Merge remote-tracking branch 'u-boot-imx/master'

Makefile

@@ -306,11 +306,8 @@ ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP34XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX),)
 LIBS-y += $(CPUDIR)/omap-common/libomap-common.o
 endif
 
-ifeq ($(SOC),mx5)
-LIBS-y += $(CPUDIR)/imx-common/libimx-common.o
-endif
-ifeq ($(SOC),mx6)
-LIBS-y += $(CPUDIR)/imx-common/libimx-common.o
+ifneq (,$(filter $(SOC), mx25 mx27 mx5 mx6 mx31 mx35))
+LIBS-y += arch/$(ARCH)/imx-common/libimx-common.o
 endif
 
 ifeq ($(SOC),s5pc1xx)
@@ -776,6 +773,7 @@ clean:
 	       $(obj)tools/gen_eth_addr    $(obj)tools/img2srec		  \
 	       $(obj)tools/mk{env,}image   $(obj)tools/mpc86x_clk	  \
 	       $(obj)tools/mk{smdk5250,}spl				  \
+	       $(obj)tools/mxsboot					  \
 	       $(obj)tools/ncb		   $(obj)tools/ubsha1
 	@rm -f $(obj)board/cray/L1/{bootscript.c,bootscript.image}	  \
 	       $(obj)board/matrix_vision/*/bootscript.img		  \

arch/arm/cpu/arm1136/mx31/generic.c

@@ -22,6 +22,7 @@
  */
 
 #include <common.h>
+#include <div64.h>
 #include <asm/arch/imx-regs.h>
 #include <asm/arch/clock.h>
 #include <asm/io.h>
@@ -30,16 +31,17 @@
 static u32 mx31_decode_pll(u32 reg, u32 infreq)
 {
 	u32 mfi = GET_PLL_MFI(reg);
-	u32 mfn = GET_PLL_MFN(reg);
+	s32 mfn = GET_PLL_MFN(reg);
 	u32 mfd = GET_PLL_MFD(reg);
 	u32 pd =  GET_PLL_PD(reg);
 
 	mfi = mfi <= 5 ? 5 : mfi;
+	mfn = mfn >= 512 ? mfn - 1024 : mfn;
 	mfd += 1;
 	pd += 1;
 
-	return ((2 * (infreq >> 10) * (mfi * mfd + mfn)) /
-		(mfd * pd)) << 10;
+	return lldiv(2 * (u64)infreq * (mfi * mfd + mfn),
+		mfd * pd);
 }
 
 static u32 mx31_get_mpl_dpdgck_clk(void)
@@ -47,9 +49,9 @@ static u32 mx31_get_mpl_dpdgck_clk(void)
 	u32 infreq;
 
 	if ((readl(CCM_CCMR) & CCMR_PRCS_MASK) == CCMR_FPM)
-		infreq = CONFIG_MX31_CLK32 * 1024;
+		infreq = MXC_CLK32 * 1024;
 	else
-		infreq = CONFIG_MX31_HCLK_FREQ;
+		infreq = MXC_HCLK;
 
 	return mx31_decode_pll(readl(CCM_MPCTL), infreq);
 }

arch/arm/cpu/arm1136/mx31/timer.c

@@ -23,6 +23,7 @@
 
 #include <common.h>
 #include <asm/arch/imx-regs.h>
+#include <asm/arch/clock.h>
 #include <div64.h>
 #include <watchdog.h>
 #include <asm/io.h>
@@ -53,28 +54,27 @@ DECLARE_GLOBAL_DATA_PTR;
 static inline unsigned long long tick_to_time(unsigned long long tick)
 {
 	tick *= CONFIG_SYS_HZ;
-	do_div(tick, CONFIG_MX31_CLK32);
+	do_div(tick, MXC_CLK32);
 	return tick;
 }
 
 static inline unsigned long long time_to_tick(unsigned long long time)
 {
-	time *= CONFIG_MX31_CLK32;
+	time *= MXC_CLK32;
 	do_div(time, CONFIG_SYS_HZ);
 	return time;
 }
 
 static inline unsigned long long us_to_tick(unsigned long long us)
 {
-	us = us * CONFIG_MX31_CLK32 + 999999;
+	us = us * MXC_CLK32 + 999999;
 	do_div(us, 1000000);
 	return us;
 }
 #else
 /* ~2% error */
-#define TICK_PER_TIME	((CONFIG_MX31_CLK32 + CONFIG_SYS_HZ / 2) \
-							/ CONFIG_SYS_HZ)
-#define US_PER_TICK	(1000000 / CONFIG_MX31_CLK32)
+#define TICK_PER_TIME	((MXC_CLK32 + CONFIG_SYS_HZ / 2) / CONFIG_SYS_HZ)
+#define US_PER_TICK	(1000000 / MXC_CLK32)
 
 static inline unsigned long long tick_to_time(unsigned long long tick)
 {
@@ -128,7 +128,7 @@ ulong get_timer_masked(void)
 {
 	/*
 	 * get_ticks() returns a long long (64 bit), it wraps in
-	 * 2^64 / CONFIG_MX31_CLK32 = 2^64 / 2^15 = 2^49 ~ 5 * 10^14 (s) ~
+	 * 2^64 / MXC_CLK32 = 2^64 / 2^15 = 2^49 ~ 5 * 10^14 (s) ~
 	 * 5 * 10^9 days... and get_ticks() * CONFIG_SYS_HZ wraps in
 	 * 5 * 10^6 days - long enough.
 	 */
@@ -159,7 +159,7 @@ void __udelay(unsigned long usec)
  */
 ulong get_tbclk(void)
 {
-	return CONFIG_MX31_CLK32;
+	return MXC_CLK32;
 }
 
 void reset_cpu(ulong addr)

arch/arm/cpu/arm1136/mx35/generic.c

@@ -24,6 +24,7 @@
  */
 
 #include <common.h>
+#include <div64.h>
 #include <asm/io.h>
 #include <asm/errno.h>
 #include <asm/arch/imx-regs.h>
@@ -129,15 +130,17 @@ static int get_ahb_div(u32 pdr0)
 static u32 decode_pll(u32 reg, u32 infreq)
 {
 	u32 mfi = (reg >> 10) & 0xf;
-	u32 mfn = reg & 0x3f;
-	u32 mfd = (reg >> 16) & 0x3f;
+	s32 mfn = reg & 0x3ff;
+	u32 mfd = (reg >> 16) & 0x3ff;
 	u32 pd = (reg >> 26) & 0xf;
 
 	mfi = mfi <= 5 ? 5 : mfi;
+	mfn = mfn >= 512 ? mfn - 1024 : mfn;
 	mfd += 1;
 	pd += 1;
 
-	return ((2 * (infreq / 1000) * (mfi * mfd + mfn)) / (mfd * pd)) * 1000;
+	return lldiv(2 * (u64)infreq * (mfi * mfd + mfn),
+		mfd * pd);
 }
 
 static u32 get_mcu_main_clk(void)
@@ -146,9 +149,7 @@ static u32 get_mcu_main_clk(void)
 	struct ccm_regs *ccm =
 		(struct ccm_regs *)IMX_CCM_BASE;
 	arm_div = get_arm_div(readl(&ccm->pdr0), &fi, &fd);
-	fi *=
-		decode_pll(readl(&ccm->mpctl),
-			CONFIG_MX35_HCLK_FREQ);
+	fi *= decode_pll(readl(&ccm->mpctl), MXC_HCLK);
 	return fi / (arm_div * fd);
 }
 
@@ -171,17 +172,14 @@ static u32 get_ipg_per_clk(void)
 	u32 pdr4 = readl(&ccm->pdr4);
 	u32 div;
 	if (pdr0 & MXC_CCM_PDR0_PER_SEL) {
-		div = (CCM_GET_DIVIDER(pdr4,
-			MXC_CCM_PDR4_PER0_PRDF_MASK,
-			MXC_CCM_PDR4_PER0_PODF_OFFSET) + 1) *
-			(CCM_GET_DIVIDER(pdr4,
+		div = CCM_GET_DIVIDER(pdr4,
 			MXC_CCM_PDR4_PER0_PODF_MASK,
-			MXC_CCM_PDR4_PER0_PODF_OFFSET) + 1);
+			MXC_CCM_PDR4_PER0_PODF_OFFSET) + 1;
 	} else {
 		div = CCM_GET_DIVIDER(pdr0,
 			MXC_CCM_PDR0_PER_PODF_MASK,
 			MXC_CCM_PDR0_PER_PODF_OFFSET) + 1;
-		freq /= get_ahb_div(pdr0);
+		div *= get_ahb_div(pdr0);
 	}
 	return freq / div;
 }
@@ -193,25 +191,20 @@ u32 imx_get_uartclk(void)
 		(struct ccm_regs *)IMX_CCM_BASE;
 	u32 pdr4 = readl(&ccm->pdr4);
 
-	if (readl(&ccm->pdr3) & MXC_CCM_PDR3_UART_M_U) {
+	if (readl(&ccm->pdr3) & MXC_CCM_PDR3_UART_M_U)
 		freq = get_mcu_main_clk();
-	} else {
-		freq = decode_pll(readl(&ccm->ppctl),
-			CONFIG_MX35_HCLK_FREQ);
-	}
-	freq /= ((CCM_GET_DIVIDER(pdr4,
-			MXC_CCM_PDR4_UART_PRDF_MASK,
-			MXC_CCM_PDR4_UART_PRDF_OFFSET) + 1) *
-		(CCM_GET_DIVIDER(pdr4,
+	else
+		freq = decode_pll(readl(&ccm->ppctl), MXC_HCLK);
+	freq /= CCM_GET_DIVIDER(pdr4,
 			MXC_CCM_PDR4_UART_PODF_MASK,
-			MXC_CCM_PDR4_UART_PODF_OFFSET) + 1));
+			MXC_CCM_PDR4_UART_PODF_OFFSET) + 1;
 	return freq;
 }
 
 unsigned int mxc_get_main_clock(enum mxc_main_clock clk)
 {
 	u32 nfc_pdf, hsp_podf;
-	u32 pll, ret_val = 0, usb_prdf, usb_podf;
+	u32 pll, ret_val = 0, usb_podf;
 	struct ccm_regs *ccm =
 		(struct ccm_regs *)IMX_CCM_BASE;
 
