include/configs: Use new CONFIG_CMD_* in various 5200 board config files.

Signed-off-by: Jon Loeliger <jdl@freescale.com>

include/configs/TB5200.h

@@ -42,11 +42,6 @@
 #define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH  */
 #define BOOTFLAG_WARM		0x02	/* Software reboot	     */
 
-#define CFG_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
-#endif
-
 /*
  * Serial console configuration
  */
@@ -72,12 +67,6 @@
 #define CFG_CONSOLE_IS_IN_ENV
 #endif
 
-#ifdef CONFIG_VIDEO
-#define ADD_BMP_CMD		CFG_CMD_BMP
-#else
-#define ADD_BMP_CMD		0
-#endif
-
 /* Partitions */
 #define CONFIG_MAC_PARTITION
 #define CONFIG_DOS_PARTITION
@@ -85,7 +74,6 @@
 
 /* USB */
 #define CONFIG_USB_OHCI
-#define ADD_USB_CMD		CFG_CMD_USB | CFG_CMD_FAT
 #define CONFIG_USB_STORAGE
 
 /* POST support */
@@ -101,34 +89,35 @@
 #define CFG_CMD_POST_DIAG 0
 #endif
 
-/* IDE */
-#define ADD_IDE_CMD		(CFG_CMD_IDE | CFG_CMD_FAT | CFG_CMD_EXT2)
 
 /*
- * Supported commands
+ * Command line configuration.
  */
-#define CONFIG_COMMANDS	       (CONFIG_CMD_DFL	| \
-				ADD_BMP_CMD	| \
-				ADD_IDE_CMD	| \
-				ADD_PCI_CMD	| \
-				ADD_USB_CMD	| \
-				CFG_CMD_ASKENV	| \
-				CFG_CMD_DATE	| \
-				CFG_CMD_DHCP	| \
-				CFG_CMD_ECHO	| \
-				CFG_CMD_EEPROM	| \
-				CFG_CMD_I2C	| \
-				CFG_CMD_JFFS2	| \
-				CFG_CMD_MII	| \
-				CFG_CMD_NFS	| \
-				CFG_CMD_PING	| \
-				CFG_CMD_POST_DIAG | \
-				CFG_CMD_REGINFO | \
-				CFG_CMD_SNTP	| \
-				CFG_CMD_BSP)
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+#include <config_cmd_default.h>
+
+#ifdef CONFIG_VIDEO
+#define CONFIG_CMD_BMP
+#endif
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ECHO
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_POST_DIAG
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_SNTP
+#define CONFIG_CMD_BSP
+#define CONFIG_CMD_USB
+
 
 #define	CONFIG_TIMESTAMP		/* display image timestamps */
 
@@ -394,7 +383,7 @@
  */
 #define CFG_LONGHELP			/* undef to save memory	    */
 #define CFG_PROMPT		"=> "	/* Monitor Command Prompt   */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE		1024	/* Console I/O Buffer Size  */
 #else
 #define CFG_CBSIZE		256	/* Console I/O Buffer Size  */
@@ -403,6 +392,11 @@
 #define CFG_MAXARGS		16	/* max number of command args	*/
 #define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
 
+#define CFG_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
+#if defined(CONFIG_CMD_KGDB)
+#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
+#endif
+
 /* Enable an alternate, more extensive memory test */
 #define CFG_ALT_MEMTEST
 

include/configs/TOP5200.h

@@ -50,11 +50,6 @@
 #define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH  */
 #define BOOTFLAG_WARM		0x02	/* Software reboot	     */
 
-#define CFG_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
-#endif
-
 /*
  * Serial console configuration
  */
@@ -81,12 +76,6 @@
 #  define CONFIG_PCI_IO_PHYS	CONFIG_PCI_IO_BUS
 #  define CONFIG_PCI_IO_SIZE	0x01000000
 
-#  define ADD_PCI_CMD 		CFG_CMD_PCI
-
-#else	/* no Evaluation board */
-
-#  define ADD_PCI_CMD		0  /* no CFG_CMD_PCI */
-
 #endif
 
