Convert SMC911X Ethernet driver to CONFIG_NET_MULTI API

All in-tree boards that use this controller have CONFIG_NET_MULTI added
Also:
 - changed CONFIG_DRIVER_SMC911X* to CONFIG_SMC911X*
 - cleaned up line lengths
 - modified all boards that override weak function in this driver
 - added

Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Tested-by: Mike Frysinger <vapier@gentoo.org>

board/bf548-ezkit/bf548-ezkit.c

@@ -7,6 +7,7 @@
  */
 
 #include <common.h>
+#include <netdev.h>
 #include <config.h>
 #include <command.h>
 #include <asm/blackfin.h>
@@ -77,3 +78,10 @@ int board_early_init_f(void)
 
 	return 0;
 }
+
+#ifdef CONFIG_SMC911X
+int board_eth_init(bd_t *bis)
+{
+	return smc911x_initialize(0, CONFIG_SMC911X_BASE);
+}
+#endif

board/cm-bf548/cm-bf548.c

@@ -9,6 +9,7 @@
 #include <common.h>
 #include <config.h>
 #include <command.h>
+#include <netdev.h>
 #include <asm/blackfin.h>
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -77,3 +78,12 @@ int board_early_init_f(void)
 
 	return 0;
 }
+
+int board_eth_init(bd_t *bis)
+{
+	int rc = 0;
+#ifdef CONFIG_SMC911X
+	rc = smc911x_initialize(0, CONFIG_SMC911X_BASE);
+#endif
+	return rc;
+}

board/freescale/mx31pdk/mx31pdk.c

@@ -25,6 +25,7 @@
 
 
 #include <common.h>
+#include <netdev.h>
 #include <asm/arch/mx31.h>
 #include <asm/arch/mx31-regs.h>
 
@@ -61,3 +62,12 @@ int checkboard(void)
 	printf("Board: i.MX31 MAX PDK (3DS)\n");
 	return 0;
 }
+
+int board_eth_init(bd_t *bis)
+{
+	int rc = 0;
+#ifdef CONFIG_SMC911X
+	rc = smc911x_initialize(0, CONFIG_SMC911X_BASE);
+#endif
+	return rc;
+}

board/imx31_litekit/imx31_litekit.c

@@ -23,6 +23,7 @@
 
 
 #include <common.h>
+#include <netdev.h>
 #include <asm/arch/mx31.h>
 #include <asm/arch/mx31-regs.h>
 
@@ -75,3 +76,12 @@ int checkboard (void)
 	printf("Board: i.MX31 Litekit\n");
 	return 0;
 }
+
+int board_eth_init(bd_t *bis)
+{
+	int rc = 0;
+#ifdef CONFIG_SMC911X
+	rc = smc911x_initialize(0, CONFIG_SMC911X_BASE);
+#endif
+	return rc;
+}

board/imx31_phycore/imx31_phycore.c

@@ -24,6 +24,7 @@
 
 #include <common.h>
 #include <s6e63d6.h>
+#include <netdev.h>
 #include <asm/arch/mx31.h>
 #include <asm/arch/mx31-regs.h>
 
@@ -128,3 +129,12 @@ int checkboard (void)
 	printf("Board: Phytec phyCore i.MX31\n");
 	return 0;
 }
+
+int board_eth_init(bd_t *bis)
+{
+	int rc = 0;
+#ifdef CONFIG_SMC911X
+	rc = smc911x_initialize(0, CONFIG_SMC911X_BASE);
+#endif
+	return rc;
+}

board/micronas/vct/ebi_smc911x.c

@@ -18,6 +18,7 @@
  */
 
 #include <common.h>
+#include <netdev.h>
 #include <asm/io.h>
 #include "vct.h"
 
@@ -45,10 +46,11 @@ int ebi_init_smc911x(void)
  * Accessor functions replacing the "weak" functions in
  * drivers/net/smc911x.c
  */
-u32 smc911x_reg_read(u32 addr)
+u32 smc911x_reg_read(struct eth_device *dev, u32 addr)
 {
 	volatile u32 data;
 
+	addr += dev->iobase;
 	reg_write(EBI_DEV1_CONFIG2(EBI_BASE), 0x0000004F);
 	ebi_wait();
 	reg_write(EBI_CPU_IO_ACCS(EBI_BASE), (EXT_DEVICE_CHANNEL_1 | addr));
@@ -58,8 +60,9 @@ u32 smc911x_reg_read(u32 addr)
 	return (data);
 }
 
-void smc911x_reg_write(u32 addr, u32 data)
+void smc911x_reg_write(struct eth_device *dev, u32 addr, u32 data)
 {
+	addr += dev->iobase;
 	reg_write(EBI_DEV1_CONFIG2(EBI_BASE), 0x0000004F);
 	ebi_wait();
 	reg_write(EBI_IO_ACCS_DATA(EBI_BASE), data);
@@ -68,8 +71,9 @@ void smc911x_reg_write(u32 addr, u32 data)
 	ebi_wait();
 }
 
-void pkt_data_push(u32 addr, u32 data)
+void pkt_data_push(struct eth_device *dev, u32 addr, u32 data)
 {
+	addr += dev->iobase;
 	reg_write(EBI_DEV1_CONFIG2(EBI_BASE), 0x0000004A);
 	ebi_wait();
 	reg_write(EBI_IO_ACCS_DATA(EBI_BASE), data);
@@ -80,10 +84,11 @@ void pkt_data_push(u32 addr, u32 data)
 	return;
 }
 
-u32 pkt_data_pull(u32 addr)
+u32 pkt_data_pull(struct eth_device *dev, u32 addr)
 {
 	volatile u32 data;
 
+	addr += dev->iobase;
 	reg_write(EBI_DEV1_CONFIG2(EBI_BASE), 0x0000004A);
 	ebi_wait();
 	reg_write(EBI_CPU_IO_ACCS(EBI_BASE), (EXT_DEVICE_CHANNEL_1 | addr));
@@ -92,3 +97,12 @@ u32 pkt_data_pull(u32 addr)
 
 	return data;
 }
+
+int board_eth_init(bd_t *bis)
+{
+	int rc = 0;
+#ifdef CONFIG_SMC911X
+	rc = smc911x_initialize(0, CONFIG_DRIVER_SMC911X_BASE);
+#endif
+	return rc;
+}

board/micronas/vct/vct.c

@@ -21,6 +21,7 @@
 
 #include <common.h>
 #include <command.h>
+#include <netdev.h>
 #include <asm/mipsregs.h>
 #include "vct.h"
 
