Merge branch 'next/devel-samsung' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/soc

Misc SoC-related fixes/cleanups for Samsung platforms

* 'next/devel-samsung' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: SAMSUNG: Add check for NULL in clock interface
  ARM: EXYNOS: Put PCM, Slimbus, Spdif clocks to off state
  ARM: EXYNOS: Add bus clock for FIMD
  ARM: SAMSUNG: Fix HDMI related warnings
  ARM: S3C24XX: Add .get_rate callback for "camif-upll" clock
  ARM: EXYNOS: Fix incorrect help text
  ARM: EXYNOS: Turn off clocks for NAND, OneNAND and TSI controllers
  + sync to 3.6-rc6

Documentation/i2c/busses/i2c-i801

@@ -21,6 +21,7 @@ Supported adapters:
   * Intel DH89xxCC (PCH)
   * Intel Panther Point (PCH)
   * Intel Lynx Point (PCH)
+  * Intel Lynx Point-LP (PCH)
    Datasheets: Publicly available at the Intel website
 
 On Intel Patsburg and later chipsets, both the normal host SMBus controller

MAINTAINERS

@@ -3397,7 +3397,7 @@ M:	"Wolfram Sang (embedded platforms)" <w.sang@pengutronix.de>
 L:	linux-i2c@vger.kernel.org
 W:	http://i2c.wiki.kernel.org/
 T:	quilt kernel.org/pub/linux/kernel/people/jdelvare/linux-2.6/jdelvare-i2c/
-T:	git git://git.fluff.org/bjdooks/linux.git
+T:	git git://git.pengutronix.de/git/wsa/linux.git
 S:	Maintained
 F:	Documentation/i2c/
 F:	drivers/i2c/

Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 6
 SUBLEVEL = 0
-EXTRAVERSION = -rc5
+EXTRAVERSION = -rc6
 NAME = Saber-toothed Squirrel
 
 # *DOCUMENTATION*

arch/arm/Kconfig.debug

@@ -356,15 +356,15 @@ choice
 		  is nothing connected to read from the DCC.
 
 	config DEBUG_SEMIHOSTING
-		bool "Kernel low-level debug output via semihosting I"
+		bool "Kernel low-level debug output via semihosting I/O"
 		help
 		  Semihosting enables code running on an ARM target to use
 		  the I/O facilities on a host debugger/emulator through a
-		  simple SVC calls. The host debugger or emulator must have
+		  simple SVC call. The host debugger or emulator must have
 		  semihosting enabled for the special svc call to be trapped
 		  otherwise the kernel will crash.
 
-		  This is known to work with OpenOCD, as wellas
+		  This is known to work with OpenOCD, as well as
 		  ARM's Fast Models, or any other controlling environment
 		  that implements semihosting.
 

arch/arm/Makefile

@@ -285,10 +285,10 @@ zImage Image xipImage bootpImage uImage: vmlinux
 zinstall uinstall install: vmlinux
 	$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $@
 
-%.dtb:
+%.dtb: scripts
 	$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@
 
-dtbs:
+dtbs: scripts
 	$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@
 
 # We use MRPROPER_FILES and CLEAN_FILES now

arch/arm/boot/compressed/head.S

@@ -659,10 +659,14 @@ __armv7_mmu_cache_on:
 #ifdef CONFIG_CPU_ENDIAN_BE8
 		orr	r0, r0, #1 << 25	@ big-endian page tables
 #endif
+		mrcne   p15, 0, r6, c2, c0, 2   @ read ttb control reg
 		orrne	r0, r0, #1		@ MMU enabled
 		movne	r1, #0xfffffffd		@ domain 0 = client
+		bic     r6, r6, #1 << 31        @ 32-bit translation system
+		bic     r6, r6, #3 << 0         @ use only ttbr0
 		mcrne	p15, 0, r3, c2, c0, 0	@ load page table pointer
 		mcrne	p15, 0, r1, c3, c0, 0	@ load domain access control
+		mcrne   p15, 0, r6, c2, c0, 2   @ load ttb control
 #endif
 		mcr	p15, 0, r0, c7, c5, 4	@ ISB
 		mcr	p15, 0, r0, c1, c0, 0	@ load control register

arch/arm/include/asm/assembler.h

@@ -320,4 +320,12 @@
 	.size \name , . - \name
 	.endm
 
+	.macro check_uaccess, addr:req, size:req, limit:req, tmp:req, bad:req
+#ifndef CONFIG_CPU_USE_DOMAINS
+	adds	\tmp, \addr, #\size - 1
+	sbcccs	\tmp, \tmp, \limit
+	bcs	\bad
+#endif
+	.endm
+
 #endif /* __ASM_ASSEMBLER_H__ */

arch/arm/include/asm/memory.h

@@ -187,6 +187,7 @@ static inline unsigned long __phys_to_virt(unsigned long x)
 #define __phys_to_virt(x)	((x) - PHYS_OFFSET + PAGE_OFFSET)
 #endif
 #endif
+#endif /* __ASSEMBLY__ */
 
 #ifndef PHYS_OFFSET
 #ifdef PLAT_PHYS_OFFSET
@@ -196,6 +197,8 @@ static inline unsigned long __phys_to_virt(unsigned long x)
 #endif
 #endif
 
+#ifndef __ASSEMBLY__
+
 /*
  * PFNs are used to describe any physical page; this means
  * PFN 0 == physical address 0.

arch/arm/include/asm/tlb.h

@@ -199,6 +199,9 @@ static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte,
 {
 	pgtable_page_dtor(pte);
 
+#ifdef CONFIG_ARM_LPAE
+	tlb_add_flush(tlb, addr);
+#else
 	/*
 	 * With the classic ARM MMU, a pte page has two corresponding pmd
 	 * entries, each covering 1MB.
@@ -206,6 +209,7 @@ static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte,
 	addr &= PMD_MASK;
 	tlb_add_flush(tlb, addr + SZ_1M - PAGE_SIZE);
 	tlb_add_flush(tlb, addr + SZ_1M);
+#endif
 
 	tlb_remove_page(tlb, pte);
 }

arch/arm/include/asm/uaccess.h

@@ -101,28 +101,39 @@ extern int __get_user_1(void *);
 extern int __get_user_2(void *);
 extern int __get_user_4(void *);
 
-#define __get_user_x(__r2,__p,__e,__s,__i...)				\
+#define __GUP_CLOBBER_1	"lr", "cc"
+#ifdef CONFIG_CPU_USE_DOMAINS
+#define __GUP_CLOBBER_2	"ip", "lr", "cc"
+#else
+#define __GUP_CLOBBER_2 "lr", "cc"
+#endif
+#define __GUP_CLOBBER_4	"lr", "cc"
+
+#define __get_user_x(__r2,__p,__e,__l,__s)				\
 	   __asm__ __volatile__ (					\
 		__asmeq("%0", "r0") __asmeq("%1", "r2")			\
+		__asmeq("%3", "r1")					\
 		"bl	__get_user_" #__s				\
 		: "=&r" (__e), "=r" (__r2)				\
-		: "0" (__p)						\
-		: __i, "cc")
+		: "0" (__p), "r" (__l)					\
+		: __GUP_CLOBBER_##__s)
 
-#define get_user(x,p)							\
+#define __get_user_check(x,p)							\
 	({								\
+		unsigned long __limit = current_thread_info()->addr_limit - 1; \
 		register const typeof(*(p)) __user *__p asm("r0") = (p);\
 		register unsigned long __r2 asm("r2");			\
+		register unsigned long __l asm("r1") = __limit;		\
 		register int __e asm("r0");				\
 		switch (sizeof(*(__p))) {				\
 		case 1:							\
-			__get_user_x(__r2, __p, __e, 1, "lr");		\
-	       		break;						\
+			__get_user_x(__r2, __p, __e, __l, 1);		\
+			break;						\
 		case 2:							\
-			__get_user_x(__r2, __p, __e, 2, "r3", "lr");	\
+			__get_user_x(__r2, __p, __e, __l, 2);		\
 			break;						\
 		case 4:							\
-	       		__get_user_x(__r2, __p, __e, 4, "lr");		\
+			__get_user_x(__r2, __p, __e, __l, 4);		\
 			break;						\
 		default: __e = __get_user_bad(); break;			\
 		}							\
@@ -130,42 +141,57 @@ extern int __get_user_4(void *);
 		__e;							\
 	})
 
+#define get_user(x,p)							\
+	({								\
+		might_fault();						\
+		__get_user_check(x,p);					\
+	 })
+
 extern int __put_user_1(void *, unsigned int);
 extern int __put_user_2(void *, unsigned int);
 extern int __put_user_4(void *, unsigned int);
 extern int __put_user_8(void *, unsigned long long);
 
-#define __put_user_x(__r2,__p,__e,__s)					\
+#define __put_user_x(__r2,__p,__e,__l,__s)				\
 	   __asm__ __volatile__ (					\
 		__asmeq("%0", "r0") __asmeq("%2", "r2")			\
+		__asmeq("%3", "r1")					\
 		"bl	__put_user_" #__s				\
 		: "=&r" (__e)						\
-		: "0" (__p), "r" (__r2)					\
+		: "0" (__p), "r" (__r2), "r" (__l)			\
 		: "ip", "lr", "cc")
 
-#define put_user(x,p)							\
+#define __put_user_check(x,p)							\
 	({								\
+		unsigned long __limit = current_thread_info()->addr_limit - 1; \
 		register const typeof(*(p)) __r2 asm("r2") = (x);	\
 		register const typeof(*(p)) __user *__p asm("r0") = (p);\
+		register unsigned long __l asm("r1") = __limit;		\
 		register int __e asm("r0");				\
 		switch (sizeof(*(__p))) {				\
 		case 1:							\
-			__put_user_x(__r2, __p, __e, 1);		\
+			__put_user_x(__r2, __p, __e, __l, 1);		\
 			break;						\
 		case 2:							\
-			__put_user_x(__r2, __p, __e, 2);		\
+			__put_user_x(__r2, __p, __e, __l, 2);		\
 			break;						\
 		case 4:							\
-			__put_user_x(__r2, __p, __e, 4);		\
+			__put_user_x(__r2, __p, __e, __l, 4);		\
 			break;						\
 		case 8:							\
-			__put_user_x(__r2, __p, __e, 8);		\
+			__put_user_x(__r2, __p, __e, __l, 8);		\
 			break;						\
 		default: __e = __put_user_bad(); break;			\
 		}							\
 		__e;							\
 	})
 
+#define put_user(x,p)							\
+	({								\
+		might_fault();						\
+		__put_user_check(x,p);					\
+	 })
+
 #else /* CONFIG_MMU */
 
 /*
@@ -219,6 +245,7 @@ do {									\
 	unsigned long __gu_addr = (unsigned long)(ptr);			\
 	unsigned long __gu_val;						\
 	__chk_user_ptr(ptr);						\
+	might_fault();							\
 	switch (sizeof(*(ptr))) {					\
 	case 1:	__get_user_asm_byte(__gu_val,__gu_addr,err);	break;	\
 	case 2:	__get_user_asm_half(__gu_val,__gu_addr,err);	break;	\
@@ -300,6 +327,7 @@ do {									\
 	unsigned long __pu_addr = (unsigned long)(ptr);			\
 	__typeof__(*(ptr)) __pu_val = (x);				\
 	__chk_user_ptr(ptr);						\
+	might_fault();							\
 	switch (sizeof(*(ptr))) {					\
 	case 1: __put_user_asm_byte(__pu_val,__pu_addr,err);	break;	\
 	case 2: __put_user_asm_half(__pu_val,__pu_addr,err);	break;	\

arch/arm/kernel/hw_breakpoint.c

@@ -159,6 +159,12 @@ static int debug_arch_supported(void)
 		arch >= ARM_DEBUG_ARCH_V7_1;
 }
 
+/* Can we determine the watchpoint access type from the fsr? */
+static int debug_exception_updates_fsr(void)
+{
+	return 0;
+}
+
 /* Determine number of WRP registers available. */
 static int get_num_wrp_resources(void)
 {
@@ -604,13 +610,14 @@ int arch_validate_hwbkpt_settings(struct perf_event *bp)
 		/* Aligned */
 		break;
 	case 1:
-		/* Allow single byte watchpoint. */
-		if (info->ctrl.len == ARM_BREAKPOINT_LEN_1)
-			break;
 	case 2:
 		/* Allow halfword watchpoints and breakpoints. */
 		if (info->ctrl.len == ARM_BREAKPOINT_LEN_2)
 			break;
+	case 3:
+		/* Allow single byte watchpoint. */
+		if (info->ctrl.len == ARM_BREAKPOINT_LEN_1)
+			break;
 	default:
 		ret = -EINVAL;
 		goto out;
@@ -619,18 +626,35 @@ int arch_validate_hwbkpt_settings(struct perf_event *bp)
 	info->address &= ~alignment_mask;
 	info->ctrl.len <<= offset;
 
-	/*
-	 * Currently we rely on an overflow handler to take
-	 * care of single-stepping the breakpoint when it fires.
-	 * In the case of userspace breakpoints on a core with V7 debug,
-	 * we can use the mismatch feature as a poor-man's hardware
-	 * single-step, but this only works for per-task breakpoints.
-	 */
-	if (!bp->overflow_handler && (arch_check_bp_in_kernelspace(bp) ||
-	    !core_has_mismatch_brps() || !bp->hw.bp_target)) {
-		pr_warning("overflow handler required but none found\n");
-		ret = -EINVAL;
+	if (!bp->overflow_handler) {
+		/*
+		 * Mismatch breakpoints are required for single-stepping
+		 * breakpoints.
+		 */
+		if (!core_has_mismatch_brps())
+			return -EINVAL;
+
+		/* We don't allow mismatch breakpoints in kernel space. */
+		if (arch_check_bp_in_kernelspace(bp))
+			return -EPERM;
+
+		/*
+		 * Per-cpu breakpoints are not supported by our stepping
+		 * mechanism.
+		 */
+		if (!bp->hw.bp_target)
+			return -EINVAL;
+
+		/*
+		 * We only support specific access types if the fsr
+		 * reports them.
+		 */
+		if (!debug_exception_updates_fsr() &&
+		    (info->ctrl.type == ARM_BREAKPOINT_LOAD ||
+		     info->ctrl.type == ARM_BREAKPOINT_STORE))
+			return -EINVAL;
 	}
+
 out:
 	return ret;
 }
@@ -706,10 +730,12 @@ static void watchpoint_handler(unsigned long addr, unsigned int fsr,
 				goto unlock;
 
 			/* Check that the access type matches. */
-			access = (fsr & ARM_FSR_ACCESS_MASK) ? HW_BREAKPOINT_W :
-				 HW_BREAKPOINT_R;
-			if (!(access & hw_breakpoint_type(wp)))
-				goto unlock;
+			if (debug_exception_updates_fsr()) {
+				access = (fsr & ARM_FSR_ACCESS_MASK) ?
+					  HW_BREAKPOINT_W : HW_BREAKPOINT_R;
+				if (!(access & hw_breakpoint_type(wp)))
+					goto unlock;
+			}
 
 			/* We have a winner. */
 			info->trigger = addr;

arch/arm/kernel/traps.c

@@ -420,20 +420,23 @@ asmlinkage void __exception do_undefinstr(struct pt_regs *regs)
 #endif
 			instr = *(u32 *) pc;
 	} else if (thumb_mode(regs)) {
-		get_user(instr, (u16 __user *)pc);
+		if (get_user(instr, (u16 __user *)pc))
+			goto die_sig;
 		if (is_wide_instruction(instr)) {
 			unsigned int instr2;
-			get_user(instr2, (u16 __user *)pc+1);
+			if (get_user(instr2, (u16 __user *)pc+1))
+				goto die_sig;
 			instr <<= 16;
 			instr |= instr2;
 		}
-	} else {
-		get_user(instr, (u32 __user *)pc);
+	} else if (get_user(instr, (u32 __user *)pc)) {
+		goto die_sig;
 	}
 
 	if (call_undef_hook(regs, instr) == 0)
 		return;
 
+die_sig:
 #ifdef CONFIG_DEBUG_USER
 	if (user_debug & UDBG_UNDEFINED) {
 		printk(KERN_INFO "%s (%d): undefined instruction: pc=%p\n",

arch/arm/lib/delay.c

@@ -59,6 +59,7 @@ void __init init_current_timer_delay(unsigned long freq)
 {
 	pr_info("Switching to timer-based delay loop\n");
 	lpj_fine			= freq / HZ;
+	loops_per_jiffy			= lpj_fine;
 	arm_delay_ops.delay		= __timer_delay;
 	arm_delay_ops.const_udelay	= __timer_const_udelay;
 	arm_delay_ops.udelay		= __timer_udelay;

arch/arm/lib/getuser.S

@@ -16,8 +16,9 @@
  * __get_user_X
  *
  * Inputs:	r0 contains the address
+ *		r1 contains the address limit, which must be preserved
  * Outputs:	r0 is the error code
- *		r2, r3 contains the zero-extended value
+ *		r2 contains the zero-extended value
  *		lr corrupted
  *
  * No other registers must be altered.  (see <asm/uaccess.h>
@@ -27,33 +28,39 @@
  * Note also that it is intended that __get_user_bad is not global.
  */
 #include <linux/linkage.h>
+#include <asm/assembler.h>
 #include <asm/errno.h>
 #include <asm/domain.h>
 
