Merge branch 'for-linus' of git://git.linaro.org/people/rmk/linux-arm

Pull core ARM updates from Russell King:
 "This is the bulk of the core ARM updates for this merge window.
  Included in here is a different way to handle the VIVT cache flushing
  on context switch, which should allow scheduler folk to remove a
  special case in their core code.

  We have architectured timer support here, which is a set of timers
  specified by the ARM architecture for future SoCs.  So we should see
  less variability in timer design going forward.

  The last big thing here is my cleanup to the way we handle PCI across
  ARM, fixing some oddities in some platforms which hadn't realised
  there was a way to deal with their private data already built in to
  our PCI backend.

  I've also removed support for the ARMv3 architecture; it hasn't worked
  properly for years so it seems pointless to keep it around."

* 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (47 commits)
  ARM: PCI: remove per-pci_hw list of buses
  ARM: PCI: dove/kirkwood/mv78xx0: use sys->private_data
  ARM: PCI: provide a default bus scan implementation
  ARM: PCI: get rid of pci_std_swizzle()
  ARM: PCI: versatile: fix PCI interrupt setup
  ARM: PCI: integrator: use common PCI swizzle
  ARM: 7416/1: LPAE: Remove unused L_PTE_(BUFFERABLE|CACHEABLE) macros
  ARM: 7415/1: vfp: convert printk's to pr_*'s
  ARM: decompressor: avoid speculative prefetch from non-RAM areas
  ARM: Remove ARMv3 support from decompressor
  ARM: 7413/1: move read_{boot,persistent}_clock to the architecture level
  ARM: Remove support for ARMv3 ARM610 and ARM710 CPUs
  ARM: 7363/1: DEBUG_LL: limit early mapping to the minimum
  ARM: 7391/1: versatile: add some auxdata for device trees
  ARM: 7389/2: plat-versatile: modernize FPGA IRQ controller
  AMBA: get rid of last two uses of NO_IRQ
  ARM: 7408/1: cacheflush: return error to userspace when flushing syscall fails
  ARM: 7409/1: Do not call flush_cache_user_range with mmap_sem held
  ARM: 7404/1: cmpxchg64: use atomic64 and local64 routines for cmpxchg64
  ARM: 7347/1: SCU: use cpu_logical_map for per-CPU low power mode
  ...

Documentation/devicetree/bindings/arm/arch_timer.txt

@@ -0,0 +1,27 @@
+* ARM architected timer
+
+ARM Cortex-A7 and Cortex-A15 have a per-core architected timer, which
+provides per-cpu timers.
+
+The timer is attached to a GIC to deliver its per-processor interrupts.
+
+** Timer node properties:
+
+- compatible : Should at least contain "arm,armv7-timer".
+
+- interrupts : Interrupt list for secure, non-secure, virtual and
+  hypervisor timers, in that order.
+
+- clock-frequency : The frequency of the main counter, in Hz. Optional.
+
+Example:
+
+	timer {
+		compatible = "arm,cortex-a15-timer",
+			     "arm,armv7-timer";
+		interrupts = <1 13 0xf08>,
+			     <1 14 0xf08>,
+			     <1 11 0xf08>,
+			     <1 10 0xf08>;
+		clock-frequency = <100000000>;
+	};

arch/arm/Kconfig

@@ -11,6 +11,7 @@ config ARM
 	select HAVE_OPROFILE if (HAVE_PERF_EVENTS)
 	select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL
 	select HAVE_ARCH_KGDB
+	select HAVE_ARCH_TRACEHOOK
 	select HAVE_KPROBES if !XIP_KERNEL
 	select HAVE_KRETPROBES if (HAVE_KPROBES)
 	select HAVE_FUNCTION_TRACER if (!XIP_KERNEL)
@@ -30,6 +31,8 @@ config ARM
 	select HAVE_HW_BREAKPOINT if (PERF_EVENTS && (CPU_V6 || CPU_V6K || CPU_V7))
 	select HAVE_C_RECORDMCOUNT
 	select HAVE_GENERIC_HARDIRQS
+	select HARDIRQS_SW_RESEND
+	select GENERIC_IRQ_PROBE
 	select GENERIC_IRQ_SHOW
 	select CPU_PM if (SUSPEND || CPU_IDLE)
 	select GENERIC_PCI_IOMAP
@@ -126,14 +129,6 @@ config TRACE_IRQFLAGS_SUPPORT
 	bool
 	default y
 
-config HARDIRQS_SW_RESEND
-	bool
-	default y
-
-config GENERIC_IRQ_PROBE
-	bool
-	default y
-
 config GENERIC_LOCKBREAK
 	bool
 	default y
@@ -280,6 +275,7 @@ config ARCH_INTEGRATOR
 	select NEED_MACH_IO_H
 	select NEED_MACH_MEMORY_H
 	select SPARSE_IRQ
+	select MULTI_IRQ_HANDLER
 	help
 	  Support for ARM's Integrator platform.
 
@@ -632,7 +628,6 @@ config ARCH_MMP
 	select CLKDEV_LOOKUP
 	select GENERIC_CLOCKEVENTS
 	select GPIO_PXA
-	select TICK_ONESHOT
 	select PLAT_PXA
 	select SPARSE_IRQ
 	select GENERIC_ALLOCATOR
@@ -716,7 +711,6 @@ config ARCH_PXA
 	select ARCH_REQUIRE_GPIOLIB
 	select GENERIC_CLOCKEVENTS
 	select GPIO_PXA
-	select TICK_ONESHOT
 	select PLAT_PXA
 	select SPARSE_IRQ
 	select AUTO_ZRELADDR
@@ -783,7 +777,6 @@ config ARCH_SA1100
 	select CPU_FREQ
 	select GENERIC_CLOCKEVENTS
 	select CLKDEV_LOOKUP
-	select TICK_ONESHOT
 	select ARCH_REQUIRE_GPIOLIB
 	select HAVE_IDE
 	select NEED_MACH_MEMORY_H
@@ -1552,10 +1545,15 @@ config HAVE_ARM_SCU
 	help
 	  This option enables support for the ARM system coherency unit
 
+config ARM_ARCH_TIMER
+	bool "Architected timer support"
+	depends on CPU_V7
+	help
+	  This option enables support for the ARM architected timer
+
 config HAVE_ARM_TWD
 	bool
 	depends on SMP
-	select TICK_ONESHOT
 	help
 	  This options enables support for the ARM timer and watchdog unit
 

arch/arm/Makefile

@@ -70,8 +70,6 @@ arch-$(CONFIG_CPU_32v4)		:=-D__LINUX_ARM_ARCH__=4 -march=armv4
 arch-$(CONFIG_CPU_32v3)		:=-D__LINUX_ARM_ARCH__=3 -march=armv3
 
 # This selects how we optimise for the processor.
-tune-$(CONFIG_CPU_ARM610)	:=-mtune=arm610
-tune-$(CONFIG_CPU_ARM710)	:=-mtune=arm710
 tune-$(CONFIG_CPU_ARM7TDMI)	:=-mtune=arm7tdmi
 tune-$(CONFIG_CPU_ARM720T)	:=-mtune=arm7tdmi
 tune-$(CONFIG_CPU_ARM740T)	:=-mtune=arm7tdmi

arch/arm/boot/compressed/head.S

@@ -567,6 +567,12 @@ __armv3_mpu_cache_on:
 		mcr	p15, 0, r0, c7, c0, 0	@ invalidate whole cache v3
 		mov	pc, lr
 
+#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
+#define CB_BITS 0x08
+#else
+#define CB_BITS 0x0c
+#endif
+
 __setup_mmu:	sub	r3, r4, #16384		@ Page directory size
 		bic	r3, r3, #0xff		@ Align the pointer
 		bic	r3, r3, #0x3f00
@@ -578,17 +584,14 @@ __setup_mmu:	sub	r3, r4, #16384		@ Page directory size
 		mov	r9, r0, lsr #18
 		mov	r9, r9, lsl #18		@ start of RAM
 		add	r10, r9, #0x10000000	@ a reasonable RAM size
-		mov	r1, #0x12
-		orr	r1, r1, #3 << 10
+		mov	r1, #0x12		@ XN|U + section mapping
+		orr	r1, r1, #3 << 10	@ AP=11
 		add	r2, r3, #16384
 1:		cmp	r1, r9			@ if virt > start of RAM
-#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
-		orrhs	r1, r1, #0x08		@ set cacheable
-#else
-		orrhs	r1, r1, #0x0c		@ set cacheable, bufferable
-#endif
-		cmp	r1, r10			@ if virt > end of RAM
-		bichs	r1, r1, #0x0c		@ clear cacheable, bufferable
+		cmphs	r10, r1			@   && end of RAM > virt
+		bic	r1, r1, #0x1c		@ clear XN|U + C + B
+		orrlo	r1, r1, #0x10		@ Set XN|U for non-RAM
+		orrhs	r1, r1, r6		@ set RAM section settings
 		str	r1, [r0], #4		@ 1:1 mapping
 		add	r1, r1, #1048576
 		teq	r0, r2
@@ -599,7 +602,7 @@ __setup_mmu:	sub	r3, r4, #16384		@ Page directory size
  * so there is no map overlap problem for up to 1 MB compressed kernel.
  * If the execution is in RAM then we would only be duplicating the above.
  */
-		mov	r1, #0x1e
+		orr	r1, r6, #0x04		@ ensure B is set for this
 		orr	r1, r1, #3 << 10
 		mov	r2, pc
 		mov	r2, r2, lsr #20
@@ -620,6 +623,7 @@ __arm926ejs_mmu_cache_on:
 __armv4_mmu_cache_on:
 		mov	r12, lr
 #ifdef CONFIG_MMU
+		mov	r6, #CB_BITS | 0x12	@ U
 		bl	__setup_mmu
 		mov	r0, #0
 		mcr	p15, 0, r0, c7, c10, 4	@ drain write buffer
@@ -641,6 +645,7 @@ __armv7_mmu_cache_on:
 #ifdef CONFIG_MMU
 		mrc	p15, 0, r11, c0, c1, 4	@ read ID_MMFR0
 		tst	r11, #0xf		@ VMSA
+		movne	r6, #CB_BITS | 0x02	@ !XN
 		blne	__setup_mmu
 		mov	r0, #0
 		mcr	p15, 0, r0, c7, c10, 4	@ drain write buffer
@@ -655,7 +660,7 @@ __armv7_mmu_cache_on:
 		orr	r0, r0, #1 << 25	@ big-endian page tables
 #endif
 		orrne	r0, r0, #1		@ MMU enabled
-		movne	r1, #-1
+		movne	r1, #0xfffffffd		@ domain 0 = client
 		mcrne	p15, 0, r3, c2, c0, 0	@ load page table pointer
 		mcrne	p15, 0, r1, c3, c0, 0	@ load domain access control
 #endif
@@ -668,6 +673,7 @@ __armv7_mmu_cache_on:
 
 __fa526_cache_on:
 		mov	r12, lr
+		mov	r6, #CB_BITS | 0x12	@ U
 		bl	__setup_mmu
 		mov	r0, #0
 		mcr	p15, 0, r0, c7, c7, 0	@ Invalidate whole cache
@@ -680,18 +686,6 @@ __fa526_cache_on:
 		mcr	p15, 0, r0, c8, c7, 0	@ flush UTLB
 		mov	pc, r12
 
-__arm6_mmu_cache_on:
-		mov	r12, lr
-		bl	__setup_mmu
-		mov	r0, #0
-		mcr	p15, 0, r0, c7, c0, 0	@ invalidate whole cache v3
-		mcr	p15, 0, r0, c5, c0, 0	@ invalidate whole TLB v3
-		mov	r0, #0x30
-		bl	__common_mmu_cache_on
-		mov	r0, #0
-		mcr	p15, 0, r0, c5, c0, 0	@ invalidate whole TLB v3
-		mov	pc, r12
-
 __common_mmu_cache_on:
 #ifndef CONFIG_THUMB2_KERNEL
 #ifndef DEBUG
@@ -756,16 +750,6 @@ call_cache_fn:	adr	r12, proc_types
 		.align	2
 		.type	proc_types,#object
 proc_types:
-		.word	0x41560600		@ ARM6/610
-		.word	0xffffffe0
-		W(b)	__arm6_mmu_cache_off	@ works, but slow
-		W(b)	__arm6_mmu_cache_off
-		mov	pc, lr
- THUMB(		nop				)
-@		b	__arm6_mmu_cache_on		@ untested
-@		b	__arm6_mmu_cache_off
-@		b	__armv3_mmu_cache_flush
-
 		.word	0x00000000		@ old ARM ID
 		.word	0x0000f000
 		mov	pc, lr
@@ -777,8 +761,10 @@ proc_types:
 
 		.word	0x41007000		@ ARM7/710
 		.word	0xfff8fe00
-		W(b)	__arm7_mmu_cache_off
-		W(b)	__arm7_mmu_cache_off
+		mov	pc, lr
+ THUMB(		nop				)
+		mov	pc, lr
+ THUMB(		nop				)
 		mov	pc, lr
  THUMB(		nop				)
 
@@ -977,21 +963,6 @@ __armv7_mmu_cache_off:
 		mcr	p15, 0, r0, c7, c5, 4	@ ISB
 		mov	pc, r12
 
-__arm6_mmu_cache_off:
-		mov	r0, #0x00000030		@ ARM6 control reg.
-		b	__armv3_mmu_cache_off
-
-__arm7_mmu_cache_off:
-		mov	r0, #0x00000070		@ ARM7 control reg.
-		b	__armv3_mmu_cache_off
-
-__armv3_mmu_cache_off:
-		mcr	p15, 0, r0, c1, c0, 0	@ turn MMU and cache off
-		mov	r0, #0
-		mcr	p15, 0, r0, c7, c0, 0	@ invalidate whole cache v3
-		mcr	p15, 0, r0, c5, c0, 0	@ invalidate whole TLB v3
-		mov	pc, lr
-
 /*
  * Clean and flush the cache to maintain consistency.
  *

arch/arm/common/it8152.c

@@ -222,7 +222,7 @@ static int it8152_pci_write_config(struct pci_bus *bus,
 	return PCIBIOS_SUCCESSFUL;
 }
 
-static struct pci_ops it8152_ops = {
+struct pci_ops it8152_ops = {
 	.read = it8152_pci_read_config,
 	.write = it8152_pci_write_config,
 };
@@ -346,9 +346,4 @@ void pcibios_set_master(struct pci_dev *dev)
 }
 
 
-struct pci_bus * __init it8152_pci_scan_bus(int nr, struct pci_sys_data *sys)
-{
-	return pci_scan_root_bus(NULL, nr, &it8152_ops, sys, &sys->resources);
-}
-
 EXPORT_SYMBOL(dma_set_coherent_mask);

arch/arm/common/via82c505.c

@@ -51,7 +51,7 @@ via82c505_write_config(struct pci_bus *bus, unsigned int devfn, int where,
 	return PCIBIOS_SUCCESSFUL;
 }
 
-static struct pci_ops via82c505_ops = {
+struct pci_ops via82c505_ops = {
 	.read	= via82c505_read_config,
 	.write	= via82c505_write_config,
 };
@@ -81,12 +81,3 @@ int __init via82c505_setup(int nr, struct pci_sys_data *sys)
 {
 	return (nr == 0);
 }
-
-struct pci_bus * __init via82c505_scan_bus(int nr, struct pci_sys_data *sysdata)
-{
-	if (nr == 0)
-		return pci_scan_root_bus(NULL, 0, &via82c505_ops, sysdata,
-					 &sysdata->resources);
-
-	return NULL;
-}

arch/arm/common/vic.c

@@ -39,6 +39,7 @@
  * struct vic_device - VIC PM device
  * @irq: The IRQ number for the base of the VIC.
  * @base: The register base for the VIC.
+ * @valid_sources: A bitmask of valid interrupts
  * @resume_sources: A bitmask of interrupts for resume.
  * @resume_irqs: The IRQs enabled for resume.
  * @int_select: Save for VIC_INT_SELECT.
@@ -50,6 +51,7 @@
 struct vic_device {
 	void __iomem	*base;
 	int		irq;
+	u32		valid_sources;
 	u32		resume_sources;
 	u32		resume_irqs;
 	u32		int_select;
@@ -164,10 +166,32 @@ static int __init vic_pm_init(void)
 late_initcall(vic_pm_init);
 #endif /* CONFIG_PM */
 
