[ARM] pxa: remove unnecessary #include of pxa-regs.h and hardware.h

pxa-regs.h and hardware.h are not intended for use directly in driver
code, remove those unnecessary references.

Signed-off-by: Eric Miao <eric.miao@marvell.com>

arch/arm/mach-pxa/cm-x2xx-pci.c

@@ -22,7 +22,6 @@
 #include <linux/gpio.h>
 
 #include <asm/mach/pci.h>
-#include <mach/pxa-regs.h>
 #include <asm/mach-types.h>
 
 #include <asm/hardware/it8152.h>

arch/arm/mach-pxa/himalaya.c

@@ -26,8 +26,6 @@
 
 #include <mach/mfp-pxa25x.h>
 #include <mach/hardware.h>
-#include <mach/pxa-regs.h>
-#include <mach/pxa2xx-regs.h>
 
 #include "generic.h"
 

arch/arm/mach-pxa/pwm.c

@@ -20,7 +20,6 @@
 #include <linux/pwm.h>
 
 #include <asm/div64.h>
-#include <mach/pxa-regs.h>
 
 /* PWM registers and bits definitions */
 #define PWMCR		(0x00)

arch/arm/mach-pxa/ssp.c

@@ -33,7 +33,6 @@
 #include <asm/irq.h>
 #include <mach/hardware.h>
 #include <mach/ssp.h>
-#include <mach/pxa-regs.h>
 #include <mach/regs-ssp.h>
 
 #define TIMEOUT 100000

drivers/input/keyboard/corgikbd.c

@@ -21,8 +21,6 @@
 #include <linux/slab.h>
 
 #include <mach/corgi.h>
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
 #include <mach/pxa2xx-gpio.h>
 #include <asm/hardware/scoop.h>
 

drivers/input/keyboard/spitzkbd.c

@@ -21,8 +21,6 @@
 #include <linux/slab.h>
 
 #include <mach/spitz.h>
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
 #include <mach/pxa2xx-gpio.h>
 
 #define KB_ROWS			7

drivers/net/smc911x.h

@@ -226,8 +226,7 @@ static inline void SMC_outsl(struct smc911x_local *lp, int reg,
  * Use a DMA for RX and TX packets.
  */
 #include <linux/dma-mapping.h>
-#include <asm/dma.h>
-#include <mach/pxa-regs.h>
+#include <mach/dma.h>
 
 static dma_addr_t rx_dmabuf, tx_dmabuf;
 static int rx_dmalen, tx_dmalen;

drivers/net/smc91x.h

@@ -494,8 +494,6 @@ struct smc_local {
  */
 #include <linux/dma-mapping.h>
 #include <mach/dma.h>
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
 
 #ifdef SMC_insl
 #undef SMC_insl

drivers/pcmcia/pxa2xx_base.c

@@ -28,7 +28,6 @@
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/system.h>
-#include <mach/pxa-regs.h>
 #include <mach/pxa2xx-regs.h>
 #include <asm/mach-types.h>
 

drivers/pcmcia/pxa2xx_cm_x255.c

@@ -16,7 +16,6 @@
 #include <linux/gpio.h>
 
 #include <asm/mach-types.h>
-#include <mach/pxa-regs.h>
 
 #include "soc_common.h"
 

drivers/pcmcia/pxa2xx_cm_x270.c

@@ -16,7 +16,6 @@
 #include <linux/gpio.h>
 
 #include <asm/mach-types.h>
-#include <mach/pxa-regs.h>
 
 #include "soc_common.h"
 

drivers/pcmcia/pxa2xx_e740.c

@@ -16,8 +16,6 @@
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
 
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
 #include <mach/eseries-gpio.h>
 
 #include <asm/irq.h>

drivers/pcmcia/pxa2xx_lubbock.c

@@ -24,7 +24,6 @@
 #include <mach/hardware.h>
 #include <asm/hardware/sa1111.h>
 #include <asm/mach-types.h>
-#include <mach/pxa-regs.h>
 #include <mach/lubbock.h>
 
 #include "sa1111_generic.h"

drivers/pcmcia/pxa2xx_viper.c

@@ -26,7 +26,6 @@
 
 #include <asm/irq.h>
 
-#include <mach/pxa-regs.h>
 #include <mach/viper.h>
 #include <asm/mach-types.h>
 

drivers/video/pxafb.c

@@ -59,7 +59,6 @@
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/div64.h>
-#include <mach/pxa-regs.h>
 #include <mach/bitfield.h>
 #include <mach/pxafb.h>
 

sound/arm/pxa2xx-ac97-lib.c

@@ -21,7 +21,6 @@
 #include <sound/pxa2xx-lib.h>
 
 #include <asm/irq.h>
-#include <mach/hardware.h>
 #include <mach/regs-ac97.h>
 #include <mach/pxa2xx-gpio.h>
 #include <mach/audio.h>

sound/arm/pxa2xx-ac97.c

@@ -20,8 +20,6 @@
 #include <sound/initval.h>
 #include <sound/pxa2xx-lib.h>
 
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
 #include <mach/regs-ac97.h>
 #include <mach/audio.h>
 

sound/arm/pxa2xx-pcm-lib.c

@@ -12,8 +12,7 @@
 #include <sound/pcm_params.h>
 #include <sound/pxa2xx-lib.h>
 
-#include <asm/dma.h>
-#include <mach/pxa-regs.h>
+#include <mach/dma.h>
 
 #include "pxa2xx-pcm.h"
 

sound/soc/pxa/corgi.c

@@ -25,8 +25,6 @@
 #include <sound/soc-dapm.h>
 
 #include <asm/mach-types.h>
-#include <mach/pxa-regs.h>
-#include <mach/hardware.h>
 #include <mach/corgi.h>
 #include <mach/audio.h>
 

sound/soc/pxa/e800_wm9712.c

@@ -21,8 +21,6 @@
 #include <sound/soc-dapm.h>
 
 #include <asm/mach-types.h>
-#include <mach/pxa-regs.h>
-#include <mach/hardware.h>
 #include <mach/audio.h>
 
 #include "../codecs/wm9712.h"

sound/soc/pxa/em-x270.c

@@ -29,8 +29,6 @@
 #include <sound/soc-dapm.h>
 
 #include <asm/mach-types.h>
-#include <mach/pxa-regs.h>
-#include <mach/hardware.h>
 #include <mach/audio.h>
 
 #include "../codecs/wm9712.h"

sound/soc/pxa/poodle.c

@@ -26,8 +26,6 @@
 
 #include <asm/mach-types.h>
 #include <asm/hardware/locomo.h>
-#include <mach/pxa-regs.h>
-#include <mach/hardware.h>
 #include <mach/poodle.h>
 #include <mach/audio.h>
 

sound/soc/pxa/spitz.c

@@ -26,8 +26,6 @@
 #include <sound/soc-dapm.h>
 
 #include <asm/mach-types.h>
-#include <mach/pxa-regs.h>
-#include <mach/hardware.h>
 #include <mach/spitz.h>
 #include "../codecs/wm8750.h"
 #include "pxa2xx-pcm.h"

sound/soc/pxa/tosa.c

@@ -30,8 +30,6 @@
 
 #include <asm/mach-types.h>
 #include <mach/tosa.h>
-#include <mach/pxa-regs.h>
-#include <mach/hardware.h>
 #include <mach/audio.h>
 
 #include "../codecs/wm9712.h"