 /* USB */
@@ -99,49 +88,40 @@
 #  else
 #    define CONFIG_USB_CONFIG	0x00001000
 #  endif
-#  define ADD_USB_CMD             CFG_CMD_USB | CFG_CMD_FAT
 #  define CONFIG_DOS_PARTITION
 #  define CONFIG_USB_STORAGE
 
-#else
-
-#  define ADD_USB_CMD		0
-
 #endif
 
 /* IDE */
 #if defined (CONFIG_EVAL5200) || defined (CONFIG_LITE5200)
-
-#  define ADD_IDE_CMD             CFG_CMD_IDE | CFG_CMD_FAT
 #  define CONFIG_DOS_PARTITION
+#endif
 
-#else
 
-#  define ADD_IDE_CMD		0
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_BEDBUG
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IMMAP
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_REGINFO
 
+#if defined (CONFIG_EVAL5200) || defined (CONFIG_LITE5200)
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_USB
+#define CONFIG_CMD_PCI
 #endif
 
-/*
- * Supported commands
- */
-#define CONFIG_COMMANDS	      ( CONFIG_CMD_DFL	| \
-				ADD_PCI_CMD	| \
-				ADD_USB_CMD	| \
-				ADD_IDE_CMD	| \
-				CFG_CMD_ASKENV	| \
-				CFG_CMD_DATE	| \
-				CFG_CMD_DHCP	| \
-				CFG_CMD_I2C	| \
-				CFG_CMD_EEPROM	| \
-				CFG_CMD_REGINFO	| \
-				CFG_CMD_IMMAP	| \
-				CFG_CMD_ELF	| \
-				CFG_CMD_MII 	| \
-				CFG_CMD_BEDBUG	\
-			      )
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
 
 /*
  * MUST be low boot - HIGHBOOT is not supported anymore
@@ -336,7 +316,7 @@
  */
 #define CFG_LONGHELP			/* undef to save memory	    */
 #define CFG_PROMPT		"=> "	/* Monitor Command Prompt   */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #  define CFG_CBSIZE		1024	/* Console I/O Buffer Size  */
 #else
 #  define CFG_CBSIZE		256	/* Console I/O Buffer Size  */
@@ -352,6 +332,12 @@
 
 #define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */
 
+#define CFG_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
+#if defined(CONFIG_CMD_KGDB)
+#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
+#endif
+
+
 #ifdef CONFIG_EVAL5200		/* M48T08 is available with the Evaluation board only */
   #define CONFIG_RTC_MK48T59	1	/* use M48T08 on EVAL5200 */
   #define RTC(reg)		(0xf0010000+reg)

include/configs/Total5200.h

@@ -48,11 +48,6 @@
 #define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH  */
 #define BOOTFLAG_WARM		0x02	/* Software reboot	     */
 
-#define CFG_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
-#endif
-
 /*
  * Serial console configuration
  */
@@ -63,7 +58,6 @@
 /*
  * Video console
  */
-#if 1
 #define CONFIG_VIDEO
 #define CONFIG_VIDEO_SED13806
 #define CONFIG_VIDEO_SED13806_16BPP
@@ -76,10 +70,6 @@
 #define CONFIG_VIDEO_SW_CURSOR
 #define CONFIG_SPLASH_SCREEN
 
-#define ADD_VIDEO_CMD	CFG_CMD_BMP
-#else
-#define ADD_VIDEO_CMD	0
-#endif
 
 #ifdef CONFIG_MPC5200	/* MGT5100 PCI is not supported yet. */
 /*
@@ -105,12 +95,9 @@
 #define CFG_RX_ETH_BUFFER	8  /* use 8 rx buffer on eepro100  */
 #define CONFIG_NS8382X		1
 
-#define ADD_PCI_CMD 		CFG_CMD_PCI
-
 #else	/* MGT5100 */
 
 #define CONFIG_MII		1
-#define ADD_PCI_CMD		0  /* no CFG_CMD_PCI */
 
 #endif
 
@@ -119,29 +106,27 @@
 #define CONFIG_DOS_PARTITION
 
 /* USB */
-#if 1
 #define CONFIG_USB_OHCI
-#define ADD_USB_CMD             CFG_CMD_USB | CFG_CMD_FAT
 #define CONFIG_USB_STORAGE
-#else
-#define ADD_USB_CMD             0
-#endif
+
 