 ENTRY(__get_user_1)
+	check_uaccess r0, 1, r1, r2, __get_user_bad
 1: TUSER(ldrb)	r2, [r0]
 	mov	r0, #0
 	mov	pc, lr
 ENDPROC(__get_user_1)
 
 ENTRY(__get_user_2)
-#ifdef CONFIG_THUMB2_KERNEL
-2: TUSER(ldrb)	r2, [r0]
-3: TUSER(ldrb)	r3, [r0, #1]
+	check_uaccess r0, 2, r1, r2, __get_user_bad
+#ifdef CONFIG_CPU_USE_DOMAINS
+rb	.req	ip
+2:	ldrbt	r2, [r0], #1
+3:	ldrbt	rb, [r0], #0
 #else
-2: TUSER(ldrb)	r2, [r0], #1
-3: TUSER(ldrb)	r3, [r0]
+rb	.req	r0
+2:	ldrb	r2, [r0]
+3:	ldrb	rb, [r0, #1]
 #endif
 #ifndef __ARMEB__
-	orr	r2, r2, r3, lsl #8
+	orr	r2, r2, rb, lsl #8
 #else
-	orr	r2, r3, r2, lsl #8
+	orr	r2, rb, r2, lsl #8
 #endif
 	mov	r0, #0
 	mov	pc, lr
 ENDPROC(__get_user_2)
 
 ENTRY(__get_user_4)
+	check_uaccess r0, 4, r1, r2, __get_user_bad
 4: TUSER(ldr)	r2, [r0]
 	mov	r0, #0
 	mov	pc, lr

arch/arm/lib/putuser.S

@@ -16,6 +16,7 @@
  * __put_user_X
  *
  * Inputs:	r0 contains the address
+ *		r1 contains the address limit, which must be preserved
  *		r2, r3 contains the value
  * Outputs:	r0 is the error code
  *		lr corrupted
@@ -27,16 +28,19 @@
  * Note also that it is intended that __put_user_bad is not global.
  */
 #include <linux/linkage.h>
+#include <asm/assembler.h>
 #include <asm/errno.h>
 #include <asm/domain.h>
 
 ENTRY(__put_user_1)
+	check_uaccess r0, 1, r1, ip, __put_user_bad
 1: TUSER(strb)	r2, [r0]
 	mov	r0, #0
 	mov	pc, lr
 ENDPROC(__put_user_1)
 
 ENTRY(__put_user_2)
+	check_uaccess r0, 2, r1, ip, __put_user_bad
 	mov	ip, r2, lsr #8
 #ifdef CONFIG_THUMB2_KERNEL
 #ifndef __ARMEB__
@@ -60,12 +64,14 @@ ENTRY(__put_user_2)
 ENDPROC(__put_user_2)
 
 ENTRY(__put_user_4)
+	check_uaccess r0, 4, r1, ip, __put_user_bad
 4: TUSER(str)	r2, [r0]
 	mov	r0, #0
 	mov	pc, lr
 ENDPROC(__put_user_4)
 
 ENTRY(__put_user_8)
+	check_uaccess r0, 8, r1, ip, __put_user_bad
 #ifdef CONFIG_THUMB2_KERNEL
 5: TUSER(str)	r2, [r0]
 6: TUSER(str)	r3, [r0, #4]

arch/arm/mach-exynos/Kconfig

@@ -418,8 +418,8 @@ config MACH_EXYNOS5_DT
 	select USE_OF
 	select ARM_AMBA
 	help
-	  Machine support for Samsung Exynos4 machine with device tree enabled.
-	  Select this if a fdt blob is available for the EXYNOS4 SoC based board.
+	  Machine support for Samsung EXYNOS5 machine with device tree enabled.
+	  Select this if a fdt blob is available for the EXYNOS5 SoC based board.
 
 if ARCH_EXYNOS4
 

arch/arm/mach-exynos/clock-exynos4.c

@@ -500,6 +500,10 @@ static struct clk exynos4_init_clocks_off[] = {
 		.devname	= "exynos4-fimc.3",
 		.enable		= exynos4_clk_ip_cam_ctrl,
 		.ctrlbit	= (1 << 3),
+	}, {
+		.name		= "tsi",
+		.enable		= exynos4_clk_ip_fsys_ctrl,
+		.ctrlbit	= (1 << 4),
 	}, {
 		.name		= "hsmmc",
 		.devname	= "exynos4-sdhci.0",
@@ -529,6 +533,14 @@ static struct clk exynos4_init_clocks_off[] = {
 		.parent		= &exynos4_clk_aclk_133.clk,
 		.enable		= exynos4_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 9),
+	}, {
+		.name		= "onenand",
+		.enable		= exynos4_clk_ip_fsys_ctrl,
+		.ctrlbit	= (1 << 15),
+	}, {
+		.name		= "nfcon",
+		.enable		= exynos4_clk_ip_fsys_ctrl,
+		.ctrlbit	= (1 << 16),
 	}, {
 		.name		= "dac",
 		.devname	= "s5p-sdo",
@@ -614,6 +626,25 @@ static struct clk exynos4_init_clocks_off[] = {
 		.devname	= "samsung-i2s.2",
 		.enable		= exynos4_clk_ip_peril_ctrl,
 		.ctrlbit	= (1 << 21),
+	}, {
+		.name		= "pcm",
+		.devname	= "samsung-pcm.1",
+		.enable		= exynos4_clk_ip_peril_ctrl,
+		.ctrlbit	= (1 << 22),
+	}, {
+		.name		= "pcm",
+		.devname	= "samsung-pcm.2",
+		.enable		= exynos4_clk_ip_peril_ctrl,
+		.ctrlbit	= (1 << 23),
+	}, {
+		.name		= "slimbus",
+		.enable		= exynos4_clk_ip_peril_ctrl,
+		.ctrlbit	= (1 << 25),
+	}, {
+		.name		= "spdif",
+		.devname	= "samsung-spdif",
+		.enable		= exynos4_clk_ip_peril_ctrl,
+		.ctrlbit	= (1 << 26),
 	}, {
 		.name		= "ac97",
 		.devname	= "samsung-ac97",

arch/arm/mach-exynos/clock-exynos5.c

@@ -891,6 +891,13 @@ static struct clk exynos5_clk_mdma1 = {
 	.ctrlbit	= (1 << 4),
 };
 
+static struct clk exynos5_clk_fimd1 = {
+	.name		= "fimd",
+	.devname	= "exynos5-fb.1",
+	.enable		= exynos5_clk_ip_disp1_ctrl,
+	.ctrlbit	= (1 << 0),
+};
+
 struct clk *exynos5_clkset_group_list[] = {
 	[0] = &clk_ext_xtal_mux,
 	[1] = NULL,
@@ -1120,6 +1127,18 @@ static struct clksrc_clk exynos5_clk_sclk_spi2 = {
 	.reg_div = { .reg = EXYNOS5_CLKDIV_PERIC2, .shift = 8, .size = 8 },
 };
 
+struct clksrc_clk exynos5_clk_sclk_fimd1 = {
+	.clk	= {
+		.name		= "sclk_fimd",
+		.devname	= "exynos5-fb.1",
+		.enable		= exynos5_clksrc_mask_disp1_0_ctrl,
+		.ctrlbit	= (1 << 0),
+	},
+	.sources = &exynos5_clkset_group,
+	.reg_src = { .reg = EXYNOS5_CLKSRC_DISP1_0, .shift = 0, .size = 4 },
+	.reg_div = { .reg = EXYNOS5_CLKDIV_DISP1_0, .shift = 0, .size = 4 },
+};
+
 static struct clksrc_clk exynos5_clksrcs[] = {
 	{
 		.clk	= {
@@ -1129,16 +1148,6 @@ static struct clksrc_clk exynos5_clksrcs[] = {
 			.ctrlbit	= (1 << 16),
 		},
 		.reg_div = { .reg = EXYNOS5_CLKDIV_FSYS3, .shift = 8, .size = 8 },
-	}, {
-		.clk	= {
-			.name		= "sclk_fimd",
-			.devname	= "s3cfb.1",
-			.enable		= exynos5_clksrc_mask_disp1_0_ctrl,
-			.ctrlbit	= (1 << 0),
-		},
-		.sources = &exynos5_clkset_group,
-		.reg_src = { .reg = EXYNOS5_CLKSRC_DISP1_0, .shift = 0, .size = 4 },
-		.reg_div = { .reg = EXYNOS5_CLKDIV_DISP1_0, .shift = 0, .size = 4 },
 	}, {
 		.clk	= {
 			.name		= "aclk_266_gscl",
@@ -1240,12 +1249,14 @@ static struct clksrc_clk *exynos5_sysclks[] = {
 	&exynos5_clk_mdout_spi0,
 	&exynos5_clk_mdout_spi1,
 	&exynos5_clk_mdout_spi2,
+	&exynos5_clk_sclk_fimd1,
 };
 
 static struct clk *exynos5_clk_cdev[] = {
 	&exynos5_clk_pdma0,
 	&exynos5_clk_pdma1,
 	&exynos5_clk_mdma1,
+	&exynos5_clk_fimd1,
 };
 
 static struct clksrc_clk *exynos5_clksrc_cdev[] = {
@@ -1274,6 +1285,7 @@ static struct clk_lookup exynos5_clk_lookup[] = {
 	CLKDEV_INIT("dma-pl330.0", "apb_pclk", &exynos5_clk_pdma0),
 	CLKDEV_INIT("dma-pl330.1", "apb_pclk", &exynos5_clk_pdma1),
 	CLKDEV_INIT("dma-pl330.2", "apb_pclk", &exynos5_clk_mdma1),
+	CLKDEV_INIT("exynos5-fb.1", "lcd", &exynos5_clk_fimd1),
 };
 
 static unsigned long exynos5_epll_get_rate(struct clk *clk)

arch/arm/mach-imx/clk-imx25.c

@@ -222,10 +222,8 @@ int __init mx25_clocks_init(void)
 	clk_register_clkdev(clk[lcdc_ipg], "ipg", "imx-fb.0");
 	clk_register_clkdev(clk[lcdc_ahb], "ahb", "imx-fb.0");
 	clk_register_clkdev(clk[wdt_ipg], NULL, "imx2-wdt.0");
-	clk_register_clkdev(clk[ssi1_ipg_per], "per", "imx-ssi.0");
-	clk_register_clkdev(clk[ssi1_ipg], "ipg", "imx-ssi.0");
-	clk_register_clkdev(clk[ssi2_ipg_per], "per", "imx-ssi.1");
-	clk_register_clkdev(clk[ssi2_ipg], "ipg", "imx-ssi.1");
+	clk_register_clkdev(clk[ssi1_ipg], NULL, "imx-ssi.0");
+	clk_register_clkdev(clk[ssi2_ipg], NULL, "imx-ssi.1");
 	clk_register_clkdev(clk[esdhc1_ipg_per], "per", "sdhci-esdhc-imx25.0");
 	clk_register_clkdev(clk[esdhc1_ipg], "ipg", "sdhci-esdhc-imx25.0");
 	clk_register_clkdev(clk[esdhc1_ahb], "ahb", "sdhci-esdhc-imx25.0");

arch/arm/mach-imx/clk-imx35.c

@@ -234,10 +234,8 @@ int __init mx35_clocks_init()
 	clk_register_clkdev(clk[kpp_gate], NULL, "imx-keypad");
 	clk_register_clkdev(clk[owire_gate], NULL, "mxc_w1");
 	clk_register_clkdev(clk[sdma_gate], NULL, "imx35-sdma");
-	clk_register_clkdev(clk[ipg], "ipg", "imx-ssi.0");
-	clk_register_clkdev(clk[ssi1_div_post], "per", "imx-ssi.0");
-	clk_register_clkdev(clk[ipg], "ipg", "imx-ssi.1");
-	clk_register_clkdev(clk[ssi2_div_post], "per", "imx-ssi.1");
+	clk_register_clkdev(clk[ssi1_gate], NULL, "imx-ssi.0");
+	clk_register_clkdev(clk[ssi2_gate], NULL, "imx-ssi.1");
 	/* i.mx35 has the i.mx21 type uart */
 	clk_register_clkdev(clk[uart1_gate], "per", "imx21-uart.0");
 	clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.0");

arch/arm/mach-omap2/Kconfig

@@ -232,10 +232,11 @@ config MACH_OMAP3_PANDORA
 	select OMAP_PACKAGE_CBB
 	select REGULATOR_FIXED_VOLTAGE if REGULATOR
 
-config MACH_OMAP3_TOUCHBOOK
+config MACH_TOUCHBOOK
 	bool "OMAP3 Touch Book"
 	depends on ARCH_OMAP3
 	default y
+	select OMAP_PACKAGE_CBB
 
 config MACH_OMAP_3430SDP
 	bool "OMAP 3430 SDP board"

arch/arm/mach-omap2/Makefile

@@ -256,7 +256,7 @@ obj-$(CONFIG_MACH_OMAP_3630SDP)		+= board-zoom-display.o
 obj-$(CONFIG_MACH_CM_T35)		+= board-cm-t35.o
 obj-$(CONFIG_MACH_CM_T3517)		+= board-cm-t3517.o
 obj-$(CONFIG_MACH_IGEP0020)		+= board-igep0020.o
-obj-$(CONFIG_MACH_OMAP3_TOUCHBOOK)	+= board-omap3touchbook.o
+obj-$(CONFIG_MACH_TOUCHBOOK)		+= board-omap3touchbook.o
 obj-$(CONFIG_MACH_OMAP_4430SDP)		+= board-4430sdp.o
 obj-$(CONFIG_MACH_OMAP4_PANDA)		+= board-omap4panda.o
 

arch/arm/mach-omap2/clock33xx_data.c

@@ -1038,13 +1038,13 @@ static struct omap_clk am33xx_clks[] = {
 	CLK(NULL,	"mmu_fck",		&mmu_fck,	CK_AM33XX),
 	CLK(NULL,	"smartreflex0_fck",	&smartreflex0_fck,	CK_AM33XX),
 	CLK(NULL,	"smartreflex1_fck",	&smartreflex1_fck,	CK_AM33XX),
-	CLK(NULL,	"gpt1_fck",		&timer1_fck,	CK_AM33XX),
-	CLK(NULL,	"gpt2_fck",		&timer2_fck,	CK_AM33XX),
-	CLK(NULL,	"gpt3_fck",		&timer3_fck,	CK_AM33XX),
-	CLK(NULL,	"gpt4_fck",		&timer4_fck,	CK_AM33XX),
-	CLK(NULL,	"gpt5_fck",		&timer5_fck,	CK_AM33XX),
-	CLK(NULL,	"gpt6_fck",		&timer6_fck,	CK_AM33XX),
-	CLK(NULL,	"gpt7_fck",		&timer7_fck,	CK_AM33XX),
+	CLK(NULL,	"timer1_fck",		&timer1_fck,	CK_AM33XX),
+	CLK(NULL,	"timer2_fck",		&timer2_fck,	CK_AM33XX),
+	CLK(NULL,	"timer3_fck",		&timer3_fck,	CK_AM33XX),
+	CLK(NULL,	"timer4_fck",		&timer4_fck,	CK_AM33XX),
+	CLK(NULL,	"timer5_fck",		&timer5_fck,	CK_AM33XX),
+	CLK(NULL,	"timer6_fck",		&timer6_fck,	CK_AM33XX),
+	CLK(NULL,	"timer7_fck",		&timer7_fck,	CK_AM33XX),
 	CLK(NULL,	"usbotg_fck",		&usbotg_fck,	CK_AM33XX),
 	CLK(NULL,	"ieee5000_fck",		&ieee5000_fck,	CK_AM33XX),
 	CLK(NULL,	"wdt1_fck",		&wdt1_fck,	CK_AM33XX),

arch/arm/mach-omap2/clockdomain2xxx_3xxx.c

@@ -241,6 +241,52 @@ static void omap3_clkdm_deny_idle(struct clockdomain *clkdm)
 		_clkdm_del_autodeps(clkdm);
 }
 
