",
 		.enable		= exynos4_clk_ip_peril_ctrl,
 		.ctrlbit	= (1 << 5),
 	}
@@ -750,7 +698,6 @@ static struct clksrc_sources clkset_mout_g2d0 = {
 static struct clksrc_clk clk_mout_g2d0 = {
 	.clk	= {
 		.name		= "mout_g2d0",
-		.id		= -1,
 	},
 	.sources	= &clkset_mout_g2d0,
 	.reg_src	= { .reg = S5P_CLKSRC_IMAGE, .shift = 0, .size = 1 },
@@ -769,7 +716,6 @@ static struct clksrc_sources clkset_mout_g2d1 = {
 static struct clksrc_clk clk_mout_g2d1 = {
 	.clk	= {
 		.name		= "mout_g2d1",
-		.id		= -1,
 	},
 	.sources	= &clkset_mout_g2d1,
 	.reg_src	= { .reg = S5P_CLKSRC_IMAGE, .shift = 4, .size = 1 },
@@ -788,7 +734,6 @@ static struct clksrc_sources clkset_mout_g2d = {
 static struct clksrc_clk clk_dout_mmc0 = {
 	.clk		= {
 		.name		= "dout_mmc0",
-		.id		= -1,
 	},
 	.sources = &clkset_group,
 	.reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 0, .size = 4 },
@@ -798,7 +743,6 @@ static struct clksrc_clk clk_dout_mmc0 = {
 static struct clksrc_clk clk_dout_mmc1 = {
 	.clk		= {
 		.name		= "dout_mmc1",
-		.id		= -1,
 	},
 	.sources = &clkset_group,
 	.reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 4, .size = 4 },
@@ -808,7 +752,6 @@ static struct clksrc_clk clk_dout_mmc1 = {
 static struct clksrc_clk clk_dout_mmc2 = {
 	.clk		= {
 		.name		= "dout_mmc2",
-		.id		= -1,
 	},
 	.sources = &clkset_group,
 	.reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 8, .size = 4 },
@@ -818,7 +761,6 @@ static struct clksrc_clk clk_dout_mmc2 = {
 static struct clksrc_clk clk_dout_mmc3 = {
 	.clk		= {
 		.name		= "dout_mmc3",
-		.id		= -1,
 	},
 	.sources = &clkset_group,
 	.reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 12, .size = 4 },
@@ -828,7 +770,6 @@ static struct clksrc_clk clk_dout_mmc3 = {
 static struct clksrc_clk clk_dout_mmc4 = {
 	.clk		= {
 		.name		= "dout_mmc4",
-		.id		= -1,
 	},
 	.sources = &clkset_group,
 	.reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 16, .size = 4 },
@@ -839,7 +780,7 @@ static struct clksrc_clk clksrcs[] = {
 	{
 		.clk	= {
 			.name		= "uclk1",
-			.id		= 0,
+			.devname	= "s5pv210-uart.0",
 			.enable		= exynos4_clksrc_mask_peril0_ctrl,
 			.ctrlbit	= (1 << 0),
 		},
@@ -849,7 +790,7 @@ static struct clksrc_clk clksrcs[] = {
 	}, {
 		.clk		= {
 			.name		= "uclk1",
-			.id		= 1,
+			.devname	= "s5pv210-uart.1",
 			.enable		= exynos4_clksrc_mask_peril0_ctrl,
 			.ctrlbit	= (1 << 4),
 		},
@@ -859,7 +800,7 @@ static struct clksrc_clk clksrcs[] = {
 	}, {
 		.clk		= {
 			.name		= "uclk1",
-			.id		= 2,
+			.devname	= "s5pv210-uart.2",
 			.enable		= exynos4_clksrc_mask_peril0_ctrl,
 			.ctrlbit	= (1 << 8),
 		},
@@ -869,7 +810,7 @@ static struct clksrc_clk clksrcs[] = {
 	}, {
 		.clk		= {
 			.name		= "uclk1",
-			.id		= 3,
+			.devname	= "s5pv210-uart.3",
 			.enable		= exynos4_clksrc_mask_peril0_ctrl,
 			.ctrlbit	= (1 << 12),
 		},
@@ -879,7 +820,6 @@ static struct clksrc_clk clksrcs[] = {
 	}, {
 		.clk		= {
 			.name		= "sclk_pwm",
-			.id		= -1,
 			.enable		= exynos4_clksrc_mask_peril0_ctrl,
 			.ctrlbit	= (1 << 24),
 		},
@@ -889,7 +829,7 @@ static struct clksrc_clk clksrcs[] = {
 	}, {
 		.clk		= {
 			.name		= "sclk_csis",
-			.id		= 0,
+			.devname	= "s5p-mipi-csis.0",
 			.enable		= exynos4_clksrc_mask_cam_ctrl,
 			.ctrlbit	= (1 << 24),
 		},
@@ -899,7 +839,7 @@ static struct clksrc_clk clksrcs[] = {
 	}, {
 		.clk		= {
 			.name		= "sclk_csis",
-			.id		= 1,
+			.devname	= "s5p-mipi-csis.1",
 			.enable		= exynos4_clksrc_mask_cam_ctrl,
 			.ctrlbit	= (1 << 28),
 		},
@@ -909,7 +849,7 @@ static struct clksrc_clk clksrcs[] = {
 	}, {
 		.clk		= {
 			.name		= "sclk_cam",
-			.id		= 0,
+			.devname	= "exynos4-fimc.0",
 			.enable		= exynos4_clksrc_mask_cam_ctrl,
 			.ctrlbit	= (1 << 16),
 		},
@@ -919,7 +859,7 @@ static struct clksrc_clk clksrcs[] = {
 	}, {
 		.clk		= {
 			.name		= "sclk_cam",
-			.id		= 1,
+			.devname	= "exynos4-fimc.1",
 			.enable		= exynos4_clksrc_mask_cam_ctrl,
 			.ctrlbit	= (1 << 20),
 		},
@@ -929,7 +869,7 @@ static struct clksrc_clk clksrcs[] = {
 	}, {
 		.clk		= {
 			.name		= "sclk_fimc",
-			.id		= 0,
+			.devname	= "exynos4-fimc.0",
 			.enable		= exynos4_clksrc_mask_cam_ctrl,
 			.ctrlbit	= (1 << 0),
 		},
@@ -939,7 +879,7 @@ static struct clksrc_clk clksrcs[] = {
 	}, {
 		.clk		= {
 			.name		= "sclk_fimc",
-			.id		= 1,
+			.devname	= "exynos4-fimc.1",
 			.enable		= exynos4_clksrc_mask_cam_ctrl,
 			.ctrlbit	= (1 << 4),
 		},
@@ -949,7 +889,7 @@ static struct clksrc_clk clksrcs[] = {
 	}, {
 		.clk		= {
 			.name		= "sclk_fimc",
-			.id		= 2,
+			.devname	= "exynos4-fimc.2",
 			.enable		= exynos4_clksrc_mask_cam_ctrl,
 			.ctrlbit	= (1 << 8),
 		},
@@ -959,7 +899,7 @@ static struct clksrc_clk clksrcs[] = {
 	}, {
 		.clk		= {
 			.name		= "sclk_fimc",
-			.id		= 3,
+			.devname	= "exynos4-fimc.3",
 			.enable		= exynos4_clksrc_mask_cam_ctrl,
 			.ctrlbit	= (1 << 12),
 		},
@@ -969,7 +909,7 @@ static struct clksrc_clk clksrcs[] = {
 	}, {
 		.clk		= {
 			.name		= "sclk_fimd",
-			.id		= 0,
+			.devname	= "exynos4-fb.0",
 			.enable		= exynos4_clksrc_mask_lcd0_ctrl,
 			.ctrlbit	= (1 << 0),
 		},
@@ -979,7 +919,7 @@ static struct clksrc_clk clksrcs[] = {
 	}, {
 		.clk		= {
 			.name		= "sclk_fimd",
-			.id		= 1,
+			.devname	= "exynos4-fb.1",
 			.enable		= exynos4_clksrc_mask_lcd1_ctrl,
 			.ctrlbit	= (1 << 0),
 		},
@@ -989,7 +929,6 @@ static struct clksrc_clk clksrcs[] = {
 	}, {
 		.clk		= {
 			.name		= "sclk_sata",
-			.id		= -1,
 			.enable		= exynos4_clksrc_mask_fsys_ctrl,
 			.ctrlbit	= (1 << 24),
 		},
@@ -999,7 +938,7 @@ static struct clksrc_clk clksrcs[] = {
 	}, {
 		.clk		= {
 			.name		= "sclk_spi",
-			.id		= 0,
+			.devname	= "s3c64xx-spi.0",
 			.enable		= exynos4_clksrc_mask_peril1_ctrl,
 			.ctrlbit	= (1 << 16),
 		},
@@ -1009,7 +948,7 @@ static struct clksrc_clk clksrcs[] = {
 	}, {
 		.clk		= {
 			.name		= "sclk_spi",
-			.id		= 1,
+			.devname	= "s3c64xx-spi.1",
 			.enable		= exynos4_clksrc_mask_peril1_ctrl,
 			.ctrlbit	= (1 << 20),
 		},
@@ -1019,7 +958,7 @@ static struct clksrc_clk clksrcs[] = {
 	}, {
 		.clk		= {
 			.name		= "sclk_spi",
-			.id		= 2,
+			.devname	= "s3c64xx-spi.2",
 			.enable		= exynos4_clksrc_mask_peril1_ctrl,
 			.ctrlbit	= (1 << 24),
 		},
@@ -1029,7 +968,6 @@ static struct clksrc_clk clksrcs[] = {
 	}, {
 		.clk		= {
 			.name		= "sclk_fimg2d",
-			.id		= -1,
 		},
 		.sources = &clkset_mout_g2d,
 		.reg_src = { .reg = S5P_CLKSRC_IMAGE, .shift = 8, .size = 1 },
@@ -1037,7 +975,7 @@ static struct clksrc_clk clksrcs[] = {
 	}, {
 		.clk		= {
 			.name		= "sclk_mmc",
-			.id		= 0,
+			.devname	= "s3c-sdhci.0",
 			.parent		= &clk_dout_mmc0.clk,
 			.enable		= exynos4_clksrc_mask_fsys_ctrl,
 			.ctrlbit	= (1 << 0),
@@ -1046,7 +984,7 @@ static struct clksrc_clk clksrcs[] = {
 	}, {
 		.clk		= {
 			.name		= "sclk_mmc",
-			.id		= 1,
+			.devname	= "s3c-sdhci.1",
 			.parent         = &clk_dout_mmc1.clk,
 			.enable		= exynos4_clksrc_mask_fsys_ctrl,
 			.ctrlbit	= (1 << 4),
@@ -1055,7 +993,7 @@ static struct clksrc_clk clksrcs[] = {
 	}, {
 		.clk		= {
 			.name		= "sclk_mmc",
-			.id		= 2,
+			.devname	= "s3c-sdhci.2",
 			.parent         = &clk_dout_mmc2.clk,
 			.enable		= exynos4_clksrc_mask_fsys_ctrl,
 			.ctrlbit	= (1 << 8),
@@ -1064,7 +1002,7 @@ static struct clksrc_clk clksrcs[] = {
 	}, {
 		.clk		= {
 			.name		= "sclk_mmc",
-			.id		= 3,
+			.devname	= "s3c-sdhci.3",
 			.parent         = &clk_dout_mmc3.clk,
 			.enable		= exynos4_clksrc_mask_fsys_ctrl,
 			.ctrlbit	= (1 << 12),
@@ -1072,8 +1010,7 @@ static struct clksrc_clk clksrcs[] = {
 		.reg_div = { .reg = S5P_CLKDIV_FSYS2, .shift = 24, .size = 8 },
 	}, {
 		.clk		= {
-			.name		= "sclk_mmc",
-			.id		= 4,
+			.name		= "sclk_dwmmc",
 			.parent         = &clk_dout_mmc4.clk,
 			.enable		= exynos4_clksrc_mask_fsys_ctrl,
 			.ctrlbit	= (1 << 16),

arch/arm/mach-exynos4/include/mach/clkdev.h

@@ -0,0 +1,7 @@
+#ifndef __MACH_CLKDEV_H__
+#define __MACH_CLKDEV_H__
+
+#define __clk_get(clk) ({ 1; })
+#define __clk_put(clk) do {} while (0)
+
+#endif

arch/arm/mach-exynos4/mach-smdkc210.c

@@ -15,6 +15,7 @@
 #include <linux/smsc911x.h>
 #include <linux/io.h>
 #include <linux/i2c.h>
+#include <linux/pwm_backlight.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
@@ -27,6 +28,8 @@
 #include <plat/sdhci.h>
 #include <plat/iic.h>
 #include <plat/pd.h>
+#include <plat/gpio-cfg.h>
+#include <plat/backlight.h>
 
 #include <mach/map.h>
 
@@ -191,6 +194,17 @@ static void __init smdkc210_smsc911x_init(void)
 		     (0x1 << S5P_SROM_BCX__TACS__SHIFT), S5P_SROM_BC1);
 }
 
+/* LCD Backlight data */
+static struct samsung_bl_gpio_info smdkc210_bl_gpio_info = {
+	.no = EXYNOS4_GPD0(1),
+	.func = S3C_GPIO_SFN(2),
+};
+
+static struct platform_pwm_backlight_data smdkc210_bl_data = {
+	.pwm_id = 1,
+	.pwm_period_ns  = 1000,
+};
+
 static void __init smdkc210_map_io(void)
 {
 	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
@@ -210,6 +224,8 @@ static void __init smdkc210_machine_init(void)
 	s3c_sdhci2_set_platdata(&smdkc210_hsmmc2_pdata);
 	s3c_sdhci3_set_platdata(&smdkc210_hsmmc3_pdata);
 
+	samsung_bl_set(&smdkc210_bl_gpio_info, &smdkc210_bl_data);
+
 	platform_add_devices(smdkc210_devices, ARRAY_SIZE(smdkc210_devices));
 }
 

arch/arm/mach-exynos4/mach-smdkv310.c

@@ -16,6 +16,7 @@
 #include <linux/io.h>
 #include <linux/i2c.h>
 #include <linux/input.h>
+#include <linux/pwm_backlight.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
@@ -29,6 +30,8 @@
 #include <plat/sdhci.h>
 #include <plat/iic.h>
 #include <plat/pd.h>
+#include <plat/gpio-cfg.h>
+#include <plat/backlight.h>
 
 #include <mach/map.h>
 
@@ -209,6 +212,17 @@ static void __init smdkv310_smsc911x_init(void)
 		     (0x1 << S5P_SROM_BCX__TACS__SHIFT), S5P_SROM_BC1);
 }
 
+/* LCD Backlight data */
+static struct samsung_bl_gpio_info smdkv310_bl_gpio_info = {
+	.no = EXYNOS4_GPD0(1),
+	.func = S3C_GPIO_SFN(2),
+};
+
+static struct platform_pwm_backlight_data smdkv310_bl_data = {
+	.pwm_id = 1,
+	.pwm_period_ns  = 1000,
+};
+
 static void __init smdkv310_map_io(void)
 {
 	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
@@ -230,6 +244,8 @@ static void __init smdkv310_machine_init(void)
 
 	samsung_keypad_set_platdata(&smdkv310_keypad_data);
 
+	samsung_bl_set(&smdkv310_bl_gpio_info, &smdkv310_bl_data);
+
 	platform_add_devices(smdkv310_devices, ARRAY_SIZE(smdkv310_devices));
 }
 

arch/arm/mach-imx/Kconfig

@@ -167,6 +167,7 @@ config MACH_EUKREA_MBIMXSD25_BASEBOARD
 	bool "Eukrea MBIMXSD development board"
 	select IMX_HAVE_PLATFORM_GPIO_KEYS
 	select IMX_HAVE_PLATFORM_IMX_SSI
+	select LEDS_GPIO_REGISTER
 	help
 	  This adds board specific devices that can be found on Eukrea's
 	  MBIMXSD evaluation board.
@@ -265,6 +266,7 @@ config MACH_EUKREA_MBIMX27_BASEBOARD
 	select IMX_HAVE_PLATFORM_IMX_UART
 	select IMX_HAVE_PLATFORM_MXC_MMC
 	select IMX_HAVE_PLATFORM_SPI_IMX
+	select LEDS_GPIO_REGISTER
 	help
 	  This adds board specific devices that can be found on Eukrea's
 	  MBIMX27 evaluation board.
@@ -403,6 +405,7 @@ config MACH_MX31LITE
 	select IMX_HAVE_PLATFORM_MXC_NAND
 	select IMX_HAVE_PLATFORM_MXC_RTC
 	select IMX_HAVE_PLATFORM_SPI_IMX
+	select LEDS_GPIO_REGISTER
 	help
 	  Include support for MX31 LITEKIT platform. This includes specific
 	  configurations for the board and its peripherals.
@@ -471,6 +474,7 @@ config MACH_MX31MOBOARD
 	select IMX_HAVE_PLATFORM_MXC_EHCI
 	select IMX_HAVE_PLATFORM_MXC_MMC
 	select IMX_HAVE_PLATFORM_SPI_IMX
+	select LEDS_GPIO_REGISTER
 	select MXC_ULPI if USB_ULPI
 	help
 	  Include support for mx31moboard platform. This includes specific
@@ -577,6 +581,7 @@ config MACH_EUKREA_MBIMXSD35_BASEBOARD
 	select IMX_HAVE_PLATFORM_GPIO_KEYS
 	select IMX_HAVE_PLATFORM_IMX_SSI
 	select IMX_HAVE_PLATFORM_IPU_CORE
+	select LEDS_GPIO_REGISTER
 	help
 	  This adds board specific devices that can be found on Eukrea's
 	  MBIMXSD evaluation board.

arch/arm/mach-imx/dma-v1.c

@@ -476,7 +476,6 @@ void imx_dma_enable(int channel)
 	imx_dmav1_writel(imx_dmav1_readl(DMA_CCR(channel)) | CCR_CEN |
 		CCR_ACRPT, DMA_CCR(channel));
 
-#ifdef CONFIG_ARCH_MX2
 	if ((cpu_is_mx21() || cpu_is_mx27()) &&
 			imxdma->sg && imx_dma_hw_chain(imxdma)) {
 		imxdma->sg = sg_next(imxdma->sg);
@@ -488,7 +487,6 @@ void imx_dma_enable(int channel)
 				DMA_CCR(channel));
 		}
 	}
-#endif
 	imxdma->in_use = 1;
 
 	local_irq_restore(flags);
@@ -519,7 +517,6 @@ void imx_dma_disable(int channel)
 }
 EXPORT_SYMBOL(imx_dma_disable);
 
-#ifdef CONFIG_ARCH_MX2
 static void imx_dma_watchdog(unsigned long chno)
 {
 	struct imx_dma_channel *imxdma = &imx_dma_channels[chno];
@@ -531,7 +528,6 @@ static void imx_dma_watchdog(unsigned long chno)
 	if (imxdma->err_handler)
 		imxdma->err_handler(chno, imxdma->data, IMX_DMA_ERR_TIMEOUT);
 }
-#endif
 
 static irqreturn_t dma_err_handler(int irq, void *dev_id)
 {
@@ -655,10 +651,8 @@ static irqreturn_t dma_irq_handler(int irq, void *dev_id)
 {
 	int i, disr;
 
-#ifdef CONFIG_ARCH_MX2
 	if (cpu_is_mx21() || cpu_is_mx27())
 		dma_err_handler(irq, dev_id);
-#endif
 
 	disr = imx_dmav1_readl(DMA_DISR);
 
@@ -704,7 +698,6 @@ int imx_dma_request(int channel, const char *name)
 	imxdma->name = name;
 	local_irq_restore(flags); /* request_irq() can block */
 
-#ifdef CONFIG_ARCH_MX2
 	if (cpu_is_mx21() || cpu_is_mx27()) {
 		ret = request_irq(MX2x_INT_DMACH0 + channel,
 				dma_irq_handler, 0, "DMA", NULL);
@@ -718,7 +711,6 @@ int imx_dma_request(int channel, const char *name)
 		imxdma->watchdog.function = &imx_dma_watchdog;
 		imxdma->watchdog.data = channel;
 	}
-#endif
 
 	return ret;
 }
@@ -745,10 +737,8 @@ void imx_dma_free(int channel)
 	imx_dma_disable(channel);
 	imxdma->name = NULL;
 
-#ifdef CONFIG_ARCH_MX2
 	if (cpu_is_mx21() || cpu_is_mx27())
 		free_irq(MX2x_INT_DMACH0 + channel, NULL);
-#endif
 
 	local_irq_restore(flags);
 }
@@ -804,21 +794,13 @@ static int __init imx_dma_init(void)
 	int ret = 0;
 	int i;
 
-#ifdef CONFIG_ARCH_MX1
 	if (cpu_is_mx1())
 		imx_dmav1_baseaddr = MX1_IO_ADDRESS(MX1_DMA_BASE_ADDR);
-	else
-#endif
-#ifdef CONFIG_MACH_MX21
-	if (cpu_is_mx21())
+	else if (cpu_is_mx21())
 		imx_dmav1_baseaddr = MX21_IO_ADDRESS(MX21_DMA_BASE_ADDR);
-	else
-#endif
-#ifdef CONFIG_MACH_MX27
-	if (cpu_is_mx27())
+	else if (cpu_is_mx27())
 		imx_dmav1_baseaddr = MX27_IO_ADDRESS(MX27_DMA_BASE_ADDR);
 	else
-#endif
 		return 0;
 
 	dma_clk = clk_get(NULL, "dma");
@@ -829,7 +811,6 @@ static int __init imx_dma_init(void)
 	/* reset DMA module */
 	imx_dmav1_writel(DCR_DRST, DMA_DCR);
 
-#ifdef CONFIG_ARCH_MX1
 	if (cpu_is_mx1()) {
 		ret = request_irq(MX1_DMA_INT, dma_irq_handler, 0, "DMA", NULL);
 		if (ret) {
@@ -844,7 +825,7 @@ static int __init imx_dma_init(void)
 			return ret;
 		}
 	}
-#endif
+
 	/* enable DMA module */
 	imx_dmav1_writel(DCR_DEN, DMA_DCR);
 

arch/arm/mach-imx/eukrea_mbimx27-baseboard.c

@@ -112,7 +112,7 @@ eukrea_mbimx27_keymap_data __initconst = {
 	.keymap_size    = ARRAY_SIZE(eukrea_mbimx27_keymap),
 };
 
-static struct gpio_led gpio_leds[] = {
+static const struct gpio_led eukrea_mbimx27_gpio_leds[] __initconst = {
 	{
 		.name			= "led1",
 		.default_trigger	= "heartbeat",
@@ -127,17 +127,10 @@ static struct gpio_led gpio_leds[] = {
 	},
 };
 
-static struct gpio_led_platform_data gpio_led_info = {
-	.leds		= gpio_leds,
-	.num_leds	= ARRAY_SIZE(gpio_leds),
-};
-
-static struct platform_device leds_gpio = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &gpio_led_info,
-	},
+static const struct gpio_led_platform_data
+		eukrea_mbimx27_gpio_led_info __initconst = {
+	.leds		= eukrea_mbimx27_gpio_leds,
+	.num_leds	= ARRAY_SIZE(eukrea_mbimx27_gpio_leds),
 };
 
 static struct imx_fb_videomode eukrea_mbimx27_modes[] = {
@@ -293,10 +286,6 @@ static struct i2c_board_info eukrea_mbimx27_i2c_devices[] = {
 	},
 };
 
-static struct platform_device *platform_devices[] __initdata = {
-	&leds_gpio,
-};
-
 static const struct imxmmc_platform_data sdhc_pdata __initconst = {
 	.dat3_card_detect = 1,
 };
@@ -377,5 +366,5 @@ void __init eukrea_mbimx27_baseboard_init(void)
 
 	imx27_add_imx_keypad(&eukrea_mbimx27_keymap_data);
 
-	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+	gpio_led_register_device(-1, &eukrea_mbimx27_gpio_led_info);
 }

arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c

@@ -173,7 +173,7 @@ static struct platform_device eukrea_mbimxsd_lcd_powerdev = {
 	.dev.platform_data	= &eukrea_mbimxsd_lcd_power_data,
 };
 
-static struct gpio_led eukrea_mbimxsd_leds[] = {
+static const struct gpio_led eukrea_mbimxsd_leds[] __initconst = {
 	{
 		.name			= "led1",
 		.default_trigger	= "heartbeat",
@@ -182,19 +182,12 @@ static struct gpio_led eukrea_mbimxsd_leds[] = {
 	},
 };
 
-static struct gpio_led_platform_data eukrea_mbimxsd_led_info = {
+static const struct gpio_led_platform_data
+		eukrea_mbimxsd_led_info __initconst = {
 	.leds		= eukrea_mbimxsd_leds,
 	.num_leds	= ARRAY_SIZE(eukrea_mbimxsd_leds),
 };
 
-static struct platform_device eukrea_mbimxsd_leds_gpio = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &eukrea_mbimxsd_led_info,
-	},
-};
-
 static struct gpio_keys_button eukrea_mbimxsd_gpio_buttons[] = {
 	{
 		.gpio		= GPIO_SWITCH1,
@@ -212,7 +205,6 @@ static const struct gpio_keys_platform_data
 };
 
 static struct platform_device *platform_devices[] __initdata = {
-	&eukrea_mbimxsd_leds_gpio,
 	&eukrea_mbimxsd_lcd_powerdev,
 };
 
@@ -287,5 +279,6 @@ void __init eukrea_mbimxsd25_baseboard_init(void)
 				ARRAY_SIZE(eukrea_mbimxsd_i2c_devices));
 
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+	gpio_led_register_device(-1, &eukrea_mbimxsd_led_info);
 	imx_add_gpio_keys(&eukrea_mbimxsd_button_data);
 }

arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c

@@ -193,19 +193,12 @@ static struct gpio_led eukrea_mbimxsd_leds[] = {
 	},
 };
 
-static struct gpio_led_platform_data eukrea_mbimxsd_led_info = {
+static const struct gpio_led_platform_data
+		eukrea_mbimxsd_led_info __initconst = {
 	.leds		= eukrea_mbimxsd_leds,
 	.num_leds	= ARRAY_SIZE(eukrea_mbimxsd_leds),
 };
 
-static struct platform_device eukrea_mbimxsd_leds_gpio = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &eukrea_mbimxsd_led_info,
-	},
-};
-
 static struct gpio_keys_button eukrea_mbimxsd_gpio_buttons[] = {
 	{
 		.gpio		= GPIO_SWITCH1,
@@ -223,7 +216,6 @@ static const struct gpio_keys_platform_data
 };
 
 static struct platform_device *platform_devices[] __initdata = {
-	&eukrea_mbimxsd_leds_gpio,
 	&eukrea_mbimxsd_lcd_powerdev,
 };
 
@@ -299,5 +291,6 @@ void __init eukrea_mbimxsd35_baseboard_init(void)
 				ARRAY_SIZE(eukrea_mbimxsd_i2c_devices));
 
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+	gpio_led_register_device(-1, &eukrea_mbimxsd_led_info);
 	imx_add_gpio_keys(&eukrea_mbimxsd_button_data);
 }

arch/arm/mach-imx/mach-apf9328.c

@@ -99,11 +99,6 @@ static struct platform_device dm9000x_device = {
 	}
 };
 
-/* --- SERIAL RESSOURCE --- */
-static const struct imxuart_platform_data uart0_pdata __initconst = {
-	.flags = 0,
-};
-
 static const struct imxuart_platform_data uart1_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
@@ -121,7 +116,7 @@ static void __init apf9328_init(void)
 			ARRAY_SIZE(apf9328_pins),
 			"APF9328");
 
-	imx1_add_imx_uart0(&uart0_pdata);
+	imx1_add_imx_uart0(NULL);
 	imx1_add_imx_uart1(&uart1_pdata);
 
 	platform_add_devices(devices, ARRAY_SIZE(devices));

arch/arm/mach-imx/mach-imx27_visstrim_m10.c

@@ -34,7 +34,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <mach/common.h>
-#include <mach/iomux.h>
+#include <mach/iomux-mx27.h>
 
 #include "devices-imx27.h"
 

arch/arm/mach-imx/mach-mx27_3ds.c

@@ -47,6 +47,7 @@
 #define SPI2_SS0		IMX_GPIO_NR(4, 21)
 #define EXPIO_PARENT_INT	gpio_to_irq(IMX_GPIO_NR(3, 28))
 #define PMIC_INT		IMX_GPIO_NR(3, 14)
+#define SD1_CD			IMX_GPIO_NR(2, 26)
 
 static const int mx27pdk_pins[] __initconst = {
 	/* UART1 */
@@ -135,13 +136,13 @@ static const struct matrix_keymap_data mx27_3ds_keymap_data __initconst = {
 static int mx27_3ds_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
 				void *data)
 {
-	return request_irq(IRQ_GPIOB(26), detect_irq, IRQF_TRIGGER_FALLING |
-			IRQF_TRIGGER_RISING, "sdhc1-card-detect", data);
+	return request_irq(gpio_to_irq(SD1_CD), detect_irq,
+	IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, "sdhc1-card-detect", data);
 }
 
 static void mx27_3ds_sdhc1_exit(struct device *dev, void *data)
 {
-	free_irq(IRQ_GPIOB(26), data);
+	free_irq(gpio_to_irq(SD1_CD), data);
 }
 
 static const struct imxmmc_platform_data sdhc1_pdata __initconst = {
@@ -261,11 +262,11 @@ static struct mc13xxx_platform_data mc13783_pdata = {
 };
 
 /* SPI */
-static int spi2_internal_chipselect[] = {SPI2_SS0};
+static int spi2_chipselect[] = {SPI2_SS0};
 
 static const struct spi_imx_master spi2_pdata __initconst = {
-	.chipselect	= spi2_internal_chipselect,
-	.num_chipselect	= ARRAY_SIZE(spi2_internal_chipselect),
+	.chipselect	= spi2_chipselect,
+	.num_chipselect	= ARRAY_SIZE(spi2_chipselect),
 };
 
 static struct spi_board_info mx27_3ds_spi_devs[] __initdata = {
@@ -275,7 +276,7 @@ static struct spi_board_info mx27_3ds_spi_devs[] __initdata = {
 		.bus_num	= 1,
 		.chip_select	= 0, /* SS0 */
 		.platform_data	= &mc13783_pdata,
-		.irq = IRQ_GPIOC(14),
+		.irq = gpio_to_irq(PMIC_INT),
 		.mode = SPI_CS_HIGH,
 	},
 };

arch/arm/mach-imx/mach-mx31moboard.c

@@ -425,7 +425,7 @@ static int __init moboard_usbh2_init(void)
 	return 0;
 }
 
-static struct gpio_led mx31moboard_leds[] = {
+static const struct gpio_led mx31moboard_leds[] __initconst = {
 	{
 		.name	= "coreboard-led-0:red:running",
 		.default_trigger = "heartbeat",
@@ -442,26 +442,17 @@ static struct gpio_led mx31moboard_leds[] = {
 	},
 };
 
-static struct gpio_led_platform_data mx31moboard_led_pdata = {
+static const struct gpio_led_platform_data mx31moboard_led_pdata __initconst = {
 	.num_leds	= ARRAY_SIZE(mx31moboard_leds),
 	.leds		= mx31moboard_leds,
 };
 
-static struct platform_device mx31moboard_leds_device = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &mx31moboard_led_pdata,
-	},
-};
-
 static const struct ipu_platform_data mx3_ipu_data __initconst = {
 	.irq_base = MXC_IPU_IRQ_START,
 };
 
 static struct platform_device *devices[] __initdata = {
 	&mx31moboard_flash,
-	&mx31moboard_leds_device,
 };
 
 static struct mx3_camera_pdata camera_pdata __initdata = {
@@ -513,6 +504,7 @@ static void __init mx31moboard_init(void)
 		"moboard");
 
 	platform_add_devices(devices, ARRAY_SIZE(devices));
+	gpio_led_register_device(-1, &mx31moboard_led_pdata);
 
 	imx31_add_imx_uart0(&uart0_pdata);
 	imx31_add_imx_uart4(&uart4_pdata);

arch/arm/mach-imx/mach-mx35_3ds.c

@@ -43,7 +43,7 @@
 
 #include "devices-imx35.h"
 