@@ -115,3 +116,12 @@ int checkboard(void)
 
 	return 0;
 }
+
+int board_eth_init(bd_t *bis)
+{
+	int rc = 0;
+#ifdef CONFIG_SMC911X
+	rc = smc911x_initialize(0, CONFIG_SMC911X_BASE);
+#endif
+	return rc;
+}

board/omap3/evm/evm.c

@@ -28,6 +28,7 @@
  * MA 02111-1307 USA
  */
 #include <common.h>
+#include <netdev.h>
 #include <asm/io.h>
 #include <asm/arch/mem.h>
 #include <asm/arch/mux.h>
@@ -122,3 +123,12 @@ static void setup_net_chip(void)
 	udelay(1);
 	writel(GPIO0, &gpio3_base->setdataout);
 }
+
+int board_eth_init(bd_t *bis)
+{
+	int rc = 0;
+#ifdef CONFIG_SMC911X
+	rc = smc911x_initialize(0, CONFIG_SMC911X_BASE);
+#endif
+	return rc;
+}

board/renesas/ap325rxa/ap325rxa.c

@@ -19,6 +19,7 @@
  */
 
 #include <common.h>
+#include <netdev.h>
 #include <asm/io.h>
 #include <asm/processor.h>
 
@@ -160,3 +161,12 @@ void ide_set_reset(int idereset)
 	udelay(FPGA_NAND_RST_WAIT);
 	outw(FPGA_NAND_INIT, FPGA_NAND_CTL);
 }
+
+int board_eth_init(bd_t *bis)
+{
+	int rc = 0;
+#ifdef CONFIG_SMC911X
+	rc = smc911x_initialize(0, CONFIG_SMC911X_BASE);
+#endif
+	return rc;
+}

board/renesas/rsk7203/rsk7203.c

@@ -21,6 +21,7 @@
  */
 
 #include <common.h>
+#include <netdev.h>
 #include <asm/io.h>
 #include <asm/processor.h>
 
@@ -57,15 +58,25 @@ void led_set_state(unsigned short value)
  * And this has problem by FIFO access only. pkt_data_pull/pkt_data_push
  * functions necessary to solve this problem.
  */
-u32 pkt_data_pull(u32 addr)
+u32 pkt_data_pull(struct eth_device *dev, u32 addr)
 {
-	volatile u16 *addr_16 = (u16 *)addr;
+	volatile u16 *addr_16 = (u16 *)(dev->iobase + addr);
 	return (u32)((swab16(*addr_16) << 16) & 0xFFFF0000)\
 				| swab16(*(addr_16 + 1));
 }
 
-void pkt_data_push(u32 addr, u32 val)
+void pkt_data_push(struct eth_device *dev, u32 addr, u32 val)
 {
+	addr += dev->iobase;
 	*(volatile u16 *)(addr + 2) = swab16((u16)val);
 	*(volatile u16 *)(addr) = swab16((u16)(val >> 16));
 }
+
+int board_eth_init(bd_t *bis)
+{
+	int rc = 0;
+#ifdef CONFIG_SMC911X
+	rc = smc911x_initialize(0, CONFIG_SMC911X_BASE);
+#endif
+	return rc;
+}

drivers/net/Makefile

@@ -63,7 +63,7 @@ COBJS-$(CONFIG_RTL8169) += rtl8169.o
 COBJS-$(CONFIG_DRIVER_S3C4510_ETH) += s3c4510b_eth.o
 COBJS-$(CONFIG_SH_ETHER) += sh_eth.o
 COBJS-$(CONFIG_DRIVER_SMC91111) += smc91111.o
-COBJS-$(CONFIG_DRIVER_SMC911X) += smc911x.o
+COBJS-$(CONFIG_SMC911X) += smc911x.o
 COBJS-$(CONFIG_TIGON3) += tigon3.o bcm570x_autoneg.o 5701rls.o
 COBJS-$(CONFIG_DRIVER_TI_EMAC) += davinci_emac.o
 COBJS-$(CONFIG_TSEC_ENET) += tsec.o

drivers/net/smc911x.c

@@ -24,110 +24,90 @@
 
 #include <common.h>
 #include <command.h>
+#include <malloc.h>
 #include <net.h>
 #include <miiphy.h>
 
 #include "smc911x.h"
 
-u32 pkt_data_pull(u32 addr) \
+u32 pkt_data_pull(struct eth_device *dev, u32 addr) \
 	__attribute__ ((weak, alias ("smc911x_reg_read")));
-void pkt_data_push(u32 addr, u32 val) \
+void pkt_data_push(struct eth_device *dev, u32 addr, u32 val) \
 	__attribute__ ((weak, alias ("smc911x_reg_write")));
 
 #define mdelay(n)       udelay((n)*1000)
 
-static int smx911x_handle_mac_address(bd_t *bd)
+static void smx911x_handle_mac_address(struct eth_device *dev)
 {
 	unsigned long addrh, addrl;
-	uchar m[6];
-
-	if (eth_getenv_enetaddr("ethaddr", m)) {
-		/* if the environment has a valid mac address then use it */
-		addrl = m[0] | (m[1] << 8) | (m[2] << 16) | (m[3] << 24);
-		addrh = m[4] | (m[5] << 8);
-		smc911x_set_mac_csr(ADDRL, addrl);
-		smc911x_set_mac_csr(ADDRH, addrh);
-	} else {
-		/* if not, try to get one from the eeprom */
-		addrh = smc911x_get_mac_csr(ADDRH);
-		addrl = smc911x_get_mac_csr(ADDRL);
-
-		m[0] = (addrl       ) & 0xff;
-		m[1] = (addrl >>  8 ) & 0xff;
-		m[2] = (addrl >> 16 ) & 0xff;
-		m[3] = (addrl >> 24 ) & 0xff;
-		m[4] = (addrh       ) & 0xff;
-		m[5] = (addrh >>  8 ) & 0xff;
-
-		/* we get 0xff when there is no eeprom connected */
-		if ((m[0] & m[1] & m[2] & m[3] & m[4] & m[5]) == 0xff) {
-			printf(DRIVERNAME ": no valid mac address in environment "
-				"and no eeprom found\n");
-			return -1;
-		}
-
-		eth_setenv_enetaddr("ethaddr", m);
-	}
+	uchar *m = dev->enetaddr;
 
-	printf(DRIVERNAME ": MAC %pM\n", m);
+	addrl = m[0] | (m[1] << 8) | (m[2] << 16) | (m[3] << 24);
+	addrh = m[4] | (m[5] << 8);
+	smc911x_set_mac_csr(dev, ADDRL, addrl);
+	smc911x_set_mac_csr(dev, ADDRH, addrh);
 
-	return 0;
+	printf(DRIVERNAME ": MAC %pM\n", m);
 }
 
-static int smc911x_miiphy_read(u8 phy, u8 reg, u16 *val)
+static int smc911x_miiphy_read(struct eth_device *dev,
+				u8 phy, u8 reg, u16 *val)
 {
-	while (smc911x_get_mac_csr(MII_ACC) & MII_ACC_MII_BUSY)
+	while (smc911x_get_mac_csr(dev, MII_ACC) & MII_ACC_MII_BUSY)
 		;
 
