Merge branch 'u-boot/master' into 'u-boot-arm/master'

Conflicts:
	drivers/video/exynos_fb.c

MAKEALL

@@ -664,7 +664,7 @@ build_target() {
 	export BUILD_DIR="${output_dir}"
 
 	target_arch=$(get_target_arch ${target})
-	eval cross_toolchain=\$CROSS_COMPILE_${target_arch^^}
+	eval cross_toolchain=\$CROSS_COMPILE_`echo $target_arch | tr '[:lower:]' '[:upper:]'`
 	if [ "${cross_toolchain}" ] ; then
 	    MAKE="make CROSS_COMPILE=${cross_toolchain}"
 	elif [ "${CROSS_COMPILE}" ] ; then

Makefile

@@ -24,7 +24,7 @@
 VERSION = 2013
 PATCHLEVEL = 04
 SUBLEVEL =
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc2
 ifneq "$(SUBLEVEL)" ""
 U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
 else
@@ -402,8 +402,10 @@ ALL-y += $(obj)u-boot.srec $(obj)u-boot.bin $(obj)System.map
 ALL-$(CONFIG_NAND_U_BOOT) += $(obj)u-boot-nand.bin
 ALL-$(CONFIG_ONENAND_U_BOOT) += $(obj)u-boot-onenand.bin
 ALL-$(CONFIG_SPL) += $(obj)spl/u-boot-spl.bin
-ALL-$(CONFIG_SPL) += $(obj)$(subst ",,$(CONFIG_SPL_TARGET))
 ALL-$(CONFIG_OF_SEPARATE) += $(obj)u-boot.dtb $(obj)u-boot-dtb.bin
+ifneq ($(CONFIG_SPL_TARGET),)
+ALL-$(CONFIG_SPL) += $(obj)$(subst ",,$(CONFIG_SPL_TARGET))
+endif
 
 # enable combined SPL/u-boot/dtb rules for tegra
 ifneq ($(CONFIG_TEGRA),)

README

@@ -496,6 +496,13 @@ The following options need to be configured:
 		exists, unlike the similar options in the Linux kernel. Do not
 		set these options unless they apply!
 
+- CPU timer options:
+		CONFIG_SYS_HZ
+
+		The frequency of the timer returned by get_timer().
+		get_timer() must operate in milliseconds and this CONFIG
+		option must be set to 1000.
+
 - Linux Kernel Interface:
 		CONFIG_CLOCKS_IN_MHZ
 
@@ -1329,6 +1336,29 @@ The following options need to be configured:
 			CONFIG_SH_MMCIF_CLK
 			Define the clock frequency for MMCIF
 
+- USB Device Firmware Update (DFU) class support:
+		CONFIG_DFU_FUNCTION
+		This enables the USB portion of the DFU USB class
+
+		CONFIG_CMD_DFU
+		This enables the command "dfu" which is used to have
+		U-Boot create a DFU class device via USB.  This command
+		requires that the "dfu_alt_info" environment variable be
+		set and define the alt settings to expose to the host.
+
+		CONFIG_DFU_MMC
+		This enables support for exposing (e)MMC devices via DFU.
+
+		CONFIG_DFU_NAND
+		This enables support for exposing NAND devices via DFU.
+
+		CONFIG_SYS_DFU_MAX_FILE_SIZE
+		When updating files rather than the raw storage device,
+		we use a static buffer to copy the file into and then write
+		the buffer once we've been given the whole file.  Define
+		this to the maximum filesize (in bytes) for the buffer.
+		Default is 4 MiB if undefined.
+
 - Journaling Flash filesystem support:
 		CONFIG_JFFS2_NAND, CONFIG_JFFS2_NAND_OFF, CONFIG_JFFS2_NAND_SIZE,
 		CONFIG_JFFS2_NAND_DEV
@@ -1930,15 +1960,15 @@ CBFS (Coreboot Filesystem) support
 
 		I2C_READ
 
-		Code that returns TRUE if the I2C data line is high,
-		FALSE if it is low.
+		Code that returns true if the I2C data line is high,
+		false if it is low.
 
 		eg: #define I2C_READ ((immr->im_cpm.cp_pbdat & PB_SDA) != 0)
 
 		I2C_SDA(bit)
 
-		If <bit> is TRUE, sets the I2C data line high. If it
-		is FALSE, it clears it (low).
+		If <bit> is true, sets the I2C data line high. If it
+		is false, it clears it (low).
 
 		eg: #define I2C_SDA(bit) \
 			if(bit) immr->im_cpm.cp_pbdat |=  PB_SDA; \
@@ -1946,8 +1976,8 @@ CBFS (Coreboot Filesystem) support
 
 		I2C_SCL(bit)
 
-		If <bit> is TRUE, sets the I2C clock line high. If it
-		is FALSE, it clears it (low).
+		If <bit> is true, sets the I2C clock line high. If it
+		is false, it clears it (low).
 
 		eg: #define I2C_SCL(bit) \
 			if(bit) immr->im_cpm.cp_pbdat |=  PB_SCL; \
@@ -2768,6 +2798,32 @@ FIT uImage format:
 		Adds the MTD partitioning infrastructure from the Linux
 		kernel. Needed for UBI support.
 
+- UBI support
+		CONFIG_CMD_UBI
+
+		Adds commands for interacting with MTD partitions formatted
+		with the UBI flash translation layer
+
+		Requires also defining CONFIG_RBTREE
+
+		CONFIG_UBI_SILENCE_MSG
+
+		Make the verbose messages from UBI stop printing.  This leaves
+		warnings and errors enabled.
+
+- UBIFS support
+		CONFIG_CMD_UBIFS
+
+		Adds commands for interacting with UBI volumes formatted as
+		UBIFS.  UBIFS is read-only in u-boot.
+
+		Requires UBI support as well as CONFIG_LZO
+
+		CONFIG_UBIFS_SILENCE_MSG
+
+		Make the verbose messages from UBIFS stop printing.  This leaves
+		warnings and errors enabled.
+
 - SPL framework
 		CONFIG_SPL
 		Enable building of SPL globally.
@@ -3487,6 +3543,33 @@ but it can not erase, write this NOR flash by SRIO or PCIE interface.
 	environment. If redundant environment is used, it will be copied to
 	CONFIG_NAND_ENV_DST + CONFIG_ENV_SIZE.
 
+- CONFIG_ENV_IS_IN_UBI:
+
+	Define this if you have an UBI volume that you want to use for the
+	environment.  This has the benefit of wear-leveling the environment
+	accesses, which is important on NAND.
+
+	- CONFIG_ENV_UBI_PART:
+
+	  Define this to a string that is the mtd partition containing the UBI.
+
+	- CONFIG_ENV_UBI_VOLUME:
+
+	  Define this to the name of the volume that you want to store the
+	  environment in.
+
+	- CONFIG_ENV_UBI_VOLUME_REDUND:
+
+	  Define this to the name of another volume to store a second copy of
+	  the environment in.  This will enable redundant environments in UBI.
+	  It is assumed that both volumes are in the same MTD partition.
+
+	- CONFIG_UBI_SILENCE_MSG
+	- CONFIG_UBIFS_SILENCE_MSG
+
+	  You will probably want to define these to avoid a really noisy system
+	  when storing the env in UBI.
+
 - CONFIG_SYS_SPI_INIT_OFFSET
 
 	Defines offset to the initial SPI buffer area in DPRAM. The

api/api_display.c

@@ -45,8 +45,8 @@ int display_get_info(int type, struct display_info *di)
 	case DISPLAY_TYPE_LCD:
 		di->pixel_width  = panel_info.vl_col;
 		di->pixel_height = panel_info.vl_row;
-		di->screen_rows = CONSOLE_ROWS;
-		di->screen_cols = CONSOLE_COLS;
+		di->screen_rows = lcd_get_screen_rows();
+		di->screen_cols = lcd_get_screen_columns();
 		break;
 #endif
 	}

arch/arm/cpu/arm926ejs/spear/spear600.c

@@ -28,9 +28,6 @@
 #include <asm/arch/spr_misc.h>
 #include <asm/arch/spr_defs.h>
 
-#define FALSE				0
-#define TRUE				(!FALSE)
-
 static void sel_1v8(void)
 {
 	struct misc_regs *misc_p = (struct misc_regs *)CONFIG_SPEAR_MISCBASE;
@@ -133,8 +130,8 @@ void soc_init(void)
 /*
  * xxx_boot_selected:
  *
- * return TRUE if the particular booting option is selected
- * return FALSE otherwise
+ * return true if the particular booting option is selected
+ * return false otherwise
  */
 static u32 read_bootstrap(void)
 {
@@ -150,18 +147,18 @@ int snor_boot_selected(void)
 		/* Check whether SNOR boot is selected */
 		if ((bootstrap & CONFIG_SPEAR_ONLYSNORBOOT) ==
 			CONFIG_SPEAR_ONLYSNORBOOT)
-			return TRUE;
+			return true;
 
 		if ((bootstrap & CONFIG_SPEAR_NORNANDBOOT) ==
 			CONFIG_SPEAR_NORNAND8BOOT)
-			return TRUE;
+			return true;
 
 		if ((bootstrap & CONFIG_SPEAR_NORNANDBOOT) ==
 			CONFIG_SPEAR_NORNAND16BOOT)
-			return TRUE;
+			return true;
 	}
 
-	return FALSE;
+	return false;
 }
 
 int nand_boot_selected(void)
@@ -172,20 +169,20 @@ int nand_boot_selected(void)
 		/* Check whether NAND boot is selected */
 		if ((bootstrap & CONFIG_SPEAR_NORNANDBOOT) ==
 			CONFIG_SPEAR_NORNAND8BOOT)
-			return TRUE;
+			return true;
 
 		if ((bootstrap & CONFIG_SPEAR_NORNANDBOOT) ==
 			CONFIG_SPEAR_NORNAND16BOOT)
-			return TRUE;
+			return true;
 	}
 
-	return FALSE;
+	return false;
 }
 
 int pnor_boot_selected(void)
 {
 	/* Parallel NOR boot is not selected in any SPEAr600 revision */
-	return FALSE;
+	return false;
 }
 
 int usb_boot_selected(void)
@@ -195,39 +192,39 @@ int usb_boot_selected(void)
 	if (USB_BOOT_SUPPORTED) {
 		/* Check whether USB boot is selected */
 		if (!(bootstrap & CONFIG_SPEAR_USBBOOT))
-			return TRUE;
+			return true;
 	}
 
-	return FALSE;
+	return false;
 }
 
 int tftp_boot_selected(void)
 {
 	/* TFTP boot is not selected in any SPEAr600 revision */
-	return FALSE;
+	return false;
 }
 
 int uart_boot_selected(void)
 {
 	/* UART boot is not selected in any SPEAr600 revision */
-	return FALSE;
+	return false;
 }
 
 int spi_boot_selected(void)
 {
 	/* SPI boot is not selected in any SPEAr600 revision */
-	return FALSE;
+	return false;
 }
 
 int i2c_boot_selected(void)
 {
 	/* I2C boot is not selected in any SPEAr600 revision */
-	return FALSE;
+	return false;
 }
 
 int mmc_boot_selected(void)
 {
-	return FALSE;
+	return false;
 }
 
 void plat_late_init(void)

arch/arm/cpu/arm926ejs/spear/spl_boot.c

@@ -120,7 +120,7 @@ u32 spl_boot(void)
 	/*
 	 * All the supported booting devices are listed here. Each of
 	 * the booting type supported by the platform would define the
-	 * macro xxx_BOOT_SUPPORTED to TRUE.
+	 * macro xxx_BOOT_SUPPORTED to true.
 	 */
 
 	if (SNOR_BOOT_SUPPORTED && snor_boot_selected()) {

arch/arm/cpu/pxa/Makefile

@@ -33,7 +33,6 @@ COBJS-$(CONFIG_CPU_PXA27X)	= pxa2xx.o
 COBJS-y	+= cpuinfo.o
 
 COBJS	= $(COBJS-y)
-COBJS	+= pxafb.o
 COBJS	+= timer.o
 COBJS	+= usb.o
 

arch/blackfin/include/asm/posix_types.h

@@ -61,9 +61,6 @@ typedef unsigned int __kernel_gid32_t;
 typedef unsigned short __kernel_old_uid_t;
 typedef unsigned short __kernel_old_gid_t;
 
-#define BOOL_WAS_DEFINED
-typedef enum { false = 0, true = 1 } bool;
-
 #ifdef __GNUC__
 typedef long long __kernel_loff_t;
 #endif

arch/m68k/lib/interrupts.c

@@ -96,7 +96,7 @@ int disable_interrupts (void)
 	sr = get_sr ();
 	set_sr (sr | 0x0700);
 
-	return ((sr & 0x0700) == 0);	/* return TRUE, if interrupts were enabled before */
+	return ((sr & 0x0700) == 0);	/* return true, if interrupts were enabled before */
 }
 
 void int_handler (struct pt_regs *fp)

arch/nds32/lib/interrupts.c

@@ -59,7 +59,7 @@ void enable_interrupts(void)
 
 /*
  * disable interrupts
- * Return TRUE if GIE is enabled before we disable it.
+ * Return true if GIE is enabled before we disable it.
  */
 int disable_interrupts(void)
 {

arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c

@@ -513,7 +513,7 @@ void fsl_serdes_init(void)
 	size_t arglen;
 #endif
 #ifdef CONFIG_SYS_P4080_ERRATUM_SERDES_A001
-	int need_serdes_a001;	/* TRUE == need work-around for SERDES A001 */
+	int need_serdes_a001;	/* true == need work-around for SERDES A001 */
 #endif
 #ifdef CONFIG_SYS_P4080_ERRATUM_SERDES8
 	char buffer[HWCONFIG_BUFFER_SIZE];

arch/powerpc/cpu/mpc8xx/Makefile

@@ -37,7 +37,6 @@ COBJS-y	+= fec.o
 COBJS-$(CONFIG_OF_LIBFDT) += fdt.o
 COBJS-y	+= i2c.o
 COBJS-y	+= interrupts.o
-COBJS-y	+= lcd.o
 COBJS-y	+= scc.o
 COBJS-y	+= serial.o
 COBJS-y	+= speed.o

arch/powerpc/cpu/mpc8xxx/fdt.c

@@ -167,6 +167,11 @@ void fdt_fixup_dr_usb(void *blob, bd_t *bd)
 				}
 			}
 
+			if (mode_idx < 0 || phy_idx < 0) {
+				puts("ERROR: wrong usb mode/phy defined!!\n");
+				return;
+			}
+
 			dr_mode_type = modes[mode_idx];
 			dr_phy_type = phys[phy_idx];
 

arch/powerpc/cpu/ppc4xx/44x_spd_ddr.c

@@ -88,8 +88,6 @@ void spd_ddr_init_hang (void) __attribute__((weak, alias("__spd_ddr_init_hang"))
 #define NUMMEMTESTS		8
 #define NUMMEMWORDS		8
 #define MAXBXCR			4
-#define TRUE			1
-#define FALSE			0
 
 /*
  * This DDR2 setup code can dynamically setup the TLB entries for the DDR2 memory
@@ -298,7 +296,7 @@ static void get_spd_info(unsigned long *dimm_populated,
 	unsigned char num_of_bytes;
 	unsigned char total_size;
 
-	dimm_found = FALSE;
+	dimm_found = false;
 	for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
 		num_of_bytes = 0;
 		total_size = 0;
@@ -307,16 +305,16 @@ static void get_spd_info(unsigned long *dimm_populated,
 		total_size = spd_read(iic0_dimm_addr[dimm_num], 1);
 
 		if ((num_of_bytes != 0) && (total_size != 0)) {
-			dimm_populated[dimm_num] = TRUE;
-			dimm_found = TRUE;
+			dimm_populated[dimm_num] = true;
+			dimm_found = true;
 			debug("DIMM slot %lu: populated\n", dimm_num);
 		} else {
-			dimm_populated[dimm_num] = FALSE;
+			dimm_populated[dimm_num] = false;
 			debug("DIMM slot %lu: Not populated\n", dimm_num);
 		}
 	}
 
-	if (dimm_found == FALSE) {
+	if (dimm_found == false) {
 		printf("ERROR - No memory installed. Install a DDR-SDRAM DIMM.\n\n");
 		spd_ddr_init_hang ();
 	}
@@ -330,7 +328,7 @@ static void check_mem_type(unsigned long *dimm_populated,
 	unsigned char dimm_type;
 
 	for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
-		if (dimm_populated[dimm_num] == TRUE) {
+		if (dimm_populated[dimm_num] == true) {
 			dimm_type = spd_read(iic0_dimm_addr[dimm_num], 2);
 			switch (dimm_type) {
 			case 7:
@@ -356,7 +354,7 @@ static void check_volt_type(unsigned long *dimm_populated,
 	unsigned long voltage_type;
 
 	for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
-		if (dimm_populated[dimm_num] == TRUE) {
+		if (dimm_populated[dimm_num] == true) {
 			voltage_type = spd_read(iic0_dimm_addr[dimm_num], 8);
 			if (voltage_type != 0x04) {
 				printf("ERROR: DIMM %lu with unsupported voltage level.\n",
@@ -398,12 +396,12 @@ static void program_cfg0(unsigned long *dimm_populated,
 	/*
 	 * FIXME: assume the DDR SDRAMs in both banks are the same
 	 */
-	ecc_enabled = TRUE;
+	ecc_enabled = true;
 	for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
-		if (dimm_populated[dimm_num] == TRUE) {
+		if (dimm_populated[dimm_num] == true) {
 			ecc = spd_read(iic0_dimm_addr[dimm_num], 11);
 			if (ecc != 0x02) {
-				ecc_enabled = FALSE;
+				ecc_enabled = false;
 			}
 
