include/configs: Use new CONFIG_CMD_* in various D* named board config files.

Signed-off-by: Jon Loeliger <jdl@freescale.com>

include/configs/DASA_SIM.h

@@ -57,32 +57,26 @@
 #define CONFIG_IPADDR		10.0.18.222
 #define CONFIG_SERVERIP		10.0.18.190
 
-#if 0
-#define CONFIG_COMMANDS	      ( CONFIG_CMD_DFL	| \
-				CFG_CMD_DHCP	| \
-				CFG_CMD_IRQ	| \
-				CFG_CMD_BSP	| \
-				CFG_CMD_ASKENV	| \
-				CFG_CMD_ELF	)
-#else
-#define CONFIG_COMMANDS	      ( CONFIG_CMD_DFL	| \
-				CFG_CMD_BSP	)
-#endif
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_BSP
+
 
 #if 0 /* Does not appear to be used?!  If it is used, needs to be fixed */
 #define CONFIG_SOFT_I2C			/* Software I2C support enabled */
 #endif
 #define CFG_I2C_EEPROM_ADDR_LEN 1	/* Bytes of address		*/
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
-
 /*
  * Miscellaneous configurable options
  */
 #define CFG_LONGHELP			/* undef to save memory		*/
 #define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
 #define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
@@ -184,7 +178,7 @@
  */
 #define CFG_DCACHE_SIZE		2048	/* For PLX IOP480			*/
 #define CFG_CACHELINE_SIZE	16	/* For AMCC 401/403 CPUs		*/
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
 #endif
 

include/configs/DB64360.h

@@ -239,17 +239,20 @@ ip=${ipaddr}:${serverip}${bootargs_end}; bootm 0x400000;\0"
 #define MTDPARTS_DEFAULT	"mtdparts=db64360-1:-(jffs2)"
 */
 
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL \
-			 | CFG_CMD_ASKENV \
-			 | CFG_CMD_I2C \
-			 | CFG_CMD_EEPROM \
-			 | CFG_CMD_CACHE \
-			 | CFG_CMD_JFFS2 \
-			 | CFG_CMD_PCI \
-			 | CFG_CMD_NET )
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_NET
+
 
 /*
  * Miscellaneous configurable options
@@ -261,7 +264,7 @@ ip=${ipaddr}:${serverip}${bootargs_end}; bootm 0x400000;\0"
 /* #define CFG_GT_DUAL_CPU	 also for JTAG even with one cpu */
 #define CFG_LONGHELP			/* undef to save memory		*/
 #define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
 #define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
@@ -558,7 +561,7 @@ ip=${ipaddr}:${serverip}${bootargs_end}; bootm 0x400000;\0"
  * Cache Configuration
  */
 #define CFG_CACHELINE_SIZE	32	/* For all MPC74xx CPUs		 */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
 #endif
 

include/configs/DB64460.h

@@ -177,17 +177,20 @@ ip=${ipaddr}:${serverip}${bootargs_end}; bootm 0x400000;\0"
 #define MTDPARTS_DEFAULT	"mtdparts=db64460-1:-(jffs2)"
 */
 
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL \
-			 | CFG_CMD_ASKENV \
-			 | CFG_CMD_I2C \
-			 | CFG_CMD_EEPROM \
-			 | CFG_CMD_CACHE \
-			 | CFG_CMD_JFFS2 \
-			 | CFG_CMD_PCI \
-			 | CFG_CMD_NET )
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_NET
+
 
 /*
  * Miscellaneous configurable options
@@ -199,7 +202,7 @@ ip=${ipaddr}:${serverip}${bootargs_end}; bootm 0x400000;\0"
 /* #define CFG_GT_DUAL_CPU	 also for JTAG even with one cpu */
 #define CFG_LONGHELP			/* undef to save memory		*/
 #define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
 #define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
@@ -496,7 +499,7 @@ ip=${ipaddr}:${serverip}${bootargs_end}; bootm 0x400000;\0"
  * Cache Configuration
  */
 #define CFG_CACHELINE_SIZE	32	/* For all MPC74xx CPUs		 */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
 #endif
 

include/configs/DK1C20.h

@@ -446,46 +446,46 @@
 #define CONFIG_NIOS_ASMI			   /* Enable ASMI	*/
 #define CFG_NIOS_ASMIBASE	CFG_NIOS_CPU_ASMI0 /* ASMI base address	*/
 