+static int omap3xxx_clkdm_clk_enable(struct clockdomain *clkdm)
+{
+	bool hwsup = false;
+
+	if (!clkdm->clktrctrl_mask)
+		return 0;
+
+	hwsup = omap2_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs,
+				clkdm->clktrctrl_mask);
+
+	if (hwsup) {
+		/* Disable HW transitions when we are changing deps */
+		_disable_hwsup(clkdm);
+		_clkdm_add_autodeps(clkdm);
+		_enable_hwsup(clkdm);
+	} else {
+		if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)
+			omap3_clkdm_wakeup(clkdm);
+	}
+
+	return 0;
+}
+
+static int omap3xxx_clkdm_clk_disable(struct clockdomain *clkdm)
+{
+	bool hwsup = false;
+
+	if (!clkdm->clktrctrl_mask)
+		return 0;
+
+	hwsup = omap2_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs,
+				clkdm->clktrctrl_mask);
+
+	if (hwsup) {
+		/* Disable HW transitions when we are changing deps */
+		_disable_hwsup(clkdm);
+		_clkdm_del_autodeps(clkdm);
+		_enable_hwsup(clkdm);
+	} else {
+		if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP)
+			omap3_clkdm_sleep(clkdm);
+	}
+
+	return 0;
+}
+
 struct clkdm_ops omap2_clkdm_operations = {
 	.clkdm_add_wkdep	= omap2_clkdm_add_wkdep,
 	.clkdm_del_wkdep	= omap2_clkdm_del_wkdep,
@@ -267,6 +313,6 @@ struct clkdm_ops omap3_clkdm_operations = {
 	.clkdm_wakeup		= omap3_clkdm_wakeup,
 	.clkdm_allow_idle	= omap3_clkdm_allow_idle,
 	.clkdm_deny_idle	= omap3_clkdm_deny_idle,
-	.clkdm_clk_enable	= omap2_clkdm_clk_enable,
-	.clkdm_clk_disable	= omap2_clkdm_clk_disable,
+	.clkdm_clk_enable	= omap3xxx_clkdm_clk_enable,
+	.clkdm_clk_disable	= omap3xxx_clkdm_clk_disable,
 };

arch/arm/mach-omap2/cm-regbits-34xx.h

@@ -67,6 +67,7 @@
 #define OMAP3430_EN_IVA2_DPLL_MASK			(0x7 << 0)
 
 /* CM_IDLEST_IVA2 */
+#define OMAP3430_ST_IVA2_SHIFT				0
 #define OMAP3430_ST_IVA2_MASK				(1 << 0)
 
 /* CM_IDLEST_PLL_IVA2 */

arch/arm/mach-omap2/omap-wakeupgen.c

@@ -47,7 +47,7 @@
 static void __iomem *wakeupgen_base;
 static void __iomem *sar_base;
 static DEFINE_SPINLOCK(wakeupgen_lock);
-static unsigned int irq_target_cpu[NR_IRQS];
+static unsigned int irq_target_cpu[MAX_IRQS];
 static unsigned int irq_banks = MAX_NR_REG_BANKS;
 static unsigned int max_irqs = MAX_IRQS;
 static unsigned int omap_secure_apis;

arch/arm/mach-omap2/omap_hwmod.c

@@ -1966,6 +1966,7 @@ static int _enable(struct omap_hwmod *oh)
 			_enable_sysc(oh);
 		}
 	} else {
+		_omap4_disable_module(oh);
 		_disable_clocks(oh);
 		pr_debug("omap_hwmod: %s: _wait_target_ready: %d\n",
 			 oh->name, r);

arch/arm/mach-omap2/omap_hwmod_3xxx_data.c

@@ -100,9 +100,9 @@ static struct omap_hwmod omap3xxx_mpu_hwmod = {
 
 /* IVA2 (IVA2) */
 static struct omap_hwmod_rst_info omap3xxx_iva_resets[] = {
-	{ .name = "logic", .rst_shift = 0 },
-	{ .name = "seq0", .rst_shift = 1 },
-	{ .name = "seq1", .rst_shift = 2 },
+	{ .name = "logic", .rst_shift = 0, .st_shift = 8 },
+	{ .name = "seq0", .rst_shift = 1, .st_shift = 9 },
+	{ .name = "seq1", .rst_shift = 2, .st_shift = 10 },
 };
 
 static struct omap_hwmod omap3xxx_iva_hwmod = {
@@ -112,6 +112,15 @@ static struct omap_hwmod omap3xxx_iva_hwmod = {
 	.rst_lines	= omap3xxx_iva_resets,
 	.rst_lines_cnt	= ARRAY_SIZE(omap3xxx_iva_resets),
 	.main_clk	= "iva2_ck",
+	.prcm = {
+		.omap2 = {
+			.module_offs = OMAP3430_IVA2_MOD,
+			.prcm_reg_id = 1,
+			.module_bit = OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_SHIFT,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP3430_ST_IVA2_SHIFT,
+		}
+	},
 };
 
 /* timer class */

arch/arm/mach-omap2/omap_hwmod_44xx_data.c

@@ -4209,7 +4209,7 @@ static struct omap_hwmod_ocp_if omap44xx_dsp__iva = {
 };
 
 /* dsp -> sl2if */
-static struct omap_hwmod_ocp_if omap44xx_dsp__sl2if = {
+static struct omap_hwmod_ocp_if __maybe_unused omap44xx_dsp__sl2if = {
 	.master		= &omap44xx_dsp_hwmod,
 	.slave		= &omap44xx_sl2if_hwmod,
 	.clk		= "dpll_iva_m5x2_ck",
@@ -4827,7 +4827,7 @@ static struct omap_hwmod_ocp_if omap44xx_l3_main_2__iss = {
 };
 
 /* iva -> sl2if */
-static struct omap_hwmod_ocp_if omap44xx_iva__sl2if = {
+static struct omap_hwmod_ocp_if __maybe_unused omap44xx_iva__sl2if = {
 	.master		= &omap44xx_iva_hwmod,
 	.slave		= &omap44xx_sl2if_hwmod,
 	.clk		= "dpll_iva_m5x2_ck",
@@ -5361,7 +5361,7 @@ static struct omap_hwmod_ocp_if omap44xx_l4_wkup__scrm = {
 };
 
 /* l3_main_2 -> sl2if */
-static struct omap_hwmod_ocp_if omap44xx_l3_main_2__sl2if = {
+static struct omap_hwmod_ocp_if __maybe_unused omap44xx_l3_main_2__sl2if = {
 	.master		= &omap44xx_l3_main_2_hwmod,
 	.slave		= &omap44xx_sl2if_hwmod,
 	.clk		= "l3_div_ck",
@@ -6031,7 +6031,7 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = {
 	&omap44xx_l4_abe__dmic,
 	&omap44xx_l4_abe__dmic_dma,
 	&omap44xx_dsp__iva,
-	&omap44xx_dsp__sl2if,
+	/* &omap44xx_dsp__sl2if, */
 	&omap44xx_l4_cfg__dsp,
 	&omap44xx_l3_main_2__dss,
 	&omap44xx_l4_per__dss,
@@ -6067,7 +6067,7 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = {
 	&omap44xx_l4_per__i2c4,
 	&omap44xx_l3_main_2__ipu,
 	&omap44xx_l3_main_2__iss,
-	&omap44xx_iva__sl2if,
+	/* &omap44xx_iva__sl2if, */
 	&omap44xx_l3_main_2__iva,
 	&omap44xx_l4_wkup__kbd,
 	&omap44xx_l4_cfg__mailbox,
@@ -6098,7 +6098,7 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = {
 	&omap44xx_l4_cfg__cm_core,
 	&omap44xx_l4_wkup__prm,
 	&omap44xx_l4_wkup__scrm,
-	&omap44xx_l3_main_2__sl2if,
+	/* &omap44xx_l3_main_2__sl2if, */
 	&omap44xx_l4_abe__slimbus1,
 	&omap44xx_l4_abe__slimbus1_dma,
 	&omap44xx_l4_per__slimbus2,

arch/arm/mach-omap2/timer.c

@@ -262,6 +262,7 @@ static u32 notrace dmtimer_read_sched_clock(void)
 	return 0;
 }
 
+#ifdef CONFIG_OMAP_32K_TIMER
 /* Setup free-running counter for clocksource */
 static int __init omap2_sync32k_clocksource_init(void)
 {
@@ -301,6 +302,12 @@ static int __init omap2_sync32k_clocksource_init(void)
 
 	return ret;
 }
+#else
+static inline int omap2_sync32k_clocksource_init(void)
+{
+	return -ENODEV;
+}
+#endif
 
 static void __init omap2_gptimer_clocksource_init(int gptimer_id,
 						const char *fck_source)

arch/arm/mach-s3c24xx/clock-s3c2440.c

@@ -87,6 +87,19 @@ static int s3c2440_camif_upll_setrate(struct clk *clk, unsigned long rate)
 	return 0;
 }
 
+static unsigned long s3c2440_camif_upll_getrate(struct clk *clk)
+{
+	unsigned long parent_rate = clk_get_rate(clk->parent);
+	unsigned long camdivn =  __raw_readl(S3C2440_CAMDIVN);
+
+	if (!(camdivn & S3C2440_CAMDIVN_CAMCLK_SEL))
+		return parent_rate;
+
+	camdivn &= S3C2440_CAMDIVN_CAMCLK_MASK;
+
+	return parent_rate / (camdivn + 1) / 2;
+}
+
 /* Extra S3C2440 clocks */
 
 static struct clk s3c2440_clk_cam = {
@@ -99,6 +112,7 @@ static struct clk s3c2440_clk_cam_upll = {
 	.name		= "camif-upll",
 	.ops		= &(struct clk_ops) {
 		.set_rate	= s3c2440_camif_upll_setrate,
+		.get_rate	= s3c2440_camif_upll_getrate,
 		.round_rate	= s3c2440_camif_upll_round,
 	},
 };

arch/arm/mm/context.c

@@ -63,10 +63,11 @@ static int contextidr_notifier(struct notifier_block *unused, unsigned long cmd,
 	pid = task_pid_nr(thread->task) << ASID_BITS;
 	asm volatile(
 	"	mrc	p15, 0, %0, c13, c0, 1\n"
-	"	bfi	%1, %0, #0, %2\n"
-	"	mcr	p15, 0, %1, c13, c0, 1\n"
+	"	and	%0, %0, %2\n"
+	"	orr	%0, %0, %1\n"
+	"	mcr	p15, 0, %0, c13, c0, 1\n"
 	: "=r" (contextidr), "+r" (pid)
-	: "I" (ASID_BITS));
+	: "I" (~ASID_MASK));
 	isb();
 
 	return NOTIFY_OK;

arch/arm/mm/dma-mapping.c

@@ -489,7 +489,7 @@ static bool __in_atomic_pool(void *start, size_t size)
 	void *pool_start = pool->vaddr;
 	void *pool_end = pool->vaddr + pool->size;
 
-	if (start < pool_start || start > pool_end)
+	if (start < pool_start || start >= pool_end)
 		return false;
 
 	if (end <= pool_end)

arch/arm/mm/mm.h

@@ -55,6 +55,9 @@ extern void __flush_dcache_page(struct address_space *mapping, struct page *page
 /* permanent static mappings from iotable_init() */
 #define VM_ARM_STATIC_MAPPING	0x40000000
 
+/* empty mapping */
+#define VM_ARM_EMPTY_MAPPING	0x20000000
+
 /* mapping type (attributes) for permanent static mappings */
 #define VM_ARM_MTYPE(mt)		((mt) << 20)
 #define VM_ARM_MTYPE_MASK	(0x1f << 20)

arch/arm/mm/mmu.c

@@ -807,7 +807,7 @@ static void __init pmd_empty_section_gap(unsigned long addr)
 	vm = early_alloc_aligned(sizeof(*vm), __alignof__(*vm));
 	vm->addr = (void *)addr;
 	vm->size = SECTION_SIZE;
-	vm->flags = VM_IOREMAP | VM_ARM_STATIC_MAPPING;
+	vm->flags = VM_IOREMAP | VM_ARM_EMPTY_MAPPING;
 	vm->caller = pmd_empty_section_gap;
 	vm_area_add_early(vm);
 }
@@ -820,7 +820,7 @@ static void __init fill_pmd_gaps(void)
 
 	/* we're still single threaded hence no lock needed here */
 	for (vm = vmlist; vm; vm = vm->next) {
-		if (!(vm->flags & VM_ARM_STATIC_MAPPING))
+		if (!(vm->flags & (VM_ARM_STATIC_MAPPING | VM_ARM_EMPTY_MAPPING)))
 			continue;
 		addr = (unsigned long)vm->addr;
 		if (addr < next)
@@ -961,8 +961,8 @@ void __init sanity_check_meminfo(void)
 		 * Check whether this memory bank would partially overlap
 		 * the vmalloc area.
 		 */
-		if (__va(bank->start + bank->size) > vmalloc_min ||
-		    __va(bank->start + bank->size) < __va(bank->start)) {
+		if (__va(bank->start + bank->size - 1) >= vmalloc_min ||
+		    __va(bank->start + bank->size - 1) <= __va(bank->start)) {
 			unsigned long newsize = vmalloc_min - __va(bank->start);
 			printk(KERN_NOTICE "Truncating RAM at %.8llx-%.8llx "
 			       "to -%.8llx (vmalloc region overlap).\n",

arch/arm/plat-omap/sram.c

@@ -67,6 +67,7 @@
 
 static unsigned long omap_sram_start;
 static void __iomem *omap_sram_base;
+static unsigned long omap_sram_skip;
 static unsigned long omap_sram_size;
 static void __iomem *omap_sram_ceil;
 
@@ -105,6 +106,7 @@ static int is_sram_locked(void)
  */
 static void __init omap_detect_sram(void)
 {
+	omap_sram_skip = SRAM_BOOTLOADER_SZ;
 	if (cpu_class_is_omap2()) {
 		if (is_sram_locked()) {
 			if (cpu_is_omap34xx()) {
@@ -112,6 +114,7 @@ static void __init omap_detect_sram(void)
 				if ((omap_type() == OMAP2_DEVICE_TYPE_EMU) ||
 				    (omap_type() == OMAP2_DEVICE_TYPE_SEC)) {
 					omap_sram_size = 0x7000; /* 28K */
+					omap_sram_skip += SZ_16K;
 				} else {
 					omap_sram_size = 0x8000; /* 32K */
 				}
@@ -174,8 +177,10 @@ static void __init omap_map_sram(void)
 		return;
 
 #ifdef CONFIG_OMAP4_ERRATA_I688
+	if (cpu_is_omap44xx()) {
 		omap_sram_start += PAGE_SIZE;
 		omap_sram_size -= SZ_16K;
+	}
 #endif
 	if (cpu_is_omap34xx()) {
 		/*
@@ -202,8 +207,8 @@ static void __init omap_map_sram(void)
 	 * Looks like we need to preserve some bootloader code at the
 	 * beginning of SRAM for jumping to flash for reboot to work...
 	 */
-	memset_io(omap_sram_base + SRAM_BOOTLOADER_SZ, 0,
-		  omap_sram_size - SRAM_BOOTLOADER_SZ);
+	memset_io(omap_sram_base + omap_sram_skip, 0,
+		  omap_sram_size - omap_sram_skip);
 }
 
 /*
@@ -217,7 +222,7 @@ void *omap_sram_push_address(unsigned long size)
 {
 	unsigned long available, new_ceil = (unsigned long)omap_sram_ceil;
 
-	available = omap_sram_ceil - (omap_sram_base + SRAM_BOOTLOADER_SZ);
+	available = omap_sram_ceil - (omap_sram_base + omap_sram_skip);
 
 	if (size > available) {
 		pr_err("Not enough space in SRAM\n");

arch/arm/plat-samsung/clock.c

@@ -119,7 +119,7 @@ void clk_disable(struct clk *clk)
 
 unsigned long clk_get_rate(struct clk *clk)
 {
-	if (IS_ERR(clk))
+	if (IS_ERR_OR_NULL(clk))
 		return 0;
 
 	if (clk->rate != 0)
@@ -136,7 +136,7 @@ unsigned long clk_get_rate(struct clk *clk)
 
 long clk_round_rate(struct clk *clk, unsigned long rate)
 {
-	if (!IS_ERR(clk) && clk->ops && clk->ops->round_rate)
+	if (!IS_ERR_OR_NULL(clk) && clk->ops && clk->ops->round_rate)
 		return (clk->ops->round_rate)(clk, rate);
 
 	return rate;
@@ -146,7 +146,7 @@ int clk_set_rate(struct clk *clk, unsigned long rate)
 {
 	int ret;
 
-	if (IS_ERR(clk))
+	if (IS_ERR_OR_NULL(clk))
 		return -EINVAL;
 
 	/* We do not default just do a clk->rate = rate as
@@ -175,7 +175,7 @@ int clk_set_parent(struct clk *clk, struct clk *parent)
 {
 	int ret = 0;
 
-	if (IS_ERR(clk))
+	if (IS_ERR_OR_NULL(clk) || IS_ERR_OR_NULL(parent))
 		return -EINVAL;
 
 	spin_lock(&clocks_lock);

arch/arm/plat-samsung/devs.c

@@ -51,6 +51,7 @@
 #include <plat/ehci.h>
 #include <plat/fb.h>
 #include <plat/fb-s3c2410.h>
+#include <plat/hdmi.h>
 #include <plat/hwmon.h>
 #include <plat/iic.h>
 #include <plat/keypad.h>
@@ -762,7 +763,7 @@ void __init s5p_i2c_hdmiphy_set_platdata(struct s3c2410_platform_i2c *pd)
 			       &s5p_device_i2c_hdmiphy);
 }
 
