Merge tag 'usb-for-v3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

Felipe writes:

usb: patches for v3.13

Final conversions to configfs for mass storage, acm_ms, and
multi gadgets.

MUSB should now work out of the box on AM335x-based boards
(beagle bone white and black) with DMA thanks to Sebastian's
work.

We can now enable VERBOSE_DEBUG on builds of drivers/usb/gadget/
by selecting CONFIG_USB_GADGET_VERBOSE.

s3c-hsotg got quite a few non-critical fixes but also learned
a few new tricks (isochronous transfers, multi count support).

The Marvel USB3 Controller driver got a memory leak fix.

devm_usb_get_phy() learned not to return NULL, ever.

Other than these patches, we have the usual set of cleanups
ranging from removal of unnecessary *_set_drvdata() to using
SIMPLE_DEV_PM_OPS.

Signed-of-by: Felipe Balbi <balbi@ti.com>

Documentation/ABI/testing/configfs-usb-gadget-mass-storage

@@ -0,0 +1,31 @@
+What:		/config/usb-gadget/gadget/functions/mass_storage.name
+Date:		Oct 2013
+KenelVersion:	3.13
+Description:
+		The attributes:
+
+		stall		- Set to permit function to halt bulk endpoints.
+				Disabled on some USB devices known not to work
+				correctly. You should set it to true.
+		num_buffers	- Number of pipeline buffers. Valid numbers
+				are 2..4. Available only if
+				CONFIG_USB_GADGET_DEBUG_FILES is set.
+
+What:		/config/usb-gadget/gadget/functions/mass_storage.name/lun.name
+Date:		Oct 2013
+KenelVersion:	3.13
+Description:
+		The attributes:
+
+		file		- The path to the backing file for the LUN.
+				Required if LUN is not marked as removable.
+		ro		- Flag specifying access to the LUN shall be
+				read-only. This is implied if CD-ROM emulation
+				is enabled as well as when it was impossible
+				to open "filename" in R/W mode.
+		removable	- Flag specifying that LUN shall be indicated as
+				being removable.
+		cdrom		- Flag specifying that LUN shall be reported as
+				being a CD-ROM.
+		nofua		- Flag specifying that FUA flag
+				in SCSI WRITE(10,12)

Documentation/devicetree/bindings/usb/usb-nop-xceiv.txt

@@ -15,7 +15,7 @@ Optional properties:
 
 - vcc-supply: phandle to the regulator that provides RESET to the PHY.
 
-- reset-supply: phandle to the regulator that provides power to the PHY.
+- reset-gpios: Should specify the GPIO for reset.
 
 Example:
 
@@ -25,10 +25,9 @@ Example:
 		clocks = <&osc 0>;
 		clock-names = "main_clk";
 		vcc-supply = <&hsusb1_vcc_regulator>;
-		reset-supply = <&hsusb1_reset_regulator>;
+		reset-gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
 	};
 
 hsusb1_phy is a NOP USB PHY device that gets its clock from an oscillator
 and expects that clock to be configured to 19.2MHz by the NOP PHY driver.
-hsusb1_vcc_regulator provides power to the PHY and hsusb1_reset_regulator
-controls RESET.
+hsusb1_vcc_regulator provides power to the PHY and GPIO 7 controls RESET.

arch/arm/mach-omap2/board-omap3beagle.c

@@ -289,18 +289,12 @@ static struct regulator_consumer_supply beagle_vsim_supply[] = {
 
 static struct gpio_led gpio_leds[];
 
-/* PHY's VCC regulator might be added later, so flag that we need it */
-static struct usb_phy_gen_xceiv_platform_data hsusb2_phy_data = {
-	.needs_vcc = true,
-};
-
 static struct usbhs_phy_data phy_data[] = {
 	{
 		.port = 2,
 		.reset_gpio = 147,
 		.vcc_gpio = -1,		/* updated in beagle_twl_gpio_setup */
 		.vcc_polarity = 1,	/* updated in beagle_twl_gpio_setup */
-		.platform_data = &hsusb2_phy_data,
 	},
 };
 

arch/arm/mach-omap2/usb-host.c

@@ -435,6 +435,7 @@ int usbhs_init_phys(struct usbhs_phy_data *phy, int num_phys)
 	struct platform_device *pdev;
 	char *phy_id;
 	struct platform_device_info pdevinfo;
+	struct usb_phy_gen_xceiv_platform_data nop_pdata;
 
 	for (i = 0; i < num_phys; i++) {
 
@@ -455,11 +456,18 @@ int usbhs_init_phys(struct usbhs_phy_data *phy, int num_phys)
 			return -ENOMEM;
 		}
 
+		/* set platform data */
+		memset(&nop_pdata, 0, sizeof(nop_pdata));
+		if (gpio_is_valid(phy->vcc_gpio))
+			nop_pdata.needs_vcc = true;
+		nop_pdata.gpio_reset = phy->reset_gpio;
+		nop_pdata.type = USB_PHY_TYPE_USB2;
+
 		/* create a NOP PHY device */
 		memset(&pdevinfo, 0, sizeof(pdevinfo));
 		pdevinfo.name = nop_name;
 		pdevinfo.id = phy->port;
-		pdevinfo.data = phy->platform_data;
+		pdevinfo.data = &nop_pdata;
 		pdevinfo.size_data =
 			sizeof(struct usb_phy_gen_xceiv_platform_data);
 		scnprintf(phy_id, MAX_STR, "usb_phy_gen_xceiv.%d",
@@ -474,14 +482,6 @@ int usbhs_init_phys(struct usbhs_phy_data *phy, int num_phys)
 
 		usb_bind_phy("ehci-omap.0", phy->port - 1, phy_id);
 
-		/* Do we need RESET regulator ? */
-		if (gpio_is_valid(phy->reset_gpio)) {
-			scnprintf(rail_name, MAX_STR,
-					"hsusb%d_reset", phy->port);
-			usbhs_add_regulator(rail_name, phy_id, "reset",
-						phy->reset_gpio, 1);
-		}
-
 		/* Do we need VCC regulator ? */
 		if (gpio_is_valid(phy->vcc_gpio)) {
 			scnprintf(rail_name, MAX_STR, "hsusb%d_vcc", phy->port);

arch/arm/mach-omap2/usb.h

@@ -58,7 +58,6 @@ struct usbhs_phy_data {
 	int reset_gpio;
 	int vcc_gpio;
 	bool vcc_polarity;	/* 1 active high, 0 active low */
-	void *platform_data;
 };
 
 extern void usb_musb_init(struct omap_musb_board_data *board_data);

drivers/phy/phy-twl4030-usb.c

@@ -724,6 +724,8 @@ static int twl4030_usb_probe(struct platform_device *pdev)
 	if (device_create_file(&pdev->dev, &dev_attr_vbus))
 		dev_warn(&pdev->dev, "could not create sysfs file\n");
 
+	ATOMIC_INIT_NOTIFIER_HEAD(&twl->phy.notifier);
+
 	/* Our job is to use irqs and status from the power module
 	 * to keep the transceiver disabled when nothing's connected.
 	 *

drivers/usb/dwc3/core.c

@@ -584,7 +584,7 @@ static int dwc3_remove(struct platform_device *pdev)
 	usb_phy_set_suspend(dwc->usb2_phy, 1);
 	usb_phy_set_suspend(dwc->usb3_phy, 1);
 
-	pm_runtime_put(&pdev->dev);
+	pm_runtime_put_sync(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
 
 	dwc3_debugfs_exit(dwc);
@@ -691,7 +691,6 @@ static int dwc3_resume(struct device *dev)
 
 	usb_phy_init(dwc->usb3_phy);
 	usb_phy_init(dwc->usb2_phy);
-	msleep(100);
 
 	spin_lock_irqsave(&dwc->lock, flags);
 

drivers/usb/gadget/Kconfig

@@ -58,6 +58,20 @@ config USB_GADGET_DEBUG
 	   trying to track down.  Never enable these messages for a
 	   production build.
 
+config USB_GADGET_VERBOSE
+	bool "Verbose debugging Messages (DEVELOPMENT)"
+	depends on USB_GADGET_DEBUG
+	help
+	   Many controller and gadget drivers will print verbose debugging
+	   messages if you use this option to ask for those messages.
+
+	   Avoid enabling these messages, even if you're actively
+	   debugging such a driver.  Many drivers will emit so many
+	   messages that the driver timings are affected, which will
+	   either create new failure modes or remove the one you're
+	   trying to track down.  Never enable these messages for a
+	   production build.
+
 config USB_GADGET_DEBUG_FILES
 	boolean "Debugging information files (DEVELOPMENT)"
 	depends on PROC_FS
@@ -525,6 +539,9 @@ config USB_F_SUBSET
 config USB_F_RNDIS
 	tristate
 
+config USB_F_MASS_STORAGE
+	tristate
+
 choice
 	tristate "USB Gadget Drivers"
 	default USB_ETH
@@ -662,6 +679,16 @@ config USB_CONFIGFS_PHONET
 	help
 	  The Phonet protocol implementation for USB device.
 
+config USB_CONFIGFS_MASS_STORAGE
+	boolean "Mass storage"
+	depends on USB_CONFIGFS
+	select USB_F_MASS_STORAGE
+	help
+	  The Mass Storage Gadget acts as a USB Mass Storage disk drive.
+	  As its storage repository it can use a regular file or a block
+	  device (in much the same way as the "loop" device driver),
+	  specified as a module parameter or sysfs option.
+
 config USB_ZERO
 	tristate "Gadget Zero (DEVELOPMENT)"
 	select USB_LIBCOMPOSITE
@@ -878,6 +905,7 @@ config USB_MASS_STORAGE
 	tristate "Mass Storage Gadget"
 	depends on BLOCK
 	select USB_LIBCOMPOSITE
+	select USB_F_MASS_STORAGE
 	help
 	  The Mass Storage Gadget acts as a USB Mass Storage disk drive.
 	  As its storage repository it can use a regular file or a block
@@ -1001,6 +1029,7 @@ config USB_G_ACM_MS
 	select USB_LIBCOMPOSITE
 	select USB_U_SERIAL
 	select USB_F_ACM
+	select USB_F_MASS_STORAGE
 	help
 	  This driver provides two functions in one configuration:
 	  a mass storage, and a CDC ACM (serial port) link.
@@ -1015,8 +1044,8 @@ config USB_G_MULTI
 	select USB_LIBCOMPOSITE
 	select USB_U_SERIAL
 	select USB_U_ETHER
-	select USB_U_RNDIS
 	select USB_F_ACM
+	select USB_F_MASS_STORAGE
 	help
 	  The Multifunction Composite Gadget provides Ethernet (RNDIS
 	  and/or CDC Ethernet), mass storage and ACM serial link
@@ -1035,6 +1064,8 @@ config USB_G_MULTI
 config USB_G_MULTI_RNDIS
 	bool "RNDIS + CDC Serial + Storage configuration"
 	depends on USB_G_MULTI
+	select USB_U_RNDIS
+	select USB_F_RNDIS
 	default y
 	help
 	  This option enables a configuration with RNDIS, CDC Serial and
@@ -1048,6 +1079,7 @@ config USB_G_MULTI_CDC
 	bool "CDC Ethernet + CDC Serial + Storage configuration"
 	depends on USB_G_MULTI
 	default n
+	select USB_F_ECM
 	help
 	  This option enables a configuration with CDC Ethernet (ECM), CDC
 	  Serial and Mass Storage functions available in the Multifunction

drivers/usb/gadget/Makefile

@@ -1,7 +1,8 @@
 #
 # USB peripheral controller drivers
 #
-ccflags-$(CONFIG_USB_GADGET_DEBUG) := -DDEBUG
+ccflags-$(CONFIG_USB_GADGET_DEBUG)	:= -DDEBUG
+ccflags-$(CONFIG_USB_GADGET_VERBOSE)	+= -DVERBOSE_DEBUG
 
 obj-$(CONFIG_USB_GADGET)	+= udc-core.o
 obj-$(CONFIG_USB_LIBCOMPOSITE)	+= libcomposite.o
@@ -60,6 +61,8 @@ usb_f_ecm_subset-y		:= f_subset.o
 obj-$(CONFIG_USB_F_SUBSET)	+= usb_f_ecm_subset.o
 usb_f_rndis-y			:= f_rndis.o
 obj-$(CONFIG_USB_F_RNDIS)	+= usb_f_rndis.o
+usb_f_mass_storage-y		:= f_mass_storage.o storage_common.o
+obj-$(CONFIG_USB_F_MASS_STORAGE)+= usb_f_mass_storage.o
 
 #
 # USB gadget drivers

drivers/usb/gadget/acm_ms.c

@@ -31,16 +31,7 @@
 #define ACM_MS_VENDOR_NUM	0x1d6b	/* Linux Foundation */
 #define ACM_MS_PRODUCT_NUM	0x0106	/* Composite Gadget: ACM + MS*/
 
-/*-------------------------------------------------------------------------*/
-
-/*
- * Kbuild is not very cooperative with respect to linking separately
- * compiled library objects into one module.  So for now we won't use
- * separate compilation ... ensuring init/exit sections work to shrink
- * the runtime footprint, and giving us at least some parts of what
- * a "gcc --combine ... part1.c part2.c part3.c ... " build would.
- */
-#include "f_mass_storage.c"
+#include "f_mass_storage.h"
 
 /*-------------------------------------------------------------------------*/
 USB_GADGET_COMPOSITE_OPTIONS();
@@ -104,18 +95,35 @@ static struct usb_gadget_strings *dev_strings[] = {
 /****************************** Configurations ******************************/
 
 static struct fsg_module_parameters fsg_mod_data = { .stall = 1 };
-FSG_MODULE_PARAMETERS(/* no prefix */, fsg_mod_data);
+#ifdef CONFIG_USB_GADGET_DEBUG_FILES
 
-static struct fsg_common fsg_common;
+static unsigned int fsg_num_buffers = CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS;
+
+#else
+
+/*
+ * Number of buffers we will use.
+ * 2 is usually enough for good buffering pipeline
+ */
+#define fsg_num_buffers	CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS
+
+#endif /* CONFIG_USB_DEBUG */
+
+FSG_MODULE_PARAMETERS(/* no prefix */, fsg_mod_data);
 
 /*-------------------------------------------------------------------------*/
 static struct usb_function *f_acm;
 static struct usb_function_instance *f_acm_inst;
+
+static struct usb_function_instance *fi_msg;
+static struct usb_function *f_msg;
+
 /*
  * We _always_ have both ACM and mass storage functions.
  */
 static int __init acm_ms_do_config(struct usb_configuration *c)
 {
+	struct fsg_opts *opts;
 	int	status;
 
 	if (gadget_is_otg(c->cdev->gadget)) {
@@ -123,31 +131,37 @@ static int __init acm_ms_do_config(struct usb_configuration *c)
 		c->bmAttributes |= USB_CONFIG_ATT_WAKEUP;
 	}
 
-	f_acm_inst = usb_get_function_instance("acm");
-	if (IS_ERR(f_acm_inst))
-		return PTR_ERR(f_acm_inst);
+	opts = fsg_opts_from_func_inst(fi_msg);
 
 	f_acm = usb_get_function(f_acm_inst);
-	if (IS_ERR(f_acm)) {
-		status = PTR_ERR(f_acm);
-		goto err_func;
+	if (IS_ERR(f_acm))
+		return PTR_ERR(f_acm);
+
+	f_msg = usb_get_function(fi_msg);
+	if (IS_ERR(f_msg)) {
+		status = PTR_ERR(f_msg);
+		goto put_acm;
 	}
 
 	status = usb_add_function(c, f_acm);
 	if (status < 0)
-		goto err_conf;
+		goto put_msg;
 
-	status = fsg_bind_config(c->cdev, c, &fsg_common);
-	if (status < 0)
-		goto err_fsg;
+	status = fsg_common_run_thread(opts->common);
+	if (status)
+		goto remove_acm;
+
+	status = usb_add_function(c, f_msg);
+	if (status)
+		goto remove_acm;
 
 	return 0;
-err_fsg:
+remove_acm:
 	usb_remove_function(c, f_acm);
-err_conf:
+put_msg:
+	usb_put_function(f_msg);
+put_acm:
 	usb_put_function(f_acm);
-err_func:
-	usb_put_function_instance(f_acm_inst);
 	return status;
 }
 
@@ -163,45 +177,82 @@ static struct usb_configuration acm_ms_config_driver = {
 static int __init acm_ms_bind(struct usb_composite_dev *cdev)
 {
 	struct usb_gadget	*gadget = cdev->gadget;
+	struct fsg_opts		*opts;
+	struct fsg_config	config;
 	int			status;
-	void			*retp;
 
-	/* set up mass storage function */
-	retp = fsg_common_from_params(&fsg_common, cdev, &fsg_mod_data);
-	if (IS_ERR(retp)) {
-		status = PTR_ERR(retp);
-		return PTR_ERR(retp);
+	f_acm_inst = usb_get_function_instance("acm");
+	if (IS_ERR(f_acm_inst))
+		return PTR_ERR(f_acm_inst);
+
+	fi_msg = usb_get_function_instance("mass_storage");
+	if (IS_ERR(fi_msg)) {
+		status = PTR_ERR(fi_msg);
+		goto fail_get_msg;
 	}
 
+	/* set up mass storage function */
+	fsg_config_from_params(&config, &fsg_mod_data, fsg_num_buffers);
+	opts = fsg_opts_from_func_inst(fi_msg);
+
+	opts->no_configfs = true;
+	status = fsg_common_set_num_buffers(opts->common, fsg_num_buffers);
+	if (status)
+		goto fail;
+
+	status = fsg_common_set_nluns(opts->common, config.nluns);
+	if (status)
+		goto fail_set_nluns;
+
+	status = fsg_common_set_cdev(opts->common, cdev, config.can_stall);
+	if (status)
+		goto fail_set_cdev;
+
+	fsg_common_set_sysfs(opts->common, true);
+	status = fsg_common_create_luns(opts->common, &config);
+	if (status)
+		goto fail_set_cdev;
+
+	fsg_common_set_inquiry_string(opts->common, config.vendor_name,
+				      config.product_name);
 	/*
 	 * Allocate string descriptor numbers ... note that string
 	 * contents can be overridden by the composite_dev glue.
 	 */
 	status = usb_string_ids_tab(cdev, strings_dev);
 	if (status < 0)
-		goto fail1;
+		goto fail_string_ids;
 	device_desc.iManufacturer = strings_dev[USB_GADGET_MANUFACTURER_IDX].id;
 	device_desc.iProduct = strings_dev[USB_GADGET_PRODUCT_IDX].id;
 
 	/* register our configuration */
 	status = usb_add_config(cdev, &acm_ms_config_driver, acm_ms_do_config);
 	if (status < 0)
-		goto fail1;
+		goto fail_string_ids;
 
 	usb_composite_overwrite_options(cdev, &coverwrite);
 	dev_info(&gadget->dev, "%s, version: " DRIVER_VERSION "\n",
 			DRIVER_DESC);
-	fsg_common_put(&fsg_common);
 	return 0;
 
 	/* error recovery */
-fail1:
-	fsg_common_put(&fsg_common);
+fail_string_ids:
+	fsg_common_remove_luns(opts->common);
+fail_set_cdev:
+	fsg_common_free_luns(opts->common);
+fail_set_nluns:
+	fsg_common_free_buffers(opts->common);
+fail:
+	usb_put_function_instance(fi_msg);
+fail_get_msg:
+	usb_put_function_instance(f_acm_inst);
 	return status;
 }
 
 static int __exit acm_ms_unbind(struct usb_composite_dev *cdev)
 {
+	usb_put_function(f_msg);
+	usb_put_function_instance(fi_msg);
 	usb_put_function(f_acm);
 	usb_put_function_instance(f_acm_inst);
 	return 0;

drivers/usb/gadget/configfs.c

@@ -557,7 +557,7 @@ static struct config_group *function_make(
 
 	fi = usb_get_function_instance(func_name);
 	if (IS_ERR(fi))
-		return ERR_PTR(PTR_ERR(fi));
+		return ERR_CAST(fi);
 
 	ret = config_item_set_name(&fi->group.cg_item, name);
 	if (ret) {
@@ -991,6 +991,14 @@ static struct configfs_subsystem gadget_subsys = {
 	.su_mutex = __MUTEX_INITIALIZER(gadget_subsys.su_mutex),
 };
 
+void unregister_gadget_item(struct config_item *item)
+{
+	struct gadget_info *gi = to_gadget_info(item);
+
+	unregister_gadget(gi);
+}
+EXPORT_SYMBOL(unregister_gadget_item);
+
 static int __init gadget_cfs_init(void)
 {
 	int ret;

drivers/usb/gadget/configfs.h

@@ -0,0 +1,6 @@
+#ifndef USB__GADGET__CONFIGFS__H
+#define USB__GADGET__CONFIGFS__H
+
+void unregister_gadget_item(struct config_item *item);
+
+#endif /*  USB__GADGET__CONFIGFS__H */

drivers/usb/gadget/f_mass_storage.h

@@ -0,0 +1,166 @@
+#ifndef USB_F_MASS_STORAGE_H
+#define USB_F_MASS_STORAGE_H
+
+#include <linux/usb/composite.h>
+#include "storage_common.h"
+
+struct fsg_module_parameters {
+	char		*file[FSG_MAX_LUNS];
+	bool		ro[FSG_MAX_LUNS];
+	bool		removable[FSG_MAX_LUNS];
+	bool		cdrom[FSG_MAX_LUNS];
+	bool		nofua[FSG_MAX_LUNS];
+
+	unsigned int	file_count, ro_count, removable_count, cdrom_count;
+	unsigned int	nofua_count;
+	unsigned int	luns;	/* nluns */
+	bool		stall;	/* can_stall */
+};
+
+#define _FSG_MODULE_PARAM_ARRAY(prefix, params, name, type, desc)	\
+	module_param_array_named(prefix ## name, params.name, type,	\
+				 &prefix ## params.name ## _count,	\
+				 S_IRUGO);				\
+	MODULE_PARM_DESC(prefix ## name, desc)
+
+#define _FSG_MODULE_PARAM(prefix, params, name, type, desc)		\
+	module_param_named(prefix ## name, params.name, type,		\
+			   S_IRUGO);					\
+	MODULE_PARM_DESC(prefix ## name, desc)
+
+#define __FSG_MODULE_PARAMETERS(prefix, params)				\
+	_FSG_MODULE_PARAM_ARRAY(prefix, params, file, charp,		\
+				"names of backing files or devices");	\
+	_FSG_MODULE_PARAM_ARRAY(prefix, params, ro, bool,		\
+				"true to force read-only");		\
+	_FSG_MODULE_PARAM_ARRAY(prefix, params, removable, bool,	\
+				"true to simulate removable media");	\
+	_FSG_MODULE_PARAM_ARRAY(prefix, params, cdrom, bool,		\
+				"true to simulate CD-ROM instead of disk"); \
+	_FSG_MODULE_PARAM_ARRAY(prefix, params, nofua, bool,		\
+				"true to ignore SCSI WRITE(10,12) FUA bit"); \
+	_FSG_MODULE_PARAM(prefix, params, luns, uint,			\
+			  "number of LUNs");				\
+	_FSG_MODULE_PARAM(prefix, params, stall, bool,			\
+			  "false to prevent bulk stalls")
+
+#ifdef CONFIG_USB_GADGET_DEBUG_FILES
+
+#define FSG_MODULE_PARAMETERS(prefix, params)				\
+	__FSG_MODULE_PARAMETERS(prefix, params);			\
+	module_param_named(num_buffers, fsg_num_buffers, uint, S_IRUGO);\
+	MODULE_PARM_DESC(num_buffers, "Number of pipeline buffers")
+#else
+
+#define FSG_MODULE_PARAMETERS(prefix, params)				\
+	__FSG_MODULE_PARAMETERS(prefix, params)
+
+#endif
+
+struct fsg_common;
+
+/* FSF callback functions */
+struct fsg_operations {
+	/*
+	 * Callback function to call when thread exits.  If no
+	 * callback is set or it returns value lower then zero MSF
+	 * will force eject all LUNs it operates on (including those
+	 * marked as non-removable or with prevent_medium_removal flag
+	 * set).
+	 */
+	int (*thread_exits)(struct fsg_common *common);
+};
+
+struct fsg_lun_opts {
+	struct config_group group;
+	struct fsg_lun *lun;
+	int lun_id;
+};
+
+struct fsg_opts {
+	struct fsg_common *common;
+	struct usb_function_instance func_inst;
+	struct fsg_lun_opts lun0;
+	struct config_group *default_groups[2];
+	bool no_configfs; /* for legacy gadgets */
+
+	/*
+	 * Read/write access to configfs attributes is handled by configfs.
+	 *
+	 * This is to protect the data from concurrent access by read/write
+	 * and create symlink/remove symlink.
+	 */
+	struct mutex			lock;
+	int				refcnt;
+};
+
+struct fsg_lun_config {
+	const char *filename;
+	char ro;
+	char removable;
+	char cdrom;
+	char nofua;
+};
+
+struct fsg_config {
+	unsigned nluns;
+	struct fsg_lun_config luns[FSG_MAX_LUNS];
+
+	/* Callback functions. */
+	const struct fsg_operations	*ops;
+	/* Gadget's private data. */
+	void			*private_data;
+
+	const char *vendor_name;		/*  8 characters or less */
+	const char *product_name;		/* 16 characters or less */
+
+	char			can_stall;
+	unsigned int		fsg_num_buffers;
+};
+
+static inline struct fsg_opts *
+fsg_opts_from_func_inst(const struct usb_function_instance *fi)
+{
+	return container_of(fi, struct fsg_opts, func_inst);
+}
+
+void fsg_common_get(struct fsg_common *common);
+
+void fsg_common_put(struct fsg_common *common);
+
+void fsg_common_set_sysfs(struct fsg_common *common, bool sysfs);
+
+int fsg_common_set_num_buffers(struct fsg_common *common, unsigned int n);
+
+void fsg_common_free_buffers(struct fsg_common *common);
+
+int fsg_common_set_cdev(struct fsg_common *common,
+			struct usb_composite_dev *cdev, bool can_stall);
+
+void fsg_common_remove_lun(struct fsg_lun *lun, bool sysfs);
+
+void fsg_common_remove_luns(struct fsg_common *common);
+
+void fsg_common_free_luns(struct fsg_common *common);
+
+int fsg_common_set_nluns(struct fsg_common *common, int nluns);
+
+void fsg_common_set_ops(struct fsg_common *common,
+			const struct fsg_operations *ops);
+
+int fsg_common_create_lun(struct fsg_common *common, struct fsg_lun_config *cfg,
+			  unsigned int id, const char *name,
+			  const char **name_pfx);
+
+int fsg_common_create_luns(struct fsg_common *common, struct fsg_config *cfg);
+
+void fsg_common_set_inquiry_string(struct fsg_common *common, const char *vn,
+				   const char *pn);
+
+int fsg_common_run_thread(struct fsg_common *common);
+
+void fsg_config_from_params(struct fsg_config *cfg,
+			    const struct fsg_module_parameters *params,
+			    unsigned int fsg_num_buffers);
+
+#endif /* USB_F_MASS_STORAGE_H */

drivers/usb/gadget/mass_storage.c

@@ -37,16 +37,16 @@
 #define DRIVER_DESC		"Mass Storage Gadget"
 #define DRIVER_VERSION		"2009/09/11"
 
