ARM: imx/debug-macro: rework using the new io mapping macro

This gets rid of the last user of IMX_NEEDS_DEPRECATED_SYMBOLS.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

arch/arm/plat-mxc/include/mach/debug-macro.S

@@ -10,58 +10,49 @@
  * published by the Free Software Foundation.
  *
  */
-#define IMX_NEEDS_DEPRECATED_SYMBOLS
+#include <mach/hardware.h>
 
 #ifdef CONFIG_ARCH_MX1
-#include <mach/mx1.h>
-#define UART_PADDR	UART1_BASE_ADDR
-#define UART_VADDR	IO_ADDRESS(UART1_BASE_ADDR)
+#define UART_PADDR	MX1_UART1_BASE_ADDR
 #endif
 
 #ifdef CONFIG_ARCH_MX25
 #ifdef UART_PADDR
 #error "CONFIG_DEBUG_LL is incompatible with multiple archs"
 #endif
-#include <mach/mx25.h>
 #define UART_PADDR	MX25_UART1_BASE_ADDR
-#define UART_VADDR	MX25_AIPS1_IO_ADDRESS(MX25_UART1_BASE_ADDR)
 #endif
 
 #ifdef CONFIG_ARCH_MX2
 #ifdef UART_PADDR
 #error "CONFIG_DEBUG_LL is incompatible with multiple archs"
 #endif
-#include <mach/mx2x.h>
-#define UART_PADDR	UART1_BASE_ADDR
-#define UART_VADDR	AIPI_IO_ADDRESS(UART1_BASE_ADDR)
+#define UART_PADDR	MX2x_UART1_BASE_ADDR
 #endif
 
 #ifdef CONFIG_ARCH_MX3
 #ifdef UART_PADDR
 #error "CONFIG_DEBUG_LL is incompatible with multiple archs"
 #endif
-#include <mach/mx3x.h>
-#define UART_PADDR	UART1_BASE_ADDR
-#define UART_VADDR	AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
+#define UART_PADDR	MX3x_UART1_BASE_ADDR
 #endif
 
 #ifdef CONFIG_ARCH_MX5
 #ifdef UART_PADDR
 #error "CONFIG_DEBUG_LL is incompatible with multiple archs"
 #endif
-#include <mach/mx51.h>
 #define UART_PADDR	MX51_UART1_BASE_ADDR
-#define UART_VADDR	MX51_AIPS1_IO_ADDRESS(MX51_UART1_BASE_ADDR)
 #endif
 
 #ifdef CONFIG_ARCH_MXC91231
 #ifdef UART_PADDR
 #error "CONFIG_DEBUG_LL is incompatible with multiple archs"
 #endif
-#include <mach/mxc91231.h>
 #define UART_PADDR	MXC91231_UART2_BASE_ADDR
-#define UART_VADDR	MXC91231_IO_ADDRESS(MXC91231_UART2_BASE_ADDR)
 #endif
+
+#define UART_VADDR	IMX_IO_ADDRESS(UART_PADDR)
+
 		.macro	addruart, rp, rv
 		ldr	\rp, =UART_PADDR	@ physical
 		ldr	\rv, =UART_VADDR	@ virtual

arch/arm/plat-mxc/include/mach/mx25.h

@@ -2,7 +2,6 @@
 #define __MACH_MX25_H__
 
 #define MX25_AIPS1_BASE_ADDR		0x43f00000
-#define MX25_AIPS1_BASE_ADDR_VIRT	0xf5300000
 #define MX25_AIPS1_SIZE			SZ_1M
 #define MX25_AIPS2_BASE_ADDR		0x53f00000
 #define MX25_AIPS2_SIZE			SZ_1M
@@ -25,9 +24,6 @@
 #define MX25_GPIO2_BASE_ADDR		(MX25_AIPS2_BASE_ADDR + 0xd0000)
 #define MX25_WDOG_BASE_ADDR		(MX25_AIPS2_BASE_ADDR + 0xdc000)
 
