Merge branch 'master' into u-boot-5329-early

CHANGELOG

@@ -1,3 +1,359 @@
+commit f1152f8c28db4a22087c21c618a3f7baa48e9a4f
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Fri Jul 6 02:50:19 2007 +0200
+
+    Code cleanup and default config update for STC GP3 SSA board.
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit b44896215a09c60fa40cae906f7ed207bbc2c492
+Author: Sergei Poselenov <sposelenov@emcraft.com>
+Date:	Thu Jul 5 08:17:37 2007 +0200
+
+    Merged POST framework with the current TOT.
+
+    Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
+
+commit f780b83316d9af1f61d71cc88b1917b387b9b995
+Author: Niklaus Giger <niklausgiger@gmx.ch>
+Date:	Wed Jun 27 18:11:38 2007 +0200
+
+    resubmit: ppc4xx: Remove sequoia/sequioa.h. Cleanup ppc440.h for PPC440EPX
+
+    Signed-off-by: Niklaus Giger <niklaus.giger@nestal.com>
+
+commit 04e6c38b766eaa2f3287561563c9e215e0c3a0d4
+Author: Stefan Roese <sr@denx.de>
+Date:	Wed Jul 4 10:06:30 2007 +0200
+
+    ppc4xx: Update lwmon5 board
+
+    - Add optional ECC generation routine to preserve existing
+      RAM values. This is needed for the Linux log-buffer support
+    - Add optional DDR2 setup with CL=4
+    - GPIO50 not used anymore
+    - Lime register setup added
+
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 1f2a05898658900dc5717761e27abf2052e67e13
+Author: Mushtaq Khan <mushtaqk_921@yahoo.co.in>
+Date:	Sat Jun 30 18:50:48 2007 +0200
+
+    Fix S-ATA support.
+
+    Signed-off-by: mushtaq khan <mushtaqk_921@yahoo.co.in>
+
+commit a5d71e290f3673269be8eefb4ec44f53412f9461
+Author: Heiko Schocher <hs@pollux.denx.de>
+Date:	Mon Jun 25 19:11:37 2007 +0200
+
+    [PCS440EP]	get rid of CONFIG_PPC4xx_USE_SPD_DDR_INIT_HANG
+
+    Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit a1bd6200eccd3a02040a955d5f43d3ee1fc9f93b
+Author: Niklaus Giger <niklaus.giger@nestal.com>
+Date:	Mon Jun 25 17:03:13 2007 +0200
+
+    ppc4xx: PPC440EPx Emit DDR0 registers on machine check interrupt
+
+    This patch prints the DDR status registers upon machine check
+    interrupt on the 440EPx/GRx. This can be useful especially when
+    ECC support is enabled.
+
+    I added some small changes to the original patch from Niklaus to
+    make it compile clean.
+
+    Signed-off-by: Niklaus Giger <niklaus.giger@nestal.com>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 807018fb7faceb429ce0cb47baa2073746b33a4e
+Author: Niklaus Giger <niklaus.giger@nestal.com>
+Date:	Mon Jun 25 16:50:55 2007 +0200
+
+    ppc4xx: Fix O=buildir builds
+
+    This patch fixes the problem to assemble cpu/ppc4xx/start.S
+    experienced last week where building failed having specified
+    O=../build.sequoia.
+
+    Signed-off-by: Niklaus Giger <niklaus.giger@nestal.com>
+
+commit 466fff1a7bb5fe764a06450626f6098219f446b8
+Author: Stefan Roese <sr@denx.de>
+Date:	Mon Jun 25 15:57:39 2007 +0200
+
+    ppc4xx: Add pci_pre_init() for 405 boards
+
+    This patch removes the CFG_PCI_PRE_INIT option completely, since
+    it's not needed anymore with the patch from Matthias Fuchs with
+    the "weak" pci_pre_init() implementation.
+
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 6f35c53166213c24a5a0e2390ed861136ff73870
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date:	Sun Jun 24 17:41:21 2007 +0200
+
+    ppc4xx: Maintenance patch for esd's CPCI405 derivats
+
+    -add pci_pre_init() for pci interrupt fixup code
+    -disable phy sleep mode via reset_phy() function
+    -use correct io accessors
+    -cleanup
+
+    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit 5a1c9ff0c44305b57cb4d8f9369bba90bcf0e1f8
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date:	Sun Jun 24 17:23:41 2007 +0200
+
+    ppc4xx: Add pci_pre_init() for 405 boards
+
+    This patch adds support for calling a plattform dependant
+    pci_pre_init() function for 405 boards. This can be used to
+    move the current pci_405gp_fixup_irq() function into the
+    board code.
+
+    This patch also makes the CFG_PCI_PRE_INIT define obsolete.
+    A default function with 'weak' attribute is used when
+    a board specific pci_pre_init() is not implemented.
+
+    Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit 1636d1c8529c006d106287cfbc20cd0a246fe1cb
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Fri Jun 22 23:59:00 2007 +0200
+
+    Coding stylke cleanup; rebuild CHANGELOG
+
+commit 2dc64451b4c08ffd619372abfdc2506a2e2363b9
+Author: Igor Lisitsin <igor@emcraft.com>
+Date:	Wed Apr 18 14:55:19 2007 +0400
+
+    Adapt log buffer code to support Linux 2.6
+
+    A new environment variable, "logversion", selects the log buffer
+    behaviour. If it is not set or set to a value other than 2, then the
+    old, Linux 2.4.4, behaviour is selected.
+
+    Signed-off-by: Igor Lisitsin <igor@emcraft.com>
+    --
+
+commit a11e06965ec91270c51853407ff1261d3c740386
+Author: Igor Lisitsin <igor@emcraft.com>
+Date:	Wed Mar 28 19:06:19 2007 +0400
+
+    Extend POST support for PPC440
+
+    Added memory, CPU, UART, I2C and SPR POST tests for PPC440.
+
+    Signed-off-by: Igor Lisitsin <igor@emcraft.com>
+    --
+
+commit 566a494f592ae3b3c0785d90d4e1ba45574880c4
+Author: Heiko Schocher <hs@pollux.denx.de>
+Date:	Fri Jun 22 19:11:54 2007 +0200
+
+    [PCS440EP]	    upgrade the PCS440EP board:
+		    - Show on the Status LEDs, some States of the board.
+		    - Get the MAC addresses from the EEProm
+		    - use PREBOOT
+		    - use the CF on the board.
+		    - check the U-Boot image in the Flash with a SHA1
+		      checksum.
+		    - use dynamic TLB entries generation for the SDRAM
+
+    Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 3a1f5c81b0b9557817a789bece839905581c2205
+Author: Stefan Roese <sr@denx.de>
+Date:	Fri Jun 22 16:58:40 2007 +0200
+
+    ppc4xx: Fix problem with extended program_tlb() funtion
+
+    The recently extended program_tlb() function had a problem when
+    multiple TLB's had to be setup (for example with 512MB of SDRAM). The
+    virtual address was not incremented. This patch fixes this issue
+    and is tested on Katmai with 512MB SDRAM.
+
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 02032e8f14751a1a751b09240a4f1cf9f8a2077f
+Author: Rafal Jaworowski <raj@semihalf.com>
+Date:	Fri Jun 22 14:58:04 2007 +0200
+
+    [ppc] Fix build breakage for all non-4xx PowerPC variants.
+
+    - adapt to the more generic EXCEPTION_PROLOG and CRIT_EXCEPTION macros
+    - minor 4xx cleanup
+
+commit 83b4cfa3d629dff0264366263c5e94d9a50ad80b
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Wed Jun 20 18:14:24 2007 +0200
+
+    Coding style cleanup. Refresh CHANGELOG.
+
+commit b3f9ec86e388207fd03dcdf7b145b9ed080bf024
+Author: Stefan Roese <sr@denx.de>
+Date:	Tue Jun 19 17:22:44 2007 +0200
+
+    ppc4xx: Add bootstrap command for AMCC Sequoia (440EPx) eval board
+
+    This patch adds a board command to configure the I2C bootstrap EEPROM
+    values. Right now 533 and 667MHz are supported for booting either via NOR
+    or NAND FLASH. Here the usage:
+
+    => bootstrap 533 nor	;to configure the board for 533MHz NOR booting
+    => bootstrap 667 nand	;to configure the board for 667MHz NNAND booting
+
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit df8a24cdd30151505cf57bbee5289e91bf53bd1b
+Author: Stefan Roese <sr@denx.de>
+Date:	Tue Jun 19 16:42:31 2007 +0200
+
+    [ppc4xx] Fix problem with NAND booting on AMCC Acadia
+
+    The latest changes showed a problem with the location of the NAND-SPL
+    image in the OCM and the init-data area (incl. cache). This patch
+    fixes this problem.
+
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 86ba99e34194394052d24c04dc40d1263d29a26f
+Author: Stefan Roese <sr@denx.de>
+Date:	Tue Jun 19 16:40:58 2007 +0200
+
+    [ppc4xx] Change board/amcc/acadia/cpr.c to pll.c
+
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit e73846b7cf1e29ae635bf9bb5570269663df2ee5
+Author: Stefan Roese <sr@denx.de>
+Date:	Fri Jun 15 11:33:41 2007 +0200
+
+    [ppc4xx] Change lwmon5 port to work with recent 440 exception rework
+
+    Now CONFIG_440 has to be defined in all PPC440 board config files.
+
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit efa35cf12d914d4caba942acd5a6c45f217de302
+Author: Grzegorz Bernacki <gjb@semihalf.com>
+Date:	Fri Jun 15 11:19:28 2007 +0200
+
+    ppc4xx: Clean up 440 exceptions handling
+
+    - Introduced dedicated switches for building 440 and 405 images required
+      for 440-specific machine instructions like 'rfmci' etc.
+
+    - Exception vectors moved to the proper location (_start moved away from
+      the critical exception handler space, which it occupied)
+
+    - CriticalInput now serviced (with default handler)
+
+    - MachineCheck properly serviced (added a dedicated handler and return
+      subroutine)
+
+    - Overall cleanup of exceptions declared with STD_EXCEPTION macro (unused,
+      unhandled and those not relevant for 4xx were eliminated)
+
+    - Eliminated Linux leftovers, removed dead code
+
+    Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
+    Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit b765ffb773f5a3cd5aa94ec76b6a05276b8cd5b2
+Author: Stefan Roese <sr@denx.de>
+Date:	Fri Jun 15 08:18:01 2007 +0200
+
+    [ppc4xx] Add initial lwmon5 board support
+
+    This patch adds initial support for the Liebherr lwmon5 board euqipped
+    with an AMCC 440EPx PowerPC.
+
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 85f737376d5ff3d5f0d45a8b657686326d175307
+Author: Stefan Roese <sr@denx.de>
+Date:	Fri Jun 15 07:39:43 2007 +0200
+
+    [ppc4xx] Extend 44x GPIO setup with default output state
+
+    The board config array CFG_440_GPIO_TABLE for the ppc440 GPIO setup
+    is extended with the default GPIO output state (level).
+
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit dbca208518e5e7f01a6420588d1cd6e60db74c2b
+Author: Stefan Roese <sr@denx.de>
+Date:	Thu Jun 14 11:14:32 2007 +0200
+
+    [ppc4xx] Extend program_tlb() with virtual & physical addresses
+
+    Now program_tlb() allows to program a TLB (or multiple) with
+    different virtual and physical addresses. With this change, now one
+    physical region (e.g. SDRAM) can be mapped 2 times, once with caches
+    diabled and once with caches enabled.
+
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 9912121f7ed804ea58fd62f3f230b5dcfc357d88
+Author: Detlev Zundel <dzu@denx.de>
+Date:	Wed May 23 19:02:41 2007 +0200
+
+    Change 'repeatable' attribute of some commands to sensible values.
+
+    Most prominently this changes 'erase' to be non-repeatable.
+
+    Signed-off-by: Detlev Zundel <dzu@denx.de>
+
+commit 5afb202093f6a001797db92cf695b93a70ea9ab4
+Author: Detlev Zundel <dzu@denx.de>
+Date:	Wed May 23 18:47:48 2007 +0200
+
+    Fix 'run' not to continue after interrupted command
+
+    Signed-off-by: Detlev Zundel <dzu@denx.de>
+
+commit 8f8416fada9faf94b9a92f21fe6000643cb521d5
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date:	Fri Jun 8 14:52:22 2007 +0200
+
+    TQM5200: Add Flat Device Tree support, update default env. accordingly.
+
+    Signed-off-by: Jan Wrobel <wrr@semihalf.com>
+    Acked-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit 9045f33c023f698660a2e45d1b2194c0711abebc
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Fri Jun 8 10:24:58 2007 +0200
+
+    Fix config problems on SC3 board; make ide_reset_timeout work.
+
+commit fba3fb0449b8a54542aed1e729de76e7f5a2ff1b
+Author: Benoît Monin <bmonin@adeneo.eu>
+Date:	Fri Jun 8 09:55:24 2007 +0200
+
+    [PATCH] fix gpio setting when using CFG_440_GPIO_TABLE
+
+    Set the correct value in GPIOx_TCR when configuring the gpio
+    with CFG_440_GPIO_TABLE.
+
+    Signed-off-by: Benoit Monin <bmonin@adeneo.eu>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 725671ccd2cd04c9ebc50c9e5a94dd8cbade66b7
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Wed Jun 6 16:26:56 2007 +0200
+
+    Coding Style cleanup; generate new CHANGELOG file.
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
 commit c440bfe6d6d92d66478a7e84402b31f48413617b
 Author: Stefan Roese <sr@denx.de>
 Date:	Wed Jun 6 11:42:13 2007 +0200
@@ -328,6 +684,14 @@ Date:	Thu May 24 08:22:09 2007 +0200
 
     Signed-off-by: Stefan Roese <sr@denx.de>
 
+commit 822d55365bb557e084d0e33625a6dedcc866110b
+Author: Jon Loeliger <jdl@freescale.com>
+Date:	Wed May 23 14:09:46 2007 -0500
+
+    Add LIST_86xx MAKEALL target for PowerPC builds.
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
 commit 9f0077abd69f7a7c756a915b961037302be3e6f2
 Author: Stefan Roese <sr@denx.de>
 Date:	Tue May 22 12:48:09 2007 +0200
@@ -376,6 +740,17 @@ Date:	Fri May 18 14:33:11 2007 +0100
 
     Makefile permissions
 
+commit 255a3577c848706441daee0174543efe205a77f8
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date:	Wed May 16 16:52:19 2007 -0500
+
+    Reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx
+
+    For all practical u-boot purposes, TSECs don't differ throughout the
+    mpc8[356]xx families; reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx.
+
+    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
 commit 70124c2602ae2d4c5d3dba05b482d91548242de8
 Author: Stefano Babic <sbabic@denx.de>
 Date:	Wed May 16 14:49:12 2007 +0200
@@ -417,6 +792,109 @@ Date:	Wed May 16 00:13:33 2007 +0200
 
     Coding Style Cleanup, new CHANGELOG
 
+commit 3162eb836903c8b247fdc7470dd39bfa6996f495
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Tue May 15 23:38:05 2007 +0200
+
+    Minor coding style cleanup.
+
+commit 66d9dbec1cc27d6398ee6cf84639dbe14971251e
+Author: mushtaq khan <mushtaq_k@procsys.com>
+Date:	Fri Apr 20 14:23:02 2007 +0530
+
+    Add driver for S-ATA-controller on Intel processors with South
+    Bridge, ICH-5, ICH-6 and ICH-7.
+
+    Implementation:
+
+    1. Code is divided in to two files. All functions, which are
+       controller specific are kept in "drivers/ata_piix.c" file and
+       functions, which are not controller specific, are kept in
+       "common/cmd_sata.c" file.
+
+    2. Reading and Writing from the S-ATA drive is done using PIO method.
+
+    3. Driver can be configured for 48-bit addressing by defining macro
+       CONFIG_LBA48, if this macro is not defined driver uses the 28-bit
+       addressing.
+
+    4. S-ATA read function is hooked to the File system, commands like
+       ext2ls and ext2load file can be used. This has been tested.
+
+    5. U-Boot command "SATA_init" is added, which initializes the S-ATA
+       controller and identifies the S-ATA drives connected to it.
+
+    6. U-Boot command "sata" is added, which is used to read/write, print
+       partition table and get info about the drives present. This I have
+       implemented in same way as "ide" command is implemented in U-Boot.
+
+    7. This driver is for S-ATA in native mode.
+
+    8. This driver does not support the Native command queuing and
+       Hot-plugging.
+
+    Signed-off-by: Mushtaq Khan <mushtaq_k@procsys.com>
+
+commit 644e6fb4eb8be90ea04ba34b643a8bf019d680e0
+Author: mushtaq khan <mushtaq_k@procsys.com>
+Date:	Mon Apr 30 15:57:22 2007 +0530
+
+    Fixes bug clearing the bss section for i386
+
+    Hi,
+    There is a bug in the code of clearing the bss section for processor
+    i386.(File: cpu/i386/start.S)
+    In the code, bss_start addr (starting addr of bss section) is put into
+    the register %eax, but the code which clears the bss section refers to
+    the addr pointed by %edi.
+
+    This patch fixes this bug by putting bss_start into %edi register.
+
+    Signed-off-by: Mushtaq Khan <mushtaq_k@procsys.com>
+
+commit c3243cf7b490057277d61acffe4ad0946f9eb4a4
+Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
+Date:	Mon Apr 30 16:47:28 2007 -0500
+
+    Add support for BCM5464 Quad Phy
+
+    Added support for Broadcom's BCM5464 Quad Phy
+
+    Signed-off-by: Joe Hamman <joe.hamman@embeddedspecialties.com>
+
+commit 1b305bdc754c8468e1d5d858f5dcf8a7a0a4bb7a
+Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
+Date:	Wed May 9 08:10:57 2007 +0800
+
+    Search the exception table with linear algorithm
+
+    Search the exception table with linear algorithm instead of
+    bisecting algorithm.
+    Because the exception table might be unsorted.
+
+    Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
+
+commit 5dfaa50eb819686bfba1927e8c5b8a70a4d65fd3
+Author: Aubrey.Li <aubrey.adi@gmail.com>
+Date:	Mon May 14 11:47:35 2007 +0800
+
+    Fix compilation issues on MACOSX
+
+    Singed-off-by: Marc Hoffman <Marc.Hoffman@analog.com>
+    Signed-off-by: Aubrey Li <aubrey.adi@gmail.com>
+
+commit 56fd7162985c412317bbf763a225fba23c64fd31
+Author: Stephen Williams <steve@icarus.com>
+Date:	Tue May 15 07:55:42 2007 -0700
+
+    Fix for compile of JSE target
+
+    The attached patch fixes the compile of the JSE board in the
+    denx git as of 14 may 2007. It is an extremely simple patch,
+    it just adds the missing define of CFG_SYSTEMACE_WIDTH.
+
+     Fix to compile JSE against 20070514 git of u-boot
+
 commit 61936667e86a250ae12fd2dc189d3588f0a59e0b
 Author: Stefan Roese <sr@denx.de>
 Date:	Fri May 11 12:01:49 2007 +0200
@@ -756,6 +1234,20 @@ Date:	Sat May 5 08:29:01 2007 +0200
 
     Signed-off-by: Stefan Roese <sr@denx.de>
 
+commit 2f550ab976405300f5b07bf2890800840d0aa05f
+Author: Timur Tabi <timur@freescale.com>
+Date:	Sat May 5 08:12:30 2007 +0200
+
+    5xxx: write MAC address to mac-address and local-mac-address
+
+    Some device trees have a mac-address property, some have local-mac-address,
+    and some have both.  To support all of these device trees, ftp_cpu_setup()
+    should write the MAC address to mac-address and local-mac-address, if they
+    exist.
+
+    Signed-off-by: Timur Tabi <timur@freescale.com>
+    Acked-by: Grant Likely <grant.likely@secretlab.ca>
+
 commit a79886590593ba1d667c840caa4940c61639f18f
 Author: Thomas Knobloch <knobloch@siemens.com>
 Date:	Sat May 5 07:04:42 2007 +0200
@@ -919,12 +1411,35 @@ Date:	Sun Apr 29 14:13:01 2007 +0200
 
     Signed-off-by: Stefan Roese <sr@denx.de>
 
+commit 864aa6a6a466fcb92bf32b1d7dba79cd709b52c9
+Author: Grzegorz Wianecki <grzegorz.wianecki@gmail.com>
+Date:	Sun Apr 29 14:01:54 2007 +0200
+
+    [PATCH] Use PVR to distinguish MPC5200B from MPC5200 in boot message
+
+    MPC5200B systems are incorrectly reported as MPC5200 in U-Boot start-up
+    message. Use PVR to distinguish between the two variants, and print proper CPU
+    information.
+
+    Signed-off-by: Grzegorz Wianecki <grzegorz.wianecki@gmail.com>
+    Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+    Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
 commit 5c5d3242935cf3543af01142627494434834cf98
 Author: Kim Phillips <kim.phillips@freescale.com>
 Date:	Wed Apr 25 12:34:38 2007 -0500
 
     mpc83xx: minor fixups for 8313rdb introduction
 
+commit ada4d40091f6ed4a4f0040e08d20db21967e4a67
+Author: Ladislav Michl <ladis@linux-mips.org>
+Date:	Wed Apr 25 16:01:26 2007 +0200
+
+    [PATCH] simplify silent console
+
+    Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
+    Acked-by: Stefan Roese <sr@denx.de>
+
 commit 144876a380f5756f57412caf74c1d6dc201dd796
 Author: Michal Simek <monstr@monstr.eu>
 Date:	Tue Apr 24 23:01:02 2007 +0200
@@ -1221,6 +1736,58 @@ Date:	Mon Apr 16 14:31:55 2007 -0500
 
     Signed-off-by: Scott Wood <scottwood@freescale.com>
 
+commit 7fc4c71a143be8666d70803fb25ae60379c95622
+Author: Stefan Roese <sr@denx.de>
+Date:	Mon Apr 23 15:39:59 2007 +0200
+
+    Fix file mode
+
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 38257988abfe74d459ca2ad748b109ca04e4efe1
+Author: Sergei Shtylyov <sshtylyov@ru.mvista.com>
+Date:	Mon Apr 23 15:30:39 2007 +0200
+
+    [PATCH] Avoid assigning PCI resources from zero address
+
+    If a PCI IDE card happens to get a zero address assigned to it, the Linux IDE
+    core complains and IDE drivers fails to work.  Also, assigning zero to a BAR
+    was illegal according to PCI 2.1 (the later revisions seem to have excluded the
+    sentence about "0" being considered an invalid address) -- so, use a reasonable
+    starting value of 0x1000 (that's what the most Linux archs are using).
+
+    Alternatively, one might have fixed the calls to pci_set_region() individually
+    (some code even seems to have taken care of this issue) but that would have
+    been a lot more work. :-)
+
+    Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
+    Acked-by: Stefan Roese <sr@denx.de>
+
+commit afb903a2eb9436baa9270ccc0c27082d86497d89
+Author: Jeffrey Mann <mannj@embeddedplanet.com>
+Date:	Mon Apr 23 14:00:11 2007 +0200
+
+    [patch] setenv(...) can delete environmentalvariables
+
+    update setenv() function so that entering a NULL value for the
+    variable's value will delete the environmental variable
+
+    Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
+    Acked-by: Stefan Roese <sr@denx.de>
+
+commit 36f104e5caa747d568eff26b369565af57c2ffa6
+Author: Mike Frysinger <vapier@gentoo.org>
+Date:	Mon Apr 23 13:54:24 2007 +0200
+
+    [patch] use unsigned char in smc91111 driver for mac
+
+    the v_mac variable in the smc91111 driver is declared as a signed char ...
+    this causes problems when one of the bytes in the MAC is "signed" like 0xE0
+    because when it gets printed out, you get a display like:
+    0xFFFFFFE0 and that's no good
+
+    Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
 commit 323bfa8f436dc3bc57187c9b1488bc3146ff1522
 Author: Stefan Roese <sr@denx.de>
 Date:	Mon Apr 23 12:00:22 2007 +0200

MAINTAINERS

@@ -282,6 +282,7 @@ Stefan Roese <sr@denx.de>
 	bunbinga		PPC405EP
 	ebony			PPC440GP
 	katmai			PPC440SPe
+	lwmon5			PPC440EPx
 	ocotea			PPC440GX
 	p3p440			PPC440GP
 	pcs440ep		PPC440EP

MAKEALL

@@ -83,15 +83,15 @@ LIST_4xx="	\
 	csb272		csb472		DASA_SIM	DP405		\
 	DU405		ebony		ERIC		EXBITGEN	\
 	G2000		HH405		HUB405		JSE		\
-	KAREF		katmai		luan		METROBOX	\
-	MIP405		MIP405T		ML2		ml300		\
-	ocotea		OCRTC		ORSG		p3p440		\
-	PCI405		pcs440ep	PIP405		PLU405		\
-	PMC405		PPChameleonEVB	sbc405		sc3		\
-	sequoia		sequoia_nand	taishan		VOH405		\
-	VOM405		W7OLMC		W7OLMG		walnut		\
-	WUH405		XPEDITE1K	yellowstone	yosemite	\
-	yucca								\
+	KAREF		katmai		luan		lwmon5		\
+	METROBOX	MIP405		MIP405T		ML2		\
+	ml300		ocotea		OCRTC		ORSG		\
+	p3p440		PCI405		pcs440ep	PIP405		\
+	PLU405		PMC405		PPChameleonEVB	sbc405		\
+	sc3		sequoia		sequoia_nand	taishan		\
+	VOH405		VOM405		W7OLMC		W7OLMG		\
+	walnut		WUH405		XPEDITE1K	yellowstone	\
+	yosemite	yucca						\
 "
 
 #########################################################################
@@ -150,6 +150,14 @@ LIST_85xx="	\
 	TQM8560								\
 "
 
+#########################################################################
+## MPC86xx Systems
+#########################################################################
+
+LIST_86xx="	\
+    MPC8641HPCN	\
+"
+
 #########################################################################
 ## 74xx/7xx Systems
 #########################################################################
@@ -170,6 +178,7 @@ LIST_ppc="${LIST_5xx}  ${LIST_5xxx}		\
 	  ${LIST_8220} ${LIST_824x} ${LIST_8260} \
 	  ${LIST_83xx}				\
 	  ${LIST_85xx}				\
+	  ${LIST_86xx}				\
 	  ${LIST_4xx}				\
 	  ${LIST_74xx} ${LIST_7xx}"
 
@@ -356,7 +365,7 @@ do
 	microblaze| \
 	mips|mips_el| \
 	nios|nios2| \
-	ppc|5xx|5xxx|8xx|8220|824x|8260|83xx|85xx|4xx|7xx|74xx| \
+	ppc|5xx|5xxx|8xx|8220|824x|8260|83xx|85xx|86xx|4xx|7xx|74xx| \
 	x86|I486)
 			for target in `eval echo '$LIST_'${arg}`
 			do

Makefile

@@ -216,6 +216,8 @@ LIBS += drivers/sk98lin/libsk98lin.a
 LIBS += post/libpost.a post/drivers/libpostdrivers.a
 LIBS += $(shell if [ -d post/lib_$(ARCH) ]; then echo \
 	"post/lib_$(ARCH)/libpost$(ARCH).a"; fi)
+LIBS += $(shell if [ -d post/lib_$(ARCH)/fpu ]; then echo \
+	"post/lib_$(ARCH)/fpu/libpost$(ARCH)fpu.a"; fi)
 LIBS += $(shell if [ -d post/cpu/$(CPU) ]; then echo \
 	"post/cpu/$(CPU)/libpost$(CPU).a"; fi)
 LIBS += $(shell if [ -d post/board/$(BOARDDIR) ]; then echo \
@@ -247,7 +249,7 @@ __LIBS := $(subst $(obj),,$(LIBS))
 #########################################################################
 #########################################################################
 
-ALL = $(obj)u-boot.srec $(obj)u-boot.bin $(obj)System.map $(U_BOOT_NAND)
+ALL += $(obj)u-boot.srec $(obj)u-boot.bin $(obj)System.map $(U_BOOT_NAND)
 
 all:		$(ALL)
 
@@ -267,6 +269,9 @@ $(obj)u-boot.img:	$(obj)u-boot.bin
 			sed -e 's/"[	 ]*$$/ for $(BOARD) board"/') \
 		-d $< $@
 
+$(obj)u-boot.sha1:	$(obj)u-boot.bin
+		./tools/ubsha1 $(obj)u-boot.bin
+
 $(obj)u-boot.dis:	$(obj)u-boot
 		$(OBJDUMP) -d $< > $@
 
@@ -1141,6 +1146,9 @@ katmai_config:	unconfig
 luan_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx luan amcc
 
+lwmon5_config:	unconfig
+	@$(MKCONFIG) $(@:_config=) ppc ppc4xx lwmon5
+
 METROBOX_config: unconfig
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx metrobox sandburst
 
@@ -2469,7 +2477,7 @@ clean:
 	      $(obj)examples/smc91111_eeprom $(obj)examples/interrupt \
 	      $(obj)examples/test_burst
 	rm -f $(obj)tools/img2srec $(obj)tools/mkimage $(obj)tools/envcrc \
-		$(obj)tools/gen_eth_addr
+		$(obj)tools/gen_eth_addr $(obj)tools/ubsha1
 	rm -f $(obj)tools/mpc86x_clk $(obj)tools/ncb
 	rm -f $(obj)tools/easylogo/easylogo $(obj)tools/bmp_logo
 	rm -f $(obj)tools/gdb/astest $(obj)tools/gdb/gdbcont $(obj)tools/gdb/gdbsend
@@ -2492,7 +2500,7 @@ clobber:	clean
 	rm -f $(OBJS) $(obj)*.bak $(obj)ctags $(obj)etags $(obj)TAGS $(obj)include/version_autogenerated.h
 	rm -fr $(obj)*.*~
 	rm -f $(obj)u-boot $(obj)u-boot.map $(obj)u-boot.hex $(ALL)
-	rm -f $(obj)tools/crc32.c $(obj)tools/environment.c $(obj)tools/env/crc32.c
+	rm -f $(obj)tools/crc32.c $(obj)tools/environment.c $(obj)tools/env/crc32.c $(obj)tools/sha1.c
 	rm -f $(obj)tools/inca-swap-bytes $(obj)cpu/mpc824x/bedbug_603e.c
 	rm -f $(obj)include/asm/proc $(obj)include/asm/arch $(obj)include/asm
 	[ ! -d $(OBJTREE)/nand_spl ] || find $(obj)nand_spl -lname "*" -print | xargs rm -f

README

@@ -1704,28 +1704,69 @@ The following options need to be configured:
   -31	post/post.c		POST test failed, detected by post_output_backlog()
   -32	post/post.c		POST test failed, detected by post_run_single()
 
-   -1	common/cmd_doc.c	Bad usage of "doc" command
-   -1	common/cmd_doc.c	No boot device
-   -1	common/cmd_doc.c	Unknown Chip ID on boot device
-   -1	common/cmd_doc.c	Read Error on boot device
-   -1	common/cmd_doc.c	Image header has bad magic number
-
-   -1	common/cmd_ide.c	Bad usage of "ide" command
-   -1	common/cmd_ide.c	No boot device
-   -1	common/cmd_ide.c	Unknown boot device
-   -1	common/cmd_ide.c	Unknown partition table
-   -1	common/cmd_ide.c	Invalid partition type
-   -1	common/cmd_ide.c	Read Error on boot device
-   -1	common/cmd_ide.c	Image header has bad magic number
-
-   -1	common/cmd_nand.c	Bad usage of "nand" command
-   -1	common/cmd_nand.c	No boot device
-   -1	common/cmd_nand.c	Unknown Chip ID on boot device
-   -1	common/cmd_nand.c	Read Error on boot device
-   -1	common/cmd_nand.c	Image header has bad magic number
-
-   -1	common/env_common.c	Environment has a bad CRC, using default
-
+   34	common/cmd_doc.c	before loading a Image from a DOC device
+  -35	common/cmd_doc.c	Bad usage of "doc" command
+   35	common/cmd_doc.c	correct usage of "doc" command
+  -36	common/cmd_doc.c	No boot device
+   36	common/cmd_doc.c	correct boot device
+  -37	common/cmd_doc.c	Unknown Chip ID on boot device
+   37	common/cmd_doc.c	correct chip ID found, device available
+  -38	common/cmd_doc.c	Read Error on boot device
+   38	common/cmd_doc.c	reading Image header from DOC device OK
+  -39	common/cmd_doc.c	Image header has bad magic number
+   39	common/cmd_doc.c	Image header has correct magic number
+  -40	common/cmd_doc.c	Error reading Image from DOC device
+   40	common/cmd_doc.c	Image header has correct magic number
+   41	common/cmd_ide.c	before loading a Image from a IDE device
+  -42	common/cmd_ide.c	Bad usage of "ide" command
+   42	common/cmd_ide.c	correct usage of "ide" command
+  -43	common/cmd_ide.c	No boot device
+   43	common/cmd_ide.c	boot device found
+  -44	common/cmd_ide.c	Device not available
+   44	common/cmd_ide.c	Device available
+  -45	common/cmd_ide.c	wrong partition selected
+   45	common/cmd_ide.c	partition selected
+  -46	common/cmd_ide.c	Unknown partition table
+   46	common/cmd_ide.c	valid partition table found
+  -47	common/cmd_ide.c	Invalid partition type
+   47	common/cmd_ide.c	correct partition type
+  -48	common/cmd_ide.c	Error reading Image Header on boot device
+   48	common/cmd_ide.c	reading Image Header from IDE device OK
+  -49	common/cmd_ide.c	Image header has bad magic number
+   49	common/cmd_ide.c	Image header has correct magic number
+  -50	common/cmd_ide.c	Image header has bad	 checksum
+   50	common/cmd_ide.c	Image header has correct checksum
+  -51	common/cmd_ide.c	Error reading Image from IDE device
+   51	common/cmd_ide.c	reading Image from IDE device OK
+   52	common/cmd_nand.c	before loading a Image from a NAND device
+  -53	common/cmd_nand.c	Bad usage of "nand" command
+   53	common/cmd_nand.c	correct usage of "nand" command
+  -54	common/cmd_nand.c	No boot device
+   54	common/cmd_nand.c	boot device found
+  -55	common/cmd_nand.c	Unknown Chip ID on boot device
+   55	common/cmd_nand.c	correct chip ID found, device available
+  -56	common/cmd_nand.c	Error reading Image Header on boot device
+   56	common/cmd_nand.c	reading Image Header from NAND device OK
+  -57	common/cmd_nand.c	Image header has bad magic number
+   57	common/cmd_nand.c	Image header has correct magic number
+  -58	common/cmd_nand.c	Error reading Image from NAND device
+   58	common/cmd_nand.c	reading Image from NAND device OK
+
+  -60	common/env_common.c	Environment has a bad CRC, using default
+
+   64	net/eth.c		starting with Ethernetconfiguration.
+  -64	net/eth.c		no Ethernet found.
+   65	net/eth.c		Ethernet found.
+
+  -80	common/cmd_net.c	usage wrong
+   80	common/cmd_net.c	before calling NetLoop()
+  -81	common/cmd_net.c	some error in NetLoop() occured
+   81	common/cmd_net.c	NetLoop() back without error
+  -82	common/cmd_net.c	size == 0 (File with size 0 loaded)
+   82	common/cmd_net.c	trying automatic boot
+   83	common/cmd_net.c	running autoscript
+  -83	common/cmd_net.c	some error in automatic boot or autoscript
+   84	common/cmd_net.c	end without errors
 
 Modem Support:
 --------------

board/amcc/acadia/Makefile

@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(BOARD).a
 
-COBJS	= $(BOARD).o cmd_acadia.o cpr.o memory.o
+COBJS	= $(BOARD).o cmd_acadia.o memory.o pll.o
 SOBJS	=
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)

board/amcc/acadia/acadia.c

@@ -31,13 +31,13 @@ static void acadia_gpio_init(void)
 	/*
 	 * GPIO0 setup (select GPIO or alternate function)
 	 */
-       	out32(GPIO0_OSRL, CFG_GPIO0_OSRL);
-       	out32(GPIO0_OSRH, CFG_GPIO0_OSRH);	/* output select */
-       	out32(GPIO0_ISR1L, CFG_GPIO0_ISR1L);
-       	out32(GPIO0_ISR1H, CFG_GPIO0_ISR1H);	/* input select */
-       	out32(GPIO0_TSRL, CFG_GPIO0_TSRL);
-       	out32(GPIO0_TSRH, CFG_GPIO0_TSRH);	/* three-state select */
-       	out32(GPIO0_TCR, CFG_GPIO0_TCR);  /* enable output driver for outputs */
+	out32(GPIO0_OSRL, CFG_GPIO0_OSRL);
+	out32(GPIO0_OSRH, CFG_GPIO0_OSRH);	/* output select */
+	out32(GPIO0_ISR1L, CFG_GPIO0_ISR1L);
+	out32(GPIO0_ISR1H, CFG_GPIO0_ISR1H);	/* input select */
+	out32(GPIO0_TSRL, CFG_GPIO0_TSRL);
+	out32(GPIO0_TSRH, CFG_GPIO0_TSRH);	/* three-state select */
+	out32(GPIO0_TCR, CFG_GPIO0_TCR);  /* enable output driver for outputs */
 
 	/*
 	 * Ultra (405EZ) was nice enough to add another GPIO controller
@@ -55,10 +55,12 @@ int board_early_init_f(void)
 {
 	unsigned int reg;
 
+#if !defined(CONFIG_NAND_U_BOOT)
 	/* don't reinit PLL when booting via I2C bootstrap option */
 	mfsdr(SDR_PINSTP, reg);
 	if (reg != 0xf0000000)
 		board_pll_init_f();
+#endif
 
 	acadia_gpio_init();
 

board/amcc/acadia/memory.c

@@ -31,6 +31,8 @@
 #include <asm/io.h>
 #include <asm/gpio.h>
 
+extern void board_pll_init_f(void);
+
 /*
  * sdram_init - Dummy implementation for start.S, spd_sdram used on this board!
  */
@@ -67,6 +69,15 @@ static void cram_bcr_write(u32 wr_val)
 
 long int initdram(int board_type)
 {
+#if defined(CONFIG_NAND_SPL)
+	u32 reg;
+
+	/* don't reinit PLL when booting via I2C bootstrap option */
+	mfsdr(SDR_PINSTP, reg);
+	if (reg != 0xf0000000)
+		board_pll_init_f();
+#endif
+
 #if !defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)
 	int i;
 	u32 val;

board/amcc/bamboo/bamboo.c

@@ -416,7 +416,7 @@ int testdram(void)
  *	certain pre-initialization actions.
  *
  ************************************************************************/
-#if defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT)
+#if defined(CONFIG_PCI)
 int pci_pre_init(struct pci_controller *hose)
 {
 	unsigned long addr;
@@ -457,7 +457,7 @@ int pci_pre_init(struct pci_controller *hose)
 
 	return 1;
 }
-#endif				/* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */
+#endif /* defined(CONFIG_PCI) */
 
 /*************************************************************************
  *  pci_target_init

board/amcc/ebony/ebony.c

@@ -207,14 +207,14 @@ long int fixed_sdram(void)
  *	certain pre-initialization actions.
  *
  ************************************************************************/
-#if defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT)
+#if defined(CONFIG_PCI)
 int pci_pre_init(struct pci_controller *hose)
 {
 	unsigned long strap;
 
 	/*--------------------------------------------------------------------------+
-     *	The ebony board is always configured as the host & requires the
-     *	PCI arbiter to be enabled.
+	 * The ebony board is always configured as the host & requires the
+	 * PCI arbiter to be enabled.
 	 *--------------------------------------------------------------------------*/
 	strap = mfdcr(cpc0_strp1);
 	if ((strap & 0x00100000) == 0) {
@@ -224,7 +224,7 @@ int pci_pre_init(struct pci_controller *hose)
 
 	return 1;
 }
-#endif				/* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */
+#endif	/* defined(CONFIG_PCI) */
 
 /*************************************************************************
  *  pci_target_init

board/amcc/katmai/katmai.c

@@ -292,7 +292,7 @@ int testdram (void)
  *	certain pre-initialization actions.
  *
  ************************************************************************/
-#if defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT)
+#if defined(CONFIG_PCI)
 int pci_pre_init(struct pci_controller * hose )
 {
 	unsigned long strap;
@@ -309,7 +309,7 @@ int pci_pre_init(struct pci_controller * hose )
 
 	return 1;
 }
-#endif	/* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */
+#endif	/* defined(CONFIG_PCI) */
 
 /*************************************************************************
  *  pci_target_init

board/amcc/luan/luan.c

@@ -161,7 +161,7 @@ int testdram(void)
  *	certain pre-initialization actions.
  *
  ************************************************************************/
-#if defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT)
+#if defined(CONFIG_PCI)
 int pci_pre_init( struct pci_controller *hose )
 {
 	unsigned long strap;
@@ -179,7 +179,7 @@ int pci_pre_init( struct pci_controller *hose )
 
 	return  1;
 }
-#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */
+#endif /* defined(CONFIG_PCI) */
 
 
 /*************************************************************************

board/amcc/ocotea/ocotea.c

@@ -306,7 +306,7 @@ long int fixed_sdram (void)
  *	certain pre-initialization actions.
  *
  ************************************************************************/
-#if defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT)
+#if defined(CONFIG_PCI)
 int pci_pre_init(struct pci_controller * hose )
 {
 	unsigned long strap;
@@ -323,7 +323,7 @@ int pci_pre_init(struct pci_controller * hose )
 
 	return 1;
 }
-#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */
+#endif /* defined(CONFIG_PCI) */
 
 /*************************************************************************
  *  pci_target_init

board/amcc/sequoia/Makefile

@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(BOARD).a
 
-COBJS	= $(BOARD).o sdram.o
+COBJS	= $(BOARD).o cmd_sequoia.o sdram.o
 SOBJS	= init.o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)

board/amcc/sequoia/cmd_sequoia.c

@@ -0,0 +1,111 @@
+/*
+ * (C) Copyright 2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <command.h>
+#include <i2c.h>
+
+static u8 boot_533_nor[] = {
+	0x87, 0x78, 0x82, 0x52, 0x09, 0x57, 0xa0, 0x30,
+	0x40, 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00
+};
+
+static u8 boot_533_nand[] = {
+	0x87, 0x78, 0x82, 0x52, 0x09, 0x57, 0xd0, 0x10,
+	0xa0, 0x68, 0x23, 0x58, 0x0d, 0x05, 0x00, 0x00
+};
+
+static u8 boot_667_nor[] = {
+	0x87, 0x78, 0xa2, 0x52, 0x09, 0xd7, 0xa0, 0x30,
+	0x40, 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00
+};
+
+static u8 boot_667_nand[] = {
+	0x87, 0x78, 0xa2, 0x52, 0x09, 0xd7, 0xd0, 0x10,
+	0xa0, 0x68, 0x23, 0x58, 0x0d, 0x05, 0x00, 0x00
+};
+
+static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	u8 chip;
+	u8 *buf;
+	int cpu_freq;
+
+	if (argc < 3) {
+		printf("Usage:\n%s\n", cmdtp->usage);
+		return 1;
+	}
+
+	cpu_freq = simple_strtol(argv[1], NULL, 10);
+	if (!((cpu_freq == 533) || (cpu_freq == 667))) {
+		printf("Unsupported cpu-frequency - only 533 and 667 supported\n");
+		return 1;
+	}
+
+	/* use 0x52 as I2C EEPROM address for now */
+	chip = 0x52;
+
+	if ((strcmp(argv[2], "nor") != 0) &&
+	    (strcmp(argv[2], "nand") != 0)) {
+		printf("Unsupported boot-device - only nor|nand support\n");
+		return 1;
+	}
+
+	if (strcmp(argv[2], "nand") == 0) {
+		switch (cpu_freq) {
+		default:
+		case 533:
+			buf = boot_533_nand;
+			break;
+		case 667:
+			buf = boot_667_nand;
+			break;
+		}
+	} else {
+		switch (cpu_freq) {
+		default:
+		case 533:
+			buf = boot_533_nor;
+			break;
+		case 667:
+			buf = boot_667_nor;
+			break;
+		}
+	}
+
+	if (i2c_write(chip, 0, 1, buf, 16) != 0)
+		printf("Error writing to EEPROM at address 0x%x\n", chip);
+	udelay(CFG_EEPROM_PAGE_WRITE_DELAY_MS * 1000);
+
+	printf("Done\n");
+	printf("Please power-cycle the board for the changes to take effect\n");
+
+	return 0;
+}
+
+U_BOOT_CMD(
+	bootstrap,	3,	0,	do_bootstrap,
+	"bootstrap - program the I2C bootstrap EEPROM\n",
+	"<cpu-freq> <nor|nand> - program the I2C bootstrap EEPROM\n"
+	);

board/amcc/sequoia/sequoia.c

@@ -25,7 +25,6 @@
 #include <common.h>
 #include <asm/processor.h>
 #include <ppc440.h>
-#include "sequoia.h"
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -226,7 +225,7 @@ int misc_init_r(void)
 	if (act == NULL || strcmp(act, "hostdev") == 0)	{
 		/* SDR Setting */
 		mfsdr(SDR0_PFC1, sdr0_pfc1);
-		mfsdr(SDR0_USB0, usb2d0cr);
+		mfsdr(SDR0_USB2D0CR, usb2d0cr);
 		mfsdr(SDR0_USB2PHY0CR, usb2phy0cr);
 		mfsdr(SDR0_USB2H0CR, usb2h0cr);
 
@@ -254,7 +253,7 @@ int misc_init_r(void)
 		sdr0_pfc1 = sdr0_pfc1 | SDR0_PFC1_UES_USB2D_SEL;		/*0*/
 
 		mtsdr(SDR0_PFC1, sdr0_pfc1);
-		mtsdr(SDR0_USB0, usb2d0cr);
+		mtsdr(SDR0_USB2D0CR, usb2d0cr);
 		mtsdr(SDR0_USB2PHY0CR, usb2phy0cr);
 		mtsdr(SDR0_USB2H0CR, usb2h0cr);
 
@@ -298,7 +297,7 @@ int misc_init_r(void)
 		/* SDR Setting */
 		mfsdr(SDR0_USB2PHY0CR, usb2phy0cr);
 		mfsdr(SDR0_USB2H0CR, usb2h0cr);
-		mfsdr(SDR0_USB0, usb2d0cr);
+		mfsdr(SDR0_USB2D0CR, usb2d0cr);
 		mfsdr(SDR0_PFC1, sdr0_pfc1);
 
 		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_XOCLK_MASK;
@@ -323,7 +322,7 @@ int misc_init_r(void)
 
 		mtsdr(SDR0_USB2H0CR, usb2h0cr);
 		mtsdr(SDR0_USB2PHY0CR, usb2phy0cr);
-		mtsdr(SDR0_USB0, usb2d0cr);
+		mtsdr(SDR0_USB2D0CR, usb2d0cr);
 		mtsdr(SDR0_PFC1, sdr0_pfc1);
 
 		/*clear resets*/
@@ -426,23 +425,10 @@ int testdram(void)
  *	certain pre-initialization actions.
  *
  ************************************************************************/
-#if defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT)
+#if defined(CONFIG_PCI)
 int pci_pre_init(struct pci_controller *hose)
 {
 	unsigned long addr;
-#if 0
-	/*--------------------------------------------------------------------------+
-	 *	Cactus is always configured as the host & requires the
-	 *	PCI arbiter to be enabled ???
-	 *--------------------------------------------------------------------------*/
-	unsigned long strap;
-	mfsdr(sdr_sdstp1, strap);
-	if ((strap & SDR0_SDSTP1_PAE_MASK) == 0) {
-		printf("PCI: SDR0_STRP1[PAE] not set.\n");
-		printf("PCI: Configuration aborted.\n");
-		return 0;
-	}
-#endif
 
 	/*-------------------------------------------------------------------------+
 	  | Set priority for all PLB3 devices to 0.
@@ -480,7 +466,7 @@ int pci_pre_init(struct pci_controller *hose)
 
 	return 1;
 }
-#endif				/* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */
+#endif /* defined(CONFIG_PCI) */
 
