* Make sure Block Lock Bits get cleared in R360MPI flash driver

* MPC823 LCD driver: Fill color map backwards, to allow for steady
  display when Linux takes over

* Patch by Erwin Rol, 27 Feb 2003:
  Add support for RTEMS (this time for real).

* Add support for "bmp info" and "bmp display" commands to load
  bitmap images; this can be used (for example in a "preboot"
  command) to display a splash screen very quickly after poweron.

* Add support for 133 MHz clock on INCA-IP board

CHANGELOG

@@ -2,6 +2,20 @@
 Changes since U-Boot 0.3.0:
 ======================================================================
 
+* Make sure Block Lock Bits get cleared in R360MPI flash driver
+
+* MPC823 LCD driver: Fill color map backwards, to allow for steady
+  display when Linux takes over
+
+* Patch by Erwin Rol, 27 Feb 2003:
+  Add support for RTEMS (this time for real).
+
+* Add support for "bmp info" and "bmp display" commands to load
+  bitmap images; this can be used (for example in a "preboot"
+  command) to display a splash screen very quickly after poweron.
+
+* Add support for 133 MHz clock on INCA-IP board
+
 * Patch by Lutz Dennig, 10 Apr 2003:
   Update for R360MPI board
 

CREDITS

@@ -238,6 +238,10 @@ N: Stefan Roese
 E: stefan.roese@esd-electronics.com
 D: IBM PPC401/403/405GP Support; Windows environment support
 
+N: Erwin Rol
+E: erwin@muffin.org
+D: boot support for RTEMS
+
 N: Neil Russell
 E: caret@c-side.com
 D: Author of LiMon-1.4.2, which contributed some ideas

README

@@ -789,6 +789,18 @@ The following options need to be configured:
 		Normally display is black on white background; define
 		CFG_WHITE_ON_BLACK to get it inverted.
 
+- Spash Screen Support: CONFIG_SPLASH_SCREEN
+
+                If this option is set, the environment is checked for
+                a variable "splashimage". If found, the usual display
+                of logo, copyright and system information on the LCD
+                is supressed and the BMP image at the address
+                specified in "splashimage" is loaded instead. The
+                console is redirected to the "nulldev", too. This
+                allows for a "silent" boot where a splash screen is
+                loaded very quickly after power-on.
+
+
 - Ethernet address:
 		CONFIG_ETHADDR
 		CONFIG_ETH2ADDR

board/incaip/memsetup.S

@@ -49,13 +49,11 @@
 #define MC_LATENCY(value)       0x1038(value)
 #define MC_TREFRESH(value)      0x1040(value)
 
-#if CPU_CLOCK_RATE==150000000   /* 150 MHz clock for the MIPS core */
 #define CGU_MODUL_BASE          0xBF107000
 #define CGU_PLL1CR(value)       0x0008(value)
 #define CGU_DIVCR(value)        0x0010(value)
 #define CGU_MUXCR(value)        0x0014(value)
 #define CGU_PLL1SR(value)       0x000C(value)
-#endif
 
 	.globl	memsetup
 memsetup:
@@ -67,12 +65,12 @@ memsetup:
 	li	t1, 0xA0000041
 	sw	t1, EBU_ADDSEL0(t0)
 
-#if CPU_CLOCK_RATE==150000000   /* 150 MHz clock for the MIPS core */
-	li	t1, 0xA841417E
-	sw	t1, EBU_BUSCON0(t0)   /* value set up by magic flash word */
+#if CPU_CLOCK_RATE==100000000	/* 100 MHz clock for the MIPS core */
+	lw	t1, EBU_BUSCON0(t0)  /* value set up by magic flash word */
 	sw	t1, EBU_BUSCON2(t0)
-#else /* 100 MHz */
-	lw	t1, EBU_BUSCON0(t0)   /* value set up by magic flash word */
+#else /* 150 MHz or 133 MHz */
+	li	t1, 0x8841417E
+	sw	t1, EBU_BUSCON0(t0)
 	sw	t1, EBU_BUSCON2(t0)
 #endif
 
@@ -85,10 +83,10 @@ memsetup:
 	li	t1, 0xBE0000F1
  	sw	t1, EBU_ADDSEL1(t0)
 
-#if CPU_CLOCK_RATE==150000000   /* 150 MHz clock for the MIPS core */
-	li	t1, 0x684143FD
-#else /* 100 MHz */
+#if CPU_CLOCK_RATE==100000000   /* 100 MHz clock for the MIPS core */
 	li	t1, 0x684142BD
+#else /* 150 MHz or 133 MHz */
+	li	t1, 0x684143FD
 #endif
  	sw	t1, EBU_BUSCON1(t0)
 