 			/*
@@ -437,7 +435,7 @@ static void program_cfg0(unsigned long *dimm_populated,
 	/*
 	 * program Memory Data Error Checking
 	 */
-	if (ecc_enabled == TRUE) {
+	if (ecc_enabled == true) {
 		cfg0 |= SDRAM_CFG0_MCHK_GEN;
 	} else {
 		cfg0 |= SDRAM_CFG0_MCHK_NON;
@@ -493,7 +491,7 @@ static void program_rtr(unsigned long *dimm_populated,
 	bus_period_x_10 = ONE_BILLION / (sys_info.freqPLB / 10);
 
 	for (dimm_num = 0;  dimm_num < num_dimm_banks; dimm_num++) {
-		if (dimm_populated[dimm_num] == TRUE) {
+		if (dimm_populated[dimm_num] == true) {
 			refresh_rate_type = 0x7F & spd_read(iic0_dimm_addr[dimm_num], 12);
 			switch (refresh_rate_type) {
 			case 0x00:
@@ -585,15 +583,15 @@ static void program_tr0(unsigned long *dimm_populated,
 	t_rp_ns = 0;
 	t_rcd_ns = 0;
 	t_ras_ns = 0;
-	cas_2_0_available = TRUE;
-	cas_2_5_available = TRUE;
-	cas_3_0_available = TRUE;
+	cas_2_0_available = true;
+	cas_2_5_available = true;
+	cas_3_0_available = true;
 	tcyc_2_0_ns_x_10 = 0;
 	tcyc_2_5_ns_x_10 = 0;
 	tcyc_3_0_ns_x_10 = 0;
 
 	for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
-		if (dimm_populated[dimm_num] == TRUE) {
+		if (dimm_populated[dimm_num] == true) {
 			wcsbc = spd_read(iic0_dimm_addr[dimm_num], 15);
 			t_rp_ns	 = spd_read(iic0_dimm_addr[dimm_num], 27) >> 2;
 			t_rcd_ns = spd_read(iic0_dimm_addr[dimm_num], 29) >> 2;
@@ -640,7 +638,7 @@ static void program_tr0(unsigned long *dimm_populated,
 				if (cas_index != 0) {
 					cas_index++;
 				}
-				cas_3_0_available = FALSE;
+				cas_3_0_available = false;
 			}
 
 			if (((cas_bit & 0x08) != 0) || (cas_index < 3)) {
@@ -650,7 +648,7 @@ static void program_tr0(unsigned long *dimm_populated,
 				if (cas_index != 0) {
 					cas_index++;
 				}
-				cas_2_5_available = FALSE;
+				cas_2_5_available = false;
 			}
 
 			if (((cas_bit & 0x04) != 0) || (cas_index < 3)) {
@@ -660,7 +658,7 @@ static void program_tr0(unsigned long *dimm_populated,
 				if (cas_index != 0) {
 					cas_index++;
 				}
-				cas_2_0_available = FALSE;
+				cas_2_0_available = false;
 			}
 
 			break;
@@ -683,13 +681,13 @@ static void program_tr0(unsigned long *dimm_populated,
 	/*
 	 * Program SD_CASL field
 	 */
-	if ((cas_2_0_available == TRUE) &&
+	if ((cas_2_0_available == true) &&
 	    (bus_period_x_10 >= tcyc_2_0_ns_x_10)) {
 		tr0 |= SDRAM_TR0_SDCL_2_0_CLK;
-	} else if ((cas_2_5_available == TRUE) &&
+	} else if ((cas_2_5_available == true) &&
 		 (bus_period_x_10 >= tcyc_2_5_ns_x_10)) {
 		tr0 |= SDRAM_TR0_SDCL_2_5_CLK;
-	} else if ((cas_3_0_available == TRUE) &&
+	} else if ((cas_3_0_available == true) &&
 		 (bus_period_x_10 >= tcyc_3_0_ns_x_10)) {
 		tr0 |= SDRAM_TR0_SDCL_3_0_CLK;
 	} else {
@@ -950,9 +948,9 @@ static void program_tr1(void)
 	current_fail_length = 0;
 	current_start = 0;
 	rdclt_offset = 0;
-	window_found = FALSE;
-	fail_found = FALSE;
-	pass_found = FALSE;
+	window_found = false;
+	fail_found = false;
+	pass_found = false;
 	debug("Starting memory test ");
 
 	for (k = 0; k < NUMHALFCYCLES; k++) {
@@ -963,8 +961,8 @@ static void program_tr1(void)
 			mtsdram(SDRAM0_TR1, (tr1 | SDRAM_TR1_RDCT_ENCODE(rdclt)));
 
 			if (short_mem_test()) {
-				if (fail_found == TRUE) {
-					pass_found = TRUE;
+				if (fail_found == true) {
+					pass_found = true;
 					if (current_pass_length == 0) {
 						current_start = rdclt_offset + rdclt;
 					}
@@ -983,10 +981,10 @@ static void program_tr1(void)
 				current_fail_length++;
 
 				if (current_fail_length >= (dly_val>>2)) {
-					if (fail_found == FALSE) {
-						fail_found = TRUE;
-					} else if (pass_found == TRUE) {
-						window_found = TRUE;
+					if (fail_found == false) {
+						fail_found = true;
+					} else if (pass_found == true) {
+						window_found = true;
 						break;
 					}
 				}
@@ -994,9 +992,8 @@ static void program_tr1(void)
 		}
 		debug(".");
 
-		if (window_found == TRUE) {
+		if (window_found == true)
 			break;
-		}
 
 		tr1 = tr1 ^ SDRAM_TR1_RDCD_MASK;
 		rdclt_offset += dly_val;
@@ -1006,7 +1003,7 @@ static void program_tr1(void)
 	/*
 	 * make sure we find the window
 	 */
-	if (window_found == FALSE) {
+	if (window_found == false) {
 		printf("ERROR: Cannot determine a common read delay.\n");
 		spd_ddr_init_hang ();
 	}
@@ -1115,7 +1112,7 @@ static unsigned long program_bxcr(unsigned long *dimm_populated,
 	bank_base_addr = CONFIG_SYS_SDRAM_BASE;
 
 	for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
-		if (dimm_populated[dimm_num] == TRUE) {
+		if (dimm_populated[dimm_num] == true) {
 			num_row_addr = spd_read(iic0_dimm_addr[dimm_num], 3);
 			num_col_addr = spd_read(iic0_dimm_addr[dimm_num], 4);
 			num_banks    = spd_read(iic0_dimm_addr[dimm_num], 5);

arch/powerpc/cpu/ppc4xx/44x_spd_ddr2.c

@@ -241,13 +241,6 @@ void board_add_ram_info(int use_default)
 /*-----------------------------------------------------------------------------+
  * Defines
  *-----------------------------------------------------------------------------*/
-#ifndef	TRUE
-#define TRUE		1
-#endif
-#ifndef FALSE
-#define FALSE		0
-#endif
-
 #define SDRAM_DDR1	1
 #define SDRAM_DDR2	2
 #define SDRAM_NONE	0
@@ -683,7 +676,7 @@ static void get_spd_info(unsigned long *dimm_populated,
 	unsigned char num_of_bytes;
 	unsigned char total_size;
 
-	dimm_found = FALSE;
+	dimm_found = false;
 	for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
 		num_of_bytes = 0;
 		total_size = 0;
@@ -696,16 +689,16 @@ static void get_spd_info(unsigned long *dimm_populated,
 		      iic0_dimm_addr[dimm_num], total_size);
 
 		if ((num_of_bytes != 0) && (total_size != 0)) {
-			dimm_populated[dimm_num] = TRUE;
-			dimm_found = TRUE;
+			dimm_populated[dimm_num] = true;
+			dimm_found = true;
 			debug("DIMM slot %lu: populated\n", dimm_num);
 		} else {
-			dimm_populated[dimm_num] = FALSE;
+			dimm_populated[dimm_num] = false;
 			debug("DIMM slot %lu: Not populated\n", dimm_num);
 		}
 	}
 
-	if (dimm_found == FALSE) {
+	if (dimm_found == false) {
 		printf("ERROR - No memory installed. Install a DDR-SDRAM DIMM.\n\n");
 		spd_ddr_init_hang ();
 	}
@@ -724,7 +717,7 @@ static void check_mem_type(unsigned long *dimm_populated,
 	unsigned long dimm_type;
 
 	for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
-		if (dimm_populated[dimm_num] == TRUE) {
+		if (dimm_populated[dimm_num] == true) {
 			dimm_type = spd_read(iic0_dimm_addr[dimm_num], 2);
 			switch (dimm_type) {
 			case 1:
@@ -994,14 +987,14 @@ static void program_copt1(unsigned long *dimm_populated,
 	unsigned long val;
 
 #ifdef CONFIG_DDR_ECC
-	ecc_enabled = TRUE;
+	ecc_enabled = true;
 #else
-	ecc_enabled = FALSE;
+	ecc_enabled = false;
 #endif
-	dimm_32bit = FALSE;
-	dimm_64bit = FALSE;
-	buf0 = FALSE;
-	buf1 = FALSE;
+	dimm_32bit = false;
+	dimm_64bit = false;
+	buf0 = false;
+	buf1 = false;
 
 	/*------------------------------------------------------------------
 	 * Set memory controller options reg 1, SDRAM_MCOPT1.
@@ -1026,7 +1019,7 @@ static void program_copt1(unsigned long *dimm_populated,
 			/* test ecc support */
 			ecc = (unsigned long)spd_read(iic0_dimm_addr[dimm_num], 11);
 			if (ecc != 0x02) /* ecc not supported */
-				ecc_enabled = FALSE;
+				ecc_enabled = false;
 
 			/* test bank count */
 			bankcount = (unsigned long)spd_read(iic0_dimm_addr[dimm_num], 17);
@@ -1048,15 +1041,15 @@ static void program_copt1(unsigned long *dimm_populated,
 				if (registered == 1) { /* DDR2 always buffered */
 					/* TODO: what about above  comments ? */
 					mcopt1 |= SDRAM_MCOPT1_RDEN;
-					buf0 = TRUE;
+					buf0 = true;
 				} else {
 					/* TODO: the mask 0x02 doesn't match Samsung def for byte 21. */
 					if ((attribute & 0x02) == 0x00) {
 						/* buffered not supported */
-						buf0 = FALSE;
+						buf0 = false;
 					} else {
 						mcopt1 |= SDRAM_MCOPT1_RDEN;
-						buf0 = TRUE;
+						buf0 = true;
 					}
 				}
 			}
@@ -1068,14 +1061,14 @@ static void program_copt1(unsigned long *dimm_populated,
 				if (registered == 1) {
 					/* DDR2 always buffered */
 					mcopt1 |= SDRAM_MCOPT1_RDEN;
-					buf1 = TRUE;
+					buf1 = true;
 				} else {
 					if ((attribute & 0x02) == 0x00) {
 						/* buffered not supported */
-						buf1 = FALSE;
+						buf1 = false;
 					} else {
 						mcopt1 |= SDRAM_MCOPT1_RDEN;
-						buf1 = TRUE;
+						buf1 = true;
 					}
 				}
 			}
@@ -1087,11 +1080,11 @@ static void program_copt1(unsigned long *dimm_populated,
 			switch (data_width) {
 			case 72:
 			case 64:
-				dimm_64bit = TRUE;
+				dimm_64bit = true;
 				break;
 			case 40:
 			case 32:
-				dimm_32bit = TRUE;
+				dimm_32bit = true;
 				break;
 			default:
 				printf("WARNING: Detected a DIMM with a data width of %lu bits.\n",
@@ -1110,20 +1103,19 @@ static void program_copt1(unsigned long *dimm_populated,
 		}
 	}
 
-	if ((dimm_64bit == TRUE) && (dimm_32bit == TRUE)) {
+	if ((dimm_64bit == true) && (dimm_32bit == true)) {
 		printf("ERROR: Cannot mix 32 bit and 64 bit DDR-SDRAM DIMMs together.\n");
 		spd_ddr_init_hang ();
-	}
-	else if ((dimm_64bit == TRUE) && (dimm_32bit == FALSE)) {
+	} else if ((dimm_64bit == true) && (dimm_32bit == false)) {
 		mcopt1 |= SDRAM_MCOPT1_DMWD_64;
-	} else if ((dimm_64bit == FALSE) && (dimm_32bit == TRUE)) {
+	} else if ((dimm_64bit == false) && (dimm_32bit == true)) {
 		mcopt1 |= SDRAM_MCOPT1_DMWD_32;
 	} else {
 		printf("ERROR: Please install only 32 or 64 bit DDR-SDRAM DIMMs.\n\n");
 		spd_ddr_init_hang ();
 	}
 
-	if (ecc_enabled == TRUE)
+	if (ecc_enabled == true)
 		mcopt1 |= SDRAM_MCOPT1_MCHK_GEN;
 	else
 		mcopt1 |= SDRAM_MCOPT1_MCHK_NON;
@@ -1171,14 +1163,14 @@ static void program_codt(unsigned long *dimm_populated,
 			total_rank += dimm_rank;
 			total_dimm++;
 			if ((dimm_num == 0) && (total_dimm == 1))
-				firstSlot = TRUE;
+				firstSlot = true;
 			else
-				firstSlot = FALSE;
+				firstSlot = false;
 		}
 	}
 	if (dimm_type == SDRAM_DDR2) {
 		codt |= SDRAM_CODT_DQS_1_8_V_DDR2;
-		if ((total_dimm == 1) && (firstSlot == TRUE)) {
+		if ((total_dimm == 1) && (firstSlot == true)) {
 			if (total_rank == 1) {	/* PUUU */
 				codt |= CALC_ODT_R(0);
 				modt0 = CALC_ODT_W(0);
@@ -1193,7 +1185,7 @@ static void program_codt(unsigned long *dimm_populated,
 				modt2 = 0x00000000;
 				modt3 = 0x00000000;
 			}
-		} else if ((total_dimm == 1) && (firstSlot != TRUE)) {
+		} else if ((total_dimm == 1) && (firstSlot != true)) {
 			if (total_rank == 1) {	/* UUPU */
 				codt |= CALC_ODT_R(2);
 				modt0 = 0x00000000;
@@ -1467,26 +1459,26 @@ static void program_mode(unsigned long *dimm_populated,
 	 * the dimm modules installed.
 	 *-----------------------------------------------------------------*/
 	t_wr_ns = 0;
-	cas_2_0_available = TRUE;
-	cas_2_5_available = TRUE;
-	cas_3_0_available = TRUE;
-	cas_4_0_available = TRUE;
-	cas_5_0_available = TRUE;
+	cas_2_0_available = true;
+	cas_2_5_available = true;
+	cas_3_0_available = true;
+	cas_4_0_available = true;
+	cas_5_0_available = true;
 	max_2_0_tcyc_ns_x_100 = 10;
 	max_2_5_tcyc_ns_x_100 = 10;
 	max_3_0_tcyc_ns_x_100 = 10;
 	max_4_0_tcyc_ns_x_100 = 10;
 	max_5_0_tcyc_ns_x_100 = 10;
-	sdram_ddr1 = TRUE;
+	sdram_ddr1 = true;
 
 	/* loop through all the DIMM slots on the board */
 	for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
 		/* If a dimm is installed in a particular slot ... */
 		if (dimm_populated[dimm_num] != SDRAM_NONE) {
 			if (dimm_populated[dimm_num] == SDRAM_DDR1)
-				sdram_ddr1 = TRUE;
+				sdram_ddr1 = true;
 			else
-				sdram_ddr1 = FALSE;
+				sdram_ddr1 = false;
 
 			cas_bit = spd_read(iic0_dimm_addr[dimm_num], 18);
 			debug("cas_bit[SPD byte 18]=%02lx\n", cas_bit);
@@ -1543,7 +1535,7 @@ static void program_mode(unsigned long *dimm_populated,
 				} else {
 					if (cas_index != 0)
 						cas_index++;
-					cas_4_0_available = FALSE;
+					cas_4_0_available = false;
 				}
 
 				if (((cas_bit & 0x10) == 0x10) && (cas_index < 3) &&
@@ -1554,7 +1546,7 @@ static void program_mode(unsigned long *dimm_populated,
 				} else {
 					if (cas_index != 0)
 						cas_index++;
-					cas_3_0_available = FALSE;
+					cas_3_0_available = false;
 				}
 
 				if (((cas_bit & 0x08) == 0x08) && (cas_index < 3) &&
@@ -1565,7 +1557,7 @@ static void program_mode(unsigned long *dimm_populated,
 				} else {
 					if (cas_index != 0)
 						cas_index++;
-					cas_2_5_available = FALSE;
+					cas_2_5_available = false;
 				}
 
 				if (((cas_bit & 0x04) == 0x04) && (cas_index < 3) &&
@@ -1576,7 +1568,7 @@ static void program_mode(unsigned long *dimm_populated,
 				} else {
 					if (cas_index != 0)
 						cas_index++;
-					cas_2_0_available = FALSE;
+					cas_2_0_available = false;
 				}
 			} else {
 				/*
@@ -1592,7 +1584,7 @@ static void program_mode(unsigned long *dimm_populated,
 				} else {
 					if (cas_index != 0)
 						cas_index++;
-					cas_5_0_available = FALSE;
+					cas_5_0_available = false;
 				}
 
 				if (((cas_bit & 0x10) == 0x10) && (cas_index < 3) &&
@@ -1603,7 +1595,7 @@ static void program_mode(unsigned long *dimm_populated,
 				} else {
 					if (cas_index != 0)
 						cas_index++;
-					cas_4_0_available = FALSE;
+					cas_4_0_available = false;
 				}
 
 				if (((cas_bit & 0x08) == 0x08) && (cas_index < 3) &&
@@ -1614,7 +1606,7 @@ static void program_mode(unsigned long *dimm_populated,
 				} else {
 					if (cas_index != 0)
 						cas_index++;
-					cas_3_0_available = FALSE;
+					cas_3_0_available = false;
 				}
 			}
 		}
@@ -1636,14 +1628,17 @@ static void program_mode(unsigned long *dimm_populated,
 	debug("cycle_4_0_clk=%lu\n", cycle_4_0_clk);
 	debug("cycle_5_0_clk=%lu\n", cycle_5_0_clk);
 
