Input: remove obsolete setup parameters from input drivers

They have been marked as __obsolete_setup() for several years,
it is time for them to go.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

drivers/input/joystick/amijoy.c

@@ -50,8 +50,6 @@ static int amijoy[2] = { 0, 1 };
 module_param_array_named(map, amijoy, uint, NULL, 0);
 MODULE_PARM_DESC(map, "Map of attached joysticks in form of <a>,<b> (default is 0,1)");
 
-__obsolete_setup("amijoy=");
-
 static int amijoy_used;
 static DEFINE_MUTEX(amijoy_mutex);
 static struct input_dev *amijoy_dev[2];

drivers/input/joystick/analog.c

@@ -58,8 +58,6 @@ static int analog_options[ANALOG_PORTS];
 module_param_array_named(map, js, charp, &js_nargs, 0);
 MODULE_PARM_DESC(map, "Describes analog joysticks type/capabilities");
 
-__obsolete_setup("js=");
-
 /*
  * Times, feature definitions.
  */

drivers/input/joystick/db9.c

@@ -59,10 +59,6 @@ MODULE_PARM_DESC(dev2, "Describes second attached device (<parport#>,<type>)");
 module_param_array_named(dev3, db9[2].args, int, &db9[2].nargs, 0);
 MODULE_PARM_DESC(dev3, "Describes third attached device (<parport#>,<type>)");
 
-__obsolete_setup("db9=");
-__obsolete_setup("db9_2=");
-__obsolete_setup("db9_3=");
-
 #define DB9_ARG_PARPORT		0
 #define DB9_ARG_MODE		1
 

drivers/input/joystick/gamecon.c

@@ -60,10 +60,6 @@ MODULE_PARM_DESC(map2, "Describes second set of devices");
 module_param_array_named(map3, gc[2].args, int, &gc[2].nargs, 0);
 MODULE_PARM_DESC(map3, "Describes third set of devices");
 
-__obsolete_setup("gc=");
-__obsolete_setup("gc_2=");
-__obsolete_setup("gc_3=");
-
 /* see also gs_psx_delay parameter in PSX support section */
 
 #define GC_SNES		1
@@ -403,8 +399,6 @@ static int gc_psx_delay = GC_PSX_DELAY;
 module_param_named(psx_delay, gc_psx_delay, uint, 0);
 MODULE_PARM_DESC(psx_delay, "Delay when accessing Sony PSX controller (usecs)");
 
-__obsolete_setup("gc_psx_delay=");
-
 static short gc_psx_abs[] = { ABS_X, ABS_Y, ABS_RX, ABS_RY, ABS_HAT0X, ABS_HAT0Y };
 static short gc_psx_btn[] = { BTN_TL, BTN_TR, BTN_TL2, BTN_TR2, BTN_A, BTN_B, BTN_X, BTN_Y,
 				BTN_START, BTN_SELECT, BTN_THUMBL, BTN_THUMBR };

drivers/input/joystick/turbografx.c

@@ -60,10 +60,6 @@ MODULE_PARM_DESC(map2, "Describes second set of devices");
 module_param_array_named(map3, tgfx[2].args, int, &tgfx[2].nargs, 0);
 MODULE_PARM_DESC(map3, "Describes third set of devices");
 
-__obsolete_setup("tgfx=");
-__obsolete_setup("tgfx_2=");
-__obsolete_setup("tgfx_3=");
-
 #define TGFX_REFRESH_TIME	HZ/100	/* 10 ms */
 
 #define TGFX_TRIGGER		0x08

drivers/input/keyboard/atkbd.c

@@ -63,10 +63,6 @@ static int atkbd_extra;
 module_param_named(extra, atkbd_extra, bool, 0);
 MODULE_PARM_DESC(extra, "Enable extra LEDs and keys on IBM RapidAcces, EzKey and similar keyboards");
 
-__obsolete_setup("atkbd_set=");
-__obsolete_setup("atkbd_reset");
-__obsolete_setup("atkbd_softrepeat=");
-
 /*
  * Scancode to keycode tables. These are just the default setting, and
  * are loadable via an userland utility.

drivers/input/mouse/inport.c

@@ -84,8 +84,6 @@ static int inport_irq = INPORT_IRQ;
 module_param_named(irq, inport_irq, uint, 0);
 MODULE_PARM_DESC(irq, "IRQ number (5=default)");
 
-__obsolete_setup("inport_irq=");
-
 static struct input_dev *inport_dev;
 
 static irqreturn_t inport_interrupt(int irq, void *dev_id)

drivers/input/mouse/logibm.c

@@ -75,8 +75,6 @@ static int logibm_irq = LOGIBM_IRQ;
 module_param_named(irq, logibm_irq, uint, 0);
 MODULE_PARM_DESC(irq, "IRQ number (5=default)");
 
-__obsolete_setup("logibm_irq=");
-
 static struct input_dev *logibm_dev;
 
 static irqreturn_t logibm_interrupt(int irq, void *dev_id)

drivers/input/mouse/psmouse-base.c

@@ -93,12 +93,6 @@ static struct attribute_group psmouse_attribute_group = {
 	.attrs	= psmouse_attributes,
 };
 
-__obsolete_setup("psmouse_noext");
-__obsolete_setup("psmouse_resolution=");
-__obsolete_setup("psmouse_smartscroll=");
-__obsolete_setup("psmouse_resetafter=");
-__obsolete_setup("psmouse_rate=");
-
 /*
  * psmouse_mutex protects all operations changing state of mouse
  * (connecting, disconnecting, changing rate or resolution via

drivers/input/serio/i8042.c

@@ -76,13 +76,6 @@ module_param_named(debug, i8042_debug, bool, 0600);
 MODULE_PARM_DESC(debug, "Turn i8042 debugging mode on and off");
 #endif
 
-__obsolete_setup("i8042_noaux");
-__obsolete_setup("i8042_nomux");
-__obsolete_setup("i8042_unlock");
-__obsolete_setup("i8042_reset");
-__obsolete_setup("i8042_direct");
-__obsolete_setup("i8042_dumbkbd");
-
 #include "i8042.h"
 
 static DEFINE_SPINLOCK(i8042_lock);