+static struct irq_chip vic_chip;
+
+static int vic_irqdomain_map(struct irq_domain *d, unsigned int irq,
+			     irq_hw_number_t hwirq)
+{
+	struct vic_device *v = d->host_data;
+
+	/* Skip invalid IRQs, only register handlers for the real ones */
+	if (!(v->valid_sources & (1 << hwirq)))
+		return -ENOTSUPP;
+	irq_set_chip_and_handler(irq, &vic_chip, handle_level_irq);
+	irq_set_chip_data(irq, v->base);
+	set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+	return 0;
+}
+
+static struct irq_domain_ops vic_irqdomain_ops = {
+	.map = vic_irqdomain_map,
+	.xlate = irq_domain_xlate_onetwocell,
+};
+
 /**
  * vic_register() - Register a VIC.
  * @base: The base address of the VIC.
  * @irq: The base IRQ for the VIC.
+ * @valid_sources: bitmask of valid interrupts
  * @resume_sources: bitmask of interrupts allowed for resume sources.
  * @node: The device tree node associated with the VIC.
  *
@@ -178,7 +202,8 @@ late_initcall(vic_pm_init);
  * This also configures the IRQ domain for the VIC.
  */
 static void __init vic_register(void __iomem *base, unsigned int irq,
-				u32 resume_sources, struct device_node *node)
+				u32 valid_sources, u32 resume_sources,
+				struct device_node *node)
 {
 	struct vic_device *v;
 
@@ -189,11 +214,12 @@ static void __init vic_register(void __iomem *base, unsigned int irq,
 
 	v = &vic_devices[vic_id];
 	v->base = base;
+	v->valid_sources = valid_sources;
 	v->resume_sources = resume_sources;
 	v->irq = irq;
 	vic_id++;
-	v->domain = irq_domain_add_legacy(node, 32, irq, 0,
-					  &irq_domain_simple_ops, v);
+	v->domain = irq_domain_add_legacy(node, fls(valid_sources), irq, 0,
+					  &vic_irqdomain_ops, v);
 }
 
 static void vic_ack_irq(struct irq_data *d)
@@ -287,23 +313,6 @@ static void __init vic_clear_interrupts(void __iomem *base)
 	}
 }
 
-static void __init vic_set_irq_sources(void __iomem *base,
-				unsigned int irq_start, u32 vic_sources)
-{
-	unsigned int i;
-
-	for (i = 0; i < 32; i++) {
-		if (vic_sources & (1 << i)) {
-			unsigned int irq = irq_start + i;
-
-			irq_set_chip_and_handler(irq, &vic_chip,
-						 handle_level_irq);
-			irq_set_chip_data(irq, base);
-			set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
-		}
-	}
-}
-
 /*
  * The PL190 cell from ARM has been modified by ST to handle 64 interrupts.
  * The original cell has 32 interrupts, while the modified one has 64,
@@ -338,8 +347,7 @@ static void __init vic_init_st(void __iomem *base, unsigned int irq_start,
 		writel(32, base + VIC_PL190_DEF_VECT_ADDR);
 	}
 
-	vic_set_irq_sources(base, irq_start, vic_sources);
-	vic_register(base, irq_start, 0, node);
+	vic_register(base, irq_start, vic_sources, 0, node);
 }
 
 void __init __vic_init(void __iomem *base, unsigned int irq_start,
@@ -379,9 +387,7 @@ void __init __vic_init(void __iomem *base, unsigned int irq_start,
 
 	vic_init2(base);
 
-	vic_set_irq_sources(base, irq_start, vic_sources);
-
-	vic_register(base, irq_start, resume_sources, node);
+	vic_register(base, irq_start, vic_sources, resume_sources, node);
 }
 
 /**

arch/arm/configs/rpc_defconfig

@@ -8,8 +8,6 @@ CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_ARCH_RPC=y
-CONFIG_CPU_ARM610=y
-CONFIG_CPU_ARM710=y
 CONFIG_CPU_SA110=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0

arch/arm/include/asm/arch_timer.h

@@ -0,0 +1,19 @@
+#ifndef __ASMARM_ARCH_TIMER_H
+#define __ASMARM_ARCH_TIMER_H
+
+#ifdef CONFIG_ARM_ARCH_TIMER
+int arch_timer_of_register(void);
+int arch_timer_sched_clock_init(void);
+#else
+static inline int arch_timer_of_register(void)
+{
+	return -ENXIO;
+}
+
+static inline int arch_timer_sched_clock_init(void)
+{
+	return -ENXIO;
+}
+#endif
+
+#endif

arch/arm/include/asm/cacheflush.h

@@ -101,7 +101,7 @@ struct cpu_cache_fns {
 	void (*flush_user_range)(unsigned long, unsigned long, unsigned int);
 
 	void (*coherent_kern_range)(unsigned long, unsigned long);
-	void (*coherent_user_range)(unsigned long, unsigned long);
+	int  (*coherent_user_range)(unsigned long, unsigned long);
 	void (*flush_kern_dcache_area)(void *, size_t);
 
 	void (*dma_map_area)(const void *, size_t, int);
@@ -142,7 +142,7 @@ extern void __cpuc_flush_kern_all(void);
 extern void __cpuc_flush_user_all(void);
 extern void __cpuc_flush_user_range(unsigned long, unsigned long, unsigned int);
 extern void __cpuc_coherent_kern_range(unsigned long, unsigned long);
-extern void __cpuc_coherent_user_range(unsigned long, unsigned long);
+extern int  __cpuc_coherent_user_range(unsigned long, unsigned long);
 extern void __cpuc_flush_dcache_area(void *, size_t);
 
 /*
@@ -249,7 +249,7 @@ extern void flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr
  * Harvard caches are synchronised for the user space address range.
  * This is used for the ARM private sys_cacheflush system call.
  */
-#define flush_cache_user_range(vma,start,end) \
+#define flush_cache_user_range(start,end) \
 	__cpuc_coherent_user_range((start) & PAGE_MASK, PAGE_ALIGN(end))
 
 /*

arch/arm/include/asm/cmpxchg.h

@@ -229,66 +229,19 @@ static inline unsigned long __cmpxchg_local(volatile void *ptr,
 				       (unsigned long)(n),		\
 				       sizeof(*(ptr))))
 
-#ifndef CONFIG_CPU_V6	/* min ARCH >= ARMv6K */
-
-/*
- * Note : ARMv7-M (currently unsupported by Linux) does not support
- * ldrexd/strexd. If ARMv7-M is ever supported by the Linux kernel, it should
- * not be allowed to use __cmpxchg64.
- */
-static inline unsigned long long __cmpxchg64(volatile void *ptr,
-					     unsigned long long old,
-					     unsigned long long new)
-{
-	register unsigned long long oldval asm("r0");
-	register unsigned long long __old asm("r2") = old;
-	register unsigned long long __new asm("r4") = new;
-	unsigned long res;
-
-	do {
-		asm volatile(
-		"	@ __cmpxchg8\n"
-		"	ldrexd	%1, %H1, [%2]\n"
-		"	mov	%0, #0\n"
-		"	teq	%1, %3\n"
-		"	teqeq	%H1, %H3\n"
-		"	strexdeq %0, %4, %H4, [%2]\n"
-			: "=&r" (res), "=&r" (oldval)
-			: "r" (ptr), "Ir" (__old), "r" (__new)
-			: "memory", "cc");
-	} while (res);
-
-	return oldval;
-}
-
-static inline unsigned long long __cmpxchg64_mb(volatile void *ptr,
-						unsigned long long old,
-						unsigned long long new)
-{
-	unsigned long long ret;
-
-	smp_mb();
-	ret = __cmpxchg64(ptr, old, new);
-	smp_mb();
-
-	return ret;
-}
-
-#define cmpxchg64(ptr,o,n)						\
-	((__typeof__(*(ptr)))__cmpxchg64_mb((ptr),			\
-					    (unsigned long long)(o),	\
-					    (unsigned long long)(n)))
-
-#define cmpxchg64_local(ptr,o,n)					\
-	((__typeof__(*(ptr)))__cmpxchg64((ptr),				\
-					 (unsigned long long)(o),	\
-					 (unsigned long long)(n)))
-
-#else /* min ARCH = ARMv6 */
-
-#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n))
-
-#endif
+#define cmpxchg64(ptr, o, n)						\
+	((__typeof__(*(ptr)))atomic64_cmpxchg(container_of((ptr),	\
+						atomic64_t,		\
+						counter),		\
+					      (unsigned long)(o),	\
+					      (unsigned long)(n)))
+
+#define cmpxchg64_local(ptr, o, n)					\
+	((__typeof__(*(ptr)))local64_cmpxchg(container_of((ptr),	\
+						local64_t,		\
+						a),			\
+					     (unsigned long)(o),	\
+					     (unsigned long)(n)))
 
 #endif	/* __LINUX_ARM_ARCH__ >= 6 */
 

arch/arm/include/asm/glue-df.h

@@ -31,14 +31,6 @@
 #undef CPU_DABORT_HANDLER
 #undef MULTI_DABORT
 
-#if defined(CONFIG_CPU_ARM610)
-# ifdef CPU_DABORT_HANDLER
-#  define MULTI_DABORT 1
-# else
-#  define CPU_DABORT_HANDLER cpu_arm6_data_abort
-# endif
-#endif
-
 #if defined(CONFIG_CPU_ARM710)
 # ifdef CPU_DABORT_HANDLER
 #  define MULTI_DABORT 1

arch/arm/include/asm/glue-proc.h

@@ -23,15 +23,6 @@
  * CPU_NAME - the prefix for CPU related functions
  */
 
-#ifdef CONFIG_CPU_ARM610
-# ifdef CPU_NAME
-#  undef  MULTI_CPU
-#  define MULTI_CPU
-# else
-#  define CPU_NAME cpu_arm6
-# endif
-#endif
-
 #ifdef CONFIG_CPU_ARM7TDMI
 # ifdef CPU_NAME
 #  undef  MULTI_CPU
@@ -41,15 +32,6 @@
 # endif
 #endif
 
-#ifdef CONFIG_CPU_ARM710
-# ifdef CPU_NAME
-#  undef  MULTI_CPU
-#  define MULTI_CPU
-# else
-#  define CPU_NAME cpu_arm7
-# endif
-#endif
-
 #ifdef CONFIG_CPU_ARM720T
 # ifdef CPU_NAME
 #  undef  MULTI_CPU

arch/arm/include/asm/hardware/it8152.h

@@ -110,6 +110,6 @@ extern void it8152_irq_demux(unsigned int irq, struct irq_desc *desc);
 extern void it8152_init_irq(void);
 extern int it8152_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin);
 extern int it8152_pci_setup(int nr, struct pci_sys_data *sys);
-extern struct pci_bus *it8152_pci_scan_bus(int nr, struct pci_sys_data *sys);
+extern struct pci_ops it8152_ops;
 
 #endif /* __ASM_HARDWARE_IT8152_H */

arch/arm/include/asm/mach/pci.h

@@ -12,13 +12,14 @@
 #define __ASM_MACH_PCI_H
 
 struct pci_sys_data;
+struct pci_ops;
 struct pci_bus;
 
 struct hw_pci {
 #ifdef CONFIG_PCI_DOMAINS
 	int		domain;
 #endif
-	struct list_head buses;
+	struct pci_ops	*ops;
 	int		nr_controllers;
 	int		(*setup)(int nr, struct pci_sys_data *);
 	struct pci_bus *(*scan)(int nr, struct pci_sys_data *);
@@ -45,15 +46,9 @@ struct pci_sys_data {
 	u8		(*swizzle)(struct pci_dev *, u8 *);
 					/* IRQ mapping				*/
 	int		(*map_irq)(const struct pci_dev *, u8, u8);
-	struct hw_pci	*hw;
 	void		*private_data;	/* platform controller private data	*/
 };
 
-/*
- * This is the standard PCI-PCI bridge swizzling algorithm.
- */
-#define pci_std_swizzle pci_common_swizzle
-
 /*
  * Call this with your hw_pci struct to initialise the PCI system.
  */
@@ -62,22 +57,22 @@ void pci_common_init(struct hw_pci *);
 /*
  * PCI controllers
  */
+extern struct pci_ops iop3xx_ops;
 extern int iop3xx_pci_setup(int nr, struct pci_sys_data *);
-extern struct pci_bus *iop3xx_pci_scan_bus(int nr, struct pci_sys_data *);
 extern void iop3xx_pci_preinit(void);
 extern void iop3xx_pci_preinit_cond(void);
 
+extern struct pci_ops dc21285_ops;
 extern int dc21285_setup(int nr, struct pci_sys_data *);
-extern struct pci_bus *dc21285_scan_bus(int nr, struct pci_sys_data *);
 extern void dc21285_preinit(void);
 extern void dc21285_postinit(void);
 
+extern struct pci_ops via82c505_ops;
 extern int via82c505_setup(int nr, struct pci_sys_data *);
-extern struct pci_bus *via82c505_scan_bus(int nr, struct pci_sys_data *);
 extern void via82c505_init(void *sysdata);
 
+extern struct pci_ops pci_v3_ops;
 extern int pci_v3_setup(int nr, struct pci_sys_data *);
-extern struct pci_bus *pci_v3_scan_bus(int nr, struct pci_sys_data *);
 extern void pci_v3_preinit(void);
 extern void pci_v3_postinit(void);
 

arch/arm/include/asm/mach/time.h

@@ -42,4 +42,9 @@ struct sys_timer {
 
 extern void timer_tick(void);
 
+struct timespec;
+typedef void (*clock_access_fn)(struct timespec *);
+extern int register_persistent_clock(clock_access_fn read_boot,
+				     clock_access_fn read_persistent);
+
 #endif

arch/arm/include/asm/mmu.h

@@ -34,11 +34,4 @@ typedef struct {
 
 #endif
 
-/*
- * switch_mm() may do a full cache flush over the context switch,
- * so enable interrupts over the context switch to avoid high
- * latency.
- */
-#define __ARCH_WANT_INTERRUPTS_ON_CTXSW
-
 #endif

arch/arm/include/asm/mmu_context.h

@@ -43,45 +43,104 @@ void __check_kvm_seq(struct mm_struct *mm);
 #define ASID_FIRST_VERSION	(1 << ASID_BITS)
 
 extern unsigned int cpu_last_asid;
-#ifdef CONFIG_SMP
-DECLARE_PER_CPU(struct mm_struct *, current_mm);
-#endif
 
 void __init_new_context(struct task_struct *tsk, struct mm_struct *mm);
 void __new_context(struct mm_struct *mm);
+void cpu_set_reserved_ttbr0(void);
 
-static inline void check_context(struct mm_struct *mm)
+static inline void switch_new_context(struct mm_struct *mm)
 {
-	/*
-	 * This code is executed with interrupts enabled. Therefore,
-	 * mm->context.id cannot be updated to the latest ASID version
-	 * on a different CPU (and condition below not triggered)
-	 * without first getting an IPI to reset the context. The
-	 * alternative is to take a read_lock on mm->context.id_lock
-	 * (after changing its type to rwlock_t).
-	 */
-	if (unlikely((mm->context.id ^ cpu_last_asid) >> ASID_BITS))
-		__new_context(mm);
+	unsigned long flags;
+
+	__new_context(mm);
+
+	local_irq_save(flags);
+	cpu_switch_mm(mm->pgd, mm);
+	local_irq_restore(flags);
+}
 
+static inline void check_and_switch_context(struct mm_struct *mm,
+					    struct task_struct *tsk)
+{
 	if (unlikely(mm->context.kvm_seq != init_mm.context.kvm_seq))
 		__check_kvm_seq(mm);
+
+	/*
+	 * Required during context switch to avoid speculative page table
+	 * walking with the wrong TTBR.
+	 */
+	cpu_set_reserved_ttbr0();
+
+	if (!((mm->context.id ^ cpu_last_asid) >> ASID_BITS))
+		/*
+		 * The ASID is from the current generation, just switch to the
+		 * new pgd. This condition is only true for calls from
+		 * context_switch() and interrupts are already disabled.
+		 */
+		cpu_switch_mm(mm->pgd, mm);
+	else if (irqs_disabled())
+		/*
+		 * Defer the new ASID allocation until after the context
+		 * switch critical region since __new_context() cannot be
+		 * called with interrupts disabled (it sends IPIs).
+		 */
+		set_ti_thread_flag(task_thread_info(tsk), TIF_SWITCH_MM);
+	else
+		/*
+		 * That is a direct call to switch_mm() or activate_mm() with
+		 * interrupts enabled and a new context.
+		 */
+		switch_new_context(mm);
 }
 
 #define init_new_context(tsk,mm)	(__init_new_context(tsk,mm),0)
 