 /*************************************************************************
  *  pci_target_init
@@ -586,3 +572,13 @@ int is_pci_host(struct pci_controller *hose)
 	return (1);
 }
 #endif				/* defined(CONFIG_PCI) */
+#if defined(CONFIG_POST)
+/*
+ * Returns 1 if keys pressed to start the power-on long-running tests
+ * Called from board_init_f().
+ */
+int post_hotkeys_pressed(void)
+{
+	return 0;	/* No hotkeys supported */
+}
+#endif /* CONFIG_POST */

board/amcc/sequoia/sequoia.h

@@ -1,67 +0,0 @@
-/*
- * (C) Copyright 2006
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * (C) Copyright 2006
- * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com
- * Alain Saurel,            AMCC/IBM, alain.saurel@fr.ibm.com
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-/*----------------------------------------------------------------------------+
-  | EBC Configuration Register - EBC0_CFG
-  +----------------------------------------------------------------------------*/
-/* External Bus Three-State Control */
-#define EBC0_CFG_EBTC_DRIVEN	    0x80000000
-/* Device-Paced Time-out Disable */
-#define EBC0_CFG_PTD_ENABLED	    0x00000000
-/* Ready Timeout Count */
-#define EBC0_CFG_RTC_MASK	    0x38000000
-#define EBC0_CFG_RTC_16PERCLK	    0x00000000
-#define EBC0_CFG_RTC_32PERCLK	    0x08000000
-#define EBC0_CFG_RTC_64PERCLK	    0x10000000
-#define EBC0_CFG_RTC_128PERCLK	    0x18000000
-#define EBC0_CFG_RTC_256PERCLK	    0x20000000
-#define EBC0_CFG_RTC_512PERCLK	    0x28000000
-#define EBC0_CFG_RTC_1024PERCLK	    0x30000000
-#define EBC0_CFG_RTC_2048PERCLK	    0x38000000
-/* External Master Priority Low */
-#define EBC0_CFG_EMPL_LOW	    0x00000000
-#define EBC0_CFG_EMPL_MEDIUM_LOW    0x02000000
-#define EBC0_CFG_EMPL_MEDIUM_HIGH   0x04000000
-#define EBC0_CFG_EMPL_HIGH	    0x06000000
-/* External Master Priority High */
-#define EBC0_CFG_EMPH_LOW	    0x00000000
-#define EBC0_CFG_EMPH_MEDIUM_LOW    0x00800000
-#define EBC0_CFG_EMPH_MEDIUM_HIGH   0x01000000
-#define EBC0_CFG_EMPH_HIGH	    0x01800000
-/* Chip Select Three-State Control */
-#define EBC0_CFG_CSTC_DRIVEN	    0x00400000
-/* Burst Prefetch */
-#define EBC0_CFG_BPF_ONEDW	    0x00000000
-#define EBC0_CFG_BPF_TWODW	    0x00100000
-#define EBC0_CFG_BPF_FOURDW	    0x00200000
-/* External Master Size */
-#define EBC0_CFG_EMS_8BIT	    0x00000000
-/* Power Management Enable */
-#define EBC0_CFG_PME_DISABLED	    0x00000000
-#define EBC0_CFG_PME_ENABLED	    0x00020000
-/* Power Management Timer */
-#define EBC0_CFG_PMT_ENCODE(n)		((((unsigned long)(n))&0x1F)<<12)
-
-#define SDR0_USB0                    0x0320     /* USB Control Register */

board/amcc/taishan/taishan.c

@@ -236,7 +236,7 @@ int testdram (void)
  *	certain pre-initialization actions.
  *
  ************************************************************************/
-#if defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT)
+#if defined(CONFIG_PCI)
 int pci_pre_init(struct pci_controller * hose )
 {
 	unsigned long strap;
@@ -253,7 +253,7 @@ int pci_pre_init(struct pci_controller * hose )
 
 	return 1;
 }
-#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */
+#endif /* defined(CONFIG_PCI) */
 
 /*************************************************************************
  *  pci_target_init

board/amcc/yosemite/yosemite.c

@@ -385,7 +385,7 @@ int testdram(void)
  *	certain pre-initialization actions.
  *
  ************************************************************************/
-#if defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT)
+#if defined(CONFIG_PCI)
 int pci_pre_init(struct pci_controller *hose)
 {
 	unsigned long addr;
@@ -426,7 +426,7 @@ int pci_pre_init(struct pci_controller *hose)
 
 	return 1;
 }
-#endif				/* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */
+#endif	/* defined(CONFIG_PCI) */
 
 /*************************************************************************
  *  pci_target_init

board/amcc/yucca/yucca.c

@@ -604,7 +604,7 @@ int testdram (void)
  *	certain pre-initialization actions.
  *
  ************************************************************************/
-#if defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT)
+#if defined(CONFIG_PCI)
 int pci_pre_init(struct pci_controller * hose )
 {
 	unsigned long strap;
@@ -621,7 +621,7 @@ int pci_pre_init(struct pci_controller * hose )
 
 	return 1;
 }
-#endif	/* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */
+#endif	/* defined(CONFIG_PCI) */
 
 /*************************************************************************
  *  pci_target_init

board/bf537-stamp/ether_bf537.c

@@ -48,7 +48,7 @@
 #define TXBUF_BASE_ADDR		0xFF800000
 #define TX_BUF_CNT		1
 
-#define TOUT_LOOP 		1000000
+#define TOUT_LOOP		1000000
 
 ADI_ETHER_BUFFER *txbuf[TX_BUF_CNT];
 ADI_ETHER_BUFFER *rxbuf[PKTBUFSRX];

board/bf537-stamp/flash-defines.h

@@ -44,9 +44,9 @@
 #define ERASE_SECT		6
 #define READ			7
 #define GET_SECTNUM		8
-#define FLASH_START_L 		0x0000
-#define FLASH_START_H 		0x2000
-#define FLASH_MAN_ST 		2
+#define FLASH_START_L		0x0000
+#define FLASH_START_H		0x2000
+#define FLASH_MAN_ST		2
 #define RESET_VAL		0xF0
 
 flash_info_t flash_info[CFG_MAX_FLASH_BANKS];

board/bf537-stamp/stm_m25p64.c

@@ -9,7 +9,7 @@
 
 /* Application definitions */
 
-#define	NUM_SECTORS 	128	/* number of sectors */
+#define	NUM_SECTORS	128	/* number of sectors */
 #define SECTOR_SIZE	0x10000
 #define NOP_NUM		1000
 

board/bf537-stamp/u-boot.lds.S

@@ -33,7 +33,7 @@ SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib);
    __DYNAMIC = 0;    */
 MEMORY
  {
- ram : 	   ORIGIN = (CFG_MONITOR_BASE), LENGTH = (256 * 1024)
+ ram :	   ORIGIN = (CFG_MONITOR_BASE), LENGTH = (256 * 1024)
  l1_code : ORIGIN = 0xFFA00000, LENGTH = 0xC000
  l1_data : ORIGIN = 0xFF900000, LENGTH = 0x4000
  }
@@ -47,11 +47,11 @@ SECTIONS
   .dynsym        : { *(.dynsym)		}
   .dynstr        : { *(.dynstr)		}
   .rel.text      : { *(.rel.text)	}
-  .rela.text     : { *(.rela.text) 	}
+  .rela.text     : { *(.rela.text)	}
   .rel.data      : { *(.rel.data)	}
-  .rela.data     : { *(.rela.data) 	}
-  .rel.rodata    : { *(.rel.rodata) 	}
-  .rela.rodata   : { *(.rela.rodata) 	}
+  .rela.data     : { *(.rela.data)	}
+  .rel.rodata    : { *(.rel.rodata)	}
+  .rela.rodata   : { *(.rela.rodata)	}
   .rel.got       : { *(.rel.got)	}
   .rela.got      : { *(.rela.got)	}
   .rel.ctors     : { *(.rel.ctors)	}
@@ -68,7 +68,7 @@ SECTIONS
   .text      :
   {
     /* WARNING - the following is hand-optimized to fit within	*/
-    /* the sector before the environment sector. If it throws 	*/
+    /* the sector before the environment sector. If it throws	*/
     /* an error during compilation remove an object here to get	*/
     /* it linked after the configuration sector.		*/
 

board/cds/mpc8548cds/mpc8548cds.c

@@ -345,23 +345,23 @@ int last_stage_init(void)
 	/* This is needed to get the RGMII working for the 1.3+
 	 * CDS cards */
 	if (get_board_version() ==  0x13) {
-		miiphy_write(CONFIG_MPC85XX_TSEC1_NAME,
+		miiphy_write(CONFIG_TSEC1_NAME,
 				TSEC1_PHY_ADDR, 29, 18);
 
-		miiphy_read(CONFIG_MPC85XX_TSEC1_NAME,
+		miiphy_read(CONFIG_TSEC1_NAME,
 				TSEC1_PHY_ADDR, 30, &temp);
 
 		temp = (temp & 0xf03f);
 		temp |= 2 << 9;		/* 36 ohm */
 		temp |= 2 << 6;		/* 39 ohm */
 
-		miiphy_write(CONFIG_MPC85XX_TSEC1_NAME,
+		miiphy_write(CONFIG_TSEC1_NAME,
 				TSEC1_PHY_ADDR, 30, temp);
 
-		miiphy_write(CONFIG_MPC85XX_TSEC1_NAME,
+		miiphy_write(CONFIG_TSEC1_NAME,
 				TSEC1_PHY_ADDR, 29, 3);
 
-		miiphy_write(CONFIG_MPC85XX_TSEC1_NAME,
+		miiphy_write(CONFIG_TSEC1_NAME,
 				TSEC1_PHY_ADDR, 30, 0x8000);
 	}
 

board/esd/cpci405/cpci405.c

@@ -23,13 +23,15 @@
 
 #include <common.h>
 #include <asm/processor.h>
+#include <asm/io.h>
 #include <command.h>
 #include <malloc.h>
 #include <net.h>
+#include <pci.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
-extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);       /*cmd_boot.c*/
+extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);	/*cmd_boot.c*/
 #if 0
 #define FPGA_DEBUG
 #endif
@@ -52,8 +54,6 @@ const unsigned char fpgadata[] =
  * include common fpga code (for esd boards)
  */
 #include "../common/fpga.c"
-
-
 #include "../common/auto_update.h"
 
 #ifdef CONFIG_CPCI405AB
@@ -86,13 +86,11 @@ au_image_t au_image[] = {
 
 int N_AU_IMAGES = (sizeof(au_image) / sizeof(au_image[0]));
 
-
 /* Prototypes */
 int cpci405_version(void);
 int gunzip(void *, int, unsigned char *, unsigned long *);
 void lxt971_no_sleep(void);
 
-
 int board_early_init_f (void)
 {
 #ifndef CONFIG_CPCI405_VER2
@@ -111,10 +109,10 @@ int board_early_init_f (void)
 	/*
 	 * First pull fpga-prg pin low, to disable fpga logic (on version 2 board)
 	 */
-	out32(GPIO0_ODR, 0x00000000);        /* no open drain pins      */
-	out32(GPIO0_TCR, CFG_FPGA_PRG);      /* setup for output        */
+	out32(GPIO0_ODR, 0x00000000);	     /* no open drain pins	*/
+	out32(GPIO0_TCR, CFG_FPGA_PRG);      /* setup for output	*/
 	out32(GPIO0_OR,  CFG_FPGA_PRG);      /* set output pins to high */
-	out32(GPIO0_OR, 0);                  /* pull prg low            */
+	out32(GPIO0_OR, 0);		     /* pull prg low		*/
 
 	/*
 	 * Boot onboard FPGA
@@ -176,47 +174,48 @@ int board_early_init_f (void)
 	 * IRQ 30 (EXT IRQ 5) PCI SLOT 3; active low; level sensitive
 	 * IRQ 31 (EXT IRQ 6) COMPACT FLASH; active high; level sensitive
 	 */
-	mtdcr(uicsr, 0xFFFFFFFF);       /* clear all ints */
-	mtdcr(uicer, 0x00000000);       /* disable all ints */
-	mtdcr(uiccr, 0x00000000);       /* set all to be non-critical*/
+	mtdcr(uicsr, 0xFFFFFFFF);	/* clear all ints */
+	mtdcr(uicer, 0x00000000);	/* disable all ints */
+	mtdcr(uiccr, 0x00000000);	/* set all to be non-critical*/
+#ifdef CONFIG_CPCI405_6U
 	if (cpci405_version() == 3) {
-		mtdcr(uicpr, 0xFFFFFF99);       /* set int polarities */
+		mtdcr(uicpr, 0xFFFFFF99);	/* set int polarities */
 	} else {
-		mtdcr(uicpr, 0xFFFFFF81);       /* set int polarities */
+		mtdcr(uicpr, 0xFFFFFF81);	/* set int polarities */
 	}
-	mtdcr(uictr, 0x10000000);       /* set int trigger levels */
-	mtdcr(uicvcr, 0x00000001);      /* set vect base=0,INT0 highest priority*/
-	mtdcr(uicsr, 0xFFFFFFFF);       /* clear all ints */
+#else
+	mtdcr(uicpr, 0xFFFFFF81);	/* set int polarities */
+#endif
+	mtdcr(uictr, 0x10000000);	/* set int trigger levels */
+	mtdcr(uicvcr, 0x00000001);	/* set vect base=0,INT0 highest priority*/
+	mtdcr(uicsr, 0xFFFFFFFF);	/* clear all ints */
 
 	return 0;
 }
 
-
 /* ------------------------------------------------------------------------- */
 
 int ctermm2(void)
 {
 #ifdef CONFIG_CPCI405_VER2
-	return 0;                       /* no, board is cpci405 */
+	return 0;			/* no, board is cpci405 */
 #else
 	if ((*(unsigned char *)0xf0000400 == 0x00) &&
 	    (*(unsigned char *)0xf0000401 == 0x01))
-		return 0;               /* no, board is cpci405 */
+		return 0;		/* no, board is cpci405 */
 	else
-		return -1;              /* yes, board is cterm-m2 */
+		return -1;		/* yes, board is cterm-m2 */
 #endif
 }
 
-
 int cpci405_host(void)
 {
 	if (mfdcr(strap) & PSR_PCI_ARBIT_EN)
-		return -1;              /* yes, board is cpci405 host */
+		return -1;		/* yes, board is cpci405 host */
 	else
-		return 0;               /* no, board is cpci405 adapter */
+		return 0;		/* no, board is cpci405 adapter */
 }
 
-
 int cpci405_version(void)
 {
 	unsigned long cntrl0Reg;
@@ -227,10 +226,10 @@ int cpci405_version(void)
 	 */
 	cntrl0Reg = mfdcr(cntrl0);
 	mtdcr(cntrl0, cntrl0Reg | 0x03000000);
-	out32(GPIO0_ODR, in32(GPIO0_ODR) & ~0x00180000);
-	out32(GPIO0_TCR, in32(GPIO0_TCR) & ~0x00180000);
-	udelay(1000);                   /* wait some time before reading input */
-	value = in32(GPIO0_IR) & 0x00180000;       /* get config bits */
+	out_be32((void*)GPIO0_ODR, in_be32((void*)GPIO0_ODR) & ~0x00180000);
+	out_be32((void*)GPIO0_TCR, in_be32((void*)GPIO0_TCR) & ~0x00180000);
+	udelay(1000);			/* wait some time before reading input */
+	value = in_be32((void*)GPIO0_IR) & 0x00180000;	     /* get config bits */
 
 	/*
 	 * Restore GPIO settings
@@ -245,7 +244,7 @@ int cpci405_version(void)
 		/* CS2==0 && CS3==1 -> version 2 */
 		return 2;
 	case 0x00100000:
-		/* CS2==1 && CS3==0 -> version 3 */
+		/* CS2==1 && CS3==0 -> version 3 or 6U board */
 		return 3;
 	case 0x00000000:
 		/* CS2==0 && CS3==0 -> version 4 */
@@ -256,13 +255,11 @@ int cpci405_version(void)
 	}
 }
 
-
 int misc_init_f (void)
 {
 	return 0;  /* dummy implementation */
 }
 
-
 int misc_init_r (void)
 {
 	unsigned long cntrl0Reg;
@@ -283,7 +280,6 @@ int misc_init_r (void)
 	 * On CPCI-405 version 2 the environment is saved in eeprom!
 	 * FPGA can be gzip compressed (malloc) and booted this late.
 	 */
-
 	if (cpci405_version() >= 2) {
 		/*
 		 * Setup GPIO pins (CS6+CS7 as GPIO)
@@ -354,6 +350,7 @@ int misc_init_r (void)
 		SET_FPGA(FPGA_PRG | FPGA_CLK | FPGA_DATA);
 		udelay(1000); /* wait 1ms */
 
+#ifdef CONFIG_CPCI405_6U
 		if (cpci405_version() == 3) {
 			volatile unsigned short *fpga_mode = (unsigned short *)CFG_FPGA_BASE_ADDR;
 			volatile unsigned char *leds = (unsigned char *)CFG_LED_ADDR;
@@ -375,6 +372,7 @@ int misc_init_r (void)
 			udelay(100);
 			*fpga_mode &= ~(CFG_FPGA_MODE_DUART_RESET);
 		}
+#endif
 	}
 	else {
 		puts("\n*** U-Boot Version does not match Board Version!\n");
@@ -425,7 +423,6 @@ int misc_init_r (void)
 	return (0);
 }
 
-
 /*
  * Check Board Identity:
  */
@@ -481,7 +478,7 @@ int checkboard (void)
 	}
 
 #ifndef CONFIG_CPCI405_VER2
-	puts ("\nFPGA:  ");
+	puts ("\nFPGA:	");
 
 	/* display infos on fpgaimage */
 	index = 15;
@@ -493,12 +490,6 @@ int checkboard (void)
 #endif
 
 	putc ('\n');
-
-	/*
-	 * Disable sleep mode in LXT971
-	 */
-	lxt971_no_sleep();
-
 	return 0;
 }
 
@@ -511,22 +502,18 @@ long int initdram (int board_type)
 	mtdcr(memcfga, mem_mb0cf);
 	val = mfdcr(memcfgd);
 
-#if 0
-	printf("\nmb0cf=%x\n", val); /* test-only */
-	printf("strap=%x\n", mfdcr(strap)); /* test-only */
-#endif
-
 	return (4*1024*1024 << ((val & 0x000e0000) >> 17));
 }
 
-/* ------------------------------------------------------------------------- */
-
-int testdram (void)
+void reset_phy(void)
 {
-	/* TODO: XXX XXX XXX */
-	printf ("test: 16 MB - ok\n");
+#ifdef CONFIG_LXT971_NO_SLEEP
 
-	return (0);
+	/*
+	 * Disable sleep mode in LXT971
+	 */
+	lxt971_no_sleep();
+#endif
 }
 
 /* ------------------------------------------------------------------------- */
@@ -551,14 +538,47 @@ void ide_set_reset(int on)
 #endif /* CONFIG_IDE_RESET */
 #endif /* CONFIG_CPCI405_VER2 */
 
+#if defined(CONFIG_PCI)
+void cpci405_pci_fixup_irq(struct pci_controller *hose, pci_dev_t dev)
+{
+	unsigned char int_line = 0xff;
+
+	/*
+	 * Write pci interrupt line register (cpci405 specific)
+	 */
+	switch (PCI_DEV(dev) & 0x03) {
+	case 0:
+		int_line = 27 + 2;
+		break;
+	case 1:
+		int_line = 27 + 3;
+		break;
+	case 2:
+		int_line = 27 + 0;
+		break;
+	case 3:
+		int_line = 27 + 1;
+		break;
+	}
+
+	pci_hose_write_config_byte(hose, dev, PCI_INTERRUPT_LINE, int_line);
+}
+
+int pci_pre_init(struct pci_controller *hose)
+{
+	hose->fixup_irq = cpci405_pci_fixup_irq;
+	return 1;
+}
+#endif /* defined(CONFIG_PCI) */
+
 
 #ifdef CONFIG_CPCI405AB
 
-#define ONE_WIRE_CLEAR   (*(volatile unsigned short *)(CFG_FPGA_BASE_ADDR + CFG_FPGA_MODE) \
+#define ONE_WIRE_CLEAR	 (*(volatile unsigned short *)(CFG_FPGA_BASE_ADDR + CFG_FPGA_MODE) \
 			  |= CFG_FPGA_MODE_1WIRE_DIR)
-#define ONE_WIRE_SET     (*(volatile unsigned short *)(CFG_FPGA_BASE_ADDR + CFG_FPGA_MODE) \
+#define ONE_WIRE_SET	 (*(volatile unsigned short *)(CFG_FPGA_BASE_ADDR + CFG_FPGA_MODE) \
 			  &= ~CFG_FPGA_MODE_1WIRE_DIR)
-#define ONE_WIRE_GET     (*(volatile unsigned short *)(CFG_FPGA_BASE_ADDR + CFG_FPGA_STATUS) \
+#define ONE_WIRE_GET	 (*(volatile unsigned short *)(CFG_FPGA_BASE_ADDR + CFG_FPGA_STATUS) \
 			  & CFG_FPGA_MODE_1WIRE)
 
 /*
@@ -581,7 +601,6 @@ int OWTouchReset(void)
 	return result;
 }
 
-
 /*
  * Send 1 a 1-wire write bit.
  * Provide 10us recovery time.
@@ -607,7 +626,6 @@ void OWWriteBit(int bit)
 	}
 }
 
-
 /*
  * Read a bit from the 1-wire bus and return it.
  * Provide 10us recovery time.
@@ -627,7 +645,6 @@ int OWReadBit(void)
 	return result;
 }
 
-
 void OWWriteByte(int data)
 {
 	int loop;
@@ -638,7 +655,6 @@ void OWWriteByte(int data)
 	}
 }
 
-
 int OWReadByte(void)
 {
 	int loop, result = 0;
@@ -653,7 +669,6 @@ int OWReadByte(void)
 	return result;
 }
 
-
 int do_onewire(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
 	volatile unsigned short val;
@@ -694,7 +709,6 @@ U_BOOT_CMD(
 	NULL
 	);
 
-
 #define CFG_I2C_EEPROM_ADDR_2	0x51	/* EEPROM CAT28WC32		*/
 #define CFG_ENV_SIZE_2	0x800	/* 2048 bytes may be used for env vars*/
 

board/hermes/hermes.c

@@ -597,6 +597,7 @@ void show_boot_progress (int status)
 {
 	volatile immap_t *immr = (immap_t *) CFG_IMMR;
 
+	if (status < -32) status = -1;	/* let things compatible */
 	status ^= 0x0F;
 	status = (status & 0x0F) << 14;
 	immr->im_cpm.cp_pbdat = (immr->im_cpm.cp_pbdat & ~PB_LED_ALL) | status;

board/logodl/logodl.c

@@ -107,6 +107,7 @@ void logodl_set_led(int led, int state)
 
 void show_boot_progress (int status)
 {
+	if (status < -32) status = -1;  /* let things compatible */
 	/*
 	  switch(status) {
 	  case  1: logodl_set_led(0,1); break;

board/lwmon5/Makefile

@@ -0,0 +1,51 @@
+#
+# (C) Copyright 2002-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).a
+
+COBJS	= $(BOARD).o sdram.o
+SOBJS	= init.o
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(OBJS) $(SOBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################

board/lwmon5/config.mk

@@ -0,0 +1,39 @@
+#
+# (C) Copyright 2002
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+#
+# lwmon5 (440EPx)
+#
+
+ifndef TEXT_BASE
+TEXT_BASE = 0xFFF80000
+endif
+
+PLATFORM_CPPFLAGS += -DCONFIG_440=1
+
+ifeq ($(debug),1)
+PLATFORM_CPPFLAGS += -DDEBUG
+endif
+
+ifeq ($(dbcr),1)
+PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000
+endif

board/lwmon5/init.S

@@ -0,0 +1,90 @@
+/*
+ * (C) Copyright 2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ *  Copyright (C) 2002 Scott McNutt <smcnutt@artesyncp.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <ppc_asm.tmpl>
+#include <config.h>
+#include <asm-ppc/mmu.h>
+
+/**************************************************************************
+ * TLB TABLE
+ *
+ * This table is used by the cpu boot code to setup the initial tlb
+ * entries. Rather than make broad assumptions in the cpu source tree,
+ * this table lets each board set things up however they like.
+ *
+ *  Pointer to the table is returned in r1
+ *
+ *************************************************************************/
+	.section .bootpg,"ax"
+	.globl tlbtab
+
+tlbtab:
+	tlbtab_start
+
+	/*
+	 * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the
+	 * speed up boot process. It is patched after relocation to enable SA_I
+	 */
+	tlbentry(CFG_BOOT_BASE_ADDR, SZ_256M, CFG_BOOT_BASE_ADDR, 1, AC_R|AC_W|AC_X|SA_G)
+
+	/*
+	 * TLB entries for SDRAM are not needed on this platform.
+	 * They are dynamically generated in the SPD DDR(2) detection
+	 * routine.
+	 */
+
+#ifdef CFG_INIT_RAM_DCACHE
+	/* TLB-entry for init-ram in dcache (SA_I must be turned off!) */
+	tlbentry(CFG_INIT_RAM_ADDR, SZ_64K, CFG_INIT_RAM_ADDR, 0, AC_R|AC_W|AC_X|SA_G)
+#endif
+
+	/* TLB-entry for PCI Memory */
+	tlbentry(CFG_PCI_MEMBASE, SZ_256M, CFG_PCI_MEMBASE, 1, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CFG_PCI_MEMBASE1, SZ_256M, CFG_PCI_MEMBASE1, 1, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CFG_PCI_MEMBASE2, SZ_256M, CFG_PCI_MEMBASE2, 1, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CFG_PCI_MEMBASE3, SZ_256M, CFG_PCI_MEMBASE3, 1, AC_R|AC_W|SA_G|SA_I)
+
+	/* TLB-entry for the FPGA Chip select 2 */
+	tlbentry(CFG_FPGA_BASE_0, SZ_1M, CFG_FPGA_BASE_0, 1, AC_R|AC_W|AC_X|SA_I|SA_G)
+
+	/* TLB-entry for the FPGA Chip select 3 */
+	tlbentry(CFG_FPGA_BASE_1, SZ_1M, CFG_FPGA_BASE_1, 1,AC_R|AC_W|AC_X|SA_I|SA_G)
+
+	/* TLB-entry for the LIME Controller */
+	tlbentry(CFG_LIME_BASE_0, SZ_16M, CFG_LIME_BASE_0, 1, AC_R|AC_W|AC_X|SA_I|SA_G)
+	tlbentry(CFG_LIME_BASE_1, SZ_16M, CFG_LIME_BASE_1, 1, AC_R|AC_W|AC_X|SA_I|SA_G)
+	tlbentry(CFG_LIME_BASE_2, SZ_16M, CFG_LIME_BASE_2, 1, AC_R|AC_W|AC_X|SA_I|SA_G)
+	tlbentry(CFG_LIME_BASE_3, SZ_16M, CFG_LIME_BASE_3, 1, AC_R|AC_W|AC_X|SA_I|SA_G)
+
+	/* TLB-entry for Internal Registers & OCM */
+	tlbentry(0xe0000000, SZ_16M, 0xe0000000, 0,  AC_R|AC_W|AC_X|SA_I)
+
+	/*TLB-entry PCI registers*/
+	tlbentry(0xEEC00000, SZ_1K, 0xEEC00000, 1,  AC_R|AC_W|AC_X|SA_G|SA_I)
+
+	/* TLB-entry for peripherals */
+	tlbentry(0xEF000000, SZ_16M, 0xEF000000, 1, AC_R|AC_W|AC_X|SA_G|SA_I)
+
+	tlbtab_end

board/lwmon5/lwmon5.c

@@ -0,0 +1,465 @@
+/*
+ * (C) Copyright 2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <ppc440.h>
+#include <asm/processor.h>
+#include <asm/gpio.h>
+#include <asm/io.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+
+ulong flash_get_size (ulong base, int banknum);
+
+int board_early_init_f(void)
+{
+	u32 sdr0_pfc1, sdr0_pfc2;
+	u32 reg;
+
+	/* PLB Write pipelining disabled. Denali Core workaround */
+	mtdcr(plb0_acr, 0xDE000000);
+	mtdcr(plb1_acr, 0xDE000000);
+
+	/*--------------------------------------------------------------------
+	 * Setup the interrupt controller polarities, triggers, etc.
+	 *-------------------------------------------------------------------*/
+	mtdcr(uic0sr, 0xffffffff);  /* clear all. if write with 1 then the status is cleared  */
+	mtdcr(uic0er, 0x00000000);  /* disable all */
+	mtdcr(uic0cr, 0x00000000);  /* we have not critical interrupts at the moment */
+	mtdcr(uic0pr, 0xfffff7ff);  /* Adjustment of the polarity */
+	mtdcr(uic0tr, 0x00000810);  /* per ref-board manual */
+	mtdcr(uic0vr, 0x00000000);  /* int31 highest, base=0x000 is within DDRAM */
+	mtdcr(uic0sr, 0xffffffff);  /* clear all */
+
+	mtdcr(uic1sr, 0xffffffff);  /* clear all */
+	mtdcr(uic1er, 0x00000000);  /* disable all */
+	mtdcr(uic1cr, 0x00000000);  /* all non-critical */
+	mtdcr(uic1pr, 0xFFFFC7AD);  /* Adjustment of the polarity */
+	mtdcr(uic1tr, 0x0600384A);  /* per ref-board manual */
+	mtdcr(uic1vr, 0x00000000);  /* int31 highest, base=0x000 is within DDRAM */
+	mtdcr(uic1sr, 0xffffffff);  /* clear all */
+
+	mtdcr(uic2sr, 0xffffffff);  /* clear all */
+	mtdcr(uic2er, 0x00000000);  /* disable all */
+	mtdcr(uic2cr, 0x00000000);  /* all non-critical */
+	mtdcr(uic2pr, 0x27C00000);  /* Adjustment of the polarity */
+	mtdcr(uic2tr, 0xDFC00000);  /* per ref-board manual */
+	mtdcr(uic2vr, 0x00000000);  /* int31 highest, base=0x000 is within DDRAM */
+	mtdcr(uic2sr, 0xffffffff);  /* clear all. Why this??? */
+
+	/* Trace Pins are disabled. SDR0_PFC0 Register */
+	mtsdr(SDR0_PFC0, 0x0);
+
+	/* select Ethernet pins */
+	mfsdr(SDR0_PFC1, sdr0_pfc1);
+	/* SMII via ZMII */
+	sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_SELECT_MASK) |
+		SDR0_PFC1_SELECT_CONFIG_6;
+	mfsdr(SDR0_PFC2, sdr0_pfc2);
+	sdr0_pfc2 = (sdr0_pfc2 & ~SDR0_PFC2_SELECT_MASK) |
+		SDR0_PFC2_SELECT_CONFIG_6;
+
+	/* enable SPI (SCP) */
+	sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_SIS_MASK) | SDR0_PFC1_SIS_SCP_SEL;
+
+	mtsdr(SDR0_PFC2, sdr0_pfc2);
+	mtsdr(SDR0_PFC1, sdr0_pfc1);
+
+	mtsdr(SDR0_PFC4, 0x80000000);
+
+	/* PCI arbiter disabled */
+	/* PCI Host Configuration disbaled */
+	mfsdr(sdr_pci0, reg);
+	reg = 0;
+	mtsdr(sdr_pci0, 0x00000000 | reg);
+
+	gpio_write_bit(CFG_GPIO_FLASH_WP, 1);
+
+	return 0;
+}
+
+/*---------------------------------------------------------------------------+
+  | misc_init_r.
+  +---------------------------------------------------------------------------*/
+int misc_init_r(void)
+{
+	u32 pbcr;
+	int size_val = 0;
+	u32 reg;
+	unsigned long usb2d0cr = 0;
+	unsigned long usb2phy0cr, usb2h0cr = 0;
+	unsigned long sdr0_pfc1;
+
+	/*
+	 * FLASH stuff...
+	 */
+
+	/* Re-do sizing to get full correct info */
+
+	/* adjust flash start and offset */
+	gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize;
+	gd->bd->bi_flashoffset = 0;
+
+	mfebc(pb0cr, pbcr);
+	switch (gd->bd->bi_flashsize) {
+	case 1 << 20:
+		size_val = 0;
+		break;
+	case 2 << 20:
+		size_val = 1;
+		break;
+	case 4 << 20:
+		size_val = 2;
+		break;
+	case 8 << 20:
+		size_val = 3;
+		break;
+	case 16 << 20:
+		size_val = 4;
+		break;
+	case 32 << 20:
+		size_val = 5;
+		break;
+	case 64 << 20:
+		size_val = 6;
+		break;
+	case 128 << 20:
+		size_val = 7;
+		break;
+	}
+	pbcr = (pbcr & 0x0001ffff) | gd->bd->bi_flashstart | (size_val << 17);
+	mtebc(pb0cr, pbcr);
+
+	/*
+	 * Re-check to get correct base address
+	 */
+	flash_get_size(gd->bd->bi_flashstart, 0);
+
+	/* Monitor protection ON by default */
+	(void)flash_protect(FLAG_PROTECT_SET,
+			    -CFG_MONITOR_LEN,
+			    0xffffffff,
+			    &flash_info[0]);
+
+	/* Env protection ON by default */
+	(void)flash_protect(FLAG_PROTECT_SET,
+			    CFG_ENV_ADDR_REDUND,
+			    CFG_ENV_ADDR_REDUND + 2*CFG_ENV_SECT_SIZE - 1,
+			    &flash_info[0]);
+
+	/*
+	 * USB suff...
+	 */
+	/* SDR Setting */
+	mfsdr(SDR0_PFC1, sdr0_pfc1);
+	mfsdr(SDR0_USB0, usb2d0cr);
+	mfsdr(SDR0_USB2PHY0CR, usb2phy0cr);
+	mfsdr(SDR0_USB2H0CR, usb2h0cr);
+
+	usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_XOCLK_MASK;
+	usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL;	/*0*/
+	usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_WDINT_MASK;
+	usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_WDINT_16BIT_30MHZ;	/*1*/
+	usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DVBUS_MASK;
+	usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PURDIS;		/*0*/
+	usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DWNSTR_MASK;
+	usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_HOST;		/*1*/
+	usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_UTMICN_MASK;
+	usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_HOST;		/*1*/
+
+	/* An 8-bit/60MHz interface is the only possible alternative
+	   when connecting the Device to the PHY */
+	usb2h0cr   = usb2h0cr &~SDR0_USB2H0CR_WDINT_MASK;
+	usb2h0cr   = usb2h0cr | SDR0_USB2H0CR_WDINT_16BIT_30MHZ;	/*1*/
+
+	mtsdr(SDR0_PFC1, sdr0_pfc1);
+	mtsdr(SDR0_USB0, usb2d0cr);
+	mtsdr(SDR0_USB2PHY0CR, usb2phy0cr);
+	mtsdr(SDR0_USB2H0CR, usb2h0cr);
+
+	/*
+	 * Clear resets
+	 */
+	udelay (1000);
+	mtsdr(SDR0_SRST1, 0x00000000);
+	udelay (1000);
+	mtsdr(SDR0_SRST0, 0x00000000);
+
+	printf("USB:   Host(int phy) Device(ext phy)\n");
+
+	/*
+	 * Clear PLB4A0_ACR[WRP]
+	 * This fix will make the MAL burst disabling patch for the Linux
+	 * EMAC driver obsolete.
+	 */
+	reg = mfdcr(plb4_acr) & ~PLB4_ACR_WRP;
+	mtdcr(plb4_acr, reg);
+
+	/*
+	 * Reset Lime controller
+	 */
+	gpio_write_bit(CFG_GPIO_LIME_S, 1);
+	udelay(500);
+	gpio_write_bit(CFG_GPIO_LIME_RST, 1);
+
+	/* Lime memory clock adjusted to 133MHz */
+	out_be32((void *)CFG_LIME_SDRAM_CLOCK, CFG_LIME_CLOCK_133MHZ);
+	/* Wait untill time expired. Because of requirements in lime manual */
+	udelay(300);
+	/* Write lime controller memory parameters */
+	out_be32((void *)CFG_LIME_MMR, CFG_LIME_MMR_VALUE);
+
+	/*
+	 * Reset PHY's
+	 */
+	gpio_write_bit(CFG_GPIO_PHY0_RST, 0);
+	gpio_write_bit(CFG_GPIO_PHY1_RST, 0);
+	udelay(100);
+	gpio_write_bit(CFG_GPIO_PHY0_RST, 1);
+	gpio_write_bit(CFG_GPIO_PHY1_RST, 1);
+
+	return 0;
+}
+
+int checkboard(void)
+{
+	char *s = getenv("serial#");
+
+	printf("Board: lwmon5");
+
+	if (s != NULL) {
+		puts(", serial# ");
+		puts(s);
+	}
+	putc('\n');
+
+	return (0);
+}
+
+#if defined(CFG_DRAM_TEST)
+int testdram(void)
+{
+	unsigned long *mem = (unsigned long *)0;
+	const unsigned long kend = (1024 / sizeof(unsigned long));
+	unsigned long k, n;
+
+	mtmsr(0);
+
+	for (k = 0; k < CFG_MBYTES_SDRAM;
+	     ++k, mem += (1024 / sizeof(unsigned long))) {
+		if ((k & 1023) == 0) {
+			printf("%3d MB\r", k / 1024);
+		}
+
+		memset(mem, 0xaaaaaaaa, 1024);
+		for (n = 0; n < kend; ++n) {
+			if (mem[n] != 0xaaaaaaaa) {
+				printf("SDRAM test fails at: %08x\n",
+				       (uint) & mem[n]);
+				return 1;
+			}
+		}
+
+		memset(mem, 0x55555555, 1024);
+		for (n = 0; n < kend; ++n) {
+			if (mem[n] != 0x55555555) {
+				printf("SDRAM test fails at: %08x\n",
+				       (uint) & mem[n]);
+				return 1;
+			}
+		}
+	}
+	printf("SDRAM test passes\n");
+	return 0;
+}
+#endif
+
+/*************************************************************************
+ *  pci_pre_init
+ *
+ *  This routine is called just prior to registering the hose and gives
+ *  the board the opportunity to check things. Returning a value of zero
+ *  indicates that things are bad & PCI initialization should be aborted.
+ *
+ *	Different boards may wish to customize the pci controller structure
+ *	(add regions, override default access routines, etc) or perform
+ *	certain pre-initialization actions.
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI)
+int pci_pre_init(struct pci_controller *hose)
+{
+	unsigned long addr;
+
+	/*-------------------------------------------------------------------------+
+	  | Set priority for all PLB3 devices to 0.
+	  | Set PLB3 arbiter to fair mode.
+	  +-------------------------------------------------------------------------*/
+	mfsdr(sdr_amp1, addr);
+	mtsdr(sdr_amp1, (addr & 0x000000FF) | 0x0000FF00);
+	addr = mfdcr(plb3_acr);
+	mtdcr(plb3_acr, addr | 0x80000000);
+
+	/*-------------------------------------------------------------------------+
+	  | Set priority for all PLB4 devices to 0.
+	  +-------------------------------------------------------------------------*/
+	mfsdr(sdr_amp0, addr);
+	mtsdr(sdr_amp0, (addr & 0x000000FF) | 0x0000FF00);
+	addr = mfdcr(plb4_acr) | 0xa0000000;	/* Was 0x8---- */
+	mtdcr(plb4_acr, addr);
+
+	/*-------------------------------------------------------------------------+
+	  | Set Nebula PLB4 arbiter to fair mode.
+	  +-------------------------------------------------------------------------*/
+	/* Segment0 */
+	addr = (mfdcr(plb0_acr) & ~plb0_acr_ppm_mask) | plb0_acr_ppm_fair;
+	addr = (addr & ~plb0_acr_hbu_mask) | plb0_acr_hbu_enabled;
+	addr = (addr & ~plb0_acr_rdp_mask) | plb0_acr_rdp_4deep;
+	addr = (addr & ~plb0_acr_wrp_mask) | plb0_acr_wrp_2deep;
+	mtdcr(plb0_acr, addr);
+
+	/* Segment1 */
+	addr = (mfdcr(plb1_acr) & ~plb1_acr_ppm_mask) | plb1_acr_ppm_fair;
+	addr = (addr & ~plb1_acr_hbu_mask) | plb1_acr_hbu_enabled;
+	addr = (addr & ~plb1_acr_rdp_mask) | plb1_acr_rdp_4deep;
+	addr = (addr & ~plb1_acr_wrp_mask) | plb1_acr_wrp_2deep;
+	mtdcr(plb1_acr, addr);
+
+	return 1;
+}
+#endif	/* defined(CONFIG_PCI) */
+
+/*************************************************************************
+ *  pci_target_init
+ *
+ *	The bootstrap configuration provides default settings for the pci
+ *	inbound map (PIM). But the bootstrap config choices are limited and
+ *	may not be sufficient for a given board.
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
+void pci_target_init(struct pci_controller *hose)
+{
+	/*--------------------------------------------------------------------------+
+	 * Set up Direct MMIO registers
+	 *--------------------------------------------------------------------------*/
+	/*--------------------------------------------------------------------------+
+	  | PowerPC440EPX PCI Master configuration.
+	  | Map one 1Gig range of PLB/processor addresses to PCI memory space.
+	  |   PLB address 0xA0000000-0xDFFFFFFF ==> PCI address 0xA0000000-0xDFFFFFFF
+	  |   Use byte reversed out routines to handle endianess.
+	  | Make this region non-prefetchable.
+	  +--------------------------------------------------------------------------*/
+	out32r(PCIX0_PMM0MA, 0x00000000);	/* PMM0 Mask/Attribute - disabled b4 setting */
+	out32r(PCIX0_PMM0LA, CFG_PCI_MEMBASE);	/* PMM0 Local Address */
+	out32r(PCIX0_PMM0PCILA, CFG_PCI_MEMBASE);	/* PMM0 PCI Low Address */
+	out32r(PCIX0_PMM0PCIHA, 0x00000000);	/* PMM0 PCI High Address */
+	out32r(PCIX0_PMM0MA, 0xE0000001);	/* 512M + No prefetching, and enable region */
+
+	out32r(PCIX0_PMM1MA, 0x00000000);	/* PMM0 Mask/Attribute - disabled b4 setting */
+	out32r(PCIX0_PMM1LA, CFG_PCI_MEMBASE2); /* PMM0 Local Address */
+	out32r(PCIX0_PMM1PCILA, CFG_PCI_MEMBASE2);	/* PMM0 PCI Low Address */
+	out32r(PCIX0_PMM1PCIHA, 0x00000000);	/* PMM0 PCI High Address */
+	out32r(PCIX0_PMM1MA, 0xE0000001);	/* 512M + No prefetching, and enable region */
+
+	out32r(PCIX0_PTM1MS, 0x00000001);	/* Memory Size/Attribute */
+	out32r(PCIX0_PTM1LA, 0);	/* Local Addr. Reg */
+	out32r(PCIX0_PTM2MS, 0);	/* Memory Size/Attribute */
+	out32r(PCIX0_PTM2LA, 0);	/* Local Addr. Reg */
+
+	/*--------------------------------------------------------------------------+
+	 * Set up Configuration registers
+	 *--------------------------------------------------------------------------*/
+
+	/* Program the board's subsystem id/vendor id */
+	pci_write_config_word(0, PCI_SUBSYSTEM_VENDOR_ID,
+			      CFG_PCI_SUBSYS_VENDORID);
+	pci_write_config_word(0, PCI_SUBSYSTEM_ID, CFG_PCI_SUBSYS_ID);
+
+	/* Configure command register as bus master */
+	pci_write_config_word(0, PCI_COMMAND, PCI_COMMAND_MASTER);
+
+	/* 240nS PCI clock */
+	pci_write_config_word(0, PCI_LATENCY_TIMER, 1);
+
+	/* No error reporting */
+	pci_write_config_word(0, PCI_ERREN, 0);
+
+	pci_write_config_dword(0, PCI_BRDGOPT2, 0x00000101);
+
+}
+#endif				/* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
+
+/*************************************************************************
+ *  pci_master_init
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT)
+void pci_master_init(struct pci_controller *hose)
+{
+	unsigned short temp_short;
+
+	/*--------------------------------------------------------------------------+
+	  | Write the PowerPC440 EP PCI Configuration regs.
+	  |   Enable PowerPC440 EP to be a master on the PCI bus (PMM).
+	  |   Enable PowerPC440 EP to act as a PCI memory target (PTM).
+	  +--------------------------------------------------------------------------*/
+	pci_read_config_word(0, PCI_COMMAND, &temp_short);
+	pci_write_config_word(0, PCI_COMMAND,
+			      temp_short | PCI_COMMAND_MASTER |
+			      PCI_COMMAND_MEMORY);
+}
+#endif				/* defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT) */
+
+/*************************************************************************
+ *  is_pci_host
+ *
+ *	This routine is called to determine if a pci scan should be
+ *	performed. With various hardware environments (especially cPCI and
+ *	PPMC) it's insufficient to depend on the state of the arbiter enable
+ *	bit in the strap register, or generic host/adapter assumptions.
+ *
+ *	Rather than hard-code a bad assumption in the general 440 code, the
+ *	440 pci code requires the board to decide at runtime.
+ *
+ *	Return 0 for adapter mode, non-zero for host (monarch) mode.
+ *
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI)
+int is_pci_host(struct pci_controller *hose)
+{
+	/* Cactus is always configured as host. */
+	return (1);
+}
+#endif				/* defined(CONFIG_PCI) */
+
+void hw_watchdog_reset(void)
+{
+	int val;
+
+	/*
+	 * Toggle watchdog output
+	 */
+	val = gpio_read_out_bit(CFG_GPIO_WATCHDOG) == 0 ? 1 : 0;
+	gpio_write_bit(CFG_GPIO_WATCHDOG, val);
+}