-	smc911x_set_mac_csr(MII_ACC, phy << 11 | reg << 6 | MII_ACC_MII_BUSY);
+	smc911x_set_mac_csr(dev, MII_ACC, phy << 11 | reg << 6 |
+				MII_ACC_MII_BUSY);
 
-	while (smc911x_get_mac_csr(MII_ACC) & MII_ACC_MII_BUSY)
+	while (smc911x_get_mac_csr(dev, MII_ACC) & MII_ACC_MII_BUSY)
 		;
 
-	*val = smc911x_get_mac_csr(MII_DATA);
+	*val = smc911x_get_mac_csr(dev, MII_DATA);
 
 	return 0;
 }
 
-static int smc911x_miiphy_write(u8 phy, u8 reg, u16  val)
+static int smc911x_miiphy_write(struct eth_device *dev,
+				u8 phy, u8 reg, u16  val)
 {
-	while (smc911x_get_mac_csr(MII_ACC) & MII_ACC_MII_BUSY)
+	while (smc911x_get_mac_csr(dev, MII_ACC) & MII_ACC_MII_BUSY)
 		;
 
-	smc911x_set_mac_csr(MII_DATA, val);
-	smc911x_set_mac_csr(MII_ACC,
+	smc911x_set_mac_csr(dev, MII_DATA, val);
+	smc911x_set_mac_csr(dev, MII_ACC,
 		phy << 11 | reg << 6 | MII_ACC_MII_BUSY | MII_ACC_MII_WRITE);
 
-	while (smc911x_get_mac_csr(MII_ACC) & MII_ACC_MII_BUSY)
+	while (smc911x_get_mac_csr(dev, MII_ACC) & MII_ACC_MII_BUSY)
 		;
 	return 0;
 }
 
-static int smc911x_phy_reset(void)
+static int smc911x_phy_reset(struct eth_device *dev)
 {
 	u32 reg;
 
-	reg = smc911x_reg_read(PMT_CTRL);
+	reg = smc911x_reg_read(dev, PMT_CTRL);
 	reg &= ~0xfffff030;
 	reg |= PMT_CTRL_PHY_RST;
-	smc911x_reg_write(PMT_CTRL, reg);
+	smc911x_reg_write(dev, PMT_CTRL, reg);
 
 	mdelay(100);
 
 	return 0;
 }
 
-static void smc911x_phy_configure(void)
+static void smc911x_phy_configure(struct eth_device *dev)
 {
 	int timeout;
 	u16 status;
 
-	smc911x_phy_reset();
+	smc911x_phy_reset(dev);
 
-	smc911x_miiphy_write(1, PHY_BMCR, PHY_BMCR_RESET);
+	smc911x_miiphy_write(dev, 1, PHY_BMCR, PHY_BMCR_RESET);
 	mdelay(1);
-	smc911x_miiphy_write(1, PHY_ANAR, 0x01e1);
-	smc911x_miiphy_write(1, PHY_BMCR, PHY_BMCR_AUTON | PHY_BMCR_RST_NEG);
+	smc911x_miiphy_write(dev, 1, PHY_ANAR, 0x01e1);
+	smc911x_miiphy_write(dev, 1, PHY_BMCR, PHY_BMCR_AUTON |
+				PHY_BMCR_RST_NEG);
 
 	timeout = 5000;
 	do {
@@ -135,7 +115,7 @@ static void smc911x_phy_configure(void)
 		if ((timeout--) == 0)
 			goto err_out;
 
-		if (smc911x_miiphy_read(1, PHY_BMSR, &status) != 0)
+		if (smc911x_miiphy_read(dev, 1, PHY_BMSR, &status) != 0)
 			goto err_out;
 	} while (!(status & PHY_BMSR_LS));
 
@@ -147,39 +127,39 @@ err_out:
 	printf(DRIVERNAME ": autonegotiation timed out\n");
 }
 
-static void smc911x_enable(void)
+static void smc911x_enable(struct eth_device *dev)
 {
 	/* Enable TX */
-	smc911x_reg_write(HW_CFG, 8 << 16 | HW_CFG_SF);
+	smc911x_reg_write(dev, HW_CFG, 8 << 16 | HW_CFG_SF);
 
-	smc911x_reg_write(GPT_CFG, GPT_CFG_TIMER_EN | 10000);
+	smc911x_reg_write(dev, GPT_CFG, GPT_CFG_TIMER_EN | 10000);
 
-	smc911x_reg_write(TX_CFG, TX_CFG_TX_ON);
+	smc911x_reg_write(dev, TX_CFG, TX_CFG_TX_ON);
 
 	/* no padding to start of packets */
-	smc911x_reg_write(RX_CFG, 0);
+	smc911x_reg_write(dev, RX_CFG, 0);
 
-	smc911x_set_mac_csr(MAC_CR, MAC_CR_TXEN | MAC_CR_RXEN | MAC_CR_HBDIS);
+	smc911x_set_mac_csr(dev, MAC_CR, MAC_CR_TXEN | MAC_CR_RXEN |
+				MAC_CR_HBDIS);
 
 }
 
-int eth_init(bd_t *bd)
+static int smc911x_init(struct eth_device *dev, bd_t * bd)
 {
 	printf(DRIVERNAME ": initializing\n");
 
-	if (smc911x_detect_chip())
+	if (smc911x_detect_chip(dev))
 		goto err_out;
 
-	smc911x_reset();
+	smc911x_reset(dev);
 
 	/* Configure the PHY, initialize the link state */
-	smc911x_phy_configure();
+	smc911x_phy_configure(dev);
 
-	if (smx911x_handle_mac_address(bd))
-		goto err_out;
+	smx911x_handle_mac_address(dev);
 
 	/* Turn on Tx + Rx */
-	smc911x_enable();
+	smc911x_enable(dev);
 
 	return 0;
 
@@ -187,28 +167,32 @@ err_out:
 	return -1;
 }
 
-int eth_send(volatile void *packet, int length)
+static int smc911x_send(struct eth_device *dev,
+			volatile void *packet, int length)
 {
 	u32 *data = (u32*)packet;
 	u32 tmplen;
 	u32 status;
 
-	smc911x_reg_write(TX_DATA_FIFO, TX_CMD_A_INT_FIRST_SEG | TX_CMD_A_INT_LAST_SEG | length);
-	smc911x_reg_write(TX_DATA_FIFO, length);
+	smc911x_reg_write(dev, TX_DATA_FIFO, TX_CMD_A_INT_FIRST_SEG |
+				TX_CMD_A_INT_LAST_SEG | length);
+	smc911x_reg_write(dev, TX_DATA_FIFO, length);
 
 	tmplen = (length + 3) / 4;
 
 	while (tmplen--)
-		pkt_data_push(TX_DATA_FIFO, *data++);
+		pkt_data_push(dev, TX_DATA_FIFO, *data++);
 
