include/configs: Use new CONFIG_CMD_* in various A* named board config files.

Since ADS860.h includes "board/fads/fads.h" with ramifications
on the CONFIG_COMMAND treatment, it too has to be adjusted to
exclude already configured commands in this same commit.

Signed-off-by: Jon Loeliger <jdl@freescale.com>

board/fads/fads.h

@@ -95,21 +95,23 @@
 #define CFG_DISCOVER_PHY
 #endif
 
-#ifndef CONFIG_COMMANDS
-#define CONFIG_COMMANDS	(CONFIG_CMD_DFL   \
-			 | CFG_CMD_ASKENV \
-			 | CFG_CMD_DHCP   \
-			 | CFG_CMD_ECHO   \
-			 | CFG_CMD_IMMAP  \
-			 | CFG_CMD_JFFS2  \
-			 | CFG_CMD_MII    \
-			 | CFG_CMD_PCMCIA \
-			 | CFG_CMD_PING   \
-			)
-#endif /* !CONFIG_COMMANDS */
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+#if !defined(FADS_COMMANDS_ALREADY_DEFINED)
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ECHO
+#define CONFIG_CMD_IMMAP
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PCMCIA
+#define CONFIG_CMD_PING
+
+#endif
+
 
 /*
  * Miscellaneous configurable options

include/configs/A3000.h

@@ -52,23 +52,11 @@
 
 #define CONFIG_BOOTDELAY	5
 
-#if 0
-#define CONFIG_COMMANDS		( CONFIG_CMD_DFL | \
-				  CFG_CMD_BEDBUG | \
-				  CFG_CMD_BSP    | \
-				  CFG_CMD_ELF    | \
-				  CFG_CMD_I2C 	 | \
-				  CFG_CMD_FLASH | \
-				  CFG_CMD_BEDBUG | \
-				  CFG_CMD_NET    | \
-				  CFG_CMD_PCI )
-#endif
-
-#define CONFIG_COMMANDS		( CONFIG_CMD_DFL )
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) 	*/
 
-#include <cmd_confdefs.h>
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
 
 
 /*
@@ -309,7 +297,7 @@
  * Cache Configuration
  */
 #define CFG_CACHELINE_SIZE	32
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
 #endif
 

include/configs/ADCIOP.h

@@ -59,21 +59,23 @@
 #define CONFIG_IPADDR		10.0.18.222
 #define CONFIG_SERVERIP		10.0.18.190
 
-#define CONFIG_COMMANDS	      ( CONFIG_CMD_DFL	| \
-				CFG_CMD_DHCP	| \
-				CFG_CMD_IRQ	| \
-				CFG_CMD_ELF	| \
-				CFG_CMD_ASKENV	)
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_ASKENV
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
 
 /*
  * Miscellaneous configurable options
  */
 #define CFG_LONGHELP			/* undef to save memory		*/
 #define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
 #define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
@@ -185,7 +187,7 @@
  */
 #define CFG_DCACHE_SIZE		2048	/* For PLX IOP480			*/
 #define CFG_CACHELINE_SIZE	16	/* For AMCC 401/403 CPUs		*/
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
 #endif
 

include/configs/ADNPESC1.h

@@ -401,15 +401,8 @@
 #define	CONFIG_RTC_DS1306	1	/* Dallas 1306 real time clock	*/
 #define CFG_SPI_RTC_DEVID	0	/*        as 1st SPI device	*/
 
-#define	__SPI_CMD_OFF		0	/* allow default commands:	*/
-					/*	CFG_CMD_SPI		*/
-					/*	CFG_CMD_DATE		*/
-
 #else
 #undef	CONFIG_NIOS_SPI				/* NO SPI support	*/
-#define	__SPI_CMD_OFF	(	CFG_CMD_SPI	\
-			|	CFG_CMD_DATE	\
-			)
 #endif
 
 /*------------------------------------------------------------------------
@@ -570,45 +563,49 @@
 #define	CONFIG_POST			CFG_POST_RTC
 #define	CFG_NIOS_POST_WORD_ADDR		(CFG_MONITOR_BASE + CFG_MONITOR_LEN)
 
-/*------------------------------------------------------------------------
- * COMMANDS
- *----------------------------------------------------------------------*/
-#define CONFIG_COMMANDS		(CFG_CMD_ALL & ~( \
-				 CFG_CMD_ASKENV | \
-				 CFG_CMD_BEDBUG | \
-				 CFG_CMD_BMP	| \
-				 CFG_CMD_CACHE	| \
-				 CFG_CMD_DOC	| \
-				 CFG_CMD_DTT	| \
-				 CFG_CMD_EEPROM | \
-				 CFG_CMD_ELF    | \
-				 CFG_CMD_FAT	| \
-				 CFG_CMD_FDC	| \
-				 CFG_CMD_FDOS	| \
-				 CFG_CMD_HWFLOW	| \
-				 CFG_CMD_IDE	| \
-				 CFG_CMD_I2C	| \
-				 CFG_CMD_JFFS2	| \
-				 CFG_CMD_KGDB	| \
-				 CFG_CMD_NAND	| \
-				 CFG_CMD_NFS	| \
-				 CFG_CMD_MMC	| \
-				 CFG_CMD_MII	| \
-				 CFG_CMD_PCI	| \
-				 CFG_CMD_PCMCIA | \
-				 CFG_CMD_SCSI	| \
-				 CFG_CMD_VFD	| \
-				 CFG_CMD_USB	| \
-				 CFG_CMD_XIMG	| \
-				 __SPI_CMD_OFF	) )
-
-
-#include <cmd_confdefs.h>
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_all.h>
+
+#undef CONFIG_CMD_ASKENV
+#undef CONFIG_CMD_BEDBUG
+#undef CONFIG_CMD_BMP
+#undef CONFIG_CMD_CACHE
+#undef CONFIG_CMD_DOC
+#undef CONFIG_CMD_DTT
+#undef CONFIG_CMD_EEPROM
+#undef CONFIG_CMD_ELF   
+#undef CONFIG_CMD_FAT
+#undef CONFIG_CMD_FDC
+#undef CONFIG_CMD_FDOS
+#undef CONFIG_CMD_HWFLOW
+#undef CONFIG_CMD_IDE
+#undef CONFIG_CMD_I2C
+#undef CONFIG_CMD_JFFS2
+#undef CONFIG_CMD_KGDB
+#undef CONFIG_CMD_NAND
+#undef CONFIG_CMD_NFS
+#undef CONFIG_CMD_MMC
+#undef CONFIG_CMD_MII
+#undef CONFIG_CMD_PCI
+#undef CONFIG_CMD_PCMCIA
+#undef CONFIG_CMD_SCSI
+#undef CONFIG_CMD_VFD
+#undef CONFIG_CMD_USB
+#undef CONFIG_CMD_XIMG
+
+#if (CFG_NIOS_CPU_SPI_NUMS != 1)
+#undef CONFIG_CMD_SPI
+#undef CONFIG_CMD_DATE
+#endif
+
 
 /*------------------------------------------------------------------------
  * KGDB
  *----------------------------------------------------------------------*/
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	9600
 #endif
 

include/configs/ADS860.h

@@ -37,13 +37,19 @@
 
 #define CONFIG_DRAM_50MHZ		1
 
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL   \
-			 | CFG_CMD_DHCP   \
-			 | CFG_CMD_IMMAP  \
-			 | CFG_CMD_PCMCIA \
-			 | CFG_CMD_PING   \
-			)
 
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_IMMAP
+#define CONFIG_CMD_PCMCIA
+#define CONFIG_CMD_PING
+
+/* This is picked up again in fads.h */
+#define FADS_COMMANDS_ALREADY_DEFINED
 
 #include "fads.h"
 

include/configs/AMX860.h

@@ -61,38 +61,40 @@
 
 #undef CONFIG_BOOTARGS
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#undef	CONFIG_KGDB_ON_SMC		/* define if kgdb on SMC */
-#define	CONFIG_KGDB_ON_SCC		/* define if kgdb on SCC */
-#undef	CONFIG_KGDB_NONE		/* define if kgdb on something else */
-#define CONFIG_KGDB_INDEX	1	/* which serial channel for kgdb */
-#define CONFIG_KGDB_BAUDRATE	9600	/* speed to run kgdb serial port at */
-#endif
-
-
 #undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
 
 #define	CONFIG_SCC1_ENET	1	/* use SCC1 ethernet */
 
 #define	CONFIG_RTC_MPC8xx		/* use internal RTC of MPC8xx	*/
 
-#define CONFIG_COMMANDS	      ( CONFIG_CMD_DFL	| \
-				CFG_CMD_DHCP	| \
-				CFG_CMD_DATE	| \
-				CFG_CMD_NFS	| \
-				CFG_CMD_SNTP	)
 
-#define CONFIG_BOOTP_MASK	(CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_SNTP
+
+
+#if defined(CONFIG_CMD_KGDB)
+#undef	CONFIG_KGDB_ON_SMC		/* define if kgdb on SMC */
+#define	CONFIG_KGDB_ON_SCC		/* define if kgdb on SCC */
+#undef	CONFIG_KGDB_NONE		/* define if kgdb on something else */
+#define CONFIG_KGDB_INDEX	1	/* which serial channel for kgdb */
+#define CONFIG_KGDB_BAUDRATE	9600	/* speed to run kgdb serial port at */
+#endif
+
+#define CONFIG_BOOTP_MASK	(CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
 
 /*
  * Miscellaneous configurable options
  */
 #define CFG_LONGHELP			/* undef to save memory		*/
 #define	CFG_PROMPT		"=> "	/* Monitor Command Prompt	*/
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define	CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
 #define	CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
@@ -196,7 +198,7 @@
  * Cache Configuration
  */
 #define CFG_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
 #endif
 

include/configs/AP1000.h

@@ -66,18 +66,20 @@
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
 #define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
-#define CONFIG_COMMANDS	       (CONFIG_CMD_DFL	| \
-				CFG_CMD_ASKENV	| \
-				CFG_CMD_DHCP	| \
-				CFG_CMD_ELF	| \
-				CFG_CMD_IRQ	| \
-				CFG_CMD_MVENV	| \
-				CFG_CMD_PCI	| \
-				CFG_CMD_PING	\
-			       )
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_MVENV
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+
 
 #undef CONFIG_WATCHDOG			/* watchdog disabled	    */
 
@@ -89,7 +91,7 @@
  * Miscellaneous configurable options
  */
 #define CFG_LONGHELP			/* undef to save memory	    */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE	1024		/* Console I/O Buffer Size  */
 #else
 #define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
@@ -188,7 +190,7 @@
  */
 #define CFG_DCACHE_SIZE		16384
 #define CFG_CACHELINE_SIZE	32
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value    */
 #endif
 
@@ -228,7 +230,7 @@
 #define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH */
 #define BOOTFLAG_WARM	0x02		/* Software reboot		*/
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif

include/configs/APC405.h

@@ -67,27 +67,29 @@
 
 #define CONFIG_PHY_CLK_FREQ	EMAC_STACR_CLK_66MHZ /* 66 MHz OPB clock*/
 
-#define CONFIG_COMMANDS	      ( CONFIG_CMD_DFL	| \
-				CFG_CMD_DHCP	| \
-				CFG_CMD_PCI	| \
-				CFG_CMD_IRQ	| \
-				CFG_CMD_IDE	| \
-				CFG_CMD_FAT	| \
-				CFG_CMD_ELF	| \
-				CFG_CMD_DATE	| \
-				CFG_CMD_I2C	| \
-				CFG_CMD_MII	| \
-				CFG_CMD_PING	| \
-				CFG_CMD_EEPROM  )
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_EEPROM 
 
 #define CONFIG_MAC_PARTITION
 #define CONFIG_DOS_PARTITION
 
 #define CONFIG_SUPPORT_VFAT
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
-
 #undef  CONFIG_WATCHDOG			/* watchdog disabled		*/
 
 #define CONFIG_RTC_MC146818             /* DS1685 is MC146818 compatible*/
@@ -106,7 +108,7 @@
 #define	CFG_PROMPT_HUSH_PS2	"> "
 #endif
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define	CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
 #define	CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
@@ -266,7 +268,7 @@
 #define CFG_DCACHE_SIZE		16384	/* For AMCC 405 CPUs, older 405 ppc's   */
 					/* have only 8kB, 16kB is save here     */
 #define CFG_CACHELINE_SIZE	32	/* ...			*/
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
 #endif
 

include/configs/AR405.h

@@ -71,17 +71,20 @@
 #define CONFIG_PHY_ADDR		0	/* PHY address			*/
 #define CONFIG_LXT971_NO_SLEEP  1       /* disable sleep mode in LXT971 */
 
-#define CONFIG_COMMANDS	      ( CONFIG_CMD_DFL	| \
-				CFG_CMD_DHCP	| \
-				CFG_CMD_PCI	| \
-				CFG_CMD_IRQ	| \
-				CFG_CMD_ELF	| \
-				CFG_CMD_MII	| \
-				CFG_CMD_PING	| \
-				CFG_CMD_BSP	)
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_BSP
+
 
 #undef CONFIG_WATCHDOG			/* watchdog disabled		*/
 
@@ -92,7 +95,7 @@
  */
 #define CFG_LONGHELP			/* undef to save memory		*/
 #define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
 #define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
@@ -207,7 +210,7 @@
 #define CFG_DCACHE_SIZE		16384	/* For AMCC 405 CPUs, older 405 ppc's	*/
 					/* have only 8kB, 16kB is save here	*/
 #define CFG_CACHELINE_SIZE	32	/* ...			*/
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
 #endif
 

include/configs/ASH405.h

@@ -59,19 +59,22 @@
 
 #define CONFIG_PHY_CLK_FREQ	EMAC_STACR_CLK_66MHZ /* 66 MHz OPB clock*/
 
-#define CONFIG_COMMANDS	      ( CONFIG_CMD_DFL	| \
-				CFG_CMD_DHCP	| \
-				CFG_CMD_IRQ	| \
-				CFG_CMD_ELF	| \
-				CFG_CMD_NAND	| \
-				CFG_CMD_DATE	| \
-				CFG_CMD_I2C	| \
-				CFG_CMD_MII	| \
-				CFG_CMD_PING	| \
-				CFG_CMD_EEPROM	)
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_EEPROM
+
 
 #undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
 
@@ -91,7 +94,7 @@
 #define CFG_PROMPT_HUSH_PS2	"> "
 #endif
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
 #define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
@@ -270,7 +273,7 @@
 #define CFG_DCACHE_SIZE		16384	/* For AMCC 405 CPUs, older 405 ppc's	*/
 					/* have only 8kB, 16kB is save here	*/
 #define CFG_CACHELINE_SIZE	32	/* ...			*/
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
 #endif
 

include/configs/Adder.h

@@ -52,15 +52,17 @@
 #define CFG_8xx_CPUCLK_MAX		133000000
 #endif /* CONFIG_MPC852T */
 
-#define CONFIG_COMMANDS		(CONFIG_CMD_DFL  \
-				| CFG_CMD_DHCP   \
-				| CFG_CMD_IMMAP  \
-				| CFG_CMD_MII    \
-				| CFG_CMD_PING   \
-				)
-
-/* This must be included AFTER the definition of CONFIG_COMMANDS */
-#include <cmd_confdefs.h>
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DHCP  
+#define CONFIG_CMD_IMMAP 
+#define CONFIG_CMD_MII   
+#define CONFIG_CMD_PING  
+
 
 #define CONFIG_BOOTDELAY	5		/* Autoboot after 5 seconds	*/
 #define CONFIG_BOOTCOMMAND	"bootm fe040000"	/* Autoboot command	*/

include/configs/Alaska8220.h

@@ -39,12 +39,6 @@
 #define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH */
 #define BOOTFLAG_WARM		0x02	/* Software reboot	*/
 
-#define CFG_CACHELINE_SIZE	32	/* For MPC8220 CPUs */
-
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#  define CFG_CACHELINE_SHIFT	5   /* log base 2 of the above value */
-#endif
-
 /*
  * Serial console configuration
  */
@@ -70,31 +64,31 @@
 
 #define CONFIG_TIMESTAMP			/* Print image info with timestamp */
 
+
 /*
- * Supported commands
+ * Command line configuration.
  */
-#define CONFIG_COMMANDS	      ( CONFIG_CMD_DFL	| \
-				CFG_CMD_BOOTD	| \
-				CFG_CMD_CACHE	| \
-				CFG_CMD_DHCP	| \
-				CFG_CMD_DIAG	| \
-				CFG_CMD_EEPROM	| \
-				CFG_CMD_ELF	| \
-				CFG_CMD_I2C	| \
-				CFG_CMD_NET	| \
-				CFG_CMD_NFS	| \
-				CFG_CMD_PCI	| \
-				CFG_CMD_PING	| \
-				CFG_CMD_REGINFO | \
-				CFG_CMD_SDRAM	| \
-				CFG_CMD_SNTP	)
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_BOOTD
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_SDRAM
+#define CONFIG_CMD_SNTP
+
 
 #define CONFIG_NET_MULTI
 #define CONFIG_MII
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
-
 /*
  * Autobooting
  */
@@ -282,7 +276,7 @@
  */
 #define CFG_LONGHELP			    /* undef to save memory	*/
 #define CFG_PROMPT		"=> "	    /* Monitor Command Prompt	*/
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE		1024	    /* Console I/O Buffer Size	*/
 #else
 #define CFG_CBSIZE		256	    /* Console I/O Buffer Size	*/
@@ -298,6 +292,11 @@
 
 #define CFG_HZ			1000	    /* decrementer freq: 1 ms ticks */
 
+#define CFG_CACHELINE_SIZE	32	/* For MPC8220 CPUs */
+#if defined(CONFIG_CMD_KGDB)
+#  define CFG_CACHELINE_SHIFT	5   /* log base 2 of the above value */
+#endif
+
 /*
  * Various low-level settings
  */

include/configs/AmigaOneG3SE.h

@@ -63,32 +63,31 @@
 #define CONFIG_DOS_PARTITION
 #define CONFIG_AMIGA_PARTITION
 
-#define CONFIG_COMMANDS		(CONFIG_CMD_DFL | \
-				 CFG_CMD_ASKENV | \
-				 CFG_CMD_BSP	| \
-				 CFG_CMD_DATE	| \
-				 CFG_CMD_DHCP	| \
-				 CFG_CMD_ELF	| \
-				 CFG_CMD_NET	| \
-				 CFG_CMD_IDE	| \
-				 CFG_CMD_FDC	| \
-				 CFG_CMD_CACHE	| \
-				 CFG_CMD_CONSOLE| \
-				 CFG_CMD_USB	| \
-				 CFG_CMD_BSP	| \
-				 CFG_CMD_PCI	)
-
-/*				    CFG_CMD_MII	   | \ */
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_BSP
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_FDC
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_CONSOLE|
+#define CONFIG_CMD_USB
+#define CONFIG_CMD_BSP
+#define CONFIG_CMD_PCI
+
 
 #define CONFIG_PCI		1
 /* #define CONFIG_PCI_SCAN_SHOW 1 */
 #define CONFIG_PCI_PNP		1	/* PCI plug-and-play */
 
-/* This must be included AFTER the definition of CONFIG_COMMANDS (if any)
- */
-#include <cmd_confdefs.h>
-
-
 /*
  * Miscellaneous configurable options
  */
@@ -247,7 +246,7 @@
  * Cache Configuration
  */
 #define CFG_CACHELINE_SIZE	32
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
 #endif