Merge branch 'master' of git://git.denx.de/u-boot-usb

* 'master' of git://git.denx.de/u-boot-usb:
  USB: S5P: Add ehci support
  usb:udc:samsung Add functions for storing private gadget data in UDC driver
  usb:gadget:composite: Support for composite at gadget.h
  usb:gadget:composite USB composite gadget support
  usb:udc:samsung:cleanup Replace DEBUG_* macros with debug_cond() calls
  usb:udc: Remove duplicated USB definitions from include/linux/usb/ch9.h file
  USB: Document the QH and qTD antics in EHCI-HCD
  USB: Drop cache flush bloat in EHCI-HCD
  USB: Drop ehci_alloc/ehci_free in ehci-hcd
  USB: Align buffers at cacheline
  usb: use noinline define

arch/arm/include/asm/arch-exynos/ehci-s5p.h

@@ -0,0 +1,66 @@
+/*
+ * SAMSUNG S5P USB HOST EHCI Controller
+ *
+ * Copyright (C) 2012 Samsung Electronics Co.Ltd
+ *	Vivek Gautam <gautam.vivek@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#ifndef __ASM_ARM_ARCH_EXYNOS5_EHCI_S5P_H__
+#define __ASM_ARM_ARCH_EXYNOS5_EHCI_S5P_H__
+
+#define CLK_24MHZ		5
+
+#define HOST_CTRL0_PHYSWRSTALL			(1 << 31)
+#define HOST_CTRL0_COMMONON_N			(1 << 9)
+#define HOST_CTRL0_SIDDQ			(1 << 6)
+#define HOST_CTRL0_FORCESLEEP			(1 << 5)
+#define HOST_CTRL0_FORCESUSPEND			(1 << 4)
+#define HOST_CTRL0_WORDINTERFACE		(1 << 3)
+#define HOST_CTRL0_UTMISWRST			(1 << 2)
+#define HOST_CTRL0_LINKSWRST			(1 << 1)
+#define HOST_CTRL0_PHYSWRST			(1 << 0)
+
+#define HOST_CTRL0_FSEL_MASK			(7 << 16)
+
+#define EHCICTRL_ENAINCRXALIGN			(1 << 29)
+#define EHCICTRL_ENAINCR4			(1 << 28)
+#define EHCICTRL_ENAINCR8			(1 << 27)
+#define EHCICTRL_ENAINCR16			(1 << 26)
+
+/* Register map for PHY control */
+struct s5p_usb_phy {
+	unsigned int usbphyctrl0;
+	unsigned int usbphytune0;
+	unsigned int reserved1[2];
+	unsigned int hsicphyctrl1;
+	unsigned int hsicphytune1;
+	unsigned int reserved2[2];
+	unsigned int hsicphyctrl2;
+	unsigned int hsicphytune2;
+	unsigned int reserved3[2];
+	unsigned int ehcictrl;
+	unsigned int ohcictrl;
+	unsigned int usbotgsys;
+	unsigned int reserved4;
+	unsigned int usbotgtune;
+};
+
+/* Switch on the VBUS power. */
+int board_usb_vbus_init(void);
+
+#endif /* __ASM_ARM_ARCH_EXYNOS5_EHCI_S5P_H__ */

common/cmd_usb.c

@@ -150,7 +150,8 @@ void usb_display_class_sub(unsigned char dclass, unsigned char subclass,
 
 void usb_display_string(struct usb_device *dev, int index)
 {
-	char buffer[256];
+	ALLOC_CACHE_ALIGN_BUFFER(char, buffer, 256);
+
 	if (index != 0) {
 		if (usb_string(dev, index, &buffer[0], 256) > 0)
 			printf("String: \"%s\"", buffer);

common/usb.c

@@ -47,6 +47,7 @@
 #include <common.h>
 #include <command.h>
 #include <asm/processor.h>
+#include <linux/compiler.h>
 #include <linux/ctype.h>
 #include <asm/byteorder.h>
 #include <asm/unaligned.h>
@@ -169,7 +170,7 @@ int usb_control_msg(struct usb_device *dev, unsigned int pipe,
 			unsigned short value, unsigned short index,
 			void *data, unsigned short size, int timeout)
 {
-	struct devrequest setup_packet;
+	ALLOC_CACHE_ALIGN_BUFFER(struct devrequest, setup_packet, 1);
 
 	if ((timeout == 0) && (!asynch_allowed)) {
 		/* request for a asynch control pipe is not allowed */
@@ -177,17 +178,17 @@ int usb_control_msg(struct usb_device *dev, unsigned int pipe,
 	}
 
 	/* set setup command */
-	setup_packet.requesttype = requesttype;
-	setup_packet.request = request;
-	setup_packet.value = cpu_to_le16(value);
-	setup_packet.index = cpu_to_le16(index);
-	setup_packet.length = cpu_to_le16(size);
+	setup_packet->requesttype = requesttype;
+	setup_packet->request = request;
+	setup_packet->value = cpu_to_le16(value);
+	setup_packet->index = cpu_to_le16(index);
+	setup_packet->length = cpu_to_le16(size);
 	USB_PRINTF("usb_control_msg: request: 0x%X, requesttype: 0x%X, " \
 		   "value 0x%X index 0x%X length 0x%X\n",
 		   request, requesttype, value, index, size);
 	dev->status = USB_ST_NOT_PROC; /*not yet processed */
 
-	submit_control_msg(dev, pipe, data, size, &setup_packet);
+	submit_control_msg(dev, pipe, data, size, setup_packet);
 	if (timeout == 0)
 		return (int)size;
 
@@ -261,7 +262,7 @@ int usb_maxpacket(struct usb_device *dev, unsigned long pipe)
  *
  * NOTE: Similar behaviour was observed with GCC4.6 on ARMv5.
  */
-static void  __attribute__((noinline))
+static void noinline
 usb_set_maxpacket_ep(struct usb_device *dev, int if_idx, int ep_idx)
 {
 	int b;
@@ -681,7 +682,7 @@ static int usb_string_sub(struct usb_device *dev, unsigned int langid,
  */
 int usb_string(struct usb_device *dev, int index, char *buf, size_t size)
 {
-	unsigned char mybuf[USB_BUFSIZ];
+	ALLOC_CACHE_ALIGN_BUFFER(unsigned char, mybuf, USB_BUFSIZ);
 	unsigned char *tbuf;
 	int err;
 	unsigned int u, idx;
@@ -781,7 +782,7 @@ int usb_new_device(struct usb_device *dev)
 {
 	int addr, err;
 	int tmp;
-	unsigned char tmpbuf[USB_BUFSIZ];
+	ALLOC_CACHE_ALIGN_BUFFER(unsigned char, tmpbuf, USB_BUFSIZ);
 
 	/* We still haven't set the Address yet */
 	addr = dev->devnum;
@@ -908,8 +909,8 @@ int usb_new_device(struct usb_device *dev)
 	le16_to_cpus(&dev->descriptor.idProduct);
 	le16_to_cpus(&dev->descriptor.bcdDevice);
 	/* only support for one config for now */
-	usb_get_configuration_no(dev, &tmpbuf[0], 0);
-	usb_parse_config(dev, &tmpbuf[0], 0);
+	usb_get_configuration_no(dev, tmpbuf, 0);
+	usb_parse_config(dev, tmpbuf, 0);
 	usb_set_maxpacket(dev);
 	/* we set the default configuration here */
 	if (usb_set_configuration(dev, dev->config.desc.bConfigurationValue)) {

common/usb_hub.c

@@ -153,7 +153,7 @@ int hub_port_reset(struct usb_device *dev, int port,
 			unsigned short *portstat)
 {
 	int tries;
-	struct usb_port_status portsts;
+	ALLOC_CACHE_ALIGN_BUFFER(struct usb_port_status, portsts, 1);
 	unsigned short portstatus, portchange;
 
 	USB_HUB_PRINTF("hub_port_reset: resetting port %d...\n", port);
@@ -162,13 +162,13 @@ int hub_port_reset(struct usb_device *dev, int port,
 		usb_set_port_feature(dev, port + 1, USB_PORT_FEAT_RESET);
 		mdelay(200);
 
-		if (usb_get_port_status(dev, port + 1, &portsts) < 0) {
+		if (usb_get_port_status(dev, port + 1, portsts) < 0) {
 			USB_HUB_PRINTF("get_port_status failed status %lX\n",
 					dev->status);
 			return -1;
 		}
-		portstatus = le16_to_cpu(portsts.wPortStatus);
-		portchange = le16_to_cpu(portsts.wPortChange);
+		portstatus = le16_to_cpu(portsts->wPortStatus);
+		portchange = le16_to_cpu(portsts->wPortChange);
 
 		USB_HUB_PRINTF("portstatus %x, change %x, %s\n",
 				portstatus, portchange,
@@ -206,19 +206,19 @@ int hub_port_reset(struct usb_device *dev, int port,
 void usb_hub_port_connect_change(struct usb_device *dev, int port)
 {
 	struct usb_device *usb;
-	struct usb_port_status portsts;
+	ALLOC_CACHE_ALIGN_BUFFER(struct usb_port_status, portsts, 1);
 	unsigned short portstatus;
 
 	/* Check status */
-	if (usb_get_port_status(dev, port + 1, &portsts) < 0) {
+	if (usb_get_port_status(dev, port + 1, portsts) < 0) {
 		USB_HUB_PRINTF("get_port_status failed\n");
 		return;
 	}
 
-	portstatus = le16_to_cpu(portsts.wPortStatus);
+	portstatus = le16_to_cpu(portsts->wPortStatus);
 	USB_HUB_PRINTF("portstatus %x, change %x, %s\n",
 			portstatus,
-			le16_to_cpu(portsts.wPortChange),
+			le16_to_cpu(portsts->wPortChange),
 			portspeed(portstatus));
 
 	/* Clear the connection change status */
@@ -267,7 +267,8 @@ void usb_hub_port_connect_change(struct usb_device *dev, int port)
 static int usb_hub_configure(struct usb_device *dev)
 {
 	int i;
-	unsigned char buffer[USB_BUFSIZ], *bitmap;
+	ALLOC_CACHE_ALIGN_BUFFER(unsigned char, buffer, USB_BUFSIZ);
+	unsigned char *bitmap;
 	struct usb_hub_descriptor *descriptor;
 	struct usb_hub_device *hub;
 #ifdef USB_HUB_DEBUG
@@ -389,16 +390,16 @@ static int usb_hub_configure(struct usb_device *dev)
 	usb_hub_power_on(hub);
 
 	for (i = 0; i < dev->maxchild; i++) {
-		struct usb_port_status portsts;
+		ALLOC_CACHE_ALIGN_BUFFER(struct usb_port_status, portsts, 1);
 		unsigned short portstatus, portchange;
 
-		if (usb_get_port_status(dev, i + 1, &portsts) < 0) {
+		if (usb_get_port_status(dev, i + 1, portsts) < 0) {
 			USB_HUB_PRINTF("get_port_status failed\n");
 			continue;
 		}
 
-		portstatus = le16_to_cpu(portsts.wPortStatus);
-		portchange = le16_to_cpu(portsts.wPortChange);
+		portstatus = le16_to_cpu(portsts->wPortStatus);
+		portchange = le16_to_cpu(portsts->wPortChange);
 		USB_HUB_PRINTF("Port %d Status %X Change %X\n",
 				i + 1, portstatus, portchange);
 

common/usb_storage.c

@@ -79,8 +79,7 @@ static const unsigned char us_direction[256/8] = {
 };
 #define US_DIRECTION(x) ((us_direction[x>>3] >> (x & 7)) & 1)
 
-static unsigned char usb_stor_buf[512];
-static ccb usb_ccb;
+static ccb usb_ccb __attribute__((aligned(ARCH_DMA_MINALIGN)));
 
 /*
  * CBI style
@@ -210,17 +209,17 @@ int usb_stor_info(void)
 static unsigned int usb_get_max_lun(struct us_data *us)
 {
 	int len;
-	unsigned char result;
+	ALLOC_CACHE_ALIGN_BUFFER(unsigned char, result, 1);
 	len = usb_control_msg(us->pusb_dev,
 			      usb_rcvctrlpipe(us->pusb_dev, 0),
 			      US_BBB_GET_MAX_LUN,
 			      USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN,
 			      0, us->ifnum,
-			      &result, sizeof(result),
+			      result, sizeof(char),
 			      USB_CNTL_TIMEOUT * 5);
 	USB_STOR_PRINTF("Get Max LUN -> len = %i, result = %i\n",
-			len, (int) result);
-	return (len > 0) ? result : 0;
+			len, (int) *result);
+	return (len > 0) ? *result : 0;
 }
 
 /*******************************************************************************
@@ -233,9 +232,6 @@ int usb_stor_scan(int mode)
 	unsigned char i;
 	struct usb_device *dev;
 
-	/* GJ */
-	memset(usb_stor_buf, 0, sizeof(usb_stor_buf));
-
 	if (mode == 1)
 		printf("       scanning bus for storage devices... ");
 
@@ -499,7 +495,7 @@ int usb_stor_BBB_comdat(ccb *srb, struct us_data *us)
 	int actlen;
 	int dir_in;
 	unsigned int pipe;
-	umass_bbb_cbw_t cbw;
+	ALLOC_CACHE_ALIGN_BUFFER(umass_bbb_cbw_t, cbw, 1);
 
 	dir_in = US_DIRECTION(srb->cmd[0]);
 
@@ -522,16 +518,16 @@ int usb_stor_BBB_comdat(ccb *srb, struct us_data *us)
 	/* always OUT to the ep */
 	pipe = usb_sndbulkpipe(us->pusb_dev, us->ep_out);
 
-	cbw.dCBWSignature = cpu_to_le32(CBWSIGNATURE);
-	cbw.dCBWTag = cpu_to_le32(CBWTag++);
-	cbw.dCBWDataTransferLength = cpu_to_le32(srb->datalen);
-	cbw.bCBWFlags = (dir_in ? CBWFLAGS_IN : CBWFLAGS_OUT);
-	cbw.bCBWLUN = srb->lun;
-	cbw.bCDBLength = srb->cmdlen;
+	cbw->dCBWSignature = cpu_to_le32(CBWSIGNATURE);
+	cbw->dCBWTag = cpu_to_le32(CBWTag++);
+	cbw->dCBWDataTransferLength = cpu_to_le32(srb->datalen);
+	cbw->bCBWFlags = (dir_in ? CBWFLAGS_IN : CBWFLAGS_OUT);
+	cbw->bCBWLUN = srb->lun;
+	cbw->bCDBLength = srb->cmdlen;
 	/* copy the command data into the CBW command data buffer */
 	/* DST SRC LEN!!! */
-	memcpy(cbw.CBWCDB, srb->cmd, srb->cmdlen);
-	result = usb_bulk_msg(us->pusb_dev, pipe, &cbw, UMASS_BBB_CBW_SIZE,
+	memcpy(cbw->CBWCDB, srb->cmd, srb->cmdlen);
+	result = usb_bulk_msg(us->pusb_dev, pipe, cbw, UMASS_BBB_CBW_SIZE,
 			      &actlen, USB_CNTL_TIMEOUT * 5);
 	if (result < 0)
 		USB_STOR_PRINTF("usb_stor_BBB_comdat:usb_bulk_msg error\n");
@@ -675,7 +671,7 @@ int usb_stor_BBB_transport(ccb *srb, struct us_data *us)
 	int dir_in;
 	int actlen, data_actlen;
 	unsigned int pipe, pipein, pipeout;
-	umass_bbb_csw_t csw;
+	ALLOC_CACHE_ALIGN_BUFFER(umass_bbb_csw_t, csw, 1);
 #ifdef BBB_XPORT_TRACE
 	unsigned char *ptr;
 	int index;
@@ -733,7 +729,7 @@ st:
 	retry = 0;
 again:
 	USB_STOR_PRINTF("STATUS phase\n");
-	result = usb_bulk_msg(us->pusb_dev, pipein, &csw, UMASS_BBB_CSW_SIZE,
+	result = usb_bulk_msg(us->pusb_dev, pipein, csw, UMASS_BBB_CSW_SIZE,
 				&actlen, USB_CNTL_TIMEOUT*5);
 