-#define EXPIO_PARENT_INT	(MXC_INTERNAL_IRQS + GPIO_PORTA + 1)
+#define EXPIO_PARENT_INT	gpio_to_irq(IMX_GPIO_NR(1, 1))
 
 static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,

arch/arm/mach-imx/mach-scb9328.c

@@ -101,21 +101,7 @@ static const int mxc_uart1_pins[] = {
 	PC12_PF_UART1_RXD,
 };
 
-static int uart1_mxc_init(struct platform_device *pdev)
-{
-	return mxc_gpio_setup_multiple_pins(mxc_uart1_pins,
-			ARRAY_SIZE(mxc_uart1_pins), "UART1");
-}
-
-static void uart1_mxc_exit(struct platform_device *pdev)
-{
-	mxc_gpio_release_multiple_pins(mxc_uart1_pins,
-			ARRAY_SIZE(mxc_uart1_pins));
-}
-
 static const struct imxuart_platform_data uart_pdata __initconst = {
-	.init = uart1_mxc_init,
-	.exit = uart1_mxc_exit,
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
@@ -131,6 +117,9 @@ static void __init scb9328_init(void)
 {
 	imx1_soc_init();
 
+	mxc_gpio_setup_multiple_pins(mxc_uart1_pins,
+			ARRAY_SIZE(mxc_uart1_pins), "UART1");
+
 	imx1_add_imx_uart0(&uart_pdata);
 
 	printk(KERN_INFO"Scb9328: Adding devices\n");

arch/arm/mach-imx/mx31lite-db.c

@@ -161,7 +161,7 @@ static const struct spi_imx_master spi0_pdata __initconst = {
 
 /* GPIO LEDs */
 
-static struct gpio_led litekit_leds[] = {
+static const struct gpio_led litekit_leds[] __initconst = {
 	{
 		.name           = "GPIO0",
 		.gpio           = IOMUX_TO_GPIO(MX31_PIN_COMPARE),
@@ -176,19 +176,12 @@ static struct gpio_led litekit_leds[] = {
 	}
 };
 
-static struct gpio_led_platform_data litekit_led_platform_data = {
+static const struct gpio_led_platform_data
+		litekit_led_platform_data __initconst = {
 	.leds           = litekit_leds,
 	.num_leds       = ARRAY_SIZE(litekit_leds),
 };
 
-static struct platform_device litekit_led_device = {
-	.name   = "leds-gpio",
-	.id     = -1,
-	.dev    = {
-		.platform_data = &litekit_led_platform_data,
-	},
-};
-
 void __init mx31lite_db_init(void)
 {
 	mxc_iomux_setup_multiple_pins(litekit_db_board_pins,
@@ -197,7 +190,7 @@ void __init mx31lite_db_init(void)
 	imx31_add_imx_uart0(&uart_pdata);
 	imx31_add_mxc_mmc(0, &mmc_pdata);
 	imx31_add_spi_imx0(&spi0_pdata);
-	platform_device_register(&litekit_led_device);
+	gpio_led_register_device(-1, &litekit_led_platform_data);
 	imx31_add_imx2_wdt(NULL);
 	imx31_add_mxc_rtc(NULL);
 }

arch/arm/mach-integrator/include/mach/bits.h

@@ -1,61 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-/* DO NOT EDIT!! - this file automatically generated
- *                 from .s file by awk -f s2h.awk
- */
-/*  Bit field definitions
- *  Copyright (C) ARM Limited 1998. All rights reserved.
- */
-
-#ifndef __bits_h
-#define __bits_h                        1
-
-#define BIT0                            0x00000001
-#define BIT1                            0x00000002
-#define BIT2                            0x00000004
-#define BIT3                            0x00000008
-#define BIT4                            0x00000010
-#define BIT5                            0x00000020
-#define BIT6                            0x00000040
-#define BIT7                            0x00000080
-#define BIT8                            0x00000100
-#define BIT9                            0x00000200
-#define BIT10                           0x00000400
-#define BIT11                           0x00000800
-#define BIT12                           0x00001000
-#define BIT13                           0x00002000
-#define BIT14                           0x00004000
-#define BIT15                           0x00008000
-#define BIT16                           0x00010000
-#define BIT17                           0x00020000
-#define BIT18                           0x00040000
-#define BIT19                           0x00080000
-#define BIT20                           0x00100000
-#define BIT21                           0x00200000
-#define BIT22                           0x00400000
-#define BIT23                           0x00800000
-#define BIT24                           0x01000000
-#define BIT25                           0x02000000
-#define BIT26                           0x04000000
-#define BIT27                           0x08000000
-#define BIT28                           0x10000000
-#define BIT29                           0x20000000
-#define BIT30                           0x40000000
-#define BIT31                           0x80000000
-
-#endif
-
-/*         END */

arch/arm/mach-mx5/Kconfig

@@ -109,6 +109,7 @@ config MACH_EUKREA_MBIMX51_BASEBOARD
 	bool
 	select IMX_HAVE_PLATFORM_IMX_KEYPAD
 	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+	select LEDS_GPIO_REGISTER
 	help
 	  This adds board specific devices that can be found on Eukrea's
 	  MBIMX51 evaluation board.
@@ -135,6 +136,7 @@ config MACH_EUKREA_MBIMXSD51_BASEBOARD
 	prompt "Eukrea MBIMXSD development board"
 	bool
 	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+	select LEDS_GPIO_REGISTER
 	help
 	  This adds board specific devices that can be found on Eukrea's
 	  MBIMXSD evaluation board.
@@ -151,6 +153,7 @@ config MX51_EFIKA_COMMON
 
 config MACH_MX51_EFIKAMX
 	bool "Support MX51 Genesi Efika MX nettop"
+	select LEDS_GPIO_REGISTER
 	select MX51_EFIKA_COMMON
 	help
 	  Include support for Genesi Efika MX nettop. This includes specific
@@ -158,6 +161,7 @@ config MACH_MX51_EFIKAMX
 
 config MACH_MX51_EFIKASB
 	bool "Support MX51 Genesi Efika Smartbook"
+	select LEDS_GPIO_REGISTER
 	select MX51_EFIKA_COMMON
 	help
 	  Include support for Genesi Efika Smartbook. This includes specific

arch/arm/mach-mx5/board-cpuimx51.c

@@ -43,10 +43,6 @@
 #define CPUIMX51_QUARTB_GPIO	IMX_GPIO_NR(3, 25)
 #define CPUIMX51_QUARTC_GPIO	IMX_GPIO_NR(3, 26)
 #define CPUIMX51_QUARTD_GPIO	IMX_GPIO_NR(3, 27)
-#define CPUIMX51_QUARTA_IRQ	(MXC_INTERNAL_IRQS + CPUIMX51_QUARTA_GPIO)
-#define CPUIMX51_QUARTB_IRQ	(MXC_INTERNAL_IRQS + CPUIMX51_QUARTB_GPIO)
-#define CPUIMX51_QUARTC_IRQ	(MXC_INTERNAL_IRQS + CPUIMX51_QUARTC_GPIO)
-#define CPUIMX51_QUARTD_IRQ	(MXC_INTERNAL_IRQS + CPUIMX51_QUARTD_GPIO)
 #define CPUIMX51_QUART_XTAL	14745600
 #define CPUIMX51_QUART_REGSHIFT	17
 
@@ -61,7 +57,7 @@
 static struct plat_serial8250_port serial_platform_data[] = {
 	{
 		.mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x400000),
-		.irq = CPUIMX51_QUARTA_IRQ,
+		.irq = gpio_to_irq(CPUIMX51_QUARTA_GPIO),
 		.irqflags = IRQF_TRIGGER_HIGH,
 		.uartclk = CPUIMX51_QUART_XTAL,
 		.regshift = CPUIMX51_QUART_REGSHIFT,
@@ -69,7 +65,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
 		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
 	}, {
 		.mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x800000),
-		.irq = CPUIMX51_QUARTB_IRQ,
+		.irq = gpio_to_irq(CPUIMX51_QUARTB_GPIO),
 		.irqflags = IRQF_TRIGGER_HIGH,
 		.uartclk = CPUIMX51_QUART_XTAL,
 		.regshift = CPUIMX51_QUART_REGSHIFT,
@@ -77,7 +73,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
 		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
 	}, {
 		.mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x1000000),
-		.irq = CPUIMX51_QUARTC_IRQ,
+		.irq = gpio_to_irq(CPUIMX51_QUARTC_GPIO),
 		.irqflags = IRQF_TRIGGER_HIGH,
 		.uartclk = CPUIMX51_QUART_XTAL,
 		.regshift = CPUIMX51_QUART_REGSHIFT,
@@ -85,7 +81,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
 		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
 	}, {
 		.mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x2000000),
-		.irq = CPUIMX51_QUARTD_IRQ,
+		.irq = irq_to_gpio(CPUIMX51_QUARTD_GPIO),
 		.irqflags = IRQF_TRIGGER_HIGH,
 		.uartclk = CPUIMX51_QUART_XTAL,
 		.regshift = CPUIMX51_QUART_REGSHIFT,

arch/arm/mach-mx5/board-mx51_3ds.c

@@ -13,6 +13,7 @@
 #include <linux/irq.h>
 #include <linux/platform_device.h>
 #include <linux/spi/spi.h>
+#include <linux/gpio.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -26,7 +27,7 @@
 #include "devices-imx51.h"
 #include "devices.h"
 
-#define EXPIO_PARENT_INT	(MXC_INTERNAL_IRQS + GPIO_PORTA + 6)
+#define EXPIO_PARENT_INT	gpio_to_irq(IMX_GPIO_NR(1, 6))
 #define MX51_3DS_ECSPI2_CS	(GPIO_PORTC + 28)
 
 static iomux_v3_cfg_t mx51_3ds_pads[] = {

arch/arm/mach-mx5/board-mx51_babbage.c

@@ -36,7 +36,7 @@
 
 #define BABBAGE_USB_HUB_RESET	IMX_GPIO_NR(1, 7)
 #define BABBAGE_USBH1_STP	IMX_GPIO_NR(1, 27)
-#define BABBAGE_PHY_RESET	IMX_GPIO_NR(2, 5)
+#define BABBAGE_USB_PHY_RESET	IMX_GPIO_NR(2, 5)
 #define BABBAGE_FEC_PHY_RESET	IMX_GPIO_NR(2, 14)
 #define BABBAGE_POWER_KEY	IMX_GPIO_NR(2, 21)
 #define BABBAGE_ECSPI1_CS0	IMX_GPIO_NR(4, 24)
@@ -110,6 +110,9 @@ static iomux_v3_cfg_t mx51babbage_pads[] = {
 	/* USB HUB reset line*/
 	MX51_PAD_GPIO1_7__GPIO1_7,
 
+	/* USB PHY reset line */
+	MX51_PAD_EIM_D21__GPIO2_5,
+
 	/* FEC */
 	MX51_PAD_EIM_EB2__FEC_MDIO,
 	MX51_PAD_EIM_EB3__FEC_RDATA1,
@@ -169,34 +172,31 @@ static struct imxi2c_platform_data babbage_hsi2c_data = {
 	.bitrate = 400000,
 };
 
+static struct gpio mx51_babbage_usbh1_gpios[] = {
+	{ BABBAGE_USBH1_STP, GPIOF_OUT_INIT_LOW, "usbh1_stp" },
+	{ BABBAGE_USB_PHY_RESET, GPIOF_OUT_INIT_LOW, "usbh1_phy_reset" },
+};
+
 static int gpio_usbh1_active(void)
 {
 	iomux_v3_cfg_t usbh1stp_gpio = MX51_PAD_USBH1_STP__GPIO1_27;
-	iomux_v3_cfg_t phyreset_gpio = MX51_PAD_EIM_D21__GPIO2_5;
 	int ret;
 
 	/* Set USBH1_STP to GPIO and toggle it */
 	mxc_iomux_v3_setup_pad(usbh1stp_gpio);
-	ret = gpio_request(BABBAGE_USBH1_STP, "usbh1_stp");
+	ret = gpio_request_array(mx51_babbage_usbh1_gpios,
+					ARRAY_SIZE(mx51_babbage_usbh1_gpios));
 
 	if (ret) {
-		pr_debug("failed to get MX51_PAD_USBH1_STP__GPIO_1_27: %d\n", ret);
+		pr_debug("failed to get USBH1 pins: %d\n", ret);
 		return ret;
 	}
-	gpio_direction_output(BABBAGE_USBH1_STP, 0);
-	gpio_set_value(BABBAGE_USBH1_STP, 1);
-	msleep(100);
-	gpio_free(BABBAGE_USBH1_STP);
-
-	/* De-assert USB PHY RESETB */
-	mxc_iomux_v3_setup_pad(phyreset_gpio);
-	ret = gpio_request(BABBAGE_PHY_RESET, "phy_reset");
 
-	if (ret) {
-		pr_debug("failed to get MX51_PAD_EIM_D21__GPIO_2_5: %d\n", ret);
-		return ret;
-	}
-	gpio_direction_output(BABBAGE_PHY_RESET, 1);
+	msleep(100);
+	gpio_set_value(BABBAGE_USBH1_STP, 1);
+	gpio_set_value(BABBAGE_USB_PHY_RESET, 1);
+	gpio_free_array(mx51_babbage_usbh1_gpios,
+					ARRAY_SIZE(mx51_babbage_usbh1_gpios));
 	return 0;
 }
 

arch/arm/mach-mx5/board-mx51_efikamx.c

@@ -139,7 +139,7 @@ static void __init mx51_efikamx_board_id(void)
 	}
 }
 
-static struct gpio_led mx51_efikamx_leds[] = {
+static struct gpio_led mx51_efikamx_leds[] __initdata = {
 	{
 		.name = "efikamx:green",
 		.default_trigger = "default-on",
@@ -157,19 +157,12 @@ static struct gpio_led mx51_efikamx_leds[] = {
 	},
 };
 
-static struct gpio_led_platform_data mx51_efikamx_leds_data = {
+static const struct gpio_led_platform_data
+		mx51_efikamx_leds_data __initconst = {
 	.leds = mx51_efikamx_leds,
 	.num_leds = ARRAY_SIZE(mx51_efikamx_leds),
 };
 
-static struct platform_device mx51_efikamx_leds_device = {
-	.name = "leds-gpio",
-	.id = -1,
-	.dev = {
-		.platform_data = &mx51_efikamx_leds_data,
-	},
-};
-
 static struct gpio_keys_button mx51_efikamx_powerkey[] = {
 	{
 		.code = KEY_POWER,
@@ -250,7 +243,7 @@ static void __init mx51_efikamx_init(void)
 		mx51_efikamx_leds[2].default_trigger = "mmc1";
 	}
 
-	platform_device_register(&mx51_efikamx_leds_device);
+	gpio_led_register_device(-1, &mx51_efikamx_leds_data);
 	imx_add_gpio_keys(&mx51_efikamx_powerkey_data);
 
 	if (system_rev == 0x11) {

arch/arm/mach-mx5/board-mx51_efikasb.c

@@ -132,7 +132,7 @@ static void __init mx51_efikasb_usb(void)
 		mxc_register_device(&mxc_usbh2_device, &usbh2_config);
 }
 
-static struct gpio_led mx51_efikasb_leds[] = {
+static const struct gpio_led mx51_efikasb_leds[] __initconst = {
 	{
 		.name = "efikasb:green",
 		.default_trigger = "default-on",
@@ -146,19 +146,12 @@ static struct gpio_led mx51_efikasb_leds[] = {
 	},
 };
 
-static struct gpio_led_platform_data mx51_efikasb_leds_data = {
+static const struct gpio_led_platform_data
+		mx51_efikasb_leds_data __initconst = {
 	.leds = mx51_efikasb_leds,
 	.num_leds = ARRAY_SIZE(mx51_efikasb_leds),
 };
 
-static struct platform_device mx51_efikasb_leds_device = {
-	.name = "leds-gpio",
-	.id = -1,
-	.dev = {
-		.platform_data = &mx51_efikasb_leds_data,
-	},
-};
-
 static struct gpio_keys_button mx51_efikasb_keys[] = {
 	{
 		.code = KEY_POWER,
@@ -258,9 +251,8 @@ static void __init efikasb_board_init(void)
 	mx51_efikasb_usb();
 	imx51_add_sdhci_esdhc_imx(1, NULL);
 
-	platform_device_register(&mx51_efikasb_leds_device);
+	gpio_led_register_device(-1, &mx51_efikasb_leds_data);
 	imx_add_gpio_keys(&mx51_efikasb_keys_data);
-
 }
 
 static void __init mx51_efikasb_timer_init(void)

arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c

@@ -31,13 +31,12 @@
 #include "devices.h"
 
 #define MBIMX51_TSC2007_GPIO	IMX_GPIO_NR(3, 30)
-#define MBIMX51_TSC2007_IRQ	(MXC_INTERNAL_IRQS + MBIMX51_TSC2007_GPIO)
 #define MBIMX51_LED0		IMX_GPIO_NR(3, 5)
 #define MBIMX51_LED1		IMX_GPIO_NR(3, 6)
 #define MBIMX51_LED2		IMX_GPIO_NR(3, 7)
 #define MBIMX51_LED3		IMX_GPIO_NR(3, 8)
 
-static struct gpio_led mbimx51_leds[] = {
+static const struct gpio_led mbimx51_leds[] __initconst = {
 	{
 		.name			= "led0",
 		.default_trigger	= "heartbeat",
@@ -64,23 +63,11 @@ static struct gpio_led mbimx51_leds[] = {
 	},
 };
 
-static struct gpio_led_platform_data mbimx51_leds_info = {
+static const struct gpio_led_platform_data mbimx51_leds_info __initconst = {
 	.leds		= mbimx51_leds,
 	.num_leds	= ARRAY_SIZE(mbimx51_leds),
 };
 
-static struct platform_device mbimx51_leds_gpio = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &mbimx51_leds_info,
-	},
-};
-
-static struct platform_device *devices[] __initdata = {
-	&mbimx51_leds_gpio,
-};
-
 static iomux_v3_cfg_t mbimx51_pads[] = {
 	/* UART2 */
 	MX51_PAD_UART2_RXD__UART2_RXD,
@@ -173,7 +160,7 @@ struct tsc2007_platform_data tsc2007_data = {
 static struct i2c_board_info mbimx51_i2c_devices[] = {
 	{
 		I2C_BOARD_INFO("tsc2007", 0x49),
-		.irq  = MBIMX51_TSC2007_IRQ,
+		.irq  = gpio_to_irq(MBIMX51_TSC2007_GPIO),
 		.platform_data = &tsc2007_data,
 	}, {
 		I2C_BOARD_INFO("tlv320aic23", 0x1a),
@@ -204,13 +191,14 @@ void __init eukrea_mbimx51_baseboard_init(void)
 	gpio_direction_output(MBIMX51_LED3, 1);
 	gpio_free(MBIMX51_LED3);
 
-	platform_add_devices(devices, ARRAY_SIZE(devices));
+	gpio_led_register_device(-1, &mbimx51_leds_info);
 
 	imx51_add_imx_keypad(&mbimx51_map_data);
 
 	gpio_request(MBIMX51_TSC2007_GPIO, "tsc2007_irq");
 	gpio_direction_input(MBIMX51_TSC2007_GPIO);
-	irq_set_irq_type(MBIMX51_TSC2007_IRQ, IRQF_TRIGGER_FALLING);
+	irq_set_irq_type(gpio_to_irq(MBIMX51_TSC2007_GPIO),
+					IRQF_TRIGGER_FALLING);
 	i2c_register_board_info(1, mbimx51_i2c_devices,
 				ARRAY_SIZE(mbimx51_i2c_devices));
 

arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c

@@ -74,7 +74,7 @@ static iomux_v3_cfg_t eukrea_mbimxsd_pads[] = {
 #define GPIO_LED1	IMX_GPIO_NR(3, 30)
 #define GPIO_SWITCH1	IMX_GPIO_NR(3, 31)
 
-static struct gpio_led eukrea_mbimxsd_leds[] = {
+static const struct gpio_led eukrea_mbimxsd_leds[] __initconst = {
 	{
 		.name			= "led1",
 		.default_trigger	= "heartbeat",
@@ -83,19 +83,12 @@ static struct gpio_led eukrea_mbimxsd_leds[] = {
 	},
 };
 
-static struct gpio_led_platform_data eukrea_mbimxsd_led_info = {
+static const struct gpio_led_platform_data
+		eukrea_mbimxsd_led_info __initconst = {
 	.leds		= eukrea_mbimxsd_leds,
 	.num_leds	= ARRAY_SIZE(eukrea_mbimxsd_leds),
 };
 
-static struct platform_device eukrea_mbimxsd_leds_gpio = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &eukrea_mbimxsd_led_info,
-	},
-};
-
 static struct gpio_keys_button eukrea_mbimxsd_gpio_buttons[] = {
 	{
 		.gpio		= GPIO_SWITCH1,
@@ -112,10 +105,6 @@ static const struct gpio_keys_platform_data
 	.nbuttons	= ARRAY_SIZE(eukrea_mbimxsd_gpio_buttons),
 };
 
-static struct platform_device *platform_devices[] __initdata = {
-	&eukrea_mbimxsd_leds_gpio,
-};
-
 static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
@@ -154,6 +143,6 @@ void __init eukrea_mbimxsd51_baseboard_init(void)
 	i2c_register_board_info(0, eukrea_mbimxsd_i2c_devices,
 				ARRAY_SIZE(eukrea_mbimxsd_i2c_devices));
 
-	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+	gpio_led_register_device(-1, &eukrea_mbimxsd_led_info);
 	imx_add_gpio_keys(&eukrea_mbimxsd_button_data);
 }

arch/arm/mach-mxs/Kconfig

@@ -55,6 +55,7 @@ config MACH_MX28EVK
 config MODULE_TX28
 	bool
 	select SOC_IMX28
+	select LEDS_GPIO_REGISTER
 	select MXS_HAVE_AMBA_DUART
 	select MXS_HAVE_PLATFORM_AUART
 	select MXS_HAVE_PLATFORM_FEC

arch/arm/mach-mxs/mach-tx28.c

@@ -109,7 +109,7 @@ static const iomux_cfg_t tx28_stk5v3_pads[] __initconst = {
 		(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
 };
 
-static struct gpio_led tx28_stk5v3_leds[] = {
+static const struct gpio_led tx28_stk5v3_leds[] __initconst = {
 	{
 		.name = "GPIO-LED",
 		.default_trigger = "heartbeat",
@@ -151,8 +151,7 @@ static void __init tx28_stk5v3_init(void)
 	/* spi via ssp will be added when available */
 	spi_register_board_info(tx28_spi_board_info,
 			ARRAY_SIZE(tx28_spi_board_info));
-	mxs_add_platform_device("leds-gpio", 0, NULL, 0,
-			&tx28_stk5v3_led_data, sizeof(tx28_stk5v3_led_data));
+	gpio_led_register_device(0, &tx28_stk5v3_led_data);
 	mx28_add_mxs_i2c(0);
 	i2c_register_board_info(0, tx28_stk5v3_i2c_boardinfo,
 			ARRAY_SIZE(tx28_stk5v3_i2c_boardinfo));

arch/arm/mach-omap1/board-ams-delta.c

@@ -138,7 +138,7 @@ void ams_delta_latch2_write(u16 mask, u16 value)
 static void __init ams_delta_init_irq(void)
 {
 	omap1_init_common_hw();
-	omap_init_irq();
+	omap1_init_irq();
 }
 
 static struct map_desc ams_delta_io_desc[] __initdata = {
@@ -391,7 +391,7 @@ MACHINE_START(AMS_DELTA, "Amstrad E3 (Delta)")
 	.reserve	= omap_reserve,
 	.init_irq	= ams_delta_init_irq,
 	.init_machine	= ams_delta_init,
-	.timer		= &omap_timer,
+	.timer		= &omap1_timer,
 MACHINE_END
 
 EXPORT_SYMBOL(ams_delta_latch1_write);

arch/arm/mach-omap1/board-fsample.c

@@ -329,7 +329,7 @@ static void __init omap_fsample_init(void)
 static void __init omap_fsample_init_irq(void)
 {
 	omap1_init_common_hw();
-	omap_init_irq();
+	omap1_init_irq();
 }
 
 /* Only FPGA needs to be mapped here. All others are done with ioremap */
@@ -394,5 +394,5 @@ MACHINE_START(OMAP_FSAMPLE, "OMAP730 F-Sample")
 	.reserve	= omap_reserve,
 	.init_irq	= omap_fsample_init_irq,
 	.init_machine	= omap_fsample_init,
-	.timer		= &omap_timer,
+	.timer		= &omap1_timer,
 MACHINE_END

arch/arm/mach-omap1/board-generic.c

@@ -31,7 +31,7 @@
 static void __init omap_generic_init_irq(void)
 {
 	omap1_init_common_hw();
-	omap_init_irq();
+	omap1_init_irq();
 }
 
 /* assume no Mini-AB port */
@@ -99,5 +99,5 @@ MACHINE_START(OMAP_GENERIC, "Generic OMAP1510/1610/1710")
 	.reserve	= omap_reserve,
 	.init_irq	= omap_generic_init_irq,
 	.init_machine	= omap_generic_init,
-	.timer		= &omap_timer,
+	.timer		= &omap1_timer,
 MACHINE_END

arch/arm/mach-omap1/board-h2.c

@@ -376,7 +376,7 @@ static struct i2c_board_info __initdata h2_i2c_board_info[] = {
 static void __init h2_init_irq(void)
 {
 	omap1_init_common_hw();
-	omap_init_irq();
+	omap1_init_irq();
 }
 
 static struct omap_usb_config h2_usb_config __initdata = {
@@ -466,5 +466,5 @@ MACHINE_START(OMAP_H2, "TI-H2")
 	.reserve	= omap_reserve,
 	.init_irq	= h2_init_irq,
 	.init_machine	= h2_init,
-	.timer		= &omap_timer,
+	.timer		= &omap1_timer,
 MACHINE_END

arch/arm/mach-omap1/board-h3.c

@@ -439,7 +439,7 @@ static void __init h3_init(void)
 static void __init h3_init_irq(void)
 {
 	omap1_init_common_hw();
-	omap_init_irq();
+	omap1_init_irq();
 }
 
 static void __init h3_map_io(void)
@@ -454,5 +454,5 @@ MACHINE_START(OMAP_H3, "TI OMAP1710 H3 board")
 	.reserve	= omap_reserve,
 	.init_irq	= h3_init_irq,
 	.init_machine	= h3_init,
-	.timer		= &omap_timer,
+	.timer		= &omap1_timer,
 MACHINE_END

arch/arm/mach-omap1/board-htcherald.c

@@ -605,7 +605,7 @@ static void __init htcherald_init_irq(void)
 {
 	printk(KERN_INFO "htcherald_init_irq.\n");
 	omap1_init_common_hw();
-	omap_init_irq();
+	omap1_init_irq();
 }
 
 MACHINE_START(HERALD, "HTC Herald")
@@ -616,5 +616,5 @@ MACHINE_START(HERALD, "HTC Herald")
 	.reserve	= omap_reserve,
 	.init_irq       = htcherald_init_irq,
 	.init_machine   = htcherald_init,
-	.timer          = &omap_timer,
+	.timer          = &omap1_timer,
 MACHINE_END

arch/arm/mach-omap1/board-innovator.c

@@ -292,7 +292,7 @@ static void __init innovator_init_smc91x(void)
 static void __init innovator_init_irq(void)
 {
 	omap1_init_common_hw();
-	omap_init_irq();
+	omap1_init_irq();
 }
 
 #ifdef CONFIG_ARCH_OMAP15XX
@@ -464,5 +464,5 @@ MACHINE_START(OMAP_INNOVATOR, "TI-Innovator")
 	.reserve	= omap_reserve,
 	.init_irq	= innovator_init_irq,
 	.init_machine	= innovator_init,
-	.timer		= &omap_timer,
+	.timer		= &omap1_timer,
 MACHINE_END

arch/arm/mach-omap1/board-nokia770.c

@@ -51,7 +51,7 @@ static void __init omap_nokia770_init_irq(void)
 	omap_writew((omap_readw(0xfffb5004) & ~2), 0xfffb5004);
 
 	omap1_init_common_hw();
-	omap_init_irq();
+	omap1_init_irq();
 }
 
 static const unsigned int nokia770_keymap[] = {
@@ -269,5 +269,5 @@ MACHINE_START(NOKIA770, "Nokia 770")
 	.reserve	= omap_reserve,
 	.init_irq	= omap_nokia770_init_irq,
 	.init_machine	= omap_nokia770_init,
-	.timer		= &omap_timer,
+	.timer		= &omap1_timer,
 MACHINE_END

arch/arm/mach-omap1/board-osk.c

@@ -282,7 +282,7 @@ static void __init osk_init_cf(void)
 static void __init osk_init_irq(void)
 {
 	omap1_init_common_hw();
-	omap_init_irq();
+	omap1_init_irq();
 }
 
 static struct omap_usb_config osk_usb_config __initdata = {
@@ -588,5 +588,5 @@ MACHINE_START(OMAP_OSK, "TI-OSK")
 	.reserve	= omap_reserve,
 	.init_irq	= osk_init_irq,
 	.init_machine	= osk_init,
-	.timer		= &omap_timer,
+	.timer		= &omap1_timer,
 MACHINE_END

arch/arm/mach-omap1/board-palmte.c

@@ -62,7 +62,7 @@
 static void __init omap_palmte_init_irq(void)
 {
 	omap1_init_common_hw();
-	omap_init_irq();
+	omap1_init_irq();
 }
 
 static const unsigned int palmte_keymap[] = {
@@ -280,5 +280,5 @@ MACHINE_START(OMAP_PALMTE, "OMAP310 based Palm Tungsten E")
 	.reserve	= omap_reserve,
 	.init_irq	= omap_palmte_init_irq,
 	.init_machine	= omap_palmte_init,
-	.timer		= &omap_timer,
+	.timer		= &omap1_timer,
 MACHINE_END

arch/arm/mach-omap1/board-palmtt.c

@@ -266,7 +266,7 @@ static struct spi_board_info __initdata palmtt_boardinfo[] = {
 static void __init omap_palmtt_init_irq(void)
 {
 	omap1_init_common_hw();
-	omap_init_irq();
+	omap1_init_irq();
 }
 
 static struct omap_usb_config palmtt_usb_config __initdata = {
@@ -326,5 +326,5 @@ MACHINE_START(OMAP_PALMTT, "OMAP1510 based Palm Tungsten|T")
 	.reserve	= omap_reserve,
 	.init_irq	= omap_palmtt_init_irq,
 	.init_machine	= omap_palmtt_init,
-	.timer		= &omap_timer,
+	.timer		= &omap1_timer,
 MACHINE_END

arch/arm/mach-omap1/board-palmz71.c

@@ -61,7 +61,7 @@ static void __init
 omap_palmz71_init_irq(void)
 {
 	omap1_init_common_hw();
-	omap_init_irq();
+	omap1_init_irq();
 }
 
 static const unsigned int palmz71_keymap[] = {
@@ -346,5 +346,5 @@ MACHINE_START(OMAP_PALMZ71, "OMAP310 based Palm Zire71")
 	.reserve	= omap_reserve,
 	.init_irq	= omap_palmz71_init_irq,
 	.init_machine	= omap_palmz71_init,
-	.timer		= &omap_timer,
+	.timer		= &omap1_timer,
 MACHINE_END

arch/arm/mach-omap1/board-perseus2.c

@@ -297,7 +297,7 @@ static void __init omap_perseus2_init(void)
 static void __init omap_perseus2_init_irq(void)
 {
 	omap1_init_common_hw();
-	omap_init_irq();
+	omap1_init_irq();
 }
 /* Only FPGA needs to be mapped here. All others are done with ioremap */
 static struct map_desc omap_perseus2_io_desc[] __initdata = {
@@ -355,5 +355,5 @@ MACHINE_START(OMAP_PERSEUS2, "OMAP730 Perseus2")
 	.reserve	= omap_reserve,
 	.init_irq	= omap_perseus2_init_irq,
 	.init_machine	= omap_perseus2_init,
-	.timer		= &omap_timer,
+	.timer		= &omap1_timer,
 MACHINE_END

arch/arm/mach-omap1/board-sx1.c

@@ -411,7 +411,7 @@ static void __init omap_sx1_init(void)
 static void __init omap_sx1_init_irq(void)
 {
 	omap1_init_common_hw();
-	omap_init_irq();
+	omap1_init_irq();
 }
 /*----------------------------------------*/
 