-struct s5p_hdmi_platform_data s5p_hdmi_def_platdata;
+static struct s5p_hdmi_platform_data s5p_hdmi_def_platdata;
 
 void __init s5p_hdmi_set_platdata(struct i2c_board_info *hdmiphy_info,
 				  struct i2c_board_info *mhl_info, int mhl_bus)

arch/blackfin/Kconfig

@@ -38,6 +38,7 @@ config BLACKFIN
 	select GENERIC_ATOMIC64
 	select GENERIC_IRQ_PROBE
 	select IRQ_PER_CPU if SMP
+	select USE_GENERIC_SMP_HELPERS if SMP
 	select HAVE_NMI_WATCHDOG if NMI_WATCHDOG
 	select GENERIC_SMP_IDLE_THREAD
 	select ARCH_USES_GETTIMEOFFSET if !GENERIC_CLOCKEVENTS

arch/blackfin/Makefile

@@ -20,7 +20,6 @@ endif
 KBUILD_AFLAGS           += $(call cc-option,-mno-fdpic)
 KBUILD_CFLAGS_MODULE    += -mlong-calls
 LDFLAGS                 += -m elf32bfin
-KALLSYMS         += --symbol-prefix=_
 
 KBUILD_DEFCONFIG := BF537-STAMP_defconfig
 

arch/blackfin/include/asm/smp.h

@@ -18,6 +18,8 @@
 #define raw_smp_processor_id()  blackfin_core_id()
 
 extern void bfin_relocate_coreb_l1_mem(void);
+extern void arch_send_call_function_single_ipi(int cpu);
+extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
 
 #if defined(CONFIG_SMP) && defined(CONFIG_ICACHE_FLUSH_L1)
 asmlinkage void blackfin_icache_flush_range_l1(unsigned long *ptr);

arch/blackfin/mach-common/smp.c

@@ -48,10 +48,13 @@ unsigned long blackfin_iflush_l1_entry[NR_CPUS];
 
 struct blackfin_initial_pda __cpuinitdata initial_pda_coreb;
 
-#define BFIN_IPI_TIMER	      0
-#define BFIN_IPI_RESCHEDULE   1
-#define BFIN_IPI_CALL_FUNC    2
-#define BFIN_IPI_CPU_STOP     3
+enum ipi_message_type {
+	BFIN_IPI_TIMER,
+	BFIN_IPI_RESCHEDULE,
+	BFIN_IPI_CALL_FUNC,
+	BFIN_IPI_CALL_FUNC_SINGLE,
+	BFIN_IPI_CPU_STOP,
+};
 
 struct blackfin_flush_data {
 	unsigned long start;
@@ -60,35 +63,20 @@ struct blackfin_flush_data {
 
 void *secondary_stack;
 
-
-struct smp_call_struct {
-	void (*func)(void *info);
-	void *info;
-	int wait;
-	cpumask_t *waitmask;
-};
-
 static struct blackfin_flush_data smp_flush_data;
 
 static DEFINE_SPINLOCK(stop_lock);
 
-struct ipi_message {
-	unsigned long type;
-	struct smp_call_struct call_struct;
-};
-
 /* A magic number - stress test shows this is safe for common cases */
 #define BFIN_IPI_MSGQ_LEN 5
 
 /* Simple FIFO buffer, overflow leads to panic */
-struct ipi_message_queue {
-	spinlock_t lock;
+struct ipi_data {
 	unsigned long count;
-	unsigned long head; /* head of the queue */
-	struct ipi_message ipi_message[BFIN_IPI_MSGQ_LEN];
+	unsigned long bits;
 };
 
-static DEFINE_PER_CPU(struct ipi_message_queue, ipi_msg_queue);
+static DEFINE_PER_CPU(struct ipi_data, bfin_ipi);
 
 static void ipi_cpu_stop(unsigned int cpu)
 {
@@ -129,28 +117,6 @@ static void ipi_flush_icache(void *info)
 	blackfin_icache_flush_range(fdata->start, fdata->end);
 }
 
-static void ipi_call_function(unsigned int cpu, struct ipi_message *msg)
-{
-	int wait;
-	void (*func)(void *info);
-	void *info;
-	func = msg->call_struct.func;
-	info = msg->call_struct.info;
-	wait = msg->call_struct.wait;
-	func(info);
-	if (wait) {
-#ifdef __ARCH_SYNC_CORE_DCACHE
-		/*
-		 * 'wait' usually means synchronization between CPUs.
-		 * Invalidate D cache in case shared data was changed
-		 * by func() to ensure cache coherence.
-		 */
-		resync_core_dcache();
-#endif
-		cpumask_clear_cpu(cpu, msg->call_struct.waitmask);
-	}
-}
-
 /* Use IRQ_SUPPLE_0 to request reschedule.
  * When returning from interrupt to user space,
  * there is chance to reschedule */
@@ -172,152 +138,95 @@ void ipi_timer(void)
 
 static irqreturn_t ipi_handler_int1(int irq, void *dev_instance)
 {
-	struct ipi_message *msg;
-	struct ipi_message_queue *msg_queue;
+	struct ipi_data *bfin_ipi_data;
 	unsigned int cpu = smp_processor_id();
-	unsigned long flags;
+	unsigned long pending;
+	unsigned long msg;
 
 	platform_clear_ipi(cpu, IRQ_SUPPLE_1);
 
-	msg_queue = &__get_cpu_var(ipi_msg_queue);
-
-	spin_lock_irqsave(&msg_queue->lock, flags);
-
-	while (msg_queue->count) {
-		msg = &msg_queue->ipi_message[msg_queue->head];
-		switch (msg->type) {
-		case BFIN_IPI_TIMER:
-			ipi_timer();
-			break;
-		case BFIN_IPI_RESCHEDULE:
-			scheduler_ipi();
-			break;
-		case BFIN_IPI_CALL_FUNC:
-			ipi_call_function(cpu, msg);
-			break;
-		case BFIN_IPI_CPU_STOP:
-			ipi_cpu_stop(cpu);
-			break;
-		default:
-			printk(KERN_CRIT "CPU%u: Unknown IPI message 0x%lx\n",
-			       cpu, msg->type);
-			break;
-		}
-		msg_queue->head++;
-		msg_queue->head %= BFIN_IPI_MSGQ_LEN;
-		msg_queue->count--;
+	bfin_ipi_data = &__get_cpu_var(bfin_ipi);
+
+	while ((pending = xchg(&bfin_ipi_data->bits, 0)) != 0) {
+		msg = 0;
+		do {
+			msg = find_next_bit(&pending, BITS_PER_LONG, msg + 1);
+			switch (msg) {
+			case BFIN_IPI_TIMER:
+				ipi_timer();
+				break;
+			case BFIN_IPI_RESCHEDULE:
+				scheduler_ipi();
+				break;
+			case BFIN_IPI_CALL_FUNC:
+				generic_smp_call_function_interrupt();
+				break;
+
+			case BFIN_IPI_CALL_FUNC_SINGLE:
+				generic_smp_call_function_single_interrupt();
+				break;
+
+			case BFIN_IPI_CPU_STOP:
+				ipi_cpu_stop(cpu);
+				break;
+			}
+		} while (msg < BITS_PER_LONG);
+
+		smp_mb();
 	}
-	spin_unlock_irqrestore(&msg_queue->lock, flags);
 	return IRQ_HANDLED;
 }
 
-static void ipi_queue_init(void)
+static void bfin_ipi_init(void)
 {
 	unsigned int cpu;
-	struct ipi_message_queue *msg_queue;
+	struct ipi_data *bfin_ipi_data;
 	for_each_possible_cpu(cpu) {
-		msg_queue = &per_cpu(ipi_msg_queue, cpu);
-		spin_lock_init(&msg_queue->lock);
-		msg_queue->count = 0;
-		msg_queue->head = 0;
+		bfin_ipi_data = &per_cpu(bfin_ipi, cpu);
+		bfin_ipi_data->bits = 0;
+		bfin_ipi_data->count = 0;
 	}
 }
 
-static inline void smp_send_message(cpumask_t callmap, unsigned long type,
-					void (*func) (void *info), void *info, int wait)
+void send_ipi(const struct cpumask *cpumask, enum ipi_message_type msg)
 {
 	unsigned int cpu;
-	struct ipi_message_queue *msg_queue;
-	struct ipi_message *msg;
-	unsigned long flags, next_msg;
-	cpumask_t waitmask; /* waitmask is shared by all cpus */
-
-	cpumask_copy(&waitmask, &callmap);
-	for_each_cpu(cpu, &callmap) {
-		msg_queue = &per_cpu(ipi_msg_queue, cpu);
-		spin_lock_irqsave(&msg_queue->lock, flags);
-		if (msg_queue->count < BFIN_IPI_MSGQ_LEN) {
-			next_msg = (msg_queue->head + msg_queue->count)
-					% BFIN_IPI_MSGQ_LEN;
-			msg = &msg_queue->ipi_message[next_msg];
-			msg->type = type;
-			if (type == BFIN_IPI_CALL_FUNC) {
-				msg->call_struct.func = func;
-				msg->call_struct.info = info;
-				msg->call_struct.wait = wait;
-				msg->call_struct.waitmask = &waitmask;
-			}
-			msg_queue->count++;
-		} else
-			panic("IPI message queue overflow\n");
-		spin_unlock_irqrestore(&msg_queue->lock, flags);
+	struct ipi_data *bfin_ipi_data;
+	unsigned long flags;
+
+	local_irq_save(flags);
+
+	for_each_cpu(cpu, cpumask) {
+		bfin_ipi_data = &per_cpu(bfin_ipi, cpu);
+		smp_mb();
+		set_bit(msg, &bfin_ipi_data->bits);
+		bfin_ipi_data->count++;
 		platform_send_ipi_cpu(cpu, IRQ_SUPPLE_1);
 	}
 
-	if (wait) {
-		while (!cpumask_empty(&waitmask))
-			blackfin_dcache_invalidate_range(
-				(unsigned long)(&waitmask),
-				(unsigned long)(&waitmask));
-#ifdef __ARCH_SYNC_CORE_DCACHE
-		/*
-		 * Invalidate D cache in case shared data was changed by
-		 * other processors to ensure cache coherence.
-		 */
-		resync_core_dcache();
-#endif
-	}
+	local_irq_restore(flags);
 }
 
-int smp_call_function(void (*func)(void *info), void *info, int wait)
+void arch_send_call_function_single_ipi(int cpu)
 {
-	cpumask_t callmap;
-
-	preempt_disable();
-	cpumask_copy(&callmap, cpu_online_mask);
-	cpumask_clear_cpu(smp_processor_id(), &callmap);
-	if (!cpumask_empty(&callmap))
-		smp_send_message(callmap, BFIN_IPI_CALL_FUNC, func, info, wait);
-
-	preempt_enable();
-
-	return 0;
+	send_ipi(cpumask_of(cpu), BFIN_IPI_CALL_FUNC_SINGLE);
 }
-EXPORT_SYMBOL_GPL(smp_call_function);
 
-int smp_call_function_single(int cpuid, void (*func) (void *info), void *info,
-				int wait)
+void arch_send_call_function_ipi_mask(const struct cpumask *mask)
 {
-	unsigned int cpu = cpuid;
-	cpumask_t callmap;
-
-	if (cpu_is_offline(cpu))
-		return 0;
-	cpumask_clear(&callmap);
-	cpumask_set_cpu(cpu, &callmap);
-
-	smp_send_message(callmap, BFIN_IPI_CALL_FUNC, func, info, wait);
-
-	return 0;
+	send_ipi(mask, BFIN_IPI_CALL_FUNC);
 }
-EXPORT_SYMBOL_GPL(smp_call_function_single);
 
 void smp_send_reschedule(int cpu)
 {
-	cpumask_t callmap;
-	/* simply trigger an ipi */
-
-	cpumask_clear(&callmap);
-	cpumask_set_cpu(cpu, &callmap);
-
-	smp_send_message(callmap, BFIN_IPI_RESCHEDULE, NULL, NULL, 0);
+	send_ipi(cpumask_of(cpu), BFIN_IPI_RESCHEDULE);
 
 	return;
 }
 
 void smp_send_msg(const struct cpumask *mask, unsigned long type)
 {
-	smp_send_message(*mask, type, NULL, NULL, 0);
+	send_ipi(mask, type);
 }
 
 void smp_timer_broadcast(const struct cpumask *mask)
@@ -333,7 +242,7 @@ void smp_send_stop(void)
 	cpumask_copy(&callmap, cpu_online_mask);
 	cpumask_clear_cpu(smp_processor_id(), &callmap);
 	if (!cpumask_empty(&callmap))
-		smp_send_message(callmap, BFIN_IPI_CPU_STOP, NULL, NULL, 0);
+		send_ipi(&callmap, BFIN_IPI_CPU_STOP);
 
 	preempt_enable();
 
@@ -436,7 +345,7 @@ void __init smp_prepare_boot_cpu(void)
 void __init smp_prepare_cpus(unsigned int max_cpus)
 {
 	platform_prepare_cpus(max_cpus);
-	ipi_queue_init();
+	bfin_ipi_init();
 	platform_request_ipi(IRQ_SUPPLE_0, ipi_handler_int0);
 	platform_request_ipi(IRQ_SUPPLE_1, ipi_handler_int1);
 }

arch/s390/oprofile/init.c

@@ -169,7 +169,7 @@ static ssize_t hw_interval_write(struct file *file, char const __user *buf,
 	if (*offset)
 		return -EINVAL;
 	retval = oprofilefs_ulong_from_user(&val, buf, count);
-	if (retval)
+	if (retval <= 0)
 		return retval;
 	if (val < oprofile_min_interval)
 		oprofile_hw_interval = oprofile_min_interval;
@@ -212,7 +212,7 @@ static ssize_t hwsampler_zero_write(struct file *file, char const __user *buf,
 		return -EINVAL;
 
 	retval = oprofilefs_ulong_from_user(&val, buf, count);
-	if (retval)
+	if (retval <= 0)
 		return retval;
 	if (val != 0)
 		return -EINVAL;
@@ -243,7 +243,7 @@ static ssize_t hwsampler_kernel_write(struct file *file, char const __user *buf,
 		return -EINVAL;
 
 	retval = oprofilefs_ulong_from_user(&val, buf, count);
-	if (retval)
+	if (retval <= 0)
 		return retval;
 
 	if (val != 0 && val != 1)
@@ -278,7 +278,7 @@ static ssize_t hwsampler_user_write(struct file *file, char const __user *buf,
 		return -EINVAL;
 
 	retval = oprofilefs_ulong_from_user(&val, buf, count);
-	if (retval)
+	if (retval <= 0)
 		return retval;
 
 	if (val != 0 && val != 1)
@@ -317,7 +317,7 @@ static ssize_t timer_enabled_write(struct file *file, char const __user *buf,
 		return -EINVAL;
 
 	retval = oprofilefs_ulong_from_user(&val, buf, count);
-	if (retval)
+	if (retval <= 0)
 		return retval;
 
 	if (val != 0 && val != 1)

arch/x86/kernel/cpu/perf_event_intel.c

@@ -2008,6 +2008,7 @@ __init int intel_pmu_init(void)
 		break;
 
 	case 28: /* Atom */
+	case 54: /* Cedariew */
 		memcpy(hw_cache_event_ids, atom_hw_cache_event_ids,
 		       sizeof(hw_cache_event_ids));
 

arch/x86/kernel/cpu/perf_event_intel_lbr.c

@@ -686,7 +686,8 @@ void intel_pmu_lbr_init_atom(void)
 	 * to have an operational LBR which can freeze
 	 * on PMU interrupt
 	 */
-	if (boot_cpu_data.x86_mask < 10) {
+	if (boot_cpu_data.x86_model == 28
+	    && boot_cpu_data.x86_mask < 10) {
 		pr_cont("LBR disabled due to erratum");
 		return;
 	}

arch/x86/kernel/microcode_core.c

@@ -225,6 +225,9 @@ static ssize_t microcode_write(struct file *file, const char __user *buf,
 	if (do_microcode_update(buf, len) == 0)
 		ret = (ssize_t)len;
 
+	if (ret > 0)
+		perf_check_microcode();
+
 	mutex_unlock(&microcode_mutex);
 	put_online_cpus();
 

arch/x86/kvm/i8259.c

@@ -318,7 +318,7 @@ static void pic_ioport_write(void *opaque, u32 addr, u32 val)
 		if (val & 0x10) {
 			u8 edge_irr = s->irr & ~s->elcr;
 			int i;
-			bool found;
+			bool found = false;
 			struct kvm_vcpu *vcpu;
 
 			s->init4 = val & 1;

arch/x86/kvm/vmx.c

@@ -3619,6 +3619,7 @@ static void seg_setup(int seg)
 
 static int alloc_apic_access_page(struct kvm *kvm)
 {
+	struct page *page;
 	struct kvm_userspace_memory_region kvm_userspace_mem;
 	int r = 0;
 