 	/* special handling of STALL in STATUS phase */
@@ -753,28 +749,28 @@ again:
 		return USB_STOR_TRANSPORT_FAILED;
 	}
 #ifdef BBB_XPORT_TRACE
-	ptr = (unsigned char *)&csw;
+	ptr = (unsigned char *)csw;
 	for (index = 0; index < UMASS_BBB_CSW_SIZE; index++)
 		printf("ptr[%d] %#x ", index, ptr[index]);
 	printf("\n");
 #endif
 	/* misuse pipe to get the residue */
-	pipe = le32_to_cpu(csw.dCSWDataResidue);
+	pipe = le32_to_cpu(csw->dCSWDataResidue);
 	if (pipe == 0 && srb->datalen != 0 && srb->datalen - data_actlen != 0)
 		pipe = srb->datalen - data_actlen;
-	if (CSWSIGNATURE != le32_to_cpu(csw.dCSWSignature)) {
+	if (CSWSIGNATURE != le32_to_cpu(csw->dCSWSignature)) {
 		USB_STOR_PRINTF("!CSWSIGNATURE\n");
 		usb_stor_BBB_reset(us);
 		return USB_STOR_TRANSPORT_FAILED;
-	} else if ((CBWTag - 1) != le32_to_cpu(csw.dCSWTag)) {
+	} else if ((CBWTag - 1) != le32_to_cpu(csw->dCSWTag)) {
 		USB_STOR_PRINTF("!Tag\n");
 		usb_stor_BBB_reset(us);
 		return USB_STOR_TRANSPORT_FAILED;
-	} else if (csw.bCSWStatus > CSWSTATUS_PHASE) {
+	} else if (csw->bCSWStatus > CSWSTATUS_PHASE) {
 		USB_STOR_PRINTF(">PHASE\n");
 		usb_stor_BBB_reset(us);
 		return USB_STOR_TRANSPORT_FAILED;
-	} else if (csw.bCSWStatus == CSWSTATUS_PHASE) {
+	} else if (csw->bCSWStatus == CSWSTATUS_PHASE) {
 		USB_STOR_PRINTF("=PHASE\n");
 		usb_stor_BBB_reset(us);
 		return USB_STOR_TRANSPORT_FAILED;
@@ -782,7 +778,7 @@ again:
 		USB_STOR_PRINTF("transferred %dB instead of %ldB\n",
 			data_actlen, srb->datalen);
 		return USB_STOR_TRANSPORT_FAILED;
-	} else if (csw.bCSWStatus == CSWSTATUS_FAILED) {
+	} else if (csw->bCSWStatus == CSWSTATUS_FAILED) {
 		USB_STOR_PRINTF("FAILED\n");
 		return USB_STOR_TRANSPORT_FAILED;
 	}
@@ -1343,7 +1339,8 @@ int usb_stor_get_info(struct usb_device *dev, struct us_data *ss,
 		      block_dev_desc_t *dev_desc)
 {
 	unsigned char perq, modi;
-	unsigned long cap[2];
+	ALLOC_CACHE_ALIGN_BUFFER(unsigned long, cap, 2);
+	ALLOC_CACHE_ALIGN_BUFFER(unsigned char, usb_stor_buf, 36);
 	unsigned long *capacity, *blksz;
 	ccb *pccb = &usb_ccb;
 
@@ -1367,9 +1364,9 @@ int usb_stor_get_info(struct usb_device *dev, struct us_data *ss,
 		/* drive is removable */
 		dev_desc->removable = 1;
 	}
-	memcpy(&dev_desc->vendor[0], &usb_stor_buf[8], 8);
-	memcpy(&dev_desc->product[0], &usb_stor_buf[16], 16);
-	memcpy(&dev_desc->revision[0], &usb_stor_buf[32], 4);
+	memcpy(&dev_desc->vendor[0], (const void *) &usb_stor_buf[8], 8);
+	memcpy(&dev_desc->product[0], (const void *) &usb_stor_buf[16], 16);
+	memcpy(&dev_desc->revision[0], (const void *) &usb_stor_buf[32], 4);
 	dev_desc->vendor[8] = 0;
 	dev_desc->product[16] = 0;
 	dev_desc->revision[4] = 0;