-/*-------------------------------------------------------------------------*/
-
 /*
- * kbuild is not very cooperative with respect to linking separately
- * compiled library objects into one module.  So for now we won't use
- * separate compilation ... ensuring init/exit sections work to shrink
- * the runtime footprint, and giving us at least some parts of what
- * a "gcc --combine ... part1.c part2.c part3.c ... " build would.
+ * Thanks to NetChip Technologies for donating this product ID.
+ *
+ * DO NOT REUSE THESE IDs with any other driver!!  Ever!!
+ * Instead:  allocate your own, using normal USB-IF procedures.
  */
-#include "f_mass_storage.c"
+#define FSG_VENDOR_ID	0x0525	/* NetChip */
+#define FSG_PRODUCT_ID	0xa4a5	/* Linux-USB File-backed Storage Gadget */
+
+#include "f_mass_storage.h"
 
 /*-------------------------------------------------------------------------*/
 USB_GADGET_COMPOSITE_OPTIONS();
@@ -97,11 +97,28 @@ static struct usb_gadget_strings *dev_strings[] = {
 	NULL,
 };
 
+static struct usb_function_instance *fi_msg;
+static struct usb_function *f_msg;
+
 /****************************** Configurations ******************************/
 
 static struct fsg_module_parameters mod_data = {
 	.stall = 1
 };
+#ifdef CONFIG_USB_GADGET_DEBUG_FILES
+
+static unsigned int fsg_num_buffers = CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS;
+
+#else
+
+/*
+ * Number of buffers we will use.
+ * 2 is usually enough for good buffering pipeline
+ */
+#define fsg_num_buffers	CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS
+
+#endif /* CONFIG_USB_GADGET_DEBUG_FILES */
+
 FSG_MODULE_PARAMETERS(/* no prefix */, mod_data);
 
 static unsigned long msg_registered;
@@ -115,13 +132,7 @@ static int msg_thread_exits(struct fsg_common *common)
 
 static int __init msg_do_config(struct usb_configuration *c)
 {
-	static const struct fsg_operations ops = {
-		.thread_exits = msg_thread_exits,
-	};
-	static struct fsg_common common;
-
-	struct fsg_common *retp;
-	struct fsg_config config;
+	struct fsg_opts *opts;
 	int ret;
 
 	if (gadget_is_otg(c->cdev->gadget)) {
@@ -129,15 +140,24 @@ static int __init msg_do_config(struct usb_configuration *c)
 		c->bmAttributes |= USB_CONFIG_ATT_WAKEUP;
 	}
 
-	fsg_config_from_params(&config, &mod_data);
-	config.ops = &ops;
+	opts = fsg_opts_from_func_inst(fi_msg);
+
+	f_msg = usb_get_function(fi_msg);
+	if (IS_ERR(f_msg))
+		return PTR_ERR(f_msg);
+
+	ret = fsg_common_run_thread(opts->common);
+	if (ret)
+		goto put_func;
+
+	ret = usb_add_function(c, f_msg);
+	if (ret)
+		goto put_func;
 
-	retp = fsg_common_init(&common, c->cdev, &config);
-	if (IS_ERR(retp))
-		return PTR_ERR(retp);
+	return 0;
 
-	ret = fsg_bind_config(c->cdev, c, &common);
-	fsg_common_put(&common);
+put_func:
+	usb_put_function(f_msg);
 	return ret;
 }
 
@@ -152,23 +172,79 @@ static struct usb_configuration msg_config_driver = {
 
 static int __init msg_bind(struct usb_composite_dev *cdev)
 {
+	static const struct fsg_operations ops = {
+		.thread_exits = msg_thread_exits,
+	};
+	struct fsg_opts *opts;
+	struct fsg_config config;
 	int status;
 
+	fi_msg = usb_get_function_instance("mass_storage");
+	if (IS_ERR(fi_msg))
+		return PTR_ERR(fi_msg);
+
+	fsg_config_from_params(&config, &mod_data, fsg_num_buffers);
+	opts = fsg_opts_from_func_inst(fi_msg);
+
+	opts->no_configfs = true;
+	status = fsg_common_set_num_buffers(opts->common, fsg_num_buffers);
+	if (status)
+		goto fail;
+
+	status = fsg_common_set_nluns(opts->common, config.nluns);
+	if (status)
+		goto fail_set_nluns;
+
+	fsg_common_set_ops(opts->common, &ops);
+
+	status = fsg_common_set_cdev(opts->common, cdev, config.can_stall);
+	if (status)
+		goto fail_set_cdev;
+
+	fsg_common_set_sysfs(opts->common, true);
+	status = fsg_common_create_luns(opts->common, &config);
+	if (status)
+		goto fail_set_cdev;
+
+	fsg_common_set_inquiry_string(opts->common, config.vendor_name,
+				      config.product_name);
+
 	status = usb_string_ids_tab(cdev, strings_dev);
 	if (status < 0)
-		return status;
+		goto fail_string_ids;
 	msg_device_desc.iProduct = strings_dev[USB_GADGET_PRODUCT_IDX].id;
 
 	status = usb_add_config(cdev, &msg_config_driver, msg_do_config);
 	if (status < 0)
-		return status;
+		goto fail_string_ids;
+
 	usb_composite_overwrite_options(cdev, &coverwrite);
 	dev_info(&cdev->gadget->dev,
 		 DRIVER_DESC ", version: " DRIVER_VERSION "\n");
 	set_bit(0, &msg_registered);
 	return 0;
+
+fail_string_ids:
+	fsg_common_remove_luns(opts->common);
+fail_set_cdev:
+	fsg_common_free_luns(opts->common);
+fail_set_nluns:
+	fsg_common_free_buffers(opts->common);
+fail:
+	usb_put_function_instance(fi_msg);
+	return status;
 }
 
+static int msg_unbind(struct usb_composite_dev *cdev)
+{
+	if (!IS_ERR(f_msg))
+		usb_put_function(f_msg);
+
+	if (!IS_ERR(fi_msg))
+		usb_put_function_instance(fi_msg);
+
+	return 0;
+}
 
 /****************************** Some noise ******************************/
 
@@ -179,6 +255,7 @@ static __refdata struct usb_composite_driver msg_driver = {
 	.needs_serial	= 1,
 	.strings	= dev_strings,
 	.bind		= msg_bind,
+	.unbind		= msg_unbind,
 };
 
 MODULE_DESCRIPTION(DRIVER_DESC);

drivers/usb/gadget/multi.c

@@ -15,6 +15,7 @@
 
 #include <linux/kernel.h>
 #include <linux/module.h>
+#include <linux/netdevice.h>
 
 #include "u_serial.h"
 #if defined USB_ETH_RNDIS
@@ -32,22 +33,11 @@ MODULE_AUTHOR("Michal Nazarewicz");
 MODULE_LICENSE("GPL");
 
 
-/***************************** All the files... *****************************/
+#include "f_mass_storage.h"
 
-/*
- * kbuild is not very cooperative with respect to linking separately
- * compiled library objects into one module.  So for now we won't use
- * separate compilation ... ensuring init/exit sections work to shrink
- * the runtime footprint, and giving us at least some parts of what
- * a "gcc --combine ... part1.c part2.c part3.c ... " build would.
- */
-#include "f_mass_storage.c"
-
-#define USBF_ECM_INCLUDED
-#include "f_ecm.c"
+#include "u_ecm.h"
 #ifdef USB_ETH_RNDIS
-#  define USB_FRNDIS_INCLUDED
-#  include "f_rndis.c"
+#  include "u_rndis.h"
 #  include "rndis.h"
 #endif
 #include "u_ether.h"
@@ -132,22 +122,36 @@ static struct usb_gadget_strings *dev_strings[] = {
 /****************************** Configurations ******************************/
 
 static struct fsg_module_parameters fsg_mod_data = { .stall = 1 };
-FSG_MODULE_PARAMETERS(/* no prefix */, fsg_mod_data);
+#ifdef CONFIG_USB_GADGET_DEBUG_FILES
+
+static unsigned int fsg_num_buffers = CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS;
 
-static struct fsg_common fsg_common;
+#else
+
+/*
+ * Number of buffers we will use.
+ * 2 is usually enough for good buffering pipeline
+ */
+#define fsg_num_buffers	CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS
 
-static u8 host_mac[ETH_ALEN];
+#endif /* CONFIG_USB_DEBUG */
+
+FSG_MODULE_PARAMETERS(/* no prefix */, fsg_mod_data);
 
 static struct usb_function_instance *fi_acm;
-static struct eth_dev *the_dev;
+static struct usb_function_instance *fi_msg;
 
 /********** RNDIS **********/
 
 #ifdef USB_ETH_RNDIS
+static struct usb_function_instance *fi_rndis;
 static struct usb_function *f_acm_rndis;
+static struct usb_function *f_rndis;
+static struct usb_function *f_msg_rndis;
 
 static __init int rndis_do_config(struct usb_configuration *c)
 {
+	struct fsg_opts *fsg_opts;
 	int ret;
 
 	if (gadget_is_otg(c->cdev->gadget)) {
@@ -155,27 +159,50 @@ static __init int rndis_do_config(struct usb_configuration *c)
 		c->bmAttributes |= USB_CONFIG_ATT_WAKEUP;
 	}
 
-	ret = rndis_bind_config(c, host_mac, the_dev);
+	f_rndis = usb_get_function(fi_rndis);
+	if (IS_ERR(f_rndis))
+		return PTR_ERR(f_rndis);
+
+	ret = usb_add_function(c, f_rndis);
 	if (ret < 0)
-		return ret;
+		goto err_func_rndis;
 
 	f_acm_rndis = usb_get_function(fi_acm);
-	if (IS_ERR(f_acm_rndis))
-		return PTR_ERR(f_acm_rndis);
+	if (IS_ERR(f_acm_rndis)) {
+		ret = PTR_ERR(f_acm_rndis);
+		goto err_func_acm;
+	}
 
 	ret = usb_add_function(c, f_acm_rndis);
 	if (ret)
 		goto err_conf;
 
-	ret = fsg_bind_config(c->cdev, c, &fsg_common);
-	if (ret < 0)
+	f_msg_rndis = usb_get_function(fi_msg);
+	if (IS_ERR(f_msg_rndis)) {
+		ret = PTR_ERR(f_msg_rndis);
 		goto err_fsg;
+	}
+
+	fsg_opts = fsg_opts_from_func_inst(fi_msg);
+	ret = fsg_common_run_thread(fsg_opts->common);
+	if (ret)
+		goto err_run;
+
+	ret = usb_add_function(c, f_msg_rndis);
+	if (ret)
+		goto err_run;
 
 	return 0;
+err_run:
+	usb_put_function(f_msg_rndis);
 err_fsg:
 	usb_remove_function(c, f_acm_rndis);
 err_conf:
 	usb_put_function(f_acm_rndis);
+err_func_acm:
+	usb_remove_function(c, f_rndis);
+err_func_rndis:
+	usb_put_function(f_rndis);
 	return ret;
 }
 
@@ -205,10 +232,14 @@ static __ref int rndis_config_register(struct usb_composite_dev *cdev)
 /********** CDC ECM **********/
 
 #ifdef CONFIG_USB_G_MULTI_CDC
+static struct usb_function_instance *fi_ecm;
 static struct usb_function *f_acm_multi;
+static struct usb_function *f_ecm;
+static struct usb_function *f_msg_multi;
 
 static __init int cdc_do_config(struct usb_configuration *c)
 {
+	struct fsg_opts *fsg_opts;
 	int ret;
 
 	if (gadget_is_otg(c->cdev->gadget)) {
@@ -216,28 +247,51 @@ static __init int cdc_do_config(struct usb_configuration *c)
 		c->bmAttributes |= USB_CONFIG_ATT_WAKEUP;
 	}
 
-	ret = ecm_bind_config(c, host_mac, the_dev);
+	f_ecm = usb_get_function(fi_ecm);
+	if (IS_ERR(f_ecm))
+		return PTR_ERR(f_ecm);
+
+	ret = usb_add_function(c, f_ecm);
 	if (ret < 0)
-		return ret;
+		goto err_func_ecm;
 
 	/* implicit port_num is zero */
 	f_acm_multi = usb_get_function(fi_acm);
-	if (IS_ERR(f_acm_multi))
-		return PTR_ERR(f_acm_multi);
+	if (IS_ERR(f_acm_multi)) {
+		ret = PTR_ERR(f_acm_multi);
+		goto err_func_acm;
+	}
 
 	ret = usb_add_function(c, f_acm_multi);
 	if (ret)
 		goto err_conf;
 
-	ret = fsg_bind_config(c->cdev, c, &fsg_common);
-	if (ret < 0)
+	f_msg_multi = usb_get_function(fi_msg);
+	if (IS_ERR(f_msg_multi)) {
+		ret = PTR_ERR(f_msg_multi);
 		goto err_fsg;
+	}
+
+	fsg_opts = fsg_opts_from_func_inst(fi_msg);
+	ret = fsg_common_run_thread(fsg_opts->common);
+	if (ret)
+		goto err_run;
+
+	ret = usb_add_function(c, f_msg_multi);
+	if (ret)
+		goto err_run;
 
 	return 0;
+err_run:
+	usb_put_function(f_msg_multi);
 err_fsg:
 	usb_remove_function(c, f_acm_multi);
 err_conf:
 	usb_put_function(f_acm_multi);
+err_func_acm:
+	usb_remove_function(c, f_ecm);
+err_func_ecm:
+	usb_put_function(f_ecm);
 	return ret;
 }
 
@@ -270,19 +324,67 @@ static __ref int cdc_config_register(struct usb_composite_dev *cdev)
 static int __ref multi_bind(struct usb_composite_dev *cdev)
 {
 	struct usb_gadget *gadget = cdev->gadget;
+#ifdef CONFIG_USB_G_MULTI_CDC
+	struct f_ecm_opts *ecm_opts;
+#endif
+#ifdef USB_ETH_RNDIS
+	struct f_rndis_opts *rndis_opts;
+#endif
+	struct fsg_opts *fsg_opts;
+	struct fsg_config config;
 	int status;
 
 	if (!can_support_ecm(cdev->gadget)) {
 		dev_err(&gadget->dev, "controller '%s' not usable\n",
-		        gadget->name);
+			gadget->name);
 		return -EINVAL;
 	}
 
-	/* set up network link layer */
-	the_dev = gether_setup(cdev->gadget, dev_addr, host_addr, host_mac,
-			       qmult);
-	if (IS_ERR(the_dev))
-		return PTR_ERR(the_dev);
+#ifdef CONFIG_USB_G_MULTI_CDC
+	fi_ecm = usb_get_function_instance("ecm");
+	if (IS_ERR(fi_ecm))
+		return PTR_ERR(fi_ecm);
+
+	ecm_opts = container_of(fi_ecm, struct f_ecm_opts, func_inst);
+
+	gether_set_qmult(ecm_opts->net, qmult);
+	if (!gether_set_host_addr(ecm_opts->net, host_addr))
+		pr_info("using host ethernet address: %s", host_addr);
+	if (!gether_set_dev_addr(ecm_opts->net, dev_addr))
+		pr_info("using self ethernet address: %s", dev_addr);
+#endif
+
+#ifdef USB_ETH_RNDIS
+	fi_rndis = usb_get_function_instance("rndis");
+	if (IS_ERR(fi_rndis)) {
+		status = PTR_ERR(fi_rndis);
+		goto fail;
+	}
+
+	rndis_opts = container_of(fi_rndis, struct f_rndis_opts, func_inst);
+
+	gether_set_qmult(rndis_opts->net, qmult);
+	if (!gether_set_host_addr(rndis_opts->net, host_addr))
+		pr_info("using host ethernet address: %s", host_addr);
+	if (!gether_set_dev_addr(rndis_opts->net, dev_addr))
+		pr_info("using self ethernet address: %s", dev_addr);
+#endif
+
+#if (defined CONFIG_USB_G_MULTI_CDC && defined USB_ETH_RNDIS)
+	/*
+	 * If both ecm and rndis are selected then:
+	 *	1) rndis borrows the net interface from ecm
+	 *	2) since the interface is shared it must not be bound
+	 *	twice - in ecm's _and_ rndis' binds, so do it here.
+	 */
+	gether_set_gadget(ecm_opts->net, cdev->gadget);
+	status = gether_register_netdev(ecm_opts->net);
+	if (status)
+		goto fail0;
+
+	rndis_borrow_net(fi_rndis, ecm_opts->net);
+	ecm_opts->bound = true;
+#endif
 
 	/* set up serial link layer */
 	fi_acm = usb_get_function_instance("acm");
@@ -292,49 +394,87 @@ static int __ref multi_bind(struct usb_composite_dev *cdev)
 	}
 
 	/* set up mass storage function */
-	{
-		void *retp;
-		retp = fsg_common_from_params(&fsg_common, cdev, &fsg_mod_data);
-		if (IS_ERR(retp)) {
-			status = PTR_ERR(retp);
-			goto fail1;
-		}
+	fi_msg = usb_get_function_instance("mass_storage");
+	if (IS_ERR(fi_msg)) {
+		status = PTR_ERR(fi_msg);
+		goto fail1;
 	}
+	fsg_config_from_params(&config, &fsg_mod_data, fsg_num_buffers);
+	fsg_opts = fsg_opts_from_func_inst(fi_msg);
+
+	fsg_opts->no_configfs = true;
+	status = fsg_common_set_num_buffers(fsg_opts->common, fsg_num_buffers);
+	if (status)
+		goto fail2;
+
+	status = fsg_common_set_nluns(fsg_opts->common, config.nluns);
+	if (status)
+		goto fail_set_nluns;
+
+	status = fsg_common_set_cdev(fsg_opts->common, cdev, config.can_stall);
+	if (status)
+		goto fail_set_cdev;
+
+	fsg_common_set_sysfs(fsg_opts->common, true);
+	status = fsg_common_create_luns(fsg_opts->common, &config);
+	if (status)
+		goto fail_set_cdev;
+
+	fsg_common_set_inquiry_string(fsg_opts->common, config.vendor_name,
+				      config.product_name);
 
 	/* allocate string IDs */
 	status = usb_string_ids_tab(cdev, strings_dev);
 	if (unlikely(status < 0))
-		goto fail2;
+		goto fail_string_ids;
 	device_desc.iProduct = strings_dev[USB_GADGET_PRODUCT_IDX].id;
 
 	/* register configurations */
 	status = rndis_config_register(cdev);
 	if (unlikely(status < 0))
-		goto fail2;
+		goto fail_string_ids;
 
 	status = cdc_config_register(cdev);
 	if (unlikely(status < 0))
-		goto fail2;
+		goto fail_string_ids;
 	usb_composite_overwrite_options(cdev, &coverwrite);
 
 	/* we're done */
 	dev_info(&gadget->dev, DRIVER_DESC "\n");
-	fsg_common_put(&fsg_common);
 	return 0;
 