 /*
- * Supported commands
+ * Command line configuration.
  */
-#define CONFIG_COMMANDS		(CONFIG_CMD_DFL	| \
-				 CFG_CMD_PING	| \
-				 CFG_CMD_I2C	| \
-				 CFG_CMD_EEPROM	| \
-				 CFG_CMD_FAT	| \
-				 CFG_CMD_IDE	| \
-				 ADD_VIDEO_CMD  | \
-				 ADD_PCI_CMD	| \
-				 ADD_USB_CMD)
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+#include <config_cmd_default.h>
+
+#if definded(CONFIG_MPC5200)
+    #define CONFIG_CMD_PCI
+#endif
+
+#define CONFIG_CMD_BMP
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_USB
+
 
 #if (TEXT_BASE == 0xFE000000)		/* Boot low */
 #   define CFG_LOWBOOT		1
@@ -303,7 +288,7 @@
  */
 #define CFG_LONGHELP			/* undef to save memory	    */
 #define CFG_PROMPT		"=> "	/* Monitor Command Prompt   */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE		1024	/* Console I/O Buffer Size  */
 #else
 #define CFG_CBSIZE		256	/* Console I/O Buffer Size  */
@@ -319,6 +304,12 @@
 
 #define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */
 
+#define CFG_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
+#if defined(CONFIG_CMD_KGDB)
+#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
+#endif
+
+
 /*
  * Various low-level settings
  */

include/configs/cpci5200.h

@@ -50,11 +50,6 @@
 #define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH  */
 #define BOOTFLAG_WARM		0x02	/* Software reboot	     */
 
-#define CFG_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
-#endif
-
 /*
  * Serial console configuration
  */
@@ -92,12 +87,6 @@
 #define CONFIG_NS8382X		1
 #endif
 
-#define ADD_PCI_CMD		CFG_CMD_PCI
-
-#else				/* MPC5100 */
-
-#define ADD_PCI_CMD		0	/* no CFG_CMD_PCI */
-
 #endif
 
 /* Partitions */
@@ -107,28 +96,29 @@
 /* USB */
 #if 0
 #define CONFIG_USB_OHCI
-#define ADD_USB_CMD		CFG_CMD_USB | CFG_CMD_FAT
 #define CONFIG_USB_STORAGE
-#else
-#define ADD_USB_CMD		0
 #endif
 
+
 /*
- * Supported commands
+ * Command line configuration.
  */
-#define CONFIG_COMMANDS		(CONFIG_CMD_DFL	| \
-				 CFG_CMD_EEPROM	| \
-				 CFG_CMD_FAT	| \
-				 CFG_CMD_IDE	| \
-				 CFG_CMD_I2C	| \
-				 CFG_CMD_BSP	| \
-				 CFG_CMD_ELF	| \
-				 CFG_CMD_EXT2	| \
-				 CFG_CMD_DATE	| \
-				 ADD_PCI_CMD	  )
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+#include <config_cmd_default.h>
+
+#if defined(CONFIG_PCI)
+#define CONFIG_CMD_PCI
+#endif
+
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_BSP
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_DATE
+
+
 
 #if (TEXT_BASE == 0xFF000000)	/* Boot low with 16 MB Flash */
 #   define CFG_LOWBOOT		1
@@ -277,7 +267,7 @@
  */
 #define CFG_LONGHELP		/* undef to save memory	    */
 #define CFG_PROMPT		"=> "	/* Monitor Command Prompt   */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE		1024	/* Console I/O Buffer Size  */
 #else
 #define CFG_CBSIZE		256	/* Console I/O Buffer Size  */
@@ -295,6 +285,11 @@
 
 #define CFG_VXWORKS_MAC_PTR	0x00000000	/* Pass Ethernet MAC to VxWorks */
 
+#define CFG_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
+#if defined(CONFIG_CMD_KGDB)
+#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
+#endif
+
 /*
  * Various low-level settings
  */

include/configs/mecp5200.h

@@ -50,11 +50,6 @@
 #define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH  */
 #define BOOTFLAG_WARM		0x02	/* Software reboot	     */
 