@@ -105,6 +103,14 @@ b1:
 	beq     t1, zero, b1
 	li      t1, 0x80000001
 	sw      t1, CGU_MUXCR(t0)
+#elif CPU_CLOCK_RATE==133000000	/* 133 MHz clock for the MIPS core */
+	li	t0, CGU_MODUL_BASE
+	li	t1, 0x80000054
+	sw	t1, CGU_DIVCR(t0)
+	li	t1, 0x80000000
+	sw	t1, CGU_MUXCR(t0)
+	li	t1, 0x800B0001
+	sw	t1, CGU_PLL1CR(t0)
 #endif
 
 	/* SDRAM Initialization.

board/r360mpi/flash.c

@@ -206,6 +206,12 @@ static ulong flash_get_size (FPW * addr, flash_info_t * info)
 {
 	FPW value;
 
+	/* Make sure Block Lock Bits get cleared */
+	addr[0] = (FPW) 0x00FF00FF;
+	addr[0] = (FPW) 0x00600060;
+	addr[0] = (FPW) 0x00D000D0;
+	addr[0] = (FPW) 0x00FF00FF;
+
 	/* Write auto select command: read Manufacturer ID */
 	addr[0x5555] = (FPW) 0x00AA00AA;
 	addr[0x2AAA] = (FPW) 0x00550055;

board/r360mpi/r360mpi.c

@@ -126,12 +126,12 @@ long int initdram (int board_type)
 	memctl->memc_mar = 0x00000088;
 
 	/*
-	 * Map controller bank 2 to the SDRAM bank at
+	 * Map controller bank 1 to the SDRAM bank at
 	 * preliminary address - these have to be modified after the
 	 * SDRAM size has been determined.
 	 */
-	memctl->memc_or2 = CFG_OR2_PRELIM;
-	memctl->memc_br2 = CFG_BR2_PRELIM;
+	memctl->memc_or1 = CFG_OR1_PRELIM;
+	memctl->memc_br1 = CFG_BR1_PRELIM;
 
 	memctl->memc_mamr = CFG_MAMR_8COL & (~(MAMR_PTAE));	/* no refresh yet */
 
@@ -139,9 +139,9 @@ long int initdram (int board_type)
 
 	/* perform SDRAM initializsation sequence */
 
-	memctl->memc_mcr = 0x80004105;	/* SDRAM bank 0 */
+	memctl->memc_mcr = 0x80002105;	/* SDRAM bank 0 */
 	udelay (200);
-	memctl->memc_mcr = 0x80004230;	/* SDRAM bank 0 - execute twice */
+	memctl->memc_mcr = 0x80002230;	/* SDRAM bank 0 - execute twice */
 	udelay (200);
 
 	memctl->memc_mamr |= MAMR_PTAE;	/* enable refresh */
@@ -153,7 +153,7 @@ long int initdram (int board_type)
 	 *
 	 * try 8 column mode
 	 */
-	size8 = dram_size (CFG_MAMR_8COL, (ulong *) SDRAM_BASE2_PRELIM,
+	size8 = dram_size (CFG_MAMR_8COL, (ulong *) SDRAM_BASE1_PRELIM,
 					   SDRAM_MAX_SIZE);
 
 	udelay (1000);
@@ -161,13 +161,13 @@ long int initdram (int board_type)
 	/*
 	 * try 9 column mode
 	 */
-	size9 = dram_size (CFG_MAMR_9COL, (ulong *) SDRAM_BASE2_PRELIM,
+	size9 = dram_size (CFG_MAMR_9COL, (ulong *) SDRAM_BASE1_PRELIM,
 					   SDRAM_MAX_SIZE);
 
 	if (size8 < size9) {		/* leave configuration at 9 columns */
 		size_b0 = size9;
 /*	debug ("SDRAM Bank 0 in 9 column mode: %ld MB\n", size >> 20);	*/
-	} else {			/* back to 8 columns            */
+	} else {					/* back to 8 columns            */
 		size_b0 = size8;
 		memctl->memc_mamr = CFG_MAMR_8COL;
 		udelay (500);
@@ -200,47 +200,6 @@ long int initdram (int board_type)
 
 	udelay (10000);
 