 
 	/* error recovery */
+fail_string_ids:
+	fsg_common_remove_luns(fsg_opts->common);
+fail_set_cdev:
+	fsg_common_free_luns(fsg_opts->common);
+fail_set_nluns:
+	fsg_common_free_buffers(fsg_opts->common);
 fail2:
-	fsg_common_put(&fsg_common);
+	usb_put_function_instance(fi_msg);
 fail1:
 	usb_put_function_instance(fi_acm);
 fail0:
-	gether_cleanup(the_dev);
+#ifdef USB_ETH_RNDIS
+	usb_put_function_instance(fi_rndis);
+fail:
+#endif
+#ifdef CONFIG_USB_G_MULTI_CDC
+	usb_put_function_instance(fi_ecm);
+#endif
 	return status;
 }
 
 static int __exit multi_unbind(struct usb_composite_dev *cdev)
 {
+#ifdef CONFIG_USB_G_MULTI_CDC
+	usb_put_function(f_msg_multi);
+#endif
+#ifdef USB_ETH_RNDIS
+	usb_put_function(f_msg_rndis);
+#endif
+	usb_put_function_instance(fi_msg);
 #ifdef CONFIG_USB_G_MULTI_CDC
 	usb_put_function(f_acm_multi);
 #endif
@@ -342,7 +482,14 @@ static int __exit multi_unbind(struct usb_composite_dev *cdev)
 	usb_put_function(f_acm_rndis);
 #endif
 	usb_put_function_instance(fi_acm);
-	gether_cleanup(the_dev);
+#ifdef USB_ETH_RNDIS
+	usb_put_function(f_rndis);
+	usb_put_function_instance(fi_rndis);
+#endif
+#ifdef CONFIG_USB_G_MULTI_CDC
+	usb_put_function(f_ecm);
+	usb_put_function_instance(fi_ecm);
+#endif
 	return 0;
 }
 

drivers/usb/gadget/mv_u3d_core.c

@@ -310,6 +310,7 @@ static struct mv_u3d_trb *mv_u3d_build_trb_one(struct mv_u3d_req *req,
 	 */
 	trb_hw = dma_pool_alloc(u3d->trb_pool, GFP_ATOMIC, dma);
 	if (!trb_hw) {
+		kfree(trb);
 		dev_err(u3d->dev,
 			"%s, dma_pool_alloc fail\n", __func__);
 		return NULL;
@@ -454,6 +455,7 @@ static int mv_u3d_req_to_trb(struct mv_u3d_req *req)
 
 		trb_hw = kcalloc(trb_num, sizeof(*trb_hw), GFP_ATOMIC);
 		if (!trb_hw) {
+			kfree(trb);
 			dev_err(u3d->dev,
 					"%s, trb_hw alloc fail\n", __func__);
 			return -ENOMEM;

drivers/usb/gadget/s3c-hsotg.c

@@ -83,9 +83,12 @@ struct s3c_hsotg_req;
  * @dir_in: Set to true if this endpoint is of the IN direction, which
  *	    means that it is sending data to the Host.
  * @index: The index for the endpoint registers.
+ * @mc: Multi Count - number of transactions per microframe
+ * @interval - Interval for periodic endpoints
  * @name: The name array passed to the USB core.
  * @halted: Set if the endpoint has been halted.
  * @periodic: Set if this is a periodic ep, such as Interrupt
+ * @isochronous: Set if this is a isochronous ep
  * @sent_zlp: Set if we've sent a zero-length packet.
  * @total_data: The total number of data bytes done.
  * @fifo_size: The size of the FIFO (for periodic IN endpoints)
@@ -121,9 +124,12 @@ struct s3c_hsotg_ep {
 
 	unsigned char		dir_in;
 	unsigned char		index;
+	unsigned char		mc;
+	unsigned char		interval;
 
 	unsigned int		halted:1;
 	unsigned int		periodic:1;
+	unsigned int		isochronous:1;
 	unsigned int		sent_zlp:1;
 
 	char			name[10];
@@ -468,6 +474,7 @@ static int s3c_hsotg_write_fifo(struct s3c_hsotg *hsotg,
 	void *data;
 	int can_write;
 	int pkt_round;
+	int max_transfer;
 
 	to_write -= (buf_pos - hs_ep->last_load);
 
@@ -535,8 +542,10 @@ static int s3c_hsotg_write_fifo(struct s3c_hsotg *hsotg,
 		can_write *= 4;	/* fifo size is in 32bit quantities. */
 	}
 
-	dev_dbg(hsotg->dev, "%s: GNPTXSTS=%08x, can=%d, to=%d, mps %d\n",
-		 __func__, gnptxsts, can_write, to_write, hs_ep->ep.maxpacket);
+	max_transfer = hs_ep->ep.maxpacket * hs_ep->mc;
+
+	dev_dbg(hsotg->dev, "%s: GNPTXSTS=%08x, can=%d, to=%d, max_transfer %d\n",
+		 __func__, gnptxsts, can_write, to_write, max_transfer);
 
 	/*
 	 * limit to 512 bytes of data, it seems at least on the non-periodic
@@ -551,19 +560,21 @@ static int s3c_hsotg_write_fifo(struct s3c_hsotg *hsotg,
 	 * the transfer to return that it did not run out of fifo space
 	 * doing it.
 	 */
-	if (to_write > hs_ep->ep.maxpacket) {
-		to_write = hs_ep->ep.maxpacket;
+	if (to_write > max_transfer) {
+		to_write = max_transfer;
 
-		s3c_hsotg_en_gsint(hsotg,
-				   periodic ? GINTSTS_PTxFEmp :
-				   GINTSTS_NPTxFEmp);
+		/* it's needed only when we do not use dedicated fifos */
+		if (!hsotg->dedicated_fifos)
+			s3c_hsotg_en_gsint(hsotg,
+					   periodic ? GINTSTS_PTxFEmp :
+					   GINTSTS_NPTxFEmp);
 	}
 
 	/* see if we can write data */
 
 	if (to_write > can_write) {
 		to_write = can_write;
-		pkt_round = to_write % hs_ep->ep.maxpacket;
+		pkt_round = to_write % max_transfer;
 
 		/*
 		 * Round the write down to an
@@ -581,9 +592,11 @@ static int s3c_hsotg_write_fifo(struct s3c_hsotg *hsotg,
 		 * is more room left.
 		 */
 
-		s3c_hsotg_en_gsint(hsotg,
-				   periodic ? GINTSTS_PTxFEmp :
-				   GINTSTS_NPTxFEmp);
+		/* it's needed only when we do not use dedicated fifos */
+		if (!hsotg->dedicated_fifos)
+			s3c_hsotg_en_gsint(hsotg,
+					   periodic ? GINTSTS_PTxFEmp :
+					   GINTSTS_NPTxFEmp);
 	}
 
 	dev_dbg(hsotg->dev, "write %d/%d, can_write %d, done %d\n",
@@ -727,8 +740,16 @@ static void s3c_hsotg_start_req(struct s3c_hsotg *hsotg,
 	else
 		packets = 1;	/* send one packet if length is zero. */
 
+	if (hs_ep->isochronous && length > (hs_ep->mc * hs_ep->ep.maxpacket)) {
+		dev_err(hsotg->dev, "req length > maxpacket*mc\n");
+		return;
+	}
+
 	if (dir_in && index != 0)
-		epsize = DxEPTSIZ_MC(1);
+		if (hs_ep->isochronous)
+			epsize = DxEPTSIZ_MC(packets);
+		else
+			epsize = DxEPTSIZ_MC(1);
 	else
 		epsize = 0;
 
@@ -820,6 +841,9 @@ static void s3c_hsotg_start_req(struct s3c_hsotg *hsotg,
 
 	dev_dbg(hsotg->dev, "%s: DxEPCTL=0x%08x\n",
 		__func__, readl(hsotg->regs + epctrl_reg));
+
+	/* enable ep interrupts */
+	s3c_hsotg_ctrl_epint(hsotg, hs_ep->index, hs_ep->dir_in, 1);
 }
 
 /**
@@ -1091,6 +1115,7 @@ static int s3c_hsotg_process_req_feature(struct s3c_hsotg *hsotg,
 	bool set = (ctrl->bRequest == USB_REQ_SET_FEATURE);
 	struct s3c_hsotg_ep *ep;
 	int ret;
+	bool halted;
 
 	dev_dbg(hsotg->dev, "%s: %s_FEATURE\n",
 		__func__, set ? "SET" : "CLEAR");
@@ -1105,6 +1130,8 @@ static int s3c_hsotg_process_req_feature(struct s3c_hsotg *hsotg,
 
 		switch (le16_to_cpu(ctrl->wValue)) {
 		case USB_ENDPOINT_HALT:
+			halted = ep->halted;
+
 			s3c_hsotg_ep_sethalt(&ep->ep, set);
 
 			ret = s3c_hsotg_send_reply(hsotg, ep0, NULL, 0);
@@ -1114,7 +1141,12 @@ static int s3c_hsotg_process_req_feature(struct s3c_hsotg *hsotg,
 				return ret;
 			}
 
-			if (!set) {
+			/*
+			 * we have to complete all requests for ep if it was
+			 * halted, and the halt was cleared by CLEAR_FEATURE
+			 */
+
+			if (!set && halted) {
 				/*
 				 * If we have request in progress,
 				 * then complete it
@@ -1147,6 +1179,8 @@ static int s3c_hsotg_process_req_feature(struct s3c_hsotg *hsotg,
 	return 1;
 }
 
+static void s3c_hsotg_enqueue_setup(struct s3c_hsotg *hsotg);
+
 /**
  * s3c_hsotg_process_control - process a control request
  * @hsotg: The device state
@@ -1246,11 +1280,15 @@ static void s3c_hsotg_process_control(struct s3c_hsotg *hsotg,
 		 * don't believe we need to anything more to get the EP
 		 * to reply with a STALL packet
 		 */
+
+		 /*
+		  * complete won't be called, so we enqueue
+		  * setup request here
+		  */
+		 s3c_hsotg_enqueue_setup(hsotg);
 	}
 }
 
-static void s3c_hsotg_enqueue_setup(struct s3c_hsotg *hsotg);
-
 /**
  * s3c_hsotg_complete_setup - completion of a setup transfer
  * @ep: The endpoint the request was on.
@@ -1698,6 +1736,7 @@ static void s3c_hsotg_set_ep_maxpacket(struct s3c_hsotg *hsotg,
 	struct s3c_hsotg_ep *hs_ep = &hsotg->eps[ep];
 	void __iomem *regs = hsotg->regs;
 	u32 mpsval;
+	u32 mcval;
 	u32 reg;
 
 	if (ep == 0) {
@@ -1705,15 +1744,19 @@ static void s3c_hsotg_set_ep_maxpacket(struct s3c_hsotg *hsotg,
 		mpsval = s3c_hsotg_ep0_mps(mps);
 		if (mpsval > 3)
 			goto bad_mps;
+		hs_ep->ep.maxpacket = mps;
+		hs_ep->mc = 1;
 	} else {
-		if (mps >= DxEPCTL_MPS_LIMIT+1)
+		mpsval = mps & DxEPCTL_MPS_MASK;
+		if (mpsval > 1024)
 			goto bad_mps;
-
-		mpsval = mps;
+		mcval = ((mps >> 11) & 0x3) + 1;
+		hs_ep->mc = mcval;
+		if (mcval > 3)
+			goto bad_mps;
+		hs_ep->ep.maxpacket = mpsval;
 	}
 
-	hs_ep->ep.maxpacket = mps;
-
 	/*
 	 * update both the in and out endpoint controldir_ registers, even
 	 * if one of the directions may not be in use.
@@ -1782,8 +1825,16 @@ static int s3c_hsotg_trytx(struct s3c_hsotg *hsotg,
 {
 	struct s3c_hsotg_req *hs_req = hs_ep->req;
 
-	if (!hs_ep->dir_in || !hs_req)
+	if (!hs_ep->dir_in || !hs_req) {
+		/**
+		 * if request is not enqueued, we disable interrupts
+		 * for endpoints, excepting ep0
+		 */
+		if (hs_ep->index != 0)
+			s3c_hsotg_ctrl_epint(hsotg, hs_ep->index,
+					     hs_ep->dir_in, 0);
 		return 0;
+	}
 
 	if (hs_req->req.actual < hs_req->req.length) {
 		dev_dbg(hsotg->dev, "trying to write more for ep%d\n",
@@ -1887,8 +1938,10 @@ static void s3c_hsotg_epint(struct s3c_hsotg *hsotg, unsigned int idx,
 	u32 epctl_reg = dir_in ? DIEPCTL(idx) : DOEPCTL(idx);
 	u32 epsiz_reg = dir_in ? DIEPTSIZ(idx) : DOEPTSIZ(idx);
 	u32 ints;
+	u32 ctrl;
 
 	ints = readl(hsotg->regs + epint_reg);
+	ctrl = readl(hsotg->regs + epctl_reg);
 
 	/* Clear endpoint interrupts */
 	writel(ints, hsotg->regs + epint_reg);
@@ -1897,6 +1950,14 @@ static void s3c_hsotg_epint(struct s3c_hsotg *hsotg, unsigned int idx,
 		__func__, idx, dir_in ? "in" : "out", ints);
 
 	if (ints & DxEPINT_XferCompl) {
+		if (hs_ep->isochronous && hs_ep->interval == 1) {
+			if (ctrl & DxEPCTL_EOFrNum)
+				ctrl |= DxEPCTL_SetEvenFr;
+			else
+				ctrl |= DxEPCTL_SetOddFr;
+			writel(ctrl, hsotg->regs + epctl_reg);
+		}
+
 		dev_dbg(hsotg->dev,
 			"%s: XferCompl: DxEPCTL=0x%08x, DxEPTSIZ=%08x\n",
 			__func__, readl(hsotg->regs + epctl_reg),
@@ -1963,7 +2024,7 @@ static void s3c_hsotg_epint(struct s3c_hsotg *hsotg, unsigned int idx,
 	if (ints & DxEPINT_Back2BackSetup)
 		dev_dbg(hsotg->dev, "%s: B2BSetup/INEPNakEff\n", __func__);
 
-	if (dir_in) {
+	if (dir_in && !hs_ep->isochronous) {
 		/* not sure if this is important, but we'll clear it anyway */
 		if (ints & DIEPMSK_INTknTXFEmpMsk) {
 			dev_dbg(hsotg->dev, "%s: ep%d: INTknTXFEmpMsk\n",
@@ -2092,12 +2153,14 @@ static void kill_all_requests(struct s3c_hsotg *hsotg,
 }
 
 #define call_gadget(_hs, _entry) \
+do { \
 	if ((_hs)->gadget.speed != USB_SPEED_UNKNOWN &&	\
 	    (_hs)->driver && (_hs)->driver->_entry) { \
 		spin_unlock(&_hs->lock); \
 		(_hs)->driver->_entry(&(_hs)->gadget); \
 		spin_lock(&_hs->lock); \
-		}
+	} \
+} while (0)
 
 /**
  * s3c_hsotg_disconnect - disconnect service
@@ -2241,15 +2304,19 @@ static void s3c_hsotg_core_init(struct s3c_hsotg *hsotg)
 		       GAHBCFG_HBstLen_Incr4,
 		       hsotg->regs + GAHBCFG);
 	else
-		writel(GAHBCFG_GlblIntrEn, hsotg->regs + GAHBCFG);
+		writel(((hsotg->dedicated_fifos) ? (GAHBCFG_NPTxFEmpLvl |
+						    GAHBCFG_PTxFEmpLvl) : 0) |
+		       GAHBCFG_GlblIntrEn,
+		       hsotg->regs + GAHBCFG);
 
 	/*
-	 * Enabling INTknTXFEmpMsk here seems to be a big mistake, we end
-	 * up being flooded with interrupts if the host is polling the
-	 * endpoint to try and read data.
+	 * If INTknTXFEmpMsk is enabled, it's important to disable ep interrupts
+	 * when we have no data to transfer. Otherwise we get being flooded by
+	 * interrupts.
 	 */
 
-	writel(((hsotg->dedicated_fifos) ? DIEPMSK_TxFIFOEmpty : 0) |
+	writel(((hsotg->dedicated_fifos) ? DIEPMSK_TxFIFOEmpty |
+	       DIEPMSK_INTknTXFEmpMsk : 0) |
 	       DIEPMSK_EPDisbldMsk | DIEPMSK_XferComplMsk |
 	       DIEPMSK_TimeOUTMsk | DIEPMSK_AHBErrMsk |
 	       DIEPMSK_INTknEPMisMsk,
@@ -2378,10 +2445,14 @@ irq_retry:
 
 	if (gintsts & (GINTSTS_OEPInt | GINTSTS_IEPInt)) {
 		u32 daint = readl(hsotg->regs + DAINT);
-		u32 daint_out = daint >> DAINT_OutEP_SHIFT;
-		u32 daint_in = daint & ~(daint_out << DAINT_OutEP_SHIFT);
+		u32 daintmsk = readl(hsotg->regs + DAINTMSK);
+		u32 daint_out, daint_in;
 		int ep;
 
+		daint &= daintmsk;
+		daint_out = daint >> DAINT_OutEP_SHIFT;
+		daint_in = daint & ~(daint_out << DAINT_OutEP_SHIFT);
+
 		dev_dbg(hsotg->dev, "%s: daint=%08x\n", __func__, daint);
 
 		for (ep = 0; ep < 15 && daint_out; ep++, daint_out >>= 1) {
@@ -2577,16 +2648,25 @@ static int s3c_hsotg_ep_enable(struct usb_ep *ep,
 	epctrl |= DxEPCTL_SNAK;
 
 	/* update the endpoint state */
-	hs_ep->ep.maxpacket = mps;
+	s3c_hsotg_set_ep_maxpacket(hsotg, hs_ep->index, mps);
 
 	/* default, set to non-periodic */
+	hs_ep->isochronous = 0;
 	hs_ep->periodic = 0;
+	hs_ep->halted = 0;
+	hs_ep->interval = desc->bInterval;
+
+	if (hs_ep->interval > 1 && hs_ep->mc > 1)
+		dev_err(hsotg->dev, "MC > 1 when interval is not 1\n");
 
 	switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
 	case USB_ENDPOINT_XFER_ISOC:
-		dev_err(hsotg->dev, "no current ISOC support\n");
-		ret = -EINVAL;
-		goto out;
+		epctrl |= DxEPCTL_EPType_Iso;
+		epctrl |= DxEPCTL_SetEvenFr;
+		hs_ep->isochronous = 1;
+		if (dir_in)
+			hs_ep->periodic = 1;
+		break;
 
 	case USB_ENDPOINT_XFER_BULK:
 		epctrl |= DxEPCTL_EPType_Bulk;
@@ -2634,7 +2714,6 @@ static int s3c_hsotg_ep_enable(struct usb_ep *ep,
 	/* enable the endpoint interrupt */
 	s3c_hsotg_ctrl_epint(hsotg, index, dir_in, 1);
 
-out:
 	spin_unlock_irqrestore(&hsotg->lock, flags);
 	return ret;
 }
@@ -2776,6 +2855,8 @@ static int s3c_hsotg_ep_sethalt(struct usb_ep *ep, int value)
 
 	writel(epctl, hs->regs + epreg);
 
+	hs_ep->halted = value;
+
 	return 0;
 }
 
@@ -2903,7 +2984,7 @@ static int s3c_hsotg_udc_start(struct usb_gadget *gadget,
 	int ret;
 
 	if (!hsotg) {
-		printk(KERN_ERR "%s: called with no device\n", __func__);
+		pr_err("%s: called with no device\n", __func__);
 		return -ENODEV;
 	}
 
@@ -3066,7 +3147,7 @@ static void s3c_hsotg_initep(struct s3c_hsotg *hsotg,
 
 	hs_ep->parent = hsotg;
 	hs_ep->ep.name = hs_ep->name;
-	hs_ep->ep.maxpacket = epnum ? 512 : EP0_MPS_LIMIT;
+	hs_ep->ep.maxpacket = epnum ? 1024 : EP0_MPS_LIMIT;
 	hs_ep->ep.ops = &s3c_hsotg_ep_ops;
 
 	/*
@@ -3200,7 +3281,7 @@ static int state_show(struct seq_file *seq, void *v)
 		   readl(regs + GNPTXSTS),
 		   readl(regs + GRXSTSR));
 
-	seq_printf(seq, "\nEndpoint status:\n");
+	seq_puts(seq, "\nEndpoint status:\n");
 
 	for (idx = 0; idx < 15; idx++) {
 		u32 in, out;
@@ -3217,7 +3298,7 @@ static int state_show(struct seq_file *seq, void *v)
 		seq_printf(seq, ", DIEPTSIZ=0x%08x, DOEPTSIZ=0x%08x",
 			   in, out);
 
-		seq_printf(seq, "\n");
+		seq_puts(seq, "\n");
 	}
 
 	return 0;
@@ -3251,7 +3332,7 @@ static int fifo_show(struct seq_file *seq, void *v)
 	u32 val;
 	int idx;
 
-	seq_printf(seq, "Non-periodic FIFOs:\n");
+	seq_puts(seq, "Non-periodic FIFOs:\n");
 	seq_printf(seq, "RXFIFO: Size %d\n", readl(regs + GRXFSIZ));
 
 	val = readl(regs + GNPTXFSIZ);
@@ -3259,7 +3340,7 @@ static int fifo_show(struct seq_file *seq, void *v)
 		   val >> GNPTXFSIZ_NPTxFDep_SHIFT,
 		   val & GNPTXFSIZ_NPTxFStAddr_MASK);
 
-	seq_printf(seq, "\nPeriodic TXFIFOs:\n");
+	seq_puts(seq, "\nPeriodic TXFIFOs:\n");
 
 	for (idx = 1; idx <= 15; idx++) {
 		val = readl(regs + DPTXFSIZn(idx));
@@ -3330,7 +3411,7 @@ static int ep_show(struct seq_file *seq, void *v)
 		   readl(regs + DIEPTSIZ(index)),
 		   readl(regs + DOEPTSIZ(index)));
 
-	seq_printf(seq, "\n");
+	seq_puts(seq, "\n");
 	seq_printf(seq, "mps %d\n", ep->ep.maxpacket);
 	seq_printf(seq, "total_data=%ld\n", ep->total_data);
 
@@ -3341,7 +3422,7 @@ static int ep_show(struct seq_file *seq, void *v)
 
 	list_for_each_entry(req, &ep->queue, queue) {
 		if (--show_limit < 0) {
-			seq_printf(seq, "not showing more requests...\n");
+			seq_puts(seq, "not showing more requests...\n");
 			break;
 		}
 

drivers/usb/gadget/storage_common.c

@@ -23,242 +23,17 @@
  * The valid range of num_buffers is: num >= 2 && num <= 4.
  */
 
+#include <linux/module.h>
+#include <linux/blkdev.h>
+#include <linux/file.h>
+#include <linux/fs.h>
+#include <linux/usb/composite.h>
 