board/lwmon5/sdram.c

@@ -0,0 +1,662 @@
+/*
+ * (C) Copyright 2006
+ * Sylvie Gohl,		    AMCC/IBM, gohl.sylvie@fr.ibm.com
+ * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com
+ * Thierry Roman,	    AMCC/IBM, thierry_roman@fr.ibm.com
+ * Alain Saurel,	    AMCC/IBM, alain.saurel@fr.ibm.com
+ * Robert Snyder,	    AMCC/IBM, rob.snyder@fr.ibm.com
+ *
+ * (C) Copyright 2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* define DEBUG for debugging output (obviously ;-)) */
+#if 0
+#define DEBUG
+#endif
+
+#include <common.h>
+#include <asm/processor.h>
+#include <asm/mmu.h>
+#include <asm/io.h>
+#include <ppc440.h>
+
+#include "sdram.h"
+
+/*
+ * This DDR2 setup code can dynamically setup the TLB entries for the DDR2 memory
+ * region. Right now the cache should still be disabled in U-Boot because of the
+ * EMAC driver, that need it's buffer descriptor to be located in non cached
+ * memory.
+ *
+ * If at some time this restriction doesn't apply anymore, just define
+ * CFG_ENABLE_SDRAM_CACHE in the board config file and this code should setup
+ * everything correctly.
+ */
+#ifdef CFG_ENABLE_SDRAM_CACHE
+#define MY_TLB_WORD2_I_ENABLE	0			/* enable caching on SDRAM */
+#else
+#define MY_TLB_WORD2_I_ENABLE	TLB_WORD2_I_ENABLE	/* disable caching on SDRAM */
+#endif
+
+void program_tlb(u32 phys_addr, u32 virt_addr, u32 size, u32 tlb_word2_i_value);
+void dcbz_area(u32 start_address, u32 num_bytes);
+void dflush(void);
+
+#ifdef CONFIG_ADD_RAM_INFO
+static u32 is_ecc_enabled(void)
+{
+	u32 val;
+
+	mfsdram(DDR0_22, val);
+	val &= DDR0_22_CTRL_RAW_MASK;
+	if (val)
+		return 1;
+	else
+		return 0;
+}
+
+void board_add_ram_info(int use_default)
+{
+	PPC440_SYS_INFO board_cfg;
+	u32 val;
+
+	if (is_ecc_enabled())
+		puts(" (ECC");
+	else
+		puts(" (ECC not");
+
+	get_sys_info(&board_cfg);
+	printf(" enabled, %d MHz", (board_cfg.freqPLB * 2) / 1000000);
+
+	mfsdram(DDR0_03, val);
+	val = DDR0_03_CASLAT_DECODE(val);
+	printf(", CL%d)", val);
+}
+#endif
+
+static int wait_for_dlllock(void)
+{
+	u32 val;
+	int wait = 0;
+
+	/*
+	 * Wait for the DCC master delay line to finish calibration
+	 */
+	mtdcr(ddrcfga, DDR0_17);
+	val = DDR0_17_DLLLOCKREG_UNLOCKED;
+
+	while (wait != 0xffff) {
+		val = mfdcr(ddrcfgd);
+		if ((val & DDR0_17_DLLLOCKREG_MASK) == DDR0_17_DLLLOCKREG_LOCKED)
+			/* dlllockreg bit on */
+			return 0;
+		else
+			wait++;
+	}
+	debug("0x%04x: DDR0_17 Value (dlllockreg bit): 0x%08x\n", wait, val);
+	debug("Waiting for dlllockreg bit to raise\n");
+
+	return -1;
+}
+
+#if defined(CONFIG_DDR_DATA_EYE)
+int wait_for_dram_init_complete(void)
+{
+	u32 val;
+	int wait = 0;
+
+	/*
+	 * Wait for 'DRAM initialization complete' bit in status register
+	 */
+	mtdcr(ddrcfga, DDR0_00);
+
+	while (wait != 0xffff) {
+		val = mfdcr(ddrcfgd);
+		if ((val & DDR0_00_INT_STATUS_BIT6) == DDR0_00_INT_STATUS_BIT6)
+			/* 'DRAM initialization complete' bit */
+			return 0;
+		else
+			wait++;
+	}
+
+	debug("DRAM initialization complete bit in status register did not rise\n");
+
+	return -1;
+}
+
+#define NUM_TRIES 64
+#define NUM_READS 10
+
+void denali_core_search_data_eye(u32 start_addr, u32 memory_size)
+{
+	int k, j;
+	u32 val;
+	u32 wr_dqs_shift, dqs_out_shift, dll_dqs_delay_X;
+	u32 max_passing_cases = 0, wr_dqs_shift_with_max_passing_cases = 0;
+	u32 passing_cases = 0, dll_dqs_delay_X_sw_val = 0;
+	u32 dll_dqs_delay_X_start_window = 0, dll_dqs_delay_X_end_window = 0;
+	volatile u32 *ram_pointer;
+	u32 test[NUM_TRIES] = {
+		0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
+		0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
+		0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
+		0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
+		0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
+		0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
+		0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
+		0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
+		0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
+		0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
+		0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
+		0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
+		0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
+		0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
+		0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55,
+		0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55 };
+
+	ram_pointer = (volatile u32 *)start_addr;
+
+	for (wr_dqs_shift = 64; wr_dqs_shift < 96; wr_dqs_shift++) {
+		/*for (wr_dqs_shift=1; wr_dqs_shift<96; wr_dqs_shift++) {*/
+
+		/*
+		 * De-assert 'start' parameter.
+		 */
+		mtdcr(ddrcfga, DDR0_02);
+		val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_OFF;
+		mtdcr(ddrcfgd, val);
+
+		/*
+		 * Set 'wr_dqs_shift'
+		 */
+		mtdcr(ddrcfga, DDR0_09);
+		val = (mfdcr(ddrcfgd) & ~DDR0_09_WR_DQS_SHIFT_MASK)
+			| DDR0_09_WR_DQS_SHIFT_ENCODE(wr_dqs_shift);
+		mtdcr(ddrcfgd, val);
+
+		/*
+		 * Set 'dqs_out_shift' = wr_dqs_shift + 32
+		 */
+		dqs_out_shift = wr_dqs_shift + 32;
+		mtdcr(ddrcfga, DDR0_22);
+		val = (mfdcr(ddrcfgd) & ~DDR0_22_DQS_OUT_SHIFT_MASK)
+			| DDR0_22_DQS_OUT_SHIFT_ENCODE(dqs_out_shift);
+		mtdcr(ddrcfgd, val);
+
+		passing_cases = 0;
+
+		for (dll_dqs_delay_X = 1; dll_dqs_delay_X < 64; dll_dqs_delay_X++) {
+			/*for (dll_dqs_delay_X=1; dll_dqs_delay_X<128; dll_dqs_delay_X++) {*/
+			/*
+			 * Set 'dll_dqs_delay_X'.
+			 */
+			/* dll_dqs_delay_0 */
+			mtdcr(ddrcfga, DDR0_17);
+			val = (mfdcr(ddrcfgd) & ~DDR0_17_DLL_DQS_DELAY_0_MASK)
+				| DDR0_17_DLL_DQS_DELAY_0_ENCODE(dll_dqs_delay_X);
+			mtdcr(ddrcfgd, val);
+			/* dll_dqs_delay_1 to dll_dqs_delay_4 */
+			mtdcr(ddrcfga, DDR0_18);
+			val = (mfdcr(ddrcfgd) & ~DDR0_18_DLL_DQS_DELAY_X_MASK)
+				| DDR0_18_DLL_DQS_DELAY_4_ENCODE(dll_dqs_delay_X)
+				| DDR0_18_DLL_DQS_DELAY_3_ENCODE(dll_dqs_delay_X)
+				| DDR0_18_DLL_DQS_DELAY_2_ENCODE(dll_dqs_delay_X)
+				| DDR0_18_DLL_DQS_DELAY_1_ENCODE(dll_dqs_delay_X);
+			mtdcr(ddrcfgd, val);
+			/* dll_dqs_delay_5 to dll_dqs_delay_8 */
+			mtdcr(ddrcfga, DDR0_19);
+			val = (mfdcr(ddrcfgd) & ~DDR0_19_DLL_DQS_DELAY_X_MASK)
+				| DDR0_19_DLL_DQS_DELAY_8_ENCODE(dll_dqs_delay_X)
+				| DDR0_19_DLL_DQS_DELAY_7_ENCODE(dll_dqs_delay_X)
+				| DDR0_19_DLL_DQS_DELAY_6_ENCODE(dll_dqs_delay_X)
+				| DDR0_19_DLL_DQS_DELAY_5_ENCODE(dll_dqs_delay_X);
+			mtdcr(ddrcfgd, val);
+
+			ppcMsync();
+			ppcMbar();
+
+			/*
+			 * Assert 'start' parameter.
+			 */
+			mtdcr(ddrcfga, DDR0_02);
+			val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_ON;
+			mtdcr(ddrcfgd, val);
+
+			ppcMsync();
+			ppcMbar();
+
+			/*
+			 * Wait for the DCC master delay line to finish calibration
+			 */
+			if (wait_for_dlllock() != 0) {
+				printf("dlllock did not occur !!!\n");
+				printf("denali_core_search_data_eye!!!\n");
+				printf("wr_dqs_shift = %d - dll_dqs_delay_X = %d\n",
+				       wr_dqs_shift, dll_dqs_delay_X);
+				hang();
+			}
+			ppcMsync();
+			ppcMbar();
+
+			if (wait_for_dram_init_complete() != 0) {
+				printf("dram init complete did not occur !!!\n");
+				printf("denali_core_search_data_eye!!!\n");
+				printf("wr_dqs_shift = %d - dll_dqs_delay_X = %d\n",
+				       wr_dqs_shift, dll_dqs_delay_X);
+				hang();
+			}
+			udelay(100);  /* wait 100us to ensure init is really completed !!! */
+
+			/* write values */
+			for (j=0; j<NUM_TRIES; j++) {
+				ram_pointer[j] = test[j];
+
+				/* clear any cache at ram location */
+				__asm__("dcbf 0,%0": :"r" (&ram_pointer[j]));
+			}
+
+			/* read values back */
+			for (j=0; j<NUM_TRIES; j++) {
+				for (k=0; k<NUM_READS; k++) {
+					/* clear any cache at ram location */
+					__asm__("dcbf 0,%0": :"r" (&ram_pointer[j]));
+
+					if (ram_pointer[j] != test[j])
+						break;
+				}
+
+				/* read error */
+				if (k != NUM_READS)
+					break;
+			}
+
+			/* See if the dll_dqs_delay_X value passed.*/
+			if (j < NUM_TRIES) {
+				/* Failed */
+				passing_cases = 0;
+				/* break; */
+			} else {
+				/* Passed */
+				if (passing_cases == 0)
+					dll_dqs_delay_X_sw_val = dll_dqs_delay_X;
+				passing_cases++;
+				if (passing_cases >= max_passing_cases) {
+					max_passing_cases = passing_cases;
+					wr_dqs_shift_with_max_passing_cases = wr_dqs_shift;
+					dll_dqs_delay_X_start_window = dll_dqs_delay_X_sw_val;
+					dll_dqs_delay_X_end_window = dll_dqs_delay_X;
+				}
+			}
+
+			/*
+			 * De-assert 'start' parameter.
+			 */
+			mtdcr(ddrcfga, DDR0_02);
+			val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_OFF;
+			mtdcr(ddrcfgd, val);
+
+		} /* for (dll_dqs_delay_X=0; dll_dqs_delay_X<128; dll_dqs_delay_X++) */
+
+	} /* for (wr_dqs_shift=0; wr_dqs_shift<96; wr_dqs_shift++) */
+
+	/*
+	 * Largest passing window is now detected.
+	 */
+
+	/* Compute dll_dqs_delay_X value */
+	dll_dqs_delay_X = (dll_dqs_delay_X_end_window + dll_dqs_delay_X_start_window) / 2;
+	wr_dqs_shift = wr_dqs_shift_with_max_passing_cases;
+
+	debug("DQS calibration - Window detected:\n");
+	debug("max_passing_cases = %d\n", max_passing_cases);
+	debug("wr_dqs_shift	 = %d\n", wr_dqs_shift);
+	debug("dll_dqs_delay_X	 = %d\n", dll_dqs_delay_X);
+	debug("dll_dqs_delay_X window = %d - %d\n",
+	      dll_dqs_delay_X_start_window, dll_dqs_delay_X_end_window);
+
+	/*
+	 * De-assert 'start' parameter.
+	 */
+	mtdcr(ddrcfga, DDR0_02);
+	val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_OFF;
+	mtdcr(ddrcfgd, val);
+
+	/*
+	 * Set 'wr_dqs_shift'
+	 */
+	mtdcr(ddrcfga, DDR0_09);
+	val = (mfdcr(ddrcfgd) & ~DDR0_09_WR_DQS_SHIFT_MASK)
+		| DDR0_09_WR_DQS_SHIFT_ENCODE(wr_dqs_shift);
+	mtdcr(ddrcfgd, val);
+	debug("DDR0_09=0x%08lx\n", val);
+
+	/*
+	 * Set 'dqs_out_shift' = wr_dqs_shift + 32
+	 */
+	dqs_out_shift = wr_dqs_shift + 32;
+	mtdcr(ddrcfga, DDR0_22);
+	val = (mfdcr(ddrcfgd) & ~DDR0_22_DQS_OUT_SHIFT_MASK)
+		| DDR0_22_DQS_OUT_SHIFT_ENCODE(dqs_out_shift);
+	mtdcr(ddrcfgd, val);
+	debug("DDR0_22=0x%08lx\n", val);
+
+	/*
+	 * Set 'dll_dqs_delay_X'.
+	 */
+	/* dll_dqs_delay_0 */
+	mtdcr(ddrcfga, DDR0_17);
+	val = (mfdcr(ddrcfgd) & ~DDR0_17_DLL_DQS_DELAY_0_MASK)
+		| DDR0_17_DLL_DQS_DELAY_0_ENCODE(dll_dqs_delay_X);
+	mtdcr(ddrcfgd, val);
+	debug("DDR0_17=0x%08lx\n", val);
+
+	/* dll_dqs_delay_1 to dll_dqs_delay_4 */
+	mtdcr(ddrcfga, DDR0_18);
+	val = (mfdcr(ddrcfgd) & ~DDR0_18_DLL_DQS_DELAY_X_MASK)
+		| DDR0_18_DLL_DQS_DELAY_4_ENCODE(dll_dqs_delay_X)
+		| DDR0_18_DLL_DQS_DELAY_3_ENCODE(dll_dqs_delay_X)
+		| DDR0_18_DLL_DQS_DELAY_2_ENCODE(dll_dqs_delay_X)
+		| DDR0_18_DLL_DQS_DELAY_1_ENCODE(dll_dqs_delay_X);
+	mtdcr(ddrcfgd, val);
+	debug("DDR0_18=0x%08lx\n", val);
+
+	/* dll_dqs_delay_5 to dll_dqs_delay_8 */
+	mtdcr(ddrcfga, DDR0_19);
+	val = (mfdcr(ddrcfgd) & ~DDR0_19_DLL_DQS_DELAY_X_MASK)
+		| DDR0_19_DLL_DQS_DELAY_8_ENCODE(dll_dqs_delay_X)
+		| DDR0_19_DLL_DQS_DELAY_7_ENCODE(dll_dqs_delay_X)
+		| DDR0_19_DLL_DQS_DELAY_6_ENCODE(dll_dqs_delay_X)
+		| DDR0_19_DLL_DQS_DELAY_5_ENCODE(dll_dqs_delay_X);
+	mtdcr(ddrcfgd, val);
+	debug("DDR0_19=0x%08lx\n", val);
+
+	/*
+	 * Assert 'start' parameter.
+	 */
+	mtdcr(ddrcfga, DDR0_02);
+	val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_ON;
+	mtdcr(ddrcfgd, val);
+
+	ppcMsync();
+	ppcMbar();
+
+	/*
+	 * Wait for the DCC master delay line to finish calibration
+	 */
+	if (wait_for_dlllock() != 0) {
+		printf("dlllock did not occur !!!\n");
+		hang();
+	}
+	ppcMsync();
+	ppcMbar();
+
+	if (wait_for_dram_init_complete() != 0) {
+		printf("dram init complete did not occur !!!\n");
+		hang();
+	}
+	udelay(100);  /* wait 100us to ensure init is really completed !!! */
+}
+#endif /* CONFIG_DDR_DATA_EYE */
+
+#ifdef CONFIG_DDR_ECC
+static void wait_ddr_idle(void)
+{
+	/*
+	 * Controller idle status cannot be determined for Denali
+	 * DDR2 code. Just return here.
+	 */
+}
+
+static void blank_string(int size)
+{
+	int i;
+
+	for (i=0; i<size; i++)
+		putc('\b');
+	for (i=0; i<size; i++)
+		putc(' ');
+	for (i=0; i<size; i++)
+		putc('\b');
+}
+
+static void program_ecc(u32 start_address,
+			u32 num_bytes,
+			u32 tlb_word2_i_value)
+{
+	u32 current_address;
+	u32 end_address;
+	u32 address_increment;
+	u32 val;
+	char str[] = "ECC generation -";
+	char slash[] = "\\|/-\\|/-";
+	int loop = 0;
+	int loopi = 0;
+
+	current_address = start_address;
+
+	sync();
+	eieio();
+	wait_ddr_idle();
+
+	if (tlb_word2_i_value == TLB_WORD2_I_ENABLE) {
+		/* ECC bit set method for non-cached memory */
+		address_increment = 4;
+		end_address = current_address + num_bytes;
+
+		puts(str);
+
+		while (current_address < end_address) {
+			*((u32 *)current_address) = 0x00000000;
+			current_address += address_increment;
+
+			if ((loop++ % (2 << 20)) == 0) {
+				putc('\b');
+				putc(slash[loopi++ % 8]);
+			}
+		}
+
+		blank_string(strlen(str));
+	} else {
+		/* ECC bit set method for cached memory */
+#if 1 /* test-only: will remove this define later, when ECC problems are solved! */
+		/*
+		 * Some boards (like lwmon5) need to preserve the memory
+		 * content upon ECC generation (for the log-buffer).
+		 * Therefore we don't fill the memory with a pattern or
+		 * just zero it, but write the same values back that are
+		 * already in the memory cells.
+		 */
+		address_increment = CFG_CACHELINE_SIZE;
+		end_address = current_address + num_bytes;
+
+		current_address = start_address;
+		while (current_address < end_address) {
+			ppcDcbi(current_address);
+			ppcDcbf(current_address);
+			current_address += CFG_CACHELINE_SIZE;
+		}
+#else
+		dcbz_area(start_address, num_bytes);
+		dflush();
+#endif
+	}
+
+	sync();
+	eieio();
+	wait_ddr_idle();
+
+	/* Clear error status */
+	mfsdram(DDR0_00, val);
+	mtsdram(DDR0_00, val | DDR0_00_INT_ACK_ALL);
+
+	/* Set 'int_mask' parameter to functionnal value */
+	mfsdram(DDR0_01, val);
+	mtsdram(DDR0_01, ((val &~ DDR0_01_INT_MASK_MASK) | DDR0_01_INT_MASK_ALL_OFF));
+
+	sync();
+	eieio();
+	wait_ddr_idle();
+}
+#endif
+
+static __inline__ u32 get_mcsr(void)
+{
+	u32 val;
+
+	asm volatile("mfspr %0, 0x23c" : "=r" (val) :);
+	return val;
+}
+
+static __inline__ void set_mcsr(u32 val)
+{
+	asm volatile("mtspr 0x23c, %0" : "=r" (val) :);
+}
+
+/*************************************************************************
+ *
+ * initdram -- 440EPx's DDR controller is a DENALI Core
+ *
+ ************************************************************************/
+long int initdram (int board_type)
+{
+	u32 val;
+
+#if 0 /* test-only: will remove this define later, when ECC problems are solved! */
+	/* CL=3 */
+	mtsdram(DDR0_02, 0x00000000);
+
+	mtsdram(DDR0_00, 0x0000190A);
+	mtsdram(DDR0_01, 0x01000000);
+	mtsdram(DDR0_03, 0x02030603); /* A suitable burst length was taken. CAS is right for our board */
+
+	mtsdram(DDR0_04, 0x0A030300);
+	mtsdram(DDR0_05, 0x02020308);
+	mtsdram(DDR0_06, 0x0103C812);
+	mtsdram(DDR0_07, 0x00090100);
+	mtsdram(DDR0_08, 0x02c80001);
+	mtsdram(DDR0_09, 0x00011D5F);
+	mtsdram(DDR0_10, 0x00000300);
+	mtsdram(DDR0_11, 0x000CC800);
+	mtsdram(DDR0_12, 0x00000003);
+	mtsdram(DDR0_14, 0x00000000);
+	mtsdram(DDR0_17, 0x1e000000);
+	mtsdram(DDR0_18, 0x1e1e1e1e);
+	mtsdram(DDR0_19, 0x1e1e1e1e);
+	mtsdram(DDR0_20, 0x0B0B0B0B);
+	mtsdram(DDR0_21, 0x0B0B0B0B);
+#ifdef CONFIG_DDR_ECC
+	mtsdram(DDR0_22, 0x00267F0B | DDR0_22_CTRL_RAW_ECC_ENABLE); /* enable ECC	*/
+#else
+	mtsdram(DDR0_22, 0x00267F0B);
+#endif
+
+	mtsdram(DDR0_23, 0x01000000);
+	mtsdram(DDR0_24, 0x01010001);
+
+	mtsdram(DDR0_26, 0x2D93028A);
+	mtsdram(DDR0_27, 0x0784682B);
+
+	mtsdram(DDR0_28, 0x00000080);
+	mtsdram(DDR0_31, 0x00000000);
+	mtsdram(DDR0_42, 0x01000006);
+
+	mtsdram(DDR0_43, 0x030A0200);
+	mtsdram(DDR0_44, 0x00000003);
+	mtsdram(DDR0_02, 0x00000001); /* Activate the denali core */
+#else
+	/* CL=4 */
+	mtsdram(DDR0_02, 0x00000000);
+
+	mtsdram(DDR0_00, 0x0000190A);
+	mtsdram(DDR0_01, 0x01000000);
+	mtsdram(DDR0_03, 0x02040803); /* A suitable burst length was taken. CAS is right for our board */
+
+	mtsdram(DDR0_04, 0x0B030300);
+	mtsdram(DDR0_05, 0x02020308);
+	mtsdram(DDR0_06, 0x0003C812);
+	mtsdram(DDR0_07, 0x00090100);
+	mtsdram(DDR0_08, 0x03c80001);
+	mtsdram(DDR0_09, 0x00011D5F);
+	mtsdram(DDR0_10, 0x00000300);
+	mtsdram(DDR0_11, 0x000CC800);
+	mtsdram(DDR0_12, 0x00000003);
+	mtsdram(DDR0_14, 0x00000000);
+	mtsdram(DDR0_17, 0x1e000000);
+	mtsdram(DDR0_18, 0x1e1e1e1e);
+	mtsdram(DDR0_19, 0x1e1e1e1e);
+	mtsdram(DDR0_20, 0x0B0B0B0B);
+	mtsdram(DDR0_21, 0x0B0B0B0B);
+#ifdef CONFIG_DDR_ECC
+	mtsdram(DDR0_22, 0x00267F0B | DDR0_22_CTRL_RAW_ECC_ENABLE); /* enable ECC       */
+#else
+	mtsdram(DDR0_22, 0x00267F0B);
+#endif
+
+	mtsdram(DDR0_23, 0x01000000);
+	mtsdram(DDR0_24, 0x01010001);
+
+	mtsdram(DDR0_26, 0x2D93028A);
+	mtsdram(DDR0_27, 0x0784682B);
+
+	mtsdram(DDR0_28, 0x00000080);
+	mtsdram(DDR0_31, 0x00000000);
+	mtsdram(DDR0_42, 0x01000008);
+
+	mtsdram(DDR0_43, 0x050A0200);
+	mtsdram(DDR0_44, 0x00000005);
+	mtsdram(DDR0_02, 0x00000001); /* Activate the denali core */
+#endif
+
+	wait_for_dlllock();
+
+	/*
+	 * Program tlb entries for this size (dynamic)
+	 */
+	program_tlb(0, 0, CFG_MBYTES_SDRAM << 20, MY_TLB_WORD2_I_ENABLE);
+
+	/*
+	 * Setup 2nd TLB with same physical address but different virtual address
+	 * with cache enabled. This is done for fast ECC generation.
+	 */
+	program_tlb(0, CFG_DDR_CACHED_ADDR, CFG_MBYTES_SDRAM << 20, 0);
+
+#ifdef CONFIG_DDR_DATA_EYE
+	/*
+	 * Perform data eye search if requested.
+	 */
+	denali_core_search_data_eye(CFG_DDR_CACHED_ADDR, CFG_MBYTES_SDRAM << 20);
+
+	/*
+	 * Clear possible errors resulting from data-eye-search.
+	 * If not done, then we could get an interrupt later on when
+	 * exceptions are enabled.
+	 */
+	val = get_mcsr();
+	set_mcsr(val);
+#endif
+
+#ifdef CONFIG_DDR_ECC
+	/*
+	 * If ECC is enabled, initialize the parity bits.
+	 */
+	program_ecc(CFG_DDR_CACHED_ADDR, CFG_MBYTES_SDRAM << 20, 0);
+#endif
+
+	return (CFG_MBYTES_SDRAM << 20);
+}

board/lwmon5/sdram.h

@@ -0,0 +1,505 @@
+/*
+ * (C) Copyright 2006
+ * Sylvie Gohl,             AMCC/IBM, gohl.sylvie@fr.ibm.com
+ * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com
+ * Thierry Roman,           AMCC/IBM, thierry_roman@fr.ibm.com
+ * Alain Saurel,            AMCC/IBM, alain.saurel@fr.ibm.com
+ * Robert Snyder,           AMCC/IBM, rob.snyder@fr.ibm.com
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _SPD_SDRAM_DENALI_H_
+#define _SPD_SDRAM_DENALI_H_
+
+#define ppcMsync	sync
+#define ppcMbar		eieio
+
+/* General definitions */
+#define MAX_SPD_BYTE        128         /* highest SPD byte # to read */
+#define DENALI_REG_NUMBER   45          /* 45 Regs in PPC440EPx Denali Core */
+#define SUPPORTED_DIMMS_NB  7           /* Number of supported DIMM modules types */
+#define SDRAM_NONE          0           /* No DIMM detected in Slot */
+#define MAXRANKS            2           /* 2 ranks maximum */
+
+/* Supported PLB Frequencies */
+#define PLB_FREQ_133MHZ     133333333
+#define PLB_FREQ_152MHZ     152000000
+#define PLB_FREQ_160MHZ     160000000
+#define PLB_FREQ_166MHZ     166666666
+
+/* Denali Core Registers */
+#define SDRAM_DCR_BASE 0x10
+
+#define DDR_DCR_BASE 0x10
+#define ddrcfga  (DDR_DCR_BASE+0x0)   /* DDR configuration address reg */
+#define ddrcfgd  (DDR_DCR_BASE+0x1)   /* DDR configuration data reg    */
+
+/*-----------------------------------------------------------------------------+
+  | Values for ddrcfga register - indirect addressing of these regs
+  +-----------------------------------------------------------------------------*/
+
+#define DDR0_00                         0x00
+#define DDR0_00_INT_ACK_MASK              0x7F000000 /* Write only */
+#define DDR0_00_INT_ACK_ALL               0x7F000000
+#define DDR0_00_INT_ACK_ENCODE(n)           ((((unsigned long)(n))&0x7F)<<24)
+#define DDR0_00_INT_ACK_DECODE(n)           ((((unsigned long)(n))>>24)&0x7F)
+/* Status */
+#define DDR0_00_INT_STATUS_MASK           0x00FF0000 /* Read only */
+/* Bit0. A single access outside the defined PHYSICAL memory space detected. */
+#define DDR0_00_INT_STATUS_BIT0           0x00010000
+/* Bit1. Multiple accesses outside the defined PHYSICAL memory space detected. */
+#define DDR0_00_INT_STATUS_BIT1           0x00020000
+/* Bit2. Single correctable ECC event detected */
+#define DDR0_00_INT_STATUS_BIT2           0x00040000
+/* Bit3. Multiple correctable ECC events detected. */
+#define DDR0_00_INT_STATUS_BIT3           0x00080000
+/* Bit4. Single uncorrectable ECC event detected. */
+#define DDR0_00_INT_STATUS_BIT4           0x00100000
+/* Bit5. Multiple uncorrectable ECC events detected. */
+#define DDR0_00_INT_STATUS_BIT5           0x00200000
+/* Bit6. DRAM initialization complete. */
+#define DDR0_00_INT_STATUS_BIT6           0x00400000
+/* Bit7. Logical OR of all lower bits. */
+#define DDR0_00_INT_STATUS_BIT7           0x00800000
+
+#define DDR0_00_INT_STATUS_ENCODE(n)        ((((unsigned long)(n))&0xFF)<<16)
+#define DDR0_00_INT_STATUS_DECODE(n)        ((((unsigned long)(n))>>16)&0xFF)
+#define DDR0_00_DLL_INCREMENT_MASK        0x00007F00
+#define DDR0_00_DLL_INCREMENT_ENCODE(n)     ((((unsigned long)(n))&0x7F)<<8)
+#define DDR0_00_DLL_INCREMENT_DECODE(n)     ((((unsigned long)(n))>>8)&0x7F)
+#define DDR0_00_DLL_START_POINT_MASK      0x0000007F
+#define DDR0_00_DLL_START_POINT_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<0)
+#define DDR0_00_DLL_START_POINT_DECODE(n)   ((((unsigned long)(n))>>0)&0x7F)
+
+
+#define DDR0_01                         0x01
+#define DDR0_01_PLB0_DB_CS_LOWER_MASK     0x1F000000
+#define DDR0_01_PLB0_DB_CS_LOWER_ENCODE(n)  ((((unsigned long)(n))&0x1F)<<24)
+#define DDR0_01_PLB0_DB_CS_LOWER_DECODE(n)  ((((unsigned long)(n))>>24)&0x1F)
+#define DDR0_01_PLB0_DB_CS_UPPER_MASK     0x001F0000
+#define DDR0_01_PLB0_DB_CS_UPPER_ENCODE(n)  ((((unsigned long)(n))&0x1F)<<16)
+#define DDR0_01_PLB0_DB_CS_UPPER_DECODE(n)  ((((unsigned long)(n))>>16)&0x1F)
+#define DDR0_01_OUT_OF_RANGE_TYPE_MASK    0x00000700 /* Read only */
+#define DDR0_01_OUT_OF_RANGE_TYPE_ENCODE(n)               ((((unsigned long)(n))&0x7)<<8)
+#define DDR0_01_OUT_OF_RANGE_TYPE_DECODE(n)               ((((unsigned long)(n))>>8)&0x7)
+#define DDR0_01_INT_MASK_MASK             0x000000FF
+#define DDR0_01_INT_MASK_ENCODE(n)          ((((unsigned long)(n))&0xFF)<<0)
+#define DDR0_01_INT_MASK_DECODE(n)          ((((unsigned long)(n))>>0)&0xFF)
+#define DDR0_01_INT_MASK_ALL_ON           0x000000FF
+#define DDR0_01_INT_MASK_ALL_OFF          0x00000000
+
+#define DDR0_02                         0x02
+#define DDR0_02_MAX_CS_REG_MASK           0x02000000 /* Read only */
+#define DDR0_02_MAX_CS_REG_ENCODE(n)        ((((unsigned long)(n))&0x2)<<24)
+#define DDR0_02_MAX_CS_REG_DECODE(n)        ((((unsigned long)(n))>>24)&0x2)
+#define DDR0_02_MAX_COL_REG_MASK          0x000F0000 /* Read only */
+#define DDR0_02_MAX_COL_REG_ENCODE(n)       ((((unsigned long)(n))&0xF)<<16)
+#define DDR0_02_MAX_COL_REG_DECODE(n)       ((((unsigned long)(n))>>16)&0xF)
+#define DDR0_02_MAX_ROW_REG_MASK          0x00000F00 /* Read only */
+#define DDR0_02_MAX_ROW_REG_ENCODE(n)       ((((unsigned long)(n))&0xF)<<8)
+#define DDR0_02_MAX_ROW_REG_DECODE(n)       ((((unsigned long)(n))>>8)&0xF)
+#define DDR0_02_START_MASK                0x00000001
+#define DDR0_02_START_ENCODE(n)             ((((unsigned long)(n))&0x1)<<0)
+#define DDR0_02_START_DECODE(n)             ((((unsigned long)(n))>>0)&0x1)
+#define DDR0_02_START_OFF                 0x00000000
+#define DDR0_02_START_ON                  0x00000001
+
+#define DDR0_03                         0x03
+#define DDR0_03_BSTLEN_MASK               0x07000000
+#define DDR0_03_BSTLEN_ENCODE(n)            ((((unsigned long)(n))&0x7)<<24)
+#define DDR0_03_BSTLEN_DECODE(n)            ((((unsigned long)(n))>>24)&0x7)
+#define DDR0_03_CASLAT_MASK               0x00070000
+#define DDR0_03_CASLAT_ENCODE(n)            ((((unsigned long)(n))&0x7)<<16)
+#define DDR0_03_CASLAT_DECODE(n)            ((((unsigned long)(n))>>16)&0x7)
+#define DDR0_03_CASLAT_LIN_MASK           0x00000F00
+#define DDR0_03_CASLAT_LIN_ENCODE(n)        ((((unsigned long)(n))&0xF)<<8)
+#define DDR0_03_CASLAT_LIN_DECODE(n)        ((((unsigned long)(n))>>8)&0xF)
+#define DDR0_03_INITAREF_MASK             0x0000000F
+#define DDR0_03_INITAREF_ENCODE(n)          ((((unsigned long)(n))&0xF)<<0)
+#define DDR0_03_INITAREF_DECODE(n)          ((((unsigned long)(n))>>0)&0xF)
+
+#define DDR0_04                         0x04
+#define DDR0_04_TRC_MASK                  0x1F000000
+#define DDR0_04_TRC_ENCODE(n)               ((((unsigned long)(n))&0x1F)<<24)
+#define DDR0_04_TRC_DECODE(n)               ((((unsigned long)(n))>>24)&0x1F)
+#define DDR0_04_TRRD_MASK                 0x00070000
+#define DDR0_04_TRRD_ENCODE(n)              ((((unsigned long)(n))&0x7)<<16)
+#define DDR0_04_TRRD_DECODE(n)              ((((unsigned long)(n))>>16)&0x7)
+#define DDR0_04_TRTP_MASK                 0x00000700
+#define DDR0_04_TRTP_ENCODE(n)              ((((unsigned long)(n))&0x7)<<8)
+#define DDR0_04_TRTP_DECODE(n)              ((((unsigned long)(n))>>8)&0x7)
+
+#define DDR0_05                         0x05
+#define DDR0_05_TMRD_MASK                 0x1F000000
+#define DDR0_05_TMRD_ENCODE(n)              ((((unsigned long)(n))&0x1F)<<24)
+#define DDR0_05_TMRD_DECODE(n)              ((((unsigned long)(n))>>24)&0x1F)
+#define DDR0_05_TEMRS_MASK                0x00070000
+#define DDR0_05_TEMRS_ENCODE(n)             ((((unsigned long)(n))&0x7)<<16)
+#define DDR0_05_TEMRS_DECODE(n)             ((((unsigned long)(n))>>16)&0x7)
+#define DDR0_05_TRP_MASK                  0x00000F00
+#define DDR0_05_TRP_ENCODE(n)               ((((unsigned long)(n))&0xF)<<8)
+#define DDR0_05_TRP_DECODE(n)               ((((unsigned long)(n))>>8)&0xF)
+#define DDR0_05_TRAS_MIN_MASK             0x000000FF
+#define DDR0_05_TRAS_MIN_ENCODE(n)          ((((unsigned long)(n))&0xFF)<<0)
+#define DDR0_05_TRAS_MIN_DECODE(n)          ((((unsigned long)(n))>>0)&0xFF)
+
+#define DDR0_06                         0x06
+#define DDR0_06_WRITEINTERP_MASK          0x01000000
+#define DDR0_06_WRITEINTERP_ENCODE(n)       ((((unsigned long)(n))&0x1)<<24)
+#define DDR0_06_WRITEINTERP_DECODE(n)       ((((unsigned long)(n))>>24)&0x1)
+#define DDR0_06_TWTR_MASK                 0x00070000
+#define DDR0_06_TWTR_ENCODE(n)              ((((unsigned long)(n))&0x7)<<16)
+#define DDR0_06_TWTR_DECODE(n)              ((((unsigned long)(n))>>16)&0x7)
+#define DDR0_06_TDLL_MASK                 0x0000FF00
+#define DDR0_06_TDLL_ENCODE(n)              ((((unsigned long)(n))&0xFF)<<8)
+#define DDR0_06_TDLL_DECODE(n)              ((((unsigned long)(n))>>8)&0xFF)
+#define DDR0_06_TRFC_MASK                 0x0000007F
+#define DDR0_06_TRFC_ENCODE(n)              ((((unsigned long)(n))&0x7F)<<0)
+#define DDR0_06_TRFC_DECODE(n)              ((((unsigned long)(n))>>0)&0x7F)
+
+#define DDR0_07                         0x07
+#define DDR0_07_NO_CMD_INIT_MASK          0x01000000
+#define DDR0_07_NO_CMD_INIT_ENCODE(n)       ((((unsigned long)(n))&0x1)<<24)
+#define DDR0_07_NO_CMD_INIT_DECODE(n)       ((((unsigned long)(n))>>24)&0x1)
+#define DDR0_07_TFAW_MASK                 0x001F0000
+#define DDR0_07_TFAW_ENCODE(n)              ((((unsigned long)(n))&0x1F)<<16)
+#define DDR0_07_TFAW_DECODE(n)              ((((unsigned long)(n))>>16)&0x1F)
+#define DDR0_07_AUTO_REFRESH_MODE_MASK    0x00000100
+#define DDR0_07_AUTO_REFRESH_MODE_ENCODE(n) ((((unsigned long)(n))&0x1)<<8)
+#define DDR0_07_AUTO_REFRESH_MODE_DECODE(n) ((((unsigned long)(n))>>8)&0x1)
+#define DDR0_07_AREFRESH_MASK             0x00000001
+#define DDR0_07_AREFRESH_ENCODE(n)          ((((unsigned long)(n))&0x1)<<0)
+#define DDR0_07_AREFRESH_DECODE(n)          ((((unsigned long)(n))>>0)&0x1)
+
+#define DDR0_08                         0x08
+#define DDR0_08_WRLAT_MASK                0x07000000
+#define DDR0_08_WRLAT_ENCODE(n)             ((((unsigned long)(n))&0x7)<<24)
+#define DDR0_08_WRLAT_DECODE(n)             ((((unsigned long)(n))>>24)&0x7)
+#define DDR0_08_TCPD_MASK                 0x00FF0000
+#define DDR0_08_TCPD_ENCODE(n)              ((((unsigned long)(n))&0xFF)<<16)
+#define DDR0_08_TCPD_DECODE(n)              ((((unsigned long)(n))>>16)&0xFF)
+#define DDR0_08_DQS_N_EN_MASK             0x00000100
+#define DDR0_08_DQS_N_EN_ENCODE(n)          ((((unsigned long)(n))&0x1)<<8)
+#define DDR0_08_DQS_N_EN_DECODE(n)          ((((unsigned long)(n))>>8)&0x1)
+#define DDR0_08_DDRII_SDRAM_MODE_MASK     0x00000001
+#define DDR0_08_DDRII_ENCODE(n)             ((((unsigned long)(n))&0x1)<<0)
+#define DDR0_08_DDRII_DECODE(n)             ((((unsigned long)(n))>>0)&0x1)
+
+#define DDR0_09                         0x09
+#define DDR0_09_OCD_ADJUST_PDN_CS_0_MASK  0x1F000000
+#define DDR0_09_OCD_ADJUST_PDN_CS_0_ENCODE(n) ((((unsigned long)(n))&0x1F)<<24)
+#define DDR0_09_OCD_ADJUST_PDN_CS_0_DECODE(n) ((((unsigned long)(n))>>24)&0x1F)
+#define DDR0_09_RTT_0_MASK                0x00030000
+#define DDR0_09_RTT_0_ENCODE(n)             ((((unsigned long)(n))&0x3)<<16)
+#define DDR0_09_RTT_0_DECODE(n)             ((((unsigned long)(n))>>16)&0x3)
+#define DDR0_09_WR_DQS_SHIFT_BYPASS_MASK  0x00007F00
+#define DDR0_09_WR_DQS_SHIFT_BYPASS_ENCODE(n) ((((unsigned long)(n))&0x7F)<<8)
+#define DDR0_09_WR_DQS_SHIFT_BYPASS_DECODE(n) ((((unsigned long)(n))>>8)&0x7F)
+#define DDR0_09_WR_DQS_SHIFT_MASK         0x0000007F
+#define DDR0_09_WR_DQS_SHIFT_ENCODE(n)      ((((unsigned long)(n))&0x7F)<<0)
+#define DDR0_09_WR_DQS_SHIFT_DECODE(n)      ((((unsigned long)(n))>>0)&0x7F)
+
+#define DDR0_10                         0x0A
+#define DDR0_10_WRITE_MODEREG_MASK        0x00010000 /* Write only */
+#define DDR0_10_WRITE_MODEREG_ENCODE(n)     ((((unsigned long)(n))&0x1)<<16)
+#define DDR0_10_WRITE_MODEREG_DECODE(n)     ((((unsigned long)(n))>>16)&0x1)
+#define DDR0_10_CS_MAP_MASK               0x00000300
+#define DDR0_10_CS_MAP_NO_MEM             0x00000000
+#define DDR0_10_CS_MAP_RANK0_INSTALLED    0x00000100
+#define DDR0_10_CS_MAP_RANK1_INSTALLED    0x00000200
+#define DDR0_10_CS_MAP_ENCODE(n)            ((((unsigned long)(n))&0x3)<<8)
+#define DDR0_10_CS_MAP_DECODE(n)            ((((unsigned long)(n))>>8)&0x3)
+#define DDR0_10_OCD_ADJUST_PUP_CS_0_MASK  0x0000001F
+#define DDR0_10_OCD_ADJUST_PUP_CS_0_ENCODE(n) ((((unsigned long)(n))&0x1F)<<0)
+#define DDR0_10_OCD_ADJUST_PUP_CS_0_DECODE(n) ((((unsigned long)(n))>>0)&0x1F)
+
+#define DDR0_11                         0x0B
+#define DDR0_11_SREFRESH_MASK             0x01000000
+#define DDR0_11_SREFRESH_ENCODE(n)          ((((unsigned long)(n))&0x1)<<24)
+#define DDR0_11_SREFRESH_DECODE(n)          ((((unsigned long)(n))>>24)&0x1F)
+#define DDR0_11_TXSNR_MASK                0x00FF0000
+#define DDR0_11_TXSNR_ENCODE(n)             ((((unsigned long)(n))&0xFF)<<16)
+#define DDR0_11_TXSNR_DECODE(n)             ((((unsigned long)(n))>>16)&0xFF)
+#define DDR0_11_TXSR_MASK                 0x0000FF00
+#define DDR0_11_TXSR_ENCODE(n)              ((((unsigned long)(n))&0xFF)<<8)
+#define DDR0_11_TXSR_DECODE(n)              ((((unsigned long)(n))>>8)&0xFF)
+
+#define DDR0_12                         0x0C
+#define DDR0_12_TCKE_MASK                 0x0000007
+#define DDR0_12_TCKE_ENCODE(n)              ((((unsigned long)(n))&0x7)<<0)
+#define DDR0_12_TCKE_DECODE(n)              ((((unsigned long)(n))>>0)&0x7)
+
+#define DDR0_13                         0x0D
+
+#define DDR0_14                         0x0E
+#define DDR0_14_DLL_BYPASS_MODE_MASK      0x01000000
+#define DDR0_14_DLL_BYPASS_MODE_ENCODE(n)   ((((unsigned long)(n))&0x1)<<24)
+#define DDR0_14_DLL_BYPASS_MODE_DECODE(n)   ((((unsigned long)(n))>>24)&0x1)
+#define DDR0_14_REDUC_MASK                0x00010000
+#define DDR0_14_REDUC_64BITS              0x00000000
+#define DDR0_14_REDUC_32BITS              0x00010000
+#define DDR0_14_REDUC_ENCODE(n)             ((((unsigned long)(n))&0x1)<<16)
+#define DDR0_14_REDUC_DECODE(n)             ((((unsigned long)(n))>>16)&0x1)
+#define DDR0_14_REG_DIMM_ENABLE_MASK      0x00000100
+#define DDR0_14_REG_DIMM_ENABLE_ENCODE(n)   ((((unsigned long)(n))&0x1)<<8)
+#define DDR0_14_REG_DIMM_ENABLE_DECODE(n)   ((((unsigned long)(n))>>8)&0x1)
+
+#define DDR0_15                         0x0F
+
+#define DDR0_16                         0x10
+
+#define DDR0_17                         0x11
+#define DDR0_17_DLL_DQS_DELAY_0_MASK      0x7F000000
+#define DDR0_17_DLL_DQS_DELAY_0_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<24)
+#define DDR0_17_DLL_DQS_DELAY_0_DECODE(n)   ((((unsigned long)(n))>>24)&0x7F)
+#define DDR0_17_DLLLOCKREG_MASK           0x00010000 /* Read only */
+#define DDR0_17_DLLLOCKREG_LOCKED         0x00010000
+#define DDR0_17_DLLLOCKREG_UNLOCKED       0x00000000
+#define DDR0_17_DLLLOCKREG_ENCODE(n)        ((((unsigned long)(n))&0x1)<<16)
+#define DDR0_17_DLLLOCKREG_DECODE(n)        ((((unsigned long)(n))>>16)&0x1)
+#define DDR0_17_DLL_LOCK_MASK             0x00007F00 /* Read only */
+#define DDR0_17_DLL_LOCK_ENCODE(n)          ((((unsigned long)(n))&0x7F)<<8)
+#define DDR0_17_DLL_LOCK_DECODE(n)          ((((unsigned long)(n))>>8)&0x7F)
+
+#define DDR0_18                         0x12
+#define DDR0_18_DLL_DQS_DELAY_X_MASK      0x7F7F7F7F
+#define DDR0_18_DLL_DQS_DELAY_4_MASK      0x7F000000
+#define DDR0_18_DLL_DQS_DELAY_4_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<24)
+#define DDR0_18_DLL_DQS_DELAY_4_DECODE(n)   ((((unsigned long)(n))>>24)&0x7F)
+#define DDR0_18_DLL_DQS_DELAY_3_MASK      0x007F0000
+#define DDR0_18_DLL_DQS_DELAY_3_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<16)
+#define DDR0_18_DLL_DQS_DELAY_3_DECODE(n)   ((((unsigned long)(n))>>16)&0x7F)
+#define DDR0_18_DLL_DQS_DELAY_2_MASK      0x00007F00
+#define DDR0_18_DLL_DQS_DELAY_2_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<8)
+#define DDR0_18_DLL_DQS_DELAY_2_DECODE(n)   ((((unsigned long)(n))>>8)&0x7F)
+#define DDR0_18_DLL_DQS_DELAY_1_MASK      0x0000007F
+#define DDR0_18_DLL_DQS_DELAY_1_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<0)
+#define DDR0_18_DLL_DQS_DELAY_1_DECODE(n)   ((((unsigned long)(n))>>0)&0x7F)
+
+#define DDR0_19                         0x13
+#define DDR0_19_DLL_DQS_DELAY_X_MASK      0x7F7F7F7F
+#define DDR0_19_DLL_DQS_DELAY_8_MASK      0x7F000000
+#define DDR0_19_DLL_DQS_DELAY_8_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<24)
+#define DDR0_19_DLL_DQS_DELAY_8_DECODE(n)   ((((unsigned long)(n))>>24)&0x7F)
+#define DDR0_19_DLL_DQS_DELAY_7_MASK      0x007F0000
+#define DDR0_19_DLL_DQS_DELAY_7_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<16)
+#define DDR0_19_DLL_DQS_DELAY_7_DECODE(n)   ((((unsigned long)(n))>>16)&0x7F)
+#define DDR0_19_DLL_DQS_DELAY_6_MASK      0x00007F00
+#define DDR0_19_DLL_DQS_DELAY_6_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<8)
+#define DDR0_19_DLL_DQS_DELAY_6_DECODE(n)   ((((unsigned long)(n))>>8)&0x7F)
+#define DDR0_19_DLL_DQS_DELAY_5_MASK      0x0000007F
+#define DDR0_19_DLL_DQS_DELAY_5_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<0)
+#define DDR0_19_DLL_DQS_DELAY_5_DECODE(n)   ((((unsigned long)(n))>>0)&0x7F)
+
+#define DDR0_20                         0x14
+#define DDR0_20_DLL_DQS_BYPASS_3_MASK      0x7F000000
+#define DDR0_20_DLL_DQS_BYPASS_3_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<24)
+#define DDR0_20_DLL_DQS_BYPASS_3_DECODE(n)   ((((unsigned long)(n))>>24)&0x7F)
+#define DDR0_20_DLL_DQS_BYPASS_2_MASK      0x007F0000
+#define DDR0_20_DLL_DQS_BYPASS_2_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<16)
+#define DDR0_20_DLL_DQS_BYPASS_2_DECODE(n)   ((((unsigned long)(n))>>16)&0x7F)
+#define DDR0_20_DLL_DQS_BYPASS_1_MASK      0x00007F00
+#define DDR0_20_DLL_DQS_BYPASS_1_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<8)
+#define DDR0_20_DLL_DQS_BYPASS_1_DECODE(n)   ((((unsigned long)(n))>>8)&0x7F)
+#define DDR0_20_DLL_DQS_BYPASS_0_MASK      0x0000007F
+#define DDR0_20_DLL_DQS_BYPASS_0_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<0)
+#define DDR0_20_DLL_DQS_BYPASS_0_DECODE(n)   ((((unsigned long)(n))>>0)&0x7F)
+
+#define DDR0_21                         0x15
+#define DDR0_21_DLL_DQS_BYPASS_7_MASK      0x7F000000
+#define DDR0_21_DLL_DQS_BYPASS_7_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<24)
+#define DDR0_21_DLL_DQS_BYPASS_7_DECODE(n)   ((((unsigned long)(n))>>24)&0x7F)
+#define DDR0_21_DLL_DQS_BYPASS_6_MASK      0x007F0000
+#define DDR0_21_DLL_DQS_BYPASS_6_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<16)
+#define DDR0_21_DLL_DQS_BYPASS_6_DECODE(n)   ((((unsigned long)(n))>>16)&0x7F)
+#define DDR0_21_DLL_DQS_BYPASS_5_MASK      0x00007F00
+#define DDR0_21_DLL_DQS_BYPASS_5_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<8)
+#define DDR0_21_DLL_DQS_BYPASS_5_DECODE(n)   ((((unsigned long)(n))>>8)&0x7F)
+#define DDR0_21_DLL_DQS_BYPASS_4_MASK      0x0000007F
+#define DDR0_21_DLL_DQS_BYPASS_4_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<0)
+#define DDR0_21_DLL_DQS_BYPASS_4_DECODE(n)   ((((unsigned long)(n))>>0)&0x7F)
+
+#define DDR0_22                         0x16
+/* ECC */
+#define DDR0_22_CTRL_RAW_MASK             0x03000000
+#define DDR0_22_CTRL_RAW_ECC_DISABLE      0x00000000 /* ECC not being used */
+#define DDR0_22_CTRL_RAW_ECC_CHECK_ONLY   0x01000000 /* ECC checking is on, but no attempts to correct*/
+#define DDR0_22_CTRL_RAW_NO_ECC_RAM       0x02000000 /* No ECC RAM storage available */
+#define DDR0_22_CTRL_RAW_ECC_ENABLE       0x03000000 /* ECC checking and correcting on */
+#define DDR0_22_CTRL_RAW_ENCODE(n)          ((((unsigned long)(n))&0x3)<<24)
+#define DDR0_22_CTRL_RAW_DECODE(n)          ((((unsigned long)(n))>>24)&0x3)
+
+#define DDR0_22_DQS_OUT_SHIFT_BYPASS_MASK 0x007F0000
+#define DDR0_22_DQS_OUT_SHIFT_BYPASS_ENCODE(n) ((((unsigned long)(n))&0x7F)<<16)
+#define DDR0_22_DQS_OUT_SHIFT_BYPASS_DECODE(n) ((((unsigned long)(n))>>16)&0x7F)
+#define DDR0_22_DQS_OUT_SHIFT_MASK        0x00007F00
+#define DDR0_22_DQS_OUT_SHIFT_ENCODE(n)     ((((unsigned long)(n))&0x7F)<<8)
+#define DDR0_22_DQS_OUT_SHIFT_DECODE(n)     ((((unsigned long)(n))>>8)&0x7F)
+#define DDR0_22_DLL_DQS_BYPASS_8_MASK     0x0000007F
+#define DDR0_22_DLL_DQS_BYPASS_8_ENCODE(n)  ((((unsigned long)(n))&0x7F)<<0)
+#define DDR0_22_DLL_DQS_BYPASS_8_DECODE(n)  ((((unsigned long)(n))>>0)&0x7F)
+
+
+#define DDR0_23                         0x17
+#define DDR0_23_ODT_RD_MAP_CS0_MASK       0x03000000
+#define DDR0_23_ODT_RD_MAP_CS0_ENCODE(n)   ((((unsigned long)(n))&0x3)<<24)
+#define DDR0_23_ODT_RD_MAP_CS0_DECODE(n)   ((((unsigned long)(n))>>24)&0x3)
+#define DDR0_23_ECC_C_SYND_MASK           0x00FF0000 /* Read only */
+#define DDR0_23_ECC_C_SYND_ENCODE(n)        ((((unsigned long)(n))&0xFF)<<16)
+#define DDR0_23_ECC_C_SYND_DECODE(n)        ((((unsigned long)(n))>>16)&0xFF)
+#define DDR0_23_ECC_U_SYND_MASK           0x0000FF00 /* Read only */
+#define DDR0_23_ECC_U_SYND_ENCODE(n)        ((((unsigned long)(n))&0xFF)<<8)
+#define DDR0_23_ECC_U_SYND_DECODE(n)        ((((unsigned long)(n))>>8)&0xFF)
+#define DDR0_23_FWC_MASK                  0x00000001 /* Write only */
+#define DDR0_23_FWC_ENCODE(n)               ((((unsigned long)(n))&0x1)<<0)
+#define DDR0_23_FWC_DECODE(n)               ((((unsigned long)(n))>>0)&0x1)
+
+#define DDR0_24                         0x18
+#define DDR0_24_RTT_PAD_TERMINATION_MASK  0x03000000
+#define DDR0_24_RTT_PAD_TERMINATION_ENCODE(n) ((((unsigned long)(n))&0x3)<<24)
+#define DDR0_24_RTT_PAD_TERMINATION_DECODE(n) ((((unsigned long)(n))>>24)&0x3)
+#define DDR0_24_ODT_WR_MAP_CS1_MASK       0x00030000
+#define DDR0_24_ODT_WR_MAP_CS1_ENCODE(n)    ((((unsigned long)(n))&0x3)<<16)
+#define DDR0_24_ODT_WR_MAP_CS1_DECODE(n)    ((((unsigned long)(n))>>16)&0x3)
+#define DDR0_24_ODT_RD_MAP_CS1_MASK       0x00000300
+#define DDR0_24_ODT_RD_MAP_CS1_ENCODE(n)    ((((unsigned long)(n))&0x3)<<8)
+#define DDR0_24_ODT_RD_MAP_CS1_DECODE(n)    ((((unsigned long)(n))>>8)&0x3)
+#define DDR0_24_ODT_WR_MAP_CS0_MASK       0x00000003
+#define DDR0_24_ODT_WR_MAP_CS0_ENCODE(n)    ((((unsigned long)(n))&0x3)<<0)
+#define DDR0_24_ODT_WR_MAP_CS0_DECODE(n)    ((((unsigned long)(n))>>0)&0x3)
+
+#define DDR0_25                         0x19
+#define DDR0_25_VERSION_MASK              0xFFFF0000 /* Read only */
+#define DDR0_25_VERSION_ENCODE(n)           ((((unsigned long)(n))&0xFFFF)<<16)
+#define DDR0_25_VERSION_DECODE(n)           ((((unsigned long)(n))>>16)&0xFFFF)
+#define DDR0_25_OUT_OF_RANGE_LENGTH_MASK  0x000003FF /* Read only */
+#define DDR0_25_OUT_OF_RANGE_LENGTH_ENCODE(n) ((((unsigned long)(n))&0x3FF)<<0)
+#define DDR0_25_OUT_OF_RANGE_LENGTH_DECODE(n) ((((unsigned long)(n))>>0)&0x3FF)
+
+#define DDR0_26                         0x1A
+#define DDR0_26_TRAS_MAX_MASK             0xFFFF0000
+#define DDR0_26_TRAS_MAX_ENCODE(n)          ((((unsigned long)(n))&0xFFFF)<<16)
+#define DDR0_26_TRAS_MAX_DECODE(n)          ((((unsigned long)(n))>>16)&0xFFFF)
+#define DDR0_26_TREF_MASK                 0x00003FFF
+#define DDR0_26_TREF_ENCODE(n)              ((((unsigned long)(n))&0x3FF)<<0)
+#define DDR0_26_TREF_DECODE(n)              ((((unsigned long)(n))>>0)&0x3FF)
+
+#define DDR0_27                         0x1B
+#define DDR0_27_EMRS_DATA_MASK            0x3FFF0000
+#define DDR0_27_EMRS_DATA_ENCODE(n)         ((((unsigned long)(n))&0x3FFF)<<16)
+#define DDR0_27_EMRS_DATA_DECODE(n)         ((((unsigned long)(n))>>16)&0x3FFF)
+#define DDR0_27_TINIT_MASK                0x0000FFFF
+#define DDR0_27_TINIT_ENCODE(n)             ((((unsigned long)(n))&0xFFFF)<<0)
+#define DDR0_27_TINIT_DECODE(n)             ((((unsigned long)(n))>>0)&0xFFFF)
+
+#define DDR0_28                         0x1C
+#define DDR0_28_EMRS3_DATA_MASK           0x3FFF0000
+#define DDR0_28_EMRS3_DATA_ENCODE(n)        ((((unsigned long)(n))&0x3FFF)<<16)
+#define DDR0_28_EMRS3_DATA_DECODE(n)        ((((unsigned long)(n))>>16)&0x3FFF)
+#define DDR0_28_EMRS2_DATA_MASK           0x00003FFF
+#define DDR0_28_EMRS2_DATA_ENCODE(n)        ((((unsigned long)(n))&0x3FFF)<<0)
+#define DDR0_28_EMRS2_DATA_DECODE(n)        ((((unsigned long)(n))>>0)&0x3FFF)
+
+#define DDR0_29                         0x1D
+
+#define DDR0_30                         0x1E
+
+#define DDR0_31                         0x1F
+#define DDR0_31_XOR_CHECK_BITS_MASK       0x0000FFFF
+#define DDR0_31_XOR_CHECK_BITS_ENCODE(n)    ((((unsigned long)(n))&0xFFFF)<<0)
+#define DDR0_31_XOR_CHECK_BITS_DECODE(n)    ((((unsigned long)(n))>>0)&0xFFFF)
+
+#define DDR0_32                         0x20
+#define DDR0_32_OUT_OF_RANGE_ADDR_MASK    0xFFFFFFFF /* Read only */
+#define DDR0_32_OUT_OF_RANGE_ADDR_ENCODE(n) ((((unsigned long)(n))&0xFFFFFFFF)<<0)
+#define DDR0_32_OUT_OF_RANGE_ADDR_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFFFFFF)
+
+#define DDR0_33                         0x21
+#define DDR0_33_OUT_OF_RANGE_ADDR_MASK    0x00000001 /* Read only */
+#define DDR0_33_OUT_OF_RANGE_ADDR_ENCODE(n) ((((unsigned long)(n))&0x1)<<0)
+#define DDR0_33_OUT_OF_RANGE_ADDR_DECODE(n)               ((((unsigned long)(n))>>0)&0x1)
+
+#define DDR0_34                         0x22
+#define DDR0_34_ECC_U_ADDR_MASK           0xFFFFFFFF /* Read only */
+#define DDR0_34_ECC_U_ADDR_ENCODE(n)        ((((unsigned long)(n))&0xFFFFFFFF)<<0)
+#define DDR0_34_ECC_U_ADDR_DECODE(n)        ((((unsigned long)(n))>>0)&0xFFFFFFFF)
+
+#define DDR0_35                         0x23
+#define DDR0_35_ECC_U_ADDR_MASK           0x00000001 /* Read only */
+#define DDR0_35_ECC_U_ADDR_ENCODE(n)        ((((unsigned long)(n))&0x1)<<0)
+#define DDR0_35_ECC_U_ADDR_DECODE(n)        ((((unsigned long)(n))>>0)&0x1)
+
+#define DDR0_36                         0x24
+#define DDR0_36_ECC_U_DATA_MASK           0xFFFFFFFF /* Read only */
+#define DDR0_36_ECC_U_DATA_ENCODE(n)        ((((unsigned long)(n))&0xFFFFFFFF)<<0)
+#define DDR0_36_ECC_U_DATA_DECODE(n)        ((((unsigned long)(n))>>0)&0xFFFFFFFF)
+
+#define DDR0_37                         0x25
+#define DDR0_37_ECC_U_DATA_MASK           0xFFFFFFFF /* Read only */
+#define DDR0_37_ECC_U_DATA_ENCODE(n)        ((((unsigned long)(n))&0xFFFFFFFF)<<0)
+#define DDR0_37_ECC_U_DATA_DECODE(n)        ((((unsigned long)(n))>>0)&0xFFFFFFFF)
+
+#define DDR0_38                         0x26
+#define DDR0_38_ECC_C_ADDR_MASK           0xFFFFFFFF /* Read only */
+#define DDR0_38_ECC_C_ADDR_ENCODE(n)        ((((unsigned long)(n))&0xFFFFFFFF)<<0)
+#define DDR0_38_ECC_C_ADDR_DECODE(n)        ((((unsigned long)(n))>>0)&0xFFFFFFFF)
+
+#define DDR0_39                         0x27
+#define DDR0_39_ECC_C_ADDR_MASK           0x00000001 /* Read only */
+#define DDR0_39_ECC_C_ADDR_ENCODE(n)        ((((unsigned long)(n))&0x1)<<0)
+#define DDR0_39_ECC_C_ADDR_DECODE(n)        ((((unsigned long)(n))>>0)&0x1)
+
+#define DDR0_40                         0x28
+#define DDR0_40_ECC_C_DATA_MASK           0xFFFFFFFF /* Read only */
+#define DDR0_40_ECC_C_DATA_ENCODE(n)        ((((unsigned long)(n))&0xFFFFFFFF)<<0)
+#define DDR0_40_ECC_C_DATA_DECODE(n)        ((((unsigned long)(n))>>0)&0xFFFFFFFF)
+
+#define DDR0_41                         0x29
+#define DDR0_41_ECC_C_DATA_MASK           0xFFFFFFFF /* Read only */
+#define DDR0_41_ECC_C_DATA_ENCODE(n)        ((((unsigned long)(n))&0xFFFFFFFF)<<0)
+#define DDR0_41_ECC_C_DATA_DECODE(n)        ((((unsigned long)(n))>>0)&0xFFFFFFFF)
+
+#define DDR0_42                         0x2A
+#define DDR0_42_ADDR_PINS_MASK            0x07000000
+#define DDR0_42_ADDR_PINS_ENCODE(n)         ((((unsigned long)(n))&0x7)<<24)
+#define DDR0_42_ADDR_PINS_DECODE(n)         ((((unsigned long)(n))>>24)&0x7)
+#define DDR0_42_CASLAT_LIN_GATE_MASK      0x0000000F
+#define DDR0_42_CASLAT_LIN_GATE_ENCODE(n)   ((((unsigned long)(n))&0xF)<<0)
+#define DDR0_42_CASLAT_LIN_GATE_DECODE(n)   ((((unsigned long)(n))>>0)&0xF)
+
+#define DDR0_43                         0x2B
+#define DDR0_43_TWR_MASK                  0x07000000
+#define DDR0_43_TWR_ENCODE(n)               ((((unsigned long)(n))&0x7)<<24)
+#define DDR0_43_TWR_DECODE(n)               ((((unsigned long)(n))>>24)&0x7)
+#define DDR0_43_APREBIT_MASK              0x000F0000
+#define DDR0_43_APREBIT_ENCODE(n)           ((((unsigned long)(n))&0xF)<<16)
+#define DDR0_43_APREBIT_DECODE(n)           ((((unsigned long)(n))>>16)&0xF)
+#define DDR0_43_COLUMN_SIZE_MASK          0x00000700
+#define DDR0_43_COLUMN_SIZE_ENCODE(n)       ((((unsigned long)(n))&0x7)<<8)
+#define DDR0_43_COLUMN_SIZE_DECODE(n)       ((((unsigned long)(n))>>8)&0x7)
+#define DDR0_43_EIGHT_BANK_MODE_MASK      0x00000001
+#define DDR0_43_EIGHT_BANK_MODE_8_BANKS     0x00000001
+#define DDR0_43_EIGHT_BANK_MODE_4_BANKS     0x00000000
+#define DDR0_43_EIGHT_BANK_MODE_ENCODE(n)   ((((unsigned long)(n))&0x1)<<0)
+#define DDR0_43_EIGHT_BANK_MODE_DECODE(n)   ((((unsigned long)(n))>>0)&0x1)
+
+#define DDR0_44                         0x2C
+#define DDR0_44_TRCD_MASK                 0x000000FF
+#define DDR0_44_TRCD_ENCODE(n)              ((((unsigned long)(n))&0xFF)<<0)
+#define DDR0_44_TRCD_DECODE(n)              ((((unsigned long)(n))>>0)&0xFF)
+
+#endif /* _SPD_SDRAM_DENALI_H_ */