drivers/usb/gadget/composite.c

@@ -0,0 +1,1082 @@
+/*
+ * composite.c - infrastructure for Composite USB Gadgets
+ *
+ * Copyright (C) 2006-2008 David Brownell
+ * U-boot porting: Lukasz Majewski <l.majewski@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#undef DEBUG
+
+#include <linux/bitops.h>
+#include <linux/usb/composite.h>
+
+#define USB_BUFSIZ	4096
+
+static struct usb_composite_driver *composite;
+
+/**
+ * usb_add_function() - add a function to a configuration
+ * @config: the configuration
+ * @function: the function being added
+ * Context: single threaded during gadget setup
+ *
+ * After initialization, each configuration must have one or more
+ * functions added to it.  Adding a function involves calling its @bind()
+ * method to allocate resources such as interface and string identifiers
+ * and endpoints.
+ *
+ * This function returns the value of the function's bind(), which is
+ * zero for success else a negative errno value.
+ */
+int usb_add_function(struct usb_configuration *config,
+		struct usb_function *function)
+{
+	int	value = -EINVAL;
+
+	debug("adding '%s'/%p to config '%s'/%p\n",
+			function->name, function,
+			config->label, config);
+
+	if (!function->set_alt || !function->disable)
+		goto done;
+
+	function->config = config;
+	list_add_tail(&function->list, &config->functions);
+
+	if (function->bind) {
+		value = function->bind(config, function);
+		if (value < 0) {
+			list_del(&function->list);
+			function->config = NULL;
+		}
+	} else
+		value = 0;
+
+	if (!config->fullspeed && function->descriptors)
+		config->fullspeed = 1;
+	if (!config->highspeed && function->hs_descriptors)
+		config->highspeed = 1;
+
+done:
+	if (value)
+		debug("adding '%s'/%p --> %d\n",
+				function->name, function, value);
+	return value;
+}
+
+/**
+ * usb_function_deactivate - prevent function and gadget enumeration
+ * @function: the function that isn't yet ready to respond
+ *
+ * Blocks response of the gadget driver to host enumeration by
+ * preventing the data line pullup from being activated.  This is
+ * normally called during @bind() processing to change from the
+ * initial "ready to respond" state, or when a required resource
+ * becomes available.
+ *
+ * For example, drivers that serve as a passthrough to a userspace
+ * daemon can block enumeration unless that daemon (such as an OBEX,
+ * MTP, or print server) is ready to handle host requests.
+ *
+ * Not all systems support software control of their USB peripheral
+ * data pullups.
+ *
+ * Returns zero on success, else negative errno.
+ */
+int usb_function_deactivate(struct usb_function *function)
+{
+	struct usb_composite_dev	*cdev = function->config->cdev;
+	int				status = 0;
+
+	if (cdev->deactivations == 0)
+		status = usb_gadget_disconnect(cdev->gadget);
+	if (status == 0)
+		cdev->deactivations++;
+
+	return status;
+}
+
+/**
+ * usb_function_activate - allow function and gadget enumeration
+ * @function: function on which usb_function_activate() was called
+ *
+ * Reverses effect of usb_function_deactivate().  If no more functions
+ * are delaying their activation, the gadget driver will respond to
+ * host enumeration procedures.
+ *
+ * Returns zero on success, else negative errno.
+ */
+int usb_function_activate(struct usb_function *function)
+{
+	struct usb_composite_dev	*cdev = function->config->cdev;
+	int				status = 0;
+
+	if (cdev->deactivations == 0)
+		status = -EINVAL;
+	else {
+		cdev->deactivations--;
+		if (cdev->deactivations == 0)
+			status = usb_gadget_connect(cdev->gadget);
+	}
+
+	return status;
+}
+
+/**
+ * usb_interface_id() - allocate an unused interface ID
+ * @config: configuration associated with the interface
+ * @function: function handling the interface
+ * Context: single threaded during gadget setup
+ *
+ * usb_interface_id() is called from usb_function.bind() callbacks to
+ * allocate new interface IDs.  The function driver will then store that
+ * ID in interface, association, CDC union, and other descriptors.  It
+ * will also handle any control requests targetted at that interface,
+ * particularly changing its altsetting via set_alt().  There may
+ * also be class-specific or vendor-specific requests to handle.
+ *
+ * All interface identifier should be allocated using this routine, to
+ * ensure that for example different functions don't wrongly assign
+ * different meanings to the same identifier.  Note that since interface
+ * identifers are configuration-specific, functions used in more than
+ * one configuration (or more than once in a given configuration) need
+ * multiple versions of the relevant descriptors.
+ *
+ * Returns the interface ID which was allocated; or -ENODEV if no
+ * more interface IDs can be allocated.
+ */
+int usb_interface_id(struct usb_configuration *config,
+		struct usb_function *function)
+{
+	unsigned char id = config->next_interface_id;
+
+	if (id < MAX_CONFIG_INTERFACES) {
+		config->interface[id] = function;
+		config->next_interface_id = id + 1;
+		return id;
+	}
+	return -ENODEV;
+}
+
+static int config_buf(struct usb_configuration *config,
+		enum usb_device_speed speed, void *buf, u8 type)
+{
+	int				len = USB_BUFSIZ - USB_DT_CONFIG_SIZE;
+	void				*next = buf + USB_DT_CONFIG_SIZE;
+	struct usb_descriptor_header    **descriptors;
+	struct usb_config_descriptor	*c = buf;
+	int				status;
+	struct usb_function		*f;
+
+	/* write the config descriptor */
+	c = buf;
+	c->bLength = USB_DT_CONFIG_SIZE;
+	c->bDescriptorType = type;
+
+	c->bNumInterfaces = config->next_interface_id;
+	c->bConfigurationValue = config->bConfigurationValue;
+	c->iConfiguration = config->iConfiguration;
+	c->bmAttributes = USB_CONFIG_ATT_ONE | config->bmAttributes;
+	c->bMaxPower = config->bMaxPower ? : (CONFIG_USB_GADGET_VBUS_DRAW / 2);
+
+	/* There may be e.g. OTG descriptors */
+	if (config->descriptors) {
+		status = usb_descriptor_fillbuf(next, len,
+				config->descriptors);
+		if (status < 0)
+			return status;
+		len -= status;
+		next += status;
+	}
+
+	/* add each function's descriptors */
+	list_for_each_entry(f, &config->functions, list) {
+		if (speed == USB_SPEED_HIGH)
+			descriptors = f->hs_descriptors;
+		else
+			descriptors = f->descriptors;
+		if (!descriptors)
+			continue;
+		status = usb_descriptor_fillbuf(next, len,
+			(const struct usb_descriptor_header **) descriptors);
+		if (status < 0)
+			return status;
+		len -= status;
+		next += status;
+	}
+
+	len = next - buf;
+	c->wTotalLength = cpu_to_le16(len);
+	return len;
+}
+
+static int config_desc(struct usb_composite_dev *cdev, unsigned w_value)
+{
+	enum usb_device_speed		speed = USB_SPEED_UNKNOWN;
+	struct usb_gadget		*gadget = cdev->gadget;
+	u8				type = w_value >> 8;
+	int                             hs = 0;
+	struct usb_configuration	*c;
+
+	if (gadget_is_dualspeed(gadget)) {
+		if (gadget->speed == USB_SPEED_HIGH)
+			hs = 1;
+		if (type == USB_DT_OTHER_SPEED_CONFIG)
+			hs = !hs;
+		if (hs)
+			speed = USB_SPEED_HIGH;
+	}
+
+	w_value &= 0xff;
+	list_for_each_entry(c, &cdev->configs, list) {
+		if (speed == USB_SPEED_HIGH) {
+			if (!c->highspeed)
+				continue;
+		} else {
+			if (!c->fullspeed)
+				continue;
+		}
+		if (w_value == 0)
+			return config_buf(c, speed, cdev->req->buf, type);
+		w_value--;
+	}
+	return -EINVAL;
+}
+
+static int count_configs(struct usb_composite_dev *cdev, unsigned type)
+{
+	struct usb_gadget		*gadget = cdev->gadget;
+	unsigned			count = 0;
+	int				hs = 0;
+	struct usb_configuration	*c;
+
+	if (gadget_is_dualspeed(gadget)) {
+		if (gadget->speed == USB_SPEED_HIGH)
+			hs = 1;
+		if (type == USB_DT_DEVICE_QUALIFIER)
+			hs = !hs;
+	}
+	list_for_each_entry(c, &cdev->configs, list) {
+		/* ignore configs that won't work at this speed */
+		if (hs) {
+			if (!c->highspeed)
+				continue;
+		} else {
+			if (!c->fullspeed)
+				continue;
+		}
+		count++;
+	}
+	return count;
+}
+
+static void device_qual(struct usb_composite_dev *cdev)
+{
+	struct usb_qualifier_descriptor	*qual = cdev->req->buf;
+
+	qual->bLength = sizeof(*qual);
+	qual->bDescriptorType = USB_DT_DEVICE_QUALIFIER;
+	/* POLICY: same bcdUSB and device type info at both speeds */
+	qual->bcdUSB = cdev->desc.bcdUSB;
+	qual->bDeviceClass = cdev->desc.bDeviceClass;
+	qual->bDeviceSubClass = cdev->desc.bDeviceSubClass;
+	qual->bDeviceProtocol = cdev->desc.bDeviceProtocol;
+	/* ASSUME same EP0 fifo size at both speeds */
+	qual->bMaxPacketSize0 = cdev->desc.bMaxPacketSize0;
+	qual->bNumConfigurations = count_configs(cdev, USB_DT_DEVICE_QUALIFIER);
+	qual->bRESERVED = 0;
+}
+
+static void reset_config(struct usb_composite_dev *cdev)
+{
+	struct usb_function		*f;
+
+	debug("%s:\n", __func__);
+
+	list_for_each_entry(f, &cdev->config->functions, list) {
+		if (f->disable)
+			f->disable(f);
+
+		bitmap_zero(f->endpoints, 32);
+	}
+	cdev->config = NULL;
+}
+
+static int set_config(struct usb_composite_dev *cdev,
+		const struct usb_ctrlrequest *ctrl, unsigned number)
+{
+	struct usb_gadget	*gadget = cdev->gadget;
+	unsigned		power = gadget_is_otg(gadget) ? 8 : 100;
+	struct usb_descriptor_header **descriptors;
+	int			result = -EINVAL;
+	struct usb_endpoint_descriptor *ep;
+	struct usb_configuration *c = NULL;
+	int                     addr;
+	int			tmp;
+	struct usb_function	*f;
+
+	if (cdev->config)
+		reset_config(cdev);
+
+	if (number) {
+		list_for_each_entry(c, &cdev->configs, list) {
+			if (c->bConfigurationValue == number) {
+				result = 0;
+				break;
+			}
+		}
+		if (result < 0)
+			goto done;
+	} else
+		result = 0;
+
+	debug("%s: %s speed config #%d: %s\n", __func__,
+	     ({ char *speed;
+		     switch (gadget->speed) {
+		     case USB_SPEED_LOW:
+			     speed = "low";
+			     break;
+		     case USB_SPEED_FULL:
+			     speed = "full";
+			     break;
+		     case USB_SPEED_HIGH:
+			     speed = "high";
+			     break;
+		     default:
+			     speed = "?";
+			     break;
+		     };
+		     speed;
+	     }), number, c ? c->label : "unconfigured");
+
+	if (!c)
+		goto done;
+
+	cdev->config = c;
+
+	/* Initialize all interfaces by setting them to altsetting zero. */
+	for (tmp = 0; tmp < MAX_CONFIG_INTERFACES; tmp++) {
+		f = c->interface[tmp];
+		if (!f)
+			break;
+
+		/*
+		 * Record which endpoints are used by the function. This is used
+		 * to dispatch control requests targeted at that endpoint to the
+		 * function's setup callback instead of the current
+		 * configuration's setup callback.
+		 */
+		if (gadget->speed == USB_SPEED_HIGH)
+			descriptors = f->hs_descriptors;
+		else
+			descriptors = f->descriptors;
+
+		for (; *descriptors; ++descriptors) {
+			if ((*descriptors)->bDescriptorType != USB_DT_ENDPOINT)
+				continue;
+
+			ep = (struct usb_endpoint_descriptor *)*descriptors;
+			addr = ((ep->bEndpointAddress & 0x80) >> 3)
+			     |	(ep->bEndpointAddress & 0x0f);
+			__set_bit(addr, f->endpoints);
+		}
+
+		result = f->set_alt(f, tmp, 0);
+		if (result < 0) {
+			debug("interface %d (%s/%p) alt 0 --> %d\n",
+					tmp, f->name, f, result);
+
+			reset_config(cdev);
+			goto done;
+		}
+	}
+
+	/* when we return, be sure our power usage is valid */
+	power = c->bMaxPower ? (2 * c->bMaxPower) : CONFIG_USB_GADGET_VBUS_DRAW;
+done:
+	usb_gadget_vbus_draw(gadget, power);
+	return result;
+}
+
+/**
+ * usb_add_config() - add a configuration to a device.
+ * @cdev: wraps the USB gadget
+ * @config: the configuration, with bConfigurationValue assigned
+ * Context: single threaded during gadget setup
+ *
+ * One of the main tasks of a composite driver's bind() routine is to
+ * add each of the configurations it supports, using this routine.
+ *
+ * This function returns the value of the configuration's bind(), which
+ * is zero for success else a negative errno value.  Binding configurations
+ * assigns global resources including string IDs, and per-configuration
+ * resources such as interface IDs and endpoints.
+ */
+int usb_add_config(struct usb_composite_dev *cdev,
+		struct usb_configuration *config)
+{
+	int				status = -EINVAL;
+	struct usb_configuration	*c;
+	struct usb_function		*f;
+	unsigned int			i;
+
+	debug("%s: adding config #%u '%s'/%p\n", __func__,
+			config->bConfigurationValue,
+			config->label, config);
+
+	if (!config->bConfigurationValue || !config->bind)
+		goto done;
+
+	/* Prevent duplicate configuration identifiers */
+	list_for_each_entry(c, &cdev->configs, list) {
+		if (c->bConfigurationValue == config->bConfigurationValue) {
+			status = -EBUSY;
+			goto done;
+		}
+	}
+
+	config->cdev = cdev;
+	list_add_tail(&config->list, &cdev->configs);
+
+	INIT_LIST_HEAD(&config->functions);
+	config->next_interface_id = 0;
+
+	status = config->bind(config);
+	if (status < 0) {
+		list_del(&config->list);
+		config->cdev = NULL;
+	} else {
+		debug("cfg %d/%p speeds:%s%s\n",
+			config->bConfigurationValue, config,
+			config->highspeed ? " high" : "",
+			config->fullspeed
+				? (gadget_is_dualspeed(cdev->gadget)
+					? " full"
+					: " full/low")
+				: "");
+
+		for (i = 0; i < MAX_CONFIG_INTERFACES; i++) {
+			f = config->interface[i];
+			if (!f)
+				continue;
+			debug("%s: interface %d = %s/%p\n",
+			      __func__, i, f->name, f);
+		}
+	}
+
+	usb_ep_autoconfig_reset(cdev->gadget);
+
+done:
+	if (status)
+		debug("added config '%s'/%u --> %d\n", config->label,
+				config->bConfigurationValue, status);
+	return status;
+}
+
+/*
+ * We support strings in multiple languages ... string descriptor zero
+ * says which languages are supported.	The typical case will be that
+ * only one language (probably English) is used, with I18N handled on
+ * the host side.
+ */
+
+static void collect_langs(struct usb_gadget_strings **sp, __le16 *buf)
+{
+	const struct usb_gadget_strings	*s;
+	u16				language;
+	__le16				*tmp;
+
+	while (*sp) {
+		s = *sp;
+		language = cpu_to_le16(s->language);
+		for (tmp = buf; *tmp && tmp < &buf[126]; tmp++) {
+			if (*tmp == language)
+				goto repeat;
+		}
+		*tmp++ = language;
+repeat:
+		sp++;
+	}
+}
+
+static int lookup_string(
+	struct usb_gadget_strings	**sp,
+	void				*buf,
+	u16				language,
+	int				id
+)
+{
+	int				value;
+	struct usb_gadget_strings	*s;
+
+	while (*sp) {
+		s = *sp++;
+		if (s->language != language)
+			continue;
+		value = usb_gadget_get_string(s, id, buf);
+		if (value > 0)
+			return value;
+	}
+	return -EINVAL;
+}
+
+static int get_string(struct usb_composite_dev *cdev,
+		void *buf, u16 language, int id)
+{
+	struct usb_string_descriptor	*s = buf;
+	struct usb_gadget_strings	**sp;
+	int				len;
+	struct usb_configuration	*c;
+	struct usb_function		*f;
+
+	/*
+	 * Yes, not only is USB's I18N support probably more than most
+	 * folk will ever care about ... also, it's all supported here.
+	 * (Except for UTF8 support for Unicode's "Astral Planes".)
+	 */
+
+	/* 0 == report all available language codes */
+	if (id == 0) {
+		memset(s, 0, 256);
+		s->bDescriptorType = USB_DT_STRING;
+
+		sp = composite->strings;
+		if (sp)
+			collect_langs(sp, s->wData);
+
+		list_for_each_entry(c, &cdev->configs, list) {
+			sp = c->strings;
+			if (sp)
+				collect_langs(sp, s->wData);
+
+			list_for_each_entry(f, &c->functions, list) {
+				sp = f->strings;
+				if (sp)
+					collect_langs(sp, s->wData);
+			}
+		}
+
+		for (len = 0; len <= 126 && s->wData[len]; len++)
+			continue;
+		if (!len)
+			return -EINVAL;
+
+		s->bLength = 2 * (len + 1);
+		return s->bLength;
+	}
+
+	/*
+	 * Otherwise, look up and return a specified string.  String IDs
+	 * are device-scoped, so we look up each string table we're told
+	 * about.  These lookups are infrequent; simpler-is-better here.
+	 */
+	if (composite->strings) {
+		len = lookup_string(composite->strings, buf, language, id);
+		if (len > 0)
+			return len;
+	}
+	list_for_each_entry(c, &cdev->configs, list) {
+		if (c->strings) {
+			len = lookup_string(c->strings, buf, language, id);
+			if (len > 0)
+				return len;
+		}
+		list_for_each_entry(f, &c->functions, list) {
+			if (!f->strings)
+				continue;
+			len = lookup_string(f->strings, buf, language, id);
+			if (len > 0)
+				return len;
+		}
+	}
+	return -EINVAL;
+}
+
+/**
+ * usb_string_id() - allocate an unused string ID
+ * @cdev: the device whose string descriptor IDs are being allocated
+ * Context: single threaded during gadget setup
+ *
+ * @usb_string_id() is called from bind() callbacks to allocate
+ * string IDs.	Drivers for functions, configurations, or gadgets will
+ * then store that ID in the appropriate descriptors and string table.
+ *
+ * All string identifier should be allocated using this,
+ * @usb_string_ids_tab() or @usb_string_ids_n() routine, to ensure
+ * that for example different functions don't wrongly assign different
+ * meanings to the same identifier.
+ */
+int usb_string_id(struct usb_composite_dev *cdev)
+{
+	if (cdev->next_string_id < 254) {
+		/*
+		 * string id 0 is reserved by USB spec for list of
+		 * supported languages
+		 * 255 reserved as well? -- mina86
+		 */
+		cdev->next_string_id++;
+		return cdev->next_string_id;
+	}
+	return -ENODEV;
+}
+
+/**
+ * usb_string_ids() - allocate unused string IDs in batch
+ * @cdev: the device whose string descriptor IDs are being allocated
+ * @str: an array of usb_string objects to assign numbers to
+ * Context: single threaded during gadget setup
+ *
+ * @usb_string_ids() is called from bind() callbacks to allocate
+ * string IDs.	Drivers for functions, configurations, or gadgets will
+ * then copy IDs from the string table to the appropriate descriptors
+ * and string table for other languages.
+ *
+ * All string identifier should be allocated using this,
+ * @usb_string_id() or @usb_string_ids_n() routine, to ensure that for
+ * example different functions don't wrongly assign different meanings
+ * to the same identifier.
+ */
+int usb_string_ids_tab(struct usb_composite_dev *cdev, struct usb_string *str)
+{
+	u8 next = cdev->next_string_id;
+
+	for (; str->s; ++str) {
+		if (next >= 254)
+			return -ENODEV;
+		str->id = ++next;
+	}
+
+	cdev->next_string_id = next;
+
+	return 0;
+}
+
+/**
+ * usb_string_ids_n() - allocate unused string IDs in batch
+ * @c: the device whose string descriptor IDs are being allocated
+ * @n: number of string IDs to allocate
+ * Context: single threaded during gadget setup
+ *
+ * Returns the first requested ID.  This ID and next @n-1 IDs are now
+ * valid IDs.  At least provided that @n is non-zero because if it
+ * is, returns last requested ID which is now very useful information.
+ *
+ * @usb_string_ids_n() is called from bind() callbacks to allocate
+ * string IDs.	Drivers for functions, configurations, or gadgets will
+ * then store that ID in the appropriate descriptors and string table.
+ *
+ * All string identifier should be allocated using this,
+ * @usb_string_id() or @usb_string_ids_n() routine, to ensure that for
+ * example different functions don't wrongly assign different meanings
+ * to the same identifier.
+ */
+int usb_string_ids_n(struct usb_composite_dev *c, unsigned n)
+{
+	u8 next = c->next_string_id;
+
+	if (n > 254 || next + n > 254)
+		return -ENODEV;
+
+	c->next_string_id += n;
+	return next + 1;
+}
+
+static void composite_setup_complete(struct usb_ep *ep, struct usb_request *req)
+{
+	if (req->status || req->actual != req->length)
+		debug("%s: setup complete --> %d, %d/%d\n", __func__,
+				req->status, req->actual, req->length);
+}
+
+/*
+ * The setup() callback implements all the ep0 functionality that's
+ * not handled lower down, in hardware or the hardware driver(like
+ * device and endpoint feature flags, and their status).  It's all
+ * housekeeping for the gadget function we're implementing.  Most of
+ * the work is in config and function specific setup.
+ */
+static int
+composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
+{
+	u16				w_length = le16_to_cpu(ctrl->wLength);
+	u16				w_index = le16_to_cpu(ctrl->wIndex);
+	u16				w_value = le16_to_cpu(ctrl->wValue);
+	struct usb_composite_dev	*cdev = get_gadget_data(gadget);
+	u8				intf = w_index & 0xFF;
+	int				value = -EOPNOTSUPP;
+	struct usb_request		*req = cdev->req;
+	struct usb_function		*f = NULL;
+	int				standard;
+	u8				endp;
+	struct usb_configuration	*c;
+
+	/*
+	 * partial re-init of the response message; the function or the
+	 * gadget might need to intercept e.g. a control-OUT completion
+	 * when we delegate to it.
+	 */
+	req->zero = 0;
+	req->complete = composite_setup_complete;
+	req->length = USB_BUFSIZ;
+	gadget->ep0->driver_data = cdev;
+	standard = (ctrl->bRequestType & USB_TYPE_MASK)
+						== USB_TYPE_STANDARD;
+	if (!standard)
+		goto unknown;
+
+	switch (ctrl->bRequest) {
+
+	/* we handle all standard USB descriptors */
+	case USB_REQ_GET_DESCRIPTOR:
+		if (ctrl->bRequestType != USB_DIR_IN)
+			goto unknown;
+		switch (w_value >> 8) {
+
+		case USB_DT_DEVICE:
+			cdev->desc.bNumConfigurations =
+				count_configs(cdev, USB_DT_DEVICE);
+			value = min(w_length, (u16) sizeof cdev->desc);
+			memcpy(req->buf, &cdev->desc, value);
+			break;
+		case USB_DT_DEVICE_QUALIFIER:
+			if (!gadget_is_dualspeed(gadget))
+				break;
+			device_qual(cdev);
+			value = min(w_length,
+				sizeof(struct usb_qualifier_descriptor));
+			break;
+		case USB_DT_OTHER_SPEED_CONFIG:
+			if (!gadget_is_dualspeed(gadget))
+				break;
+
+		case USB_DT_CONFIG:
+			value = config_desc(cdev, w_value);
+			if (value >= 0)
+				value = min(w_length, (u16) value);
+			break;
+		case USB_DT_STRING:
+			value = get_string(cdev, req->buf,
+					w_index, w_value & 0xff);
+			if (value >= 0)
+				value = min(w_length, (u16) value);
+			break;
+		default:
+			goto unknown;
+		}
+		break;
+
+	/* any number of configs can work */
+	case USB_REQ_SET_CONFIGURATION:
+		if (ctrl->bRequestType != 0)
+			goto unknown;
+		if (gadget_is_otg(gadget)) {
+			if (gadget->a_hnp_support)
+				debug("HNP available\n");
+			else if (gadget->a_alt_hnp_support)
+				debug("HNP on another port\n");
+			else
+				debug("HNP inactive\n");
+		}
+
+		value = set_config(cdev, ctrl, w_value);
+		break;
+	case USB_REQ_GET_CONFIGURATION:
+		if (ctrl->bRequestType != USB_DIR_IN)
+			goto unknown;
+		if (cdev->config)
+			*(u8 *)req->buf = cdev->config->bConfigurationValue;
+		else
+			*(u8 *)req->buf = 0;
+		value = min(w_length, (u16) 1);
+		break;
+
+	/*
+	 * function drivers must handle get/set altsetting; if there's
+	 * no get() method, we know only altsetting zero works.
+	 */
+	case USB_REQ_SET_INTERFACE:
+		if (ctrl->bRequestType != USB_RECIP_INTERFACE)
+			goto unknown;
+		if (!cdev->config || w_index >= MAX_CONFIG_INTERFACES)
+			break;
+		f = cdev->config->interface[intf];
+		if (!f)
+			break;
+		if (w_value && !f->set_alt)
+			break;
+		value = f->set_alt(f, w_index, w_value);
+		break;
+	case USB_REQ_GET_INTERFACE:
+		if (ctrl->bRequestType != (USB_DIR_IN|USB_RECIP_INTERFACE))
+			goto unknown;
+		if (!cdev->config || w_index >= MAX_CONFIG_INTERFACES)
+			break;
+		f = cdev->config->interface[intf];
+		if (!f)
+			break;
+		/* lots of interfaces only need altsetting zero... */
+		value = f->get_alt ? f->get_alt(f, w_index) : 0;
+		if (value < 0)
+			break;
+		*((u8 *)req->buf) = value;
+		value = min(w_length, (u16) 1);
+		break;
+	default:
+unknown:
+		debug("non-core control req%02x.%02x v%04x i%04x l%d\n",
+			ctrl->bRequestType, ctrl->bRequest,
+			w_value, w_index, w_length);
+
+		/*
+		 * functions always handle their interfaces and endpoints...
+		 * punt other recipients (other, WUSB, ...) to the current
+		 * configuration code.
+		 */
+		switch (ctrl->bRequestType & USB_RECIP_MASK) {
+		case USB_RECIP_INTERFACE:
+			f = cdev->config->interface[intf];
+			break;
+
+		case USB_RECIP_ENDPOINT:
+			endp = ((w_index & 0x80) >> 3) | (w_index & 0x0f);
+			list_for_each_entry(f, &cdev->config->functions, list) {
+				if (test_bit(endp, f->endpoints))
+					break;
+			}
+			if (&f->list == &cdev->config->functions)
+				f = NULL;
+			break;
+		}
+
+		if (f && f->setup)
+			value = f->setup(f, ctrl);
+		else {
+			c = cdev->config;
+			if (c && c->setup)
+				value = c->setup(c, ctrl);
+		}
+
+		goto done;
+	}
+
+	/* respond with data transfer before status phase? */
+	if (value >= 0) {
+		req->length = value;
+		req->zero = value < w_length;
+		value = usb_ep_queue(gadget->ep0, req, GFP_KERNEL);
+		if (value < 0) {
+			debug("ep_queue --> %d\n", value);
+			req->status = 0;
+			composite_setup_complete(gadget->ep0, req);
+		}
+	}
+
+done:
+	/* device either stalls (value < 0) or reports success */
+	return value;
+}
+
+static void composite_disconnect(struct usb_gadget *gadget)
+{
+	struct usb_composite_dev	*cdev = get_gadget_data(gadget);
+
+	if (cdev->config)
+		reset_config(cdev);
+	if (composite->disconnect)
+		composite->disconnect(cdev);
+}
+
+static void composite_unbind(struct usb_gadget *gadget)
+{
+	struct usb_composite_dev	*cdev = get_gadget_data(gadget);
+	struct usb_configuration	*c;
+	struct usb_function		*f;
+
+	/*
+	 * composite_disconnect() must already have been called
+	 * by the underlying peripheral controller driver!
+	 * so there's no i/o concurrency that could affect the
+	 * state protected by cdev->lock.
+	 */
+	BUG_ON(cdev->config);
+
+	while (!list_empty(&cdev->configs)) {
+		c = list_first_entry(&cdev->configs,
+				struct usb_configuration, list);
+		while (!list_empty(&c->functions)) {
+			f = list_first_entry(&c->functions,
+					struct usb_function, list);
+			list_del(&f->list);
+			if (f->unbind) {
+				debug("unbind function '%s'/%p\n",
+						f->name, f);
+				f->unbind(c, f);
+			}
+		}
+		list_del(&c->list);
+		if (c->unbind) {
+			debug("unbind config '%s'/%p\n", c->label, c);
+			c->unbind(c);
+		}
+	}
+	if (composite->unbind)
+		composite->unbind(cdev);
+
+	if (cdev->req) {
+		kfree(cdev->req->buf);
+		usb_ep_free_request(gadget->ep0, cdev->req);
+	}
+	kfree(cdev);
+	set_gadget_data(gadget, NULL);
+
+	composite = NULL;
+}
+
+static int composite_bind(struct usb_gadget *gadget)
+{
+	int				status = -ENOMEM;
+	struct usb_composite_dev	*cdev;
+
+	cdev = calloc(sizeof *cdev, 1);
+	if (!cdev)
+		return status;
+
+	cdev->gadget = gadget;
+	set_gadget_data(gadget, cdev);
+	INIT_LIST_HEAD(&cdev->configs);
+
+	/* preallocate control response and buffer */
+	cdev->req = usb_ep_alloc_request(gadget->ep0, GFP_KERNEL);
+	if (!cdev->req)
+		goto fail;
+	cdev->req->buf = memalign(CONFIG_SYS_CACHELINE_SIZE, USB_BUFSIZ);
+	if (!cdev->req->buf)
+		goto fail;
+	cdev->req->complete = composite_setup_complete;
+	gadget->ep0->driver_data = cdev;
+
+	cdev->bufsiz = USB_BUFSIZ;
+	cdev->driver = composite;
+
+	usb_gadget_set_selfpowered(gadget);
+	usb_ep_autoconfig_reset(cdev->gadget);
+
+	status = composite->bind(cdev);
+	if (status < 0)
+		goto fail;
+
+	cdev->desc = *composite->dev;
+	cdev->desc.bMaxPacketSize0 = gadget->ep0->maxpacket;
+
+	debug("%s: ready\n", composite->name);
+	return 0;
+
+fail:
+	composite_unbind(gadget);
+	return status;
+}
+
+static void
+composite_suspend(struct usb_gadget *gadget)
+{
+	struct usb_composite_dev	*cdev = get_gadget_data(gadget);
+	struct usb_function		*f;
+
+	debug("%s: suspend\n", __func__);
+	if (cdev->config) {
+		list_for_each_entry(f, &cdev->config->functions, list) {
+			if (f->suspend)
+				f->suspend(f);
+		}
+	}
+	if (composite->suspend)
+		composite->suspend(cdev);
+
+	cdev->suspended = 1;
+}
+
+static void
+composite_resume(struct usb_gadget *gadget)
+{
+	struct usb_composite_dev	*cdev = get_gadget_data(gadget);
+	struct usb_function		*f;
+
+	debug("%s: resume\n", __func__);
+	if (composite->resume)
+		composite->resume(cdev);
+	if (cdev->config) {
+		list_for_each_entry(f, &cdev->config->functions, list) {
+			if (f->resume)
+				f->resume(f);
+		}
+	}
+
+	cdev->suspended = 0;
+}
+
+static struct usb_gadget_driver composite_driver = {
+	.speed		= USB_SPEED_HIGH,
+
+	.bind		= composite_bind,
+	.unbind         = composite_unbind,
+
+	.setup		= composite_setup,
+	.disconnect	= composite_disconnect,
+
+	.suspend        = composite_suspend,
+	.resume         = composite_resume,
+};
+
+/**
+ * usb_composite_register() - register a composite driver
+ * @driver: the driver to register
+ * Context: single threaded during gadget setup
+ *
+ * This function is used to register drivers using the composite driver
+ * framework.  The return value is zero, or a negative errno value.
+ * Those values normally come from the driver's @bind method, which does
+ * all the work of setting up the driver to match the hardware.
+ *
+ * On successful return, the gadget is ready to respond to requests from
+ * the host, unless one of its components invokes usb_gadget_disconnect()
+ * while it was binding.  That would usually be done in order to wait for
+ * some userspace participation.
+ */
+int usb_composite_register(struct usb_composite_driver *driver)
+{
+	if (!driver || !driver->dev || !driver->bind || composite)
+		return -EINVAL;
+
+	if (!driver->name)
+		driver->name = "composite";
+	composite = driver;
+
+	return usb_gadget_register_driver(&composite_driver);
+}
+
+/**
+ * usb_composite_unregister() - unregister a composite driver
+ * @driver: the driver to unregister
+ *
+ * This function is used to unregister drivers using the composite
+ * driver framework.
+ */
+void usb_composite_unregister(struct usb_composite_driver *driver)
+{
+	if (composite != driver)
+		return;
+	usb_gadget_unregister_driver(&composite_driver);
+}

drivers/usb/gadget/config.c

@@ -27,6 +27,7 @@
 #include <linux/string.h>
 
 #include <linux/usb/ch9.h>
+#include <usbdescriptors.h>
 #include <linux/usb/gadget.h>
 