-#ifdef CONFIG_CAN_DRIVER
-	/* Initialize OR3 / BR3 */
-	memctl->memc_or3 = CFG_OR3_CAN;		/* switch GPLB_5 to GPLA_5 */
-	memctl->memc_br3 = CFG_BR3_CAN;
-
-	/* Initialize MBMR */
-	memctl->memc_mbmr = MAMR_GPL_B4DIS;	/* GPL_B4 works as UPWAITB */
-
-	/* Initialize UPMB for CAN: single read */
-	memctl->memc_mdr = 0xFFFFC004;
-	memctl->memc_mcr = 0x0100 | UPMB;
-
-	memctl->memc_mdr = 0x0FFFD004;
-	memctl->memc_mcr = 0x0101 | UPMB;
-
-	memctl->memc_mdr = 0x0FFFC000;
-	memctl->memc_mcr = 0x0102 | UPMB;
-
-	memctl->memc_mdr = 0x3FFFC004;
-	memctl->memc_mcr = 0x0103 | UPMB;
-
-	memctl->memc_mdr = 0xFFFFDC05;
-	memctl->memc_mcr = 0x0104 | UPMB;
-
-	/* Initialize UPMB for CAN: single write */
-	memctl->memc_mdr = 0xFFFCC004;
-	memctl->memc_mcr = 0x0118 | UPMB;
-
-	memctl->memc_mdr = 0xCFFCD004;
-	memctl->memc_mcr = 0x0119 | UPMB;
-
-	memctl->memc_mdr = 0x0FFCC000;
-	memctl->memc_mcr = 0x011A | UPMB;
-
-	memctl->memc_mdr = 0x7FFCC004;
-	memctl->memc_mcr = 0x011B | UPMB;
-
-	memctl->memc_mdr = 0xFFFDCC05;
-	memctl->memc_mcr = 0x011C | UPMB;
-#endif
-
 	return (size_b0);
 }
 
@@ -254,8 +213,8 @@ long int initdram (int board_type)
  * - short between data lines
  */
 
-static long int dram_size (long int mamr_value,
-			   long int *base, long int maxsize)
+static long int dram_size (long int mamr_value, long int *base,
+						   long int maxsize)
 {
 	volatile immap_t *immap = (immap_t *) CFG_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
@@ -298,10 +257,10 @@ static long int dram_size (long int mamr_value,
 
 /* ------------------------------------------------------------------------- */
 
-void r360_i2c_lcd_write (uchar data0, uchar data1)
+void r360_pwm_write (uchar reg, uchar val)
 {
-	if (i2c_write (CFG_I2C_LCD_ADDR, data0, 1, &data1, 1)) {
-		printf("Can't write lcd data 0x%02X 0x%02X.\n", data0, data1);
+	if (i2c_write (CFG_I2C_PWM_ADDR, reg, 1, &val, 1)) {
+		printf ("Can't write PWM register 0x%02X.\n", reg);
 	}
 }
 
@@ -312,8 +271,10 @@ void r360_i2c_lcd_write (uchar data0, uchar data1)
  */
 
 /* Number of bytes returned from Keyboard Controller */
-#define KEYBD_KEY_MAX	16				/* maximum key number */
-#define KEYBD_DATALEN	((KEYBD_KEY_MAX + 7) / 8)	/* normal key scan data */
+#define KEYBD_KEY_MAX		20				/* maximum key number */
+#define KEYBD_DATALEN		((KEYBD_KEY_MAX + 7) / 8)	/* normal key scan data */
+
+static uchar kbd_addr = CFG_I2C_KBD_ADDR;
 
 static uchar *key_match (uchar *);
 
@@ -326,14 +287,14 @@ int misc_init_r (void)
 
 	i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
 
-	i2c_read (CFG_I2C_KEY_ADDR, 0, 0, kbd_data, KEYBD_DATALEN);
+	i2c_read (kbd_addr, 0, 0, kbd_data, KEYBD_DATALEN);
 
 	for (i = 0; i < KEYBD_DATALEN; ++i) {
 		sprintf (keybd_env + i + i, "%02X", kbd_data[i]);
 	}
 	setenv ("keybd", keybd_env);
 
-	str = strdup (key_match (keybd_env));	/* decode keys */
+	str = strdup (key_match (kbd_data));	/* decode keys */
 
 #ifdef CONFIG_PREBOOT	/* automatically configure "preboot" command on key match */
 	setenv ("preboot", str);	/* set or delete definition */
@@ -363,13 +324,16 @@ int misc_init_r (void)
 static uchar kbd_magic_prefix[] = "key_magic";
 static uchar kbd_command_prefix[] = "key_cmd";
 
-static uchar *key_match (uchar * kbd_str)
+static uchar *key_match (uchar * kbd_data)
 {
+	uchar compare[KEYBD_DATALEN];
 	uchar magic[sizeof (kbd_magic_prefix) + 1];
 	uchar cmd_name[sizeof (kbd_command_prefix) + 1];
-	uchar *str, *suffix;
+	uchar key_mask;
+	uchar *str, *nxt, *suffix;
 	uchar *kbd_magic_keys;
 	char *cmd;
+	int i;
 
 	/*
 	 * The following string defines the characters that can pe appended
@@ -379,48 +343,62 @@ static uchar *key_match (uchar * kbd_str)
 	 * "key_magic" is checked (old behaviour); the string "125" causes
 	 * checks for "key_magic1", "key_magic2" and "key_magic5", etc.
 	 */
-	if ((kbd_magic_keys = getenv ("magic_keys")) != NULL) {
-		/* loop over all magic keys;
-		 * use '\0' suffix in case of empty string
-		 */
-		for (suffix = kbd_magic_keys;
-		     *suffix || suffix == kbd_magic_keys;
-		     ++suffix) {
-			sprintf (magic, "%s%c", kbd_magic_prefix, *suffix);
+	if ((kbd_magic_keys = getenv ("magic_keys")) == NULL)
+		kbd_magic_keys = "";
 
