mpc512x: use common code for CSx configuration

Remove CSx configurations from board code and only define
required CSx macros in the board config file to configure
chip select windows and parameters.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
Cc: Wolfgang Denk <wd@denx.de>

board/davedenx/aria/aria.c

@@ -55,37 +55,6 @@ DECLARE_GLOBAL_DATA_PTR;
 int board_early_init_f(void)
 {
 	volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
-	u32 spridr;
-
-	/*
-	 * Initialize Local Window for the On Board FPGA access
-	 */
-	out_be32(&im->sysconf.lpcs2aw,
-		CSAW_START(CONFIG_SYS_ARIA_FPGA_BASE) |
-		CSAW_STOP(CONFIG_SYS_ARIA_FPGA_BASE, CONFIG_SYS_ARIA_FPGA_SIZE)
-	);
-	out_be32(&im->lpc.cs_cfg[2], CONFIG_SYS_CS2_CFG);
-	sync_law(&im->sysconf.lpcs2aw);
-
-	/*
-	 * Initialize Local Window for the On Board SRAM access
-	 */
-	out_be32(&im->sysconf.lpcs6aw,
-		CSAW_START(CONFIG_SYS_ARIA_SRAM_BASE) |
-		CSAW_STOP(CONFIG_SYS_ARIA_SRAM_BASE, CONFIG_SYS_ARIA_SRAM_SIZE)
-	);
-	out_be32(&im->lpc.cs_cfg[6], CONFIG_SYS_CS6_CFG);
-	sync_law(&im->sysconf.lpcs6aw);
-
-	/*
-	 * Configure Flash Speed
-	 */
-	out_be32(&im->lpc.cs_cfg[0], CONFIG_SYS_CS0_CFG);
-
-	spridr = in_be32(&im->sysconf.spridr);
-
-	if (SVR_MJREV(spridr) >= 2)
-		out_be32(&im->lpc.altr, CONFIG_SYS_CS_ALETIMING);
 
 	/*
 	 * Enable clocks

board/esd/mecp5123/mecp5123.c

@@ -65,17 +65,8 @@ int eeprom_write_enable(unsigned dev_addr, int state)
 int board_early_init_f(void)
 {
 	volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
-	u32 spridr;
 	int i;
 
-	/*
-	 * Initialize Local Window for NOR FLASH access
-	 */
-	out_be32(&im->sysconf.lpcs0aw,
-		 CSAW_START(CONFIG_SYS_FLASH_BASE) |
-		 CSAW_STOP(CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_SIZE));
-	sync_law(&im->sysconf.lpcs0aw);
-
 	/*
 	 * Initialize Local Window for boot access
 	 */
@@ -83,28 +74,6 @@ int board_early_init_f(void)
 		 CSAW_START(0xffb00000) | CSAW_STOP(0xffb00000, 0x00010000));
 	sync_law(&im->sysconf.lpbaw);
 
-	/*
-	 * Initialize Local Window for VPC3 access
-	 */
-	out_be32(&im->sysconf.lpcs1aw,
-		 CSAW_START(CONFIG_SYS_VPC3_BASE) |
-		 CSAW_STOP(CONFIG_SYS_VPC3_BASE, CONFIG_SYS_VPC3_SIZE));
-	sync_law(&im->sysconf.lpcs1aw);
-
-	/*
-	 * Configure Flash Speed
-	 */
-	out_be32(&im->lpc.cs_cfg[0], CONFIG_SYS_CS0_CFG);
-
-	/*
-	 * Configure VPC3 Speed
-	 */
-	out_be32(&im->lpc.cs_cfg[1], CONFIG_SYS_CS1_CFG);
-
-	spridr = in_be32(&im->sysconf.spridr);
-	if (SVR_MJREV(spridr) >= 2)
-		out_be32(&im->lpc.altr, CONFIG_SYS_CS_ALETIMING);
-
 	/*
 	 * Enable clocks
 	 */

board/freescale/mpc5121ads/mpc5121ads.c

@@ -84,18 +84,6 @@ void mpc5121_nfc_select_chip(struct mtd_info *mtd, int chip)
 int board_early_init_f(void)
 {
 	volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
-	u32 spridr;
-
-	/*
-	 * Initialize Local Window for the CPLD registers access (CS2 selects
-	 * the CPLD chip)
-	 */
-	out_be32(&im->sysconf.lpcs2aw,
-		CSAW_START(CONFIG_SYS_CPLD_BASE) |
-		CSAW_STOP(CONFIG_SYS_CPLD_BASE, CONFIG_SYS_CPLD_SIZE)
-	);
-	out_be32(&im->lpc.cs_cfg[2], CONFIG_SYS_CS2_CFG);
-	sync_law(&im->sysconf.lpcs2aw);
 
 	/*
 	 * Disable Boot NOR FLASH write protect - CPLD Reg 8 NOR FLASH Control
@@ -114,15 +102,6 @@ int board_early_init_f(void)
 		out_8((u8 *)(CONFIG_SYS_CPLD_BASE + 0x08), 0x32);
 	}
 #endif
-	/*
-	 * Configure Flash Speed
-	 */
-	out_be32(&im->lpc.cs_cfg[0], CONFIG_SYS_CS0_CFG);
-
-	spridr = in_be32(&im->sysconf.spridr);
-
-	if (SVR_MJREV (spridr) >= 2)
-		out_be32 (&im->lpc.altr, CONFIG_SYS_CS_ALETIMING);
 
 	/*
 	 * Enable clocks

board/pdm360ng/pdm360ng.c

@@ -63,32 +63,6 @@ int board_early_init_f(void)
 {
 	volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
 