 

drivers/usb/gadget/epautoconf.c

@@ -23,6 +23,7 @@
 
 #include <common.h>
 #include <linux/usb/ch9.h>
+#include <usbdescriptors.h>
 #include <asm/errno.h>
 #include <linux/usb/gadget.h>
 #include <asm/unaligned.h>

drivers/usb/gadget/ether.c

@@ -24,6 +24,7 @@
 #include <asm/errno.h>
 #include <linux/netdevice.h>
 #include <linux/usb/ch9.h>
+#include <usbdescriptors.h>
 #include <linux/usb/cdc.h>
 #include <linux/usb/gadget.h>
 #include <net.h>

drivers/usb/gadget/s3c_udc_otg.c

@@ -30,13 +30,14 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  *
  */
-
+#undef DEBUG
 #include <common.h>
 #include <asm/errno.h>
 #include <linux/list.h>
 #include <malloc.h>
 
 #include <linux/usb/ch9.h>
+#include <usbdescriptors.h>
 #include <linux/usb/gadget.h>
 
 #include <asm/byteorder.h>
@@ -53,19 +54,11 @@
 
 #define OTG_DMA_MODE		1
 
-#undef DEBUG_S3C_UDC_SETUP
-#undef DEBUG_S3C_UDC_EP0
-#undef DEBUG_S3C_UDC_ISR
-#undef DEBUG_S3C_UDC_OUT_EP
-#undef DEBUG_S3C_UDC_IN_EP
-#undef DEBUG_S3C_UDC
-
-/* #define DEBUG_S3C_UDC_SETUP */
-/* #define DEBUG_S3C_UDC_EP0 */
-/* #define DEBUG_S3C_UDC_ISR */
-/* #define DEBUG_S3C_UDC_OUT_EP */
-/* #define DEBUG_S3C_UDC_IN_EP */
-/* #define DEBUG_S3C_UDC */
+#define DEBUG_SETUP 0
+#define DEBUG_EP0 0
+#define DEBUG_ISR 0
+#define DEBUG_OUT_EP 0
+#define DEBUG_IN_EP 0
 
 #include <usb/s3c_udc.h>
 
@@ -132,6 +125,19 @@ static void nuke(struct s3c_ep *ep, int status);
 static int s3c_udc_set_halt(struct usb_ep *_ep, int value);
 static void s3c_udc_set_nak(struct s3c_ep *ep);
 
+void set_udc_gadget_private_data(void *p)
+{
+	debug_cond(DEBUG_SETUP != 0,
+		   "%s: the_controller: 0x%p, p: 0x%p\n", __func__,
+		   the_controller, p);
+	the_controller->gadget.dev.device_data = p;
+}
+
+void *get_udc_gadget_private_data(struct usb_gadget *gadget)
+{
+	return gadget->dev.device_data;
+}
+
 static struct usb_ep_ops s3c_ep_ops = {
 	.enable = s3c_ep_enable,
 	.disable = s3c_ep_disable,
@@ -216,7 +222,7 @@ void otg_phy_off(struct s3c_udc *dev)
  */
 static void udc_disable(struct s3c_udc *dev)
 {
-	DEBUG_SETUP("%s: %p\n", __func__, dev);
+	debug_cond(DEBUG_SETUP != 0, "%s: %p\n", __func__, dev);
 
 	udc_set_address(dev, 0);
 
@@ -234,7 +240,7 @@ static void udc_reinit(struct s3c_udc *dev)
 {
 	unsigned int i;
 
-	DEBUG_SETUP("%s: %p\n", __func__, dev);
+	debug_cond(DEBUG_SETUP != 0, "%s: %p\n", __func__, dev);
 
 	/* device/ep0 records init */
 	INIT_LIST_HEAD(&dev->gadget.ep_list);
@@ -265,12 +271,13 @@ static void udc_reinit(struct s3c_udc *dev)
  */
 static int udc_enable(struct s3c_udc *dev)
 {
-	DEBUG_SETUP("%s: %p\n", __func__, dev);
+	debug_cond(DEBUG_SETUP != 0, "%s: %p\n", __func__, dev);
 
 	otg_phy_init(dev);
 	reconfig_usbd();
 
-	DEBUG_SETUP("S3C USB 2.0 OTG Controller Core Initialized : 0x%x\n",
+	debug_cond(DEBUG_SETUP != 0,
+		   "S3C USB 2.0 OTG Controller Core Initialized : 0x%x\n",
 		    readl(&reg->gintmsk));
 
 	dev->gadget.speed = USB_SPEED_UNKNOWN;
@@ -287,7 +294,7 @@ int usb_gadget_register_driver(struct usb_gadget_driver *driver)
 	int retval = 0;
 	unsigned long flags;
 
-	DEBUG_SETUP("%s: %s\n", __func__, "no name");
+	debug_cond(DEBUG_SETUP != 0, "%s: %s\n", __func__, "no name");
 
 	if (!driver
 	    || (driver->speed != USB_SPEED_FULL
@@ -311,7 +318,8 @@ int usb_gadget_register_driver(struct usb_gadget_driver *driver)
 
 	retval = driver->bind(&dev->gadget);
 	if (retval) {
-		DEBUG_SETUP("%s: bind to driver --> error %d\n",
+		debug_cond(DEBUG_SETUP != 0,
+			   "%s: bind to driver --> error %d\n",
 			    dev->gadget.name, retval);
 		dev->driver = 0;
 		return retval;
@@ -319,7 +327,8 @@ int usb_gadget_register_driver(struct usb_gadget_driver *driver)
 
 	enable_irq(IRQ_OTG);
 
-	DEBUG_SETUP("Registered gadget driver %s\n", dev->gadget.name);
+	debug_cond(DEBUG_SETUP != 0,
+		   "Registered gadget driver %s\n", dev->gadget.name);
 	udc_enable(dev);
 
 	return 0;
@@ -377,7 +386,7 @@ static void done(struct s3c_ep *ep, struct s3c_request *req, int status)
 	/* don't modify queue heads during completion callback */
 	ep->stopped = 1;
 
-#ifdef DEBUG_S3C_UDC
+#ifdef DEBUG
 	printf("calling complete callback\n");
 	{
 		int i, len = req->req.length;

drivers/usb/gadget/s3c_udc_otg_xfer_dma.c

@@ -53,7 +53,7 @@ static inline void s3c_udc_ep0_zlp(struct s3c_udc *dev)
 	writel(ep_ctrl|DEPCTL_EPENA|DEPCTL_CNAK,
 	       &reg->in_endp[EP0_CON].diepctl);
 
-	DEBUG_EP0("%s:EP0 ZLP DIEPCTL0 = 0x%x\n",
+	debug_cond(DEBUG_EP0 != 0, "%s:EP0 ZLP DIEPCTL0 = 0x%x\n",
 		__func__, readl(&reg->in_endp[EP0_CON].diepctl));
 	dev->ep0state = WAIT_FOR_IN_COMPLETE;
 }
@@ -62,7 +62,8 @@ void s3c_udc_pre_setup(void)
 {
 	u32 ep_ctrl;
 
-	debug_cond(DEBUG_IN_EP, "%s : Prepare Setup packets.\n", __func__);
+	debug_cond(DEBUG_IN_EP,
+		   "%s : Prepare Setup packets.\n", __func__);
 
 	invalidate_dcache_range((unsigned long) usb_ctrl_dma_addr,
 				(unsigned long) usb_ctrl_dma_addr
@@ -75,9 +76,9 @@ void s3c_udc_pre_setup(void)
 	ep_ctrl = readl(&reg->out_endp[EP0_CON].doepctl);
 	writel(ep_ctrl|DEPCTL_EPENA, &reg->out_endp[EP0_CON].doepctl);
 
-	DEBUG_EP0("%s:EP0 ZLP DIEPCTL0 = 0x%x\n",
+	debug_cond(DEBUG_EP0 != 0, "%s:EP0 ZLP DIEPCTL0 = 0x%x\n",
 		__func__, readl(&reg->in_endp[EP0_CON].diepctl));
-	DEBUG_EP0("%s:EP0 ZLP DOEPCTL0 = 0x%x\n",
+	debug_cond(DEBUG_EP0 != 0, "%s:EP0 ZLP DOEPCTL0 = 0x%x\n",
 		__func__, readl(&reg->out_endp[EP0_CON].doepctl));
 
 }
@@ -86,9 +87,9 @@ static inline void s3c_ep0_complete_out(void)
 {
 	u32 ep_ctrl;
 
-	DEBUG_EP0("%s:EP0 ZLP DIEPCTL0 = 0x%x\n",
+	debug_cond(DEBUG_EP0 != 0, "%s:EP0 ZLP DIEPCTL0 = 0x%x\n",
 		__func__, readl(&reg->in_endp[EP0_CON].diepctl));
-	DEBUG_EP0("%s:EP0 ZLP DOEPCTL0 = 0x%x\n",
+	debug_cond(DEBUG_EP0 != 0, "%s:EP0 ZLP DOEPCTL0 = 0x%x\n",
 		__func__, readl(&reg->out_endp[EP0_CON].doepctl));
 
 	debug_cond(DEBUG_IN_EP,
@@ -106,9 +107,9 @@ static inline void s3c_ep0_complete_out(void)
 	writel(ep_ctrl|DEPCTL_EPENA|DEPCTL_CNAK,
 	       &reg->out_endp[EP0_CON].doepctl);
 
-	DEBUG_EP0("%s:EP0 ZLP DIEPCTL0 = 0x%x\n",
+	debug_cond(DEBUG_EP0 != 0, "%s:EP0 ZLP DIEPCTL0 = 0x%x\n",
 		__func__, readl(&reg->in_endp[EP0_CON].diepctl));
-	DEBUG_EP0("%s:EP0 ZLP DOEPCTL0 = 0x%x\n",
+	debug_cond(DEBUG_EP0 != 0, "%s:EP0 ZLP DOEPCTL0 = 0x%x\n",
 		__func__, readl(&reg->out_endp[EP0_CON].doepctl));
 
 }
@@ -145,14 +146,15 @@ static int setdma_rx(struct s3c_ep *ep, struct s3c_request *req)
 	       &reg->out_endp[ep_num].doeptsiz);
 	writel(DEPCTL_EPENA|DEPCTL_CNAK|ctrl, &reg->out_endp[ep_num].doepctl);
 
-	DEBUG_OUT_EP("%s: EP%d RX DMA start : DOEPDMA = 0x%x,"
-		     "DOEPTSIZ = 0x%x, DOEPCTL = 0x%x\n"
-		     "\tbuf = 0x%p, pktcnt = %d, xfersize = %d\n",
-		     __func__, ep_num,
-		     readl(&reg->out_endp[ep_num].doepdma),
-		     readl(&reg->out_endp[ep_num].doeptsiz),
-		     readl(&reg->out_endp[ep_num].doepctl),
-		     buf, pktcnt, length);
+	debug_cond(DEBUG_OUT_EP != 0,
+		   "%s: EP%d RX DMA start : DOEPDMA = 0x%x,"
+		   "DOEPTSIZ = 0x%x, DOEPCTL = 0x%x\n"
+		   "\tbuf = 0x%p, pktcnt = %d, xfersize = %d\n",
+		   __func__, ep_num,
+		   readl(&reg->out_endp[ep_num].doepdma),
+		   readl(&reg->out_endp[ep_num].doeptsiz),
+		   readl(&reg->out_endp[ep_num].doepctl),
+		   buf, pktcnt, length);
 	return 0;
 
 }
@@ -225,8 +227,9 @@ static void complete_rx(struct s3c_udc *dev, u8 ep_num)
 	u32 *p = the_controller->dma_buf[ep_index(ep)+1];
 
 	if (list_empty(&ep->queue)) {
-		DEBUG_OUT_EP("%s: RX DMA done : NULL REQ on OUT EP-%d\n",
-					__func__, ep_num);
+		debug_cond(DEBUG_OUT_EP != 0,
+			   "%s: RX DMA done : NULL REQ on OUT EP-%d\n",
+			   __func__, ep_num);
 		return;
 
 	}
@@ -249,14 +252,15 @@ static void complete_rx(struct s3c_udc *dev, u8 ep_num)
 	req->req.actual += min(xfer_size, req->req.length - req->req.actual);
 	is_short = (xfer_size < ep->ep.maxpacket);
 
-	DEBUG_OUT_EP("%s: RX DMA done : ep = %d, rx bytes = %d/%d, "
-		     "is_short = %d, DOEPTSIZ = 0x%x, remained bytes = %d\n",
-			__func__, ep_num, req->req.actual, req->req.length,
-			is_short, ep_tsr, xfer_size);
+	debug_cond(DEBUG_OUT_EP != 0,
+		   "%s: RX DMA done : ep = %d, rx bytes = %d/%d, "
+		   "is_short = %d, DOEPTSIZ = 0x%x, remained bytes = %d\n",
+		   __func__, ep_num, req->req.actual, req->req.length,
+		   is_short, ep_tsr, xfer_size);
 
 	if (is_short || req->req.actual == req->req.length) {
 		if (ep_num == EP0_CON && dev->ep0state == DATA_STATE_RECV) {
-			DEBUG_OUT_EP("	=> Send ZLP\n");
+			debug_cond(DEBUG_OUT_EP != 0, "	=> Send ZLP\n");
 			s3c_udc_ep0_zlp(dev);
 			/* packet will be completed in complete_tx() */
 			dev->ep0state = WAIT_FOR_IN_COMPLETE;
@@ -266,8 +270,9 @@ static void complete_rx(struct s3c_udc *dev, u8 ep_num)
 			if (!list_empty(&ep->queue)) {
 				req = list_entry(ep->queue.next,
 					struct s3c_request, queue);
-				DEBUG_OUT_EP("%s: Next Rx request start...\n",
-					 __func__);
+				debug_cond(DEBUG_OUT_EP != 0,
+					   "%s: Next Rx request start...\n",
+					   __func__);
 				setdma_rx(ep, req);
 			}
 		}
@@ -392,8 +397,9 @@ static void process_ep_in_intr(struct s3c_udc *dev)
 	while (ep_intr) {
 		if (ep_intr & DAINT_IN_EP_INT(1)) {
 			ep_intr_status = readl(&reg->in_endp[ep_num].diepint);
-			debug_cond(DEBUG_IN_EP, "\tEP%d-IN : DIEPINT = 0x%x\n",
-						ep_num, ep_intr_status);
+			debug_cond(DEBUG_IN_EP,
+				   "\tEP%d-IN : DIEPINT = 0x%x\n",
+				   ep_num, ep_intr_status);
 
 			/* Interrupt Clear */
 			writel(ep_intr_status, &reg->in_endp[ep_num].diepint);
@@ -430,16 +436,18 @@ static void process_ep_out_intr(struct s3c_udc *dev)
 	u8 ep_num = 0;
 
 	ep_intr = readl(&reg->daint);
-	DEBUG_OUT_EP("*** %s: EP OUT interrupt : DAINT = 0x%x\n",
-				__func__, ep_intr);
+	debug_cond(DEBUG_OUT_EP != 0,
+		   "*** %s: EP OUT interrupt : DAINT = 0x%x\n",
+		   __func__, ep_intr);
 
 	ep_intr = (ep_intr >> DAINT_OUT_BIT) & DAINT_MASK;
 
 	while (ep_intr) {
 		if (ep_intr & 0x1) {
 			ep_intr_status = readl(&reg->out_endp[ep_num].doepint);
-			DEBUG_OUT_EP("\tEP%d-OUT : DOEPINT = 0x%x\n",
-						ep_num, ep_intr_status);
+			debug_cond(DEBUG_OUT_EP != 0,
+				   "\tEP%d-OUT : DOEPINT = 0x%x\n",
+				   ep_num, ep_intr_status);
 