+	/* loop over all magic keys;
+	 * use '\0' suffix in case of empty string
+	 */
+	for (suffix=kbd_magic_keys; *suffix || suffix==kbd_magic_keys; ++suffix) {
+		sprintf (magic, "%s%c", kbd_magic_prefix, *suffix);
 #if 0
-			printf ("### Check magic \"%s\"\n", magic);
+		printf ("### Check magic \"%s\"\n", magic);
 #endif
 
-			if ((str = getenv (magic)) != 0) {
+		memcpy(compare, kbd_data, KEYBD_DATALEN);
 
-#if 0
-				printf ("### Compare \"%s\" \"%s\"\n",
-					kbd_str, str);
-#endif
-				if (strcmp (kbd_str, str) == 0) {
-					sprintf (cmd_name, "%s%c",
-						 kbd_command_prefix,
-						 *suffix);
+		for (str = getenv(magic); str != NULL; str = (*nxt) ? nxt+1 : nxt) {
+			uchar c;
+
+			c = (uchar) simple_strtoul (str, (char **) (&nxt), 16);
+
+			if (str == nxt)				/* invalid character */
+				break;
+
+			if (c >= KEYBD_KEY_MAX)			/* bad key number */
+				goto next_magic;
+
+			key_mask = 0x80 >> (c % 8);
 
-					if ((cmd = getenv (cmd_name)) != 0) {
+			if (!(compare[c / 8] & key_mask))	/* key not pressed */
+				goto next_magic;
+
+			compare[c / 8] &= ~key_mask;
+		}
+
+		for (i=0; i<KEYBD_DATALEN; i++)
+			if (compare[i])			/* key(s) not released */
+				goto next_magic;
+
+		sprintf (cmd_name, "%s%c", kbd_command_prefix, *suffix);
+
+		cmd = getenv (cmd_name);
 #if 0
-						printf ("### Set PREBOOT to $(%s): \"%s\"\n",
-							cmd_name, cmd);
+		printf ("### Set PREBOOT to $(%s): \"%s\"\n",
+			cmd_name, cmd ? cmd : "<<NULL>>");
 #endif
-						return (cmd);
-					}
-				}
-			}
-		}
+		*kbd_data = *suffix;
+		return (cmd);
+
+	next_magic:;
 	}
 #if 0
 	printf ("### Delete PREBOOT\n");
 #endif
-	*kbd_str = '\0';
+	*kbd_data = '\0';
 	return (NULL);
 }
-#endif	/* CONFIG_PREBOOT */
+#endif							/* CONFIG_PREBOOT */
 
 /* Read Keyboard status */
 int do_kbd (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
@@ -432,7 +410,7 @@ int do_kbd (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 	i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
 
 	/* Read keys */
-	i2c_read (CFG_I2C_KEY_ADDR, 0, 0, kbd_data, KEYBD_DATALEN);
+	i2c_read (kbd_addr, 0, 0, kbd_data, KEYBD_DATALEN);
 
 	puts ("Keys:");
 	for (i = 0; i < KEYBD_DATALEN; ++i) {

common/Makefile

@@ -28,7 +28,7 @@ LIB	= libcommon.a
 AOBJS	=
 
 COBJS	= main.o altera.o bedbug.o \
-	  cmd_autoscript.o cmd_bedbug.o cmd_boot.o \
+	  cmd_autoscript.o cmd_bedbug.o cmd_bmp.o cmd_boot.o \
 	  cmd_bootm.o cmd_cache.o cmd_console.o cmd_date.o \
 	  cmd_dcr.o cmd_diag.o cmd_doc.o cmd_nand.o cmd_dtt.o \
 	  cmd_eeprom.o cmd_elf.o cmd_fdc.o cmd_fdos.o cmd_flash.o \

common/cmd_bootm.c

@@ -98,6 +98,7 @@ static boot_os_Fcn do_bootm_linux;
 extern boot_os_Fcn do_bootm_linux;
 #endif
 static boot_os_Fcn do_bootm_netbsd;
+static boot_os_Fcn do_bootm_rtems;
 #if (CONFIG_COMMANDS & CFG_CMD_ELF)
 static boot_os_Fcn do_bootm_vxworks;
 static boot_os_Fcn do_bootm_qnxelf;
@@ -321,6 +322,12 @@ int do_bootm (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	    do_bootm_netbsd (cmdtp, flag, argc, argv,
 			     addr, len_ptr, verify);
 	    break;
+	    
+	case IH_OS_RTEMS:
+	    do_bootm_rtems (cmdtp, flag, argc, argv,
+			     addr, len_ptr, verify);
+	    break;
+	     
 #if (CONFIG_COMMANDS & CFG_CMD_ELF)
 	case IH_OS_VXWORKS:
 	    do_bootm_vxworks (cmdtp, flag, argc, argv,
@@ -831,6 +838,7 @@ print_type (image_header_t *hdr)
 	case IH_OS_VXWORKS:	os = "VxWorks";			break;
 	case IH_OS_QNX:		os = "QNX";			break;
 	case IH_OS_U_BOOT:	os = "U-Boot";			break;
+	case IH_OS_RTEMS:	os = "RTEMS";			break;
 	default:		os = "Unknown OS";		break;
 	}
 
