Merge branch 'master' of git://git.denx.de/u-boot-arm

* 'master' of git://git.denx.de/u-boot-arm:
  ARM: lib: Remove CONFIG_ARCH_CPU_INIT dependency
  ARM: OMAP4: PANDA: Add rest of the USB module pads to essentials
  arm: armv7: add compile option -mno-unaligned-access if available
  arm: Fix to mistake clean the memory space

Signed-off-by: Wolfgang Denk <wd@denx.de>

arch/arm/cpu/arm1136/start.S

@@ -251,10 +251,12 @@ clear_bss:
 	add	r1, r1, r4
 	mov	r2, #0x00000000		/* clear			    */
 
-clbss_l:str	r2, [r0]		/* clear loop...		    */
+clbss_l:cmp	r0, r1			/* clear loop... */
+	bhs	clbss_e			/* if reached end of bss, exit */
+	str	r2, [r0]
 	add	r0, r0, #4
-	cmp	r0, r1
-	bne	clbss_l
+	b	clbss_l
+clbss_e:
 #endif	/* #ifndef CONFIG_SPL_BUILD */
 
 /*

arch/arm/cpu/arm1176/start.S

@@ -351,11 +351,12 @@ clear_bss:
 	add	r1, r1, r4
 	mov	r2, #0x00000000		/* clear			    */
 
-clbss_l:str	r2, [r0]		/* clear loop...		    */
+clbss_l:cmp	r0, r1			/* clear loop... */
+	bhs	clbss_e			/* if reached end of bss, exit */
+	str	r2, [r0]
 	add	r0, r0, #4
-	cmp	r0, r1
-	bne	clbss_l
-
+	b	clbss_l
+clbss_e:
 #ifndef CONFIG_NAND_SPL
 	bl coloured_LED_init
 	bl red_led_on

arch/arm/cpu/arm720t/start.S

@@ -228,10 +228,12 @@ clear_bss:
 	add	r1, r1, r4
 	mov	r2, #0x00000000		/* clear			    */
 
-clbss_l:str	r2, [r0]		/* clear loop...		    */
+clbss_l:cmp	r0, r1			/* clear loop... */
+	bhs	clbss_e			/* if reached end of bss, exit */
+	str	r2, [r0]
 	add	r0, r0, #4
-	cmp	r0, r1
-	bne	clbss_l
+	b	clbss_l
+clbss_e:
 
 	bl coloured_LED_init
 	bl red_led_on

arch/arm/cpu/arm920t/start.S

@@ -271,10 +271,12 @@ clear_bss:
 	add	r1, r1, r4
 	mov	r2, #0x00000000		/* clear			    */
 
-clbss_l:str	r2, [r0]		/* clear loop...		    */
+clbss_l:cmp	r0, r1			/* clear loop... */
+	bhs	clbss_e			/* if reached end of bss, exit */
+	str	r2, [r0]
 	add	r0, r0, #4
-	cmp	r0, r1
-	bne	clbss_l
+	b	clbss_l
+clbss_e:
 
 	bl coloured_LED_init
 	bl red_led_on

arch/arm/cpu/arm925t/start.S

@@ -265,10 +265,12 @@ clear_bss:
 	add	r1, r1, r4
 	mov	r2, #0x00000000		/* clear			    */
 
-clbss_l:str	r2, [r0]		/* clear loop...		    */
+clbss_l:cmp	r0, r1			/* clear loop... */
+	bhs	clbss_e			/* if reached end of bss, exit */
+	str	r2, [r0]
 	add	r0, r0, #4
-	cmp	r0, r1
-	bne	clbss_l
+	b	clbss_l
+clbss_e:
 
 	bl coloured_LED_init
 	bl red_led_on

arch/arm/cpu/arm946es/start.S

@@ -236,10 +236,12 @@ clear_bss:
 	add	r1, r1, r4
 	mov	r2, #0x00000000		/* clear			    */
 
-clbss_l:str	r2, [r0]		/* clear loop...		    */
+clbss_l:cmp	r0, r1			/* clear loop... */
+	bhs	clbss_e			/* if reached end of bss, exit */
+	str	r2, [r0]
 	add	r0, r0, #4
-	cmp	r0, r1
-	blo	clbss_l
+	b	clbss_l
+clbss_e:
 #endif
 
 /*

arch/arm/cpu/arm_intcm/start.S

@@ -232,10 +232,12 @@ clear_bss:
 	add	r1, r1, r4
 	mov	r2, #0x00000000		/* clear			    */
 