@@ -255,16 +248,13 @@ unsigned int mxc_get_main_clock(enum mxc_main_clock clk)
 		ret_val = pll / (nfc_pdf + 1);
 		break;
 	case USB_CLK:
-		usb_prdf = (reg4 >> 25) & 0x7;
-		usb_podf = (reg4 >> 22) & 0x7;
-		if (reg4 & 0x200) {
+		usb_podf = (reg4 >> 22) & 0x3F;
+		if (reg4 & 0x200)
 			pll = get_mcu_main_clk();
-		} else {
-			pll = decode_pll(readl(&ccm->ppctl),
-				CONFIG_MX35_HCLK_FREQ);
-		}
+		else
+			pll = decode_pll(readl(&ccm->ppctl), MXC_HCLK);
 
-		ret_val = pll / ((usb_prdf + 1) * (usb_podf + 1));
+		ret_val = pll / (usb_podf + 1);
 		break;
 	default:
 		printf("Unknown clock: %d\n", clk);
@@ -287,18 +277,16 @@ unsigned int mxc_get_peri_clock(enum mxc_peri_clock clk)
 	case UART2_BAUD:
 	case UART3_BAUD:
 		clk_sel = mpdr3 & (1 << 14);
-		pre_pdf = (mpdr4 >> 13) & 0x7;
-		pdf = (mpdr4 >> 10) & 0x7;
+		pdf = (mpdr4 >> 10) & 0x3F;
 		ret_val = ((clk_sel != 0) ? mxc_get_main_clock(CPU_CLK) :
-			decode_pll(readl(&ccm->ppctl), CONFIG_MX35_HCLK_FREQ)) /
-				((pre_pdf + 1) * (pdf + 1));
+			decode_pll(readl(&ccm->ppctl), MXC_HCLK)) / (pdf + 1);
 		break;
 	case SSI1_BAUD:
 		pre_pdf = (mpdr2 >> 24) & 0x7;
 		pdf = mpdr2 & 0x3F;
 		clk_sel = mpdr2 & (1 << 6);
 		ret_val = ((clk_sel != 0) ? mxc_get_main_clock(CPU_CLK) :
-			decode_pll(readl(&ccm->ppctl), CONFIG_MX35_HCLK_FREQ)) /
+			decode_pll(readl(&ccm->ppctl), MXC_HCLK)) /
 				((pre_pdf + 1) * (pdf + 1));
 		break;
 	case SSI2_BAUD:
@@ -306,16 +294,14 @@ unsigned int mxc_get_peri_clock(enum mxc_peri_clock clk)
 		pdf = (mpdr2 >> 8) & 0x3F;
 		clk_sel = mpdr2 & (1 << 6);
 		ret_val = ((clk_sel != 0) ? mxc_get_main_clock(CPU_CLK) :
-			decode_pll(readl(&ccm->ppctl), CONFIG_MX35_HCLK_FREQ)) /
+			decode_pll(readl(&ccm->ppctl), MXC_HCLK)) /
 				((pre_pdf + 1) * (pdf + 1));
 		break;
 	case CSI_BAUD:
 		clk_sel = mpdr2 & (1 << 7);
-		pre_pdf = (mpdr2 >> 16) & 0x7;
-		pdf = (mpdr2 >> 19) & 0x7;
+		pdf = (mpdr2 >> 16) & 0x3F;
 		ret_val = ((clk_sel != 0) ? mxc_get_main_clock(CPU_CLK) :
-			decode_pll(readl(&ccm->ppctl), CONFIG_MX35_HCLK_FREQ)) /
-				((pre_pdf + 1) * (pdf + 1));
+			decode_pll(readl(&ccm->ppctl), MXC_HCLK)) / (pdf + 1);
 		break;
 	case MSHC_CLK:
 		pre_pdf = readl(&ccm->pdr1);
@@ -323,39 +309,33 @@ unsigned int mxc_get_peri_clock(enum mxc_peri_clock clk)
 		pdf = (pre_pdf >> 22) & 0x3F;
 		pre_pdf = (pre_pdf >> 28) & 0x7;
 		ret_val = ((clk_sel != 0) ? mxc_get_main_clock(CPU_CLK) :
-			decode_pll(readl(&ccm->ppctl), CONFIG_MX35_HCLK_FREQ)) /
+			decode_pll(readl(&ccm->ppctl), MXC_HCLK)) /
 				((pre_pdf + 1) * (pdf + 1));
 		break;
 	case ESDHC1_CLK:
 		clk_sel = mpdr3 & 0x40;
-		pre_pdf = mpdr3 & 0x7;
-		pdf = (mpdr3>>3) & 0x7;
+		pdf = mpdr3 & 0x3F;
 		ret_val = ((clk_sel != 0) ? mxc_get_main_clock(CPU_CLK) :
-			decode_pll(readl(&ccm->ppctl), CONFIG_MX35_HCLK_FREQ)) /
-				((pre_pdf + 1) * (pdf + 1));
+			decode_pll(readl(&ccm->ppctl), MXC_HCLK)) / (pdf + 1);
 		break;
 	case ESDHC2_CLK:
 		clk_sel = mpdr3 & 0x40;
-		pre_pdf = (mpdr3 >> 8) & 0x7;
-		pdf = (mpdr3 >> 11) & 0x7;
+		pdf = (mpdr3 >> 8) & 0x3F;
 		ret_val = ((clk_sel != 0) ? mxc_get_main_clock(CPU_CLK) :
-			decode_pll(readl(&ccm->ppctl), CONFIG_MX35_HCLK_FREQ)) /
-				((pre_pdf + 1) * (pdf + 1));
+			decode_pll(readl(&ccm->ppctl), MXC_HCLK)) / (pdf + 1);
 		break;
 	case ESDHC3_CLK:
 		clk_sel = mpdr3 & 0x40;
-		pre_pdf = (mpdr3 >> 16) & 0x7;
-		pdf = (mpdr3 >> 19) & 0x7;
+		pdf = (mpdr3 >> 16) & 0x3F;
 		ret_val = ((clk_sel != 0) ? mxc_get_main_clock(CPU_CLK) :
-			decode_pll(readl(&ccm->ppctl), CONFIG_MX35_HCLK_FREQ)) /
-				((pre_pdf + 1) * (pdf + 1));
+			decode_pll(readl(&ccm->ppctl), MXC_HCLK)) / (pdf + 1);
 		break;
 	case SPDIF_CLK:
 		clk_sel = mpdr3 & 0x400000;
 		pre_pdf = (mpdr3 >> 29) & 0x7;
 		pdf = (mpdr3 >> 23) & 0x3F;
 		ret_val = ((clk_sel != 0) ? mxc_get_main_clock(CPU_CLK) :
-			decode_pll(readl(&ccm->ppctl), CONFIG_MX35_HCLK_FREQ)) /
+			decode_pll(readl(&ccm->ppctl), MXC_HCLK)) /
 				((pre_pdf + 1) * (pdf + 1));
 		break;
 	default:

arch/arm/cpu/arm1136/mx35/timer.c

@@ -27,6 +27,7 @@
 #include <asm/io.h>
 #include <div64.h>
 #include <asm/arch/imx-regs.h>
+#include <asm/arch/crm_regs.h>
 #include <asm/arch/clock.h>
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -37,43 +38,52 @@ DECLARE_GLOBAL_DATA_PTR;
 /* General purpose timers bitfields */
 #define GPTCR_SWR       (1<<15)	/* Software reset */
 #define GPTCR_FRR       (1<<9)	/* Freerun / restart */
-#define GPTCR_CLKSOURCE_32   (0x100<<6)	/* Clock source */
-#define GPTCR_CLKSOURCE_IPG (0x001<<6)	/* Clock source */
+#define GPTCR_CLKSOURCE_32   (4<<6)	/* Clock source */
 #define GPTCR_TEN       (1)	/* Timer enable */
 
-#define	TIMER_FREQ_HZ	mxc_get_clock(MXC_IPG_CLK)
-
+/*
+ * "time" is measured in 1 / CONFIG_SYS_HZ seconds,
+ * "tick" is internal timer period
+ */
+/* ~0.4% error - measured with stop-watch on 100s boot-delay */
 static inline unsigned long long tick_to_time(unsigned long long tick)
 {
 	tick *= CONFIG_SYS_HZ;
-	do_div(tick, TIMER_FREQ_HZ);
+	do_div(tick, MXC_CLK32);
 
 	return tick;
 }
 
-static inline unsigned long long us_to_tick(unsigned long long usec)
+static inline unsigned long long us_to_tick(unsigned long long us)
 {
-	usec *= TIMER_FREQ_HZ;
-	do_div(usec, 1000000);
+	us = us * MXC_CLK32 + 999999;
+	do_div(us, 1000000);
 
-	return usec;
+	return us;
 }
 
+/*
+ * nothing really to do with interrupts, just starts up a counter.
+ * The 32KHz 32-bit timer overruns in 134217 seconds
+ */
 int timer_init(void)
 {
 	int i;
 	struct gpt_regs *gpt = (struct gpt_regs *)GPT1_BASE_ADDR;
+	struct ccm_regs *ccm = (struct ccm_regs *)CCM_BASE_ADDR;
 
