Merge branch 'for-greg' of master.kernel.org:/pub/scm/linux/kernel/git/balbi/usb into usb-linus

* 'for-greg' of master.kernel.org:/pub/scm/linux/kernel/git/balbi/usb:
  usb: musb: fix oops on musb_gadget_pullup
  usb: host: ehci-omap: fix .remove and failure handling path of .probe(v1)
  usb: gadget: hid: don't STALL when processing a HID Descriptor request
  usb: musb: fix Kconfig
  usb: musb: tusb6010_omap: fix build failure: error: 'musb' undeclared
  usb: gadget: composite: fix bMaxPacketSize for SuperSpeed
  usb: gadget: fusb300: remove #if 0 block
  usb: gadget: s3c2410_udc: fix unterminated platform_device_id table

drivers/usb/gadget/Kconfig

@@ -310,7 +310,7 @@ config USB_PXA_U2O
 # musb builds in ../musb along with host support
 config USB_GADGET_MUSB_HDRC
 	tristate "Inventra HDRC USB Peripheral (TI, ADI, ...)"
-	depends on USB_MUSB_HDRC && (USB_MUSB_PERIPHERAL || USB_MUSB_OTG)
+	depends on USB_MUSB_HDRC
 	select USB_GADGET_DUALSPEED
 	help
 	  This OTG-capable silicon IP is used in dual designs including

drivers/usb/gadget/composite.c

@@ -1079,10 +1079,12 @@ composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
 			cdev->desc.bMaxPacketSize0 =
 				cdev->gadget->ep0->maxpacket;
 			if (gadget_is_superspeed(gadget)) {
-				if (gadget->speed >= USB_SPEED_SUPER)
+				if (gadget->speed >= USB_SPEED_SUPER) {
 					cdev->desc.bcdUSB = cpu_to_le16(0x0300);
-				else
+					cdev->desc.bMaxPacketSize0 = 9;
+				} else {
 					cdev->desc.bcdUSB = cpu_to_le16(0x0210);
+				}
 			}
 
 			value = min(w_length, (u16) sizeof cdev->desc);

drivers/usb/gadget/f_hid.c

@@ -367,6 +367,13 @@ static int hidg_setup(struct usb_function *f,
 	case ((USB_DIR_IN | USB_TYPE_STANDARD | USB_RECIP_INTERFACE) << 8
 		  | USB_REQ_GET_DESCRIPTOR):
 		switch (value >> 8) {
+		case HID_DT_HID:
+			VDBG(cdev, "USB_REQ_GET_DESCRIPTOR: HID\n");
+			length = min_t(unsigned short, length,
+						   hidg_desc.bLength);
+			memcpy(req->buf, &hidg_desc, length);
+			goto respond;
+			break;
 		case HID_DT_REPORT:
 			VDBG(cdev, "USB_REQ_GET_DESCRIPTOR: REPORT\n");
 			length = min_t(unsigned short, length,

drivers/usb/gadget/fusb300_udc.c

@@ -609,107 +609,6 @@ void fusb300_rdcxf(struct fusb300 *fusb300,
 	}
 }
 
-#if 0
-static void fusb300_dbg_fifo(struct fusb300_ep *ep,
-				u8 entry, u16 length)
-{
-	u32 reg;
-	u32 i = 0;
-	u32 j = 0;
-
-	reg = ioread32(ep->fusb300->reg + FUSB300_OFFSET_GTM);
-	reg &= ~(FUSB300_GTM_TST_EP_ENTRY(0xF) |
-		FUSB300_GTM_TST_EP_NUM(0xF) | FUSB300_GTM_TST_FIFO_DEG);
-	reg |= (FUSB300_GTM_TST_EP_ENTRY(entry) |
-		FUSB300_GTM_TST_EP_NUM(ep->epnum) | FUSB300_GTM_TST_FIFO_DEG);
-	iowrite32(reg, ep->fusb300->reg + FUSB300_OFFSET_GTM);
-
-	for (i = 0; i < (length >> 2); i++) {
-		if (i * 4 == 1024)
-			break;
-		reg = ioread32(ep->fusb300->reg +
-			FUSB300_OFFSET_BUFDBG_START + i * 4);
-		printk(KERN_DEBUG"  0x%-8x", reg);
-		j++;
-		if ((j % 4)  == 0)
-			printk(KERN_DEBUG "\n");
-	}
-
-	if (length % 4) {
-		reg = ioread32(ep->fusb300->reg +
-			FUSB300_OFFSET_BUFDBG_START + i * 4);
-		printk(KERN_DEBUG "  0x%x\n", reg);
-	}
-
-	if ((j % 4)  != 0)
-		printk(KERN_DEBUG "\n");
-
-	fusb300_disable_bit(ep->fusb300, FUSB300_OFFSET_GTM,
-		FUSB300_GTM_TST_FIFO_DEG);
-}
-
-static void fusb300_cmp_dbg_fifo(struct fusb300_ep *ep,
-				u8 entry, u16 length, u8 *golden)
-{
-	u32 reg;
-	u32 i = 0;
-	u32 golden_value;
-	u8 *tmp;
-
-	tmp = golden;
-
-	printk(KERN_DEBUG "fusb300_cmp_dbg_fifo (entry %d) : start\n", entry);
-
-	reg = ioread32(ep->fusb300->reg + FUSB300_OFFSET_GTM);
-	reg &= ~(FUSB300_GTM_TST_EP_ENTRY(0xF) |
-		FUSB300_GTM_TST_EP_NUM(0xF) | FUSB300_GTM_TST_FIFO_DEG);
-	reg |= (FUSB300_GTM_TST_EP_ENTRY(entry) |
-		FUSB300_GTM_TST_EP_NUM(ep->epnum) | FUSB300_GTM_TST_FIFO_DEG);
-	iowrite32(reg, ep->fusb300->reg + FUSB300_OFFSET_GTM);
-
-	for (i = 0; i < (length >> 2); i++) {
-		if (i * 4 == 1024)
-			break;
-		golden_value = *tmp | *(tmp + 1) << 8 |
-				*(tmp + 2) << 16 | *(tmp + 3) << 24;
-
-		reg = ioread32(ep->fusb300->reg +
-			FUSB300_OFFSET_BUFDBG_START + i*4);
-
-		if (reg != golden_value) {
-			printk(KERN_DEBUG "0x%x  :  ", (u32)(ep->fusb300->reg +
-				FUSB300_OFFSET_BUFDBG_START + i*4));
-			printk(KERN_DEBUG "    golden = 0x%x, reg = 0x%x\n",
-				golden_value, reg);
-		}
-		tmp += 4;
-	}
-
-	switch (length % 4) {
-	case 1:
-		golden_value = *tmp;
-	case 2:
-		golden_value = *tmp | *(tmp + 1) << 8;
-	case 3:
-		golden_value = *tmp | *(tmp + 1) << 8 | *(tmp + 2) << 16;
-	default:
-		break;
-
-	reg = ioread32(ep->fusb300->reg + FUSB300_OFFSET_BUFDBG_START + i*4);
-	if (reg != golden_value) {
-		printk(KERN_DEBUG "0x%x:", (u32)(ep->fusb300->reg +
-			FUSB300_OFFSET_BUFDBG_START + i*4));
-		printk(KERN_DEBUG "  golden = 0x%x, reg = 0x%x\n",
-			golden_value, reg);
-	}
-	}
-
-	printk(KERN_DEBUG "fusb300_cmp_dbg_fifo : end\n");
-	fusb300_disable_bit(ep->fusb300, FUSB300_OFFSET_GTM,
-		FUSB300_GTM_TST_FIFO_DEG);
-}
-#endif
-
 static void fusb300_rdfifo(struct fusb300_ep *ep,
 			  struct fusb300_request *req,
 			  u32 length)