@@ -426,5 +426,5 @@ MACHINE_START(SX1, "OMAP310 based Siemens SX1")
 	.reserve	= omap_reserve,
 	.init_irq	= omap_sx1_init_irq,
 	.init_machine	= omap_sx1_init,
-	.timer		= &omap_timer,
+	.timer		= &omap1_timer,
 MACHINE_END

arch/arm/mach-omap1/board-voiceblue.c

@@ -162,7 +162,7 @@ static struct omap_board_config_kernel voiceblue_config[] = {
 static void __init voiceblue_init_irq(void)
 {
 	omap1_init_common_hw();
-	omap_init_irq();
+	omap1_init_irq();
 }
 
 static void __init voiceblue_map_io(void)
@@ -306,5 +306,5 @@ MACHINE_START(VOICEBLUE, "VoiceBlue OMAP5910")
 	.reserve	= omap_reserve,
 	.init_irq	= voiceblue_init_irq,
 	.init_machine	= voiceblue_init,
-	.timer		= &omap_timer,
+	.timer		= &omap1_timer,
 MACHINE_END

arch/arm/mach-omap1/irq.c

@@ -175,7 +175,7 @@ static struct irq_chip omap_irq_chip = {
 	.irq_set_wake	= omap_wake_irq,
 };
 
-void __init omap_init_irq(void)
+void __init omap1_init_irq(void)
 {
 	int i, j;
 

arch/arm/mach-omap1/mcbsp.c

@@ -38,7 +38,7 @@ static void omap1_mcbsp_request(unsigned int id)
 	 * On 1510, 1610 and 1710, McBSP1 and McBSP3
 	 * are DSP public peripherals.
 	 */
-	if (id == OMAP_MCBSP1 || id == OMAP_MCBSP3) {
+	if (id == 0 || id == 2) {
 		if (dsp_use++ == 0) {
 			api_clk = clk_get(NULL, "api_ck");
 			dsp_clk = clk_get(NULL, "dsp_ck");
@@ -59,7 +59,7 @@ static void omap1_mcbsp_request(unsigned int id)
 
 static void omap1_mcbsp_free(unsigned int id)
 {
-	if (id == OMAP_MCBSP1 || id == OMAP_MCBSP3) {
+	if (id == 0 || id == 2) {
 		if (--dsp_use == 0) {
 			if (!IS_ERR(api_clk)) {
 				clk_disable(api_clk);

arch/arm/mach-omap1/time.c

@@ -297,7 +297,7 @@ static inline int omap_32k_timer_usable(void)
  * Timer initialization
  * ---------------------------------------------------------------------------
  */
-static void __init omap_timer_init(void)
+static void __init omap1_timer_init(void)
 {
 	if (omap_32k_timer_usable()) {
 		preferred_sched_clock_init(1);
@@ -307,6 +307,6 @@ static void __init omap_timer_init(void)
 	}
 }
 
-struct sys_timer omap_timer = {
-	.init		= omap_timer_init,
+struct sys_timer omap1_timer = {
+	.init		= omap1_timer_init,
 };

arch/arm/mach-omap1/timer32k.c

@@ -183,10 +183,6 @@ static __init void omap_init_32k_timer(void)
 bool __init omap_32k_timer_init(void)
 {
 	omap_init_clocksource_32k();
-
-#ifdef CONFIG_OMAP_DM_TIMER
-	omap_dm_timer_init();
-#endif
 	omap_init_32k_timer();
 
 	return true;

arch/arm/mach-omap2/Makefile

@@ -3,7 +3,7 @@
 #
 
 # Common support
-obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer-gp.o pm.o \
+obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer.o pm.o \
 	 common.o gpio.o dma.o wd_timer.o
 
 omap-2-3-common				= irq.o sdrc.o
@@ -145,9 +145,19 @@ obj-$(CONFIG_SOC_OMAP2420)		+= opp2420_data.o
 obj-$(CONFIG_SOC_OMAP2430)		+= opp2430_data.o
 
 # hwmod data
-obj-$(CONFIG_SOC_OMAP2420)		+= omap_hwmod_2420_data.o
-obj-$(CONFIG_SOC_OMAP2430)		+= omap_hwmod_2430_data.o
-obj-$(CONFIG_ARCH_OMAP3)		+= omap_hwmod_3xxx_data.o
+obj-$(CONFIG_SOC_OMAP2420)		+= omap_hwmod_2xxx_ipblock_data.o \
+					   omap_hwmod_2xxx_3xxx_ipblock_data.o \
+					   omap_hwmod_2xxx_interconnect_data.o \
+					   omap_hwmod_2xxx_3xxx_interconnect_data.o \
+					   omap_hwmod_2420_data.o
+obj-$(CONFIG_SOC_OMAP2430)		+= omap_hwmod_2xxx_ipblock_data.o \
+					   omap_hwmod_2xxx_3xxx_ipblock_data.o \
+					   omap_hwmod_2xxx_interconnect_data.o \
+					   omap_hwmod_2xxx_3xxx_interconnect_data.o \
+					   omap_hwmod_2430_data.o
+obj-$(CONFIG_ARCH_OMAP3)		+= omap_hwmod_2xxx_3xxx_ipblock_data.o \
+					   omap_hwmod_2xxx_3xxx_interconnect_data.o \
+					   omap_hwmod_3xxx_data.o
 obj-$(CONFIG_ARCH_OMAP4)		+= omap_hwmod_44xx_data.o
 
 # EMU peripherals
@@ -269,4 +279,4 @@ obj-$(CONFIG_ARCH_OMAP4)		+= hwspinlock.o
 disp-$(CONFIG_OMAP2_DSS)		:= display.o
 obj-y					+= $(disp-m) $(disp-y)
 
-obj-y					+= common-board-devices.o
+obj-y					+= common-board-devices.o twl-common.o

arch/arm/mach-omap2/board-2430sdp.c

@@ -260,7 +260,7 @@ MACHINE_START(OMAP_2430SDP, "OMAP2430 sdp2430 board")
 	.reserve	= omap_reserve,
 	.map_io		= omap_2430sdp_map_io,
 	.init_early	= omap_2430sdp_init_early,
-	.init_irq	= omap_init_irq,
+	.init_irq	= omap2_init_irq,
 	.init_machine	= omap_2430sdp_init,
-	.timer		= &omap_timer,
+	.timer		= &omap2_timer,
 MACHINE_END

arch/arm/mach-omap2/board-3430sdp.c

@@ -231,22 +231,6 @@ static void __init omap_3430sdp_init_early(void)
 	omap2_init_common_devices(hyb18m512160af6_sdrc_params, NULL);
 }
 
-static int sdp3430_batt_table[] = {
-/* 0 C*/
-30800, 29500, 28300, 27100,
-26000, 24900, 23900, 22900, 22000, 21100, 20300, 19400, 18700, 17900,
-17200, 16500, 15900, 15300, 14700, 14100, 13600, 13100, 12600, 12100,
-11600, 11200, 10800, 10400, 10000, 9630,   9280,   8950,   8620,   8310,
-8020,   7730,   7460,   7200,   6950,   6710,   6470,   6250,   6040,   5830,
-5640,   5450,   5260,   5090,   4920,   4760,   4600,   4450,   4310,   4170,
-4040,   3910,   3790,   3670,   3550
-};
-
-static struct twl4030_bci_platform_data sdp3430_bci_data = {
-	.battery_tmp_tbl	= sdp3430_batt_table,
-	.tblsize		= ARRAY_SIZE(sdp3430_batt_table),
-};
-
 static struct omap2_hsmmc_info mmc[] = {
 	{
 		.mmc		= 1,
@@ -292,14 +276,6 @@ static struct twl4030_gpio_platform_data sdp3430_gpio_data = {
 	.setup		= sdp3430_twl_gpio_setup,
 };
 
-static struct twl4030_usb_data sdp3430_usb_data = {
-	.usb_mode	= T2_USB_MODE_ULPI,
-};
-
-static struct twl4030_madc_platform_data sdp3430_madc_data = {
-	.irq_line	= 1,
-};
-
 /* regulator consumer mappings */
 
 /* ads7846 on SPI */
@@ -307,16 +283,6 @@ static struct regulator_consumer_supply sdp3430_vaux3_supplies[] = {
 	REGULATOR_SUPPLY("vcc", "spi1.0"),
 };
 
-static struct regulator_consumer_supply sdp3430_vdda_dac_supplies[] = {
-	REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"),
-};
-
-/* VPLL2 for digital video outputs */
-static struct regulator_consumer_supply sdp3430_vpll2_supplies[] = {
-	REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
-	REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
-};
-
 static struct regulator_consumer_supply sdp3430_vmmc1_supplies[] = {
 	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
 };
@@ -433,54 +399,10 @@ static struct regulator_init_data sdp3430_vsim = {
 	.consumer_supplies	= sdp3430_vsim_supplies,
 };
 
-/* VDAC for DSS driving S-Video */
-static struct regulator_init_data sdp3430_vdac = {
-	.constraints = {
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(sdp3430_vdda_dac_supplies),
-	.consumer_supplies	= sdp3430_vdda_dac_supplies,
-};
-
-static struct regulator_init_data sdp3430_vpll2 = {
-	.constraints = {
-		.name			= "VDVI",
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(sdp3430_vpll2_supplies),
-	.consumer_supplies	= sdp3430_vpll2_supplies,
-};
-
-static struct twl4030_codec_audio_data sdp3430_audio;
-
-static struct twl4030_codec_data sdp3430_codec = {
-	.audio_mclk = 26000000,
-	.audio = &sdp3430_audio,
-};
-
 static struct twl4030_platform_data sdp3430_twldata = {
-	.irq_base	= TWL4030_IRQ_BASE,
-	.irq_end	= TWL4030_IRQ_END,
-
 	/* platform_data for children goes here */
-	.bci		= &sdp3430_bci_data,
 	.gpio		= &sdp3430_gpio_data,
-	.madc		= &sdp3430_madc_data,
 	.keypad		= &sdp3430_kp_data,
-	.usb		= &sdp3430_usb_data,
-	.codec		= &sdp3430_codec,
 
 	.vaux1		= &sdp3430_vaux1,
 	.vaux2		= &sdp3430_vaux2,
@@ -489,14 +411,21 @@ static struct twl4030_platform_data sdp3430_twldata = {
 	.vmmc1		= &sdp3430_vmmc1,
 	.vmmc2		= &sdp3430_vmmc2,
 	.vsim		= &sdp3430_vsim,
-	.vdac		= &sdp3430_vdac,
-	.vpll2		= &sdp3430_vpll2,
 };
 
 static int __init omap3430_i2c_init(void)
 {
 	/* i2c1 for PMIC only */
+	omap3_pmic_get_config(&sdp3430_twldata,
+			TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_BCI |
+			TWL_COMMON_PDATA_MADC | TWL_COMMON_PDATA_AUDIO,
+			TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
+	sdp3430_twldata.vdac->constraints.apply_uV = true;
+	sdp3430_twldata.vpll2->constraints.apply_uV = true;
+	sdp3430_twldata.vpll2->constraints.name = "VDVI";
+
 	omap3_pmic_init("twl4030", &sdp3430_twldata);
+
 	/* i2c2 on camera connector (for sensor control) and optional isp1301 */
 	omap_register_i2c_bus(2, 400, NULL, 0);
 	/* i2c3 on display connector (for DVI, tfp410) */
@@ -804,7 +733,7 @@ MACHINE_START(OMAP_3430SDP, "OMAP3430 3430SDP board")
 	.reserve	= omap_reserve,
 	.map_io		= omap3_map_io,
 	.init_early	= omap_3430sdp_init_early,
-	.init_irq	= omap_init_irq,
+	.init_irq	= omap3_init_irq,
 	.init_machine	= omap_3430sdp_init,
-	.timer		= &omap_timer,
+	.timer		= &omap3_timer,
 MACHINE_END

arch/arm/mach-omap2/board-3630sdp.c

@@ -219,7 +219,7 @@ MACHINE_START(OMAP_3630SDP, "OMAP 3630SDP board")
 	.reserve	= omap_reserve,
 	.map_io		= omap3_map_io,
 	.init_early	= omap_sdp_init_early,
-	.init_irq	= omap_init_irq,
+	.init_irq	= omap3_init_irq,
 	.init_machine	= omap_sdp_init,
-	.timer		= &omap_timer,
+	.timer		= &omap3_timer,
 MACHINE_END

arch/arm/mach-omap2/board-4430sdp.c

@@ -40,7 +40,6 @@
 
 #include "mux.h"
 #include "hsmmc.h"
-#include "timer-gp.h"
 #include "control.h"
 #include "common-board-devices.h"
 
@@ -295,9 +294,6 @@ static void __init omap_4430sdp_init_early(void)
 {
 	omap2_init_common_infrastructure();
 	omap2_init_common_devices(NULL, NULL);
-#ifdef CONFIG_OMAP_32K_TIMER
-	omap2_gp_clockevent_set_gptimer(1);
-#endif
 }
 
 static struct omap_musb_board_data musb_board_data = {
@@ -306,14 +302,6 @@ static struct omap_musb_board_data musb_board_data = {
 	.power			= 100,
 };
 
-static struct twl4030_usb_data omap4_usbphy_data = {
-	.phy_init	= omap4430_phy_init,
-	.phy_exit	= omap4430_phy_exit,
-	.phy_power	= omap4430_phy_power,
-	.phy_set_clock	= omap4430_phy_set_clk,
-	.phy_suspend	= omap4430_phy_suspend,
-};
-
 static struct omap2_hsmmc_info mmc[] = {
 	{
 		.mmc		= 2,
@@ -333,16 +321,7 @@ static struct omap2_hsmmc_info mmc[] = {
 };
 
 static struct regulator_consumer_supply sdp4430_vaux_supply[] = {
-	{
-		.supply = "vmmc",
-		.dev_name = "omap_hsmmc.1",
-	},
-};
-static struct regulator_consumer_supply sdp4430_vmmc_supply[] = {
-	{
-		.supply = "vmmc",
-		.dev_name = "omap_hsmmc.0",
-	},
+	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"),
 };
 
 static int omap4_twl6030_hsmmc_late_init(struct device *dev)
@@ -399,65 +378,10 @@ static struct regulator_init_data sdp4430_vaux1 = {
 					| REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies  = 1,
+	.num_consumer_supplies  = ARRAY_SIZE(sdp4430_vaux_supply),
 	.consumer_supplies      = sdp4430_vaux_supply,
 };
 
-static struct regulator_init_data sdp4430_vaux2 = {
-	.constraints = {
-		.min_uV			= 1200000,
-		.max_uV			= 2800000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask	 = REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-};
-
-static struct regulator_init_data sdp4430_vaux3 = {
-	.constraints = {
-		.min_uV			= 1000000,
-		.max_uV			= 3000000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask	 = REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-};
-
-/* VMMC1 for MMC1 card */
-static struct regulator_init_data sdp4430_vmmc = {
-	.constraints = {
-		.min_uV			= 1200000,
-		.max_uV			= 3000000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask	 = REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies  = 1,
-	.consumer_supplies      = sdp4430_vmmc_supply,
-};
-
-static struct regulator_init_data sdp4430_vpp = {
-	.constraints = {
-		.min_uV			= 1800000,
-		.max_uV			= 2500000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask	 = REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-};
-
 static struct regulator_init_data sdp4430_vusim = {
 	.constraints = {
 		.min_uV			= 1200000,
@@ -471,74 +395,10 @@ static struct regulator_init_data sdp4430_vusim = {
 	},
 };
 
-static struct regulator_init_data sdp4430_vana = {
-	.constraints = {
-		.min_uV			= 2100000,
-		.max_uV			= 2100000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask	 = REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-};
-
-static struct regulator_init_data sdp4430_vcxio = {
-	.constraints = {
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask	 = REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-};
-
-static struct regulator_init_data sdp4430_vdac = {
-	.constraints = {
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask	 = REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-};
-
-static struct regulator_init_data sdp4430_vusb = {
-	.constraints = {
-		.min_uV			= 3300000,
-		.max_uV			= 3300000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask	 =	REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-};
-
-static struct regulator_init_data sdp4430_clk32kg = {
-	.constraints = {
-		.valid_ops_mask		= REGULATOR_CHANGE_STATUS,
-	},
-};
-
 static struct twl4030_platform_data sdp4430_twldata = {
-	.irq_base	= TWL6030_IRQ_BASE,
-	.irq_end	= TWL6030_IRQ_END,
-
 	/* Regulators */
-	.vmmc		= &sdp4430_vmmc,
-	.vpp		= &sdp4430_vpp,
 	.vusim		= &sdp4430_vusim,
-	.vana		= &sdp4430_vana,
-	.vcxio		= &sdp4430_vcxio,
-	.vdac		= &sdp4430_vdac,
-	.vusb		= &sdp4430_vusb,
 	.vaux1		= &sdp4430_vaux1,
-	.vaux2		= &sdp4430_vaux2,
-	.vaux3		= &sdp4430_vaux3,
-	.clk32kg	= &sdp4430_clk32kg,
-	.usb		= &omap4_usbphy_data
 };
 
 static struct i2c_board_info __initdata sdp4430_i2c_3_boardinfo[] = {
@@ -556,6 +416,16 @@ static struct i2c_board_info __initdata sdp4430_i2c_4_boardinfo[] = {
 };
 static int __init omap4_i2c_init(void)
 {
+	omap4_pmic_get_config(&sdp4430_twldata, TWL_COMMON_PDATA_USB,
+			TWL_COMMON_REGULATOR_VDAC |
+			TWL_COMMON_REGULATOR_VAUX2 |
+			TWL_COMMON_REGULATOR_VAUX3 |
+			TWL_COMMON_REGULATOR_VMMC |
+			TWL_COMMON_REGULATOR_VPP |
+			TWL_COMMON_REGULATOR_VANA |
+			TWL_COMMON_REGULATOR_VCXIO |
+			TWL_COMMON_REGULATOR_VUSB |
+			TWL_COMMON_REGULATOR_CLK32KG);
 	omap4_pmic_init("twl6030", &sdp4430_twldata);
 	omap_register_i2c_bus(2, 400, NULL, 0);
 	omap_register_i2c_bus(3, 400, sdp4430_i2c_3_boardinfo,
@@ -773,5 +643,5 @@ MACHINE_START(OMAP_4430SDP, "OMAP4430 4430SDP board")
 	.init_early	= omap_4430sdp_init_early,
 	.init_irq	= gic_init_irq,
 	.init_machine	= omap_4430sdp_init,
-	.timer		= &omap_timer,
+	.timer		= &omap4_timer,
 MACHINE_END

arch/arm/mach-omap2/board-am3517crane.c

@@ -104,7 +104,7 @@ MACHINE_START(CRANEBOARD, "AM3517/05 CRANEBOARD")
 	.reserve	= omap_reserve,
 	.map_io		= omap3_map_io,
 	.init_early	= am3517_crane_init_early,
-	.init_irq	= omap_init_irq,
+	.init_irq	= omap3_init_irq,
 	.init_machine	= am3517_crane_init,
-	.timer		= &omap_timer,
+	.timer		= &omap3_timer,
 MACHINE_END

arch/arm/mach-omap2/board-am3517evm.c

@@ -494,7 +494,7 @@ MACHINE_START(OMAP3517EVM, "OMAP3517/AM3517 EVM")
 	.reserve	= omap_reserve,
 	.map_io		= omap3_map_io,
 	.init_early	= am3517_evm_init_early,
-	.init_irq	= omap_init_irq,
+	.init_irq	= omap3_init_irq,
 	.init_machine	= am3517_evm_init,
-	.timer		= &omap_timer,
+	.timer		= &omap3_timer,
 MACHINE_END

arch/arm/mach-omap2/board-apollon.c

@@ -354,7 +354,7 @@ MACHINE_START(OMAP_APOLLON, "OMAP24xx Apollon")
 	.reserve	= omap_reserve,
 	.map_io		= omap_apollon_map_io,
 	.init_early	= omap_apollon_init_early,
-	.init_irq	= omap_init_irq,
+	.init_irq	= omap2_init_irq,
 	.init_machine	= omap_apollon_init,
-	.timer		= &omap_timer,
+	.timer		= &omap2_timer,
 MACHINE_END

arch/arm/mach-omap2/board-cm-t35.c

@@ -162,9 +162,7 @@ static struct mtd_partition cm_t35_nand_partitions[] = {
 static struct omap_nand_platform_data cm_t35_nand_data = {
 	.parts			= cm_t35_nand_partitions,
 	.nr_parts		= ARRAY_SIZE(cm_t35_nand_partitions),
-	.dma_channel		= -1,	/* disable DMA in OMAP NAND driver */
 	.cs			= 0,
-
 };
 
 static void __init cm_t35_init_nand(void)
@@ -337,19 +335,17 @@ static void __init cm_t35_init_display(void)
 	}
 }
 
-static struct regulator_consumer_supply cm_t35_vmmc1_supply = {
-	.supply			= "vmmc",
+static struct regulator_consumer_supply cm_t35_vmmc1_supply[] = {
+	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
 };
 
-static struct regulator_consumer_supply cm_t35_vsim_supply = {
-	.supply			= "vmmc_aux",
+static struct regulator_consumer_supply cm_t35_vsim_supply[] = {
+	REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"),
 };
 
-static struct regulator_consumer_supply cm_t35_vdac_supply =
-	REGULATOR_SUPPLY("vdda_dac", "omapdss_venc");
-
-static struct regulator_consumer_supply cm_t35_vdvi_supply =
-	REGULATOR_SUPPLY("vdvi", "omapdss");
+static struct regulator_consumer_supply cm_t35_vdvi_supply[] = {
+	REGULATOR_SUPPLY("vdvi", "omapdss"),
+};
 
 /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
 static struct regulator_init_data cm_t35_vmmc1 = {
@@ -362,8 +358,8 @@ static struct regulator_init_data cm_t35_vmmc1 = {
 					| REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &cm_t35_vmmc1_supply,
+	.num_consumer_supplies	= ARRAY_SIZE(cm_t35_vmmc1_supply),
+	.consumer_supplies	= cm_t35_vmmc1_supply,
 };
 
 /* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */
@@ -377,41 +373,8 @@ static struct regulator_init_data cm_t35_vsim = {
 					| REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &cm_t35_vsim_supply,
-};
-
-/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */
-static struct regulator_init_data cm_t35_vdac = {
-	.constraints = {
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &cm_t35_vdac_supply,
-};
-
-/* VPLL2 for digital video outputs */
-static struct regulator_init_data cm_t35_vpll2 = {
-	.constraints = {
-		.name			= "VDVI",
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &cm_t35_vdvi_supply,
-};
-
-static struct twl4030_usb_data cm_t35_usb_data = {
-	.usb_mode	= T2_USB_MODE_ULPI,
+	.num_consumer_supplies	= ARRAY_SIZE(cm_t35_vsim_supply),
+	.consumer_supplies	= cm_t35_vsim_supply,
 };
 
 static uint32_t cm_t35_keymap[] = {
@@ -481,10 +444,6 @@ static int cm_t35_twl_gpio_setup(struct device *dev, unsigned gpio,
 	mmc[0].gpio_cd = gpio + 0;
 	omap2_hsmmc_init(mmc);
 
-	/* link regulators to MMC adapters */
-	cm_t35_vmmc1_supply.dev = mmc[0].dev;
-	cm_t35_vsim_supply.dev = mmc[0].dev;
-
 	return 0;
 }
 
@@ -496,21 +455,23 @@ static struct twl4030_gpio_platform_data cm_t35_gpio_data = {
 };
 
 static struct twl4030_platform_data cm_t35_twldata = {
-	.irq_base	= TWL4030_IRQ_BASE,
-	.irq_end	= TWL4030_IRQ_END,
-
 	/* platform_data for children goes here */
 	.keypad		= &cm_t35_kp_data,
-	.usb		= &cm_t35_usb_data,
 	.gpio		= &cm_t35_gpio_data,
 	.vmmc1		= &cm_t35_vmmc1,
 	.vsim		= &cm_t35_vsim,
-	.vdac		= &cm_t35_vdac,
-	.vpll2		= &cm_t35_vpll2,
 };
 
 static void __init cm_t35_init_i2c(void)
 {
+	omap3_pmic_get_config(&cm_t35_twldata, TWL_COMMON_PDATA_USB,
+			TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
+
+	cm_t35_twldata.vpll2->constraints.name = "VDVI";
+	cm_t35_twldata.vpll2->num_consumer_supplies =
+						ARRAY_SIZE(cm_t35_vdvi_supply);
+	cm_t35_twldata.vpll2->consumer_supplies = cm_t35_vdvi_supply;
+
 	omap3_pmic_init("tps65930", &cm_t35_twldata);
 }
 
@@ -646,7 +607,7 @@ MACHINE_START(CM_T35, "Compulab CM-T35")
 	.reserve	= omap_reserve,
 	.map_io		= omap3_map_io,
 	.init_early	= cm_t35_init_early,
-	.init_irq	= omap_init_irq,
+	.init_irq	= omap3_init_irq,
 	.init_machine	= cm_t35_init,
-	.timer		= &omap_timer,
+	.timer		= &omap3_timer,
 MACHINE_END

arch/arm/mach-omap2/board-cm-t3517.c

@@ -236,7 +236,6 @@ static struct mtd_partition cm_t3517_nand_partitions[] = {
 static struct omap_nand_platform_data cm_t3517_nand_data = {
 	.parts			= cm_t3517_nand_partitions,
 	.nr_parts		= ARRAY_SIZE(cm_t3517_nand_partitions),
-	.dma_channel		= -1,	/* disable DMA in OMAP NAND driver */
 	.cs			= 0,
 };
 
@@ -304,7 +303,7 @@ MACHINE_START(CM_T3517, "Compulab CM-T3517")
 	.reserve        = omap_reserve,
 	.map_io		= omap3_map_io,
 	.init_early	= cm_t3517_init_early,
-	.init_irq	= omap_init_irq,
+	.init_irq	= omap3_init_irq,
 	.init_machine	= cm_t3517_init,
-	.timer		= &omap_timer,
+	.timer		= &omap3_timer,
 MACHINE_END

arch/arm/mach-omap2/board-devkit8000.c

@@ -58,7 +58,6 @@
 
 #include "mux.h"
 #include "hsmmc.h"
-#include "timer-gp.h"
 #include "common-board-devices.h"
 
 #define OMAP_DM9000_GPIO_IRQ	25
@@ -130,13 +129,14 @@ static void devkit8000_panel_disable_dvi(struct omap_dss_device *dssdev)
 		gpio_set_value_cansleep(dssdev->reset_gpio, 0);
 }
 
-static struct regulator_consumer_supply devkit8000_vmmc1_supply =
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0");
-
+static struct regulator_consumer_supply devkit8000_vmmc1_supply[] = {
+	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
+};
 
 /* ads7846 on SPI */
-static struct regulator_consumer_supply devkit8000_vio_supply =
-	REGULATOR_SUPPLY("vcc", "spi2.0");
+static struct regulator_consumer_supply devkit8000_vio_supply[] = {
+	REGULATOR_SUPPLY("vcc", "spi2.0"),
+};
 
 static struct panel_generic_dpi_data lcd_panel = {
 	.name			= "generic",
@@ -186,9 +186,6 @@ static struct omap_dss_board_info devkit8000_dss_data = {
 	.default_device = &devkit8000_lcd_device,
 };
 
-static struct regulator_consumer_supply devkit8000_vdda_dac_supply =
-	REGULATOR_SUPPLY("vdda_dac", "omapdss_venc");
-
 static uint32_t board_keymap[] = {
 	KEY(0, 0, KEY_1),
 	KEY(1, 0, KEY_2),
@@ -284,22 +281,8 @@ static struct regulator_init_data devkit8000_vmmc1 = {
 					| REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &devkit8000_vmmc1_supply,
-};
-
-/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */
-static struct regulator_init_data devkit8000_vdac = {
-	.constraints = {
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &devkit8000_vdda_dac_supply,
+	.num_consumer_supplies	= ARRAY_SIZE(devkit8000_vmmc1_supply),
+	.consumer_supplies	= devkit8000_vmmc1_supply,
 };
 
 /* VPLL1 for digital video outputs */
@@ -327,31 +310,14 @@ static struct regulator_init_data devkit8000_vio = {
 		.valid_ops_mask         = REGULATOR_CHANGE_MODE
 			| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies  = 1,
-	.consumer_supplies      = &devkit8000_vio_supply,
-};
-
-static struct twl4030_usb_data devkit8000_usb_data = {
-	.usb_mode	= T2_USB_MODE_ULPI,
-};
-
-static struct twl4030_codec_audio_data devkit8000_audio_data;
-
-static struct twl4030_codec_data devkit8000_codec_data = {
-	.audio_mclk = 26000000,
-	.audio = &devkit8000_audio_data,
+	.num_consumer_supplies  = ARRAY_SIZE(devkit8000_vio_supply),
+	.consumer_supplies      = devkit8000_vio_supply,
 };
 
 static struct twl4030_platform_data devkit8000_twldata = {
-	.irq_base	= TWL4030_IRQ_BASE,
-	.irq_end	= TWL4030_IRQ_END,
-
 	/* platform_data for children goes here */
-	.usb		= &devkit8000_usb_data,
 	.gpio		= &devkit8000_gpio_data,
-	.codec		= &devkit8000_codec_data,
 	.vmmc1		= &devkit8000_vmmc1,
-	.vdac		= &devkit8000_vdac,
 	.vpll1		= &devkit8000_vpll1,
 	.vio		= &devkit8000_vio,
 	.keypad		= &devkit8000_kp_data,
@@ -359,6 +325,9 @@ static struct twl4030_platform_data devkit8000_twldata = {
 
 static int __init devkit8000_i2c_init(void)
 {
+	omap3_pmic_get_config(&devkit8000_twldata,
+			  TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO,
+			  TWL_COMMON_REGULATOR_VDAC);
 	omap3_pmic_init("tps65930", &devkit8000_twldata);
 	/* Bus 3 is attached to the DVI port where devices like the pico DLP
 	 * projector don't work reliably with 400kHz */
@@ -438,10 +407,7 @@ static void __init devkit8000_init_early(void)
 
 static void __init devkit8000_init_irq(void)
 {
-	omap_init_irq();
-#ifdef CONFIG_OMAP_32K_TIMER
-	omap2_gp_clockevent_set_gptimer(12);
-#endif
+	omap3_init_irq();
 }
 
 #define OMAP_DM9000_BASE	0x2c000000
@@ -707,5 +673,5 @@ MACHINE_START(DEVKIT8000, "OMAP3 Devkit8000")
 	.init_early	= devkit8000_init_early,
 	.init_irq	= devkit8000_init_irq,
 	.init_machine	= devkit8000_init,
-	.timer		= &omap_timer,
+	.timer		= &omap3_secure_timer,
 MACHINE_END

arch/arm/mach-omap2/board-flash.c

@@ -132,11 +132,7 @@ static struct gpmc_timings nand_timings = {
 };
 
 static struct omap_nand_platform_data board_nand_data = {
-	.nand_setup	= NULL,
 	.gpmc_t		= &nand_timings,
-	.dma_channel	= -1,		/* disable DMA in OMAP NAND driver */
-	.dev_ready	= NULL,
-	.devsize	= 0,	/* '0' for 8-bit, '1' for 16-bit device */
 };
 
 void

arch/arm/mach-omap2/board-generic.c

@@ -70,7 +70,7 @@ MACHINE_START(OMAP_GENERIC, "Generic OMAP24xx")
 	.reserve	= omap_reserve,
 	.map_io		= omap_generic_map_io,
 	.init_early	= omap_generic_init_early,
-	.init_irq	= omap_init_irq,
+	.init_irq	= omap2_init_irq,
 	.init_machine	= omap_generic_init,
-	.timer		= &omap_timer,
+	.timer		= &omap2_timer,
 MACHINE_END

arch/arm/mach-omap2/board-h4.c

@@ -298,7 +298,7 @@ static void __init omap_h4_init_early(void)
 
 static void __init omap_h4_init_irq(void)
 {
-	omap_init_irq();
+	omap2_init_irq();
 }
 
 static struct at24_platform_data m24c01 = {
@@ -388,5 +388,5 @@ MACHINE_START(OMAP_H4, "OMAP2420 H4 board")
 	.init_early	= omap_h4_init_early,
 	.init_irq	= omap_h4_init_irq,
 	.init_machine	= omap_h4_init,
-	.timer		= &omap_timer,
+	.timer		= &omap2_timer,
 MACHINE_END

arch/arm/mach-omap2/board-igep0020.c

@@ -222,8 +222,9 @@ static inline void __init igep2_init_smsc911x(void)
 static inline void __init igep2_init_smsc911x(void) { }
 #endif
 