 	/* wait for transmission */
-	while (!((smc911x_reg_read(TX_FIFO_INF) & TX_FIFO_INF_TSUSED) >> 16));
+	while (!((smc911x_reg_read(dev, TX_FIFO_INF) &
+					TX_FIFO_INF_TSUSED) >> 16));
 
 	/* get status. Ignore 'no carrier' error, it has no meaning for
 	 * full duplex operation
 	 */
-	status = smc911x_reg_read(TX_STATUS_FIFO) & (TX_STS_LOC | TX_STS_LATE_COLL |
-		TX_STS_MANY_COLL | TX_STS_MANY_DEFER | TX_STS_UNDERRUN);
+	status = smc911x_reg_read(dev, TX_STATUS_FIFO) &
+			(TX_STS_LOC | TX_STS_LATE_COLL | TX_STS_MANY_COLL |
+			TX_STS_MANY_DEFER | TX_STS_UNDERRUN);
 
 	if (!status)
 		return 0;
@@ -223,26 +207,26 @@ int eth_send(volatile void *packet, int length)
 	return -1;
 }
 
-void eth_halt(void)
+static void smc911x_halt(struct eth_device *dev)
 {
-	smc911x_reset();
+	smc911x_reset(dev);
 }
 
-int eth_rx(void)
+static int smc911x_rx(struct eth_device *dev)
 {
 	u32 *data = (u32 *)NetRxPackets[0];
 	u32 pktlen, tmplen;
 	u32 status;
 
-	if ((smc911x_reg_read(RX_FIFO_INF) & RX_FIFO_INF_RXSUSED) >> 16) {
-		status = smc911x_reg_read(RX_STATUS_FIFO);
+	if ((smc911x_reg_read(dev, RX_FIFO_INF) & RX_FIFO_INF_RXSUSED) >> 16) {
+		status = smc911x_reg_read(dev, RX_STATUS_FIFO);
 		pktlen = (status & RX_STS_PKT_LEN) >> 16;
 
-		smc911x_reg_write(RX_CFG, 0);
+		smc911x_reg_write(dev, RX_CFG, 0);
 
 		tmplen = (pktlen + 2+ 3) / 4;
 		while (tmplen--)
-			*data++ = pkt_data_pull(RX_DATA_FIFO);
+			*data++ = pkt_data_pull(dev, RX_DATA_FIFO);
 
 		if (status & RX_STS_ES)
 			printf(DRIVERNAME
@@ -254,3 +238,36 @@ int eth_rx(void)
 
 	return 0;
 }
+
+int smc911x_initialize(u8 dev_num, int base_addr)
+{
+	unsigned long addrl, addrh;
+	struct eth_device *dev;
+
+	dev = malloc(sizeof(*dev));
+	if (!dev) {
+		free(dev);
+		return 0;
+	}
+	memset(dev, 0, sizeof(*dev));
+
+	dev->iobase = base_addr;
+
+	addrh = smc911x_get_mac_csr(dev, ADDRH);
+	addrl = smc911x_get_mac_csr(dev, ADDRL);
+	dev->enetaddr[0] = addrl;
+	dev->enetaddr[1] = addrl >>  8;
+	dev->enetaddr[2] = addrl >> 16;
+	dev->enetaddr[3] = addrl >> 24;
+	dev->enetaddr[4] = addrh;
+	dev->enetaddr[5] = addrh >> 8;
+
+	dev->init = smc911x_init;
+	dev->halt = smc911x_halt;
+	dev->send = smc911x_send;
+	dev->recv = smc911x_rx;
+	sprintf(dev->name, "%s-%hu", DRIVERNAME, dev_num);
+
+	eth_register(dev);
+	return 0;
+}

drivers/net/smc911x.h

@@ -27,45 +27,51 @@
 
 #include <linux/types.h>
 
-#if defined (CONFIG_DRIVER_SMC911X_32_BIT) && \
-	defined (CONFIG_DRIVER_SMC911X_16_BIT)
-#error "SMC911X: Only one of CONFIG_DRIVER_SMC911X_32_BIT and \
-	CONFIG_DRIVER_SMC911X_16_BIT shall be set"
+#define DRIVERNAME "smc911x"
+
+#if defined (CONFIG_SMC911X_32_BIT) && \
+	defined (CONFIG_SMC911X_16_BIT)
+#error "SMC911X: Only one of CONFIG_SMC911X_32_BIT and \
+	CONFIG_SMC911X_16_BIT shall be set"
 #endif
 
-#if defined (CONFIG_DRIVER_SMC911X_32_BIT)
-static inline u32 __smc911x_reg_read(u32 addr)
+#if defined (CONFIG_SMC911X_32_BIT)
+static inline u32 __smc911x_reg_read(struct eth_device *dev, u32 offset)
 {
-	return *(volatile u32*)addr;
+	return *(volatile u32*)(dev->iobase + offset);
 }
-u32 smc911x_reg_read(u32 addr) __attribute__((weak, alias("__smc911x_reg_read")));
+u32 smc911x_reg_read(struct eth_device *dev, u32 offset)
+	__attribute__((weak, alias("__smc911x_reg_read")));
 
-static inline void __smc911x_reg_write(u32 addr, u32 val)
+static inline void __smc911x_reg_write(struct eth_device *dev,
+					u32 offset, u32 val)
 {
-	*(volatile u32*)addr = val;
+	*(volatile u32*)(dev->iobase + offset) = val;
 }
-void smc911x_reg_write(u32 addr, u32 val) __attribute__((weak, alias("__smc911x_reg_write")));
-#elif defined (CONFIG_DRIVER_SMC911X_16_BIT)
-static inline u32 smc911x_reg_read(u32 addr)
+void smc911x_reg_write(struct eth_device *dev, u32 offset, u32 val)
+	__attribute__((weak, alias("__smc911x_reg_write")));
+#elif defined (CONFIG_SMC911X_16_BIT)
+static inline u32 smc911x_reg_read(struct eth_device *dev, u32 offset)
 {
-	volatile u16 *addr_16 = (u16 *)addr;
+	volatile u16 *addr_16 = (u16 *)(dev->iobase + offset);
 	return ((*addr_16 & 0x0000ffff) | (*(addr_16 + 1) << 16));
 }
-static inline void smc911x_reg_write(u32 addr, u32 val)
+static inline void smc911x_reg_write(struct eth_device *dev,
+					u32 offset, u32 val)
 {
-	*(volatile u16*)addr = (u16)val;
-	*(volatile u16*)(addr + 2) = (u16)(val >> 16);
+	*(volatile u16 *)(dev->iobase + offset) = (u16)val;
+	*(volatile u16 *)(dev->iobase + offset + 2) = (u16)(val >> 16);
 }
 #else
 #error "SMC911X: undefined bus width"
-#endif /* CONFIG_DRIVER_SMC911X_16_BIT */
+#endif /* CONFIG_SMC911X_16_BIT */
 