-	if (sdram_ddr1 == TRUE) { /* DDR1 */
-		if ((cas_2_0_available == TRUE) && (sdram_freq <= cycle_2_0_clk)) {
+	if (sdram_ddr1 == true) { /* DDR1 */
+		if ((cas_2_0_available == true) &&
+			(sdram_freq <= cycle_2_0_clk)) {
 			mmode |= SDRAM_MMODE_DCL_DDR1_2_0_CLK;
 			*selected_cas = DDR_CAS_2;
-		} else if ((cas_2_5_available == TRUE) && (sdram_freq <= cycle_2_5_clk)) {
+		} else if ((cas_2_5_available == true) &&
+			(sdram_freq <= cycle_2_5_clk)) {
 			mmode |= SDRAM_MMODE_DCL_DDR1_2_5_CLK;
 			*selected_cas = DDR_CAS_2_5;
-		} else if ((cas_3_0_available == TRUE) && (sdram_freq <= cycle_3_0_clk)) {
+		} else if ((cas_3_0_available == true) &&
+			(sdram_freq <= cycle_3_0_clk)) {
 			mmode |= SDRAM_MMODE_DCL_DDR1_3_0_CLK;
 			*selected_cas = DDR_CAS_3;
 		} else {
@@ -1656,13 +1651,16 @@ static void program_mode(unsigned long *dimm_populated,
 		debug("cas_3_0_available=%d\n", cas_3_0_available);
 		debug("cas_4_0_available=%d\n", cas_4_0_available);
 		debug("cas_5_0_available=%d\n", cas_5_0_available);
-		if ((cas_3_0_available == TRUE) && (sdram_freq <= cycle_3_0_clk)) {
+		if ((cas_3_0_available == true) &&
+			(sdram_freq <= cycle_3_0_clk)) {
 			mmode |= SDRAM_MMODE_DCL_DDR2_3_0_CLK;
 			*selected_cas = DDR_CAS_3;
-		} else if ((cas_4_0_available == TRUE) && (sdram_freq <= cycle_4_0_clk)) {
+		} else if ((cas_4_0_available == true) &&
+			(sdram_freq <= cycle_4_0_clk)) {
 			mmode |= SDRAM_MMODE_DCL_DDR2_4_0_CLK;
 			*selected_cas = DDR_CAS_4;
-		} else if ((cas_5_0_available == TRUE) && (sdram_freq <= cycle_5_0_clk)) {
+		} else if ((cas_5_0_available == true) &&
+			(sdram_freq <= cycle_5_0_clk)) {
 			mmode |= SDRAM_MMODE_DCL_DDR2_5_0_CLK;
 			*selected_cas = DDR_CAS_5;
 		} else {
@@ -1677,7 +1675,7 @@ static void program_mode(unsigned long *dimm_populated,
 		}
 	}
 
-	if (sdram_ddr1 == TRUE)
+	if (sdram_ddr1 == true)
 		mmode |= SDRAM_MMODE_WR_DDR1;
 	else {
 
@@ -1851,16 +1849,16 @@ static void program_tr(unsigned long *dimm_populated,
 	t_wpc_ns = 0;
 	t_wtr_ns = 0;
 	t_rpc_ns = 0;
-	sdram_ddr1 = TRUE;
+	sdram_ddr1 = true;
 
 	/* loop through all the DIMM slots on the board */
 	for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
 		/* If a dimm is installed in a particular slot ... */
 		if (dimm_populated[dimm_num] != SDRAM_NONE) {
 			if (dimm_populated[dimm_num] == SDRAM_DDR2)
-				sdram_ddr1 = TRUE;
+				sdram_ddr1 = true;
 			else
-				sdram_ddr1 = FALSE;
+				sdram_ddr1 = false;
 
 			t_rcd_ns = max(t_rcd_ns, spd_read(iic0_dimm_addr[dimm_num], 29) >> 2);
 			t_rrd_ns = max(t_rrd_ns, spd_read(iic0_dimm_addr[dimm_num], 28) >> 2);
@@ -1925,7 +1923,7 @@ static void program_tr(unsigned long *dimm_populated,
 		break;
 	}
 
-	if (sdram_ddr1 == TRUE) { /* DDR1 */
+	if (sdram_ddr1 == true) { /* DDR1 */
 		if (sdram_freq < 200000000) {
 			sdtr2 |= SDRAM_SDTR2_WTR_1_CLK;
 			sdtr2 |= SDRAM_SDTR2_WPC_2_CLK;
@@ -2548,8 +2546,8 @@ calibration_loop:
 	current_pass_length = 0;
 	current_fail_length = 0;
 	current_start = 0;
-	fail_found = FALSE;
-	pass_found = FALSE;
+	fail_found = false;
+	pass_found = false;
 
 	/*
 	 * get the delay line calibration register value
@@ -2570,8 +2568,8 @@ calibration_loop:
 		 * See if the rffd value passed.
 		 *-----------------------------------------------------------------*/
 		if (short_mem_test()) {
-			if (fail_found == TRUE) {
-				pass_found = TRUE;
+			if (fail_found == true) {
+				pass_found = true;
 				if (current_pass_length == 0)
 					current_start = rffd;
 
@@ -2589,11 +2587,10 @@ calibration_loop:
 			current_fail_length++;
 
 			if (current_fail_length >= (dly_val >> 2)) {
-				if (fail_found == FALSE) {
-					fail_found = TRUE;
-				} else if (pass_found == TRUE) {
+				if (fail_found == false)
+					fail_found = true;
+				else if (pass_found == true)
 					break;
-				}
 			}
 		}
 	}		/* for rffd */
@@ -2618,9 +2615,9 @@ calibration_loop:
 	current_pass_length = 0;
 	current_fail_length = 0;
 	current_start = 0;
-	window_found = FALSE;
-	fail_found = FALSE;
-	pass_found = FALSE;
+	window_found = false;
+	fail_found = false;
+	pass_found = false;
 
 	for (rqfd = 0; rqfd <= SDRAM_RQDC_RQFD_MAX; rqfd++) {
 		mfsdram(SDRAM_RQDC, rqdc_reg);
@@ -2635,8 +2632,8 @@ calibration_loop:
 		 * See if the rffd value passed.
 		 *-----------------------------------------------------------------*/
 		if (short_mem_test()) {
-			if (fail_found == TRUE) {
-				pass_found = TRUE;
+			if (fail_found == true) {
+				pass_found = true;
 				if (current_pass_length == 0)
 					current_start = rqfd;
 
@@ -2653,10 +2650,10 @@ calibration_loop:
 			current_pass_length = 0;
 			current_fail_length++;
 
-			if (fail_found == FALSE) {
-				fail_found = TRUE;
-			} else if (pass_found == TRUE) {
-				window_found = TRUE;
+			if (fail_found == false) {
+				fail_found = true;
+			} else if (pass_found == true) {
+				window_found = true;
 				break;
 			}
 		}
@@ -2667,7 +2664,7 @@ calibration_loop:
 	/*------------------------------------------------------------------
 	 * Make sure we found the valid read passing window.  Halt if not
 	 *-----------------------------------------------------------------*/
-	if (window_found == FALSE) {
+	if (window_found == false) {
 		if (rqfd_start < SDRAM_RQDC_RQFD_MAX) {
 			putc('\b');
 			putc(slash[loopi++ % 8]);
@@ -2769,13 +2766,13 @@ static void test(void)
 	mtsdram(SDRAM_MCOPT1, (val & ~SDRAM_MCOPT1_MCHK_MASK) |
 		SDRAM_MCOPT1_MCHK_NON);
 
-	window_found = FALSE;
-	begin_found[0] = FALSE;
-	end_found[0] = FALSE;
-	search_end[0] = FALSE;
-	begin_found[1] = FALSE;
-	end_found[1] = FALSE;
-	search_end[1] = FALSE;
+	window_found = false;
+	begin_found[0] = false;
+	end_found[0] = false;
+	search_end[0] = false;
+	begin_found[1] = false;
+	end_found[1] = false;
+	search_end[1] = false;
 
 	for (dimm_num = 0; dimm_num < MAXDIMMS; dimm_num++) {
 		mfsdram(SDRAM_MB0CF + (bxcr_num << 2), bxcf[bxcr_num]);
@@ -2812,32 +2809,32 @@ static void test(void)
 			 * See if the rffd value passed.
 			 *-----------------------------------------------------------------*/
 			if (i < NUMMEMTESTS) {
-				if ((end_found[dimm_num] == FALSE) &&
-				    (search_end[dimm_num] == TRUE)) {
-					end_found[dimm_num] = TRUE;
+				if ((end_found[dimm_num] == false) &&
+				    (search_end[dimm_num] == true)) {
+					end_found[dimm_num] = true;
 				}
-				if ((end_found[0] == TRUE) &&
-				    (end_found[1] == TRUE))
+				if ((end_found[0] == true) &&
+				    (end_found[1] == true))
 					break;
 			} else {
-				if (begin_found[dimm_num] == FALSE) {
-					begin_found[dimm_num] = TRUE;
-					search_end[dimm_num] = TRUE;
+				if (begin_found[dimm_num] == false) {
+					begin_found[dimm_num] = true;
+					search_end[dimm_num] = true;
 				}
 			}
 		} else {
-			begin_found[dimm_num] = TRUE;
-			end_found[dimm_num] = TRUE;
+			begin_found[dimm_num] = true;
+			end_found[dimm_num] = true;
 		}
 	}
 
-	if ((begin_found[0] == TRUE) && (begin_found[1] == TRUE))
-		window_found = TRUE;
+	if ((begin_found[0] == true) && (begin_found[1] == true))
+		window_found = true;
 
 	/*------------------------------------------------------------------
 	 * Make sure we found the valid read passing window.  Halt if not
 	 *-----------------------------------------------------------------*/
-	if (window_found == FALSE) {
+	if (window_found == false) {
 		printf("ERROR: Cannot determine a common read delay for the "
 		       "DIMM(s) installed.\n");
 		spd_ddr_init_hang ();

arch/powerpc/cpu/ppc4xx/denali_spd_ddr2.c

@@ -53,13 +53,6 @@
 /*-----------------------------------------------------------------------------+
  * Defines
  *-----------------------------------------------------------------------------*/
-#ifndef	TRUE
-#define TRUE		1
-#endif
-#ifndef FALSE
-#define FALSE		0
-#endif
-
 #define MAXDIMMS	2
 #define MAXRANKS	2
 
@@ -279,7 +272,7 @@ static void get_spd_info(unsigned long dimm_ranks[],
 			 unsigned long num_dimm_banks)
 {
 	unsigned long dimm_num;
-	unsigned long dimm_found = FALSE;
+	unsigned long dimm_found = false;
 	unsigned long const max_ranks_per_dimm = (1 == num_dimm_banks) ? 2 : 1;
 	unsigned char num_of_bytes;
 	unsigned char total_size;
@@ -334,7 +327,7 @@ static void get_spd_info(unsigned long dimm_ranks[],
 				       "\n\n");
 				spd_ddr_init_hang();
 			}
-			dimm_found = TRUE;
+			dimm_found = true;
 			debug("DIMM slot %lu: populated with %lu-rank DDR2 DIMM"
 			      "\n", dimm_num, ranks_on_dimm);
 			if (ranks_on_dimm > max_ranks_per_dimm) {
@@ -355,7 +348,7 @@ static void get_spd_info(unsigned long dimm_ranks[],
 			debug("DIMM slot %lu: Not populated\n", dimm_num);
 		}
 	}
-	if (dimm_found == FALSE) {
+	if (dimm_found == false) {
 		printf("ERROR: No memory installed.\n");
 		printf("Install at least one DDR2 DIMM.\n\n");
 		spd_ddr_init_hang();
@@ -882,7 +875,7 @@ static void program_ddr0_22(unsigned long dimm_ranks[],
 			/* Check for ECC */
 			if (0 == (spd_read(iic0_dimm_addr[dimm_num], 11) &
 				  0x02)) {
-				ecc_available = FALSE;
+				ecc_available = false;
 			}
 		}
 	}

arch/powerpc/lib/ticks.S

@@ -50,19 +50,24 @@ wait_ticks:
 	stwu	r1, -16(r1)
 	mflr	r0		/* save link register */
 	stw	r0, 20(r1)	/* Use r0 or GDB will be unhappy */
-	mr	r7, r3		/* save tick count */
+	stw	r14, 12(r1)	/* save used registers */
+	stw	r15, 8(r1)
+	mr	r14, r3		/* save tick count */
 	bl	get_ticks	/* Get start time */
 
 	/* Calculate end time */
-	addc    r7, r4, r7	/* Compute end time lower */
-	addze	r6, r3		/*     and end time upper */
+	addc    r14, r4, r14	/* Compute end time lower */
+	addze	r15, r3		/*     and end time upper */
 
 	WATCHDOG_RESET		/* Trigger watchdog, if needed */
 1:	bl	get_ticks	/* Get current time */
-	subfc	r4, r4, r7	/* Subtract current time from end time */
-	subfe.	r3, r3, r6
+	subfc	r4, r4, r14	/* Subtract current time from end time */
+	subfe.	r3, r3, r15
 	bge	1b		/* Loop until time expired */
 
-	mtlr	r0		/* restore link register */
+	lwz     r15, 8(r1)	/* restore saved registers */
+	lwz     r14, 12(r1)
+	lwz     r0, 20(r1)
 	addi	r1,r1,16
+	mtlr	r0
 	blr

board/LEOX/elpt860/u-boot.lds.debug

@@ -134,6 +134,6 @@ SECTIONS
    *(.bss)
    *(COMMON)
   }
-  __bss_end__ = . ;
+  __bss_end = . ;
   PROVIDE (end = .);
 }

board/Marvell/common/memory.c

@@ -383,7 +383,7 @@ unsigned int memoryGetDeviceWidth (DEVICE device)
 * OUTPUT:
 *       None.
 * RETURN:
-*       False for invalid size, true otherwise.
+*       false for invalid size, true otherwise.
 *
 * CAUTION: PCI_functions must be implemented later To_do !!!!!!!!!!!!!!!!!
 *
@@ -509,7 +509,7 @@ bool memoryMapBank (MEMORY_BANK bank, unsigned int bankBase,
 *       None.
 *
 * RETURN:
-*       False for invalid size, true otherwise.
+*       false for invalid size, true otherwise.
 *
 * CAUTION: PCI_functions must be implemented later To_do !!!!!!!!!!!!!!!!!
 *
@@ -624,7 +624,7 @@ bool memoryMapDeviceSpace (DEVICE device, unsigned int deviceBase,
 *       None.
 *
 * RETURN:
-*       False for invalid size, true otherwise.
+*       false for invalid size, true otherwise.
 *
 *******************************************************************************/
 bool memorySetPciWindow (PCI_MEM_WINDOW pciWindow, unsigned int pciWindowBase,
@@ -885,7 +885,7 @@ void gtMemorySetInternalSramBaseAddr (unsigned int sramBaseAddress)
 *       None.
 *
 * RETURN:
-*       False for invalid size, true otherwise.
+*       false for invalid size, true otherwise.
 *
 *******************************************************************************/
 bool memorySetProtectRegion (MEMORY_PROTECT_WINDOW window,
@@ -1380,7 +1380,7 @@ void MemoryEnableWindow (MEMORY_WINDOW window)
 * OUTPUT:
 *       None.
 * RETURN:
-*       True for a closed window, false otherwise .
+*       true for a closed window, false otherwise .
 *******************************************************************************/
 MEMORY_WINDOW_STATUS MemoryGetMemWindowStatus (MEMORY_WINDOW window)
 {

board/Marvell/db64360/mpsc.c

@@ -966,7 +966,7 @@ static int galmpsc_set_snoop (int mpsc, int value)
 *       None.
 *
 * RETURN:
-*       True for success, false otherwise.
+*       true for success, false otherwise.
 *
 *******************************************************************************/
 

board/Marvell/db64360/mv_eth.h

@@ -46,13 +46,6 @@
 **************************************************************************
 **************************************************************************
 *************************************************************************/
-#ifndef TRUE
-#define TRUE 1
-#endif
-#ifndef FALSE
-#define FALSE 0
-#endif
-
 /* In case not using SG on Tx, define MAX_SKB_FRAGS as 0 */
 #ifndef MAX_SKB_FRAGS
 #define MAX_SKB_FRAGS 0

board/Marvell/db64460/mpsc.c

@@ -966,7 +966,7 @@ static int galmpsc_set_snoop (int mpsc, int value)
 *       None.
 *
 * RETURN:
-*       True for success, false otherwise.
+*       true for success, false otherwise.
 *
 *******************************************************************************/
 

board/Marvell/db64460/mv_eth.h

@@ -47,13 +47,6 @@
 **************************************************************************
 **************************************************************************
 *************************************************************************/
-#ifndef TRUE
-#define TRUE 1
-#endif
-#ifndef FALSE
-#define FALSE 0
-#endif
-
 /* In case not using SG on Tx, define MAX_SKB_FRAGS as 0 */
 #ifndef MAX_SKB_FRAGS
 #define MAX_SKB_FRAGS 0

board/Marvell/include/core.h

@@ -91,11 +91,6 @@ extern unsigned int INTERNAL_REG_BASE_ADDR;
 #define _1G		0x40000000
 #define _2G		0x80000000
 
-#ifndef	BOOL_WAS_DEFINED
-#define BOOL_WAS_DEFINED
-typedef enum _bool{false,true} bool;
-#endif
-
 /* Little to Big endian conversion macros */
 
 #ifdef LE /* Little Endian */

board/RPXClassic/u-boot.lds.debug

@@ -132,6 +132,6 @@ SECTIONS
    *(.bss)
    *(COMMON)
   }
-  __bss_end__ = . ;
+  __bss_end = . ;
   PROVIDE (end = .);
 }

board/RPXlite/u-boot.lds.debug

@@ -132,6 +132,6 @@ SECTIONS
    *(.bss)
    *(COMMON)
   }
-  __bss_end__ = . ;
+  __bss_end = . ;
   PROVIDE (end = .);
 }

board/RPXlite_dw/u-boot.lds.debug

@@ -132,6 +132,6 @@ SECTIONS
    *(.bss)
    *(COMMON)
   }
-  __bss_end__ = . ;
+  __bss_end = . ;
   PROVIDE (end = .);
 }

board/ait/cam_enc_4xx/cam_enc_4xx.c

@@ -561,7 +561,8 @@ static char *menu_handle(struct menu_display *display)
 	char *s;
 	char temp[6][200];
 
-	m = menu_create(display->title, display->timeout, 1, ait_menu_print);
+	m = menu_create(display->title, display->timeout, 1, ait_menu_print,
+			NULL, NULL);
 
 	for (i = 0; display->menulist[i]; i++) {
 		sprintf(key, "%d", i + 1);

board/amcc/bamboo/bamboo.c

@@ -477,16 +477,16 @@ int is_powerpc440ep_pass1(void)
 	pvr = get_pvr();
 
 	if (pvr == PVR_POWERPC_440EP_PASS1)
-		return TRUE;
+		return true;
 	else if (pvr == PVR_POWERPC_440EP_PASS2)
-		return FALSE;
+		return false;
 	else {
 		printf("brdutil error 3\n");
 		for (;;)
 			;
 	}
 