-/*------------------------------------------------------------------------
- * COMMANDS
- *----------------------------------------------------------------------*/
-#define CONFIG_COMMANDS		(CFG_CMD_ALL & ~( \
-				 CFG_CMD_ASKENV | \
-				 CFG_CMD_BEDBUG | \
-				 CFG_CMD_BMP	| \
-				 CFG_CMD_BSP	| \
-				 CFG_CMD_CACHE	| \
-				 CFG_CMD_DATE	| \
-				 CFG_CMD_DOC	| \
-				 CFG_CMD_DTT	| \
-				 CFG_CMD_EEPROM | \
-				 CFG_CMD_ELF    | \
-				 CFG_CMD_FDC	| \
-				 CFG_CMD_FDOS	| \
-				 CFG_CMD_HWFLOW	| \
-				 CFG_CMD_I2C	| \
-				 CFG_CMD_JFFS2	| \
-				 CFG_CMD_KGDB	| \
-				 CFG_CMD_NAND	| \
-				 CFG_CMD_NFS	| \
-				 CFG_CMD_MMC	| \
-				 CFG_CMD_MII	| \
-				 CFG_CMD_PCI	| \
-				 CFG_CMD_PCMCIA | \
-				 CFG_CMD_REISER	| \
-				 CFG_CMD_SCSI	| \
-				 CFG_CMD_SPI	| \
-				 CFG_CMD_VFD	| \
-				 CFG_CMD_USB	| \
-				 CFG_CMD_XIMG	) )
-
-
-#include <cmd_confdefs.h>
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_all.h>
+
+#undef CONFIG_CMD_ASKENV
+#undef CONFIG_CMD_BEDBUG
+#undef CONFIG_CMD_BMP
+#undef CONFIG_CMD_BSP
+#undef CONFIG_CMD_CACHE
+#undef CONFIG_CMD_DATE
+#undef CONFIG_CMD_DOC
+#undef CONFIG_CMD_DTT
+#undef CONFIG_CMD_EEPROM
+#undef CONFIG_CMD_ELF
+#undef CONFIG_CMD_FDC
+#undef CONFIG_CMD_FDOS
+#undef CONFIG_CMD_HWFLOW
+#undef CONFIG_CMD_I2C
+#undef CONFIG_CMD_JFFS2
+#undef CONFIG_CMD_KGDB
+#undef CONFIG_CMD_NAND
+#undef CONFIG_CMD_NFS
+#undef CONFIG_CMD_MMC
+#undef CONFIG_CMD_MII
+#undef CONFIG_CMD_PCI
+#undef CONFIG_CMD_PCMCIA
+#undef CONFIG_CMD_REISER
+#undef CONFIG_CMD_SCSI
+#undef CONFIG_CMD_SPI
+#undef CONFIG_CMD_VFD
+#undef CONFIG_CMD_USB
+#undef CONFIG_CMD_XIMG
+
 
 /*------------------------------------------------------------------------
  * COMPACT FLASH
  *----------------------------------------------------------------------*/
-#if (CONFIG_COMMANDS & CFG_CMD_IDE)
+#if defined(CONFIG_CMD_IDE)
 #define CONFIG_IDE_PREINIT			/* Implement id_preinit	*/
 #define CFG_IDE_MAXBUS		1		/* 1 IDE bus		*/
 #define CFG_IDE_MAXDEVICE	1		/* 1 drive per IDE bus	*/
@@ -503,12 +503,12 @@
 #define CFG_CF_POWER		0x009209c0	/* CF Power FET PIO base*/
 #define CFG_CF_ATASEL		0x009209d0	/* CF ATASEL PIO base	*/
 
-#endif /* CONFIG_COMMANDS & CFG_CMD_IDE */
+#endif
 
 /*------------------------------------------------------------------------
  * KGDB
  *----------------------------------------------------------------------*/
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	9600
 #endif
 