-#else
-
-static inline void check_context(struct mm_struct *mm)
+#define finish_arch_post_lock_switch \
+	finish_arch_post_lock_switch
+static inline void finish_arch_post_lock_switch(void)
 {
+	if (test_and_clear_thread_flag(TIF_SWITCH_MM))
+		switch_new_context(current->mm);
+}
+
+#else	/* !CONFIG_CPU_HAS_ASID */
+
 #ifdef CONFIG_MMU
+
+static inline void check_and_switch_context(struct mm_struct *mm,
+					    struct task_struct *tsk)
+{
 	if (unlikely(mm->context.kvm_seq != init_mm.context.kvm_seq))
 		__check_kvm_seq(mm);
-#endif
+
+	if (irqs_disabled())
+		/*
+		 * cpu_switch_mm() needs to flush the VIVT caches. To avoid
+		 * high interrupt latencies, defer the call and continue
+		 * running with the old mm. Since we only support UP systems
+		 * on non-ASID CPUs, the old mm will remain valid until the
+		 * finish_arch_post_lock_switch() call.
+		 */
+		set_ti_thread_flag(task_thread_info(tsk), TIF_SWITCH_MM);
+	else
+		cpu_switch_mm(mm->pgd, mm);
 }
 
+#define finish_arch_post_lock_switch \
+	finish_arch_post_lock_switch
+static inline void finish_arch_post_lock_switch(void)
+{
+	if (test_and_clear_thread_flag(TIF_SWITCH_MM)) {
+		struct mm_struct *mm = current->mm;
+		cpu_switch_mm(mm->pgd, mm);
+	}
+}
+
+#endif	/* CONFIG_MMU */
+
 #define init_new_context(tsk,mm)	0
 
-#endif
+#endif	/* CONFIG_CPU_HAS_ASID */
 
 #define destroy_context(mm)		do { } while(0)
 
@@ -119,12 +178,7 @@ switch_mm(struct mm_struct *prev, struct mm_struct *next,
 		__flush_icache_all();
 #endif
 	if (!cpumask_test_and_set_cpu(cpu, mm_cpumask(next)) || prev != next) {
-#ifdef CONFIG_SMP
-		struct mm_struct **crt_mm = &per_cpu(current_mm, cpu);
-		*crt_mm = next;
-#endif
-		check_context(next);
-		cpu_switch_mm(next->pgd, next);
+		check_and_switch_context(next, tsk);
 		if (cache_is_vivt())
 			cpumask_clear_cpu(cpu, mm_cpumask(prev));
 	}

arch/arm/include/asm/page.h

@@ -34,7 +34,6 @@
  *	processor(s) we're building for.
  *
  *	We have the following to choose from:
- *	  v3		- ARMv3
  *	  v4wt		- ARMv4 with writethrough cache, without minicache
  *	  v4wb		- ARMv4 with writeback cache, without minicache
  *	  v4_mc		- ARMv4 with minicache
@@ -44,14 +43,6 @@
 #undef _USER
 #undef MULTI_USER
 
-#ifdef CONFIG_CPU_COPY_V3
-# ifdef _USER
-#  define MULTI_USER 1
-# else
-#  define _USER v3
-# endif
-#endif
-
 #ifdef CONFIG_CPU_COPY_V4WT
 # ifdef _USER
 #  define MULTI_USER 1

arch/arm/include/asm/pgtable-3level.h

@@ -69,8 +69,6 @@
  */
 #define L_PTE_PRESENT		(_AT(pteval_t, 3) << 0)		/* Valid */
 #define L_PTE_FILE		(_AT(pteval_t, 1) << 2)		/* only when !PRESENT */
-#define L_PTE_BUFFERABLE	(_AT(pteval_t, 1) << 2)		/* AttrIndx[0] */
-#define L_PTE_CACHEABLE		(_AT(pteval_t, 1) << 3)		/* AttrIndx[1] */
 #define L_PTE_USER		(_AT(pteval_t, 1) << 6)		/* AP[1] */
 #define L_PTE_RDONLY		(_AT(pteval_t, 1) << 7)		/* AP[2] */
 #define L_PTE_SHARED		(_AT(pteval_t, 3) << 8)		/* SH[1:0], inner shareable */

arch/arm/include/asm/ptrace.h

@@ -249,6 +249,11 @@ static inline unsigned long kernel_stack_pointer(struct pt_regs *regs)
 	return regs->ARM_sp;
 }
 
+static inline unsigned long user_stack_pointer(struct pt_regs *regs)
+{
+	return regs->ARM_sp;
+}
+
 #endif /* __KERNEL__ */
 
 #endif /* __ASSEMBLY__ */

arch/arm/include/asm/syscall.h

@@ -0,0 +1,93 @@
+/*
+ * Access to user system call parameters and results
+ *
+ * See asm-generic/syscall.h for descriptions of what we must do here.
+ */
+
+#ifndef _ASM_ARM_SYSCALL_H
+#define _ASM_ARM_SYSCALL_H
+
+#include <linux/err.h>
+
+extern const unsigned long sys_call_table[];
+
+static inline int syscall_get_nr(struct task_struct *task,
+				 struct pt_regs *regs)
+{
+	return task_thread_info(task)->syscall;
+}
+
+static inline void syscall_rollback(struct task_struct *task,
+				    struct pt_regs *regs)
+{
+	regs->ARM_r0 = regs->ARM_ORIG_r0;
+}
+
+static inline long syscall_get_error(struct task_struct *task,
+				     struct pt_regs *regs)
+{
+	unsigned long error = regs->ARM_r0;
+	return IS_ERR_VALUE(error) ? error : 0;
+}
+
+static inline long syscall_get_return_value(struct task_struct *task,
+					    struct pt_regs *regs)
+{
+	return regs->ARM_r0;
+}
+
+static inline void syscall_set_return_value(struct task_struct *task,
+					    struct pt_regs *regs,
+					    int error, long val)
+{
+	regs->ARM_r0 = (long) error ? error : val;
+}
+
+#define SYSCALL_MAX_ARGS 7
+
+static inline void syscall_get_arguments(struct task_struct *task,
+					 struct pt_regs *regs,
+					 unsigned int i, unsigned int n,
+					 unsigned long *args)
+{
+	if (i + n > SYSCALL_MAX_ARGS) {
+		unsigned long *args_bad = args + SYSCALL_MAX_ARGS - i;
+		unsigned int n_bad = n + i - SYSCALL_MAX_ARGS;
+		pr_warning("%s called with max args %d, handling only %d\n",
+			   __func__, i + n, SYSCALL_MAX_ARGS);
+		memset(args_bad, 0, n_bad * sizeof(args[0]));
+		n = SYSCALL_MAX_ARGS - i;
+	}
+
+	if (i == 0) {
+		args[0] = regs->ARM_ORIG_r0;
+		args++;
+		i++;
+		n--;
+	}
+
+	memcpy(args, &regs->ARM_r0 + i, n * sizeof(args[0]));
+}
+
+static inline void syscall_set_arguments(struct task_struct *task,
+					 struct pt_regs *regs,
+					 unsigned int i, unsigned int n,
+					 const unsigned long *args)
+{
+	if (i + n > SYSCALL_MAX_ARGS) {
+		pr_warning("%s called with max args %d, handling only %d\n",
+			   __func__, i + n, SYSCALL_MAX_ARGS);
+		n = SYSCALL_MAX_ARGS - i;
+	}
+
+	if (i == 0) {
+		regs->ARM_ORIG_r0 = args[0];
+		args++;
+		i++;
+		n--;
+	}
+
+	memcpy(&regs->ARM_r0 + i, args, n * sizeof(args[0]));
+}
+
+#endif /* _ASM_ARM_SYSCALL_H */

arch/arm/include/asm/thread_info.h

@@ -153,6 +153,7 @@ extern int vfp_restore_user_hwstate(struct user_vfp __user *,
 #define TIF_MEMDIE		18	/* is terminating due to OOM killer */
 #define TIF_RESTORE_SIGMASK	20
 #define TIF_SECCOMP		21
+#define TIF_SWITCH_MM		22	/* deferred switch_mm */
 
 #define _TIF_SIGPENDING		(1 << TIF_SIGPENDING)
 #define _TIF_NEED_RESCHED	(1 << TIF_NEED_RESCHED)

arch/arm/include/asm/tlbflush.h

@@ -65,21 +65,6 @@
 #define MULTI_TLB 1
 #endif
 
-#define v3_tlb_flags	(TLB_V3_FULL | TLB_V3_PAGE)
-
-#ifdef CONFIG_CPU_TLB_V3
-# define v3_possible_flags	v3_tlb_flags
-# define v3_always_flags	v3_tlb_flags
-# ifdef _TLB
-#  define MULTI_TLB 1
-# else
-#  define _TLB v3
-# endif
-#else
-# define v3_possible_flags	0
-# define v3_always_flags	(-1UL)
-#endif
-
 #define v4_tlb_flags	(TLB_V4_U_FULL | TLB_V4_U_PAGE)
 
 #ifdef CONFIG_CPU_TLB_V4WT
@@ -298,8 +283,7 @@ extern struct cpu_tlb_fns cpu_tlb;
  * implemented the "%?" method, but this has been discontinued due to too
  * many people getting it wrong.
  */
-#define possible_tlb_flags	(v3_possible_flags | \
-				 v4_possible_flags | \
+#define possible_tlb_flags	(v4_possible_flags | \
 				 v4wbi_possible_flags | \
 				 fr_possible_flags | \
 				 v4wb_possible_flags | \
@@ -307,8 +291,7 @@ extern struct cpu_tlb_fns cpu_tlb;
 				 v6wbi_possible_flags | \
 				 v7wbi_possible_flags)
 
-#define always_tlb_flags	(v3_always_flags & \
-				 v4_always_flags & \
+#define always_tlb_flags	(v4_always_flags & \
 				 v4wbi_always_flags & \
 				 fr_always_flags & \
 				 v4wb_always_flags & \

arch/arm/kernel/Makefile

@@ -34,6 +34,7 @@ obj-$(CONFIG_ARM_CPU_SUSPEND)	+= sleep.o suspend.o
 obj-$(CONFIG_SMP)		+= smp.o smp_tlb.o
 obj-$(CONFIG_HAVE_ARM_SCU)	+= smp_scu.o
 obj-$(CONFIG_HAVE_ARM_TWD)	+= smp_twd.o
+obj-$(CONFIG_ARM_ARCH_TIMER)	+= arch_timer.o
 obj-$(CONFIG_DYNAMIC_FTRACE)	+= ftrace.o insn.o
 obj-$(CONFIG_FUNCTION_GRAPH_TRACER)	+= ftrace.o insn.o
 obj-$(CONFIG_JUMP_LABEL)	+= jump_label.o insn.o patch.o

arch/arm/kernel/arch_timer.c

@@ -0,0 +1,350 @@
+/*
+ *  linux/arch/arm/kernel/arch_timer.c
+ *
+ *  Copyright (C) 2011 ARM Ltd.
+ *  All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/smp.h>
+#include <linux/cpu.h>
+#include <linux/jiffies.h>
+#include <linux/clockchips.h>
+#include <linux/interrupt.h>
+#include <linux/of_irq.h>
+#include <linux/io.h>
+
+#include <asm/cputype.h>
+#include <asm/localtimer.h>
+#include <asm/arch_timer.h>
+#include <asm/system_info.h>
+#include <asm/sched_clock.h>
+
+static unsigned long arch_timer_rate;
+static int arch_timer_ppi;
+static int arch_timer_ppi2;
+
+static struct clock_event_device __percpu **arch_timer_evt;
+
+/*
+ * Architected system timer support.
+ */
+
+#define ARCH_TIMER_CTRL_ENABLE		(1 << 0)
+#define ARCH_TIMER_CTRL_IT_MASK		(1 << 1)
+#define ARCH_TIMER_CTRL_IT_STAT		(1 << 2)
+
+#define ARCH_TIMER_REG_CTRL		0
+#define ARCH_TIMER_REG_FREQ		1
+#define ARCH_TIMER_REG_TVAL		2
+
+static void arch_timer_reg_write(int reg, u32 val)
+{
+	switch (reg) {
+	case ARCH_TIMER_REG_CTRL:
+		asm volatile("mcr p15, 0, %0, c14, c2, 1" : : "r" (val));
+		break;
+	case ARCH_TIMER_REG_TVAL:
+		asm volatile("mcr p15, 0, %0, c14, c2, 0" : : "r" (val));
+		break;
+	}
+
+	isb();
+}
+
+static u32 arch_timer_reg_read(int reg)
+{
+	u32 val;
+
+	switch (reg) {
+	case ARCH_TIMER_REG_CTRL:
+		asm volatile("mrc p15, 0, %0, c14, c2, 1" : "=r" (val));
+		break;
+	case ARCH_TIMER_REG_FREQ:
+		asm volatile("mrc p15, 0, %0, c14, c0, 0" : "=r" (val));
+		break;
+	case ARCH_TIMER_REG_TVAL:
+		asm volatile("mrc p15, 0, %0, c14, c2, 0" : "=r" (val));
+		break;
+	default:
+		BUG();
+	}
+
+	return val;
+}
+
+static irqreturn_t arch_timer_handler(int irq, void *dev_id)
+{
+	struct clock_event_device *evt = *(struct clock_event_device **)dev_id;
+	unsigned long ctrl;
+
+	ctrl = arch_timer_reg_read(ARCH_TIMER_REG_CTRL);
+	if (ctrl & ARCH_TIMER_CTRL_IT_STAT) {
+		ctrl |= ARCH_TIMER_CTRL_IT_MASK;
+		arch_timer_reg_write(ARCH_TIMER_REG_CTRL, ctrl);
+		evt->event_handler(evt);
+		return IRQ_HANDLED;
+	}
+
+	return IRQ_NONE;
+}
+
+static void arch_timer_disable(void)
+{
+	unsigned long ctrl;
+
+	ctrl = arch_timer_reg_read(ARCH_TIMER_REG_CTRL);
+	ctrl &= ~ARCH_TIMER_CTRL_ENABLE;
+	arch_timer_reg_write(ARCH_TIMER_REG_CTRL, ctrl);
+}
+
+static void arch_timer_set_mode(enum clock_event_mode mode,
+				struct clock_event_device *clk)
+{
+	switch (mode) {
+	case CLOCK_EVT_MODE_UNUSED:
+	case CLOCK_EVT_MODE_SHUTDOWN:
+		arch_timer_disable();
+		break;
+	default:
+		break;
+	}
+}
+
+static int arch_timer_set_next_event(unsigned long evt,
+				     struct clock_event_device *unused)
+{
+	unsigned long ctrl;
+
+	ctrl = arch_timer_reg_read(ARCH_TIMER_REG_CTRL);
+	ctrl |= ARCH_TIMER_CTRL_ENABLE;
+	ctrl &= ~ARCH_TIMER_CTRL_IT_MASK;
+
+	arch_timer_reg_write(ARCH_TIMER_REG_TVAL, evt);
+	arch_timer_reg_write(ARCH_TIMER_REG_CTRL, ctrl);
+
+	return 0;
+}
+
+static int __cpuinit arch_timer_setup(struct clock_event_device *clk)
+{
+	/* Be safe... */
+	arch_timer_disable();
+
+	clk->features = CLOCK_EVT_FEAT_ONESHOT;
+	clk->name = "arch_sys_timer";
+	clk->rating = 450;
+	clk->set_mode = arch_timer_set_mode;
+	clk->set_next_event = arch_timer_set_next_event;
+	clk->irq = arch_timer_ppi;
+
+	clockevents_config_and_register(clk, arch_timer_rate,
+					0xf, 0x7fffffff);
+
+	*__this_cpu_ptr(arch_timer_evt) = clk;
+
+	enable_percpu_irq(clk->irq, 0);
+	if (arch_timer_ppi2)
+		enable_percpu_irq(arch_timer_ppi2, 0);
+
+	return 0;
+}
+
+/* Is the optional system timer available? */
+static int local_timer_is_architected(void)
+{
+	return (cpu_architecture() >= CPU_ARCH_ARMv7) &&
+	       ((read_cpuid_ext(CPUID_EXT_PFR1) >> 16) & 0xf) == 1;
+}
+
+static int arch_timer_available(void)
+{
+	unsigned long freq;
+
+	if (!local_timer_is_architected())
+		return -ENXIO;
+
+	if (arch_timer_rate == 0) {
+		arch_timer_reg_write(ARCH_TIMER_REG_CTRL, 0);
+		freq = arch_timer_reg_read(ARCH_TIMER_REG_FREQ);
+
+		/* Check the timer frequency. */
+		if (freq == 0) {
+			pr_warn("Architected timer frequency not available\n");
+			return -EINVAL;
+		}
+
+		arch_timer_rate = freq;
+	}
+
+	pr_info_once("Architected local timer running at %lu.%02luMHz.\n",
+		     arch_timer_rate / 1000000, (arch_timer_rate / 10000) % 100);
+	return 0;
+}
+
+static inline cycle_t arch_counter_get_cntpct(void)
+{
+	u32 cvall, cvalh;
+
+	asm volatile("mrrc p15, 0, %0, %1, c14" : "=r" (cvall), "=r" (cvalh));
+
+	return ((cycle_t) cvalh << 32) | cvall;
+}
+
+static inline cycle_t arch_counter_get_cntvct(void)
+{
+	u32 cvall, cvalh;
+
+	asm volatile("mrrc p15, 1, %0, %1, c14" : "=r" (cvall), "=r" (cvalh));
+
+	return ((cycle_t) cvalh << 32) | cvall;
+}
+
+static u32 notrace arch_counter_get_cntvct32(void)
+{
+	cycle_t cntvct = arch_counter_get_cntvct();
+
+	/*
+	 * The sched_clock infrastructure only knows about counters
+	 * with at most 32bits. Forget about the upper 24 bits for the
+	 * time being...
+	 */
+	return (u32)(cntvct & (u32)~0);
+}
+
+static cycle_t arch_counter_read(struct clocksource *cs)
+{
+	return arch_counter_get_cntpct();
+}
+
+static struct clocksource clocksource_counter = {
+	.name	= "arch_sys_counter",
+	.rating	= 400,
+	.read	= arch_counter_read,
+	.mask	= CLOCKSOURCE_MASK(56),
+	.flags	= CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static void __cpuinit arch_timer_stop(struct clock_event_device *clk)
+{
+	pr_debug("arch_timer_teardown disable IRQ%d cpu #%d\n",
+		 clk->irq, smp_processor_id());
+	disable_percpu_irq(clk->irq);
+	if (arch_timer_ppi2)
+		disable_percpu_irq(arch_timer_ppi2);
+	arch_timer_set_mode(CLOCK_EVT_MODE_UNUSED, clk);
+}
+
+static struct local_timer_ops arch_timer_ops __cpuinitdata = {
+	.setup	= arch_timer_setup,
+	.stop	= arch_timer_stop,
+};
+
+static struct clock_event_device arch_timer_global_evt;
+
+static int __init arch_timer_register(void)
+{
+	int err;
+
+	err = arch_timer_available();
+	if (err)
+		return err;
+
+	arch_timer_evt = alloc_percpu(struct clock_event_device *);
+	if (!arch_timer_evt)
+		return -ENOMEM;
+
+	clocksource_register_hz(&clocksource_counter, arch_timer_rate);
+
+	err = request_percpu_irq(arch_timer_ppi, arch_timer_handler,
+				 "arch_timer", arch_timer_evt);
+	if (err) {
+		pr_err("arch_timer: can't register interrupt %d (%d)\n",
+		       arch_timer_ppi, err);
+		goto out_free;
+	}
+
+	if (arch_timer_ppi2) {
+		err = request_percpu_irq(arch_timer_ppi2, arch_timer_handler,
+					 "arch_timer", arch_timer_evt);
+		if (err) {
+			pr_err("arch_timer: can't register interrupt %d (%d)\n",
+			       arch_timer_ppi2, err);
+			arch_timer_ppi2 = 0;
+			goto out_free_irq;
+		}
+	}
+
+	err = local_timer_register(&arch_timer_ops);
+	if (err) {
+		/*
+		 * We couldn't register as a local timer (could be
+		 * because we're on a UP platform, or because some
+		 * other local timer is already present...). Try as a
+		 * global timer instead.
+		 */
+		arch_timer_global_evt.cpumask = cpumask_of(0);
+		err = arch_timer_setup(&arch_timer_global_evt);
+	}
+
+	if (err)
+		goto out_free_irq;
+
+	return 0;
+
+out_free_irq:
+	free_percpu_irq(arch_timer_ppi, arch_timer_evt);
+	if (arch_timer_ppi2)
+		free_percpu_irq(arch_timer_ppi2, arch_timer_evt);
+
+out_free:
+	free_percpu(arch_timer_evt);
+
+	return err;
+}
+
+static const struct of_device_id arch_timer_of_match[] __initconst = {
+	{ .compatible	= "arm,armv7-timer",	},
+	{},
+};
+
+int __init arch_timer_of_register(void)
+{
+	struct device_node *np;
+	u32 freq;
+
+	np = of_find_matching_node(NULL, arch_timer_of_match);
+	if (!np) {
+		pr_err("arch_timer: can't find DT node\n");
+		return -ENODEV;
+	}
+
+	/* Try to determine the frequency from the device tree or CNTFRQ */
+	if (!of_property_read_u32(np, "clock-frequency", &freq))
+		arch_timer_rate = freq;
+
+	arch_timer_ppi = irq_of_parse_and_map(np, 0);
+	arch_timer_ppi2 = irq_of_parse_and_map(np, 1);
+	pr_info("arch_timer: found %s irqs %d %d\n",
+		np->name, arch_timer_ppi, arch_timer_ppi2);
+
+	return arch_timer_register();
+}
+
+int __init arch_timer_sched_clock_init(void)
+{
+	int err;
+
+	err = arch_timer_available();
+	if (err)
+		return err;
+
+	setup_sched_clock(arch_counter_get_cntvct32, 32, arch_timer_rate);
+	return 0;
+}