-clbss_l:str	r2, [r0]		/* clear loop...		    */
+clbss_l:cmp	r0, r1			/* clear loop... */
+	bhs	clbss_e			/* if reached end of bss, exit */
+	str	r2, [r0]
 	add	r0, r0, #4
-	cmp	r0, r1
-	bne	clbss_l
+	b	clbss_l
+clbss_e:
 
 	bl coloured_LED_init
 	bl red_led_on

arch/arm/cpu/armv7/config.mk

@@ -26,6 +26,8 @@ PLATFORM_RELFLAGS += -fno-common -ffixed-r8 -msoft-float
 # supported by more tool-chains
 PF_CPPFLAGS_ARMV7 := $(call cc-option, -march=armv7-a, -march=armv5)
 PLATFORM_CPPFLAGS += $(PF_CPPFLAGS_ARMV7)
+PF_CPPFLAGS_NO_UNALIGNED := $(call cc-option, -mno-unaligned-access,)
+PLATFORM_CPPFLAGS += $(PF_CPPFLAGS_NO_UNALIGNED)
 
 # =========================================================================
 #

arch/arm/cpu/armv7/start.S

@@ -259,10 +259,12 @@ clear_bss:
 #endif
 	mov	r2, #0x00000000		/* clear			    */
 
-clbss_l:str	r2, [r0]		/* clear loop...		    */
+clbss_l:cmp	r0, r1			/* clear loop... */
+	bhs	clbss_e			/* if reached end of bss, exit */
+	str	r2, [r0]
 	add	r0, r0, #4
-	cmp	r0, r1
-	bne	clbss_l
+	b	clbss_l
+clbss_e:
 
 /*
  * We are done. Do not return, instead branch to second part of board

arch/arm/cpu/ixp/start.S

@@ -334,10 +334,12 @@ clear_bss:
 	add	r1, r1, r4
 	mov	r2, #0x00000000		/* clear			    */
 
-clbss_l:str	r2, [r0]		/* clear loop...		    */
+clbss_l:cmp	r0, r1			/* clear loop... */
+	bhs	clbss_e			/* if reached end of bss, exit */
+	str	r2, [r0]
 	add	r0, r0, #4
-	cmp	r0, r1
-	bne	clbss_l
+	b	clbss_l
+clbss_e:
 
 	bl coloured_LED_init
 	bl red_led_on

arch/arm/cpu/lh7a40x/start.S

@@ -245,10 +245,12 @@ clear_bss:
 	add	r1, r1, r4
 	mov	r2, #0x00000000		/* clear			    */
 
-clbss_l:str	r2, [r0]		/* clear loop...		    */
+clbss_l:cmp	r0, r1			/* clear loop... */
+	bhs	clbss_e			/* if reached end of bss, exit */
+	str	r2, [r0]
 	add	r0, r0, #4
-	cmp	r0, r1
-	bne	clbss_l
+	b	clbss_l
+clbss_e:
 #endif
 
 /*

arch/arm/cpu/pxa/start.S

@@ -258,10 +258,12 @@ clear_bss:
 	add	r1, r1, r4
 	mov	r2, #0x00000000		/* clear			    */
 
-clbss_l:str	r2, [r0]		/* clear loop...		    */
+clbss_l:cmp	r0, r1			/* clear loop... */
+	bhs	clbss_e			/* if reached end of bss, exit */
+	str	r2, [r0]
 	add	r0, r0, #4
-	cmp	r0, r1
-	bne	clbss_l
+	b	clbss_l
+clbss_e:
 #endif	/* #ifndef CONFIG_SPL_BUILD */
 
 /*

arch/arm/cpu/s3c44b0/start.S

@@ -217,10 +217,12 @@ clear_bss:
 	add	r1, r1, r4
 	mov	r2, #0x00000000		/* clear			    */
 
-clbss_l:str	r2, [r0]		/* clear loop...		    */
+clbss_l:cmp	r0, r1			/* clear loop... */
+	bhs	clbss_e			/* if reached end of bss, exit */
+	str	r2, [r0]
 	add	r0, r0, #4
-	cmp	r0, r1
-	bne	clbss_l
+	b	clbss_l
+clbss_e:
 
 	bl coloured_LED_init
 	bl red_led_on

arch/arm/cpu/sa1100/start.S

@@ -221,10 +221,12 @@ clear_bss:
 	add	r1, r1, r4
 	mov	r2, #0x00000000		/* clear			    */
 
-clbss_l:str	r2, [r0]		/* clear loop...		    */
+clbss_l:cmp	r0, r1			/* clear loop... */
+	bhs	clbss_e			/* if reached end of bss, exit */
+	str	r2, [r0]
 	add	r0, r0, #4
-	cmp	r0, r1
-	bne	clbss_l
+	b	clbss_l
+clbss_e:
 #endif
 