board/lwmon5/u-boot.lds

@@ -0,0 +1,145 @@
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+SECTIONS
+{
+  .resetvec 0xFFFFFFFC :
+  {
+    *(.resetvec)
+  } = 0xffff
+
+  .bootpg 0xFFFFF000 :
+  {
+    cpu/ppc4xx/start.o	(.bootpg)
+  } = 0xffff
+
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)		}
+  .rela.text     : { *(.rela.text) 	}
+  .rel.data      : { *(.rel.data)		}
+  .rela.data     : { *(.rela.data) 	}
+  .rel.rodata    : { *(.rel.rodata) 	}
+  .rela.rodata   : { *(.rela.rodata) 	}
+  .rel.got       : { *(.rel.got)		}
+  .rela.got      : { *(.rela.got)		}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)		}
+  .rela.bss      : { *(.rela.bss)		}
+  .rel.plt       : { *(.rel.plt)		}
+  .rela.plt      : { *(.rela.plt)		}
+  .init          : { *(.init)	}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    /* WARNING - the following is hand-optimized to fit within	*/
+    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
+
+    cpu/ppc4xx/start.o	(.text)
+
+    *(.text)
+    *(.fixup)
+    *(.got1)
+  }
+  _etext = .;
+  PROVIDE (etext = .);
+  .rodata    :
+  {
+    *(.rodata)
+    *(.rodata1)
+    *(.rodata.str1.4)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x00FF) & 0xFFFFFF00;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  . = .;
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+
+  . = .;
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(256);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(256);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+
+  ppcenv_assert = ASSERT(. < 0xFFFF8000, ".bss section too big, overlaps .ppcenv section. Please update your confguration: CFG_MONITOR_BASE, CFG_MONITOR_LEN and TEXT_BASE may need to be modified.");
+
+  _end = . ;
+  PROVIDE (end = .);
+}

board/pcs440ep/config.mk

@@ -25,6 +25,9 @@
 # PCS440EP board
 #
 
+# Check the U-Boot Image with a SHA1 checksum
+ALL += $(obj)u-boot.sha1
+
 #TEXT_BASE = 0x00001000
 
 ifeq ($(ramsym),1)

board/pcs440ep/flash.c

@@ -83,6 +83,7 @@ void flash_print_info(flash_info_t *info)
 	case FLASH_MAN_FUJ:	printf ("FUJITSU ");		break;
 	case FLASH_MAN_SST:	printf ("SST ");		break;
 	case FLASH_MAN_EXCEL:	printf ("Excel Semiconductor "); break;
+	case FLASH_MAN_MX:	printf ("MXIC "); break;
 	default:		printf ("Unknown Vendor ");	break;
 	}
 
@@ -195,6 +196,9 @@ static ulong flash_get_size(vu_long *addr, flash_info_t *info)
 	case (CFG_FLASH_WORD_SIZE)EXCEL_MANUFACT:
 		info->flash_id = FLASH_MAN_EXCEL;
 		break;
+	case (CFG_FLASH_WORD_SIZE)MX_MANUFACT:
+		info->flash_id = FLASH_MAN_MX;
+		break;
 	default:
 		info->flash_id = FLASH_UNKNOWN;
 		info->sector_count = 0;

board/pcs440ep/init.S

@@ -87,27 +87,32 @@
     .globl tlbtab
 
 tlbtab:
-    tlbtab_start
+	tlbtab_start
 
-    /*
-     * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the
-     * speed up boot process. It is patched after relocation to enable SA_I
-     */
-    tlbentry( CFG_BOOT_BASE_ADDR, SZ_256M, CFG_BOOT_BASE_ADDR, 0, AC_R|AC_W|AC_X|SA_G/*|SA_I*/)
+	/*
+	 * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the
+	 * speed up boot process. It is patched after relocation to enable SA_I
+	 */
+	tlbentry( CFG_BOOT_BASE_ADDR, SZ_256M, CFG_BOOT_BASE_ADDR, 0, AC_R|AC_W|AC_X|SA_G/*|SA_I*/)
 
-    /* TLB-entry for init-ram in dcache (SA_I must be turned off!) */
-    tlbentry( CFG_INIT_RAM_ADDR, SZ_64K, CFG_INIT_RAM_ADDR, 0, AC_R|AC_W|AC_X|SA_G )
+	/* TLB-entry for init-ram in dcache (SA_I must be turned off!) */
+	tlbentry( CFG_INIT_RAM_ADDR, SZ_64K, CFG_INIT_RAM_ADDR, 0, AC_R|AC_W|AC_X|SA_G )
 
-    tlbentry( CFG_SDRAM_BASE, SZ_256M, CFG_SDRAM_BASE, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
-    tlbentry( CFG_PCI_BASE, SZ_256M, CFG_PCI_BASE, 0, AC_R|AC_W|SA_G|SA_I )
+	/*
+	 * TLB entries for SDRAM are not needed on this platform.
+	 * They are dynamically generated in the SPD DDR detection
+	 * routine.
+	 */
 
-    /* PCI */
-    tlbentry( CFG_PCI_MEMBASE, SZ_256M, CFG_PCI_MEMBASE, 0, AC_R|AC_W|SA_G|SA_I )
-    tlbentry( CFG_PCI_MEMBASE1, SZ_256M, CFG_PCI_MEMBASE1, 0, AC_R|AC_W|SA_G|SA_I )
-    tlbentry( CFG_PCI_MEMBASE2, SZ_256M, CFG_PCI_MEMBASE2, 0, AC_R|AC_W|SA_G|SA_I )
-    tlbentry( CFG_PCI_MEMBASE3, SZ_256M, CFG_PCI_MEMBASE3, 0, AC_R|AC_W|SA_G|SA_I )
+	tlbentry( CFG_PCI_BASE, SZ_256M, CFG_PCI_BASE, 0, AC_R|AC_W|SA_G|SA_I )
 
-    /* USB 2.0 Device */
-    tlbentry( CFG_USB_DEVICE, SZ_1K, 0x50000000, 0, AC_R|AC_W|SA_G|SA_I )
+	/* PCI */
+	tlbentry( CFG_PCI_MEMBASE, SZ_256M, CFG_PCI_MEMBASE, 0, AC_R|AC_W|SA_G|SA_I )
+	tlbentry( CFG_PCI_MEMBASE1, SZ_256M, CFG_PCI_MEMBASE1, 0, AC_R|AC_W|SA_G|SA_I )
+	tlbentry( CFG_PCI_MEMBASE2, SZ_256M, CFG_PCI_MEMBASE2, 0, AC_R|AC_W|SA_G|SA_I )
+	tlbentry( CFG_PCI_MEMBASE3, SZ_256M, CFG_PCI_MEMBASE3, 0, AC_R|AC_W|SA_G|SA_I )
 
-    tlbtab_end
+	/* USB 2.0 Device */
+	tlbentry( CFG_USB_DEVICE, SZ_1K, 0x50000000, 0, AC_R|AC_W|SA_G|SA_I )
+
+	tlbtab_end

board/pcs440ep/pcs440ep.c

@@ -23,20 +23,112 @@
 
 #include <common.h>
 #include <ppc4xx.h>
+#include <malloc.h>
+#include <command.h>
+#include <crc.h>
 #include <asm/processor.h>
 #include <spd_sdram.h>
+#include <status_led.h>
+#include <sha1.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
 extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
 
-static void set_leds(int val)
+unsigned char	sha1_checksum[SHA1_SUM_LEN];
+
+/* swap 4 Bits (Bit0 = Bit3, Bit1 = Bit2, Bit2 = Bit1 and Bit3 = Bit0) */
+unsigned char swapbits[16] = {0x0, 0x8, 0x4, 0xc, 0x2, 0xa, 0x6, 0xe,
+			      0x1, 0x9, 0x5, 0xd, 0x3, 0xb, 0x7, 0xf};
+
+static void set_leds (int val)
+{
+	out32(GPIO0_OR, (in32 (GPIO0_OR) & ~0x78000000) | (val << 27));
+}
+
+#define GET_LEDS ((in32 (GPIO0_OR) & 0x78000000) >> 27)
+
+void __led_init (led_id_t mask, int state)
+{
+	int	val = GET_LEDS;
+
+	if (state == STATUS_LED_ON)
+		val |= mask;
+	else
+		val &= ~mask;
+	set_leds (val);
+}
+
+void __led_set (led_id_t mask, int state)
+{
+	int	val = GET_LEDS;
+
+	if (state == STATUS_LED_ON)
+		val |= mask;
+	else if (state == STATUS_LED_OFF)
+		val &= ~mask;
+	set_leds (val);
+}
+
+void __led_toggle (led_id_t mask)
 {
-	unsigned char led[16] = {0x0, 0x8, 0x4, 0xc, 0x2, 0xa, 0x6, 0xe,
-				 0x1, 0x9, 0x5, 0xd, 0x3, 0xb, 0x7, 0xf};
-	out32(GPIO0_OR, (in32(GPIO0_OR) & ~0x78000000) | (led[val] << 27));
+	int	val = GET_LEDS;
+
+	val ^= mask;
+	set_leds (val);
 }
 
+static void status_led_blink (void)
+{
+	int	i;
+	int	val = GET_LEDS;
+
+	/* set all LED which are on, to state BLINKING */
+	for (i = 0; i < 4; i++) {
+		if (val & 0x08) status_led_set (i, STATUS_LED_BLINKING);
+		val = val << 1;
+	}
+}
+
+#if defined(CONFIG_SHOW_BOOT_PROGRESS)
+void show_boot_progress (int val)
+{
+	/* find all valid Codes for val in README */
+	if (val == -30) return;
+	if (val < 0) {
+		/* smthing goes wrong */
+		status_led_blink ();
+		return;
+	}
+	switch (val) {
+		case 1:
+			/* validating Image */
+			status_led_set (0, STATUS_LED_OFF);
+			status_led_set (1, STATUS_LED_ON);
+			status_led_set (2, STATUS_LED_ON);
+			break;
+		case 15:
+			/* booting */
+			status_led_set (0, STATUS_LED_ON);
+			status_led_set (1, STATUS_LED_ON);
+			status_led_set (2, STATUS_LED_ON);
+			break;
+		case 64:
+			/* starting Ethernet configuration */
+			status_led_set (0, STATUS_LED_OFF);
+			status_led_set (1, STATUS_LED_OFF);
+			status_led_set (2, STATUS_LED_ON);
+			break;
+		case 80:
+			/* loading Image */
+			status_led_set (0, STATUS_LED_ON);
+			status_led_set (1, STATUS_LED_OFF);
+			status_led_set (2, STATUS_LED_ON);
+			break;
+	}
+}
+#endif
+
 int board_early_init_f(void)
 {
 	register uint reg;
@@ -85,6 +177,251 @@ int board_early_init_f(void)
 	return 0;
 }
 
+#define EEPROM_LEN	256
+void load_sernum_ethaddr (void)
+{
+	int	ret;
+	char	buf[EEPROM_LEN];
+	char	mac[32];
+	char	*use_eeprom;
+	u16	checksumcrc16 = 0;
+
+	/* read the MACs from EEprom */
+	status_led_set (0, STATUS_LED_ON);
+	status_led_set (1, STATUS_LED_ON);
+	ret = eeprom_read (CFG_I2C_EEPROM_ADDR, 0, (uchar *)buf, EEPROM_LEN);
+	if (ret == 0) {
+		checksumcrc16 = cyg_crc16 ((uchar *)buf, EEPROM_LEN - 2);
+		/* check, if the EEprom is programmed:
+		 * - The Prefix(Byte 0,1,2) is equal to "ATR"
+		 * - The checksum, stored in the last 2 Bytes, is correct
+		 */
+		if ((strncmp (buf,"ATR",3) != 0) ||
+		    ((checksumcrc16 >> 8) != buf[EEPROM_LEN - 2]) ||
+		    ((checksumcrc16 & 0xff) != buf[EEPROM_LEN - 1])) {
+			/* EEprom is not programmed */
+			printf("%s: EEPROM Checksum not OK\n", __FUNCTION__);
+		} else {
+			/* get the MACs */
+			sprintf (mac, "%02x:%02x:%02x:%02x:%02x:%02x",
+				buf[3],
+				buf[4],
+				buf[5],
+				buf[6],
+				buf[7],
+				buf[8]);
+			setenv ("ethaddr", (char *) mac);
+			sprintf (mac, "%02x:%02x:%02x:%02x:%02x:%02x",
+				buf[9],
+				buf[10],
+				buf[11],
+				buf[12],
+				buf[13],
+				buf[14]);
+			setenv ("eth1addr", (char *) mac);
+			return;
+		}
+	}
+
+	/* some error reading the EEprom */
+	if ((use_eeprom = getenv ("use_eeprom_ethaddr")) == NULL) {
+		/* dont use bootcmd */
+		setenv("bootdelay", "-1");
+		return;
+	}
+	/* == default ? use standard */
+	if (strncmp (use_eeprom, "default", 7) == 0) {
+		return;
+	}
+	/* Env doesnt exist -> hang */
+	status_led_blink ();
+	hang ();
+	return;
+}
+
+#ifdef CONFIG_PREBOOT
+
+static uchar kbd_magic_prefix[]		= "key_magic";
+static uchar kbd_command_prefix[]	= "key_cmd";
+
+struct kbd_data_t {
+	char s1;
+	char s2;
+};
+
+struct kbd_data_t* get_keys (struct kbd_data_t *kbd_data)
+{
+	char *val;
+	unsigned long tmp;
+
+	/* use the DIPs for some bootoptions */
+	val = getenv (ENV_NAME_DIP);
+	tmp = simple_strtoul (val, NULL, 16);
+
+	kbd_data->s2 = (tmp & 0x0f);
+	kbd_data->s1 = (tmp & 0xf0) >> 4;
+	return kbd_data;
+}
+
+static int compare_magic (const struct kbd_data_t *kbd_data, char *str)
+{
+	char s1 = str[0];
+
+	if (s1 >= '0' && s1 <= '9')
+		s1 -= '0';
+	else if (s1 >= 'a' && s1 <= 'f')
+		s1 = s1 - 'a' + 10;
+	else if (s1 >= 'A' && s1 <= 'F')
+		s1 = s1 - 'A' + 10;
+	else
+		return -1;
+
+	if (s1 != kbd_data->s1) return -1;
+
+	s1 = str[1];
+	if (s1 >= '0' && s1 <= '9')
+		s1 -= '0';
+	else if (s1 >= 'a' && s1 <= 'f')
+		s1 = s1 - 'a' + 10;
+	else if (s1 >= 'A' && s1 <= 'F')
+		s1 = s1 - 'A' + 10;
+	else
+		return -1;
+
+	if (s1 != kbd_data->s2) return -1;
+	return 0;
+}
+
+static char *key_match (const struct kbd_data_t *kbd_data)
+{
+	char magic[sizeof (kbd_magic_prefix) + 1];
+	char *suffix;
+	char *kbd_magic_keys;
+
+	/*
+	 * The following string defines the characters that can be appended
+	 * to "key_magic" to form the names of environment variables that
+	 * hold "magic" key codes, i. e. such key codes that can cause
+	 * pre-boot actions. If the string is empty (""), then only
+	 * "key_magic" is checked (old behaviour); the string "125" causes
+	 * checks for "key_magic1", "key_magic2" and "key_magic5", etc.
+	 */
+	if ((kbd_magic_keys = getenv ("magic_keys")) == NULL)
+		kbd_magic_keys = "";
+
+	/* loop over all magic keys;
+	 * use '\0' suffix in case of empty string
+	 */
+	for (suffix = kbd_magic_keys; *suffix ||
+		     suffix == kbd_magic_keys; ++suffix) {
+		sprintf (magic, "%s%c", kbd_magic_prefix, *suffix);
+		if (compare_magic (kbd_data, getenv (magic)) == 0) {
+			char cmd_name[sizeof (kbd_command_prefix) + 1];
+			char *cmd;
+
+			sprintf (cmd_name, "%s%c", kbd_command_prefix, *suffix);
+			cmd = getenv (cmd_name);
+
+			return (cmd);
+		}
+	}
+	return (NULL);
+}
+
+#endif /* CONFIG_PREBOOT */
+
+static int pcs440ep_readinputs (void)
+{
+	int	i;
+	char	value[20];
+
+	/* read the inputs and set the Envvars */
+	/* Revision Level Bit 26 - 29 */
+	i = ((in32 (GPIO0_IR) & 0x0000003c) >> 2);
+	i = swapbits[i];
+	sprintf (value, "%02x", i);
+	setenv (ENV_NAME_REVLEV, value);
+	/* Solder Switch Bit 30 - 33 */
+	i = (in32 (GPIO0_IR) & 0x00000003) << 2;
+	i += (in32 (GPIO1_IR) & 0xc0000000) >> 30;
+	i = swapbits[i];
+	sprintf (value, "%02x", i);
+	setenv (ENV_NAME_SOLDER, value);
+	/* DIP Switch Bit 49 - 56 */
+	i = ((in32 (GPIO1_IR) & 0x00007f80) >> 7);
+	i = (swapbits[i & 0x0f] << 4) + swapbits[(i & 0xf0) >> 4];
+	sprintf (value, "%02x", i);
+	setenv (ENV_NAME_DIP, value);
+	return 0;
+}
+
+
+#if defined(CONFIG_SHA1_CHECK_UB_IMG)
+/*************************************************************************
+ * calculate a SHA1 sum for the U-Boot image in Flash.
+ *
+ ************************************************************************/
+static int pcs440ep_sha1 (int docheck)
+{
+	unsigned char *data;
+	unsigned char *ptroff;
+	unsigned char output[20];
+	unsigned char org[20];
+	int	i, len = CONFIG_SHA1_LEN;
+
+	memcpy ((char *)CFG_LOAD_ADDR, (char *)CONFIG_SHA1_START, len);
+	data = (unsigned char *)CFG_LOAD_ADDR;
+	ptroff = &data[len + SHA1_SUM_POS];
+
+	for (i = 0; i < SHA1_SUM_LEN; i++) {
+		org[i] = ptroff[i];
+		ptroff[i] = 0;
+	}
+
+	sha1_csum ((unsigned char *) data, len, (unsigned char *)output);
+
+	if (docheck == 2) {
+		for (i = 0; i < 20 ; i++) {
+			printf("%02X ", output[i]);
+		}
+		printf("\n");
+	}
+	if (docheck == 1) {
+		for (i = 0; i < 20 ; i++) {
+			if (org[i] != output[i]) return 1;
+		}
+	}
+	return 0;
+}
+
+/*************************************************************************
+ * do some checks after the SHA1 checksum from the U-Boot Image was
+ * calculated.
+ *
+ ************************************************************************/
+static void pcs440ep_checksha1 (void)
+{
+	int	ret;
+	char	*cs_test;
+
+	ret = pcs440ep_sha1 (1);
+	if (ret == 0) return;
+
+	if ((cs_test = getenv ("cs_test")) == NULL) {
+		/* Env doesnt exist -> hang */
+		status_led_blink ();
+		hang ();
+	}
+
+	if (strncmp (cs_test, "off", 3) == 0) {
+		printf ("SHA1 U-Boot sum NOT ok!\n");
+		setenv ("bootdelay", "-1");
+	}
+}
+#else
+static __inline__ void pcs440ep_checksha1 (void) { do {} while (0);}
+#endif
+
 int misc_init_r (void)
 {
 	uint pbcr;
@@ -139,6 +476,18 @@ int misc_init_r (void)
 			    CFG_ENV_ADDR_REDUND + 2*CFG_ENV_SECT_SIZE - 1,
 			    &flash_info[1]);
 
+	pcs440ep_readinputs ();
+	pcs440ep_checksha1 ();
+#ifdef CONFIG_PREBOOT
+	{
+		struct kbd_data_t kbd_data;
+		/* Decode keys */
+		char *str = strdup (key_match (get_keys (&kbd_data)));
+		/* Set or delete definition */
+		setenv ("preboot", str);
+		free (str);
+	}
+#endif /* CONFIG_PREBOOT */
 	return 0;
 }
 
@@ -156,13 +505,31 @@ int checkboard(void)
 	return (0);
 }
 
+void spd_ddr_init_hang (void)
+{
+	status_led_set (0, STATUS_LED_OFF);
+	status_led_set (1, STATUS_LED_ON);
+	/* we cannot use hang() because we are still running from
+	   Flash, and so the status_led driver is not initialized */
+	puts ("### ERROR ### Please RESET the board ###\n");
+	for (;;) {
+		__led_toggle (4);
+		udelay (100000);
+	}
+}
+
 long int initdram (int board_type)
 {
 	long dram_size = 0;
 
-	set_leds(1);			/* display boot info counter */
+	status_led_set (0, STATUS_LED_ON);
+	status_led_set (1, STATUS_LED_OFF);
 	dram_size = spd_sdram();
-	set_leds(2);			/* display boot info counter */
+	status_led_set (0, STATUS_LED_OFF);
+	status_led_set (1, STATUS_LED_ON);
+	if (dram_size == 0) {
+		hang();
+	}
 
 	return dram_size;
 }
@@ -217,7 +584,7 @@ int testdram(void)
  *	certain pre-initialization actions.
  *
  ************************************************************************/
-#if defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT)
+#if defined(CONFIG_PCI)
 int pci_pre_init(struct pci_controller *hose)
 {
 	unsigned long addr;
@@ -258,7 +625,7 @@ int pci_pre_init(struct pci_controller *hose)
 
 	return 1;
 }
-#endif				/* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */
+#endif	/* defined(CONFIG_PCI) */
 
 /*************************************************************************
  *  pci_target_init
@@ -377,3 +744,119 @@ void hw_watchdog_reset(void)
 
 }
 #endif
+
+/*************************************************************************
+ * "led" Commando for the U-Boot shell
+ *
+ ************************************************************************/
+int do_led (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	int	rcode = 0;
+	ulong	pattern = 0;
+
+	pattern = simple_strtoul (argv[1], NULL, 10);
+	if (pattern > 200) {
+		status_led_blink ();
+		hang ();
+		return rcode;
+	}
+	if (pattern > 100) {
+		status_led_blink ();
+		return rcode;
+	}
+	pattern &= 0x0f;
+	set_leds (pattern);
+	return rcode;
+}
+
+U_BOOT_CMD(
+ 	led,	2,	1,	do_led,
+ 	"led    - set the led\n",
+	NULL
+);
+
+#if defined(CONFIG_SHA1_CHECK_UB_IMG)
+/*************************************************************************
+ * "sha1" Commando for the U-Boot shell
+ *
+ ************************************************************************/
+int do_sha1 (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	int	rcode = -1;
+
+	if (argc < 2) {
+  usage:
+		printf ("Usage:\n%s\n", cmdtp->usage);
+		return 1;
+	}
+
+	if (argc >= 3) {
+		unsigned char *data;
+		unsigned char output[20];
+		int	len;
+		int	i;
+
+		data = (unsigned char *)simple_strtoul (argv[1], NULL, 16);
+		len = simple_strtoul (argv[2], NULL, 16);
+		sha1_csum (data, len, (unsigned char *)output);
+		printf ("U-Boot sum:\n");
+		for (i = 0; i < 20 ; i++) {
+			printf ("%02X ", output[i]);
+		}
+		printf ("\n");
+		if (argc == 4) {
+			data = (unsigned char *)simple_strtoul (argv[3], NULL, 16);
+			memcpy (data, output, 20);
+		}
+		return 0;
+	}
+	if (argc == 2) {
+		char *ptr = argv[1];
+		if (*ptr != '-') goto usage;
+		ptr++;
+		if ((*ptr == 'c') || (*ptr == 'C')) {
+			rcode = pcs440ep_sha1 (1);
+			printf ("SHA1 U-Boot sum %sok!\n", (rcode != 0) ? "not " : "");
+		} else if ((*ptr == 'p') || (*ptr == 'P')) {
+			rcode = pcs440ep_sha1 (2);
+		} else {
+			rcode = pcs440ep_sha1 (0);
+		}
+		return rcode;
+	}
+	return rcode;
+}
+
+U_BOOT_CMD(
+ 	sha1,	4,	1,	do_sha1,
+ 	"sha1    - calculate the SHA1 Sum\n",
+	"address len [addr]  calculate the SHA1 sum [save at addr]\n"
+	"     -p calculate the SHA1 sum from the U-Boot image in flash and print\n"
+	"     -c check the U-Boot image in flash\n"
+);
+#endif
+
+#ifdef CONFIG_IDE_PREINIT
+int ide_preinit (void)
+{
+	/* Set True IDE Mode */
+	out32 (GPIO0_OR, (in32 (GPIO0_OR) | 0x00100000));
+	out32 (GPIO0_OR, (in32 (GPIO0_OR) | 0x00200000));
+	out32 (GPIO1_OR, (in32 (GPIO1_OR) & ~0x00008040));
+	udelay (100000);
+	return 0;
+}
+#endif
+
+#if defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET)
+void ide_set_reset (int idereset)
+{
+	debug ("ide_reset(%d)\n", idereset);
+	if (idereset == 0) {
+		out32 (GPIO0_OR, (in32 (GPIO0_OR) | 0x00200000));
+	} else {
+		out32 (GPIO0_OR, (in32 (GPIO0_OR) & ~0x00200000));
+	}
+	udelay (10000);
+}
+#endif /* defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) */

board/pcs440ep/u-boot.lds

@@ -65,6 +65,7 @@ SECTIONS
   {
     cpu/ppc4xx/start.o	(.text)
     board/pcs440ep/init.o	(.text)
+    lib_generic/sha1.o		(.text)
 
     *(.text)
     *(.fixup)

board/prodrive/alpr/alpr.c

@@ -172,7 +172,7 @@ int testdram (void)
  *	certain pre-initialization actions.
  *
  ************************************************************************/
-#if defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT)
+#if defined(CONFIG_PCI)
 int pci_pre_init(struct pci_controller * hose )
 {
 	unsigned long strap;
@@ -192,7 +192,7 @@ int pci_pre_init(struct pci_controller * hose )
 
 	return 1;
 }
-#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */
+#endif /* defined(CONFIG_PCI) */
 
 /*************************************************************************
  *  pci_target_init

board/prodrive/p3p440/p3p440.c

@@ -176,7 +176,7 @@ int misc_init_r (void)
  *	certain pre-initialization actions.
  *
  ************************************************************************/
-#if defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT)
+#if defined(CONFIG_PCI)
 int pci_pre_init(struct pci_controller *hose)
 {
 	unsigned long strap;
@@ -193,7 +193,7 @@ int pci_pre_init(struct pci_controller *hose)
 
 	return 1;
 }
-#endif				/* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */
+#endif	/* defined(CONFIG_PCI) */
 
 /*************************************************************************
  *  pci_target_init

board/sandburst/common/sb_common.c

@@ -313,7 +313,7 @@ long int fixed_sdram (void)
  *	certain pre-initialization actions.
  *
  ************************************************************************/
-#if defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT)
+#if defined(CONFIG_PCI)
 int pci_pre_init(struct pci_controller * hose )
 {
 	unsigned long strap;
@@ -330,7 +330,7 @@ int pci_pre_init(struct pci_controller * hose )
 
 	return 1;
 }
-#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */
+#endif /* defined(CONFIG_PCI) */
 
 /*************************************************************************
  *  pci_target_init

board/sc520_cdp/sc520_cdp.c

@@ -507,6 +507,7 @@ int dram_init(void)
 
 void show_boot_progress(int val)
 {
+	if (val < -32) val = -1;  /* let things compatible */
 	outb(val&0xff, 0x80);
 	outb((val&0xff00)>>8, 0x680);
 }

board/sc520_spunk/sc520_spunk.c

@@ -507,6 +507,7 @@ void show_boot_progress(int val)
 {
 	int version = read_mmcr_byte(SC520_SYSINFO);
 
+	if (val < -32) val = -1;  /* let things compatible */
 	if (version == 0) {
 		/* PIO31-PIO16 Data */
 		write_mmcr_word(SC520_PIODATA31_16,

board/smdk2400/lowlevel_init.S

@@ -117,7 +117,7 @@
 #define TREFMD	0x0	/* CBR(CAS before RAS)/auto refresh */
 #define Trp	0x0	/* 2 clk */
 #define Trc	0x3	/* 7 clk */
-#define Tchr	0x2 	/* 3 clk */
+#define Tchr	0x2	/* 3 clk */
 
 #define REFCNT	1113	/* period=15.6 us, HCLK=60Mhz, (2048+1-15.6*66) */
 

board/stxssa/stxssa.c

@@ -52,147 +52,147 @@ long int fixed_sdram (void);
 const iop_conf_t iop_conf_tab[4][32] = {
 
     /* Port A configuration */
-    {   /*            conf ppar psor pdir podr pdat */
-	/* PA31 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 TxENB */
-	/* PA30 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 TxClav   */
-	/* PA29 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 TxSOC  */
-	/* PA28 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 RxENB */
-	/* PA27 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 RxSOC */
-	/* PA26 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 RxClav */
-	/* PA25 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[0] */
-	/* PA24 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[1] */
-	/* PA23 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[2] */
-	/* PA22 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[3] */
-	/* PA21 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[4] */
-	/* PA20 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[5] */
-	/* PA19 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[6] */
-	/* PA18 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[7] */
-	/* PA17 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[7] */
-	/* PA16 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[6] */
-	/* PA15 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[5] */
-	/* PA14 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[4] */
-	/* PA13 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[3] */
-	/* PA12 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[2] */
-	/* PA11 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[1] */
-	/* PA10 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[0] */
-	/* PA9  */ {   0,   1,   1,   1,   0,   0   }, /* FCC1 L1TXD */
-	/* PA8  */ {   0,   1,   1,   0,   0,   0   }, /* FCC1 L1RXD */
-	/* PA7  */ {   0,   0,   0,   1,   0,   0   }, /* PA7 */
-	/* PA6  */ {   0,   1,   1,   1,   0,   0   }, /* TDM A1 L1RSYNC */
-	/* PA5  */ {   0,   0,   0,   1,   0,   0   }, /* PA5 */
-	/* PA4  */ {   0,   0,   0,   1,   0,   0   }, /* PA4 */
-	/* PA3  */ {   0,   0,   0,   1,   0,   0   }, /* PA3 */
-	/* PA2  */ {   0,   0,   0,   1,   0,   0   }, /* PA2 */
-	/* PA1  */ {   1,   0,   0,   0,   0,   0   }, /* FREERUN */
-	/* PA0  */ {   0,   0,   0,   1,   0,   0   }  /* PA0 */
+    {	/*	      conf ppar psor pdir podr pdat */
+	/* PA31 */ {   0,   1,	 0,   1,   0,	0   }, /* FCC1 TxENB */
+	/* PA30 */ {   0,   1,	 0,   0,   0,	0   }, /* FCC1 TxClav	*/
+	/* PA29 */ {   0,   1,	 0,   1,   0,	0   }, /* FCC1 TxSOC  */
+	/* PA28 */ {   0,   1,	 0,   1,   0,	0   }, /* FCC1 RxENB */
+	/* PA27 */ {   0,   1,	 0,   0,   0,	0   }, /* FCC1 RxSOC */
+	/* PA26 */ {   0,   1,	 0,   0,   0,	0   }, /* FCC1 RxClav */
+	/* PA25 */ {   0,   1,	 0,   1,   0,	0   }, /* FCC1 ATMTXD[0] */
+	/* PA24 */ {   0,   1,	 0,   1,   0,	0   }, /* FCC1 ATMTXD[1] */
+	/* PA23 */ {   0,   1,	 0,   1,   0,	0   }, /* FCC1 ATMTXD[2] */
+	/* PA22 */ {   0,   1,	 0,   1,   0,	0   }, /* FCC1 ATMTXD[3] */
+	/* PA21 */ {   0,   1,	 0,   1,   0,	0   }, /* FCC1 ATMTXD[4] */
+	/* PA20 */ {   0,   1,	 0,   1,   0,	0   }, /* FCC1 ATMTXD[5] */
+	/* PA19 */ {   0,   1,	 0,   1,   0,	0   }, /* FCC1 ATMTXD[6] */
+	/* PA18 */ {   0,   1,	 0,   1,   0,	0   }, /* FCC1 ATMTXD[7] */
+	/* PA17 */ {   0,   1,	 0,   0,   0,	0   }, /* FCC1 ATMRXD[7] */
+	/* PA16 */ {   0,   1,	 0,   0,   0,	0   }, /* FCC1 ATMRXD[6] */
+	/* PA15 */ {   0,   1,	 0,   0,   0,	0   }, /* FCC1 ATMRXD[5] */
+	/* PA14 */ {   0,   1,	 0,   0,   0,	0   }, /* FCC1 ATMRXD[4] */
+	/* PA13 */ {   0,   1,	 0,   0,   0,	0   }, /* FCC1 ATMRXD[3] */
+	/* PA12 */ {   0,   1,	 0,   0,   0,	0   }, /* FCC1 ATMRXD[2] */
+	/* PA11 */ {   0,   1,	 0,   0,   0,	0   }, /* FCC1 ATMRXD[1] */
+	/* PA10 */ {   0,   1,	 0,   0,   0,	0   }, /* FCC1 ATMRXD[0] */
+	/* PA9	*/ {   0,   1,	 1,   1,   0,	0   }, /* FCC1 L1TXD */
+	/* PA8	*/ {   0,   1,	 1,   0,   0,	0   }, /* FCC1 L1RXD */
+	/* PA7	*/ {   0,   0,	 0,   1,   0,	0   }, /* PA7 */
+	/* PA6	*/ {   0,   1,	 1,   1,   0,	0   }, /* TDM A1 L1RSYNC */
+	/* PA5	*/ {   0,   0,	 0,   1,   0,	0   }, /* PA5 */
+	/* PA4	*/ {   0,   0,	 0,   1,   0,	0   }, /* PA4 */
+	/* PA3	*/ {   0,   0,	 0,   1,   0,	0   }, /* PA3 */
+	/* PA2	*/ {   0,   0,	 0,   1,   0,	0   }, /* PA2 */
+	/* PA1	*/ {   1,   0,	 0,   0,   0,	0   }, /* FREERUN */
+	/* PA0	*/ {   0,   0,	 0,   1,   0,	0   }  /* PA0 */
     },
 