-#include <linux/usb/storage.h>
-#include <scsi/scsi.h>
-#include <asm/unaligned.h>
-
-
-/*
- * Thanks to NetChip Technologies for donating this product ID.
- *
- * DO NOT REUSE THESE IDs with any other driver!!  Ever!!
- * Instead:  allocate your own, using normal USB-IF procedures.
- */
-#define FSG_VENDOR_ID	0x0525	/* NetChip */
-#define FSG_PRODUCT_ID	0xa4a5	/* Linux-USB File-backed Storage Gadget */
-
-
-/*-------------------------------------------------------------------------*/
-
-
-#ifndef DEBUG
-#undef VERBOSE_DEBUG
-#undef DUMP_MSGS
-#endif /* !DEBUG */
-
-#ifdef VERBOSE_DEBUG
-#define VLDBG	LDBG
-#else
-#define VLDBG(lun, fmt, args...) do { } while (0)
-#endif /* VERBOSE_DEBUG */
-
-#define LDBG(lun, fmt, args...)   dev_dbg (&(lun)->dev, fmt, ## args)
-#define LERROR(lun, fmt, args...) dev_err (&(lun)->dev, fmt, ## args)
-#define LWARN(lun, fmt, args...)  dev_warn(&(lun)->dev, fmt, ## args)
-#define LINFO(lun, fmt, args...)  dev_info(&(lun)->dev, fmt, ## args)
-
-
-#ifdef DUMP_MSGS
-
-#  define dump_msg(fsg, /* const char * */ label,			\
-		   /* const u8 * */ buf, /* unsigned */ length) do {	\
-	if (length < 512) {						\
-		DBG(fsg, "%s, length %u:\n", label, length);		\
-		print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET,	\
-			       16, 1, buf, length, 0);			\
-	}								\
-} while (0)
-
-#  define dump_cdb(fsg) do { } while (0)
-
-#else
-
-#  define dump_msg(fsg, /* const char * */ label, \
-		   /* const u8 * */ buf, /* unsigned */ length) do { } while (0)
-
-#  ifdef VERBOSE_DEBUG
-
-#    define dump_cdb(fsg)						\
-	print_hex_dump(KERN_DEBUG, "SCSI CDB: ", DUMP_PREFIX_NONE,	\
-		       16, 1, (fsg)->cmnd, (fsg)->cmnd_size, 0)		\
-
-#  else
-
-#    define dump_cdb(fsg) do { } while (0)
-
-#  endif /* VERBOSE_DEBUG */
-
-#endif /* DUMP_MSGS */
-
-/*-------------------------------------------------------------------------*/
-
-/* Length of a SCSI Command Data Block */
-#define MAX_COMMAND_SIZE	16
-
-/* SCSI Sense Key/Additional Sense Code/ASC Qualifier values */
-#define SS_NO_SENSE				0
-#define SS_COMMUNICATION_FAILURE		0x040800
-#define SS_INVALID_COMMAND			0x052000
-#define SS_INVALID_FIELD_IN_CDB			0x052400
-#define SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE	0x052100
-#define SS_LOGICAL_UNIT_NOT_SUPPORTED		0x052500
-#define SS_MEDIUM_NOT_PRESENT			0x023a00
-#define SS_MEDIUM_REMOVAL_PREVENTED		0x055302
-#define SS_NOT_READY_TO_READY_TRANSITION	0x062800
-#define SS_RESET_OCCURRED			0x062900
-#define SS_SAVING_PARAMETERS_NOT_SUPPORTED	0x053900
-#define SS_UNRECOVERED_READ_ERROR		0x031100
-#define SS_WRITE_ERROR				0x030c02
-#define SS_WRITE_PROTECTED			0x072700
-
-#define SK(x)		((u8) ((x) >> 16))	/* Sense Key byte, etc. */
-#define ASC(x)		((u8) ((x) >> 8))
-#define ASCQ(x)		((u8) (x))
-
-
-/*-------------------------------------------------------------------------*/
-
-
-struct fsg_lun {
-	struct file	*filp;
-	loff_t		file_length;
-	loff_t		num_sectors;
-
-	unsigned int	initially_ro:1;
-	unsigned int	ro:1;
-	unsigned int	removable:1;
-	unsigned int	cdrom:1;
-	unsigned int	prevent_medium_removal:1;
-	unsigned int	registered:1;
-	unsigned int	info_valid:1;
-	unsigned int	nofua:1;
-
-	u32		sense_data;
-	u32		sense_data_info;
-	u32		unit_attention_data;
-
-	unsigned int	blkbits;	/* Bits of logical block size of bound block device */
-	unsigned int	blksize;	/* logical block size of bound block device */
-	struct device	dev;
-};
-
-static inline bool fsg_lun_is_open(struct fsg_lun *curlun)
-{
-	return curlun->filp != NULL;
-}
-
-static inline struct fsg_lun *fsg_lun_from_dev(struct device *dev)
-{
-	return container_of(dev, struct fsg_lun, dev);
-}
-
-
-/* Big enough to hold our biggest descriptor */
-#define EP0_BUFSIZE	256
-#define DELAYED_STATUS	(EP0_BUFSIZE + 999)	/* An impossibly large value */
-
-#ifdef CONFIG_USB_GADGET_DEBUG_FILES
-
-static unsigned int fsg_num_buffers = CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS;
-module_param_named(num_buffers, fsg_num_buffers, uint, S_IRUGO);
-MODULE_PARM_DESC(num_buffers, "Number of pipeline buffers");
-
-#else
-
-/*
- * Number of buffers we will use.
- * 2 is usually enough for good buffering pipeline
- */
-#define fsg_num_buffers	CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS
-
-#endif /* CONFIG_USB_GADGET_DEBUG_FILES */
-
-/* check if fsg_num_buffers is within a valid range */
-static inline int fsg_num_buffers_validate(void)
-{
-	if (fsg_num_buffers >= 2 && fsg_num_buffers <= 4)
-		return 0;
-	pr_err("fsg_num_buffers %u is out of range (%d to %d)\n",
-	       fsg_num_buffers, 2 ,4);
-	return -EINVAL;
-}
-
-/* Default size of buffer length. */
-#define FSG_BUFLEN	((u32)16384)
-
-/* Maximal number of LUNs supported in mass storage function */
-#define FSG_MAX_LUNS	8
-
-enum fsg_buffer_state {
-	BUF_STATE_EMPTY = 0,
-	BUF_STATE_FULL,
-	BUF_STATE_BUSY
-};
-
-struct fsg_buffhd {
-	void				*buf;
-	enum fsg_buffer_state		state;
-	struct fsg_buffhd		*next;
-
-	/*
-	 * The NetChip 2280 is faster, and handles some protocol faults
-	 * better, if we don't submit any short bulk-out read requests.
-	 * So we will record the intended request length here.
-	 */
-	unsigned int			bulk_out_intended_length;
-
-	struct usb_request		*inreq;
-	int				inreq_busy;
-	struct usb_request		*outreq;
-	int				outreq_busy;
-};
-
-enum fsg_state {
-	/* This one isn't used anywhere */
-	FSG_STATE_COMMAND_PHASE = -10,
-	FSG_STATE_DATA_PHASE,
-	FSG_STATE_STATUS_PHASE,
-
-	FSG_STATE_IDLE = 0,
-	FSG_STATE_ABORT_BULK_OUT,
-	FSG_STATE_RESET,
-	FSG_STATE_INTERFACE_CHANGE,
-	FSG_STATE_CONFIG_CHANGE,
-	FSG_STATE_DISCONNECT,
-	FSG_STATE_EXIT,
-	FSG_STATE_TERMINATED
-};
-
-enum data_direction {
-	DATA_DIR_UNKNOWN = 0,
-	DATA_DIR_FROM_HOST,
-	DATA_DIR_TO_HOST,
-	DATA_DIR_NONE
-};
-
-
-/*-------------------------------------------------------------------------*/
-
-
-static inline u32 get_unaligned_be24(u8 *buf)
-{
-	return 0xffffff & (u32) get_unaligned_be32(buf - 1);
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-
-enum {
-	FSG_STRING_INTERFACE
-};
-
+#include "storage_common.h"
 
 /* There is only one interface. */
 
-static struct usb_interface_descriptor
-fsg_intf_desc = {
+struct usb_interface_descriptor fsg_intf_desc = {
 	.bLength =		sizeof fsg_intf_desc,
 	.bDescriptorType =	USB_DT_INTERFACE,
 
@@ -268,14 +43,14 @@ fsg_intf_desc = {
 	.bInterfaceProtocol =	USB_PR_BULK,	/* Adjusted during fsg_bind() */
 	.iInterface =		FSG_STRING_INTERFACE,
 };
+EXPORT_SYMBOL(fsg_intf_desc);
 
 /*
  * Three full-speed endpoint descriptors: bulk-in, bulk-out, and
  * interrupt-in.
  */
 
-static struct usb_endpoint_descriptor
-fsg_fs_bulk_in_desc = {
+struct usb_endpoint_descriptor fsg_fs_bulk_in_desc = {
 	.bLength =		USB_DT_ENDPOINT_SIZE,
 	.bDescriptorType =	USB_DT_ENDPOINT,
 
@@ -283,9 +58,9 @@ fsg_fs_bulk_in_desc = {
 	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
 	/* wMaxPacketSize set by autoconfiguration */
 };
+EXPORT_SYMBOL(fsg_fs_bulk_in_desc);
 
-static struct usb_endpoint_descriptor
-fsg_fs_bulk_out_desc = {
+struct usb_endpoint_descriptor fsg_fs_bulk_out_desc = {
 	.bLength =		USB_DT_ENDPOINT_SIZE,
 	.bDescriptorType =	USB_DT_ENDPOINT,
 
@@ -293,13 +68,15 @@ fsg_fs_bulk_out_desc = {
 	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
 	/* wMaxPacketSize set by autoconfiguration */
 };
+EXPORT_SYMBOL(fsg_fs_bulk_out_desc);
 
-static struct usb_descriptor_header *fsg_fs_function[] = {
+struct usb_descriptor_header *fsg_fs_function[] = {
 	(struct usb_descriptor_header *) &fsg_intf_desc,
 	(struct usb_descriptor_header *) &fsg_fs_bulk_in_desc,
 	(struct usb_descriptor_header *) &fsg_fs_bulk_out_desc,
 	NULL,
 };
+EXPORT_SYMBOL(fsg_fs_function);
 
 
 /*
@@ -310,8 +87,7 @@ static struct usb_descriptor_header *fsg_fs_function[] = {
  * and a "device qualifier" ... plus more construction options
  * for the configuration descriptor.
  */
-static struct usb_endpoint_descriptor
-fsg_hs_bulk_in_desc = {
+struct usb_endpoint_descriptor fsg_hs_bulk_in_desc = {
 	.bLength =		USB_DT_ENDPOINT_SIZE,
 	.bDescriptorType =	USB_DT_ENDPOINT,
 
@@ -319,9 +95,9 @@ fsg_hs_bulk_in_desc = {
 	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
 	.wMaxPacketSize =	cpu_to_le16(512),
 };
+EXPORT_SYMBOL(fsg_hs_bulk_in_desc);
 
-static struct usb_endpoint_descriptor
-fsg_hs_bulk_out_desc = {
+struct usb_endpoint_descriptor fsg_hs_bulk_out_desc = {
 	.bLength =		USB_DT_ENDPOINT_SIZE,
 	.bDescriptorType =	USB_DT_ENDPOINT,
 
@@ -330,17 +106,18 @@ fsg_hs_bulk_out_desc = {
 	.wMaxPacketSize =	cpu_to_le16(512),
 	.bInterval =		1,	/* NAK every 1 uframe */
 };
+EXPORT_SYMBOL(fsg_hs_bulk_out_desc);
 
 
-static struct usb_descriptor_header *fsg_hs_function[] = {
+struct usb_descriptor_header *fsg_hs_function[] = {
 	(struct usb_descriptor_header *) &fsg_intf_desc,
 	(struct usb_descriptor_header *) &fsg_hs_bulk_in_desc,
 	(struct usb_descriptor_header *) &fsg_hs_bulk_out_desc,
 	NULL,
 };
+EXPORT_SYMBOL(fsg_hs_function);
 
-static struct usb_endpoint_descriptor
-fsg_ss_bulk_in_desc = {
+struct usb_endpoint_descriptor fsg_ss_bulk_in_desc = {
 	.bLength =		USB_DT_ENDPOINT_SIZE,
 	.bDescriptorType =	USB_DT_ENDPOINT,
 
@@ -348,16 +125,17 @@ fsg_ss_bulk_in_desc = {
 	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
 	.wMaxPacketSize =	cpu_to_le16(1024),
 };
+EXPORT_SYMBOL(fsg_ss_bulk_in_desc);
 
-static struct usb_ss_ep_comp_descriptor fsg_ss_bulk_in_comp_desc = {
+struct usb_ss_ep_comp_descriptor fsg_ss_bulk_in_comp_desc = {
 	.bLength =		sizeof(fsg_ss_bulk_in_comp_desc),
 	.bDescriptorType =	USB_DT_SS_ENDPOINT_COMP,
 
 	/*.bMaxBurst =		DYNAMIC, */
 };
+EXPORT_SYMBOL(fsg_ss_bulk_in_comp_desc);
 
-static struct usb_endpoint_descriptor
-fsg_ss_bulk_out_desc = {
+struct usb_endpoint_descriptor fsg_ss_bulk_out_desc = {
 	.bLength =		USB_DT_ENDPOINT_SIZE,
 	.bDescriptorType =	USB_DT_ENDPOINT,
 
@@ -365,15 +143,17 @@ fsg_ss_bulk_out_desc = {
 	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
 	.wMaxPacketSize =	cpu_to_le16(1024),
 };
+EXPORT_SYMBOL(fsg_ss_bulk_out_desc);
 
-static struct usb_ss_ep_comp_descriptor fsg_ss_bulk_out_comp_desc = {
+struct usb_ss_ep_comp_descriptor fsg_ss_bulk_out_comp_desc = {
 	.bLength =		sizeof(fsg_ss_bulk_in_comp_desc),
 	.bDescriptorType =	USB_DT_SS_ENDPOINT_COMP,
 
 	/*.bMaxBurst =		DYNAMIC, */
 };
+EXPORT_SYMBOL(fsg_ss_bulk_out_comp_desc);
 
-static struct usb_descriptor_header *fsg_ss_function[] = {
+struct usb_descriptor_header *fsg_ss_function[] = {
 	(struct usb_descriptor_header *) &fsg_intf_desc,
 	(struct usb_descriptor_header *) &fsg_ss_bulk_in_desc,
 	(struct usb_descriptor_header *) &fsg_ss_bulk_in_comp_desc,
@@ -381,17 +161,7 @@ static struct usb_descriptor_header *fsg_ss_function[] = {
 	(struct usb_descriptor_header *) &fsg_ss_bulk_out_comp_desc,
 	NULL,
 };
-
-/* Static strings, in UTF-8 (for simplicity we use only ASCII characters) */
-static struct usb_string		fsg_strings[] = {
-	{FSG_STRING_INTERFACE,		fsg_string_interface},
-	{}
-};
-
-static struct usb_gadget_strings	fsg_stringtab = {
-	.language	= 0x0409,		/* en-us */
-	.strings	= fsg_strings,
-};
+EXPORT_SYMBOL(fsg_ss_function);
 
 
  /*-------------------------------------------------------------------------*/
@@ -401,7 +171,7 @@ static struct usb_gadget_strings	fsg_stringtab = {
  * the caller must own fsg->filesem for writing.
  */
 
-static void fsg_lun_close(struct fsg_lun *curlun)
+void fsg_lun_close(struct fsg_lun *curlun)
 {
 	if (curlun->filp) {
 		LDBG(curlun, "close backing file\n");
@@ -409,9 +179,9 @@ static void fsg_lun_close(struct fsg_lun *curlun)
 		curlun->filp = NULL;
 	}
 }
+EXPORT_SYMBOL(fsg_lun_close);
 
-
-static int fsg_lun_open(struct fsg_lun *curlun, const char *filename)
+int fsg_lun_open(struct fsg_lun *curlun, const char *filename)
 {
 	int				ro;
 	struct file			*filp = NULL;
@@ -508,6 +278,7 @@ out:
 	fput(filp);
 	return rc;
 }
+EXPORT_SYMBOL(fsg_lun_open);
 
 
 /*-------------------------------------------------------------------------*/
@@ -516,7 +287,7 @@ out:
  * Sync the file data, don't bother with the metadata.
  * This code was copied from fs/buffer.c:sys_fdatasync().
  */
-static int fsg_lun_fsync_sub(struct fsg_lun *curlun)
+int fsg_lun_fsync_sub(struct fsg_lun *curlun)
 {
 	struct file	*filp = curlun->filp;
 
@@ -524,8 +295,9 @@ static int fsg_lun_fsync_sub(struct fsg_lun *curlun)
 		return 0;
 	return vfs_fsync(filp, 1);
 }
+EXPORT_SYMBOL(fsg_lun_fsync_sub);
 
-static void store_cdrom_address(u8 *dest, int msf, u32 addr)
+void store_cdrom_address(u8 *dest, int msf, u32 addr)
 {
 	if (msf) {
 		/* Convert to Minutes-Seconds-Frames */
@@ -542,34 +314,28 @@ static void store_cdrom_address(u8 *dest, int msf, u32 addr)
 		put_unaligned_be32(addr, dest);
 	}
 }
-
+EXPORT_SYMBOL(store_cdrom_address);
 
 /*-------------------------------------------------------------------------*/
 
 
-static ssize_t ro_show(struct device *dev, struct device_attribute *attr,
-		       char *buf)
+ssize_t fsg_show_ro(struct fsg_lun *curlun, char *buf)
 {
-	struct fsg_lun	*curlun = fsg_lun_from_dev(dev);
-
 	return sprintf(buf, "%d\n", fsg_lun_is_open(curlun)
 				  ? curlun->ro
 				  : curlun->initially_ro);
 }
+EXPORT_SYMBOL(fsg_show_ro);
 
-static ssize_t nofua_show(struct device *dev, struct device_attribute *attr,
-			  char *buf)
+ssize_t fsg_show_nofua(struct fsg_lun *curlun, char *buf)
 {
-	struct fsg_lun	*curlun = fsg_lun_from_dev(dev);
-
 	return sprintf(buf, "%u\n", curlun->nofua);
 }
+EXPORT_SYMBOL(fsg_show_nofua);
 
-static ssize_t file_show(struct device *dev, struct device_attribute *attr,
-			 char *buf)
+ssize_t fsg_show_file(struct fsg_lun *curlun, struct rw_semaphore *filesem,
+		      char *buf)
 {
-	struct fsg_lun	*curlun = fsg_lun_from_dev(dev);
-	struct rw_semaphore	*filesem = dev_get_drvdata(dev);
 	char		*p;
 	ssize_t		rc;
 
@@ -591,17 +357,44 @@ static ssize_t file_show(struct device *dev, struct device_attribute *attr,
 	up_read(filesem);
 	return rc;
 }
+EXPORT_SYMBOL(fsg_show_file);
 
+ssize_t fsg_show_cdrom(struct fsg_lun *curlun, char *buf)
+{
+	return sprintf(buf, "%u\n", curlun->cdrom);
+}
+EXPORT_SYMBOL(fsg_show_cdrom);
 
-static ssize_t ro_store(struct device *dev, struct device_attribute *attr,
-			const char *buf, size_t count)
+ssize_t fsg_show_removable(struct fsg_lun *curlun, char *buf)
+{
+	return sprintf(buf, "%u\n", curlun->removable);
+}
+EXPORT_SYMBOL(fsg_show_removable);
+
+/*
+ * The caller must hold fsg->filesem for reading when calling this function.
+ */
+static ssize_t _fsg_store_ro(struct fsg_lun *curlun, bool ro)
+{
+	if (fsg_lun_is_open(curlun)) {
+		LDBG(curlun, "read-only status change prevented\n");
+		return -EBUSY;
+	}
+
+	curlun->ro = ro;
+	curlun->initially_ro = ro;
+	LDBG(curlun, "read-only status set to %d\n", curlun->ro);
+
+	return 0;
+}
+
+ssize_t fsg_store_ro(struct fsg_lun *curlun, struct rw_semaphore *filesem,
+		     const char *buf, size_t count)
 {
 	ssize_t		rc;
-	struct fsg_lun	*curlun = fsg_lun_from_dev(dev);
-	struct rw_semaphore	*filesem = dev_get_drvdata(dev);
-	unsigned	ro;
+	bool		ro;
 
-	rc = kstrtouint(buf, 2, &ro);
+	rc = strtobool(buf, &ro);
 	if (rc)
 		return rc;
 
@@ -610,27 +403,21 @@ static ssize_t ro_store(struct device *dev, struct device_attribute *attr,
 	 * backing file is closed.
 	 */
 	down_read(filesem);
-	if (fsg_lun_is_open(curlun)) {
-		LDBG(curlun, "read-only status change prevented\n");
-		rc = -EBUSY;
-	} else {
-		curlun->ro = ro;
-		curlun->initially_ro = ro;
-		LDBG(curlun, "read-only status set to %d\n", curlun->ro);
+	rc = _fsg_store_ro(curlun, ro);
+	if (!rc)
 		rc = count;
-	}
 	up_read(filesem);
+
 	return rc;
 }
+EXPORT_SYMBOL(fsg_store_ro);
 
-static ssize_t nofua_store(struct device *dev, struct device_attribute *attr,
-			   const char *buf, size_t count)
+ssize_t fsg_store_nofua(struct fsg_lun *curlun, const char *buf, size_t count)
 {
-	struct fsg_lun	*curlun = fsg_lun_from_dev(dev);
-	unsigned	nofua;
+	bool		nofua;
 	int		ret;
 
-	ret = kstrtouint(buf, 2, &nofua);
+	ret = strtobool(buf, &nofua);
 	if (ret)
 		return ret;
 
@@ -642,12 +429,11 @@ static ssize_t nofua_store(struct device *dev, struct device_attribute *attr,
 
 	return count;
 }
+EXPORT_SYMBOL(fsg_store_nofua);
 
-static ssize_t file_store(struct device *dev, struct device_attribute *attr,
-			  const char *buf, size_t count)
+ssize_t fsg_store_file(struct fsg_lun *curlun, struct rw_semaphore *filesem,
+		       const char *buf, size_t count)
 {
-	struct fsg_lun	*curlun = fsg_lun_from_dev(dev);
-	struct rw_semaphore	*filesem = dev_get_drvdata(dev);
 	int		rc = 0;
 
 	if (curlun->prevent_medium_removal && fsg_lun_is_open(curlun)) {
@@ -674,3 +460,45 @@ static ssize_t file_store(struct device *dev, struct device_attribute *attr,
 	up_write(filesem);
 	return (rc < 0 ? rc : count);
 }
+EXPORT_SYMBOL(fsg_store_file);
+
+ssize_t fsg_store_cdrom(struct fsg_lun *curlun, struct rw_semaphore *filesem,
+			const char *buf, size_t count)
+{
+	bool		cdrom;
+	int		ret;
+
+	ret = strtobool(buf, &cdrom);
+	if (ret)
+		return ret;
+
+	down_read(filesem);
+	ret = cdrom ? _fsg_store_ro(curlun, true) : 0;
+
+	if (!ret) {
+		curlun->cdrom = cdrom;
+		ret = count;
+	}
+	up_read(filesem);
+
+	return ret;
+}
+EXPORT_SYMBOL(fsg_store_cdrom);
+
+ssize_t fsg_store_removable(struct fsg_lun *curlun, const char *buf,
+			    size_t count)
+{
+	bool		removable;
+	int		ret;
+
+	ret = strtobool(buf, &removable);
+	if (ret)
+		return ret;
+
+	curlun->removable = removable;
+
+	return count;
+}
+EXPORT_SYMBOL(fsg_store_removable);
+
+MODULE_LICENSE("GPL");