-static struct regulator_consumer_supply igep_vmmc1_supply =
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0");
+static struct regulator_consumer_supply igep_vmmc1_supply[] = {
+	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
+};
 
 /* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */
 static struct regulator_init_data igep_vmmc1 = {
@@ -236,12 +237,13 @@ static struct regulator_init_data igep_vmmc1 = {
 					| REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies  = 1,
-	.consumer_supplies      = &igep_vmmc1_supply,
+	.num_consumer_supplies  = ARRAY_SIZE(igep_vmmc1_supply),
+	.consumer_supplies      = igep_vmmc1_supply,
 };
 
-static struct regulator_consumer_supply igep_vio_supply =
-	REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.1");
+static struct regulator_consumer_supply igep_vio_supply[] = {
+	REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.1"),
+};
 
 static struct regulator_init_data igep_vio = {
 	.constraints = {
@@ -254,20 +256,21 @@ static struct regulator_init_data igep_vio = {
 					| REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies  = 1,
-	.consumer_supplies      = &igep_vio_supply,
+	.num_consumer_supplies  = ARRAY_SIZE(igep_vio_supply),
+	.consumer_supplies      = igep_vio_supply,
 };
 
-static struct regulator_consumer_supply igep_vmmc2_supply =
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1");
+static struct regulator_consumer_supply igep_vmmc2_supply[] = {
+	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"),
+};
 
 static struct regulator_init_data igep_vmmc2 = {
 	.constraints		= {
 		.valid_modes_mask	= REGULATOR_MODE_NORMAL,
 		.always_on		= 1,
 	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &igep_vmmc2_supply,
+	.num_consumer_supplies	= ARRAY_SIZE(igep_vmmc2_supply),
+	.consumer_supplies	= igep_vmmc2_supply,
 };
 
 static struct fixed_voltage_config igep_vwlan = {
@@ -440,10 +443,6 @@ static struct twl4030_gpio_platform_data igep_twl4030_gpio_pdata = {
 	.setup		= igep_twl_gpio_setup,
 };
 
-static struct twl4030_usb_data igep_usb_data = {
-	.usb_mode	= T2_USB_MODE_ULPI,
-};
-
 static int igep2_enable_dvi(struct omap_dss_device *dssdev)
 {
 	gpio_direction_output(IGEP2_GPIO_DVI_PUP, 1);
@@ -480,26 +479,6 @@ static struct omap_dss_board_info igep2_dss_data = {
 	.default_device	= &igep2_dvi_device,
 };
 
-static struct regulator_consumer_supply igep2_vpll2_supplies[] = {
-	REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
-	REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
-};
-
-static struct regulator_init_data igep2_vpll2 = {
-	.constraints = {
-		.name			= "VDVI",
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(igep2_vpll2_supplies),
-	.consumer_supplies	= igep2_vpll2_supplies,
-};
-
 static void __init igep2_display_init(void)
 {
 	int err = gpio_request_one(IGEP2_GPIO_DVI_PUP, GPIOF_OUT_INIT_HIGH,
@@ -519,13 +498,6 @@ static void __init igep_init_early(void)
 				  m65kxxxxam_sdrc_params);
 }
 
-static struct twl4030_codec_audio_data igep2_audio_data;
-
-static struct twl4030_codec_data igep2_codec_data = {
-	.audio_mclk = 26000000,
-	.audio = &igep2_audio_data,
-};
-
 static int igep2_keymap[] = {
 	KEY(0, 0, KEY_LEFT),
 	KEY(0, 1, KEY_RIGHT),
@@ -558,11 +530,7 @@ static struct twl4030_keypad_data igep2_keypad_pdata = {
 };
 
 static struct twl4030_platform_data igep_twldata = {
-	.irq_base	= TWL4030_IRQ_BASE,
-	.irq_end	= TWL4030_IRQ_END,
-
 	/* platform_data for children goes here */
-	.usb		= &igep_usb_data,
 	.gpio		= &igep_twl4030_gpio_pdata,
 	.vmmc1          = &igep_vmmc1,
 	.vio		= &igep_vio,
@@ -578,6 +546,8 @@ static void __init igep_i2c_init(void)
 {
 	int ret;
 
+	omap3_pmic_get_config(&igep_twldata, TWL_COMMON_PDATA_USB, 0);
+
 	if (machine_is_igep0020()) {
 		/*
 		 * Bus 3 is attached to the DVI port where devices like the
@@ -588,9 +558,12 @@ static void __init igep_i2c_init(void)
 		if (ret)
 			pr_warning("IGEP2: Could not register I2C3 bus (%d)\n", ret);
 
-		igep_twldata.codec	= &igep2_codec_data;
 		igep_twldata.keypad	= &igep2_keypad_pdata;
-		igep_twldata.vpll2	= &igep2_vpll2;
+		/* Get common pmic data */
+		omap3_pmic_get_config(&igep_twldata, TWL_COMMON_PDATA_AUDIO,
+				      TWL_COMMON_REGULATOR_VPLL2);
+		igep_twldata.vpll2->constraints.apply_uV = true;
+		igep_twldata.vpll2->constraints.name = "VDVI";
 	}
 
 	omap3_pmic_init("twl4030", &igep_twldata);
@@ -703,9 +676,9 @@ MACHINE_START(IGEP0020, "IGEP v2 board")
 	.reserve	= omap_reserve,
 	.map_io		= omap3_map_io,
 	.init_early	= igep_init_early,
-	.init_irq	= omap_init_irq,
+	.init_irq	= omap3_init_irq,
 	.init_machine	= igep_init,
-	.timer		= &omap_timer,
+	.timer		= &omap3_timer,
 MACHINE_END
 
 MACHINE_START(IGEP0030, "IGEP OMAP3 module")
@@ -713,7 +686,7 @@ MACHINE_START(IGEP0030, "IGEP OMAP3 module")
 	.reserve	= omap_reserve,
 	.map_io		= omap3_map_io,
 	.init_early	= igep_init_early,
-	.init_irq	= omap_init_irq,
+	.init_irq	= omap3_init_irq,
 	.init_machine	= igep_init,
-	.timer		= &omap_timer,
+	.timer		= &omap3_timer,
 MACHINE_END

arch/arm/mach-omap2/board-ldp.c

@@ -199,22 +199,14 @@ static void __init omap_ldp_init_early(void)
 	omap2_init_common_devices(NULL, NULL);
 }
 
-static struct twl4030_usb_data ldp_usb_data = {
-	.usb_mode	= T2_USB_MODE_ULPI,
-};
-
 static struct twl4030_gpio_platform_data ldp_gpio_data = {
 	.gpio_base	= OMAP_MAX_GPIO_LINES,
 	.irq_base	= TWL4030_GPIO_IRQ_BASE,
 	.irq_end	= TWL4030_GPIO_IRQ_END,
 };
 
-static struct twl4030_madc_platform_data ldp_madc_data = {
-	.irq_line	= 1,
-};
-
-static struct regulator_consumer_supply ldp_vmmc1_supply = {
-	.supply			= "vmmc",
+static struct regulator_consumer_supply ldp_vmmc1_supply[] = {
+	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
 };
 
 /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
@@ -228,8 +220,8 @@ static struct regulator_init_data ldp_vmmc1 = {
 					| REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &ldp_vmmc1_supply,
+	.num_consumer_supplies	= ARRAY_SIZE(ldp_vmmc1_supply),
+	.consumer_supplies	= ldp_vmmc1_supply,
 };
 
 /* ads7846 on SPI */
@@ -253,12 +245,7 @@ static struct regulator_init_data ldp_vaux1 = {
 };
 
 static struct twl4030_platform_data ldp_twldata = {
-	.irq_base	= TWL4030_IRQ_BASE,
-	.irq_end	= TWL4030_IRQ_END,
-
 	/* platform_data for children goes here */
-	.madc		= &ldp_madc_data,
-	.usb		= &ldp_usb_data,
 	.vmmc1		= &ldp_vmmc1,
 	.vaux1		= &ldp_vaux1,
 	.gpio		= &ldp_gpio_data,
@@ -267,6 +254,8 @@ static struct twl4030_platform_data ldp_twldata = {
 
 static int __init omap_i2c_init(void)
 {
+	omap3_pmic_get_config(&ldp_twldata,
+			  TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC, 0);
 	omap3_pmic_init("twl4030", &ldp_twldata);
 	omap_register_i2c_bus(2, 400, NULL, 0);
 	omap_register_i2c_bus(3, 400, NULL, 0);
@@ -341,8 +330,6 @@ static void __init omap_ldp_init(void)
 		ARRAY_SIZE(ldp_nand_partitions), ZOOM_NAND_CS, 0);
 
 	omap2_hsmmc_init(mmc);
-	/* link regulators to MMC adapters */
-	ldp_vmmc1_supply.dev = mmc[0].dev;
 }
 
 MACHINE_START(OMAP_LDP, "OMAP LDP board")
@@ -350,7 +337,7 @@ MACHINE_START(OMAP_LDP, "OMAP LDP board")
 	.reserve	= omap_reserve,
 	.map_io		= omap3_map_io,
 	.init_early	= omap_ldp_init_early,
-	.init_irq	= omap_init_irq,
+	.init_irq	= omap3_init_irq,
 	.init_machine	= omap_ldp_init,
-	.timer		= &omap_timer,
+	.timer		= &omap3_timer,
 MACHINE_END

arch/arm/mach-omap2/board-n8x0.c

@@ -699,9 +699,9 @@ MACHINE_START(NOKIA_N800, "Nokia N800")
 	.reserve	= omap_reserve,
 	.map_io		= n8x0_map_io,
 	.init_early	= n8x0_init_early,
-	.init_irq	= omap_init_irq,
+	.init_irq	= omap2_init_irq,
 	.init_machine	= n8x0_init_machine,
-	.timer		= &omap_timer,
+	.timer		= &omap2_timer,
 MACHINE_END
 
 MACHINE_START(NOKIA_N810, "Nokia N810")
@@ -709,9 +709,9 @@ MACHINE_START(NOKIA_N810, "Nokia N810")
 	.reserve	= omap_reserve,
 	.map_io		= n8x0_map_io,
 	.init_early	= n8x0_init_early,
-	.init_irq	= omap_init_irq,
+	.init_irq	= omap2_init_irq,
 	.init_machine	= n8x0_init_machine,
-	.timer		= &omap_timer,
+	.timer		= &omap2_timer,
 MACHINE_END
 
 MACHINE_START(NOKIA_N810_WIMAX, "Nokia N810 WiMAX")
@@ -719,7 +719,7 @@ MACHINE_START(NOKIA_N810_WIMAX, "Nokia N810 WiMAX")
 	.reserve	= omap_reserve,
 	.map_io		= n8x0_map_io,
 	.init_early	= n8x0_init_early,
-	.init_irq	= omap_init_irq,
+	.init_irq	= omap2_init_irq,
 	.init_machine	= n8x0_init_machine,
-	.timer		= &omap_timer,
+	.timer		= &omap2_timer,
 MACHINE_END

arch/arm/mach-omap2/board-omap3beagle.c

@@ -50,7 +50,6 @@
 
 #include "mux.h"
 #include "hsmmc.h"
-#include "timer-gp.h"
 #include "pm.h"
 #include "common-board-devices.h"
 
@@ -210,14 +209,6 @@ static struct omap_dss_board_info beagle_dss_data = {
 	.default_device = &beagle_dvi_device,
 };
 
-static struct regulator_consumer_supply beagle_vdac_supply =
-	REGULATOR_SUPPLY("vdda_dac", "omapdss_venc");
-
-static struct regulator_consumer_supply beagle_vdvi_supplies[] = {
-	REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
-	REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
-};
-
 static void __init beagle_display_init(void)
 {
 	int r;
@@ -239,12 +230,12 @@ static struct omap2_hsmmc_info mmc[] = {
 	{}	/* Terminator */
 };
 
-static struct regulator_consumer_supply beagle_vmmc1_supply = {
-	.supply			= "vmmc",
+static struct regulator_consumer_supply beagle_vmmc1_supply[] = {
+	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
 };
 
-static struct regulator_consumer_supply beagle_vsim_supply = {
-	.supply			= "vmmc_aux",
+static struct regulator_consumer_supply beagle_vsim_supply[] = {
+	REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"),
 };
 
 static struct gpio_led gpio_leds[];
@@ -267,10 +258,6 @@ static int beagle_twl_gpio_setup(struct device *dev,
 	mmc[0].gpio_cd = gpio + 0;
 	omap2_hsmmc_init(mmc);
 
-	/* link regulators to MMC adapters */
-	beagle_vmmc1_supply.dev = mmc[0].dev;
-	beagle_vsim_supply.dev = mmc[0].dev;
-
 	/*
 	 * TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, XM active
 	 * high / others active low)
@@ -336,8 +323,8 @@ static struct regulator_init_data beagle_vmmc1 = {
 					| REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &beagle_vmmc1_supply,
+	.num_consumer_supplies	= ARRAY_SIZE(beagle_vmmc1_supply),
+	.consumer_supplies	= beagle_vmmc1_supply,
 };
 
 /* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */
@@ -351,62 +338,15 @@ static struct regulator_init_data beagle_vsim = {
 					| REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &beagle_vsim_supply,
-};
-
-/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */
-static struct regulator_init_data beagle_vdac = {
-	.constraints = {
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &beagle_vdac_supply,
-};
-
-/* VPLL2 for digital video outputs */
-static struct regulator_init_data beagle_vpll2 = {
-	.constraints = {
-		.name			= "VDVI",
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(beagle_vdvi_supplies),
-	.consumer_supplies	= beagle_vdvi_supplies,
-};
-
-static struct twl4030_usb_data beagle_usb_data = {
-	.usb_mode	= T2_USB_MODE_ULPI,
-};
-
-static struct twl4030_codec_audio_data beagle_audio_data;
-
-static struct twl4030_codec_data beagle_codec_data = {
-	.audio_mclk = 26000000,
-	.audio = &beagle_audio_data,
+	.num_consumer_supplies	= ARRAY_SIZE(beagle_vsim_supply),
+	.consumer_supplies	= beagle_vsim_supply,
 };
 
 static struct twl4030_platform_data beagle_twldata = {
-	.irq_base	= TWL4030_IRQ_BASE,
-	.irq_end	= TWL4030_IRQ_END,
-
 	/* platform_data for children goes here */
-	.usb		= &beagle_usb_data,
 	.gpio		= &beagle_gpio_data,
-	.codec		= &beagle_codec_data,
 	.vmmc1		= &beagle_vmmc1,
 	.vsim		= &beagle_vsim,
-	.vdac		= &beagle_vdac,
-	.vpll2		= &beagle_vpll2,
 };
 
 static struct i2c_board_info __initdata beagle_i2c_eeprom[] = {
@@ -417,6 +357,12 @@ static struct i2c_board_info __initdata beagle_i2c_eeprom[] = {
 
 static int __init omap3_beagle_i2c_init(void)
 {
+	omap3_pmic_get_config(&beagle_twldata,
+			TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO,
+			TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
+
+	beagle_twldata.vpll2->constraints.name = "VDVI";
+
 	omap3_pmic_init("twl4030", &beagle_twldata);
 	/* Bus 3 is attached to the DVI port where devices like the pico DLP
 	 * projector don't work reliably with 400kHz */
@@ -486,10 +432,7 @@ static void __init omap3_beagle_init_early(void)
 
 static void __init omap3_beagle_init_irq(void)
 {
-	omap_init_irq();
-#ifdef CONFIG_OMAP_32K_TIMER
-	omap2_gp_clockevent_set_gptimer(12);
-#endif
+	omap3_init_irq();
 }
 
 static struct platform_device *omap3_beagle_devices[] __initdata = {
@@ -599,5 +542,5 @@ MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board")
 	.init_early	= omap3_beagle_init_early,
 	.init_irq	= omap3_beagle_init_irq,
 	.init_machine	= omap3_beagle_init,
-	.timer		= &omap_timer,
+	.timer		= &omap3_secure_timer,
 MACHINE_END

arch/arm/mach-omap2/board-omap3evm.c

@@ -273,12 +273,12 @@ static struct omap_dss_board_info omap3_evm_dss_data = {
 	.default_device	= &omap3_evm_lcd_device,
 };
 
-static struct regulator_consumer_supply omap3evm_vmmc1_supply = {
-	.supply			= "vmmc",
+static struct regulator_consumer_supply omap3evm_vmmc1_supply[] = {
+	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
 };
 
-static struct regulator_consumer_supply omap3evm_vsim_supply = {
-	.supply			= "vmmc_aux",
+static struct regulator_consumer_supply omap3evm_vsim_supply[] = {
+	REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"),
 };
 
 /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
@@ -292,8 +292,8 @@ static struct regulator_init_data omap3evm_vmmc1 = {
 					| REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &omap3evm_vmmc1_supply,
+	.num_consumer_supplies	= ARRAY_SIZE(omap3evm_vmmc1_supply),
+	.consumer_supplies	= omap3evm_vmmc1_supply,
 };
 
 /* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */
@@ -307,8 +307,8 @@ static struct regulator_init_data omap3evm_vsim = {
 					| REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &omap3evm_vsim_supply,
+	.num_consumer_supplies	= ARRAY_SIZE(omap3evm_vsim_supply),
+	.consumer_supplies	= omap3evm_vsim_supply,
 };
 
 static struct omap2_hsmmc_info mmc[] = {
@@ -365,10 +365,6 @@ static int omap3evm_twl_gpio_setup(struct device *dev,
 	mmc[0].gpio_cd = gpio + 0;
 	omap2_hsmmc_init(mmc);
 
-	/* link regulators to MMC adapters */
-	omap3evm_vmmc1_supply.dev = mmc[0].dev;
-	omap3evm_vsim_supply.dev = mmc[0].dev;
-
 	/*
 	 * Most GPIOs are for USB OTG.  Some are mostly sent to
 	 * the P2 connector; notably LEDA for the LCD backlight.
@@ -400,10 +396,6 @@ static struct twl4030_gpio_platform_data omap3evm_gpio_data = {
 	.setup		= omap3evm_twl_gpio_setup,
 };
 
-static struct twl4030_usb_data omap3evm_usb_data = {
-	.usb_mode	= T2_USB_MODE_ULPI,
-};
-
 static uint32_t board_keymap[] = {
 	KEY(0, 0, KEY_LEFT),
 	KEY(0, 1, KEY_DOWN),
@@ -438,58 +430,10 @@ static struct twl4030_keypad_data omap3evm_kp_data = {
 	.rep		= 1,
 };
 
-static struct twl4030_madc_platform_data omap3evm_madc_data = {
-	.irq_line	= 1,
-};
-
-static struct twl4030_codec_audio_data omap3evm_audio_data;
-
-static struct twl4030_codec_data omap3evm_codec_data = {
-	.audio_mclk = 26000000,
-	.audio = &omap3evm_audio_data,
-};
-
-static struct regulator_consumer_supply omap3_evm_vdda_dac_supply =
-	REGULATOR_SUPPLY("vdda_dac", "omapdss_venc");
-
-/* VDAC for DSS driving S-Video */
-static struct regulator_init_data omap3_evm_vdac = {
-	.constraints = {
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &omap3_evm_vdda_dac_supply,
-};
-
-/* VPLL2 for digital video outputs */
-static struct regulator_consumer_supply omap3_evm_vpll2_supplies[] = {
-	REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
-	REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
-};
-
-static struct regulator_init_data omap3_evm_vpll2 = {
-	.constraints = {
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(omap3_evm_vpll2_supplies),
-	.consumer_supplies	= omap3_evm_vpll2_supplies,
-};
-
 /* ads7846 on SPI */
-static struct regulator_consumer_supply omap3evm_vio_supply =
-	REGULATOR_SUPPLY("vcc", "spi1.0");
+static struct regulator_consumer_supply omap3evm_vio_supply[] = {
+	REGULATOR_SUPPLY("vcc", "spi1.0"),
+};
 
 /* VIO for ads7846 */
 static struct regulator_init_data omap3evm_vio = {
@@ -502,8 +446,8 @@ static struct regulator_init_data omap3evm_vio = {
 		.valid_ops_mask		= REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &omap3evm_vio_supply,
+	.num_consumer_supplies	= ARRAY_SIZE(omap3evm_vio_supply),
+	.consumer_supplies	= omap3evm_vio_supply,
 };
 
 #ifdef CONFIG_WL12XX_PLATFORM_DATA
@@ -511,16 +455,17 @@ static struct regulator_init_data omap3evm_vio = {
 #define OMAP3EVM_WLAN_PMENA_GPIO	(150)
 #define OMAP3EVM_WLAN_IRQ_GPIO		(149)
 
-static struct regulator_consumer_supply omap3evm_vmmc2_supply =
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1");
+static struct regulator_consumer_supply omap3evm_vmmc2_supply[] = {
+	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"),
+};
 
 /* VMMC2 for driving the WL12xx module */
 static struct regulator_init_data omap3evm_vmmc2 = {
 	.constraints = {
 		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies = &omap3evm_vmmc2_supply,
+	.num_consumer_supplies	= ARRAY_SIZE(omap3evm_vmmc2_supply),
+	.consumer_supplies	= omap3evm_vmmc2_supply,
 };
 
 static struct fixed_voltage_config omap3evm_vwlan = {
@@ -548,17 +493,9 @@ struct wl12xx_platform_data omap3evm_wlan_data __initdata = {
 #endif
 
 static struct twl4030_platform_data omap3evm_twldata = {
-	.irq_base	= TWL4030_IRQ_BASE,
-	.irq_end	= TWL4030_IRQ_END,
-
 	/* platform_data for children goes here */
 	.keypad		= &omap3evm_kp_data,
-	.madc		= &omap3evm_madc_data,
-	.usb		= &omap3evm_usb_data,
 	.gpio		= &omap3evm_gpio_data,
-	.codec		= &omap3evm_codec_data,
-	.vdac		= &omap3_evm_vdac,
-	.vpll2		= &omap3_evm_vpll2,
 	.vio		= &omap3evm_vio,
 	.vmmc1		= &omap3evm_vmmc1,
 	.vsim		= &omap3evm_vsim,
@@ -566,6 +503,14 @@ static struct twl4030_platform_data omap3evm_twldata = {
 
 static int __init omap3_evm_i2c_init(void)
 {
+	omap3_pmic_get_config(&omap3evm_twldata,
+			TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC |
+			TWL_COMMON_PDATA_AUDIO,
+			TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
+
+	omap3evm_twldata.vdac->constraints.apply_uV = true;
+	omap3evm_twldata.vpll2->constraints.apply_uV = true;
+
 	omap3_pmic_init("twl4030", &omap3evm_twldata);
 	omap_register_i2c_bus(2, 400, NULL, 0);
 	omap_register_i2c_bus(3, 400, NULL, 0);
@@ -740,7 +685,7 @@ MACHINE_START(OMAP3EVM, "OMAP3 EVM")
 	.reserve	= omap_reserve,
 	.map_io		= omap3_map_io,
 	.init_early	= omap3_evm_init_early,
-	.init_irq	= omap_init_irq,
+	.init_irq	= omap3_init_irq,
 	.init_machine	= omap3_evm_init,
-	.timer		= &omap_timer,
+	.timer		= &omap3_timer,
 MACHINE_END

arch/arm/mach-omap2/board-omap3logic.c

@@ -35,7 +35,6 @@
 
 #include "mux.h"
 #include "hsmmc.h"
-#include "timer-gp.h"
 #include "control.h"
 #include "common-board-devices.h"
 
@@ -55,8 +54,8 @@
 #define OMAP3_TORPEDO_MMC_GPIO_CD		127
 #define OMAP3_TORPEDO_SMSC911X_GPIO_IRQ		129
 
-static struct regulator_consumer_supply omap3logic_vmmc1_supply = {
-	.supply			= "vmmc",
+static struct regulator_consumer_supply omap3logic_vmmc1_supply[] = {
+	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
 };
 
 /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
@@ -71,8 +70,8 @@ static struct regulator_init_data omap3logic_vmmc1 = {
 					| REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies  = 1,
-	.consumer_supplies      = &omap3logic_vmmc1_supply,
+	.num_consumer_supplies  = ARRAY_SIZE(omap3logic_vmmc1_supply),
+	.consumer_supplies      = omap3logic_vmmc1_supply,
 };
 
 static struct twl4030_gpio_platform_data omap3logic_gpio_data = {
@@ -130,8 +129,6 @@ static void __init board_mmc_init(void)
 	}
 
 	omap2_hsmmc_init(board_mmc_info);
-	/* link regulators to MMC adapters */
-	omap3logic_vmmc1_supply.dev = board_mmc_info[0].dev;
 }
 
 static struct omap_smsc911x_platform_data __initdata board_smsc911x_data = {
@@ -215,16 +212,16 @@ MACHINE_START(OMAP3_TORPEDO, "Logic OMAP3 Torpedo board")
 	.boot_params	= 0x80000100,
 	.map_io		= omap3_map_io,
 	.init_early	= omap3logic_init_early,
-	.init_irq	= omap_init_irq,
+	.init_irq	= omap3_init_irq,
 	.init_machine	= omap3logic_init,
-	.timer		= &omap_timer,
+	.timer		= &omap3_timer,
 MACHINE_END
 
 MACHINE_START(OMAP3530_LV_SOM, "OMAP Logic 3530 LV SOM board")
 	.boot_params	= 0x80000100,
 	.map_io		= omap3_map_io,
 	.init_early	= omap3logic_init_early,
-	.init_irq	= omap_init_irq,
+	.init_irq	= omap3_init_irq,
 	.init_machine	= omap3logic_init,
-	.timer		= &omap_timer,
+	.timer		= &omap3_timer,
 MACHINE_END

arch/arm/mach-omap2/board-omap3pandora.c

@@ -320,17 +320,17 @@ static struct twl4030_gpio_platform_data omap3pandora_gpio_data = {
 	.setup		= omap3pandora_twl_gpio_setup,
 };
 
-static struct regulator_consumer_supply pandora_vmmc1_supply =
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0");
-
-static struct regulator_consumer_supply pandora_vmmc2_supply =
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1");
+static struct regulator_consumer_supply pandora_vmmc1_supply[] = {
+	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
+};
 
-static struct regulator_consumer_supply pandora_vmmc3_supply =
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.2");
+static struct regulator_consumer_supply pandora_vmmc2_supply[] = {
+	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1")
+};
 
-static struct regulator_consumer_supply pandora_vdda_dac_supply =
-	REGULATOR_SUPPLY("vdda_dac", "omapdss_venc");
+static struct regulator_consumer_supply pandora_vmmc3_supply[] = {
+	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.2"),
+};
 
 static struct regulator_consumer_supply pandora_vdds_supplies[] = {
 	REGULATOR_SUPPLY("vdds_sdi", "omapdss"),
@@ -338,11 +338,13 @@ static struct regulator_consumer_supply pandora_vdds_supplies[] = {
 	REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
 };
 
-static struct regulator_consumer_supply pandora_vcc_lcd_supply =
-	REGULATOR_SUPPLY("vcc", "display0");
+static struct regulator_consumer_supply pandora_vcc_lcd_supply[] = {
+	REGULATOR_SUPPLY("vcc", "display0"),
+};
 
-static struct regulator_consumer_supply pandora_usb_phy_supply =
-	REGULATOR_SUPPLY("hsusb0", "ehci-omap.0");
+static struct regulator_consumer_supply pandora_usb_phy_supply[] = {
+	REGULATOR_SUPPLY("hsusb0", "ehci-omap.0"),
+};
 
 /* ads7846 on SPI and 2 nub controllers on I2C */
 static struct regulator_consumer_supply pandora_vaux4_supplies[] = {
@@ -351,8 +353,9 @@ static struct regulator_consumer_supply pandora_vaux4_supplies[] = {
 	REGULATOR_SUPPLY("vcc", "3-0067"),
 };
 
-static struct regulator_consumer_supply pandora_adac_supply =
-	REGULATOR_SUPPLY("vcc", "soc-audio");
+static struct regulator_consumer_supply pandora_adac_supply[] = {
+	REGULATOR_SUPPLY("vcc", "soc-audio"),
+};
 
 /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
 static struct regulator_init_data pandora_vmmc1 = {
@@ -365,8 +368,8 @@ static struct regulator_init_data pandora_vmmc1 = {
 					| REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &pandora_vmmc1_supply,
+	.num_consumer_supplies	= ARRAY_SIZE(pandora_vmmc1_supply),
+	.consumer_supplies	= pandora_vmmc1_supply,
 };
 
 /* VMMC2 for MMC2 pins CMD, CLK, DAT0..DAT3 (max 100 mA) */
@@ -380,38 +383,8 @@ static struct regulator_init_data pandora_vmmc2 = {
 					| REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &pandora_vmmc2_supply,
-};
-
-/* VDAC for DSS driving S-Video */
-static struct regulator_init_data pandora_vdac = {
-	.constraints = {
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &pandora_vdda_dac_supply,
-};
-
-/* VPLL2 for digital video outputs */
-static struct regulator_init_data pandora_vpll2 = {
-	.constraints = {
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(pandora_vdds_supplies),
-	.consumer_supplies	= pandora_vdds_supplies,
+	.num_consumer_supplies	= ARRAY_SIZE(pandora_vmmc2_supply),
+	.consumer_supplies	= pandora_vmmc2_supply,
 };
 
 /* VAUX1 for LCD */
@@ -425,8 +398,8 @@ static struct regulator_init_data pandora_vaux1 = {
 		.valid_ops_mask		= REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &pandora_vcc_lcd_supply,
+	.num_consumer_supplies	= ARRAY_SIZE(pandora_vcc_lcd_supply),
+	.consumer_supplies	= pandora_vcc_lcd_supply,
 };
 
 /* VAUX2 for USB host PHY */
@@ -440,8 +413,8 @@ static struct regulator_init_data pandora_vaux2 = {
 		.valid_ops_mask		= REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &pandora_usb_phy_supply,
+	.num_consumer_supplies	= ARRAY_SIZE(pandora_usb_phy_supply),
+	.consumer_supplies	= pandora_usb_phy_supply,
 };
 
 /* VAUX4 for ads7846 and nubs */
@@ -470,8 +443,8 @@ static struct regulator_init_data pandora_vsim = {
 		.valid_ops_mask		= REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &pandora_adac_supply,
+	.num_consumer_supplies	= ARRAY_SIZE(pandora_adac_supply),
+	.consumer_supplies	= pandora_adac_supply,
 };
 
 /* Fixed regulator internal to Wifi module */
@@ -479,8 +452,8 @@ static struct regulator_init_data pandora_vmmc3 = {
 	.constraints = {
 		.valid_ops_mask		= REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &pandora_vmmc3_supply,
+	.num_consumer_supplies	= ARRAY_SIZE(pandora_vmmc3_supply),
+	.consumer_supplies	= pandora_vmmc3_supply,
 };
 
 static struct fixed_voltage_config pandora_vwlan = {
@@ -501,29 +474,12 @@ static struct platform_device pandora_vwlan_device = {
 	},
 };
 
-static struct twl4030_usb_data omap3pandora_usb_data = {
-	.usb_mode	= T2_USB_MODE_ULPI,
-};
-
-static struct twl4030_codec_audio_data omap3pandora_audio_data;
-
-static struct twl4030_codec_data omap3pandora_codec_data = {
-	.audio_mclk = 26000000,
-	.audio = &omap3pandora_audio_data,
-};
-
 static struct twl4030_bci_platform_data pandora_bci_data;
 
 static struct twl4030_platform_data omap3pandora_twldata = {
-	.irq_base	= TWL4030_IRQ_BASE,
-	.irq_end	= TWL4030_IRQ_END,
 	.gpio		= &omap3pandora_gpio_data,
-	.usb		= &omap3pandora_usb_data,
-	.codec		= &omap3pandora_codec_data,
 	.vmmc1		= &pandora_vmmc1,
 	.vmmc2		= &pandora_vmmc2,
-	.vdac		= &pandora_vdac,
-	.vpll2		= &pandora_vpll2,
 	.vaux1		= &pandora_vaux1,
 	.vaux2		= &pandora_vaux2,
 	.vaux4		= &pandora_vaux4,
@@ -541,6 +497,17 @@ static struct i2c_board_info __initdata omap3pandora_i2c3_boardinfo[] = {
 
 static int __init omap3pandora_i2c_init(void)
 {
+	omap3_pmic_get_config(&omap3pandora_twldata,
+			TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO,
+			TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
+
+	omap3pandora_twldata.vdac->constraints.apply_uV = true;
+
+	omap3pandora_twldata.vpll2->constraints.apply_uV = true;
+	omap3pandora_twldata.vpll2->num_consumer_supplies =
+					ARRAY_SIZE(pandora_vdds_supplies);
+	omap3pandora_twldata.vpll2->consumer_supplies = pandora_vdds_supplies;
+
 	omap3_pmic_init("tps65950", &omap3pandora_twldata);
 	/* i2c2 pins are not connected */
 	omap_register_i2c_bus(3, 100, omap3pandora_i2c3_boardinfo,
@@ -643,7 +610,7 @@ MACHINE_START(OMAP3_PANDORA, "Pandora Handheld Console")
 	.reserve	= omap_reserve,
 	.map_io		= omap3_map_io,
 	.init_early	= omap3pandora_init_early,
-	.init_irq	= omap_init_irq,
+	.init_irq	= omap3_init_irq,
 	.init_machine	= omap3pandora_init,
-	.timer		= &omap_timer,
+	.timer		= &omap3_timer,
 MACHINE_END

arch/arm/mach-omap2/board-omap3stalker.c

@@ -52,7 +52,6 @@
 #include "sdram-micron-mt46h32m32lf-6.h"
 #include "mux.h"
 #include "hsmmc.h"
-#include "timer-gp.h"
 #include "common-board-devices.h"
 