 /* Below are the register offsets and bit definitions
  * of the Lan911x memory space
  */
-#define RX_DATA_FIFO		 (CONFIG_DRIVER_SMC911X_BASE + 0x00)
+#define RX_DATA_FIFO		 		0x00
 
-#define TX_DATA_FIFO		 (CONFIG_DRIVER_SMC911X_BASE + 0x20)
+#define TX_DATA_FIFO		 		0x20
 #define	TX_CMD_A_INT_ON_COMP			0x80000000
 #define	TX_CMD_A_INT_BUF_END_ALGN		0x03000000
 #define	TX_CMD_A_INT_4_BYTE_ALGN		0x00000000
@@ -80,7 +86,7 @@ static inline void smc911x_reg_write(u32 addr, u32 val)
 #define	TX_CMD_B_DISABLE_PADDING		0x00001000
 #define	TX_CMD_B_PKT_BYTE_LENGTH		0x000007FF
 
-#define RX_STATUS_FIFO		(CONFIG_DRIVER_SMC911X_BASE + 0x40)
+#define RX_STATUS_FIFO				0x40
 #define	RX_STS_PKT_LEN				0x3FFF0000
 #define	RX_STS_ES				0x00008000
 #define	RX_STS_BCST				0x00002000
@@ -94,8 +100,8 @@ static inline void smc911x_reg_write(u32 addr, u32 val)
 #define	RX_STS_MII_ERR				0x00000008
 #define	RX_STS_DRIBBLING			0x00000004
 #define	RX_STS_CRC_ERR				0x00000002
-#define RX_STATUS_FIFO_PEEK	(CONFIG_DRIVER_SMC911X_BASE + 0x44)
-#define TX_STATUS_FIFO		(CONFIG_DRIVER_SMC911X_BASE + 0x48)
+#define RX_STATUS_FIFO_PEEK			0x44
+#define TX_STATUS_FIFO				0x48
 #define	TX_STS_TAG				0xFFFF0000
 #define	TX_STS_ES				0x00008000
 #define	TX_STS_LOC				0x00000800
@@ -106,21 +112,23 @@ static inline void smc911x_reg_write(u32 addr, u32 val)
 #define	TX_STS_MANY_DEFER			0x00000004
 #define	TX_STS_UNDERRUN				0x00000002
 #define	TX_STS_DEFERRED				0x00000001
-#define TX_STATUS_FIFO_PEEK	(CONFIG_DRIVER_SMC911X_BASE + 0x4C)
-#define ID_REV			(CONFIG_DRIVER_SMC911X_BASE + 0x50)
+#define TX_STATUS_FIFO_PEEK			0x4C
+#define ID_REV					0x50
 #define	ID_REV_CHIP_ID				0xFFFF0000  /* RO */
 #define	ID_REV_REV_ID				0x0000FFFF  /* RO */
 
-#define INT_CFG			(CONFIG_DRIVER_SMC911X_BASE + 0x54)
+#define INT_CFG					0x54
 #define	INT_CFG_INT_DEAS			0xFF000000  /* R/W */
 #define	INT_CFG_INT_DEAS_CLR			0x00004000
 #define	INT_CFG_INT_DEAS_STS			0x00002000
 #define	INT_CFG_IRQ_INT				0x00001000  /* RO */
 #define	INT_CFG_IRQ_EN				0x00000100  /* R/W */
-#define	INT_CFG_IRQ_POL				0x00000010  /* R/W Not Affected by SW Reset */
-#define	INT_CFG_IRQ_TYPE			0x00000001  /* R/W Not Affected by SW Reset */
+					/* R/W Not Affected by SW Reset */
+#define	INT_CFG_IRQ_POL				0x00000010
+					/* R/W Not Affected by SW Reset */
+#define	INT_CFG_IRQ_TYPE			0x00000001
 
-#define INT_STS			(CONFIG_DRIVER_SMC911X_BASE + 0x58)
+#define INT_STS					0x58
 #define	INT_STS_SW_INT				0x80000000  /* R/WC */
 #define	INT_STS_TXSTOP_INT			0x02000000  /* R/WC */
 #define	INT_STS_RXSTOP_INT			0x01000000  /* R/WC */
@@ -149,7 +157,7 @@ static inline void smc911x_reg_write(u32 addr, u32 val)
 #define	INT_STS_GPIO2_INT			0x00000004  /* R/WC */
 #define	INT_STS_GPIO1_INT			0x00000002  /* R/WC */
 #define	INT_STS_GPIO0_INT			0x00000001  /* R/WC */
-#define INT_EN			(CONFIG_DRIVER_SMC911X_BASE + 0x5C)
+#define INT_EN					0x5C
 #define	INT_EN_SW_INT_EN			0x80000000  /* R/W */
 #define	INT_EN_TXSTOP_INT_EN			0x02000000  /* R/W */
 #define	INT_EN_RXSTOP_INT_EN			0x01000000  /* R/W */
@@ -179,14 +187,14 @@ static inline void smc911x_reg_write(u32 addr, u32 val)
 #define	INT_EN_GPIO1_INT			0x00000002  /* R/W */
 #define	INT_EN_GPIO0_INT			0x00000001  /* R/W */
 
-#define BYTE_TEST		(CONFIG_DRIVER_SMC911X_BASE + 0x64)
-#define FIFO_INT		(CONFIG_DRIVER_SMC911X_BASE + 0x68)
+#define BYTE_TEST				0x64
+#define FIFO_INT				0x68
 #define	FIFO_INT_TX_AVAIL_LEVEL			0xFF000000  /* R/W */
 #define	FIFO_INT_TX_STS_LEVEL			0x00FF0000  /* R/W */
 #define	FIFO_INT_RX_AVAIL_LEVEL			0x0000FF00  /* R/W */
 #define	FIFO_INT_RX_STS_LEVEL			0x000000FF  /* R/W */
 
-#define RX_CFG			(CONFIG_DRIVER_SMC911X_BASE + 0x6C)
+#define RX_CFG					0x6C
 #define	RX_CFG_RX_END_ALGN			0xC0000000  /* R/W */
 #define		RX_CFG_RX_END_ALGN4		0x00000000  /* R/W */
 #define		RX_CFG_RX_END_ALGN16		0x40000000  /* R/W */
@@ -196,16 +204,17 @@ static inline void smc911x_reg_write(u32 addr, u32 val)
 #define	RX_CFG_RXDOFF				0x00001F00  /* R/W */
 /*#define	RX_CFG_RXBAD			0x00000001*/  /* R/W */
 