-	return(FALSE);
+	return false;
 }
 
 /*----------------------------------------------------------------------------+
@@ -495,9 +495,9 @@ int is_powerpc440ep_pass1(void)
 int is_nand_selected(void)
 {
 #ifdef CONFIG_BAMBOO_NAND
-	return TRUE;
+	return true;
 #else
-	return FALSE;
+	return false;
 #endif
 }
 
@@ -507,7 +507,7 @@ int is_nand_selected(void)
 unsigned char config_on_ebc_cs4_is_small_flash(void)
 {
 	/* Not implemented yet => returns constant value */
-	return TRUE;
+	return true;
 }
 
 /*----------------------------------------------------------------------------+
@@ -561,7 +561,7 @@ void ext_bus_cntlr_init(void)
 	/*-------------------------------------------------------------------------+
 	  |  PPC440EP Pass1
 	  +-------------------------------------------------------------------------*/
-	if (is_powerpc440ep_pass1() == TRUE) {
+	if (is_powerpc440ep_pass1() == true) {
 		switch(bootstrap_settings) {
 		case SDR0_PSTRP0_BOOTSTRAP_SETTINGS0:
 			/* Default Strap Settings 0 : CPU 400 - PLB 133 - Boot EBC 8 bit 33MHz */
@@ -738,7 +738,7 @@ void ext_bus_cntlr_init(void)
 		/*------------------------------------------------------------------------- */
 		ebc0_cs0_bnap_value = EBC0_BNAP_SMALL_FLASH;
 		ebc0_cs0_bncr_value = EBC0_BNCR_SMALL_FLASH_CS0;
-		if ((is_nand_selected()) == TRUE) {
+		if ((is_nand_selected()) == true) {
 			/* NAND Flash */
 			ebc0_cs1_bnap_value = EBC0_BNAP_NAND_FLASH;
 			ebc0_cs1_bncr_value = EBC0_BNCR_NAND_FLASH_CS1;
@@ -765,7 +765,7 @@ void ext_bus_cntlr_init(void)
 		/*------------------------------------------------------------------------- */
 		ebc0_cs0_bnap_value = EBC0_BNAP_LARGE_FLASH_OR_SRAM;
 		ebc0_cs0_bncr_value = EBC0_BNCR_LARGE_FLASH_OR_SRAM_CS0;
-		if ((is_nand_selected()) == TRUE) {
+		if ((is_nand_selected()) == true) {
 			/* NAND Flash */
 			ebc0_cs1_bnap_value = EBC0_BNAP_NAND_FLASH;
 			ebc0_cs1_bncr_value = EBC0_BNCR_NAND_FLASH_CS1;
@@ -812,7 +812,7 @@ void ext_bus_cntlr_init(void)
 		ebc0_cs0_bnap_value = 0;
 		ebc0_cs0_bncr_value = 0;
 
-		if ((is_nand_selected()) == TRUE) {
+		if ((is_nand_selected()) == true) {
 			/* NAND Flash */
 			ebc0_cs1_bnap_value = EBC0_BNAP_NAND_FLASH;
 			ebc0_cs1_bncr_value = EBC0_BNCR_NAND_FLASH_CS1;
@@ -830,7 +830,7 @@ void ext_bus_cntlr_init(void)
 			ebc0_cs3_bncr_value = 0;
 		}
 
-		if ((config_on_ebc_cs4_is_small_flash()) == TRUE) {
+		if ((config_on_ebc_cs4_is_small_flash()) == true) {
 			/* Small Flash */
 			ebc0_cs4_bnap_value = EBC0_BNAP_SMALL_FLASH;
 			ebc0_cs4_bncr_value = EBC0_BNCR_SMALL_FLASH_CS4;

board/amcc/bamboo/bamboo.h

@@ -250,9 +250,6 @@
 #define	 PVR_POWERPC_440EP_PASS1    0x42221850
 #define	 PVR_POWERPC_440EP_PASS2    0x422218D3
 
-#define TRUE 1
-#define FALSE 0
-
 #define GPIO0		0
 #define GPIO1		1
 

board/amcc/yucca/yucca.c

@@ -47,9 +47,6 @@ void fpga_init (void);
 #define DEBUGF(fmt,args...)
 #endif
 
-#define FALSE	0
-#define TRUE	1
-
 int board_early_init_f (void)
 {
 /*----------------------------------------------------------------------------+

board/bf533-ezkit/flash-defines.h

@@ -32,8 +32,6 @@
 
 #define V_ULONG(a)		(*(volatile unsigned long *)( a ))
 #define V_BYTE(a)		(*(volatile unsigned char *)( a ))
-#define TRUE			0x1
-#define FALSE			0x0
 #define BUFFER_SIZE		0x80000
 #define NO_COMMAND		0
 #define GET_CODES		1

board/bf533-ezkit/flash.c

@@ -309,7 +309,7 @@ int read_flash(long nOffset, int *pnValue)
 	nValue = *(volatile unsigned short *)addr;
 	SSYNC();
 	*pnValue = nValue;
-	return TRUE;
+	return true;
 }
 
 int poll_toggle_bit(long lOffset)
@@ -398,7 +398,7 @@ int erase_block_flash(int nBlock, unsigned long address)
 	long ulSectorOff = 0x0;
 
 	if ((nBlock < 0) || (nBlock > AFP_NumSectors))
-		return FALSE;
+		return false;
 
 	ulSectorOff = (address - CONFIG_SYS_FLASH_BASE);
 

board/bf533-stamp/video.h

@@ -9,9 +9,6 @@
 #define YELLOW  (0xD292D210)	/* yellow pixel pattern  */
 #define WHITE   (0xFE80FE80)	/* white pixel pattern   */
 
-#define true	1
-#define false	0
-
 typedef struct {
 	unsigned int sav;
 	unsigned int eav;

board/cm_t35/cm_t35.c

@@ -91,6 +91,7 @@ static int splash_load_from_nand(u32 bmp_load_addr)
 
 	res = nand_read_skip_bad(&nand_info[nand_curr_device],
 			splash_screen_nand_offset, &bmp_header_size,
+			NULL, nand_info[nand_curr_device].size,
 			(u_char *)bmp_load_addr);
 	if (res < 0)
 		return res;
@@ -103,6 +104,7 @@ static int splash_load_from_nand(u32 bmp_load_addr)
 
 	return nand_read_skip_bad(&nand_info[nand_curr_device],
 			splash_screen_nand_offset, &bmp_size,
+			NULL, nand_info[nand_curr_device].size,
 			(u_char *)bmp_load_addr);
 
 splash_address_too_high:

board/cm_t35/display.c

@@ -381,14 +381,6 @@ static enum display_type env_parse_displaytype(char *displaytype)
 	return NONE;
 }
 
-int lcd_line_length;
-int lcd_color_fg;
-int lcd_color_bg;
-void *lcd_base;
-short console_col;
-short console_row;
-void *lcd_console_address;
-
 void lcd_ctrl_init(void *lcdbase)
 {
 	struct prcm *prcm = (struct prcm *)PRCM_BASE;

board/cogent/u-boot.lds.debug

@@ -132,6 +132,6 @@ SECTIONS
    *(.bss)
    *(COMMON)
   }
-  __bss_end__ = . ;
+  __bss_end = . ;
   PROVIDE (end = .);
 }

board/cray/L1/u-boot.lds.debug

@@ -132,6 +132,6 @@ SECTIONS
    *(.bss)
    *(COMMON)
   }
-  __bss_end__ = . ;
+  __bss_end = . ;
   PROVIDE (end = .);
 }

board/eltec/mhpc/u-boot.lds.debug

@@ -132,6 +132,6 @@ SECTIONS
    *(.bss)
    *(COMMON)
   }
-  __bss_end__ = . ;
+  __bss_end = . ;
   PROVIDE (end = .);
 }

board/emk/top860/u-boot.lds.debug

@@ -126,6 +126,6 @@ SECTIONS
    *(.bss)
    *(COMMON)
   }
-  __bss_end__ = . ;
+  __bss_end = . ;
   PROVIDE (end = .);
 }

board/esd/common/lcd.c

@@ -260,7 +260,7 @@ int lcd_init(uchar *lcd_reg, uchar *lcd_mem, S1D_REGS *regs, int reg_count,
 		/*
 		 * Big epson detected
 		 */
-		reg_byte_swap = FALSE;
+		reg_byte_swap = false;
 		palette_index = 0x1e2;
 		palette_value = 0x1e4;
 		lcd_depth = 16;
@@ -269,7 +269,7 @@ int lcd_init(uchar *lcd_reg, uchar *lcd_mem, S1D_REGS *regs, int reg_count,
 		/*
 		 * Big epson detected (with register swap bug)
 		 */
-		reg_byte_swap = TRUE;
+		reg_byte_swap = true;
 		palette_index = 0x1e3;
 		palette_value = 0x1e5;
 		lcd_depth = 16;
@@ -278,7 +278,7 @@ int lcd_init(uchar *lcd_reg, uchar *lcd_mem, S1D_REGS *regs, int reg_count,
 		/*
 		 * Small epson detected (704)
 		 */
-		reg_byte_swap = FALSE;
+		reg_byte_swap = false;
 		palette_index = 0x15;
 		palette_value = 0x17;
 		lcd_depth = 8;
@@ -287,7 +287,7 @@ int lcd_init(uchar *lcd_reg, uchar *lcd_mem, S1D_REGS *regs, int reg_count,
 		/*
 		 * Small epson detected (705)
 		 */
-		reg_byte_swap = FALSE;
+		reg_byte_swap = false;
 		palette_index = 0x15;
 		palette_value = 0x17;
 		lcd_depth = 8;
@@ -300,7 +300,7 @@ int lcd_init(uchar *lcd_reg, uchar *lcd_mem, S1D_REGS *regs, int reg_count,
 			/*
 			 * S1D13505 detected
 			 */
-			reg_byte_swap = TRUE;
+			reg_byte_swap = true;
 			palette_index = 0x25;
 			palette_value = 0x27;
 			lcd_depth = 16;

board/esd/common/lcd.h

@@ -35,11 +35,6 @@
 #define LOAD_LONG(data)   SWAP_LONG(data)
 #define LOAD_SHORT(data)  SWAP_SHORT(data)
 
-#ifndef FALSE
-#define FALSE 0
-#define TRUE (!FALSE)
-#endif
-
 #define S1D_WRITE_PALETTE(p,i,r,g,b)					\
 	{								\
 		out_8(&((uchar*)(p))[palette_index], (uchar)(i));	\

board/esd/cpci750/mpsc.c

@@ -967,7 +967,7 @@ static int galmpsc_set_snoop (int mpsc, int value)
 *       None.
 *
 * RETURN:
-*       True for success, false otherwise.
+*       true for success, false otherwise.
 *
 *******************************************************************************/
 

board/esd/cpci750/mv_eth.h

@@ -47,13 +47,6 @@
 **************************************************************************
 **************************************************************************
 *************************************************************************/
-#ifndef TRUE
-#define TRUE 1
-#endif
-#ifndef FALSE
-#define FALSE 0
-#endif
-
 /* In case not using SG on Tx, define MAX_SKB_FRAGS as 0 */
 #ifndef MAX_SKB_FRAGS
 #define MAX_SKB_FRAGS 0

board/esd/dasa_sim/cmd_dasa_sim.c

@@ -30,10 +30,6 @@
 #define OK 0
 #define ERROR (-1)
 
-#define TRUE 1
-#define FALSE 0
-
-
 extern u_long pci9054_iobase;
 
 
@@ -97,7 +93,7 @@ static int PciEepromWriteLongVPD (int offs, unsigned int value)
 		}
 	}
 
-	return TRUE;
+	return true;
 }
 
 

board/esd/pmc440/fpga.c

@@ -113,7 +113,7 @@ void fpga_serialslave_init(void)
 {
 	debug("%s:%d: Initialize serial slave interface\n", __FUNCTION__,
 	      __LINE__);
-	fpga_pgm_fn(FALSE, FALSE, 0);	/* make sure program pin is inactive */
+	fpga_pgm_fn(false, false, 0);	/* make sure program pin is inactive */
 }
 
 
@@ -188,7 +188,7 @@ int fpga_done_fn(int cookie)
 int fpga_pre_config_fn(int cookie)
 {
 	debug("%s:%d: FPGA pre-configuration\n", __FUNCTION__, __LINE__);
-	fpga_reset(TRUE);
+	fpga_reset(true);
 
 	/* release init# */
 	out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) | GPIO0_FPGA_FORCEINIT);
@@ -213,9 +213,9 @@ int fpga_post_config_fn(int cookie)
 	/* enable PLD0..7 pins */
 	out_be32((void*)GPIO1_OR, in_be32((void*)GPIO1_OR) & ~GPIO1_IOEN_N);
 
-	fpga_reset(TRUE);
+	fpga_reset(true);
 	udelay (100);
-	fpga_reset(FALSE);
+	fpga_reset(false);
 	udelay (100);
 
 	FPGA_OUT32(&fpga->status, (gd->board_type << STATUS_HWREV_SHIFT) & STATUS_HWREV_MASK);
@@ -296,7 +296,7 @@ void ngcc_fpga_serialslave_init(void)
 	      __FUNCTION__, __LINE__);
 
 	/* make sure program pin is inactive */
-	ngcc_fpga_pgm_fn (FALSE, FALSE, 0);
+	ngcc_fpga_pgm_fn(false, false, 0);
 }
 
 /*
@@ -382,10 +382,10 @@ int ngcc_fpga_pre_config_fn(int cookie)
 	pmc440_fpga_t *fpga = (pmc440_fpga_t *)FPGA_BA;
 	debug("%s:%d: FPGA pre-configuration\n", __FUNCTION__, __LINE__);
 
-	ngcc_fpga_reset(TRUE);
+	ngcc_fpga_reset(true);
 	FPGA_CLRBITS(&fpga->ctrla, 0xfffffe00);
 
-	ngcc_fpga_reset(TRUE);
+	ngcc_fpga_reset(true);
 	return 0;
 }
 
@@ -401,7 +401,7 @@ int ngcc_fpga_post_config_fn(int cookie)
 	debug("%s:%d: NGCC FPGA post configuration\n", __FUNCTION__, __LINE__);
 
 	udelay (100);
-	ngcc_fpga_reset(FALSE);
+	ngcc_fpga_reset(false);
 
 	FPGA_SETBITS(&fpga->ctrla, 0x29f8c000);
 

board/evb64260/eth_addrtbl.c

@@ -6,9 +6,6 @@
 #include "eth.h"
 #include "eth_addrtbl.h"
 
-#define TRUE 1
-#define FALSE 0
-
 #define PRINTF printf
 
 #ifdef CONFIG_GT_USE_MAC_HASH_TABLE
@@ -160,8 +157,8 @@ u32 hashTableFunction (u32 macH, u32 macL, u32 HashSize, u32 hash_mode)
  * rd   - the RD field in the address table.
  * Outputs
  * address table entry is added.
- * TRUE if success.
- * FALSE if table full
+ * true if success.
+ * false if table full
  */
 int addAddressTableEntry (u32 port, u32 macH, u32 macL, u32 rd, u32 skip)
 {
@@ -206,7 +203,7 @@ int addAddressTableEntry (u32 port, u32 macH, u32 macL, u32 rd, u32 skip)
 
 	if (i == HOP_NUMBER) {
 		PRINTF ("addGT64260addressTableEntry: table section is full\n");
-		return (FALSE);
+		return false;
 	}
 
 	/*
@@ -215,7 +212,7 @@ int addAddressTableEntry (u32 port, u32 macH, u32 macL, u32 rd, u32 skip)
 	entry->hi = newHi;
 	entry->lo = newLo;
 	DCACHE_FLUSH_N_SYNC ((u32) entry, MAC_ENTRY_SIZE);
-	return (TRUE);
+	return true;
 }
 
 #endif /* CONFIG_GT_USE_MAC_HASH_TABLE */

board/flagadm/u-boot.lds.debug

@@ -132,6 +132,6 @@ SECTIONS
    *(.bss)
    *(COMMON)
   }
-  __bss_end__ = . ;
+  __bss_end = . ;
   PROVIDE (end = .);
 }

board/gen860t/fpga.c

@@ -182,7 +182,7 @@ void fpga_selectmap_init (void)
 {
 	PRINTF ("%s:%d: Initialize SelectMap interface\n", __FUNCTION__,
 		__LINE__);
-	fpga_pgm_fn (FALSE, FALSE, 0);	/* make sure program pin is inactive */
+	fpga_pgm_fn(false, false, 0);	/* make sure program pin is inactive */
 }
 
 
@@ -314,7 +314,7 @@ int fpga_abort_fn (int cookie)
 int fpga_pre_config_fn (int cookie)
 {
 	PRINTF ("%s:%d: FPGA pre-configuration\n", __FUNCTION__, __LINE__);
-	fpga_reset (TRUE);
+	fpga_reset(true);
 	return 0;
 }
 
@@ -328,9 +328,9 @@ int fpga_post_config_fn (int cookie)
 	int rc;
 
 	PRINTF ("%s:%d: FPGA post configuration\n", __FUNCTION__, __LINE__);
-	fpga_reset (TRUE);
+	fpga_reset(true);
 	udelay (1000);
-	fpga_reset (FALSE);
+	fpga_reset(false);
 	udelay (1000);
 