 #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
@@ -206,12 +205,12 @@ static struct omap_dss_board_info omap3_stalker_dss_data = {
 	.default_device	= &omap3_stalker_dvi_device,
 };
 
-static struct regulator_consumer_supply omap3stalker_vmmc1_supply = {
-	.supply		= "vmmc",
+static struct regulator_consumer_supply omap3stalker_vmmc1_supply[] = {
+	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
 };
 
-static struct regulator_consumer_supply omap3stalker_vsim_supply = {
-	.supply		= "vmmc_aux",
+static struct regulator_consumer_supply omap3stalker_vsim_supply[] = {
+	REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"),
 };
 
 /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
@@ -224,8 +223,8 @@ static struct regulator_init_data omap3stalker_vmmc1 = {
 		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
 		| REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &omap3stalker_vmmc1_supply,
+	.num_consumer_supplies	= ARRAY_SIZE(omap3stalker_vmmc1_supply),
+	.consumer_supplies	= omap3stalker_vmmc1_supply,
 };
 
 /* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */
@@ -238,8 +237,8 @@ static struct regulator_init_data omap3stalker_vsim = {
 		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
 		| REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &omap3stalker_vsim_supply,
+	.num_consumer_supplies	= ARRAY_SIZE(omap3stalker_vsim_supply),
+	.consumer_supplies	= omap3stalker_vsim_supply,
 };
 
 static struct omap2_hsmmc_info mmc[] = {
@@ -321,10 +320,6 @@ omap3stalker_twl_gpio_setup(struct device *dev,
 	mmc[0].gpio_cd = gpio + 0;
 	omap2_hsmmc_init(mmc);
 
-	/* link regulators to MMC adapters */
-	omap3stalker_vmmc1_supply.dev = mmc[0].dev;
-	omap3stalker_vsim_supply.dev = mmc[0].dev;
-
 	/*
 	 * Most GPIOs are for USB OTG.  Some are mostly sent to
 	 * the P2 connector; notably LEDA for the LCD backlight.
@@ -354,10 +349,6 @@ static struct twl4030_gpio_platform_data omap3stalker_gpio_data = {
 	.setup		= omap3stalker_twl_gpio_setup,
 };
 
-static struct twl4030_usb_data omap3stalker_usb_data = {
-	.usb_mode	= T2_USB_MODE_ULPI,
-};
-
 static uint32_t board_keymap[] = {
 	KEY(0, 0, KEY_LEFT),
 	KEY(0, 1, KEY_DOWN),
@@ -392,68 +383,10 @@ static struct twl4030_keypad_data omap3stalker_kp_data = {
 	.rep		= 1,
 };
 
-static struct twl4030_madc_platform_data omap3stalker_madc_data = {
-	.irq_line	= 1,
-};
-
-static struct twl4030_codec_audio_data omap3stalker_audio_data;
-
-static struct twl4030_codec_data omap3stalker_codec_data = {
-	.audio_mclk	= 26000000,
-	.audio		= &omap3stalker_audio_data,
-};
-
-static struct regulator_consumer_supply omap3_stalker_vdda_dac_supply =
-	REGULATOR_SUPPLY("vdda_dac", "omapdss_venc");
-
-/* VDAC for DSS driving S-Video */
-static struct regulator_init_data omap3_stalker_vdac = {
-	.constraints		= {
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-		| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-		| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &omap3_stalker_vdda_dac_supply,
-};
-
-/* VPLL2 for digital video outputs */
-static struct regulator_consumer_supply omap3_stalker_vpll2_supplies[] = {
-	REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
-	REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
-};
-
-static struct regulator_init_data omap3_stalker_vpll2 = {
-	.constraints		= {
-		.name			= "VDVI",
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.apply_uV = true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-		| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-		| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(omap3_stalker_vpll2_supplies),
-	.consumer_supplies	= omap3_stalker_vpll2_supplies,
-};
-
 static struct twl4030_platform_data omap3stalker_twldata = {
-	.irq_base	= TWL4030_IRQ_BASE,
-	.irq_end	= TWL4030_IRQ_END,
-
 	/* platform_data for children goes here */
 	.keypad		= &omap3stalker_kp_data,
-	.madc		= &omap3stalker_madc_data,
-	.usb		= &omap3stalker_usb_data,
 	.gpio		= &omap3stalker_gpio_data,
-	.codec		= &omap3stalker_codec_data,
-	.vdac		= &omap3_stalker_vdac,
-	.vpll2		= &omap3_stalker_vpll2,
 	.vmmc1		= &omap3stalker_vmmc1,
 	.vsim		= &omap3stalker_vsim,
 };
@@ -474,6 +407,15 @@ static struct i2c_board_info __initdata omap3stalker_i2c_boardinfo3[] = {
 
 static int __init omap3_stalker_i2c_init(void)
 {
+	omap3_pmic_get_config(&omap3stalker_twldata,
+			TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC |
+			TWL_COMMON_PDATA_AUDIO,
+			TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
+
+	omap3stalker_twldata.vdac->constraints.apply_uV = true;
+	omap3stalker_twldata.vpll2->constraints.apply_uV = true;
+	omap3stalker_twldata.vpll2->constraints.name = "VDVI";
+
 	omap3_pmic_init("twl4030", &omap3stalker_twldata);
 	omap_register_i2c_bus(2, 400, NULL, 0);
 	omap_register_i2c_bus(3, 400, omap3stalker_i2c_boardinfo3,
@@ -494,10 +436,7 @@ static void __init omap3_stalker_init_early(void)
 
 static void __init omap3_stalker_init_irq(void)
 {
-	omap_init_irq();
-#ifdef CONFIG_OMAP_32K_TIMER
-	omap2_gp_clockevent_set_gptimer(12);
-#endif
+	omap3_init_irq();
 }
 
 static struct platform_device *omap3_stalker_devices[] __initdata = {
@@ -560,5 +499,5 @@ MACHINE_START(SBC3530, "OMAP3 STALKER")
 	.init_early		= omap3_stalker_init_early,
 	.init_irq		= omap3_stalker_init_irq,
 	.init_machine		= omap3_stalker_init,
-	.timer			= &omap_timer,
+	.timer			= &omap3_secure_timer,
 MACHINE_END

arch/arm/mach-omap2/board-omap3touchbook.c

@@ -51,7 +51,6 @@
 
 #include "mux.h"
 #include "hsmmc.h"
-#include "timer-gp.h"
 #include "common-board-devices.h"
 
 #include <asm/setup.h>
@@ -114,12 +113,12 @@ static struct omap_lcd_config omap3_touchbook_lcd_config __initdata = {
 	.ctrl_name	= "internal",
 };
 
-static struct regulator_consumer_supply touchbook_vmmc1_supply = {
-	.supply			= "vmmc",
+static struct regulator_consumer_supply touchbook_vmmc1_supply[] = {
+	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
 };
 
-static struct regulator_consumer_supply touchbook_vsim_supply = {
-	.supply			= "vmmc_aux",
+static struct regulator_consumer_supply touchbook_vsim_supply[] = {
+	REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"),
 };
 
 static struct gpio_led gpio_leds[];
@@ -137,10 +136,6 @@ static int touchbook_twl_gpio_setup(struct device *dev,
 	mmc[0].gpio_cd = gpio + 0;
 	omap2_hsmmc_init(mmc);
 
-	/* link regulators to MMC adapters */
-	touchbook_vmmc1_supply.dev = mmc[0].dev;
-	touchbook_vsim_supply.dev = mmc[0].dev;
-
 	/* REVISIT: need ehci-omap hooks for external VBUS
 	 * power switch and overcurrent detect
 	 */
@@ -167,14 +162,18 @@ static struct twl4030_gpio_platform_data touchbook_gpio_data = {
 	.setup		= touchbook_twl_gpio_setup,
 };
 
-static struct regulator_consumer_supply touchbook_vdac_supply = {
+static struct regulator_consumer_supply touchbook_vdac_supply[] = {
+{
 	.supply		= "vdac",
 	.dev		= &omap3_touchbook_lcd_device.dev,
+},
 };
 
-static struct regulator_consumer_supply touchbook_vdvi_supply = {
+static struct regulator_consumer_supply touchbook_vdvi_supply[] = {
+{
 	.supply		= "vdvi",
 	.dev		= &omap3_touchbook_lcd_device.dev,
+},
 };
 
 /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
@@ -188,8 +187,8 @@ static struct regulator_init_data touchbook_vmmc1 = {
 					| REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &touchbook_vmmc1_supply,
+	.num_consumer_supplies	= ARRAY_SIZE(touchbook_vmmc1_supply),
+	.consumer_supplies	= touchbook_vmmc1_supply,
 };
 
 /* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */
@@ -203,62 +202,15 @@ static struct regulator_init_data touchbook_vsim = {
 					| REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &touchbook_vsim_supply,
-};
-
-/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */
-static struct regulator_init_data touchbook_vdac = {
-	.constraints = {
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &touchbook_vdac_supply,
-};
-
-/* VPLL2 for digital video outputs */
-static struct regulator_init_data touchbook_vpll2 = {
-	.constraints = {
-		.name			= "VDVI",
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &touchbook_vdvi_supply,
-};
-
-static struct twl4030_usb_data touchbook_usb_data = {
-	.usb_mode	= T2_USB_MODE_ULPI,
-};
-
-static struct twl4030_codec_audio_data touchbook_audio_data;
-
-static struct twl4030_codec_data touchbook_codec_data = {
-	.audio_mclk = 26000000,
-	.audio = &touchbook_audio_data,
+	.num_consumer_supplies	= ARRAY_SIZE(touchbook_vsim_supply),
+	.consumer_supplies	= touchbook_vsim_supply,
 };
 
 static struct twl4030_platform_data touchbook_twldata = {
-	.irq_base	= TWL4030_IRQ_BASE,
-	.irq_end	= TWL4030_IRQ_END,
-
 	/* platform_data for children goes here */
-	.usb		= &touchbook_usb_data,
 	.gpio		= &touchbook_gpio_data,
-	.codec		= &touchbook_codec_data,
 	.vmmc1		= &touchbook_vmmc1,
 	.vsim		= &touchbook_vsim,
-	.vdac		= &touchbook_vdac,
-	.vpll2		= &touchbook_vpll2,
 };
 
 static struct i2c_board_info __initdata touchBook_i2c_boardinfo[] = {
@@ -270,8 +222,20 @@ static struct i2c_board_info __initdata touchBook_i2c_boardinfo[] = {
 static int __init omap3_touchbook_i2c_init(void)
 {
 	/* Standard TouchBook bus */
-	omap3_pmic_init("twl4030", &touchbook_twldata);
+	omap3_pmic_get_config(&touchbook_twldata,
+			TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO,
+			TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
+
+	touchbook_twldata.vdac->num_consumer_supplies =
+					ARRAY_SIZE(touchbook_vdac_supply);
+	touchbook_twldata.vdac->consumer_supplies = touchbook_vdac_supply;
 
+	touchbook_twldata.vpll2->constraints.name = "VDVI";
+	touchbook_twldata.vpll2->num_consumer_supplies =
+					ARRAY_SIZE(touchbook_vdvi_supply);
+	touchbook_twldata.vpll2->consumer_supplies = touchbook_vdvi_supply;
+
+	omap3_pmic_init("twl4030", &touchbook_twldata);
 	/* Additional TouchBook bus */
 	omap_register_i2c_bus(3, 100, touchBook_i2c_boardinfo,
 			ARRAY_SIZE(touchBook_i2c_boardinfo));
@@ -371,10 +335,7 @@ static void __init omap3_touchbook_init_early(void)
 
 static void __init omap3_touchbook_init_irq(void)
 {
-	omap_init_irq();
-#ifdef CONFIG_OMAP_32K_TIMER
-	omap2_gp_clockevent_set_gptimer(12);
-#endif
+	omap3_init_irq();
 }
 
 static struct platform_device *omap3_touchbook_devices[] __initdata = {
@@ -449,5 +410,5 @@ MACHINE_START(TOUCHBOOK, "OMAP3 touchbook Board")
 	.init_early	= omap3_touchbook_init_early,
 	.init_irq	= omap3_touchbook_init_irq,
 	.init_machine	= omap3_touchbook_init,
-	.timer		= &omap_timer,
+	.timer		= &omap3_secure_timer,
 MACHINE_END

arch/arm/mach-omap2/board-omap4panda.c

@@ -41,7 +41,6 @@
 #include <plat/usb.h>
 #include <plat/mmc.h>
 #include <video/omap-panel-generic-dpi.h>
-#include "timer-gp.h"
 
 #include "hsmmc.h"
 #include "control.h"
@@ -155,14 +154,6 @@ static struct omap_musb_board_data musb_board_data = {
 	.power			= 100,
 };
 
-static struct twl4030_usb_data omap4_usbphy_data = {
-	.phy_init	= omap4430_phy_init,
-	.phy_exit	= omap4430_phy_exit,
-	.phy_power	= omap4430_phy_power,
-	.phy_set_clock	= omap4430_phy_set_clk,
-	.phy_suspend	= omap4430_phy_suspend,
-};
-
 static struct omap2_hsmmc_info mmc[] = {
 	{
 		.mmc		= 1,
@@ -182,24 +173,16 @@ static struct omap2_hsmmc_info mmc[] = {
 	{}	/* Terminator */
 };
 
-static struct regulator_consumer_supply omap4_panda_vmmc_supply[] = {
-	{
-		.supply = "vmmc",
-		.dev_name = "omap_hsmmc.0",
-	},
-};
-
-static struct regulator_consumer_supply omap4_panda_vmmc5_supply = {
-	.supply = "vmmc",
-	.dev_name = "omap_hsmmc.4",
+static struct regulator_consumer_supply omap4_panda_vmmc5_supply[] = {
+	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.4"),
 };
 
 static struct regulator_init_data panda_vmmc5 = {
 	.constraints = {
 		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies = 1,
-	.consumer_supplies = &omap4_panda_vmmc5_supply,
+	.num_consumer_supplies = ARRAY_SIZE(omap4_panda_vmmc5_supply),
+	.consumer_supplies = omap4_panda_vmmc5_supply,
 };
 
 static struct fixed_voltage_config panda_vwlan = {
@@ -274,128 +257,8 @@ static int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers)
 	return 0;
 }
 
-static struct regulator_init_data omap4_panda_vaux2 = {
-	.constraints = {
-		.min_uV			= 1200000,
-		.max_uV			= 2800000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask	 = REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-};
-
-static struct regulator_init_data omap4_panda_vaux3 = {
-	.constraints = {
-		.min_uV			= 1000000,
-		.max_uV			= 3000000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask	 = REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-};
-
-/* VMMC1 for MMC1 card */
-static struct regulator_init_data omap4_panda_vmmc = {
-	.constraints = {
-		.min_uV			= 1200000,
-		.max_uV			= 3000000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask	 = REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies  = 1,
-	.consumer_supplies      = omap4_panda_vmmc_supply,
-};
-
-static struct regulator_init_data omap4_panda_vpp = {
-	.constraints = {
-		.min_uV			= 1800000,
-		.max_uV			= 2500000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask	 = REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-};
-
-static struct regulator_init_data omap4_panda_vana = {
-	.constraints = {
-		.min_uV			= 2100000,
-		.max_uV			= 2100000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask	 = REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-};
-
-static struct regulator_init_data omap4_panda_vcxio = {
-	.constraints = {
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask	 = REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-};
-
-static struct regulator_init_data omap4_panda_vdac = {
-	.constraints = {
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask	 = REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-};
-
-static struct regulator_init_data omap4_panda_vusb = {
-	.constraints = {
-		.min_uV			= 3300000,
-		.max_uV			= 3300000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask	 =	REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-};
-
-static struct regulator_init_data omap4_panda_clk32kg = {
-	.constraints = {
-		.valid_ops_mask		= REGULATOR_CHANGE_STATUS,
-	},
-};
-
-static struct twl4030_platform_data omap4_panda_twldata = {
-	.irq_base	= TWL6030_IRQ_BASE,
-	.irq_end	= TWL6030_IRQ_END,
-
-	/* Regulators */
-	.vmmc		= &omap4_panda_vmmc,
-	.vpp		= &omap4_panda_vpp,
-	.vana		= &omap4_panda_vana,
-	.vcxio		= &omap4_panda_vcxio,
-	.vdac		= &omap4_panda_vdac,
-	.vusb		= &omap4_panda_vusb,
-	.vaux2		= &omap4_panda_vaux2,
-	.vaux3		= &omap4_panda_vaux3,
-	.clk32kg	= &omap4_panda_clk32kg,
-	.usb		= &omap4_usbphy_data,
-};
+/* Panda board uses the common PMIC configuration */
+static struct twl4030_platform_data omap4_panda_twldata;
 
 /*
  * Display monitor features are burnt in their EEPROM as EDID data. The EEPROM
@@ -409,6 +272,16 @@ static struct i2c_board_info __initdata panda_i2c_eeprom[] = {
 
 static int __init omap4_panda_i2c_init(void)
 {
+	omap4_pmic_get_config(&omap4_panda_twldata, TWL_COMMON_PDATA_USB,
+			TWL_COMMON_REGULATOR_VDAC |
+			TWL_COMMON_REGULATOR_VAUX2 |
+			TWL_COMMON_REGULATOR_VAUX3 |
+			TWL_COMMON_REGULATOR_VMMC |
+			TWL_COMMON_REGULATOR_VPP |
+			TWL_COMMON_REGULATOR_VANA |
+			TWL_COMMON_REGULATOR_VCXIO |
+			TWL_COMMON_REGULATOR_VUSB |
+			TWL_COMMON_REGULATOR_CLK32KG);
 	omap4_pmic_init("twl6030", &omap4_panda_twldata);
 	omap_register_i2c_bus(2, 400, NULL, 0);
 	/*
@@ -716,5 +589,5 @@ MACHINE_START(OMAP4_PANDA, "OMAP4 Panda board")
 	.init_early	= omap4_panda_init_early,
 	.init_irq	= gic_init_irq,
 	.init_machine	= omap4_panda_init,
-	.timer		= &omap_timer,
+	.timer		= &omap4_timer,
 MACHINE_END

arch/arm/mach-omap2/board-overo.c

@@ -74,15 +74,16 @@
 	defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
 
 /* fixed regulator for ads7846 */
-static struct regulator_consumer_supply ads7846_supply =
-	REGULATOR_SUPPLY("vcc", "spi1.0");
+static struct regulator_consumer_supply ads7846_supply[] = {
+	REGULATOR_SUPPLY("vcc", "spi1.0"),
+};
 
 static struct regulator_init_data vads7846_regulator = {
 	.constraints = {
 		.valid_ops_mask		= REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &ads7846_supply,
+	.num_consumer_supplies	= ARRAY_SIZE(ads7846_supply),
+	.consumer_supplies	= ads7846_supply,
 };
 
 static struct fixed_voltage_config vads7846 = {
@@ -264,14 +265,6 @@ static struct omap_dss_board_info overo_dss_data = {
 	.default_device	= &overo_dvi_device,
 };
 
-static struct regulator_consumer_supply overo_vdda_dac_supply =
-	REGULATOR_SUPPLY("vdda_dac", "omapdss_venc");
-
-static struct regulator_consumer_supply overo_vdds_dsi_supply[] = {
-	REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
-	REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
-};
-
 static struct mtd_partition overo_nand_partitions[] = {
 	{
 		.name           = "xloader",
@@ -319,8 +312,8 @@ static struct omap2_hsmmc_info mmc[] = {
 	{}	/* Terminator */
 };
 
-static struct regulator_consumer_supply overo_vmmc1_supply = {
-	.supply			= "vmmc",
+static struct regulator_consumer_supply overo_vmmc1_supply[] = {
+	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
 };
 
 #if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
@@ -415,8 +408,6 @@ static int overo_twl_gpio_setup(struct device *dev,
 {
 	omap2_hsmmc_init(mmc);
 
-	overo_vmmc1_supply.dev = mmc[0].dev;
-
 #if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
 	/* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
 	gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
@@ -433,10 +424,6 @@ static struct twl4030_gpio_platform_data overo_gpio_data = {
 	.setup		= overo_twl_gpio_setup,
 };
 
-static struct twl4030_usb_data overo_usb_data = {
-	.usb_mode	= T2_USB_MODE_ULPI,
-};
-
 static struct regulator_init_data overo_vmmc1 = {
 	.constraints = {
 		.min_uV			= 1850000,
@@ -447,59 +434,23 @@ static struct regulator_init_data overo_vmmc1 = {
 					| REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &overo_vmmc1_supply,
-};
-
-/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */
-static struct regulator_init_data overo_vdac = {
-	.constraints = {
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &overo_vdda_dac_supply,
-};
-
-/* VPLL2 for digital video outputs */
-static struct regulator_init_data overo_vpll2 = {
-	.constraints = {
-		.name			= "VDVI",
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(overo_vdds_dsi_supply),
-	.consumer_supplies	= overo_vdds_dsi_supply,
-};
-
-static struct twl4030_codec_audio_data overo_audio_data;
-
-static struct twl4030_codec_data overo_codec_data = {
-	.audio_mclk = 26000000,
-	.audio = &overo_audio_data,
+	.num_consumer_supplies	= ARRAY_SIZE(overo_vmmc1_supply),
+	.consumer_supplies	= overo_vmmc1_supply,
 };
 
 static struct twl4030_platform_data overo_twldata = {
-	.irq_base	= TWL4030_IRQ_BASE,
-	.irq_end	= TWL4030_IRQ_END,
 	.gpio		= &overo_gpio_data,
-	.usb		= &overo_usb_data,
-	.codec		= &overo_codec_data,
 	.vmmc1		= &overo_vmmc1,
-	.vdac		= &overo_vdac,
-	.vpll2		= &overo_vpll2,
 };
 
 static int __init overo_i2c_init(void)
 {
+	omap3_pmic_get_config(&overo_twldata,
+			TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO,
+			TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
+
+	overo_twldata.vpll2->constraints.name = "VDVI";
+
 	omap3_pmic_init("tps65950", &overo_twldata);
 	/* i2c2 pins are used for gpio */
 	omap_register_i2c_bus(3, 400, NULL, 0);
@@ -615,7 +566,7 @@ MACHINE_START(OVERO, "Gumstix Overo")
 	.reserve	= omap_reserve,
 	.map_io		= omap3_map_io,
 	.init_early	= overo_init_early,
-	.init_irq	= omap_init_irq,
+	.init_irq	= omap3_init_irq,
 	.init_machine	= overo_init,
-	.timer		= &omap_timer,
+	.timer		= &omap3_timer,
 MACHINE_END

arch/arm/mach-omap2/board-rm680.c

@@ -79,20 +79,14 @@ static struct twl4030_gpio_platform_data rm680_gpio_data = {
 	.pulldowns		= BIT(1) | BIT(2) | BIT(8) | BIT(15),
 };
 
-static struct twl4030_usb_data rm680_usb_data = {
-	.usb_mode		= T2_USB_MODE_ULPI,
-};
-
 static struct twl4030_platform_data rm680_twl_data = {
-	.irq_base		= TWL4030_IRQ_BASE,
-	.irq_end		= TWL4030_IRQ_END,
 	.gpio			= &rm680_gpio_data,
-	.usb			= &rm680_usb_data,
 	/* add rest of the children here */
 };
 
 static void __init rm680_i2c_init(void)
 {
+	omap3_pmic_get_config(&rm680_twl_data, TWL_COMMON_PDATA_USB, 0);
 	omap_pmic_init(1, 2900, "twl5031", INT_34XX_SYS_NIRQ, &rm680_twl_data);
 	omap_register_i2c_bus(2, 400, NULL, 0);
 	omap_register_i2c_bus(3, 400, NULL, 0);
@@ -163,7 +157,7 @@ MACHINE_START(NOKIA_RM680, "Nokia RM-680 board")
 	.reserve	= omap_reserve,
 	.map_io		= rm680_map_io,
 	.init_early	= rm680_init_early,
-	.init_irq	= omap_init_irq,
+	.init_irq	= omap3_init_irq,
 	.init_machine	= rm680_init,
-	.timer		= &omap_timer,
+	.timer		= &omap3_timer,
 MACHINE_END

arch/arm/mach-omap2/board-rx51-peripherals.c

@@ -288,10 +288,6 @@ static struct twl4030_keypad_data rx51_kp_data = {
 	.rep		= 1,
 };
 
-static struct twl4030_madc_platform_data rx51_madc_data = {
-	.irq_line		= 1,
-};
-
 /* Enable input logic and pull all lines up when eMMC is on. */
 static struct omap_board_mux rx51_mmc2_on_mux[] = {
 	OMAP3_MUX(SDMMC2_CMD, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
@@ -358,14 +354,17 @@ static struct omap2_hsmmc_info mmc[] __initdata = {
 	{}	/* Terminator */
 };
 
-static struct regulator_consumer_supply rx51_vmmc1_supply =
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0");
+static struct regulator_consumer_supply rx51_vmmc1_supply[] = {
+	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
+};
 
-static struct regulator_consumer_supply rx51_vaux3_supply =
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1");
+static struct regulator_consumer_supply rx51_vaux3_supply[] = {
+	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"),
+};
 
-static struct regulator_consumer_supply rx51_vsim_supply =
-	REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.1");
+static struct regulator_consumer_supply rx51_vsim_supply[] = {
+	REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.1"),
+};
 
 static struct regulator_consumer_supply rx51_vmmc2_supplies[] = {
 	/* tlv320aic3x analog supplies */
@@ -395,10 +394,6 @@ static struct regulator_consumer_supply rx51_vaux1_consumers[] = {
 	REGULATOR_SUPPLY("vdd", "2-0063"),
 };
 
-static struct regulator_consumer_supply rx51_vdac_supply[] = {
-	REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"),
-};
-
 static struct regulator_init_data rx51_vaux1 = {
 	.constraints = {
 		.name			= "V28",
@@ -452,8 +447,8 @@ static struct regulator_init_data rx51_vaux3_mmc = {
 					| REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &rx51_vaux3_supply,
+	.num_consumer_supplies	= ARRAY_SIZE(rx51_vaux3_supply),
+	.consumer_supplies	= rx51_vaux3_supply,
 };
 
 static struct regulator_init_data rx51_vaux4 = {
@@ -479,8 +474,8 @@ static struct regulator_init_data rx51_vmmc1 = {
 					| REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &rx51_vmmc1_supply,
+	.num_consumer_supplies	= ARRAY_SIZE(rx51_vmmc1_supply),
+	.consumer_supplies	= rx51_vmmc1_supply,
 };
 
 static struct regulator_init_data rx51_vmmc2 = {
@@ -511,23 +506,8 @@ static struct regulator_init_data rx51_vsim = {
 		.valid_ops_mask		= REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &rx51_vsim_supply,
-};
-
-static struct regulator_init_data rx51_vdac = {
-	.constraints = {
-		.name			= "VDAC",
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= rx51_vdac_supply,
+	.num_consumer_supplies	= ARRAY_SIZE(rx51_vsim_supply),
+	.consumer_supplies	= rx51_vsim_supply,
 };
 
 static struct regulator_init_data rx51_vio = {
@@ -600,10 +580,6 @@ static struct twl4030_gpio_platform_data rx51_gpio_data = {
 	.setup			= rx51_twlgpio_setup,
 };
 
-static struct twl4030_usb_data rx51_usb_data = {
-	.usb_mode		= T2_USB_MODE_ULPI,
-};
-
 static struct twl4030_ins sleep_on_seq[] __initdata = {
 /*
  * Turn off everything
@@ -775,14 +751,9 @@ struct twl4030_codec_data rx51_codec_data __initdata = {
 };
 
 static struct twl4030_platform_data rx51_twldata __initdata = {
-	.irq_base		= TWL4030_IRQ_BASE,
-	.irq_end		= TWL4030_IRQ_END,
-
 	/* platform_data for children goes here */
 	.gpio			= &rx51_gpio_data,
 	.keypad			= &rx51_kp_data,
-	.madc			= &rx51_madc_data,
-	.usb			= &rx51_usb_data,
 	.power			= &rx51_t2scripts_data,
 	.codec			= &rx51_codec_data,
 
@@ -791,7 +762,6 @@ static struct twl4030_platform_data rx51_twldata __initdata = {
 	.vaux4			= &rx51_vaux4,
 	.vmmc1			= &rx51_vmmc1,
 	.vsim			= &rx51_vsim,
-	.vdac			= &rx51_vdac,
 	.vio			= &rx51_vio,
 };
 
@@ -847,6 +817,13 @@ static int __init rx51_i2c_init(void)
 		rx51_twldata.vaux3 = &rx51_vaux3_cam;
 	}
 	rx51_twldata.vmmc2 = &rx51_vmmc2;
+	omap3_pmic_get_config(&rx51_twldata,
+			TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC,
+			TWL_COMMON_REGULATOR_VDAC);
+
+	rx51_twldata.vdac->constraints.apply_uV = true;
+	rx51_twldata.vdac->constraints.name = "VDAC";
+
 	omap_pmic_init(1, 2200, "twl5030", INT_34XX_SYS_NIRQ, &rx51_twldata);
 	omap_register_i2c_bus(2, 100, rx51_peripherals_i2c_board_info_2,
 			      ARRAY_SIZE(rx51_peripherals_i2c_board_info_2));

arch/arm/mach-omap2/board-rx51.c

@@ -160,7 +160,7 @@ MACHINE_START(NOKIA_RX51, "Nokia RX-51 board")
 	.reserve	= rx51_reserve,
 	.map_io		= rx51_map_io,
 	.init_early	= rx51_init_early,
-	.init_irq	= omap_init_irq,
+	.init_irq	= omap3_init_irq,
 	.init_machine	= rx51_init,
-	.timer		= &omap_timer,
+	.timer		= &omap3_timer,
 MACHINE_END

arch/arm/mach-omap2/board-ti8168evm.c

@@ -33,11 +33,6 @@ static void __init ti8168_init_early(void)
 	omap2_init_common_devices(NULL, NULL);
 }
 
-static void __init ti8168_evm_init_irq(void)
-{
-	omap_init_irq();
-}
-
 static void __init ti8168_evm_init(void)
 {
 	omap_serial_init();
@@ -56,7 +51,7 @@ MACHINE_START(TI8168EVM, "ti8168evm")
 	.boot_params	= 0x80000100,
 	.map_io		= ti8168_evm_map_io,
 	.init_early	= ti8168_init_early,
-	.init_irq	= ti8168_evm_init_irq,
-	.timer		= &omap_timer,
+	.init_irq	= ti816x_init_irq,
+	.timer		= &omap3_timer,
 	.init_machine	= ti8168_evm_init,
 MACHINE_END

arch/arm/mach-omap2/board-zoom-peripherals.c

@@ -105,21 +105,20 @@ static struct twl4030_keypad_data zoom_kp_twl4030_data = {
 	.rep		= 1,
 };
 
-static struct regulator_consumer_supply zoom_vmmc1_supply = {
-	.supply		= "vmmc",
+static struct regulator_consumer_supply zoom_vmmc1_supply[] = {
+	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
 };
 