     /* Port B configuration */
-    {   /*            conf ppar psor pdir podr pdat */
-	/* PB31 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TX_ER */
-	/* PB30 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RX_DV */
-	/* PB29 */ {   1,   1,   1,   1,   0,   0   }, /* FCC2 MII TX_EN */
-	/* PB28 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RX_ER */
-	/* PB27 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII COL */
-	/* PB26 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII CRS */
-	/* PB25 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TxD[3] */
-	/* PB24 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TxD[2] */
-	/* PB23 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TxD[1] */
-	/* PB22 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TxD[0] */
-	/* PB21 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RxD[0] */
-	/* PB20 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RxD[1] */
-	/* PB19 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RxD[2] */
-	/* PB18 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RxD[3] */
-	/* PB17 */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:RX_DIV */
-	/* PB16 */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:RX_ERR */
-	/* PB15 */ {   0,   1,   0,   1,   0,   0   }, /* FCC3:TX_ERR */
-	/* PB14 */ {   0,   1,   0,   1,   0,   0   }, /* FCC3:TX_EN */
-	/* PB13 */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:COL */
-	/* PB12 */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:CRS */
-	/* PB11 */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:RXD */
-	/* PB10 */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:RXD */
-	/* PB9  */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:RXD */
-	/* PB8  */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:RXD */
-	/* PB7  */ {   0,   1,   0,   1,   0,   0   }, /* FCC3:TXD */
-	/* PB6  */ {   0,   1,   0,   1,   0,   0   }, /* FCC3:TXD */
-	/* PB5  */ {   0,   1,   0,   1,   0,   0   }, /* FCC3:TXD */
-	/* PB4  */ {   0,   1,   0,   1,   0,   0   }, /* FCC3:TXD */
-	/* PB3  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
-	/* PB2  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
-	/* PB1  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
-	/* PB0  */ {   0,   0,   0,   0,   0,   0   }  /* pin doesn't exist */
+    {	/*	      conf ppar psor pdir podr pdat */
+	/* PB31 */ {   1,   1,	 0,   1,   0,	0   }, /* FCC2 MII TX_ER */
+	/* PB30 */ {   1,   1,	 0,   0,   0,	0   }, /* FCC2 MII RX_DV */
+	/* PB29 */ {   1,   1,	 1,   1,   0,	0   }, /* FCC2 MII TX_EN */
+	/* PB28 */ {   1,   1,	 0,   0,   0,	0   }, /* FCC2 MII RX_ER */
+	/* PB27 */ {   1,   1,	 0,   0,   0,	0   }, /* FCC2 MII COL */
+	/* PB26 */ {   1,   1,	 0,   0,   0,	0   }, /* FCC2 MII CRS */
+	/* PB25 */ {   1,   1,	 0,   1,   0,	0   }, /* FCC2 MII TxD[3] */
+	/* PB24 */ {   1,   1,	 0,   1,   0,	0   }, /* FCC2 MII TxD[2] */
+	/* PB23 */ {   1,   1,	 0,   1,   0,	0   }, /* FCC2 MII TxD[1] */
+	/* PB22 */ {   1,   1,	 0,   1,   0,	0   }, /* FCC2 MII TxD[0] */
+	/* PB21 */ {   1,   1,	 0,   0,   0,	0   }, /* FCC2 MII RxD[0] */
+	/* PB20 */ {   1,   1,	 0,   0,   0,	0   }, /* FCC2 MII RxD[1] */
+	/* PB19 */ {   1,   1,	 0,   0,   0,	0   }, /* FCC2 MII RxD[2] */
+	/* PB18 */ {   1,   1,	 0,   0,   0,	0   }, /* FCC2 MII RxD[3] */
+	/* PB17 */ {   0,   1,	 0,   0,   0,	0   }, /* FCC3:RX_DIV */
+	/* PB16 */ {   0,   1,	 0,   0,   0,	0   }, /* FCC3:RX_ERR */
+	/* PB15 */ {   0,   1,	 0,   1,   0,	0   }, /* FCC3:TX_ERR */
+	/* PB14 */ {   0,   1,	 0,   1,   0,	0   }, /* FCC3:TX_EN */
+	/* PB13 */ {   0,   1,	 0,   0,   0,	0   }, /* FCC3:COL */
+	/* PB12 */ {   0,   1,	 0,   0,   0,	0   }, /* FCC3:CRS */
+	/* PB11 */ {   0,   1,	 0,   0,   0,	0   }, /* FCC3:RXD */
+	/* PB10 */ {   0,   1,	 0,   0,   0,	0   }, /* FCC3:RXD */
+	/* PB9	*/ {   0,   1,	 0,   0,   0,	0   }, /* FCC3:RXD */
+	/* PB8	*/ {   0,   1,	 0,   0,   0,	0   }, /* FCC3:RXD */
+	/* PB7	*/ {   0,   1,	 0,   1,   0,	0   }, /* FCC3:TXD */
+	/* PB6	*/ {   0,   1,	 0,   1,   0,	0   }, /* FCC3:TXD */
+	/* PB5	*/ {   0,   1,	 0,   1,   0,	0   }, /* FCC3:TXD */
+	/* PB4	*/ {   0,   1,	 0,   1,   0,	0   }, /* FCC3:TXD */
+	/* PB3	*/ {   0,   0,	 0,   0,   0,	0   }, /* pin doesn't exist */
+	/* PB2	*/ {   0,   0,	 0,   0,   0,	0   }, /* pin doesn't exist */
+	/* PB1	*/ {   0,   0,	 0,   0,   0,	0   }, /* pin doesn't exist */
+	/* PB0	*/ {   0,   0,	 0,   0,   0,	0   }  /* pin doesn't exist */
     },
 
     /* Port C */
-    {   /*            conf ppar psor pdir podr pdat */
-	/* PC31 */ {   0,   0,   0,   1,   0,   0   }, /* PC31 */
-	/* PC30 */ {   0,   0,   0,   1,   0,   0   }, /* PC30 */
-	/* PC29 */ {   0,   1,   1,   0,   0,   0   }, /* SCC1 EN *CLSN */
-	/* PC28 */ {   0,   0,   0,   1,   0,   0   }, /* PC28 */
-	/* PC27 */ {   0,   0,   0,   1,   0,   0   }, /* UART Clock in */
-	/* PC26 */ {   0,   0,   0,   1,   0,   0   }, /* PC26 */
-	/* PC25 */ {   0,   0,   0,   1,   0,   0   }, /* PC25 */
-	/* PC24 */ {   0,   0,   0,   1,   0,   0   }, /* PC24 */
-	/* PC23 */ {   0,   1,   0,   1,   0,   0   }, /* ATMTFCLK */
-	/* PC22 */ {   0,   1,   0,   0,   0,   0   }, /* ATMRFCLK */
-	/* PC21 */ {   0,   1,   0,   0,   0,   0   }, /* SCC1 EN RXCLK */
-	/* PC20 */ {   0,   1,   0,   0,   0,   0   }, /* SCC1 EN TXCLK */
-	/* PC19 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RX_CLK CLK13 */
-	/* PC18 */ {   1,   1,   0,   0,   0,   0   }, /* FCC Tx Clock (CLK14) */
-	/* PC17 */ {   0,   0,   0,   1,   0,   0   }, /* PC17 */
-	/* PC16 */ {   0,   1,   0,   0,   0,   0   }, /* FCC Tx Clock (CLK16) */
-	/* PC15 */ {   0,   1,   0,   0,   0,   0   }, /* PC15 */
-	/* PC14 */ {   0,   1,   0,   0,   0,   0   }, /* SCC1 EN *CD */
-	/* PC13 */ {   0,   0,   0,   1,   0,   0   }, /* PC13 */
-	/* PC12 */ {   0,   1,   0,   1,   0,   0   }, /* PC12 */
-	/* PC11 */ {   0,   0,   0,   1,   0,   0   }, /* LXT971 transmit control */
-	/* PC10 */ {   0,   0,   0,   1,   0,   0   }, /* FETHMDC */
-	/* PC9  */ {   0,   0,   0,   0,   0,   0   }, /* FETHMDIO */
-	/* PC8  */ {   0,   0,   0,   1,   0,   0   }, /* PC8 */
-	/* PC7  */ {   0,   0,   0,   1,   0,   0   }, /* PC7 */
-	/* PC6  */ {   0,   0,   0,   1,   0,   0   }, /* PC6 */
-	/* PC5  */ {   0,   0,   0,   1,   0,   0   }, /* PC5 */
-	/* PC4  */ {   0,   0,   0,   1,   0,   0   }, /* PC4 */
-	/* PC3  */ {   0,   0,   0,   1,   0,   0   }, /* PC3 */
-	/* PC2  */ {   0,   0,   0,   1,   0,   1   }, /* ENET FDE */
-	/* PC1  */ {   0,   0,   0,   1,   0,   0   }, /* ENET DSQE */
-	/* PC0  */ {   0,   0,   0,   1,   0,   0   }, /* ENET LBK */
+    {	/*	      conf ppar psor pdir podr pdat */
+	/* PC31 */ {   0,   0,	 0,   1,   0,	0   }, /* PC31 */
+	/* PC30 */ {   0,   0,	 0,   1,   0,	0   }, /* PC30 */
+	/* PC29 */ {   0,   1,	 1,   0,   0,	0   }, /* SCC1 EN *CLSN */
+	/* PC28 */ {   0,   0,	 0,   1,   0,	0   }, /* PC28 */
+	/* PC27 */ {   0,   0,	 0,   1,   0,	0   }, /* UART Clock in */
+	/* PC26 */ {   0,   0,	 0,   1,   0,	0   }, /* PC26 */
+	/* PC25 */ {   0,   0,	 0,   1,   0,	0   }, /* PC25 */
+	/* PC24 */ {   0,   0,	 0,   1,   0,	0   }, /* PC24 */
+	/* PC23 */ {   0,   1,	 0,   1,   0,	0   }, /* ATMTFCLK */
+	/* PC22 */ {   0,   1,	 0,   0,   0,	0   }, /* ATMRFCLK */
+	/* PC21 */ {   0,   1,	 0,   0,   0,	0   }, /* SCC1 EN RXCLK */
+	/* PC20 */ {   0,   1,	 0,   0,   0,	0   }, /* SCC1 EN TXCLK */
+	/* PC19 */ {   1,   1,	 0,   0,   0,	0   }, /* FCC2 MII RX_CLK CLK13 */
+	/* PC18 */ {   1,   1,	 0,   0,   0,	0   }, /* FCC Tx Clock (CLK14) */
+	/* PC17 */ {   0,   0,	 0,   1,   0,	0   }, /* PC17 */
+	/* PC16 */ {   0,   1,	 0,   0,   0,	0   }, /* FCC Tx Clock (CLK16) */
+	/* PC15 */ {   0,   1,	 0,   0,   0,	0   }, /* PC15 */
+	/* PC14 */ {   0,   1,	 0,   0,   0,	0   }, /* SCC1 EN *CD */
+	/* PC13 */ {   0,   0,	 0,   1,   0,	0   }, /* PC13 */
+	/* PC12 */ {   0,   1,	 0,   1,   0,	0   }, /* PC12 */
+	/* PC11 */ {   0,   0,	 0,   1,   0,	0   }, /* LXT971 transmit control */
+	/* PC10 */ {   0,   0,	 0,   1,   0,	0   }, /* FETHMDC */
+	/* PC9	*/ {   0,   0,	 0,   0,   0,	0   }, /* FETHMDIO */
+	/* PC8	*/ {   0,   0,	 0,   1,   0,	0   }, /* PC8 */
+	/* PC7	*/ {   0,   0,	 0,   1,   0,	0   }, /* PC7 */
+	/* PC6	*/ {   0,   0,	 0,   1,   0,	0   }, /* PC6 */
+	/* PC5	*/ {   0,   0,	 0,   1,   0,	0   }, /* PC5 */
+	/* PC4	*/ {   0,   0,	 0,   1,   0,	0   }, /* PC4 */
+	/* PC3	*/ {   0,   0,	 0,   1,   0,	0   }, /* PC3 */
+	/* PC2	*/ {   0,   0,	 0,   1,   0,	1   }, /* ENET FDE */
+	/* PC1	*/ {   0,   0,	 0,   1,   0,	0   }, /* ENET DSQE */
+	/* PC0	*/ {   0,   0,	 0,   1,   0,	0   }, /* ENET LBK */
     },
 
     /* Port D */
-    {   /*            conf ppar psor pdir podr pdat */
-	/* PD31 */ {   0,   1,   0,   0,   0,   0   }, /* SCC1 EN RxD */
-	/* PD30 */ {   0,   1,   1,   1,   0,   0   }, /* SCC1 EN TxD */
-	/* PD29 */ {   0,   1,   0,   1,   0,   0   }, /* SCC1 EN TENA */
-	/* PD28 */ {   1,   1,   0,   0,   0,   0   }, /* SCC2 RxD */
-	/* PD27 */ {   1,   1,   0,   1,   0,   0   }, /* SCC2 TxD */
-	/* PD26 */ {   0,   0,   0,   1,   0,   0   }, /* PD26 */
-	/* PD25 */ {   0,   0,   0,   1,   0,   0   }, /* PD25 */
-	/* PD24 */ {   0,   0,   0,   1,   0,   0   }, /* PD24 */
-	/* PD23 */ {   0,   0,   0,   1,   0,   0   }, /* PD23 */
-	/* PD22 */ {   0,   0,   0,   1,   0,   0   }, /* PD22 */
-	/* PD21 */ {   0,   0,   0,   1,   0,   0   }, /* PD21 */
-	/* PD20 */ {   0,   0,   0,   1,   0,   0   }, /* PD20 */
-	/* PD19 */ {   0,   0,   0,   1,   0,   0   }, /* PD19 */
-	/* PD18 */ {   0,   0,   0,   1,   0,   0   }, /* PD18 */
-	/* PD17 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXPRTY */
-	/* PD16 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXPRTY */
-	/* PD15 */ {   1,   1,   1,   0,   1,   0   }, /* I2C SDA */
-	/* PD14 */ {   1,   1,   1,   0,   0,   0   }, /* I2C CLK */
-	/* PD13 */ {   0,   0,   0,   0,   0,   0   }, /* PD13 */
-	/* PD12 */ {   0,   0,   0,   0,   0,   0   }, /* PD12 */
-	/* PD11 */ {   0,   0,   0,   0,   0,   0   }, /* PD11 */
-	/* PD10 */ {   0,   0,   0,   0,   0,   0   }, /* PD10 */
-	/* PD9  */ {   0,   1,   0,   1,   0,   0   }, /* SMC1 TXD */
-	/* PD8  */ {   0,   1,   0,   0,   0,   0   }, /* SMC1 RXD */
-	/* PD7  */ {   0,   0,   0,   1,   0,   1   }, /* PD7 */
-	/* PD6  */ {   0,   0,   0,   1,   0,   1   }, /* PD6 */
-	/* PD5  */ {   0,   0,   0,   1,   0,   1   }, /* PD5 */
-	/* PD4  */ {   0,   0,   0,   1,   0,   1   }, /* PD4 */
-	/* PD3  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
-	/* PD2  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
-	/* PD1  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
-	/* PD0  */ {   0,   0,   0,   0,   0,   0   }  /* pin doesn't exist */
+    {	/*	      conf ppar psor pdir podr pdat */
+	/* PD31 */ {   0,   1,	 0,   0,   0,	0   }, /* SCC1 EN RxD */
+	/* PD30 */ {   0,   1,	 1,   1,   0,	0   }, /* SCC1 EN TxD */
+	/* PD29 */ {   0,   1,	 0,   1,   0,	0   }, /* SCC1 EN TENA */
+	/* PD28 */ {   1,   1,	 0,   0,   0,	0   }, /* SCC2 RxD */
+	/* PD27 */ {   1,   1,	 0,   1,   0,	0   }, /* SCC2 TxD */
+	/* PD26 */ {   0,   0,	 0,   1,   0,	0   }, /* PD26 */
+	/* PD25 */ {   0,   0,	 0,   1,   0,	0   }, /* PD25 */
+	/* PD24 */ {   0,   0,	 0,   1,   0,	0   }, /* PD24 */
+	/* PD23 */ {   0,   0,	 0,   1,   0,	0   }, /* PD23 */
+	/* PD22 */ {   0,   0,	 0,   1,   0,	0   }, /* PD22 */
+	/* PD21 */ {   0,   0,	 0,   1,   0,	0   }, /* PD21 */
+	/* PD20 */ {   0,   0,	 0,   1,   0,	0   }, /* PD20 */
+	/* PD19 */ {   0,   0,	 0,   1,   0,	0   }, /* PD19 */
+	/* PD18 */ {   0,   0,	 0,   1,   0,	0   }, /* PD18 */
+	/* PD17 */ {   0,   1,	 0,   0,   0,	0   }, /* FCC1 ATMRXPRTY */
+	/* PD16 */ {   0,   1,	 0,   1,   0,	0   }, /* FCC1 ATMTXPRTY */
+	/* PD15 */ {   1,   1,	 1,   0,   1,	0   }, /* I2C SDA */
+	/* PD14 */ {   1,   1,	 1,   0,   0,	0   }, /* I2C CLK */
+	/* PD13 */ {   0,   0,	 0,   0,   0,	0   }, /* PD13 */
+	/* PD12 */ {   0,   0,	 0,   0,   0,	0   }, /* PD12 */
+	/* PD11 */ {   0,   0,	 0,   0,   0,	0   }, /* PD11 */
+	/* PD10 */ {   0,   0,	 0,   0,   0,	0   }, /* PD10 */
+	/* PD9	*/ {   0,   1,	 0,   1,   0,	0   }, /* SMC1 TXD */
+	/* PD8	*/ {   0,   1,	 0,   0,   0,	0   }, /* SMC1 RXD */
+	/* PD7	*/ {   0,   0,	 0,   1,   0,	1   }, /* PD7 */
+	/* PD6	*/ {   0,   0,	 0,   1,   0,	1   }, /* PD6 */
+	/* PD5	*/ {   0,   0,	 0,   1,   0,	1   }, /* PD5 */
+	/* PD4	*/ {   0,   0,	 0,   1,   0,	1   }, /* PD4 */
+	/* PD3	*/ {   0,   0,	 0,   0,   0,	0   }, /* pin doesn't exist */
+	/* PD2	*/ {   0,   0,	 0,   0,   0,	0   }, /* pin doesn't exist */
+	/* PD1	*/ {   0,   0,	 0,   0,   0,	0   }, /* pin doesn't exist */
+	/* PD0	*/ {   0,   0,	 0,   0,   0,	0   }  /* pin doesn't exist */
     }
 };
 
@@ -227,12 +227,12 @@ reset_phy(void)
 #if (CONFIG_ETHER_INDEX == 2)
 	bcsr->bcsr2 &= ~FETH2_RST;
 	udelay(2);
-	bcsr->bcsr2 |=  FETH2_RST;
+	bcsr->bcsr2 |=	FETH2_RST;
 	udelay(1000);
 #elif (CONFIG_ETHER_INDEX == 3)
 	bcsr->bcsr3 &= ~FETH3_RST;
 	udelay(2);
-	bcsr->bcsr3 |=  FETH3_RST;
+	bcsr->bcsr3 |=	FETH3_RST;
 	udelay(1000);
 #endif
 #if defined(CONFIG_MII) && defined(CONFIG_ETHER_ON_FCC)
@@ -252,10 +252,10 @@ int
 board_early_init_f(void)
 {
 #if defined(CONFIG_PCI)
-    volatile immap_t *immr = (immap_t *)CFG_IMMR;
-    volatile ccsr_pcix_t *pci = &immr->im_pcix;
+	volatile immap_t *immr = (immap_t *)CFG_IMMR;
+	volatile ccsr_pcix_t *pci = &immr->im_pcix;
 
-    pci->peer &= 0xfffffffdf; /* disable master abort */
+	pci->peer &= 0xffffffdf; /* disable master abort */
 #endif
 
 	/* Why is the phy reset done _after_ the ethernet

board/tqm5200/tqm5200.c

@@ -32,6 +32,10 @@
 #include <pci.h>
 #include <asm/processor.h>
 
+#if defined(CONFIG_OF_FLAT_TREE)
+#include <ft_build.h>
+#endif
+
 #ifdef CONFIG_VIDEO_SM501
 #include <sm501.h>
 #endif
@@ -775,3 +779,10 @@ int board_get_height (void)
 }
 
 #endif /* CONFIG_VIDEO_SM501 */
+
+#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP)
+void ft_board_setup(void *blob, bd_t *bd)
+{
+	ft_cpu_setup(blob, bd);
+}
+#endif /* defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP) */

board/xpedite1k/xpedite1k.c

@@ -209,7 +209,7 @@ long int fixed_sdram (void)
  *	certain pre-initialization actions.
  *
  ************************************************************************/
-#if defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT)
+#if defined(CONFIG_PCI)
 int pci_pre_init(struct pci_controller * hose )
 {
 	unsigned long strap;
@@ -227,7 +227,7 @@ int pci_pre_init(struct pci_controller * hose )
 #endif
 	return 1;
 }
-#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */
+#endif /* defined(CONFIG_PCI) */
 
 /*************************************************************************
  *  pci_target_init

common/Makefile

@@ -38,8 +38,8 @@ COBJS	= main.o ACEX1K.o altera.o bedbug.o circbuf.o cmd_autoscript.o \
 	  cmd_mem.o cmd_mii.o cmd_misc.o cmd_mmc.o \
 	  cmd_nand.o cmd_net.o cmd_nvedit.o \
 	  cmd_pci.o cmd_pcmcia.o cmd_portio.o \
-	  cmd_reginfo.o cmd_reiser.o cmd_scsi.o cmd_spi.o cmd_universe.o \
-	  cmd_usb.o cmd_vfd.o \
+	  cmd_reginfo.o cmd_reiser.o cmd_sata.o cmd_scsi.o cmd_spi.o \
+	  cmd_universe.o cmd_usb.o cmd_vfd.o \
 	  command.o console.o cyclon2.o devices.o dlmalloc.o docecc.o \
 	  environment.o env_common.o \
 	  env_nand.o env_dataflash.o env_flash.o env_eeprom.o \

common/cmd_doc.c

@@ -216,6 +216,7 @@ int do_docboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	image_header_t *hdr;
 	int rcode = 0;
 
+	SHOW_BOOT_PROGRESS (34);
 	switch (argc) {
 	case 1:
 		addr = CFG_LOAD_ADDR;
@@ -236,24 +237,27 @@ int do_docboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 		break;
 	default:
 		printf ("Usage:\n%s\n", cmdtp->usage);
-		SHOW_BOOT_PROGRESS (-1);
+		SHOW_BOOT_PROGRESS (-35);
 		return 1;
 	}
 
+	SHOW_BOOT_PROGRESS (35);
 	if (!boot_device) {
 		puts ("\n** No boot device **\n");
-		SHOW_BOOT_PROGRESS (-1);
+		SHOW_BOOT_PROGRESS (-36);
 		return 1;
 	}
+	SHOW_BOOT_PROGRESS (36);
 
 	dev = simple_strtoul(boot_device, &ep, 16);
 
 	if ((dev >= CFG_MAX_DOC_DEVICE) ||
 	    (doc_dev_desc[dev].ChipID == DOC_ChipID_UNKNOWN)) {
 		printf ("\n** Device %d not available\n", dev);
-		SHOW_BOOT_PROGRESS (-1);
+		SHOW_BOOT_PROGRESS (-37);
 		return 1;
 	}
+	SHOW_BOOT_PROGRESS (37);
 
 	printf ("\nLoading from device %d: %s at 0x%lX (offset 0x%lX)\n",
 		dev, doc_dev_desc[dev].name, doc_dev_desc[dev].physadr,
@@ -262,9 +266,10 @@ int do_docboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	if (doc_rw (doc_dev_desc + dev, 1, offset,
 		    SECTORSIZE, NULL, (u_char *)addr)) {
 		printf ("** Read error on %d\n", dev);
-		SHOW_BOOT_PROGRESS (-1);
+		SHOW_BOOT_PROGRESS (-38);
 		return 1;
 	}
+	SHOW_BOOT_PROGRESS (38);
 
 	hdr = (image_header_t *)addr;
 
@@ -276,16 +281,18 @@ int do_docboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 		cnt -= SECTORSIZE;
 	} else {
 		puts ("\n** Bad Magic Number **\n");
-		SHOW_BOOT_PROGRESS (-1);
+		SHOW_BOOT_PROGRESS (-39);
 		return 1;
 	}
+	SHOW_BOOT_PROGRESS (39);
 
 	if (doc_rw (doc_dev_desc + dev, 1, offset + SECTORSIZE, cnt,
 		    NULL, (u_char *)(addr+SECTORSIZE))) {
 		printf ("** Read error on %d\n", dev);
-		SHOW_BOOT_PROGRESS (-1);
+		SHOW_BOOT_PROGRESS (-40);
 		return 1;
 	}
+	SHOW_BOOT_PROGRESS (40);
 
 	/* Loading ok, update default load address */
 

common/cmd_ide.c

@@ -185,6 +185,9 @@ static void input_data(int dev, ulong *sect_buf, int words);
 static void output_data(int dev, ulong *sect_buf, int words);
 static void ident_cpy (unsigned char *dest, unsigned char *src, unsigned int len);
 
+#ifndef CFG_ATA_PORT_ADDR
+#define CFG_ATA_PORT_ADDR(port) (port)
+#endif
 
 #ifdef CONFIG_ATAPI
 static void	atapi_inquiry(block_dev_desc_t *dev_desc);
@@ -382,6 +385,7 @@ int do_diskboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	image_header_t *hdr;
 	int rcode = 0;
 
+	SHOW_BOOT_PROGRESS (41);
 	switch (argc) {
 	case 1:
 		addr = CFG_LOAD_ADDR;
@@ -397,44 +401,50 @@ int do_diskboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 		break;
 	default:
 		printf ("Usage:\n%s\n", cmdtp->usage);
-		SHOW_BOOT_PROGRESS (-1);
+		SHOW_BOOT_PROGRESS (-42);
 		return 1;
 	}
+	SHOW_BOOT_PROGRESS (42);
 
 	if (!boot_device) {
 		puts ("\n** No boot device **\n");
-		SHOW_BOOT_PROGRESS (-1);
+		SHOW_BOOT_PROGRESS (-43);
 		return 1;
 	}
+	SHOW_BOOT_PROGRESS (43);
 
 	dev = simple_strtoul(boot_device, &ep, 16);
 
 	if (ide_dev_desc[dev].type==DEV_TYPE_UNKNOWN) {
 		printf ("\n** Device %d not available\n", dev);
-		SHOW_BOOT_PROGRESS (-1);
+		SHOW_BOOT_PROGRESS (-44);
 		return 1;
 	}
+	SHOW_BOOT_PROGRESS (44);
 
 	if (*ep) {
 		if (*ep != ':') {
 			puts ("\n** Invalid boot device, use `dev[:part]' **\n");
-			SHOW_BOOT_PROGRESS (-1);
+			SHOW_BOOT_PROGRESS (-45);
 			return 1;
 		}
 		part = simple_strtoul(++ep, NULL, 16);
 	}
+	SHOW_BOOT_PROGRESS (45);
 	if (get_partition_info (&ide_dev_desc[dev], part, &info)) {
-		SHOW_BOOT_PROGRESS (-1);
+		SHOW_BOOT_PROGRESS (-46);
 		return 1;
 	}
+	SHOW_BOOT_PROGRESS (46);
 	if ((strncmp((char *)info.type, BOOT_PART_TYPE, sizeof(info.type)) != 0) &&
 	    (strncmp((char *)info.type, BOOT_PART_COMP, sizeof(info.type)) != 0)) {
 		printf ("\n** Invalid partition type \"%.32s\""
 			" (expect \"" BOOT_PART_TYPE "\")\n",
 			info.type);
-		SHOW_BOOT_PROGRESS (-1);
+		SHOW_BOOT_PROGRESS (-47);
 		return 1;
 	}
+	SHOW_BOOT_PROGRESS (47);
 
 	printf ("\nLoading from IDE device %d, partition %d: "
 		"Name: %.32s  Type: %.32s\n",
@@ -445,26 +455,29 @@ int do_diskboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 
 	if (ide_dev_desc[dev].block_read (dev, info.start, 1, (ulong *)addr) != 1) {
 		printf ("** Read error on %d:%d\n", dev, part);
-		SHOW_BOOT_PROGRESS (-1);
+		SHOW_BOOT_PROGRESS (-48);
 		return 1;
 	}
+	SHOW_BOOT_PROGRESS (48);
 
 	hdr = (image_header_t *)addr;
 
 	if (ntohl(hdr->ih_magic) != IH_MAGIC) {
 		printf("\n** Bad Magic Number **\n");
-		SHOW_BOOT_PROGRESS (-1);
+		SHOW_BOOT_PROGRESS (-49);
 		return 1;
 	}
+	SHOW_BOOT_PROGRESS (49);
 
 	checksum = ntohl(hdr->ih_hcrc);
 	hdr->ih_hcrc = 0;
 
 	if (crc32 (0, (uchar *)hdr, sizeof(image_header_t)) != checksum) {
 		puts ("\n** Bad Header Checksum **\n");
-		SHOW_BOOT_PROGRESS (-2);
+		SHOW_BOOT_PROGRESS (-50);
 		return 1;
 	}
+	SHOW_BOOT_PROGRESS (50);
 	hdr->ih_hcrc = htonl(checksum); /* restore checksum for later use */
 
 	print_image_hdr (hdr);
@@ -477,9 +490,10 @@ int do_diskboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	if (ide_dev_desc[dev].block_read (dev, info.start+1, cnt,
 		      (ulong *)(addr+info.blksz)) != cnt) {
 		printf ("** Read error on %d:%d\n", dev, part);
-		SHOW_BOOT_PROGRESS (-1);
+		SHOW_BOOT_PROGRESS (-51);
 		return 1;
 	}
+	SHOW_BOOT_PROGRESS (51);
 
 
 	/* Loading ok, update default load address */
@@ -807,13 +821,13 @@ ide_outb(int dev, int port, unsigned char val)
 
 	/* Ensure I/O operations complete */
 	EIEIO;
-	*((uchar *)(ATA_CURR_BASE(dev)+port)) = val;
+	*((u16 *)(ATA_CURR_BASE(dev)+CFG_ATA_PORT_ADDR(port))) = val;
 }
 #else	/* ! __PPC__ */
 static void __inline__
 ide_outb(int dev, int port, unsigned char val)
 {
-	outb(val, ATA_CURR_BASE(dev)+port);
+	outb(val, ATA_CURR_BASE(dev)+CFG_ATA_PORT_ADDR(port));
 }
 #endif	/* __PPC__ */
 
@@ -825,7 +839,7 @@ ide_inb(int dev, int port)
 	uchar val;
 	/* Ensure I/O operations complete */
 	EIEIO;
-	val = *((uchar *)(ATA_CURR_BASE(dev)+port));
+	val = *((u16 *)(ATA_CURR_BASE(dev)+CFG_ATA_PORT_ADDR(port)));
 	debug ("ide_inb (dev= %d, port= 0x%x) : @ 0x%08lx -> 0x%02x\n",
 		dev, port, (ATA_CURR_BASE(dev)+port), val);
 	return (val);
@@ -834,7 +848,7 @@ ide_inb(int dev, int port)
 static unsigned char __inline__
 ide_inb(int dev, int port)
 {
-  return inb(ATA_CURR_BASE(dev)+port);
+  return inb(ATA_CURR_BASE(dev)+CFG_ATA_PORT_ADDR(port));
 }
 #endif	/* __PPC__ */
 
@@ -891,6 +905,9 @@ input_swap_data(int dev, ulong *sect_buf, int words)
 #ifdef __MIPS__
 		*dbuf++ = swab16p((u16*)pbuf);
 		*dbuf++ = swab16p((u16*)pbuf);
+#elif defined(CONFIG_PCS440EP)
+		*dbuf++ = *pbuf;
+		*dbuf++ = *pbuf;
 #else
 		*dbuf++ = ld_le16(pbuf);
 		*dbuf++ = ld_le16(pbuf);
@@ -930,10 +947,18 @@ output_data(int dev, ulong *sect_buf, int words)
 	pbuf = (ushort *)(ATA_CURR_BASE(dev)+ATA_DATA_REG);
 	dbuf = (ushort *)sect_buf;
 	while (words--) {
+#if defined(CONFIG_PCS440EP)
+		/* not tested, because CF was write protected */
+		EIEIO;
+		*pbuf = ld_le16(dbuf++);
+		EIEIO;
+		*pbuf = ld_le16(dbuf++);
+#else
 		EIEIO;
 		*pbuf = *dbuf++;
 		EIEIO;
 		*pbuf = *dbuf++;
+#endif
 	}
 #endif
 }
@@ -981,10 +1006,17 @@ input_data(int dev, ulong *sect_buf, int words)
 	debug("in input data base for read is %lx\n", (unsigned long) pbuf);
 
 	while (words--) {
+#if defined(CONFIG_PCS440EP)
+		EIEIO;
+		*dbuf++ = ld_le16(pbuf);
+		EIEIO;
+		*dbuf++ = ld_le16(pbuf);
+#else
 		EIEIO;
 		*dbuf++ = *pbuf;
 		EIEIO;
 		*dbuf++ = *pbuf;
+#endif
 	}
 #endif
 }

common/cmd_log.c

@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2002
+ * (C) Copyright 2002-2007
  * Detlev Zundel, DENX Software Engineering, dzu@denx.de.
  *
  * Code used from linux/kernel/printk.c
@@ -60,45 +60,40 @@ static char buf[1024];
 /* This combination will not print messages with the default loglevel */
 static unsigned console_loglevel = 3;
 static unsigned default_message_loglevel = 4;
-static unsigned char *log_buf = NULL;
-static unsigned long *ext_log_size;
-static unsigned long *ext_log_start;
-static unsigned long *ext_logged_chars;
-#define log_size (*ext_log_size)
-#define log_start (*ext_log_start)
-#define logged_chars (*ext_logged_chars)
+static unsigned log_version = 1;
+static logbuff_t *log;
 
-/* Forced by code, eh! */
-#define LOGBUFF_MAGIC 0xc0de4ced
-
-/* The mapping used here has to be the same as in setup_ext_logbuff ()
-   in linux/kernel/printk */
 void logbuff_init_ptrs (void)
 {
-	unsigned long *ext_tag;
-	unsigned long post_word;
+	unsigned long tag, post_word;
 	char *s;
 
-	log_buf = (unsigned char *)(gd->bd->bi_memsize-LOGBUFF_LEN);
-	ext_tag = (unsigned long *)(log_buf)-4;
- 	ext_log_start = (unsigned long *)(log_buf)-3;
-	ext_log_size = (unsigned long *)(log_buf)-2;
-	ext_logged_chars = (unsigned long *)(log_buf)-1;
+	log = (logbuff_t *)(gd->bd->bi_memsize-LOGBUFF_LEN) - 1;
+
+	/* Set up log version */
+	if ((s = getenv ("logversion")) != NULL)
+		log_version = (int)simple_strtoul (s, NULL, 10);
+
+	if (log_version == 2)
+		tag = log->v2.tag;
+	else
+		tag = log->v1.tag;
 	post_word = post_word_load();
 #ifdef CONFIG_POST
 	/* The post routines have setup the word so we can simply test it */
- 	if (post_word_load () & POST_COLDBOOT) {
- 		logged_chars = log_size = log_start = 0;
-		*ext_tag = LOGBUFF_MAGIC;
- 	}
+	if (tag != LOGBUFF_MAGIC || (post_word & POST_COLDBOOT)) {
+		logbuff_reset ();
+	}
 #else
 	/* No post routines, so we do our own checking                    */
- 	if (post_word != LOGBUFF_MAGIC) {
- 		logged_chars = log_size = log_start = 0;
+	if (tag != LOGBUFF_MAGIC || post_word != LOGBUFF_MAGIC) {
+		logbuff_reset ();
 		post_word_store (LOGBUFF_MAGIC);
-		*ext_tag = LOGBUFF_MAGIC;
- 	}
+	}
 #endif
+	if (log_version == 2 && (long)log->v2.start > (long)log->v2.con)
+		log->v2.start = log->v2.con;
+
 	/* Initialize default loglevel if present */
 	if ((s = getenv ("loglevel")) != NULL)
 		console_loglevel = (int)simple_strtoul (s, NULL, 10);
@@ -106,6 +101,15 @@ void logbuff_init_ptrs (void)
 	gd->post_log_word |= LOGBUFF_INITIALIZED;
 }
 
+void logbuff_reset (void)
+{
+	memset (log, 0, sizeof (logbuff_t));
+	if (log_version == 2)
+		log->v2.tag = LOGBUFF_MAGIC;
+	else
+		log->v1.tag = LOGBUFF_MAGIC;
+}
+
 int drv_logbuff_init (void)
 {
 	device_t logdev;
@@ -162,7 +166,7 @@ void logbuff_log(char *msg)
 int do_log (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
 	char *s;
-	unsigned long i;
+	unsigned long i, start, size;
 
 	if (strcmp(argv[1],"append") == 0) {
 		/* Log concatenation of all arguments separated by spaces */
@@ -177,21 +181,34 @@ int do_log (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 
 	case 2:
 		if (strcmp(argv[1],"show") == 0) {
-			for (i=0; i < (log_size&LOGBUFF_MASK); i++) {
-				s = (char *)log_buf+((log_start+i)&LOGBUFF_MASK);
+			if (log_version == 2) {
+				start = log->v2.start;
+				size = log->v2.end - log->v2.start;
+			}
+			else {
+				start = log->v1.start;
+				size = log->v1.size;
+			}
+			for (i=0; i < (size&LOGBUFF_MASK); i++) {
+				s = (char *)log->buf+((start+i)&LOGBUFF_MASK);
 				putc (*s);
 			}
 			return 0;
 		} else if (strcmp(argv[1],"reset") == 0) {
-			log_start    = 0;
-			log_size     = 0;
-			logged_chars = 0;
+			logbuff_reset ();
 			return 0;
 		} else if (strcmp(argv[1],"info") == 0) {
-			printf ("Logbuffer   at  %08lx\n", (unsigned long)log_buf);
-			printf ("log_start    =  %08lx\n", log_start);
-			printf ("log_size     =  %08lx\n", log_size);
-			printf ("logged_chars =  %08lx\n", logged_chars);
+			printf ("Logbuffer   at  %08lx\n", (unsigned long)log->buf);
+			if (log_version == 2) {
+				printf ("log_start    =  %08lx\n", log->v2.start);
+				printf ("log_end      =  %08lx\n", log->v2.end);
+				printf ("logged_chars =  %08lx\n", log->v2.chars);
+			}
+			else {
+				printf ("log_start    =  %08lx\n", log->v1.start);
+				printf ("log_size     =  %08lx\n", log->v1.size);
+				printf ("logged_chars =  %08lx\n", log->v1.chars);
+			}
 			return 0;
 		}
 		printf ("Usage:\n%s\n", cmdtp->usage);
@@ -202,7 +219,7 @@ int do_log (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 		return 1;
 	}
 }
-#if defined(CONFIG_LOGBUFFER)
+
 U_BOOT_CMD(
 	log,     255,	1,	do_log,
 	"log     - manipulate logbuffer\n",
@@ -211,7 +228,7 @@ U_BOOT_CMD(
 	"log show   - show contents\n"
 	"log append <msg> - append <msg> to the logbuffer\n"
 );
-#endif	/* CONFIG_LOGBUFFER */
+
 static int logbuff_printk(const char *line)
 {
 	int i;
@@ -241,13 +258,22 @@ static int logbuff_printk(const char *line)
 		}
 		line_feed = 0;
 		for (; p < buf_end; p++) {
-			log_buf[(log_start+log_size) & LOGBUFF_MASK] = *p;
-			if (log_size < LOGBUFF_LEN)
-				log_size++;
-			else
-				log_start++;
-
-			logged_chars++;
+			if (log_version == 2) {
+				log->buf[log->v2.end & LOGBUFF_MASK] = *p;
+				log->v2.end++;
+				if (log->v2.end - log->v2.start > LOGBUFF_LEN)
+					log->v2.start++;
+				log->v2.chars++;
+			}
+			else {
+				log->buf[(log->v1.start + log->v1.size) &
+					 LOGBUFF_MASK] = *p;
+				if (log->v1.size < LOGBUFF_LEN)
+					log->v1.size++;
+				else
+					log->v1.start++;
+				log->v1.chars++;
+			}
 			if (*p == '\n') {
 				line_feed = 1;
 				break;

common/cmd_nand.c

@@ -486,17 +486,19 @@ static int nand_load_image(cmd_tbl_t *cmdtp, nand_info_t *nand,
 	r = nand_read(nand, offset, &cnt, (u_char *) addr);
 	if (r) {
 		puts("** Read error\n");
-		SHOW_BOOT_PROGRESS(-1);
+		SHOW_BOOT_PROGRESS(-56);
 		return 1;
 	}
+	SHOW_BOOT_PROGRESS(56);
 
 	hdr = (image_header_t *) addr;
 
 	if (ntohl(hdr->ih_magic) != IH_MAGIC) {
 		printf("\n** Bad Magic Number 0x%x **\n", hdr->ih_magic);
-		SHOW_BOOT_PROGRESS(-1);
+		SHOW_BOOT_PROGRESS(-57);
 		return 1;
 	}
+	SHOW_BOOT_PROGRESS(57);
 
 	print_image_hdr(hdr);
 
@@ -505,9 +507,10 @@ static int nand_load_image(cmd_tbl_t *cmdtp, nand_info_t *nand,
 	r = nand_read(nand, offset, &cnt, (u_char *) addr);
 	if (r) {
 		puts("** Read error\n");
-		SHOW_BOOT_PROGRESS(-1);
+		SHOW_BOOT_PROGRESS(-58);
 		return 1;
 	}
+	SHOW_BOOT_PROGRESS(58);
 
 	/* Loading ok, update default load address */
 
@@ -559,6 +562,7 @@ int do_nandboot(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 	}
 #endif
 
+	SHOW_BOOT_PROGRESS(52);
 	switch (argc) {
 	case 1:
 		addr = CFG_LOAD_ADDR;
@@ -582,23 +586,26 @@ int do_nandboot(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 usage:
 #endif
 		printf("Usage:\n%s\n", cmdtp->usage);
-		SHOW_BOOT_PROGRESS(-1);
+		SHOW_BOOT_PROGRESS(-53);
 		return 1;
 	}
 
+	SHOW_BOOT_PROGRESS(53);
 	if (!boot_device) {
 		puts("\n** No boot device **\n");
-		SHOW_BOOT_PROGRESS(-1);
+		SHOW_BOOT_PROGRESS(-54);
 		return 1;
 	}
+	SHOW_BOOT_PROGRESS(54);
 
 	idx = simple_strtoul(boot_device, NULL, 16);
 
 	if (idx < 0 || idx >= CFG_MAX_NAND_DEVICE || !nand_info[idx].name) {
 		printf("\n** Device %d not available\n", idx);
-		SHOW_BOOT_PROGRESS(-1);
+		SHOW_BOOT_PROGRESS(-55);
 		return 1;
 	}
+	SHOW_BOOT_PROGRESS(55);
 
 	return nand_load_image(cmdtp, &nand_info[idx], offset, addr, argv[0]);
 }
@@ -887,6 +894,7 @@ int do_nandboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	ulong offset = 0;
 	image_header_t *hdr;
 	int rcode = 0;
+	SHOW_BOOT_PROGRESS(52);
 	switch (argc) {
 	case 1:
 		addr = CFG_LOAD_ADDR;
@@ -907,24 +915,27 @@ int do_nandboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 		break;
 	default:
 		printf ("Usage:\n%s\n", cmdtp->usage);
-		SHOW_BOOT_PROGRESS (-1);
+		SHOW_BOOT_PROGRESS (-53);
 		return 1;
 	}
 
+	SHOW_BOOT_PROGRESS(53);
 	if (!boot_device) {
 		puts ("\n** No boot device **\n");
-		SHOW_BOOT_PROGRESS (-1);
+		SHOW_BOOT_PROGRESS (-54);
 		return 1;
 	}
+	SHOW_BOOT_PROGRESS(54);
 
 	dev = simple_strtoul(boot_device, &ep, 16);
 
 	if ((dev >= CFG_MAX_NAND_DEVICE) ||
 	    (nand_dev_desc[dev].ChipID == NAND_ChipID_UNKNOWN)) {
 		printf ("\n** Device %d not available\n", dev);
-		SHOW_BOOT_PROGRESS (-1);
+		SHOW_BOOT_PROGRESS (-55);
 		return 1;
 	}
+	SHOW_BOOT_PROGRESS(55);
 
 	printf ("\nLoading from device %d: %s at 0x%lx (offset 0x%lx)\n",
 		dev, nand_dev_desc[dev].name, nand_dev_desc[dev].IO_ADDR,
@@ -933,9 +944,10 @@ int do_nandboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	if (nand_legacy_rw (nand_dev_desc + dev, NANDRW_READ, offset,
 			SECTORSIZE, NULL, (u_char *)addr)) {
 		printf ("** Read error on %d\n", dev);
-		SHOW_BOOT_PROGRESS (-1);
+		SHOW_BOOT_PROGRESS (-56);
 		return 1;
 	}
+	SHOW_BOOT_PROGRESS(56);
 
 	hdr = (image_header_t *)addr;
 
@@ -947,17 +959,19 @@ int do_nandboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 		cnt -= SECTORSIZE;
 	} else {
 		printf ("\n** Bad Magic Number 0x%x **\n", ntohl(hdr->ih_magic));
-		SHOW_BOOT_PROGRESS (-1);
+		SHOW_BOOT_PROGRESS (-57);
 		return 1;
 	}
+	SHOW_BOOT_PROGRESS(57);
 
 	if (nand_legacy_rw (nand_dev_desc + dev, NANDRW_READ,
 			offset + SECTORSIZE, cnt, NULL,
 			(u_char *)(addr+SECTORSIZE))) {
 		printf ("** Read error on %d\n", dev);
-		SHOW_BOOT_PROGRESS (-1);
+		SHOW_BOOT_PROGRESS (-58);
 		return 1;
 	}
+	SHOW_BOOT_PROGRESS(58);
 
 	/* Loading ok, update default load address */
 

common/cmd_net.c

@@ -30,6 +30,13 @@
 
 #if (CONFIG_COMMANDS & CFG_CMD_NET)
 
+#ifdef CONFIG_SHOW_BOOT_PROGRESS
+# include <status_led.h>
+extern void show_boot_progress (int val);
+# define SHOW_BOOT_PROGRESS(arg)	show_boot_progress (arg)
+#else
+# define SHOW_BOOT_PROGRESS(arg)
+#endif
 
 extern int do_bootm (cmd_tbl_t *, int, int, char *[]);
 
@@ -184,18 +191,25 @@ netboot_common (proto_t proto, cmd_tbl_t *cmdtp, int argc, char *argv[])
 		break;
 
 	default: printf ("Usage:\n%s\n", cmdtp->usage);
+		SHOW_BOOT_PROGRESS(-80);
 		return 1;
 	}
 
-	if ((size = NetLoop(proto)) < 0)
+	SHOW_BOOT_PROGRESS(80);
+	if ((size = NetLoop(proto)) < 0) {
+		SHOW_BOOT_PROGRESS(-81);
 		return 1;
+	}
 
+	SHOW_BOOT_PROGRESS(81);
 	/* NetLoop ok, update environment */
 	netboot_update_env();
 
 	/* done if no file was loaded (no errors though) */
-	if (size == 0)
+	if (size == 0) {
+		SHOW_BOOT_PROGRESS(-82);
 		return 0;
+	}
 
 	/* flush cache */
 	flush_cache(load_addr, size);
@@ -208,14 +222,22 @@ netboot_common (proto_t proto, cmd_tbl_t *cmdtp, int argc, char *argv[])
 
 		printf ("Automatic boot of image at addr 0x%08lX ...\n",
 			load_addr);
+		SHOW_BOOT_PROGRESS(82);
 		rcode = do_bootm (cmdtp, 0, 1, local_args);
 	}
 
 #ifdef CONFIG_AUTOSCRIPT
 	if (((s = getenv("autoscript")) != NULL) && (strcmp(s,"yes") == 0)) {
 		printf("Running autoscript at addr 0x%08lX ...\n", load_addr);
+		SHOW_BOOT_PROGRESS(83);
 		rcode = autoscript (load_addr);
 	}
+#endif
+#if defined(CONFIG_SHOW_BOOT_PROGRESS)
+	if (rcode < 0)
+		SHOW_BOOT_PROGRESS(-83);
+	else
+		SHOW_BOOT_PROGRESS(84);
 #endif
 	return rcode;
 }

common/cmd_reiser.c

@@ -90,7 +90,7 @@ int do_reiserls (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	}
 
 	if (!reiserfs_mount(part_length)) {
-		printf ("** Bad Reisefs partition or disk - %s %d:%d **\n",  argv[1], dev, part);
+		printf ("** Bad Reiserfs partition or disk - %s %d:%d **\n",  argv[1], dev, part);
 		return 1;
 	}
 
@@ -183,7 +183,7 @@ int do_reiserload (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 			return 1;
 		}
 