 	/*

board/genietv/u-boot.lds.debug

@@ -138,6 +138,6 @@ SECTIONS
   {
     common/env_embedded.o (.ppcenv)
   }
-  __bss_end__ = . ;
+  __bss_end = . ;
   PROVIDE (end = .);
 }

board/hermes/u-boot.lds.debug

@@ -132,6 +132,6 @@ SECTIONS
    *(.bss)
    *(COMMON)
   }
-  __bss_end__ = . ;
+  __bss_end = . ;
   PROVIDE (end = .);
 }

board/hymod/u-boot.lds.debug

@@ -132,6 +132,6 @@ SECTIONS
    *(.bss)
    *(COMMON)
   }
-  __bss_end__ = . ;
+  __bss_end = . ;
   PROVIDE (end = .);
 }

board/icu862/u-boot.lds.debug

@@ -133,6 +133,6 @@ SECTIONS
    *(.bss)
    *(COMMON)
   }
-  __bss_end__ = . ;
+  __bss_end = . ;
   PROVIDE (end = .);
 }

board/ip860/u-boot.lds.debug

@@ -133,6 +133,6 @@ SECTIONS
    *(.bss)
    *(COMMON)
   }
-  __bss_end__ = . ;
+  __bss_end = . ;
   PROVIDE (end = .);
 }

board/ivm/u-boot.lds.debug

@@ -133,6 +133,6 @@ SECTIONS
    *(.bss)
    *(COMMON)
   }
-  __bss_end__ = . ;
+  __bss_end = . ;
   PROVIDE (end = .);
 }

board/kup/kup4k/u-boot.lds.debug

@@ -132,6 +132,6 @@ SECTIONS
    *(.bss)
    *(COMMON)
   }
-  __bss_end__ = . ;
+  __bss_end = . ;
   PROVIDE (end = .);
 }

board/kup/kup4x/u-boot.lds.debug

@@ -132,6 +132,6 @@ SECTIONS
    *(.bss)
    *(COMMON)
   }
-  __bss_end__ = . ;
+  __bss_end = . ;
   PROVIDE (end = .);
 }

board/lwmon/u-boot.lds.debug

@@ -133,6 +133,6 @@ SECTIONS
    *(.bss)
    *(COMMON)
   }
-  __bss_end__ = . ;
+  __bss_end = . ;
   PROVIDE (end = .);
 }

board/matrix_vision/mvblx/mvblx.c

@@ -162,7 +162,7 @@ int board_eth_init(bd_t *bis)
 
 int overwrite_console(void)
 {
-	/* return TRUE if console should be overwritten */
+	/* return true if console should be overwritten */
 	return 0;
 }
 

board/mbx8xx/u-boot.lds.debug

@@ -133,6 +133,6 @@ SECTIONS
    *(.bss)
    *(COMMON)
   }
-  __bss_end__ = . ;
+  __bss_end = . ;
   PROVIDE (end = .);
 }

board/mcc200/lcd.c

@@ -68,32 +68,12 @@ vidinfo_t panel_info = {
 	LCD_WIDTH, LCD_HEIGHT, LCD_BPP
 };
 
-int lcd_line_length;
-
-int lcd_color_fg;
-int lcd_color_bg;
-
-/*
- * Frame buffer memory information
- */
-void *lcd_base;			/* Start of framebuffer memory  */
-void *lcd_console_address;	/* Start of console buffer      */
-
-short console_col = 0;
-short console_row = 0;
 
 /*
  *  The device we use to communicate with PSoC
  */
 int serial_inited = 0;
 
-/*
- * Exported functions
- */
-void lcd_initcolregs (void);
-void lcd_ctrl_init (void *lcdbase);
-void lcd_enable (void);
-
 /*
  *  Imported functions to support the PSoC protocol
  */
@@ -156,12 +136,12 @@ void lcd_enable (void)
 
 #if !defined(SWAPPED_LCD)
 	for (i=0; i<fb_size; i++) {
-		serial_putc_raw_dev (PSOC_PSC, ((char *)lcd_base)[i]);
+		serial_putc_raw_dev(PSOC_PSC, ((char *)gd->fb_base)[i]);
 	}
 #else
     {
 	int x, y, pwidth;
-	char *p = (char *)lcd_base;
+	char *p = (char *)gd->fb_base;
 
 	pwidth = ((panel_info.vl_col+7) >> 3);
 	for (y=0; y<panel_info.vl_row; y++) {

board/mousse/flash.c

@@ -450,7 +450,7 @@ STATUS flashWrite (flash_dev_t * dev, int pos, char *buf, int len)
 }
 
 /*
- * flashWritable returns TRUE if a range contains all F's.
+ * flashWritable returns true if a range contains all F's.
  */
 
 STATUS flashWritable (flash_dev_t * dev, int pos, int len)

board/mousse/u-boot.lds.ram

@@ -96,6 +96,6 @@ SECTIONS
     common/env_embedded.o (.ppcenv)
   } > ram
 
-  __bss_end__ = . ;
+  __bss_end = . ;
   PROVIDE (end = .);
 }

board/mousse/u-boot.lds.rom

@@ -123,6 +123,6 @@ SECTIONS
    *(COMMON)
   }
 
-  __bss_end__ = . ;
+  __bss_end = . ;
   PROVIDE (end = .);
 }

board/mpl/common/isa.c

@@ -41,13 +41,6 @@
 #define PRINTF(fmt,args...)
 #endif
 
-#ifndef	TRUE
-#define TRUE            1
-#endif
-#ifndef FALSE
-#define FALSE           0
-#endif
-
 #if defined(CONFIG_PIP405)
 
 extern int drv_isa_kbd_init (void);
@@ -116,9 +109,9 @@ unsigned char open_cfg_super_IO(int address)
 	out8(CONFIG_SYS_ISA_IO_BASE_ADDRESS | address,0x55); /* open config */
 	out8(CONFIG_SYS_ISA_IO_BASE_ADDRESS | address,0x20); /* set address to DEV ID */
 	if(in8(CONFIG_SYS_ISA_IO_BASE_ADDRESS | address | 0x1)==0x40) /* ok Device ID is correct */
-		return TRUE;
+		return true;
 	else
-		return FALSE;
+		return false;
 }
 
 void close_cfg_super_IO(int address)
@@ -179,7 +172,7 @@ void isa_sio_loadtable(void)
 
 void isa_sio_setup(void)
 {
-	if(open_cfg_super_IO(SIO_CFG_PORT)==TRUE)
+	if (open_cfg_super_IO(SIO_CFG_PORT) == true)
 	{
 		isa_sio_loadtable();
 		close_cfg_super_IO(0x3F0);

board/mpl/mip405/mip405.c

@@ -77,8 +77,6 @@ DECLARE_GLOBAL_DATA_PTR;
 
 #undef SDRAM_DEBUG
 #define ENABLE_ECC /* for ecc boards */
-#define FALSE           0
-#define TRUE            1
 
 /* stdlib.h causes some compatibility problems; should fixe these! -- wd */
 #ifndef __ldiv_t_defined
@@ -771,7 +769,8 @@ int last_stage_init (void)
 
 int overwrite_console (void)
 {
-	return ((in8 (PLD_EXT_CONF_REG) & 0x1)==0);	/* return TRUE if console should be overwritten */
+	/* return true if console should be overwritten */
+	return ((in8(PLD_EXT_CONF_REG) & 0x1) == 0);
 }
 
 

board/mpl/pip405/pip405.c

@@ -36,9 +36,6 @@ DECLARE_GLOBAL_DATA_PTR;
 
 #undef SDRAM_DEBUG
 
-#define FALSE           0
-#define TRUE            1
-
 /* stdlib.h causes some compatibility problems; should fixe these! -- wd */
 #ifndef __ldiv_t_defined
 typedef struct {
@@ -700,7 +697,8 @@ int misc_init_r (void)
 
 int overwrite_console (void)
 {
-	return (in8 (CONFIG_PORT_ADDR) & 0x1);	/* return TRUE if console should be overwritten */
+	/* return true if console should be overwritten */
+	return in8(CONFIG_PORT_ADDR) & 0x1;
 }
 
 
@@ -945,7 +943,7 @@ void print_pip405_info (void)
 
 void user_led0 (unsigned char on)
 {
-	if (on == TRUE)
+	if (on == true)
 		out8 (PLD_LED_USER_REG, (in8 (PLD_LED_USER_REG) | 0x1));
 	else
 		out8 (PLD_LED_USER_REG, (in8 (PLD_LED_USER_REG) & 0xfe));
@@ -953,7 +951,7 @@ void user_led0 (unsigned char on)
 
 void user_led1 (unsigned char on)
 {
-	if (on == TRUE)
+	if (on == true)
 		out8 (PLD_LED_USER_REG, (in8 (PLD_LED_USER_REG) | 0x2));
 	else
 		out8 (PLD_LED_USER_REG, (in8 (PLD_LED_USER_REG) & 0xfd));

board/mpl/pip405/u-boot.lds.debug

@@ -132,6 +132,6 @@ SECTIONS
    *(.bss)
    *(COMMON)
   }
-  __bss_end__ = . ;
+  __bss_end = . ;
   PROVIDE (end = .);
 }

board/netphone/u-boot.lds.debug

@@ -132,6 +132,6 @@ SECTIONS
    *(.bss)
    *(COMMON)
   }
-  __bss_end__ = . ;
+  __bss_end = . ;
   PROVIDE (end = .);
 }

board/netta/u-boot.lds.debug

@@ -132,6 +132,6 @@ SECTIONS
    *(.bss)
    *(COMMON)
   }
-  __bss_end__ = . ;
+  __bss_end = . ;
   PROVIDE (end = .);
 }

board/netta2/u-boot.lds.debug

@@ -132,6 +132,6 @@ SECTIONS
    *(.bss)
    *(COMMON)
   }
-  __bss_end__ = . ;
+  __bss_end = . ;
   PROVIDE (end = .);
 }

board/netvia/u-boot.lds.debug

@@ -132,6 +132,6 @@ SECTIONS
    *(.bss)
    *(COMMON)
   }
-  __bss_end__ = . ;
+  __bss_end = . ;
   PROVIDE (end = .);
 }

board/nx823/u-boot.lds.debug

@@ -132,6 +132,6 @@ SECTIONS
    *(.bss)
    *(COMMON)
   }
-  __bss_end__ = . ;
+  __bss_end = . ;
   PROVIDE (end = .);
 }

board/prodrive/p3mx/mpsc.c

@@ -962,7 +962,7 @@ static int galmpsc_set_snoop (int mpsc, int value)
 *       None.
 *
 * RETURN:
-*       True for success, false otherwise.
+*       true for success, false otherwise.
 *
 *******************************************************************************/
 

board/prodrive/p3mx/mv_eth.h

@@ -47,13 +47,6 @@
 **************************************************************************
 **************************************************************************
 *************************************************************************/
-#ifndef TRUE
-#define TRUE 1
-#endif
-#ifndef FALSE
-#define FALSE 0
-#endif
-
 /* In case not using SG on Tx, define MAX_SKB_FRAGS as 0 */
 #ifndef MAX_SKB_FRAGS
 #define MAX_SKB_FRAGS 0

board/quantum/u-boot.lds.debug

@@ -125,6 +125,6 @@ SECTIONS
    *(.bss)
    *(COMMON)
   }
-  __bss_end__ = . ;
+  __bss_end = . ;
   PROVIDE (end = .);
 }

board/sacsng/clkinit.c

@@ -94,11 +94,11 @@ uint Daq_BRG_Get_Div16(uint brg)
 
      if (*brg_ptr & CPM_BRG_DIV16) {
 	 /* DIV16 active */
-	 return (TRUE);
+	 return true;
      }
      else {
 	 /* DIV16 inactive */
-	 return (FALSE);
+	 return false;
      }
 }
 

board/sacsng/clkinit.h

@@ -22,11 +22,6 @@
  * MA 02111-1307 USA
  */
 
-#ifndef FALSE
-#define FALSE 0
-#define TRUE (!FALSE)
-#endif
-
 #define SLRCLK_EN_MASK  0x00040000 /* PA13 - SLRCLK_EN*     */
 
 #define MIN_SAMPLE_RATE       4000 /* Minimum sample rate */

board/sandburst/karef/u-boot.lds.debug

@@ -141,6 +141,6 @@ SECTIONS
    *(.bss)
    *(COMMON)
   }
-  __bss_end__ = . ;
+  __bss_end = . ;
   PROVIDE (end = .);
 }

board/sandburst/metrobox/u-boot.lds.debug

@@ -141,6 +141,6 @@ SECTIONS
    *(.bss)
    *(COMMON)
   }
-  __bss_end__ = . ;
+  __bss_end = . ;
   PROVIDE (end = .);
 }

board/spd8xx/u-boot.lds.debug

@@ -133,6 +133,6 @@ SECTIONS
    *(.bss)
    *(COMMON)
   }
-  __bss_end__ = . ;
+  __bss_end = . ;
   PROVIDE (end = .);
 }

board/spear/x600/fpga.c

@@ -113,7 +113,7 @@ static int fpga_done_fn(int cookie)
 static int fpga_pre_config_fn(int cookie)
 {
 	debug("%s:%d: FPGA pre-configuration\n", __func__, __LINE__);
-	fpga_reset(TRUE);
+	fpga_reset(true);
 
 	return 0;
 }
@@ -128,9 +128,9 @@ static int fpga_post_config_fn(int cookie)
 
 	debug("%s:%d: FPGA post configuration\n", __func__, __LINE__);
 
-	fpga_reset(TRUE);
+	fpga_reset(true);
 	udelay(100);
-	fpga_reset(FALSE);
+	fpga_reset(false);
 	udelay(100);
 
 	return rc;
@@ -200,7 +200,7 @@ static Xilinx_desc fpga[CONFIG_FPGA_COUNT] = {
 static void fpga_serialslave_init(void)
 {
 	debug("%s:%d: Initialize serial slave interface\n", __func__, __LINE__);
-	fpga_pgm_fn(FALSE, FALSE, 0);	/* make sure program pin is inactive */
+	fpga_pgm_fn(false, false, 0);	/* make sure program pin is inactive */
 }
 
 static int expi_setup(int freq)

board/stx/stxxtc/u-boot.lds.debug

@@ -132,6 +132,6 @@ SECTIONS
    *(.bss)
    *(COMMON)
   }
-  __bss_end__ = . ;
+  __bss_end = . ;
   PROVIDE (end = .);
 }

board/svm_sc8xx/u-boot.lds.debug

@@ -125,6 +125,6 @@ SECTIONS
    *(.bss)
    *(COMMON)
   }
-  __bss_end__ = . ;
+  __bss_end = . ;
   PROVIDE (end = .);
 }

board/teejet/mt_ventoux/mt_ventoux.c

@@ -179,9 +179,9 @@ int fpga_post_config_fn(int cookie)
 {
 	debug("%s:%d: FPGA post-configuration\n", __func__, __LINE__);
 
-	fpga_reset(TRUE);
+	fpga_reset(true);
 	udelay(100);
-	fpga_reset(FALSE);
+	fpga_reset(false);
 
 	return 0;
 }

board/w7o/u-boot.lds.debug

@@ -132,6 +132,6 @@ SECTIONS
    *(.bss)
    *(COMMON)
   }
-  __bss_end__ = . ;
+  __bss_end = . ;
   PROVIDE (end = .);
 }

board/xes/xpedite1000/u-boot.lds.debug

@@ -137,6 +137,6 @@ SECTIONS
    *(.bss)
    *(COMMON)
   }
-  __bss_end__ = . ;
+  __bss_end = . ;
   PROVIDE (end = .);
 }

common/Makefile

@@ -66,6 +66,7 @@ COBJS-$(CONFIG_ENV_IS_IN_NVRAM) += env_nvram.o
 COBJS-$(CONFIG_ENV_IS_IN_ONENAND) += env_onenand.o
 COBJS-$(CONFIG_ENV_IS_IN_SPI_FLASH) += env_sf.o
 COBJS-$(CONFIG_ENV_IS_IN_REMOTE) += env_remote.o
+COBJS-$(CONFIG_ENV_IS_IN_UBI) += env_ubi.o
 COBJS-$(CONFIG_ENV_IS_NOWHERE) += env_nowhere.o
 
 # command
@@ -75,6 +76,7 @@ COBJS-$(CONFIG_CMD_SOURCE) += cmd_source.o
 COBJS-$(CONFIG_CMD_BDI) += cmd_bdinfo.o
 COBJS-$(CONFIG_CMD_BEDBUG) += bedbug.o cmd_bedbug.o
 COBJS-$(CONFIG_CMD_BMP) += cmd_bmp.o
+COBJS-$(CONFIG_CMD_BOOTMENU) += cmd_bootmenu.o
 COBJS-$(CONFIG_CMD_BOOTLDR) += cmd_bootldr.o
 COBJS-$(CONFIG_CMD_BOOTSTAGE) += cmd_bootstage.o
 COBJS-$(CONFIG_CMD_CACHE) += cmd_cache.o

common/bedbug.c

@@ -72,7 +72,7 @@ int downstring __P ((char *));
  *			F_INSTR		- output raw instruction.
  *			F_LINENO	- show line # info if available.
  *
- * Returns TRUE if the area was successfully disassembled or FALSE if
+ * Returns true if the area was successfully disassembled or false if
  * a problem was encountered with accessing the memory.
  */
 
@@ -137,8 +137,8 @@ int disppc (unsigned char *memaddr, unsigned char *virtual, int num_instr,
 	for (i = 0; i < num_instr; ++i, memaddr += 4, ctx.virtual += 4) {
 #ifdef USE_SOURCE_CODE
 		if (ctx.flags & F_LINENO) {
-			if ((line_info_from_addr ((Elf32_Word) ctx.virtual, filename,
-									  funcname, &line_no) == TRUE) &&
+			if ((line_info_from_addr ((Elf32_Word) ctx.virtual,
+				filename, funcname, &line_no) == true) &&
 				((line_no != last_line_no) ||
 				 (strcmp (last_funcname, funcname) != 0))) {
 				print_source_line (filename, funcname, line_no, pfunc);
@@ -154,15 +154,15 @@ int disppc (unsigned char *memaddr, unsigned char *virtual, int num_instr,
 #ifdef USE_SOURCE_CODE
 		if (ctx.flags & F_SYMBOL) {
 			if ((symname =
-				 symbol_name_from_addr ((Elf32_Word) ctx.virtual,
-										TRUE, 0)) != 0) {
+				 symbol_name_from_addr((Elf32_Word) ctx.virtual,
+						true, 0)) != 0) {
 				cursym = symname;
 				symoffset = 0;
 			} else {
 				if ((cursym == 0) &&
 					((symname =
-					  symbol_name_from_addr ((Elf32_Word) ctx.virtual,
-											 FALSE, &symoffset)) != 0)) {
+					  symbol_name_from_addr((Elf32_Word) ctx.virtual,
+						false, &symoffset)) != 0)) {
 					cursym = symname;
 				} else {
 					symoffset += 4;
@@ -205,7 +205,8 @@ int disppc (unsigned char *memaddr, unsigned char *virtual, int num_instr,
 		}
 
 		if (((ctx.flags & F_SIMPLE) == 0) ||
-			(ctx.op->hfunc == 0) || ((*ctx.op->hfunc) (&ctx) == FALSE)) {
+			(ctx.op->hfunc == 0) ||
+			((*ctx.op->hfunc) (&ctx) == false)) {
 			sprintf (&ctx.data[ctx.datalen], "%-7s ", ctx.op->name);
 			ctx.datalen += 8;
 			print_operands (&ctx);
@@ -214,7 +215,7 @@ int disppc (unsigned char *memaddr, unsigned char *virtual, int num_instr,
 		(*pfunc) (ctx.data);
 	}
 