-	/*
-	 * Initialize Local Window for FLASH-Bank1 access (CS1)
-	 */
-	out_be32(&im->sysconf.lpcs1aw,
-		CSAW_START(CONFIG_SYS_FLASH1_BASE) |
-		CSAW_STOP(CONFIG_SYS_FLASH1_BASE, CONFIG_SYS_FLASH_SIZE)
-	);
-	out_be32(&im->lpc.cs_cfg[1], CONFIG_SYS_CS1_CFG);
-
-	/*
-	 * Local Window for MRAM access (CS2)
-	 */
-	out_be32(&im->sysconf.lpcs2aw,
-		CSAW_START(CONFIG_SYS_MRAM_BASE) |
-		CSAW_STOP(CONFIG_SYS_MRAM_BASE, CONFIG_SYS_MRAM_SIZE)
-	);
-	out_be32(&im->lpc.cs_cfg[2], CONFIG_SYS_CS2_CFG);
-
-	sync_law(&im->sysconf.lpcs2aw);
-
-	/*
-	 * Configure Flash Speed
-	 */
-	out_be32(&im->lpc.cs_cfg[0], CONFIG_SYS_CS0_CFG);
-	out_be32(&im->lpc.altr, CONFIG_SYS_CS_ALETIMING);
-
 	/*
 	 * Enable clocks
 	 */

include/configs/aria.h

@@ -266,11 +266,16 @@
 #define CONFIG_SYS_ARIA_SRAM_BASE	(CONFIG_SYS_SRAM_BASE + \
 					 CONFIG_SYS_SRAM_SIZE)
 #define CONFIG_SYS_ARIA_SRAM_SIZE	0x00100000	/* reserve 1MB-window */
+#define CONFIG_SYS_CS6_START		CONFIG_SYS_ARIA_SRAM_BASE
+#define CONFIG_SYS_CS6_SIZE		CONFIG_SYS_ARIA_SRAM_SIZE
 
 #define CONFIG_SYS_ARIA_FPGA_BASE	(CONFIG_SYS_ARIA_SRAM_BASE + \
 					 CONFIG_SYS_ARIA_SRAM_SIZE)
 #define CONFIG_SYS_ARIA_FPGA_SIZE	0x20000		/* 128 KB */
 
+#define CONFIG_SYS_CS2_START		CONFIG_SYS_ARIA_FPGA_BASE
+#define CONFIG_SYS_CS2_SIZE		CONFIG_SYS_ARIA_FPGA_SIZE
+
 #define CONFIG_SYS_CS0_CFG		0x05059150
 #define CONFIG_SYS_CS2_CFG		(	(5 << 24) | \
 						(5 << 16) | \

include/configs/mecp5123.h

@@ -191,6 +191,10 @@
 #define CONFIG_SYS_SRAM_BASE		0x30000000
 #define CONFIG_SYS_SRAM_SIZE		0x00020000	/* 128 KB */
 
+/* Initialize Local Window for NOR FLASH access */
+#define CONFIG_SYS_CS0_START		CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_CS0_SIZE		CONFIG_SYS_FLASH_SIZE
+
 /* ALE active low, data size 4bytes */
 #define CONFIG_SYS_CS0_CFG		0x05051150
 
@@ -201,6 +205,9 @@
 #define CONFIG_SYS_CS1_CFG		0x1f1f3090
 #define CONFIG_SYS_VPC3_BASE		0x82000000	/* start of VPC3 space */
 #define CONFIG_SYS_VPC3_SIZE		0x00010000	/* max VPC3 size */
+/* Initialize Local Window for VPC3 access */
+#define CONFIG_SYS_CS1_START		CONFIG_SYS_VPC3_BASE
+#define CONFIG_SYS_CS1_SIZE		CONFIG_SYS_VPC3_SIZE
 
 /* Use SRAM for initial stack */
 #define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_SRAM_BASE /* Init RAM addr */

include/configs/mpc5121ads.h

@@ -258,6 +258,8 @@
  */
 #define CONFIG_SYS_CPLD_BASE		0x82000000
 #define CONFIG_SYS_CPLD_SIZE		0x00010000	/* 64 KB */
+#define CONFIG_SYS_CS2_START		CONFIG_SYS_CPLD_BASE
+#define CONFIG_SYS_CS2_SIZE		CONFIG_SYS_CPLD_SIZE
 
 #define CONFIG_SYS_SRAM_BASE		0x30000000
 #define CONFIG_SYS_SRAM_SIZE		0x00020000	/* 128 KB */

include/configs/pdm360ng.h

@@ -206,6 +206,9 @@
 #define CONFIG_SYS_SRAM_BASE		0x50000000
 #define CONFIG_SYS_SRAM_SIZE		0x00020000	/* 128 KB */
 
+#define CONFIG_SYS_CS1_START		CONFIG_SYS_FLASH1_BASE
+#define CONFIG_SYS_CS1_SIZE		CONFIG_SYS_FLASH_SIZE
+
 /* ALE active low, data size 4 bytes */
 #define CONFIG_SYS_CS0_CFG		0x05059350
 /* ALE active low, data size 4 bytes */
@@ -213,6 +216,9 @@
 
 #define CONFIG_SYS_MRAM_BASE		0x50040000
 #define CONFIG_SYS_MRAM_SIZE		0x00020000
+#define CONFIG_SYS_CS2_START		CONFIG_SYS_MRAM_BASE
+#define CONFIG_SYS_CS2_SIZE		CONFIG_SYS_MRAM_SIZE
+
 /* ALE active low, data size 4 bytes */
 #define CONFIG_SYS_CS2_CFG		0x05059110