-#define TX_CFG			(CONFIG_DRIVER_SMC911X_BASE + 0x70)
+#define TX_CFG					0x70
 /*#define	TX_CFG_TX_DMA_LVL		0xE0000000*/	 /* R/W */
-/*#define	TX_CFG_TX_DMA_CNT		0x0FFF0000*/	 /* R/W Self Clearing */
+						 /* R/W Self Clearing */
+/*#define	TX_CFG_TX_DMA_CNT		0x0FFF0000*/
 #define	TX_CFG_TXS_DUMP				0x00008000  /* Self Clearing */
 #define	TX_CFG_TXD_DUMP				0x00004000  /* Self Clearing */
 #define	TX_CFG_TXSAO				0x00000004  /* R/W */
 #define	TX_CFG_TX_ON				0x00000002  /* R/W */
 #define	TX_CFG_STOP_TX				0x00000001  /* Self Clearing */
 
-#define HW_CFG			(CONFIG_DRIVER_SMC911X_BASE + 0x74)
+#define HW_CFG					0x74
 #define	HW_CFG_TTM				0x00200000  /* R/W */
 #define	HW_CFG_SF				0x00100000  /* R/W */
 #define	HW_CFG_TX_FIF_SZ			0x000F0000  /* R/W */
@@ -221,24 +230,25 @@ static inline void smc911x_reg_write(u32 addr, u32 val)
 #define	HW_CFG_SRST_TO				0x00000002  /* RO */
 #define	HW_CFG_SRST				0x00000001  /* Self Clearing */
 
-#define RX_DP_CTRL		(CONFIG_DRIVER_SMC911X_BASE + 0x78)
+#define RX_DP_CTRL				0x78
 #define	RX_DP_CTRL_RX_FFWD			0x80000000  /* R/W */
 #define	RX_DP_CTRL_FFWD_BUSY			0x80000000  /* RO */
 
-#define RX_FIFO_INF		(CONFIG_DRIVER_SMC911X_BASE + 0x7C)
+#define RX_FIFO_INF				0x7C
 #define	 RX_FIFO_INF_RXSUSED			0x00FF0000  /* RO */
 #define	 RX_FIFO_INF_RXDUSED			0x0000FFFF  /* RO */
 
-#define TX_FIFO_INF		(CONFIG_DRIVER_SMC911X_BASE + 0x80)
+#define TX_FIFO_INF				0x80
 #define	TX_FIFO_INF_TSUSED			0x00FF0000  /* RO */
 #define	TX_FIFO_INF_TDFREE			0x0000FFFF  /* RO */
 
-#define PMT_CTRL		(CONFIG_DRIVER_SMC911X_BASE + 0x84)
+#define PMT_CTRL				0x84
 #define	PMT_CTRL_PM_MODE			0x00003000  /* Self Clearing */
 #define	PMT_CTRL_PHY_RST			0x00000400  /* Self Clearing */
 #define	PMT_CTRL_WOL_EN				0x00000200  /* R/W */
 #define	PMT_CTRL_ED_EN				0x00000100  /* R/W */
-#define	PMT_CTRL_PME_TYPE			0x00000040  /* R/W Not Affected by SW Reset */
+					/* R/W Not Affected by SW Reset */
+#define	PMT_CTRL_PME_TYPE			0x00000040
 #define	PMT_CTRL_WUPS				0x00000030  /* R/WC */
 #define	PMT_CTRL_WUPS_NOWAKE			0x00000000  /* R/WC */
 #define	PMT_CTRL_WUPS_ED			0x00000010  /* R/WC */
@@ -246,10 +256,11 @@ static inline void smc911x_reg_write(u32 addr, u32 val)
 #define	PMT_CTRL_WUPS_MULTI			0x00000030  /* R/WC */
 #define	PMT_CTRL_PME_IND			0x00000008  /* R/W */
 #define	PMT_CTRL_PME_POL			0x00000004  /* R/W */
-#define	PMT_CTRL_PME_EN				0x00000002  /* R/W Not Affected by SW Reset */
+					/* R/W Not Affected by SW Reset */
+#define	PMT_CTRL_PME_EN				0x00000002
 #define	PMT_CTRL_READY				0x00000001  /* RO */
 
-#define GPIO_CFG		(CONFIG_DRIVER_SMC911X_BASE + 0x88)
+#define GPIO_CFG				0x88
 #define	GPIO_CFG_LED3_EN			0x40000000  /* R/W */
 #define	GPIO_CFG_LED2_EN			0x20000000  /* R/W */
 #define	GPIO_CFG_LED1_EN			0x10000000  /* R/W */
@@ -269,23 +280,23 @@ static inline void smc911x_reg_write(u32 addr, u32 val)
 #define	GPIO_CFG_GPIOD1				0x00000002  /* R/W */
 #define	GPIO_CFG_GPIOD0				0x00000001  /* R/W */
 
-#define GPT_CFG			(CONFIG_DRIVER_SMC911X_BASE + 0x8C)
+#define GPT_CFG					0x8C
 #define	GPT_CFG_TIMER_EN			0x20000000  /* R/W */
 #define	GPT_CFG_GPT_LOAD			0x0000FFFF  /* R/W */
 
-#define GPT_CNT			(CONFIG_DRIVER_SMC911X_BASE + 0x90)
+#define GPT_CNT					0x90
 #define	GPT_CNT_GPT_CNT				0x0000FFFF  /* RO */
 
-#define ENDIAN			(CONFIG_DRIVER_SMC911X_BASE + 0x98)
-#define FREE_RUN		(CONFIG_DRIVER_SMC911X_BASE + 0x9C)
-#define RX_DROP			(CONFIG_DRIVER_SMC911X_BASE + 0xA0)
-#define MAC_CSR_CMD		(CONFIG_DRIVER_SMC911X_BASE + 0xA4)
+#define ENDIAN					0x98
+#define FREE_RUN				0x9C
+#define RX_DROP					0xA0
+#define MAC_CSR_CMD				0xA4
 #define	 MAC_CSR_CMD_CSR_BUSY			0x80000000  /* Self Clearing */
 #define	 MAC_CSR_CMD_R_NOT_W			0x40000000  /* R/W */
 #define	 MAC_CSR_CMD_CSR_ADDR			0x000000FF  /* R/W */
 
-#define MAC_CSR_DATA		(CONFIG_DRIVER_SMC911X_BASE + 0xA8)
-#define AFC_CFG			(CONFIG_DRIVER_SMC911X_BASE + 0xAC)
+#define MAC_CSR_DATA				0xA8
+#define AFC_CFG					0xAC
 #define		AFC_CFG_AFC_HI			0x00FF0000  /* R/W */
 #define		AFC_CFG_AFC_LO			0x0000FF00  /* R/W */
 #define		AFC_CFG_BACK_DUR		0x000000F0  /* R/W */
@@ -294,7 +305,7 @@ static inline void smc911x_reg_write(u32 addr, u32 val)
 #define		AFC_CFG_FCADD			0x00000002  /* R/W */
 #define		AFC_CFG_FCANY			0x00000001  /* R/W */
 