@@ -953,6 +961,29 @@ int gunzip(void *dst, int dstlen, unsigned char *src, int *lenp)
 	return (0);
 }
 
+static void
+do_bootm_rtems (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[],
+		ulong addr, ulong *len_ptr, int verify)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+	image_header_t *hdr = &header;
+	void	(*entry_point)(bd_t *);
+
+	entry_point = (void (*)(bd_t *)) hdr->ih_ep;
+
+	printf ("## Transferring control to RTEMS (at address %08lx) ...\n",
+		(ulong)entry_point);
+
+	SHOW_BOOT_PROGRESS (15);
+
+	/*
+	 * RTEMS Parameters:
+	 *   r3: ptr to board info data
+	 */
+
+	(*entry_point ) ( gd->bd );
+}
+
 #if (CONFIG_COMMANDS & CFG_CMD_ELF)
 static void
 do_bootm_vxworks (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[],

common/command.c

@@ -72,6 +72,7 @@
 #include <cmd_vfd.h>		/* load a bitmap to the VFDs on TRAB */
 #include <cmd_log.h>
 #include <cmd_fdos.h>
+#include <cmd_bmp.h>
 
 #ifdef CONFIG_AMIGAONEG3SE
 #include <cmd_menu.h>
@@ -231,6 +232,7 @@ cmd_tbl_t cmd_tbl[] = {
 	CMD_TBL_AUTOSCRIPT
 	CMD_TBL_BASE
 	CMD_TBL_BDINFO
+	CMD_TBL_BMP
 #ifdef CONFIG_AMIGAONEG3SE
 	CMD_TBL_BOOTA
 #endif

common/console.c

@@ -355,7 +355,7 @@ int console_init_f (void)
 	return (0);
 }
 
-#ifdef CFG_CONSOLE_IS_IN_ENV
+#if defined(CFG_CONSOLE_IS_IN_ENV) || defined(CONFIG_SPLASH_SCREEN)
 /* search a device */
 device_t *search_device (int flags, char *name)
 {
@@ -374,7 +374,7 @@ device_t *search_device (int flags, char *name)
 	}
 	return dev;
 }
-#endif /* CFG_CONSOLE_IS_IN_ENV */
+#endif /* CFG_CONSOLE_IS_IN_ENV || CONFIG_SPLASH_SCREEN */
 
 #ifdef CFG_CONSOLE_IS_IN_ENV
 /* Called after the relocation - use desired console functions */
@@ -469,6 +469,11 @@ int console_init_r (void)
 	device_t *inputdev = NULL, *outputdev = NULL;
 	int i, items = ListNumItems (devlist);
 
+#ifdef CONFIG_SPLASH_SCREEN
+	/* suppress all output if splash screen is enabled */
+	outputdev = search_device (DEV_FLAGS_OUTPUT, "nulldev");
+#endif
+
 	/* Scan devices looking for input and output devices */
 	for (i = 1;
 	     (i <= items) && ((inputdev == NULL) || (outputdev == NULL));

common/devices.c

@@ -37,6 +37,11 @@ list_t devlist = 0;
 device_t *stdio_devices[] = { NULL, NULL, NULL };
 char *stdio_names[MAX_FILES] = { "stdin", "stdout", "stderr" };
 
+#if defined(CONFIG_SPLASH_SCREEN) && !defined(CFG_DEVICE_NULLDEV)
+#define	CFG_DEVICE_NULLDEV	1
+#endif
+
+
 #ifdef CFG_DEVICE_NULLDEV
 void nulldev_putc(const char c)
 {

cpu/mpc8xx/lcd.c

@@ -39,12 +39,10 @@
 /************************************************************************/
 /* ** CONFIG STUFF -- should be moved to board config file		*/
 /************************************************************************/
-#ifndef CONFIG_EDT32F10
 #define CONFIG_LCD_LOGO
 #define LCD_INFO		/* Display Logo, (C) and system info	*/
-#endif
 
-#ifdef CONFIG_V37
+#if defined(CONFIG_V37) || defined(CONFIG_EDT32F10)
 #undef CONFIG_LCD_LOGO
 #undef LCD_INFO
 #endif
@@ -53,6 +51,14 @@
 /* #define CFG_INVERT_COLORS */	/* Not needed - adjust vl_dp instead 	*/
 /************************************************************************/
 