-static struct regulator_consumer_supply zoom_vsim_supply = {
-	.supply		= "vmmc_aux",
+static struct regulator_consumer_supply zoom_vsim_supply[] = {
+	REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"),
 };
 
-static struct regulator_consumer_supply zoom_vmmc2_supply = {
-	.supply		= "vmmc",
+static struct regulator_consumer_supply zoom_vmmc2_supply[] = {
+	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"),
 };
 
-static struct regulator_consumer_supply zoom_vmmc3_supply = {
-	.supply		= "vmmc",
-	.dev_name	= "omap_hsmmc.2",
+static struct regulator_consumer_supply zoom_vmmc3_supply[] = {
+	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.2"),
 };
 
 /* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */
@@ -133,8 +132,8 @@ static struct regulator_init_data zoom_vmmc1 = {
 					| REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies  = 1,
-	.consumer_supplies      = &zoom_vmmc1_supply,
+	.num_consumer_supplies  = ARRAY_SIZE(zoom_vmmc1_supply),
+	.consumer_supplies      = zoom_vmmc1_supply,
 };
 
 /* VMMC2 for MMC2 card */
@@ -148,8 +147,8 @@ static struct regulator_init_data zoom_vmmc2 = {
 		.valid_ops_mask		= REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies  = 1,
-	.consumer_supplies      = &zoom_vmmc2_supply,
+	.num_consumer_supplies  = ARRAY_SIZE(zoom_vmmc2_supply),
+	.consumer_supplies      = zoom_vmmc2_supply,
 };
 
 /* VSIM for OMAP VDD_MMC1A (i/o for DAT4..DAT7) */
@@ -163,16 +162,16 @@ static struct regulator_init_data zoom_vsim = {
 					| REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies  = 1,
-	.consumer_supplies      = &zoom_vsim_supply,
+	.num_consumer_supplies  = ARRAY_SIZE(zoom_vsim_supply),
+	.consumer_supplies      = zoom_vsim_supply,
 };
 
 static struct regulator_init_data zoom_vmmc3 = {
 	.constraints = {
 		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies = &zoom_vmmc3_supply,
+	.num_consumer_supplies	= ARRAY_SIZE(zoom_vmmc3_supply),
+	.consumer_supplies	= zoom_vmmc3_supply,
 };
 
 static struct fixed_voltage_config zoom_vwlan = {
@@ -227,40 +226,6 @@ static struct omap2_hsmmc_info mmc[] = {
 	{}      /* Terminator */
 };
 
-static struct regulator_consumer_supply zoom_vpll2_supplies[] = {
-	REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
-	REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
-};
-
-static struct regulator_consumer_supply zoom_vdda_dac_supply =
-	REGULATOR_SUPPLY("vdda_dac", "omapdss_venc");
-
-static struct regulator_init_data zoom_vpll2 = {
-	.constraints = {
-		.min_uV                 = 1800000,
-		.max_uV                 = 1800000,
-		.valid_modes_mask       = REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask         = REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies		= ARRAY_SIZE(zoom_vpll2_supplies),
-	.consumer_supplies		= zoom_vpll2_supplies,
-};
-
-static struct regulator_init_data zoom_vdac = {
-	.constraints = {
-		.min_uV                 = 1800000,
-		.max_uV                 = 1800000,
-		.valid_modes_mask       = REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask         = REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies		= 1,
-	.consumer_supplies		= &zoom_vdda_dac_supply,
-};
-
 static int zoom_twl_gpio_setup(struct device *dev,
 		unsigned gpio, unsigned ngpio)
 {
@@ -270,13 +235,6 @@ static int zoom_twl_gpio_setup(struct device *dev,
 	mmc[0].gpio_cd = gpio + 0;
 	omap2_hsmmc_init(mmc);
 
-	/* link regulators to MMC adapters ... we "know" the
-	 * regulators will be set up only *after* we return.
-	*/
-	zoom_vmmc1_supply.dev = mmc[0].dev;
-	zoom_vsim_supply.dev = mmc[0].dev;
-	zoom_vmmc2_supply.dev = mmc[1].dev;
-
 	ret = gpio_request_one(LCD_PANEL_ENABLE_GPIO, GPIOF_OUT_INIT_LOW,
 			       "lcd enable");
 	if (ret)
@@ -292,26 +250,6 @@ static void zoom2_set_hs_extmute(int mute)
 	gpio_set_value(ZOOM2_HEADSET_EXTMUTE_GPIO, mute);
 }
 
-static int zoom_batt_table[] = {
-/* 0 C*/
-30800, 29500, 28300, 27100,
-26000, 24900, 23900, 22900, 22000, 21100, 20300, 19400, 18700, 17900,
-17200, 16500, 15900, 15300, 14700, 14100, 13600, 13100, 12600, 12100,
-11600, 11200, 10800, 10400, 10000, 9630,  9280,  8950,  8620,  8310,
-8020,  7730,  7460,  7200,  6950,  6710,  6470,  6250,  6040,  5830,
-5640,  5450,  5260,  5090,  4920,  4760,  4600,  4450,  4310,  4170,
-4040,  3910,  3790,  3670,  3550
-};
-
-static struct twl4030_bci_platform_data zoom_bci_data = {
-	.battery_tmp_tbl	= zoom_batt_table,
-	.tblsize		= ARRAY_SIZE(zoom_batt_table),
-};
-
-static struct twl4030_usb_data zoom_usb_data = {
-	.usb_mode	= T2_USB_MODE_ULPI,
-};
-
 static struct twl4030_gpio_platform_data zoom_gpio_data = {
 	.gpio_base	= OMAP_MAX_GPIO_LINES,
 	.irq_base	= TWL4030_GPIO_IRQ_BASE,
@@ -319,41 +257,29 @@ static struct twl4030_gpio_platform_data zoom_gpio_data = {
 	.setup		= zoom_twl_gpio_setup,
 };
 
-static struct twl4030_madc_platform_data zoom_madc_data = {
-	.irq_line	= 1,
-};
-
-static struct twl4030_codec_audio_data zoom_audio_data;
-
-static struct twl4030_codec_data zoom_codec_data = {
-	.audio_mclk = 26000000,
-	.audio = &zoom_audio_data,
-};
-
 static struct twl4030_platform_data zoom_twldata = {
-	.irq_base	= TWL4030_IRQ_BASE,
-	.irq_end	= TWL4030_IRQ_END,
-
 	/* platform_data for children goes here */
-	.bci		= &zoom_bci_data,
-	.madc		= &zoom_madc_data,
-	.usb		= &zoom_usb_data,
 	.gpio		= &zoom_gpio_data,
 	.keypad		= &zoom_kp_twl4030_data,
-	.codec		= &zoom_codec_data,
 	.vmmc1          = &zoom_vmmc1,
 	.vmmc2          = &zoom_vmmc2,
 	.vsim           = &zoom_vsim,
-	.vpll2		= &zoom_vpll2,
-	.vdac		= &zoom_vdac,
 };
 
 static int __init omap_i2c_init(void)
 {
+	omap3_pmic_get_config(&zoom_twldata,
+			TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_BCI |
+			TWL_COMMON_PDATA_MADC | TWL_COMMON_PDATA_AUDIO,
+			TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
+
 	if (machine_is_omap_zoom2()) {
-		zoom_audio_data.ramp_delay_value = 3;	/* 161 ms */
-		zoom_audio_data.hs_extmute = 1;
-		zoom_audio_data.set_hs_extmute = zoom2_set_hs_extmute;
+		struct twl4030_codec_audio_data *audio_data;
+		audio_data = zoom_twldata.codec->audio;
+
+		audio_data->ramp_delay_value = 3;	/* 161 ms */
+		audio_data->hs_extmute = 1;
+		audio_data->set_hs_extmute = zoom2_set_hs_extmute;
 	}
 	omap_pmic_init(1, 2400, "twl5030", INT_34XX_SYS_NIRQ, &zoom_twldata);
 	omap_register_i2c_bus(2, 400, NULL, 0);

arch/arm/mach-omap2/board-zoom.c

@@ -137,9 +137,9 @@ MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board")
 	.reserve	= omap_reserve,
 	.map_io		= omap3_map_io,
 	.init_early	= omap_zoom_init_early,
-	.init_irq	= omap_init_irq,
+	.init_irq	= omap3_init_irq,
 	.init_machine	= omap_zoom_init,
-	.timer		= &omap_timer,
+	.timer		= &omap3_timer,
 MACHINE_END
 
 MACHINE_START(OMAP_ZOOM3, "OMAP Zoom3 board")
@@ -147,7 +147,7 @@ MACHINE_START(OMAP_ZOOM3, "OMAP Zoom3 board")
 	.reserve	= omap_reserve,
 	.map_io		= omap3_map_io,
 	.init_early	= omap_zoom_init_early,
-	.init_irq	= omap_init_irq,
+	.init_irq	= omap3_init_irq,
 	.init_machine	= omap_zoom_init,
-	.timer		= &omap_timer,
+	.timer		= &omap3_timer,
 MACHINE_END

arch/arm/mach-omap2/clock44xx.h

@@ -8,13 +8,6 @@
 #ifndef __ARCH_ARM_MACH_OMAP2_CLOCK44XX_H
 #define __ARCH_ARM_MACH_OMAP2_CLOCK44XX_H
 
-/*
- * XXX Missing values for the OMAP4 DPLL_USB
- * XXX Missing min_multiplier values for all OMAP4 DPLLs
- */
-#define OMAP4430_MAX_DPLL_MULT	2047
-#define OMAP4430_MAX_DPLL_DIV	128
-
 int omap4xxx_clk_init(void);
 
 #endif

arch/arm/mach-omap2/clock44xx_data.c

@@ -53,9 +53,9 @@ static struct clk extalt_clkin_ck = {
 static struct clk pad_clks_ck = {
 	.name		= "pad_clks_ck",
 	.rate		= 12000000,
-	.ops            = &clkops_omap2_dflt,
-	.enable_reg     = OMAP4430_CM_CLKSEL_ABE,
-	.enable_bit     = OMAP4430_PAD_CLKS_GATE_SHIFT,
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_CLKSEL_ABE,
+	.enable_bit	= OMAP4430_PAD_CLKS_GATE_SHIFT,
 };
 
 static struct clk pad_slimbus_core_clks_ck = {
@@ -73,9 +73,9 @@ static struct clk secure_32k_clk_src_ck = {
 static struct clk slimbus_clk = {
 	.name		= "slimbus_clk",
 	.rate		= 12000000,
-	.ops            = &clkops_omap2_dflt,
-	.enable_reg     = OMAP4430_CM_CLKSEL_ABE,
-	.enable_bit     = OMAP4430_SLIMBUS_CLK_GATE_SHIFT,
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_CLKSEL_ABE,
+	.enable_bit	= OMAP4430_SLIMBUS_CLK_GATE_SHIFT,
 };
 
 static struct clk sys_32k_ck = {
@@ -258,8 +258,8 @@ static struct dpll_data dpll_abe_dd = {
 	.enable_mask	= OMAP4430_DPLL_EN_MASK,
 	.autoidle_mask	= OMAP4430_AUTO_DPLL_MODE_MASK,
 	.idlest_mask	= OMAP4430_ST_DPLL_CLK_MASK,
-	.max_multiplier	= OMAP4430_MAX_DPLL_MULT,
-	.max_divider	= OMAP4430_MAX_DPLL_DIV,
+	.max_multiplier	= 2047,
+	.max_divider	= 128,
 	.min_divider	= 1,
 };
 
@@ -278,10 +278,10 @@ static struct clk dpll_abe_ck = {
 static struct clk dpll_abe_x2_ck = {
 	.name		= "dpll_abe_x2_ck",
 	.parent		= &dpll_abe_ck,
+	.clksel_reg	= OMAP4430_CM_DIV_M2_DPLL_ABE,
 	.flags		= CLOCK_CLKOUTX2,
 	.ops		= &clkops_omap4_dpllmx_ops,
 	.recalc		= &omap3_clkoutx2_recalc,
-	.clksel_reg	= OMAP4430_CM_DIV_M2_DPLL_ABE,
 };
 
 static const struct clksel_rate div31_1to31_rates[] = {
@@ -434,8 +434,8 @@ static struct dpll_data dpll_core_dd = {
 	.enable_mask	= OMAP4430_DPLL_EN_MASK,
 	.autoidle_mask	= OMAP4430_AUTO_DPLL_MODE_MASK,
 	.idlest_mask	= OMAP4430_ST_DPLL_CLK_MASK,
-	.max_multiplier	= OMAP4430_MAX_DPLL_MULT,
-	.max_divider	= OMAP4430_MAX_DPLL_DIV,
+	.max_multiplier	= 2047,
+	.max_divider	= 128,
 	.min_divider	= 1,
 };
 
@@ -622,11 +622,11 @@ static struct clk dpll_core_m3x2_ck = {
 	.clksel_reg	= OMAP4430_CM_DIV_M3_DPLL_CORE,
 	.clksel_mask	= OMAP4430_DPLL_CLKOUTHIF_DIV_MASK,
 	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM_DIV_M3_DPLL_CORE,
-	.enable_bit	= OMAP4430_DPLL_CLKOUTHIF_GATE_CTRL_SHIFT,
 	.recalc		= &omap2_clksel_recalc,
 	.round_rate	= &omap2_clksel_round_rate,
 	.set_rate	= &omap2_clksel_set_rate,
+	.enable_reg	= OMAP4430_CM_DIV_M3_DPLL_CORE,
+	.enable_bit	= OMAP4430_DPLL_CLKOUTHIF_GATE_CTRL_SHIFT,
 };
 
 static struct clk dpll_core_m7x2_ck = {
@@ -672,8 +672,8 @@ static struct dpll_data dpll_iva_dd = {
 	.enable_mask	= OMAP4430_DPLL_EN_MASK,
 	.autoidle_mask	= OMAP4430_AUTO_DPLL_MODE_MASK,
 	.idlest_mask	= OMAP4430_ST_DPLL_CLK_MASK,
-	.max_multiplier	= OMAP4430_MAX_DPLL_MULT,
-	.max_divider	= OMAP4430_MAX_DPLL_DIV,
+	.max_multiplier	= 2047,
+	.max_divider	= 128,
 	.min_divider	= 1,
 };
 
@@ -740,8 +740,8 @@ static struct dpll_data dpll_mpu_dd = {
 	.enable_mask	= OMAP4430_DPLL_EN_MASK,
 	.autoidle_mask	= OMAP4430_AUTO_DPLL_MODE_MASK,
 	.idlest_mask	= OMAP4430_ST_DPLL_CLK_MASK,
-	.max_multiplier	= OMAP4430_MAX_DPLL_MULT,
-	.max_divider	= OMAP4430_MAX_DPLL_DIV,
+	.max_multiplier	= 2047,
+	.max_divider	= 128,
 	.min_divider	= 1,
 };
 
@@ -813,8 +813,8 @@ static struct dpll_data dpll_per_dd = {
 	.enable_mask	= OMAP4430_DPLL_EN_MASK,
 	.autoidle_mask	= OMAP4430_AUTO_DPLL_MODE_MASK,
 	.idlest_mask	= OMAP4430_ST_DPLL_CLK_MASK,
-	.max_multiplier	= OMAP4430_MAX_DPLL_MULT,
-	.max_divider	= OMAP4430_MAX_DPLL_DIV,
+	.max_multiplier	= 2047,
+	.max_divider	= 128,
 	.min_divider	= 1,
 };
 
@@ -850,10 +850,10 @@ static struct clk dpll_per_m2_ck = {
 static struct clk dpll_per_x2_ck = {
 	.name		= "dpll_per_x2_ck",
 	.parent		= &dpll_per_ck,
+	.clksel_reg	= OMAP4430_CM_DIV_M2_DPLL_PER,
 	.flags		= CLOCK_CLKOUTX2,
 	.ops		= &clkops_omap4_dpllmx_ops,
 	.recalc		= &omap3_clkoutx2_recalc,
-	.clksel_reg	= OMAP4430_CM_DIV_M2_DPLL_PER,
 };
 
 static const struct clksel dpll_per_m2x2_div[] = {
@@ -880,11 +880,11 @@ static struct clk dpll_per_m3x2_ck = {
 	.clksel_reg	= OMAP4430_CM_DIV_M3_DPLL_PER,
 	.clksel_mask	= OMAP4430_DPLL_CLKOUTHIF_DIV_MASK,
 	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM_DIV_M3_DPLL_PER,
-	.enable_bit	= OMAP4430_DPLL_CLKOUTHIF_GATE_CTRL_SHIFT,
 	.recalc		= &omap2_clksel_recalc,
 	.round_rate	= &omap2_clksel_round_rate,
 	.set_rate	= &omap2_clksel_set_rate,
+	.enable_reg	= OMAP4430_CM_DIV_M3_DPLL_PER,
+	.enable_bit	= OMAP4430_DPLL_CLKOUTHIF_GATE_CTRL_SHIFT,
 };
 
 static struct clk dpll_per_m4x2_ck = {
@@ -935,63 +935,6 @@ static struct clk dpll_per_m7x2_ck = {
 	.set_rate	= &omap2_clksel_set_rate,
 };
 
-/* DPLL_UNIPRO */
-static struct dpll_data dpll_unipro_dd = {
-	.mult_div1_reg	= OMAP4430_CM_CLKSEL_DPLL_UNIPRO,
-	.clk_bypass	= &sys_clkin_ck,
-	.clk_ref	= &sys_clkin_ck,
-	.control_reg	= OMAP4430_CM_CLKMODE_DPLL_UNIPRO,
-	.modes		= (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
-	.autoidle_reg	= OMAP4430_CM_AUTOIDLE_DPLL_UNIPRO,
-	.idlest_reg	= OMAP4430_CM_IDLEST_DPLL_UNIPRO,
-	.mult_mask	= OMAP4430_DPLL_MULT_MASK,
-	.div1_mask	= OMAP4430_DPLL_DIV_MASK,
-	.enable_mask	= OMAP4430_DPLL_EN_MASK,
-	.autoidle_mask	= OMAP4430_AUTO_DPLL_MODE_MASK,
-	.idlest_mask	= OMAP4430_ST_DPLL_CLK_MASK,
-	.sddiv_mask	= OMAP4430_DPLL_SD_DIV_MASK,
-	.max_multiplier	= OMAP4430_MAX_DPLL_MULT,
-	.max_divider	= OMAP4430_MAX_DPLL_DIV,
-	.min_divider	= 1,
-};
-
-
-static struct clk dpll_unipro_ck = {
-	.name		= "dpll_unipro_ck",
-	.parent		= &sys_clkin_ck,
-	.dpll_data	= &dpll_unipro_dd,
-	.init		= &omap2_init_dpll_parent,
-	.ops		= &clkops_omap3_noncore_dpll_ops,
-	.recalc		= &omap3_dpll_recalc,
-	.round_rate	= &omap2_dpll_round_rate,
-	.set_rate	= &omap3_noncore_dpll_set_rate,
-};
-
-static struct clk dpll_unipro_x2_ck = {
-	.name		= "dpll_unipro_x2_ck",
-	.parent		= &dpll_unipro_ck,
-	.flags		= CLOCK_CLKOUTX2,
-	.ops		= &clkops_null,
-	.recalc		= &omap3_clkoutx2_recalc,
-};
-
-static const struct clksel dpll_unipro_m2x2_div[] = {
-	{ .parent = &dpll_unipro_x2_ck, .rates = div31_1to31_rates },
-	{ .parent = NULL },
-};
-
-static struct clk dpll_unipro_m2x2_ck = {
-	.name		= "dpll_unipro_m2x2_ck",
-	.parent		= &dpll_unipro_x2_ck,
-	.clksel		= dpll_unipro_m2x2_div,
-	.clksel_reg	= OMAP4430_CM_DIV_M2_DPLL_UNIPRO,
-	.clksel_mask	= OMAP4430_DPLL_CLKOUT_DIV_MASK,
-	.ops		= &clkops_omap4_dpllmx_ops,
-	.recalc		= &omap2_clksel_recalc,
-	.round_rate	= &omap2_clksel_round_rate,
-	.set_rate	= &omap2_clksel_set_rate,
-};
-
 static struct clk usb_hs_clk_div_ck = {
 	.name		= "usb_hs_clk_div_ck",
 	.parent		= &dpll_abe_m3x2_ck,
@@ -1015,8 +958,9 @@ static struct dpll_data dpll_usb_dd = {
 	.enable_mask	= OMAP4430_DPLL_EN_MASK,
 	.autoidle_mask	= OMAP4430_AUTO_DPLL_MODE_MASK,
 	.idlest_mask	= OMAP4430_ST_DPLL_CLK_MASK,
-	.max_multiplier	= OMAP4430_MAX_DPLL_MULT,
-	.max_divider	= OMAP4430_MAX_DPLL_DIV,
+	.sddiv_mask	= OMAP4430_DPLL_SD_DIV_MASK,
+	.max_multiplier	= 4095,
+	.max_divider	= 256,
 	.min_divider	= 1,
 };
 
@@ -1035,8 +979,8 @@ static struct clk dpll_usb_ck = {
 static struct clk dpll_usb_clkdcoldo_ck = {
 	.name		= "dpll_usb_clkdcoldo_ck",
 	.parent		= &dpll_usb_ck,
-	.ops		= &clkops_omap4_dpllmx_ops,
 	.clksel_reg	= OMAP4430_CM_CLKDCOLDO_DPLL_USB,
+	.ops		= &clkops_omap4_dpllmx_ops,
 	.recalc		= &followparent_recalc,
 };
 
@@ -1169,19 +1113,6 @@ static struct clk func_96m_fclk = {
 	.set_rate	= &omap2_clksel_set_rate,
 };
 
-static const struct clksel hsmmc6_fclk_sel[] = {
-	{ .parent = &func_64m_fclk, .rates = div_1_0_rates },
-	{ .parent = &func_96m_fclk, .rates = div_1_1_rates },
-	{ .parent = NULL },
-};
-
-static struct clk hsmmc6_fclk = {
-	.name		= "hsmmc6_fclk",
-	.parent		= &func_64m_fclk,
-	.ops		= &clkops_null,
-	.recalc		= &followparent_recalc,
-};
-
 static const struct clksel_rate div2_1to8_rates[] = {
 	{ .div = 1, .val = 0, .flags = RATE_IN_4430 },
 	{ .div = 8, .val = 1, .flags = RATE_IN_4430 },
@@ -1264,6 +1195,21 @@ static struct clk l4_wkup_clk_mux_ck = {
 	.recalc		= &omap2_clksel_recalc,
 };
 
+static struct clk ocp_abe_iclk = {
+	.name		= "ocp_abe_iclk",
+	.parent		= &aess_fclk,
+	.ops		= &clkops_null,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk per_abe_24m_fclk = {
+	.name		= "per_abe_24m_fclk",
+	.parent		= &dpll_abe_m2_ck,
+	.ops		= &clkops_null,
+	.fixed_div	= 4,
+	.recalc		= &omap_fixed_divisor_recalc,
+};
+
 static const struct clksel per_abe_nc_fclk_div[] = {
 	{ .parent = &dpll_abe_m2_ck, .rates = div2_1to2_rates },
 	{ .parent = NULL },
@@ -1281,41 +1227,6 @@ static struct clk per_abe_nc_fclk = {
 	.set_rate	= &omap2_clksel_set_rate,
 };
 
-static const struct clksel mcasp2_fclk_sel[] = {
-	{ .parent = &func_96m_fclk, .rates = div_1_0_rates },
-	{ .parent = &per_abe_nc_fclk, .rates = div_1_1_rates },
-	{ .parent = NULL },
-};
-
-static struct clk mcasp2_fclk = {
-	.name		= "mcasp2_fclk",
-	.parent		= &func_96m_fclk,
-	.ops		= &clkops_null,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mcasp3_fclk = {
-	.name		= "mcasp3_fclk",
-	.parent		= &func_96m_fclk,
-	.ops		= &clkops_null,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk ocp_abe_iclk = {
-	.name		= "ocp_abe_iclk",
-	.parent		= &aess_fclk,
-	.ops		= &clkops_null,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk per_abe_24m_fclk = {
-	.name		= "per_abe_24m_fclk",
-	.parent		= &dpll_abe_m2_ck,
-	.ops		= &clkops_null,
-	.fixed_div	= 4,
-	.recalc		= &omap_fixed_divisor_recalc,
-};
-
 static const struct clksel pmd_stm_clock_mux_sel[] = {
 	{ .parent = &sys_clkin_ck, .rates = div_1_0_rates },
 	{ .parent = &dpll_core_m6x2_ck, .rates = div_1_1_rates },
@@ -1846,8 +1757,8 @@ static struct clk l3_instr_ick = {
 	.ops		= &clkops_omap2_dflt,
 	.enable_reg	= OMAP4430_CM_L3INSTR_L3_INSTR_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
-	.clkdm_name	= "l3_instr_clkdm",
 	.flags		= ENABLE_ON_INIT,
+	.clkdm_name	= "l3_instr_clkdm",
 	.parent		= &l3_div_ck,
 	.recalc		= &followparent_recalc,
 };
@@ -1857,8 +1768,8 @@ static struct clk l3_main_3_ick = {
 	.ops		= &clkops_omap2_dflt,
 	.enable_reg	= OMAP4430_CM_L3INSTR_L3_3_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
-	.clkdm_name	= "l3_instr_clkdm",
 	.flags		= ENABLE_ON_INIT,
+	.clkdm_name	= "l3_instr_clkdm",
 	.parent		= &l3_div_ck,
 	.recalc		= &followparent_recalc,
 };
@@ -1995,10 +1906,16 @@ static struct clk mcbsp3_fck = {
 	.clkdm_name	= "abe_clkdm",
 };
 
+static const struct clksel mcbsp4_sync_mux_sel[] = {
+	{ .parent = &func_96m_fclk, .rates = div_1_0_rates },
+	{ .parent = &per_abe_nc_fclk, .rates = div_1_1_rates },
+	{ .parent = NULL },
+};
+
 static struct clk mcbsp4_sync_mux_ck = {
 	.name		= "mcbsp4_sync_mux_ck",
 	.parent		= &func_96m_fclk,
-	.clksel		= mcasp2_fclk_sel,
+	.clksel		= mcbsp4_sync_mux_sel,
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP4430_CM_L4PER_MCBSP4_CLKCTRL,
 	.clksel_mask	= OMAP4430_CLKSEL_INTERNAL_SOURCE_MASK,
@@ -2077,11 +1994,17 @@ static struct clk mcspi4_fck = {
 	.recalc		= &followparent_recalc,
 };
 