arch/arm/kernel/bios32.c

@@ -374,16 +374,29 @@ EXPORT_SYMBOL(pcibios_fixup_bus);
 #endif
 
 /*
- * Swizzle the device pin each time we cross a bridge.
- * This might update pin and returns the slot number.
+ * Swizzle the device pin each time we cross a bridge.  If a platform does
+ * not provide a swizzle function, we perform the standard PCI swizzling.
+ *
+ * The default swizzling walks up the bus tree one level at a time, applying
+ * the standard swizzle function at each step, stopping when it finds the PCI
+ * root bus.  This will return the slot number of the bridge device on the
+ * root bus and the interrupt pin on that device which should correspond
+ * with the downstream device interrupt.
+ *
+ * Platforms may override this, in which case the slot and pin returned
+ * depend entirely on the platform code.  However, please note that the
+ * PCI standard swizzle is implemented on plug-in cards and Cardbus based
+ * PCI extenders, so it can not be ignored.
  */
 static u8 __devinit pcibios_swizzle(struct pci_dev *dev, u8 *pin)
 {
 	struct pci_sys_data *sys = dev->sysdata;
-	int slot = 0, oldpin = *pin;
+	int slot, oldpin = *pin;
 
 	if (sys->swizzle)
 		slot = sys->swizzle(dev, pin);
+	else
+		slot = pci_common_swizzle(dev, pin);
 
 	if (debug_pci)
 		printk("PCI: %s swizzling pin %d => pin %d slot %d\n",
@@ -410,7 +423,7 @@ static int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 	return irq;
 }
 
-static void __init pcibios_init_hw(struct hw_pci *hw)
+static void __init pcibios_init_hw(struct hw_pci *hw, struct list_head *head)
 {
 	struct pci_sys_data *sys = NULL;
 	int ret;
@@ -424,7 +437,6 @@ static void __init pcibios_init_hw(struct hw_pci *hw)
 #ifdef CONFIG_PCI_DOMAINS
 		sys->domain  = hw->domain;
 #endif
-		sys->hw      = hw;
 		sys->busnr   = busnr;
 		sys->swizzle = hw->swizzle;
 		sys->map_irq = hw->map_irq;
@@ -440,14 +452,18 @@ static void __init pcibios_init_hw(struct hw_pci *hw)
 					 &iomem_resource, sys->mem_offset);
 			}
 
-			sys->bus = hw->scan(nr, sys);
+			if (hw->scan)
+				sys->bus = hw->scan(nr, sys);
+			else
+				sys->bus = pci_scan_root_bus(NULL, sys->busnr,
+						hw->ops, sys, &sys->resources);
 
 			if (!sys->bus)
 				panic("PCI: unable to scan bus!");
 
 			busnr = sys->bus->subordinate + 1;
 
-			list_add(&sys->node, &hw->buses);
+			list_add(&sys->node, head);
 		} else {
 			kfree(sys);
 			if (ret < 0)
@@ -459,19 +475,18 @@ static void __init pcibios_init_hw(struct hw_pci *hw)
 void __init pci_common_init(struct hw_pci *hw)
 {
 	struct pci_sys_data *sys;
-
-	INIT_LIST_HEAD(&hw->buses);
+	LIST_HEAD(head);
 
 	pci_add_flags(PCI_REASSIGN_ALL_RSRC);
 	if (hw->preinit)
 		hw->preinit();
-	pcibios_init_hw(hw);
+	pcibios_init_hw(hw, &head);
 	if (hw->postinit)
 		hw->postinit();
 
 	pci_fixup_irqs(pcibios_swizzle, pcibios_map_irq);
 
-	list_for_each_entry(sys, &hw->buses, node) {
+	list_for_each_entry(sys, &head, node) {
 		struct pci_bus *bus = sys->bus;
 
 		if (!pci_has_flag(PCI_PROBE_ONLY)) {

arch/arm/kernel/entry-armv.S

@@ -556,10 +556,6 @@ call_fpe:
 #endif
 	tst	r0, #0x08000000			@ only CDP/CPRT/LDC/STC have bit 27
 	tstne	r0, #0x04000000			@ bit 26 set on both ARM and Thumb-2
-#if defined(CONFIG_CPU_ARM610) || defined(CONFIG_CPU_ARM710)
-	and	r8, r0, #0x0f000000		@ mask out op-code bits
-	teqne	r8, #0x0f000000			@ SWI (ARM6/7 bug)?
-#endif
 	moveq	pc, lr
 	get_thread_info r10			@ get current thread
 	and	r8, r0, #0x00000f00		@ mask out CP number

arch/arm/kernel/entry-common.S

@@ -335,20 +335,6 @@ ENDPROC(ftrace_stub)
  *-----------------------------------------------------------------------------
  */
 
-	/* If we're optimising for StrongARM the resulting code won't 
-	   run on an ARM7 and we can save a couple of instructions.  
-								--pb */
-#ifdef CONFIG_CPU_ARM710
-#define A710(code...) code
-.Larm710bug:
-	ldmia	sp, {r0 - lr}^			@ Get calling r0 - lr
-	mov	r0, r0
-	add	sp, sp, #S_FRAME_SIZE
-	subs	pc, lr, #4
-#else
-#define A710(code...)
-#endif
-
 	.align	5
 ENTRY(vector_swi)
 	sub	sp, sp, #S_FRAME_SIZE
@@ -379,9 +365,6 @@ ENTRY(vector_swi)
 	ldreq	r10, [lr, #-4]			@ get SWI instruction
 #else
 	ldr	r10, [lr, #-4]			@ get SWI instruction
-  A710(	and	ip, r10, #0x0f000000		@ check for SWI		)
-  A710(	teq	ip, #0x0f000000						)
-  A710(	bne	.Larm710bug						)
 #endif
 #ifdef CONFIG_CPU_ENDIAN_BE8
 	rev	r10, r10			@ little endian instruction
@@ -392,26 +375,15 @@ ENTRY(vector_swi)
 	/*
 	 * Pure EABI user space always put syscall number into scno (r7).
 	 */
-  A710(	ldr	ip, [lr, #-4]			@ get SWI instruction	)
-  A710(	and	ip, ip, #0x0f000000		@ check for SWI		)
-  A710(	teq	ip, #0x0f000000						)
-  A710(	bne	.Larm710bug						)
-
 #elif defined(CONFIG_ARM_THUMB)
-
 	/* Legacy ABI only, possibly thumb mode. */
 	tst	r8, #PSR_T_BIT			@ this is SPSR from save_user_regs
 	addne	scno, r7, #__NR_SYSCALL_BASE	@ put OS number in
 	ldreq	scno, [lr, #-4]
 
 #else
-
 	/* Legacy ABI only. */
 	ldr	scno, [lr, #-4]			@ get SWI instruction
-  A710(	and	ip, scno, #0x0f000000		@ check for SWI		)
-  A710(	teq	ip, #0x0f000000						)
-  A710(	bne	.Larm710bug						)
-
 #endif
 
 #ifdef CONFIG_ALIGNMENT_TRAP

arch/arm/kernel/head.S

@@ -277,10 +277,6 @@ __create_page_tables:
 	mov	r3, r3, lsl #PMD_ORDER
 
 	add	r0, r4, r3
-	rsb	r3, r3, #0x4000			@ PTRS_PER_PGD*sizeof(long)
-	cmp	r3, #0x0800			@ limit to 512MB
-	movhi	r3, #0x0800
-	add	r6, r0, r3
 	mov	r3, r7, lsr #SECTION_SHIFT
 	ldr	r7, [r10, #PROCINFO_IO_MMUFLAGS] @ io_mmuflags
 	orr	r3, r7, r3, lsl #SECTION_SHIFT
@@ -289,13 +285,10 @@ __create_page_tables:
 #else
 	orr	r3, r3, #PMD_SECT_XN
 #endif
-1:	str	r3, [r0], #4
+	str	r3, [r0], #4
 #ifdef CONFIG_ARM_LPAE
 	str	r7, [r0], #4
 #endif
-	add	r3, r3, #1 << SECTION_SHIFT
-	cmp	r0, r6
-	blo	1b
 
 #else /* CONFIG_DEBUG_ICEDCC || CONFIG_DEBUG_SEMIHOSTING */
 	/* we don't need any serial debugging mappings */

arch/arm/kernel/ptrace.c

@@ -24,6 +24,7 @@
 #include <linux/hw_breakpoint.h>
 #include <linux/regset.h>
 #include <linux/audit.h>
+#include <linux/tracehook.h>
 
 #include <asm/pgtable.h>
 #include <asm/traps.h>
@@ -918,8 +919,6 @@ asmlinkage int syscall_trace(int why, struct pt_regs *regs, int scno)
 
 	if (!test_thread_flag(TIF_SYSCALL_TRACE))
 		return scno;
-	if (!(current->ptrace & PT_PTRACED))
-		return scno;
 
 	current_thread_info()->syscall = scno;
 
@@ -930,19 +929,11 @@ asmlinkage int syscall_trace(int why, struct pt_regs *regs, int scno)
 	ip = regs->ARM_ip;
 	regs->ARM_ip = why;
 
-	/* the 0x80 provides a way for the tracing parent to distinguish
-	   between a syscall stop and SIGTRAP delivery */
-	ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD)
-				 ? 0x80 : 0));
-	/*
-	 * this isn't the same as continuing with a signal, but it will do
-	 * for normal use.  strace only continues with a signal if the
-	 * stopping signal is not SIGTRAP.  -brl
-	 */
-	if (current->exit_code) {
-		send_sig(current->exit_code, current, 1);
-		current->exit_code = 0;
-	}
+	if (why)
+		tracehook_report_syscall_exit(regs, 0);
+	else if (tracehook_report_syscall_entry(regs))
+		current_thread_info()->syscall = -1;
+
 	regs->ARM_ip = ip;
 
 	return current_thread_info()->syscall;

arch/arm/kernel/signal.c

@@ -589,6 +589,8 @@ handle_signal(unsigned long sig, struct k_sigaction *ka,
 	 */
 	block_sigmask(ka, sig);
 
+	tracehook_signal_handler(sig, info, ka, regs, 0);
+
 	return 0;
 }
 

arch/arm/kernel/smp.c

@@ -454,6 +454,9 @@ static struct local_timer_ops *lt_ops;
 #ifdef CONFIG_LOCAL_TIMERS
 int local_timer_register(struct local_timer_ops *ops)
 {
+	if (!is_smp() || !setup_max_cpus)
+		return -ENXIO;
+
 	if (lt_ops)
 		return -EBUSY;
 

arch/arm/kernel/smp_scu.c

@@ -11,6 +11,7 @@
 #include <linux/init.h>
 #include <linux/io.h>
 
+#include <asm/smp_plat.h>
 #include <asm/smp_scu.h>
 #include <asm/cacheflush.h>
 #include <asm/cputype.h>
@@ -74,7 +75,7 @@ void scu_enable(void __iomem *scu_base)
 int scu_power_mode(void __iomem *scu_base, unsigned int mode)
 {
 	unsigned int val;
-	int cpu = smp_processor_id();
+	int cpu = cpu_logical_map(smp_processor_id());
 
 	if (mode > 3 || mode == 1 || cpu > 3)
 		return -EINVAL;

arch/arm/kernel/thumbee.c

@@ -20,6 +20,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 
+#include <asm/cputype.h>
 #include <asm/system_info.h>
 #include <asm/thread_notify.h>
 