-	return TRUE;
+	return true;
 }								/* disppc */
 
 
@@ -364,10 +365,10 @@ int print_operands (struct ppc_ctx *ctx)
  *	value		The address of an unsigned long to be filled in
  *			with the value of the operand if it is found.  This
  *			will only be filled in if the function returns
- *			TRUE.  This may be passed as 0 if the value is
+ *			true.  This may be passed as 0 if the value is
  *			not required.
  *
- * Returns TRUE if the operand was found or FALSE if it was not.
+ * Returns true if the operand was found or false if it was not.
  */
 
 int get_operand_value (struct opcode *op, unsigned long instr,
@@ -379,7 +380,7 @@ int get_operand_value (struct opcode *op, unsigned long instr,
   /*------------------------------------------------------------*/
 
 	if (field > n_operands) {
-		return FALSE;			/* bad operand ?! */
+		return false;			/* bad operand ?! */
 	}
 
 	/* Walk through the operands and list each in order */
@@ -393,10 +394,10 @@ int get_operand_value (struct opcode *op, unsigned long instr,
 		if (value) {
 			*value = (instr >> opr->shift) & ((1 << opr->bits) - 1);
 		}
-		return TRUE;
+		return true;
 	}
 
-	return FALSE;
+	return false;
 }								/* operand_value */
 
 
@@ -649,7 +650,7 @@ int tbr_value (char *name)
  * Arguments:
  *	ctx		A pointer to the disassembler context record.
  *
- * Returns TRUE if the simpler form was printed or FALSE if it was not.
+ * Returns true if the simpler form was printed or false if it was not.
  */
 
 int handle_bc (struct ppc_ctx *ctx)
@@ -669,33 +670,33 @@ int handle_bc (struct ppc_ctx *ctx)
 
   /*------------------------------------------------------------*/
 
-	if (get_operand_value (ctx->op, ctx->instr, O_BO, &bo) == FALSE)
-		return FALSE;
+	if (get_operand_value(ctx->op, ctx->instr, O_BO, &bo) == false)
+		return false;
 
-	if (get_operand_value (ctx->op, ctx->instr, O_BI, &bi) == FALSE)
-		return FALSE;
+	if (get_operand_value(ctx->op, ctx->instr, O_BI, &bi) == false)
+		return false;
 
 	if ((bo == 12) && (bi == 0)) {
 		ctx->op = &blt;
 		sprintf (&ctx->data[ctx->datalen], "%-7s ", ctx->op->name);
 		ctx->datalen += 8;
 		print_operands (ctx);
-		return TRUE;
+		return true;
 	} else if ((bo == 4) && (bi == 10)) {
 		ctx->op = &bne;
 		sprintf (&ctx->data[ctx->datalen], "%-7s ", ctx->op->name);
 		ctx->datalen += 8;
 		print_operands (ctx);
-		return TRUE;
+		return true;
 	} else if ((bo == 16) && (bi == 0)) {
 		ctx->op = &bdnz;
 		sprintf (&ctx->data[ctx->datalen], "%-7s ", ctx->op->name);
 		ctx->datalen += 8;
 		print_operands (ctx);
-		return TRUE;
+		return true;
 	}
 
-	return FALSE;
+	return false;
 }								/* handle_blt */
 
 
@@ -719,7 +720,7 @@ int handle_bc (struct ppc_ctx *ctx)
  *	pfunc		The address of a function to call to print the output.
  *
  *
- * Returns TRUE if it was able to output the line info, or false if it was
+ * Returns true if it was able to output the line info, or false if it was
  * not.
  */
 
@@ -734,7 +735,7 @@ int print_source_line (char *filename, char *funcname,
 	sprintf (out_buf, "%s %s(): line %d", filename, funcname, line_no);
 	(*pfunc) (out_buf);
 
-	return TRUE;
+	return true;
 }								/* print_source_line */
 
 
@@ -1039,14 +1040,14 @@ int downstring (char *s)
  * Arguments:
  *	nextaddr	The address (to be filled in) of the next
  *			instruction to execute.  This will only be a valid
- *			address if TRUE is returned.
+ *			address if true is returned.
  *
  *	step_over	A flag indicating how to compute addresses for
  *			branch statements:
- *			 TRUE  = Step over the branch (next)
- *			 FALSE = step into the branch (step)
+ *			 true  = Step over the branch (next)
+ *			 false = step into the branch (step)
  *
- * Returns TRUE if it was able to compute the address.  Returns FALSE if
+ * Returns true if it was able to compute the address.  Returns false if
  * it has a problem reading the current instruction or one of the registers.
  */
 
@@ -1075,7 +1076,7 @@ int find_next_address (unsigned char *nextaddr, int step_over,
 
 	if (nextaddr == 0 || regs == 0) {
 		printf ("find_next_address: bad args");
-		return FALSE;
+		return false;
 	}
 
 	pc = regs->nip & 0xfffffffc;
@@ -1083,7 +1084,7 @@ int find_next_address (unsigned char *nextaddr, int step_over,
 
 	if ((op = find_opcode (instr)) == (struct opcode *) 0) {
 		printf ("find_next_address: can't parse opcode 0x%lx", instr);
-		return FALSE;
+		return false;
 	}
 
 	ctr = regs->ctr;
@@ -1100,7 +1101,7 @@ int find_next_address (unsigned char *nextaddr, int step_over,
 			!get_operand_value (op, instr, O_BI, &bi) ||
 			!get_operand_value (op, instr, O_AA, &aa) ||
 			!get_operand_value (op, instr, O_LK, &lk))
-			return FALSE;
+			return false;
 
 		if ((addr & (1 << 13)) != 0)
 			addr = addr - (1 << 14);
@@ -1116,7 +1117,7 @@ int find_next_address (unsigned char *nextaddr, int step_over,
 		if (!get_operand_value (op, instr, O_LI, &addr) ||
 			!get_operand_value (op, instr, O_AA, &aa) ||
 			!get_operand_value (op, instr, O_LK, &lk))
-			return FALSE;
+			return false;
 
 		if ((addr & (1 << 23)) != 0)
 			addr = addr - (1 << 24);
@@ -1130,7 +1131,7 @@ int find_next_address (unsigned char *nextaddr, int step_over,
 		if (!get_operand_value (op, instr, O_BO, &bo) ||
 			!get_operand_value (op, instr, O_BI, &bi) ||
 			!get_operand_value (op, instr, O_LK, &lk))
-			return FALSE;
+			return false;
 
 		addr = ctr;
 		aa = 1;
@@ -1143,7 +1144,7 @@ int find_next_address (unsigned char *nextaddr, int step_over,
 		if (!get_operand_value (op, instr, O_BO, &bo) ||
 			!get_operand_value (op, instr, O_BI, &bi) ||
 			!get_operand_value (op, instr, O_LK, &lk))
-			return FALSE;
+			return false;
 
 		addr = lr;
 		aa = 1;
@@ -1227,12 +1228,12 @@ int find_next_address (unsigned char *nextaddr, int step_over,
 		step = next = pc + 4;
 	}
 
-	if (step_over == TRUE)
+	if (step_over == true)
 		*(unsigned long *) nextaddr = next;
 	else
 		*(unsigned long *) nextaddr = step;
 
-	return TRUE;
+	return true;
 }								/* find_next_address */
 
 

common/board_f.c

@@ -788,9 +788,6 @@ static init_fnc_t init_sequence_f[] = {
 	/* TODO: can we rename this to timer_init()? */
 	init_timebase,
 #endif
-#if defined(CONFIG_BOARD_EARLY_INIT_F)
-	board_early_init_f,
-#endif
 #ifdef CONFIG_ARM
 	timer_init,		/* initialize timer */
 #endif

common/cmd_bedbug.c

@@ -292,7 +292,7 @@ int do_bedbug_step (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
 		return 1;
 	}
 
-	if (!find_next_address ((unsigned char *) &addr, FALSE, bug_ctx.regs))
+	if (!find_next_address((unsigned char *) &addr, false, bug_ctx.regs))
 		return 1;
 
 	if (bug_ctx.set)
@@ -323,7 +323,7 @@ int do_bedbug_next (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
 		return 1;
 	}
 
-	if (!find_next_address ((unsigned char *) &addr, TRUE, bug_ctx.regs))
+	if (!find_next_address((unsigned char *) &addr, true, bug_ctx.regs))
 		return 1;
 
 	if (bug_ctx.set)

common/cmd_bootmenu.c

@@ -0,0 +1,517 @@
+/*
+ * (C) Copyright 2011-2013 Pali Rohár <pali.rohar@gmail.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <ansi.h>
+#include <menu.h>
+#include <hush.h>
+#include <watchdog.h>
+#include <malloc.h>
+#include <linux/string.h>
+
+/* maximum bootmenu entries */
+#define MAX_COUNT	99
+
+/* maximal size of bootmenu env
+ *  9 = strlen("bootmenu_")
+ *  2 = strlen(MAX_COUNT)
+ *  1 = NULL term
+ */
+#define MAX_ENV_SIZE	(9 + 2 + 1)
+
+struct bootmenu_entry {
+	unsigned short int num;		/* unique number 0 .. MAX_COUNT */
+	char key[3];			/* key identifier of number */
+	char *title;			/* title of entry */
+	char *command;			/* hush command of entry */
+	struct bootmenu_data *menu;	/* this bootmenu */
+	struct bootmenu_entry *next;	/* next menu entry (num+1) */
+};
+
+struct bootmenu_data {
+	int delay;			/* delay for autoboot */
+	int active;			/* active menu entry */
+	int count;			/* total count of menu entries */
+	struct bootmenu_entry *first;	/* first menu entry */
+};
+
+enum bootmenu_key {
+	KEY_NONE = 0,
+	KEY_UP,
+	KEY_DOWN,
+	KEY_SELECT,
+};
+
+static char *bootmenu_getoption(unsigned short int n)
+{
+	char name[MAX_ENV_SIZE] = "bootmenu_";
+
+	if (n > MAX_COUNT)
+		return NULL;
+
+	sprintf(name + 9, "%d", n);
+	return getenv(name);
+}
+
+static void bootmenu_print_entry(void *data)
+{
+	struct bootmenu_entry *entry = data;
+	int reverse = (entry->menu->active == entry->num);
+
+	/*
+	 * Move cursor to line where the entry will be drown (entry->num)
+	 * First 3 lines contain bootmenu header + 1 empty line
+	 */
+	printf(ANSI_CURSOR_POSITION, entry->num + 4, 1);
+
+	puts("     ");
+
+	if (reverse)
+		puts(ANSI_COLOR_REVERSE);
+
+	puts(entry->title);
+
+	if (reverse)
+		puts(ANSI_COLOR_RESET);
+}
+
+static void bootmenu_autoboot_loop(struct bootmenu_data *menu,
+				enum bootmenu_key *key, int *esc)
+{
+	int i, c;
+
+	if (menu->delay > 0) {
+		printf(ANSI_CURSOR_POSITION, menu->count + 5, 1);
+		printf("  Hit any key to stop autoboot: %2d ", menu->delay);
+	}
+
+	while (menu->delay > 0) {
+		for (i = 0; i < 100; ++i) {
+			if (!tstc()) {
+				WATCHDOG_RESET();
+				mdelay(10);
+				continue;
+			}
+
+			menu->delay = -1;
+			c = getc();
+
+			switch (c) {
+			case '\e':
+				*esc = 1;
+				*key = KEY_NONE;
+				break;
+			case '\r':
+				*key = KEY_SELECT;
+				break;
+			default:
+				*key = KEY_NONE;
+				break;
+			}
+
+			break;
+		}
+
+		if (menu->delay < 0)
+			break;
+
+		--menu->delay;
+		printf("\b\b\b%2d ", menu->delay);
+	}
+
+	printf(ANSI_CURSOR_POSITION, menu->count + 5, 1);
+	puts(ANSI_CLEAR_LINE);
+
+	if (menu->delay == 0)
+		*key = KEY_SELECT;
+}
+
+static void bootmenu_loop(struct bootmenu_data *menu,
+		enum bootmenu_key *key, int *esc)
+{
+	int c;
+
+	while (!tstc()) {
+		WATCHDOG_RESET();
+		mdelay(10);
+	}
+
+	c = getc();
+
+	switch (*esc) {
+	case 0:
+		/* First char of ANSI escape sequence '\e' */
+		if (c == '\e') {
+			*esc = 1;
+			*key = KEY_NONE;
+		}
+		break;
+	case 1:
+		/* Second char of ANSI '[' */
+		if (c == '[') {
+			*esc = 2;
+			*key = KEY_NONE;
+		} else {
+			*esc = 0;
+		}
+		break;
+	case 2:
+	case 3:
+		/* Third char of ANSI (number '1') - optional */
+		if (*esc == 2 && c == '1') {
+			*esc = 3;
+			*key = KEY_NONE;
+			break;
+		}
+
+		*esc = 0;
+
+		/* ANSI 'A' - key up was pressed */
+		if (c == 'A')
+			*key = KEY_UP;
+		/* ANSI 'B' - key down was pressed */
+		else if (c == 'B')
+			*key = KEY_DOWN;
+		/* other key was pressed */
+		else
+			*key = KEY_NONE;
+
+		break;
+	}
+
+	/* enter key was pressed */
+	if (c == '\r')
+		*key = KEY_SELECT;
+}
+
+static char *bootmenu_choice_entry(void *data)
+{
+	struct bootmenu_data *menu = data;
+	struct bootmenu_entry *iter;
+	enum bootmenu_key key = KEY_NONE;
+	int esc = 0;
+	int i;
+
+	while (1) {
+		if (menu->delay >= 0) {
+			/* Autoboot was not stopped */
+			bootmenu_autoboot_loop(menu, &key, &esc);
+		} else {
+			/* Some key was pressed, so autoboot was stopped */
+			bootmenu_loop(menu, &key, &esc);
+		}
+
+		switch (key) {
+		case KEY_UP:
+			if (menu->active > 0)
+				--menu->active;
+			/* no menu key selected, regenerate menu */
+			return NULL;
+		case KEY_DOWN:
+			if (menu->active < menu->count - 1)
+				++menu->active;
+			/* no menu key selected, regenerate menu */
+			return NULL;
+		case KEY_SELECT:
+			iter = menu->first;
+			for (i = 0; i < menu->active; ++i)
+				iter = iter->next;
+			return iter->key;
+		default:
+			break;
+		}
+	}
+
+	/* never happens */
+	debug("bootmenu: this should not happen");
+	return NULL;
+}
+
+static void bootmenu_destroy(struct bootmenu_data *menu)
+{
+	struct bootmenu_entry *iter = menu->first;
+	struct bootmenu_entry *next;
+
+	while (iter) {
+		next = iter->next;
+		free(iter->title);
+		free(iter->command);
+		free(iter);
+		iter = next;
+	}
+	free(menu);
+}
+
+static struct bootmenu_data *bootmenu_create(int delay)
+{
+	unsigned short int i = 0;
+	const char *option;
+	struct bootmenu_data *menu;
+	struct bootmenu_entry *iter = NULL;
+
+	int len;
+	char *sep;
+	struct bootmenu_entry *entry;
+
+	menu = malloc(sizeof(struct bootmenu_data));
+	if (!menu)
+		return NULL;
+
+	menu->delay = delay;
+	menu->active = 0;
+	menu->first = NULL;
+
+	while ((option = bootmenu_getoption(i))) {
+		sep = strchr(option, '=');
+		if (!sep) {
+			printf("Invalid bootmenu entry: %s\n", option);
+			break;
+		}
+
+		entry = malloc(sizeof(struct bootmenu_entry));
+		if (!entry)
+			goto cleanup;
+
+		len = sep-option;
+		entry->title = malloc(len + 1);
+		if (!entry->title) {
+			free(entry);
+			goto cleanup;
+		}
+		memcpy(entry->title, option, len);
+		entry->title[len] = 0;
+
+		len = strlen(sep + 1);
+		entry->command = malloc(len + 1);
+		if (!entry->command) {
+			free(entry->title);
+			free(entry);
+			goto cleanup;
+		}
+		memcpy(entry->command, sep + 1, len);
+		entry->command[len] = 0;
+
+		sprintf(entry->key, "%d", i);
+
+		entry->num = i;
+		entry->menu = menu;
+		entry->next = NULL;
+
+		if (!iter)
+			menu->first = entry;
+		else
+			iter->next = entry;
+
+		iter = entry;
+		++i;
+
+		if (i == MAX_COUNT - 1)
+			break;
+	}
+
+	/* Add U-Boot console entry at the end */
+	if (i <= MAX_COUNT - 1) {
+		entry = malloc(sizeof(struct bootmenu_entry));
+		if (!entry)
+			goto cleanup;
+
+		entry->title = strdup("U-Boot console");
+		if (!entry->title) {
+			free(entry);
+			goto cleanup;
+		}
+
+		entry->command = strdup("");
+		if (!entry->command) {
+			free(entry->title);
+			free(entry);
+			goto cleanup;
+		}
+
+		sprintf(entry->key, "%d", i);
+
+		entry->num = i;
+		entry->menu = menu;
+		entry->next = NULL;
+
+		if (!iter)
+			menu->first = entry;
+		else
+			iter->next = entry;
+
+		iter = entry;
+		++i;
+	}
+
+	menu->count = i;
+	return menu;
+
+cleanup:
+	bootmenu_destroy(menu);
+	return NULL;
+}
+
+static void bootmenu_show(int delay)
+{
+	int init = 0;
+	void *choice = NULL;
+	char *title = NULL;
+	char *command = NULL;
+	struct menu *menu;
+	struct bootmenu_data *bootmenu;
+	struct bootmenu_entry *iter;
+	char *option, *sep;
+
+	/* If delay is 0 do not create menu, just run first entry */
+	if (delay == 0) {
+		option = bootmenu_getoption(0);
+		if (!option) {
+			puts("bootmenu option 0 was not found\n");
+			return;
+		}
+		sep = strchr(option, '=');
+		if (!sep) {
+			puts("bootmenu option 0 is invalid\n");
+			return;
+		}
+		run_command(sep+1, 0);
+		return;
+	}
+
+	bootmenu = bootmenu_create(delay);
+	if (!bootmenu)
+		return;
+
+	menu = menu_create(NULL, bootmenu->delay, 1, bootmenu_print_entry,
+			   bootmenu_choice_entry, bootmenu);
+	if (!menu) {
+		bootmenu_destroy(bootmenu);
+		return;
+	}
+
+	for (iter = bootmenu->first; iter; iter = iter->next) {
+		if (!menu_item_add(menu, iter->key, iter))
+			goto cleanup;
+	}
+
+	/* Default menu entry is always first */
+	menu_default_set(menu, "0");
+
+	puts(ANSI_CURSOR_HIDE);
+	puts(ANSI_CLEAR_CONSOLE);
+	printf(ANSI_CURSOR_POSITION, 1, 1);
+
+	init = 1;
+
+	if (menu_get_choice(menu, &choice)) {
+		iter = choice;
+		title = strdup(iter->title);
+		command = strdup(iter->command);
+	}
+
+cleanup:
+	menu_destroy(menu);
+	bootmenu_destroy(bootmenu);
+
+	if (init) {
+		puts(ANSI_CURSOR_SHOW);
+		puts(ANSI_CLEAR_CONSOLE);
+		printf(ANSI_CURSOR_POSITION, 1, 1);
+	}
+
+	if (title && command) {
+		debug("Starting entry '%s'\n", title);
+		free(title);
+		run_command(command, 0);
+		free(command);
+	}
+
+#ifdef CONFIG_POSTBOOTMENU
+	run_command(CONFIG_POSTBOOTMENU, 0);
+#endif
+}
+
+void menu_display_statusline(struct menu *m)
+{
+	struct bootmenu_entry *entry;
+	struct bootmenu_data *menu;
+
+	if (menu_default_choice(m, (void *)&entry) < 0)
+		return;
+
+	menu = entry->menu;
+
+	printf(ANSI_CURSOR_POSITION, 1, 1);
+	puts(ANSI_CLEAR_LINE);
+	printf(ANSI_CURSOR_POSITION, 2, 1);
+	puts("  *** U-Boot Boot Menu ***");
+	puts(ANSI_CLEAR_LINE_TO_END);
+	printf(ANSI_CURSOR_POSITION, 3, 1);
+	puts(ANSI_CLEAR_LINE);
+
+	/* First 3 lines are bootmenu header + 2 empty lines between entries */
+	printf(ANSI_CURSOR_POSITION, menu->count + 5, 1);
+	puts(ANSI_CLEAR_LINE);
+	printf(ANSI_CURSOR_POSITION, menu->count + 6, 1);
+	puts("  Press UP/DOWN to move, ENTER to select");
+	puts(ANSI_CLEAR_LINE_TO_END);
+	printf(ANSI_CURSOR_POSITION, menu->count + 7, 1);
+	puts(ANSI_CLEAR_LINE);
+}
+
+#ifdef CONFIG_MENU_SHOW
+int menu_show(int bootdelay)
+{
+	bootmenu_show(bootdelay);
+	return -1; /* -1 - abort boot and run monitor code */
+}
+#endif
+
+int do_bootmenu(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
+{
+	char *delay_str = NULL;
+	int delay = 10;
+
+#if defined(CONFIG_BOOTDELAY) && (CONFIG_BOOTDELAY >= 0)
+	delay = CONFIG_BOOTDELAY;
+#endif
+
+	if (argc >= 2)
+		delay_str = argv[1];
+
+	if (!delay_str)
+		delay_str = getenv("bootmenu_delay");
+
+	if (delay_str)
+		delay = (int)simple_strtol(delay_str, NULL, 10);
+
+	bootmenu_show(delay);
+	return 0;
+}
+
+U_BOOT_CMD(
+	bootmenu, 2, 1, do_bootmenu,
+	"ANSI terminal bootmenu",
+	"[delay]\n"
+	"    - show ANSI terminal bootmenu with autoboot delay"
+);