+static const struct clksel hsmmc1_fclk_sel[] = {
+	{ .parent = &func_64m_fclk, .rates = div_1_0_rates },
+	{ .parent = &func_96m_fclk, .rates = div_1_1_rates },
+	{ .parent = NULL },
+};
+
 /* Merged hsmmc1_fclk into mmc1 */
 static struct clk mmc1_fck = {
 	.name		= "mmc1_fck",
 	.parent		= &func_64m_fclk,
-	.clksel		= hsmmc6_fclk_sel,
+	.clksel		= hsmmc1_fclk_sel,
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP4430_CM_L3INIT_MMC1_CLKCTRL,
 	.clksel_mask	= OMAP4430_CLKSEL_MASK,
@@ -2096,7 +2019,7 @@ static struct clk mmc1_fck = {
 static struct clk mmc2_fck = {
 	.name		= "mmc2_fck",
 	.parent		= &func_64m_fclk,
-	.clksel		= hsmmc6_fclk_sel,
+	.clksel		= hsmmc1_fclk_sel,
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP4430_CM_L3INIT_MMC2_CLKCTRL,
 	.clksel_mask	= OMAP4430_CLKSEL_MASK,
@@ -2162,8 +2085,8 @@ static struct clk ocp_wp_noc_ick = {
 	.ops		= &clkops_omap2_dflt,
 	.enable_reg	= OMAP4430_CM_L3INSTR_OCP_WP1_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
-	.clkdm_name	= "l3_instr_clkdm",
 	.flags		= ENABLE_ON_INIT,
+	.clkdm_name	= "l3_instr_clkdm",
 	.parent		= &l3_div_ck,
 	.recalc		= &followparent_recalc,
 };
@@ -2895,6 +2818,7 @@ static struct clk auxclk2_ck = {
 	.enable_reg	= OMAP4_SCRM_AUXCLK2,
 	.enable_bit	= OMAP4_ENABLE_SHIFT,
 };
+
 static struct clk auxclk3_ck = {
 	.name		= "auxclk3_ck",
 	.parent		= &sys_clkin_ck,
@@ -3077,9 +3001,6 @@ static struct omap_clk omap44xx_clks[] = {
 	CLK(NULL,	"dpll_per_m5x2_ck",		&dpll_per_m5x2_ck,	CK_443X),
 	CLK(NULL,	"dpll_per_m6x2_ck",		&dpll_per_m6x2_ck,	CK_443X),
 	CLK(NULL,	"dpll_per_m7x2_ck",		&dpll_per_m7x2_ck,	CK_443X),
-	CLK(NULL,	"dpll_unipro_ck",		&dpll_unipro_ck,	CK_443X),
-	CLK(NULL,	"dpll_unipro_x2_ck",		&dpll_unipro_x2_ck,	CK_443X),
-	CLK(NULL,	"dpll_unipro_m2x2_ck",		&dpll_unipro_m2x2_ck,	CK_443X),
 	CLK(NULL,	"usb_hs_clk_div_ck",		&usb_hs_clk_div_ck,	CK_443X),
 	CLK(NULL,	"dpll_usb_ck",			&dpll_usb_ck,	CK_443X),
 	CLK(NULL,	"dpll_usb_clkdcoldo_ck",	&dpll_usb_clkdcoldo_ck,	CK_443X),
@@ -3092,17 +3013,14 @@ static struct omap_clk omap44xx_clks[] = {
 	CLK(NULL,	"func_48mc_fclk",		&func_48mc_fclk,	CK_443X),
 	CLK(NULL,	"func_64m_fclk",		&func_64m_fclk,	CK_443X),
 	CLK(NULL,	"func_96m_fclk",		&func_96m_fclk,	CK_443X),
-	CLK(NULL,	"hsmmc6_fclk",			&hsmmc6_fclk,	CK_443X),
 	CLK(NULL,	"init_60m_fclk",		&init_60m_fclk,	CK_443X),
 	CLK(NULL,	"l3_div_ck",			&l3_div_ck,	CK_443X),
 	CLK(NULL,	"l4_div_ck",			&l4_div_ck,	CK_443X),
 	CLK(NULL,	"lp_clk_div_ck",		&lp_clk_div_ck,	CK_443X),
 	CLK(NULL,	"l4_wkup_clk_mux_ck",		&l4_wkup_clk_mux_ck,	CK_443X),
-	CLK(NULL,	"per_abe_nc_fclk",		&per_abe_nc_fclk,	CK_443X),
-	CLK(NULL,	"mcasp2_fclk",			&mcasp2_fclk,	CK_443X),
-	CLK(NULL,	"mcasp3_fclk",			&mcasp3_fclk,	CK_443X),
 	CLK(NULL,	"ocp_abe_iclk",			&ocp_abe_iclk,	CK_443X),
 	CLK(NULL,	"per_abe_24m_fclk",		&per_abe_24m_fclk,	CK_443X),
+	CLK(NULL,	"per_abe_nc_fclk",		&per_abe_nc_fclk,	CK_443X),
 	CLK(NULL,	"pmd_stm_clock_mux_ck",		&pmd_stm_clock_mux_ck,	CK_443X),
 	CLK(NULL,	"pmd_trace_clk_mux_ck",		&pmd_trace_clk_mux_ck,	CK_443X),
 	CLK(NULL,	"syc_clk_div_ck",		&syc_clk_div_ck,	CK_443X),
@@ -3204,7 +3122,6 @@ static struct omap_clk omap44xx_clks[] = {
 	CLK(NULL,	"uart2_fck",			&uart2_fck,	CK_443X),
 	CLK(NULL,	"uart3_fck",			&uart3_fck,	CK_443X),
 	CLK(NULL,	"uart4_fck",			&uart4_fck,	CK_443X),
-	CLK(NULL,	"usb_host_fs_fck",		&usb_host_fs_fck,	CK_443X),
 	CLK("usbhs-omap.0",	"fs_fck",		&usb_host_fs_fck,	CK_443X),
 	CLK(NULL,	"utmi_p1_gfclk",		&utmi_p1_gfclk,	CK_443X),
 	CLK(NULL,	"usb_host_hs_utmi_p1_clk",	&usb_host_hs_utmi_p1_clk,	CK_443X),
@@ -3216,9 +3133,7 @@ static struct omap_clk omap44xx_clks[] = {
 	CLK(NULL,	"usb_host_hs_hsic60m_p2_clk",	&usb_host_hs_hsic60m_p2_clk,	CK_443X),
 	CLK(NULL,	"usb_host_hs_hsic480m_p2_clk",	&usb_host_hs_hsic480m_p2_clk,	CK_443X),
 	CLK(NULL,	"usb_host_hs_func48mclk",	&usb_host_hs_func48mclk,	CK_443X),
-	CLK(NULL,	"usb_host_hs_fck",		&usb_host_hs_fck,	CK_443X),
 	CLK("usbhs-omap.0",	"hs_fck",		&usb_host_hs_fck,	CK_443X),
-	CLK("usbhs-omap.0",	"usbhost_ick",		&dummy_ck,		CK_443X),
 	CLK(NULL,	"otg_60m_gfclk",		&otg_60m_gfclk,	CK_443X),
 	CLK(NULL,	"usb_otg_hs_xclk",		&usb_otg_hs_xclk,	CK_443X),
 	CLK("musb-omap2430",	"ick",				&usb_otg_hs_ick,	CK_443X),
@@ -3226,17 +3141,26 @@ static struct omap_clk omap44xx_clks[] = {
 	CLK(NULL,	"usb_tll_hs_usb_ch2_clk",	&usb_tll_hs_usb_ch2_clk,	CK_443X),
 	CLK(NULL,	"usb_tll_hs_usb_ch0_clk",	&usb_tll_hs_usb_ch0_clk,	CK_443X),
 	CLK(NULL,	"usb_tll_hs_usb_ch1_clk",	&usb_tll_hs_usb_ch1_clk,	CK_443X),
-	CLK(NULL,	"usb_tll_hs_ick",		&usb_tll_hs_ick,	CK_443X),
 	CLK("usbhs-omap.0",	"usbtll_ick",		&usb_tll_hs_ick,	CK_443X),
-	CLK("usbhs-omap.0",	"usbtll_fck",		&dummy_ck,	CK_443X),
 	CLK(NULL,	"usim_ck",			&usim_ck,	CK_443X),
 	CLK(NULL,	"usim_fclk",			&usim_fclk,	CK_443X),
 	CLK(NULL,	"usim_fck",			&usim_fck,	CK_443X),
 	CLK("omap_wdt",	"fck",				&wd_timer2_fck,	CK_443X),
-	CLK(NULL,	"mailboxes_ick",		&dummy_ck,	CK_443X),
 	CLK(NULL,	"wd_timer3_fck",		&wd_timer3_fck,	CK_443X),
 	CLK(NULL,	"stm_clk_div_ck",		&stm_clk_div_ck,	CK_443X),
 	CLK(NULL,	"trace_clk_div_ck",		&trace_clk_div_ck,	CK_443X),
+	CLK(NULL,	"auxclk0_ck",			&auxclk0_ck,	CK_443X),
+	CLK(NULL,	"auxclk1_ck",			&auxclk1_ck,	CK_443X),
+	CLK(NULL,	"auxclk2_ck",			&auxclk2_ck,	CK_443X),
+	CLK(NULL,	"auxclk3_ck",			&auxclk3_ck,	CK_443X),
+	CLK(NULL,	"auxclk4_ck",			&auxclk4_ck,	CK_443X),
+	CLK(NULL,	"auxclk5_ck",			&auxclk5_ck,	CK_443X),
+	CLK(NULL,	"auxclkreq0_ck",		&auxclkreq0_ck,	CK_443X),
+	CLK(NULL,	"auxclkreq1_ck",		&auxclkreq1_ck,	CK_443X),
+	CLK(NULL,	"auxclkreq2_ck",		&auxclkreq2_ck,	CK_443X),
+	CLK(NULL,	"auxclkreq3_ck",		&auxclkreq3_ck,	CK_443X),
+	CLK(NULL,	"auxclkreq4_ck",		&auxclkreq4_ck,	CK_443X),
+	CLK(NULL,	"auxclkreq5_ck",		&auxclkreq5_ck,	CK_443X),
 	CLK(NULL,	"gpmc_ck",			&dummy_ck,	CK_443X),
 	CLK(NULL,	"gpt1_ick",			&dummy_ck,	CK_443X),
 	CLK(NULL,	"gpt2_ick",			&dummy_ck,	CK_443X),
@@ -3253,6 +3177,7 @@ static struct omap_clk omap44xx_clks[] = {
 	CLK("omap_i2c.2",	"ick",				&dummy_ck,	CK_443X),
 	CLK("omap_i2c.3",	"ick",				&dummy_ck,	CK_443X),
 	CLK("omap_i2c.4",	"ick",				&dummy_ck,	CK_443X),
+	CLK(NULL,	"mailboxes_ick",		&dummy_ck,	CK_443X),
 	CLK("omap_hsmmc.0",	"ick",				&dummy_ck,	CK_443X),
 	CLK("omap_hsmmc.1",	"ick",				&dummy_ck,	CK_443X),
 	CLK("omap_hsmmc.2",	"ick",				&dummy_ck,	CK_443X),
@@ -3270,19 +3195,9 @@ static struct omap_clk omap44xx_clks[] = {
 	CLK(NULL,	"uart2_ick",			&dummy_ck,	CK_443X),
 	CLK(NULL,	"uart3_ick",			&dummy_ck,	CK_443X),
 	CLK(NULL,	"uart4_ick",			&dummy_ck,	CK_443X),
+	CLK("usbhs-omap.0",	"usbhost_ick",		&dummy_ck,		CK_443X),
+	CLK("usbhs-omap.0",	"usbtll_fck",		&dummy_ck,	CK_443X),
 	CLK("omap_wdt",	"ick",				&dummy_ck,	CK_443X),
-	CLK(NULL,	"auxclk0_ck",			&auxclk0_ck,	CK_443X),
-	CLK(NULL,	"auxclk1_ck",			&auxclk1_ck,	CK_443X),
-	CLK(NULL,	"auxclk2_ck",			&auxclk2_ck,	CK_443X),
-	CLK(NULL,	"auxclk3_ck",			&auxclk3_ck,	CK_443X),
-	CLK(NULL,	"auxclk4_ck",			&auxclk4_ck,	CK_443X),
-	CLK(NULL,	"auxclk5_ck",			&auxclk5_ck,	CK_443X),
-	CLK(NULL,	"auxclkreq0_ck",		&auxclkreq0_ck,	CK_443X),
-	CLK(NULL,	"auxclkreq1_ck",		&auxclkreq1_ck,	CK_443X),
-	CLK(NULL,	"auxclkreq2_ck",		&auxclkreq2_ck,	CK_443X),
-	CLK(NULL,	"auxclkreq3_ck",		&auxclkreq3_ck,	CK_443X),
-	CLK(NULL,	"auxclkreq4_ck",		&auxclkreq4_ck,	CK_443X),
-	CLK(NULL,	"auxclkreq5_ck",		&auxclkreq5_ck,	CK_443X),
 };
 
 int __init omap4xxx_clk_init(void)

arch/arm/mach-omap2/clockdomains44xx_data.c

@@ -1,11 +1,12 @@
 /*
  * OMAP4 Clock domains framework
  *
- * Copyright (C) 2009 Texas Instruments, Inc.
- * Copyright (C) 2009 Nokia Corporation
+ * Copyright (C) 2009-2011 Texas Instruments, Inc.
+ * Copyright (C) 2009-2011 Nokia Corporation
  *
  * Abhijit Pagare (abhijitpagare@ti.com)
  * Benoit Cousson (b-cousson@ti.com)
+ * Paul Walmsley (paul@pwsan.com)
  *
  * This file is automatically generated from the OMAP hardware databases.
  * We respectfully ask that any modifications to this file be coordinated
@@ -32,7 +33,7 @@
 
 /* Static Dependencies for OMAP4 Clock Domains */
 
-static struct clkdm_dep ducati_wkup_sleep_deps[] = {
+static struct clkdm_dep d2d_wkup_sleep_deps[] = {
 	{
 		.clkdm_name	 = "abe_clkdm",
 		.omap_chip	 = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
@@ -50,103 +51,103 @@ static struct clkdm_dep ducati_wkup_sleep_deps[] = {
 		.omap_chip	 = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
 	},
 	{
-		.clkdm_name	 = "l3_dss_clkdm",
+		.clkdm_name	 = "l3_emif_clkdm",
 		.omap_chip	 = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
 	},
 	{
-		.clkdm_name	 = "l3_emif_clkdm",
+		.clkdm_name	 = "l3_init_clkdm",
 		.omap_chip	 = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
 	},
 	{
-		.clkdm_name	 = "l3_gfx_clkdm",
+		.clkdm_name	 = "l4_cfg_clkdm",
 		.omap_chip	 = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
 	},
 	{
-		.clkdm_name	 = "l3_init_clkdm",
+		.clkdm_name	 = "l4_per_clkdm",
 		.omap_chip	 = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
 	},
+	{ NULL },
+};
+
+static struct clkdm_dep ducati_wkup_sleep_deps[] = {
 	{
-		.clkdm_name	 = "l4_cfg_clkdm",
+		.clkdm_name	 = "abe_clkdm",
 		.omap_chip	 = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
 	},
 	{
-		.clkdm_name	 = "l4_per_clkdm",
+		.clkdm_name	 = "ivahd_clkdm",
 		.omap_chip	 = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
 	},
 	{
-		.clkdm_name	 = "l4_secure_clkdm",
+		.clkdm_name	 = "l3_1_clkdm",
 		.omap_chip	 = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
 	},
 	{
-		.clkdm_name	 = "l4_wkup_clkdm",
+		.clkdm_name	 = "l3_2_clkdm",
 		.omap_chip	 = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
 	},
 	{
-		.clkdm_name	 = "tesla_clkdm",
+		.clkdm_name	 = "l3_dss_clkdm",
 		.omap_chip	 = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
 	},
-	{ NULL },
-};
-
-static struct clkdm_dep iss_wkup_sleep_deps[] = {
 	{
-		.clkdm_name	 = "ivahd_clkdm",
+		.clkdm_name	 = "l3_emif_clkdm",
 		.omap_chip	 = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
 	},
 	{
-		.clkdm_name	 = "l3_1_clkdm",
+		.clkdm_name	 = "l3_gfx_clkdm",
 		.omap_chip	 = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
 	},
 	{
-		.clkdm_name	 = "l3_emif_clkdm",
+		.clkdm_name	 = "l3_init_clkdm",
 		.omap_chip	 = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
 	},
-	{ NULL },
-};
-
-static struct clkdm_dep ivahd_wkup_sleep_deps[] = {
 	{
-		.clkdm_name	 = "l3_1_clkdm",
+		.clkdm_name	 = "l4_cfg_clkdm",
 		.omap_chip	 = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
 	},
 	{
-		.clkdm_name	 = "l3_emif_clkdm",
+		.clkdm_name	 = "l4_per_clkdm",
 		.omap_chip	 = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
 	},
-	{ NULL },
-};
-
-static struct clkdm_dep l3_d2d_wkup_sleep_deps[] = {
 	{
-		.clkdm_name	 = "abe_clkdm",
+		.clkdm_name	 = "l4_secure_clkdm",
 		.omap_chip	 = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
 	},
 	{
-		.clkdm_name	 = "ivahd_clkdm",
+		.clkdm_name	 = "l4_wkup_clkdm",
 		.omap_chip	 = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
 	},
 	{
-		.clkdm_name	 = "l3_1_clkdm",
+		.clkdm_name	 = "tesla_clkdm",
 		.omap_chip	 = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
 	},
+	{ NULL },
+};
+
+static struct clkdm_dep iss_wkup_sleep_deps[] = {
 	{
-		.clkdm_name	 = "l3_2_clkdm",
+		.clkdm_name	 = "ivahd_clkdm",
 		.omap_chip	 = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
 	},
 	{
-		.clkdm_name	 = "l3_emif_clkdm",
+		.clkdm_name	 = "l3_1_clkdm",
 		.omap_chip	 = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
 	},
 	{
-		.clkdm_name	 = "l3_init_clkdm",
+		.clkdm_name	 = "l3_emif_clkdm",
 		.omap_chip	 = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
 	},
+	{ NULL },
+};
+
+static struct clkdm_dep ivahd_wkup_sleep_deps[] = {
 	{
-		.clkdm_name	 = "l4_cfg_clkdm",
+		.clkdm_name	 = "l3_1_clkdm",
 		.omap_chip	 = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
 	},
 	{
-		.clkdm_name	 = "l4_per_clkdm",
+		.clkdm_name	 = "l3_emif_clkdm",
 		.omap_chip	 = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
 	},
 	{ NULL },
@@ -280,7 +281,7 @@ static struct clkdm_dep l4_secure_wkup_sleep_deps[] = {
 	{ NULL },
 };
 
-static struct clkdm_dep mpuss_wkup_sleep_deps[] = {
+static struct clkdm_dep mpu_wkup_sleep_deps[] = {
 	{
 		.clkdm_name	 = "abe_clkdm",
 		.omap_chip	 = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
@@ -497,14 +498,14 @@ static struct clockdomain l3_init_44xx_clkdm = {
 	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
 };
 
-static struct clockdomain mpuss_44xx_clkdm = {
-	.name		  = "mpuss_clkdm",
-	.pwrdm		  = { .name = "mpu_pwrdm" },
-	.prcm_partition	  = OMAP4430_CM1_PARTITION,
-	.cm_inst	  = OMAP4430_CM1_MPU_INST,
-	.clkdm_offs	  = OMAP4430_CM1_MPU_MPU_CDOFFS,
-	.wkdep_srcs	  = mpuss_wkup_sleep_deps,
-	.sleepdep_srcs	  = mpuss_wkup_sleep_deps,
+static struct clockdomain d2d_44xx_clkdm = {
+	.name		  = "d2d_clkdm",
+	.pwrdm		  = { .name = "core_pwrdm" },
+	.prcm_partition	  = OMAP4430_CM2_PARTITION,
+	.cm_inst	  = OMAP4430_CM2_CORE_INST,
+	.clkdm_offs	  = OMAP4430_CM2_CORE_D2D_CDOFFS,
+	.wkdep_srcs	  = d2d_wkup_sleep_deps,
+	.sleepdep_srcs	  = d2d_wkup_sleep_deps,
 	.flags		  = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
 	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
 };
@@ -563,6 +564,18 @@ static struct clockdomain ducati_44xx_clkdm = {
 	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
 };
 
+static struct clockdomain mpu_44xx_clkdm = {
+	.name		  = "mpu_clkdm",
+	.pwrdm		  = { .name = "mpu_pwrdm" },
+	.prcm_partition	  = OMAP4430_CM1_PARTITION,
+	.cm_inst	  = OMAP4430_CM1_MPU_INST,
+	.clkdm_offs	  = OMAP4430_CM1_MPU_MPU_CDOFFS,
+	.wkdep_srcs	  = mpu_wkup_sleep_deps,
+	.sleepdep_srcs	  = mpu_wkup_sleep_deps,
+	.flags		  = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
+	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
 static struct clockdomain l3_2_44xx_clkdm = {
 	.name		  = "l3_2_clkdm",
 	.pwrdm		  = { .name = "core_pwrdm" },
@@ -585,18 +598,6 @@ static struct clockdomain l3_1_44xx_clkdm = {
 	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
 };
 
-static struct clockdomain l3_d2d_44xx_clkdm = {
-	.name		  = "l3_d2d_clkdm",
-	.pwrdm		  = { .name = "core_pwrdm" },
-	.prcm_partition	  = OMAP4430_CM2_PARTITION,
-	.cm_inst	  = OMAP4430_CM2_CORE_INST,
-	.clkdm_offs	  = OMAP4430_CM2_CORE_D2D_CDOFFS,
-	.wkdep_srcs	  = l3_d2d_wkup_sleep_deps,
-	.sleepdep_srcs	  = l3_d2d_wkup_sleep_deps,
-	.flags		  = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
-	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
-};
-
 static struct clockdomain iss_44xx_clkdm = {
 	.name		  = "iss_clkdm",
 	.pwrdm		  = { .name = "cam_pwrdm" },
@@ -655,6 +656,7 @@ static struct clockdomain l3_dma_44xx_clkdm = {
 	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
 };
 
+/* As clockdomains are added or removed above, this list must also be changed */
 static struct clockdomain *clockdomains_omap44xx[] __initdata = {
 	&l4_cefuse_44xx_clkdm,
 	&l4_cfg_44xx_clkdm,
@@ -666,21 +668,21 @@ static struct clockdomain *clockdomains_omap44xx[] __initdata = {
 	&abe_44xx_clkdm,
 	&l3_instr_44xx_clkdm,
 	&l3_init_44xx_clkdm,
-	&mpuss_44xx_clkdm,
+	&d2d_44xx_clkdm,
 	&mpu0_44xx_clkdm,
 	&mpu1_44xx_clkdm,
 	&l3_emif_44xx_clkdm,
 	&l4_ao_44xx_clkdm,
 	&ducati_44xx_clkdm,
+	&mpu_44xx_clkdm,
 	&l3_2_44xx_clkdm,
 	&l3_1_44xx_clkdm,
-	&l3_d2d_44xx_clkdm,
 	&iss_44xx_clkdm,
 	&l3_dss_44xx_clkdm,
 	&l4_wkup_44xx_clkdm,
 	&emu_sys_44xx_clkdm,
 	&l3_dma_44xx_clkdm,
-	NULL,
+	NULL
 };
 
 void __init omap44xx_clockdomains_init(void)

arch/arm/mach-omap2/cm1_44xx.h

@@ -1,7 +1,7 @@
 /*
  * OMAP44xx CM1 instance offset macros
  *
- * Copyright (C) 2009-2010 Texas Instruments, Inc.
+ * Copyright (C) 2009-2011 Texas Instruments, Inc.
  * Copyright (C) 2009-2010 Nokia Corporation
  *
  * Paul Walmsley (paul@pwsan.com)
@@ -41,9 +41,9 @@
 #define OMAP4430_CM1_INSTR_INST		0x0f00
 
 /* CM1 clockdomain register offsets (from instance start) */
-#define OMAP4430_CM1_ABE_ABE_CDOFFS		0x0000
-#define OMAP4430_CM1_MPU_MPU_CDOFFS		0x0000
-#define OMAP4430_CM1_TESLA_TESLA_CDOFFS		0x0000
+#define OMAP4430_CM1_MPU_MPU_CDOFFS	0x0000
+#define OMAP4430_CM1_TESLA_TESLA_CDOFFS	0x0000
+#define OMAP4430_CM1_ABE_ABE_CDOFFS	0x0000
 
 /* CM1 */
 
@@ -82,8 +82,8 @@
 #define OMAP4430_CM_DIV_M7_DPLL_CORE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0044)
 #define OMAP4_CM_SSC_DELTAMSTEP_DPLL_CORE_OFFSET	0x0048
 #define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_CORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0048)
-#define OMAP4_CM_SSC_INSTFREQDIV_DPLL_CORE_OFFSET	0x004c
-#define OMAP4430_CM_SSC_INSTFREQDIV_DPLL_CORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x004c)
+#define OMAP4_CM_SSC_MODFREQDIV_DPLL_CORE_OFFSET	0x004c
+#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_CORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x004c)
 #define OMAP4_CM_EMU_OVERRIDE_DPLL_CORE_OFFSET		0x0050
 #define OMAP4430_CM_EMU_OVERRIDE_DPLL_CORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0050)
 #define OMAP4_CM_CLKMODE_DPLL_MPU_OFFSET		0x0060
@@ -98,8 +98,8 @@
 #define OMAP4430_CM_DIV_M2_DPLL_MPU			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0070)
 #define OMAP4_CM_SSC_DELTAMSTEP_DPLL_MPU_OFFSET		0x0088
 #define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_MPU		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0088)
-#define OMAP4_CM_SSC_INSTFREQDIV_DPLL_MPU_OFFSET		0x008c
-#define OMAP4430_CM_SSC_INSTFREQDIV_DPLL_MPU		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x008c)
+#define OMAP4_CM_SSC_MODFREQDIV_DPLL_MPU_OFFSET		0x008c
+#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_MPU		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x008c)
 #define OMAP4_CM_BYPCLK_DPLL_MPU_OFFSET			0x009c
 #define OMAP4430_CM_BYPCLK_DPLL_MPU			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x009c)
 #define OMAP4_CM_CLKMODE_DPLL_IVA_OFFSET		0x00a0
@@ -116,8 +116,8 @@
 #define OMAP4430_CM_DIV_M5_DPLL_IVA			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x00bc)
 #define OMAP4_CM_SSC_DELTAMSTEP_DPLL_IVA_OFFSET		0x00c8
 #define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_IVA		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x00c8)
-#define OMAP4_CM_SSC_INSTFREQDIV_DPLL_IVA_OFFSET		0x00cc
-#define OMAP4430_CM_SSC_INSTFREQDIV_DPLL_IVA		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x00cc)
+#define OMAP4_CM_SSC_MODFREQDIV_DPLL_IVA_OFFSET		0x00cc
+#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_IVA		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x00cc)
 #define OMAP4_CM_BYPCLK_DPLL_IVA_OFFSET			0x00dc
 #define OMAP4430_CM_BYPCLK_DPLL_IVA			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x00dc)
 #define OMAP4_CM_CLKMODE_DPLL_ABE_OFFSET		0x00e0
@@ -134,8 +134,8 @@
 #define OMAP4430_CM_DIV_M3_DPLL_ABE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x00f4)
 #define OMAP4_CM_SSC_DELTAMSTEP_DPLL_ABE_OFFSET		0x0108
 #define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_ABE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0108)
-#define OMAP4_CM_SSC_INSTFREQDIV_DPLL_ABE_OFFSET		0x010c
-#define OMAP4430_CM_SSC_INSTFREQDIV_DPLL_ABE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x010c)
+#define OMAP4_CM_SSC_MODFREQDIV_DPLL_ABE_OFFSET		0x010c
+#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_ABE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x010c)
 #define OMAP4_CM_CLKMODE_DPLL_DDRPHY_OFFSET		0x0120
 #define OMAP4430_CM_CLKMODE_DPLL_DDRPHY			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0120)
 #define OMAP4_CM_IDLEST_DPLL_DDRPHY_OFFSET		0x0124
@@ -154,8 +154,8 @@
 #define OMAP4430_CM_DIV_M6_DPLL_DDRPHY			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0140)
 #define OMAP4_CM_SSC_DELTAMSTEP_DPLL_DDRPHY_OFFSET	0x0148
 #define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_DDRPHY		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0148)
-#define OMAP4_CM_SSC_INSTFREQDIV_DPLL_DDRPHY_OFFSET	0x014c
-#define OMAP4430_CM_SSC_INSTFREQDIV_DPLL_DDRPHY		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x014c)
+#define OMAP4_CM_SSC_MODFREQDIV_DPLL_DDRPHY_OFFSET	0x014c
+#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_DDRPHY		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x014c)
 #define OMAP4_CM_SHADOW_FREQ_CONFIG1_OFFSET		0x0160
 #define OMAP4430_CM_SHADOW_FREQ_CONFIG1			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0160)
 #define OMAP4_CM_SHADOW_FREQ_CONFIG2_OFFSET		0x0164
@@ -217,42 +217,6 @@
 #define OMAP4_CM1_ABE_WDT3_CLKCTRL_OFFSET		0x0088
 #define OMAP4430_CM1_ABE_WDT3_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_INST, 0x0088)
 
-/* CM1.RESTORE_CM1 register offsets */
-#define OMAP4_CM_CLKSEL_CORE_RESTORE_OFFSET		0x0000
-#define OMAP4430_CM_CLKSEL_CORE_RESTORE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_INST, 0x0000)
-#define OMAP4_CM_DIV_M2_DPLL_CORE_RESTORE_OFFSET	0x0004
-#define OMAP4430_CM_DIV_M2_DPLL_CORE_RESTORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_INST, 0x0004)
-#define OMAP4_CM_DIV_M3_DPLL_CORE_RESTORE_OFFSET	0x0008
-#define OMAP4430_CM_DIV_M3_DPLL_CORE_RESTORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_INST, 0x0008)
-#define OMAP4_CM_DIV_M4_DPLL_CORE_RESTORE_OFFSET	0x000c
-#define OMAP4430_CM_DIV_M4_DPLL_CORE_RESTORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_INST, 0x000c)
-#define OMAP4_CM_DIV_M5_DPLL_CORE_RESTORE_OFFSET	0x0010
-#define OMAP4430_CM_DIV_M5_DPLL_CORE_RESTORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_INST, 0x0010)
-#define OMAP4_CM_DIV_M6_DPLL_CORE_RESTORE_OFFSET	0x0014
-#define OMAP4430_CM_DIV_M6_DPLL_CORE_RESTORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_INST, 0x0014)
-#define OMAP4_CM_DIV_M7_DPLL_CORE_RESTORE_OFFSET	0x0018
-#define OMAP4430_CM_DIV_M7_DPLL_CORE_RESTORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_INST, 0x0018)
-#define OMAP4_CM_CLKSEL_DPLL_CORE_RESTORE_OFFSET	0x001c
-#define OMAP4430_CM_CLKSEL_DPLL_CORE_RESTORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_INST, 0x001c)
-#define OMAP4_CM_SSC_DELTAMSTEP_DPLL_CORE_RESTORE_OFFSET	0x0020
-#define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_CORE_RESTORE	OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_INST, 0x0020)
-#define OMAP4_CM_SSC_INSTFREQDIV_DPLL_CORE_RESTORE_OFFSET	0x0024
-#define OMAP4430_CM_SSC_INSTFREQDIV_DPLL_CORE_RESTORE	OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_INST, 0x0024)
-#define OMAP4_CM_CLKMODE_DPLL_CORE_RESTORE_OFFSET	0x0028
-#define OMAP4430_CM_CLKMODE_DPLL_CORE_RESTORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_INST, 0x0028)
-#define OMAP4_CM_SHADOW_FREQ_CONFIG2_RESTORE_OFFSET	0x002c
-#define OMAP4430_CM_SHADOW_FREQ_CONFIG2_RESTORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_INST, 0x002c)
-#define OMAP4_CM_SHADOW_FREQ_CONFIG1_RESTORE_OFFSET	0x0030
-#define OMAP4430_CM_SHADOW_FREQ_CONFIG1_RESTORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_INST, 0x0030)
-#define OMAP4_CM_AUTOIDLE_DPLL_CORE_RESTORE_OFFSET	0x0034
-#define OMAP4430_CM_AUTOIDLE_DPLL_CORE_RESTORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_INST, 0x0034)
-#define OMAP4_CM_MPU_CLKSTCTRL_RESTORE_OFFSET		0x0038
-#define OMAP4430_CM_MPU_CLKSTCTRL_RESTORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_INST, 0x0038)
-#define OMAP4_CM_CM1_PROFILING_CLKCTRL_RESTORE_OFFSET	0x003c
-#define OMAP4430_CM_CM1_PROFILING_CLKCTRL_RESTORE	OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_INST, 0x003c)
-#define OMAP4_CM_DYN_DEP_PRESCAL_RESTORE_OFFSET		0x0040
-#define OMAP4430_CM_DYN_DEP_PRESCAL_RESTORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_INST, 0x0040)
-
 /* Function prototypes */
 extern u32 omap4_cm1_read_inst_reg(s16 inst, u16 idx);
 extern void omap4_cm1_write_inst_reg(u32 val, s16 inst, u16 idx);

arch/arm/mach-omap2/cm2_44xx.h

@@ -1,7 +1,7 @@
 /*
  * OMAP44xx CM2 instance offset macros
  *
- * Copyright (C) 2009-2010 Texas Instruments, Inc.
+ * Copyright (C) 2009-2011 Texas Instruments, Inc.
  * Copyright (C) 2009-2010 Nokia Corporation
  *
  * Paul Walmsley (paul@pwsan.com)
@@ -40,9 +40,9 @@
 #define OMAP4430_CM2_CAM_INST		0x1000
 #define OMAP4430_CM2_DSS_INST		0x1100
 #define OMAP4430_CM2_GFX_INST		0x1200
-#define OMAP4430_CM2_L3INIT_INST		0x1300
+#define OMAP4430_CM2_L3INIT_INST	0x1300
 #define OMAP4430_CM2_L4PER_INST		0x1400
-#define OMAP4430_CM2_CEFUSE_INST		0x1600
+#define OMAP4430_CM2_CEFUSE_INST	0x1600
 #define OMAP4430_CM2_RESTORE_INST	0x1e00
 #define OMAP4430_CM2_INSTR_INST		0x1f00
 
@@ -65,7 +65,6 @@
 #define OMAP4430_CM2_L4PER_L4SEC_CDOFFS		0x0180
 #define OMAP4430_CM2_CEFUSE_CEFUSE_CDOFFS	0x0000
 
-
 /* CM2 */
 
 /* CM2.OCP_SOCKET_CM2 register offsets */
@@ -121,8 +120,8 @@
 #define OMAP4430_CM_DIV_M7_DPLL_PER			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x0064)
 #define OMAP4_CM_SSC_DELTAMSTEP_DPLL_PER_OFFSET		0x0068
 #define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_PER		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x0068)
-#define OMAP4_CM_SSC_INSTFREQDIV_DPLL_PER_OFFSET		0x006c
-#define OMAP4430_CM_SSC_INSTFREQDIV_DPLL_PER		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x006c)
+#define OMAP4_CM_SSC_MODFREQDIV_DPLL_PER_OFFSET		0x006c
+#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_PER		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x006c)
 #define OMAP4_CM_CLKMODE_DPLL_USB_OFFSET		0x0080
 #define OMAP4430_CM_CLKMODE_DPLL_USB			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x0080)
 #define OMAP4_CM_IDLEST_DPLL_USB_OFFSET			0x0084
@@ -135,8 +134,8 @@
 #define OMAP4430_CM_DIV_M2_DPLL_USB			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x0090)
 #define OMAP4_CM_SSC_DELTAMSTEP_DPLL_USB_OFFSET		0x00a8
 #define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_USB		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x00a8)
-#define OMAP4_CM_SSC_INSTFREQDIV_DPLL_USB_OFFSET		0x00ac
-#define OMAP4430_CM_SSC_INSTFREQDIV_DPLL_USB		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x00ac)
+#define OMAP4_CM_SSC_MODFREQDIV_DPLL_USB_OFFSET		0x00ac
+#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_USB		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x00ac)
 #define OMAP4_CM_CLKDCOLDO_DPLL_USB_OFFSET		0x00b4
 #define OMAP4430_CM_CLKDCOLDO_DPLL_USB			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x00b4)
 #define OMAP4_CM_CLKMODE_DPLL_UNIPRO_OFFSET		0x00c0
@@ -151,8 +150,8 @@
 #define OMAP4430_CM_DIV_M2_DPLL_UNIPRO			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x00d0)
 #define OMAP4_CM_SSC_DELTAMSTEP_DPLL_UNIPRO_OFFSET	0x00e8
 #define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_UNIPRO		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x00e8)
-#define OMAP4_CM_SSC_INSTFREQDIV_DPLL_UNIPRO_OFFSET	0x00ec
-#define OMAP4430_CM_SSC_INSTFREQDIV_DPLL_UNIPRO		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x00ec)
+#define OMAP4_CM_SSC_MODFREQDIV_DPLL_UNIPRO_OFFSET	0x00ec
+#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_UNIPRO		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x00ec)
 
 /* CM2.ALWAYS_ON_CM2 register offsets */
 #define OMAP4_CM_ALWON_CLKSTCTRL_OFFSET			0x0000
@@ -227,8 +226,8 @@
 #define OMAP4430_CM_D2D_DYNAMICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0508)
 #define OMAP4_CM_D2D_SAD2D_CLKCTRL_OFFSET		0x0520
 #define OMAP4430_CM_D2D_SAD2D_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0520)
-#define OMAP4_CM_D2D_INSTEM_ICR_CLKCTRL_OFFSET		0x0528
-#define OMAP4430_CM_D2D_INSTEM_ICR_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0528)
+#define OMAP4_CM_D2D_MODEM_ICR_CLKCTRL_OFFSET		0x0528
+#define OMAP4430_CM_D2D_MODEM_ICR_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0528)
 #define OMAP4_CM_D2D_SAD2D_FW_CLKCTRL_OFFSET		0x0530
 #define OMAP4430_CM_D2D_SAD2D_FW_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0530)
 #define OMAP4_CM_L4CFG_CLKSTCTRL_OFFSET			0x0600
@@ -450,56 +449,6 @@
 #define OMAP4_CM_CEFUSE_CEFUSE_CLKCTRL_OFFSET		0x0020
 #define OMAP4430_CM_CEFUSE_CEFUSE_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CEFUSE_INST, 0x0020)
 