 			/* Interrupt Clear */
 			writel(ep_intr_status, &reg->out_endp[ep_num].doepint);
@@ -457,7 +465,8 @@ static void process_ep_out_intr(struct s3c_udc *dev)
 
 				if (ep_intr_status &
 				    CTRL_OUT_EP_SETUP_PHASE_DONE) {
-					DEBUG_OUT_EP("SETUP packet arrived\n");
+					debug_cond(DEBUG_OUT_EP != 0,
+						   "SETUP packet arrived\n");
 					s3c_handle_ep0(dev);
 				}
 			} else {
@@ -503,7 +512,8 @@ static int s3c_udc_irq(int irq, void *_dev)
 		usb_status = (readl(&reg->dsts) & 0x6);
 
 		if (usb_status & (USB_FULL_30_60MHZ | USB_FULL_48MHZ)) {
-			debug_cond(DEBUG_ISR, "\t\tFull Speed Detection\n");
+			debug_cond(DEBUG_ISR,
+				   "\t\tFull Speed Detection\n");
 			set_max_pktsize(dev, USB_SPEED_FULL);
 
 		} else {
@@ -571,7 +581,8 @@ static int s3c_udc_irq(int irq, void *_dev)
 
 		} else {
 			reset_available = 1;
-			debug_cond(DEBUG_ISR, "\t\tRESET handling skipped\n");
+			debug_cond(DEBUG_ISR,
+				   "\t\tRESET handling skipped\n");
 		}
 	}
 
@@ -635,7 +646,7 @@ static int s3c_queue(struct usb_ep *_ep, struct usb_request *_req,
 		_req, _req->length, _req->buf,
 		list_empty(&ep->queue), ep->stopped);
 
-#ifdef DEBUG_S3C_UDC
+#ifdef DEBUG
 	{
 		int i, len = _req->length;
 
@@ -662,14 +673,15 @@ static int s3c_queue(struct usb_ep *_ep, struct usb_request *_req,
 		} else if (ep_is_in(ep)) {
 			gintsts = readl(&reg->gintsts);
 			debug_cond(DEBUG_IN_EP,
-				"%s: ep_is_in, S3C_UDC_OTG_GINTSTS=0x%x\n",
-				__func__, gintsts);
+				   "%s: ep_is_in, S3C_UDC_OTG_GINTSTS=0x%x\n",
+				   __func__, gintsts);
 
 			setdma_tx(ep, req);
 		} else {
 			gintsts = readl(&reg->gintsts);
-			DEBUG_OUT_EP("%s:ep_is_out, S3C_UDC_OTG_GINTSTS=0x%x\n",
-				__func__, gintsts);
+			debug_cond(DEBUG_OUT_EP != 0,
+				   "%s:ep_is_out, S3C_UDC_OTG_GINTSTS=0x%x\n",
+				   __func__, gintsts);
 
 			setdma_rx(ep, req);
 		}
@@ -697,7 +709,7 @@ static int write_fifo_ep0(struct s3c_ep *ep, struct s3c_request *req)
 
 	max = ep_maxpacket(ep);
 
-	DEBUG_EP0("%s: max = %d\n", __func__, max);
+	debug_cond(DEBUG_EP0 != 0, "%s: max = %d\n", __func__, max);
 
 	count = setdma_tx(ep, req);
 
@@ -712,10 +724,11 @@ static int write_fifo_ep0(struct s3c_ep *ep, struct s3c_request *req)
 			is_last = 1;
 	}
 
-	DEBUG_EP0("%s: wrote %s %d bytes%s %d left %p\n", __func__,
-		  ep->ep.name, count,
-		  is_last ? "/L" : "",
-		  req->req.length - req->req.actual - count, req);
+	debug_cond(DEBUG_EP0 != 0,
+		   "%s: wrote %s %d bytes%s %d left %p\n", __func__,
+		   ep->ep.name, count,
+		   is_last ? "/L" : "",
+		   req->req.length - req->req.actual - count, req);
 
 	/* requests complete when all IN data is in the FIFO */
 	if (is_last) {
@@ -736,8 +749,9 @@ int s3c_fifo_read(struct s3c_ep *ep, u32 *cp, int max)
 				(unsigned long) ep->dev->dma_buf[ep_index(ep)]
 				+ DMA_BUFFER_SIZE);
 
-	DEBUG_EP0("%s: bytes=%d, ep_index=%d %p\n", __func__,
-		  bytes, ep_index(ep), ep->dev->dma_buf[ep_index(ep)]);
+	debug_cond(DEBUG_EP0 != 0,
+		   "%s: bytes=%d, ep_index=%d %p\n", __func__,
+		   bytes, ep_index(ep), ep->dev->dma_buf[ep_index(ep)]);
 
 	return bytes;
 }
@@ -756,8 +770,9 @@ static void udc_set_address(struct s3c_udc *dev, unsigned char address)
 
 	s3c_udc_ep0_zlp(dev);
 
-	DEBUG_EP0("%s: USB OTG 2.0 Device address=%d, DCFG=0x%x\n",
-		__func__, address, readl(&reg->dcfg));
+	debug_cond(DEBUG_EP0 != 0,
+		   "%s: USB OTG 2.0 Device address=%d, DCFG=0x%x\n",
+		   __func__, address, readl(&reg->dcfg));
 
 	dev->usb_address = address;
 }
@@ -778,8 +793,9 @@ static inline void s3c_udc_ep0_set_stall(struct s3c_ep *ep)
 
 	writel(ep_ctrl, &reg->in_endp[EP0_CON].diepctl);
 
-	DEBUG_EP0("%s: set ep%d stall, DIEPCTL0 = 0x%x\n",
-		__func__, ep_index(ep), &reg->in_endp[EP0_CON].diepctl);
+	debug_cond(DEBUG_EP0 != 0,
+		   "%s: set ep%d stall, DIEPCTL0 = 0x%p\n",
+		   __func__, ep_index(ep), &reg->in_endp[EP0_CON].diepctl);
 	/*
 	 * The application can only set this bit, and the core clears it,
 	 * when a SETUP token is received for this endpoint
@@ -803,8 +819,9 @@ static void s3c_ep0_read(struct s3c_udc *dev)
 		return;
 	}
 
-	DEBUG_EP0("%s: req = %p, req.length = 0x%x, req.actual = 0x%x\n",
-		__func__, req, req->req.length, req->req.actual);
+	debug_cond(DEBUG_EP0 != 0,
+		   "%s: req = %p, req.length = 0x%x, req.actual = 0x%x\n",
+		   __func__, req, req->req.length, req->req.actual);
 
 	if (req->req.length == 0) {
 		/* zlp for Set_configuration, Set_interface,
@@ -813,8 +830,9 @@ static void s3c_ep0_read(struct s3c_udc *dev)
 		ep->len = 0;
 		s3c_udc_ep0_zlp(dev);
 
-		DEBUG_EP0("%s: req.length = 0, bRequest = %d\n",
-			  __func__, usb_ctrl->bRequest);
+		debug_cond(DEBUG_EP0 != 0,
+			   "%s: req.length = 0, bRequest = %d\n",
+			   __func__, usb_ctrl->bRequest);
 		return;
 	}
 
@@ -836,12 +854,13 @@ static int s3c_ep0_write(struct s3c_udc *dev)
 		req = list_entry(ep->queue.next, struct s3c_request, queue);
 
 	if (!req) {
-		DEBUG_EP0("%s: NULL REQ\n", __func__);
+		debug_cond(DEBUG_EP0 != 0, "%s: NULL REQ\n", __func__);
 		return 0;
 	}
 
-	DEBUG_EP0("%s: req = %p, req.length = 0x%x, req.actual = 0x%x\n",
-		__func__, req, req->req.length, req->req.actual);
+	debug_cond(DEBUG_EP0 != 0,
+		   "%s: req = %p, req.length = 0x%x, req.actual = 0x%x\n",
+		   __func__, req, req->req.length, req->req.actual);
 
 	if (req->req.length - req->req.actual == ep0_fifo_size) {
 		/* Next write will end with the packet size, */
@@ -854,11 +873,13 @@ static int s3c_ep0_write(struct s3c_udc *dev)
 	if ((ret == 1) && !need_zlp) {
 		/* Last packet */
 		dev->ep0state = WAIT_FOR_COMPLETE;
-		DEBUG_EP0("%s: finished, waiting for status\n", __func__);
+		debug_cond(DEBUG_EP0 != 0,
+			   "%s: finished, waiting for status\n", __func__);
 
 	} else {
 		dev->ep0state = DATA_STATE_XMIT;
-		DEBUG_EP0("%s: not finished\n", __func__);
+		debug_cond(DEBUG_EP0 != 0,
+			   "%s: not finished\n", __func__);
 	}
 
 	return 1;
@@ -873,30 +894,35 @@ int s3c_udc_get_status(struct s3c_udc *dev,
 	u32 ep_ctrl;
 	u32 *p = the_controller->dma_buf[1];
 
-	DEBUG_SETUP("%s: *** USB_REQ_GET_STATUS\n", __func__);
+	debug_cond(DEBUG_SETUP != 0,
+		   "%s: *** USB_REQ_GET_STATUS\n", __func__);
 	printf("crq->brequest:0x%x\n", crq->bRequestType & USB_RECIP_MASK);
 	switch (crq->bRequestType & USB_RECIP_MASK) {
 	case USB_RECIP_INTERFACE:
 		g_status = 0;
-		DEBUG_SETUP("\tGET_STATUS:USB_RECIP_INTERFACE, g_stauts = %d\n",
-			    g_status);
+		debug_cond(DEBUG_SETUP != 0,
+			   "\tGET_STATUS:USB_RECIP_INTERFACE, g_stauts = %d\n",
+			   g_status);
 		break;
 
 	case USB_RECIP_DEVICE:
 		g_status = 0x1; /* Self powered */
-		DEBUG_SETUP("\tGET_STATUS: USB_RECIP_DEVICE, g_stauts = %d\n",
-			    g_status);
+		debug_cond(DEBUG_SETUP != 0,
+			   "\tGET_STATUS: USB_RECIP_DEVICE, g_stauts = %d\n",
+			   g_status);
 		break;
 
 	case USB_RECIP_ENDPOINT:
 		if (crq->wLength > 2) {
-			DEBUG_SETUP("\tGET_STATUS:Not support EP or wLength\n");
+			debug_cond(DEBUG_SETUP != 0,
+				   "\tGET_STATUS:Not support EP or wLength\n");
 			return 1;
 		}
 
 		g_status = dev->ep[ep_num].stopped;
-		DEBUG_SETUP("\tGET_STATUS: USB_RECIP_ENDPOINT, g_stauts = %d\n",
-			    g_status);
+		debug_cond(DEBUG_SETUP != 0,
+			   "\tGET_STATUS: USB_RECIP_ENDPOINT, g_stauts = %d\n",
+			   g_status);
 
 		break;
 
@@ -1134,11 +1160,13 @@ static int s3c_udc_clear_feature(struct usb_ep *_ep)
 	ep_num = ep_index(ep);
 
 	dev = ep->dev;
-	DEBUG_SETUP("%s: ep_num = %d, is_in = %d, clear_feature_flag = %d\n",
-		__func__, ep_num, ep_is_in(ep), clear_feature_flag);
+	debug_cond(DEBUG_SETUP != 0,
+		   "%s: ep_num = %d, is_in = %d, clear_feature_flag = %d\n",
+		   __func__, ep_num, ep_is_in(ep), clear_feature_flag);
 
 	if (usb_ctrl->wLength != 0) {
-		DEBUG_SETUP("\tCLEAR_FEATURE: wLength is not zero.....\n");
+		debug_cond(DEBUG_SETUP != 0,
+			   "\tCLEAR_FEATURE: wLength is not zero.....\n");
 		return 1;
 	}
 
@@ -1146,11 +1174,13 @@ static int s3c_udc_clear_feature(struct usb_ep *_ep)
 	case USB_RECIP_DEVICE:
 		switch (usb_ctrl->wValue) {
 		case USB_DEVICE_REMOTE_WAKEUP:
-			DEBUG_SETUP("\tOFF:USB_DEVICE_REMOTE_WAKEUP\n");
+			debug_cond(DEBUG_SETUP != 0,
+				   "\tOFF:USB_DEVICE_REMOTE_WAKEUP\n");
 			break;
 
 		case USB_DEVICE_TEST_MODE:
-			DEBUG_SETUP("\tCLEAR_FEATURE: USB_DEVICE_TEST_MODE\n");
+			debug_cond(DEBUG_SETUP != 0,
+				   "\tCLEAR_FEATURE: USB_DEVICE_TEST_MODE\n");
 			/** @todo Add CLEAR_FEATURE for TEST modes. */
 			break;
 		}
@@ -1159,8 +1189,9 @@ static int s3c_udc_clear_feature(struct usb_ep *_ep)
 		break;
 
 	case USB_RECIP_ENDPOINT:
-		DEBUG_SETUP("\tCLEAR_FEATURE:USB_RECIP_ENDPOINT, wValue = %d\n",
-				usb_ctrl->wValue);
+		debug_cond(DEBUG_SETUP != 0,
+			   "\tCLEAR_FEATURE:USB_RECIP_ENDPOINT, wValue = %d\n",
+			   usb_ctrl->wValue);
 
 		if (usb_ctrl->wValue == USB_ENDPOINT_HALT) {
 			if (ep_num == 0) {
@@ -1193,11 +1224,13 @@ static int s3c_udc_set_feature(struct usb_ep *_ep)
 	ep_num = ep_index(ep);
 	dev = ep->dev;
 
-	DEBUG_SETUP("%s: *** USB_REQ_SET_FEATURE , ep_num = %d\n",
+	debug_cond(DEBUG_SETUP != 0,
+		   "%s: *** USB_REQ_SET_FEATURE , ep_num = %d\n",
 		    __func__, ep_num);
 
 	if (usb_ctrl->wLength != 0) {
-		DEBUG_SETUP("\tSET_FEATURE: wLength is not zero.....\n");
+		debug_cond(DEBUG_SETUP != 0,
+			   "\tSET_FEATURE: wLength is not zero.....\n");
 		return 1;
 	}
 
@@ -1205,20 +1238,24 @@ static int s3c_udc_set_feature(struct usb_ep *_ep)
 	case USB_RECIP_DEVICE:
 		switch (usb_ctrl->wValue) {
 		case USB_DEVICE_REMOTE_WAKEUP:
-			DEBUG_SETUP("\tSET_FEATURE:USB_DEVICE_REMOTE_WAKEUP\n");
+			debug_cond(DEBUG_SETUP != 0,
+				   "\tSET_FEATURE:USB_DEVICE_REMOTE_WAKEUP\n");
 			break;
 		case USB_DEVICE_B_HNP_ENABLE:
-			DEBUG_SETUP("\tSET_FEATURE: USB_DEVICE_B_HNP_ENABLE\n");
+			debug_cond(DEBUG_SETUP != 0,
+				   "\tSET_FEATURE: USB_DEVICE_B_HNP_ENABLE\n");
 			break;
 
 		case USB_DEVICE_A_HNP_SUPPORT:
 			/* RH port supports HNP */
-			DEBUG_SETUP("\tSET_FEATURE:USB_DEVICE_A_HNP_SUPPORT\n");
+			debug_cond(DEBUG_SETUP != 0,
+				   "\tSET_FEATURE:USB_DEVICE_A_HNP_SUPPORT\n");
 			break;
 
 		case USB_DEVICE_A_ALT_HNP_SUPPORT:
 			/* other RH port does */
-			DEBUG_SETUP("\tSET: USB_DEVICE_A_ALT_HNP_SUPPORT\n");
+			debug_cond(DEBUG_SETUP != 0,
+				   "\tSET: USB_DEVICE_A_ALT_HNP_SUPPORT\n");
 			break;
 		}
 
@@ -1226,11 +1263,13 @@ static int s3c_udc_set_feature(struct usb_ep *_ep)
 		return 0;
 
 	case USB_RECIP_INTERFACE:
-		DEBUG_SETUP("\tSET_FEATURE: USB_RECIP_INTERFACE\n");
+		debug_cond(DEBUG_SETUP != 0,
+			   "\tSET_FEATURE: USB_RECIP_INTERFACE\n");
 		break;
 
 	case USB_RECIP_ENDPOINT:
-		DEBUG_SETUP("\tSET_FEATURE: USB_RECIP_ENDPOINT\n");
+		debug_cond(DEBUG_SETUP != 0,
+			   "\tSET_FEATURE: USB_RECIP_ENDPOINT\n");
 		if (usb_ctrl->wValue == USB_ENDPOINT_HALT) {
 			if (ep_num == 0) {
 				s3c_udc_ep0_set_stall(ep);
@@ -1262,14 +1301,15 @@ void s3c_ep0_setup(struct s3c_udc *dev)
 	/* read control req from fifo (8 bytes) */
 	s3c_fifo_read(ep, (u32 *)usb_ctrl, 8);
 
