include/configs: Use new CONFIG_CMD_* in various E* named board config files.

Signed-off-by: Jon Loeliger <jdl@freescale.com>

include/configs/EB+MCF-EV123.h

@@ -68,17 +68,20 @@
 #define CFG_ENV_IS_IN_FLASH	1
 #endif
 
-/*#define CONFIG_COMMANDS  ( CONFIG_CMD_DFL & ~(CFG_CMD_LOADS | CFG_CMD_LOADB) ) */
-#define CONFIG_COMMANDS  ( CONFIG_CMD_DFL & ~(CFG_CMD_LOADB))
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#undef CONFIG_CMD_LOADB
+
 
 #define CONFIG_BOOTDELAY	5
 #define CFG_PROMPT		"\nEV123 U-Boot> "
 #define	CFG_LONGHELP				/* undef to save memory		*/
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define	CFG_CBSIZE		1024		/* Console I/O Buffer Size	*/
 #else
 #define	CFG_CBSIZE		256		/* Console I/O Buffer Size	*/

include/configs/ELPPC.h

@@ -68,10 +68,15 @@
 
 #define CONFIG_BOOTP_MASK       (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
 
-#define CONFIG_COMMANDS         (CONFIG_CMD_DFL | CFG_CMD_PCI | CFG_CMD_JFFS2)
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_JFFS2
+
 
 /*
  * Miscellaneous configurable options
@@ -84,7 +89,7 @@
  */
 #define CONFIG_CONS_INDEX       1
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE              1024        /* Console I/O Buffer Size */
 #else
 #define CFG_CBSIZE              256         /* Console I/O Buffer Size */
@@ -317,7 +322,7 @@
  * Cache Configuration
  */
 #define CFG_CACHELINE_SIZE        32    /* For all MPC74xx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CACHELINE_SHIFT        5    /* log base 2 of the above value */
 #endif
 

include/configs/ELPT860.h

@@ -91,12 +91,15 @@
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
 #undef	  CFG_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
 
-#define CONFIG_COMMANDS		( CONFIG_CMD_DFL | \
-				  CFG_CMD_ASKENV | \
-				  CFG_CMD_DATE	 )
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DATE
+
 
 /*
  * Miscellaneous configurable options
@@ -104,7 +107,7 @@
 #define CFG_LONGHELP			/* undef to save memory		*/
 #define CFG_PROMPT     "LEOX_elpt860: " /* Monitor Command Prompt	*/
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #  define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
 #  define CFG_CBSIZE	 256		/* Console I/O Buffer Size	*/
@@ -224,7 +227,7 @@
  */
 #define CFG_CACHELINE_SIZE	16	/* For all MPC8xx CPUs		     */
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #  define CFG_CACHELINE_SHIFT	 4	/* log base 2 of the above value     */
 #endif
 

include/configs/EP1C20.h

@@ -160,25 +160,27 @@
 #define CONFIG_IPADDR		192.168.2.21
 #define CONFIG_SERVERIP		192.168.2.16
 
-/*------------------------------------------------------------------------
- * COMMANDS
- *----------------------------------------------------------------------*/
-#define CONFIG_COMMANDS		(CFG_CMD_BDI	| \
-				 CFG_CMD_DHCP	| \
-				 CFG_CMD_ECHO	| \
-				 CFG_CMD_ENV	| \
-				 CFG_CMD_FLASH	| \
-				 CFG_CMD_IMI	| \
-				 CFG_CMD_IRQ	| \
-				 CFG_CMD_LOADS	| \
-				 CFG_CMD_LOADB	| \
-				 CFG_CMD_MEMORY | \
-				 CFG_CMD_MISC	| \
-				 CFG_CMD_NET	| \
-				 CFG_CMD_PING	| \
-				 CFG_CMD_RUN	| \
-				 CFG_CMD_SAVES	)
-#include <cmd_confdefs.h>
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_SAVES
+
+#undef CONFIG_CMD_AUTOSCRIPT
+#undef CONFIG_CMD_BOOTD
+#undef CONFIG_CMD_CONSOLE
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_IMLS
+#undef CONFIG_CMD_ITEST
+#undef CONFIG_CMD_NFS
+#undef CONFIG_CMD_SETGETDCR
+#undef CONFIG_CMD_XIMG
+
 