-/* CM2.RESTORE_CM2 register offsets */
-#define OMAP4_CM_L3_1_CLKSTCTRL_RESTORE_OFFSET		0x0000
-#define OMAP4430_CM_L3_1_CLKSTCTRL_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x0000)
-#define OMAP4_CM_L3_2_CLKSTCTRL_RESTORE_OFFSET		0x0004
-#define OMAP4430_CM_L3_2_CLKSTCTRL_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x0004)
-#define OMAP4_CM_L4CFG_CLKSTCTRL_RESTORE_OFFSET		0x0008
-#define OMAP4430_CM_L4CFG_CLKSTCTRL_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x0008)
-#define OMAP4_CM_MEMIF_CLKSTCTRL_RESTORE_OFFSET		0x000c
-#define OMAP4430_CM_MEMIF_CLKSTCTRL_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x000c)
-#define OMAP4_CM_L4PER_CLKSTCTRL_RESTORE_OFFSET		0x0010
-#define OMAP4430_CM_L4PER_CLKSTCTRL_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x0010)
-#define OMAP4_CM_L3INIT_CLKSTCTRL_RESTORE_OFFSET	0x0014
-#define OMAP4430_CM_L3INIT_CLKSTCTRL_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x0014)
-#define OMAP4_CM_L3INSTR_L3_3_CLKCTRL_RESTORE_OFFSET	0x0018
-#define OMAP4430_CM_L3INSTR_L3_3_CLKCTRL_RESTORE	OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x0018)
-#define OMAP4_CM_L3INSTR_L3_INSTR_CLKCTRL_RESTORE_OFFSET	0x001c
-#define OMAP4430_CM_L3INSTR_L3_INSTR_CLKCTRL_RESTORE	OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x001c)
-#define OMAP4_CM_L3INSTR_OCP_WP1_CLKCTRL_RESTORE_OFFSET	0x0020
-#define OMAP4430_CM_L3INSTR_OCP_WP1_CLKCTRL_RESTORE	OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x0020)
-#define OMAP4_CM_CM2_PROFILING_CLKCTRL_RESTORE_OFFSET	0x0024
-#define OMAP4430_CM_CM2_PROFILING_CLKCTRL_RESTORE	OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x0024)
-#define OMAP4_CM_D2D_STATICDEP_RESTORE_OFFSET		0x0028
-#define OMAP4430_CM_D2D_STATICDEP_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x0028)
-#define OMAP4_CM_L3_1_DYNAMICDEP_RESTORE_OFFSET		0x002c
-#define OMAP4430_CM_L3_1_DYNAMICDEP_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x002c)
-#define OMAP4_CM_L3_2_DYNAMICDEP_RESTORE_OFFSET		0x0030
-#define OMAP4430_CM_L3_2_DYNAMICDEP_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x0030)
-#define OMAP4_CM_D2D_DYNAMICDEP_RESTORE_OFFSET		0x0034
-#define OMAP4430_CM_D2D_DYNAMICDEP_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x0034)
-#define OMAP4_CM_L4CFG_DYNAMICDEP_RESTORE_OFFSET	0x0038
-#define OMAP4430_CM_L4CFG_DYNAMICDEP_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x0038)
-#define OMAP4_CM_L4PER_DYNAMICDEP_RESTORE_OFFSET	0x003c
-#define OMAP4430_CM_L4PER_DYNAMICDEP_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x003c)
-#define OMAP4_CM_L4PER_GPIO2_CLKCTRL_RESTORE_OFFSET	0x0040
-#define OMAP4430_CM_L4PER_GPIO2_CLKCTRL_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x0040)
-#define OMAP4_CM_L4PER_GPIO3_CLKCTRL_RESTORE_OFFSET	0x0044
-#define OMAP4430_CM_L4PER_GPIO3_CLKCTRL_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x0044)
-#define OMAP4_CM_L4PER_GPIO4_CLKCTRL_RESTORE_OFFSET	0x0048
-#define OMAP4430_CM_L4PER_GPIO4_CLKCTRL_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x0048)
-#define OMAP4_CM_L4PER_GPIO5_CLKCTRL_RESTORE_OFFSET	0x004c
-#define OMAP4430_CM_L4PER_GPIO5_CLKCTRL_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x004c)
-#define OMAP4_CM_L4PER_GPIO6_CLKCTRL_RESTORE_OFFSET	0x0050
-#define OMAP4430_CM_L4PER_GPIO6_CLKCTRL_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x0050)
-#define OMAP4_CM_L3INIT_USB_HOST_CLKCTRL_RESTORE_OFFSET	0x0054
-#define OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL_RESTORE	OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x0054)
-#define OMAP4_CM_L3INIT_USB_TLL_CLKCTRL_RESTORE_OFFSET	0x0058
-#define OMAP4430_CM_L3INIT_USB_TLL_CLKCTRL_RESTORE	OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x0058)
-#define OMAP4_CM_SDMA_STATICDEP_RESTORE_OFFSET		0x005c
-#define OMAP4430_CM_SDMA_STATICDEP_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x005c)
-
 /* Function prototypes */
 extern u32 omap4_cm2_read_inst_reg(s16 inst, u16 idx);
 extern void omap4_cm2_write_inst_reg(u32 val, s16 inst, u16 idx);

arch/arm/mach-omap2/common-board-devices.c

@@ -20,36 +20,15 @@
  *
  */
 
-#include <linux/i2c.h>
-#include <linux/i2c/twl.h>
-
 #include <linux/gpio.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
 
-#include <plat/i2c.h>
 #include <plat/mcspi.h>
 #include <plat/nand.h>
 
 #include "common-board-devices.h"
 
-static struct i2c_board_info __initdata pmic_i2c_board_info = {
-	.addr		= 0x48,
-	.flags		= I2C_CLIENT_WAKE,
-};
-
-void __init omap_pmic_init(int bus, u32 clkrate,
-			   const char *pmic_type, int pmic_irq,
-			   struct twl4030_platform_data *pmic_data)
-{
-	strncpy(pmic_i2c_board_info.type, pmic_type,
-		sizeof(pmic_i2c_board_info.type));
-	pmic_i2c_board_info.irq = pmic_irq;
-	pmic_i2c_board_info.platform_data = pmic_data;
-
-	omap_register_i2c_bus(bus, clkrate, &pmic_i2c_board_info, 1);
-}
-
 #if defined(CONFIG_TOUCHSCREEN_ADS7846) || \
 	defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
 static struct omap2_mcspi_device_config ads7846_mcspi_config = {
@@ -115,9 +94,7 @@ void __init omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce,
 #endif
 
 #if defined(CONFIG_MTD_NAND_OMAP2) || defined(CONFIG_MTD_NAND_OMAP2_MODULE)
-static struct omap_nand_platform_data nand_data = {
-	.dma_channel	= -1,		/* disable DMA in OMAP NAND driver */
-};
+static struct omap_nand_platform_data nand_data;
 
 void __init omap_nand_flash_init(int options, struct mtd_partition *parts,
 				 int nr_parts)
@@ -148,7 +125,7 @@ void __init omap_nand_flash_init(int options, struct mtd_partition *parts,
 		nand_data.cs = nandcs;
 		nand_data.parts = parts;
 		nand_data.nr_parts = nr_parts;
-		nand_data.options = options;
+		nand_data.devsize = options;
 
 		printk(KERN_INFO "Registering NAND on CS%d\n", nandcs);
 		if (gpmc_nand_init(&nand_data) < 0)

arch/arm/mach-omap2/common-board-devices.h

@@ -1,33 +1,11 @@
 #ifndef __OMAP_COMMON_BOARD_DEVICES__
 #define __OMAP_COMMON_BOARD_DEVICES__
 
+#include "twl-common.h"
+
 #define NAND_BLOCK_SIZE	SZ_128K
 
-struct twl4030_platform_data;
 struct mtd_partition;
-
-void omap_pmic_init(int bus, u32 clkrate, const char *pmic_type, int pmic_irq,
-		    struct twl4030_platform_data *pmic_data);
-
-static inline void omap2_pmic_init(const char *pmic_type,
-				   struct twl4030_platform_data *pmic_data)
-{
-	omap_pmic_init(2, 2600, pmic_type, INT_24XX_SYS_NIRQ, pmic_data);
-}
-
-static inline void omap3_pmic_init(const char *pmic_type,
-				   struct twl4030_platform_data *pmic_data)
-{
-	omap_pmic_init(1, 2600, pmic_type, INT_34XX_SYS_NIRQ, pmic_data);
-}
-
-static inline void omap4_pmic_init(const char *pmic_type,
-				   struct twl4030_platform_data *pmic_data)
-{
-	/* Phoenix Audio IC needs I2C1 to start with 400 KHz or less */
-	omap_pmic_init(1, 400, pmic_type, OMAP44XX_IRQ_SYS_1N, pmic_data);
-}
-
 struct ads7846_platform_data;
 
 void omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce,

arch/arm/mach-omap2/gpmc-nand.c

@@ -20,8 +20,6 @@
 #include <plat/board.h>
 #include <plat/gpmc.h>
 
-static struct omap_nand_platform_data *gpmc_nand_data;
-
 static struct resource gpmc_nand_resource = {
 	.flags		= IORESOURCE_MEM,
 };
@@ -33,7 +31,7 @@ static struct platform_device gpmc_nand_device = {
 	.resource	= &gpmc_nand_resource,
 };
 
-static int omap2_nand_gpmc_retime(void)
+static int omap2_nand_gpmc_retime(struct omap_nand_platform_data *gpmc_nand_data)
 {
 	struct gpmc_timings t;
 	int err;
@@ -83,13 +81,11 @@ static int omap2_nand_gpmc_retime(void)
 	return 0;
 }
 
-int __init gpmc_nand_init(struct omap_nand_platform_data *_nand_data)
+int __init gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data)
 {
 	int err	= 0;
 	struct device *dev = &gpmc_nand_device.dev;
 
-	gpmc_nand_data = _nand_data;
-	gpmc_nand_data->nand_setup = omap2_nand_gpmc_retime;
 	gpmc_nand_device.dev.platform_data = gpmc_nand_data;
 
 	err = gpmc_cs_request(gpmc_nand_data->cs, NAND_IO_SIZE,
@@ -100,7 +96,7 @@ int __init gpmc_nand_init(struct omap_nand_platform_data *_nand_data)
 	}
 
 	 /* Set timings in GPMC */
-	err = omap2_nand_gpmc_retime();
+	err = omap2_nand_gpmc_retime(gpmc_nand_data);
 	if (err < 0) {
 		dev_err(dev, "Unable to set gpmc timings: %d\n", err);
 		return err;

arch/arm/mach-omap2/io.c

@@ -333,23 +333,9 @@ static int _set_hwmod_postsetup_state(struct omap_hwmod *oh, void *data)
 	return omap_hwmod_set_postsetup_state(oh, *(u8 *)data);
 }
 
+/* See irq.c, omap4-common.c and entry-macro.S */
 void __iomem *omap_irq_base;
 
-/*
- * Initialize asm_irq_base for entry-macro.S
- */
-static inline void omap_irq_base_init(void)
-{
-	if (cpu_is_omap24xx())
-		omap_irq_base = OMAP2_L4_IO_ADDRESS(OMAP24XX_IC_BASE);
-	else if (cpu_is_omap34xx())
-		omap_irq_base = OMAP2_L4_IO_ADDRESS(OMAP34XX_IC_BASE);
-	else if (cpu_is_omap44xx())
-		omap_irq_base = OMAP2_L4_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE);
-	else
-		pr_err("Could not initialize omap_irq_base\n");
-}
-
 void __init omap2_init_common_infrastructure(void)
 {
 	u8 postsetup_state;
@@ -422,7 +408,6 @@ void __init omap2_init_common_devices(struct omap_sdrc_params *sdrc_cs0,
 		_omap2_init_reprogram_sdrc();
 	}
 
-	omap_irq_base_init();
 }
 
 /*

arch/arm/mach-omap2/irq.c

@@ -141,25 +141,20 @@ omap_alloc_gc(void __iomem *base, unsigned int irq_start, unsigned int num)
 				IRQ_NOREQUEST | IRQ_NOPROBE, 0);
 }
 
-void __init omap_init_irq(void)
+static void __init omap_init_irq(u32 base, int nr_irqs)
 {
 	unsigned long nr_of_irqs = 0;
 	unsigned int nr_banks = 0;
 	int i, j;
 
+	omap_irq_base = ioremap(base, SZ_4K);
+	if (WARN_ON(!omap_irq_base))
+		return;
+
 	for (i = 0; i < ARRAY_SIZE(irq_banks); i++) {
-		unsigned long base = 0;
 		struct omap_irq_bank *bank = irq_banks + i;
 
-		if (cpu_is_omap24xx())
-			base = OMAP24XX_IC_BASE;
-		else if (cpu_is_omap34xx())
-			base = OMAP34XX_IC_BASE;
-
-		BUG_ON(!base);
-
-		if (cpu_is_ti816x())
-			bank->nr_irqs = 128;
+		bank->nr_irqs = nr_irqs;
 
 		/* Static mapping, never released */
 		bank->base_reg = ioremap(base, SZ_4K);
@@ -181,6 +176,21 @@ void __init omap_init_irq(void)
 	       nr_of_irqs, nr_banks, nr_banks > 1 ? "s" : "");
 }
 
+void __init omap2_init_irq(void)
+{
+	omap_init_irq(OMAP24XX_IC_BASE, 96);
+}
+
+void __init omap3_init_irq(void)
+{
+	omap_init_irq(OMAP34XX_IC_BASE, 96);
+}
+
+void __init ti816x_init_irq(void)
+{
+	omap_init_irq(OMAP34XX_IC_BASE, 128);
+}
+
 #ifdef CONFIG_ARCH_OMAP3
 static struct omap3_intc_regs intc_context[ARRAY_SIZE(irq_banks)];
 

arch/arm/mach-omap2/omap4-common.c

@@ -19,6 +19,8 @@
 #include <asm/hardware/gic.h>
 #include <asm/hardware/cache-l2x0.h>
 
+#include <plat/irqs.h>
+
 #include <mach/hardware.h>
 #include <mach/omap4-common.h>
 
@@ -31,17 +33,15 @@ void __iomem *gic_dist_base_addr;
 
 void __init gic_init_irq(void)
 {
-	void __iomem *gic_cpu_base;
-
 	/* Static mapping, never released */
 	gic_dist_base_addr = ioremap(OMAP44XX_GIC_DIST_BASE, SZ_4K);
 	BUG_ON(!gic_dist_base_addr);
 
 	/* Static mapping, never released */
-	gic_cpu_base = ioremap(OMAP44XX_GIC_CPU_BASE, SZ_512);
-	BUG_ON(!gic_cpu_base);
+	omap_irq_base = ioremap(OMAP44XX_GIC_CPU_BASE, SZ_512);
+	BUG_ON(!omap_irq_base);
 
-	gic_init(0, 29, gic_dist_base_addr, gic_cpu_base);
+	gic_init(0, 29, gic_dist_base_addr, omap_irq_base);
 }
 
 #ifdef CONFIG_CACHE_L2X0

arch/arm/mach-omap2/omap_hwmod.c

@@ -2,6 +2,7 @@
  * omap_hwmod implementation for OMAP2/3/4
  *
  * Copyright (C) 2009-2011 Nokia Corporation
+ * Copyright (C) 2011 Texas Instruments, Inc.
  *
  * Paul Walmsley, Benoît Cousson, Kevin Hilman
  *
@@ -387,11 +388,10 @@ static int _set_module_autoidle(struct omap_hwmod *oh, u8 autoidle,
  */
 static int _enable_wakeup(struct omap_hwmod *oh, u32 *v)
 {
-	u32 wakeup_mask;
-
 	if (!oh->class->sysc ||
 	    !((oh->class->sysc->sysc_flags & SYSC_HAS_ENAWAKEUP) ||
-	      (oh->class->sysc->idlemodes & SIDLE_SMART_WKUP)))
+	      (oh->class->sysc->idlemodes & SIDLE_SMART_WKUP) ||
+	      (oh->class->sysc->idlemodes & MSTANDBY_SMART_WKUP)))
 		return -EINVAL;
 
 	if (!oh->class->sysc->sysc_fields) {
@@ -399,12 +399,13 @@ static int _enable_wakeup(struct omap_hwmod *oh, u32 *v)
 		return -EINVAL;
 	}
 
-	wakeup_mask = (0x1 << oh->class->sysc->sysc_fields->enwkup_shift);
-
-	*v |= wakeup_mask;
+	if (oh->class->sysc->sysc_flags & SYSC_HAS_ENAWAKEUP)
+		*v |= 0x1 << oh->class->sysc->sysc_fields->enwkup_shift;
 
 	if (oh->class->sysc->idlemodes & SIDLE_SMART_WKUP)
 		_set_slave_idlemode(oh, HWMOD_IDLEMODE_SMART_WKUP, v);
+	if (oh->class->sysc->idlemodes & MSTANDBY_SMART_WKUP)
+		_set_master_standbymode(oh, HWMOD_IDLEMODE_SMART_WKUP, v);
 
 	/* XXX test pwrdm_get_wken for this hwmod's subsystem */
 
@@ -422,11 +423,10 @@ static int _enable_wakeup(struct omap_hwmod *oh, u32 *v)
  */
 static int _disable_wakeup(struct omap_hwmod *oh, u32 *v)
 {
-	u32 wakeup_mask;
-
 	if (!oh->class->sysc ||
 	    !((oh->class->sysc->sysc_flags & SYSC_HAS_ENAWAKEUP) ||
-	      (oh->class->sysc->idlemodes & SIDLE_SMART_WKUP)))
+	      (oh->class->sysc->idlemodes & SIDLE_SMART_WKUP) ||
+	      (oh->class->sysc->idlemodes & MSTANDBY_SMART_WKUP)))
 		return -EINVAL;
 
 	if (!oh->class->sysc->sysc_fields) {
@@ -434,12 +434,13 @@ static int _disable_wakeup(struct omap_hwmod *oh, u32 *v)
 		return -EINVAL;
 	}
 
-	wakeup_mask = (0x1 << oh->class->sysc->sysc_fields->enwkup_shift);
-
-	*v &= ~wakeup_mask;
+	if (oh->class->sysc->sysc_flags & SYSC_HAS_ENAWAKEUP)
+		*v &= ~(0x1 << oh->class->sysc->sysc_fields->enwkup_shift);
 
 	if (oh->class->sysc->idlemodes & SIDLE_SMART_WKUP)
 		_set_slave_idlemode(oh, HWMOD_IDLEMODE_SMART, v);
+	if (oh->class->sysc->idlemodes & MSTANDBY_SMART_WKUP)
+		_set_master_standbymode(oh, HWMOD_IDLEMODE_SMART_WKUP, v);
 
 	/* XXX test pwrdm_get_wken for this hwmod's subsystem */
 
@@ -677,6 +678,75 @@ static void _disable_optional_clocks(struct omap_hwmod *oh)
 		}
 }
 
+/**
+ * _count_mpu_irqs - count the number of MPU IRQ lines associated with @oh
+ * @oh: struct omap_hwmod *oh
+ *
+ * Count and return the number of MPU IRQs associated with the hwmod
+ * @oh.  Used to allocate struct resource data.  Returns 0 if @oh is
+ * NULL.
+ */
+static int _count_mpu_irqs(struct omap_hwmod *oh)
+{
+	struct omap_hwmod_irq_info *ohii;
+	int i = 0;
+
+	if (!oh || !oh->mpu_irqs)
+		return 0;
+
+	do {
+		ohii = &oh->mpu_irqs[i++];
+	} while (ohii->irq != -1);
+
+	return i;
+}
+
+/**
+ * _count_sdma_reqs - count the number of SDMA request lines associated with @oh
+ * @oh: struct omap_hwmod *oh
+ *
+ * Count and return the number of SDMA request lines associated with
+ * the hwmod @oh.  Used to allocate struct resource data.  Returns 0
+ * if @oh is NULL.
+ */
+static int _count_sdma_reqs(struct omap_hwmod *oh)
+{
+	struct omap_hwmod_dma_info *ohdi;
+	int i = 0;
+
+	if (!oh || !oh->sdma_reqs)
+		return 0;
+
+	do {
+		ohdi = &oh->sdma_reqs[i++];
+	} while (ohdi->dma_req != -1);
+
+	return i;
+}
+
+/**
+ * _count_ocp_if_addr_spaces - count the number of address space entries for @oh
+ * @oh: struct omap_hwmod *oh
+ *
+ * Count and return the number of address space ranges associated with
+ * the hwmod @oh.  Used to allocate struct resource data.  Returns 0
+ * if @oh is NULL.
+ */
+static int _count_ocp_if_addr_spaces(struct omap_hwmod_ocp_if *os)
+{
+	struct omap_hwmod_addr_space *mem;
+	int i = 0;
+
+	if (!os || !os->addr)
+		return 0;
+
+	do {
+		mem = &os->addr[i++];
+	} while (mem->pa_start != mem->pa_end);
+
+	return i;
+}
+
 /**
  * _find_mpu_port_index - find hwmod OCP slave port ID intended for MPU use
  * @oh: struct omap_hwmod *
@@ -722,8 +792,7 @@ static void __iomem * __init _find_mpu_rt_base(struct omap_hwmod *oh, u8 index)
 {
 	struct omap_hwmod_ocp_if *os;
 	struct omap_hwmod_addr_space *mem;
-	int i;
-	int found = 0;
+	int i = 0, found = 0;
 	void __iomem *va_start;
 
 	if (!oh || oh->slaves_cnt == 0)
@@ -731,12 +800,14 @@ static void __iomem * __init _find_mpu_rt_base(struct omap_hwmod *oh, u8 index)
 
 	os = oh->slaves[index];
 
-	for (i = 0, mem = os->addr; i < os->addr_cnt; i++, mem++) {
-		if (mem->flags & ADDR_TYPE_RT) {
+	if (!os->addr)
+		return NULL;
+
+	do {
+		mem = &os->addr[i++];
+		if (mem->flags & ADDR_TYPE_RT)
 			found = 1;
-			break;
-		}
-	}
+	} while (!found && mem->pa_start != mem->pa_end);
 
 	if (found) {
 		va_start = ioremap(mem->pa_start, mem->pa_end - mem->pa_start);
@@ -781,8 +852,16 @@ static void _enable_sysc(struct omap_hwmod *oh)
 	}
 
 	if (sf & SYSC_HAS_MIDLEMODE) {
-		idlemode = (oh->flags & HWMOD_SWSUP_MSTANDBY) ?
-			HWMOD_IDLEMODE_NO : HWMOD_IDLEMODE_SMART;
+		if (oh->flags & HWMOD_SWSUP_MSTANDBY) {
+			idlemode = HWMOD_IDLEMODE_NO;
+		} else {
+			if (sf & SYSC_HAS_ENAWAKEUP)
+				_enable_wakeup(oh, &v);
+			if (oh->class->sysc->idlemodes & MSTANDBY_SMART_WKUP)
+				idlemode = HWMOD_IDLEMODE_SMART_WKUP;
+			else
+				idlemode = HWMOD_IDLEMODE_SMART;
+		}
 		_set_master_standbymode(oh, idlemode, &v);
 	}
 
@@ -840,8 +919,16 @@ static void _idle_sysc(struct omap_hwmod *oh)
 	}
 
 	if (sf & SYSC_HAS_MIDLEMODE) {
-		idlemode = (oh->flags & HWMOD_SWSUP_MSTANDBY) ?
-			HWMOD_IDLEMODE_FORCE : HWMOD_IDLEMODE_SMART;
+		if (oh->flags & HWMOD_SWSUP_MSTANDBY) {
+			idlemode = HWMOD_IDLEMODE_FORCE;
+		} else {
+			if (sf & SYSC_HAS_ENAWAKEUP)
+				_enable_wakeup(oh, &v);
+			if (oh->class->sysc->idlemodes & MSTANDBY_SMART_WKUP)
+				idlemode = HWMOD_IDLEMODE_SMART_WKUP;
+			else
+				idlemode = HWMOD_IDLEMODE_SMART;
+		}
 		_set_master_standbymode(oh, idlemode, &v);
 	}
 
@@ -928,6 +1015,8 @@ static int _init_clocks(struct omap_hwmod *oh, void *data)
 
 	if (!ret)
 		oh->_state = _HWMOD_STATE_CLKS_INITED;
+	else
+		pr_warning("omap_hwmod: %s: cannot _init_clocks\n", oh->name);
 
 	return ret;
 }
@@ -1224,6 +1313,8 @@ static int _enable(struct omap_hwmod *oh)
 {
 	int r;
 
+	pr_debug("omap_hwmod: %s: enabling\n", oh->name);
+
 	if (oh->_state != _HWMOD_STATE_INITIALIZED &&
 	    oh->_state != _HWMOD_STATE_IDLE &&
 	    oh->_state != _HWMOD_STATE_DISABLED) {
@@ -1232,17 +1323,6 @@ static int _enable(struct omap_hwmod *oh)
 		return -EINVAL;
 	}
 
-	pr_debug("omap_hwmod: %s: enabling\n", oh->name);
-
-	/*
-	 * If an IP contains only one HW reset line, then de-assert it in order
-	 * to allow to enable the clocks. Otherwise the PRCM will return
-	 * Intransition status, and the init will failed.
-	 */
-	if ((oh->_state == _HWMOD_STATE_INITIALIZED ||
-	     oh->_state == _HWMOD_STATE_DISABLED) && oh->rst_lines_cnt == 1)
-		_deassert_hardreset(oh, oh->rst_lines[0].name);
-
 	/* Mux pins for device runtime if populated */
 	if (oh->mux && (!oh->mux->enabled ||
 			((oh->_state == _HWMOD_STATE_IDLE) &&
@@ -1252,20 +1332,31 @@ static int _enable(struct omap_hwmod *oh)
 	_add_initiator_dep(oh, mpu_oh);
 	_enable_clocks(oh);
 
-	r = _wait_target_ready(oh);
-	if (!r) {
-		oh->_state = _HWMOD_STATE_ENABLED;
+	/*
+	 * If an IP contains only one HW reset line, then de-assert it in order
+	 * to allow the module state transition. Otherwise the PRCM will return
+	 * Intransition status, and the init will failed.
+	 */
+	if ((oh->_state == _HWMOD_STATE_INITIALIZED ||
+	     oh->_state == _HWMOD_STATE_DISABLED) && oh->rst_lines_cnt == 1)
+		_deassert_hardreset(oh, oh->rst_lines[0].name);
 
-		/* Access the sysconfig only if the target is ready */
-		if (oh->class->sysc) {
-			if (!(oh->_int_flags & _HWMOD_SYSCONFIG_LOADED))
-				_update_sysc_cache(oh);
-			_enable_sysc(oh);
-		}
-	} else {
-		_disable_clocks(oh);
+	r = _wait_target_ready(oh);
+	if (r) {
 		pr_debug("omap_hwmod: %s: _wait_target_ready: %d\n",
 			 oh->name, r);
+		_disable_clocks(oh);
+
+		return r;
+	}
+
+	oh->_state = _HWMOD_STATE_ENABLED;
+
+	/* Access the sysconfig only if the target is ready */
+	if (oh->class->sysc) {
+		if (!(oh->_int_flags & _HWMOD_SYSCONFIG_LOADED))
+			_update_sysc_cache(oh);
+		_enable_sysc(oh);
 	}
 
 	return r;
@@ -1281,14 +1372,14 @@ static int _enable(struct omap_hwmod *oh)
  */
 static int _idle(struct omap_hwmod *oh)
 {
+	pr_debug("omap_hwmod: %s: idling\n", oh->name);
+
 	if (oh->_state != _HWMOD_STATE_ENABLED) {
 		WARN(1, "omap_hwmod: %s: idle state can only be entered from "
 		     "enabled state\n", oh->name);
 		return -EINVAL;
 	}
 
-	pr_debug("omap_hwmod: %s: idling\n", oh->name);
-
 	if (oh->class->sysc)
 		_idle_sysc(oh);
 	_del_initiator_dep(oh, mpu_oh);
@@ -1374,15 +1465,11 @@ static int _shutdown(struct omap_hwmod *oh)
 		}
 	}
 
-	if (oh->class->sysc)
+	if (oh->class->sysc) {
+		if (oh->_state == _HWMOD_STATE_IDLE)
+			_enable(oh);
 		_shutdown_sysc(oh);
-
-	/*
-	 * If an IP contains only one HW reset line, then assert it
-	 * before disabling the clocks and shutting down the IP.
-	 */
-	if (oh->rst_lines_cnt == 1)
-		_assert_hardreset(oh, oh->rst_lines[0].name);
+	}
 
 	/* clocks and deps are already disabled in idle */
 	if (oh->_state == _HWMOD_STATE_ENABLED) {
@@ -1392,6 +1479,13 @@ static int _shutdown(struct omap_hwmod *oh)
 	}
 	/* XXX Should this code also force-disable the optional clocks? */
 
+	/*
+	 * If an IP contains only one HW reset line, then assert it
+	 * after disabling the clocks and before shutting down the IP.
+	 */
+	if (oh->rst_lines_cnt == 1)
+		_assert_hardreset(oh, oh->rst_lines[0].name);
+
 	/* Mux pins to safe mode or use populated off mode values */
 	if (oh->mux)
 		omap_hwmod_mux(oh->mux, _HWMOD_STATE_DISABLED);
@@ -1685,9 +1779,6 @@ static int __init _populate_mpu_rt_base(struct omap_hwmod *oh, void *data)
 		return 0;
 
 	oh->_mpu_rt_va = _find_mpu_rt_base(oh, oh->_mpu_port_index);
-	if (!oh->_mpu_rt_va)
-		pr_warning("omap_hwmod: %s found no _mpu_rt_va for %s\n",
-				__func__, oh->name);
 
 	return 0;
 }
@@ -1939,10 +2030,10 @@ int omap_hwmod_count_resources(struct omap_hwmod *oh)
 {
 	int ret, i;
 
-	ret = oh->mpu_irqs_cnt + oh->sdma_reqs_cnt;
+	ret = _count_mpu_irqs(oh) + _count_sdma_reqs(oh);
 
 	for (i = 0; i < oh->slaves_cnt; i++)
-		ret += oh->slaves[i]->addr_cnt;
+		ret += _count_ocp_if_addr_spaces(oh->slaves[i]);
 
 	return ret;
 }
@@ -1959,12 +2050,13 @@ int omap_hwmod_count_resources(struct omap_hwmod *oh)
  */
 int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res)
 {
-	int i, j;
+	int i, j, mpu_irqs_cnt, sdma_reqs_cnt;
 	int r = 0;
 
 	/* For each IRQ, DMA, memory area, fill in array.*/
 
-	for (i = 0; i < oh->mpu_irqs_cnt; i++) {
+	mpu_irqs_cnt = _count_mpu_irqs(oh);
+	for (i = 0; i < mpu_irqs_cnt; i++) {
 		(res + r)->name = (oh->mpu_irqs + i)->name;
 		(res + r)->start = (oh->mpu_irqs + i)->irq;
 		(res + r)->end = (oh->mpu_irqs + i)->irq;
@@ -1972,7 +2064,8 @@ int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res)
 		r++;
 	}
 
-	for (i = 0; i < oh->sdma_reqs_cnt; i++) {
+	sdma_reqs_cnt = _count_sdma_reqs(oh);
+	for (i = 0; i < sdma_reqs_cnt; i++) {
 		(res + r)->name = (oh->sdma_reqs + i)->name;
 		(res + r)->start = (oh->sdma_reqs + i)->dma_req;
 		(res + r)->end = (oh->sdma_reqs + i)->dma_req;
@@ -1982,10 +2075,12 @@ int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res)
 
 	for (i = 0; i < oh->slaves_cnt; i++) {
 		struct omap_hwmod_ocp_if *os;
+		int addr_cnt;
 
 		os = oh->slaves[i];
+		addr_cnt = _count_ocp_if_addr_spaces(os);
 
-		for (j = 0; j < os->addr_cnt; j++) {
+		for (j = 0; j < addr_cnt; j++) {
 			(res + r)->name = (os->addr + j)->name;
 			(res + r)->start = (os->addr + j)->pa_start;
 			(res + r)->end = (os->addr + j)->pa_end;