@@ -3633,7 +3634,13 @@ static int alloc_apic_access_page(struct kvm *kvm)
 	if (r)
 		goto out;
 
-	kvm->arch.apic_access_page = gfn_to_page(kvm, 0xfee00);
+	page = gfn_to_page(kvm, 0xfee00);
+	if (is_error_page(page)) {
+		r = -EFAULT;
+		goto out;
+	}
+
+	kvm->arch.apic_access_page = page;
 out:
 	mutex_unlock(&kvm->slots_lock);
 	return r;
@@ -3641,6 +3648,7 @@ out:
 
 static int alloc_identity_pagetable(struct kvm *kvm)
 {
+	struct page *page;
 	struct kvm_userspace_memory_region kvm_userspace_mem;
 	int r = 0;
 
@@ -3656,8 +3664,13 @@ static int alloc_identity_pagetable(struct kvm *kvm)
 	if (r)
 		goto out;
 
-	kvm->arch.ept_identity_pagetable = gfn_to_page(kvm,
-			kvm->arch.ept_identity_map_addr >> PAGE_SHIFT);
+	page = gfn_to_page(kvm, kvm->arch.ept_identity_map_addr >> PAGE_SHIFT);
+	if (is_error_page(page)) {
+		r = -EFAULT;
+		goto out;
+	}
+
+	kvm->arch.ept_identity_pagetable = page;
 out:
 	mutex_unlock(&kvm->slots_lock);
 	return r;
@@ -6575,7 +6588,7 @@ static void vmx_cpuid_update(struct kvm_vcpu *vcpu)
 	/* Exposing INVPCID only when PCID is exposed */
 	best = kvm_find_cpuid_entry(vcpu, 0x7, 0);
 	if (vmx_invpcid_supported() &&
-	    best && (best->ecx & bit(X86_FEATURE_INVPCID)) &&
+	    best && (best->ebx & bit(X86_FEATURE_INVPCID)) &&
 	    guest_cpuid_has_pcid(vcpu)) {
 		exec_control |= SECONDARY_EXEC_ENABLE_INVPCID;
 		vmcs_write32(SECONDARY_VM_EXEC_CONTROL,
@@ -6585,7 +6598,7 @@ static void vmx_cpuid_update(struct kvm_vcpu *vcpu)
 		vmcs_write32(SECONDARY_VM_EXEC_CONTROL,
 			     exec_control);
 		if (best)
-			best->ecx &= ~bit(X86_FEATURE_INVPCID);
+			best->ebx &= ~bit(X86_FEATURE_INVPCID);
 	}
 }
 

arch/x86/kvm/x86.c

@@ -5113,17 +5113,20 @@ static void post_kvm_run_save(struct kvm_vcpu *vcpu)
 			!kvm_event_needs_reinjection(vcpu);
 }
 
-static void vapic_enter(struct kvm_vcpu *vcpu)
+static int vapic_enter(struct kvm_vcpu *vcpu)
 {
 	struct kvm_lapic *apic = vcpu->arch.apic;
 	struct page *page;
 
 	if (!apic || !apic->vapic_addr)
-		return;
+		return 0;
 
 	page = gfn_to_page(vcpu->kvm, apic->vapic_addr >> PAGE_SHIFT);
+	if (is_error_page(page))
+		return -EFAULT;
 
 	vcpu->arch.apic->vapic_page = page;
+	return 0;
 }
 
 static void vapic_exit(struct kvm_vcpu *vcpu)
@@ -5430,7 +5433,11 @@ static int __vcpu_run(struct kvm_vcpu *vcpu)
 	}
 
 	vcpu->srcu_idx = srcu_read_lock(&kvm->srcu);
-	vapic_enter(vcpu);
+	r = vapic_enter(vcpu);
+	if (r) {
+		srcu_read_unlock(&kvm->srcu, vcpu->srcu_idx);
+		return r;
+	}
 
 	r = 1;
 	while (r > 0) {

crypto/authenc.c

@@ -336,7 +336,7 @@ static int crypto_authenc_genicv(struct aead_request *req, u8 *iv,
 		cryptlen += ivsize;
 	}
 
-	if (sg_is_last(assoc)) {
+	if (req->assoclen && sg_is_last(assoc)) {
 		authenc_ahash_fn = crypto_authenc_ahash;
 		sg_init_table(asg, 2);
 		sg_set_page(asg, sg_page(assoc), assoc->length, assoc->offset);
@@ -490,7 +490,7 @@ static int crypto_authenc_iverify(struct aead_request *req, u8 *iv,
 		cryptlen += ivsize;
 	}
 
-	if (sg_is_last(assoc)) {
+	if (req->assoclen && sg_is_last(assoc)) {
 		authenc_ahash_fn = crypto_authenc_ahash;
 		sg_init_table(asg, 2);
 		sg_set_page(asg, sg_page(assoc), assoc->length, assoc->offset);

drivers/acpi/bus.c

@@ -237,6 +237,16 @@ static int __acpi_bus_get_power(struct acpi_device *device, int *state)
 	} else if (result == ACPI_STATE_D3_HOT) {
 		result = ACPI_STATE_D3;
 	}
+
+	/*
+	 * If we were unsure about the device parent's power state up to this
+	 * point, the fact that the device is in D0 implies that the parent has
+	 * to be in D0 too.
+	 */
+	if (device->parent && device->parent->power.state == ACPI_STATE_UNKNOWN
+	    && result == ACPI_STATE_D0)
+		device->parent->power.state = ACPI_STATE_D0;
+
 	*state = result;
 
  out:

drivers/acpi/power.c

@@ -107,6 +107,7 @@ struct acpi_power_resource {
 
 	/* List of devices relying on this power resource */
 	struct acpi_power_resource_device *devices;
+	struct mutex devices_lock;
 };
 
 static struct list_head acpi_power_resource_list;
@@ -225,7 +226,6 @@ static void acpi_power_on_device(struct acpi_power_managed_device *device)
 
 static int __acpi_power_on(struct acpi_power_resource *resource)
 {
-	struct acpi_power_resource_device *device_list = resource->devices;
 	acpi_status status = AE_OK;
 
 	status = acpi_evaluate_object(resource->device->handle, "_ON", NULL, NULL);
@@ -238,19 +238,15 @@ static int __acpi_power_on(struct acpi_power_resource *resource)
 	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Power resource [%s] turned on\n",
 			  resource->name));
 
-	while (device_list) {
-		acpi_power_on_device(device_list->device);
-
-		device_list = device_list->next;
-	}
-
 	return 0;
 }
 
 static int acpi_power_on(acpi_handle handle)
 {
 	int result = 0;
+	bool resume_device = false;
 	struct acpi_power_resource *resource = NULL;
+	struct acpi_power_resource_device *device_list;
 
 	result = acpi_power_get_context(handle, &resource);
 	if (result)
@@ -266,10 +262,25 @@ static int acpi_power_on(acpi_handle handle)
 		result = __acpi_power_on(resource);
 		if (result)
 			resource->ref_count--;
+		else
+			resume_device = true;
 	}
 
 	mutex_unlock(&resource->resource_lock);
 
+	if (!resume_device)
+		return result;
+
+	mutex_lock(&resource->devices_lock);
+
+	device_list = resource->devices;
+	while (device_list) {
+		acpi_power_on_device(device_list->device);
+		device_list = device_list->next;
+	}
+
+	mutex_unlock(&resource->devices_lock);
+
 	return result;
 }
 
@@ -355,7 +366,7 @@ static void __acpi_power_resource_unregister_device(struct device *dev,
 	if (acpi_power_get_context(res_handle, &resource))
 		return;
 
-	mutex_lock(&resource->resource_lock);
+	mutex_lock(&resource->devices_lock);
 	prev = NULL;
 	curr = resource->devices;
 	while (curr) {
@@ -372,7 +383,7 @@ static void __acpi_power_resource_unregister_device(struct device *dev,
 		prev = curr;
 		curr = curr->next;
 	}
-	mutex_unlock(&resource->resource_lock);
+	mutex_unlock(&resource->devices_lock);
 }
 
 /* Unlink dev from all power resources in _PR0 */
@@ -414,10 +425,10 @@ static int __acpi_power_resource_register_device(
 
 	power_resource_device->device = powered_device;
 
-	mutex_lock(&resource->resource_lock);
+	mutex_lock(&resource->devices_lock);
 	power_resource_device->next = resource->devices;
 	resource->devices = power_resource_device;
-	mutex_unlock(&resource->resource_lock);
+	mutex_unlock(&resource->devices_lock);
 
 	return 0;
 }
@@ -462,7 +473,7 @@ int acpi_power_resource_register_device(struct device *dev, acpi_handle handle)
 	return ret;
 
 no_power_resource:
-	printk(KERN_WARNING PREFIX "Invalid Power Resource to register!");
+	printk(KERN_DEBUG PREFIX "Invalid Power Resource to register!");
 	return -ENODEV;
 }
 EXPORT_SYMBOL_GPL(acpi_power_resource_register_device);
@@ -721,6 +732,7 @@ static int acpi_power_add(struct acpi_device *device)
 
 	resource->device = device;
 	mutex_init(&resource->resource_lock);
+	mutex_init(&resource->devices_lock);
 	strcpy(resource->name, device->pnp.bus_id);
 	strcpy(acpi_device_name(device), ACPI_POWER_DEVICE_NAME);
 	strcpy(acpi_device_class(device), ACPI_POWER_CLASS);

drivers/ata/ahci.c

@@ -268,6 +268,9 @@ static const struct pci_device_id ahci_pci_tbl[] = {
 	/* JMicron 360/1/3/5/6, match class to avoid IDE function */
 	{ PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
 	  PCI_CLASS_STORAGE_SATA_AHCI, 0xffffff, board_ahci_ign_iferr },
+	/* JMicron 362B and 362C have an AHCI function with IDE class code */
+	{ PCI_VDEVICE(JMICRON, 0x2362), board_ahci_ign_iferr },
+	{ PCI_VDEVICE(JMICRON, 0x236f), board_ahci_ign_iferr },
 
 	/* ATI */
 	{ PCI_VDEVICE(ATI, 0x4380), board_ahci_sb600 }, /* ATI SB600 */
@@ -393,6 +396,8 @@ static const struct pci_device_id ahci_pci_tbl[] = {
 	  .driver_data = board_ahci_yes_fbs },			/* 88se9125 */
 	{ PCI_DEVICE(0x1b4b, 0x917a),
 	  .driver_data = board_ahci_yes_fbs },			/* 88se9172 */
+	{ PCI_DEVICE(0x1b4b, 0x9192),
+	  .driver_data = board_ahci_yes_fbs },			/* 88se9172 on some Gigabyte */
 	{ PCI_DEVICE(0x1b4b, 0x91a3),
 	  .driver_data = board_ahci_yes_fbs },
 
@@ -400,7 +405,10 @@ static const struct pci_device_id ahci_pci_tbl[] = {
 	{ PCI_VDEVICE(PROMISE, 0x3f20), board_ahci },	/* PDC42819 */
 
 	/* Asmedia */
-	{ PCI_VDEVICE(ASMEDIA, 0x0612), board_ahci },	/* ASM1061 */
+	{ PCI_VDEVICE(ASMEDIA, 0x0601), board_ahci },	/* ASM1060 */
+	{ PCI_VDEVICE(ASMEDIA, 0x0602), board_ahci },	/* ASM1060 */
+	{ PCI_VDEVICE(ASMEDIA, 0x0611), board_ahci },	/* ASM1061 */
+	{ PCI_VDEVICE(ASMEDIA, 0x0612), board_ahci },	/* ASM1062 */
 
 	/* Generic, PCI class code for AHCI */
 	{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,

drivers/bluetooth/ath3k.c

@@ -86,6 +86,7 @@ static struct usb_device_id ath3k_table[] = {
 
 	/* Atheros AR5BBU22 with sflash firmware */
 	{ USB_DEVICE(0x0489, 0xE03C) },
+	{ USB_DEVICE(0x0489, 0xE036) },
 
 	{ }	/* Terminating entry */
 };
@@ -109,6 +110,7 @@ static struct usb_device_id ath3k_blist_tbl[] = {
 
 	/* Atheros AR5BBU22 with sflash firmware */
 	{ USB_DEVICE(0x0489, 0xE03C), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x0489, 0xE036), .driver_info = BTUSB_ATH3012 },
 
 	{ }	/* Terminating entry */
 };

drivers/bluetooth/btusb.c

@@ -52,6 +52,9 @@ static struct usb_device_id btusb_table[] = {
 	/* Generic Bluetooth USB device */
 	{ USB_DEVICE_INFO(0xe0, 0x01, 0x01) },
 
+	/* Apple-specific (Broadcom) devices */
+	{ USB_VENDOR_AND_INTERFACE_INFO(0x05ac, 0xff, 0x01, 0x01) },
+
 	/* Broadcom SoftSailing reporting vendor specific */
 	{ USB_DEVICE(0x0a5c, 0x21e1) },
 
@@ -94,16 +97,14 @@ static struct usb_device_id btusb_table[] = {
 
 	/* Broadcom BCM20702A0 */
 	{ USB_DEVICE(0x0489, 0xe042) },
-	{ USB_DEVICE(0x0a5c, 0x21e3) },
-	{ USB_DEVICE(0x0a5c, 0x21e6) },
-	{ USB_DEVICE(0x0a5c, 0x21e8) },
-	{ USB_DEVICE(0x0a5c, 0x21f3) },
-	{ USB_DEVICE(0x0a5c, 0x21f4) },
 	{ USB_DEVICE(0x413c, 0x8197) },
 
 	/* Foxconn - Hon Hai */
 	{ USB_DEVICE(0x0489, 0xe033) },
 
+	/*Broadcom devices with vendor specific id */
+	{ USB_VENDOR_AND_INTERFACE_INFO(0x0a5c, 0xff, 0x01, 0x01) },
+
 	{ }	/* Terminating entry */
 };
 
@@ -141,6 +142,7 @@ static struct usb_device_id blacklist_table[] = {
 
 	/* Atheros AR5BBU12 with sflash firmware */
 	{ USB_DEVICE(0x0489, 0xe03c), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x0489, 0xe036), .driver_info = BTUSB_ATH3012 },
 
 	/* Broadcom BCM2035 */
 	{ USB_DEVICE(0x0a5c, 0x2035), .driver_info = BTUSB_WRONG_SCO_MTU },

drivers/crypto/caam/key_gen.c

@@ -120,3 +120,4 @@ u32 gen_split_key(struct device *jrdev, u8 *key_out, int split_key_len,
 
 	return ret;
 }
+EXPORT_SYMBOL(gen_split_key);

drivers/extcon/extcon-max77693.c

@@ -669,13 +669,18 @@ static int __devinit max77693_muic_probe(struct platform_device *pdev)
 	}
 	info->dev = &pdev->dev;
 	info->max77693 = max77693;
-	info->max77693->regmap_muic = regmap_init_i2c(info->max77693->muic,
-					 &max77693_muic_regmap_config);
-	if (IS_ERR(info->max77693->regmap_muic)) {
-		ret = PTR_ERR(info->max77693->regmap_muic);
-		dev_err(max77693->dev,
-			"failed to allocate register map: %d\n", ret);
-		goto err_regmap;
+	if (info->max77693->regmap_muic)
+		dev_dbg(&pdev->dev, "allocate register map\n");
+	else {
+		info->max77693->regmap_muic = devm_regmap_init_i2c(
+						info->max77693->muic,
+						&max77693_muic_regmap_config);
+		if (IS_ERR(info->max77693->regmap_muic)) {
+			ret = PTR_ERR(info->max77693->regmap_muic);
+			dev_err(max77693->dev,
+				"failed to allocate register map: %d\n", ret);
+			goto err_regmap;
+		}
 	}
 	platform_set_drvdata(pdev, info);
 	mutex_init(&info->mutex);

drivers/gpu/drm/ast/ast_drv.c

@@ -193,6 +193,9 @@ static const struct file_operations ast_fops = {
 	.mmap = ast_mmap,
 	.poll = drm_poll,
 	.fasync = drm_fasync,
+#ifdef CONFIG_COMPAT
+	.compat_ioctl = drm_compat_ioctl,
+#endif
 	.read = drm_read,
 };
 

drivers/gpu/drm/ast/ast_mode.c

@@ -841,7 +841,7 @@ int ast_cursor_init(struct drm_device *dev)
 
 	ast->cursor_cache = obj;
 	ast->cursor_cache_gpu_addr = gpu_addr;
-	DRM_ERROR("pinned cursor cache at %llx\n", ast->cursor_cache_gpu_addr);
+	DRM_DEBUG_KMS("pinned cursor cache at %llx\n", ast->cursor_cache_gpu_addr);
 	return 0;
 fail:
 	return ret;

drivers/gpu/drm/cirrus/cirrus_drv.c

@@ -74,6 +74,9 @@ static const struct file_operations cirrus_driver_fops = {
 	.unlocked_ioctl = drm_ioctl,
 	.mmap = cirrus_mmap,
 	.poll = drm_poll,
+#ifdef CONFIG_COMPAT
+	.compat_ioctl = drm_compat_ioctl,
+#endif
 	.fasync = drm_fasync,
 };
 static struct drm_driver driver = {

drivers/gpu/drm/exynos/Kconfig

@@ -36,6 +36,6 @@ config DRM_EXYNOS_VIDI
 
 config DRM_EXYNOS_G2D
 	bool "Exynos DRM G2D"
-	depends on DRM_EXYNOS
+	depends on DRM_EXYNOS && !VIDEO_SAMSUNG_S5P_G2D
 	help
 	  Choose this option if you want to use Exynos G2D for DRM.

