spi_flash_internal.h 2.8 KB

1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071727374757677
  1. /*
  2. * SPI flash internal definitions
  3. *
  4. * Copyright (C) 2008 Atmel Corporation
  5. */
  6. /* Common parameters -- kind of high, but they should only occur when there
  7. * is a problem (and well your system already is broken), so err on the side
  8. * of caution in case we're dealing with slower SPI buses and/or processors.
  9. */
  10. #define SPI_FLASH_PROG_TIMEOUT (2 * CONFIG_SYS_HZ)
  11. #define SPI_FLASH_PAGE_ERASE_TIMEOUT (5 * CONFIG_SYS_HZ)
  12. #define SPI_FLASH_SECTOR_ERASE_TIMEOUT (10 * CONFIG_SYS_HZ)
  13. /* Common commands */
  14. #define CMD_READ_ID 0x9f
  15. #define CMD_READ_ARRAY_SLOW 0x03
  16. #define CMD_READ_ARRAY_FAST 0x0b
  17. #define CMD_READ_ARRAY_LEGACY 0xe8
  18. #define CMD_READ_STATUS 0x05
  19. #define CMD_WRITE_ENABLE 0x06
  20. /* Common status */
  21. #define STATUS_WIP 0x01
  22. /* Send a single-byte command to the device and read the response */
  23. int spi_flash_cmd(struct spi_slave *spi, u8 cmd, void *response, size_t len);
  24. /*
  25. * Send a multi-byte command to the device and read the response. Used
  26. * for flash array reads, etc.
  27. */
  28. int spi_flash_cmd_read(struct spi_slave *spi, const u8 *cmd,
  29. size_t cmd_len, void *data, size_t data_len);
  30. int spi_flash_cmd_read_fast(struct spi_flash *flash, u32 offset,
  31. size_t len, void *data);
  32. /*
  33. * Send a multi-byte command to the device followed by (optional)
  34. * data. Used for programming the flash array, etc.
  35. */
  36. int spi_flash_cmd_write(struct spi_slave *spi, const u8 *cmd, size_t cmd_len,
  37. const void *data, size_t data_len);
  38. /*
  39. * Same as spi_flash_cmd_read() except it also claims/releases the SPI
  40. * bus. Used as common part of the ->read() operation.
  41. */
  42. int spi_flash_read_common(struct spi_flash *flash, const u8 *cmd,
  43. size_t cmd_len, void *data, size_t data_len);
  44. /* Send a command to the device and wait for some bit to clear itself. */
  45. int spi_flash_cmd_poll_bit(struct spi_flash *flash, unsigned long timeout,
  46. u8 cmd, u8 poll_bit);
  47. /*
  48. * Send the read status command to the device and wait for the wip
  49. * (write-in-progress) bit to clear itself.
  50. */
  51. int spi_flash_cmd_wait_ready(struct spi_flash *flash, unsigned long timeout);
  52. /* Erase sectors. */
  53. int spi_flash_cmd_erase(struct spi_flash *flash, u8 erase_cmd,
  54. u32 offset, size_t len);
  55. /* Manufacturer-specific probe functions */
  56. struct spi_flash *spi_flash_probe_spansion(struct spi_slave *spi, u8 *idcode);
  57. struct spi_flash *spi_flash_probe_atmel(struct spi_slave *spi, u8 *idcode);
  58. struct spi_flash *spi_flash_probe_eon(struct spi_slave *spi, u8 *idcode);
  59. struct spi_flash *spi_flash_probe_macronix(struct spi_slave *spi, u8 *idcode);
  60. struct spi_flash *spi_flash_probe_sst(struct spi_slave *spi, u8 *idcode);
  61. struct spi_flash *spi_flash_probe_stmicro(struct spi_slave *spi, u8 *idcode);
  62. struct spi_flash *spi_flash_probe_winbond(struct spi_slave *spi, u8 *idcode);
  63. struct spi_flash *spi_fram_probe_ramtron(struct spi_slave *spi, u8 *idcode);