-		if (strncmp(info.type, BOOT_PART_TYPE, sizeof(info.type)) != 0) {
+		if (strncmp((char *)info.type, BOOT_PART_TYPE, sizeof(info.type)) != 0) {
 			printf ("\n** Invalid partition type \"%.32s\""
 				" (expect \"" BOOT_PART_TYPE "\")\n",
 				info.type);
@@ -204,7 +204,7 @@ int do_reiserload (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	}
 
 	if (!reiserfs_mount(part_length)) {
-		printf ("** Bad Reisefs partition or disk - %s %d:%d **\n",  argv[1], dev, part);
+		printf ("** Bad Reiserfs partition or disk - %s %d:%d **\n",  argv[1], dev, part);
 		return 1;
 	}
 

common/cmd_sata.c

@@ -0,0 +1,712 @@
+/*
+ * Copyright (C) Procsys. All rights reserved.
+ * Author: Mushtaq Khan <mushtaq_k@procsys.com>
+ *			<mushtaqk_921@yahoo.co.in>
+ *
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * with the reference to libata in kernel 2.4.32
+ *
+ */
+
+/*
+ * File contains SATA read-write and other utility functions.
+ */
+#include <common.h>
+#include <asm/io.h>
+#include <pci.h>
+#include <command.h>
+#include <config.h>
+#include <ide.h>
+#include <ata.h>
+
+#ifdef CFG_SATA_SUPPORTED
+/*For debug prints set macro DEBUG_SATA to 1 */
+#define DEBUG_SATA 0
+/*Macro for SATA library specific declarations */
+#define SATA_DECL
+#include <sata.h>
+#undef SATA_DECL
+
+static u8 __inline__
+sata_inb (unsigned long ioaddr)
+{
+	return inb (ioaddr);
+}
+
+static void __inline__
+sata_outb (unsigned char val, unsigned long ioaddr)
+{
+	outb (val, ioaddr);
+}
+
+static void
+output_data (struct sata_ioports *ioaddr, ulong * sect_buf, int words)
+{
+	outsw (ioaddr->data_addr, sect_buf, words << 1);
+}
+
+static int
+input_data (struct sata_ioports *ioaddr, ulong * sect_buf, int words)
+{
+	insw (ioaddr->data_addr, sect_buf, words << 1);
+	return 0;
+}
+
+static void
+sata_cpy (unsigned char *dst, unsigned char *src, unsigned int len)
+{
+	unsigned char *end, *last;
+
+	last = dst;
+	end = src + len - 1;
+
+	/* reserve space for '\0' */
+	if (len < 2)
+		goto OUT;
+
+	/* skip leading white space */
+	while ((*src) && (src < end) && (*src == ' '))
+		++src;
+
+	/* copy string, omitting trailing white space */
+	while ((*src) && (src < end)) {
+		*dst++ = *src;
+		if (*src++ != ' ')
+			last = dst;
+	}
+      OUT:
+	*last = '\0';
+}
+
+int
+sata_bus_softreset (int num)
+{
+	u8 dev = 0, status = 0, i;
+
+	port[num].dev_mask = 0;
+
+	for (i = 0; i < CFG_SATA_DEVS_PER_BUS; i++) {
+		if (!(sata_devchk (&port[num].ioaddr, i))) {
+			PRINTF ("dev_chk failed for dev#%d\n", i);
+		} else {
+			port[num].dev_mask |= (1 << i);
+			PRINTF ("dev_chk passed for dev#%d\n", i);
+		}
+	}
+
+	if (!(port[num].dev_mask)) {
+		printf ("no devices on port%d\n", num);
+		return 1;
+	}
+
+	dev_select (&port[num].ioaddr, dev);
+
+	port[num].ctl_reg = 0x08;	/*Default value of control reg */
+	sata_outb (port[num].ctl_reg, port[num].ioaddr.ctl_addr);
+	udelay (10);
+	sata_outb (port[num].ctl_reg | ATA_SRST, port[num].ioaddr.ctl_addr);
+	udelay (10);
+	sata_outb (port[num].ctl_reg, port[num].ioaddr.ctl_addr);
+
+	/* spec mandates ">= 2ms" before checking status.
+	 * We wait 150ms, because that was the magic delay used for
+	 * ATAPI devices in Hale Landis's ATADRVR, for the period of time
+	 * between when the ATA command register is written, and then
+	 * status is checked.  Because waiting for "a while" before
+	 * checking status is fine, post SRST, we perform this magic
+	 * delay here as well.
+	 */
+	msleep (150);
+	status = sata_busy_wait (&port[num].ioaddr, ATA_BUSY, 300);
+	while ((status & ATA_BUSY)) {
+		msleep (100);
+		status = sata_busy_wait (&port[num].ioaddr, ATA_BUSY, 3);
+	}
+
+	if (status & ATA_BUSY)
+		printf ("ata%u is slow to respond,plz be patient\n", port);
+
+	while ((status & ATA_BUSY)) {
+		msleep (100);
+		status = sata_chk_status (&port[num].ioaddr);
+	}
+
+	if (status & ATA_BUSY) {
+		printf ("ata%u failed to respond : ", port);
+		printf ("bus reset failed\n");
+		return 1;
+	}
+	return 0;
+}
+
+void
+sata_identify (int num, int dev)
+{
+	u8 cmd = 0, status = 0, devno = num * CFG_SATA_DEVS_PER_BUS + dev;
+	u16 iobuf[ATA_SECT_SIZE];
+	u64 n_sectors = 0;
+	u8 mask = 0;
+
+	memset (iobuf, 0, sizeof (iobuf));
+	hd_driveid_t *iop = (hd_driveid_t *) iobuf;
+
+	if (dev == 0)
+		mask = 0x01;
+	else
+		mask = 0x02;
+
+	if (!(port[num].dev_mask & mask)) {
+		printf ("dev%d is not present on port#%d\n", dev, num);
+		return;
+	}
+
+	printf ("port=%d dev=%d\n", num, dev);
+
+	dev_select (&port[num].ioaddr, dev);
+
+	status = 0;
+	cmd = ATA_CMD_IDENT;	/*Device Identify Command */
+	sata_outb (cmd, port[num].ioaddr.command_addr);
+	sata_inb (port[num].ioaddr.altstatus_addr);
+	udelay (10);
+
+	status = sata_busy_wait (&port[num].ioaddr, ATA_BUSY, 1000);
+	if (status & ATA_ERR) {
+		printf ("\ndevice not responding\n");
+		port[num].dev_mask &= ~mask;
+		return;
+	}
+
+	input_data (&port[num].ioaddr, (ulong *) iobuf, ATA_SECTORWORDS);
+
+	PRINTF ("\nata%u: dev %u cfg 49:%04x 82:%04x 83:%04x 84:%04x85:%04x"
+		"86:%04x" "87:%04x 88:%04x\n", num, dev, iobuf[49],
+		iobuf[82], iobuf[83], iobuf[84], iobuf[85], iobuf[86],
+		iobuf[87], iobuf[88]);
+
+	/* we require LBA and DMA support (bits 8 & 9 of word 49) */
+	if (!ata_id_has_dma (iobuf) || !ata_id_has_lba (iobuf)) {
+		PRINTF ("ata%u: no dma/lba\n", num);
+	}
+	ata_dump_id (iobuf);
+
+	if (ata_id_has_lba48 (iobuf)) {
+		n_sectors = ata_id_u64 (iobuf, 100);
+	} else {
+		n_sectors = ata_id_u32 (iobuf, 60);
+	}
+	PRINTF ("no. of sectors %u\n", ata_id_u64 (iobuf, 100));
+	PRINTF ("no. of sectors %u\n", ata_id_u32 (iobuf, 60));
+
+	if (n_sectors == 0) {
+		port[num].dev_mask &= ~mask;
+		return;
+	}
+
+	sata_cpy (sata_dev_desc[devno].revision, iop->fw_rev,
+		  sizeof (sata_dev_desc[devno].revision));
+	sata_cpy (sata_dev_desc[devno].vendor, iop->model,
+		  sizeof (sata_dev_desc[devno].vendor));
+	sata_cpy (sata_dev_desc[devno].product, iop->serial_no,
+		  sizeof (sata_dev_desc[devno].product));
+	strswab (sata_dev_desc[devno].revision);
+	strswab (sata_dev_desc[devno].vendor);
+
+	if ((iop->config & 0x0080) == 0x0080) {
+		sata_dev_desc[devno].removable = 1;
+	} else {
+		sata_dev_desc[devno].removable = 0;
+	}
+
+	sata_dev_desc[devno].lba = iop->lba_capacity;
+	PRINTF ("lba=0x%x", sata_dev_desc[devno].lba);
+
+#ifdef CONFIG_LBA48
+	if (iop->command_set_2 & 0x0400) {
+		sata_dev_desc[devno].lba48 = 1;
+		lba = (unsigned long long) iop->lba48_capacity[0] |
+		    ((unsigned long long) iop->lba48_capacity[1] << 16) |
+		    ((unsigned long long) iop->lba48_capacity[2] << 32) |
+		    ((unsigned long long) iop->lba48_capacity[3] << 48);
+	} else {
+		sata_dev_desc[devno].lba48 = 0;
+	}
+#endif
+
+	/* assuming HD */
+	sata_dev_desc[devno].type = DEV_TYPE_HARDDISK;
+	sata_dev_desc[devno].blksz = ATA_BLOCKSIZE;
+	sata_dev_desc[devno].lun = 0;	/* just to fill something in... */
+}
+
+void
+set_Feature_cmd (int num, int dev)
+{
+	u8 mask = 0x00, status = 0;
+
+	if (dev == 0)
+		mask = 0x01;
+	else
+		mask = 0x02;
+
+	if (!(port[num].dev_mask & mask)) {
+		PRINTF ("dev%d is not present on port#%d\n", dev, num);
+		return;
+	}
+
+	dev_select (&port[num].ioaddr, dev);
+
+	sata_outb (SETFEATURES_XFER, port[num].ioaddr.feature_addr);
+	sata_outb (XFER_PIO_4, port[num].ioaddr.nsect_addr);
+	sata_outb (0, port[num].ioaddr.lbal_addr);
+	sata_outb (0, port[num].ioaddr.lbam_addr);
+	sata_outb (0, port[num].ioaddr.lbah_addr);
+
+	sata_outb (ATA_DEVICE_OBS, port[num].ioaddr.device_addr);
+	sata_outb (ATA_CMD_SETF, port[num].ioaddr.command_addr);
+
+	udelay (50);
+	msleep (150);
+
+	status = sata_busy_wait (&port[num].ioaddr, ATA_BUSY, 5000);
+	if ((status & (ATA_STAT_BUSY | ATA_STAT_ERR))) {
+		printf ("Error  : status 0x%02x\n", status);
+		port[num].dev_mask &= ~mask;
+	}
+}
+
+void
+sata_port (struct sata_ioports *ioport)
+{
+	ioport->data_addr = ioport->cmd_addr + ATA_REG_DATA;
+	ioport->error_addr = ioport->cmd_addr + ATA_REG_ERR;
+	ioport->feature_addr = ioport->cmd_addr + ATA_REG_FEATURE;
+	ioport->nsect_addr = ioport->cmd_addr + ATA_REG_NSECT;
+	ioport->lbal_addr = ioport->cmd_addr + ATA_REG_LBAL;
+	ioport->lbam_addr = ioport->cmd_addr + ATA_REG_LBAM;
+	ioport->lbah_addr = ioport->cmd_addr + ATA_REG_LBAH;
+	ioport->device_addr = ioport->cmd_addr + ATA_REG_DEVICE;
+	ioport->status_addr = ioport->cmd_addr + ATA_REG_STATUS;
+	ioport->command_addr = ioport->cmd_addr + ATA_REG_CMD;
+}
+
+int
+sata_devchk (struct sata_ioports *ioaddr, int dev)
+{
+	u8 nsect, lbal;
+
+	dev_select (ioaddr, dev);
+
+	sata_outb (0x55, ioaddr->nsect_addr);
+	sata_outb (0xaa, ioaddr->lbal_addr);
+
+	sata_outb (0xaa, ioaddr->nsect_addr);
+	sata_outb (0x55, ioaddr->lbal_addr);
+
+	sata_outb (0x55, ioaddr->nsect_addr);
+	sata_outb (0xaa, ioaddr->lbal_addr);
+
+	nsect = sata_inb (ioaddr->nsect_addr);
+	lbal = sata_inb (ioaddr->lbal_addr);
+
+	if ((nsect == 0x55) && (lbal == 0xaa))
+		return 1;	/* we found a device */
+	else
+		return 0;	/* nothing found */
+}
+
+void
+dev_select (struct sata_ioports *ioaddr, int dev)
+{
+	u8 tmp = 0;
+
+	if (dev == 0)
+		tmp = ATA_DEVICE_OBS;
+	else
+		tmp = ATA_DEVICE_OBS | ATA_DEV1;
+
+	sata_outb (tmp, ioaddr->device_addr);
+	sata_inb (ioaddr->altstatus_addr);
+	udelay (5);
+}
+
+u8
+sata_busy_wait (struct sata_ioports *ioaddr, int bits, unsigned int max)
+{
+	u8 status;
+
+	do {
+		udelay (1000);
+		status = sata_chk_status (ioaddr);
+		max--;
+	} while ((status & bits) && (max > 0));
+
+	return status;
+}
+
+u8
+sata_chk_status (struct sata_ioports * ioaddr)
+{
+	return sata_inb (ioaddr->status_addr);
+}
+
+void
+msleep (int count)
+{
+	int i;
+
+	for (i = 0; i < count; i++)
+		udelay (1000);
+}
+
+ulong
+sata_read (int device, ulong blknr,lbaint_t blkcnt, void * buff)
+{
+	ulong n = 0, *buffer = (ulong *)buff;
+	u8 dev = 0, num = 0, mask = 0, status = 0;
+
+#ifdef CONFIG_LBA48
+	unsigned char lba48 = 0;
+
+	if (blknr & 0x0000fffff0000000) {
+		if (!sata_dev_desc[devno].lba48) {
+			printf ("Drive doesn't support 48-bit addressing\n");
+			return 0;
+		}
+		/* more than 28 bits used, use 48bit mode */
+		lba48 = 1;
+	}
+#endif
+	/*Port Number */
+	num = device / CFG_SATA_DEVS_PER_BUS;
+	/*dev on the port */
+	if (device >= CFG_SATA_DEVS_PER_BUS)
+		dev = device - CFG_SATA_DEVS_PER_BUS;
+	else
+		dev = device;
+
+	if (dev == 0)
+		mask = 0x01;
+	else
+		mask = 0x02;
+
+	if (!(port[num].dev_mask & mask)) {
+		printf ("dev%d is not present on port#%d\n", dev, num);
+		return 0;
+	}
+
+	/* Select device */
+	dev_select (&port[num].ioaddr, dev);
+
+	status = sata_busy_wait (&port[num].ioaddr, ATA_BUSY, 500);
+	if (status & ATA_BUSY) {
+		printf ("ata%u failed to respond\n", port[num].port_no);
+		return n;
+	}
+	while (blkcnt-- > 0) {
+		status = sata_busy_wait (&port[num].ioaddr, ATA_BUSY, 500);
+		if (status & ATA_BUSY) {
+			printf ("ata%u failed to respond\n", 0);
+			return n;
+		}
+#ifdef CONFIG_LBA48
+		if (lba48) {
+			/* write high bits */
+			sata_outb (0, port[num].ioaddr.nsect_addr);
+			sata_outb ((blknr >> 24) & 0xFF,
+				   port[num].ioaddr.lbal_addr);
+			sata_outb ((blknr >> 32) & 0xFF,
+				   port[num].ioaddr.lbam_addr);
+			sata_outb ((blknr >> 40) & 0xFF,
+				   port[num].ioaddr.lbah_addr);
+		}
+#endif
+		sata_outb (1, port[num].ioaddr.nsect_addr);
+		sata_outb (((blknr) >> 0) & 0xFF,
+			   port[num].ioaddr.lbal_addr);
+		sata_outb ((blknr >> 8) & 0xFF, port[num].ioaddr.lbam_addr);
+		sata_outb ((blknr >> 16) & 0xFF, port[num].ioaddr.lbah_addr);
+
+#ifdef CONFIG_LBA48
+		if (lba48) {
+			sata_outb (ATA_LBA, port[num].ioaddr.device_addr);
+			sata_outb (ATA_CMD_READ_EXT,
+				   port[num].ioaddr.command_addr);
+		} else
+#endif
+		{
+			sata_outb (ATA_LBA | ((blknr >> 24) & 0xF),
+				   port[num].ioaddr.device_addr);
+			sata_outb (ATA_CMD_READ,
+				   port[num].ioaddr.command_addr);
+		}
+
+		msleep (50);
+		/*may take up to 4 sec */
+		status = sata_busy_wait (&port[num].ioaddr, ATA_BUSY, 4000);
+
+		if ((status & (ATA_STAT_DRQ | ATA_STAT_BUSY | ATA_STAT_ERR))
+		    != ATA_STAT_DRQ) {
+			u8 err = 0;
+
+			printf ("Error no DRQ dev %d blk %ld: sts 0x%02x\n",
+				device, (ulong) blknr, status);
+			err = sata_inb (port[num].ioaddr.error_addr);
+			printf ("Error reg = 0x%x\n", err);
+			return (n);
+		}
+		input_data (&port[num].ioaddr, buffer, ATA_SECTORWORDS);
+		sata_inb (port[num].ioaddr.altstatus_addr);
+		udelay (50);
+
+		++n;
+		++blknr;
+		buffer += ATA_SECTORWORDS;
+	}
+	return n;
+}
+
+ulong
+sata_write (int device, ulong blknr,lbaint_t blkcnt, void * buff)
+{
+	ulong n = 0, *buffer = (ulong *)buff;
+	unsigned char status = 0, num = 0, dev = 0, mask = 0;
+
+#ifdef CONFIG_LBA48
+	unsigned char lba48 = 0;
+
+	if (blknr & 0x0000fffff0000000) {
+		if (!sata_dev_desc[devno].lba48) {
+			printf ("Drive doesn't support 48-bit addressing\n");
+			return 0;
+		}
+		/* more than 28 bits used, use 48bit mode */
+		lba48 = 1;
+	}
+#endif
+	/*Port Number */
+	num = device / CFG_SATA_DEVS_PER_BUS;
+	/*dev on the Port */
+	if (device >= CFG_SATA_DEVS_PER_BUS)
+		dev = device - CFG_SATA_DEVS_PER_BUS;
+	else
+		dev = device;
+
+	if (dev == 0)
+		mask = 0x01;
+	else
+		mask = 0x02;
+
+	/* Select device */
+	dev_select (&port[num].ioaddr, dev);
+
+	status = sata_busy_wait (&port[num].ioaddr, ATA_BUSY, 500);
+	if (status & ATA_BUSY) {
+		printf ("ata%u failed to respond\n", port[num].port_no);
+		return n;
+	}
+
+	while (blkcnt-- > 0) {
+		status = sata_busy_wait (&port[num].ioaddr, ATA_BUSY, 500);
+		if (status & ATA_BUSY) {
+			printf ("ata%u failed to respond\n",
+				port[num].port_no);
+			return n;
+		}
+#ifdef CONFIG_LBA48
+		if (lba48) {
+			/* write high bits */
+			sata_outb (0, port[num].ioaddr.nsect_addr);
+			sata_outb ((blknr >> 24) & 0xFF,
+				   port[num].ioaddr.lbal_addr);
+			sata_outb ((blknr >> 32) & 0xFF,
+				   port[num].ioaddr.lbam_addr);
+			sata_outb ((blknr >> 40) & 0xFF,
+				   port[num].ioaddr.lbah_addr);
+		}
+#endif
+		sata_outb (1, port[num].ioaddr.nsect_addr);
+		sata_outb ((blknr >> 0) & 0xFF, port[num].ioaddr.lbal_addr);
+		sata_outb ((blknr >> 8) & 0xFF, port[num].ioaddr.lbam_addr);
+		sata_outb ((blknr >> 16) & 0xFF, port[num].ioaddr.lbah_addr);
+#ifdef CONFIG_LBA48
+		if (lba48) {
+			sata_outb (ATA_LBA, port[num].ioaddr.device_addr);
+			sata_outb (ATA_CMD_WRITE_EXT,
+				   port[num].ioaddr.command_addr);
+		} else
+#endif
+		{
+			sata_outb (ATA_LBA | ((blknr >> 24) & 0xF),
+				   port[num].ioaddr.device_addr);
+			sata_outb (ATA_CMD_WRITE,
+				   port[num].ioaddr.command_addr);
+		}
+
+		msleep (50);
+		/*may take up to 4 sec */
+		status = sata_busy_wait (&port[num].ioaddr, ATA_BUSY, 4000);
+		if ((status & (ATA_STAT_DRQ | ATA_STAT_BUSY | ATA_STAT_ERR))
+		    != ATA_STAT_DRQ) {
+			printf ("Error no DRQ dev %d blk %ld: sts 0x%02x\n",
+				device, (ulong) blknr, status);
+			return (n);
+		}
+
+		output_data (&port[num].ioaddr, buffer, ATA_SECTORWORDS);
+		sata_inb (port[num].ioaddr.altstatus_addr);
+		udelay (50);
+
+		++n;
+		++blknr;
+		buffer += ATA_SECTORWORDS;
+	}
+	return n;
+}
+
+block_dev_desc_t *sata_get_dev (int dev);
+
+block_dev_desc_t *
+sata_get_dev (int dev)
+{
+	return ((block_dev_desc_t *) & sata_dev_desc[dev]);
+}
+
+int
+do_sata (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+{
+
+	switch (argc) {
+	case 0:
+	case 1:
+		printf ("Usage:\n%s\n", cmdtp->usage);
+		return 1;
+	case 2:
+		if (strncmp (argv[1], "init", 4) == 0) {
+			int rcode = 0;
+
+			rcode = init_sata ();
+			if (rcode)
+				printf ("Sata initialization Failed\n");
+			return rcode;
+		} else if (strncmp (argv[1], "inf", 3) == 0) {
+			int i;
+
+			putc ('\n');
+			for (i = 0; i < CFG_SATA_MAXDEVICES; ++i) {
+				/*List only known devices */
+				if (sata_dev_desc[i].type ==
+				    DEV_TYPE_UNKNOWN)
+					continue;
+				printf ("sata dev %d: ", i);
+				dev_print (&sata_dev_desc[i]);
+			}
+			return 0;
+		}
+		printf ("Usage:\n%s\n", cmdtp->usage);
+		return 1;
+	case 3:
+		if (strcmp (argv[1], "dev") == 0) {
+			int dev = (int) simple_strtoul (argv[2], NULL, 10);
+
+			if (dev >= CFG_SATA_MAXDEVICES) {
+				printf ("\nSata dev %d not available\n",
+					dev);
+				return 1;
+			}
+			printf ("\nSATA dev %d: ", dev);
+			dev_print (&sata_dev_desc[dev]);
+			if (sata_dev_desc[dev].type == DEV_TYPE_UNKNOWN)
+				return 1;
+			curr_dev = dev;
+			return 0;
+		} else if (strcmp (argv[1], "part") == 0) {
+			int dev = (int) simple_strtoul (argv[2], NULL, 10);
+
+			if (dev >= CFG_SATA_MAXDEVICES) {
+				printf ("\nSata dev %d not available\n",
+					dev);
+				return 1;
+			}
+			PRINTF ("\nSATA dev %d: ", dev);
+			if (sata_dev_desc[dev].part_type !=
+			    PART_TYPE_UNKNOWN) {
+				print_part (&sata_dev_desc[dev]);
+			} else {
+				printf ("\nSata dev %d partition type "
+					"unknown\n", dev);
+				return 1;
+			}
+			return 0;
+		}
+		printf ("Usage:\n%s\n", cmdtp->usage);
+		return 1;
+	default:
+		if (argc < 5) {
+			printf ("Usage:\n%s\n", cmdtp->usage);
+			return 1;
+		}
+		if (strcmp (argv[1], "read") == 0) {
+			ulong addr = simple_strtoul (argv[2], NULL, 16);
+			ulong cnt = simple_strtoul (argv[4], NULL, 16);
+			ulong n;
+			lbaint_t blk = simple_strtoul (argv[3], NULL, 16);
+
+			memset ((int *) addr, 0, cnt * 512);
+			printf ("\nSATA read: dev %d blk # %ld,"
+				"count %ld ... ", curr_dev, blk, cnt);
+			n = sata_read (curr_dev, blk, cnt, (ulong *) addr);
+			/* flush cache after read */
+			flush_cache (addr, cnt * 512);
+			printf ("%ld blocks read: %s\n", n,
+				(n == cnt) ? "OK" : "ERR");
+			if (n == cnt)
+				return 1;
+			else
+				return 0;
+		} else if (strcmp (argv[1], "write") == 0) {
+			ulong addr = simple_strtoul (argv[2], NULL, 16);
+			ulong cnt = simple_strtoul (argv[4], NULL, 16);
+			ulong n;
+			lbaint_t blk = simple_strtoul (argv[3], NULL, 16);
+
+			printf ("\nSata write: dev %d blk # %ld,"
+				"count %ld ... ", curr_dev, blk, cnt);
+			n = sata_write (curr_dev, blk, cnt, (ulong *) addr);
+			printf ("%ld blocks written: %s\n", n,
+				(n == cnt) ? "OK" : "ERR");
+			if (n == cnt)
+				return 1;
+			else
+				return 0;
+		} else {
+			printf ("Usage:\n%s\n", cmdtp->usage);
+			return 1;
+		}
+	}			/*End OF SWITCH */
+}
+
+U_BOOT_CMD (sata, 5, 1, do_sata,
+	    "sata init\n"
+	    "sata info\n"
+	    "sata part device\n"
+	    "sata dev device\n"
+	    "sata read  addr blk# cnt\n"
+	    "sata write  addr blk# cnt\n", "cmd for init,rw and dev-info\n");
+
+#endif

common/env_common.c

@@ -232,7 +232,7 @@ void env_relocate (void)
 		puts ("Using default environment\n\n");
 #else
 		puts ("*** Warning - bad CRC, using default environment\n\n");
-		SHOW_BOOT_PROGRESS (-1);
+		SHOW_BOOT_PROGRESS (-60);
 #endif
 
 		if (sizeof(default_environment) > ENV_SIZE)

common/main.c

@@ -113,7 +113,7 @@ static __inline__ int abortboot(int bootdelay)
 	u_int i;
 
 #  ifdef CONFIG_AUTOBOOT_PROMPT
-	printf (CONFIG_AUTOBOOT_PROMPT, bootdelay);
+	printf(CONFIG_AUTOBOOT_PROMPT, bootdelay);
 #  endif
 
 #  ifdef CONFIG_AUTOBOOT_DELAY_STR
@@ -187,7 +187,7 @@ static __inline__ int abortboot(int bootdelay)
 	}
 #  if DEBUG_BOOTKEYS
 	if (!abort)
-		puts ("key timeout\n");
+		puts("key timeout\n");
 #  endif
 
 #ifdef CONFIG_SILENT_CONSOLE
@@ -244,13 +244,13 @@ static __inline__ int abortboot(int bootdelay)
 # endif
 				break;
 			}
-			udelay (10000);
+			udelay(10000);
 		}
 
-		printf ("\b\b\b%2d ", bootdelay);
+		printf("\b\b\b%2d ", bootdelay);
 	}
 
-	putc ('\n');
+	putc('\n');
 
 #ifdef CONFIG_SILENT_CONSOLE
 	if (abort)
@@ -962,7 +962,7 @@ int readline (const char *const prompt)
 			n = 0;
 			continue;
 
-		case 0x17:				/* ^W - erase word 	*/
+		case 0x17:				/* ^W - erase word	*/
 			p=delete_char(console_buffer, p, &col, &n, plen);
 			while ((n > 0) && (*p != ' ')) {
 				p=delete_char(console_buffer, p, &col, &n, plen);

cpu/74xx_7xx/start.S

@@ -125,7 +125,7 @@ _start_of_vectors:
 /* Alignment exception. */
 	. = 0x600
 Alignment:
-	EXCEPTION_PROLOG
+	EXCEPTION_PROLOG(SRR0, SRR1)
 	mfspr	r4,DAR
 	stw	r4,_DAR(r21)
 	mfspr	r5,DSISR
@@ -143,7 +143,7 @@ Alignment:
 /* Program check exception */
 	. = 0x700
 ProgramCheck:
-	EXCEPTION_PROLOG
+	EXCEPTION_PROLOG(SRR0, SRR1)
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	li	r20,MSR_KERNEL
 	rlwimi	r20,r23,0,16,16		/* copy EE bit from saved MSR */

cpu/i386/start.S

@@ -149,7 +149,7 @@ data_ok:
 .progress3:
 
 	/* clear bss section in ram, size must be 4-byte aligned  */
-	movl	$_i386boot_bss_start, %eax        /* BSS start */
+	movl	$_i386boot_bss_start, %edi        /* MK_CHG BSS start */
 	movl	$_i386boot_bss_size, %ecx         /* BSS size */
 	movl	%ecx, %eax
 	andl	$3, %eax

cpu/mpc5xx/start.S

@@ -155,7 +155,7 @@ in_flash:
 	/* Initialize some SPRs that are hard to access from C			*/
 	/*----------------------------------------------------------------------*/
 
-	lis     r3, CFG_IMMR@h          	/* Pass IMMR as arg1 to C routine */
+	lis     r3, CFG_IMMR@h			/* Pass IMMR as arg1 to C routine */
 	lis	r2, CFG_INIT_SP_ADDR@h
 	ori	r1, r2, CFG_INIT_SP_ADDR@l	/* Set up the stack in internal SRAM */
 	/* Note: R0 is still 0 here */
@@ -210,7 +210,7 @@ _start_of_vectors:
 /* Alignment exception. */
 	. = 0x600
 Alignment:
-	EXCEPTION_PROLOG
+	EXCEPTION_PROLOG(SRR0, SRR1)
 	mfspr	r4,DAR
 	stw	r4,_DAR(r21)
 	mfspr	r5,DSISR
@@ -228,7 +228,7 @@ Alignment:
 /* Program check exception */
 	. = 0x700
 ProgramCheck:
-	EXCEPTION_PROLOG
+	EXCEPTION_PROLOG(SRR0, SRR1)
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	li	r20,MSR_KERNEL
 	rlwimi	r20,r23,0,16,16		/* copy EE bit from saved MSR */

cpu/mpc5xxx/start.S

@@ -208,7 +208,7 @@ _start_of_vectors:
 /* Alignment exception. */
 	. = 0x600
 Alignment:
-	EXCEPTION_PROLOG
+	EXCEPTION_PROLOG(SRR0, SRR1)
 	mfspr	r4,DAR
 	stw	r4,_DAR(r21)
 	mfspr	r5,DSISR
@@ -227,7 +227,7 @@ Alignment:
 /* Program check exception */
 	. = 0x700
 ProgramCheck:
-	EXCEPTION_PROLOG
+	EXCEPTION_PROLOG(SRR0, SRR1)
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	li	r20,MSR_KERNEL
 	rlwimi	r20,r23,0,16,16		/* copy EE bit from saved MSR */

cpu/mpc8220/start.S

@@ -169,7 +169,7 @@ _start_of_vectors:
 /* Alignment exception. */
 	. = 0x600
 Alignment:
-	EXCEPTION_PROLOG
+	EXCEPTION_PROLOG(SRR0, SRR1)
 	mfspr	r4,DAR
 	stw	r4,_DAR(r21)
 	mfspr	r5,DSISR
@@ -188,7 +188,7 @@ Alignment:
 /* Program check exception */
 	. = 0x700
 ProgramCheck:
-	EXCEPTION_PROLOG
+	EXCEPTION_PROLOG(SRR0, SRR1)
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	li	r20,MSR_KERNEL
 	rlwimi	r20,r23,0,16,16	    /* copy EE bit from saved MSR */

cpu/mpc824x/start.S

@@ -220,7 +220,7 @@ _start_of_vectors:
 /* Alignment exception. */
 	. = EXC_OFF_ALIGN
 Alignment:
-	EXCEPTION_PROLOG
+	EXCEPTION_PROLOG(SRR0, SRR1)
 	mfspr	r4,DAR
 	stw	r4,_DAR(r21)
 	mfspr	r5,DSISR
@@ -238,7 +238,7 @@ Alignment:
 /* Program check exception */
 	. = EXC_OFF_PROGRAM
 ProgramCheck:
-	EXCEPTION_PROLOG
+	EXCEPTION_PROLOG(SRR0, SRR1)
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	li	r20,MSR_KERNEL
 	rlwimi	r20,r23,0,16,16		/* copy EE bit from saved MSR */

cpu/mpc8260/start.S

@@ -279,7 +279,7 @@ _start_of_vectors:
 /* Alignment exception. */
 	. = 0x600
 Alignment:
-	EXCEPTION_PROLOG
+	EXCEPTION_PROLOG(SRR0, SRR1)
 	mfspr	r4,DAR
 	stw	r4,_DAR(r21)
 	mfspr	r5,DSISR
@@ -298,7 +298,7 @@ Alignment:
 /* Program check exception */
 	. = 0x700
 ProgramCheck:
-	EXCEPTION_PROLOG
+	EXCEPTION_PROLOG(SRR0, SRR1)
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	li	r20,MSR_KERNEL
 	rlwimi	r20,r23,0,16,16		/* copy EE bit from saved MSR */
@@ -676,13 +676,13 @@ init_debug:
 	bdnz	1b
 
 	/* Load the Instruction Address Breakpoint Register (IABR).	*/
-	/* 								*/
+	/*								*/
 	/* The address to load is stored in the first word of dual port	*/
 	/* ram and should be preserved while the power is on, so you	*/
 	/* can plug addresses into that location then reset the cpu and	*/
 	/* this code will load that address into the IABR after the	*/
 	/* reset.							*/
-	/* 								*/
+	/*								*/
 	/* When the program counter matches the contents of the IABR,	*/
 	/* an exception is generated (before the instruction at that	*/
 	/* location completes). The vector for this exception is 0x1300 */

cpu/mpc83xx/cpu.c

@@ -415,7 +415,7 @@ static const struct {
 		"clock-frequency",
 		fdt_set_busfreq
 	},
-#ifdef CONFIG_MPC83XX_TSEC1
+#ifdef CONFIG_TSEC1
 	{	"/" OF_SOC "/ethernet@24000,
 		"mac-address",
 		fdt_set_eth0
@@ -425,7 +425,7 @@ static const struct {
 		fdt_set_eth0
 	},
 #endif
-#ifdef CONFIG_MPC83XX_TSEC2
+#ifdef CONFIG_TSEC2
 	{	"/" OF_SOC "/ethernet@25000,
 		"mac-address",
 		fdt_set_eth1
@@ -525,7 +525,7 @@ ft_cpu_setup(void *blob, bd_t *bd)
 	if (p != NULL)
 		*p = cpu_to_be32(clock);
 
-#ifdef CONFIG_MPC83XX_TSEC1
+#ifdef CONFIG_TSEC1
 	p = ft_get_prop(blob, "/" OF_SOC "/ethernet@24000/mac-address", &len);
 	if (p != NULL)
 		memcpy(p, bd->bi_enetaddr, 6);
@@ -535,7 +535,7 @@ ft_cpu_setup(void *blob, bd_t *bd)
 		memcpy(p, bd->bi_enetaddr, 6);
 #endif
 
-#ifdef CONFIG_MPC83XX_TSEC2
+#ifdef CONFIG_TSEC2
 	p = ft_get_prop(blob, "/" OF_SOC "/ethernet@25000/mac-address", &len);
 	if (p != NULL)
 		memcpy(p, bd->bi_enet1addr, 6);

cpu/mpc83xx/start.S

@@ -263,7 +263,7 @@ _start_of_vectors:
 /* Alignment exception. */
 	. = 0x600
 Alignment:
-	EXCEPTION_PROLOG
+	EXCEPTION_PROLOG(SRR0, SRR1)
 	mfspr	r4,DAR
 	stw	r4,_DAR(r21)
 	mfspr	r5,DSISR
@@ -282,7 +282,7 @@ Alignment:
 /* Program check exception */
 	. = 0x700
 ProgramCheck:
-	EXCEPTION_PROLOG
+	EXCEPTION_PROLOG(SRR0, SRR1)
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	li	r20,MSR_KERNEL
 	rlwimi	r20,r23,0,16,16		/* copy EE bit from saved MSR */

cpu/mpc85xx/cpu.c

@@ -280,7 +280,7 @@ ft_cpu_setup(void *blob, bd_t *bd)
 	if (p != NULL)
 		*p = cpu_to_be32(clock);
 
-#if defined(CONFIG_MPC85XX_TSEC1)
+#if defined(CONFIG_TSEC1)
 	p = ft_get_prop(blob, "/" OF_SOC "/ethernet@24000/mac-address", &len);
 	if (p)
 		memcpy(p, bd->bi_enetaddr, 6);

cpu/mpc85xx/start.S

@@ -457,7 +457,7 @@ _start_of_vectors:
 /* Alignment exception. */
 	. = 0x0600
 Alignment:
-	EXCEPTION_PROLOG
+	EXCEPTION_PROLOG(SRR0, SRR1)
 	mfspr	r4,DAR
 	stw	r4,_DAR(r21)
 	mfspr	r5,DSISR
@@ -475,7 +475,7 @@ Alignment:
 /* Program check exception */
 	. = 0x0700
 ProgramCheck:
-	EXCEPTION_PROLOG
+	EXCEPTION_PROLOG(SRR0, SRR1)
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	li	r20,MSR_KERNEL
 	rlwimi	r20,r23,0,16,16		/* copy EE bit from saved MSR */

cpu/mpc86xx/cpu.c

@@ -278,7 +278,7 @@ ft_cpu_setup(void *blob, bd_t *bd)
 	if (p != NULL)
 		*p = cpu_to_be32(clock);
 
-#if defined(CONFIG_MPC86XX_TSEC1)
+#if defined(CONFIG_TSEC1)
 	p = ft_get_prop(blob, "/" OF_SOC "/ethernet@24000/mac-address", &len);
 	if (p != NULL)
 		memcpy(p, bd->bi_enetaddr, 6);
@@ -287,7 +287,7 @@ ft_cpu_setup(void *blob, bd_t *bd)
 		memcpy(p, bd->bi_enetaddr, 6);
 #endif
 
-#if defined(CONFIG_MPC86XX_TSEC2)
+#if defined(CONFIG_TSEC2)
 	p = ft_get_prop(blob, "/" OF_SOC "/ethernet@25000/mac-address", &len);
 	if (p != NULL)
 		memcpy(p, bd->bi_enet1addr, 6);
@@ -296,7 +296,7 @@ ft_cpu_setup(void *blob, bd_t *bd)
 		memcpy(p, bd->bi_enet1addr, 6);
 #endif
 
-#if defined(CONFIG_MPC86XX_TSEC3)
+#if defined(CONFIG_TSEC3)
 	p = ft_get_prop(blob, "/" OF_SOC "/ethernet@26000/mac-address", &len);
 	if (p != NULL)
 		memcpy(p, bd->bi_enet2addr, 6);
@@ -305,7 +305,7 @@ ft_cpu_setup(void *blob, bd_t *bd)
 		memcpy(p, bd->bi_enet2addr, 6);
 #endif
 
-#if defined(CONFIG_MPC86XX_TSEC4)
+#if defined(CONFIG_TSEC4)
 	p = ft_get_prop(blob, "/" OF_SOC "/ethernet@27000/mac-address", &len);
 	if (p != NULL)
 		memcpy(p, bd->bi_enet3addr, 6);

cpu/mpc86xx/start.S

@@ -116,7 +116,7 @@ _start_of_vectors:
 /* Alignment exception. */
 	. = 0x600
 Alignment:
-	EXCEPTION_PROLOG
+	EXCEPTION_PROLOG(SRR0, SRR1)
 	mfspr	r4,DAR
 	stw	r4,_DAR(r21)
 	mfspr	r5,DSISR
@@ -134,7 +134,7 @@ Alignment:
 /* Program check exception */
 	. = 0x700
 ProgramCheck:
-	EXCEPTION_PROLOG
+	EXCEPTION_PROLOG(SRR0, SRR1)
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	li	r20,MSR_KERNEL
 	rlwimi	r20,r23,0,16,16		/* copy EE bit from saved MSR */

cpu/mpc8xx/start.S

@@ -224,7 +224,7 @@ _start_of_vectors:
 /* Alignment exception. */
 	. = 0x600
 Alignment:
-	EXCEPTION_PROLOG
+	EXCEPTION_PROLOG(SRR0, SRR1)
 	mfspr	r4,DAR
 	stw	r4,_DAR(r21)
 	mfspr	r5,DSISR
@@ -242,7 +242,7 @@ Alignment:
 /* Program check exception */
 	. = 0x700
 ProgramCheck:
-	EXCEPTION_PROLOG
+	EXCEPTION_PROLOG(SRR0, SRR1)
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	li	r20,MSR_KERNEL
 	rlwimi	r20,r23,0,16,16		/* copy EE bit from saved MSR */

cpu/ppc4xx/405gp_pci.c

@@ -77,11 +77,21 @@
 #include <asm/processor.h>
 #include <pci.h>
 
+#ifdef CONFIG_PCI
+
 DECLARE_GLOBAL_DATA_PTR;
 
-#if defined(CONFIG_405GP) || defined(CONFIG_405EP)
+/*
+ * Board-specific pci initialization
+ * Platform code can reimplement pci_pre_init() if needed
+ */
+int __pci_pre_init(struct pci_controller *hose)
+{
+	return 1;
+}
+int pci_pre_init(struct pci_controller *hose) __attribute__((weak, alias("__pci_pre_init")));
 
-#ifdef CONFIG_PCI
+#if defined(CONFIG_405GP) || defined(CONFIG_405EP)
 
 #if defined(CONFIG_PMC405)
 ushort pmc405_pci_subsys_deviceid(void);
@@ -191,6 +201,13 @@ void pci_405gp_init(struct pci_controller *hose)
 	if (hose->pci_fb)
 		pciauto_region_init(hose->pci_fb);
 
+	/* Let board change/modify hose & do initial checks */
+	if (pci_pre_init (hose) == 0) {
+		printf("PCI: Board-specific initialization failed.\n");
+		printf("PCI: Configuration aborted.\n");
+		return;
+	}
+
 	pci_register_hose(hose);
 
 	/*--------------------------------------------------------------------------+
@@ -416,14 +433,12 @@ void pci_init_board(void)
 
 #endif
 
-#endif /* CONFIG_PCI */
-
 #endif /* CONFIG_405GP */
 
 /*-----------------------------------------------------------------------------+
  * CONFIG_440
  *-----------------------------------------------------------------------------*/
-#if defined(CONFIG_440) && defined(CONFIG_PCI)
+#if defined(CONFIG_440)
 
 static struct pci_controller ppc440_hose = {0};
 
@@ -496,14 +511,12 @@ void pci_440_init (struct pci_controller *hose)
 
 	pci_setup_indirect(hose, PCIX0_CFGADR, PCIX0_CFGDATA);
 
-#if defined(CFG_PCI_PRE_INIT)
 	/* Let board change/modify hose & do initial checks */
 	if (pci_pre_init (hose) == 0) {
 		printf("PCI: Board-specific initialization failed.\n");
 		printf("PCI: Configuration aborted.\n");
 		return;
 	}
-#endif
 
 	pci_register_hose( hose );
 
@@ -575,4 +588,5 @@ void pci_init_board(void)
 #endif
 }
 
-#endif /* CONFIG_440 & CONFIG_PCI */
+#endif /* CONFIG_440 */
+#endif /* CONFIG_PCI */

cpu/ppc4xx/44x_spd_ddr.c

@@ -70,6 +70,15 @@
 
 #define ONE_BILLION	1000000000
 
+/*
+ * Board-specific Platform code can reimplement spd_ddr_init_hang () if needed
+ */
+void __spd_ddr_init_hang (void)
+{
+	hang ();
+}
+void spd_ddr_init_hang (void) __attribute__((weak, alias("__spd_ddr_init_hang")));
+
 /*-----------------------------------------------------------------------------
   |  Memory Controller Options 0
   +-----------------------------------------------------------------------------*/
@@ -262,7 +271,7 @@ typedef struct bank_param BANKPARMS;
 #ifdef CFG_SIMULATE_SPD_EEPROM
 extern unsigned char cfg_simulate_spd_eeprom[128];
 #endif
-void program_tlb(u32 start, u32 size, u32 tlb_word2_i_value);
+void program_tlb(u32 phys_addr, u32 virt_addr, u32 size, u32 tlb_word2_i_value);
 
 static unsigned char spd_read(uchar chip, uint addr);
 static void get_spd_info(unsigned long *dimm_populated,
@@ -373,7 +382,7 @@ long int spd_sdram(void) {
 
 #ifdef CONFIG_PROG_SDRAM_TLB /* this define should eventually be removed */
 	/* and program tlb entries for this size (dynamic) */
-	program_tlb(0, total_size, MY_TLB_WORD2_I_ENABLE);
+	program_tlb(0, 0, total_size, MY_TLB_WORD2_I_ENABLE);
 #endif
 
 	/*
@@ -467,7 +476,7 @@ static void get_spd_info(unsigned long *dimm_populated,
 
 	if (dimm_found == FALSE) {
 		printf("ERROR - No memory installed. Install a DDR-SDRAM DIMM.\n\n");
-		hang();
+		spd_ddr_init_hang ();
 	}
 }
 
@@ -490,7 +499,7 @@ static void check_mem_type(unsigned long *dimm_populated,
 				       dimm_num);
 				printf("Only DDR SDRAM DIMMs are supported.\n");
 				printf("Replace the DIMM module with a supported DIMM.\n\n");
-				hang();
+				spd_ddr_init_hang ();
 				break;
 			}
 		}
@@ -510,7 +519,7 @@ static void check_volt_type(unsigned long *dimm_populated,
 			if (voltage_type != 0x04) {
 				printf("ERROR: DIMM %lu with unsupported voltage level.\n",
 				       dimm_num);
-				hang();
+				spd_ddr_init_hang ();
 			} else {
 				debug("DIMM %lu voltage level supported.\n", dimm_num);
 			}
@@ -581,7 +590,7 @@ static void program_cfg0(unsigned long *dimm_populated,
 				printf("WARNING: DIMM with datawidth of %lu bits.\n",
 				       data_width);
 				printf("Only DIMMs with 32 or 64 bit datawidths supported.\n");
-				hang();
+				spd_ddr_init_hang ();
 			}
 			break;
 		}
@@ -769,7 +778,7 @@ static void program_tr0(unsigned long *dimm_populated,
 				if ((tcyc_reg & 0x0F) >= 10) {
 					printf("ERROR: Tcyc incorrect for DIMM in slot %lu\n",
 					       dimm_num);
-					hang();
+					spd_ddr_init_hang ();
 				}
 
 				cycle_time_ns_x_10[cas_index] =
@@ -849,7 +858,7 @@ static void program_tr0(unsigned long *dimm_populated,
 		printf("ERROR: No supported CAS latency with the installed DIMMs.\n");
 		printf("Only CAS latencies of 2.0, 2.5, and 3.0 are supported.\n");
 		printf("Make sure the PLB speed is within the supported range.\n");
-		hang();
+		spd_ddr_init_hang ();
 	}
 
 	/*
@@ -1008,6 +1017,7 @@ static int short_mem_test(void)
 			 */
 			for (i = 0; i < NUMMEMTESTS; i++) {
 				for (j = 0; j < NUMMEMWORDS; j++) {
+//printf("bank enabled base:%x\n", &membase[j]);
 					membase[j] = test[i][j];
 					ppcDcbf((unsigned long)&(membase[j]));
 				}
@@ -1160,7 +1170,7 @@ static void program_tr1(void)
 	 */
 	if (window_found == FALSE) {
 		printf("ERROR: Cannot determine a common read delay.\n");
-		hang();
+		spd_ddr_init_hang ();
 	}
 
 	/*
@@ -1310,7 +1320,7 @@ static unsigned long program_bxcr(unsigned long *dimm_populated,
 				printf("ERROR: Unsupported value for the banksize: %d.\n",
 				       bank_size_id);
 				printf("Replace the DIMM module with a supported DIMM.\n\n");
-				hang();
+				spd_ddr_init_hang ();
 			}
 
 			switch (num_col_addr) {
@@ -1332,7 +1342,7 @@ static unsigned long program_bxcr(unsigned long *dimm_populated,
 				printf("ERROR: Unsupported value for number of "
 				       "column addresses: %d.\n", num_col_addr);
 				printf("Replace the DIMM module with a supported DIMM.\n\n");
-				hang();
+				spd_ddr_init_hang ();
 			}
 
 			/*
@@ -1340,14 +1350,14 @@ static unsigned long program_bxcr(unsigned long *dimm_populated,
 			 */
 			cr |= SDRAM_BXCR_SDBE;
 
- 			for (i = 0; i < num_banks; i++) {
+			for (i = 0; i < num_banks; i++) {
 				bank_parms[ctrl_bank_num[dimm_num]+i].bank_size_bytes =
 					(4 << 20) * bank_size_id;
 				bank_parms[ctrl_bank_num[dimm_num]+i].cr = cr;
 				debug("DIMM%d-bank %d (SDRAM0_B%dCR): bank_size_bytes=%d\n",
 				      dimm_num, i, ctrl_bank_num[dimm_num]+i,
 				      bank_parms[ctrl_bank_num[dimm_num]+i].bank_size_bytes);
- 			}
+			}
 		}
 	}
 

cpu/ppc4xx/44x_spd_ddr2.c

@@ -58,8 +58,8 @@
 #define SDRAM_DDR2	2
 #define SDRAM_NONE	0
 
-#define MAXDIMMS 	2
-#define MAXRANKS 	4
+#define MAXDIMMS	2
+#define MAXRANKS	4
 #define MAXBXCF		4
 #define MAX_SPD_BYTES	256   /* Max number of bytes on the DIMM's SPD EEPROM */
 
@@ -129,6 +129,16 @@
 #define MY_TLB_WORD2_I_ENABLE	TLB_WORD2_I_ENABLE	/* disable caching on SDRAM */
 #endif
 
+/*
+ * Board-specific Platform code can reimplement spd_ddr_init_hang () if needed
+ */
+void __spd_ddr_init_hang (void)
+{
+	hang ();
+}
+void spd_ddr_init_hang (void) __attribute__((weak, alias("__spd_ddr_init_hang")));
+
+
 /* Private Structure Definitions */
 
 /* enum only to ease code for cas latency setting */
@@ -144,7 +154,7 @@ typedef enum ddr_cas_id {
  * Prototypes
  *-----------------------------------------------------------------------------*/
 static unsigned long sdram_memsize(void);
-void program_tlb(u32 start, u32 size, u32 tlb_word2_i_value);
+void program_tlb(u32 phys_addr, u32 virt_addr, u32 size, u32 tlb_word2_i_value);
 static void get_spd_info(unsigned long *dimm_populated,
 			 unsigned char *iic0_dimm_addr,
 			 unsigned long num_dimm_banks);
@@ -528,7 +538,7 @@ long int initdram(int board_type)
 	dram_size = sdram_memsize();
 
 	/* and program tlb entries for this size (dynamic) */
-	program_tlb(0, dram_size, MY_TLB_WORD2_I_ENABLE);
+	program_tlb(0, 0, dram_size, MY_TLB_WORD2_I_ENABLE);
 
 	/*------------------------------------------------------------------
 	 * DQS calibration.
@@ -582,7 +592,7 @@ static void get_spd_info(unsigned long *dimm_populated,
 
 	if (dimm_found == FALSE) {
 		printf("ERROR - No memory installed. Install a DDR-SDRAM DIMM.\n\n");
-		hang();
+		spd_ddr_init_hang ();
 	}
 }
 