drivers/gpu/drm/exynos/exynos_drm_dmabuf.c

@@ -163,6 +163,12 @@ static void exynos_gem_dmabuf_kunmap(struct dma_buf *dma_buf,
 	/* TODO */
 }
 
+static int exynos_gem_dmabuf_mmap(struct dma_buf *dma_buf,
+	struct vm_area_struct *vma)
+{
+	return -ENOTTY;
+}
+
 static struct dma_buf_ops exynos_dmabuf_ops = {
 	.map_dma_buf		= exynos_gem_map_dma_buf,
 	.unmap_dma_buf		= exynos_gem_unmap_dma_buf,
@@ -170,6 +176,7 @@ static struct dma_buf_ops exynos_dmabuf_ops = {
 	.kmap_atomic		= exynos_gem_dmabuf_kmap_atomic,
 	.kunmap			= exynos_gem_dmabuf_kunmap,
 	.kunmap_atomic		= exynos_gem_dmabuf_kunmap_atomic,
+	.mmap			= exynos_gem_dmabuf_mmap,
 	.release		= exynos_dmabuf_release,
 };
 

drivers/gpu/drm/exynos/exynos_drm_drv.c

@@ -160,7 +160,6 @@ static int exynos_drm_open(struct drm_device *dev, struct drm_file *file)
 	if (!file_priv)
 		return -ENOMEM;
 
-	drm_prime_init_file_private(&file->prime);
 	file->driver_priv = file_priv;
 
 	return exynos_drm_subdrv_open(dev, file);
@@ -184,7 +183,6 @@ static void exynos_drm_preclose(struct drm_device *dev,
 			e->base.destroy(&e->base);
 		}
 	}
-	drm_prime_destroy_file_private(&file->prime);
 	spin_unlock_irqrestore(&dev->event_lock, flags);
 
 	exynos_drm_subdrv_close(dev, file);
@@ -241,6 +239,9 @@ static const struct file_operations exynos_drm_driver_fops = {
 	.poll		= drm_poll,
 	.read		= drm_read,
 	.unlocked_ioctl	= drm_ioctl,
+#ifdef CONFIG_COMPAT
+	.compat_ioctl = drm_compat_ioctl,
+#endif
 	.release	= drm_release,
 };
 

drivers/gpu/drm/exynos/exynos_drm_fimd.c

@@ -831,11 +831,6 @@ static int __devinit fimd_probe(struct platform_device *pdev)
 	}
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res) {
-		dev_err(dev, "failed to find registers\n");
-		ret = -ENOENT;
-		goto err_clk;
-	}
 
 	ctx->regs = devm_request_and_ioremap(&pdev->dev, res);
 	if (!ctx->regs) {

drivers/gpu/drm/exynos/exynos_drm_g2d.c

@@ -129,7 +129,6 @@ struct g2d_runqueue_node {
 struct g2d_data {
 	struct device			*dev;
 	struct clk			*gate_clk;
-	struct resource			*regs_res;
 	void __iomem			*regs;
 	int				irq;
 	struct workqueue_struct		*g2d_workq;
@@ -751,7 +750,7 @@ static int __devinit g2d_probe(struct platform_device *pdev)
 	struct exynos_drm_subdrv *subdrv;
 	int ret;
 
-	g2d = kzalloc(sizeof(*g2d), GFP_KERNEL);
+	g2d = devm_kzalloc(&pdev->dev, sizeof(*g2d), GFP_KERNEL);
 	if (!g2d) {
 		dev_err(dev, "failed to allocate driver data\n");
 		return -ENOMEM;
@@ -759,10 +758,8 @@ static int __devinit g2d_probe(struct platform_device *pdev)
 
 	g2d->runqueue_slab = kmem_cache_create("g2d_runqueue_slab",
 			sizeof(struct g2d_runqueue_node), 0, 0, NULL);
-	if (!g2d->runqueue_slab) {
-		ret = -ENOMEM;
-		goto err_free_mem;
-	}
+	if (!g2d->runqueue_slab)
+		return -ENOMEM;
 
 	g2d->dev = dev;
 
@@ -794,38 +791,26 @@ static int __devinit g2d_probe(struct platform_device *pdev)
 	pm_runtime_enable(dev);
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res) {
-		dev_err(dev, "failed to get I/O memory\n");
-		ret = -ENOENT;
-		goto err_put_clk;
-	}
 
-	g2d->regs_res = request_mem_region(res->start, resource_size(res),
-					   dev_name(dev));
-	if (!g2d->regs_res) {
-		dev_err(dev, "failed to request I/O memory\n");
-		ret = -ENOENT;
-		goto err_put_clk;
-	}
-
-	g2d->regs = ioremap(res->start, resource_size(res));
+	g2d->regs = devm_request_and_ioremap(&pdev->dev, res);
 	if (!g2d->regs) {
 		dev_err(dev, "failed to remap I/O memory\n");
 		ret = -ENXIO;
-		goto err_release_res;
+		goto err_put_clk;
 	}
 
 	g2d->irq = platform_get_irq(pdev, 0);
 	if (g2d->irq < 0) {
 		dev_err(dev, "failed to get irq\n");
 		ret = g2d->irq;
-		goto err_unmap_base;
+		goto err_put_clk;
 	}
 
-	ret = request_irq(g2d->irq, g2d_irq_handler, 0, "drm_g2d", g2d);
+	ret = devm_request_irq(&pdev->dev, g2d->irq, g2d_irq_handler, 0,
+								"drm_g2d", g2d);
 	if (ret < 0) {
 		dev_err(dev, "irq request failed\n");
-		goto err_unmap_base;
+		goto err_put_clk;
 	}
 
 	platform_set_drvdata(pdev, g2d);
@@ -838,7 +823,7 @@ static int __devinit g2d_probe(struct platform_device *pdev)
 	ret = exynos_drm_subdrv_register(subdrv);
 	if (ret < 0) {
 		dev_err(dev, "failed to register drm g2d device\n");
-		goto err_free_irq;
+		goto err_put_clk;
 	}
 
 	dev_info(dev, "The exynos g2d(ver %d.%d) successfully probed\n",
@@ -846,13 +831,6 @@ static int __devinit g2d_probe(struct platform_device *pdev)
 
 	return 0;
 
-err_free_irq:
-	free_irq(g2d->irq, g2d);
-err_unmap_base:
-	iounmap(g2d->regs);
-err_release_res:
-	release_resource(g2d->regs_res);
-	kfree(g2d->regs_res);
 err_put_clk:
 	pm_runtime_disable(dev);
 	clk_put(g2d->gate_clk);
@@ -862,8 +840,6 @@ err_destroy_workqueue:
 	destroy_workqueue(g2d->g2d_workq);
 err_destroy_slab:
 	kmem_cache_destroy(g2d->runqueue_slab);
-err_free_mem:
-	kfree(g2d);
 	return ret;
 }
 
@@ -873,24 +849,18 @@ static int __devexit g2d_remove(struct platform_device *pdev)
 
 	cancel_work_sync(&g2d->runqueue_work);
 	exynos_drm_subdrv_unregister(&g2d->subdrv);
-	free_irq(g2d->irq, g2d);
 
 	while (g2d->runqueue_node) {
 		g2d_free_runqueue_node(g2d, g2d->runqueue_node);
 		g2d->runqueue_node = g2d_get_runqueue_node(g2d);
 	}
 
-	iounmap(g2d->regs);
-	release_resource(g2d->regs_res);
-	kfree(g2d->regs_res);
-
 	pm_runtime_disable(&pdev->dev);
 	clk_put(g2d->gate_clk);
 
 	g2d_fini_cmdlist(g2d);
 	destroy_workqueue(g2d->g2d_workq);
 	kmem_cache_destroy(g2d->runqueue_slab);
-	kfree(g2d);
 
 	return 0;
 }
@@ -924,7 +894,7 @@ static int g2d_resume(struct device *dev)
 }
 #endif
 
-SIMPLE_DEV_PM_OPS(g2d_pm_ops, g2d_suspend, g2d_resume);
+static SIMPLE_DEV_PM_OPS(g2d_pm_ops, g2d_suspend, g2d_resume);
 
 struct platform_driver g2d_driver = {
 	.probe		= g2d_probe,

drivers/gpu/drm/exynos/exynos_drm_gem.c

@@ -122,7 +122,7 @@ fail:
 		__free_page(pages[i]);
 
 	drm_free_large(pages);
-	return ERR_PTR(PTR_ERR(p));
+	return ERR_CAST(p);
 }
 
 static void exynos_gem_put_pages(struct drm_gem_object *obj,
@@ -662,7 +662,7 @@ int exynos_drm_gem_dumb_create(struct drm_file *file_priv,
 	 */
 
 	args->pitch = args->width * ((args->bpp + 7) / 8);
-	args->size = PAGE_ALIGN(args->pitch * args->height);
+	args->size = args->pitch * args->height;
 
 	exynos_gem_obj = exynos_drm_gem_create(dev, args->flags, args->size);
 	if (IS_ERR(exynos_gem_obj))

drivers/gpu/drm/exynos/exynos_drm_hdmi.c

@@ -345,7 +345,7 @@ static int __devinit exynos_drm_hdmi_probe(struct platform_device *pdev)
 
 	DRM_DEBUG_KMS("%s\n", __FILE__);
 
-	ctx = kzalloc(sizeof(*ctx), GFP_KERNEL);
+	ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL);
 	if (!ctx) {
 		DRM_LOG_KMS("failed to alloc common hdmi context.\n");
 		return -ENOMEM;
@@ -371,7 +371,6 @@ static int __devexit exynos_drm_hdmi_remove(struct platform_device *pdev)
 	DRM_DEBUG_KMS("%s\n", __FILE__);
 
 	exynos_drm_subdrv_unregister(&ctx->subdrv);
-	kfree(ctx);
 
 	return 0;
 }

drivers/gpu/drm/exynos/exynos_drm_plane.c

@@ -29,7 +29,6 @@ static const uint32_t formats[] = {
 	DRM_FORMAT_XRGB8888,
 	DRM_FORMAT_ARGB8888,
 	DRM_FORMAT_NV12,
-	DRM_FORMAT_NV12M,
 	DRM_FORMAT_NV12MT,
 };
 

drivers/gpu/drm/exynos/exynos_drm_vidi.c

@@ -633,7 +633,7 @@ static int __devinit vidi_probe(struct platform_device *pdev)
 
 	DRM_DEBUG_KMS("%s\n", __FILE__);
 
-	ctx = kzalloc(sizeof(*ctx), GFP_KERNEL);
+	ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL);
 	if (!ctx)
 		return -ENOMEM;
 
@@ -673,8 +673,6 @@ static int __devexit vidi_remove(struct platform_device *pdev)
 		ctx->raw_edid = NULL;
 	}
 
-	kfree(ctx);
-
 	return 0;
 }
 

drivers/gpu/drm/exynos/exynos_hdmi.c

@@ -2172,7 +2172,7 @@ static int __devinit hdmi_resources_init(struct hdmi_context *hdata)
 
 	DRM_DEBUG_KMS("HDMI resource init\n");
 
-	memset(res, 0, sizeof *res);
+	memset(res, 0, sizeof(*res));
 
 	/* get clocks, power */
 	res->hdmi = clk_get(dev, "hdmi");
@@ -2204,7 +2204,7 @@ static int __devinit hdmi_resources_init(struct hdmi_context *hdata)
 	clk_set_parent(res->sclk_hdmi, res->sclk_pixel);
 
 	res->regul_bulk = kzalloc(ARRAY_SIZE(supply) *
-		sizeof res->regul_bulk[0], GFP_KERNEL);
+		sizeof(res->regul_bulk[0]), GFP_KERNEL);
 	if (!res->regul_bulk) {
 		DRM_ERROR("failed to get memory for regulators\n");
 		goto fail;
@@ -2243,7 +2243,7 @@ static int hdmi_resources_cleanup(struct hdmi_context *hdata)
 		clk_put(res->sclk_hdmi);
 	if (!IS_ERR_OR_NULL(res->hdmi))
 		clk_put(res->hdmi);
-	memset(res, 0, sizeof *res);
+	memset(res, 0, sizeof(*res));
 
 	return 0;
 }
@@ -2312,11 +2312,6 @@ static int __devinit hdmi_probe(struct platform_device *pdev)
 	}
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res) {
-		DRM_ERROR("failed to find registers\n");
-		ret = -ENOENT;
-		goto err_resource;
-	}
 
 	hdata->regs = devm_request_and_ioremap(&pdev->dev, res);
 	if (!hdata->regs) {

drivers/gpu/drm/exynos/exynos_mixer.c

@@ -236,11 +236,11 @@ static inline void vp_filter_set(struct mixer_resources *res,
 static void vp_default_filter(struct mixer_resources *res)
 {
 	vp_filter_set(res, VP_POLY8_Y0_LL,
-		filter_y_horiz_tap8, sizeof filter_y_horiz_tap8);
+		filter_y_horiz_tap8, sizeof(filter_y_horiz_tap8));
 	vp_filter_set(res, VP_POLY4_Y0_LL,
-		filter_y_vert_tap4, sizeof filter_y_vert_tap4);
+		filter_y_vert_tap4, sizeof(filter_y_vert_tap4));
 	vp_filter_set(res, VP_POLY4_C0_LL,
-		filter_cr_horiz_tap4, sizeof filter_cr_horiz_tap4);
+		filter_cr_horiz_tap4, sizeof(filter_cr_horiz_tap4));
 }
 
 static void mixer_vsync_set_update(struct mixer_context *ctx, bool enable)

drivers/gpu/drm/gma500/oaktrail_device.c

@@ -476,6 +476,7 @@ static const struct psb_offset oaktrail_regmap[2] = {
 		.pos = DSPAPOS,
 		.surf = DSPASURF,
 		.addr = MRST_DSPABASE,
+		.base = MRST_DSPABASE,
 		.status = PIPEASTAT,
 		.linoff = DSPALINOFF,
 		.tileoff = DSPATILEOFF,
@@ -499,6 +500,7 @@ static const struct psb_offset oaktrail_regmap[2] = {
 		.pos = DSPBPOS,
 		.surf = DSPBSURF,
 		.addr = DSPBBASE,
+		.base = DSPBBASE,
 		.status = PIPEBSTAT,
 		.linoff = DSPBLINOFF,
 		.tileoff = DSPBTILEOFF,

drivers/gpu/drm/i810/i810_dma.c

@@ -115,6 +115,9 @@ static const struct file_operations i810_buffer_fops = {
 	.unlocked_ioctl = drm_ioctl,
 	.mmap = i810_mmap_buffers,
 	.fasync = drm_fasync,
+#ifdef CONFIG_COMPAT
+	.compat_ioctl = drm_compat_ioctl,
+#endif
 	.llseek = noop_llseek,
 };
 

drivers/gpu/drm/i810/i810_drv.c

@@ -51,6 +51,9 @@ static const struct file_operations i810_driver_fops = {
 	.mmap = drm_mmap,
 	.poll = drm_poll,
 	.fasync = drm_fasync,
+#ifdef CONFIG_COMPAT
+	.compat_ioctl = drm_compat_ioctl,
+#endif
 	.llseek = noop_llseek,
 };
 

drivers/gpu/drm/i915/i915_dma.c

@@ -1587,6 +1587,7 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags)
 	spin_lock_init(&dev_priv->irq_lock);
 	spin_lock_init(&dev_priv->error_lock);
 	spin_lock_init(&dev_priv->rps_lock);
+	spin_lock_init(&dev_priv->dpio_lock);
 
 	if (IS_IVYBRIDGE(dev) || IS_HASWELL(dev))
 		dev_priv->num_pipe = 3;

drivers/gpu/drm/i915/i915_irq.c

@@ -2700,9 +2700,6 @@ void intel_irq_init(struct drm_device *dev)
 			dev->driver->irq_handler = i8xx_irq_handler;
 			dev->driver->irq_uninstall = i8xx_irq_uninstall;
 		} else if (INTEL_INFO(dev)->gen == 3) {
-			/* IIR "flip pending" means done if this bit is set */
-			I915_WRITE(ECOSKPD, _MASKED_BIT_DISABLE(ECO_FLIP_DONE));
-
 			dev->driver->irq_preinstall = i915_irq_preinstall;
 			dev->driver->irq_postinstall = i915_irq_postinstall;
 			dev->driver->irq_uninstall = i915_irq_uninstall;

drivers/gpu/drm/i915/intel_display.c

@@ -1376,7 +1376,8 @@ static void assert_pch_dp_disabled(struct drm_i915_private *dev_priv,
 	     "PCH DP (0x%08x) enabled on transcoder %c, should be disabled\n",
 	     reg, pipe_name(pipe));
 