drivers/usb/gadget/storage_common.h

@@ -0,0 +1,229 @@
+#ifndef USB_STORAGE_COMMON_H
+#define USB_STORAGE_COMMON_H
+
+#include <linux/device.h>
+#include <linux/usb/storage.h>
+#include <scsi/scsi.h>
+#include <asm/unaligned.h>
+
+#ifndef DEBUG
+#undef VERBOSE_DEBUG
+#undef DUMP_MSGS
+#endif /* !DEBUG */
+
+#ifdef VERBOSE_DEBUG
+#define VLDBG	LDBG
+#else
+#define VLDBG(lun, fmt, args...) do { } while (0)
+#endif /* VERBOSE_DEBUG */
+
+#define _LMSG(func, lun, fmt, args...)					\
+	do {								\
+		if ((lun)->name_pfx && *(lun)->name_pfx)		\
+			func("%s/%s: " fmt, *(lun)->name_pfx,		\
+				 (lun)->name, ## args);			\
+		else							\
+			func("%s: " fmt, (lun)->name, ## args);		\
+	} while (0)
+
+#define LDBG(lun, fmt, args...)		_LMSG(pr_debug, lun, fmt, ## args)
+#define LERROR(lun, fmt, args...)	_LMSG(pr_err, lun, fmt, ## args)
+#define LWARN(lun, fmt, args...)	_LMSG(pr_warn, lun, fmt, ## args)
+#define LINFO(lun, fmt, args...)	_LMSG(pr_info, lun, fmt, ## args)
+
+
+#ifdef DUMP_MSGS
+
+#  define dump_msg(fsg, /* const char * */ label,			\
+		   /* const u8 * */ buf, /* unsigned */ length)		\
+do {									\
+	if (length < 512) {						\
+		DBG(fsg, "%s, length %u:\n", label, length);		\
+		print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET,	\
+			       16, 1, buf, length, 0);			\
+	}								\
+} while (0)
+
+#  define dump_cdb(fsg) do { } while (0)
+
+#else
+
+#  define dump_msg(fsg, /* const char * */ label, \
+		   /* const u8 * */ buf, /* unsigned */ length) do { } while (0)
+
+#  ifdef VERBOSE_DEBUG
+
+#    define dump_cdb(fsg)						\
+	print_hex_dump(KERN_DEBUG, "SCSI CDB: ", DUMP_PREFIX_NONE,	\
+		       16, 1, (fsg)->cmnd, (fsg)->cmnd_size, 0)		\
+
+#  else
+
+#    define dump_cdb(fsg) do { } while (0)
+
+#  endif /* VERBOSE_DEBUG */
+
+#endif /* DUMP_MSGS */
+
+/* Length of a SCSI Command Data Block */
+#define MAX_COMMAND_SIZE	16
+
+/* SCSI Sense Key/Additional Sense Code/ASC Qualifier values */
+#define SS_NO_SENSE				0
+#define SS_COMMUNICATION_FAILURE		0x040800
+#define SS_INVALID_COMMAND			0x052000
+#define SS_INVALID_FIELD_IN_CDB			0x052400
+#define SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE	0x052100
+#define SS_LOGICAL_UNIT_NOT_SUPPORTED		0x052500
+#define SS_MEDIUM_NOT_PRESENT			0x023a00
+#define SS_MEDIUM_REMOVAL_PREVENTED		0x055302
+#define SS_NOT_READY_TO_READY_TRANSITION	0x062800
+#define SS_RESET_OCCURRED			0x062900
+#define SS_SAVING_PARAMETERS_NOT_SUPPORTED	0x053900
+#define SS_UNRECOVERED_READ_ERROR		0x031100
+#define SS_WRITE_ERROR				0x030c02
+#define SS_WRITE_PROTECTED			0x072700
+
+#define SK(x)		((u8) ((x) >> 16))	/* Sense Key byte, etc. */
+#define ASC(x)		((u8) ((x) >> 8))
+#define ASCQ(x)		((u8) (x))
+
+struct fsg_lun {
+	struct file	*filp;
+	loff_t		file_length;
+	loff_t		num_sectors;
+
+	unsigned int	initially_ro:1;
+	unsigned int	ro:1;
+	unsigned int	removable:1;
+	unsigned int	cdrom:1;
+	unsigned int	prevent_medium_removal:1;
+	unsigned int	registered:1;
+	unsigned int	info_valid:1;
+	unsigned int	nofua:1;
+
+	u32		sense_data;
+	u32		sense_data_info;
+	u32		unit_attention_data;
+
+	unsigned int	blkbits; /* Bits of logical block size
+						       of bound block device */
+	unsigned int	blksize; /* logical block size of bound block device */
+	struct device	dev;
+	const char	*name;		/* "lun.name" */
+	const char	**name_pfx;	/* "function.name" */
+};
+
+static inline bool fsg_lun_is_open(struct fsg_lun *curlun)
+{
+	return curlun->filp != NULL;
+}
+
+/* Big enough to hold our biggest descriptor */
+#define EP0_BUFSIZE	256
+#define DELAYED_STATUS	(EP0_BUFSIZE + 999)	/* An impossibly large value */
+
+/* Default size of buffer length. */
+#define FSG_BUFLEN	((u32)16384)
+
+/* Maximal number of LUNs supported in mass storage function */
+#define FSG_MAX_LUNS	8
+
+enum fsg_buffer_state {
+	BUF_STATE_EMPTY = 0,
+	BUF_STATE_FULL,
+	BUF_STATE_BUSY
+};
+
+struct fsg_buffhd {
+	void				*buf;
+	enum fsg_buffer_state		state;
+	struct fsg_buffhd		*next;
+
+	/*
+	 * The NetChip 2280 is faster, and handles some protocol faults
+	 * better, if we don't submit any short bulk-out read requests.
+	 * So we will record the intended request length here.
+	 */
+	unsigned int			bulk_out_intended_length;
+
+	struct usb_request		*inreq;
+	int				inreq_busy;
+	struct usb_request		*outreq;
+	int				outreq_busy;
+};
+
+enum fsg_state {
+	/* This one isn't used anywhere */
+	FSG_STATE_COMMAND_PHASE = -10,
+	FSG_STATE_DATA_PHASE,
+	FSG_STATE_STATUS_PHASE,
+
+	FSG_STATE_IDLE = 0,
+	FSG_STATE_ABORT_BULK_OUT,
+	FSG_STATE_RESET,
+	FSG_STATE_INTERFACE_CHANGE,
+	FSG_STATE_CONFIG_CHANGE,
+	FSG_STATE_DISCONNECT,
+	FSG_STATE_EXIT,
+	FSG_STATE_TERMINATED
+};
+
+enum data_direction {
+	DATA_DIR_UNKNOWN = 0,
+	DATA_DIR_FROM_HOST,
+	DATA_DIR_TO_HOST,
+	DATA_DIR_NONE
+};
+
+static inline u32 get_unaligned_be24(u8 *buf)
+{
+	return 0xffffff & (u32) get_unaligned_be32(buf - 1);
+}
+
+static inline struct fsg_lun *fsg_lun_from_dev(struct device *dev)
+{
+	return container_of(dev, struct fsg_lun, dev);
+}
+
+enum {
+	FSG_STRING_INTERFACE
+};
+
+extern struct usb_interface_descriptor fsg_intf_desc;
+
+extern struct usb_endpoint_descriptor fsg_fs_bulk_in_desc;
+extern struct usb_endpoint_descriptor fsg_fs_bulk_out_desc;
+extern struct usb_descriptor_header *fsg_fs_function[];
+
+extern struct usb_endpoint_descriptor fsg_hs_bulk_in_desc;
+extern struct usb_endpoint_descriptor fsg_hs_bulk_out_desc;
+extern struct usb_descriptor_header *fsg_hs_function[];
+
+extern struct usb_endpoint_descriptor fsg_ss_bulk_in_desc;
+extern struct usb_ss_ep_comp_descriptor fsg_ss_bulk_in_comp_desc;
+extern struct usb_endpoint_descriptor fsg_ss_bulk_out_desc;
+extern struct usb_ss_ep_comp_descriptor fsg_ss_bulk_out_comp_desc;
+extern struct usb_descriptor_header *fsg_ss_function[];
+
+void fsg_lun_close(struct fsg_lun *curlun);
+int fsg_lun_open(struct fsg_lun *curlun, const char *filename);
+int fsg_lun_fsync_sub(struct fsg_lun *curlun);
+void store_cdrom_address(u8 *dest, int msf, u32 addr);
+ssize_t fsg_show_ro(struct fsg_lun *curlun, char *buf);
+ssize_t fsg_show_nofua(struct fsg_lun *curlun, char *buf);
+ssize_t fsg_show_file(struct fsg_lun *curlun, struct rw_semaphore *filesem,
+		      char *buf);
+ssize_t fsg_show_cdrom(struct fsg_lun *curlun, char *buf);
+ssize_t fsg_show_removable(struct fsg_lun *curlun, char *buf);
+ssize_t fsg_store_ro(struct fsg_lun *curlun, struct rw_semaphore *filesem,
+		     const char *buf, size_t count);
+ssize_t fsg_store_nofua(struct fsg_lun *curlun, const char *buf, size_t count);
+ssize_t fsg_store_file(struct fsg_lun *curlun, struct rw_semaphore *filesem,
+		       const char *buf, size_t count);
+ssize_t fsg_store_cdrom(struct fsg_lun *curlun, struct rw_semaphore *filesem,
+			const char *buf, size_t count);
+ssize_t fsg_store_removable(struct fsg_lun *curlun, const char *buf,
+			    size_t count);
+
+#endif /* USB_STORAGE_COMMON_H */

drivers/usb/gadget/udc-core.c

@@ -356,7 +356,8 @@ static int udc_bind_to_driver(struct usb_udc *udc, struct usb_gadget_driver *dri
 	kobject_uevent(&udc->dev.kobj, KOBJ_CHANGE);
 	return 0;
 err1:
-	dev_err(&udc->dev, "failed to start %s: %d\n",
+	if (ret != -EISNAM)
+		dev_err(&udc->dev, "failed to start %s: %d\n",
 			udc->driver->function, ret);
 	udc->driver = NULL;
 	udc->dev.driver = NULL;

drivers/usb/gadget/zero.c

@@ -95,6 +95,18 @@ unsigned autoresume = DEFAULT_AUTORESUME;
 module_param(autoresume, uint, S_IRUGO);
 MODULE_PARM_DESC(autoresume, "zero, or seconds before remote wakeup");
 
+/* Maximum Autoresume time */
+unsigned max_autoresume;
+module_param(max_autoresume, uint, S_IRUGO);
+MODULE_PARM_DESC(max_autoresume, "maximum seconds before remote wakeup");
+
+/* Interval between two remote wakeups */
+unsigned autoresume_interval_ms;
+module_param(autoresume_interval_ms, uint, S_IRUGO);
+MODULE_PARM_DESC(autoresume_interval_ms,
+		"milliseconds to increase successive wakeup delays");
+
+static unsigned autoresume_step_ms;
 /*-------------------------------------------------------------------------*/
 
 static struct usb_device_descriptor device_desc = {
@@ -183,8 +195,16 @@ static void zero_suspend(struct usb_composite_dev *cdev)
 		return;
 
 	if (autoresume) {
-		mod_timer(&autoresume_timer, jiffies + (HZ * autoresume));
-		DBG(cdev, "suspend, wakeup in %d seconds\n", autoresume);
+		if (max_autoresume &&
+			(autoresume_step_ms > max_autoresume * 1000))
+				autoresume_step_ms = autoresume * 1000;
+
+		mod_timer(&autoresume_timer, jiffies +
+			msecs_to_jiffies(autoresume_step_ms));
+		DBG(cdev, "suspend, wakeup in %d milliseconds\n",
+			autoresume_step_ms);
+
+		autoresume_step_ms += autoresume_interval_ms;
 	} else
 		DBG(cdev, "%s\n", __func__);
 }
@@ -316,6 +336,7 @@ static int __init zero_bind(struct usb_composite_dev *cdev)
 	if (autoresume) {
 		sourcesink_driver.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
 		loopback_driver.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
+		autoresume_step_ms = autoresume * 1000;
 	}
 
 	/* support OTG systems */

drivers/usb/musb/Kconfig

@@ -91,7 +91,7 @@ config USB_MUSB_BLACKFIN
 	depends on (BF54x && !BF544) || (BF52x && ! BF522 && !BF523)
 
 config USB_MUSB_UX500
-	tristate "U8500 and U5500"
+	tristate "Ux500 platforms"
 
 endchoice
 
@@ -113,7 +113,7 @@ choice
 	  allow using DMA on multiplatform kernels.
 
 config USB_UX500_DMA
-	bool 'ST Ericsson U8500 and U5500'
+	bool 'ST Ericsson Ux500'
 	depends on USB_MUSB_UX500
 	help
 	  Enable DMA transfers on UX500 platforms.

drivers/usb/musb/am35x.c

@@ -89,7 +89,6 @@ struct am35x_glue {
 	struct clk		*phy_clk;
 	struct clk		*clk;
 };
-#define glue_to_musb(g)		platform_get_drvdata(g->musb)
 
 /*
  * am35x_musb_enable - enable interrupts
@@ -452,14 +451,18 @@ static const struct musb_platform_ops am35x_ops = {
 	.set_vbus	= am35x_musb_set_vbus,
 };
 
-static u64 am35x_dmamask = DMA_BIT_MASK(32);
+static const struct platform_device_info am35x_dev_info = {
+	.name		= "musb-hdrc",
+	.id		= PLATFORM_DEVID_AUTO,
+	.dma_mask	= DMA_BIT_MASK(32),
+};
 
 static int am35x_probe(struct platform_device *pdev)
 {
 	struct musb_hdrc_platform_data	*pdata = dev_get_platdata(&pdev->dev);
 	struct platform_device		*musb;
 	struct am35x_glue		*glue;
-
+	struct platform_device_info	pinfo;
 	struct clk			*phy_clk;
 	struct clk			*clk;
 
@@ -471,12 +474,6 @@ static int am35x_probe(struct platform_device *pdev)
 		goto err0;
 	}
 
-	musb = platform_device_alloc("musb-hdrc", PLATFORM_DEVID_AUTO);
-	if (!musb) {
-		dev_err(&pdev->dev, "failed to allocate musb device\n");
-		goto err1;
-	}
-
 	phy_clk = clk_get(&pdev->dev, "fck");
 	if (IS_ERR(phy_clk)) {
 		dev_err(&pdev->dev, "failed to get PHY clock\n");
@@ -503,12 +500,7 @@ static int am35x_probe(struct platform_device *pdev)
 		goto err6;
 	}
 
-	musb->dev.parent		= &pdev->dev;
-	musb->dev.dma_mask		= &am35x_dmamask;
-	musb->dev.coherent_dma_mask	= am35x_dmamask;
-
 	glue->dev			= &pdev->dev;
-	glue->musb			= musb;
 	glue->phy_clk			= phy_clk;
 	glue->clk			= clk;
 
@@ -516,22 +508,17 @@ static int am35x_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, glue);
 
-	ret = platform_device_add_resources(musb, pdev->resource,
-			pdev->num_resources);
-	if (ret) {
-		dev_err(&pdev->dev, "failed to add resources\n");
-		goto err7;
-	}
-
-	ret = platform_device_add_data(musb, pdata, sizeof(*pdata));
-	if (ret) {
-		dev_err(&pdev->dev, "failed to add platform_data\n");
-		goto err7;
-	}
-
-	ret = platform_device_add(musb);
-	if (ret) {
-		dev_err(&pdev->dev, "failed to register musb device\n");
+	pinfo = am35x_dev_info;
+	pinfo.parent = &pdev->dev;
+	pinfo.res = pdev->resource;
+	pinfo.num_res = pdev->num_resources;
+	pinfo.data = pdata;
+	pinfo.size_data = sizeof(*pdata);
+
+	glue->musb = musb = platform_device_register_full(&pinfo);
+	if (IS_ERR(musb)) {
+		ret = PTR_ERR(musb);
+		dev_err(&pdev->dev, "failed to register musb device: %d\n", ret);
 		goto err7;
 	}
 
@@ -550,9 +537,6 @@ err4:
 	clk_put(phy_clk);
 
 err3:
-	platform_device_put(musb);
-
-err1:
 	kfree(glue);
 
 err0:
@@ -615,23 +599,16 @@ static int am35x_resume(struct device *dev)
 
 	return 0;
 }
-
-static struct dev_pm_ops am35x_pm_ops = {
-	.suspend	= am35x_suspend,
-	.resume		= am35x_resume,
-};
-
-#define DEV_PM_OPS	&am35x_pm_ops
-#else
-#define DEV_PM_OPS	NULL
 #endif
 
+static SIMPLE_DEV_PM_OPS(am35x_pm_ops, am35x_suspend, am35x_resume);
+
 static struct platform_driver am35x_driver = {
 	.probe		= am35x_probe,
 	.remove		= am35x_remove,
 	.driver		= {
 		.name	= "musb-am35x",
-		.pm	= DEV_PM_OPS,
+		.pm	= &am35x_pm_ops,
 	},
 };
 

drivers/usb/musb/blackfin.c

@@ -561,23 +561,16 @@ static int bfin_resume(struct device *dev)
 
 	return 0;
 }
-
-static struct dev_pm_ops bfin_pm_ops = {
-	.suspend	= bfin_suspend,
-	.resume		= bfin_resume,
-};
-
-#define DEV_PM_OPS	&bfin_pm_ops
-#else
-#define DEV_PM_OPS	NULL
 #endif
 
+static SIMPLE_DEV_PM_OPS(bfin_pm_ops, bfin_suspend, bfin_resume);
+
 static struct platform_driver bfin_driver = {
 	.probe		= bfin_probe,
 	.remove		= __exit_p(bfin_remove),
 	.driver		= {
 		.name	= "musb-blackfin",
-		.pm	= DEV_PM_OPS,
+		.pm	= &bfin_pm_ops,
 	},
 };
 

drivers/usb/musb/da8xx.c

@@ -472,7 +472,11 @@ static const struct musb_platform_ops da8xx_ops = {
 	.set_vbus	= da8xx_musb_set_vbus,
 };
 
-static u64 da8xx_dmamask = DMA_BIT_MASK(32);
+static const struct platform_device_info da8xx_dev_info = {
+	.name		= "musb-hdrc",
+	.id		= PLATFORM_DEVID_AUTO,
+	.dma_mask	= DMA_BIT_MASK(32),
+};
 
 static int da8xx_probe(struct platform_device *pdev)
 {
@@ -480,7 +484,7 @@ static int da8xx_probe(struct platform_device *pdev)
 	struct musb_hdrc_platform_data	*pdata = dev_get_platdata(&pdev->dev);
 	struct platform_device		*musb;
 	struct da8xx_glue		*glue;
-
+	struct platform_device_info	pinfo;
 	struct clk			*clk;
 
 	int				ret = -ENOMEM;
@@ -491,12 +495,6 @@ static int da8xx_probe(struct platform_device *pdev)
 		goto err0;
 	}
 
-	musb = platform_device_alloc("musb-hdrc", PLATFORM_DEVID_AUTO);
-	if (!musb) {
-		dev_err(&pdev->dev, "failed to allocate musb device\n");
-		goto err1;
-	}
-
 	clk = clk_get(&pdev->dev, "usb20");
 	if (IS_ERR(clk)) {
 		dev_err(&pdev->dev, "failed to get clock\n");
@@ -510,12 +508,7 @@ static int da8xx_probe(struct platform_device *pdev)
 		goto err4;
 	}
 
-	musb->dev.parent		= &pdev->dev;
-	musb->dev.dma_mask		= &da8xx_dmamask;
-	musb->dev.coherent_dma_mask	= da8xx_dmamask;
-
 	glue->dev			= &pdev->dev;
-	glue->musb			= musb;
 	glue->clk			= clk;
 
 	pdata->platform_ops		= &da8xx_ops;
@@ -535,22 +528,17 @@ static int da8xx_probe(struct platform_device *pdev)
 	musb_resources[1].end = pdev->resource[1].end;
 	musb_resources[1].flags = pdev->resource[1].flags;
 
-	ret = platform_device_add_resources(musb, musb_resources,
-			ARRAY_SIZE(musb_resources));
-	if (ret) {
-		dev_err(&pdev->dev, "failed to add resources\n");
-		goto err5;
-	}
-
-	ret = platform_device_add_data(musb, pdata, sizeof(*pdata));
-	if (ret) {
-		dev_err(&pdev->dev, "failed to add platform_data\n");
-		goto err5;
-	}
-
-	ret = platform_device_add(musb);
-	if (ret) {
-		dev_err(&pdev->dev, "failed to register musb device\n");
+	pinfo = da8xx_dev_info;
+	pinfo.parent = &pdev->dev;
+	pinfo.res = musb_resources;
+	pinfo.num_res = ARRAY_SIZE(musb_resources);
+	pinfo.data = pdata;
+	pinfo.size_data = sizeof(*pdata);
+
+	glue->musb = musb = platform_device_register_full(&pinfo);
+	if (IS_ERR(musb)) {
+		ret = PTR_ERR(musb);
+		dev_err(&pdev->dev, "failed to register musb device: %d\n", ret);
 		goto err5;
 	}
 
@@ -563,9 +551,6 @@ err4:
 	clk_put(clk);
 
 err3:
-	platform_device_put(musb);
-
-err1:
 	kfree(glue);
 
 err0:

drivers/usb/musb/davinci.c

@@ -505,14 +505,19 @@ static const struct musb_platform_ops davinci_ops = {
 	.set_vbus	= davinci_musb_set_vbus,
 };
 
-static u64 davinci_dmamask = DMA_BIT_MASK(32);
+static const struct platform_device_info davinci_dev_info = {
+	.name		= "musb-hdrc",
+	.id		= PLATFORM_DEVID_AUTO,
+	.dma_mask	= DMA_BIT_MASK(32),
+};
 
 static int davinci_probe(struct platform_device *pdev)
 {
-	struct resource musb_resources[2];
+	struct resource			musb_resources[3];
 	struct musb_hdrc_platform_data	*pdata = dev_get_platdata(&pdev->dev);
 	struct platform_device		*musb;
 	struct davinci_glue		*glue;
+	struct platform_device_info	pinfo;
 	struct clk			*clk;
 
 	int				ret = -ENOMEM;
@@ -523,12 +528,6 @@ static int davinci_probe(struct platform_device *pdev)
 		goto err0;
 	}
 
-	musb = platform_device_alloc("musb-hdrc", PLATFORM_DEVID_AUTO);
-	if (!musb) {
-		dev_err(&pdev->dev, "failed to allocate musb device\n");
-		goto err1;
-	}
-
 	clk = clk_get(&pdev->dev, "usb");
 	if (IS_ERR(clk)) {
 		dev_err(&pdev->dev, "failed to get clock\n");
@@ -542,12 +541,7 @@ static int davinci_probe(struct platform_device *pdev)
 		goto err4;
 	}
 
-	musb->dev.parent		= &pdev->dev;
-	musb->dev.dma_mask		= &davinci_dmamask;
-	musb->dev.coherent_dma_mask	= davinci_dmamask;
-
 	glue->dev			= &pdev->dev;
-	glue->musb			= musb;
 	glue->clk			= clk;
 
 	pdata->platform_ops		= &davinci_ops;
@@ -567,22 +561,26 @@ static int davinci_probe(struct platform_device *pdev)
 	musb_resources[1].end = pdev->resource[1].end;
 	musb_resources[1].flags = pdev->resource[1].flags;
 
-	ret = platform_device_add_resources(musb, musb_resources,
-			ARRAY_SIZE(musb_resources));
-	if (ret) {
-		dev_err(&pdev->dev, "failed to add resources\n");
-		goto err5;
-	}
-
-	ret = platform_device_add_data(musb, pdata, sizeof(*pdata));
-	if (ret) {
-		dev_err(&pdev->dev, "failed to add platform_data\n");
-		goto err5;
-	}
-
-	ret = platform_device_add(musb);
-	if (ret) {
-		dev_err(&pdev->dev, "failed to register musb device\n");
+	/*
+	 * For DM6467 3 resources are passed. A placeholder for the 3rd
+	 * resource is always there, so it's safe to always copy it...
+	 */
+	musb_resources[2].name = pdev->resource[2].name;
+	musb_resources[2].start = pdev->resource[2].start;
+	musb_resources[2].end = pdev->resource[2].end;
+	musb_resources[2].flags = pdev->resource[2].flags;
+
+	pinfo = davinci_dev_info;
+	pinfo.parent = &pdev->dev;
+	pinfo.res = musb_resources;
+	pinfo.num_res = ARRAY_SIZE(musb_resources);
+	pinfo.data = pdata;
+	pinfo.size_data = sizeof(*pdata);
+
+	glue->musb = musb = platform_device_register_full(&pinfo);
+	if (IS_ERR(musb)) {
+		ret = PTR_ERR(musb);
+		dev_err(&pdev->dev, "failed to register musb device: %d\n", ret);
 		goto err5;
 	}
 
@@ -595,9 +593,6 @@ err4:
 	clk_put(clk);
 
 err3:
-	platform_device_put(musb);
-
-err1:
 	kfree(glue);
 
 err0:

drivers/usb/musb/musb_am335x.c

@@ -46,7 +46,7 @@ static struct platform_driver am335x_child_driver = {
 	.remove         = am335x_child_remove,
 	.driver         = {
 		.name   = "am335x-usb-childs",
-		.of_match_table	= of_match_ptr(am335x_child_of_match),
+		.of_match_table	= am335x_child_of_match,
 	},
 };
 

drivers/usb/musb/musb_core.c

@@ -1809,8 +1809,7 @@ static void musb_free(struct musb *musb)
 			disable_irq_wake(musb->nIrq);
 		free_irq(musb->nIrq, musb);
 	}
-	if (musb->dma_controller)
-		dma_controller_destroy(musb->dma_controller);
+	cancel_work_sync(&musb->irq_work);
 
 	musb_host_free(musb);
 }
@@ -1885,8 +1884,13 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
 
 	pm_runtime_get_sync(musb->controller);
 
-	if (use_dma && dev->dma_mask)
+	if (use_dma && dev->dma_mask) {
 		musb->dma_controller = dma_controller_create(musb, musb->mregs);
+		if (IS_ERR(musb->dma_controller)) {
+			status = PTR_ERR(musb->dma_controller);
+			goto fail2_5;
+		}
+	}
 