@@ -629,42 +639,42 @@ static void check_mem_type(unsigned long *dimm_populated,
 				       "slot %d.\n", (unsigned int)dimm_num);
 				printf("Only DDR and DDR2 SDRAM DIMMs are supported.\n");
 				printf("Replace the DIMM module with a supported DIMM.\n\n");
-				hang();
+				spd_ddr_init_hang ();
 				break;
 			case 2:
 				printf("ERROR: EDO DIMM detected in slot %d.\n",
 				       (unsigned int)dimm_num);
 				printf("Only DDR and DDR2 SDRAM DIMMs are supported.\n");
 				printf("Replace the DIMM module with a supported DIMM.\n\n");
-				hang();
+				spd_ddr_init_hang ();
 				break;
 			case 3:
 				printf("ERROR: Pipelined Nibble DIMM detected in slot %d.\n",
 				       (unsigned int)dimm_num);
 				printf("Only DDR and DDR2 SDRAM DIMMs are supported.\n");
 				printf("Replace the DIMM module with a supported DIMM.\n\n");
-				hang();
+				spd_ddr_init_hang ();
 				break;
 			case 4:
 				printf("ERROR: SDRAM DIMM detected in slot %d.\n",
 				       (unsigned int)dimm_num);
 				printf("Only DDR and DDR2 SDRAM DIMMs are supported.\n");
 				printf("Replace the DIMM module with a supported DIMM.\n\n");
-				hang();
+				spd_ddr_init_hang ();
 				break;
 			case 5:
 				printf("ERROR: Multiplexed ROM DIMM detected in slot %d.\n",
 				       (unsigned int)dimm_num);
 				printf("Only DDR and DDR2 SDRAM DIMMs are supported.\n");
 				printf("Replace the DIMM module with a supported DIMM.\n\n");
-				hang();
+				spd_ddr_init_hang ();
 				break;
 			case 6:
 				printf("ERROR: SGRAM DIMM detected in slot %d.\n",
 				       (unsigned int)dimm_num);
 				printf("Only DDR and DDR2 SDRAM DIMMs are supported.\n");
 				printf("Replace the DIMM module with a supported DIMM.\n\n");
-				hang();
+				spd_ddr_init_hang ();
 				break;
 			case 7:
 				debug("DIMM slot %d: DDR1 SDRAM detected\n", dimm_num);
@@ -679,7 +689,7 @@ static void check_mem_type(unsigned long *dimm_populated,
 				       (unsigned int)dimm_num);
 				printf("Only DDR1 and DDR2 SDRAM DIMMs are supported.\n");
 				printf("Replace the DIMM module with a supported DIMM.\n\n");
-				hang();
+				spd_ddr_init_hang ();
 				break;
 			}
 		}
@@ -689,7 +699,7 @@ static void check_mem_type(unsigned long *dimm_populated,
 		    && (dimm_populated[dimm_num]   != SDRAM_NONE)
 		    && (dimm_populated[dimm_num-1] != dimm_populated[dimm_num])) {
 			printf("ERROR: DIMM's DDR1 and DDR2 type can not be mixed.\n");
-			hang();
+			spd_ddr_init_hang ();
 		}
 	}
 }
@@ -764,7 +774,7 @@ static void check_frequency(unsigned long *dimm_populated,
 				       (unsigned int)(calc_cycle_time*10));
 				printf("Replace the DIMM, or change DDR frequency via "
 				       "strapping bits.\n\n");
-				hang();
+				spd_ddr_init_hang ();
 			}
 		}
 	}
@@ -796,7 +806,7 @@ static void check_rank_number(unsigned long *dimm_populated,
 				       "slot %d is not supported.\n", dimm_rank, dimm_num);
 				printf("Only %d ranks are supported for all DIMM.\n", MAXRANKS);
 				printf("Replace the DIMM module with a supported DIMM.\n\n");
-				hang();
+				spd_ddr_init_hang ();
 			} else
 				total_rank += dimm_rank;
 		}
@@ -805,7 +815,7 @@ static void check_rank_number(unsigned long *dimm_populated,
 			       "for all slots.\n", (unsigned int)total_rank);
 			printf("Only %d ranks are supported for all DIMM.\n", MAXRANKS);
 			printf("Remove one of the DIMM modules.\n\n");
-			hang();
+			spd_ddr_init_hang ();
 		}
 	}
 }
@@ -830,28 +840,28 @@ static void check_voltage_type(unsigned long *dimm_populated,
 				printf("This DIMM is 5.0 Volt/TTL.\n");
 				printf("Replace the DIMM module in slot %d with a supported DIMM.\n\n",
 				       (unsigned int)dimm_num);
-				hang();
+				spd_ddr_init_hang ();
 				break;
 			case 0x01:
 				printf("ERROR: Only DIMMs DDR 2.5V or DDR2 1.8V are supported.\n");
 				printf("This DIMM is LVTTL.\n");
 				printf("Replace the DIMM module in slot %d with a supported DIMM.\n\n",
 				       (unsigned int)dimm_num);
-				hang();
+				spd_ddr_init_hang ();
 				break;
 			case 0x02:
 				printf("ERROR: Only DIMMs DDR 2.5V or DDR2 1.8V are supported.\n");
 				printf("This DIMM is 1.5 Volt.\n");
 				printf("Replace the DIMM module in slot %d with a supported DIMM.\n\n",
 				       (unsigned int)dimm_num);
-				hang();
+				spd_ddr_init_hang ();
 				break;
 			case 0x03:
 				printf("ERROR: Only DIMMs DDR 2.5V or DDR2 1.8V are supported.\n");
 				printf("This DIMM is 3.3 Volt/TTL.\n");
 				printf("Replace the DIMM module in slot %d with a supported DIMM.\n\n",
 				       (unsigned int)dimm_num);
-				hang();
+				spd_ddr_init_hang ();
 				break;
 			case 0x04:
 				/* 2.5 Voltage only for DDR1 */
@@ -863,7 +873,7 @@ static void check_voltage_type(unsigned long *dimm_populated,
 				printf("ERROR: Only DIMMs DDR 2.5V or DDR2 1.8V are supported.\n");
 				printf("Replace the DIMM module in slot %d with a supported DIMM.\n\n",
 				       (unsigned int)dimm_num);
-				hang();
+				spd_ddr_init_hang ();
 				break;
 			}
 		}
@@ -1006,13 +1016,13 @@ static void program_copt1(unsigned long *dimm_populated,
 	if ((dimm_populated[0] != SDRAM_NONE) && (dimm_populated[1] != SDRAM_NONE)) {
 		if (buf0 != buf1) {
 			printf("ERROR: DIMM's buffered/unbuffered, registered, clocking don't match.\n");
-			hang();
+			spd_ddr_init_hang ();
 		}
 	}
 
 	if ((dimm_64bit == TRUE) && (dimm_32bit == TRUE)) {
 		printf("ERROR: Cannot mix 32 bit and 64 bit DDR-SDRAM DIMMs together.\n");
-		hang();
+		spd_ddr_init_hang ();
 	}
 	else if ((dimm_64bit == TRUE) && (dimm_32bit == FALSE)) {
 		mcopt1 |= SDRAM_MCOPT1_DMWD_64;
@@ -1020,7 +1030,7 @@ static void program_copt1(unsigned long *dimm_populated,
 		mcopt1 |= SDRAM_MCOPT1_DMWD_32;
 	} else {
 		printf("ERROR: Please install only 32 or 64 bit DDR-SDRAM DIMMs.\n\n");
-		hang();
+		spd_ddr_init_hang ();
 	}
 
 	if (ecc_enabled == TRUE)
@@ -1209,7 +1219,7 @@ static void program_initplr(unsigned long *dimm_populated,
 			break;
 		default:
 			printf("ERROR: ucode error on selected_cas value %d", selected_cas);
-			hang();
+			spd_ddr_init_hang ();
 			break;
 		}
 
@@ -1241,7 +1251,7 @@ static void program_initplr(unsigned long *dimm_populated,
 			break;
 		default:
 			printf("ERROR: write recovery not support (%d)", write_recovery);
-			hang();
+			spd_ddr_init_hang ();
 			break;
 		}
 #else
@@ -1259,7 +1269,7 @@ static void program_initplr(unsigned long *dimm_populated,
 			ods = ODS_REDUCED;
 		} else {
 			printf("ERROR: Unsupported number of DIMM's (%d)", total_dimm);
-			hang();
+			spd_ddr_init_hang ();
 		}
 
 		mr = CMD_EMR | SELECT_MR | BURST_LEN_4 | wr | cas;
@@ -1284,7 +1294,7 @@ static void program_initplr(unsigned long *dimm_populated,
 		mtsdram(SDRAM_INITPLR13, 0x80800000 | emr);		/* EMR OCD Exit */
 	} else {
 		printf("ERROR: ucode error as unknown DDR type in program_initplr");
-		hang();
+		spd_ddr_init_hang ();
 	}
 }
 
@@ -1389,7 +1399,7 @@ static void program_mode(unsigned long *dimm_populated,
 					} else {
 						printf("ERROR: SPD reported Tcyc is incorrect for DIMM "
 						       "in slot %d\n", (unsigned int)dimm_num);
-						hang();
+						spd_ddr_init_hang ();
 					}
 				} else {
 					/* Convert from hex to decimal */
@@ -1526,7 +1536,7 @@ static void program_mode(unsigned long *dimm_populated,
 			printf("ERROR: Cannot find a supported CAS latency with the installed DIMMs.\n");
 			printf("Only DIMMs DDR1 with CAS latencies of 2.0, 2.5, and 3.0 are supported.\n");
 			printf("Make sure the PLB speed is within the supported range of the DIMMs.\n\n");
-			hang();
+			spd_ddr_init_hang ();
 		}
 	} else { /* DDR2 */
 		debug("cas_3_0_available=%d\n", cas_3_0_available);
@@ -1549,7 +1559,7 @@ static void program_mode(unsigned long *dimm_populated,
 			       cas_3_0_available, cas_4_0_available, cas_5_0_available);
 			printf("sdram_freq=%d cycle3=%d cycle4=%d cycle5=%d\n\n",
 			       sdram_freq, cycle_3_0_clk, cycle_4_0_clk, cycle_5_0_clk);
-			hang();
+			spd_ddr_init_hang ();
 		}
 	}
 
@@ -1658,7 +1668,7 @@ static void program_rtr(unsigned long *dimm_populated,
 				printf("ERROR: DIMM %d unsupported refresh rate/type.\n",
 				       (unsigned int)dimm_num);
 				printf("Replace the DIMM module with a supported DIMM.\n\n");
-				hang();
+				spd_ddr_init_hang ();
 				break;
 			}
 
@@ -2066,7 +2076,7 @@ static void program_bxcf(unsigned long *dimm_populated,
 					printf("ERROR: Unsupported value for number of "
 					       "column addresses: %d.\n", (unsigned int)num_col_addr);
 					printf("Replace the DIMM module with a supported DIMM.\n\n");
-					hang();
+					spd_ddr_init_hang ();
 				}
 			}
 
@@ -2148,7 +2158,7 @@ static void program_memory_queue(unsigned long *dimm_populated,
 				printf("ERROR: Unsupported value for the banksize: %d.\n",
 				       (unsigned int)rank_size_id);
 				printf("Replace the DIMM module with a supported DIMM.\n\n");
-				hang();
+				spd_ddr_init_hang ();
 			}
 
 			if ((dimm_populated[dimm_num] != SDRAM_NONE) && (dimm_num == 1))
@@ -2693,7 +2703,7 @@ calibration_loop:
 		printf("\nERROR: Cannot determine a common read delay for the "
 		       "DIMM(s) installed.\n");
 		debug("%s[%d] ERROR : \n", __FUNCTION__,__LINE__);
-		hang();
+		spd_ddr_init_hang ();
 	}
 
 	blank_string(strlen(str));
@@ -2849,7 +2859,7 @@ static void test(void)
 	if (window_found == FALSE) {
 		printf("ERROR: Cannot determine a common read delay for the "
 		       "DIMM(s) installed.\n");
-		hang();
+		spd_ddr_init_hang ();
 	}
 
 	/*------------------------------------------------------------------

cpu/ppc4xx/config.mk

@@ -22,5 +22,13 @@
 #
 
 PLATFORM_RELFLAGS += -fPIC -ffixed-r14 -meabi -fno-strict-aliasing
+PLATFORM_CPPFLAGS += -DCONFIG_4xx -ffixed-r2 -ffixed-r29 -mstring -msoft-float
 
-PLATFORM_CPPFLAGS += -DCONFIG_4xx -ffixed-r2 -ffixed-r29 -mstring -Wa,-m405 -mcpu=405 -msoft-float
+cfg=$(shell grep configs $(OBJTREE)/include/config.h | sed 's/.*<\(configs.*\)>/\1/')
+is440=$(shell grep CONFIG_440 $(TOPDIR)/include/$(cfg))
+
+ifneq (,$(findstring CONFIG_440,$(is440)))
+PLATFORM_CPPFLAGS += -Wa,-m440 -mcpu=440
+else
+PLATFORM_CPPFLAGS += -Wa,-m405 -mcpu=405
+endif

cpu/ppc4xx/cpu_init.c

@@ -153,7 +153,7 @@ cpu_init_f (void)
 	 */
 	asm volatile("	bl	0f"		::: "lr");
 	asm volatile("0:	mflr	3"		::: "r3");
-	asm volatile("	addi 	4, 0, 14"	::: "r4");
+	asm volatile("	addi	4, 0, 14"	::: "r4");
 	asm volatile("	mtctr	4"		::: "ctr");
 	asm volatile("1:	icbt	0, 3");
 	asm volatile("	addi	3, 3, 32"	::: "r3");
@@ -211,6 +211,8 @@ cpu_init_f (void)
 	val = mfspr(tcr);
 #if defined(CONFIG_440EP) || defined(CONFIG_440GR)
 	val |= 0xb8000000;      /* generate system reset after 1.34 seconds */
+#elif defined(CONFIG_440EPX)
+	val |= 0xb0000000;      /* generate system reset after 1.34 seconds */
 #else
 	val |= 0xf0000000;      /* generate system reset after 2.684 seconds */
 #endif

cpu/ppc4xx/gpio.c

@@ -103,6 +103,18 @@ void gpio_write_bit(int pin, int val)
 		out32(GPIO0_OR + offs, in32(GPIO0_OR + offs) & ~GPIO_VAL(pin));
 }
 
+int gpio_read_out_bit(int pin)
+{
+	u32 offs = 0;
+
+	if (pin >= GPIO_MAX) {
+		offs = 0x100;
+		pin -= GPIO_MAX;
+	}
+
+	return (in32(GPIO0_OR + offs) & GPIO_VAL(pin) ? 1 : 0);
+}
+
 #if defined(CFG_440_GPIO_TABLE)
 void gpio_set_chip_configuration(void)
 {
@@ -157,12 +169,38 @@ void gpio_set_chip_configuration(void)
 				switch (gpio_tab[gpio_core][i].alt_nb) {
 				case GPIO_SEL:
 					if (gpio_core == GPIO0) {
-						reg = in32(GPIO0_TCR) | (0x80000000 >> (j));
+						/*
+						 * Setup output value
+						 * 1 -> high level
+						 * 0 -> low level
+						 * else -> don't touch
+						 */
+						reg = in32(GPIO0_OR);
+						if (gpio_tab[gpio_core][i].out_val == GPIO_OUT_1)
+							reg |= (0x80000000 >> (i));
+						else if (gpio_tab[gpio_core][i].out_val == GPIO_OUT_0)
+							reg &= ~(0x80000000 >> (i));
+						out32(GPIO0_OR, reg);
+
+						reg = in32(GPIO0_TCR) | (0x80000000 >> (i));
 						out32(GPIO0_TCR, reg);
 					}
 
 					if (gpio_core == GPIO1) {
-						reg = in32(GPIO1_TCR) | (0x80000000 >> (j));
+						/*
+						 * Setup output value
+						 * 1 -> high level
+						 * 0 -> low level
+						 * else -> don't touch
+						 */
+						reg = in32(GPIO0_OR);
+						if (gpio_tab[gpio_core][i].out_val == GPIO_OUT_1)
+							reg |= (0x80000000 >> (i));
+						else if (gpio_tab[gpio_core][i].out_val == GPIO_OUT_0)
+							reg &= ~(0x80000000 >> (i));
+						out32(GPIO0_OR, reg);
+
+						reg = in32(GPIO1_TCR) | (0x80000000 >> (i));
 						out32(GPIO1_TCR, reg);
 					}
 

cpu/ppc4xx/start.S

@@ -22,26 +22,27 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  * MA 02111-1307 USA
  */
-/*------------------------------------------------------------------------------+ */
-/* */
-/*	 This source code has been made available to you by IBM on an AS-IS */
-/*	 basis.	 Anyone receiving this source is licensed under IBM */
-/*	 copyrights to use it in any way he or she deems fit, including */
-/*	 copying it, modifying it, compiling it, and redistributing it either */
-/*	 with or without modifications.	 No license under IBM patents or */
-/*	 patent applications is to be implied by the copyright license. */
-/* */
-/*	 Any user of this software should understand that IBM cannot provide */
-/*	 technical support for this software and will not be responsible for */
-/*	 any consequences resulting from the use of this software. */
-/* */
-/*	 Any person who transfers this source code or any derivative work */
-/*	 must include the IBM copyright notice, this paragraph, and the */
-/*	 preceding two paragraphs in the transferred software. */
-/* */
-/*	 COPYRIGHT   I B M   CORPORATION 1995 */
-/*	 LICENSED MATERIAL  -  PROGRAM PROPERTY OF I B M */
-/*------------------------------------------------------------------------------- */
+/*------------------------------------------------------------------------------+
+ *
+ *	 This source code has been made available to you by IBM on an AS-IS
+ *	 basis.	 Anyone receiving this source is licensed under IBM
+ *	 copyrights to use it in any way he or she deems fit, including
+ *	 copying it, modifying it, compiling it, and redistributing it either
+ *	 with or without modifications.	 No license under IBM patents or
+ *	 patent applications is to be implied by the copyright license.
+ *
+ *	 Any user of this software should understand that IBM cannot provide
+ *	 technical support for this software and will not be responsible for
+ *	 any consequences resulting from the use of this software.
+ *
+ *	 Any person who transfers this source code or any derivative work
+ *	 must include the IBM copyright notice, this paragraph, and the
+ *	 preceding two paragraphs in the transferred software.
+ *
+ *	 COPYRIGHT   I B M   CORPORATION 1995
+ *	 LICENSED MATERIAL  -  PROGRAM PROPERTY OF I B M
+ *-------------------------------------------------------------------------------
+ */
 
 /*  U-Boot - Startup Code for AMCC 4xx PowerPC based Embedded Boards
  *
@@ -59,7 +60,6 @@
  *  address and (s)dram will be positioned at address 0
  */
 #include <config.h>
-#include <mpc8xx.h>
 #include <ppc4xx.h>
 #include <version.h>
 
@@ -110,11 +110,11 @@
 # endif
 #endif /* CFG_INIT_DCACHE_CS */
 
-#define function_prolog(func_name)      .text; \
+#define function_prolog(func_name)	.text; \
 					.align 2; \
 					.globl func_name; \
 					func_name:
-#define function_epilog(func_name)      .type func_name,@function; \
+#define function_epilog(func_name)	.type func_name,@function; \
 					.size func_name,.-func_name
 
 /* We don't want the  MMU yet.
@@ -294,11 +294,13 @@ skip_debug_init:
 	mtspr	ivor7,r1	/* Floating point unavailable */
 	li	r1,0x0c00
 	mtspr	ivor8,r1	/* System call */
-	li	r1,0x1000
-	mtspr	ivor10,r1	/* Decrementer (PIT for 440) */
-	li	r1,0x1400
-	mtspr	ivor13,r1	/* Data TLB error */
+	li	r1,0x0a00
+	mtspr	ivor9,r1	/* Auxiliary Processor unavailable */
+	li	r1,0x0900
+	mtspr	ivor10,r1	/* Decrementer */
 	li	r1,0x1300
+	mtspr	ivor13,r1	/* Data TLB error */
+	li	r1,0x1400
 	mtspr	ivor14,r1	/* Instr TLB error */
 	li	r1,0x2000
 	mtspr	ivor15,r1	/* Debug */
@@ -503,11 +505,81 @@ version_string:
 	.ascii " (", __DATE__, " - ", __TIME__, ")"
 	.ascii CONFIG_IDENT_STRING, "\0"
 
-/*
- * Maybe this should be moved somewhere else because the current
- * location (0x100) is where the CriticalInput Execption should be.
- */
 	. = EXC_OFF_SYS_RESET
+	.globl	_start_of_vectors
+_start_of_vectors:
+
+/* Critical input. */
+	CRIT_EXCEPTION(0x100, CritcalInput, UnknownException)
+
+#ifdef CONFIG_440
+/* Machine check */
+	MCK_EXCEPTION(0x200, MachineCheck, MachineCheckException)
+#else
+	CRIT_EXCEPTION(0x200, MachineCheck, MachineCheckException)
+#endif /* CONFIG_440 */
+
+/* Data Storage exception. */
+	STD_EXCEPTION(0x300, DataStorage, UnknownException)
+
+/* Instruction Storage exception. */
+	STD_EXCEPTION(0x400, InstStorage, UnknownException)
+
+/* External Interrupt exception. */
+	STD_EXCEPTION(0x500, ExtInterrupt, external_interrupt)
+
+/* Alignment exception. */
+	. = 0x600
+Alignment:
+	EXCEPTION_PROLOG(SRR0, SRR1)
+	mfspr	r4,DAR
+	stw	r4,_DAR(r21)
+	mfspr	r5,DSISR
+	stw	r5,_DSISR(r21)
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	li	r20,MSR_KERNEL
+	rlwimi	r20,r23,0,16,16		/* copy EE bit from saved MSR */
+	lwz	r6,GOT(transfer_to_handler)
+	mtlr	r6
+	blrl
+.L_Alignment:
+	.long	AlignmentException - _start + _START_OFFSET
+	.long	int_return - _start + _START_OFFSET
+
+/* Program check exception */
+	. = 0x700
+ProgramCheck:
+	EXCEPTION_PROLOG(SRR0, SRR1)
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	li	r20,MSR_KERNEL
+	rlwimi	r20,r23,0,16,16		/* copy EE bit from saved MSR */
+	lwz	r6,GOT(transfer_to_handler)
+	mtlr	r6
+	blrl
+.L_ProgramCheck:
+	.long	ProgramCheckException - _start + _START_OFFSET
+	.long	int_return - _start + _START_OFFSET
+
+#ifdef CONFIG_440
+	STD_EXCEPTION(0x800, FPUnavailable, UnknownException)
+	STD_EXCEPTION(0x900, Decrementer, DecrementerPITException)
+	STD_EXCEPTION(0xa00, APU, UnknownException)
+#endif
+	STD_EXCEPTION(0xc00, SystemCall, UnknownException)
+
+#ifdef CONFIG_440
+	STD_EXCEPTION(0x1300, DataTLBError, UnknownException)
+	STD_EXCEPTION(0x1400, InstructionTLBError, UnknownException)
+#else
+	STD_EXCEPTION(0x1000, PIT, DecrementerPITException)
+	STD_EXCEPTION(0x1100, InstructionTLBMiss, UnknownException)
+	STD_EXCEPTION(0x1200, DataTLBMiss, UnknownException)
+#endif
+	CRIT_EXCEPTION(0x2000, DebugBreakpoint, DebugException )
+
+	.globl	_end_of_vectors
+_end_of_vectors:
+	. = _START_OFFSET
 #endif
 	.globl	_start
 _start:
@@ -817,21 +889,21 @@ _start:
 	 */
 	lis	r3,CFG_OCM_DATA_ADDR@h	/* OCM location */
 	ori	r3,r3,CFG_OCM_DATA_ADDR@l
-	ori	r3,r3,0x8270	/* 32K Offset, 16K for Bank 1, R/W/Enable */
+	ori	r3,r3,0x0270		/* 16K for Bank 1, R/W/Enable */
 	mtdcr	ocmplb3cr1,r3		/* Set PLB Access */
 	ori	r3,r3,0x4000		/* Add 0x4000 for bank 2 */
 	mtdcr	ocmplb3cr2,r3		/* Set PLB Access */
 	isync
 
-	lis	r3,CFG_OCM_DATA_ADDR@h  /* OCM location */
+	lis	r3,CFG_OCM_DATA_ADDR@h	/* OCM location */
 	ori	r3,r3,CFG_OCM_DATA_ADDR@l
-	ori	r3,r3,0x0270            /* 16K for Bank 1, R/W/Enable */
-	mtdcr	ocmdscr1, r3            /* Set Data Side */
-	mtdcr	ocmiscr1, r3            /* Set Instruction Side */
+	ori	r3,r3,0x0270		/* 16K for Bank 1, R/W/Enable */
+	mtdcr	ocmdscr1, r3		/* Set Data Side */
+	mtdcr	ocmiscr1, r3		/* Set Instruction Side */
 	ori	r3,r3,0x4000		/* Add 0x4000 for bank 2 */
-	mtdcr	ocmdscr2, r3            /* Set Data Side */
-	mtdcr	ocmiscr2, r3            /* Set Instruction Side */
-	addis	r3,0,0x0800             /* OCM Data Parity Disable - 1 Wait State */
+	mtdcr	ocmdscr2, r3		/* Set Data Side */
+	mtdcr	ocmiscr2, r3		/* Set Instruction Side */
+	addis	r3,0,0x0800		/* OCM Data Parity Disable - 1 Wait State */
 	mtdcr	ocmdsisdpc,r3
 
 	isync
@@ -850,7 +922,7 @@ _start:
 	mtdcr	ocmdscntl, r4		/* set data-side IRAM config */
 	isync
 
-	lis	r3,CFG_OCM_DATA_ADDR@h  /* OCM location */
+	lis	r3,CFG_OCM_DATA_ADDR@h	/* OCM location */
 	ori	r3,r3,CFG_OCM_DATA_ADDR@l
 	mtdcr	ocmdsarc, r3
 	addis	r4, 0, 0xC000		/* OCM data area enabled */
@@ -1017,107 +1089,6 @@ start_ram:
 
 
 #ifndef CONFIG_NAND_SPL
-/*****************************************************************************/
-	.globl	_start_of_vectors
-_start_of_vectors:
-
-#if 0
-/*TODO Fixup _start above so we can do this*/
-/* Critical input. */
-	CRIT_EXCEPTION(0x100, CritcalInput, CritcalInputException)
-#endif
-
-/* Machine check */
-	CRIT_EXCEPTION(0x200, MachineCheck, MachineCheckException)
-
-/* Data Storage exception. */
-	STD_EXCEPTION(0x300, DataStorage, UnknownException)
-
-/* Instruction Storage exception. */
-	STD_EXCEPTION(0x400, InstStorage, UnknownException)
-
-/* External Interrupt exception. */
-	STD_EXCEPTION(0x500, ExtInterrupt, external_interrupt)
-
-/* Alignment exception. */
-	. = 0x600
-Alignment:
-	EXCEPTION_PROLOG
-	mfspr	r4,DAR
-	stw	r4,_DAR(r21)
-	mfspr	r5,DSISR
-	stw	r5,_DSISR(r21)
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	li	r20,MSR_KERNEL
-	rlwimi	r20,r23,0,16,16		/* copy EE bit from saved MSR */
-	lwz	r6,GOT(transfer_to_handler)
-	mtlr	r6
-	blrl
-.L_Alignment:
-	.long	AlignmentException - _start + EXC_OFF_SYS_RESET
-	.long	int_return - _start + EXC_OFF_SYS_RESET
-
-/* Program check exception */
-	. = 0x700
-ProgramCheck:
-	EXCEPTION_PROLOG
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	li	r20,MSR_KERNEL
-	rlwimi	r20,r23,0,16,16		/* copy EE bit from saved MSR */
-	lwz	r6,GOT(transfer_to_handler)
-	mtlr	r6
-	blrl
-.L_ProgramCheck:
-	.long	ProgramCheckException - _start + EXC_OFF_SYS_RESET
-	.long	int_return - _start + EXC_OFF_SYS_RESET
-
-	/* No FPU on MPC8xx.  This exception is not supposed to happen.
-	*/
-	STD_EXCEPTION(0x800, FPUnavailable, UnknownException)
-
-	/* I guess we could implement decrementer, and may have
-	 * to someday for timekeeping.
-	 */
-	STD_EXCEPTION(0x900, Decrementer, timer_interrupt)
-	STD_EXCEPTION(0xa00, Trap_0a, UnknownException)
-	STD_EXCEPTION(0xb00, Trap_0b, UnknownException)
-	STD_EXCEPTION(0xc00, SystemCall, UnknownException)
-	STD_EXCEPTION(0xd00, SingleStep, UnknownException)
-
-	STD_EXCEPTION(0xe00, Trap_0e, UnknownException)
-	STD_EXCEPTION(0xf00, Trap_0f, UnknownException)
-
-	/* On the MPC8xx, this is a software emulation interrupt.  It occurs
-	 * for all unimplemented and illegal instructions.
-	 */
-	STD_EXCEPTION(0x1000, PIT, PITException)
-
-	STD_EXCEPTION(0x1100, InstructionTLBMiss, UnknownException)
-	STD_EXCEPTION(0x1200, DataTLBMiss, UnknownException)
-	STD_EXCEPTION(0x1300, InstructionTLBError, UnknownException)
-	STD_EXCEPTION(0x1400, DataTLBError, UnknownException)
-
-	STD_EXCEPTION(0x1500, Reserved5, UnknownException)
-	STD_EXCEPTION(0x1600, Reserved6, UnknownException)
-	STD_EXCEPTION(0x1700, Reserved7, UnknownException)
-	STD_EXCEPTION(0x1800, Reserved8, UnknownException)
-	STD_EXCEPTION(0x1900, Reserved9, UnknownException)
-	STD_EXCEPTION(0x1a00, ReservedA, UnknownException)
-	STD_EXCEPTION(0x1b00, ReservedB, UnknownException)
-
-	STD_EXCEPTION(0x1c00, DataBreakpoint, UnknownException)
-	STD_EXCEPTION(0x1d00, InstructionBreakpoint, UnknownException)
-	STD_EXCEPTION(0x1e00, PeripheralBreakpoint, UnknownException)
-	STD_EXCEPTION(0x1f00, DevPortBreakpoint, UnknownException)
-
-	CRIT_EXCEPTION(0x2000, DebugBreakpoint, DebugException )
-
-	.globl	_end_of_vectors
-_end_of_vectors:
-
-
-	. = 0x2100
-
 /*
  * This code finishes saving the registers to the exception frame
  * and jumps to the appropriate handler for the exception.
@@ -1133,28 +1104,12 @@ transfer_to_handler:
 	SAVE_4GPRS(8, r21)
 	SAVE_8GPRS(12, r21)
 	SAVE_8GPRS(24, r21)
-#if 0
-	andi.	r23,r23,MSR_PR
-	mfspr	r23,SPRG3		/* if from user, fix up tss.regs */
-	beq	2f
-	addi	r24,r1,STACK_FRAME_OVERHEAD
-	stw	r24,PT_REGS(r23)
-2:	addi	r2,r23,-TSS		/* set r2 to current */
-	tovirt(r2,r2,r23)
-#endif
 	mflr	r23
 	andi.	r24,r23,0x3f00		/* get vector offset */
 	stw	r24,TRAP(r21)
 	li	r22,0
 	stw	r22,RESULT(r21)
 	mtspr	SPRG2,r22		/* r1 is now kernel sp */
-#if 0
-	addi	r24,r2,TASK_STRUCT_SIZE /* check for kernel stack overflow */
-	cmplw	0,r1,r2
-	cmplw	1,r1,r24
-	crand	1,1,4
-	bgt	stack_ovf		/* if r2 < r1 < r2+TASK_STRUCT_SIZE */
-#endif
 	lwz	r24,0(r23)		/* virtual address of handler */
 	lwz	r23,4(r23)		/* where to go when done */
 	mtspr	SRR0,r24
@@ -1215,16 +1170,72 @@ crit_return:
 	REST_GPR(31, r1)
 	lwz	r2,_NIP(r1)	/* Restore environment */
 	lwz	r0,_MSR(r1)
-	mtspr	990,r2		/* SRR2 */
-	mtspr	991,r0		/* SRR3 */
+	mtspr	csrr0,r2
+	mtspr	csrr1,r0
 	lwz	r0,GPR0(r1)
 	lwz	r2,GPR2(r1)
 	lwz	r1,GPR1(r1)
 	SYNC
 	rfci
 
-/* Cache functions.
-*/
+#ifdef CONFIG_440
+mck_return:
+	mfmsr	r28		/* Disable interrupts */
+	li	r4,0
+	ori	r4,r4,MSR_EE
+	andc	r28,r28,r4
+	SYNC			/* Some chip revs need this... */
+	mtmsr	r28
+	SYNC
+	lwz	r2,_CTR(r1)
+	lwz	r0,_LINK(r1)
+	mtctr	r2
+	mtlr	r0
+	lwz	r2,_XER(r1)
+	lwz	r0,_CCR(r1)
+	mtspr	XER,r2
+	mtcrf	0xFF,r0
+	REST_10GPRS(3, r1)
+	REST_10GPRS(13, r1)
+	REST_8GPRS(23, r1)
+	REST_GPR(31, r1)
+	lwz	r2,_NIP(r1)	/* Restore environment */
+	lwz	r0,_MSR(r1)
+	mtspr	mcsrr0,r2
+	mtspr	mcsrr1,r0
+	lwz	r0,GPR0(r1)
+	lwz	r2,GPR2(r1)
+	lwz	r1,GPR1(r1)
+	SYNC
+	rfmci
+#endif /* CONFIG_440 */
+
+
+/*
+ * Cache functions.
+ *
+ * NOTE: currently the 440s run with dcache _disabled_ once relocated to DRAM,
+ * although for some cache-ralated calls stubs have to be provided to satisfy
+ * symbols resolution.
+ * Icache-related functions are used in POST framework.
+ *
+ */
+#ifdef CONFIG_440
+       .globl  dcache_disable
+       .globl  icache_disable
+       .globl  icache_enable
+dcache_disable:
+icache_disable:
+icache_enable:
+	blr
+
+	.globl	dcache_status
+	.globl	icache_status
+dcache_status:
+icache_status:
+	mr	r3,  0
+	blr
+#else
 flush_dcache:
 	addis	r9,r0,0x0002		/* set mask for EE and CE msr bits */
 	ori	r9,r9,0x8000
@@ -1303,24 +1314,13 @@ dcache_status:
 	mfdccr	r3
 	srwi	r3, r3, 31	/* >>31 => select bit 0 */
 	blr
+#endif
 
 	.globl get_pvr
 get_pvr:
 	mfspr	r3, PVR
 	blr
 
-#if !defined(CONFIG_440)
-	.globl wr_pit
-wr_pit:
-	mtspr	pit, r3
-	blr
-#endif
-
-	.globl wr_tcr
-wr_tcr:
-	mtspr	tcr, r3
-	blr
-
 /*------------------------------------------------------------------------------- */
 /* Function:	 out16 */
 /* Description:	 Output 16 bits */
@@ -1518,7 +1518,7 @@ relocate_code:
  * initialization, now running from RAM.
  */
 
-	addi	r0, r10, in_ram - _start + EXC_OFF_SYS_RESET
+	addi	r0, r10, in_ram - _start + _START_OFFSET
 	mtlr	r0
 	blr				/* NEVER RETURNS! */
 
@@ -1588,7 +1588,7 @@ clear_bss:
 	 */
 	.globl	trap_init
 trap_init:
-	lwz	r7, GOT(_start)
+	lwz	r7, GOT(_start_of_vectors)
 	lwz	r8, GOT(_end_of_vectors)
 
 	li	r9, 0x100		/* reset vector always at 0x100 */
@@ -1608,35 +1608,48 @@ trap_init:
 	/*
 	 * relocate `hdlr' and `int_return' entries
 	 */
-	li	r7, .L_MachineCheck - _start + EXC_OFF_SYS_RESET
-	li	r8, Alignment - _start + EXC_OFF_SYS_RESET
+	li	r7, .L_MachineCheck - _start + _START_OFFSET
+	li	r8, Alignment - _start + _START_OFFSET
 2:
 	bl	trap_reloc
-	addi	r7, r7, 0x100		/* next exception vector	*/
+	addi	r7, r7, 0x100		/* next exception vector */
 	cmplw	0, r7, r8
 	blt	2b
 
-	li	r7, .L_Alignment - _start + EXC_OFF_SYS_RESET
+	li	r7, .L_Alignment - _start + _START_OFFSET
 	bl	trap_reloc
 
-	li	r7, .L_ProgramCheck - _start + EXC_OFF_SYS_RESET
+	li	r7, .L_ProgramCheck - _start + _START_OFFSET
 	bl	trap_reloc
 
-	li	r7, .L_FPUnavailable - _start + EXC_OFF_SYS_RESET
-	li	r8, SystemCall - _start + EXC_OFF_SYS_RESET
-3:
+#ifdef CONFIG_440
+	li	r7, .L_FPUnavailable - _start + _START_OFFSET
 	bl	trap_reloc
-	addi	r7, r7, 0x100		/* next exception vector	*/
-	cmplw	0, r7, r8
-	blt	3b
 
-	li	r7, .L_SingleStep - _start + EXC_OFF_SYS_RESET
-	li	r8, _end_of_vectors - _start + EXC_OFF_SYS_RESET
-4:
+	li	r7, .L_Decrementer - _start + _START_OFFSET
+	bl	trap_reloc
+
+	li	r7, .L_APU - _start + _START_OFFSET
+	bl	trap_reloc
+
+	li	r7, .L_InstructionTLBError - _start + _START_OFFSET
+	bl	trap_reloc
+
+	li	r7, .L_DataTLBError - _start + _START_OFFSET
+	bl	trap_reloc
+#else /* CONFIG_440 */
+	li	r7, .L_PIT - _start + _START_OFFSET
+	bl	trap_reloc
+
+	li	r7, .L_InstructionTLBMiss - _start + _START_OFFSET
+	bl	trap_reloc
+
+	li	r7, .L_DataTLBMiss - _start + _START_OFFSET
+	bl	trap_reloc
+#endif /* CONFIG_440 */
+
+	li	r7, .L_DebugBreakpoint - _start + _START_OFFSET
 	bl	trap_reloc
-	addi	r7, r7, 0x100		/* next exception vector	*/
-	cmplw	0, r7, r8
-	blt	4b
 
 #if !defined(CONFIG_440)
 	addi	r7,r0,0x1000		/* set ME bit (Machine Exceptions) */
@@ -1679,13 +1692,13 @@ trap_reloc:
 +----------------------------------------------------------------------------*/
 	function_prolog(dcbz_area)
 	rlwinm. r5,r4,0,27,31
-	rlwinm  r5,r4,27,5,31
-	beq     ..d_ra2
-	addi    r5,r5,0x0001
-..d_ra2:mtctr   r5
-..d_ag2:dcbz    r0,r3
-	addi    r3,r3,32
-	bdnz    ..d_ag2
+	rlwinm	r5,r4,27,5,31
+	beq	..d_ra2
+	addi	r5,r5,0x0001
+..d_ra2:mtctr	r5
+..d_ag2:dcbz	r0,r3
+	addi	r3,r3,32
+	bdnz	..d_ag2
 	sync
 	blr
 	function_epilog(dcbz_area)
@@ -1694,26 +1707,26 @@ trap_reloc:
 | dflush.  Assume 32K at vector address is cachable.
 +----------------------------------------------------------------------------*/
 	function_prolog(dflush)
-	mfmsr   r9
-	rlwinm  r8,r9,0,15,13
-	rlwinm  r8,r8,0,17,15
-	mtmsr   r8
-	addi    r3,r0,0x0000
-	mtspr   dvlim,r3
-	mfspr   r3,ivpr
-	addi    r4,r0,1024
-	mtctr   r4
+	mfmsr	r9
+	rlwinm	r8,r9,0,15,13
+	rlwinm	r8,r8,0,17,15
+	mtmsr	r8
+	addi	r3,r0,0x0000
+	mtspr	dvlim,r3
+	mfspr	r3,ivpr
+	addi	r4,r0,1024
+	mtctr	r4
 ..dflush_loop:
-	lwz     r6,0x0(r3)
-	addi    r3,r3,32
-	bdnz    ..dflush_loop
-	addi    r3,r3,-32
-	mtctr   r4
-..ag:   dcbf    r0,r3
-	addi    r3,r3,-32
-	bdnz    ..ag
+	lwz	r6,0x0(r3)
+	addi	r3,r3,32
+	bdnz	..dflush_loop
+	addi	r3,r3,-32
+	mtctr	r4
+..ag:	dcbf	r0,r3
+	addi	r3,r3,-32
+	bdnz	..ag
 	sync
-	mtmsr   r9
+	mtmsr	r9
 	blr
 	function_epilog(dflush)
 #endif /* CONFIG_440 */

cpu/ppc4xx/tlb.c

@@ -36,7 +36,8 @@ typedef struct region {
 	unsigned long tlb_word2_i_value;
 } region_t;
 
-static int add_tlb_entry(unsigned long base_addr,
+static int add_tlb_entry(unsigned long phys_addr,
+			 unsigned long virt_addr,
 			 unsigned long tlb_word0_size_value,
 			 unsigned long tlb_word2_i_value)
 {
@@ -55,9 +56,9 @@ static int add_tlb_entry(unsigned long base_addr,
 		return -1;
 
 	/* Second, create the TLB entry */
-	tlb_word0_value = TLB_WORD0_EPN_ENCODE(base_addr) | TLB_WORD0_V_ENABLE |
+	tlb_word0_value = TLB_WORD0_EPN_ENCODE(virt_addr) | TLB_WORD0_V_ENABLE |
 		TLB_WORD0_TS_0 | tlb_word0_size_value;
-	tlb_word1_value = TLB_WORD1_RPN_ENCODE(base_addr) | TLB_WORD1_ERPN_ENCODE(0);
+	tlb_word1_value = TLB_WORD1_RPN_ENCODE(phys_addr) | TLB_WORD1_ERPN_ENCODE(0);
 	tlb_word2_value = TLB_WORD2_U0_DISABLE | TLB_WORD2_U1_DISABLE |
 		TLB_WORD2_U2_DISABLE | TLB_WORD2_U3_DISABLE |
 		TLB_WORD2_W_DISABLE | tlb_word2_i_value |
@@ -81,7 +82,9 @@ static int add_tlb_entry(unsigned long base_addr,
 	return 0;
 }
 
-static void program_tlb_addr(unsigned long base_addr, unsigned long mem_size,
+static void program_tlb_addr(unsigned long phys_addr,
+			     unsigned long virt_addr,
+			     unsigned long mem_size,
 			     unsigned long tlb_word2_i_value)
 {
 	int rc;
@@ -91,70 +94,86 @@ static void program_tlb_addr(unsigned long base_addr, unsigned long mem_size,
 	while (mem_size != 0) {
 		rc = 0;
 		/* Add the TLB entries in to map the region. */
-		if (((base_addr & TLB_256MB_ALIGN_MASK) == base_addr) &&
+		if (((phys_addr & TLB_256MB_ALIGN_MASK) == phys_addr) &&
 		    (mem_size >= TLB_256MB_SIZE)) {
 			/* Add a 256MB TLB entry */
-			if ((rc = add_tlb_entry(base_addr, TLB_WORD0_SIZE_256MB, tlb_i)) == 0) {
+			if ((rc = add_tlb_entry(phys_addr, virt_addr,
+						TLB_WORD0_SIZE_256MB, tlb_i)) == 0) {
 				mem_size -= TLB_256MB_SIZE;
-				base_addr += TLB_256MB_SIZE;
+				phys_addr += TLB_256MB_SIZE;
+				virt_addr += TLB_256MB_SIZE;
 			}
-		} else if (((base_addr & TLB_16MB_ALIGN_MASK) == base_addr) &&
+		} else if (((phys_addr & TLB_16MB_ALIGN_MASK) == phys_addr) &&
 			   (mem_size >= TLB_16MB_SIZE)) {
 			/* Add a 16MB TLB entry */
-			if ((rc = add_tlb_entry(base_addr, TLB_WORD0_SIZE_16MB, tlb_i)) == 0) {
+			if ((rc = add_tlb_entry(phys_addr, virt_addr,
+						TLB_WORD0_SIZE_16MB, tlb_i)) == 0) {
 				mem_size -= TLB_16MB_SIZE;
-				base_addr += TLB_16MB_SIZE;
+				phys_addr += TLB_16MB_SIZE;
+				virt_addr += TLB_16MB_SIZE;
 			}
-		} else if (((base_addr & TLB_1MB_ALIGN_MASK) == base_addr) &&
+		} else if (((phys_addr & TLB_1MB_ALIGN_MASK) == phys_addr) &&
 			   (mem_size >= TLB_1MB_SIZE)) {
 			/* Add a 1MB TLB entry */
-			if ((rc = add_tlb_entry(base_addr, TLB_WORD0_SIZE_1MB, tlb_i)) == 0) {
+			if ((rc = add_tlb_entry(phys_addr, virt_addr,
+						TLB_WORD0_SIZE_1MB, tlb_i)) == 0) {
 				mem_size -= TLB_1MB_SIZE;
-				base_addr += TLB_1MB_SIZE;
+				phys_addr += TLB_1MB_SIZE;
+				virt_addr += TLB_1MB_SIZE;
 			}
-		} else if (((base_addr & TLB_256KB_ALIGN_MASK) == base_addr) &&
+		} else if (((phys_addr & TLB_256KB_ALIGN_MASK) == phys_addr) &&
 			   (mem_size >= TLB_256KB_SIZE)) {
 			/* Add a 256KB TLB entry */
-			if ((rc = add_tlb_entry(base_addr, TLB_WORD0_SIZE_256KB, tlb_i)) == 0) {
+			if ((rc = add_tlb_entry(phys_addr, virt_addr,
+						TLB_WORD0_SIZE_256KB, tlb_i)) == 0) {
 				mem_size -= TLB_256KB_SIZE;
-				base_addr += TLB_256KB_SIZE;
+				phys_addr += TLB_256KB_SIZE;
+				virt_addr += TLB_256KB_SIZE;
 			}
-		} else if (((base_addr & TLB_64KB_ALIGN_MASK) == base_addr) &&
+		} else if (((phys_addr & TLB_64KB_ALIGN_MASK) == phys_addr) &&
 			   (mem_size >= TLB_64KB_SIZE)) {
 			/* Add a 64KB TLB entry */
-			if ((rc = add_tlb_entry(base_addr, TLB_WORD0_SIZE_64KB, tlb_i)) == 0) {
+			if ((rc = add_tlb_entry(phys_addr, virt_addr,
+						TLB_WORD0_SIZE_64KB, tlb_i)) == 0) {
 				mem_size -= TLB_64KB_SIZE;
-				base_addr += TLB_64KB_SIZE;
+				phys_addr += TLB_64KB_SIZE;
+				virt_addr += TLB_64KB_SIZE;
 			}
-		} else if (((base_addr & TLB_16KB_ALIGN_MASK) == base_addr) &&
+		} else if (((phys_addr & TLB_16KB_ALIGN_MASK) == phys_addr) &&
 			   (mem_size >= TLB_16KB_SIZE)) {
 			/* Add a 16KB TLB entry */
-			if ((rc = add_tlb_entry(base_addr, TLB_WORD0_SIZE_16KB, tlb_i)) == 0) {
+			if ((rc = add_tlb_entry(phys_addr, virt_addr,
+						TLB_WORD0_SIZE_16KB, tlb_i)) == 0) {
 				mem_size -= TLB_16KB_SIZE;
-				base_addr += TLB_16KB_SIZE;
+				phys_addr += TLB_16KB_SIZE;
+				virt_addr += TLB_16KB_SIZE;
 			}
-		} else if (((base_addr & TLB_4KB_ALIGN_MASK) == base_addr) &&
+		} else if (((phys_addr & TLB_4KB_ALIGN_MASK) == phys_addr) &&
 			   (mem_size >= TLB_4KB_SIZE)) {
 			/* Add a 4KB TLB entry */
-			if ((rc = add_tlb_entry(base_addr, TLB_WORD0_SIZE_4KB, tlb_i)) == 0) {
+			if ((rc = add_tlb_entry(phys_addr, virt_addr,
+						TLB_WORD0_SIZE_4KB, tlb_i)) == 0) {
 				mem_size -= TLB_4KB_SIZE;
-				base_addr += TLB_4KB_SIZE;
+				phys_addr += TLB_4KB_SIZE;
+				virt_addr += TLB_4KB_SIZE;
 			}
-		} else if (((base_addr & TLB_1KB_ALIGN_MASK) == base_addr) &&
+		} else if (((phys_addr & TLB_1KB_ALIGN_MASK) == phys_addr) &&
 			   (mem_size >= TLB_1KB_SIZE)) {
 			/* Add a 1KB TLB entry */
-			if ((rc = add_tlb_entry(base_addr, TLB_WORD0_SIZE_1KB, tlb_i)) == 0) {
+			if ((rc = add_tlb_entry(phys_addr, virt_addr,
+						TLB_WORD0_SIZE_1KB, tlb_i)) == 0) {
 				mem_size -= TLB_1KB_SIZE;
-				base_addr += TLB_1KB_SIZE;
+				phys_addr += TLB_1KB_SIZE;
+				virt_addr += TLB_1KB_SIZE;
 			}
 		} else {
 			printf("ERROR: no TLB size exists for the base address 0x%0X.\n",
-				base_addr);
+				phys_addr);
 		}
 
 		if (rc != 0)
 			printf("ERROR: no TLB entries available for the base addr 0x%0X.\n",
-				base_addr);
+				phys_addr);
 	}
 
 	return;
@@ -166,16 +185,16 @@ static void program_tlb_addr(unsigned long base_addr, unsigned long mem_size,
  * Common usage for boards with SDRAM DIMM modules to dynamically
  * configure the TLB's for the SDRAM
  */
-void program_tlb(u32 start, u32 size, u32 tlb_word2_i_value)
+void program_tlb(u32 phys_addr, u32 virt_addr, u32 size, u32 tlb_word2_i_value)
 {
 	region_t region_array;
 
