1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071727374757677 |
- /*
- * SPI flash internal definitions
- *
- * Copyright (C) 2008 Atmel Corporation
- */
- /* Common parameters -- kind of high, but they should only occur when there
- * is a problem (and well your system already is broken), so err on the side
- * of caution in case we're dealing with slower SPI buses and/or processors.
- */
- #define SPI_FLASH_PROG_TIMEOUT (2 * CONFIG_SYS_HZ)
- #define SPI_FLASH_PAGE_ERASE_TIMEOUT (5 * CONFIG_SYS_HZ)
- #define SPI_FLASH_SECTOR_ERASE_TIMEOUT (10 * CONFIG_SYS_HZ)
- /* Common commands */
- #define CMD_READ_ID 0x9f
- #define CMD_READ_ARRAY_SLOW 0x03
- #define CMD_READ_ARRAY_FAST 0x0b
- #define CMD_READ_ARRAY_LEGACY 0xe8
- #define CMD_READ_STATUS 0x05
- #define CMD_WRITE_ENABLE 0x06
- /* Common status */
- #define STATUS_WIP 0x01
- /* Send a single-byte command to the device and read the response */
- int spi_flash_cmd(struct spi_slave *spi, u8 cmd, void *response, size_t len);
- /*
- * Send a multi-byte command to the device and read the response. Used
- * for flash array reads, etc.
- */
- int spi_flash_cmd_read(struct spi_slave *spi, const u8 *cmd,
- size_t cmd_len, void *data, size_t data_len);
- int spi_flash_cmd_read_fast(struct spi_flash *flash, u32 offset,
- size_t len, void *data);
- /*
- * Send a multi-byte command to the device followed by (optional)
- * data. Used for programming the flash array, etc.
- */
- int spi_flash_cmd_write(struct spi_slave *spi, const u8 *cmd, size_t cmd_len,
- const void *data, size_t data_len);
- /*
- * Same as spi_flash_cmd_read() except it also claims/releases the SPI
- * bus. Used as common part of the ->read() operation.
- */
- int spi_flash_read_common(struct spi_flash *flash, const u8 *cmd,
- size_t cmd_len, void *data, size_t data_len);
- /* Send a command to the device and wait for some bit to clear itself. */
- int spi_flash_cmd_poll_bit(struct spi_flash *flash, unsigned long timeout,
- u8 cmd, u8 poll_bit);
- /*
- * Send the read status command to the device and wait for the wip
- * (write-in-progress) bit to clear itself.
- */
- int spi_flash_cmd_wait_ready(struct spi_flash *flash, unsigned long timeout);
- /* Erase sectors. */
- int spi_flash_cmd_erase(struct spi_flash *flash, u8 erase_cmd,
- u32 offset, size_t len);
- /* Manufacturer-specific probe functions */
- struct spi_flash *spi_flash_probe_spansion(struct spi_slave *spi, u8 *idcode);
- struct spi_flash *spi_flash_probe_atmel(struct spi_slave *spi, u8 *idcode);
- struct spi_flash *spi_flash_probe_eon(struct spi_slave *spi, u8 *idcode);
- struct spi_flash *spi_flash_probe_macronix(struct spi_slave *spi, u8 *idcode);
- struct spi_flash *spi_flash_probe_sst(struct spi_slave *spi, u8 *idcode);
- struct spi_flash *spi_flash_probe_stmicro(struct spi_slave *spi, u8 *idcode);
- struct spi_flash *spi_flash_probe_winbond(struct spi_slave *spi, u8 *idcode);
- struct spi_flash *spi_fram_probe_ramtron(struct spi_slave *spi, u8 *idcode);
|