-	DEBUG_SETUP("%s: bRequestType = 0x%x(%s), bRequest = 0x%x"
-		    "\twLength = 0x%x, wValue = 0x%x, wIndex= 0x%x\n",
-		    __func__, usb_ctrl->bRequestType,
-		    (usb_ctrl->bRequestType & USB_DIR_IN) ? "IN" : "OUT",
-		    usb_ctrl->bRequest,
-		    usb_ctrl->wLength, usb_ctrl->wValue, usb_ctrl->wIndex);
+	debug_cond(DEBUG_SETUP != 0,
+		   "%s: bRequestType = 0x%x(%s), bRequest = 0x%x"
+		   "\twLength = 0x%x, wValue = 0x%x, wIndex= 0x%x\n",
+		   __func__, usb_ctrl->bRequestType,
+		   (usb_ctrl->bRequestType & USB_DIR_IN) ? "IN" : "OUT",
+		   usb_ctrl->bRequest,
+		   usb_ctrl->wLength, usb_ctrl->wValue, usb_ctrl->wIndex);
 
-#ifdef DEBUG_S3C_UDC
+#ifdef DEBUG
 	{
 		int i, len = sizeof(*usb_ctrl);
 		char *p = (char *)usb_ctrl;
@@ -1286,10 +1326,12 @@ void s3c_ep0_setup(struct s3c_udc *dev)
 
 	if (usb_ctrl->bRequest == GET_MAX_LUN_REQUEST &&
 	    usb_ctrl->wLength != 1) {
-		DEBUG_SETUP("\t%s:GET_MAX_LUN_REQUEST:invalid",
-			      __func__);
-		DEBUG_SETUP("wLength = %d, setup returned\n",
-			    usb_ctrl->wLength);
+		debug_cond(DEBUG_SETUP != 0,
+			   "\t%s:GET_MAX_LUN_REQUEST:invalid",
+			   __func__);
+		debug_cond(DEBUG_SETUP != 0,
+			   "wLength = %d, setup returned\n",
+			   usb_ctrl->wLength);
 
 		s3c_udc_ep0_set_stall(ep);
 		dev->ep0state = WAIT_FOR_SETUP;
@@ -1298,8 +1340,9 @@ void s3c_ep0_setup(struct s3c_udc *dev)
 	} else if (usb_ctrl->bRequest == BOT_RESET_REQUEST &&
 		 usb_ctrl->wLength != 0) {
 		/* Bulk-Only *mass storge reset of class-specific request */
-		DEBUG_SETUP("%s:BOT Rest:invalid wLength =%d, setup returned\n",
-			    __func__, usb_ctrl->wLength);
+		debug_cond(DEBUG_SETUP != 0,
+			   "%s:BOT Rest:invalid wLength =%d, setup returned\n",
+			   __func__, usb_ctrl->wLength);
 
 		s3c_udc_ep0_set_stall(ep);
 		dev->ep0state = WAIT_FOR_SETUP;
@@ -1323,8 +1366,9 @@ void s3c_ep0_setup(struct s3c_udc *dev)
 	if (dev->req_std) {
 		switch (usb_ctrl->bRequest) {
 		case USB_REQ_SET_ADDRESS:
-		DEBUG_SETUP("%s: *** USB_REQ_SET_ADDRESS (%d)\n",
-				__func__, usb_ctrl->wValue);
+		debug_cond(DEBUG_SETUP != 0,
+			   "%s: *** USB_REQ_SET_ADDRESS (%d)\n",
+			   __func__, usb_ctrl->wValue);
 			if (usb_ctrl->bRequestType
 				!= (USB_TYPE_STANDARD | USB_RECIP_DEVICE))
 				break;
@@ -1333,9 +1377,11 @@ void s3c_ep0_setup(struct s3c_udc *dev)
 			return;
 
 		case USB_REQ_SET_CONFIGURATION:
-			DEBUG_SETUP("=====================================\n");
-			DEBUG_SETUP("%s: USB_REQ_SET_CONFIGURATION (%d)\n",
-					__func__, usb_ctrl->wValue);
+			debug_cond(DEBUG_SETUP != 0,
+				   "=====================================\n");
+			debug_cond(DEBUG_SETUP != 0,
+				   "%s: USB_REQ_SET_CONFIGURATION (%d)\n",
+				   __func__, usb_ctrl->wValue);
 
 			if (usb_ctrl->bRequestType == USB_RECIP_DEVICE)
 				reset_available = 1;
@@ -1343,13 +1389,15 @@ void s3c_ep0_setup(struct s3c_udc *dev)
 			break;
 
 		case USB_REQ_GET_DESCRIPTOR:
-			DEBUG_SETUP("%s: *** USB_REQ_GET_DESCRIPTOR\n",
-				    __func__);
+			debug_cond(DEBUG_SETUP != 0,
+				   "%s: *** USB_REQ_GET_DESCRIPTOR\n",
+				   __func__);
 			break;
 
 		case USB_REQ_SET_INTERFACE:
-			DEBUG_SETUP("%s: *** USB_REQ_SET_INTERFACE (%d)\n",
-					__func__, usb_ctrl->wValue);
+			debug_cond(DEBUG_SETUP != 0,
+				   "%s: *** USB_REQ_SET_INTERFACE (%d)\n",
+				   __func__, usb_ctrl->wValue);
 
 			if (usb_ctrl->bRequestType == USB_RECIP_INTERFACE)
 				reset_available = 1;
@@ -1357,8 +1405,9 @@ void s3c_ep0_setup(struct s3c_udc *dev)
 			break;
 
 		case USB_REQ_GET_CONFIGURATION:
-			DEBUG_SETUP("%s: *** USB_REQ_GET_CONFIGURATION\n",
-				    __func__);
+			debug_cond(DEBUG_SETUP != 0,
+				   "%s: *** USB_REQ_GET_CONFIGURATION\n",
+				   __func__);
 			break;
 
 		case USB_REQ_GET_STATUS:
@@ -1384,8 +1433,9 @@ void s3c_ep0_setup(struct s3c_udc *dev)
 			break;
 
 		default:
-			DEBUG_SETUP("%s: *** Default of usb_ctrl->bRequest=0x%x"
-				"happened.\n", __func__, usb_ctrl->bRequest);
+			debug_cond(DEBUG_SETUP != 0,
+				   "%s: *** Default of usb_ctrl->bRequest=0x%x"
+				   "happened.\n", __func__, usb_ctrl->bRequest);
 			break;
 		}
 	}
@@ -1394,7 +1444,8 @@ void s3c_ep0_setup(struct s3c_udc *dev)
 	if (likely(dev->driver)) {
 		/* device-2-host (IN) or no data setup command,
 		 * process immediately */
-		DEBUG_SETUP("%s:usb_ctrlreq will be passed to fsg_setup()\n",
+		debug_cond(DEBUG_SETUP != 0,
+			   "%s:usb_ctrlreq will be passed to fsg_setup()\n",
 			    __func__);
 
 		spin_unlock(&dev->lock);
@@ -1406,17 +1457,20 @@ void s3c_ep0_setup(struct s3c_udc *dev)
 			s3c_udc_ep0_set_stall(ep);
 			dev->ep0state = WAIT_FOR_SETUP;
 
-			DEBUG_SETUP("\tdev->driver->setup failed (%d),"
+			debug_cond(DEBUG_SETUP != 0,
+				   "\tdev->driver->setup failed (%d),"
 				    " bRequest = %d\n",
 				i, usb_ctrl->bRequest);
 
 
 		} else if (dev->req_pending) {
 			dev->req_pending = 0;
-			DEBUG_SETUP("\tdev->req_pending...\n");
+			debug_cond(DEBUG_SETUP != 0,
+				   "\tdev->req_pending...\n");
 		}
 
-		DEBUG_SETUP("\tep0state = %s\n", state_names[dev->ep0state]);
+		debug_cond(DEBUG_SETUP != 0,
+			   "\tep0state = %s\n", state_names[dev->ep0state]);
 
 	}
 }
@@ -1427,18 +1481,21 @@ void s3c_ep0_setup(struct s3c_udc *dev)
 static void s3c_handle_ep0(struct s3c_udc *dev)
 {
 	if (dev->ep0state == WAIT_FOR_SETUP) {
-		DEBUG_OUT_EP("%s: WAIT_FOR_SETUP\n", __func__);
+		debug_cond(DEBUG_OUT_EP != 0,
+			   "%s: WAIT_FOR_SETUP\n", __func__);
 		s3c_ep0_setup(dev);
 
 	} else {
-		DEBUG_OUT_EP("%s: strange state!!(state = %s)\n",
+		debug_cond(DEBUG_OUT_EP != 0,
+			   "%s: strange state!!(state = %s)\n",
 			__func__, state_names[dev->ep0state]);
 	}
 }
 
 static void s3c_ep0_kick(struct s3c_udc *dev, struct s3c_ep *ep)
 {
-	DEBUG_EP0("%s: ep_is_in = %d\n", __func__, ep_is_in(ep));
+	debug_cond(DEBUG_EP0 != 0,
+		   "%s: ep_is_in = %d\n", __func__, ep_is_in(ep));
 	if (ep_is_in(ep)) {
 		dev->ep0state = DATA_STATE_XMIT;
 		s3c_ep0_write(dev);

drivers/usb/gadget/usbstring.c

@@ -13,6 +13,7 @@
 #include <common.h>
 #include <asm/errno.h>
 #include <linux/usb/ch9.h>
+#include <usbdescriptors.h>
 #include <linux/usb/gadget.h>
 
 #include <asm/unaligned.h>

drivers/usb/host/Makefile

@@ -50,6 +50,7 @@ COBJS-$(CONFIG_USB_EHCI_PPC4XX) += ehci-ppc4xx.o
 COBJS-$(CONFIG_USB_EHCI_IXP4XX) += ehci-ixp.o
 COBJS-$(CONFIG_USB_EHCI_MARVELL) += ehci-marvell.o
 COBJS-$(CONFIG_USB_EHCI_PCI) += ehci-pci.o
+COBJS-$(CONFIG_USB_EHCI_S5P) += ehci-s5p.o
 COBJS-$(CONFIG_USB_EHCI_TEGRA) += ehci-tegra.o
 COBJS-$(CONFIG_USB_EHCI_VCT) += ehci-vct.o
 

drivers/usb/host/ehci-hcd.c

@@ -108,99 +108,6 @@ static struct descriptor {
 #define ehci_is_TDI()	(0)
 #endif
 
-#if defined(CONFIG_EHCI_DCACHE)
-/*
- * Routines to handle (flush/invalidate) the dcache for the QH and qTD
- * structures and data buffers. This is needed on platforms using this
- * EHCI support with dcache enabled.
- */
-static void flush_invalidate(u32 addr, int size, int flush)
-{
-	if (flush)
-		flush_dcache_range(addr, addr + size);
-	else
-		invalidate_dcache_range(addr, addr + size);
-}
-
-static void cache_qtd(struct qTD *qtd, int flush)
-{
-	u32 *ptr = (u32 *)qtd->qt_buffer[0];
-	int len = (qtd->qt_token & 0x7fff0000) >> 16;
-
-	flush_invalidate((u32)qtd, sizeof(struct qTD), flush);
-	if (ptr && len)
-		flush_invalidate((u32)ptr, len, flush);
-}
-
-
-static inline struct QH *qh_addr(struct QH *qh)
-{
-	return (struct QH *)((u32)qh & 0xffffffe0);
-}
-
-static void cache_qh(struct QH *qh, int flush)
-{
-	struct qTD *qtd;
-	struct qTD *next;
-	static struct qTD *first_qtd;
-
-	/*
-	 * Walk the QH list and flush/invalidate all entries
-	 */
-	while (1) {
-		flush_invalidate((u32)qh_addr(qh), sizeof(struct QH), flush);
-		if ((u32)qh & QH_LINK_TYPE_QH)
-			break;
-		qh = qh_addr(qh);
-		qh = (struct QH *)qh->qh_link;
-	}
-	qh = qh_addr(qh);
-
-	/*
-	 * Save first qTD pointer, needed for invalidating pass on this QH
-	 */
-	if (flush)
-		first_qtd = qtd = (struct qTD *)(*(u32 *)&qh->qh_overlay &
-						 0xffffffe0);
-	else
-		qtd = first_qtd;
-
-	/*
-	 * Walk the qTD list and flush/invalidate all entries
-	 */
-	while (1) {
-		if (qtd == NULL)
-			break;
-		cache_qtd(qtd, flush);
-		next = (struct qTD *)((u32)qtd->qt_next & 0xffffffe0);
-		if (next == qtd)
-			break;
-		qtd = next;
-	}
-}
-
-static inline void ehci_flush_dcache(struct QH *qh)
-{
-	cache_qh(qh, 1);
-}
-
-static inline void ehci_invalidate_dcache(struct QH *qh)
-{
-	cache_qh(qh, 0);
-}
-#else /* CONFIG_EHCI_DCACHE */
-/*
- *
- */
-static inline void ehci_flush_dcache(struct QH *qh)
-{
-}
-
-static inline void ehci_invalidate_dcache(struct QH *qh)
-{
-}
-#endif /* CONFIG_EHCI_DCACHE */
-
 void __ehci_powerup_fixup(uint32_t *status_reg, uint32_t *reg)
 {
 	mdelay(50);
@@ -225,11 +132,6 @@ static int handshake(uint32_t *ptr, uint32_t mask, uint32_t done, int usec)
 	return -1;
 }
 
-static void ehci_free(void *p, size_t sz)
-{
-
-}
-
 static int ehci_reset(void)
 {
 	uint32_t cmd;
@@ -266,43 +168,22 @@ out:
 	return ret;
 }
 
-static void *ehci_alloc(size_t sz, size_t align)
-{
-	static struct QH qh __attribute__((aligned(32)));
-	static struct qTD td[3] __attribute__((aligned (32)));
-	static int ntds;
-	void *p;
-
-	switch (sz) {
-	case sizeof(struct QH):
-		p = &qh;
-		ntds = 0;
-		break;
-	case sizeof(struct qTD):
-		if (ntds == 3) {
-			debug("out of TDs\n");
-			return NULL;
-		}
-		p = &td[ntds];
-		ntds++;
-		break;
-	default:
-		debug("unknown allocation size\n");
-		return NULL;
-	}
-
-	memset(p, 0, sz);
-	return p;
-}
-
 static int ehci_td_buffer(struct qTD *td, void *buf, size_t sz)
 {
-	uint32_t addr, delta, next;
+	uint32_t delta, next;
+	uint32_t addr = (uint32_t)buf;
+	size_t rsz = roundup(sz, 32);
 	int idx;
 
-	addr = (uint32_t) buf;
+	if (sz != rsz)
+		debug("EHCI-HCD: Misaligned buffer size (%08x)\n", sz);
+
+	if (addr & 31)
+		debug("EHCI-HCD: Misaligned buffer address (%p)\n", buf);
+
 	idx = 0;
 	while (idx < 5) {
+		flush_dcache_range(addr, addr + rsz);
 		td->qt_buffer[idx] = cpu_to_hc32(addr);
 		td->qt_buffer_hi[idx] = 0;
 		next = (addr + 4096) & ~4095;
@@ -326,8 +207,10 @@ static int
 ehci_submit_async(struct usb_device *dev, unsigned long pipe, void *buffer,
 		   int length, struct devrequest *req)
 {
-	struct QH *qh;
-	struct qTD *td;
+	static struct QH qh __attribute__((aligned(32)));
+	static struct qTD qtd[3] __attribute__((aligned (32)));
+	int qtd_counter = 0;
+
 	volatile struct qTD *vtd;
 	unsigned long ts;
 	uint32_t *tdp;
@@ -346,12 +229,22 @@ ehci_submit_async(struct usb_device *dev, unsigned long pipe, void *buffer,
 		      le16_to_cpu(req->value), le16_to_cpu(req->value),
 		      le16_to_cpu(req->index));
 
-	qh = ehci_alloc(sizeof(struct QH), 32);
-	if (qh == NULL) {
-		debug("unable to allocate QH\n");
-		return -1;
-	}
-	qh->qh_link = cpu_to_hc32((uint32_t)&qh_list | QH_LINK_TYPE_QH);
+	memset(&qh, 0, sizeof(struct QH));
+	memset(qtd, 0, sizeof(qtd));
+
+	toggle = usb_gettoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe));
+
+	/*
+	 * Setup QH (3.6 in ehci-r10.pdf)
+	 *
+	 *   qh_link ................. 03-00 H
+	 *   qh_endpt1 ............... 07-04 H
+	 *   qh_endpt2 ............... 0B-08 H
+	 * - qh_curtd
+	 *   qh_overlay.qt_next ...... 13-10 H
+	 * - qh_overlay.qt_altnext
+	 */
+	qh.qh_link = cpu_to_hc32((uint32_t)&qh_list | QH_LINK_TYPE_QH);
 	c = (usb_pipespeed(pipe) != USB_SPEED_HIGH &&
 	     usb_pipeendpoint(pipe) == 0) ? 1 : 0;
 	endpt = (8 << 28) |
@@ -362,88 +255,98 @@ ehci_submit_async(struct usb_device *dev, unsigned long pipe, void *buffer,
 	    (usb_pipespeed(pipe) << 12) |
 	    (usb_pipeendpoint(pipe) << 8) |
 	    (0 << 7) | (usb_pipedevice(pipe) << 0);
-	qh->qh_endpt1 = cpu_to_hc32(endpt);
+	qh.qh_endpt1 = cpu_to_hc32(endpt);
 	endpt = (1 << 30) |
 	    (dev->portnr << 23) |
 	    (dev->parent->devnum << 16) | (0 << 8) | (0 << 0);
-	qh->qh_endpt2 = cpu_to_hc32(endpt);
-	qh->qh_overlay.qt_next = cpu_to_hc32(QT_NEXT_TERMINATE);
-
-	td = NULL;
-	tdp = &qh->qh_overlay.qt_next;
+	qh.qh_endpt2 = cpu_to_hc32(endpt);
+	qh.qh_overlay.qt_next = cpu_to_hc32(QT_NEXT_TERMINATE);
 