 	/* be sure interrupts are disabled before connecting ISR */
 	musb_platform_disable(musb);
@@ -1946,6 +1950,8 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
 		if (status < 0)
 			goto fail3;
 		status = musb_gadget_setup(musb);
+		if (status)
+			musb_host_cleanup(musb);
 		break;
 	default:
 		dev_err(dev, "unsupported port mode %d\n", musb->port_mode);
@@ -1972,10 +1978,12 @@ fail5:
 
 fail4:
 	musb_gadget_cleanup(musb);
+	musb_host_cleanup(musb);
 
 fail3:
 	if (musb->dma_controller)
 		dma_controller_destroy(musb->dma_controller);
+fail2_5:
 	pm_runtime_put_sync(musb->controller);
 
 fail2:
@@ -2032,6 +2040,9 @@ static int musb_remove(struct platform_device *pdev)
 	musb_exit_debugfs(musb);
 	musb_shutdown(pdev);
 
+	if (musb->dma_controller)
+		dma_controller_destroy(musb->dma_controller);
+
 	musb_free(musb);
 	device_init_wakeup(dev, 0);
 	return 0;

drivers/usb/musb/musb_cppi41.c

@@ -484,6 +484,7 @@ static int cppi41_dma_controller_start(struct cppi41_dma_controller *controller)
 		if (ret)
 			goto err;
 
+		ret = -EINVAL;
 		if (port > MUSB_DMA_NUM_CHANNELS || !port)
 			goto err;
 		if (is_tx)
@@ -503,6 +504,7 @@ static int cppi41_dma_controller_start(struct cppi41_dma_controller *controller)
 		dc = dma_request_slave_channel(dev, str);
 		if (!dc) {
 			dev_err(dev, "Falied to request %s.\n", str);
+			ret = -EPROBE_DEFER;
 			goto err;
 		}
 		cppi41_channel->dc = dc;
@@ -510,7 +512,7 @@ static int cppi41_dma_controller_start(struct cppi41_dma_controller *controller)
 	return 0;
 err:
 	cppi41_release_all_dma_chans(controller);
-	return -EINVAL;
+	return ret;
 }
 
 void dma_controller_destroy(struct dma_controller *c)
@@ -526,7 +528,7 @@ struct dma_controller *dma_controller_create(struct musb *musb,
 					void __iomem *base)
 {
 	struct cppi41_dma_controller *controller;
-	int ret;
+	int ret = 0;
 
 	if (!musb->controller->of_node) {
 		dev_err(musb->controller, "Need DT for the DMA engine.\n");
@@ -553,5 +555,7 @@ struct dma_controller *dma_controller_create(struct musb *musb,
 plat_get_fail:
 	kfree(controller);
 kzalloc_fail:
+	if (ret == -EPROBE_DEFER)
+		return ERR_PTR(ret);
 	return NULL;
 }

drivers/usb/musb/musb_dsps.c

@@ -121,6 +121,43 @@ struct dsps_glue {
 	unsigned long last_timer;    /* last timer data for each instance */
 };
 
+static void dsps_musb_try_idle(struct musb *musb, unsigned long timeout)
+{
+	struct device *dev = musb->controller;
+	struct dsps_glue *glue = dev_get_drvdata(dev->parent);
+
+	if (timeout == 0)
+		timeout = jiffies + msecs_to_jiffies(3);
+
+	/* Never idle if active, or when VBUS timeout is not set as host */
+	if (musb->is_active || (musb->a_wait_bcon == 0 &&
+				musb->xceiv->state == OTG_STATE_A_WAIT_BCON)) {
+		dev_dbg(musb->controller, "%s active, deleting timer\n",
+				usb_otg_state_string(musb->xceiv->state));
+		del_timer(&glue->timer);
+		glue->last_timer = jiffies;
+		return;
+	}
+	if (musb->port_mode != MUSB_PORT_MODE_DUAL_ROLE)
+		return;
+
+	if (!musb->g.dev.driver)
+		return;
+
+	if (time_after(glue->last_timer, timeout) &&
+				timer_pending(&glue->timer)) {
+		dev_dbg(musb->controller,
+			"Longer idle timer already pending, ignoring...\n");
+		return;
+	}
+	glue->last_timer = timeout;
+
+	dev_dbg(musb->controller, "%s inactive, starting idle timer for %u ms\n",
+		usb_otg_state_string(musb->xceiv->state),
+			jiffies_to_msecs(timeout - jiffies));
+	mod_timer(&glue->timer, timeout);
+}
+
 /**
  * dsps_musb_enable - enable interrupts
  */
@@ -143,6 +180,7 @@ static void dsps_musb_enable(struct musb *musb)
 	/* Force the DRVVBUS IRQ so we can start polling for ID change. */
 	dsps_writel(reg_base, wrp->coreintr_set,
 		    (1 << wrp->drvvbus) << wrp->usb_shift);
+	dsps_musb_try_idle(musb, 0);
 }
 
 /**
@@ -171,6 +209,7 @@ static void otg_timer(unsigned long _musb)
 	const struct dsps_musb_wrapper *wrp = glue->wrp;
 	u8 devctl;
 	unsigned long flags;
+	int skip_session = 0;
 
 	/*
 	 * We poll because DSPS IP's won't expose several OTG-critical
@@ -183,10 +222,12 @@ static void otg_timer(unsigned long _musb)
 	spin_lock_irqsave(&musb->lock, flags);
 	switch (musb->xceiv->state) {
 	case OTG_STATE_A_WAIT_BCON:
-		devctl &= ~MUSB_DEVCTL_SESSION;
-		dsps_writeb(musb->mregs, MUSB_DEVCTL, devctl);
+		dsps_writeb(musb->mregs, MUSB_DEVCTL, 0);
+		skip_session = 1;
+		/* fall */
 
-		devctl = dsps_readb(musb->mregs, MUSB_DEVCTL);
+	case OTG_STATE_A_IDLE:
+	case OTG_STATE_B_IDLE:
 		if (devctl & MUSB_DEVCTL_BDEVICE) {
 			musb->xceiv->state = OTG_STATE_B_IDLE;
 			MUSB_DEV_MODE(musb);
@@ -194,60 +235,21 @@ static void otg_timer(unsigned long _musb)
 			musb->xceiv->state = OTG_STATE_A_IDLE;
 			MUSB_HST_MODE(musb);
 		}
+		if (!(devctl & MUSB_DEVCTL_SESSION) && !skip_session)
+			dsps_writeb(mregs, MUSB_DEVCTL, MUSB_DEVCTL_SESSION);
+		mod_timer(&glue->timer, jiffies + wrp->poll_seconds * HZ);
 		break;
 	case OTG_STATE_A_WAIT_VFALL:
 		musb->xceiv->state = OTG_STATE_A_WAIT_VRISE;
 		dsps_writel(musb->ctrl_base, wrp->coreintr_set,
 			    MUSB_INTR_VBUSERROR << wrp->usb_shift);
 		break;
-	case OTG_STATE_B_IDLE:
-		devctl = dsps_readb(mregs, MUSB_DEVCTL);
-		if (devctl & MUSB_DEVCTL_BDEVICE)
-			mod_timer(&glue->timer,
-					jiffies + wrp->poll_seconds * HZ);
-		else
-			musb->xceiv->state = OTG_STATE_A_IDLE;
-		break;
 	default:
 		break;
 	}
 	spin_unlock_irqrestore(&musb->lock, flags);
 }
 
-static void dsps_musb_try_idle(struct musb *musb, unsigned long timeout)
-{
-	struct device *dev = musb->controller;
-	struct dsps_glue *glue = dev_get_drvdata(dev->parent);
-
-	if (timeout == 0)
-		timeout = jiffies + msecs_to_jiffies(3);
-
-	/* Never idle if active, or when VBUS timeout is not set as host */
-	if (musb->is_active || (musb->a_wait_bcon == 0 &&
-				musb->xceiv->state == OTG_STATE_A_WAIT_BCON)) {
-		dev_dbg(musb->controller, "%s active, deleting timer\n",
-				usb_otg_state_string(musb->xceiv->state));
-		del_timer(&glue->timer);
-		glue->last_timer = jiffies;
-		return;
-	}
-	if (musb->port_mode == MUSB_PORT_MODE_HOST)
-		return;
-
-	if (time_after(glue->last_timer, timeout) &&
-				timer_pending(&glue->timer)) {
-		dev_dbg(musb->controller,
-			"Longer idle timer already pending, ignoring...\n");
-		return;
-	}
-	glue->last_timer = timeout;
-
-	dev_dbg(musb->controller, "%s inactive, starting idle timer for %u ms\n",
-		usb_otg_state_string(musb->xceiv->state),
-			jiffies_to_msecs(timeout - jiffies));
-	mod_timer(&glue->timer, timeout);
-}
-
 static irqreturn_t dsps_interrupt(int irq, void *hci)
 {
 	struct musb  *musb = hci;
@@ -631,7 +633,7 @@ static struct platform_driver dsps_usbss_driver = {
 	.remove         = dsps_remove,
 	.driver         = {
 		.name   = "musb-dsps",
-		.of_match_table	= of_match_ptr(musb_dsps_of_match),
+		.of_match_table	= musb_dsps_of_match,
 	},
 };
 

drivers/usb/musb/musb_virthub.c

@@ -220,6 +220,23 @@ int musb_hub_status_data(struct usb_hcd *hcd, char *buf)
 	return retval;
 }
 
+static int musb_has_gadget(struct musb *musb)
+{
+	/*
+	 * In host-only mode we start a connection right away. In OTG mode
+	 * we have to wait until we loaded a gadget. We don't really need a
+	 * gadget if we operate as a host but we should not start a session
+	 * as a device without a gadget or else we explode.
+	 */
+#ifdef CONFIG_USB_MUSB_HOST
+	return 1;
+#else
+	if (musb->port_mode == MUSB_PORT_MODE_HOST)
+		return 1;
+	return musb->g.dev.driver != NULL;
+#endif
+}
+
 int musb_hub_control(
 	struct usb_hcd	*hcd,
 	u16		typeReq,
@@ -362,7 +379,7 @@ int musb_hub_control(
 			 * initialization logic, e.g. for OTG, or change any
 			 * logic relating to VBUS power-up.
 			 */
-			if (!hcd->self.is_b_host)
+			if (!hcd->self.is_b_host && musb_has_gadget(musb))
 				musb_start(musb);
 			break;
 		case USB_PORT_FEAT_RESET:

drivers/usb/musb/omap2430.c

@@ -306,6 +306,9 @@ static void omap_musb_set_mailbox(struct omap2430_glue *glue)
 	default:
 		dev_dbg(dev, "ID float\n");
 	}
+
+	atomic_notifier_call_chain(&musb->xceiv->notifier,
+			musb->xceiv->last_event, NULL);
 }
 
 

drivers/usb/musb/tusb6010.c

@@ -1152,7 +1152,11 @@ static const struct musb_platform_ops tusb_ops = {
 	.set_vbus	= tusb_musb_set_vbus,
 };
 
-static u64 tusb_dmamask = DMA_BIT_MASK(32);
+static const struct platform_device_info tusb_dev_info = {
+	.name		= "musb-hdrc",
+	.id		= PLATFORM_DEVID_AUTO,
+	.dma_mask	= DMA_BIT_MASK(32),
+};
 
 static int tusb_probe(struct platform_device *pdev)
 {
@@ -1160,7 +1164,7 @@ static int tusb_probe(struct platform_device *pdev)
 	struct musb_hdrc_platform_data	*pdata = dev_get_platdata(&pdev->dev);
 	struct platform_device		*musb;
 	struct tusb6010_glue		*glue;
-
+	struct platform_device_info	pinfo;
 	int				ret = -ENOMEM;
 
 	glue = kzalloc(sizeof(*glue), GFP_KERNEL);
@@ -1169,18 +1173,7 @@ static int tusb_probe(struct platform_device *pdev)
 		goto err0;
 	}
 
-	musb = platform_device_alloc("musb-hdrc", PLATFORM_DEVID_AUTO);
-	if (!musb) {
-		dev_err(&pdev->dev, "failed to allocate musb device\n");
-		goto err1;
-	}
-
-	musb->dev.parent		= &pdev->dev;
-	musb->dev.dma_mask		= &tusb_dmamask;
-	musb->dev.coherent_dma_mask	= tusb_dmamask;
-
 	glue->dev			= &pdev->dev;
-	glue->musb			= musb;
 
 	pdata->platform_ops		= &tusb_ops;
 
@@ -1204,31 +1197,23 @@ static int tusb_probe(struct platform_device *pdev)
 	musb_resources[2].end = pdev->resource[2].end;
 	musb_resources[2].flags = pdev->resource[2].flags;
 
-	ret = platform_device_add_resources(musb, musb_resources,
-			ARRAY_SIZE(musb_resources));
-	if (ret) {
-		dev_err(&pdev->dev, "failed to add resources\n");
-		goto err3;
-	}
-
-	ret = platform_device_add_data(musb, pdata, sizeof(*pdata));
-	if (ret) {
-		dev_err(&pdev->dev, "failed to add platform_data\n");
-		goto err3;
-	}
-
-	ret = platform_device_add(musb);
-	if (ret) {
-		dev_err(&pdev->dev, "failed to register musb device\n");
+	pinfo = tusb_dev_info;
+	pinfo.parent = &pdev->dev;
+	pinfo.res = musb_resources;
+	pinfo.num_res = ARRAY_SIZE(musb_resources);
+	pinfo.data = pdata;
+	pinfo.size_data = sizeof(*pdata);
+
+	glue->musb = musb = platform_device_register_full(&pinfo);
+	if (IS_ERR(musb)) {
+		ret = PTR_ERR(musb);
+		dev_err(&pdev->dev, "failed to register musb device: %d\n", ret);
 		goto err3;
 	}
 
 	return 0;
 
 err3:
-	platform_device_put(musb);
-
-err1:
 	kfree(glue);
 
 err0:

drivers/usb/musb/ux500.c

@@ -376,17 +376,10 @@ static int ux500_resume(struct device *dev)
 
 	return 0;
 }
-
-static const struct dev_pm_ops ux500_pm_ops = {
-	.suspend	= ux500_suspend,
-	.resume		= ux500_resume,
-};
-
-#define DEV_PM_OPS	(&ux500_pm_ops)
-#else
-#define DEV_PM_OPS	NULL
 #endif
 
+static SIMPLE_DEV_PM_OPS(ux500_pm_ops, ux500_suspend, ux500_resume);
+
 static const struct of_device_id ux500_match[] = {
         { .compatible = "stericsson,db8500-musb", },
         {}
@@ -397,7 +390,7 @@ static struct platform_driver ux500_driver = {
 	.remove		= ux500_remove,
 	.driver		= {
 		.name	= "musb-ux500",
-		.pm	= DEV_PM_OPS,
+		.pm	= &ux500_pm_ops,
 		.of_match_table = ux500_match,
 	},
 };

drivers/usb/phy/Kconfig

@@ -194,6 +194,19 @@ config USB_RCAR_PHY
 	  To compile this driver as a module, choose M here: the
 	  module will be called phy-rcar-usb.
 
+config USB_RCAR_GEN2_PHY
+	tristate "Renesas R-Car Gen2 USB PHY support"
+	depends on ARCH_R8A7790 || ARCH_R8A7791 || COMPILE_TEST
+	select USB_PHY
+	help
+	  Say Y here to add support for the Renesas R-Car Gen2 USB PHY driver.
+	  It is typically used to control internal USB PHY for USBHS,
+	  and to configure shared USB channels 0 and 2.
+	  This driver supports R8A7790 and R8A7791.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called phy-rcar-gen2-usb.
+
 config USB_ULPI
 	bool "Generic ULPI Transceiver Driver"
 	depends on ARM

drivers/usb/phy/Makefile

@@ -27,5 +27,6 @@ obj-$(CONFIG_USB_MSM_OTG)		+= phy-msm-usb.o
 obj-$(CONFIG_USB_MV_OTG)		+= phy-mv-usb.o
 obj-$(CONFIG_USB_MXS_PHY)		+= phy-mxs-usb.o
 obj-$(CONFIG_USB_RCAR_PHY)		+= phy-rcar-usb.o
+obj-$(CONFIG_USB_RCAR_GEN2_PHY)		+= phy-rcar-gen2-usb.o
 obj-$(CONFIG_USB_ULPI)			+= phy-ulpi.o
 obj-$(CONFIG_USB_ULPI_VIEWPORT)		+= phy-ulpi-viewport.o

drivers/usb/phy/phy-am335x-control.c

@@ -26,6 +26,41 @@ struct am335x_control_usb {
 #define USBPHY_OTGVDET_EN	(1 << 19)
 #define USBPHY_OTGSESSEND_EN	(1 << 20)
 
+#define AM335X_PHY0_WK_EN	(1 << 0)
+#define AM335X_PHY1_WK_EN	(1 << 8)
+
+static void am335x_phy_wkup(struct  phy_control *phy_ctrl, u32 id, bool on)
+{
+	struct am335x_control_usb *usb_ctrl;
+	u32 val;
+	u32 reg;
+
+	usb_ctrl = container_of(phy_ctrl, struct am335x_control_usb, phy_ctrl);
+
+	switch (id) {
+	case 0:
+		reg = AM335X_PHY0_WK_EN;
+		break;
+	case 1:
+		reg = AM335X_PHY1_WK_EN;
+		break;
+	default:
+		WARN_ON(1);
+		return;
+	}
+
+	spin_lock(&usb_ctrl->lock);
+	val = readl(usb_ctrl->wkup);
+
+	if (on)
+		val |= reg;
+	else
+		val &= ~reg;
+
+	writel(val, usb_ctrl->wkup);
+	spin_unlock(&usb_ctrl->lock);
+}
+
 static void am335x_phy_power(struct phy_control *phy_ctrl, u32 id, bool on)
 {
 	struct am335x_control_usb *usb_ctrl;
@@ -59,6 +94,7 @@ static void am335x_phy_power(struct phy_control *phy_ctrl, u32 id, bool on)
 
 static const struct phy_control ctrl_am335x = {
 	.phy_power = am335x_phy_power,
+	.phy_wkup = am335x_phy_wkup,
 };
 
 static const struct of_device_id omap_control_usb_id_table[] = {
@@ -117,6 +153,12 @@ static int am335x_control_usb_probe(struct platform_device *pdev)
 	ctrl_usb->phy_reg = devm_ioremap_resource(&pdev->dev, res);
 	if (IS_ERR(ctrl_usb->phy_reg))
 		return PTR_ERR(ctrl_usb->phy_reg);
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "wakeup");
+	ctrl_usb->wkup = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(ctrl_usb->wkup))
+		return PTR_ERR(ctrl_usb->wkup);
+
 	spin_lock_init(&ctrl_usb->lock);
 	ctrl_usb->phy_ctrl = *phy_ctrl;
 
@@ -129,7 +171,7 @@ static struct platform_driver am335x_control_driver = {
 	.driver		= {
 		.name	= "am335x-control-usb",
 		.owner	= THIS_MODULE,
-		.of_match_table = of_match_ptr(omap_control_usb_id_table),
+		.of_match_table = omap_control_usb_id_table,
 	},
 };
 

drivers/usb/phy/phy-am335x.c

@@ -53,21 +53,20 @@ static int am335x_phy_probe(struct platform_device *pdev)
 	}
 
 	ret = usb_phy_gen_create_phy(dev, &am_phy->usb_phy_gen,
-			USB_PHY_TYPE_USB2, 0, false, false);
+			USB_PHY_TYPE_USB2, 0, false);
 	if (ret)
 		return ret;
 
 	ret = usb_add_phy_dev(&am_phy->usb_phy_gen.phy);
 	if (ret)
-		goto err_add;
+		return ret;
 	am_phy->usb_phy_gen.phy.init = am335x_init;
 	am_phy->usb_phy_gen.phy.shutdown = am335x_shutdown;
 
 	platform_set_drvdata(pdev, am_phy);
+
 	return 0;
 
-err_add:
-	usb_phy_gen_cleanup_phy(&am_phy->usb_phy_gen);
 	return ret;
 }
 
@@ -79,6 +78,40 @@ static int am335x_phy_remove(struct platform_device *pdev)
 	return 0;
 }
 
+#ifdef CONFIG_PM_RUNTIME
+
+static int am335x_phy_runtime_suspend(struct device *dev)
+{
+	struct platform_device	*pdev = to_platform_device(dev);
+	struct am335x_phy *am_phy = platform_get_drvdata(pdev);
+
+	if (device_may_wakeup(dev))
+		phy_ctrl_wkup(am_phy->phy_ctrl, am_phy->id, true);
+	phy_ctrl_power(am_phy->phy_ctrl, am_phy->id, false);
+	return 0;
+}
+
+static int am335x_phy_runtime_resume(struct device *dev)
+{
+	struct platform_device	*pdev = to_platform_device(dev);
+	struct am335x_phy	*am_phy = platform_get_drvdata(pdev);
+
+	phy_ctrl_power(am_phy->phy_ctrl, am_phy->id, true);
+	if (device_may_wakeup(dev))
+		phy_ctrl_wkup(am_phy->phy_ctrl, am_phy->id, false);
+	return 0;
+}
+
+static const struct dev_pm_ops am335x_pm_ops = {
+	SET_RUNTIME_PM_OPS(am335x_phy_runtime_suspend,
+			am335x_phy_runtime_resume, NULL)
+};
+
+#define DEV_PM_OPS	(&am335x_pm_ops)
+#else
+#define DEV_PM_OPS	NULL
+#endif
+
 static const struct of_device_id am335x_phy_ids[] = {
 	{ .compatible = "ti,am335x-usb-phy" },
 	{ }
@@ -91,7 +124,8 @@ static struct platform_driver am335x_phy_driver = {
 	.driver         = {
 		.name   = "am335x-phy-driver",
 		.owner  = THIS_MODULE,
-		.of_match_table = of_match_ptr(am335x_phy_ids),
+		.pm = DEV_PM_OPS,
+		.of_match_table = am335x_phy_ids,
 	},
 };
 

drivers/usb/phy/phy-fsl-usb.c

@@ -134,7 +134,7 @@ int write_ulpi(u8 addr, u8 data)
 /* Operations that will be called from OTG Finite State Machine */
 
 /* Charge vbus for vbus pulsing in SRP */
-void fsl_otg_chrg_vbus(int on)
+void fsl_otg_chrg_vbus(struct otg_fsm *fsm, int on)
 {
 	u32 tmp;
 
@@ -170,7 +170,7 @@ void fsl_otg_dischrg_vbus(int on)
 }
 
 /* A-device driver vbus, controlled through PP bit in PORTSC */
-void fsl_otg_drv_vbus(int on)
+void fsl_otg_drv_vbus(struct otg_fsm *fsm, int on)
 {
 	u32 tmp;
 
@@ -188,7 +188,7 @@ void fsl_otg_drv_vbus(int on)
  * Pull-up D+, signalling connect by periperal. Also used in
  * data-line pulsing in SRP
  */
-void fsl_otg_loc_conn(int on)
+void fsl_otg_loc_conn(struct otg_fsm *fsm, int on)
 {
 	u32 tmp;
 
@@ -207,7 +207,7 @@ void fsl_otg_loc_conn(int on)
  * port.  In host mode, controller will automatically send SOF.
  * Suspend will block the data on the port.
  */
-void fsl_otg_loc_sof(int on)
+void fsl_otg_loc_sof(struct otg_fsm *fsm, int on)
 {
 	u32 tmp;
 
@@ -222,7 +222,7 @@ void fsl_otg_loc_sof(int on)
 }
 
 /* Start SRP pulsing by data-line pulsing, followed with v-bus pulsing. */
-void fsl_otg_start_pulse(void)
+void fsl_otg_start_pulse(struct otg_fsm *fsm)
 {
 	u32 tmp;
 