-#define CFG_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
-#endif
-
 /*
  * Serial console configuration
  */
@@ -88,26 +83,23 @@
 /* USB */
 #if 0
 #define CONFIG_USB_OHCI
-#define ADD_USB_CMD		CFG_CMD_USB | CFG_CMD_FAT
 #define CONFIG_USB_STORAGE
-#else
-#define ADD_USB_CMD		0
 #endif
 
+
 /*
- * Supported commands
+ * Command line configuration.
  */
-#define CONFIG_COMMANDS		(CONFIG_CMD_DFL	| \
-				 CFG_CMD_EEPROM	| \
-				 CFG_CMD_FAT	| \
-				 CFG_CMD_EXT2	| \
-				 CFG_CMD_I2C	| \
-				 CFG_CMD_IDE	| \
-				 CFG_CMD_BSP	| \
-				 CFG_CMD_ELF)
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_BSP
+#define CONFIG_CMD_ELF
+
 
 #if (TEXT_BASE == 0xFF000000)		/* Boot low with 16 MB Flash */
 #   define CFG_LOWBOOT		1
@@ -258,7 +250,7 @@
  */
 #define CFG_LONGHELP			/* undef to save memory	    */
 #define CFG_PROMPT		"=> "	/* Monitor Command Prompt   */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE		1024	/* Console I/O Buffer Size  */
 #else
 #define CFG_CBSIZE		256	/* Console I/O Buffer Size  */
@@ -276,6 +268,11 @@
 
 #define CFG_VXWORKS_MAC_PTR	0x00000000	/* Pass Ethernet MAC to VxWorks */
 
+#define CFG_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
+#if defined(CONFIG_CMD_KGDB)
+#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
+#endif
+
 /*
  * Various low-level settings
  */

include/configs/pf5200.h

@@ -49,11 +49,6 @@
 #define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH  */
 #define BOOTFLAG_WARM		0x02	/* Software reboot	     */
 
-#define CFG_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
-#endif
-
 /*
  * Serial console configuration
  */
@@ -112,20 +107,20 @@
 #define ADD_USB_CMD		0
 #endif
 
+
 /*
- * Supported commands
+ * Command line configuration.
  */
-#define CONFIG_COMMANDS		(CONFIG_CMD_DFL	| \
-				 CFG_CMD_EEPROM	| \
-				 CFG_CMD_FAT	| \
-				 CFG_CMD_I2C	| \
-				 CFG_CMD_IDE	| \
-				 CFG_CMD_BSP	| \
-				 CFG_CMD_ELF	| \
-				 ADD_PCI_CMD	  )
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_BSP
+#define CONFIG_PCI_CMD
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IDE
+
 
 #if (TEXT_BASE == 0xFF000000)	/* Boot low with 16 MB Flash */
 #   define CFG_LOWBOOT		1
@@ -263,7 +258,7 @@
  */
 #define CFG_LONGHELP		/* undef to save memory	    */
 #define CFG_PROMPT		"=> "	/* Monitor Command Prompt   */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE		1024	/* Console I/O Buffer Size  */
 #else
 #define CFG_CBSIZE		256	/* Console I/O Buffer Size  */
@@ -281,6 +276,11 @@
 
 #define CFG_VXWORKS_MAC_PTR	0x00000000	/* Pass Ethernet MAC to VxWorks */
 
+#define CFG_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
+#if defined(CONFIG_CMD_KGDB)
+#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
+#endif
+
 /*
  * Various low-level settings
  */

include/configs/r5200.h

@@ -66,10 +66,18 @@
 #define CFG_ENV_IS_IN_FLASH	1
 #endif
 
-#define CONFIG_COMMANDS	 ((CONFIG_CMD_DFL | CFG_CMD_PING | CFG_CMD_NET ) & ~(CFG_CMD_LOADS | CFG_CMD_LOADB))
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_NET
+
+#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_LOADB
+
 
 /* Note: We only copy one sectors worth of application code from location
  * 10200000 for speed purposes.  Increase the size if necessary */
@@ -79,7 +87,7 @@
 #define CFG_PROMPT		"u-boot> "
 #define CFG_LONGHELP				/* undef to save memory		*/
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE		1024		/* Console I/O Buffer Size	*/
 #else
 #define CFG_CBSIZE		256		/* Console I/O Buffer Size	*/