 	/* setup GP Timer 1 */
 	writel(GPTCR_SWR, &gpt->ctrl);
-	for (i = 0; i < 100; i++)
-		writel(0, &gpt->ctrl);	/* We have no udelay by now */
 
-	writel(0, &gpt->pre);
-	/* Freerun Mode, PERCLK1 input */
-	writel(readl(&gpt->ctrl) |
-		GPTCR_CLKSOURCE_IPG | GPTCR_TEN,
-		&gpt->ctrl);
+	writel(readl(&ccm->cgr1) | 3 << MXC_CCM_CGR1_GPT_OFFSET, &ccm->cgr1);
+
+	for (i = 0; i < 100; i++)
+		writel(0, &gpt->ctrl); /* We have no udelay by now */
+	writel(0, &gpt->pre); /* prescaler = 1 */
+	/* Freerun Mode, 32KHz input */
+	writel(readl(&gpt->ctrl) | GPTCR_CLKSOURCE_32 | GPTCR_FRR,
+			&gpt->ctrl);
+	writel(readl(&gpt->ctrl) | GPTCR_TEN, &gpt->ctrl);
 
 	return 0;
 }
@@ -101,7 +111,7 @@ ulong get_timer_masked(void)
 {
 	/*
 	 * get_ticks() returns a long long (64 bit), it wraps in
-	 * 2^64 / CONFIG_MX25_CLK32 = 2^64 / 2^15 = 2^49 ~ 5 * 10^14 (s) ~
+	 * 2^64 / MXC_CLK32 = 2^64 / 2^15 = 2^49 ~ 5 * 10^14 (s) ~
 	 * 5 * 10^9 days... and get_ticks() * CONFIG_SYS_HZ wraps in
 	 * 5 * 10^6 days - long enough.
 	 */
@@ -132,5 +142,5 @@ void __udelay(unsigned long usec)
  */
 ulong get_tbclk(void)
 {
-	return TIMER_FREQ_HZ;
+	return MXC_CLK32;
 }

arch/arm/cpu/arm926ejs/mx25/generic.c

@@ -64,7 +64,7 @@ static unsigned int imx_decode_pll(unsigned int pll, unsigned int f_ref)
 static ulong imx_get_mpllclk(void)
 {
 	struct ccm_regs *ccm = (struct ccm_regs *)IMX_CCM_BASE;
-	ulong fref = 24000000;
+	ulong fref = MXC_HCLK;
 
 	return imx_decode_pll(readl(&ccm->mpctl), fref);
 }

arch/arm/cpu/arm926ejs/mx25/timer.c

@@ -40,6 +40,7 @@
 #include <div64.h>
 #include <asm/io.h>
 #include <asm/arch/imx-regs.h>
+#include <asm/arch/clock.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -55,28 +56,27 @@ DECLARE_GLOBAL_DATA_PTR;
 static inline unsigned long long tick_to_time(unsigned long long tick)
 {
 	tick *= CONFIG_SYS_HZ;
-	do_div(tick, CONFIG_MX25_CLK32);
+	do_div(tick, MXC_CLK32);
 	return tick;
 }
 
 static inline unsigned long long time_to_tick(unsigned long long time)
 {
-	time *= CONFIG_MX25_CLK32;
+	time *= MXC_CLK32;
 	do_div(time, CONFIG_SYS_HZ);
 	return time;
 }
 
 static inline unsigned long long us_to_tick(unsigned long long us)
 {
-	us = us * CONFIG_MX25_CLK32 + 999999;
+	us = us * MXC_CLK32 + 999999;
 	do_div(us, 1000000);
 	return us;
 }
 #else
 /* ~2% error */
-#define TICK_PER_TIME	((CONFIG_MX25_CLK32 + CONFIG_SYS_HZ / 2) / \
-		CONFIG_SYS_HZ)
-#define US_PER_TICK	(1000000 / CONFIG_MX25_CLK32)
+#define TICK_PER_TIME	((MXC_CLK32 + CONFIG_SYS_HZ / 2) / CONFIG_SYS_HZ)
+#define US_PER_TICK	(1000000 / MXC_CLK32)
 
 static inline unsigned long long tick_to_time(unsigned long long tick)
 {
@@ -144,7 +144,7 @@ ulong get_timer_masked(void)
 {
 	/*
 	 * get_ticks() returns a long long (64 bit), it wraps in
-	 * 2^64 / CONFIG_MX25_CLK32 = 2^64 / 2^15 = 2^49 ~ 5 * 10^14 (s) ~
+	 * 2^64 / MXC_CLK32 = 2^64 / 2^15 = 2^49 ~ 5 * 10^14 (s) ~
 	 * 5 * 10^9 days... and get_ticks() * CONFIG_SYS_HZ wraps in
 	 * 5 * 10^6 days - long enough.
 	 */
@@ -177,6 +177,6 @@ ulong get_tbclk(void)
 {
 	ulong tbclk;
 
-	tbclk = CONFIG_MX25_CLK32;
+	tbclk = MXC_CLK32;
 	return tbclk;
 }

arch/arm/cpu/arm926ejs/mxs/spl_boot.c

@@ -38,12 +38,14 @@
  * takes a few seconds to roll. The boot doesn't take that long, so to keep the
  * code simple, it doesn't take rolling into consideration.
  */
-#define	HW_DIGCTRL_MICROSECONDS	0x8001c0c0
 void early_delay(int delay)
 {
-	uint32_t st = readl(HW_DIGCTRL_MICROSECONDS);
+	struct mxs_digctl_regs *digctl_regs =
+		(struct mxs_digctl_regs *)MXS_DIGCTL_BASE;
+
+	uint32_t st = readl(&digctl_regs->hw_digctl_microseconds);
 	st += delay;
-	while (st > readl(HW_DIGCTRL_MICROSECONDS))
+	while (st > readl(&digctl_regs->hw_digctl_microseconds))
 		;
 }
 

arch/arm/cpu/armv7/imx-common/Makefile → arch/arm/imx-common/Makefile

@@ -27,8 +27,10 @@ include $(TOPDIR)/config.mk
 
 LIB     = $(obj)libimx-common.o
 
+ifeq ($(SOC),$(filter $(SOC),mx5 mx6))
 COBJS-y	= iomux-v3.o timer.o cpu.o speed.o
-COBJS-$(CONFIG_I2C_MXC) += i2c.o
+COBJS-$(CONFIG_I2C_MXC) += i2c-mxv7.o
+endif
 COBJS-$(CONFIG_CMD_BMODE) += cmd_bmode.o
 COBJS	:= $(sort $(COBJS-y))
 

arch/arm/include/asm/arch-mx25/clock.h

@@ -26,6 +26,20 @@
 #ifndef __ASM_ARCH_CLOCK_H
 #define __ASM_ARCH_CLOCK_H
 
+#include <common.h>
+
+#ifdef CONFIG_MX25_HCLK_FREQ
+#define MXC_HCLK	CONFIG_MX25_HCLK_FREQ
+#else
+#define MXC_HCLK	24000000
+#endif
+
+#ifdef CONFIG_MX25_CLK32
+#define MXC_CLK32	CONFIG_MX25_CLK32
+#else
+#define MXC_CLK32	32768
+#endif
+
 enum mxc_clock {
 	MXC_CSI_CLK,
 	MXC_EPIT_CLK,

arch/arm/include/asm/arch-mx31/clock.h

@@ -24,6 +24,20 @@
 #ifndef __ASM_ARCH_CLOCK_H
 #define __ASM_ARCH_CLOCK_H
 
+#include <common.h>
+
+#ifdef CONFIG_MX31_HCLK_FREQ
+#define MXC_HCLK	CONFIG_MX31_HCLK_FREQ
+#else
+#define MXC_HCLK	26000000
+#endif
+
+#ifdef CONFIG_MX31_CLK32
+#define MXC_CLK32	CONFIG_MX31_CLK32
+#else
+#define MXC_CLK32	32768
+#endif
+
 enum mxc_clock {
 	MXC_ARM_CLK,
 	MXC_IPG_CLK,

arch/arm/include/asm/arch-mx35/clock.h

@@ -24,6 +24,20 @@
 #ifndef __ASM_ARCH_CLOCK_H
 #define __ASM_ARCH_CLOCK_H
 
+#include <common.h>
+
+#ifdef CONFIG_MX35_HCLK_FREQ
+#define MXC_HCLK	CONFIG_MX35_HCLK_FREQ
+#else
+#define MXC_HCLK	24000000
+#endif
+
+#ifdef CONFIG_MX35_CLK32
+#define MXC_CLK32	CONFIG_MX35_CLK32
+#else
+#define MXC_CLK32	32768
+#endif
+
 enum mxc_clock {
 	MXC_ARM_CLK,
 	MXC_AHB_CLK,