common/cmd_fdc.c

@@ -39,13 +39,6 @@
 #define PRINTF(fmt,args...)
 #endif
 
-#ifndef	TRUE
-#define TRUE            1
-#endif
-#ifndef FALSE
-#define FALSE           0
-#endif
-
 /*#if defined(CONFIG_CMD_DATE) */
 /*#include <rtc.h> */
 /*#endif */
@@ -214,9 +207,9 @@ int wait_for_fdc_int(void)
 		timeout--;
 		udelay(10);
 		if(timeout==0) /* timeout occured */
-			return FALSE;
+			return false;
 	}
-	return TRUE;
+	return true;
 }
 
 /* reads a byte from the FIFO of the FDC and checks direction and RQM bit
@@ -244,7 +237,7 @@ int fdc_need_more_output(void)
 			c=(unsigned char)read_fdc_byte();
 			printf("Error: more output: %x\n",c);
 	}
-	return TRUE;
+	return true;
 }
 
 
@@ -260,10 +253,10 @@ int write_fdc_byte(unsigned char val)
 		udelay(10);
 		fdc_need_more_output();
 		if(timeout==0) /* timeout occured */
-			return FALSE;
+			return false;
 	}
 	write_fdc_reg(FDC_FIFO,val);
-	return TRUE;
+	return true;
 }
 
 /* sets up all FDC commands and issues it to the FDC. If
@@ -344,9 +337,9 @@ int fdc_issue_cmd(FDC_COMMAND_STRUCT *pCMD,FD_GEO_STRUCT *pFG)
 	}
 	for(i=0;i<pCMD->cmdlen;i++) {
 		/* PRINTF("write cmd%d = 0x%02X\n",i,pCMD->cmd[i]); */
-		if(write_fdc_byte(pCMD->cmd[i])==FALSE) {
+		if (write_fdc_byte(pCMD->cmd[i]) == false) {
 			PRINTF("Error: timeout while issue cmd%d\n",i);
-			return FALSE;
+			return false;
 		}
 	}
 	timeout=FDC_TIME_OUT;
@@ -355,12 +348,12 @@ int fdc_issue_cmd(FDC_COMMAND_STRUCT *pCMD,FD_GEO_STRUCT *pFG)
 			timeout--;
 			if(timeout==0) {
 				PRINTF(" timeout while reading result%d MSR=0x%02X\n",i,read_fdc_reg(FDC_MSR));
-				return FALSE;
+				return false;
 			}
 		}
 		pCMD->result[i]=(unsigned char)read_fdc_byte();
 	}
-	return TRUE;
+	return true;
 }
 
 /* selects the drive assigned in the cmd structur and
@@ -391,9 +384,10 @@ void stop_fdc_drive(FDC_COMMAND_STRUCT *pCMD)
 int fdc_recalibrate(FDC_COMMAND_STRUCT *pCMD,FD_GEO_STRUCT *pFG)
 {
 	pCMD->cmd[COMMAND]=FDC_CMD_RECALIBRATE;
-	if(fdc_issue_cmd(pCMD,pFG)==FALSE)
-		return FALSE;
-	while(wait_for_fdc_int()!=TRUE);
+	if (fdc_issue_cmd(pCMD, pFG) == false)
+		return false;
+	while (wait_for_fdc_int() != true);
+
 	pCMD->cmd[COMMAND]=FDC_CMD_SENSE_INT;
 	return(fdc_issue_cmd(pCMD,pFG));
 }
@@ -403,9 +397,10 @@ int fdc_recalibrate(FDC_COMMAND_STRUCT *pCMD,FD_GEO_STRUCT *pFG)
 int fdc_seek(FDC_COMMAND_STRUCT *pCMD,FD_GEO_STRUCT *pFG)
 {
 	pCMD->cmd[COMMAND]=FDC_CMD_SEEK;
-	if(fdc_issue_cmd(pCMD,pFG)==FALSE)
-		return FALSE;
-	while(wait_for_fdc_int()!=TRUE);
+	if (fdc_issue_cmd(pCMD, pFG) == false)
+		return false;
+	while (wait_for_fdc_int() != true);
+
 	pCMD->cmd[COMMAND]=FDC_CMD_SENSE_INT;
 	return(fdc_issue_cmd(pCMD,pFG));
 }
@@ -421,7 +416,7 @@ int fdc_terminate(FDC_COMMAND_STRUCT *pCMD)
 	for(i=0;i<7;i++) {
 		pCMD->result[i]=(unsigned char)read_fdc_byte();
 	}
-	return TRUE;
+	return true;
 }
 
 /* reads data from FDC, seek commands are issued automatic */
@@ -440,18 +435,18 @@ int fdc_read_data(unsigned char *buffer, unsigned long blocks,FDC_COMMAND_STRUCT
 	retriesrw=0;
 	retriescal=0;
 	offset=0;
-	if(fdc_seek(pCMD,pFG)==FALSE) {
+	if (fdc_seek(pCMD, pFG) == false) {
 		stop_fdc_drive(pCMD);
 		if (flags)
 			enable_interrupts();
-		return FALSE;
+		return false;
 	}
 	if((pCMD->result[STATUS_0]&0x20)!=0x20) {
 		printf("Seek error Status: %02X\n",pCMD->result[STATUS_0]);
 		stop_fdc_drive(pCMD);
 		if (flags)
 			enable_interrupts();
-		return FALSE;
+		return false;
 	}
 	/* now determine the next seek point */
 	/*	lastblk=pCMD->blnr + blocks; */
@@ -466,11 +461,11 @@ int fdc_read_data(unsigned char *buffer, unsigned long blocks,FDC_COMMAND_STRUCT
 retryrw:
 		len=sect_size * readblk;
 		pCMD->cmd[COMMAND]=FDC_CMD_READ;
-		if(fdc_issue_cmd(pCMD,pFG)==FALSE) {
+		if (fdc_issue_cmd(pCMD, pFG) == false) {
 			stop_fdc_drive(pCMD);
 			if (flags)
 				enable_interrupts();
-			return FALSE;
+			return false;
 		}
 		for (i=0;i<len;i++) {
 			timeout=FDC_TIME_OUT;
@@ -492,15 +487,15 @@ retryrw:
 							stop_fdc_drive(pCMD);
 							if (flags)
 								enable_interrupts();
-							return FALSE;
+							return false;
 						}
 						else {
 							PRINTF(" trying to recalibrate Try %d\n",retriescal);
-							if(fdc_recalibrate(pCMD,pFG)==FALSE) {
+							if (fdc_recalibrate(pCMD, pFG) == false) {
 								stop_fdc_drive(pCMD);
 								if (flags)
 									enable_interrupts();
-								return FALSE;
+								return false;
 							}
 							retriesrw=0;
 							goto retrycal;
@@ -512,7 +507,7 @@ retryrw:
 					} /* else >FDC_RW_RETRIES */
 				}/* if output */
 				timeout--;
-			}while(TRUE);
+			} while (true);
 		} /* for len */
 		/* the last sector of a track or all data has been read,
 		 * we need to get the results */
@@ -530,22 +525,22 @@ retryrw:
 			readblk=blocks;
 retrycal:
 		/* a seek is necessary */
-		if(fdc_seek(pCMD,pFG)==FALSE) {
+		if (fdc_seek(pCMD, pFG) == false) {
 			stop_fdc_drive(pCMD);
 			if (flags)
 				enable_interrupts();
-			return FALSE;
+			return false;
 		}
 		if((pCMD->result[STATUS_0]&0x20)!=0x20) {
 			PRINTF("Seek error Status: %02X\n",pCMD->result[STATUS_0]);
 			stop_fdc_drive(pCMD);
-			return FALSE;
+			return false;
 		}
-	}while(TRUE); /* start over */
+	} while (true); /* start over */
 	stop_fdc_drive(pCMD); /* switch off drive */
 	if (flags)
 		enable_interrupts();
-	return TRUE;
+	return true;
 }
 
 /* Scan all drives and check if drive is present and disk is inserted */
@@ -559,20 +554,20 @@ int fdc_check_drive(FDC_COMMAND_STRUCT *pCMD, FD_GEO_STRUCT *pFG)
 		pCMD->drive=drives;
 		select_fdc_drive(pCMD);
 		pCMD->blnr=0; /* set to the 1st block */
-		if(fdc_recalibrate(pCMD,pFG)==FALSE)
+		if (fdc_recalibrate(pCMD, pFG) == false)
 			continue;
 		if((pCMD->result[STATUS_0]&0x10)==0x10)
 			continue;
 		/* ok drive connected check for disk */
 		state|=(1<<drives);
 		pCMD->blnr=pFG->size; /* set to the last block */
-		if(fdc_seek(pCMD,pFG)==FALSE)
+		if (fdc_seek(pCMD, pFG) == false)
 			continue;
 		pCMD->blnr=0; /* set to the 1st block */
-		if(fdc_recalibrate(pCMD,pFG)==FALSE)
+		if (fdc_recalibrate(pCMD, pFG) == false)
 			continue;
 		pCMD->cmd[COMMAND]=FDC_CMD_READ_ID;
-		if(fdc_issue_cmd(pCMD,pFG)==FALSE)
+		if (fdc_issue_cmd(pCMD, pFG) == false)
 			continue;
 		state|=(0x10<<drives);
 	}
@@ -584,7 +579,7 @@ int fdc_check_drive(FDC_COMMAND_STRUCT *pCMD, FD_GEO_STRUCT *pFG)
 			((state&(0x10<<i))==(0x10<<i)) ? pFG->name : "");
 	}
 	pCMD->flags=state;
-	return TRUE;
+	return true;
 }
 
 
@@ -611,9 +606,9 @@ int fdc_setup(int drive, FDC_COMMAND_STRUCT *pCMD, FD_GEO_STRUCT *pFG)
 	write_fdc_reg(FDC_CCR,pFG->rate);
 	/* then initialize the DSR */
 	write_fdc_reg(FDC_DSR,pFG->rate);
-	if(wait_for_fdc_int()==FALSE) {
+	if (wait_for_fdc_int() == false) {
 			PRINTF("Time Out after writing CCR\n");
-			return FALSE;
+			return false;
 	}
 	/* now issue sense Interrupt and status command
 	 * assuming only one drive present (drive 0) */
@@ -621,7 +616,7 @@ int fdc_setup(int drive, FDC_COMMAND_STRUCT *pCMD, FD_GEO_STRUCT *pFG)
 	for(i=0;i<4;i++) {
 		/* issue sense interrupt for all 4 possible drives */
 		pCMD->cmd[COMMAND]=FDC_CMD_SENSE_INT;
-		if(fdc_issue_cmd(pCMD,pFG)==FALSE) {
+		if (fdc_issue_cmd(pCMD, pFG) == false) {
 			PRINTF("Sense Interrupt for drive %d failed\n",i);
 		}
 	}
@@ -629,24 +624,24 @@ int fdc_setup(int drive, FDC_COMMAND_STRUCT *pCMD, FD_GEO_STRUCT *pFG)
 	pCMD->drive=drive;
 	select_fdc_drive(pCMD);
 	pCMD->cmd[COMMAND]=FDC_CMD_CONFIGURE;
-	if(fdc_issue_cmd(pCMD,pFG)==FALSE) {
+	if (fdc_issue_cmd(pCMD, pFG) == false) {
 		PRINTF(" configure timeout\n");
 		stop_fdc_drive(pCMD);
-		return FALSE;
+		return false;
 	}
 	/* issue specify command */
 	pCMD->cmd[COMMAND]=FDC_CMD_SPECIFY;
-	if(fdc_issue_cmd(pCMD,pFG)==FALSE) {
+	if (fdc_issue_cmd(pCMD, pFG) == false) {
 		PRINTF(" specify timeout\n");
 		stop_fdc_drive(pCMD);
-		return FALSE;
+		return false;
 
 	}
 	/* then, we clear the reset in the DOR */
 	/* fdc_check_drive(pCMD,pFG);	*/
 	/*	write_fdc_reg(FDC_DOR,0x04); */
 
-	return TRUE;
+	return true;
 }
 
 #if defined(CONFIG_CMD_FDOS)
@@ -664,30 +659,30 @@ int fdc_fdos_init (int drive)
 	FDC_COMMAND_STRUCT *pCMD = &cmd;
 
 	/* setup FDC and scan for drives  */
-	if(fdc_setup(drive,pCMD,pFG)==FALSE) {
+	if (fdc_setup(drive, pCMD, pFG) == false) {
 		printf("\n** Error in setup FDC **\n");
-		return FALSE;
+		return false;
 	}
-	if(fdc_check_drive(pCMD,pFG)==FALSE) {
+	if (fdc_check_drive(pCMD, pFG) == false) {
 		printf("\n** Error in check_drives **\n");
-		return FALSE;
+		return false;
 	}
 	if((pCMD->flags&(1<<drive))==0) {
 		/* drive not available */
 		printf("\n** Drive %d not available **\n",drive);
-		return FALSE;
+		return false;
 	}
 	if((pCMD->flags&(0x10<<drive))==0) {
 		/* no disk inserted */
 		printf("\n** No disk inserted in drive %d **\n",drive);
-		return FALSE;
+		return false;
 	}
 	/* ok, we have a valid source */
 	pCMD->drive=drive;
 