@@ -235,7 +235,7 @@ void fsl_otg_start_pulse(void)
 	fsl_otg_loc_conn(1);
 #endif
 
-	fsl_otg_add_timer(b_data_pulse_tmr);
+	fsl_otg_add_timer(fsm, b_data_pulse_tmr);
 }
 
 void b_data_pulse_end(unsigned long foo)
@@ -252,14 +252,14 @@ void b_data_pulse_end(unsigned long foo)
 void fsl_otg_pulse_vbus(void)
 {
 	srp_wait_done = 0;
-	fsl_otg_chrg_vbus(1);
+	fsl_otg_chrg_vbus(&fsl_otg_dev->fsm, 1);
 	/* start the timer to end vbus charge */
-	fsl_otg_add_timer(b_vbus_pulse_tmr);
+	fsl_otg_add_timer(&fsl_otg_dev->fsm, b_vbus_pulse_tmr);
 }
 
 void b_vbus_pulse_end(unsigned long foo)
 {
-	fsl_otg_chrg_vbus(0);
+	fsl_otg_chrg_vbus(&fsl_otg_dev->fsm, 0);
 
 	/*
 	 * As USB3300 using the same a_sess_vld and b_sess_vld voltage
@@ -267,7 +267,7 @@ void b_vbus_pulse_end(unsigned long foo)
 	 * residual voltage of vbus pulsing and A device pull up
 	 */
 	fsl_otg_dischrg_vbus(1);
-	fsl_otg_add_timer(b_srp_wait_tmr);
+	fsl_otg_add_timer(&fsl_otg_dev->fsm, b_srp_wait_tmr);
 }
 
 void b_srp_end(unsigned long foo)
@@ -289,7 +289,7 @@ void a_wait_enum(unsigned long foo)
 {
 	VDBG("a_wait_enum timeout\n");
 	if (!fsl_otg_dev->phy.otg->host->b_hnp_enable)
-		fsl_otg_add_timer(a_wait_enum_tmr);
+		fsl_otg_add_timer(&fsl_otg_dev->fsm, a_wait_enum_tmr);
 	else
 		otg_statemachine(&fsl_otg_dev->fsm);
 }
@@ -375,8 +375,42 @@ void fsl_otg_uninit_timers(void)
 	kfree(b_vbus_pulse_tmr);
 }
 
+static struct fsl_otg_timer *fsl_otg_get_timer(enum otg_fsm_timer t)
+{
+	struct fsl_otg_timer *timer;
+
+	/* REVISIT: use array of pointers to timers instead */
+	switch (t) {
+	case A_WAIT_VRISE:
+		timer = a_wait_vrise_tmr;
+		break;
+	case A_WAIT_BCON:
+		timer = a_wait_vrise_tmr;
+		break;
+	case A_AIDL_BDIS:
+		timer = a_wait_vrise_tmr;
+		break;
+	case B_ASE0_BRST:
+		timer = a_wait_vrise_tmr;
+		break;
+	case B_SE0_SRP:
+		timer = a_wait_vrise_tmr;
+		break;
+	case B_SRP_FAIL:
+		timer = a_wait_vrise_tmr;
+		break;
+	case A_WAIT_ENUM:
+		timer = a_wait_vrise_tmr;
+		break;
+	default:
+		timer = NULL;
+	}
+
+	return timer;
+}
+
 /* Add timer to timer list */
-void fsl_otg_add_timer(void *gtimer)
+void fsl_otg_add_timer(struct otg_fsm *fsm, void *gtimer)
 {
 	struct fsl_otg_timer *timer = gtimer;
 	struct fsl_otg_timer *tmp_timer;
@@ -394,8 +428,19 @@ void fsl_otg_add_timer(void *gtimer)
 	list_add_tail(&timer->list, &active_timers);
 }
 
+static void fsl_otg_fsm_add_timer(struct otg_fsm *fsm, enum otg_fsm_timer t)
+{
+	struct fsl_otg_timer *timer;
+
+	timer = fsl_otg_get_timer(t);
+	if (!timer)
+		return;
+
+	fsl_otg_add_timer(fsm, timer);
+}
+
 /* Remove timer from the timer list; clear timeout status */
-void fsl_otg_del_timer(void *gtimer)
+void fsl_otg_del_timer(struct otg_fsm *fsm, void *gtimer)
 {
 	struct fsl_otg_timer *timer = gtimer;
 	struct fsl_otg_timer *tmp_timer, *del_tmp;
@@ -405,6 +450,17 @@ void fsl_otg_del_timer(void *gtimer)
 			list_del(&timer->list);
 }
 
+static void fsl_otg_fsm_del_timer(struct otg_fsm *fsm, enum otg_fsm_timer t)
+{
+	struct fsl_otg_timer *timer;
+
+	timer = fsl_otg_get_timer(t);
+	if (!timer)
+		return;
+
+	fsl_otg_del_timer(fsm, timer);
+}
+
 /*
  * Reduce timer count by 1, and find timeout conditions.
  * Called by fsl_otg 1ms timer interrupt
@@ -468,7 +524,7 @@ int fsl_otg_start_host(struct otg_fsm *fsm, int on)
 				retval = dev->driver->pm->resume(dev);
 				if (fsm->id) {
 					/* default-b */
-					fsl_otg_drv_vbus(1);
+					fsl_otg_drv_vbus(fsm, 1);
 					/*
 					 * Workaround: b_host can't driver
 					 * vbus, but PP in PORTSC needs to
@@ -493,7 +549,7 @@ int fsl_otg_start_host(struct otg_fsm *fsm, int on)
 					retval = dev->driver->pm->suspend(dev);
 				if (fsm->id)
 					/* default-b */
-					fsl_otg_drv_vbus(0);
+					fsl_otg_drv_vbus(fsm, 0);
 			}
 			otg_dev->host_working = 0;
 		}
@@ -757,8 +813,8 @@ static struct otg_fsm_ops fsl_otg_ops = {
 	.loc_sof = fsl_otg_loc_sof,
 	.start_pulse = fsl_otg_start_pulse,
 
-	.add_timer = fsl_otg_add_timer,
-	.del_timer = fsl_otg_del_timer,
+	.add_timer = fsl_otg_fsm_add_timer,
+	.del_timer = fsl_otg_fsm_del_timer,
 
 	.start_host = fsl_otg_start_host,
 	.start_gadget = fsl_otg_start_gadget,
@@ -1011,7 +1067,7 @@ static int show_fsl_usb2_otg_state(struct device *dev,
 			"b_bus_suspend: %d\n"
 			"b_conn: %d\n"
 			"b_se0_srp: %d\n"
-			"b_sess_end: %d\n"
+			"b_ssend_srp: %d\n"
 			"b_sess_vld: %d\n"
 			"id: %d\n",
 			fsm->a_bus_req,
@@ -1026,7 +1082,7 @@ static int show_fsl_usb2_otg_state(struct device *dev,
 			fsm->b_bus_suspend,
 			fsm->b_conn,
 			fsm->b_se0_srp,
-			fsm->b_sess_end,
+			fsm->b_ssend_srp,
 			fsm->b_sess_vld,
 			fsm->id);
 	size -= t;
@@ -1057,7 +1113,7 @@ static long fsl_otg_ioctl(struct file *file, unsigned int cmd,
 		break;
 
 	case SET_A_SUSPEND_REQ:
-		fsl_otg_dev->fsm.a_suspend_req = arg;
+		fsl_otg_dev->fsm.a_suspend_req_inf = arg;
 		break;
 
 	case SET_A_BUS_DROP:

drivers/usb/phy/phy-fsl-usb.h

@@ -401,6 +401,6 @@ struct fsl_otg_config {
 #define GET_A_BUS_REQ		_IOR(OTG_IOCTL_MAGIC, 8, int)
 #define GET_B_BUS_REQ		_IOR(OTG_IOCTL_MAGIC, 9, int)
 
-void fsl_otg_add_timer(void *timer);
-void fsl_otg_del_timer(void *timer);
+void fsl_otg_add_timer(struct otg_fsm *fsm, void *timer);
+void fsl_otg_del_timer(struct otg_fsm *fsm, void *timer);
 void fsl_otg_pulse_vbus(void);

drivers/usb/phy/phy-fsm-usb.c

@@ -41,17 +41,17 @@ static int otg_set_protocol(struct otg_fsm *fsm, int protocol)
 			fsm->protocol, protocol);
 		/* stop old protocol */
 		if (fsm->protocol == PROTO_HOST)
-			ret = fsm->ops->start_host(fsm, 0);
+			ret = otg_start_host(fsm, 0);
 		else if (fsm->protocol == PROTO_GADGET)
-			ret = fsm->ops->start_gadget(fsm, 0);
+			ret = otg_start_gadget(fsm, 0);
 		if (ret)
 			return ret;
 
 		/* start new protocol */
 		if (protocol == PROTO_HOST)
-			ret = fsm->ops->start_host(fsm, 1);
+			ret = otg_start_host(fsm, 1);
 		else if (protocol == PROTO_GADGET)
-			ret = fsm->ops->start_gadget(fsm, 1);
+			ret = otg_start_gadget(fsm, 1);
 		if (ret)
 			return ret;
 
@@ -69,42 +69,50 @@ void otg_leave_state(struct otg_fsm *fsm, enum usb_otg_state old_state)
 {
 	switch (old_state) {
 	case OTG_STATE_B_IDLE:
-		otg_del_timer(fsm, b_se0_srp_tmr);
+		otg_del_timer(fsm, B_SE0_SRP);
 		fsm->b_se0_srp = 0;
+		fsm->adp_sns = 0;
+		fsm->adp_prb = 0;
 		break;
 	case OTG_STATE_B_SRP_INIT:
+		fsm->data_pulse = 0;
 		fsm->b_srp_done = 0;
 		break;
 	case OTG_STATE_B_PERIPHERAL:
 		break;
 	case OTG_STATE_B_WAIT_ACON:
-		otg_del_timer(fsm, b_ase0_brst_tmr);
+		otg_del_timer(fsm, B_ASE0_BRST);
 		fsm->b_ase0_brst_tmout = 0;
 		break;
 	case OTG_STATE_B_HOST:
 		break;
 	case OTG_STATE_A_IDLE:
+		fsm->adp_prb = 0;
 		break;
 	case OTG_STATE_A_WAIT_VRISE:
-		otg_del_timer(fsm, a_wait_vrise_tmr);
+		otg_del_timer(fsm, A_WAIT_VRISE);
 		fsm->a_wait_vrise_tmout = 0;
 		break;
 	case OTG_STATE_A_WAIT_BCON:
-		otg_del_timer(fsm, a_wait_bcon_tmr);
+		otg_del_timer(fsm, A_WAIT_BCON);
 		fsm->a_wait_bcon_tmout = 0;
 		break;
 	case OTG_STATE_A_HOST:
-		otg_del_timer(fsm, a_wait_enum_tmr);
+		otg_del_timer(fsm, A_WAIT_ENUM);
 		break;
 	case OTG_STATE_A_SUSPEND:
-		otg_del_timer(fsm, a_aidl_bdis_tmr);
+		otg_del_timer(fsm, A_AIDL_BDIS);
 		fsm->a_aidl_bdis_tmout = 0;
-		fsm->a_suspend_req = 0;
+		fsm->a_suspend_req_inf = 0;
 		break;
 	case OTG_STATE_A_PERIPHERAL:
+		otg_del_timer(fsm, A_BIDL_ADIS);
+		fsm->a_bidl_adis_tmout = 0;
 		break;
 	case OTG_STATE_A_WAIT_VFALL:
-		otg_del_timer(fsm, a_wait_vrise_tmr);
+		otg_del_timer(fsm, A_WAIT_VFALL);
+		fsm->a_wait_vfall_tmout = 0;
+		otg_del_timer(fsm, A_WAIT_VRISE);
 		break;
 	case OTG_STATE_A_VBUS_ERR:
 		break;
@@ -127,14 +135,19 @@ int otg_set_state(struct otg_fsm *fsm, enum usb_otg_state new_state)
 		otg_chrg_vbus(fsm, 0);
 		otg_loc_conn(fsm, 0);
 		otg_loc_sof(fsm, 0);
+		/*
+		 * Driver is responsible for starting ADP probing
+		 * if ADP sensing times out.
+		 */
+		otg_start_adp_sns(fsm);
 		otg_set_protocol(fsm, PROTO_UNDEF);
-		otg_add_timer(fsm, b_se0_srp_tmr);
+		otg_add_timer(fsm, B_SE0_SRP);
 		break;
 	case OTG_STATE_B_SRP_INIT:
 		otg_start_pulse(fsm);
 		otg_loc_sof(fsm, 0);
 		otg_set_protocol(fsm, PROTO_UNDEF);
-		otg_add_timer(fsm, b_srp_fail_tmr);
+		otg_add_timer(fsm, B_SRP_FAIL);
 		break;
 	case OTG_STATE_B_PERIPHERAL:
 		otg_chrg_vbus(fsm, 0);
@@ -147,7 +160,7 @@ int otg_set_state(struct otg_fsm *fsm, enum usb_otg_state new_state)
 		otg_loc_conn(fsm, 0);
 		otg_loc_sof(fsm, 0);
 		otg_set_protocol(fsm, PROTO_HOST);
-		otg_add_timer(fsm, b_ase0_brst_tmr);
+		otg_add_timer(fsm, B_ASE0_BRST);
 		fsm->a_bus_suspend = 0;
 		break;
 	case OTG_STATE_B_HOST:
@@ -163,6 +176,7 @@ int otg_set_state(struct otg_fsm *fsm, enum usb_otg_state new_state)
 		otg_chrg_vbus(fsm, 0);
 		otg_loc_conn(fsm, 0);
 		otg_loc_sof(fsm, 0);
+		otg_start_adp_prb(fsm);
 		otg_set_protocol(fsm, PROTO_HOST);
 		break;
 	case OTG_STATE_A_WAIT_VRISE:
@@ -170,14 +184,14 @@ int otg_set_state(struct otg_fsm *fsm, enum usb_otg_state new_state)
 		otg_loc_conn(fsm, 0);
 		otg_loc_sof(fsm, 0);
 		otg_set_protocol(fsm, PROTO_HOST);
-		otg_add_timer(fsm, a_wait_vrise_tmr);
+		otg_add_timer(fsm, A_WAIT_VRISE);
 		break;
 	case OTG_STATE_A_WAIT_BCON:
 		otg_drv_vbus(fsm, 1);
 		otg_loc_conn(fsm, 0);
 		otg_loc_sof(fsm, 0);
 		otg_set_protocol(fsm, PROTO_HOST);
-		otg_add_timer(fsm, a_wait_bcon_tmr);
+		otg_add_timer(fsm, A_WAIT_BCON);
 		break;
 	case OTG_STATE_A_HOST:
 		otg_drv_vbus(fsm, 1);
@@ -188,15 +202,15 @@ int otg_set_state(struct otg_fsm *fsm, enum usb_otg_state new_state)
 		 * When HNP is triggered while a_bus_req = 0, a_host will
 		 * suspend too fast to complete a_set_b_hnp_en
 		 */
-		if (!fsm->a_bus_req || fsm->a_suspend_req)
-			otg_add_timer(fsm, a_wait_enum_tmr);
+		if (!fsm->a_bus_req || fsm->a_suspend_req_inf)
+			otg_add_timer(fsm, A_WAIT_ENUM);
 		break;
 	case OTG_STATE_A_SUSPEND:
 		otg_drv_vbus(fsm, 1);
 		otg_loc_conn(fsm, 0);
 		otg_loc_sof(fsm, 0);
 		otg_set_protocol(fsm, PROTO_HOST);
-		otg_add_timer(fsm, a_aidl_bdis_tmr);
+		otg_add_timer(fsm, A_AIDL_BDIS);
 
 		break;
 	case OTG_STATE_A_PERIPHERAL:
@@ -204,12 +218,14 @@ int otg_set_state(struct otg_fsm *fsm, enum usb_otg_state new_state)
 		otg_loc_sof(fsm, 0);
 		otg_set_protocol(fsm, PROTO_GADGET);
 		otg_drv_vbus(fsm, 1);
+		otg_add_timer(fsm, A_BIDL_ADIS);
 		break;
 	case OTG_STATE_A_WAIT_VFALL:
 		otg_drv_vbus(fsm, 0);
 		otg_loc_conn(fsm, 0);
 		otg_loc_sof(fsm, 0);
 		otg_set_protocol(fsm, PROTO_HOST);
+		otg_add_timer(fsm, A_WAIT_VFALL);
 		break;
 	case OTG_STATE_A_VBUS_ERR:
 		otg_drv_vbus(fsm, 0);
@@ -250,7 +266,8 @@ int otg_statemachine(struct otg_fsm *fsm)
 			otg_set_state(fsm, OTG_STATE_A_IDLE);
 		else if (fsm->b_sess_vld && fsm->otg->gadget)
 			otg_set_state(fsm, OTG_STATE_B_PERIPHERAL);
-		else if (fsm->b_bus_req && fsm->b_sess_end && fsm->b_se0_srp)
+		else if ((fsm->b_bus_req || fsm->adp_change || fsm->power_up) &&
+				fsm->b_ssend_srp && fsm->b_se0_srp)
 			otg_set_state(fsm, OTG_STATE_B_SRP_INIT);
 		break;
 	case OTG_STATE_B_SRP_INIT:
@@ -277,13 +294,14 @@ int otg_statemachine(struct otg_fsm *fsm)
 	case OTG_STATE_B_HOST:
 		if (!fsm->id || !fsm->b_sess_vld)
 			otg_set_state(fsm, OTG_STATE_B_IDLE);
-		else if (!fsm->b_bus_req || !fsm->a_conn)
+		else if (!fsm->b_bus_req || !fsm->a_conn || fsm->test_device)
 			otg_set_state(fsm, OTG_STATE_B_PERIPHERAL);
 		break;
 	case OTG_STATE_A_IDLE:
 		if (fsm->id)
 			otg_set_state(fsm, OTG_STATE_B_IDLE);
-		else if (!fsm->a_bus_drop && (fsm->a_bus_req || fsm->a_srp_det))
+		else if (!fsm->a_bus_drop && (fsm->a_bus_req ||
+			  fsm->a_srp_det || fsm->adp_change || fsm->power_up))
 			otg_set_state(fsm, OTG_STATE_A_WAIT_VRISE);
 		break;
 	case OTG_STATE_A_WAIT_VRISE:
@@ -301,7 +319,7 @@ int otg_statemachine(struct otg_fsm *fsm)
 			otg_set_state(fsm, OTG_STATE_A_WAIT_VFALL);
 		break;
 	case OTG_STATE_A_HOST:
-		if ((!fsm->a_bus_req || fsm->a_suspend_req) &&
+		if ((!fsm->a_bus_req || fsm->a_suspend_req_inf) &&
 				fsm->otg->host->b_hnp_enable)
 			otg_set_state(fsm, OTG_STATE_A_SUSPEND);
 		else if (fsm->id || !fsm->b_conn || fsm->a_bus_drop)
@@ -324,14 +342,14 @@ int otg_statemachine(struct otg_fsm *fsm)
 	case OTG_STATE_A_PERIPHERAL:
 		if (fsm->id || fsm->a_bus_drop)
 			otg_set_state(fsm, OTG_STATE_A_WAIT_VFALL);
-		else if (fsm->b_bus_suspend)
+		else if (fsm->a_bidl_adis_tmout || fsm->b_bus_suspend)
 			otg_set_state(fsm, OTG_STATE_A_WAIT_BCON);
 		else if (!fsm->a_vbus_vld)
 			otg_set_state(fsm, OTG_STATE_A_VBUS_ERR);
 		break;
 	case OTG_STATE_A_WAIT_VFALL:
-		if (fsm->id || fsm->a_bus_req || (!fsm->a_sess_vld &&
-					!fsm->b_conn))
+		if (fsm->a_wait_vfall_tmout || fsm->id || fsm->a_bus_req ||
+				(!fsm->a_sess_vld && !fsm->b_conn))
 			otg_set_state(fsm, OTG_STATE_A_IDLE);
 		break;
 	case OTG_STATE_A_VBUS_ERR:

drivers/usb/phy/phy-fsm-usb.h

@@ -34,45 +34,76 @@
 #define PROTO_HOST	(1)
 #define PROTO_GADGET	(2)
 
+enum otg_fsm_timer {
+	/* Standard OTG timers */
+	A_WAIT_VRISE,
+	A_WAIT_VFALL,
+	A_WAIT_BCON,
+	A_AIDL_BDIS,
+	B_ASE0_BRST,
+	A_BIDL_ADIS,
+
+	/* Auxiliary timers */
+	B_SE0_SRP,
+	B_SRP_FAIL,
+	A_WAIT_ENUM,
+
+	NUM_OTG_FSM_TIMERS,
+};
+
 /* OTG state machine according to the OTG spec */
 struct otg_fsm {
 	/* Input */
+	int id;
+	int adp_change;
+	int power_up;
+	int test_device;
+	int a_bus_drop;
+	int a_bus_req;
+	int a_srp_det;
+	int a_vbus_vld;
+	int b_conn;
 	int a_bus_resume;
 	int a_bus_suspend;
 	int a_conn;
+	int b_bus_req;
+	int b_se0_srp;
+	int b_ssend_srp;
+	int b_sess_vld;
+	/* Auxilary inputs */
 	int a_sess_vld;
-	int a_srp_det;
-	int a_vbus_vld;
 	int b_bus_resume;
 	int b_bus_suspend;
-	int b_conn;
-	int b_se0_srp;
-	int b_sess_end;
-	int b_sess_vld;
-	int id;
+
+	/* Output */
+	int data_pulse;
+	int drv_vbus;
+	int loc_conn;
+	int loc_sof;
+	int adp_prb;
+	int adp_sns;
 
 	/* Internal variables */
 	int a_set_b_hnp_en;
 	int b_srp_done;
 	int b_hnp_enable;
+	int a_clr_err;
+
+	/* Informative variables */
+	int a_bus_drop_inf;
+	int a_bus_req_inf;
+	int a_clr_err_inf;
+	int b_bus_req_inf;
+	/* Auxilary informative variables */
+	int a_suspend_req_inf;
 
 	/* Timeout indicator for timers */
 	int a_wait_vrise_tmout;
+	int a_wait_vfall_tmout;
 	int a_wait_bcon_tmout;
 	int a_aidl_bdis_tmout;
 	int b_ase0_brst_tmout;
-
-	/* Informative variables */
-	int a_bus_drop;
-	int a_bus_req;
-	int a_clr_err;
-	int a_suspend_req;
-	int b_bus_req;
-
-	/* Output */
-	int drv_vbus;
-	int loc_conn;
-	int loc_sof;
+	int a_bidl_adis_tmout;
 
 	struct otg_fsm_ops *ops;
 	struct usb_otg *otg;
@@ -83,65 +114,123 @@ struct otg_fsm {
 };
 
 struct otg_fsm_ops {
-	void	(*chrg_vbus)(int on);
-	void	(*drv_vbus)(int on);
-	void	(*loc_conn)(int on);
-	void	(*loc_sof)(int on);
-	void	(*start_pulse)(void);
-	void	(*add_timer)(void *timer);
-	void	(*del_timer)(void *timer);
+	void	(*chrg_vbus)(struct otg_fsm *fsm, int on);
+	void	(*drv_vbus)(struct otg_fsm *fsm, int on);
+	void	(*loc_conn)(struct otg_fsm *fsm, int on);
+	void	(*loc_sof)(struct otg_fsm *fsm, int on);
+	void	(*start_pulse)(struct otg_fsm *fsm);
+	void	(*start_adp_prb)(struct otg_fsm *fsm);
+	void	(*start_adp_sns)(struct otg_fsm *fsm);
+	void	(*add_timer)(struct otg_fsm *fsm, enum otg_fsm_timer timer);
+	void	(*del_timer)(struct otg_fsm *fsm, enum otg_fsm_timer timer);
 	int	(*start_host)(struct otg_fsm *fsm, int on);
 	int	(*start_gadget)(struct otg_fsm *fsm, int on);
 };
 