drivers/usb/gadget/s3c2410_udc.c

@@ -2060,6 +2060,7 @@ static int s3c2410_udc_resume(struct platform_device *pdev)
 static const struct platform_device_id s3c_udc_ids[] = {
 	{ "s3c2410-usbgadget", },
 	{ "s3c2440-usbgadget", },
+	{ }
 };
 MODULE_DEVICE_TABLE(platform, s3c_udc_ids);
 

drivers/usb/host/ehci-omap.c

@@ -98,6 +98,18 @@ static void omap_ehci_soft_phy_reset(struct platform_device *pdev, u8 port)
 	}
 }
 
+static void disable_put_regulator(
+		struct ehci_hcd_omap_platform_data *pdata)
+{
+	int i;
+
+	for (i = 0 ; i < OMAP3_HS_USB_PORTS ; i++) {
+		if (pdata->regulator[i]) {
+			regulator_disable(pdata->regulator[i]);
+			regulator_put(pdata->regulator[i]);
+		}
+	}
+}
 
 /* configure so an HC device and id are always provided */
 /* always called with process context; sleeping is OK */
@@ -231,9 +243,11 @@ err_add_hcd:
 	omap_usbhs_disable(dev);
 
 err_enable:
+	disable_put_regulator(pdata);
 	usb_put_hcd(hcd);
 
 err_io:
+	iounmap(regs);
 	return ret;
 }
 
@@ -253,6 +267,8 @@ static int ehci_hcd_omap_remove(struct platform_device *pdev)
 
 	usb_remove_hcd(hcd);
 	omap_usbhs_disable(dev);
+	disable_put_regulator(dev->platform_data);
+	iounmap(hcd->regs);
 	usb_put_hcd(hcd);
 	return 0;
 }

drivers/usb/musb/Kconfig

@@ -3,9 +3,6 @@
 # for silicon based on Mentor Graphics INVENTRA designs
 #
 
-comment "Enable Host or Gadget support to see Inventra options"
-	depends on !USB && USB_GADGET=n
-
 # (M)HDRC = (Multipoint) Highspeed Dual-Role Controller
 config USB_MUSB_HDRC
 	depends on USB && USB_GADGET

drivers/usb/musb/musb_gadget.c

@@ -1698,6 +1698,8 @@ static int musb_gadget_pullup(struct usb_gadget *gadget, int is_on)
 
 	is_on = !!is_on;
 
+	pm_runtime_get_sync(musb->controller);
+
 	/* NOTE: this assumes we are sensing vbus; we'd rather
 	 * not pullup unless the B-session is active.
 	 */
@@ -1707,6 +1709,9 @@ static int musb_gadget_pullup(struct usb_gadget *gadget, int is_on)
 		musb_pullup(musb, is_on);
 	}
 	spin_unlock_irqrestore(&musb->lock, flags);
+
+	pm_runtime_put(musb->controller);
+
 	return 0;
 }
 

drivers/usb/musb/tusb6010_omap.c

@@ -89,7 +89,7 @@ static inline int tusb_omap_use_shared_dmareq(struct tusb_omap_dma_ch *chdat)
 	u32		reg = musb_readl(chdat->tbase, TUSB_DMA_EP_MAP);
 
 	if (reg != 0) {
-		dev_dbg(musb->controller, "ep%i dmareq0 is busy for ep%i\n",
+		dev_dbg(chdat->musb->controller, "ep%i dmareq0 is busy for ep%i\n",
 			chdat->epnum, reg & 0xf);
 		return -EAGAIN;
 	}