@@ -67,8 +68,7 @@ static int __init thumbee_init(void)
 	if (cpu_arch < CPU_ARCH_ARMv7)
 		return 0;
 
-	/* processor feature register 0 */
-	asm("mrc	p15, 0, %0, c0, c1, 0\n" : "=r" (pfr0));
+	pfr0 = read_cpuid_ext(CPUID_EXT_PFR0);
 	if ((pfr0 & 0x0000f000) != 0x00001000)
 		return 0;
 

arch/arm/kernel/time.c

@@ -110,6 +110,42 @@ void timer_tick(void)
 }
 #endif
 
+static void dummy_clock_access(struct timespec *ts)
+{
+	ts->tv_sec = 0;
+	ts->tv_nsec = 0;
+}
+
+static clock_access_fn __read_persistent_clock = dummy_clock_access;
+static clock_access_fn __read_boot_clock = dummy_clock_access;;
+
+void read_persistent_clock(struct timespec *ts)
+{
+	__read_persistent_clock(ts);
+}
+
+void read_boot_clock(struct timespec *ts)
+{
+	__read_boot_clock(ts);
+}
+
+int __init register_persistent_clock(clock_access_fn read_boot,
+				     clock_access_fn read_persistent)
+{
+	/* Only allow the clockaccess functions to be registered once */
+	if (__read_persistent_clock == dummy_clock_access &&
+	    __read_boot_clock == dummy_clock_access) {
+		if (read_boot)
+			__read_boot_clock = read_boot;
+		if (read_persistent)
+			__read_persistent_clock = read_persistent;
+
+		return 0;
+	}
+
+	return -EINVAL;
+}
+
 #if defined(CONFIG_PM) && !defined(CONFIG_GENERIC_CLOCKEVENTS)
 static int timer_suspend(void)
 {

arch/arm/kernel/traps.c

@@ -479,14 +479,14 @@ static int bad_syscall(int n, struct pt_regs *regs)
 	return regs->ARM_r0;
 }
 
-static inline void
+static inline int
 do_cache_op(unsigned long start, unsigned long end, int flags)
 {
 	struct mm_struct *mm = current->active_mm;
 	struct vm_area_struct *vma;
 
 	if (end < start || flags)
-		return;
+		return -EINVAL;
 
 	down_read(&mm->mmap_sem);
 	vma = find_vma(mm, start);
@@ -496,9 +496,11 @@ do_cache_op(unsigned long start, unsigned long end, int flags)
 		if (end > vma->vm_end)
 			end = vma->vm_end;
 
-		flush_cache_user_range(vma, start, end);
+		up_read(&mm->mmap_sem);
+		return flush_cache_user_range(start, end);
 	}
 	up_read(&mm->mmap_sem);
+	return -EINVAL;
 }
 
 /*
@@ -544,8 +546,7 @@ asmlinkage int arm_syscall(int no, struct pt_regs *regs)
 	 * the specified region).
 	 */
 	case NR(cacheflush):
-		do_cache_op(regs->ARM_r0, regs->ARM_r1, regs->ARM_r2);
-		return 0;
+		return do_cache_op(regs->ARM_r0, regs->ARM_r1, regs->ARM_r2);
 
 	case NR(usr26):
 		if (!(elf_hwcap & HWCAP_26BIT))

arch/arm/lib/Makefile

@@ -17,30 +17,13 @@ lib-y		:= backtrace.o changebit.o csumipv6.o csumpartial.o   \
 		   call_with_stack.o
 
 mmu-y	:= clear_user.o copy_page.o getuser.o putuser.o
-
-# the code in uaccess.S is not preemption safe and
-# probably faster on ARMv3 only
-ifeq ($(CONFIG_PREEMPT),y)
-  mmu-y	+= copy_from_user.o copy_to_user.o
-else
-ifneq ($(CONFIG_CPU_32v3),y)
-  mmu-y	+= copy_from_user.o copy_to_user.o
-else
-  mmu-y	+= uaccess.o
-endif
-endif
+mmu-y	+= copy_from_user.o copy_to_user.o
 
 # using lib_ here won't override already available weak symbols
 obj-$(CONFIG_UACCESS_WITH_MEMCPY) += uaccess_with_memcpy.o
 
-lib-$(CONFIG_MMU) += $(mmu-y)
-
-ifeq ($(CONFIG_CPU_32v3),y)
-  lib-y	+= io-readsw-armv3.o io-writesw-armv3.o
-else
-  lib-y	+= io-readsw-armv4.o io-writesw-armv4.o
-endif
-
+lib-$(CONFIG_MMU)		+= $(mmu-y)
+lib-y				+= io-readsw-armv4.o io-writesw-armv4.o
 lib-$(CONFIG_ARCH_RPC)		+= ecard.o io-acorn.o floppydma.o
 lib-$(CONFIG_ARCH_SHARK)	+= io-shark.o
 

arch/arm/lib/io-readsw-armv3.S

@@ -1,106 +0,0 @@
-/*
- *  linux/arch/arm/lib/io-readsw-armv3.S
- *
- *  Copyright (C) 1995-2000 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-
-.Linsw_bad_alignment:
-		adr	r0, .Linsw_bad_align_msg
-		mov	r2, lr
-		b	panic
-.Linsw_bad_align_msg:
-		.asciz	"insw: bad buffer alignment (0x%p, lr=0x%08lX)\n"
-		.align
-
-.Linsw_align:	tst	r1, #1
-		bne	.Linsw_bad_alignment
-
-		ldr	r3, [r0]
-		strb	r3, [r1], #1
-		mov	r3, r3, lsr #8
-		strb	r3, [r1], #1
-
-		subs	r2, r2, #1
-		moveq	pc, lr
-
-ENTRY(__raw_readsw)
-		teq	r2, #0		@ do we have to check for the zero len?
-		moveq	pc, lr
-		tst	r1, #3
-		bne	.Linsw_align
-
-.Linsw_aligned:	mov	ip, #0xff
-		orr	ip, ip, ip, lsl #8
-		stmfd	sp!, {r4, r5, r6, lr}
-
-		subs	r2, r2, #8
-		bmi	.Lno_insw_8
-
-.Linsw_8_lp:	ldr	r3, [r0]
-		and	r3, r3, ip
-		ldr	r4, [r0]
-		orr	r3, r3, r4, lsl #16
-
-		ldr	r4, [r0]
-		and	r4, r4, ip
-		ldr	r5, [r0]
-		orr	r4, r4, r5, lsl #16
-
-		ldr	r5, [r0]
-		and	r5, r5, ip
-		ldr	r6, [r0]
-		orr	r5, r5, r6, lsl #16
-
-		ldr	r6, [r0]
-		and	r6, r6, ip
-		ldr	lr, [r0]
-		orr	r6, r6, lr, lsl #16
-
-		stmia	r1!, {r3 - r6}
-
-		subs	r2, r2, #8
-		bpl	.Linsw_8_lp
-
-		tst	r2, #7
-		ldmeqfd	sp!, {r4, r5, r6, pc}
-
-.Lno_insw_8:	tst	r2, #4
-		beq	.Lno_insw_4
-
-		ldr	r3, [r0]
-		and	r3, r3, ip
-		ldr	r4, [r0]
-		orr	r3, r3, r4, lsl #16
-
-		ldr	r4, [r0]
-		and	r4, r4, ip
-		ldr	r5, [r0]
-		orr	r4, r4, r5, lsl #16
-
-		stmia	r1!, {r3, r4}
-
-.Lno_insw_4:	tst	r2, #2
-		beq	.Lno_insw_2
-
-		ldr	r3, [r0]
-		and	r3, r3, ip
-		ldr	r4, [r0]
-		orr	r3, r3, r4, lsl #16
-
-		str	r3, [r1], #4
-
-.Lno_insw_2:	tst	r2, #1
-		ldrne	r3, [r0]
-		strneb	r3, [r1], #1
-		movne	r3, r3, lsr #8
-		strneb	r3, [r1]
-
-		ldmfd	sp!, {r4, r5, r6, pc}
-
-

arch/arm/lib/io-writesw-armv3.S

@@ -1,126 +0,0 @@
-/*
- *  linux/arch/arm/lib/io-writesw-armv3.S
- *
- *  Copyright (C) 1995-2000 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-
-.Loutsw_bad_alignment:
-		adr	r0, .Loutsw_bad_align_msg
-		mov	r2, lr
-		b	panic
-.Loutsw_bad_align_msg:
-		.asciz	"outsw: bad buffer alignment (0x%p, lr=0x%08lX)\n"
-		.align
-
-.Loutsw_align:	tst	r1, #1
-		bne	.Loutsw_bad_alignment
-
-		add	r1, r1, #2
-
-		ldr	r3, [r1, #-4]
-		mov	r3, r3, lsr #16
-		orr	r3, r3, r3, lsl #16
-		str	r3, [r0]
-		subs	r2, r2, #1
-		moveq	pc, lr
-
-ENTRY(__raw_writesw)
-		teq	r2, #0		@ do we have to check for the zero len?
-		moveq	pc, lr
-		tst	r1, #3
-		bne	.Loutsw_align
-
-		stmfd	sp!, {r4, r5, r6, lr}
-
-		subs	r2, r2, #8
-		bmi	.Lno_outsw_8
-
-.Loutsw_8_lp:	ldmia	r1!, {r3, r4, r5, r6}
-
-		mov	ip, r3, lsl #16
-		orr	ip, ip, ip, lsr #16
-		str	ip, [r0]
-
-		mov	ip, r3, lsr #16
-		orr	ip, ip, ip, lsl #16
-		str	ip, [r0]
-
-		mov	ip, r4, lsl #16
-		orr	ip, ip, ip, lsr #16
-		str	ip, [r0]
-
-		mov	ip, r4, lsr #16
-		orr	ip, ip, ip, lsl #16
-		str	ip, [r0]
-
-		mov	ip, r5, lsl #16
-		orr	ip, ip, ip, lsr #16
-		str	ip, [r0]
-
-		mov	ip, r5, lsr #16
-		orr	ip, ip, ip, lsl #16
-		str	ip, [r0]
-
-		mov	ip, r6, lsl #16
-		orr	ip, ip, ip, lsr #16
-		str	ip, [r0]
-
-		mov	ip, r6, lsr #16
-		orr	ip, ip, ip, lsl #16
-		str	ip, [r0]
-
-		subs	r2, r2, #8
-		bpl	.Loutsw_8_lp
-
-		tst	r2, #7
-		ldmeqfd	sp!, {r4, r5, r6, pc}
-
-.Lno_outsw_8:	tst	r2, #4
-		beq	.Lno_outsw_4
-
-		ldmia	r1!, {r3, r4}
-
-		mov	ip, r3, lsl #16
-		orr	ip, ip, ip, lsr #16
-		str	ip, [r0]
-
-		mov	ip, r3, lsr #16
-		orr	ip, ip, ip, lsl #16
-		str	ip, [r0]
-
-		mov	ip, r4, lsl #16
-		orr	ip, ip, ip, lsr #16
-		str	ip, [r0]
-
-		mov	ip, r4, lsr #16
-		orr	ip, ip, ip, lsl #16
-		str	ip, [r0]
-
-.Lno_outsw_4:	tst	r2, #2
-		beq	.Lno_outsw_2
-
-		ldr	r3, [r1], #4
-
-		mov	ip, r3, lsl #16
-		orr	ip, ip, ip, lsr #16
-		str	ip, [r0]
-
-		mov	ip, r3, lsr #16
-		orr	ip, ip, ip, lsl #16
-		str	ip, [r0]
-
-.Lno_outsw_2:	tst	r2, #1
-
-		ldrne	r3, [r1]
-
-		movne	ip, r3, lsl #16
-		orrne	ip, ip, ip, lsr #16
-		strne	ip, [r0]
-
-		ldmfd	sp!, {r4, r5, r6, pc}