-#define MX25_AIPS1_IO_ADDRESS(x) \
-	(((x) - MX25_AIPS1_BASE_ADDR) + MX25_AIPS1_BASE_ADDR_VIRT)
-
 #define MX25_UART1_BASE_ADDR		0x43f90000
 #define MX25_UART2_BASE_ADDR		0x43f94000
 #define MX25_AUDMUX_BASE_ADDR		0x43fb0000

arch/arm/plat-mxc/include/mach/mx2x.h

@@ -27,7 +27,6 @@
 
 /* Register offsets */
 #define MX2x_AIPI_BASE_ADDR		0x10000000
-#define MX2x_AIPI_BASE_ADDR_VIRT	0xf4400000
 #define MX2x_AIPI_SIZE			SZ_1M
 #define MX2x_DMA_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x01000)
 #define MX2x_WDOG_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x02000)
@@ -68,9 +67,6 @@
 #define MX2x_SAHB1_SIZE			SZ_1M
 #define MX2x_CSI_BASE_ADDR			(MX2x_SAHB1_BASE_ADDR + 0x0000)
 
-#define AIPI_IO_ADDRESS(x)	\
-	(((x) - AIPI_BASE_ADDR) + AIPI_BASE_ADDR_VIRT)
-
 /* fixed interrupt numbers */
 #define MX2x_INT_CSPI3		6
 #define MX2x_INT_GPIO		8
@@ -148,7 +144,6 @@
 #ifdef IMX_NEEDS_DEPRECATED_SYMBOLS
 /* these should go away */
 #define AIPI_BASE_ADDR MX2x_AIPI_BASE_ADDR
-#define AIPI_BASE_ADDR_VIRT MX2x_AIPI_BASE_ADDR_VIRT
 #define AIPI_SIZE MX2x_AIPI_SIZE
 #define DMA_BASE_ADDR MX2x_DMA_BASE_ADDR
 #define WDOG_BASE_ADDR MX2x_WDOG_BASE_ADDR

arch/arm/plat-mxc/include/mach/mx3x.h

@@ -44,7 +44,6 @@
  * AIPS 1
  */
 #define MX3x_AIPS1_BASE_ADDR		0x43f00000
-#define MX3x_AIPS1_BASE_ADDR_VIRT	0xf5300000
 #define MX3x_AIPS1_SIZE			SZ_1M
 #define MX3x_MAX_BASE_ADDR			(MX3x_AIPS1_BASE_ADDR + 0x04000)
 #define MX3x_EVTMON_BASE_ADDR			(MX3x_AIPS1_BASE_ADDR + 0x08000)
@@ -141,9 +140,6 @@
 
 #define MX3x_PCMCIA_MEM_BASE_ADDR	0xbc000000
 
-#define AIPS1_IO_ADDRESS(x)  \
-	(((x) - AIPS1_BASE_ADDR) + AIPS1_BASE_ADDR_VIRT)
-
 /*
  * Interrupt numbers
  */
@@ -230,7 +226,6 @@ static inline int mx35_revision(void)
 #define L2CC_BASE_ADDR MX3x_L2CC_BASE_ADDR
 #define L2CC_SIZE MX3x_L2CC_SIZE
 #define AIPS1_BASE_ADDR MX3x_AIPS1_BASE_ADDR
-#define AIPS1_BASE_ADDR_VIRT MX3x_AIPS1_BASE_ADDR_VIRT
 #define AIPS1_SIZE MX3x_AIPS1_SIZE
 #define MAX_BASE_ADDR MX3x_MAX_BASE_ADDR
 #define EVTMON_BASE_ADDR MX3x_EVTMON_BASE_ADDR

arch/arm/plat-mxc/include/mach/mx51.h

@@ -53,7 +53,6 @@
  * AIPS 1
  */
 #define MX51_AIPS1_BASE_ADDR		0x73f00000
-#define MX51_AIPS1_BASE_ADDR_VIRT	0xf5700000
 #define MX51_AIPS1_SIZE			SZ_1M
 
 #define MX51_OTG_BASE_ADDR		(MX51_AIPS1_BASE_ADDR + 0x80000)
@@ -137,10 +136,6 @@
 #define MX51_IO_P2V(x)			IMX_IO_P2V(x)
 #define MX51_IO_ADDRESS(x)		IOMEM(MX51_IO_P2V(x))
 
-/* This is currently used in <mach/debug-macro.S>, but should go away */
-#define MX51_AIPS1_IO_ADDRESS(x)  \
-	(((x) - MX51_AIPS1_BASE_ADDR) + MX51_AIPS1_BASE_ADDR_VIRT)
-
 /*
  * defines for SPBA modules
  */