-#define E2P_CMD			(CONFIG_DRIVER_SMC911X_BASE + 0xB0)
+#define E2P_CMD					0xB0
 #define		E2P_CMD_EPC_BUSY		0x80000000  /* Self Clearing */
 #define		E2P_CMD_EPC_CMD			0x70000000  /* R/W */
 #define		E2P_CMD_EPC_CMD_READ		0x00000000  /* R/W */
@@ -309,7 +320,7 @@ static inline void smc911x_reg_write(u32 addr, u32 val)
 #define		E2P_CMD_MAC_ADDR_LOADED		0x00000100  /* RO */
 #define		E2P_CMD_EPC_ADDR		0x000000FF  /* R/W */
 
-#define E2P_DATA		(CONFIG_DRIVER_SMC911X_BASE + 0xB4)
+#define E2P_DATA				0xB4
 #define	E2P_DATA_EEPROM_DATA			0x000000FF  /* R/W */
 /* end of LAN register offsets and bit definitions */
 
@@ -403,41 +414,39 @@ static const struct chip_id chip_ids[] =  {
 	{ 0, NULL },
 };
 
-
-#define DRIVERNAME "smc911x"
-
-static u32 smc911x_get_mac_csr(u8 reg)
+static u32 smc911x_get_mac_csr(struct eth_device *dev, u8 reg)
 {
-	while (smc911x_reg_read(MAC_CSR_CMD) & MAC_CSR_CMD_CSR_BUSY)
+	while (smc911x_reg_read(dev, MAC_CSR_CMD) & MAC_CSR_CMD_CSR_BUSY)
 		;
-	smc911x_reg_write(MAC_CSR_CMD, MAC_CSR_CMD_CSR_BUSY | MAC_CSR_CMD_R_NOT_W | reg);
-	while (smc911x_reg_read(MAC_CSR_CMD) & MAC_CSR_CMD_CSR_BUSY)
+	smc911x_reg_write(dev, MAC_CSR_CMD,
+			MAC_CSR_CMD_CSR_BUSY | MAC_CSR_CMD_R_NOT_W | reg);
+	while (smc911x_reg_read(dev, MAC_CSR_CMD) & MAC_CSR_CMD_CSR_BUSY)
 		;
 
-	return smc911x_reg_read(MAC_CSR_DATA);
+	return smc911x_reg_read(dev, MAC_CSR_DATA);
 }
 
-static void smc911x_set_mac_csr(u8 reg, u32 data)
+static void smc911x_set_mac_csr(struct eth_device *dev, u8 reg, u32 data)
 {
-	while (smc911x_reg_read(MAC_CSR_CMD) & MAC_CSR_CMD_CSR_BUSY)
+	while (smc911x_reg_read(dev, MAC_CSR_CMD) & MAC_CSR_CMD_CSR_BUSY)
 		;
-	smc911x_reg_write(MAC_CSR_DATA, data);
-	smc911x_reg_write(MAC_CSR_CMD, MAC_CSR_CMD_CSR_BUSY | reg);
-	while (smc911x_reg_read(MAC_CSR_CMD) & MAC_CSR_CMD_CSR_BUSY)
+	smc911x_reg_write(dev, MAC_CSR_DATA, data);
+	smc911x_reg_write(dev, MAC_CSR_CMD, MAC_CSR_CMD_CSR_BUSY | reg);
+	while (smc911x_reg_read(dev, MAC_CSR_CMD) & MAC_CSR_CMD_CSR_BUSY)
 		;
 }
 
-static int smc911x_detect_chip(void)
+static int smc911x_detect_chip(struct eth_device *dev)
 {
 	unsigned long val, i;
 
-	val = smc911x_reg_read(BYTE_TEST);
+	val = smc911x_reg_read(dev, BYTE_TEST);
 	if (val != 0x87654321) {
 		printf(DRIVERNAME ": Invalid chip endian 0x%08lx\n", val);
 		return -1;
 	}
 
-	val = smc911x_reg_read(ID_REV) >> 16;
+	val = smc911x_reg_read(dev, ID_REV) >> 16;
 	for (i = 0; chip_ids[i].id != 0; i++) {
 		if (chip_ids[i].id == val) break;
 	}
@@ -451,18 +460,19 @@ static int smc911x_detect_chip(void)
 	return 0;
 }
 
-static void smc911x_reset(void)
+static void smc911x_reset(struct eth_device *dev)
 {
 	int timeout;
 
 	/* Take out of PM setting first */
-	if (smc911x_reg_read(PMT_CTRL) & PMT_CTRL_READY) {
+	if (smc911x_reg_read(dev, PMT_CTRL) & PMT_CTRL_READY) {
 		/* Write to the bytetest will take out of powerdown */
-		smc911x_reg_write(BYTE_TEST, 0x0);
+		smc911x_reg_write(dev, BYTE_TEST, 0x0);
 
 		timeout = 10;
 
-		while (timeout-- && !(smc911x_reg_read(PMT_CTRL) & PMT_CTRL_READY))
+		while (timeout-- &&
+			!(smc911x_reg_read(dev, PMT_CTRL) & PMT_CTRL_READY))
 			udelay(10);
 		if (!timeout) {
 			printf(DRIVERNAME
@@ -472,12 +482,12 @@ static void smc911x_reset(void)
 	}
 
 	/* Disable interrupts */
-	smc911x_reg_write(INT_EN, 0);
+	smc911x_reg_write(dev, INT_EN, 0);
 
-	smc911x_reg_write(HW_CFG, HW_CFG_SRST);
+	smc911x_reg_write(dev, HW_CFG, HW_CFG_SRST);
 
 	timeout = 1000;
-	while (timeout-- && smc911x_reg_read(E2P_CMD) & E2P_CMD_EPC_BUSY)
+	while (timeout-- && smc911x_reg_read(dev, E2P_CMD) & E2P_CMD_EPC_BUSY)
 		udelay(10);
 
 	if (!timeout) {
@@ -486,11 +496,11 @@ static void smc911x_reset(void)
 	}
 
 	/* Reset the FIFO level and flow control settings */
-	smc911x_set_mac_csr(FLOW, FLOW_FCPT | FLOW_FCEN);
-	smc911x_reg_write(AFC_CFG, 0x0050287F);
+	smc911x_set_mac_csr(dev, FLOW, FLOW_FCPT | FLOW_FCEN);
+	smc911x_reg_write(dev, AFC_CFG, 0x0050287F);
 
 	/* Set to LED outputs */
-	smc911x_reg_write(GPIO_CFG, 0x70070000);
+	smc911x_reg_write(dev, GPIO_CFG, 0x70070000);
 }
 
 #endif

include/configs/ap325rxa.h

@@ -53,9 +53,10 @@
 #undef  CONFIG_SHOW_BOOT_PROGRESS
 
 /* SMC9118 */
-#define CONFIG_DRIVER_SMC911X 1
-#define CONFIG_DRIVER_SMC911X_32_BIT 1
-#define CONFIG_DRIVER_SMC911X_BASE 0xB6080000
+#define CONFIG_NET_MULTI
+#define CONFIG_SMC911X 1
+#define CONFIG_SMC911X_32_BIT 1
+#define CONFIG_SMC911X_BASE 0xB6080000
 