-	toggle =
-	    usb_gettoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe));
+	tdp = &qh.qh_overlay.qt_next;
 
 	if (req != NULL) {
-		td = ehci_alloc(sizeof(struct qTD), 32);
-		if (td == NULL) {
-			debug("unable to allocate SETUP td\n");
-			goto fail;
-		}
-		td->qt_next = cpu_to_hc32(QT_NEXT_TERMINATE);
-		td->qt_altnext = cpu_to_hc32(QT_NEXT_TERMINATE);
+		/*
+		 * Setup request qTD (3.5 in ehci-r10.pdf)
+		 *
+		 *   qt_next ................ 03-00 H
+		 *   qt_altnext ............. 07-04 H
+		 *   qt_token ............... 0B-08 H
+		 *
+		 *   [ buffer, buffer_hi ] loaded with "req".
+		 */
+		qtd[qtd_counter].qt_next = cpu_to_hc32(QT_NEXT_TERMINATE);
+		qtd[qtd_counter].qt_altnext = cpu_to_hc32(QT_NEXT_TERMINATE);
 		token = (0 << 31) |
 		    (sizeof(*req) << 16) |
 		    (0 << 15) | (0 << 12) | (3 << 10) | (2 << 8) | (0x80 << 0);
-		td->qt_token = cpu_to_hc32(token);
-		if (ehci_td_buffer(td, req, sizeof(*req)) != 0) {
+		qtd[qtd_counter].qt_token = cpu_to_hc32(token);
+		if (ehci_td_buffer(&qtd[qtd_counter], req, sizeof(*req)) != 0) {
 			debug("unable construct SETUP td\n");
-			ehci_free(td, sizeof(*td));
 			goto fail;
 		}
-		*tdp = cpu_to_hc32((uint32_t) td);
-		tdp = &td->qt_next;
+		/* Update previous qTD! */
+		*tdp = cpu_to_hc32((uint32_t)&qtd[qtd_counter]);
+		tdp = &qtd[qtd_counter++].qt_next;
 		toggle = 1;
 	}
 
 	if (length > 0 || req == NULL) {
-		td = ehci_alloc(sizeof(struct qTD), 32);
-		if (td == NULL) {
-			debug("unable to allocate DATA td\n");
-			goto fail;
-		}
-		td->qt_next = cpu_to_hc32(QT_NEXT_TERMINATE);
-		td->qt_altnext = cpu_to_hc32(QT_NEXT_TERMINATE);
+		/*
+		 * Setup request qTD (3.5 in ehci-r10.pdf)
+		 *
+		 *   qt_next ................ 03-00 H
+		 *   qt_altnext ............. 07-04 H
+		 *   qt_token ............... 0B-08 H
+		 *
+		 *   [ buffer, buffer_hi ] loaded with "buffer".
+		 */
+		qtd[qtd_counter].qt_next = cpu_to_hc32(QT_NEXT_TERMINATE);
+		qtd[qtd_counter].qt_altnext = cpu_to_hc32(QT_NEXT_TERMINATE);
 		token = (toggle << 31) |
 		    (length << 16) |
 		    ((req == NULL ? 1 : 0) << 15) |
 		    (0 << 12) |
 		    (3 << 10) |
 		    ((usb_pipein(pipe) ? 1 : 0) << 8) | (0x80 << 0);
-		td->qt_token = cpu_to_hc32(token);
-		if (ehci_td_buffer(td, buffer, length) != 0) {
+		qtd[qtd_counter].qt_token = cpu_to_hc32(token);
+		if (ehci_td_buffer(&qtd[qtd_counter], buffer, length) != 0) {
 			debug("unable construct DATA td\n");
-			ehci_free(td, sizeof(*td));
 			goto fail;
 		}
-		*tdp = cpu_to_hc32((uint32_t) td);
-		tdp = &td->qt_next;
+		/* Update previous qTD! */
+		*tdp = cpu_to_hc32((uint32_t)&qtd[qtd_counter]);
+		tdp = &qtd[qtd_counter++].qt_next;
 	}
 
 	if (req != NULL) {
-		td = ehci_alloc(sizeof(struct qTD), 32);
-		if (td == NULL) {
-			debug("unable to allocate ACK td\n");
-			goto fail;
-		}
-		td->qt_next = cpu_to_hc32(QT_NEXT_TERMINATE);
-		td->qt_altnext = cpu_to_hc32(QT_NEXT_TERMINATE);
+		/*
+		 * Setup request qTD (3.5 in ehci-r10.pdf)
+		 *
+		 *   qt_next ................ 03-00 H
+		 *   qt_altnext ............. 07-04 H
+		 *   qt_token ............... 0B-08 H
+		 */
+		qtd[qtd_counter].qt_next = cpu_to_hc32(QT_NEXT_TERMINATE);
+		qtd[qtd_counter].qt_altnext = cpu_to_hc32(QT_NEXT_TERMINATE);
 		token = (toggle << 31) |
 		    (0 << 16) |
 		    (1 << 15) |
 		    (0 << 12) |
 		    (3 << 10) |
 		    ((usb_pipein(pipe) ? 0 : 1) << 8) | (0x80 << 0);
-		td->qt_token = cpu_to_hc32(token);
-		*tdp = cpu_to_hc32((uint32_t) td);
-		tdp = &td->qt_next;
+		qtd[qtd_counter].qt_token = cpu_to_hc32(token);
+		/* Update previous qTD! */
+		*tdp = cpu_to_hc32((uint32_t)&qtd[qtd_counter]);
+		tdp = &qtd[qtd_counter++].qt_next;
 	}
 
-	qh_list.qh_link = cpu_to_hc32((uint32_t) qh | QH_LINK_TYPE_QH);
+	qh_list.qh_link = cpu_to_hc32((uint32_t)&qh | QH_LINK_TYPE_QH);
 
 	/* Flush dcache */
-	ehci_flush_dcache(&qh_list);
+	flush_dcache_range((uint32_t)&qh_list,
+		(uint32_t)&qh_list + sizeof(struct QH));
+	flush_dcache_range((uint32_t)&qh, (uint32_t)&qh + sizeof(struct QH));
+	flush_dcache_range((uint32_t)qtd, (uint32_t)qtd + sizeof(qtd));
 
 	usbsts = ehci_readl(&hcor->or_usbsts);
 	ehci_writel(&hcor->or_usbsts, (usbsts & 0x3f));
@@ -462,17 +365,27 @@ ehci_submit_async(struct usb_device *dev, unsigned long pipe, void *buffer,
 
 	/* Wait for TDs to be processed. */
 	ts = get_timer(0);
-	vtd = td;
+	vtd = &qtd[qtd_counter - 1];
 	timeout = USB_TIMEOUT_MS(pipe);
 	do {
 		/* Invalidate dcache */
-		ehci_invalidate_dcache(&qh_list);
+		invalidate_dcache_range((uint32_t)&qh_list,
+			(uint32_t)&qh_list + sizeof(struct QH));
+		invalidate_dcache_range((uint32_t)&qh,
+			(uint32_t)&qh + sizeof(struct QH));
+		invalidate_dcache_range((uint32_t)qtd,
+			(uint32_t)qtd + sizeof(qtd));
+
 		token = hc32_to_cpu(vtd->qt_token);
 		if (!(token & 0x80))
 			break;
 		WATCHDOG_RESET();
 	} while (get_timer(ts) < timeout);
 
+	/* Invalidate the memory area occupied by buffer */
+	invalidate_dcache_range(((uint32_t)buffer & ~31),
+		((uint32_t)buffer & ~31) + roundup(length, 32));
+
 	/* Check that the TD processing happened */
 	if (token & 0x80) {
 		printf("EHCI timed out on TD - token=%#x\n", token);
@@ -492,7 +405,7 @@ ehci_submit_async(struct usb_device *dev, unsigned long pipe, void *buffer,
 
 	qh_list.qh_link = cpu_to_hc32((uint32_t)&qh_list | QH_LINK_TYPE_QH);
 
-	token = hc32_to_cpu(qh->qh_overlay.qt_token);
+	token = hc32_to_cpu(qh.qh_overlay.qt_token);
 	if (!(token & 0x80)) {
 		debug("TOKEN=%#x\n", token);
 		switch (token & 0xfc) {
@@ -531,13 +444,6 @@ ehci_submit_async(struct usb_device *dev, unsigned long pipe, void *buffer,
 	return (dev->status != USB_ST_NOT_PROC) ? 0 : -1;
 
 fail:
-	td = (void *)hc32_to_cpu(qh->qh_overlay.qt_next);
-	while (td != (void *)QT_NEXT_TERMINATE) {
-		qh->qh_overlay.qt_next = td->qt_next;
-		ehci_free(td, sizeof(*td));
-		td = (void *)hc32_to_cpu(qh->qh_overlay.qt_next);
-	}
-	ehci_free(qh, sizeof(*qh));
 	return -1;
 }
 

drivers/usb/host/ehci-s5p.c

@@ -0,0 +1,110 @@
+/*
+ * SAMSUNG S5P USB HOST EHCI Controller
+ *
+ * Copyright (C) 2012 Samsung Electronics Co.Ltd
+ *	Vivek Gautam <gautam.vivek@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#include <common.h>
+#include <usb.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/ehci-s5p.h>
+#include "ehci.h"
+#include "ehci-core.h"
+
+/* Setup the EHCI host controller. */
+static void setup_usb_phy(struct s5p_usb_phy *usb)
+{
+	clrbits_le32(&usb->usbphyctrl0,
+			HOST_CTRL0_FSEL_MASK |
+			HOST_CTRL0_COMMONON_N |
+			/* HOST Phy setting */
+			HOST_CTRL0_PHYSWRST |
+			HOST_CTRL0_PHYSWRSTALL |
+			HOST_CTRL0_SIDDQ |
+			HOST_CTRL0_FORCESUSPEND |
+			HOST_CTRL0_FORCESLEEP);
+
+	setbits_le32(&usb->usbphyctrl0,
+			/* Setting up the ref freq */
+			(CLK_24MHZ << 16) |
+			/* HOST Phy setting */
+			HOST_CTRL0_LINKSWRST |
+			HOST_CTRL0_UTMISWRST);
+	udelay(10);
+	clrbits_le32(&usb->usbphyctrl0,
+			HOST_CTRL0_LINKSWRST |
+			HOST_CTRL0_UTMISWRST);
+	udelay(20);
+
+	/* EHCI Ctrl setting */
+	setbits_le32(&usb->ehcictrl,
+			EHCICTRL_ENAINCRXALIGN |
+			EHCICTRL_ENAINCR4 |
+			EHCICTRL_ENAINCR8 |
+			EHCICTRL_ENAINCR16);
+}
+
+/* Reset the EHCI host controller. */
+static void reset_usb_phy(struct s5p_usb_phy *usb)
+{
+	/* HOST_PHY reset */
+	setbits_le32(&usb->usbphyctrl0,
+			HOST_CTRL0_PHYSWRST |
+			HOST_CTRL0_PHYSWRSTALL |
+			HOST_CTRL0_SIDDQ |
+			HOST_CTRL0_FORCESUSPEND |
+			HOST_CTRL0_FORCESLEEP);
+}
+
+/*
+ * EHCI-initialization
+ * Create the appropriate control structures to manage
+ * a new EHCI host controller.
+ */
+int ehci_hcd_init(void)
+{
+	struct s5p_usb_phy *usb;
+
+	usb = (struct s5p_usb_phy *)samsung_get_base_usb_phy();
+	setup_usb_phy(usb);
+
+	hccr = (struct ehci_hccr *)(EXYNOS5_USB_HOST_EHCI_BASE);
+	hcor = (struct ehci_hcor *)((uint32_t) hccr
+				+ HC_LENGTH(ehci_readl(&hccr->cr_capbase)));
+
+	debug("Exynos5-ehci: init hccr %x and hcor %x hc_length %d\n",
+		(uint32_t)hccr, (uint32_t)hcor,
+		(uint32_t)HC_LENGTH(ehci_readl(&hccr->cr_capbase)));
+
+	return 0;
+}
+
+/*
+ * Destroy the appropriate control structures corresponding
+ * the EHCI host controller.
+ */
+int ehci_hcd_stop()
+{
+	struct s5p_usb_phy *usb;
+
+	usb = (struct s5p_usb_phy *)samsung_get_base_usb_phy();
+	reset_usb_phy(usb);
+
+	return 0;
+}

include/linux/usb/ch9.h

@@ -204,28 +204,6 @@ struct usb_descriptor_header {
 	__u8  bDescriptorType;
 } __attribute__ ((packed));
 
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_DEVICE: Device descriptor */
-struct usb_device_descriptor {
-	__u8  bLength;
-	__u8  bDescriptorType;
-
-	__le16 bcdUSB;
-	__u8  bDeviceClass;
-	__u8  bDeviceSubClass;
-	__u8  bDeviceProtocol;
-	__u8  bMaxPacketSize0;
-	__le16 idVendor;
-	__le16 idProduct;
-	__le16 bcdDevice;
-	__u8  iManufacturer;
-	__u8  iProduct;
-	__u8  iSerialNumber;
-	__u8  bNumConfigurations;
-} __attribute__ ((packed));
-
 #define USB_DT_DEVICE_SIZE		18
 
 
@@ -282,56 +260,11 @@ struct usb_config_descriptor {
 #define USB_CONFIG_ATT_WAKEUP		(1 << 5)	/* can wakeup */
 #define USB_CONFIG_ATT_BATTERY		(1 << 4)	/* battery powered */
 
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_STRING: String descriptor */
-struct usb_string_descriptor {
-	__u8  bLength;
-	__u8  bDescriptorType;
-
-	__le16 wData[1];		/* UTF-16LE encoded */
-} __attribute__ ((packed));
-
 /* note that "string" zero is special, it holds language codes that
  * the device supports, not Unicode characters.
  */
 
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_INTERFACE: Interface descriptor */
-struct usb_interface_descriptor {
-	__u8  bLength;
-	__u8  bDescriptorType;
-
-	__u8  bInterfaceNumber;
-	__u8  bAlternateSetting;
-	__u8  bNumEndpoints;
-	__u8  bInterfaceClass;
-	__u8  bInterfaceSubClass;
-	__u8  bInterfaceProtocol;
-	__u8  iInterface;
-} __attribute__ ((packed));
-
 #define USB_DT_INTERFACE_SIZE		9
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_ENDPOINT: Endpoint descriptor */
-struct usb_endpoint_descriptor {
-	__u8  bLength;
-	__u8  bDescriptorType;
-
-	__u8  bEndpointAddress;
-	__u8  bmAttributes;
-	__le16 wMaxPacketSize;
-	__u8  bInterval;
-
-	/* NOTE:  these two are _only_ in audio endpoints. */
-	/* use USB_DT_ENDPOINT*_SIZE in bLength, not sizeof. */
-	__u8  bRefresh;
-	__u8  bSynchAddress;
-} __attribute__ ((packed));
-
 #define USB_DT_ENDPOINT_SIZE		7
 #define USB_DT_ENDPOINT_AUDIO_SIZE	9	/* Audio extension */
 