arch/arm/lib/uaccess.S

@@ -1,564 +0,0 @@
-/*
- *  linux/arch/arm/lib/uaccess.S
- *
- *  Copyright (C) 1995, 1996,1997,1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Routines to block copy data to/from user memory
- *   These are highly optimised both for the 4k page size
- *   and for various alignments.
- */
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-#include <asm/errno.h>
-#include <asm/domain.h>
-
-		.text
-
-#define PAGE_SHIFT 12
-
-/* Prototype: int __copy_to_user(void *to, const char *from, size_t n)
- * Purpose  : copy a block to user memory from kernel memory
- * Params   : to   - user memory
- *          : from - kernel memory
- *          : n    - number of bytes to copy
- * Returns  : Number of bytes NOT copied.
- */
-
-.Lc2u_dest_not_aligned:
-		rsb	ip, ip, #4
-		cmp	ip, #2
-		ldrb	r3, [r1], #1
-USER(	TUSER(	strb)	r3, [r0], #1)			@ May fault
-		ldrgeb	r3, [r1], #1
-USER(	TUSER(	strgeb) r3, [r0], #1)			@ May fault
-		ldrgtb	r3, [r1], #1
-USER(	TUSER(	strgtb) r3, [r0], #1)			@ May fault
-		sub	r2, r2, ip
-		b	.Lc2u_dest_aligned
-
-ENTRY(__copy_to_user)
-		stmfd	sp!, {r2, r4 - r7, lr}
-		cmp	r2, #4
-		blt	.Lc2u_not_enough
-		ands	ip, r0, #3
-		bne	.Lc2u_dest_not_aligned
-.Lc2u_dest_aligned:
-
-		ands	ip, r1, #3
-		bne	.Lc2u_src_not_aligned
-/*
- * Seeing as there has to be at least 8 bytes to copy, we can
- * copy one word, and force a user-mode page fault...
- */
-
-.Lc2u_0fupi:	subs	r2, r2, #4
-		addmi	ip, r2, #4
-		bmi	.Lc2u_0nowords
-		ldr	r3, [r1], #4
-USER(	TUSER(	str)	r3, [r0], #4)			@ May fault
-		mov	ip, r0, lsl #32 - PAGE_SHIFT	@ On each page, use a ld/st??t instruction
-		rsb	ip, ip, #0
-		movs	ip, ip, lsr #32 - PAGE_SHIFT
-		beq	.Lc2u_0fupi
-/*
- * ip = max no. of bytes to copy before needing another "strt" insn
- */
-		cmp	r2, ip
-		movlt	ip, r2
-		sub	r2, r2, ip
-		subs	ip, ip, #32
-		blt	.Lc2u_0rem8lp
-
-.Lc2u_0cpy8lp:	ldmia	r1!, {r3 - r6}
-		stmia	r0!, {r3 - r6}			@ Shouldnt fault
-		ldmia	r1!, {r3 - r6}
-		subs	ip, ip, #32
-		stmia	r0!, {r3 - r6}			@ Shouldnt fault
-		bpl	.Lc2u_0cpy8lp
-
-.Lc2u_0rem8lp:	cmn	ip, #16
-		ldmgeia	r1!, {r3 - r6}
-		stmgeia	r0!, {r3 - r6}			@ Shouldnt fault
-		tst	ip, #8
-		ldmneia	r1!, {r3 - r4}
-		stmneia	r0!, {r3 - r4}			@ Shouldnt fault
-		tst	ip, #4
-		ldrne	r3, [r1], #4
-	TUSER(	strne) r3, [r0], #4			@ Shouldnt fault
-		ands	ip, ip, #3
-		beq	.Lc2u_0fupi
-.Lc2u_0nowords:	teq	ip, #0
-		beq	.Lc2u_finished
-.Lc2u_nowords:	cmp	ip, #2
-		ldrb	r3, [r1], #1
-USER(	TUSER(	strb)	r3, [r0], #1)			@ May fault
-		ldrgeb	r3, [r1], #1
-USER(	TUSER(	strgeb) r3, [r0], #1)			@ May fault
-		ldrgtb	r3, [r1], #1
-USER(	TUSER(	strgtb) r3, [r0], #1)			@ May fault
-		b	.Lc2u_finished
-
-.Lc2u_not_enough:
-		movs	ip, r2
-		bne	.Lc2u_nowords
-.Lc2u_finished:	mov	r0, #0
-		ldmfd	sp!, {r2, r4 - r7, pc}
-
-.Lc2u_src_not_aligned:
-		bic	r1, r1, #3
-		ldr	r7, [r1], #4
-		cmp	ip, #2
-		bgt	.Lc2u_3fupi
-		beq	.Lc2u_2fupi
-.Lc2u_1fupi:	subs	r2, r2, #4
-		addmi	ip, r2, #4
-		bmi	.Lc2u_1nowords
-		mov	r3, r7, pull #8
-		ldr	r7, [r1], #4
-		orr	r3, r3, r7, push #24
-USER(	TUSER(	str)	r3, [r0], #4)			@ May fault
-		mov	ip, r0, lsl #32 - PAGE_SHIFT
-		rsb	ip, ip, #0
-		movs	ip, ip, lsr #32 - PAGE_SHIFT
-		beq	.Lc2u_1fupi
-		cmp	r2, ip
-		movlt	ip, r2
-		sub	r2, r2, ip
-		subs	ip, ip, #16
-		blt	.Lc2u_1rem8lp
-
-.Lc2u_1cpy8lp:	mov	r3, r7, pull #8
-		ldmia	r1!, {r4 - r7}
-		subs	ip, ip, #16
-		orr	r3, r3, r4, push #24
-		mov	r4, r4, pull #8
-		orr	r4, r4, r5, push #24
-		mov	r5, r5, pull #8
-		orr	r5, r5, r6, push #24
-		mov	r6, r6, pull #8
-		orr	r6, r6, r7, push #24
-		stmia	r0!, {r3 - r6}			@ Shouldnt fault
-		bpl	.Lc2u_1cpy8lp
-
-.Lc2u_1rem8lp:	tst	ip, #8
-		movne	r3, r7, pull #8
-		ldmneia	r1!, {r4, r7}
-		orrne	r3, r3, r4, push #24
-		movne	r4, r4, pull #8
-		orrne	r4, r4, r7, push #24
-		stmneia	r0!, {r3 - r4}			@ Shouldnt fault
-		tst	ip, #4
-		movne	r3, r7, pull #8
-		ldrne	r7, [r1], #4
-		orrne	r3, r3, r7, push #24
-	TUSER(	strne) r3, [r0], #4			@ Shouldnt fault
-		ands	ip, ip, #3
-		beq	.Lc2u_1fupi
-.Lc2u_1nowords:	mov	r3, r7, get_byte_1
-		teq	ip, #0
-		beq	.Lc2u_finished
-		cmp	ip, #2
-USER(	TUSER(	strb)	r3, [r0], #1)			@ May fault
-		movge	r3, r7, get_byte_2
-USER(	TUSER(	strgeb) r3, [r0], #1)			@ May fault
-		movgt	r3, r7, get_byte_3
-USER(	TUSER(	strgtb) r3, [r0], #1)			@ May fault
-		b	.Lc2u_finished
-
-.Lc2u_2fupi:	subs	r2, r2, #4
-		addmi	ip, r2, #4
-		bmi	.Lc2u_2nowords
-		mov	r3, r7, pull #16
-		ldr	r7, [r1], #4
-		orr	r3, r3, r7, push #16
-USER(	TUSER(	str)	r3, [r0], #4)			@ May fault
-		mov	ip, r0, lsl #32 - PAGE_SHIFT
-		rsb	ip, ip, #0
-		movs	ip, ip, lsr #32 - PAGE_SHIFT
-		beq	.Lc2u_2fupi
-		cmp	r2, ip
-		movlt	ip, r2
-		sub	r2, r2, ip
-		subs	ip, ip, #16
-		blt	.Lc2u_2rem8lp
-
-.Lc2u_2cpy8lp:	mov	r3, r7, pull #16
-		ldmia	r1!, {r4 - r7}
-		subs	ip, ip, #16
-		orr	r3, r3, r4, push #16
-		mov	r4, r4, pull #16
-		orr	r4, r4, r5, push #16
-		mov	r5, r5, pull #16
-		orr	r5, r5, r6, push #16
-		mov	r6, r6, pull #16
-		orr	r6, r6, r7, push #16
-		stmia	r0!, {r3 - r6}			@ Shouldnt fault
-		bpl	.Lc2u_2cpy8lp
-
-.Lc2u_2rem8lp:	tst	ip, #8
-		movne	r3, r7, pull #16
-		ldmneia	r1!, {r4, r7}
-		orrne	r3, r3, r4, push #16
-		movne	r4, r4, pull #16
-		orrne	r4, r4, r7, push #16
-		stmneia	r0!, {r3 - r4}			@ Shouldnt fault
-		tst	ip, #4
-		movne	r3, r7, pull #16
-		ldrne	r7, [r1], #4
-		orrne	r3, r3, r7, push #16
-	TUSER(	strne) r3, [r0], #4			@ Shouldnt fault
-		ands	ip, ip, #3
-		beq	.Lc2u_2fupi
-.Lc2u_2nowords:	mov	r3, r7, get_byte_2
-		teq	ip, #0
-		beq	.Lc2u_finished
-		cmp	ip, #2
-USER(	TUSER(	strb)	r3, [r0], #1)			@ May fault
-		movge	r3, r7, get_byte_3
-USER(	TUSER(	strgeb) r3, [r0], #1)			@ May fault
-		ldrgtb	r3, [r1], #0
-USER(	TUSER(	strgtb) r3, [r0], #1)			@ May fault
-		b	.Lc2u_finished
-
-.Lc2u_3fupi:	subs	r2, r2, #4
-		addmi	ip, r2, #4
-		bmi	.Lc2u_3nowords
-		mov	r3, r7, pull #24
-		ldr	r7, [r1], #4
-		orr	r3, r3, r7, push #8
-USER(	TUSER(	str)	r3, [r0], #4)			@ May fault
-		mov	ip, r0, lsl #32 - PAGE_SHIFT
-		rsb	ip, ip, #0
-		movs	ip, ip, lsr #32 - PAGE_SHIFT
-		beq	.Lc2u_3fupi
-		cmp	r2, ip
-		movlt	ip, r2
-		sub	r2, r2, ip
-		subs	ip, ip, #16
-		blt	.Lc2u_3rem8lp
-
-.Lc2u_3cpy8lp:	mov	r3, r7, pull #24
-		ldmia	r1!, {r4 - r7}
-		subs	ip, ip, #16
-		orr	r3, r3, r4, push #8
-		mov	r4, r4, pull #24
-		orr	r4, r4, r5, push #8
-		mov	r5, r5, pull #24
-		orr	r5, r5, r6, push #8
-		mov	r6, r6, pull #24
-		orr	r6, r6, r7, push #8
-		stmia	r0!, {r3 - r6}			@ Shouldnt fault
-		bpl	.Lc2u_3cpy8lp
-
-.Lc2u_3rem8lp:	tst	ip, #8
-		movne	r3, r7, pull #24
-		ldmneia	r1!, {r4, r7}
-		orrne	r3, r3, r4, push #8
-		movne	r4, r4, pull #24
-		orrne	r4, r4, r7, push #8
-		stmneia	r0!, {r3 - r4}			@ Shouldnt fault
-		tst	ip, #4
-		movne	r3, r7, pull #24
-		ldrne	r7, [r1], #4
-		orrne	r3, r3, r7, push #8
-	TUSER(	strne) r3, [r0], #4			@ Shouldnt fault
-		ands	ip, ip, #3
-		beq	.Lc2u_3fupi
-.Lc2u_3nowords:	mov	r3, r7, get_byte_3
-		teq	ip, #0
-		beq	.Lc2u_finished
-		cmp	ip, #2
-USER(	TUSER(	strb)	r3, [r0], #1)			@ May fault
-		ldrgeb	r3, [r1], #1
-USER(	TUSER(	strgeb) r3, [r0], #1)			@ May fault
-		ldrgtb	r3, [r1], #0
-USER(	TUSER(	strgtb) r3, [r0], #1)			@ May fault
-		b	.Lc2u_finished
-ENDPROC(__copy_to_user)
-
-		.pushsection .fixup,"ax"
-		.align	0
-9001:		ldmfd	sp!, {r0, r4 - r7, pc}
-		.popsection
-
-/* Prototype: unsigned long __copy_from_user(void *to,const void *from,unsigned long n);
- * Purpose  : copy a block from user memory to kernel memory
- * Params   : to   - kernel memory
- *          : from - user memory
- *          : n    - number of bytes to copy
- * Returns  : Number of bytes NOT copied.
- */
-.Lcfu_dest_not_aligned:
-		rsb	ip, ip, #4
-		cmp	ip, #2
-USER(	TUSER(	ldrb)	r3, [r1], #1)			@ May fault
-		strb	r3, [r0], #1
-USER(	TUSER(	ldrgeb) r3, [r1], #1)			@ May fault
-		strgeb	r3, [r0], #1
-USER(	TUSER(	ldrgtb) r3, [r1], #1)			@ May fault
-		strgtb	r3, [r0], #1
-		sub	r2, r2, ip
-		b	.Lcfu_dest_aligned
-
-ENTRY(__copy_from_user)
-		stmfd	sp!, {r0, r2, r4 - r7, lr}
-		cmp	r2, #4
-		blt	.Lcfu_not_enough
-		ands	ip, r0, #3
-		bne	.Lcfu_dest_not_aligned
-.Lcfu_dest_aligned:
-		ands	ip, r1, #3
-		bne	.Lcfu_src_not_aligned
-
-/*
- * Seeing as there has to be at least 8 bytes to copy, we can
- * copy one word, and force a user-mode page fault...
- */
-
-.Lcfu_0fupi:	subs	r2, r2, #4
-		addmi	ip, r2, #4
-		bmi	.Lcfu_0nowords
-USER(	TUSER(	ldr)	r3, [r1], #4)
-		str	r3, [r0], #4
-		mov	ip, r1, lsl #32 - PAGE_SHIFT	@ On each page, use a ld/st??t instruction
-		rsb	ip, ip, #0
-		movs	ip, ip, lsr #32 - PAGE_SHIFT
-		beq	.Lcfu_0fupi
-/*
- * ip = max no. of bytes to copy before needing another "strt" insn
- */
-		cmp	r2, ip
-		movlt	ip, r2
-		sub	r2, r2, ip
-		subs	ip, ip, #32
-		blt	.Lcfu_0rem8lp
-
-.Lcfu_0cpy8lp:	ldmia	r1!, {r3 - r6}			@ Shouldnt fault
-		stmia	r0!, {r3 - r6}
-		ldmia	r1!, {r3 - r6}			@ Shouldnt fault
-		subs	ip, ip, #32
-		stmia	r0!, {r3 - r6}
-		bpl	.Lcfu_0cpy8lp
-
-.Lcfu_0rem8lp:	cmn	ip, #16
-		ldmgeia	r1!, {r3 - r6}			@ Shouldnt fault
-		stmgeia	r0!, {r3 - r6}
-		tst	ip, #8
-		ldmneia	r1!, {r3 - r4}			@ Shouldnt fault
-		stmneia	r0!, {r3 - r4}
-		tst	ip, #4
-	TUSER(	ldrne) r3, [r1], #4			@ Shouldnt fault
-		strne	r3, [r0], #4
-		ands	ip, ip, #3
-		beq	.Lcfu_0fupi
-.Lcfu_0nowords:	teq	ip, #0
-		beq	.Lcfu_finished
-.Lcfu_nowords:	cmp	ip, #2
-USER(	TUSER(	ldrb)	r3, [r1], #1)			@ May fault
-		strb	r3, [r0], #1
-USER(	TUSER(	ldrgeb) r3, [r1], #1)			@ May fault
-		strgeb	r3, [r0], #1
-USER(	TUSER(	ldrgtb) r3, [r1], #1)			@ May fault
-		strgtb	r3, [r0], #1
-		b	.Lcfu_finished
-
-.Lcfu_not_enough:
-		movs	ip, r2
-		bne	.Lcfu_nowords
-.Lcfu_finished:	mov	r0, #0
-		add	sp, sp, #8
-		ldmfd	sp!, {r4 - r7, pc}
-
-.Lcfu_src_not_aligned:
-		bic	r1, r1, #3
-USER(	TUSER(	ldr)	r7, [r1], #4)			@ May fault
-		cmp	ip, #2
-		bgt	.Lcfu_3fupi
-		beq	.Lcfu_2fupi
-.Lcfu_1fupi:	subs	r2, r2, #4
-		addmi	ip, r2, #4
-		bmi	.Lcfu_1nowords
-		mov	r3, r7, pull #8
-USER(	TUSER(	ldr)	r7, [r1], #4)			@ May fault
-		orr	r3, r3, r7, push #24
-		str	r3, [r0], #4
-		mov	ip, r1, lsl #32 - PAGE_SHIFT
-		rsb	ip, ip, #0
-		movs	ip, ip, lsr #32 - PAGE_SHIFT
-		beq	.Lcfu_1fupi
-		cmp	r2, ip
-		movlt	ip, r2
-		sub	r2, r2, ip
-		subs	ip, ip, #16
-		blt	.Lcfu_1rem8lp
-
-.Lcfu_1cpy8lp:	mov	r3, r7, pull #8
-		ldmia	r1!, {r4 - r7}			@ Shouldnt fault
-		subs	ip, ip, #16
-		orr	r3, r3, r4, push #24
-		mov	r4, r4, pull #8
-		orr	r4, r4, r5, push #24
-		mov	r5, r5, pull #8
-		orr	r5, r5, r6, push #24
-		mov	r6, r6, pull #8
-		orr	r6, r6, r7, push #24
-		stmia	r0!, {r3 - r6}
-		bpl	.Lcfu_1cpy8lp
-
-.Lcfu_1rem8lp:	tst	ip, #8
-		movne	r3, r7, pull #8
-		ldmneia	r1!, {r4, r7}			@ Shouldnt fault
-		orrne	r3, r3, r4, push #24
-		movne	r4, r4, pull #8
-		orrne	r4, r4, r7, push #24
-		stmneia	r0!, {r3 - r4}
-		tst	ip, #4
-		movne	r3, r7, pull #8
-USER(	TUSER(	ldrne) r7, [r1], #4)			@ May fault
-		orrne	r3, r3, r7, push #24
-		strne	r3, [r0], #4
-		ands	ip, ip, #3
-		beq	.Lcfu_1fupi
-.Lcfu_1nowords:	mov	r3, r7, get_byte_1
-		teq	ip, #0
-		beq	.Lcfu_finished
-		cmp	ip, #2
-		strb	r3, [r0], #1
-		movge	r3, r7, get_byte_2
-		strgeb	r3, [r0], #1
-		movgt	r3, r7, get_byte_3
-		strgtb	r3, [r0], #1
-		b	.Lcfu_finished
-
-.Lcfu_2fupi:	subs	r2, r2, #4
-		addmi	ip, r2, #4
-		bmi	.Lcfu_2nowords
-		mov	r3, r7, pull #16
-USER(	TUSER(	ldr)	r7, [r1], #4)			@ May fault
-		orr	r3, r3, r7, push #16
-		str	r3, [r0], #4
-		mov	ip, r1, lsl #32 - PAGE_SHIFT
-		rsb	ip, ip, #0
-		movs	ip, ip, lsr #32 - PAGE_SHIFT
-		beq	.Lcfu_2fupi
-		cmp	r2, ip
-		movlt	ip, r2
-		sub	r2, r2, ip
-		subs	ip, ip, #16
-		blt	.Lcfu_2rem8lp
-
-
-.Lcfu_2cpy8lp:	mov	r3, r7, pull #16
-		ldmia	r1!, {r4 - r7}			@ Shouldnt fault
-		subs	ip, ip, #16
-		orr	r3, r3, r4, push #16
-		mov	r4, r4, pull #16
-		orr	r4, r4, r5, push #16
-		mov	r5, r5, pull #16
-		orr	r5, r5, r6, push #16
-		mov	r6, r6, pull #16
-		orr	r6, r6, r7, push #16
-		stmia	r0!, {r3 - r6}
-		bpl	.Lcfu_2cpy8lp
-
-.Lcfu_2rem8lp:	tst	ip, #8
-		movne	r3, r7, pull #16
-		ldmneia	r1!, {r4, r7}			@ Shouldnt fault
-		orrne	r3, r3, r4, push #16
-		movne	r4, r4, pull #16
-		orrne	r4, r4, r7, push #16
-		stmneia	r0!, {r3 - r4}
-		tst	ip, #4
-		movne	r3, r7, pull #16
-USER(	TUSER(	ldrne) r7, [r1], #4)			@ May fault
-		orrne	r3, r3, r7, push #16
-		strne	r3, [r0], #4
-		ands	ip, ip, #3
-		beq	.Lcfu_2fupi
-.Lcfu_2nowords:	mov	r3, r7, get_byte_2
-		teq	ip, #0
-		beq	.Lcfu_finished
-		cmp	ip, #2
-		strb	r3, [r0], #1
-		movge	r3, r7, get_byte_3
-		strgeb	r3, [r0], #1
-USER(	TUSER(	ldrgtb) r3, [r1], #0)			@ May fault
-		strgtb	r3, [r0], #1
-		b	.Lcfu_finished
-
-.Lcfu_3fupi:	subs	r2, r2, #4
-		addmi	ip, r2, #4
-		bmi	.Lcfu_3nowords
-		mov	r3, r7, pull #24
-USER(	TUSER(	ldr)	r7, [r1], #4)			@ May fault
-		orr	r3, r3, r7, push #8
-		str	r3, [r0], #4
-		mov	ip, r1, lsl #32 - PAGE_SHIFT
-		rsb	ip, ip, #0
-		movs	ip, ip, lsr #32 - PAGE_SHIFT
-		beq	.Lcfu_3fupi
-		cmp	r2, ip
-		movlt	ip, r2
-		sub	r2, r2, ip
-		subs	ip, ip, #16
-		blt	.Lcfu_3rem8lp
-
-.Lcfu_3cpy8lp:	mov	r3, r7, pull #24
-		ldmia	r1!, {r4 - r7}			@ Shouldnt fault
-		orr	r3, r3, r4, push #8
-		mov	r4, r4, pull #24
-		orr	r4, r4, r5, push #8
-		mov	r5, r5, pull #24
-		orr	r5, r5, r6, push #8
-		mov	r6, r6, pull #24
-		orr	r6, r6, r7, push #8
-		stmia	r0!, {r3 - r6}
-		subs	ip, ip, #16
-		bpl	.Lcfu_3cpy8lp
-
-.Lcfu_3rem8lp:	tst	ip, #8
-		movne	r3, r7, pull #24
-		ldmneia	r1!, {r4, r7}			@ Shouldnt fault
-		orrne	r3, r3, r4, push #8
-		movne	r4, r4, pull #24
-		orrne	r4, r4, r7, push #8
-		stmneia	r0!, {r3 - r4}
-		tst	ip, #4
-		movne	r3, r7, pull #24
-USER(	TUSER(	ldrne) r7, [r1], #4)			@ May fault
-		orrne	r3, r3, r7, push #8
-		strne	r3, [r0], #4
-		ands	ip, ip, #3
-		beq	.Lcfu_3fupi
-.Lcfu_3nowords:	mov	r3, r7, get_byte_3
-		teq	ip, #0
-		beq	.Lcfu_finished
-		cmp	ip, #2
-		strb	r3, [r0], #1
-USER(	TUSER(	ldrgeb) r3, [r1], #1)			@ May fault
-		strgeb	r3, [r0], #1
-USER(	TUSER(	ldrgtb) r3, [r1], #1)			@ May fault
-		strgtb	r3, [r0], #1
-		b	.Lcfu_finished
-ENDPROC(__copy_from_user)
-
-		.pushsection .fixup,"ax"
-		.align	0
-		/*
-		 * We took an exception.  r0 contains a pointer to
-		 * the byte not copied.
-		 */
-9001:		ldr	r2, [sp], #4			@ void *to
-		sub	r2, r0, r2			@ bytes copied
-		ldr	r1, [sp], #4			@ unsigned long count
-		subs	r4, r1, r2			@ bytes left to copy
-		movne	r1, r4
-		blne	__memzero
-		mov	r0, r4
-		ldmfd	sp!, {r4 - r7, pc}
-		.popsection
-