-	WARN(HAS_PCH_IBX(dev_priv->dev) && (val & SDVO_PIPE_B_SELECT),
+	WARN(HAS_PCH_IBX(dev_priv->dev) && (val & DP_PORT_EN) == 0
+	     && (val & DP_PIPEB_SELECT),
 	     "IBX PCH dp port still using transcoder B\n");
 }
 
@@ -1388,7 +1389,8 @@ static void assert_pch_hdmi_disabled(struct drm_i915_private *dev_priv,
 	     "PCH HDMI (0x%08x) enabled on transcoder %c, should be disabled\n",
 	     reg, pipe_name(pipe));
 
-	WARN(HAS_PCH_IBX(dev_priv->dev) && (val & SDVO_PIPE_B_SELECT),
+	WARN(HAS_PCH_IBX(dev_priv->dev) && (val & PORT_ENABLE) == 0
+	     && (val & SDVO_PIPE_B_SELECT),
 	     "IBX PCH hdmi port still using transcoder B\n");
 }
 

drivers/gpu/drm/i915/intel_dp.c

@@ -2533,14 +2533,10 @@ intel_dp_init(struct drm_device *dev, int output_reg)
 			break;
 	}
 
-	intel_dp_i2c_init(intel_dp, intel_connector, name);
-
 	/* Cache some DPCD data in the eDP case */
 	if (is_edp(intel_dp)) {
-		bool ret;
 		struct edp_power_seq	cur, vbt;
 		u32 pp_on, pp_off, pp_div;
-		struct edid *edid;
 
 		pp_on = I915_READ(PCH_PP_ON_DELAYS);
 		pp_off = I915_READ(PCH_PP_OFF_DELAYS);
@@ -2591,6 +2587,13 @@ intel_dp_init(struct drm_device *dev, int output_reg)
 
 		DRM_DEBUG_KMS("backlight on delay %d, off delay %d\n",
 			      intel_dp->backlight_on_delay, intel_dp->backlight_off_delay);
+	}
+
+	intel_dp_i2c_init(intel_dp, intel_connector, name);
+
+	if (is_edp(intel_dp)) {
+		bool ret;
+		struct edid *edid;
 
 		ironlake_edp_panel_vdd_on(intel_dp);
 		ret = intel_dp_get_dpcd(intel_dp);

drivers/gpu/drm/i915/intel_panel.c

@@ -162,19 +162,12 @@ static u32 i915_read_blc_pwm_ctl(struct drm_i915_private *dev_priv)
 	return val;
 }
 
-u32 intel_panel_get_max_backlight(struct drm_device *dev)
+static u32 _intel_panel_get_max_backlight(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	u32 max;
 
 	max = i915_read_blc_pwm_ctl(dev_priv);
-	if (max == 0) {
-		/* XXX add code here to query mode clock or hardware clock
-		 * and program max PWM appropriately.
-		 */
-		pr_warn_once("fixme: max PWM is zero\n");
-		return 1;
-	}
 
 	if (HAS_PCH_SPLIT(dev)) {
 		max >>= 16;
@@ -188,6 +181,22 @@ u32 intel_panel_get_max_backlight(struct drm_device *dev)
 			max *= 0xff;
 	}
 
+	return max;
+}
+
+u32 intel_panel_get_max_backlight(struct drm_device *dev)
+{
+	u32 max;
+
+	max = _intel_panel_get_max_backlight(dev);
+	if (max == 0) {
+		/* XXX add code here to query mode clock or hardware clock
+		 * and program max PWM appropriately.
+		 */
+		pr_warn_once("fixme: max PWM is zero\n");
+		return 1;
+	}
+
 	DRM_DEBUG_DRIVER("max backlight PWM = %d\n", max);
 	return max;
 }
@@ -424,7 +433,11 @@ int intel_panel_setup_backlight(struct drm_device *dev)
 
 	memset(&props, 0, sizeof(props));
 	props.type = BACKLIGHT_RAW;
-	props.max_brightness = intel_panel_get_max_backlight(dev);
+	props.max_brightness = _intel_panel_get_max_backlight(dev);
+	if (props.max_brightness == 0) {
+		DRM_ERROR("Failed to get maximum backlight value\n");
+		return -ENODEV;
+	}
 	dev_priv->backlight =
 		backlight_device_register("intel_backlight",
 					  &connector->kdev, dev,

drivers/gpu/drm/i915/intel_pm.c

@@ -3672,6 +3672,9 @@ static void gen3_init_clock_gating(struct drm_device *dev)
 
 	if (IS_PINEVIEW(dev))
 		I915_WRITE(ECOSKPD, _MASKED_BIT_ENABLE(ECO_GATING_CX_ONLY));
+
+	/* IIR "flip pending" means done if this bit is set */
+	I915_WRITE(ECOSKPD, _MASKED_BIT_DISABLE(ECO_FLIP_DONE));
 }
 
 static void i85x_init_clock_gating(struct drm_device *dev)

drivers/gpu/drm/i915/intel_sdvo.c

@@ -2573,7 +2573,6 @@ bool intel_sdvo_init(struct drm_device *dev, uint32_t sdvo_reg, bool is_sdvob)
 		hotplug_mask = intel_sdvo->is_sdvob ?
 			SDVOB_HOTPLUG_INT_STATUS_I915 : SDVOC_HOTPLUG_INT_STATUS_I915;
 	}
-	dev_priv->hotplug_supported_mask |= hotplug_mask;
 
 	drm_encoder_helper_add(&intel_encoder->base, &intel_sdvo_helper_funcs);
 
@@ -2581,14 +2580,6 @@ bool intel_sdvo_init(struct drm_device *dev, uint32_t sdvo_reg, bool is_sdvob)
 	if (!intel_sdvo_get_capabilities(intel_sdvo, &intel_sdvo->caps))
 		goto err;
 
-	/* Set up hotplug command - note paranoia about contents of reply.
-	 * We assume that the hardware is in a sane state, and only touch
-	 * the bits we think we understand.
-	 */
-	intel_sdvo_get_value(intel_sdvo, SDVO_CMD_GET_ACTIVE_HOT_PLUG,
-			     &intel_sdvo->hotplug_active, 2);
-	intel_sdvo->hotplug_active[0] &= ~0x3;
-
 	if (intel_sdvo_output_setup(intel_sdvo,
 				    intel_sdvo->caps.output_flags) != true) {
 		DRM_DEBUG_KMS("SDVO output failed to setup on %s\n",
@@ -2596,6 +2587,12 @@ bool intel_sdvo_init(struct drm_device *dev, uint32_t sdvo_reg, bool is_sdvob)
 		goto err;
 	}
 
+	/* Only enable the hotplug irq if we need it, to work around noisy
+	 * hotplug lines.
+	 */
+	if (intel_sdvo->hotplug_active[0])
+		dev_priv->hotplug_supported_mask |= hotplug_mask;
+
 	intel_sdvo_select_ddc_bus(dev_priv, intel_sdvo, sdvo_reg);
 
 	/* Set the input timing to the screen. Assume always input 0. */

drivers/gpu/drm/mgag200/mgag200_drv.c

@@ -84,6 +84,9 @@ static const struct file_operations mgag200_driver_fops = {
 	.mmap = mgag200_mmap,
 	.poll = drm_poll,
 	.fasync = drm_fasync,
+#ifdef CONFIG_COMPAT
+	.compat_ioctl = drm_compat_ioctl,
+#endif
 	.read = drm_read,
 };
 

drivers/gpu/drm/nouveau/nouveau_display.c

@@ -598,7 +598,7 @@ nouveau_display_dumb_create(struct drm_file *file_priv, struct drm_device *dev,
 	args->size = args->pitch * args->height;
 	args->size = roundup(args->size, PAGE_SIZE);
 
-	ret = nouveau_gem_new(dev, args->size, 0, TTM_PL_FLAG_VRAM, 0, 0, &bo);
+	ret = nouveau_gem_new(dev, args->size, 0, NOUVEAU_GEM_DOMAIN_VRAM, 0, 0, &bo);
 	if (ret)
 		return ret;
 

drivers/gpu/drm/nouveau/nv50_gpio.c

@@ -115,6 +115,9 @@ nv50_gpio_init(struct drm_device *dev)
 {
 	struct drm_nouveau_private *dev_priv = dev->dev_private;
 
+	/* initialise gpios and routing to vbios defaults */
+	nouveau_gpio_reset(dev);
+
 	/* disable, and ack any pending gpio interrupts */
 	nv_wr32(dev, 0xe050, 0x00000000);
 	nv_wr32(dev, 0xe054, 0xffffffff);

drivers/gpu/drm/nouveau/nvd0_display.c

@@ -1510,10 +1510,10 @@ nvd0_sor_mode_set(struct drm_encoder *encoder, struct drm_display_mode *umode,
 	case OUTPUT_DP:
 		if (nv_connector->base.display_info.bpc == 6) {
 			nv_encoder->dp.datarate = mode->clock * 18 / 8;
-			syncs |= 0x00000140;
+			syncs |= 0x00000002 << 6;
 		} else {
 			nv_encoder->dp.datarate = mode->clock * 24 / 8;
-			syncs |= 0x00000180;
+			syncs |= 0x00000005 << 6;
 		}
 
 		if (nv_encoder->dcb->sorconf.link & 1)

drivers/gpu/drm/radeon/atombios_crtc.c

@@ -1479,14 +1479,98 @@ static void radeon_legacy_atom_fixup(struct drm_crtc *crtc)
 	}
 }
 
+/**
+ * radeon_get_pll_use_mask - look up a mask of which pplls are in use
+ *
+ * @crtc: drm crtc
+ *
+ * Returns the mask of which PPLLs (Pixel PLLs) are in use.
+ */
+static u32 radeon_get_pll_use_mask(struct drm_crtc *crtc)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_crtc *test_crtc;
+	struct radeon_crtc *radeon_test_crtc;
+	u32 pll_in_use = 0;
+
+	list_for_each_entry(test_crtc, &dev->mode_config.crtc_list, head) {
+		if (crtc == test_crtc)
+			continue;
+
+		radeon_test_crtc = to_radeon_crtc(test_crtc);
+		if (radeon_test_crtc->pll_id != ATOM_PPLL_INVALID)
+			pll_in_use |= (1 << radeon_test_crtc->pll_id);
+	}
+	return pll_in_use;
+}
+
+/**
+ * radeon_get_shared_dp_ppll - return the PPLL used by another crtc for DP
+ *
+ * @crtc: drm crtc
+ *
+ * Returns the PPLL (Pixel PLL) used by another crtc/encoder which is
+ * also in DP mode.  For DP, a single PPLL can be used for all DP
+ * crtcs/encoders.
+ */
+static int radeon_get_shared_dp_ppll(struct drm_crtc *crtc)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_encoder *test_encoder;
+	struct radeon_crtc *radeon_test_crtc;
+
+	list_for_each_entry(test_encoder, &dev->mode_config.encoder_list, head) {
+		if (test_encoder->crtc && (test_encoder->crtc != crtc)) {
+			if (ENCODER_MODE_IS_DP(atombios_get_encoder_mode(test_encoder))) {
+				/* for DP use the same PLL for all */
+				radeon_test_crtc = to_radeon_crtc(test_encoder->crtc);
+				if (radeon_test_crtc->pll_id != ATOM_PPLL_INVALID)
+					return radeon_test_crtc->pll_id;
+			}
+		}
+	}
+	return ATOM_PPLL_INVALID;
+}
+
+/**
+ * radeon_atom_pick_pll - Allocate a PPLL for use by the crtc.
+ *
+ * @crtc: drm crtc
+ *
+ * Returns the PPLL (Pixel PLL) to be used by the crtc.  For DP monitors
+ * a single PPLL can be used for all DP crtcs/encoders.  For non-DP
+ * monitors a dedicated PPLL must be used.  If a particular board has
+ * an external DP PLL, return ATOM_PPLL_INVALID to skip PLL programming
+ * as there is no need to program the PLL itself.  If we are not able to
+ * allocate a PLL, return ATOM_PPLL_INVALID to skip PLL programming to
+ * avoid messing up an existing monitor.
+ *
+ * Asic specific PLL information
+ *
+ * DCE 6.1
+ * - PPLL2 is only available to UNIPHYA (both DP and non-DP)
+ * - PPLL0, PPLL1 are available for UNIPHYB/C/D/E/F (both DP and non-DP)
+ *
+ * DCE 6.0
+ * - PPLL0 is available to all UNIPHY (DP only)
+ * - PPLL1, PPLL2 are available for all UNIPHY (both DP and non-DP) and DAC
+ *
+ * DCE 5.0
+ * - DCPLL is available to all UNIPHY (DP only)
+ * - PPLL1, PPLL2 are available for all UNIPHY (both DP and non-DP) and DAC
+ *
+ * DCE 3.0/4.0/4.1
+ * - PPLL1, PPLL2 are available for all UNIPHY (both DP and non-DP) and DAC
+ *
+ */
 static int radeon_atom_pick_pll(struct drm_crtc *crtc)
 {
 	struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
 	struct drm_device *dev = crtc->dev;
 	struct radeon_device *rdev = dev->dev_private;
 	struct drm_encoder *test_encoder;
-	struct drm_crtc *test_crtc;
-	uint32_t pll_in_use = 0;
+	u32 pll_in_use;
+	int pll;
 
 	if (ASIC_IS_DCE61(rdev)) {
 		list_for_each_entry(test_encoder, &dev->mode_config.encoder_list, head) {
@@ -1498,32 +1582,40 @@ static int radeon_atom_pick_pll(struct drm_crtc *crtc)
 
 				if ((test_radeon_encoder->encoder_id ==
 				     ENCODER_OBJECT_ID_INTERNAL_UNIPHY) &&
-				    (dig->linkb == false)) /* UNIPHY A uses PPLL2 */
+				    (dig->linkb == false))
+					/* UNIPHY A uses PPLL2 */
 					return ATOM_PPLL2;
+				else if (ENCODER_MODE_IS_DP(atombios_get_encoder_mode(test_encoder))) {
+					/* UNIPHY B/C/D/E/F */
+					if (rdev->clock.dp_extclk)
+						/* skip PPLL programming if using ext clock */
+						return ATOM_PPLL_INVALID;
+					else {
+						/* use the same PPLL for all DP monitors */
+						pll = radeon_get_shared_dp_ppll(crtc);
+						if (pll != ATOM_PPLL_INVALID)
+							return pll;
+					}
+				}
+				break;
 			}
 		}
 		/* UNIPHY B/C/D/E/F */
-		list_for_each_entry(test_crtc, &dev->mode_config.crtc_list, head) {
-			struct radeon_crtc *radeon_test_crtc;
-
-			if (crtc == test_crtc)
-				continue;
-
-			radeon_test_crtc = to_radeon_crtc(test_crtc);
-			if ((radeon_test_crtc->pll_id == ATOM_PPLL0) ||
-			    (radeon_test_crtc->pll_id == ATOM_PPLL1))
-				pll_in_use |= (1 << radeon_test_crtc->pll_id);
-		}
-		if (!(pll_in_use & 4))
+		pll_in_use = radeon_get_pll_use_mask(crtc);
+		if (!(pll_in_use & (1 << ATOM_PPLL0)))
 			return ATOM_PPLL0;
-		return ATOM_PPLL1;
+		if (!(pll_in_use & (1 << ATOM_PPLL1)))
+			return ATOM_PPLL1;
+		DRM_ERROR("unable to allocate a PPLL\n");
+		return ATOM_PPLL_INVALID;
 	} else if (ASIC_IS_DCE4(rdev)) {
 		list_for_each_entry(test_encoder, &dev->mode_config.encoder_list, head) {
 			if (test_encoder->crtc && (test_encoder->crtc == crtc)) {
 				/* in DP mode, the DP ref clock can come from PPLL, DCPLL, or ext clock,
 				 * depending on the asic:
 				 * DCE4: PPLL or ext clock
-				 * DCE5: DCPLL or ext clock
+				 * DCE5: PPLL, DCPLL, or ext clock
+				 * DCE6: PPLL, PPLL0, or ext clock
 				 *
 				 * Setting ATOM_PPLL_INVALID will cause SetPixelClock to skip
 				 * PPLL/DCPLL programming and only program the DP DTO for the
@@ -1531,31 +1623,34 @@ static int radeon_atom_pick_pll(struct drm_crtc *crtc)
 				 */
 				if (ENCODER_MODE_IS_DP(atombios_get_encoder_mode(test_encoder))) {
 					if (rdev->clock.dp_extclk)
+						/* skip PPLL programming if using ext clock */
 						return ATOM_PPLL_INVALID;
 					else if (ASIC_IS_DCE6(rdev))
+						/* use PPLL0 for all DP */
 						return ATOM_PPLL0;
 					else if (ASIC_IS_DCE5(rdev))
+						/* use DCPLL for all DP */
 						return ATOM_DCPLL;
+					else {
+						/* use the same PPLL for all DP monitors */
+						pll = radeon_get_shared_dp_ppll(crtc);
+						if (pll != ATOM_PPLL_INVALID)
+							return pll;
+					}
 				}
+				break;
 			}
 		}
-
-		/* otherwise, pick one of the plls */
-		list_for_each_entry(test_crtc, &dev->mode_config.crtc_list, head) {
-			struct radeon_crtc *radeon_test_crtc;
-
-			if (crtc == test_crtc)
-				continue;
-
-			radeon_test_crtc = to_radeon_crtc(test_crtc);
-			if ((radeon_test_crtc->pll_id >= ATOM_PPLL1) &&
-			    (radeon_test_crtc->pll_id <= ATOM_PPLL2))
-				pll_in_use |= (1 << radeon_test_crtc->pll_id);
-		}
-		if (!(pll_in_use & 1))
+		/* all other cases */
+		pll_in_use = radeon_get_pll_use_mask(crtc);
+		if (!(pll_in_use & (1 << ATOM_PPLL2)))
+			return ATOM_PPLL2;
+		if (!(pll_in_use & (1 << ATOM_PPLL1)))
 			return ATOM_PPLL1;
-		return ATOM_PPLL2;
+		DRM_ERROR("unable to allocate a PPLL\n");
+		return ATOM_PPLL_INVALID;
 	} else
+		/* use PPLL1 or PPLL2 */
 		return radeon_crtc->crtc_id;
 