 	/* read first block */
 	pCMD->blnr=0;
-	return TRUE;
+	return true;
 }
 /**************************************************************************
 * int fdc_fdos_seek
@@ -747,11 +742,11 @@ int do_fdcboot (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 		return CMD_RET_USAGE;
 	}
 	/* setup FDC and scan for drives  */
-	if(fdc_setup(boot_drive,pCMD,pFG)==FALSE) {
+	if (fdc_setup(boot_drive, pCMD, pFG) == false) {
 		printf("\n** Error in setup FDC **\n");
 		return 1;
 	}
-	if(fdc_check_drive(pCMD,pFG)==FALSE) {
+	if (fdc_check_drive(pCMD, pFG) == false) {
 		printf("\n** Error in check_drives **\n");
 		return 1;
 	}
@@ -769,7 +764,7 @@ int do_fdcboot (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 	pCMD->drive=boot_drive;
 	/* read first block */
 	pCMD->blnr=0;
-	if(fdc_read_data((unsigned char *)addr,1,pCMD,pFG)==FALSE) {
+	if (fdc_read_data((unsigned char *)addr, 1, pCMD, pFG) == false) {
 		printf("\nRead error:");
 		for(i=0;i<7;i++)
 			printf("result%d: 0x%02X\n",i,pCMD->result[i]);
@@ -801,7 +796,7 @@ int do_fdcboot (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 		nrofblk++;
 	printf("Loading %ld Bytes (%d blocks) at 0x%08lx..\n",imsize,nrofblk,addr);
 	pCMD->blnr=0;
-	if(fdc_read_data((unsigned char *)addr,nrofblk,pCMD,pFG)==FALSE) {
+	if (fdc_read_data((unsigned char *)addr, nrofblk, pCMD, pFG) == false) {
 		/* read image block */
 		printf("\nRead error:");
 		for(i=0;i<7;i++)

common/cmd_mmc.c

@@ -164,8 +164,12 @@ static int do_mmcops(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 	}
 
 	if (strcmp(argv[1], "rescan") == 0) {
-		struct mmc *mmc = find_mmc_device(curr_device);
+		struct mmc *mmc;
 
+		if (argc != 2)
+			return CMD_RET_USAGE;
+
+		mmc = find_mmc_device(curr_device);
 		if (!mmc) {
 			printf("no mmc device at slot %x\n", curr_device);
 			return 1;
@@ -179,8 +183,12 @@ static int do_mmcops(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 			return 0;
 	} else if (strncmp(argv[1], "part", 4) == 0) {
 		block_dev_desc_t *mmc_dev;
-		struct mmc *mmc = find_mmc_device(curr_device);
+		struct mmc *mmc;
+
+		if (argc != 2)
+			return CMD_RET_USAGE;
 
+		mmc = find_mmc_device(curr_device);
 		if (!mmc) {
 			printf("no mmc device at slot %x\n", curr_device);
 			return 1;
@@ -196,6 +204,8 @@ static int do_mmcops(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 		puts("get mmc type error!\n");
 		return 1;
 	} else if (strcmp(argv[1], "list") == 0) {
+		if (argc != 2)
+			return CMD_RET_USAGE;
 		print_mmc_devices('\n');
 		return 0;
 	} else if (strcmp(argv[1], "dev") == 0) {

common/cmd_mtdparts.c

@@ -106,6 +106,8 @@
 #include <onenand_uboot.h>
 #endif
 
+DECLARE_GLOBAL_DATA_PTR;
+
 /* special size referring to all the remaining space in a partition */
 #define SIZE_REMAINING		0xFFFFFFFF
 
@@ -1537,6 +1539,7 @@ static int parse_mtdparts(const char *const mtdparts)
 	const char *p = mtdparts;
 	struct mtd_device *dev;
 	int err = 1;
+	char tmp_parts[MTDPARTS_MAXLEN];
 
 	debug("\n---parse_mtdparts---\nmtdparts = %s\n\n", p);
 
@@ -1547,7 +1550,12 @@ static int parse_mtdparts(const char *const mtdparts)
 	}
 
 	/* re-read 'mtdparts' variable, mtd_devices_init may be updating env */
-	p = getenv("mtdparts");
+	if (gd->flags & GD_FLG_ENV_READY) {
+		p = getenv("mtdparts");
+	} else {
+		p = tmp_parts;
+		getenv_f("mtdparts", tmp_parts, MTDPARTS_MAXLEN);
+	}
 
 	if (strncmp(p, "mtdparts=", 9) != 0) {
 		printf("mtdparts variable doesn't start with 'mtdparts='\n");
@@ -1705,6 +1713,7 @@ int mtdparts_init(void)
 	const char *current_partition;
 	int ids_changed;
 	char tmp_ep[PARTITION_MAXLEN];
+	char tmp_parts[MTDPARTS_MAXLEN];
 
 	debug("\n---mtdparts_init---\n");
 	if (!initialized) {
@@ -1718,7 +1727,17 @@ int mtdparts_init(void)
 
 	/* get variables */
 	ids = getenv("mtdids");
-	parts = getenv("mtdparts");
+	/*
+	 * The mtdparts variable tends to be long. If we need to access it
+	 * before the env is relocated, then we need to use our own stack
+	 * buffer.  gd->env_buf will be too small.
+	 */
+	if (gd->flags & GD_FLG_ENV_READY) {
+		parts = getenv("mtdparts");
+	} else {
+		parts = tmp_parts;
+		getenv_f("mtdparts", tmp_parts, MTDPARTS_MAXLEN);
+	}
 	current_partition = getenv("partition");
 
 	/* save it for later parsing, cannot rely on current partition pointer

common/cmd_nand.c

@@ -137,7 +137,8 @@ static inline int str2long(const char *p, ulong *num)
 	return *p != '\0' && *endptr == '\0';
 }
 
-static int get_part(const char *partname, int *idx, loff_t *off, loff_t *size)
+static int get_part(const char *partname, int *idx, loff_t *off, loff_t *size,
+		loff_t *maxsize)
 {
 #ifdef CONFIG_CMD_MTDPARTS
 	struct mtd_device *dev;
@@ -160,6 +161,7 @@ static int get_part(const char *partname, int *idx, loff_t *off, loff_t *size)
 
 	*off = part->offset;
 	*size = part->size;
+	*maxsize = part->size;
 	*idx = dev->id->num;
 
 	ret = set_dev(*idx);
@@ -173,10 +175,11 @@ static int get_part(const char *partname, int *idx, loff_t *off, loff_t *size)
 #endif
 }
 
-static int arg_off(const char *arg, int *idx, loff_t *off, loff_t *maxsize)
+static int arg_off(const char *arg, int *idx, loff_t *off, loff_t *size,
+		loff_t *maxsize)
 {
 	if (!str2off(arg, off))
-		return get_part(arg, idx, off, maxsize);
+		return get_part(arg, idx, off, size, maxsize);
 
 	if (*off >= nand_info[*idx].size) {
 		puts("Offset exceeds device limit\n");
@@ -184,36 +187,35 @@ static int arg_off(const char *arg, int *idx, loff_t *off, loff_t *maxsize)
 	}
 
 	*maxsize = nand_info[*idx].size - *off;
+	*size = *maxsize;
 	return 0;
 }
 
 static int arg_off_size(int argc, char *const argv[], int *idx,
-			loff_t *off, loff_t *size)
+			loff_t *off, loff_t *size, loff_t *maxsize)
 {
 	int ret;
-	loff_t maxsize = 0;
 
 	if (argc == 0) {
 		*off = 0;
 		*size = nand_info[*idx].size;
+		*maxsize = *size;
 		goto print;
 	}
 
-	ret = arg_off(argv[0], idx, off, &maxsize);
+	ret = arg_off(argv[0], idx, off, size, maxsize);
 	if (ret)
 		return ret;
 
-	if (argc == 1) {
-		*size = maxsize;
+	if (argc == 1)
 		goto print;
-	}
 
 	if (!str2off(argv[1], size)) {
 		printf("'%s' is not a number\n", argv[1]);
 		return -1;
 	}
 
-	if (*size > maxsize) {
+	if (*size > *maxsize) {
 		puts("Size exceeds partition or device limit\n");
 		return -1;
 	}
@@ -307,7 +309,8 @@ int do_nand_env_oob(cmd_tbl_t *cmdtp, int argc, char *const argv[])
 		if (argc < 3)
 			goto usage;
 
-		if (arg_off(argv[2], &idx, &addr, &maxsize)) {
+		/* We don't care about size, or maxsize. */
+		if (arg_off(argv[2], &idx, &addr, &maxsize, &maxsize)) {
 			puts("Offset or partition name expected\n");
 			return 1;
 		}
@@ -426,7 +429,7 @@ static int do_nand(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
 	int i, ret = 0;
 	ulong addr;
-	loff_t off, size;
+	loff_t off, size, maxsize;
 	char *cmd, *s;
 	nand_info_t *nand;
 #ifdef CONFIG_SYS_NAND_QUIET
@@ -551,7 +554,8 @@ static int do_nand(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 
 		printf("\nNAND %s: ", cmd);
 		/* skip first two or three arguments, look for offset and size */
-		if (arg_off_size(argc - o, argv + o, &dev, &off, &size) != 0)
+		if (arg_off_size(argc - o, argv + o, &dev, &off, &size,
+				 &maxsize) != 0)
 			return 1;
 
 		nand = &nand_info[dev];
@@ -619,7 +623,7 @@ static int do_nand(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 		if (s && !strcmp(s, ".raw")) {
 			raw = 1;
 
-			if (arg_off(argv[3], &dev, &off, &size))
+			if (arg_off(argv[3], &dev, &off, &size, &maxsize))
 				return 1;
 
 			if (argc > 4 && !str2long(argv[4], &pagecount)) {
@@ -635,7 +639,7 @@ static int do_nand(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 			rwsize = pagecount * (nand->writesize + nand->oobsize);
 		} else {
 			if (arg_off_size(argc - 3, argv + 3, &dev,
-						&off, &size) != 0)
+						&off, &size, &maxsize) != 0)
 				return 1;
 
 			rwsize = size;
@@ -645,9 +649,11 @@ static int do_nand(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 		    !strcmp(s, ".e") || !strcmp(s, ".i")) {
 			if (read)
 				ret = nand_read_skip_bad(nand, off, &rwsize,
+							 NULL, maxsize,
 							 (u_char *)addr);
 			else
 				ret = nand_write_skip_bad(nand, off, &rwsize,
+							  NULL, maxsize,
 							  (u_char *)addr, 0);
 #ifdef CONFIG_CMD_NAND_TRIMFFS
 		} else if (!strcmp(s, ".trimffs")) {
@@ -655,8 +661,8 @@ static int do_nand(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 				printf("Unknown nand command suffix '%s'\n", s);
 				return 1;
 			}
-			ret = nand_write_skip_bad(nand, off, &rwsize,
-						(u_char *)addr,
+			ret = nand_write_skip_bad(nand, off, &rwsize, NULL,
+						maxsize, (u_char *)addr,
 						WITH_DROP_FFS);
 #endif
 #ifdef CONFIG_CMD_NAND_YAFFS
@@ -665,9 +671,9 @@ static int do_nand(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 				printf("Unknown nand command suffix '%s'.\n", s);
 				return 1;
 			}
-			ret = nand_write_skip_bad(nand, off, &rwsize,
-						(u_char *)addr,
-						WITH_INLINE_OOB);
+			ret = nand_write_skip_bad(nand, off, &rwsize, NULL,
+						maxsize, (u_char *)addr,
+						WITH_YAFFS_OOB);
 #endif
 		} else if (!strcmp(s, ".oob")) {
 			/* out-of-band data */
@@ -775,7 +781,8 @@ static int do_nand(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 		if (s && !strcmp(s, ".allexcept"))
 			allexcept = 1;
 
-		if (arg_off_size(argc - 2, argv + 2, &dev, &off, &size) < 0)
+		if (arg_off_size(argc - 2, argv + 2, &dev, &off, &size,
+				 &maxsize) < 0)
 			return 1;
 
 		if (!nand_unlock(&nand_info[dev], off, size, allexcept)) {
@@ -873,7 +880,8 @@ static int nand_load_image(cmd_tbl_t *cmdtp, nand_info_t *nand,
 	printf("\nLoading from %s, offset 0x%lx\n", nand->name, offset);
 
 	cnt = nand->writesize;
-	r = nand_read_skip_bad(nand, offset, &cnt, (u_char *) addr);
+	r = nand_read_skip_bad(nand, offset, &cnt, NULL, nand->size,
+			(u_char *)addr);
 	if (r) {
 		puts("** Read error\n");
 		bootstage_error(BOOTSTAGE_ID_NAND_HDR_READ);
@@ -905,7 +913,8 @@ static int nand_load_image(cmd_tbl_t *cmdtp, nand_info_t *nand,
 	}
 	bootstage_mark(BOOTSTAGE_ID_NAND_TYPE);
 
-	r = nand_read_skip_bad(nand, offset, &cnt, (u_char *) addr);
+	r = nand_read_skip_bad(nand, offset, &cnt, NULL, nand->size,
+			(u_char *)addr);
 	if (r) {
 		puts("** Read error\n");
 		bootstage_error(BOOTSTAGE_ID_NAND_READ);

common/cmd_nvedit.c

@@ -62,9 +62,10 @@ DECLARE_GLOBAL_DATA_PTR;
 	!defined(CONFIG_ENV_IS_IN_ONENAND)	&& \
 	!defined(CONFIG_ENV_IS_IN_SPI_FLASH)	&& \
 	!defined(CONFIG_ENV_IS_IN_REMOTE)	&& \
+	!defined(CONFIG_ENV_IS_IN_UBI)		&& \
 	!defined(CONFIG_ENV_IS_NOWHERE)
 # error Define one of CONFIG_ENV_IS_IN_{EEPROM|FLASH|DATAFLASH|ONENAND|\
-SPI_FLASH|NVRAM|MMC|FAT|REMOTE} or CONFIG_ENV_IS_NOWHERE
+SPI_FLASH|NVRAM|MMC|FAT|REMOTE|UBI} or CONFIG_ENV_IS_NOWHERE
 #endif
 
 /*
@@ -273,6 +274,10 @@ int setenv(const char *varname, const char *varvalue)
 {
 	const char * const argv[4] = { "setenv", varname, varvalue, NULL };
 
+	/* before import into hashtable */
+	if (!(gd->flags & GD_FLG_ENV_READY))
+		return 1;
+
 	if (varvalue == NULL || varvalue[0] == '\0')
 		return _do_env_set(0, 2, (char * const *)argv);
 	else

common/cmd_pxe.c

@@ -1280,7 +1280,8 @@ static struct menu *pxe_menu_to_menu(struct pxe_menu *cfg)
 	/*
 	 * Create a menu and add items for all the labels.
 	 */
-	m = menu_create(cfg->title, cfg->timeout, cfg->prompt, label_print);
+	m = menu_create(cfg->title, cfg->timeout, cfg->prompt, label_print,
+			NULL, NULL);
 
 	if (!m)
 		return NULL;

common/cmd_scsi.c

@@ -110,7 +110,7 @@ void scsi_scan(int mode)
 		scsi_dev_desc[i].vendor[0]=0;
 		scsi_dev_desc[i].product[0]=0;
 		scsi_dev_desc[i].revision[0]=0;
-		scsi_dev_desc[i].removable=FALSE;
+		scsi_dev_desc[i].removable = false;
 		scsi_dev_desc[i].if_type=IF_TYPE_SCSI;
 		scsi_dev_desc[i].dev=i;
 		scsi_dev_desc[i].part_type=PART_TYPE_UNKNOWN;
@@ -125,7 +125,7 @@ void scsi_scan(int mode)
 			pccb->pdata=(unsigned char *)&tempbuff;
 			pccb->datalen=512;
 			scsi_setup_inquiry(pccb);
-			if(scsi_exec(pccb)!=TRUE) {
+			if (scsi_exec(pccb) != true) {
 				if(pccb->contr_stat==SCSI_SEL_TIME_OUT) {
 					debug ("Selection timeout ID %d\n",pccb->target);
 					continue; /* selection timeout => assuming no device present */
@@ -139,7 +139,7 @@ void scsi_scan(int mode)
 				continue; /* skip unknown devices */
 			}
 			if((modi&0x80)==0x80) /* drive is removable */
-				scsi_dev_desc[scsi_max_devs].removable=TRUE;
+				scsi_dev_desc[scsi_max_devs].removable=true;
 			/* get info for this device */
 			scsi_ident_cpy((unsigned char *)&scsi_dev_desc[scsi_max_devs].vendor[0],
 				       &tempbuff[8], 8);
@@ -152,8 +152,8 @@ void scsi_scan(int mode)
 
 			pccb->datalen=0;
 			scsi_setup_test_unit_ready(pccb);
-			if(scsi_exec(pccb)!=TRUE) {
-				if(scsi_dev_desc[scsi_max_devs].removable==TRUE) {
+			if (scsi_exec(pccb) != true) {
+				if (scsi_dev_desc[scsi_max_devs].removable == true) {
 					scsi_dev_desc[scsi_max_devs].type=perq;
 					goto removable;
 				}
@@ -404,7 +404,7 @@ static ulong scsi_read(int device, ulong blknr, lbaint_t blkcnt, void *buffer)
 		debug("scsi_read_ext: startblk " LBAF
 		      ", blccnt %x buffer %lx\n",
 		      start, smallblks, buf_addr);
-		if(scsi_exec(pccb)!=TRUE) {
+		if (scsi_exec(pccb) != true) {
 			scsi_print_error(pccb);
 			blkcnt-=blks;
 			break;
@@ -458,7 +458,7 @@ static ulong scsi_write(int device, ulong blknr,
 		}
 		debug("%s: startblk " LBAF ", blccnt %x buffer %lx\n",
 		      __func__, start, smallblks, buf_addr);
-		if (scsi_exec(pccb) != TRUE) {
+		if (scsi_exec(pccb) != true) {
 			scsi_print_error(pccb);
 			blkcnt -= blks;
 			break;
@@ -521,7 +521,7 @@ int scsi_read_capacity(ccb *pccb, lbaint_t *capacity, unsigned long *blksz)
 	pccb->msgout[0] = SCSI_IDENTIFY; /* NOT USED */
 
 	pccb->datalen = 8;
-	if (scsi_exec(pccb) != TRUE)
+	if (scsi_exec(pccb) != true)
 		return 1;
 
 	*capacity = ((lbaint_t)pccb->pdata[0] << 24) |
@@ -547,7 +547,7 @@ int scsi_read_capacity(ccb *pccb, lbaint_t *capacity, unsigned long *blksz)
 	pccb->msgout[0] = SCSI_IDENTIFY; /* NOT USED */
 
 	pccb->datalen = 16;
-	if (scsi_exec(pccb) != TRUE)
+	if (scsi_exec(pccb) != true)
 		return 1;
 
 	*capacity = ((uint64_t)pccb->pdata[0] << 56) |

common/cmd_sf.c

@@ -5,8 +5,8 @@
  * Licensed under the GPL-2 or later.
  */
 
-#include <div64.h>
 #include <common.h>
+#include <div64.h>
 #include <malloc.h>
 #include <spi_flash.h>