 /*------------------------------------------------------------------------
  * MISC

include/configs/EP1S10.h

@@ -154,25 +154,26 @@
 #define CONFIG_IPADDR		192.168.2.21
 #define CONFIG_SERVERIP		192.168.2.16
 
-/*------------------------------------------------------------------------
- * COMMANDS
- *----------------------------------------------------------------------*/
-#define CONFIG_COMMANDS		(CFG_CMD_BDI	| \
-				 CFG_CMD_DHCP	| \
-				 CFG_CMD_ECHO	| \
-				 CFG_CMD_ENV	| \
-				 CFG_CMD_FLASH	| \
-				 CFG_CMD_IMI	| \
-				 CFG_CMD_IRQ	| \
-				 CFG_CMD_LOADS	| \
-				 CFG_CMD_LOADB	| \
-				 CFG_CMD_MEMORY | \
-				 CFG_CMD_MISC	| \
-				 CFG_CMD_NET	| \
-				 CFG_CMD_PING	| \
-				 CFG_CMD_RUN	| \
-				 CFG_CMD_SAVES	)
-#include <cmd_confdefs.h>
+
+/*
+ * Command line configuration.
+ */
+#define CONFIG_CMD_BDI
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ECHO
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_IMI
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_LOADS
+#define CONFIG_CMD_LOADB
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_MISC
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_RUN
+#define CONFIG_CMD_SAVES
+
 
 /*------------------------------------------------------------------------
  * MISC

include/configs/EP1S40.h

@@ -154,25 +154,26 @@
 #define CONFIG_IPADDR		192.168.2.21
 #define CONFIG_SERVERIP		192.168.2.16
 
-/*------------------------------------------------------------------------
- * COMMANDS
- *----------------------------------------------------------------------*/
-#define CONFIG_COMMANDS		(CFG_CMD_BDI	| \
-				 CFG_CMD_DHCP	| \
-				 CFG_CMD_ECHO	| \
-				 CFG_CMD_ENV	| \
-				 CFG_CMD_FLASH	| \
-				 CFG_CMD_IMI	| \
-				 CFG_CMD_IRQ	| \
-				 CFG_CMD_LOADS	| \
-				 CFG_CMD_LOADB	| \
-				 CFG_CMD_MEMORY | \
-				 CFG_CMD_MISC	| \
-				 CFG_CMD_NET	| \
-				 CFG_CMD_PING	| \
-				 CFG_CMD_RUN	| \
-				 CFG_CMD_SAVES	)
-#include <cmd_confdefs.h>
+
+/*
+ * Command line configuration.
+ */
+#define CONFIG_CMD_BDI
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ECHO
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_IMI
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_LOADS
+#define CONFIG_CMD_LOADB
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_MISC
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_RUN
+#define CONFIG_CMD_SAVES
+
 
 /*------------------------------------------------------------------------
  * MISC

include/configs/EP88x.h

@@ -50,15 +50,16 @@
 #define CFG_8xx_CPUCLK_MIN		40000000
 #define CFG_8xx_CPUCLK_MAX		133000000
 
-#define CONFIG_COMMANDS		(CONFIG_CMD_DFL  \
-				| CFG_CMD_DHCP   \
-				| CFG_CMD_IMMAP  \
-				| CFG_CMD_MII    \
-				| CFG_CMD_PING   \
-				)
-
-/* This must be included AFTER the definition of CONFIG_COMMANDS */
-#include <cmd_confdefs.h>
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_IMMAP
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+
 