 }
@@ -1697,7 +1792,7 @@ static void atombios_crtc_disable(struct drm_crtc *crtc)
 		break;
 	}
 done:
-	radeon_crtc->pll_id = -1;
+	radeon_crtc->pll_id = ATOM_PPLL_INVALID;
 }
 
 static const struct drm_crtc_helper_funcs atombios_helper_funcs = {
@@ -1746,6 +1841,6 @@ void radeon_atombios_init_crtc(struct drm_device *dev,
 		else
 			radeon_crtc->crtc_offset = 0;
 	}
-	radeon_crtc->pll_id = -1;
+	radeon_crtc->pll_id = ATOM_PPLL_INVALID;
 	drm_crtc_helper_add(&radeon_crtc->base, &atombios_helper_funcs);
 }

drivers/gpu/drm/radeon/radeon_fence.c

@@ -131,7 +131,7 @@ int radeon_fence_emit(struct radeon_device *rdev,
  */
 void radeon_fence_process(struct radeon_device *rdev, int ring)
 {
-	uint64_t seq, last_seq;
+	uint64_t seq, last_seq, last_emitted;
 	unsigned count_loop = 0;
 	bool wake = false;
 
@@ -158,13 +158,15 @@ void radeon_fence_process(struct radeon_device *rdev, int ring)
 	 */
 	last_seq = atomic64_read(&rdev->fence_drv[ring].last_seq);
 	do {
+		last_emitted = rdev->fence_drv[ring].sync_seq[ring];
 		seq = radeon_fence_read(rdev, ring);
 		seq |= last_seq & 0xffffffff00000000LL;
 		if (seq < last_seq) {
-			seq += 0x100000000LL;
+			seq &= 0xffffffff;
+			seq |= last_emitted & 0xffffffff00000000LL;
 		}
 
-		if (seq == last_seq) {
+		if (seq <= last_seq || seq > last_emitted) {
 			break;
 		}
 		/* If we loop over we don't want to return without

drivers/gpu/drm/savage/savage_drv.c

@@ -43,6 +43,9 @@ static const struct file_operations savage_driver_fops = {
 	.mmap = drm_mmap,
 	.poll = drm_poll,
 	.fasync = drm_fasync,
+#ifdef CONFIG_COMPAT
+	.compat_ioctl = drm_compat_ioctl,
+#endif
 	.llseek = noop_llseek,
 };
 

drivers/gpu/drm/sis/sis_drv.c

@@ -74,6 +74,9 @@ static const struct file_operations sis_driver_fops = {
 	.mmap = drm_mmap,
 	.poll = drm_poll,
 	.fasync = drm_fasync,
+#ifdef CONFIG_COMPAT
+	.compat_ioctl = drm_compat_ioctl,
+#endif
 	.llseek = noop_llseek,
 };
 

drivers/gpu/drm/tdfx/tdfx_drv.c

@@ -49,6 +49,9 @@ static const struct file_operations tdfx_driver_fops = {
 	.mmap = drm_mmap,
 	.poll = drm_poll,
 	.fasync = drm_fasync,
+#ifdef CONFIG_COMPAT
+	.compat_ioctl = drm_compat_ioctl,
+#endif
 	.llseek = noop_llseek,
 };
 

drivers/gpu/drm/udl/udl_drv.c

@@ -66,6 +66,9 @@ static const struct file_operations udl_driver_fops = {
 	.unlocked_ioctl	= drm_ioctl,
 	.release = drm_release,
 	.fasync = drm_fasync,
+#ifdef CONFIG_COMPAT
+	.compat_ioctl = drm_compat_ioctl,
+#endif
 	.llseek = noop_llseek,
 };
 

drivers/gpu/drm/via/via_drv.c

@@ -65,6 +65,9 @@ static const struct file_operations via_driver_fops = {
 	.mmap = drm_mmap,
 	.poll = drm_poll,
 	.fasync = drm_fasync,
+#ifdef CONFIG_COMPAT
+	.compat_ioctl = drm_compat_ioctl,
+#endif
 	.llseek = noop_llseek,
 };
 

drivers/gpu/drm/vmwgfx/Kconfig

@@ -12,3 +12,11 @@ config DRM_VMWGFX
 	  This is a KMS enabled DRM driver for the VMware SVGA2
 	  virtual hardware.
 	  The compiled module will be called "vmwgfx.ko".
+
+config DRM_VMWGFX_FBCON
+	depends on DRM_VMWGFX
+	bool "Enable framebuffer console under vmwgfx by default"
+	help
+	   Choose this option if you are shipping a new vmwgfx
+	   userspace driver that supports using the kernel driver.
+

drivers/gpu/drm/vmwgfx/vmwgfx_drv.c

@@ -182,8 +182,9 @@ static struct pci_device_id vmw_pci_id_list[] = {
 	{0x15ad, 0x0405, PCI_ANY_ID, PCI_ANY_ID, 0, 0, VMWGFX_CHIP_SVGAII},
 	{0, 0, 0}
 };
+MODULE_DEVICE_TABLE(pci, vmw_pci_id_list);
 
-static int enable_fbdev;
+static int enable_fbdev = IS_ENABLED(CONFIG_DRM_VMWGFX_FBCON);
 
 static int vmw_probe(struct pci_dev *, const struct pci_device_id *);
 static void vmw_master_init(struct vmw_master *);
@@ -1154,6 +1155,11 @@ static struct drm_driver driver = {
 	.open = vmw_driver_open,
 	.preclose = vmw_preclose,
 	.postclose = vmw_postclose,
+
+	.dumb_create = vmw_dumb_create,
+	.dumb_map_offset = vmw_dumb_map_offset,
+	.dumb_destroy = vmw_dumb_destroy,
+
 	.fops = &vmwgfx_driver_fops,
 	.name = VMWGFX_DRIVER_NAME,
 	.desc = VMWGFX_DRIVER_DESC,

drivers/gpu/drm/vmwgfx/vmwgfx_drv.h

@@ -645,6 +645,16 @@ int vmw_kms_readback(struct vmw_private *dev_priv,
 int vmw_kms_update_layout_ioctl(struct drm_device *dev, void *data,
 				struct drm_file *file_priv);
 
+int vmw_dumb_create(struct drm_file *file_priv,
+		    struct drm_device *dev,
+		    struct drm_mode_create_dumb *args);
+
+int vmw_dumb_map_offset(struct drm_file *file_priv,
+			struct drm_device *dev, uint32_t handle,
+			uint64_t *offset);
+int vmw_dumb_destroy(struct drm_file *file_priv,
+		     struct drm_device *dev,
+		     uint32_t handle);
 /**
  * Overlay control - vmwgfx_overlay.c
  */

drivers/gpu/drm/vmwgfx/vmwgfx_resource.c

@@ -1917,3 +1917,76 @@ err_ref:
 	vmw_resource_unreference(&res);
 	return ret;
 }
+
+
+int vmw_dumb_create(struct drm_file *file_priv,
+		    struct drm_device *dev,
+		    struct drm_mode_create_dumb *args)
+{
+	struct vmw_private *dev_priv = vmw_priv(dev);
+	struct vmw_master *vmaster = vmw_master(file_priv->master);
+	struct vmw_user_dma_buffer *vmw_user_bo;
+	struct ttm_buffer_object *tmp;
+	int ret;
+
+	args->pitch = args->width * ((args->bpp + 7) / 8);
+	args->size = args->pitch * args->height;
+
+	vmw_user_bo = kzalloc(sizeof(*vmw_user_bo), GFP_KERNEL);
+	if (vmw_user_bo == NULL)
+		return -ENOMEM;
+
+	ret = ttm_read_lock(&vmaster->lock, true);
+	if (ret != 0) {
+		kfree(vmw_user_bo);
+		return ret;
+	}
+
+	ret = vmw_dmabuf_init(dev_priv, &vmw_user_bo->dma, args->size,
+			      &vmw_vram_sys_placement, true,
+			      &vmw_user_dmabuf_destroy);
+	if (ret != 0)
+		goto out_no_dmabuf;
+
+	tmp = ttm_bo_reference(&vmw_user_bo->dma.base);
+	ret = ttm_base_object_init(vmw_fpriv(file_priv)->tfile,
+				   &vmw_user_bo->base,
+				   false,
+				   ttm_buffer_type,
+				   &vmw_user_dmabuf_release, NULL);
+	if (unlikely(ret != 0))
+		goto out_no_base_object;
+
+	args->handle = vmw_user_bo->base.hash.key;
+
+out_no_base_object:
+	ttm_bo_unref(&tmp);
+out_no_dmabuf:
+	ttm_read_unlock(&vmaster->lock);
+	return ret;
+}
+
+int vmw_dumb_map_offset(struct drm_file *file_priv,
+			struct drm_device *dev, uint32_t handle,
+			uint64_t *offset)
+{
+	struct ttm_object_file *tfile = vmw_fpriv(file_priv)->tfile;
+	struct vmw_dma_buffer *out_buf;
+	int ret;
+
+	ret = vmw_user_dmabuf_lookup(tfile, handle, &out_buf);
+	if (ret != 0)
+		return -EINVAL;
+
+	*offset = out_buf->base.addr_space_offset;
+	vmw_dmabuf_unreference(&out_buf);
+	return 0;
+}
+
+int vmw_dumb_destroy(struct drm_file *file_priv,
+		     struct drm_device *dev,
+		     uint32_t handle)
+{
+	return ttm_ref_object_base_unref(vmw_fpriv(file_priv)->tfile,
+					 handle, TTM_REF_USAGE);
+}

drivers/hwmon/ina2xx.c

@@ -69,22 +69,6 @@ struct ina2xx_data {
 	u16 regs[INA2XX_MAX_REGISTERS];
 };
 
-int ina2xx_read_word(struct i2c_client *client, int reg)
-{
-	int val = i2c_smbus_read_word_data(client, reg);
-	if (unlikely(val < 0)) {
-		dev_dbg(&client->dev,
-			"Failed to read register: %d\n", reg);
-		return val;
-	}
-	return be16_to_cpu(val);
-}
-
-void ina2xx_write_word(struct i2c_client *client, int reg, int data)
-{
-	i2c_smbus_write_word_data(client, reg, cpu_to_be16(data));
-}
-
 static struct ina2xx_data *ina2xx_update_device(struct device *dev)
 {
 	struct i2c_client *client = to_i2c_client(dev);
@@ -102,7 +86,7 @@ static struct ina2xx_data *ina2xx_update_device(struct device *dev)
 
 		/* Read all registers */
 		for (i = 0; i < data->registers; i++) {
-			int rv = ina2xx_read_word(client, i);
+			int rv = i2c_smbus_read_word_swapped(client, i);
 			if (rv < 0) {
 				ret = ERR_PTR(rv);
 				goto abort;
@@ -279,22 +263,26 @@ static int ina2xx_probe(struct i2c_client *client,
 	switch (data->kind) {
 	case ina219:
 		/* device configuration */
-		ina2xx_write_word(client, INA2XX_CONFIG, INA219_CONFIG_DEFAULT);
+		i2c_smbus_write_word_swapped(client, INA2XX_CONFIG,
+					     INA219_CONFIG_DEFAULT);
 
 		/* set current LSB to 1mA, shunt is in uOhms */
 		/* (equation 13 in datasheet) */
-		ina2xx_write_word(client, INA2XX_CALIBRATION, 40960000 / shunt);
+		i2c_smbus_write_word_swapped(client, INA2XX_CALIBRATION,
+					     40960000 / shunt);
 		dev_info(&client->dev,
 			 "power monitor INA219 (Rshunt = %li uOhm)\n", shunt);
 		data->registers = INA219_REGISTERS;
 		break;
 	case ina226:
 		/* device configuration */
-		ina2xx_write_word(client, INA2XX_CONFIG, INA226_CONFIG_DEFAULT);
+		i2c_smbus_write_word_swapped(client, INA2XX_CONFIG,
+					     INA226_CONFIG_DEFAULT);
 
 		/* set current LSB to 1mA, shunt is in uOhms */
 		/* (equation 1 in datasheet)*/
-		ina2xx_write_word(client, INA2XX_CALIBRATION, 5120000 / shunt);
+		i2c_smbus_write_word_swapped(client, INA2XX_CALIBRATION,
+					     5120000 / shunt);
 		dev_info(&client->dev,
 			 "power monitor INA226 (Rshunt = %li uOhm)\n", shunt);
 		data->registers = INA226_REGISTERS;

drivers/hwmon/twl4030-madc-hwmon.c

@@ -44,12 +44,13 @@ static ssize_t madc_read(struct device *dev,
 			 struct device_attribute *devattr, char *buf)
 {
 	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
-	struct twl4030_madc_request req;
+	struct twl4030_madc_request req = {
+		.channels = 1 << attr->index,
+		.method = TWL4030_MADC_SW2,
+		.type = TWL4030_MADC_WAIT,
+	};
 	long val;
 
-	req.channels = (1 << attr->index);
-	req.method = TWL4030_MADC_SW2;
-	req.func_cb = NULL;
 	val = twl4030_madc_conversion(&req);
 	if (val < 0)
 		return val;

drivers/i2c/algos/i2c-algo-pca.c

@@ -476,17 +476,17 @@ static int pca_init(struct i2c_adapter *adap)
 		/* To avoid integer overflow, use clock/100 for calculations */
 		clock = pca_clock(pca_data) / 100;
 
-		if (pca_data->i2c_clock > 10000) {
+		if (pca_data->i2c_clock > 1000000) {
 			mode = I2C_PCA_MODE_TURBO;
 			min_tlow = 14;
 			min_thi  = 5;
 			raise_fall_time = 22; /* Raise 11e-8s, Fall 11e-8s */
-		} else if (pca_data->i2c_clock > 4000) {
+		} else if (pca_data->i2c_clock > 400000) {
 			mode = I2C_PCA_MODE_FASTP;
 			min_tlow = 17;
 			min_thi  = 9;
 			raise_fall_time = 22; /* Raise 11e-8s, Fall 11e-8s */
-		} else if (pca_data->i2c_clock > 1000) {
+		} else if (pca_data->i2c_clock > 100000) {
 			mode = I2C_PCA_MODE_FAST;
 			min_tlow = 44;
 			min_thi  = 20;

drivers/i2c/busses/Kconfig

@@ -104,6 +104,7 @@ config I2C_I801
 	    DH89xxCC (PCH)
 	    Panther Point (PCH)
 	    Lynx Point (PCH)
+	    Lynx Point-LP (PCH)
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-i801.
@@ -354,9 +355,13 @@ config I2C_DAVINCI
 	  devices such as DaVinci NIC.
 	  For details please see http://www.ti.com/davinci
 
+config I2C_DESIGNWARE_CORE
+	tristate
+
 config I2C_DESIGNWARE_PLATFORM
 	tristate "Synopsys DesignWare Platform"
 	depends on HAVE_CLK
+	select I2C_DESIGNWARE_CORE
 	help
 	  If you say yes to this option, support will be included for the
 	  Synopsys DesignWare I2C adapter. Only master mode is supported.
@@ -367,6 +372,7 @@ config I2C_DESIGNWARE_PLATFORM
 config I2C_DESIGNWARE_PCI
 	tristate "Synopsys DesignWare PCI"
 	depends on PCI
+	select I2C_DESIGNWARE_CORE
 	help
 	  If you say yes to this option, support will be included for the
 	  Synopsys DesignWare I2C adapter. Only master mode is supported.