+/************************************************************************/
+/* ** BITMAP DISPLAY SUPPORT  -- should probably be moved elsewhere	*/
+/************************************************************************/
+
+#if (CONFIG_COMMANDS & CFG_CMD_BMP)
+#include <bmp_layout.h>
+#endif /* (CONFIG_COMMANDS & CFG_CMD_BMP) */
+
 /************************************************************************/
 /* ** FONT AND LOGO DATA						*/
 /************************************************************************/
@@ -995,6 +1001,102 @@ static void lcd_enable (void)
 
 /*----------------------------------------------------------------------*/
 
+#if (CONFIG_COMMANDS & CFG_CMD_BMP)
+/*
+  Display the BMP file located at address bmp_image.
+  Only uncompressed
+*/
+int lcd_display_bitmap(ulong bmp_image)
+{
+	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+	volatile cpm8xx_t *cp = &(immr->im_cpm);
+	ushort *cmap;
+	ushort i, j;
+	uchar *fb;
+	bmp_image_t *bmp=(bmp_image_t *)bmp_image;
+	uchar *bmap;
+	ushort padded_line;
+	unsigned long width, height;
+	unsigned colors,bpix;
+	unsigned long compression;
+
+	if (!((bmp->header.signature[0]=='B') &&
+	      (bmp->header.signature[1]=='M'))) {
+		printf ("Error: no valid bmp image at %lx\n", bmp_image);
+		return 1;
+	}
+
+	width = le32_to_cpu (bmp->header.width);
+	height = le32_to_cpu (bmp->header.height);
+	colors = 1<<le16_to_cpu (bmp->header.bit_count);
+	compression = le32_to_cpu (bmp->header.compression);
+
+	bpix = NBITS(panel_info.vl_bpix);
+
+	if ((bpix != 1) && (bpix != 8)) {
+		printf ("Error: %d bit/pixel mode not supported by U-Boot\n",
+			bpix);
+		return 1;
+	}
+
+	if (bpix != le16_to_cpu(bmp->header.bit_count)) {
+		printf ("Error: %d bit/pixel mode, but BMP has %d bit/pixel\n",
+			bpix,
+			le16_to_cpu(bmp->header.bit_count));
+		return 1;
+	}
+
+	if (compression!=BMP_BI_RGB) {
+		printf ("Error: compression type %ld not supported\n",
+			compression);
+		return 1;
+	}
+
+	debug ("Display-bmp: %d x %d  with %d colors\n",
+	       width, height, colors);
+
+	if (bpix==8) {
+		/* Fill the entire color map */
+		cmap = (ushort *)&(cp->lcd_cmap[255*sizeof(ushort)]);
+
+		/* Set color map */
+		for (i = 0; i < colors; ++i) {
+			bmp_color_table_entry_t cte = bmp->color_table[i];
+			ushort colreg =
+				((cte.red>>4)   << 8) |
+				((cte.green>>4) << 4) |
+				(cte.blue>>4) ;
+#ifdef	CFG_INVERT_COLORS
+			colreg ^= 0xFFF;
+#endif
+			*cmap-- = colreg;
+		}
+	}
+
+	padded_line = (width&0x3) ? ((width&~0x3)+4) : (width);
+	if (width>panel_info.vl_col)
+		width = panel_info.vl_col;
+	if (height>panel_info.vl_row)
+		height = panel_info.vl_row;
+
+	bmap = (uchar *)bmp + le32_to_cpu (bmp->header.data_offset);
+	fb   = (uchar *)
+		(lcd_base +
+		 (((height>=panel_info.vl_row) ? panel_info.vl_row : height)-1)
+		 * lcd_line_length);
+	for (i = 0; i < height; ++i) {
+		for (j = 0; j < width ; j++)
+			*(fb++)=255-*(bmap++);
+		bmap += (width - padded_line);
+		fb   -= (width + lcd_line_length);
+	}
+
+	return (0);
+}
+#endif /* (CONFIG_COMMANDS & CFG_CMD_BMP) */
+
+/*----------------------------------------------------------------------*/
+
 #ifdef	NOT_USED_SO_FAR
 static void lcd_disable (void)
 {
@@ -1066,6 +1168,100 @@ static void bitmap_plot (int x, int y)
 }
 #endif /* CONFIG_LCD_LOGO */
 