 /*

arch/arm/lib/board.c

@@ -224,10 +224,16 @@ void __dram_init_banksize(void)
 void dram_init_banksize(void)
 	__attribute__((weak, alias("__dram_init_banksize")));
 
+int __arch_cpu_init(void)
+{
+	return 0;
+}
+int arch_cpu_init(void)
+	__attribute__((weak, alias("__arch_cpu_init")));
+
 init_fnc_t *init_sequence[] = {
-#if defined(CONFIG_ARCH_CPU_INIT)
 	arch_cpu_init,		/* basic arch cpu dependent setup */
-#endif
+
 #if defined(CONFIG_BOARD_EARLY_INIT_F)
 	board_early_init_f,
 #endif

board/ti/panda/panda_mux_data.h

@@ -62,7 +62,26 @@ const struct pad_conf_entry core_padconf_array_essential[] = {
 {UART3_CTS_RCTX, (PTU | IEN | M0)},			/* uart3_tx */
 {UART3_RTS_SD, (M0)},					/* uart3_rts_sd */
 {UART3_RX_IRRX, (IEN | M0)},				/* uart3_rx */
-{UART3_TX_IRTX, (M0)}					/* uart3_tx */
+{UART3_TX_IRTX, (M0)},					/* uart3_tx */
+{USBB1_ULPITLL_CLK, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M4)},/* usbb1_ulpiphy_clk */
+{USBB1_ULPITLL_STP, (OFF_EN | OFF_OUT_PTD | M4)},		/* usbb1_ulpiphy_stp */
+{USBB1_ULPITLL_DIR, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)},	/* usbb1_ulpiphy_dir */
+{USBB1_ULPITLL_NXT, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)},	/* usbb1_ulpiphy_nxt */
+{USBB1_ULPITLL_DAT0, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)},	/* usbb1_ulpiphy_dat0 */
+{USBB1_ULPITLL_DAT1, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)},	/* usbb1_ulpiphy_dat1 */
+{USBB1_ULPITLL_DAT2, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)},	/* usbb1_ulpiphy_dat2 */
+{USBB1_ULPITLL_DAT3, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)},	/* usbb1_ulpiphy_dat3 */
+{USBB1_ULPITLL_DAT4, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)},	/* usbb1_ulpiphy_dat4 */
+{USBB1_ULPITLL_DAT5, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)},	/* usbb1_ulpiphy_dat5 */
+{USBB1_ULPITLL_DAT6, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)},	/* usbb1_ulpiphy_dat6 */
+{USBB1_ULPITLL_DAT7, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)},	/* usbb1_ulpiphy_dat7 */
+{USBB1_HSIC_DATA, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)},	/* usbb1_hsic_data */
+{USBB1_HSIC_STROBE, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)},	/* usbb1_hsic_strobe */
+{USBC1_ICUSB_DP, (IEN | M0)},					/* usbc1_icusb_dp */
+{USBC1_ICUSB_DM, (IEN | M0)},					/* usbc1_icusb_dm */
+{UNIPRO_TY2, (PTU | IEN | M3)},					/* gpio_1 */
+{GPMC_WAIT1,  (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M3)},	/* gpio_62 */
+{FREF_CLK2_OUT, (PTU | IEN | M3)},				/* gpio_182 */
 
 };
 
@@ -70,7 +89,8 @@ const struct pad_conf_entry wkup_padconf_array_essential[] = {
 
 {PAD1_SR_SCL, (PTU | IEN | M0)}, /* sr_scl */
 {PAD0_SR_SDA, (PTU | IEN | M0)}, /* sr_sda */
-{PAD1_SYS_32K, (IEN | M0)}	 /* sys_32k */
+{PAD1_SYS_32K, (IEN | M0)},	 /* sys_32k */
+{PAD0_FREF_CLK3_OUT, (M0)}, /* fref_clk3_out */
 
 };
 