arch/arm/mach-cns3xxx/pcie.c

@@ -166,12 +166,6 @@ static struct pci_ops cns3xxx_pcie_ops = {
 	.write = cns3xxx_pci_write_config,
 };
 
-static struct pci_bus *cns3xxx_pci_scan_bus(int nr, struct pci_sys_data *sys)
-{
-	return pci_scan_root_bus(NULL, sys->busnr, &cns3xxx_pcie_ops, sys,
-				 &sys->resources);
-}
-
 static int cns3xxx_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
 	struct cns3xxx_pcie *cnspci = pdev_to_cnspci(dev);
@@ -221,10 +215,9 @@ static struct cns3xxx_pcie cns3xxx_pcie[] = {
 		.irqs = { IRQ_CNS3XXX_PCIE0_RC, IRQ_CNS3XXX_PCIE0_DEVICE, },
 		.hw_pci = {
 			.domain = 0,
-			.swizzle = pci_std_swizzle,
 			.nr_controllers = 1,
+			.ops = &cns3xxx_pcie_ops,
 			.setup = cns3xxx_pci_setup,
-			.scan = cns3xxx_pci_scan_bus,
 			.map_irq = cns3xxx_pcie_map_irq,
 		},
 	},
@@ -264,10 +257,9 @@ static struct cns3xxx_pcie cns3xxx_pcie[] = {
 		.irqs = { IRQ_CNS3XXX_PCIE1_RC, IRQ_CNS3XXX_PCIE1_DEVICE, },
 		.hw_pci = {
 			.domain = 1,
-			.swizzle = pci_std_swizzle,
 			.nr_controllers = 1,
+			.ops = &cns3xxx_pcie_ops,
 			.setup = cns3xxx_pci_setup,
-			.scan = cns3xxx_pci_scan_bus,
 			.map_irq = cns3xxx_pcie_map_irq,
 		},
 	},

arch/arm/mach-dove/pcie.c

@@ -43,6 +43,7 @@ static int __init dove_pcie_setup(int nr, struct pci_sys_data *sys)
 		return 0;
 
 	pp = &pcie_port[nr];
+	sys->private_data = pp;
 	pp->root_bus_nr = sys->busnr;
 
 	/*
@@ -93,19 +94,6 @@ static int __init dove_pcie_setup(int nr, struct pci_sys_data *sys)
 	return 1;
 }
 
-static struct pcie_port *bus_to_port(int bus)
-{
-	int i;
-
-	for (i = num_pcie_ports - 1; i >= 0; i--) {
-		int rbus = pcie_port[i].root_bus_nr;
-		if (rbus != -1 && rbus <= bus)
-			break;
-	}
-
-	return i >= 0 ? pcie_port + i : NULL;
-}
-
 static int pcie_valid_config(struct pcie_port *pp, int bus, int dev)
 {
 	/*
@@ -121,7 +109,8 @@ static int pcie_valid_config(struct pcie_port *pp, int bus, int dev)
 static int pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,
 			int size, u32 *val)
 {
-	struct pcie_port *pp = bus_to_port(bus->number);
+	struct pci_sys_data *sys = bus->sysdata;
+	struct pcie_port *pp = sys->private_data;
 	unsigned long flags;
 	int ret;
 
@@ -140,7 +129,8 @@ static int pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,
 static int pcie_wr_conf(struct pci_bus *bus, u32 devfn,
 			int where, int size, u32 val)
 {
-	struct pcie_port *pp = bus_to_port(bus->number);
+	struct pci_sys_data *sys = bus->sysdata;
+	struct pcie_port *pp = sys->private_data;
 	unsigned long flags;
 	int ret;
 
@@ -194,14 +184,14 @@ dove_pcie_scan_bus(int nr, struct pci_sys_data *sys)
 
 static int __init dove_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
-	struct pcie_port *pp = bus_to_port(dev->bus->number);
+	struct pci_sys_data *sys = dev->sysdata;
+	struct pcie_port *pp = sys->private_data;
 
 	return pp->index ? IRQ_DOVE_PCIE1 : IRQ_DOVE_PCIE0;
 }
 
 static struct hw_pci dove_pci __initdata = {
 	.nr_controllers	= 2,
-	.swizzle	= pci_std_swizzle,
 	.setup		= dove_pcie_setup,
 	.scan		= dove_pcie_scan_bus,
 	.map_irq	= dove_pcie_map_irq,

arch/arm/mach-footbridge/cats-pci.c

@@ -16,6 +16,11 @@
 /* cats host-specific stuff */
 static int irqmap_cats[] __initdata = { IRQ_PCI, IRQ_IN0, IRQ_IN1, IRQ_IN3 };
 
+static u8 cats_no_swizzle(struct pci_dev *dev, u8 *pin)
+{
+	return 0;
+}
+
 static int __init cats_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
 	if (dev->irq >= 255)
@@ -39,11 +44,11 @@ static int __init cats_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
  * cards being used (ie, pci-pci bridge based cards)?
  */
 static struct hw_pci cats_pci __initdata = {
-	.swizzle		= NULL,
+	.swizzle		= cats_no_swizzle,
 	.map_irq		= cats_map_irq,
 	.nr_controllers		= 1,
+	.ops			= &dc21285_ops,
 	.setup			= dc21285_setup,
-	.scan			= dc21285_scan_bus,
 	.preinit		= dc21285_preinit,
 	.postinit		= dc21285_postinit,
 };

arch/arm/mach-footbridge/dc21285.c

@@ -129,7 +129,7 @@ dc21285_write_config(struct pci_bus *bus, unsigned int devfn, int where,
 	return PCIBIOS_SUCCESSFUL;
 }
 
-static struct pci_ops dc21285_ops = {
+struct pci_ops dc21285_ops = {
 	.read	= dc21285_read_config,
 	.write	= dc21285_write_config,
 };
@@ -284,11 +284,6 @@ int __init dc21285_setup(int nr, struct pci_sys_data *sys)
 	return 1;
 }
 
-struct pci_bus * __init dc21285_scan_bus(int nr, struct pci_sys_data *sys)
-{
-	return pci_scan_root_bus(NULL, 0, &dc21285_ops, sys, &sys->resources);
-}
-
 #define dc21285_request_irq(_a, _b, _c, _d, _e) \
 	WARN_ON(request_irq(_a, _b, _c, _d, _e) < 0)
 

arch/arm/mach-footbridge/ebsa285-pci.c

@@ -29,11 +29,10 @@ static int __init ebsa285_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 }
 
 static struct hw_pci ebsa285_pci __initdata = {
-	.swizzle		= pci_std_swizzle,
 	.map_irq		= ebsa285_map_irq,
 	.nr_controllers		= 1,
+	.ops			= &dc21285_ops,
 	.setup			= dc21285_setup,
-	.scan			= dc21285_scan_bus,
 	.preinit		= dc21285_preinit,
 	.postinit		= dc21285_postinit,
 };

arch/arm/mach-footbridge/netwinder-pci.c

@@ -43,11 +43,10 @@ static int __init netwinder_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 }
 
 static struct hw_pci netwinder_pci __initdata = {
-	.swizzle		= pci_std_swizzle,
 	.map_irq		= netwinder_map_irq,
 	.nr_controllers		= 1,
+	.ops			= &dc21285_ops,
 	.setup			= dc21285_setup,
-	.scan			= dc21285_scan_bus,
 	.preinit		= dc21285_preinit,
 	.postinit		= dc21285_postinit,
 };

arch/arm/mach-footbridge/personal-pci.c

@@ -41,8 +41,8 @@ static int __init personal_server_map_irq(const struct pci_dev *dev, u8 slot,
 static struct hw_pci personal_server_pci __initdata = {
 	.map_irq		= personal_server_map_irq,
 	.nr_controllers		= 1,
+	.ops			= &dc21285_ops,
 	.setup			= dc21285_setup,
-	.scan			= dc21285_scan_bus,
 	.preinit		= dc21285_preinit,
 	.postinit		= dc21285_postinit,
 };

arch/arm/mach-integrator/impd1.c

@@ -398,24 +398,16 @@ static int impd1_probe(struct lm_device *dev)
 		struct impd1_device *idev = impd1_devs + i;
 		struct amba_device *d;
 		unsigned long pc_base;
+		char devname[32];
 
 		pc_base = dev->resource.start + idev->offset;
-
-		d = amba_device_alloc(NULL, pc_base, SZ_4K);
-		if (!d)
+		snprintf(devname, 32, "lm%x:%5.5lx", dev->id, idev->offset >> 12);
+		d = amba_ahb_device_add(&dev->dev, devname, pc_base, SZ_4K,
+					dev->irq, dev->irq,
+					idev->platform_data, idev->id);
+		if (IS_ERR(d)) {
+			dev_err(&dev->dev, "unable to register device: %ld\n", PTR_ERR(d));
 			continue;
-
-		dev_set_name(&d->dev, "lm%x:%5.5lx", dev->id, idev->offset >> 12);
-		d->dev.parent	= &dev->dev;
-		d->irq[0]	= dev->irq;
-		d->irq[1]	= dev->irq;
-		d->periphid	= idev->id;
-		d->dev.platform_data = idev->platform_data;
-
-		ret = amba_device_add(d, &dev->resource);
-		if (ret) {
-			dev_err(&d->dev, "unable to register device: %d\n", ret);
-			amba_device_put(d);
 		}
 	}
 

arch/arm/mach-integrator/include/mach/entry-macro.S

@@ -1,39 +0,0 @@
-/*
- * arch/arm/mach-integrator/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for Integrator platforms
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <mach/hardware.h>
-#include <mach/platform.h>
-#include <mach/irqs.h>
-
-		.macro  get_irqnr_preamble, base, tmp
-		.endm
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-/* FIXME: should not be using soo many LDRs here */
-		ldr	\base, =IO_ADDRESS(INTEGRATOR_IC_BASE)
-		mov	\irqnr, #IRQ_PIC_START
-		ldr	\irqstat, [\base, #IRQ_STATUS]		@ get masked status
-		ldr	\base, =IO_ADDRESS(INTEGRATOR_HDR_BASE)
-		teq	\irqstat, #0
-		ldreq	\irqstat, [\base, #(INTEGRATOR_HDR_IC_OFFSET+IRQ_STATUS)]
-		moveq	\irqnr, #IRQ_CIC_START
-
-1001:		tst	\irqstat, #15
-		bne	1002f
-		add	\irqnr, \irqnr, #4
-		movs	\irqstat, \irqstat, lsr #4
-		bne	1001b
-1002:		tst	\irqstat, #1
-		bne	1003f
-		add	\irqnr, \irqnr, #1
-		movs	\irqstat, \irqstat, lsr #1
-		bne	1002b
-1003:		/* EQ will be set if no irqs pending */
-		.endm
-

arch/arm/mach-integrator/include/mach/irqs.h

@@ -22,37 +22,37 @@
 /* 
  *  Interrupt numbers
  */
-#define IRQ_PIC_START			0
-#define IRQ_SOFTINT			0
-#define IRQ_UARTINT0			1
-#define IRQ_UARTINT1			2
-#define IRQ_KMIINT0			3
-#define IRQ_KMIINT1			4
-#define IRQ_TIMERINT0			5
-#define IRQ_TIMERINT1			6
-#define IRQ_TIMERINT2			7
-#define IRQ_RTCINT			8
-#define IRQ_AP_EXPINT0			9
-#define IRQ_AP_EXPINT1			10
-#define IRQ_AP_EXPINT2			11
-#define IRQ_AP_EXPINT3			12
-#define IRQ_AP_PCIINT0			13
-#define IRQ_AP_PCIINT1			14
-#define IRQ_AP_PCIINT2			15
-#define IRQ_AP_PCIINT3			16
-#define IRQ_AP_V3INT			17
-#define IRQ_AP_CPINT0			18
-#define IRQ_AP_CPINT1			19
-#define IRQ_AP_LBUSTIMEOUT 		20
-#define IRQ_AP_APCINT			21
-#define IRQ_CP_CLCDCINT			22
-#define IRQ_CP_MMCIINT0			23
-#define IRQ_CP_MMCIINT1			24
-#define IRQ_CP_AACIINT			25
-#define IRQ_CP_CPPLDINT			26
-#define IRQ_CP_ETHINT			27
-#define IRQ_CP_TSPENINT			28
-#define IRQ_PIC_END			31
+#define IRQ_PIC_START			1
+#define IRQ_SOFTINT			1
+#define IRQ_UARTINT0			2
+#define IRQ_UARTINT1			3
+#define IRQ_KMIINT0			4
+#define IRQ_KMIINT1			5
+#define IRQ_TIMERINT0			6
+#define IRQ_TIMERINT1			7
+#define IRQ_TIMERINT2			8
+#define IRQ_RTCINT			9
+#define IRQ_AP_EXPINT0			10
+#define IRQ_AP_EXPINT1			11
+#define IRQ_AP_EXPINT2			12
+#define IRQ_AP_EXPINT3			13
+#define IRQ_AP_PCIINT0			14
+#define IRQ_AP_PCIINT1			15
+#define IRQ_AP_PCIINT2			16
+#define IRQ_AP_PCIINT3			17
+#define IRQ_AP_V3INT			18
+#define IRQ_AP_CPINT0			19
+#define IRQ_AP_CPINT1			20
+#define IRQ_AP_LBUSTIMEOUT 		21
+#define IRQ_AP_APCINT			22
+#define IRQ_CP_CLCDCINT			23
+#define IRQ_CP_MMCIINT0			24
+#define IRQ_CP_MMCIINT1			25
+#define IRQ_CP_AACIINT			26
+#define IRQ_CP_CPPLDINT			27
+#define IRQ_CP_ETHINT			28
+#define IRQ_CP_TSPENINT			29
+#define IRQ_PIC_END			29
 