+#if (CONFIG_COMMANDS & CFG_CMD_BMP)
+/*
+  Display the BMP file located at address bmp_image.
+  Only uncompressed
+*/
+int lcd_display_bitmap(ulong bmp_image)
+{
+	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+	volatile cpm8xx_t *cp = &(immr->im_cpm);
+	ushort *cmap;
+	ushort i, j;
+	uchar *fb;
+	bmp_image_t *bmp=(bmp_image_t *)bmp_image;
+	uchar *bmap;
+	ushort padded_line;
+	unsigned long width, height;
+	unsigned colors,bpix;
+	unsigned long compression;
+
+	if (!((bmp->header.signature[0]=='B') &&
+	      (bmp->header.signature[1]=='M'))) {
+		printf ("Error: no valid bmp image at %lx\n", bmp_image);
+		return 1;
+	}
+
+	width = le32_to_cpu (bmp->header.width);
+	height = le32_to_cpu (bmp->header.height);
+	colors = 1<<le16_to_cpu (bmp->header.bit_count);
+	compression = le32_to_cpu (bmp->header.compression);
+
+	bpix = NBITS(panel_info.vl_bpix);
+
+	if ((bpix != 1) && (bpix != 8)) {
+		printf ("Error: %d bit/pixel mode not supported by U-Boot\n",
+			bpix);
+		return 1;
+	}
+
+	if (bpix != le16_to_cpu(bmp->header.bit_count)) {
+		printf ("Error: %d bit/pixel mode, but BMP has %d bit/pixel\n",
+			bpix,
+			le16_to_cpu(bmp->header.bit_count));
+		return 1;
+	}
+
+	if (compression!=BMP_BI_RGB) {
+		printf ("Error: compression type %ld not supported\n",
+			compression);
+		return 1;
+	}
+
+	debug ("Display-bmp: %d x %d  with %d colors\n",
+	       width, height, colors);
+
+	if (bpix==8) {
+		/* Fill the entire color map */
+		cmap = (ushort *)&(cp->lcd_cmap[255*sizeof(ushort)]);
+
+		/* Set color map */
+		for (i = 0; i < colors; ++i) {
+			bmp_color_table_entry_t cte = bmp->color_table[i];
+			ushort colreg =
+				((cte.red>>4)   << 8) |
+				((cte.green>>4) << 4) |
+				(cte.blue>>4) ;
+#ifdef	CFG_INVERT_COLORS
+			colreg ^= 0xFFF;
+#endif
+			*cmap-- = colreg;
+		}
+	}
+
+	padded_line = (width&0x3) ? ((width&~0x3)+4) : (width);
+	if (width>panel_info.vl_col)
+		width = panel_info.vl_col;
+	if (height>panel_info.vl_row)
+		height = panel_info.vl_row;
+
+	bmap = (uchar *)bmp + le32_to_cpu (bmp->header.data_offset);
+	fb   = (uchar *)
+		(lcd_base +
+		 (((height>=panel_info.vl_row) ? panel_info.vl_row : height)-1)
+		 * lcd_line_length);
+	for (i = 0; i < height; ++i) {
+		for (j = 0; j < width ; j++)
+			*(fb++)=255-*(bmap++);
+		bmap += (width - padded_line);
+		fb   -= (width + lcd_line_length);
+	}
+
+	return (0);
+}
+#endif /* (CONFIG_COMMANDS & CFG_CMD_BMP) */
+
 /*----------------------------------------------------------------------*/
 
 static void *lcd_logo (void)
@@ -1077,6 +1273,19 @@ static void *lcd_logo (void)
 	char temp[32];
 #endif /* LCD_INFO */
 
+#ifdef CONFIG_SPLASH_SCREEN
+	char *s;
+	ulong addr;
+
+	if ((s = getenv("splashimage")) != NULL) {
+		addr = simple_strtoul(s, NULL, 16);
+
+		if (lcd_display_bitmap (addr) == 0) {
+			return ((void *)lcd_base);
+		}
+	}
+#endif	/* CONFIG_SPLASH_SCREEN */
+
 #ifdef CONFIG_LCD_LOGO
 	bitmap_plot (0, 0);
 #endif /* CONFIG_LCD_LOGO */
@@ -1086,7 +1295,7 @@ static void *lcd_logo (void)
 	sprintf (info, "%s (%s - %s) ", U_BOOT_VERSION, __DATE__, __TIME__);
 	lcd_drawchars (LCD_INFO_X, LCD_INFO_Y, info, strlen(info));
 
-	sprintf (info, "(C) 2002 DENX Software Engineering");
+	sprintf (info, "(C) 2003 DENX Software Engineering");
 	lcd_drawchars (LCD_INFO_X, LCD_INFO_Y + VIDEO_FONT_HEIGHT,
 					info, strlen(info));
 

doc/README.commands

@@ -15,6 +15,7 @@ as		2
 autoscr		5
 base		2
 bdinfo		2
+bmp		3
 bootelf		7
 bootm		5
 bootp		5

include/cmd_confdefs.h

@@ -79,6 +79,7 @@
 #define CFG_CMD_FDOS	0x0000200000000000	/* Floppy DOS support		*/
 #define CFG_CMD_VFD	0x0000400000000000	/* VFD support (TRAB)		*/
 #define CFG_CMD_NAND	0x0000800000000000	/* NAND support        		*/
+#define CFG_CMD_BMP	0x0001000000000000	/* BMP support			*/
 