 #define CONFIG_BOOTDELAY	5		/* Autoboot after 5 seconds	*/
 #define CONFIG_BOOTCOMMAND	"bootm fe060000"	/* Autoboot command	*/

include/configs/ERIC.h

@@ -96,23 +96,17 @@
 #define CONFIG_MII		1	/* MII PHY management		*/
 #define CONFIG_PHY_ADDR		1	/* PHY address			*/
 
-#define CONFIG_COMMANDS	       (CONFIG_CMD_DFL	| \
-				CFG_CMD_PCI	| \
-				CFG_CMD_IRQ	| \
-				CFG_CMD_ENV	| \
-				CFG_CMD_FLASH)
 
 /*
- * #define CONFIG_COMMANDS	(CONFIG_CMD_DFL | CFG_CMD_PCI | CFG_CMD_IRQ | \
- *				 CFG_CMD_KGDB | CFG_CMD_I2C | CFG_CMD_EEPROM | \
- *				 CFG_CMD_ENV | CFG_CMD_FLASH)
+ * Command line configuration.
  */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_FLASH
 
-/* CFG_CMD_ENV est definie */
-/*	((CONFIG_CMD_DFL | CFG_CMD_PCI | CFG_CMD_IRQ | CFG_CMD_KGDB) & ~(CFG_CMD_ENV))
- */
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
 
 #undef CONFIG_WATCHDOG			/* watchdog disabled		*/
 
@@ -121,7 +115,7 @@
  */
 #undef	CFG_LONGHELP			/* undef to save memory		*/
 #define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
 #define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
@@ -325,7 +319,7 @@
  */
 #define CFG_DCACHE_SIZE		8192	/* For AMCC 405 CPUs			*/
 #define CFG_CACHELINE_SIZE	32	/* ...			*/
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
 #endif
 
@@ -365,7 +359,7 @@
 #define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
 #define BOOTFLAG_WARM	0x02		/* Software reboot			*/
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif

include/configs/ESTEEM192E.h

@@ -72,8 +72,11 @@
 
 #define CONFIG_BOOTP_MASK	(CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
 
 #define	CFG_LONGHELP			/* undef to save memory		*/
 #define	CFG_PROMPT	"BOOT: "	/* Monitor Command Prompt	*/

include/configs/ETX094.h

@@ -84,15 +84,19 @@
 
 #define CONFIG_BOOTP_MASK	(CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
 
 /*
  * Miscellaneous configurable options
  */
 #define	CFG_LONGHELP			/* undef to save memory		*/
 #define	CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define	CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
 #define	CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
@@ -179,7 +183,7 @@
  * Cache Configuration
  */
 #define CFG_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
 #endif
 

include/configs/EVB64260.h

@@ -107,17 +107,20 @@
 				 CONFIG_BOOTP_BOOTFILESIZE)
 
 
-#define CONFIG_COMMANDS	(CONFIG_CMD_DFL | CFG_CMD_ASKENV)
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
 
 /*
  * Miscellaneous configurable options
  */
 #define	CFG_LONGHELP			/* undef to save memory		*/
 #define	CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define	CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
 #define	CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
@@ -391,7 +394,7 @@
  * Cache Configuration
  */
 #define CFG_CACHELINE_SIZE	32	/* For all MPC74xx CPUs		 */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
 #endif
 

include/configs/EXBITGEN.h

@@ -82,10 +82,12 @@
 #define CONFIG_MII		1	/* MII PHY management		*/
 #define CONFIG_PHY_ADDR		0	/* PHY address			*/
 
-#define CONFIG_COMMANDS		(CONFIG_CMD_DFL)
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
 
 #undef CONFIG_WATCHDOG			/* watchdog disabled		*/
 
@@ -94,7 +96,7 @@
  */
 #define CFG_LONGHELP			/* undef to save memory		*/
 #define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define	CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
 #define	CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
@@ -206,7 +208,7 @@
 #define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
 #define BOOTFLAG_WARM	0x02		/* Software reboot			*/
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif