mx23: Add register base addresses

This adds the base addresses of i.MX23 and easy the detection of wrong
order in board setup, in case no SoC has been set, an error is raised
during build.

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Stefano Babic <sbabic@denx.de>

arch/arm/include/asm/arch-mxs/regs-base.h

@@ -1,5 +1,5 @@
 /*
- * Freescale i.MX28 Peripheral Base Addresses
+ * Freescale i.MX23/i.MX28 Peripheral Base Addresses
  *
  * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
  * on behalf of DENX Software Engineering GmbH
@@ -25,12 +25,55 @@
  *
  */
 
-#ifndef __MX28_REGS_BASE_H__
-#define __MX28_REGS_BASE_H__
+#ifndef __MXS_REGS_BASE_H__
+#define __MXS_REGS_BASE_H__
 
 /*
- * Register base address
+ * Register base addresses for i.MX23
  */
+#if defined(CONFIG_MX23)
+#define	MXS_ICOLL_BASE		0x80000000
+#define	MXS_APBH_BASE		0x80004000
+#define	MXS_ECC8_BASE		0x80008000
+#define	MXS_BCH_BASE		0x8000A000
+#define	MXS_GPMI_BASE		0x8000C000
+#define	MXS_SSP0_BASE		0x80010000
+#define	MXS_SSP1_BASE		0x80034000
+#define	MXS_ETM_BASE		0x80014000
+#define	MXS_PINCTRL_BASE	0x80018000
+#define	MXS_DIGCTL_BASE		0x8001C000
+#define	MXS_EMI_BASE		0x80020000
+#define	MXS_APBX_BASE		0x80024000
+#define	MXS_DCP_BASE		0x80028000
+#define	MXS_PXP_BASE		0x8002A000
+#define	MXS_OCOTP_BASE		0x8002C000
+#define	MXS_AXI_BASE		0x8002E000
+#define	MXS_LCDIF_BASE		0x80030000
+#define	MXS_SSP1_BASE		0x80034000
+#define	MXS_TVENC_BASE		0x80038000
+#define	MXS_CLKCTRL_BASE	0x80040000
+#define	MXS_SAIF0_BASE		0x80042000
+#define	MXS_POWER_BASE		0x80044000
+#define	MXS_SAIF1_BASE		0x80046000
+#define	MXS_AUDIOOUT_BASE	0x80048000
+#define	MXS_AUDIOIN_BASE	0x8004C000
+#define	MXS_LRADC_BASE		0x80050000
+#define	MXS_SPDIF_BASE		0x80054000
+#define	MXS_I2C0_BASE		0x80058000
+#define	MXS_RTC_BASE		0x8005C000
+#define	MXS_PWM_BASE		0x80064000
+#define	MXS_TIMROT_BASE		0x80068000
+#define	MXS_UARTAPP0_BASE	0x8006C000
+#define	MXS_UARTAPP1_BASE	0x8006E000
+#define	MXS_UARTDBG_BASE	0x80070000
+#define	MXS_USBPHY0_BASE	0x8007C000
+#define	MXS_USBCTRL0_BASE	0x80080000
+#define	MXS_DRAM_BASE		0x800E0000
+
+/*
+ * Register base addresses for i.MX28
+ */
+#elif defined(CONFIG_MX28)
 #define	MXS_ICOL_BASE		0x80000000
 #define	MXS_HSADC_BASE		0x80002000
 #define	MXS_APBH_BASE		0x80004000
@@ -84,5 +127,8 @@
 #define	MXS_DRAM_BASE		0x800E0000
 #define	MXS_ENET0_BASE		0x800F0000
 #define	MXS_ENET1_BASE		0x800F4000
+#else
+#error Unkown SoC. Please set CONFIG_MX23 or CONFIG_MX28
+#endif
 
-#endif /* __MX28_REGS_BASE_H__ */
+#endif /* __MXS_REGS_BASE_H__ */