arch/arm/include/asm/arch-mx35/crm_regs.h

@@ -32,8 +32,8 @@
 #define MXC_CCM_CCMR_VOL_RDY_CNT_MASK          (0xF << 20)
 #define MXC_CCM_CCMR_ROMW_OFFSET               18
 #define MXC_CCM_CCMR_ROMW_MASK                 (0x3 << 18)
-#define MXC_CCM_CCMR_RAMW_OFFSET               21
-#define MXC_CCM_CCMR_RAMW_MASK                 (0x3 << 21)
+#define MXC_CCM_CCMR_RAMW_OFFSET               16
+#define MXC_CCM_CCMR_RAMW_MASK                 (0x3 << 16)
 #define MXC_CCM_CCMR_LPM_OFFSET                 14
 #define MXC_CCM_CCMR_LPM_MASK                   (0x3 << 14)
 #define MXC_CCM_CCMR_UPE                        (1 << 9)
@@ -47,7 +47,7 @@
 #define MXC_CCM_PDR0_CON_MUX_DIV_MASK           (0xF << 16)
 #define MXC_CCM_PDR0_CKIL_SEL			(1 << 15)
 #define MXC_CCM_PDR0_PER_PODF_OFFSET            12
-#define MXC_CCM_PDR0_PER_PODF_MASK              (0xF << 12)
+#define MXC_CCM_PDR0_PER_PODF_MASK              (0x7 << 12)
 #define MXC_CCM_PDR0_AUTO_MUX_DIV_OFFSET        9
 #define MXC_CCM_PDR0_AUTO_MUX_DIV_MASK          (0x7 << 9)
 #define MXC_CCM_PDR0_AUTO_CON	                0x1
@@ -62,10 +62,8 @@
 #define MXC_CCM_PDR2_SSI2_PRDF_MASK             (0x7 << 27)
 #define MXC_CCM_PDR2_SSI1_PRDF_OFFSET           24
 #define MXC_CCM_PDR2_SSI1_PRDF_MASK             (0x7 << 24)
-#define MXC_CCM_PDR2_CSI_PRDF_OFFSET            19
-#define MXC_CCM_PDR2_CSI_PRDF_MASK              (0x7 << 19)
 #define MXC_CCM_PDR2_CSI_PODF_OFFSET            16
-#define MXC_CCM_PDR2_CSI_PODF_MASK              (0x7 << 16)
+#define MXC_CCM_PDR2_CSI_PODF_MASK              (0x3F << 16)
 #define MXC_CCM_PDR2_SSI2_PODF_OFFSET           8
 #define MXC_CCM_PDR2_SSI2_PODF_MASK             (0x3F << 8)
 #define MXC_CCM_PDR2_CSI_M_U			(1 << 7)
@@ -78,35 +76,23 @@
 #define MXC_CCM_PDR3_SPDIF_PODF_OFFSET          23
 #define MXC_CCM_PDR3_SPDIF_PODF_MASK            (0x3F << 23)
 #define MXC_CCM_PDR3_SPDIF_M_U			(1 << 22)
-#define MXC_CCM_PDR3_ESDHC3_PRDF_OFFSET         19
-#define MXC_CCM_PDR3_ESDHC3_PRDF_MASK           (0x7 << 19)
 #define MXC_CCM_PDR3_ESDHC3_PODF_OFFSET         16
-#define MXC_CCM_PDR3_ESDHC3_PODF_MASK           (0x7 << 16)
-#define MXC_CCM_PDR3_UART_M_U			(1 << 15)
-#define MXC_CCM_PDR3_ESDHC2_PRDF_OFFSET         11
-#define MXC_CCM_PDR3_ESDHC2_PRDF_MASK           (0x7 << 11)
+#define MXC_CCM_PDR3_ESDHC3_PODF_MASK           (0x3F << 16)
+#define MXC_CCM_PDR3_UART_M_U			(1 << 14)
 #define MXC_CCM_PDR3_ESDHC2_PODF_OFFSET         8
-#define MXC_CCM_PDR3_ESDHC2_PODF_MASK           (0x7 << 8)
+#define MXC_CCM_PDR3_ESDHC2_PODF_MASK           (0x3F << 8)
 #define MXC_CCM_PDR3_ESDHC_M_U			(1 << 6)
-#define MXC_CCM_PDR3_ESDHC1_PRDF_OFFSET         3
-#define MXC_CCM_PDR3_ESDHC1_PRDF_MASK           (0x7 << 3)
 #define MXC_CCM_PDR3_ESDHC1_PODF_OFFSET         0
-#define MXC_CCM_PDR3_ESDHC1_PODF_MASK           (0x7)
+#define MXC_CCM_PDR3_ESDHC1_PODF_MASK           (0x3F)
 
 #define MXC_CCM_PDR4_NFC_PODF_OFFSET		28
 #define MXC_CCM_PDR4_NFC_PODF_MASK		(0xF << 28)
-#define MXC_CCM_PDR4_USB_PRDF_OFFSET		25
-#define MXC_CCM_PDR4_USB_PRDF_MASK		(0x7 << 25)
 #define MXC_CCM_PDR4_USB_PODF_OFFSET		22
-#define MXC_CCM_PDR4_USB_PODF_MASK		(0x7 << 22)
-#define MXC_CCM_PDR4_PER0_PRDF_OFFSET		19
-#define MXC_CCM_PDR4_PER0_PRDF_MASK		(0x7 << 19)
+#define MXC_CCM_PDR4_USB_PODF_MASK		(0x3F << 22)
 #define MXC_CCM_PDR4_PER0_PODF_OFFSET		16
-#define MXC_CCM_PDR4_PER0_PODF_MASK		(0x7 << 16)
-#define MXC_CCM_PDR4_UART_PRDF_OFFSET		13
-#define MXC_CCM_PDR4_UART_PRDF_MASK		(0x7 << 13)
+#define MXC_CCM_PDR4_PER0_PODF_MASK		(0x3F << 16)
 #define MXC_CCM_PDR4_UART_PODF_OFFSET		10
-#define MXC_CCM_PDR4_UART_PODF_MASK		(0x7 << 10)
+#define MXC_CCM_PDR4_UART_PODF_MASK		(0x3F << 10)
 #define MXC_CCM_PDR4_USB_M_U			(1 << 9)
 
 /* Bit definitions for RCSR */
@@ -144,6 +130,12 @@
 #define MXC_CCM_ACMR_SSI2_CLK_SEL_MASK		(0xF << 0)
 
 /* Bit definitions for Clock gating Register*/
+#define MXC_CCM_CGR_CG_MASK			0x3
+#define MXC_CCM_CGR_CG_OFF			0x0
+#define MXC_CCM_CGR_CG_RUN_ON			0x1
+#define MXC_CCM_CGR_CG_RUN_WAIT_ON		0x2
+#define MXC_CCM_CGR_CG_ON			0x3
+
 #define MXC_CCM_CGR0_ASRC_OFFSET		0
 #define MXC_CCM_CGR0_ASRC_MASK			(0x3 << 0)
 #define MXC_CCM_CGR0_ATA_OFFSET			2
@@ -251,10 +243,8 @@
 #define MXC_CCM_COSR_CLKOSEL_OFFSET		0
 #define MXC_CCM_COSR_CLKOEN			(1 << 5)
 #define MXC_CCM_COSR_CLKOUTDIV_1		(1 << 6)
-#define MXC_CCM_COSR_CLKOUT_PREDIV_MASK		(0x7 << 10)
-#define MXC_CCM_COSR_CLKOUT_PREDIV_OFFSET	10
-#define MXC_CCM_COSR_CLKOUT_PRODIV_MASK		(0x7 << 13)
-#define MXC_CCM_COSR_CLKOUT_PRODIV_OFFSET	13
+#define MXC_CCM_COSR_CLKOUT_DIV_MASK		(0x3F << 10)
+#define MXC_CCM_COSR_CLKOUT_DIV_OFFSET		10
 #define MXC_CCM_COSR_SSI1_RX_SRC_SEL_MASK	(0x3 << 16)
 #define MXC_CCM_COSR_SSI1_RX_SRC_SEL_OFFSET	16
 #define MXC_CCM_COSR_SSI1_TX_SRC_SEL_MASK	(0x3 << 18)

arch/arm/include/asm/arch-mx6/iomux.h

@@ -34,21 +34,21 @@
 #define IOMUXC_GPR13_SATA_PHY_2_MASK	(0x1f<<2)
 #define IOMUXC_GPR13_SATA_PHY_1_MASK	(3<<0)
 
-#define IOMUXC_GPR13_SATA_PHY_8_RXEQ_0P5DB	(0b000<<24)
-#define IOMUXC_GPR13_SATA_PHY_8_RXEQ_1P0DB	(0b001<<24)
-#define IOMUXC_GPR13_SATA_PHY_8_RXEQ_1P5DB	(0b010<<24)
-#define IOMUXC_GPR13_SATA_PHY_8_RXEQ_2P0DB	(0b011<<24)
-#define IOMUXC_GPR13_SATA_PHY_8_RXEQ_2P5DB	(0b100<<24)
-#define IOMUXC_GPR13_SATA_PHY_8_RXEQ_3P0DB	(0b101<<24)
-#define IOMUXC_GPR13_SATA_PHY_8_RXEQ_3P5DB	(0b110<<24)
-#define IOMUXC_GPR13_SATA_PHY_8_RXEQ_4P0DB	(0b111<<24)
+#define IOMUXC_GPR13_SATA_PHY_8_RXEQ_0P5DB	(0<<24)
+#define IOMUXC_GPR13_SATA_PHY_8_RXEQ_1P0DB	(1<<24)
+#define IOMUXC_GPR13_SATA_PHY_8_RXEQ_1P5DB	(2<<24)
+#define IOMUXC_GPR13_SATA_PHY_8_RXEQ_2P0DB	(3<<24)
+#define IOMUXC_GPR13_SATA_PHY_8_RXEQ_2P5DB	(4<<24)
+#define IOMUXC_GPR13_SATA_PHY_8_RXEQ_3P0DB	(5<<24)
+#define IOMUXC_GPR13_SATA_PHY_8_RXEQ_3P5DB	(6<<24)
+#define IOMUXC_GPR13_SATA_PHY_8_RXEQ_4P0DB	(7<<24)
 