@@ -109,7 +129,6 @@ const struct pad_conf_entry core_padconf_array_non_essential[] = {
 	{GPMC_NBE0_CLE, (M3)},						/* gpio_59 */
 	{GPMC_NBE1, (PTD | M3)},					/* gpio_60 */
 	{GPMC_WAIT0, (PTU | IEN | M3)},					/* gpio_61 */
-	{GPMC_WAIT1,  (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M3)},	/* gpio_62 */
 	{C2C_DATA11, (PTD | M3)},					/* gpio_100 */
 	{C2C_DATA12, (PTU | IEN | M3)},					/* gpio_101 */
 	{C2C_DATA13, (PTD | M3)},					/* gpio_102 */
@@ -136,22 +155,6 @@ const struct pad_conf_entry core_padconf_array_non_essential[] = {
 	{CAM_SHUTTER, (OFF_EN | OFF_PD | OFF_OUT_PTD | M0)},		/* cam_shutter */
 	{CAM_STROBE, (OFF_EN | OFF_PD | OFF_OUT_PTD | M0)},		/* cam_strobe */
 	{CAM_GLOBALRESET, (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M3)},	/* gpio_83 */
-	{USBB1_ULPITLL_CLK, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M4)},/* usbb1_ulpiphy_clk */
-	{USBB1_ULPITLL_STP, (OFF_EN | OFF_OUT_PTD | M4)},		/* usbb1_ulpiphy_stp */
-	{USBB1_ULPITLL_DIR, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)},	/* usbb1_ulpiphy_dir */
-	{USBB1_ULPITLL_NXT, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)},	/* usbb1_ulpiphy_nxt */
-	{USBB1_ULPITLL_DAT0, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)},	/* usbb1_ulpiphy_dat0 */
-	{USBB1_ULPITLL_DAT1, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)},	/* usbb1_ulpiphy_dat1 */
-	{USBB1_ULPITLL_DAT2, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)},	/* usbb1_ulpiphy_dat2 */
-	{USBB1_ULPITLL_DAT3, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)},	/* usbb1_ulpiphy_dat3 */
-	{USBB1_ULPITLL_DAT4, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)},	/* usbb1_ulpiphy_dat4 */
-	{USBB1_ULPITLL_DAT5, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)},	/* usbb1_ulpiphy_dat5 */
-	{USBB1_ULPITLL_DAT6, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)},	/* usbb1_ulpiphy_dat6 */
-	{USBB1_ULPITLL_DAT7, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)},	/* usbb1_ulpiphy_dat7 */
-	{USBB1_HSIC_DATA, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)},	/* usbb1_hsic_data */
-	{USBB1_HSIC_STROBE, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)},	/* usbb1_hsic_strobe */
-	{USBC1_ICUSB_DP, (IEN | M0)},					/* usbc1_icusb_dp */
-	{USBC1_ICUSB_DM, (IEN | M0)},					/* usbc1_icusb_dm */
 	{ABE_MCBSP2_DR, (IEN | OFF_EN | OFF_OUT_PTD | M0)},		/* abe_mcbsp2_dr */
 	{ABE_MCBSP2_DX, (OFF_EN | OFF_OUT_PTD | M0)},			/* abe_mcbsp2_dx */
 	{ABE_MCBSP2_FSX, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)},	/* abe_mcbsp2_fsx */
@@ -211,7 +214,6 @@ const struct pad_conf_entry core_padconf_array_non_essential[] = {
 	{UNIPRO_TX1, (OFF_EN | OFF_PD | OFF_IN | M1)},			/* kpd_col2 */
 	{UNIPRO_TY1, (OFF_EN | OFF_PD | OFF_IN | M1)},			/* kpd_col3 */
 	{UNIPRO_TX2, (PTU | IEN | M3)},					/* gpio_0 */
-	{UNIPRO_TY2, (PTU | IEN | M3)},					/* gpio_1 */
 	{UNIPRO_RX0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)},	/* kpd_row0 */
 	{UNIPRO_RY0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)},	/* kpd_row1 */
 	{UNIPRO_RX1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)},	/* kpd_row2 */
@@ -222,7 +224,6 @@ const struct pad_conf_entry core_padconf_array_non_essential[] = {
 	{USBA0_OTG_DP, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)},		/* usba0_otg_dp */
 	{USBA0_OTG_DM, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)},		/* usba0_otg_dm */
 	{FREF_CLK1_OUT, (M0)},						/* fref_clk1_out */
-	{FREF_CLK2_OUT, (PTU | IEN | M3)},				/* gpio_182 */
 	{SYS_NIRQ1, (PTU | IEN | M0)},					/* sys_nirq1 */
 	{SYS_NIRQ2, (PTU | IEN | M0)},					/* sys_nirq2 */
 	{SYS_BOOT0, (PTU | IEN | M3)},					/* gpio_184 */
@@ -272,7 +273,6 @@ const struct pad_conf_entry wkup_padconf_array_non_essential[] = {
 	{PAD1_FREF_CLK_IOREQ, (M0)},		/* fref_clk_ioreq */
 	{PAD0_FREF_CLK0_OUT, (M2)},		/* sys_drm_msecure */
 	{PAD1_FREF_CLK3_REQ, M7},		/* safe mode */
-	{PAD0_FREF_CLK3_OUT, (M0)},		/* fref_clk3_out */
 	{PAD0_FREF_CLK4_OUT, (PTU | M3)},	/* led status_2 */
 	{PAD0_SYS_NRESPWRON, (M0)},		/* sys_nrespwron */
 	{PAD1_SYS_NRESWARM, (M0)},		/* sys_nreswarm */