include/linux/usb/composite.h

@@ -0,0 +1,350 @@
+/*
+ * composite.h -- framework for usb gadgets which are composite devices
+ *
+ * Copyright (C) 2006-2008 David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#ifndef	__LINUX_USB_COMPOSITE_H
+#define	__LINUX_USB_COMPOSITE_H
+
+/*
+ * This framework is an optional layer on top of the USB Gadget interface,
+ * making it easier to build (a) Composite devices, supporting multiple
+ * functions within any single configuration, and (b) Multi-configuration
+ * devices, also supporting multiple functions but without necessarily
+ * having more than one function per configuration.
+ *
+ * Example:  a device with a single configuration supporting both network
+ * link and mass storage functions is a composite device.  Those functions
+ * might alternatively be packaged in individual configurations, but in
+ * the composite model the host can use both functions at the same time.
+ */
+
+#include <common.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <usb/lin_gadget_compat.h>
+
+struct usb_configuration;
+
+/**
+ * struct usb_function - describes one function of a configuration
+ * @name: For diagnostics, identifies the function.
+ * @strings: tables of strings, keyed by identifiers assigned during bind()
+ *	and by language IDs provided in control requests
+ * @descriptors: Table of full (or low) speed descriptors, using interface and
+ *	string identifiers assigned during @bind().  If this pointer is null,
+ *	the function will not be available at full speed (or at low speed).
+ * @hs_descriptors: Table of high speed descriptors, using interface and
+ *	string identifiers assigned during @bind().  If this pointer is null,
+ *	the function will not be available at high speed.
+ * @config: assigned when @usb_add_function() is called; this is the
+ *	configuration with which this function is associated.
+ * @bind: Before the gadget can register, all of its functions bind() to the
+ *	available resources including string and interface identifiers used
+ *	in interface or class descriptors; endpoints; I/O buffers; and so on.
+ * @unbind: Reverses @bind; called as a side effect of unregistering the
+ *	driver which added this function.
+ * @set_alt: (REQUIRED) Reconfigures altsettings; function drivers may
+ *	initialize usb_ep.driver data at this time (when it is used).
+ *	Note that setting an interface to its current altsetting resets
+ *	interface state, and that all interfaces have a disabled state.
+ * @get_alt: Returns the active altsetting.  If this is not provided,
+ *	then only altsetting zero is supported.
+ * @disable: (REQUIRED) Indicates the function should be disabled.  Reasons
+ *	include host resetting or reconfiguring the gadget, and disconnection.
+ * @setup: Used for interface-specific control requests.
+ * @suspend: Notifies functions when the host stops sending USB traffic.
+ * @resume: Notifies functions when the host restarts USB traffic.
+ *
+ * A single USB function uses one or more interfaces, and should in most
+ * cases support operation at both full and high speeds.  Each function is
+ * associated by @usb_add_function() with a one configuration; that function
+ * causes @bind() to be called so resources can be allocated as part of
+ * setting up a gadget driver.  Those resources include endpoints, which
+ * should be allocated using @usb_ep_autoconfig().
+ *
+ * To support dual speed operation, a function driver provides descriptors
+ * for both high and full speed operation.  Except in rare cases that don't
+ * involve bulk endpoints, each speed needs different endpoint descriptors.
+ *
+ * Function drivers choose their own strategies for managing instance data.
+ * The simplest strategy just declares it "static', which means the function
+ * can only be activated once.  If the function needs to be exposed in more
+ * than one configuration at a given speed, it needs to support multiple
+ * usb_function structures (one for each configuration).
+ *
+ * A more complex strategy might encapsulate a @usb_function structure inside
+ * a driver-specific instance structure to allows multiple activations.  An
+ * example of multiple activations might be a CDC ACM function that supports
+ * two or more distinct instances within the same configuration, providing
+ * several independent logical data links to a USB host.
+ */
+struct usb_function {
+	const char			*name;
+	struct usb_gadget_strings	**strings;
+	struct usb_descriptor_header	**descriptors;
+	struct usb_descriptor_header	**hs_descriptors;
+
+	struct usb_configuration	*config;
+
+	/* REVISIT:  bind() functions can be marked __init, which
+	 * makes trouble for section mismatch analysis.  See if
+	 * we can't restructure things to avoid mismatching.
+	 * Related:  unbind() may kfree() but bind() won't...
+	 */
+
+	/* configuration management:  bind/unbind */
+	int			(*bind)(struct usb_configuration *,
+					struct usb_function *);
+	void			(*unbind)(struct usb_configuration *,
+					struct usb_function *);
+
+	/* runtime state management */
+	int			(*set_alt)(struct usb_function *,
+					unsigned interface, unsigned alt);
+	int			(*get_alt)(struct usb_function *,
+					unsigned interface);
+	void			(*disable)(struct usb_function *);
+	int			(*setup)(struct usb_function *,
+					const struct usb_ctrlrequest *);
+	void			(*suspend)(struct usb_function *);
+	void			(*resume)(struct usb_function *);
+
+	/* private: */
+	/* internals */
+	struct list_head		list;
+	DECLARE_BITMAP(endpoints, 32);
+};
+
+int usb_add_function(struct usb_configuration *, struct usb_function *);
+
+int usb_function_deactivate(struct usb_function *);
+int usb_function_activate(struct usb_function *);
+
+int usb_interface_id(struct usb_configuration *, struct usb_function *);
+
+/**
+ * ep_choose - select descriptor endpoint at current device speed
+ * @g: gadget, connected and running at some speed
+ * @hs: descriptor to use for high speed operation
+ * @fs: descriptor to use for full or low speed operation
+ */
+static inline struct usb_endpoint_descriptor *
+ep_choose(struct usb_gadget *g, struct usb_endpoint_descriptor *hs,
+		struct usb_endpoint_descriptor *fs)
+{
+	if (gadget_is_dualspeed(g) && g->speed == USB_SPEED_HIGH)
+		return hs;
+	return fs;
+}
+
+#define	MAX_CONFIG_INTERFACES		16	/* arbitrary; max 255 */
+
+/**
+ * struct usb_configuration - represents one gadget configuration
+ * @label: For diagnostics, describes the configuration.
+ * @strings: Tables of strings, keyed by identifiers assigned during @bind()
+ *	and by language IDs provided in control requests.
+ * @descriptors: Table of descriptors preceding all function descriptors.
+ *	Examples include OTG and vendor-specific descriptors.
+ * @bind: Called from @usb_add_config() to allocate resources unique to this
+ *	configuration and to call @usb_add_function() for each function used.
+ * @unbind: Reverses @bind; called as a side effect of unregistering the
+ *	driver which added this configuration.
+ * @setup: Used to delegate control requests that aren't handled by standard
+ *	device infrastructure or directed at a specific interface.
+ * @bConfigurationValue: Copied into configuration descriptor.
+ * @iConfiguration: Copied into configuration descriptor.
+ * @bmAttributes: Copied into configuration descriptor.
+ * @bMaxPower: Copied into configuration descriptor.
+ * @cdev: assigned by @usb_add_config() before calling @bind(); this is
+ *	the device associated with this configuration.
+ *
+ * Configurations are building blocks for gadget drivers structured around
+ * function drivers.  Simple USB gadgets require only one function and one
+ * configuration, and handle dual-speed hardware by always providing the same
+ * functionality.  Slightly more complex gadgets may have more than one
+ * single-function configuration at a given speed; or have configurations
+ * that only work at one speed.
+ *
+ * Composite devices are, by definition, ones with configurations which
+ * include more than one function.
+ *
+ * The lifecycle of a usb_configuration includes allocation, initialization
+ * of the fields described above, and calling @usb_add_config() to set up
+ * internal data and bind it to a specific device.  The configuration's
+ * @bind() method is then used to initialize all the functions and then
+ * call @usb_add_function() for them.
+ *
+ * Those functions would normally be independant of each other, but that's
+ * not mandatory.  CDC WMC devices are an example where functions often
+ * depend on other functions, with some functions subsidiary to others.
+ * Such interdependency may be managed in any way, so long as all of the
+ * descriptors complete by the time the composite driver returns from
+ * its bind() routine.
+ */
+struct usb_configuration {
+	const char			*label;
+	struct usb_gadget_strings	**strings;
+	const struct usb_descriptor_header **descriptors;
+
+	/* REVISIT:  bind() functions can be marked __init, which
+	 * makes trouble for section mismatch analysis.  See if
+	 * we can't restructure things to avoid mismatching...
+	 */
+
+	/* configuration management:  bind/unbind */
+	int			(*bind)(struct usb_configuration *);
+	void			(*unbind)(struct usb_configuration *);
+	int			(*setup)(struct usb_configuration *,
+					const struct usb_ctrlrequest *);
+
+	/* fields in the config descriptor */
+	u8			bConfigurationValue;
+	u8			iConfiguration;
+	u8			bmAttributes;
+	u8			bMaxPower;
+
+	struct usb_composite_dev	*cdev;
+
+	/* private: */
+	/* internals */
+	struct list_head	list;
+	struct list_head	functions;
+	u8			next_interface_id;
+	unsigned		highspeed:1;
+	unsigned		fullspeed:1;
+	struct usb_function	*interface[MAX_CONFIG_INTERFACES];
+};
+
+int usb_add_config(struct usb_composite_dev *,
+		struct usb_configuration *);
+
+/**
+ * struct usb_composite_driver - groups configurations into a gadget
+ * @name: For diagnostics, identifies the driver.
+ * @dev: Template descriptor for the device, including default device
+ *	identifiers.
+ * @strings: tables of strings, keyed by identifiers assigned during bind()
+ *	and language IDs provided in control requests
+ * @bind: (REQUIRED) Used to allocate resources that are shared across the
+ *	whole device, such as string IDs, and add its configurations using
+ *	@usb_add_config().  This may fail by returning a negative errno
+ *	value; it should return zero on successful initialization.
+ * @unbind: Reverses @bind(); called as a side effect of unregistering
+ *	this driver.
+ * @disconnect: optional driver disconnect method
+ * @suspend: Notifies when the host stops sending USB traffic,
+ *	after function notifications
+ * @resume: Notifies configuration when the host restarts USB traffic,
+ *	before function notifications
+ *
+ * Devices default to reporting self powered operation.  Devices which rely
+ * on bus powered operation should report this in their @bind() method.
+ *
+ * Before returning from @bind, various fields in the template descriptor
+ * may be overridden.  These include the idVendor/idProduct/bcdDevice values
+ * normally to bind the appropriate host side driver, and the three strings
+ * (iManufacturer, iProduct, iSerialNumber) normally used to provide user
+ * meaningful device identifiers.  (The strings will not be defined unless
+ * they are defined in @dev and @strings.)  The correct ep0 maxpacket size
+ * is also reported, as defined by the underlying controller driver.
+ */
+struct usb_composite_driver {
+	const char				*name;
+	const struct usb_device_descriptor	*dev;
+	struct usb_gadget_strings		**strings;
+
+	/* REVISIT:  bind() functions can be marked __init, which
+	 * makes trouble for section mismatch analysis.  See if
+	 * we can't restructure things to avoid mismatching...
+	 */
+
+	int			(*bind)(struct usb_composite_dev *);
+	int			(*unbind)(struct usb_composite_dev *);
+
+	void			(*disconnect)(struct usb_composite_dev *);
+
+	/* global suspend hooks */
+	void			(*suspend)(struct usb_composite_dev *);
+	void			(*resume)(struct usb_composite_dev *);
+};
+
+extern int usb_composite_register(struct usb_composite_driver *);
+extern void usb_composite_unregister(struct usb_composite_driver *);
+
+
+/**
+ * struct usb_composite_device - represents one composite usb gadget
+ * @gadget: read-only, abstracts the gadget's usb peripheral controller
+ * @req: used for control responses; buffer is pre-allocated
+ * @bufsiz: size of buffer pre-allocated in @req
+ * @config: the currently active configuration
+ *
+ * One of these devices is allocated and initialized before the
+ * associated device driver's bind() is called.
+ *
+ * OPEN ISSUE:  it appears that some WUSB devices will need to be
+ * built by combining a normal (wired) gadget with a wireless one.
+ * This revision of the gadget framework should probably try to make
+ * sure doing that won't hurt too much.
+ *
+ * One notion for how to handle Wireless USB devices involves:
+ * (a) a second gadget here, discovery mechanism TBD, but likely
+ *     needing separate "register/unregister WUSB gadget" calls;
+ * (b) updates to usb_gadget to include flags "is it wireless",
+ *     "is it wired", plus (presumably in a wrapper structure)
+ *     bandgroup and PHY info;
+ * (c) presumably a wireless_ep wrapping a usb_ep, and reporting
+ *     wireless-specific parameters like maxburst and maxsequence;
+ * (d) configurations that are specific to wireless links;
+ * (e) function drivers that understand wireless configs and will
+ *     support wireless for (additional) function instances;
+ * (f) a function to support association setup (like CBAF), not
+ *     necessarily requiring a wireless adapter;
+ * (g) composite device setup that can create one or more wireless
+ *     configs, including appropriate association setup support;
+ * (h) more, TBD.
+ */
+struct usb_composite_dev {
+	struct usb_gadget		*gadget;
+	struct usb_request		*req;
+	unsigned			bufsiz;
+
+	struct usb_configuration	*config;
+
+	/* private: */
+	/* internals */
+	unsigned int			suspended:1;
+	struct usb_device_descriptor	desc;
+	struct list_head		configs;
+	struct usb_composite_driver	*driver;
+	u8				next_string_id;
+
+	/* the gadget driver won't enable the data pullup
+	 * while the deactivation count is nonzero.
+	 */
+	unsigned			deactivations;
+};
+
+extern int usb_string_id(struct usb_composite_dev *c);
+extern int usb_string_ids_tab(struct usb_composite_dev *c,
+			      struct usb_string *str);
+extern int usb_string_ids_n(struct usb_composite_dev *c, unsigned n);
+
+#endif	/* __LINUX_USB_COMPOSITE_H */

include/linux/usb/gadget.h

@@ -411,6 +411,7 @@ struct usb_gadget_ops {
 
 struct device {
 	void		*driver_data;	/* data private to the driver */
+	void            *device_data;   /* data private to the device */
 };
 
 /**
@@ -481,6 +482,11 @@ static inline void *get_gadget_data(struct usb_gadget *gadget)
 	return gadget->dev.driver_data;
 }
 
+static inline struct usb_gadget *dev_to_usb_gadget(struct device *dev)
+{
+	return container_of(dev, struct usb_gadget, dev);
+}
+
 /* iterates the non-control endpoints; 'tmp' is a struct usb_ep pointer */
 #define gadget_for_each_ep(tmp, gadget) \
 	list_for_each_entry(tmp, &(gadget)->ep_list, ep_list)

include/scsi.h

@@ -26,7 +26,9 @@
 
 typedef struct SCSI_cmd_block{
 	unsigned char		cmd[16];					/* command				   */
-	unsigned char		sense_buf[64];		/* for request sense */
+	/* for request sense */
+	unsigned char		sense_buf[64]
+		__attribute__((aligned(ARCH_DMA_MINALIGN)));
 	unsigned char		status;						/* SCSI Status			 */
 	unsigned char		target;						/* Target ID				 */
 	unsigned char		lun;							/* Target LUN        */

include/usb.h

@@ -109,7 +109,9 @@ struct usb_device {
 	int epmaxpacketout[16];		/* OUTput endpoint specific maximums */
 
 	int configno;			/* selected config number */
-	struct usb_device_descriptor descriptor; /* Device Descriptor */
+	/* Device Descriptor */
+	struct usb_device_descriptor descriptor
+		__attribute__((aligned(ARCH_DMA_MINALIGN)));
 	struct usb_config config; /* config descriptor */
 
 	int have_langid;		/* whether string_langid is valid yet */

include/usb/lin_gadget_compat.h

@@ -44,6 +44,25 @@
 
 #define ENOTSUPP	524	/* Operation is not supported */
 
+#define BITS_PER_BYTE				8
+#define BITS_TO_LONGS(nr) \
+	DIV_ROUND_UP(nr, BITS_PER_BYTE * sizeof(long))
+#define DECLARE_BITMAP(name, bits) \
+	unsigned long name[BITS_TO_LONGS(bits)]
+
+#define small_const_nbits(nbits) \
+	(__builtin_constant_p(nbits) && (nbits) <= BITS_PER_LONG)
+
+static inline void bitmap_zero(unsigned long *dst, int nbits)
+{
+	if (small_const_nbits(nbits))
+		*dst = 0UL;
+	else {
+		int len = BITS_TO_LONGS(nbits) * sizeof(unsigned long);
+		memset(dst, 0, len);
+	}
+}
+
 #define dma_cache_maint(addr, size, mode) cache_flush()
 void cache_flush(void);
 

include/usb/s3c_udc.h

@@ -24,6 +24,7 @@
 
 #include <asm/errno.h>
 #include <linux/usb/ch9.h>
+#include <usbdescriptors.h>
 #include <linux/usb/gadget.h>
 #include <linux/list.h>
 #include <usb/lin_gadget_compat.h>
@@ -111,54 +112,6 @@ extern struct s3c_udc *the_controller;
 #define ep_index(EP) ((EP)->bEndpointAddress&0xF)
 #define ep_maxpacket(EP) ((EP)->ep.maxpacket)
 
-/*-------------------------------------------------------------------------*/
-/* #define DEBUG_UDC */
-#ifdef DEBUG_UDC
-#define DBG(stuff...)		printf("udc: " stuff)
-#else
-#define DBG(stuff...)		do {} while (0)
-#endif
-
-#ifdef DEBUG_S3C_UDC_SETUP
-#define DEBUG_SETUP(fmt, args...) printk(fmt, ##args)
-#else
-#define DEBUG_SETUP(fmt, args...) do {} while (0)
-#endif
-
-#ifdef DEBUG_S3C_UDC_EP0
-#define DEBUG_EP0(fmt, args...) printk(fmt, ##args)
-#else
-#define DEBUG_EP0(fmt, args...) do {} while (0)
-#endif
-
-#ifdef DEBUG_S3C_UDC_ISR
-#define DEBUG_ISR	1
-#else
-#define DEBUG_ISR	0
-#endif
-
-#ifdef DEBUG_S3C_UDC_OUT_EP
-#define DEBUG_OUT_EP(fmt, args...) printk(fmt, ##args)
-#else
-#define DEBUG_OUT_EP(fmt, args...) do {} while (0)
-#endif
-
-#ifdef DEBUG_S3C_UDC_IN_EP
-#define DEBUG_IN_EP	1
-#else
-#define DEBUG_IN_EP	0
-#endif
-
-#if defined(DEBUG_S3C_UDC_SETUP) || defined(DEBUG_S3C_UDC_EP0) || \
-	defined(DEBUG_S3C_UDC_ISR) || defined(DEBUG_S3C_UDC_OUT_EP) || \
-	defined(DEBUG_S3C_UDC_IN_EP) || defined(DEBUG_S3C_UDC)
-#define DEBUG
-#endif
-
-#define ERR(stuff...)		printf("ERR udc: " stuff)
-#define WARN(stuff...)		printf("WARNING udc: " stuff)
-#define INFO(stuff...)		printf("INFO udc: " stuff)
-
 extern void otg_phy_init(struct s3c_udc *dev);
 extern void otg_phy_off(struct s3c_udc *dev);