include/configs/DK1S10.h

@@ -454,47 +454,46 @@
 
 #endif	/* CFG_NIOS_CPU_PIO_NUMS */
 
-/*------------------------------------------------------------------------
- * COMMANDS
- *----------------------------------------------------------------------*/
-#define CONFIG_COMMANDS		(CFG_CMD_ALL & ~( \
-				 CFG_CMD_ASKENV | \
-				 CFG_CMD_BEDBUG | \
-				 CFG_CMD_BMP	| \
-				 CFG_CMD_BSP	| \
-				 CFG_CMD_CACHE	| \
-				 CFG_CMD_DATE	| \
-				 CFG_CMD_DOC	| \
-				 CFG_CMD_DTT	| \
-				 CFG_CMD_EEPROM | \
-				 CFG_CMD_ELF    | \
-				 CFG_CMD_FAT	| \
-				 CFG_CMD_FDC	| \
-				 CFG_CMD_FDOS	| \
-				 CFG_CMD_HWFLOW	| \
-				 CFG_CMD_IDE	| \
-				 CFG_CMD_I2C	| \
-				 CFG_CMD_JFFS2	| \
-				 CFG_CMD_KGDB	| \
-				 CFG_CMD_NAND	| \
-				 CFG_CMD_NFS	| \
-				 CFG_CMD_MMC	| \
-				 CFG_CMD_MII	| \
-				 CFG_CMD_PCI	| \
-				 CFG_CMD_PCMCIA | \
-				 CFG_CMD_SCSI	| \
-				 CFG_CMD_SPI	| \
-				 CFG_CMD_VFD	| \
-				 CFG_CMD_USB	| \
-				 CFG_CMD_XIMG	) )
-
-
-#include <cmd_confdefs.h>
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_all.h>
+
+#undef CONFIG_CMD_ASKENV
+#undef COND_CMD_BEDBUG
+#undef COND_CMD_BMP
+#undef COND_CMD_BSP
+#undef COND_CMD_CACHE
+#undef COND_CMD_DATE
+#undef COND_CMD_DOC
+#undef COND_CMD_DTT
+#undef COND_CMD_EEPROM
+#undef COND_CMD_ELF
+#undef COND_CMD_FAT
+#undef COND_CMD_FDC
+#undef COND_CMD_FDOS
+#undef COND_CMD_HWFLOW
+#undef COND_CMD_IDE
+#undef COND_CMD_I2C
+#undef COND_CMD_JFFS2
+#undef COND_CMD_KGDB
+#undef COND_CMD_NAND
+#undef COND_CMD_NFS
+#undef COND_CMD_MMC
+#undef COND_CMD_MII
+#undef COND_CMD_PCI
+#undef COND_CMD_PCMCIA
+#undef COND_CMD_SCSI
+#undef COND_CMD_SPI
+#undef COND_CMD_VFD
+#undef COND_CMD_USB
+#undef COND_CMD_XIMG
+
 
 /*------------------------------------------------------------------------
  * KGDB
  *----------------------------------------------------------------------*/
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	9600
 #endif
 

include/configs/DP405.h

@@ -55,17 +55,20 @@
 #define CONFIG_MII		1	/* MII PHY management		*/
 #define CONFIG_PHY_ADDR		0	/* PHY address			*/
 
-#define CONFIG_COMMANDS	      ( CONFIG_CMD_DFL	| \
-				CFG_CMD_BSP	| \
-				CFG_CMD_DHCP	| \
-				CFG_CMD_IRQ	| \
-				CFG_CMD_ELF	| \
-				CFG_CMD_DATE	| \
-				CFG_CMD_I2C	| \
-				CFG_CMD_EEPROM	)
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_BSP
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_EEPROM
+
 
 #undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
 
@@ -87,7 +90,7 @@
 #define CFG_PROMPT_HUSH_PS2	"> "
 #endif
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
 #define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
@@ -235,7 +238,7 @@
 #define CFG_DCACHE_SIZE		16384	/* For AMCC 405 CPUs, older 405 ppc's	*/
 					/* have only 8kB, 16kB is save here	*/
 #define CFG_CACHELINE_SIZE	32	/* ...			*/
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
 #endif
 

include/configs/DU405.h

@@ -58,21 +58,24 @@
 #define CONFIG_PHY_ADDR		0	/* PHY address			*/
 #define CONFIG_LXT971_NO_SLEEP  1       /* disable sleep mode in LXT971 */
 
-#define CONFIG_COMMANDS	      ( CONFIG_CMD_DFL	| \
-				CFG_CMD_PCI	| \
-				CFG_CMD_IRQ	| \
-				CFG_CMD_IDE	| \
-				CFG_CMD_ELF	| \
-				CFG_CMD_MII	| \
-				CFG_CMD_DATE	| \
-				CFG_CMD_EEPROM	)
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_EEPROM
+
 
 #define CONFIG_MAC_PARTITION
 #define CONFIG_DOS_PARTITION
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
-
 #undef CONFIG_WATCHDOG			/* watchdog disabled		*/
 
 #define CONFIG_RTC_MC146818		/* BQ3285 is MC146818 compatible*/
@@ -85,7 +88,7 @@
  */
 #define CFG_LONGHELP			/* undef to save memory		*/
 #define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
 #define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
@@ -225,7 +228,7 @@
  */
 #define CFG_DCACHE_SIZE		8192	/* For AMCC 405 CPUs			*/
 #define CFG_CACHELINE_SIZE	32	/* ...			*/
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
 #endif