 /* MEMORY */
 #define AP325RXA_SDRAM_BASE		(0x88000000)

include/configs/bf548-ezkit.h

@@ -69,9 +69,10 @@
  * Network Settings
  */
 #define ADI_CMDS_NETWORK	1
-#define CONFIG_DRIVER_SMC911X	1
-#define CONFIG_DRIVER_SMC911X_BASE	0x24000000
-#define CONFIG_DRIVER_SMC911X_16_BIT
+#define CONFIG_NET_MULTI
+#define CONFIG_SMC911X	1
+#define CONFIG_SMC911X_BASE	0x24000000
+#define CONFIG_SMC911X_16_BIT
 #define CONFIG_HOSTNAME		bf548-ezkit
 /* Uncomment next line to use fixed MAC address */
 /* #define CONFIG_ETHADDR	02:80:ad:20:31:e8 */

include/configs/cm-bf548.h

@@ -69,9 +69,10 @@
  * Network Settings
  */
 #define ADI_CMDS_NETWORK	1
-#define CONFIG_DRIVER_SMC911X	1
-#define CONFIG_DRIVER_SMC911X_BASE	0x24000000
-#define CONFIG_DRIVER_SMC911X_16_BIT
+#define CONFIG_NET_MULTI
+#define CONFIG_SMC911X	1
+#define CONFIG_SMC911X_BASE	0x24000000
+#define CONFIG_SMC911X_16_BIT
 #define CONFIG_HOSTNAME		cm-bf548
 /* Uncomment next line to use fixed MAC address */
 /* #define CONFIG_ETHADDR	02:80:ad:24:31:91 */

include/configs/imx31_litekit.h

@@ -104,9 +104,10 @@
 	"prg_uboot=tftpboot 0x80000000 u-boot-imx31_litekit.bin; protect off all; erase 0xa00d0000 0xa01effff; cp.b 0x80000000 0xa00d0000 $(filesize)\0"
 
 
-#define CONFIG_DRIVER_SMC911X		1
-#define CONFIG_DRIVER_SMC911X_BASE	(CS4_BASE + 0x00020000)
-#define CONFIG_DRIVER_SMC911X_32_BIT	1
+#define CONFIG_NET_MULTI
+#define CONFIG_SMC911X		1
+#define CONFIG_SMC911X_BASE	(CS4_BASE + 0x00020000)
+#define CONFIG_SMC911X_32_BIT	1
 
 /*
  * Miscellaneous configurable options

include/configs/imx31_phycore.h

@@ -106,9 +106,10 @@
 	"prg_jffs2=tftpboot 0x80000000 $(jffs2); erase 0xa01c0000 0xa1ffffff; cp.b 0x80000000 0xa01c0000 $(filesize)\0"
 
 
-#define CONFIG_DRIVER_SMC911X		1
-#define CONFIG_DRIVER_SMC911X_BASE	0xa8000000
-#define CONFIG_DRIVER_SMC911X_32_BIT	1
+#define CONFIG_NET_MULTI
+#define CONFIG_SMC911X		1
+#define CONFIG_SMC911X_BASE	0xa8000000
+#define CONFIG_SMC911X_32_BIT	1
 
 /*
  * Miscellaneous configurable options

include/configs/mx31pdk.h

@@ -106,9 +106,10 @@
 	"bootcmd_net=run bootargs_base bootargs_mtd bootargs_nfs; "	\
 		"tftpboot 0x81000000 uImage-mx31; bootm\0"
 
-#define CONFIG_DRIVER_SMC911X		1
-#define CONFIG_DRIVER_SMC911X_BASE	0xB6000000
-#define CONFIG_DRIVER_SMC911X_32_BIT	1
+#define CONFIG_NET_MULTI
+#define CONFIG_SMC911X		1
+#define CONFIG_SMC911X_BASE	0xB6000000
+#define CONFIG_SMC911X_32_BIT	1
 
 /*
  * Miscellaneous configurable options

include/configs/omap3_evm.h

@@ -302,9 +302,10 @@ extern unsigned int boot_flash_type;
  */
 #if defined(CONFIG_CMD_NET)
 
-#define CONFIG_DRIVER_SMC911X
-#define CONFIG_DRIVER_SMC911X_32_BIT
-#define CONFIG_DRIVER_SMC911X_BASE	0x2C000000
+#define CONFIG_NET_MULTI
+#define CONFIG_SMC911X
+#define CONFIG_SMC911X_32_BIT
+#define CONFIG_SMC911X_BASE	0x2C000000
 
 #endif /* (CONFIG_CMD_NET) */
 

include/configs/rsk7203.h

@@ -105,8 +105,9 @@
 #define CONFIG_SYS_HZ			(CONFIG_SYS_CLK_FREQ / CMT_CLK_DIVIDER)
 
 /* Network interface */
-#define CONFIG_DRIVER_SMC911X
-#define CONFIG_DRIVER_SMC911X_16_BIT
-#define CONFIG_DRIVER_SMC911X_BASE (0x24000000)
+#define CONFIG_NET_MULTI
+#define CONFIG_SMC911X
+#define CONFIG_SMC911X_16_BIT
+#define CONFIG_SMC911X_BASE (0x24000000)
 
 #endif	/* __RSK7203_H */

include/configs/vct.h

@@ -89,10 +89,11 @@
 /*
  * SMSC91C11x Network Card
  */
-#define CONFIG_DRIVER_SMC911X
-#define CONFIG_DRIVER_SMC911X_BASE	0x00000000
-#define CONFIG_DRIVER_SMC911X_32_BIT
+#define CONFIG_SMC911X
+#define CONFIG_SMC911X_BASE	0x00000000
+#define CONFIG_SMC911X_32_BIT
 #define CONFIG_NET_RETRY_COUNT		20
+#define CONFIG_NET_MULTI
 #endif
 
 /*
@@ -342,7 +343,7 @@ int vct_gpio_get(int pin);
 #undef CONFIG_CMD_TERMINAL
 #undef CONFIG_CMD_USB
 
-#undef CONFIG_DRIVER_SMC911X
+#undef CONFIG_SMC911X
 #undef CONFIG_SOFT_I2C
 #undef CONFIG_SOURCE
 #undef CONFIG_SYS_LONGHELP

include/netdev.h

@@ -71,6 +71,7 @@ int rtl8139_initialize(bd_t *bis);
 int rtl8169_initialize(bd_t *bis);
 int scc_initialize(bd_t *bis);
 int skge_initialize(bd_t *bis);
+int smc911x_initialize(u8 dev_num, int base_addr);
 int tsi108_eth_initialize(bd_t *bis);
 int uec_initialize(int index);
 int uec_standard_init(bd_t *bis);