-	region_array.base = start;
+	region_array.base = phys_addr;
 	region_array.size = size;
 	region_array.tlb_word2_i_value = tlb_word2_i_value;	/* en-/disable cache */
 
 	/* Call the routine to add in the tlb entries for the memory regions */
-	program_tlb_addr(region_array.base, region_array.size,
+	program_tlb_addr(region_array.base, virt_addr, region_array.size,
 			 region_array.tlb_word2_i_value);
 
 	return;

cpu/ppc4xx/traps.c

@@ -36,6 +36,8 @@
 #include <command.h>
 #include <asm/processor.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
 int (*debugger_exception_handler)(struct pt_regs *) = 0;
 #endif
@@ -45,8 +47,7 @@ extern unsigned long search_exception_table(unsigned long);
 
 /* THIS NEEDS CHANGING to use the board info structure.
  */
-#define END_OF_MEM	0x00400000
-
+#define END_OF_MEM	(gd->bd->bi_memstart + gd->bd->bi_memsize)
 
 static __inline__ void set_tsr(unsigned long val)
 {
@@ -110,7 +111,7 @@ void show_regs(struct pt_regs * regs)
 {
 	int i;
 
-	printf("NIP: %08lX XER: %08lX LR: %08lX REGS: %p TRAP: %04lx DAR: %08lX\n",
+	printf("NIP: %08lX XER: %08lX LR: %08lX REGS: %p TRAP: %04lx DEAR: %08lX\n",
 	       regs->nip, regs->xer, regs->link, regs, regs->trap, regs->dar);
 	printf("MSR: %08lx EE: %01x PR: %01x FP: %01x ME: %01x IR/DR: %01x%01x\n",
 	       regs->msr, regs->msr&MSR_EE ? 1 : 0, regs->msr&MSR_PR ? 1 : 0,
@@ -120,14 +121,12 @@ void show_regs(struct pt_regs * regs)
 
 	printf("\n");
 	for (i = 0;  i < 32;  i++) {
-		if ((i % 8) == 0)
-		{
+		if ((i % 8) == 0) {
 			printf("GPR%02d: ", i);
 		}
 
 		printf("%08lX ", regs->gpr[i]);
-		if ((i % 8) == 7)
-		{
+		if ((i % 8) == 7) {
 			printf("\n");
 		}
 	}
@@ -139,13 +138,16 @@ _exception(int signr, struct pt_regs *regs)
 {
 	show_regs(regs);
 	print_backtrace((unsigned long *)regs->gpr[1]);
-	panic("Exception in kernel pc %lx signal %d",regs->nip,signr);
+	panic("Exception");
 }
 
 void
 MachineCheckException(struct pt_regs *regs)
 {
-	unsigned long fixup;
+	unsigned long fixup, val;
+#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+	u32 value2;
+#endif
 
 	/* Probing PCI using config cycles cause this exception
 	 * when a device is not present.  Catch it and return to
@@ -161,26 +163,132 @@ MachineCheckException(struct pt_regs *regs)
 		return;
 #endif
 
-	printf("Machine check in kernel mode.\n");
+	printf("Machine Check Exception.\n");
 	printf("Caused by (from msr): ");
-	printf("regs %p ",regs);
-	switch( regs->msr & 0x000F0000) {
-	case (0x80000000>>12):
-		printf("Machine check signal - probably due to mm fault\n"
-		       "with mmu off\n");
+	printf("regs %p ", regs);
+
+	val = get_esr();
+
+#if !defined(CONFIG_440)
+	if (val& ESR_IMCP) {
+		printf("Instruction");
+		mtspr(ESR, val & ~ESR_IMCP);
+	} else {
+		printf("Data");
+	}
+	printf(" machine check.\n");
+
+#elif defined(CONFIG_440)
+	if (val& ESR_IMCP){
+		printf("Instruction Synchronous Machine Check exception\n");
+		mtspr(SPRN_ESR, val & ~ESR_IMCP);
+	} else {
+		val = mfspr(MCSR);
+		if (val & MCSR_IB)
+			printf("Instruction Read PLB Error\n");
+		if (val & MCSR_DRB)
+			printf("Data Read PLB Error\n");
+		if (val & MCSR_DWB)
+			printf("Data Write PLB Error\n");
+		if (val & MCSR_TLBP)
+			printf("TLB Parity Error\n");
+		if (val & MCSR_ICP){
+			/*flush_instruction_cache(); */
+			printf("I-Cache Parity Error\n");
+		}
+		if (val & MCSR_DCSP)
+			printf("D-Cache Search Parity Error\n");
+		if (val & MCSR_DCFP)
+			printf("D-Cache Flush Parity Error\n");
+		if (val & MCSR_IMPE)
+			printf("Machine Check exception is imprecise\n");
+
+		/* Clear MCSR */
+		mtspr(SPRN_MCSR, val);
+	}
+#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+	mfsdram(DDR0_00, val) ;
+	printf("DDR0: DDR0_00 %p\n", val);
+	val = (val >> 16) & 0xff;
+	if (val & 0x80)
+		printf("DDR0: At least one interrupt active\n");
+	if (val & 0x40)
+		printf("DDR0: DRAM initialization complete.\n");
+	if (val & 0x20)
+		printf("DDR0: Multiple uncorrectable ECC events.\n");
+	if (val & 0x10)
+		printf("DDR0: Single uncorrectable ECC event.\n");
+	if (val & 0x08)
+		printf("DDR0: Multiple correctable ECC events.\n");
+	if (val & 0x04)
+		printf("DDR0: Single correctable ECC event.\n");
+	if (val & 0x02)
+		printf("Multiple accesses outside the defined"
+		       " physical memory space detected\n");
+	if (val & 0x01)
+		printf("DDR0: Single access outside the defined"
+		       " physical memory space detected.\n");
+
+	mfsdram(DDR0_01, val);
+	val = (val >> 8) & 0x7;
+	switch (val ) {
+	case 0:
+		printf("DDR0: Write Out-of-Range command\n");
+		break;
+	case 1:
+		printf("DDR0: Read Out-of-Range command\n");
 		break;
-	case (0x80000000>>13):
-		printf("Transfer error ack signal\n");
+	case 2:
+		printf("DDR0: Masked write Out-of-Range command\n");
 		break;
-	case (0x80000000>>14):
-		printf("Data parity signal\n");
+	case 4:
+		printf("DDR0: Wrap write Out-of-Range command\n");
 		break;
-	case (0x80000000>>15):
-		printf("Address parity signal\n");
+	case 5:
+		printf("DDR0: Wrap read Out-of-Range command\n");
 		break;
 	default:
-		printf("Unknown values in msr\n");
+		mfsdram(DDR0_01, value2);
+		printf("DDR0: No DDR0 error know 0x%x %p\n", val, value2);
 	}
+	mfsdram(DDR0_23, val);
+	if ( (val >> 16) & 0xff)
+		printf("DDR0: Syndrome for correctable ECC event 0x%x\n",
+		       (val >> 16) & 0xff);
+	mfsdram(DDR0_23, val);
+	if ( (val >> 8) & 0xff)
+		printf("DDR0: Syndrome for uncorrectable ECC event 0x%x\n",
+		       (val >> 8) & 0xff);
+	mfsdram(DDR0_33, val);
+	if (val)
+		printf("DDR0: Address of command that caused an "
+		       "Out-of-Range interrupt %p\n", val);
+	mfsdram(DDR0_34, val);
+	if (val)
+		printf("DDR0: Address of uncorrectable ECC event %p\n", val);
+	mfsdram(DDR0_35, val);
+	if (val)
+		printf("DDR0: Address of uncorrectable ECC event %p\n", val);
+	mfsdram(DDR0_36, val);
+	if (val)
+		printf("DDR0: Data of uncorrectable ECC event 0x%08x\n", val);
+	mfsdram(DDR0_37, val);
+	if (val)
+		printf("DDR0: Data of uncorrectable ECC event 0x%08x\n", val);
+	mfsdram(DDR0_38, val);
+	if (val)
+		printf("DDR0: Address of correctable ECC event %p\n", val);
+	mfsdram(DDR0_39, val);
+	if (val)
+		printf("DDR0: Address of correctable ECC event %p\n", val);
+	mfsdram(DDR0_40, val);
+	if (val)
+		printf("DDR0: Data of correctable ECC event 0x%08x\n", val);
+	mfsdram(DDR0_41, val);
+	if (val)
+		printf("DDR0: Data of correctable ECC event 0x%08x\n", val);
+#endif /* CONFIG_440EPX */
+#endif /* CONFIG_440 */
 	show_regs(regs);
 	print_backtrace((unsigned long *)regs->gpr[1]);
 	panic("machine check");
@@ -224,7 +332,7 @@ ProgramCheckException(struct pt_regs *regs)
 }
 
 void
-PITException(struct pt_regs *regs)
+DecrementerPITException(struct pt_regs *regs)
 {
 	/*
 	 * Reset PIT interrupt
@@ -272,17 +380,17 @@ addr_probe(uint *addr)
 
 	__asm__ __volatile__(			\
 		"1:	lwz %0,0(%1)\n"		\
-						"	eieio\n"		\
-						"	li %0,0\n"		\
-						"2:\n"				\
-						".section .fixup,\"ax\"\n"	\
-						"3:	li %0,-1\n"		\
-						"	b 2b\n"			\
-						".section __ex_table,\"a\"\n"	\
-						"	.align 2\n"		\
-						"	.long 1b,3b\n"		\
-						".text"				\
-						: "=r" (retval) : "r"(addr));
+		"	eieio\n"		\
+		"	li %0,0\n"		\
+		"2:\n"				\
+		".section .fixup,\"ax\"\n"	\
+		"3:	li %0,-1\n"		\
+		"	b 2b\n"			\
+		".section __ex_table,\"a\"\n"	\
+		"	.align 2\n"		\
+		"	.long 1b,3b\n"		\
+		".text"				\
+		: "=r" (retval) : "r"(addr));
 
 	return (retval);
 #endif

disk/part.c

@@ -180,7 +180,6 @@ void dev_print (block_dev_desc_t *dev_desc)
      (CONFIG_COMMANDS & CFG_CMD_SCSI)	|| \
      (CONFIG_COMMANDS & CFG_CMD_USB)	|| \
      defined(CONFIG_MMC)		|| \
-     (defined(CONFIG_MMC) && defined(CONFIG_LPC2292)) || \
      defined(CONFIG_SYSTEMACE)          )
 
 #if defined(CONFIG_MAC_PARTITION) || \
@@ -223,7 +222,7 @@ void init_part (block_dev_desc_t * dev_desc)
 int get_partition_info (block_dev_desc_t *dev_desc, int part
 					, disk_partition_t *info)
 {
-		switch (dev_desc->part_type) {
+	switch (dev_desc->part_type) {
 #ifdef CONFIG_MAC_PARTITION
 	case PART_TYPE_MAC:
 		if (get_partition_info_mac(dev_desc,part,info) == 0) {

doc/README.ppc440

@@ -146,12 +146,13 @@ that maps in a single PCI I/O space and PCI memory space. The I/O
 space begins at PCI I/O address 0 and the PCI memory space is
 256 MB starting at PCI address CFG_PCI_TARGBASE. After the
 pci_controller structure is initialized, the cpu-specific code will
-call the routine pci_pre_init() if the CFG_PCI_PRE_INIT flag is
-defined. This routine is implemented by board-specific code & is where
-the board can over-ride/extend the default pci_controller structure
-settings and do other pre-initialization tasks. If pci_pre_init()
-returns a value of zero, PCI initialization is aborted; otherwise the
-controller structure is registered and initialization continues.
+call the routine pci_pre_init(). This routine is implemented by
+board-specific code & is where the board can over-ride/extend the
+default pci_controller structure settings and exspecially provide
+a routine to map the PCI interrupts and do other pre-initialization
+tasks. If pci_pre_init() returns a value of zero, PCI initialization
+is aborted; otherwise the controller structure is registered and
+initialization continues.
 
 The default 440GP PCI target configuration is minimal -- it assumes that
 the strapping registers are set as necessary. Since the strapping bits

drivers/Makefile

@@ -27,7 +27,7 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)libdrivers.a
 
-COBJS	= 3c589.o 5701rls.o ali512x.o atmel_usart.o \
+COBJS	= 3c589.o 5701rls.o ali512x.o ata_piix.o atmel_usart.o \
 	  bcm570x.o bcm570x_autoneg.o cfb_console.o cfi_flash.o \
 	  cs8900.o ct69000.o dataflash.o dc2114x.o dm9000x.o \
 	  e1000.o eepro100.o enc28j60.o \

drivers/ata_piix.c

@@ -0,0 +1,216 @@
+/*
+ * Copyright (C) Procsys. All rights reserved.
+ * Author: Mushtaq Khan <mushtaq_k@procsys.com>
+ *			<mushtaqk_921@yahoo.co.in>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * with the reference to ata_piix driver in kernel 2.4.32
+ */
+
+/*
+ * This file contains SATA controller and SATA drive initialization functions
+ */
+
+#include <common.h>
+#include <pci.h>
+#include <command.h>
+#include <config.h>
+#include <asm/byteorder.h>
+#include <ide.h>
+#include <ata.h>
+
+#ifdef CFG_ATA_PIIX		/*ata_piix driver */
+
+#define DEBUG_SATA 0		/*For debug prints set DEBUG_SATA to 1 */
+
+#define DRV_DECL		/*For file specific declarations */
+#include <sata.h>
+#undef DRV_DECL
+
+/*Macros realted to PCI*/
+#define PCI_SATA_BUS	0x00
+#define PCI_SATA_DEV	0x1f
+#define PCI_SATA_FUNC	0x02
+
+#define PCI_SATA_BASE1 0x10
+#define PCI_SATA_BASE2 0x14
+#define PCI_SATA_BASE3 0x18
+#define PCI_SATA_BASE4 0x1c
+#define PCI_SATA_BASE5 0x20
+#define PCI_PMR         0x90
+#define PCI_PI          0x09
+#define PCI_PCS         0x92
+#define PCI_DMA_CTL     0x48
+
+#define PORT_PRESENT (1<<0)
+#define PORT_ENABLED (1<<4)
+
+u32 bdf;
+u32 iobase1 = 0;		/*Primary cmd block */
+u32 iobase2 = 0;		/*Primary ctl block */
+u32 iobase3 = 0;		/*Sec cmd block */
+u32 iobase4 = 0;		/*sec ctl block */
+u32 iobase5 = 0;		/*BMDMA*/
+int
+pci_sata_init (void)
+{
+	u32 bus = PCI_SATA_BUS;
+	u32 dev = PCI_SATA_DEV;
+	u32 fun = PCI_SATA_FUNC;
+	u16 cmd = 0;
+	u8 lat = 0, pcibios_max_latency = 0xff;
+	u8 pmr;			/*Port mapping reg */
+	u8 pi;			/*Prgming Interface reg */
+
+	bdf = PCI_BDF (bus, dev, fun);
+	pci_read_config_dword (bdf, PCI_SATA_BASE1, &iobase1);
+	pci_read_config_dword (bdf, PCI_SATA_BASE2, &iobase2);
+	pci_read_config_dword (bdf, PCI_SATA_BASE3, &iobase3);
+	pci_read_config_dword (bdf, PCI_SATA_BASE4, &iobase4);
+	pci_read_config_dword (bdf, PCI_SATA_BASE5, &iobase5);
+
+	if ((iobase1 == 0xFFFFFFFF) || (iobase2 == 0xFFFFFFFF) ||
+	    (iobase3 == 0xFFFFFFFF) || (iobase4 == 0xFFFFFFFF) ||
+	    (iobase5 == 0xFFFFFFFF)) {
+		printf ("error no base addr for SATA controller\n");
+		return 1;
+	 /*ERROR*/}
+
+	iobase1 &= 0xFFFFFFFE;
+	iobase2 &= 0xFFFFFFFE;
+	iobase3 &= 0xFFFFFFFE;
+	iobase4 &= 0xFFFFFFFE;
+	iobase5 &= 0xFFFFFFFE;
+
+	/*check for mode */
+	pci_read_config_byte (bdf, PCI_PMR, &pmr);
+	if (pmr > 1) {
+		printf ("combined mode not supported\n");
+		return 1;
+	}
+
+	pci_read_config_byte (bdf, PCI_PI, &pi);
+	if ((pi & 0x05) != 0x05) {
+		printf ("Sata is in Legacy mode\n");
+		return 1;
+	} else {
+		printf ("sata is in Native mode\n");
+	}
+
+	/*MASTER CFG AND IO CFG */
+	pci_read_config_word (bdf, PCI_COMMAND, &cmd);
+	cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_IO;
+	pci_write_config_word (bdf, PCI_COMMAND, cmd);
+	pci_read_config_byte (dev, PCI_LATENCY_TIMER, &lat);
+
+	if (lat < 16)
+		lat = (64 <= pcibios_max_latency) ? 64 : pcibios_max_latency;
+	else if (lat > pcibios_max_latency)
+		lat = pcibios_max_latency;
+	pci_write_config_byte (dev, PCI_LATENCY_TIMER, lat);
+
+	return 0;
+}
+
+int
+sata_bus_probe (int port_no)
+{
+	int orig_mask, mask;
+	u16 pcs;
+
+	mask = (PORT_PRESENT << port_no);
+	pci_read_config_word (bdf, PCI_PCS, &pcs);
+	orig_mask = (int) pcs & 0xff;
+	if ((orig_mask & mask) != mask)
+		return 0;
+	else
+		return 1;
+}
+
+int
+init_sata (void)
+{
+	u8 i, rv = 0;
+
+	for (i = 0; i < CFG_SATA_MAXDEVICES; i++) {
+		sata_dev_desc[i].type = DEV_TYPE_UNKNOWN;
+		sata_dev_desc[i].if_type = IF_TYPE_IDE;
+		sata_dev_desc[i].dev = i;
+		sata_dev_desc[i].part_type = PART_TYPE_UNKNOWN;
+		sata_dev_desc[i].blksz = 0;
+		sata_dev_desc[i].lba = 0;
+		sata_dev_desc[i].block_read = sata_read;
+	}
+
+	rv = pci_sata_init ();
+	if (rv == 1) {
+		printf ("pci initialization failed\n");
+		return 1;
+	}
+
+	port[0].port_no = 0;
+	port[0].ioaddr.cmd_addr = iobase1;
+	port[0].ioaddr.altstatus_addr = port[0].ioaddr.ctl_addr =
+	    iobase2 | ATA_PCI_CTL_OFS;
+	port[0].ioaddr.bmdma_addr = iobase5;
+
+	port[1].port_no = 1;
+	port[1].ioaddr.cmd_addr = iobase3;
+	port[1].ioaddr.altstatus_addr = port[1].ioaddr.ctl_addr =
+	    iobase4 | ATA_PCI_CTL_OFS;
+	port[1].ioaddr.bmdma_addr = iobase5 + 0x8;
+
+	for (i = 0; i < CFG_SATA_MAXBUS; i++)
+		sata_port (&port[i].ioaddr);
+
+	for (i = 0; i < CFG_SATA_MAXBUS; i++) {
+		if (!(sata_bus_probe (i))) {
+			port[i].port_state = 0;
+			printf ("SATA#%d port is not present \n", i);
+		} else {
+			printf ("SATA#%d port is present\n", i);
+			if (sata_bus_softreset (i)) {
+				port[i].port_state = 0;
+			} else {
+				port[i].port_state = 1;
+			}
+		}
+	}
+
+	for (i = 0; i < CFG_SATA_MAXBUS; i++) {
+		u8 j, devno;
+
+		if (port[i].port_state == 0)
+			continue;
+		for (j = 0; j < CFG_SATA_DEVS_PER_BUS; j++) {
+			sata_identify (i, j);
+			set_Feature_cmd (i, j);
+			devno = i * CFG_SATA_DEVS_PER_BUS + j;
+			if ((sata_dev_desc[devno].lba > 0) &&
+			    (sata_dev_desc[devno].blksz > 0)) {
+				dev_print (&sata_dev_desc[devno]);
+				/* initialize partition type */
+				init_part (&sata_dev_desc[devno]);
+				if (curr_dev < 0)
+					curr_dev =
+					    i * CFG_SATA_DEVS_PER_BUS + j;
+			}
+		}
+	}
+	return 0;
+}
+#endif

drivers/tsec.c

@@ -65,33 +65,31 @@ struct tsec_info_struct {
  *   FEC_PHYIDX
  */
 static struct tsec_info_struct tsec_info[] = {
-#if defined(CONFIG_MPC85XX_TSEC1) || defined(CONFIG_MPC83XX_TSEC1)
-#if defined(CONFIG_MPC8544DS)
+#if defined(CONFIG_TSEC1)
+#if defined(CONFIG_MPC8544DS) || defined(CONFIG_MPC8641HPCN)
 	{TSEC1_PHY_ADDR, TSEC_GIGABIT | TSEC_REDUCED, TSEC1_PHYIDX},
 #else
 	{TSEC1_PHY_ADDR, TSEC_GIGABIT, TSEC1_PHYIDX},
 #endif
-#elif defined(CONFIG_MPC86XX_TSEC1)
-	{TSEC1_PHY_ADDR, TSEC_GIGABIT | TSEC_REDUCED, TSEC1_PHYIDX},
-#else
 	{0, 0, 0},
 #endif
-#if defined(CONFIG_MPC85XX_TSEC2) || defined(CONFIG_MPC83XX_TSEC2)
-	{TSEC2_PHY_ADDR, TSEC_GIGABIT, TSEC2_PHYIDX},
-#elif defined(CONFIG_MPC86XX_TSEC2)
+#if defined(CONFIG_TSEC2)
+#if defined(CONFIG_MPC8641HPCN)
 	{TSEC2_PHY_ADDR, TSEC_GIGABIT | TSEC_REDUCED, TSEC2_PHYIDX},
 #else
+	{TSEC2_PHY_ADDR, TSEC_GIGABIT, TSEC2_PHYIDX},
+#endif
 	{0, 0, 0},
 #endif
 #ifdef CONFIG_MPC85XX_FEC
 	{FEC_PHY_ADDR, 0, FEC_PHYIDX},
 #else
-#if defined(CONFIG_MPC85XX_TSEC3) || defined(CONFIG_MPC83XX_TSEC3) || defined(CONFIG_MPC86XX_TSEC3)
+#if defined(CONFIG_TSEC3)
 	{TSEC3_PHY_ADDR, TSEC_GIGABIT | TSEC_REDUCED, TSEC3_PHYIDX},
 #else
 	{0, 0, 0},
 #endif
-#if defined(CONFIG_MPC85XX_TSEC4) || defined(CONFIG_MPC83XX_TSEC4) || defined(CONFIG_MPC86XX_TSEC4)
+#if defined(CONFIG_TSEC4)
 	{TSEC4_PHY_ADDR, TSEC_GIGABIT | TSEC_REDUCED, TSEC4_PHYIDX},
 #else
 	{0, 0, 0},
@@ -928,6 +926,33 @@ struct phy_info phy_info_BCM5461S = {
 	},
 };
 
+struct phy_info phy_info_BCM5464S = {
+	0x02060b1,	/* 5464 ID */
+	"Broadcom BCM5464S",
+	0, /* not clear to me what minor revisions we can shift away */
+	(struct phy_cmd[]) { /* config */
+		/* Reset and configure the PHY */
+		{MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
+		{MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL},
+		{MIIM_ANAR, MIIM_ANAR_INIT, NULL},
+		{MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
+		{MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
+		{miim_end,}
+	},
+	(struct phy_cmd[]) { /* startup */
+		/* Status is read once to clear old link state */
+		{MIIM_STATUS, miim_read, NULL},
+		/* Auto-negotiate */
+		{MIIM_STATUS, miim_read, &mii_parse_sr},
+		/* Read the status */
+		{MIIM_BCM54xx_AUXSTATUS, miim_read, &mii_parse_BCM54xx_sr},
+		{miim_end,}
+	},
+	(struct phy_cmd[]) { /* shutdown */
+		{miim_end,}
+	},
+};
+
 struct phy_info phy_info_M88E1011S = {
 	0x01410c6,
 	"Marvell 88E1011S",
@@ -1292,6 +1317,7 @@ struct phy_info *phy_info[] = {
 	&phy_info_cis8204,
 	&phy_info_cis8201,
 	&phy_info_BCM5461S,
+	&phy_info_BCM5464S,
 	&phy_info_M88E1011S,
 	&phy_info_M88E1111S,
 	&phy_info_M88E1145,

fs/fat/fat.c

@@ -70,10 +70,11 @@ int
 fat_register_device(block_dev_desc_t *dev_desc, int part_no)
 {
 	unsigned char buffer[SECTOR_SIZE];
+	disk_partition_t info;
 
 	if (!dev_desc->block_read)
 		return -1;
-	cur_dev=dev_desc;
+	cur_dev = dev_desc;
 	/* check if we have a MBR (on floppies we have only a PBR) */
 	if (dev_desc->block_read (dev_desc->dev, 0, 1, (ulong *) buffer) != 1) {
 		printf ("** Can't read from device %d **\n", dev_desc->dev);
@@ -84,36 +85,39 @@ fat_register_device(block_dev_desc_t *dev_desc, int part_no)
 		/* no signature found */
 		return -1;
 	}
-	if(!strncmp((char *)&buffer[DOS_FS_TYPE_OFFSET],"FAT",3)) {
-		/* ok, we assume we are on a PBR only */
-		cur_part = 1;
-		part_offset=0;
-	}
-	else {
 #if ((CONFIG_COMMANDS & CFG_CMD_IDE)	|| \
      (CONFIG_COMMANDS & CFG_CMD_SCSI)	|| \
      (CONFIG_COMMANDS & CFG_CMD_USB)	|| \
-     (defined(CONFIG_MMC) && defined(CONFIG_LPC2292)) || \
+     (defined(CONFIG_MMC)) || \
      defined(CONFIG_SYSTEMACE)          )
-		disk_partition_t info;
-		if(!get_partition_info(dev_desc, part_no, &info)) {
-			part_offset = info.start;
-			cur_part = part_no;
-		}
-		else {
-			printf ("** Partition %d not valid on device %d **\n",part_no,dev_desc->dev);
-			return -1;
-		}
+	/* First we assume, there is a MBR */
+	if (!get_partition_info (dev_desc, part_no, &info)) {
+		part_offset = info.start;
+		cur_part = part_no;
+	} else if (!strncmp((char *)&buffer[DOS_FS_TYPE_OFFSET], "FAT", 3)) {
+		/* ok, we assume we are on a PBR only */
+		cur_part = 1;
+		part_offset = 0;
+	} else {
+		printf ("** Partition %d not valid on device %d **\n", part_no, dev_desc->dev);
+		return -1;
+	}
 #else
+	if(!strncmp((char *)&buffer[DOS_FS_TYPE_OFFSET],"FAT",3)) {
+ 		/* ok, we assume we are on a PBR only */
+ 		cur_part = 1;
+		part_offset = 0;
+		info.start = part_offset;
+	} else {
 		/* FIXME we need to determine the start block of the
 		 * partition where the DOS FS resides. This can be done
 		 * by using the get_partition_info routine. For this
 		 * purpose the libpart must be included.
 		 */
-		part_offset=32;
+		part_offset = 32;
 		cur_part = 1;
-#endif
 	}
+#endif
 	return 0;
 }
 

include/74xx_7xx.h

@@ -34,6 +34,7 @@
  * Exception offsets (PowerPC standard)
  */
 #define EXC_OFF_SYS_RESET        0x0100      /* default system reset offset */
+#define _START_OFFSET		EXC_OFF_SYS_RESET
 
 /*----------------------------------------------------------------
  * l2cr values

include/asm-ppc/gpio.h

@@ -45,12 +45,14 @@ typedef enum gpio_driver { GPIO_DIS, GPIO_IN, GPIO_OUT, GPIO_BI } gpio_driver_t;
 typedef enum gpio_out	 { GPIO_OUT_0, GPIO_OUT_1, GPIO_OUT_NO_CHG } gpio_out_t;
 
 typedef struct {
-	unsigned long add;	/* gpio core base address	*/
-	gpio_driver_t in_out;	/* Driver Setting		*/
-	gpio_select_t alt_nb;	/* Selected Alternate		*/
+	unsigned long	add;	/* gpio core base address	*/
+	gpio_driver_t	in_out;	/* Driver Setting		*/
+	gpio_select_t	alt_nb;	/* Selected Alternate		*/
+	gpio_out_t	out_val;/* Default Output Value		*/
 } gpio_param_s;
 #endif
 
 void gpio_config(int pin, int in_out, int gpio_alt, int out_val);
 void gpio_write_bit(int pin, int val);
+int gpio_read_out_bit(int pin);
 void gpio_set_chip_configuration(void);

include/asm-ppc/processor.h

@@ -35,18 +35,18 @@
 #define MSR_DWE         (1<<10)         /* Debug Wait Enable (4xx) */
 #define MSR_UBLE        (1<<10)         /* BTB lock enable (e500) */
 #define MSR_BE		(1<<9)		/* Branch Trace */
-#define MSR_DE		(1<<9) 		/* Debug Exception Enable */
+#define MSR_DE		(1<<9)		/* Debug Exception Enable */
 #define MSR_FE1		(1<<8)		/* Floating Exception mode 1 */
 #define MSR_IP		(1<<6)		/* Exception prefix 0x000/0xFFF */
-#define MSR_IR		(1<<5) 		/* Instruction Relocate */
+#define MSR_IR		(1<<5)		/* Instruction Relocate */
 #define MSR_IS          (1<<5)          /* Book E Instruction space */
-#define MSR_DR		(1<<4) 		/* Data Relocate */
+#define MSR_DR		(1<<4)		/* Data Relocate */
 #define MSR_DS          (1<<4)          /* Book E Data space */
 #define MSR_PE		(1<<3)		/* Protection Enable */
 #define MSR_PX		(1<<2)		/* Protection Exclusive Mode */
 #define MSR_PMM         (1<<2)          /* Performance monitor mark bit (e500) */
 #define MSR_RI		(1<<1)		/* Recoverable Exception */
-#define MSR_LE		(1<<0) 		/* Little Endian */
+#define MSR_LE		(1<<0)		/* Little Endian */
 
 #ifdef CONFIG_APUS_FAST_EXCEPT
 #define MSR_		MSR_ME|MSR_IP|MSR_RI
@@ -123,9 +123,9 @@
 #define   DBCR_EDM	0x80000000
 #define   DBCR_IDM	0x40000000
 #define   DBCR_RST(x)	(((x) & 0x3) << 28)
-#define     DBCR_RST_NONE       	0
-#define     DBCR_RST_CORE       	1
-#define     DBCR_RST_CHIP       	2
+#define     DBCR_RST_NONE		0
+#define     DBCR_RST_CORE		1
+#define     DBCR_RST_CHIP		2
 #define     DBCR_RST_SYSTEM		3
 #define   DBCR_IC	0x08000000	/* Instruction Completion Debug Evnt */
 #define   DBCR_BT	0x04000000	/* Branch Taken Debug Event */
@@ -266,7 +266,7 @@
 #define SPRN_ICMP	0x3D5	/* Instruction TLB Compare Register */
 #define SPRN_ICTC	0x3FB	/* Instruction Cache Throttling Control Reg */
 #define SPRN_IMISS	0x3D4	/* Instruction TLB Miss Register */
-#define SPRN_IMMR	0x27E  	/* Internal Memory Map Register */
+#define SPRN_IMMR	0x27E	/* Internal Memory Map Register */
 #define SPRN_LDSTCR	0x3F8   /* Load/Store Control Register */
 #define SPRN_L2CR	0x3F9	/* Level 2 Cache Control Regsiter */
 #define SPRN_LR		0x008	/* Link Register */
@@ -308,7 +308,7 @@
 #define SPRN_SRR0	0x01A	/* Save/Restore Register 0 */
 #define SPRN_SRR1	0x01B	/* Save/Restore Register 1 */
 #define SPRN_SRR2	0x3DE	/* Save/Restore Register 2 */
-#define SPRN_SRR3 	0x3DF	/* Save/Restore Register 3 */
+#define SPRN_SRR3	0x3DF	/* Save/Restore Register 3 */
 #ifdef CONFIG_BOOKE
 #define SPRN_SVR	0x3FF	/* System Version Register */
 #else
@@ -451,6 +451,17 @@
 #define SPRN_PID1       0x279   /* Process ID Register 1 */
 #define SPRN_PID2       0x27a   /* Process ID Register 2 */
 #define SPRN_MCSR	0x23c	/* Machine Check Syndrome register */
+#ifdef CONFIG_440
+#define MCSR_MCS	0x80000000	/* Machine Check Summary */
+#define MCSR_IB		0x40000000	/* Instruction PLB Error */
+#define MCSR_DRB	0x20000000	/* Data Read PLB Error */
+#define MCSR_DWB	0x10000000	/* Data Write PLB Error */
+#define MCSR_TLBP	0x08000000	/* TLB Parity Error */
+#define MCSR_ICP	0x04000000	/* I-Cache Parity Error */
+#define MCSR_DCSP	0x02000000	/* D-Cache Search Parity Error */
+#define MCSR_DCFP	0x01000000	/* D-Cache Flush Parity Error */
+#define MCSR_IMPE	0x00800000	/* Imprecise Machine Check Exception */
+#endif
 #define ESR_ST          0x00800000      /* Store Operation */
 
 #if defined(CONFIG_MPC86xx)
@@ -484,17 +495,17 @@
 #define DBCR0	SPRN_DBCR0	/* Debug Control Register 0 */
 #define DBCR1	SPRN_DBCR1	/* Debug Control Register 1 */
 #define DBSR	SPRN_DBSR	/* Debug Status Register */
-#define DCMP	SPRN_DCMP      	/* Data TLB Compare Register */
-#define DEC	SPRN_DEC       	/* Decrement Register */
-#define DMISS	SPRN_DMISS     	/* Data TLB Miss Register */
+#define DCMP	SPRN_DCMP	/* Data TLB Compare Register */
+#define DEC	SPRN_DEC	/* Decrement Register */
+#define DMISS	SPRN_DMISS	/* Data TLB Miss Register */
 #define DSISR	SPRN_DSISR	/* Data Storage Interrupt Status Register */
-#define EAR	SPRN_EAR       	/* External Address Register */
+#define EAR	SPRN_EAR	/* External Address Register */
 #define ESR	SPRN_ESR	/* Exception Syndrome Register */
 #define HASH1	SPRN_HASH1	/* Primary Hash Address Register */
 #define HASH2	SPRN_HASH2	/* Secondary Hash Address Register */
 #define HID0	SPRN_HID0	/* Hardware Implementation Register 0 */
 #define HID1	SPRN_HID1	/* Hardware Implementation Register 1 */
-#define IABR	SPRN_IABR      	/* Instruction Address Breakpoint Register */
+#define IABR	SPRN_IABR	/* Instruction Address Breakpoint Register */
 #define IAC1	SPRN_IAC1	/* Instruction Address Register 1 */
 #define IAC2	SPRN_IAC2	/* Instruction Address Register 2 */
 #define IBAT0L	SPRN_IBAT0L	/* Instruction BAT 0 Lower Register */
@@ -511,13 +522,13 @@
 #define IBAT5U	SPRN_IBAT5U	/* Instruction BAT 5 Upper Register */
 #define IBAT6L	SPRN_IBAT6L	/* Instruction BAT 6 Lower Register */
 #define IBAT6U	SPRN_IBAT6U	/* Instruction BAT 6 Upper Register */
-#define IBAT7L 	SPRN_IBAT7L	/* Instruction BAT 7 Lower Register */
+#define IBAT7L	SPRN_IBAT7L	/* Instruction BAT 7 Lower Register */
 #define IBAT7U	SPRN_IBAT7U	/* Instruction BAT 7 Lower Register */
 #define ICMP	SPRN_ICMP	/* Instruction TLB Compare Register */
 #define IMISS	SPRN_IMISS	/* Instruction TLB Miss Register */
-#define IMMR	SPRN_IMMR      	/* PPC 860/821 Internal Memory Map Register */
+#define IMMR	SPRN_IMMR	/* PPC 860/821 Internal Memory Map Register */
 #define LDSTCR	SPRN_LDSTCR     /* Load/Store Control Register */
-#define L2CR	SPRN_L2CR    	/* PPC 750 L2 control register */
+#define L2CR	SPRN_L2CR	/* PPC 750 L2 control register */
 #define LR	SPRN_LR
 #define MBAR    SPRN_MBAR       /* System memory base address */
 #if defined(CONFIG_MPC86xx)
@@ -529,7 +540,7 @@
 #define SVR	SPRN_SVR	/* System-On-Chip Version Register */
 #define PVR	SPRN_PVR	/* Processor Version */
 #define RPA	SPRN_RPA	/* Required Physical Address Register */
-#define SDR1	SPRN_SDR1      	/* MMU hash base register */
+#define SDR1	SPRN_SDR1	/* MMU hash base register */
 #define SPR0	SPRN_SPRG0	/* Supervisor Private Registers */
 #define SPR1	SPRN_SPRG1
 #define SPR2	SPRN_SPRG2
@@ -544,6 +555,8 @@
 #define SPRG7   SPRN_SPRG7
 #define SRR0	SPRN_SRR0	/* Save and Restore Register 0 */
 #define SRR1	SPRN_SRR1	/* Save and Restore Register 1 */
+#define SRR2	SPRN_SRR2	/* Save and Restore Register 2 */
+#define SRR3	SPRN_SRR3	/* Save and Restore Register 3 */
 #define SVR	SPRN_SVR	/* System Version Register */
 #define TBRL	SPRN_TBRL	/* Time Base Read Lower Register */
 #define TBRU	SPRN_TBRU	/* Time Base Read Upper Register */
@@ -598,7 +611,7 @@
 #define IVOR35	SPRN_IVOR35
 #define MCSRR0	SPRN_MCSRR0
 #define MCSRR1	SPRN_MCSRR1
-#define L1CSR0 	SPRN_L1CSR0
+#define L1CSR0	SPRN_L1CSR0
 #define L1CSR1	SPRN_L1CSR1
 #define MCSR	SPRN_MCSR
 #define MMUCSR0	SPRN_MMUCSR0
@@ -607,7 +620,7 @@
 #define PID1	SPRN_PID1
 #define PID2	SPRN_PID2
 #define MAS0	SPRN_MAS0
-#define MAS1 	SPRN_MAS1
+#define MAS1	SPRN_MAS1
 #define MAS2	SPRN_MAS2
 #define MAS3	SPRN_MAS3
 #define MAS4	SPRN_MAS4
@@ -619,7 +632,7 @@
 
 #define DCRN_BEAR	0x090	/* Bus Error Address Register */
 #define DCRN_BESR	0x091	/* Bus Error Syndrome Register */
-#define   BESR_DSES    	0x80000000	/* Data-Side Error Status */
+#define   BESR_DSES	0x80000000	/* Data-Side Error Status */
 #define   BESR_DMES	0x40000000	/* DMA Error Status */
 #define   BESR_RWS	0x20000000	/* Read/Write Status */
 #define   BESR_ETMASK	0x1C000000	/* Error Type */
@@ -676,8 +689,8 @@
 #define   IOCR_E3LP	0x01000000
 #define   IOCR_E4TE	0x00800000
 #define   IOCR_E4LP	0x00400000
-#define   IOCR_EDT     	0x00080000
-#define   IOCR_SOR     	0x00040000
+#define   IOCR_EDT	0x00080000
+#define   IOCR_SOR	0x00040000
 #define   IOCR_EDO	0x00008000
 #define   IOCR_2XC	0x00004000
 #define   IOCR_ATC	0x00002000
@@ -802,7 +815,7 @@
 #define PVR_823		PVR_821
 #define PVR_850		PVR_821
 #define PVR_860		PVR_821
-#define PVR_7400       	0x000C0000
+#define PVR_7400	0x000C0000
 #define PVR_8240	0x00810100
 
 /*

include/ata.h

@@ -83,6 +83,66 @@
 #define ATA_DEVICE(x)	((x & 1)<<4)
 #define ATA_LBA		0xE0
 
+enum {
+	ATA_MAX_DEVICES = 1,	/* per bus/port */
+	ATA_MAX_PRD = 256,	/* we could make these 256/256 */
+	ATA_SECT_SIZE = 256,	/*256 words per sector */
+
+	/* bits in ATA command block registers */
+	ATA_HOB = (1 << 7),	/* LBA48 selector */
+	ATA_NIEN = (1 << 1),	/* disable-irq flag */
+	/*ATA_LBA                 = (1 << 6), */ /* LBA28 selector */
+	ATA_DEV1 = (1 << 4),	/* Select Device 1 (slave) */
+	ATA_DEVICE_OBS = (1 << 7) | (1 << 5),	/* obs bits in dev reg */
+	ATA_DEVCTL_OBS = (1 << 3),	/* obsolete bit in devctl reg */
+	ATA_BUSY = (1 << 7),	/* BSY status bit */
+	ATA_DRDY = (1 << 6),	/* device ready */
+	ATA_DF = (1 << 5),	/* device fault */
+	ATA_DRQ = (1 << 3),	/* data request i/o */
+	ATA_ERR = (1 << 0),	/* have an error */
+	ATA_SRST = (1 << 2),	/* software reset */
+	ATA_ABORTED = (1 << 2),	/* command aborted */
+	/* ATA command block registers */
+	ATA_REG_DATA = 0x00,
+	ATA_REG_ERR = 0x01,
+	ATA_REG_NSECT = 0x02,
+	ATA_REG_LBAL = 0x03,
+	ATA_REG_LBAM = 0x04,
+	ATA_REG_LBAH = 0x05,
+	ATA_REG_DEVICE = 0x06,
+	ATA_REG_STATUS = 0x07,
+	ATA_PCI_CTL_OFS = 0x02,
+	/* and their aliases */
+	ATA_REG_FEATURE = ATA_REG_ERR,
+	ATA_REG_CMD = ATA_REG_STATUS,
+	ATA_REG_BYTEL = ATA_REG_LBAM,
+	ATA_REG_BYTEH = ATA_REG_LBAH,
+	ATA_REG_DEVSEL = ATA_REG_DEVICE,
+	ATA_REG_IRQ = ATA_REG_NSECT,
+
+	/* SETFEATURES stuff */
+	SETFEATURES_XFER = 0x03,
+	XFER_UDMA_7 = 0x47,
+	XFER_UDMA_6 = 0x46,
+	XFER_UDMA_5 = 0x45,
+	XFER_UDMA_4 = 0x44,
+	XFER_UDMA_3 = 0x43,
+	XFER_UDMA_2 = 0x42,
+	XFER_UDMA_1 = 0x41,
+	XFER_UDMA_0 = 0x40,
+	XFER_MW_DMA_2 = 0x22,
+	XFER_MW_DMA_1 = 0x21,
+	XFER_MW_DMA_0 = 0x20,
+	XFER_PIO_4 = 0x0C,
+	XFER_PIO_3 = 0x0B,
+	XFER_PIO_2 = 0x0A,
+	XFER_PIO_1 = 0x09,
+	XFER_PIO_0 = 0x08,
+	XFER_SW_DMA_2 = 0x12,
+	XFER_SW_DMA_1 = 0x11,
+	XFER_SW_DMA_0 = 0x10,
+	XFER_PIO_SLOW = 0x00
+};
 /*
  * ATA Commands (only mandatory commands listed here)
  */

include/common.h

@@ -38,7 +38,7 @@ typedef volatile unsigned char	vu_char;
 #include <linux/string.h>
 #include <asm/ptrace.h>
 #include <stdarg.h>
-#if defined(CONFIG_PCI) && defined(CONFIG_440)
+#if defined(CONFIG_PCI) && (defined(CONFIG_4xx) && !defined(CONFIG_AP1000))
 #include <pci.h>
 #endif
 #if defined(CONFIG_8xx)
@@ -248,10 +248,11 @@ void	pci_init      (void);
 void	pci_init_board(void);
 void	pciinfo	      (int, int);
 
-#if defined(CONFIG_PCI) && defined(CONFIG_440)
-#   if defined(CFG_PCI_PRE_INIT)
+#if defined(CONFIG_PCI) && (defined(CONFIG_4xx) && !defined(CONFIG_AP1000))
     int	   pci_pre_init	       (struct pci_controller * );
-#   endif
+#endif
+
+#if defined(CONFIG_PCI) && defined(CONFIG_440)
 #   if defined(CFG_PCI_TARGET_INIT)
 	void	pci_target_init	     (struct pci_controller *);
 #   endif

include/configs/CPCI405.h

@@ -55,6 +55,10 @@
 #define CONFIG_MII		1	/* MII PHY management		*/
 #define CONFIG_PHY_ADDR		0	/* PHY address			*/
 #define CONFIG_LXT971_NO_SLEEP  1       /* disable sleep mode in LXT971 */
+#define CONFIG_RESET_PHY_R      1       /* use reset_phy() to disable phy sleep mode */
+
+#define CONFIG_NET_MULTI	1
+#undef  CONFIG_HAS_ETH1
 
 #define CONFIG_BOOTP_MASK	(CONFIG_BOOTP_DEFAULT | \
 				 CONFIG_BOOTP_DNS | \

include/configs/CPCI4052.h

@@ -37,6 +37,7 @@
 #define CONFIG_4xx		1	/* ...member of PPC4xx family	*/
 #define CONFIG_CPCI405		1	/* ...on a CPCI405 board	*/
 #define CONFIG_CPCI405_VER2	1	/* ...version 2			*/
+#undef  CONFIG_CPCI405_6U               /* enable this for 6U boards    */
 
 #define CONFIG_BOARD_EARLY_INIT_F 1	/* call board_early_init_f()	*/
 
@@ -56,6 +57,10 @@
 #define CONFIG_MII		1	/* MII PHY management		*/
 #define CONFIG_PHY_ADDR		0	/* PHY address			*/
 #define CONFIG_LXT971_NO_SLEEP  1       /* disable sleep mode in LXT971 */
+#define CONFIG_RESET_PHY_R      1       /* use reset_phy() to disable phy sleep mode */
+
+#define CONFIG_NET_MULTI	1
+#undef  CONFIG_HAS_ETH1
 
 #define CONFIG_RTC_M48T35A	1		/* ST Electronics M48 timekeeper */
 

include/configs/CPCI405AB.h

@@ -57,6 +57,10 @@
 #define CONFIG_MII		1	/* MII PHY management		*/
 #define CONFIG_PHY_ADDR		0	/* PHY address			*/
 #define CONFIG_LXT971_NO_SLEEP  1       /* disable sleep mode in LXT971 */
+#define CONFIG_RESET_PHY_R      1       /* use reset_phy() to disable phy sleep mode */
+
+#define CONFIG_NET_MULTI	1
+#undef  CONFIG_HAS_ETH1
 
 #define CONFIG_RTC_M48T35A	1		/* ST Electronics M48 timekeeper */
 

include/configs/CPCI405DT.h

@@ -56,6 +56,10 @@
 #define CONFIG_MII		1	/* MII PHY management		*/
 #define CONFIG_PHY_ADDR		0	/* PHY address			*/
 #define CONFIG_LXT971_NO_SLEEP  1       /* disable sleep mode in LXT971 */
+#define CONFIG_RESET_PHY_R      1       /* use reset_phy() to disable phy sleep mode */
+
+#define CONFIG_NET_MULTI	1
+#undef  CONFIG_HAS_ETH1
 
 #define CONFIG_RTC_M48T35A	1		/* ST Electronics M48 timekeeper */
 

include/configs/CPCI440.h

@@ -33,6 +33,7 @@
  *----------------------------------------------------------------------*/
 #define CONFIG_CPCI440		1	    /* Board is ebony		*/
 #define CONFIG_440GP		1	    /* Specifc GP support	*/
+#define CONFIG_440		1	    /* ... PPC440 family	*/
 #define CONFIG_4xx		1	    /* ... PPC4xx family	*/
 #define CONFIG_BOARD_EARLY_INIT_F 1	    /* Call board_early_init_f	*/
 #undef	CFG_DRAM_TEST			    /* Disable-takes long time! */

include/configs/JSE.h

@@ -49,6 +49,7 @@
   /* Map the SystemACE chip (CS#1) here. (Must be a multiple of 1Meg) */
 #define CONFIG_SYSTEMACE 1
 #define CFG_SYSTEMACE_BASE 0xf0000000
+#define CFG_SYSTEMACE_WIDTH 8
 #define CONFIG_DOS_PARTITION 1
 
   /* Use the On-Chip-Memory (OCM) as a temporary stack for the startup code. */