-#define IOMUXC_GPR13_SATA_PHY_7_SATA1I	(0b10000<<19)
-#define IOMUXC_GPR13_SATA_PHY_7_SATA1M	(0b10000<<19)
-#define IOMUXC_GPR13_SATA_PHY_7_SATA1X	(0b11010<<19)
-#define IOMUXC_GPR13_SATA_PHY_7_SATA2I	(0b10010<<19)
-#define IOMUXC_GPR13_SATA_PHY_7_SATA2M	(0b10010<<19)
-#define IOMUXC_GPR13_SATA_PHY_7_SATA2X	(0b11010<<19)
+#define IOMUXC_GPR13_SATA_PHY_7_SATA1I	(0x10<<19)
+#define IOMUXC_GPR13_SATA_PHY_7_SATA1M	(0x10<<19)
+#define IOMUXC_GPR13_SATA_PHY_7_SATA1X	(0x1A<<19)
+#define IOMUXC_GPR13_SATA_PHY_7_SATA2I	(0x12<<19)
+#define IOMUXC_GPR13_SATA_PHY_7_SATA2M	(0x12<<19)
+#define IOMUXC_GPR13_SATA_PHY_7_SATA2X	(0x1A<<19)
 
 #define IOMUXC_GPR13_SATA_SPEED_1P5G	(0<<15)
 #define IOMUXC_GPR13_SATA_SPEED_3G	(1<<15)
@@ -63,55 +63,55 @@
 #define IOMUXC_GPR13_SATA_SATA_PHY_4_ATTEN_9_16		(4<<11)
 #define IOMUXC_GPR13_SATA_SATA_PHY_4_ATTEN_8_16		(5<<11)
 
-#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_0P00_DB	(0b0000<<7)
-#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_0P37_DB	(0b0001<<7)
-#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_0P74_DB	(0b0010<<7)
-#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_1P11_DB	(0b0011<<7)
-#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_1P48_DB	(0b0100<<7)
-#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_1P85_DB	(0b0101<<7)
-#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_2P22_DB	(0b0110<<7)
-#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_2P59_DB	(0b0111<<7)
-#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_2P96_DB	(0b1000<<7)
-#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_3P33_DB	(0b1001<<7)
-#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_3P70_DB	(0b1010<<7)
-#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_4P07_DB	(0b1011<<7)
-#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_4P44_DB	(0b1100<<7)
-#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_4P81_DB	(0b1101<<7)
-#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_5P28_DB	(0b1110<<7)
-#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_5P75_DB	(0b1111<<7)
+#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_0P00_DB	(0<<7)
+#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_0P37_DB	(1<<7)
+#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_0P74_DB	(2<<7)
+#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_1P11_DB	(3<<7)
+#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_1P48_DB	(4<<7)
+#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_1P85_DB	(5<<7)
+#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_2P22_DB	(6<<7)
+#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_2P59_DB	(7<<7)
+#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_2P96_DB	(8<<7)
+#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_3P33_DB	(9<<7)
+#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_3P70_DB	(0xA<<7)
+#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_4P07_DB	(0xB<<7)
+#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_4P44_DB	(0xC<<7)
+#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_4P81_DB	(0xD<<7)
+#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_5P28_DB	(0xE<<7)
+#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_5P75_DB	(0xF<<7)
 
-#define IOMUXC_GPR13_SATA_PHY_2_TX_0P937V	(0b00000<<2)
-#define IOMUXC_GPR13_SATA_PHY_2_TX_0P947V	(0b00001<<2)
-#define IOMUXC_GPR13_SATA_PHY_2_TX_0P957V	(0b00010<<2)
-#define IOMUXC_GPR13_SATA_PHY_2_TX_0P966V	(0b00011<<2)
-#define IOMUXC_GPR13_SATA_PHY_2_TX_0P976V	(0b00100<<2)
-#define IOMUXC_GPR13_SATA_PHY_2_TX_0P986V	(0b00101<<2)
-#define IOMUXC_GPR13_SATA_PHY_2_TX_0P996V	(0b00110<<2)
-#define IOMUXC_GPR13_SATA_PHY_2_TX_1P005V	(0b00111<<2)
-#define IOMUXC_GPR13_SATA_PHY_2_TX_1P015V	(0b01000<<2)
-#define IOMUXC_GPR13_SATA_PHY_2_TX_1P025V	(0b01001<<2)
-#define IOMUXC_GPR13_SATA_PHY_2_TX_1P035V	(0b01010<<2)
-#define IOMUXC_GPR13_SATA_PHY_2_TX_1P045V	(0b01011<<2)
-#define IOMUXC_GPR13_SATA_PHY_2_TX_1P054V	(0b01100<<2)
-#define IOMUXC_GPR13_SATA_PHY_2_TX_1P064V	(0b01101<<2)
-#define IOMUXC_GPR13_SATA_PHY_2_TX_1P074V	(0b01110<<2)
-#define IOMUXC_GPR13_SATA_PHY_2_TX_1P084V	(0b01111<<2)
-#define IOMUXC_GPR13_SATA_PHY_2_TX_1P094V	(0b10000<<2)
-#define IOMUXC_GPR13_SATA_PHY_2_TX_1P104V	(0b10001<<2)
-#define IOMUXC_GPR13_SATA_PHY_2_TX_1P113V	(0b10010<<2)
-#define IOMUXC_GPR13_SATA_PHY_2_TX_1P123V	(0b10011<<2)
-#define IOMUXC_GPR13_SATA_PHY_2_TX_1P133V	(0b10100<<2)
-#define IOMUXC_GPR13_SATA_PHY_2_TX_1P143V	(0b10101<<2)
-#define IOMUXC_GPR13_SATA_PHY_2_TX_1P152V	(0b10110<<2)
-#define IOMUXC_GPR13_SATA_PHY_2_TX_1P162V	(0b10111<<2)
-#define IOMUXC_GPR13_SATA_PHY_2_TX_1P172V	(0b11000<<2)
-#define IOMUXC_GPR13_SATA_PHY_2_TX_1P182V	(0b11001<<2)
-#define IOMUXC_GPR13_SATA_PHY_2_TX_1P191V	(0b11010<<2)
-#define IOMUXC_GPR13_SATA_PHY_2_TX_1P201V	(0b11011<<2)
-#define IOMUXC_GPR13_SATA_PHY_2_TX_1P211V	(0b11100<<2)
-#define IOMUXC_GPR13_SATA_PHY_2_TX_1P221V	(0b11101<<2)
-#define IOMUXC_GPR13_SATA_PHY_2_TX_1P230V	(0b11110<<2)
-#define IOMUXC_GPR13_SATA_PHY_2_TX_1P240V	(0b11111<<2)
+#define IOMUXC_GPR13_SATA_PHY_2_TX_0P937V	(0<<2)
+#define IOMUXC_GPR13_SATA_PHY_2_TX_0P947V	(1<<2)
+#define IOMUXC_GPR13_SATA_PHY_2_TX_0P957V	(2<<2)
+#define IOMUXC_GPR13_SATA_PHY_2_TX_0P966V	(3<<2)
+#define IOMUXC_GPR13_SATA_PHY_2_TX_0P976V	(4<<2)
+#define IOMUXC_GPR13_SATA_PHY_2_TX_0P986V	(5<<2)
+#define IOMUXC_GPR13_SATA_PHY_2_TX_0P996V	(6<<2)
+#define IOMUXC_GPR13_SATA_PHY_2_TX_1P005V	(7<<2)
+#define IOMUXC_GPR13_SATA_PHY_2_TX_1P015V	(8<<2)
+#define IOMUXC_GPR13_SATA_PHY_2_TX_1P025V	(9<<2)
+#define IOMUXC_GPR13_SATA_PHY_2_TX_1P035V	(0xA<<2)
+#define IOMUXC_GPR13_SATA_PHY_2_TX_1P045V	(0xB<<2)
+#define IOMUXC_GPR13_SATA_PHY_2_TX_1P054V	(0xC<<2)
+#define IOMUXC_GPR13_SATA_PHY_2_TX_1P064V	(0xD<<2)
+#define IOMUXC_GPR13_SATA_PHY_2_TX_1P074V	(0xE<<2)
+#define IOMUXC_GPR13_SATA_PHY_2_TX_1P084V	(0xF<<2)
+#define IOMUXC_GPR13_SATA_PHY_2_TX_1P094V	(0x10<<2)
+#define IOMUXC_GPR13_SATA_PHY_2_TX_1P104V	(0x11<<2)
+#define IOMUXC_GPR13_SATA_PHY_2_TX_1P113V	(0x12<<2)
+#define IOMUXC_GPR13_SATA_PHY_2_TX_1P123V	(0x13<<2)
+#define IOMUXC_GPR13_SATA_PHY_2_TX_1P133V	(0x14<<2)
+#define IOMUXC_GPR13_SATA_PHY_2_TX_1P143V	(0x15<<2)
+#define IOMUXC_GPR13_SATA_PHY_2_TX_1P152V	(0x16<<2)
+#define IOMUXC_GPR13_SATA_PHY_2_TX_1P162V	(0x17<<2)
+#define IOMUXC_GPR13_SATA_PHY_2_TX_1P172V	(0x18<<2)
+#define IOMUXC_GPR13_SATA_PHY_2_TX_1P182V	(0x19<<2)
+#define IOMUXC_GPR13_SATA_PHY_2_TX_1P191V	(0x1A<<2)
+#define IOMUXC_GPR13_SATA_PHY_2_TX_1P201V	(0x1B<<2)
+#define IOMUXC_GPR13_SATA_PHY_2_TX_1P211V	(0x1C<<2)
+#define IOMUXC_GPR13_SATA_PHY_2_TX_1P221V	(0x1D<<2)
+#define IOMUXC_GPR13_SATA_PHY_2_TX_1P230V	(0x1E<<2)
+#define IOMUXC_GPR13_SATA_PHY_2_TX_1P240V	(0x1F<<2)
 
