powerpc/mpc8xxx: Fix CONFIG_DDR_RAW_TIMING for two boards

P1010RDB and p1_pc_rdb_pc has incorrect configuration for
CONFIG_DDR_RAW_TIMING. It should be CONFIG_SYS_DDR_RAW_TIMING.
Incorrect setting causes DDR failure in case of SPD absent.

Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>

board/freescale/p1010rdb/ddr.c

@@ -31,7 +31,7 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#ifndef CONFIG_DDR_RAW_TIMING
+#ifndef CONFIG_SYS_DDR_RAW_TIMING
 #define CONFIG_SYS_DRAM_SIZE	1024
 
 fsl_ddr_cfg_regs_t ddr_cfg_regs_800 = {
@@ -165,7 +165,7 @@ phys_size_t fixed_sdram(void)
 	return ddr_size;
 }
 
-#else /* CONFIG_DDR_RAW_TIMING */
+#else /* CONFIG_SYS_DDR_RAW_TIMING */
 /*
  * Samsung K4B2G0846C-HCF8
  * The following timing are for "downshift"
@@ -247,4 +247,4 @@ void fsl_ddr_board_options(memctl_options_t *popts,
 	}
 }
 
-#endif /* CONFIG_DDR_RAW_TIMING */
+#endif /* CONFIG_SYS_DDR_RAW_TIMING */

board/freescale/p1_p2_rdb_pc/ddr.c

@@ -15,7 +15,7 @@
 #include <asm/io.h>
 #include <asm/fsl_law.h>
 
-#ifdef CONFIG_DDR_RAW_TIMING
+#ifdef CONFIG_SYS_DDR_RAW_TIMING
 #if	defined(CONFIG_P1020RDB_PROTO) || \
 	defined(CONFIG_P1021RDB) || \
 	defined(CONFIG_P1020UTM)
@@ -204,7 +204,7 @@ int fsl_ddr_get_dimm_params(dimm_params_t *pdimm,
 
 	return 0;
 }
-#endif /* CONFIG_DDR_RAW_TIMING */
+#endif /* CONFIG_SYS_DDR_RAW_TIMING */
 
 /* Fixed sdram init -- doesn't use serial presence detect. */
 phys_size_t fixed_sdram(void)

include/configs/P1010RDB.h

@@ -181,7 +181,7 @@
 
 /* DDR Setup */
 #define CONFIG_FSL_DDR3
-#define CONFIG_DDR_RAW_TIMING
+#define CONFIG_SYS_DDR_RAW_TIMING
 #define CONFIG_DDR_SPD
 #define CONFIG_SYS_SPD_BUS_NUM		1
 #define SPD_EEPROM_ADDRESS		0x52

include/configs/p1_p2_rdb_pc.h

@@ -227,7 +227,7 @@
 
 /* DDR Setup */
 #define CONFIG_FSL_DDR3
-#define CONFIG_DDR_RAW_TIMING
+#define CONFIG_SYS_DDR_RAW_TIMING
 #define CONFIG_DDR_SPD
 #define CONFIG_SYS_SPD_BUS_NUM 1
 #define SPD_EEPROM_ADDRESS 0x52