 
-static inline void otg_chrg_vbus(struct otg_fsm *fsm, int on)
+static inline int otg_chrg_vbus(struct otg_fsm *fsm, int on)
 {
-	fsm->ops->chrg_vbus(on);
+	if (!fsm->ops->chrg_vbus)
+		return -EOPNOTSUPP;
+	fsm->ops->chrg_vbus(fsm, on);
+	return 0;
 }
 
-static inline void otg_drv_vbus(struct otg_fsm *fsm, int on)
+static inline int otg_drv_vbus(struct otg_fsm *fsm, int on)
 {
+	if (!fsm->ops->drv_vbus)
+		return -EOPNOTSUPP;
 	if (fsm->drv_vbus != on) {
 		fsm->drv_vbus = on;
-		fsm->ops->drv_vbus(on);
+		fsm->ops->drv_vbus(fsm, on);
 	}
+	return 0;
 }
 
-static inline void otg_loc_conn(struct otg_fsm *fsm, int on)
+static inline int otg_loc_conn(struct otg_fsm *fsm, int on)
 {
+	if (!fsm->ops->loc_conn)
+		return -EOPNOTSUPP;
 	if (fsm->loc_conn != on) {
 		fsm->loc_conn = on;
-		fsm->ops->loc_conn(on);
+		fsm->ops->loc_conn(fsm, on);
 	}
+	return 0;
 }
 
-static inline void otg_loc_sof(struct otg_fsm *fsm, int on)
+static inline int otg_loc_sof(struct otg_fsm *fsm, int on)
 {
+	if (!fsm->ops->loc_sof)
+		return -EOPNOTSUPP;
 	if (fsm->loc_sof != on) {
 		fsm->loc_sof = on;
-		fsm->ops->loc_sof(on);
+		fsm->ops->loc_sof(fsm, on);
+	}
+	return 0;
+}
+
+static inline int otg_start_pulse(struct otg_fsm *fsm)
+{
+	if (!fsm->ops->start_pulse)
+		return -EOPNOTSUPP;
+	if (!fsm->data_pulse) {
+		fsm->data_pulse = 1;
+		fsm->ops->start_pulse(fsm);
 	}
+	return 0;
 }
 
-static inline void otg_start_pulse(struct otg_fsm *fsm)
+static inline int otg_start_adp_prb(struct otg_fsm *fsm)
 {
-	fsm->ops->start_pulse();
+	if (!fsm->ops->start_adp_prb)
+		return -EOPNOTSUPP;
+	if (!fsm->adp_prb) {
+		fsm->adp_sns = 0;
+		fsm->adp_prb = 1;
+		fsm->ops->start_adp_prb(fsm);
+	}
+	return 0;
 }
 
-static inline void otg_add_timer(struct otg_fsm *fsm, void *timer)
+static inline int otg_start_adp_sns(struct otg_fsm *fsm)
 {
-	fsm->ops->add_timer(timer);
+	if (!fsm->ops->start_adp_sns)
+		return -EOPNOTSUPP;
+	if (!fsm->adp_sns) {
+		fsm->adp_sns = 1;
+		fsm->ops->start_adp_sns(fsm);
+	}
+	return 0;
 }
 
-static inline void otg_del_timer(struct otg_fsm *fsm, void *timer)
+static inline int otg_add_timer(struct otg_fsm *fsm, enum otg_fsm_timer timer)
 {
-	fsm->ops->del_timer(timer);
+	if (!fsm->ops->add_timer)
+		return -EOPNOTSUPP;
+	fsm->ops->add_timer(fsm, timer);
+	return 0;
 }
 
-int otg_statemachine(struct otg_fsm *fsm);
+static inline int otg_del_timer(struct otg_fsm *fsm, enum otg_fsm_timer timer)
+{
+	if (!fsm->ops->del_timer)
+		return -EOPNOTSUPP;
+	fsm->ops->del_timer(fsm, timer);
+	return 0;
+}
 
-/* Defined by device specific driver, for different timer implementation */
-extern struct fsl_otg_timer *a_wait_vrise_tmr, *a_wait_bcon_tmr,
-	*a_aidl_bdis_tmr, *b_ase0_brst_tmr, *b_se0_srp_tmr, *b_srp_fail_tmr,
-	*a_wait_enum_tmr;
+static inline int otg_start_host(struct otg_fsm *fsm, int on)
+{
+	if (!fsm->ops->start_host)
+		return -EOPNOTSUPP;
+	return fsm->ops->start_host(fsm, on);
+}
+
+static inline int otg_start_gadget(struct otg_fsm *fsm, int on)
+{
+	if (!fsm->ops->start_gadget)
+		return -EOPNOTSUPP;
+	return fsm->ops->start_gadget(fsm, on);
+}
+
+int otg_statemachine(struct otg_fsm *fsm);

drivers/usb/phy/phy-generic.c

@@ -35,6 +35,9 @@
 #include <linux/clk.h>
 #include <linux/regulator/consumer.h>
 #include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
 
 #include "phy-generic.h"
 
@@ -64,6 +67,23 @@ static int nop_set_suspend(struct usb_phy *x, int suspend)
 	return 0;
 }
 
+static void nop_reset_set(struct usb_phy_gen_xceiv *nop, int asserted)
+{
+	int value;
+
+	if (!gpio_is_valid(nop->gpio_reset))
+		return;
+
+	value = asserted;
+	if (nop->reset_active_low)
+		value = !value;
+
+	gpio_set_value_cansleep(nop->gpio_reset, value);
+
+	if (!asserted)
+		usleep_range(10000, 20000);
+}
+
 int usb_gen_phy_init(struct usb_phy *phy)
 {
 	struct usb_phy_gen_xceiv *nop = dev_get_drvdata(phy->dev);
@@ -74,13 +94,10 @@ int usb_gen_phy_init(struct usb_phy *phy)
 	}
 
 	if (!IS_ERR(nop->clk))
-		clk_enable(nop->clk);
+		clk_prepare_enable(nop->clk);
 
-	if (!IS_ERR(nop->reset)) {
-		/* De-assert RESET */
-		if (regulator_enable(nop->reset))
-			dev_err(phy->dev, "Failed to de-assert reset\n");
-	}
+	/* De-assert RESET */
+	nop_reset_set(nop, 0);
 
 	return 0;
 }
@@ -90,14 +107,11 @@ void usb_gen_phy_shutdown(struct usb_phy *phy)
 {
 	struct usb_phy_gen_xceiv *nop = dev_get_drvdata(phy->dev);
 
-	if (!IS_ERR(nop->reset)) {
-		/* Assert RESET */
-		if (regulator_disable(nop->reset))
-			dev_err(phy->dev, "Failed to assert reset\n");
-	}
+	/* Assert RESET */
+	nop_reset_set(nop, 1);
 
 	if (!IS_ERR(nop->clk))
-		clk_disable(nop->clk);
+		clk_disable_unprepare(nop->clk);
 
 	if (!IS_ERR(nop->vcc)) {
 		if (regulator_disable(nop->vcc))
@@ -136,8 +150,7 @@ static int nop_set_host(struct usb_otg *otg, struct usb_bus *host)
 }
 
 int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_gen_xceiv *nop,
-		enum usb_phy_type type, u32 clk_rate, bool needs_vcc,
-		bool needs_reset)
+		enum usb_phy_type type, u32 clk_rate, bool needs_vcc)
 {
 	int err;
 
@@ -160,14 +173,6 @@ int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_gen_xceiv *nop,
 		}
 	}
 
-	if (!IS_ERR(nop->clk)) {
-		err = clk_prepare(nop->clk);
-		if (err) {
-			dev_err(dev, "Error preparing clock\n");
-			return err;
-		}
-	}
-
 	nop->vcc = devm_regulator_get(dev, "vcc");
 	if (IS_ERR(nop->vcc)) {
 		dev_dbg(dev, "Error getting vcc regulator: %ld\n",
@@ -176,12 +181,22 @@ int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_gen_xceiv *nop,
 			return -EPROBE_DEFER;
 	}
 
-	nop->reset = devm_regulator_get(dev, "reset");
-	if (IS_ERR(nop->reset)) {
-		dev_dbg(dev, "Error getting reset regulator: %ld\n",
-					PTR_ERR(nop->reset));
-		if (needs_reset)
-			return -EPROBE_DEFER;
+	if (gpio_is_valid(nop->gpio_reset)) {
+		unsigned long gpio_flags;
+
+		/* Assert RESET */
+		if (nop->reset_active_low)
+			gpio_flags = GPIOF_OUT_INIT_LOW;
+		else
+			gpio_flags = GPIOF_OUT_INIT_HIGH;
+
+		err = devm_gpio_request_one(dev, nop->gpio_reset,
+						gpio_flags, dev_name(dev));
+		if (err) {
+			dev_err(dev, "Error requesting RESET GPIO %d\n",
+					nop->gpio_reset);
+			return err;
+		}
 	}
 
 	nop->dev		= dev;
@@ -200,13 +215,6 @@ int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_gen_xceiv *nop,
 }
 EXPORT_SYMBOL_GPL(usb_phy_gen_create_phy);
 
-void usb_phy_gen_cleanup_phy(struct usb_phy_gen_xceiv *nop)
-{
-	if (!IS_ERR(nop->clk))
-		clk_unprepare(nop->clk);
-}
-EXPORT_SYMBOL_GPL(usb_phy_gen_cleanup_phy);
-
 static int usb_phy_gen_xceiv_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
@@ -217,31 +225,36 @@ static int usb_phy_gen_xceiv_probe(struct platform_device *pdev)
 	int err;
 	u32 clk_rate = 0;
 	bool needs_vcc = false;
-	bool needs_reset = false;
+
+	nop = devm_kzalloc(dev, sizeof(*nop), GFP_KERNEL);
+	if (!nop)
+		return -ENOMEM;
+
+	nop->reset_active_low = true;	/* default behaviour */
 
 	if (dev->of_node) {
 		struct device_node *node = dev->of_node;
+		enum of_gpio_flags flags;
 
 		if (of_property_read_u32(node, "clock-frequency", &clk_rate))
 			clk_rate = 0;
 
 		needs_vcc = of_property_read_bool(node, "vcc-supply");
-		needs_reset = of_property_read_bool(node, "reset-supply");
+		nop->gpio_reset = of_get_named_gpio_flags(node, "reset-gpios",
+								0, &flags);
+		if (nop->gpio_reset == -EPROBE_DEFER)
+			return -EPROBE_DEFER;
+
+		nop->reset_active_low = flags & OF_GPIO_ACTIVE_LOW;
 
 	} else if (pdata) {
 		type = pdata->type;
 		clk_rate = pdata->clk_rate;
 		needs_vcc = pdata->needs_vcc;
-		needs_reset = pdata->needs_reset;
+		nop->gpio_reset = pdata->gpio_reset;
 	}
 
-	nop = devm_kzalloc(dev, sizeof(*nop), GFP_KERNEL);
-	if (!nop)
-		return -ENOMEM;
-
-
-	err = usb_phy_gen_create_phy(dev, nop, type, clk_rate, needs_vcc,
-			needs_reset);
+	err = usb_phy_gen_create_phy(dev, nop, type, clk_rate, needs_vcc);
 	if (err)
 		return err;
 
@@ -252,15 +265,13 @@ static int usb_phy_gen_xceiv_probe(struct platform_device *pdev)
 	if (err) {
 		dev_err(&pdev->dev, "can't register transceiver, err: %d\n",
 			err);
-		goto err_add;
+		return err;
 	}
 
 	platform_set_drvdata(pdev, nop);
 
 	return 0;
 
-err_add:
-	usb_phy_gen_cleanup_phy(nop);
 	return err;
 }
 
@@ -268,7 +279,6 @@ static int usb_phy_gen_xceiv_remove(struct platform_device *pdev)
 {
 	struct usb_phy_gen_xceiv *nop = platform_get_drvdata(pdev);
 
-	usb_phy_gen_cleanup_phy(nop);
 	usb_remove_phy(&nop->phy);
 
 	return 0;

drivers/usb/phy/phy-generic.h

@@ -6,15 +6,14 @@ struct usb_phy_gen_xceiv {
 	struct device *dev;
 	struct clk *clk;
 	struct regulator *vcc;
-	struct regulator *reset;
+	int gpio_reset;
+	bool reset_active_low;
 };
 
 int usb_gen_phy_init(struct usb_phy *phy);
 void usb_gen_phy_shutdown(struct usb_phy *phy);
 
 int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_gen_xceiv *nop,
-		enum usb_phy_type type, u32 clk_rate, bool needs_vcc,
-		bool needs_reset);
-void usb_phy_gen_cleanup_phy(struct usb_phy_gen_xceiv *nop);
+		enum usb_phy_type type, u32 clk_rate, bool needs_vcc);
 
 #endif

drivers/usb/phy/phy-rcar-gen2-usb.c

@@ -0,0 +1,248 @@
+/*
+ * Renesas R-Car Gen2 USB phy driver
+ *
+ * Copyright (C) 2013 Renesas Solutions Corp.
+ * Copyright (C) 2013 Cogent Embedded, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_data/usb-rcar-gen2-phy.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+#include <linux/usb/otg.h>
+
+struct rcar_gen2_usb_phy_priv {
+	struct usb_phy phy;
+	void __iomem *base;
+	struct clk *clk;
+	spinlock_t lock;
+	int usecount;
+	u32 ugctrl2;
+};
+
+#define usb_phy_to_priv(p) container_of(p, struct rcar_gen2_usb_phy_priv, phy)
+
+/* Low Power Status register */
+#define USBHS_LPSTS_REG			0x02
+#define USBHS_LPSTS_SUSPM		(1 << 14)
+
+/* USB General control register */
+#define USBHS_UGCTRL_REG		0x80
+#define USBHS_UGCTRL_CONNECT		(1 << 2)
+#define USBHS_UGCTRL_PLLRESET		(1 << 0)
+
+/* USB General control register 2 */
+#define USBHS_UGCTRL2_REG		0x84
+#define USBHS_UGCTRL2_USB0_PCI		(1 << 4)
+#define USBHS_UGCTRL2_USB0_HS		(3 << 4)
+#define USBHS_UGCTRL2_USB2_PCI		(0 << 31)
+#define USBHS_UGCTRL2_USB2_SS		(1 << 31)
+
+/* USB General status register */
+#define USBHS_UGSTS_REG			0x88
+#define USBHS_UGSTS_LOCK		(3 << 8)
+
+/* Enable USBHS internal phy */
+static int __rcar_gen2_usbhs_phy_enable(void __iomem *base)
+{
+	u32 val;
+	int i;
+
+	/* USBHS PHY power on */
+	val = ioread32(base + USBHS_UGCTRL_REG);
+	val &= ~USBHS_UGCTRL_PLLRESET;
+	iowrite32(val, base + USBHS_UGCTRL_REG);
+
+	val = ioread16(base + USBHS_LPSTS_REG);
+	val |= USBHS_LPSTS_SUSPM;
+	iowrite16(val, base + USBHS_LPSTS_REG);
+
+	for (i = 0; i < 20; i++) {
+		val = ioread32(base + USBHS_UGSTS_REG);
+		if ((val & USBHS_UGSTS_LOCK) == USBHS_UGSTS_LOCK) {
+			val = ioread32(base + USBHS_UGCTRL_REG);
+			val |= USBHS_UGCTRL_CONNECT;
+			iowrite32(val, base + USBHS_UGCTRL_REG);
+			return 0;
+		}
+		udelay(1);
+	}
+
+	/* Timed out waiting for the PLL lock */
+	return -ETIMEDOUT;
+}
+
+/* Disable USBHS internal phy */
+static int __rcar_gen2_usbhs_phy_disable(void __iomem *base)
+{
+	u32 val;
+
+	/* USBHS PHY power off */
+	val = ioread32(base + USBHS_UGCTRL_REG);
+	val &= ~USBHS_UGCTRL_CONNECT;
+	iowrite32(val, base + USBHS_UGCTRL_REG);
+
+	val = ioread16(base + USBHS_LPSTS_REG);
+	val &= ~USBHS_LPSTS_SUSPM;
+	iowrite16(val, base + USBHS_LPSTS_REG);
+
+	val = ioread32(base + USBHS_UGCTRL_REG);
+	val |= USBHS_UGCTRL_PLLRESET;
+	iowrite32(val, base + USBHS_UGCTRL_REG);
+	return 0;
+}
+
+/* Setup USB channels */
+static void __rcar_gen2_usb_phy_init(struct rcar_gen2_usb_phy_priv *priv)
+{
+	u32 val;
+
+	clk_prepare_enable(priv->clk);
+
+	/* Set USB channels in the USBHS UGCTRL2 register */
+	val = ioread32(priv->base);
+	val &= ~(USBHS_UGCTRL2_USB0_HS | USBHS_UGCTRL2_USB2_SS);
+	val |= priv->ugctrl2;
+	iowrite32(val, priv->base);
+}
+
+/* Shutdown USB channels */
+static void __rcar_gen2_usb_phy_shutdown(struct rcar_gen2_usb_phy_priv *priv)
+{
+	__rcar_gen2_usbhs_phy_disable(priv->base);
+	clk_disable_unprepare(priv->clk);
+}
+
+static int rcar_gen2_usb_phy_set_suspend(struct usb_phy *phy, int suspend)
+{
+	struct rcar_gen2_usb_phy_priv *priv = usb_phy_to_priv(phy);
+	unsigned long flags;
+	int retval;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	retval = suspend ? __rcar_gen2_usbhs_phy_disable(priv->base) :
+			   __rcar_gen2_usbhs_phy_enable(priv->base);
+	spin_unlock_irqrestore(&priv->lock, flags);
+	return retval;
+}
+
+static int rcar_gen2_usb_phy_init(struct usb_phy *phy)
+{
+	struct rcar_gen2_usb_phy_priv *priv = usb_phy_to_priv(phy);
+	unsigned long flags;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	/*
+	 * Enable the clock and setup USB channels
+	 * if it's the first user
+	 */
+	if (!priv->usecount++)
+		__rcar_gen2_usb_phy_init(priv);
+	spin_unlock_irqrestore(&priv->lock, flags);
+	return 0;
+}
+
+static void rcar_gen2_usb_phy_shutdown(struct usb_phy *phy)
+{
+	struct rcar_gen2_usb_phy_priv *priv = usb_phy_to_priv(phy);
+	unsigned long flags;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	if (!priv->usecount) {
+		dev_warn(phy->dev, "Trying to disable phy with 0 usecount\n");
+		goto out;
+	}
+
+	/* Disable everything if it's the last user */
+	if (!--priv->usecount)
+		__rcar_gen2_usb_phy_shutdown(priv);
+out:
+	spin_unlock_irqrestore(&priv->lock, flags);
+}
+
+static int rcar_gen2_usb_phy_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct rcar_gen2_phy_platform_data *pdata;
+	struct rcar_gen2_usb_phy_priv *priv;
+	struct resource *res;
+	void __iomem *base;
+	struct clk *clk;
+	int retval;
+
+	pdata = dev_get_platdata(&pdev->dev);
+	if (!pdata) {
+		dev_err(dev, "No platform data\n");
+		return -EINVAL;
+	}
+
+	clk = devm_clk_get(&pdev->dev, "usbhs");
+	if (IS_ERR(clk)) {
+		dev_err(&pdev->dev, "Can't get the clock\n");
+		return PTR_ERR(clk);
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv) {
+		dev_err(dev, "Memory allocation failed\n");
+		return -ENOMEM;
+	}
+
+	spin_lock_init(&priv->lock);
+	priv->clk = clk;
+	priv->base = base;
+	priv->ugctrl2 = pdata->chan0_pci ?
+			USBHS_UGCTRL2_USB0_PCI : USBHS_UGCTRL2_USB0_HS;
+	priv->ugctrl2 |= pdata->chan2_pci ?
+			USBHS_UGCTRL2_USB2_PCI : USBHS_UGCTRL2_USB2_SS;
+	priv->phy.dev = dev;
+	priv->phy.label = dev_name(dev);
+	priv->phy.init = rcar_gen2_usb_phy_init;
+	priv->phy.shutdown = rcar_gen2_usb_phy_shutdown;
+	priv->phy.set_suspend = rcar_gen2_usb_phy_set_suspend;
+
+	retval = usb_add_phy(&priv->phy, USB_PHY_TYPE_USB2);
+	if (retval < 0) {
+		dev_err(dev, "Failed to add USB phy\n");
+		return retval;
+	}
+
+	platform_set_drvdata(pdev, priv);
+
+	return retval;
+}
+
+static int rcar_gen2_usb_phy_remove(struct platform_device *pdev)
+{
+	struct rcar_gen2_usb_phy_priv *priv = platform_get_drvdata(pdev);
+
+	usb_remove_phy(&priv->phy);
+
+	return 0;
+}
+
+static struct platform_driver rcar_gen2_usb_phy_driver = {
+	.driver = {
+		.name = "usb_phy_rcar_gen2",
+	},
+	.probe = rcar_gen2_usb_phy_probe,
+	.remove = rcar_gen2_usb_phy_remove,
+};
+
+module_platform_driver(rcar_gen2_usb_phy_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Renesas R-Car Gen2 USB phy");
+MODULE_AUTHOR("Valentine Barshak <valentine.barshak@cogentembedded.com>");

drivers/usb/phy/phy-tegra-usb.c

@@ -1090,7 +1090,7 @@ static struct platform_driver tegra_usb_phy_driver = {
 	.driver		= {
 		.name	= "tegra-phy",
 		.owner	= THIS_MODULE,
-		.of_match_table = of_match_ptr(tegra_usb_phy_id_table),
+		.of_match_table = tegra_usb_phy_id_table,
 	},
 };
 module_platform_driver(tegra_usb_phy_driver);

drivers/usb/phy/phy-twl6030-usb.c

@@ -33,6 +33,7 @@
 #include <linux/err.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
+#include <linux/of.h>
 
 /* usb register definitions */
 #define USB_VENDOR_ID_LSB		0x00

drivers/usb/phy/phy.c

@@ -98,7 +98,7 @@ struct usb_phy *devm_usb_get_phy(struct device *dev, enum usb_phy_type type)
 
 	ptr = devres_alloc(devm_usb_phy_release, sizeof(*ptr), GFP_KERNEL);
 	if (!ptr)
-		return NULL;
+		return ERR_PTR(-ENOMEM);
 
 	phy = usb_get_phy(type);
 	if (!IS_ERR(phy)) {

include/linux/platform_data/usb-rcar-gen2-phy.h

@@ -0,0 +1,22 @@
+/*
+ * Copyright (C) 2013 Renesas Solutions Corp.
+ * Copyright (C) 2013 Cogent Embedded, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __USB_RCAR_GEN2_PHY_H
+#define __USB_RCAR_GEN2_PHY_H
+
+#include <linux/types.h>
+
+struct rcar_gen2_phy_platform_data {
+	/* USB channel 0 configuration */
+	bool chan0_pci:1;	/* true: PCI USB host 0, false: USBHS */
+	/* USB channel 2 configuration */
+	bool chan2_pci:1;	/* true: PCI USB host 2, false: USBSS */
+};
+
+#endif

include/linux/usb/usb_phy_gen_xceiv.h

@@ -9,7 +9,8 @@ struct usb_phy_gen_xceiv_platform_data {
 
 	/* if set fails with -EPROBE_DEFER if can't get regulator */
 	unsigned int needs_vcc:1;
-	unsigned int needs_reset:1;
+	unsigned int needs_reset:1;	/* deprecated */
+	int gpio_reset;
 };
 
 #if defined(CONFIG_NOP_USB_XCEIV) || (defined(CONFIG_NOP_USB_XCEIV_MODULE) && defined(MODULE))