 #define IOMUXC_GPR13_SATA_PHY_1_FAST	0
 #define IOMUXC_GPR13_SATA_PHY_1_MEDIUM	1

board/freescale/mx28evk/iomux.c

@@ -173,7 +173,7 @@ const iomux_cfg_t iomux_setup[] = {
 #define HW_DRAM_CTL29_CONFIG	(CS_MAP << 24 | COLUMN_SIZE << 16 | \
 					ADDR_PINS << 8 | APREBIT)
 
-void mx28_adjust_memory_params(uint32_t *dram_vals)
+void mxs_adjust_memory_params(uint32_t *dram_vals)
 {
 	dram_vals[HW_DRAM_CTL29] = HW_DRAM_CTL29_CONFIG;
 }

board/freescale/mx28evk/mx28evk.c

@@ -49,8 +49,8 @@ int board_early_init_f(void)
 
 	/* SSP0 clock at 96MHz */
 	mx28_set_sspclk(MXC_SSPCLK0, 96000, 0);
-	/* SSP2 clock at 96MHz */
-	mx28_set_sspclk(MXC_SSPCLK2, 96000, 0);
+	/* SSP2 clock at 160MHz */
+	mx28_set_sspclk(MXC_SSPCLK2, 160000, 0);
 
 #ifdef	CONFIG_CMD_USB
 	mxs_iomux_setup_pad(MX28_PAD_SSP2_SS1__USB1_OVERCURRENT);

board/freescale/mx35pdk/README

@@ -71,91 +71,17 @@ exec -c "noinitrd console=ttymxc0,115200 root=/dev/nfsroot rootfstype=nfsroot nf
 Flashing U-Boot
 --------------------------------
 
-There are two options: the original bootloader in NAND can be replaced with
-u-boot, or u-boot can be stored on the NOR flash without erasing
-the delivered bootloader.
+U-boot should be stored on the NOR flash.
+
 The boot storage can be select using the switches on the personality board
 (SW1-SW2) and on the DEBUG board (SW4-SW10).
 
-The second option is to be preferred if you have not a JTAG debugger.
 If something goes wrong flashing the bootloader, it is always possible to
 recover the board booting from the other device.
 
-Replacing the bootloader on the NAND
---------------------------------------
-To replace RedBoot with U-Boot, the easy way is to do this in linux.
-Start the kernel with the suggested options. Make sure to have set the
-mtdparts exactly as described, because this matches the layout on the
-mx35pdk.
-
-You should see in your boot log the following entries for the NAND
-flash:
-
-5 cmdlinepart partitions found on MTD device mxc_nand
-Creating 5 MTD partitions on "mxc_nand":
-0x000000000000-0x000000100000 : "boot"
-0x000000100000-0x000000600000 : "linux"
-0x000000600000-0x000006600000 : "root"
-0x000006600000-0x000006e00000 : "cfg"
-0x000006e00000-0x000080000000 : "user"
-
-You can use the utilities flash_eraseall and nandwrite to put
-u-boot on the NAND. The bootloader is marked as "boot", and 1MB is
-reserved. If everything is correct, this partition is accessed as
-/dev/mtd4. However, check if it is correct with "cat /proc/mtd" and
-get the device node from the partition name:
-
-$ cat /proc/mtd | grep boot
-
-I suggest you try the utilities on a different partition to be sure
-if everything works correctly. If not, and you remove RedBoot, you have to
-reinstall it using the ATK tool as suggested by Freescale, or using a
-JTAG debugger.
-
-I report the versions of the utilities I used (they are provided with ELDK):
-
--bash-3.2# nandwrite --version
-nandwrite $Revision: 1.32 $
-
-flash_eraseall --version
-flash_eraseall $Revision: 1.22 $
-
-nandwrite reports a warning if the file to be saved is not sector aligned.
-This should have no consequences, but I preferred to pad u-boot.bin
-to get no problem at all.
-$ dd if=/dev/zero of=zeros bs=1 count=74800
-$ cat u-boot.bin zeros > u-boot-padded.bin
-
-To erase the partition:
-$ flash_eraseall /dev/mtd4
-
-Writing u-boot:
-
-$ nandwrite /dev/mtd4 u-boot-padded.bin
-
-Now U-Boot is stored on the booting partition.
-
-To boot from NAND, you have to select the switches as follows:
-
-Personality board
-	SW2	1, 4, 5 on
-		2, 3, 6, 7, 8 off
-	SW1	all off
-
-Debug Board:
-	SW5	0
-	SW6	0
-	SW7	0
-	SW8	1
-	SW9	1
-	SW10	0
-
-
 Saving U-Boot in the NOR flash
 ---------------------------------
 
-The procedure to save in the NOR flash is quite the same as to write into the NAND.
-
 Check the partition for boot in the NOR flash. Setting the mtdparts as reported,
 the boot partition should be /dev/mtd0.
 

board/freescale/mx35pdk/mx35pdk.c

@@ -32,6 +32,8 @@
 #include <i2c.h>
 #include <pmic.h>
 #include <fsl_pmic.h>
+#include <mmc.h>
+#include <fsl_esdhc.h>
 #include <mc9sdz60.h>
 #include <mc13892.h>
 #include <linux/types.h>
@@ -275,3 +277,26 @@ int board_eth_init(bd_t *bis)
 
 	return rc;
 }
+
+#if defined(CONFIG_FSL_ESDHC)
+
+struct fsl_esdhc_cfg esdhc_cfg = {MMC_SDHC1_BASE_ADDR};
+
+int board_mmc_init(bd_t *bis)
+{
+	/* configure pins for SDHC1 only */
+	mxc_request_iomux(MX35_PIN_SD1_CMD, MUX_CONFIG_FUNC);
+	mxc_request_iomux(MX35_PIN_SD1_CLK, MUX_CONFIG_FUNC);
+	mxc_request_iomux(MX35_PIN_SD1_DATA0, MUX_CONFIG_FUNC);
+	mxc_request_iomux(MX35_PIN_SD1_DATA1, MUX_CONFIG_FUNC);
+	mxc_request_iomux(MX35_PIN_SD1_DATA2, MUX_CONFIG_FUNC);
+	mxc_request_iomux(MX35_PIN_SD1_DATA3, MUX_CONFIG_FUNC);
+
+	return fsl_esdhc_initialize(bis, &esdhc_cfg);
+}
+
+int board_mmc_getcd(struct mmc *mmc)
+{
+	return !(mc9sdz60_reg_read(MC9SDZ60_REG_DES_FLAG) & 0x4);
+}
+#endif

board/freescale/mx6qsabrelite/mx6qsabrelite.c

@@ -197,18 +197,18 @@ static iomux_v3_cfg_t button_pads[] = {
 
 static void setup_iomux_enet(void)
 {
-	gpio_direction_output(87, 0);  /* GPIO 3-23 */
-	gpio_direction_output(190, 1); /* GPIO 6-30 */
-	gpio_direction_output(185, 1); /* GPIO 6-25 */
-	gpio_direction_output(187, 1); /* GPIO 6-27 */
-	gpio_direction_output(188, 1); /* GPIO 6-28*/
-	gpio_direction_output(189, 1); /* GPIO 6-29 */
+	gpio_direction_output(IMX_GPIO_NR(3, 23), 0);
+	gpio_direction_output(IMX_GPIO_NR(6, 30), 1);
+	gpio_direction_output(IMX_GPIO_NR(6, 25), 1);
+	gpio_direction_output(IMX_GPIO_NR(6, 27), 1);
+	gpio_direction_output(IMX_GPIO_NR(6, 28), 1);
+	gpio_direction_output(IMX_GPIO_NR(6, 29), 1);
 	imx_iomux_v3_setup_multiple_pads(enet_pads1, ARRAY_SIZE(enet_pads1));
-	gpio_direction_output(184, 1); /* GPIO 6-24 */
+	gpio_direction_output(IMX_GPIO_NR(6, 24), 1);
 
 	/* Need delay 10ms according to KSZ9021 spec */
 	udelay(1000 * 10);
-	gpio_set_value(87, 1);  /* GPIO 3-23 */
+	gpio_set_value(IMX_GPIO_NR(3, 23), 1);
 
 	imx_iomux_v3_setup_multiple_pads(enet_pads2, ARRAY_SIZE(enet_pads2));
 }
@@ -249,11 +249,11 @@ int board_mmc_getcd(struct mmc *mmc)
        int ret;
 
        if (cfg->esdhc_base == USDHC3_BASE_ADDR) {
-	       gpio_direction_input(192); /*GPIO7_0*/
-	       ret = !gpio_get_value(192);
+		gpio_direction_input(IMX_GPIO_NR(7, 0));
+		ret = !gpio_get_value(IMX_GPIO_NR(7, 0));
        } else {
-	       gpio_direction_input(38); /*GPIO2_6*/
-	       ret = !gpio_get_value(38);
+		gpio_direction_input(IMX_GPIO_NR(2, 6));
+		ret = !gpio_get_value(IMX_GPIO_NR(2, 6));
        }
 
        return ret;

board/genesi/mx51_efikamx/Makefile

@@ -27,11 +27,7 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(BOARD).o
 
-COBJS	:= efikamx.o
-
-ifdef	CONFIG_CMD_USB
-COBJS	+= efikamx-usb.o
-endif
+COBJS	:= efikamx.o efikamx-usb.o
 
 SRCS	:= $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))

board/genesi/mx51_efikamx/efikamx-usb.c

@@ -214,3 +214,15 @@ void board_ehci_hcd_postinit(struct usb_ehci *ehci, int port)
 	if (port)
 		mdelay(10);
 }
+
+/*
+ * Ethernet on the Smarttop is on the USB bus. Rather than give an error about
+ * "CPU Net Initialization Failed", just pass this test since no other settings
+ * are required. Smartbook doesn't have built-in Ethernet but we will let it
+ * pass anyway considering someone may have plugged in a USB stick and all
+ * they need to do is run "usb start".
+ */
+int board_eth_init(bd_t *bis)
+{
+	return 0;
+}

board/genesi/mx51_efikamx/efikamx.c

@@ -492,9 +492,6 @@ int board_late_init(void)
 					ARRAY_SIZE(efikamx_pata_pads));
 	setup_iomux_usb();
 