 #define CFG_CMD_ALL	0xFFFFFFFFFFFFFFFF	/* ALL commands			*/
 
@@ -87,6 +88,7 @@
  */
 #define CFG_CMD_NONSTD (CFG_CMD_ASKENV	| \
 			CFG_CMD_BEDBUG	| \
+			CFG_CMD_BMP	| \
 			CFG_CMD_BSP	| \
 			CFG_CMD_CACHE	| \
 			CFG_CMD_DATE	| \

include/commproc.h

@@ -1365,7 +1365,7 @@ typedef struct scc_enet {
 /***  TQM855L, TQM860L, TQM862L  **************************************/
 
 #if defined(CONFIG_TQM855L) || \
-    defined(CONFIG_TQM860L)
+    defined(CONFIG_TQM860L) || \
     defined(CONFIG_TQM862L)
 
 # ifdef CONFIG_SCC1_ENET	/* use SCC for 10Mbps Ethernet	*/

include/configs/R360MPI.h

@@ -40,6 +40,8 @@
 #undef  CONFIG_EDT32F10
 #define CONFIG_SHARP_LQ057Q3DC02
 
+#define	CONFIG_SPLASH_SCREEN
+
 #define MPC8XX_FACT             1		/* Multiply by 1	*/
 #define MPC8XX_XIN              50000000	/* 50 MHz in		*/
 #define CONFIG_8xx_GCLK_FREQ    50000000 /* define if can't use get_gclk_freq */
@@ -118,6 +120,7 @@
 #define CFG_I2C_TEM_ADDR	0x49	/* Temperature Sensors */
 
 #define CONFIG_COMMANDS	      ( CONFIG_CMD_DFL	| \
+				CFG_CMD_BMP	| \
 				CFG_CMD_DHCP	| \
 				CFG_CMD_DATE	| \
 				CFG_CMD_I2C	| \

include/configs/incaip.h

@@ -31,8 +31,8 @@
 #define CONFIG_MIPS32		1	/* MIPS 4Kc CPU core	*/
 #define CONFIG_INCA_IP		1	/* on a INCA-IP Board	*/
 
-/* allowed values: 100000000 and 150000000 */
-#define CPU_CLOCK_RATE	150000000   /* 150 MHz clock for the MIPS core */
+/* allowed values: 100000000, 133000000, and 150000000 */
+#define CPU_CLOCK_RATE	133000000   /* 133 MHz clock for the MIPS core */
 
 #if CPU_CLOCK_RATE == 100000000
 #define INFINEON_EBU_BOOTCFG	0x20C4	/* CMULT = 4 for 100 MHz */

include/configs/lwmon.h

@@ -153,6 +153,7 @@
 				CFG_CMD_EEPROM	| \
 				CFG_CMD_IDE	| \
 				CFG_CMD_BSP	| \
+				CFG_CMD_BMP	| \
 				CFG_CMD_POST_DIAG )
 #else
 #define CONFIG_COMMANDS	      ( CONFIG_CMD_DFL	| \
@@ -162,6 +163,7 @@
 				CFG_CMD_EEPROM	| \
 				CFG_CMD_IDE	| \
 				CFG_CMD_BSP	| \
+				CFG_CMD_BMP	| \
 				CFG_CMD_POST_DIAG )
 #endif
 #define CONFIG_MAC_PARTITION

include/image.h

@@ -45,6 +45,7 @@
 #define IH_OS_PSOS		15	/* pSOS		*/
 #define IH_OS_QNX		16	/* QNX		*/
 #define IH_OS_U_BOOT		17	/* Firmware	*/
+#define IH_OS_RTEMS		18	/* RTEMS	*/
 
 /*
  * CPU Architecture Codes (supported by Linux)

tools/env/fw_env.h

@@ -27,7 +27,7 @@
  * See included "fw_env.config" sample file (TRAB board)
  * for notes on configuration.
  */
-/*#define CONFIG_FILE     "/etc/fw_env.config" */
+#define CONFIG_FILE     "/etc/fw_env.config"
 
 #define HAVE_REDUND /* For systems with 2 env sectors */
 #define DEVICE1_NAME      "/dev/mtd1"

tools/mkimage.c

@@ -92,6 +92,7 @@ table_entry_t os_name[] = {
     {	IH_OS_PSOS,	"psos",		"pSOS",			},
     {	IH_OS_QNX,	"qnx",		"QNX",			},
     {	IH_OS_U_BOOT,	"u-boot",	"U-Boot",		},
+    {	IH_OS_RTEMS,	"rtems",	"RTEMS",		},
     {	-1,		"",		"",			},
 };