-	if (machine_is_efikasb())
-		setenv("preboot", "usb reset ; setenv stdin usbkbd\0");
-
 	return 0;
 }
 

drivers/mmc/mxsmmc.c

@@ -119,6 +119,10 @@ static int mxsmmc_send_cmd_dma(struct mxsmmc_priv *priv, struct mmc_data *data)
 			(uint32_t)(priv->desc->cmd.address + cache_data_count));
 	}
 
+	/* Invalidate the area, so no writeback into the RAM races with DMA */
+	invalidate_dcache_range((uint32_t)priv->desc->cmd.address,
+			(uint32_t)(priv->desc->cmd.address + cache_data_count));
+
 	priv->desc->cmd.data |= MXS_DMA_DESC_IRQ | MXS_DMA_DESC_DEC_SEM |
 				(data_count << MXS_DMA_DESC_BYTES_OFFSET);
 

drivers/spi/mxs_spi.c

@@ -224,8 +224,10 @@ static int mxs_spi_xfer_dma(struct mxs_spi_slave *slave,
 	struct mxs_dma_desc *dp;
 	uint32_t ctrl0;
 	uint32_t cache_data_count;
+	const uint32_t dstart = (uint32_t)data;
 	int dmach;
 	int tl;
+	int ret = 0;
 
 	ALLOC_CACHE_ALIGN_BUFFER(struct mxs_dma_desc, desc, desc_count);
 
@@ -239,17 +241,17 @@ static int mxs_spi_xfer_dma(struct mxs_spi_slave *slave,
 	if (!write)
 		ctrl0 |= SSP_CTRL0_READ;
 
-	writel(length, &ssp_regs->hw_ssp_xfer_size);
-
 	if (length % ARCH_DMA_MINALIGN)
 		cache_data_count = roundup(length, ARCH_DMA_MINALIGN);
 	else
 		cache_data_count = length;
 
+	/* Flush data to DRAM so DMA can pick them up */
 	if (write)
-		/* Flush data to DRAM so DMA can pick them up */
-		flush_dcache_range((uint32_t)data,
-			(uint32_t)(data + cache_data_count));
+		flush_dcache_range(dstart, dstart + cache_data_count);
+
+	/* Invalidate the area, so no writeback into the RAM races with DMA */
+	invalidate_dcache_range(dstart, dstart + cache_data_count);
 
 	dmach = MXS_DMA_CHANNEL_AHB_APBH_SSP0 + slave->slave.bus;
 
@@ -281,41 +283,47 @@ static int mxs_spi_xfer_dma(struct mxs_spi_slave *slave,
 			tl = min(length, xfer_max_sz);
 
 		dp->cmd.data |=
-			(tl << MXS_DMA_DESC_BYTES_OFFSET) |
-			(1 << MXS_DMA_DESC_PIO_WORDS_OFFSET) |
+			((tl & 0xffff) << MXS_DMA_DESC_BYTES_OFFSET) |
+			(4 << MXS_DMA_DESC_PIO_WORDS_OFFSET) |
 			MXS_DMA_DESC_HALT_ON_TERMINATE |
 			MXS_DMA_DESC_TERMINATE_FLUSH;
-		dp->cmd.pio_words[0] = ctrl0;
 
 		data += tl;
 		length -= tl;
 
+		if (!length) {
+			dp->cmd.data |= MXS_DMA_DESC_IRQ | MXS_DMA_DESC_DEC_SEM;
+
+			if (flags & SPI_XFER_END) {
+				ctrl0 &= ~SSP_CTRL0_LOCK_CS;
+				ctrl0 |= SSP_CTRL0_IGNORE_CRC;
+			}
+		}
+
+		/*
+		 * Write CTRL0, CMD0, CMD1, XFER_SIZE registers. It is
+		 * essential that the XFER_SIZE register is written on
+		 * a per-descriptor basis with the same size as is the
+		 * descriptor!
+		 */
+		dp->cmd.pio_words[0] = ctrl0;
+		dp->cmd.pio_words[1] = 0;
+		dp->cmd.pio_words[2] = 0;
+		dp->cmd.pio_words[3] = tl;
+
 		mxs_dma_desc_append(dmach, dp);
 
 		dp++;
 	}
 
-	dp->address = (dma_addr_t)dp;
-	dp->cmd.address = (dma_addr_t)0;
-	dp->cmd.data = MXS_DMA_DESC_COMMAND_NO_DMAXFER |
-			(1 << MXS_DMA_DESC_PIO_WORDS_OFFSET) |
-			MXS_DMA_DESC_IRQ | MXS_DMA_DESC_DEC_SEM;
-	if (flags & SPI_XFER_END) {
-		ctrl0 &= ~SSP_CTRL0_LOCK_CS;
-		dp->cmd.pio_words[0] = ctrl0 | SSP_CTRL0_IGNORE_CRC;
-	}
-	mxs_dma_desc_append(dmach, dp);
-
 	if (mxs_dma_go(dmach))
-		return -EINVAL;
+		ret = -EINVAL;
 
 	/* The data arrived into DRAM, invalidate cache over them */
-	if (!write) {
-		invalidate_dcache_range((uint32_t)data,
-			(uint32_t)(data + cache_data_count));
-	}
+	if (!write)
+		invalidate_dcache_range(dstart, dstart + cache_data_count);
 
-	return 0;
+	return ret;
 }
 
 int spi_xfer(struct spi_slave *slave, unsigned int bitlen,

include/configs/flea3.h

@@ -31,7 +31,6 @@
  /* High Level Configuration Options */
 #define CONFIG_ARM1136	/* This is an arm1136 CPU core */
 #define CONFIG_MX35
-#define CONFIG_MX35_HCLK_FREQ	24000000
 
 #define CONFIG_SYS_DCACHE_OFF
 #define CONFIG_SYS_CACHELINE_SIZE	32

include/configs/ima3-mx53.h

@@ -64,7 +64,6 @@
 /* Ethernet on FEC */
 #define CONFIG_NET_MULTI
 #define CONFIG_MII
-#define CONFIG_DISCOVER_PHY
 
 #define CONFIG_FEC_MXC
 #define IMX_FEC_BASE			FEC_BASE_ADDR
@@ -72,7 +71,7 @@
 #define CONFIG_PHY_ADDR			CONFIG_FEC_MXC_PHYADDR
 #define CONFIG_RESET_PHY_R
 #define CONFIG_FEC_MXC_NO_ANEG
-#define CONFIG_PRIME	"FEC0"
+#define CONFIG_ETHPRIME			"FEC0"
 
 /* SPI */
 #define CONFIG_HARD_SPI

include/configs/imx31_litekit.h

@@ -33,7 +33,6 @@
  /* High Level Configuration Options */
 #define CONFIG_ARM1136		1    /* This is an arm1136 CPU core */
 #define CONFIG_MX31		1    /* in a mx31 */
-#define CONFIG_MX31_HCLK_FREQ	26000000
 #define CONFIG_MX31_CLK32	32000
 
 #define CONFIG_DISPLAY_CPUINFO

include/configs/imx31_phycore.h

@@ -33,7 +33,6 @@
 /* High Level Configuration Options */
 #define CONFIG_ARM1136			/* This is an arm1136 CPU core */
 #define CONFIG_MX31			/* in a mx31 */
-#define CONFIG_MX31_HCLK_FREQ	26000000
 #define CONFIG_MX31_CLK32	32000
 
 #define CONFIG_DISPLAY_CPUINFO

include/configs/m28evk.h

@@ -171,9 +171,9 @@
 #define	CONFIG_LZO
 #define	CONFIG_MTD_DEVICE
 #define	CONFIG_MTD_PARTITIONS
-#define	MTDIDS_DEFAULT			"nand0=gpmi-nand.0"
+#define	MTDIDS_DEFAULT			"nand0=gpmi-nand"
 #define	MTDPARTS_DEFAULT			\
-	"mtdparts=gpmi-nand.0:"			\
+	"mtdparts=gpmi-nand:"			\
 		"3m(bootloader)ro,"		\
 		"512k(environment),"		\
 		"512k(redundant-environment),"	\

include/configs/mx25pdk.h

@@ -17,7 +17,6 @@
 
 /* High Level Configuration Options */
 
-#define CONFIG_MX25_CLK32		32768	/* OSC32K frequency */
 #define CONFIG_SYS_HZ			1000
 #define CONFIG_SYS_TEXT_BASE		0x81200000
 

include/configs/mx28evk.h

@@ -184,6 +184,9 @@
 #define	CONFIG_EHCI_MXS_PORT 1
 #define	CONFIG_EHCI_IS_TDI
 #define	CONFIG_USB_STORAGE
+#define	CONFIG_USB_HOST_ETHER
+#define	CONFIG_USB_ETHER_ASIX
+#define	CONFIG_USB_ETHER_SMSC95XX
 #endif
 
 /* I2C */
@@ -199,6 +202,7 @@
 #ifdef CONFIG_CMD_SPI
 #define CONFIG_HARD_SPI
 #define CONFIG_MXS_SPI
+#define CONFIG_MXS_SPI_DMA_ENABLE
 #define CONFIG_SPI_HALF_DUPLEX
 #define CONFIG_DEFAULT_SPI_BUS		2
 #define CONFIG_DEFAULT_SPI_MODE		SPI_MODE_0
@@ -235,7 +239,6 @@
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_BOOTDELAY	3
 #define CONFIG_BOOTFILE	"uImage"
-#define CONFIG_BOOTCOMMAND	"run bootcmd_net"
 #define CONFIG_LOADADDR	0x42000000
 #define CONFIG_SYS_LOAD_ADDR	CONFIG_LOADADDR
 #define CONFIG_OF_LIBFDT
@@ -244,13 +247,80 @@
  * Extra Environments
  */
 #define CONFIG_EXTRA_ENV_SETTINGS \
-	"console_fsl=console=ttyAM0" \
-	"console_mainline=console=ttyAMA0" \
-	"netargs=setenv bootargs console=${console_mainline}" \
+	"update_nand_full_filename=u-boot.nand\0" \
+	"update_nand_firmware_filename=u-boot.sb\0"	\
+	"update_sd_firmware_filename=u-boot.sd\0" \
+	"update_nand_firmware_maxsz=0x100000\0"	\
+	"update_nand_stride=0x40\0"	/* MX28 datasheet ch. 12.12 */ \
+	"update_nand_count=0x4\0"	/* MX28 datasheet ch. 12.12 */ \
+	"update_nand_get_fcb_size="	/* Get size of FCB blocks */ \
+		"nand device 0 ; " \
+		"nand info ; " \
+		"setexpr fcb_sz ${update_nand_stride} * ${update_nand_count};" \
+		"setexpr update_nand_fcb ${fcb_sz} * ${nand_writesize}\0" \
+	"update_nand_full="		    /* Update FCB, DBBT and FW */ \
+		"if tftp ${update_nand_full_filename} ; then " \
+		"run update_nand_get_fcb_size ; " \
+		"nand scrub -y 0x0 ${filesize} ; " \
+		"nand write.raw ${loadaddr} 0x0 ${update_nand_fcb} ; " \
+		"setexpr update_off ${loadaddr} + ${update_nand_fcb} ; " \
+		"setexpr update_sz ${filesize} - ${update_nand_fcb} ; " \
+		"nand write ${update_off} ${update_nand_fcb} ${update_sz} ; " \
+		"fi\0" \
+	"update_nand_firmware="		/* Update only firmware */ \
+		"if tftp ${update_nand_firmware_filename} ; then " \
+		"run update_nand_get_fcb_size ; " \
+		"setexpr fcb_sz ${update_nand_fcb} * 2 ; " /* FCB + DBBT */ \
+		"setexpr fw_sz ${update_nand_firmware_maxsz} * 2 ; " \
+		"setexpr fw_off ${fcb_sz} + ${update_nand_firmware_maxsz};" \
+		"nand erase ${fcb_sz} ${fw_sz} ; " \
+		"nand write ${loadaddr} ${fcb_sz} ${filesize} ; " \
+		"nand write ${loadaddr} ${fw_off} ${filesize} ; " \
+		"fi\0" \
+	"update_sd_firmware="		/* Update the SD firmware partition */ \
+		"if mmc rescan ; then "	\
+		"if tftp ${update_sd_firmware_filename} ; then " \
+		"setexpr fw_sz ${filesize} / 0x200 ; "	/* SD block size */ \
+		"setexpr fw_sz ${fw_sz} + 1 ; "	\
+		"mmc write ${loadaddr} 0x800 ${fw_sz} ; " \
+		"fi ; "	\
+		"fi\0" \
+	"script=boot.scr\0"	\
+	"uimage=uImage\0" \
+	"console_fsl=ttyAM0\0" \
+	"console_mainline=ttyAMA0\0" \
+	"mmcdev=0\0" \
+	"mmcpart=2\0" \
+	"mmcroot=/dev/mmcblk0p3 rw\0" \
+	"mmcrootfstype=ext3 rootwait\0"	\
+	"mmcargs=setenv bootargs console=${console_mainline},${baudrate} " \
+		"root=${mmcroot} " \
+		"rootfstype=${mmcrootfstype}\0"	\
+	"loadbootscript="  \
+		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
+	"bootscript=echo Running bootscript from mmc ...; "	\
+		"source\0" \
+	"loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
+	"mmcboot=echo Booting from mmc ...; " \
+		"run mmcargs; "	\
+		"bootm\0" \
+	"netargs=setenv bootargs console=${console_mainline},${baudrate} " \
 		"root=/dev/nfs " \
-		"ip=dhcp nfsroot=${serverip}:${nfsroot}\0" \
-	"bootcmd_net=echo Booting from net ...; " \
-		"run netargs; " \
-		"dhcp ${uimage}; bootm\0" \
+		"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
+	"netboot=echo Booting from net ...; " \
+		"run netargs; "	\
+		"dhcp ${uimage}; bootm\0"
+
+#define CONFIG_BOOTCOMMAND \
+	"if mmc rescan ${mmcdev}; then " \
+		"if run loadbootscript; then " \
+			"run bootscript; " \
+		"else " \
+			"if run loaduimage; then " \
+				"run mmcboot; " \
+			"else run netboot; " \
+			"fi; " \
+		"fi; " \
+	"else run netboot; fi"
 
 #endif /* __MX28EVK_CONFIG_H__ */

include/configs/mx31ads.h

@@ -27,8 +27,6 @@
  /* High Level Configuration Options */
 #define CONFIG_ARM1136		1		/* This is an arm1136 CPU core */
 #define CONFIG_MX31		1		/* in a mx31 */
-#define CONFIG_MX31_HCLK_FREQ	26000000	/* RedBoot says 26MHz */
-#define CONFIG_MX31_CLK32	32768
 
 #define CONFIG_DISPLAY_CPUINFO
 #define CONFIG_DISPLAY_BOARDINFO

include/configs/mx31pdk.h

@@ -35,8 +35,6 @@
 /* High Level Configuration Options */
 #define CONFIG_ARM1136			/* This is an arm1136 CPU core */
 #define CONFIG_MX31			/* in a mx31 */
-#define CONFIG_MX31_HCLK_FREQ	26000000
-#define CONFIG_MX31_CLK32	32768
 
 #define CONFIG_DISPLAY_CPUINFO
 #define CONFIG_DISPLAY_BOARDINFO

include/configs/mx35pdk.h

@@ -31,7 +31,6 @@
  /* High Level Configuration Options */
 #define CONFIG_ARM1136	/* This is an arm1136 CPU core */
 #define CONFIG_MX35
-#define CONFIG_MX35_HCLK_FREQ	24000000
 
 #define CONFIG_DISPLAY_CPUINFO
 
@@ -111,6 +110,12 @@
 #define CONFIG_NET_RETRY_COUNT	100
 #define CONFIG_CMD_DATE
 
+#define CONFIG_CMD_MMC
+#define CONFIG_DOS_PARTITION
+#define CONFIG_EFI_PARTITION
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+
 #define CONFIG_BOOTDELAY	3
 
 #define CONFIG_LOADADDR		0x80800000	/* loadaddr env var */
@@ -238,6 +243,13 @@
 #define CONFIG_MXC_NAND_HWECC
 #define CONFIG_SYS_NAND_LARGEPAGE
 
+/* mmc driver */
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_FSL_ESDHC
+#define CONFIG_SYS_FSL_ESDHC_ADDR	0
+#define CONFIG_SYS_FSL_ESDHC_NUM	1
+
 /*
  * Default environment and default scripts
  * to update uboot and load kernel
@@ -279,8 +291,8 @@
 	"u-boot=" xstr(CONFIG_HOSTNAME) "/u-boot.bin\0"			\
 	"load=tftp ${loadaddr} ${u-boot}\0"				\
 	"uboot_addr=" xstr(CONFIG_SYS_MONITOR_BASE) "\0"		\
-	"update=protect off ${uboot_addr} +40000;"			\
-		"erase ${uboot_addr} +40000;"				\
+	"update=protect off ${uboot_addr} +80000;"			\
+		"erase ${uboot_addr} +80000;"				\
 		"cp.b ${loadaddr} ${uboot_addr} ${filesize}\0"		\
 	"upd=if run load;then echo Updating u-boot;if run update;"	\
 		"then echo U-Boot updated;"				\

include/configs/qong.h

@@ -28,8 +28,6 @@
 #define CONFIG_ARM1136			/* This is an arm1136 CPU core */
 #define CONFIG_MX31			/* in a mx31 */
 #define CONFIG_QONG
-#define CONFIG_MX31_HCLK_FREQ	26000000	/* 26MHz */
-#define CONFIG_MX31_CLK32	32768
 
 #define CONFIG_DISPLAY_CPUINFO
 #define CONFIG_DISPLAY_BOARDINFO

include/configs/sc_sps_1.h

@@ -39,8 +39,6 @@
 #include <asm/arch/regs-base.h>
 
 #define CONFIG_SYS_NO_FLASH
-#define CONFIG_SYS_ICACHE_OFF
-#define CONFIG_SYS_DCACHE_OFF
 #define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_ARCH_CPU_INIT
 #define CONFIG_ARCH_MISC_INIT

include/configs/tt01.h

@@ -31,8 +31,6 @@
 /* High Level Configuration Options */
 #define CONFIG_ARM1136
 #define CONFIG_MX31
-#define CONFIG_MX31_HCLK_FREQ	26000000
-#define CONFIG_MX31_CLK32	32768
 
 #define CONFIG_DISPLAY_CPUINFO
 #define CONFIG_DISPLAY_BOARDINFO

include/configs/zmx25.h

@@ -28,7 +28,6 @@
 
 #define CONFIG_ARM926EJS			/* arm926ejs CPU core */
 #define CONFIG_MX25
-#define CONFIG_MX25_CLK32		32768	/* OSC32K frequency */
 #define CONFIG_SYS_HZ			1000
 #define CONFIG_SYS_TEXT_BASE		0xA0000000