 #define IRQ_CIC_START			32
 #define IRQ_CM_SOFTINT			32
@@ -80,4 +80,3 @@
 
 #define NR_IRQS_INTEGRATOR_AP		34
 #define NR_IRQS_INTEGRATOR_CP		47
-

arch/arm/mach-integrator/integrator_ap.c

@@ -162,12 +162,6 @@ static void __init ap_map_io(void)
 
 #define INTEGRATOR_SC_VALID_INT	0x003fffff
 
-static struct fpga_irq_data sc_irq_data = {
-	.base		= VA_IC_BASE,
-	.irq_start	= 0,
-	.chip.name	= "SC",
-};
-
 static void __init ap_init_irq(void)
 {
 	/* Disable all interrupts initially. */
@@ -178,7 +172,8 @@ static void __init ap_init_irq(void)
 	writel(-1, VA_IC_BASE + IRQ_ENABLE_CLEAR);
 	writel(-1, VA_IC_BASE + FIQ_ENABLE_CLEAR);
 
-	fpga_irq_init(-1, INTEGRATOR_SC_VALID_INT, &sc_irq_data);
+	fpga_irq_init(VA_IC_BASE, "SC", IRQ_PIC_START,
+		-1, INTEGRATOR_SC_VALID_INT, NULL);
 }
 
 #ifdef CONFIG_PM
@@ -478,6 +473,7 @@ MACHINE_START(INTEGRATOR, "ARM-Integrator")
 	.nr_irqs	= NR_IRQS_INTEGRATOR_AP,
 	.init_early	= integrator_init_early,
 	.init_irq	= ap_init_irq,
+	.handle_irq	= fpga_handle_irq,
 	.timer		= &ap_timer,
 	.init_machine	= ap_init,
 	.restart	= integrator_restart,

arch/arm/mach-integrator/integrator_cp.c

@@ -143,30 +143,14 @@ static void __init intcp_map_io(void)
 	iotable_init(intcp_io_desc, ARRAY_SIZE(intcp_io_desc));
 }
 
-static struct fpga_irq_data cic_irq_data = {
-	.base		= INTCP_VA_CIC_BASE,
-	.irq_start	= IRQ_CIC_START,
-	.chip.name	= "CIC",
-};
-
-static struct fpga_irq_data pic_irq_data = {
-	.base		= INTCP_VA_PIC_BASE,
-	.irq_start	= IRQ_PIC_START,
-	.chip.name	= "PIC",
-};
-
-static struct fpga_irq_data sic_irq_data = {
-	.base		= INTCP_VA_SIC_BASE,
-	.irq_start	= IRQ_SIC_START,
-	.chip.name	= "SIC",
-};
-
 static void __init intcp_init_irq(void)
 {
-	u32 pic_mask, sic_mask;
+	u32 pic_mask, cic_mask, sic_mask;
 
+	/* These masks are for the HW IRQ registers */
 	pic_mask = ~((~0u) << (11 - IRQ_PIC_START));
 	pic_mask |= (~((~0u) << (29 - 22))) << 22;
+	cic_mask = ~((~0u) << (1 + IRQ_CIC_END - IRQ_CIC_START));
 	sic_mask = ~((~0u) << (1 + IRQ_SIC_END - IRQ_SIC_START));
 
 	/*
@@ -179,12 +163,14 @@ static void __init intcp_init_irq(void)
 	writel(sic_mask, INTCP_VA_SIC_BASE + IRQ_ENABLE_CLEAR);
 	writel(sic_mask, INTCP_VA_SIC_BASE + FIQ_ENABLE_CLEAR);
 
-	fpga_irq_init(-1, pic_mask, &pic_irq_data);
+	fpga_irq_init(INTCP_VA_PIC_BASE, "PIC", IRQ_PIC_START,
+		      -1, pic_mask, NULL);
 
-	fpga_irq_init(-1, ~((~0u) << (1 + IRQ_CIC_END - IRQ_CIC_START)),
-		&cic_irq_data);
+	fpga_irq_init(INTCP_VA_CIC_BASE, "CIC", IRQ_CIC_START,
+		      -1, cic_mask, NULL);
 
-	fpga_irq_init(IRQ_CP_CPPLDINT, sic_mask, &sic_irq_data);
+	fpga_irq_init(INTCP_VA_SIC_BASE, "SIC", IRQ_SIC_START,
+		      IRQ_CP_CPPLDINT, sic_mask, NULL);
 }
 
 /*
@@ -467,6 +453,7 @@ MACHINE_START(CINTEGRATOR, "ARM-IntegratorCP")
 	.nr_irqs	= NR_IRQS_INTEGRATOR_CP,
 	.init_early	= intcp_init_early,
 	.init_irq	= intcp_init_irq,
+	.handle_irq	= fpga_handle_irq,
 	.timer		= &cp_timer,
 	.init_machine	= intcp_init,
 	.restart	= integrator_restart,

arch/arm/mach-integrator/pci.c

@@ -70,21 +70,10 @@
  */
 static u8 __init integrator_swizzle(struct pci_dev *dev, u8 *pinp)
 {
-	int pin = *pinp;
+	if (*pinp == 0)
+		*pinp = 1;
 
-	if (pin == 0)
-		pin = 1;
-
-	while (dev->bus->self) {
-		pin = pci_swizzle_interrupt_pin(dev, pin);
-		/*
-		 * move up the chain of bridges, swizzling as we go.
-		 */
-		dev = dev->bus->self;
-	}
-	*pinp = pin;
-
-	return PCI_SLOT(dev->devfn);
+	return pci_common_swizzle(dev, pinp);
 }
 
 static int irq_tab[4] __initdata = {
@@ -109,7 +98,7 @@ static struct hw_pci integrator_pci __initdata = {
 	.map_irq		= integrator_map_irq,
 	.setup			= pci_v3_setup,
 	.nr_controllers		= 1,
-	.scan			= pci_v3_scan_bus,
+	.ops			= &pci_v3_ops,
 	.preinit		= pci_v3_preinit,
 	.postinit		= pci_v3_postinit,
 };

arch/arm/mach-integrator/pci_v3.c

@@ -340,7 +340,7 @@ static int v3_write_config(struct pci_bus *bus, unsigned int devfn, int where,
 	return PCIBIOS_SUCCESSFUL;
 }
 
-static struct pci_ops pci_v3_ops = {
+struct pci_ops pci_v3_ops = {
 	.read	= v3_read_config,
 	.write	= v3_write_config,
 };
@@ -488,12 +488,6 @@ int __init pci_v3_setup(int nr, struct pci_sys_data *sys)
 	return ret;
 }
 
-struct pci_bus * __init pci_v3_scan_bus(int nr, struct pci_sys_data *sys)
-{
-	return pci_scan_root_bus(NULL, sys->busnr, &pci_v3_ops, sys,
-				 &sys->resources);
-}
-
 /*
  * V3_LB_BASE? - local bus address
  * V3_LB_MAP?  - pci bus address

arch/arm/mach-iop13xx/iq81340mc.c

@@ -54,7 +54,6 @@ iq81340mc_pcix_map_irq(const struct pci_dev *dev, u8 idsel, u8 pin)
 }
 
 static struct hw_pci iq81340mc_pci __initdata = {
-	.swizzle	= pci_std_swizzle,
 	.nr_controllers = 0,
 	.setup		= iop13xx_pci_setup,
 	.map_irq	= iq81340mc_pcix_map_irq,

arch/arm/mach-iop13xx/iq81340sc.c

@@ -56,7 +56,6 @@ iq81340sc_atux_map_irq(struct pci_dev *dev, u8 idsel, u8 pin)
 }
 
 static struct hw_pci iq81340sc_pci __initdata = {
-	.swizzle	= pci_std_swizzle,
 	.nr_controllers = 0,
 	.setup		= iop13xx_pci_setup,
 	.scan		= iop13xx_scan_bus,

arch/arm/mach-iop32x/em7210.c

@@ -103,11 +103,10 @@ em7210_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 }
 
 static struct hw_pci em7210_pci __initdata = {
-	.swizzle	= pci_std_swizzle,
 	.nr_controllers = 1,
+	.ops		= &iop3xx_ops,
 	.setup		= iop3xx_pci_setup,
 	.preinit	= iop3xx_pci_preinit,
-	.scan		= iop3xx_pci_scan_bus,
 	.map_irq	= em7210_pci_map_irq,
 };
 

arch/arm/mach-iop32x/glantank.c

@@ -96,11 +96,10 @@ glantank_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 }
 
 static struct hw_pci glantank_pci __initdata = {
-	.swizzle	= pci_std_swizzle,
 	.nr_controllers = 1,
+	.ops		= &iop3xx_ops,
 	.setup		= iop3xx_pci_setup,
 	.preinit	= iop3xx_pci_preinit,
-	.scan		= iop3xx_pci_scan_bus,
 	.map_irq	= glantank_pci_map_irq,
 };
 

arch/arm/mach-iop32x/iq31244.c

@@ -130,11 +130,10 @@ ep80219_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 }
 
 static struct hw_pci ep80219_pci __initdata = {
-	.swizzle	= pci_std_swizzle,
 	.nr_controllers = 1,
+	.ops		= &iop3xx_ops,
 	.setup		= iop3xx_pci_setup,
 	.preinit	= iop3xx_pci_preinit,
-	.scan		= iop3xx_pci_scan_bus,
 	.map_irq	= ep80219_pci_map_irq,
 };
 
@@ -166,11 +165,10 @@ iq31244_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 }
 
 static struct hw_pci iq31244_pci __initdata = {
-	.swizzle	= pci_std_swizzle,
 	.nr_controllers = 1,
+	.ops		= &iop3xx_ops,
 	.setup		= iop3xx_pci_setup,
 	.preinit	= iop3xx_pci_preinit,
-	.scan		= iop3xx_pci_scan_bus,
 	.map_irq	= iq31244_pci_map_irq,
 };
 

arch/arm/mach-iop32x/iq80321.c

@@ -101,11 +101,10 @@ iq80321_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 }
 
 static struct hw_pci iq80321_pci __initdata = {
-	.swizzle	= pci_std_swizzle,
 	.nr_controllers = 1,
+	.ops		= &iop3xx_ops,
 	.setup		= iop3xx_pci_setup,
 	.preinit	= iop3xx_pci_preinit_cond,
-	.scan		= iop3xx_pci_scan_bus,
 	.map_irq	= iq80321_pci_map_irq,
 };
 

arch/arm/mach-iop32x/n2100.c

@@ -114,11 +114,10 @@ n2100_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 }
 
 static struct hw_pci n2100_pci __initdata = {
-	.swizzle	= pci_std_swizzle,
 	.nr_controllers = 1,
+	.ops		= &iop3xx_ops,
 	.setup		= iop3xx_pci_setup,
 	.preinit	= iop3xx_pci_preinit,
-	.scan		= iop3xx_pci_scan_bus,
 	.map_irq	= n2100_pci_map_irq,
 };
 

arch/arm/mach-iop33x/iq80331.c

@@ -84,11 +84,10 @@ iq80331_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 }
 
 static struct hw_pci iq80331_pci __initdata = {
-	.swizzle	= pci_std_swizzle,
 	.nr_controllers = 1,
+	.ops		= &iop3xx_ops,
 	.setup		= iop3xx_pci_setup,
 	.preinit	= iop3xx_pci_preinit_cond,
-	.scan		= iop3xx_pci_scan_bus,
 	.map_irq	= iq80331_pci_map_irq,
 };
 

arch/arm/mach-iop33x/iq80332.c

@@ -84,11 +84,10 @@ iq80332_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 }
 
 static struct hw_pci iq80332_pci __initdata = {
-	.swizzle	= pci_std_swizzle,
 	.nr_controllers = 1,
+	.ops		= &iop3xx_ops,
 	.setup		= iop3xx_pci_setup,
 	.preinit	= iop3xx_pci_preinit_cond,
-	.scan		= iop3xx_pci_scan_bus,
 	.map_irq	= iq80332_pci_map_irq,
 };
 

arch/arm/mach-ixp2000/enp2611.c

@@ -141,13 +141,6 @@ static struct pci_ops enp2611_pci_ops = {
 	.write  = enp2611_pci_write_config
 };
 
-static struct pci_bus * __init enp2611_pci_scan_bus(int nr,
-						struct pci_sys_data *sys)
-{
-	return pci_scan_root_bus(NULL, sys->busnr, &enp2611_pci_ops, sys,
-				 &sys->resources);
-}
-
 static int __init enp2611_pci_map_irq(const struct pci_dev *dev, u8 slot,
 	u8 pin)
 {
@@ -180,9 +173,9 @@ static int __init enp2611_pci_map_irq(const struct pci_dev *dev, u8 slot,
 
 struct hw_pci enp2611_pci __initdata = {
 	.nr_controllers	= 1,
+	.ops		= &enp2611_pci_ops,
 	.setup		= enp2611_pci_setup,
 	.preinit	= enp2611_pci_preinit,
-	.scan		= enp2611_pci_scan_bus,
 	.map_irq	= enp2611_pci_map_irq,
 };
 

arch/arm/mach-ixp2000/include/mach/platform.h

@@ -127,10 +127,10 @@ unsigned long ixp2000_gettimeoffset(void);
 
 struct pci_sys_data;
 
+extern struct pci_ops ixp2000_pci_ops;
 u32 *ixp2000_pci_config_addr(unsigned int bus, unsigned int devfn, int where);
 void ixp2000_pci_preinit(void);
 int ixp2000_pci_setup(int, struct pci_sys_data*);
-struct pci_bus* ixp2000_pci_scan_bus(int, struct pci_sys_data*);
 int ixp2000_pci_read_config(struct pci_bus*, unsigned int, int, int, u32 *);
 int ixp2000_pci_write_config(struct pci_bus*, unsigned int, int, int, u32);
 

arch/arm/mach-ixp2000/ixdp2400.c

@@ -146,10 +146,10 @@ static void ixdp2400_pci_postinit(void)
 
 static struct hw_pci ixdp2400_pci __initdata = {
 	.nr_controllers	= 1,
+	.ops		= &ixp2000_pci_ops,
 	.setup		= ixdp2400_pci_setup,
 	.preinit	= ixdp2400_pci_preinit,
 	.postinit	= ixdp2400_pci_postinit,
-	.scan		= ixp2000_pci_scan_bus,
 	.map_irq	= ixdp2400_pci_map_irq,
 };
 

arch/arm/mach-ixp2000/ixdp2800.c

@@ -246,10 +246,10 @@ static void __init ixdp2800_pci_postinit(void)
 
 struct __initdata hw_pci ixdp2800_pci __initdata = {
 	.nr_controllers	= 1,
+	.ops		= &ixp2000_pci_ops,
 	.setup		= ixdp2800_pci_setup,
 	.preinit	= ixdp2800_pci_preinit,
 	.postinit	= ixdp2800_pci_postinit,
-	.scan		= ixp2000_pci_scan_bus,
 	.map_irq	= ixdp2800_pci_map_irq,
 };
 

arch/arm/mach-ixp2000/ixdp2x01.c

@@ -327,9 +327,9 @@ static int ixdp2x01_pci_setup(int nr, struct pci_sys_data *sys)
 
 struct hw_pci ixdp2x01_pci __initdata = {
 	.nr_controllers	= 1,
+	.ops		= &ixp2000_pci_ops,
 	.setup		= ixdp2x01_pci_setup,
 	.preinit	= ixdp2x01_pci_preinit,
-	.scan		= ixp2000_pci_scan_bus,
 	.map_irq	= ixdp2x01_pci_map_irq,
 };
 

arch/arm/mach-ixp2000/pci.c

@@ -124,17 +124,11 @@ int ixp2000_pci_write_config(struct pci_bus *bus, unsigned int devfn, int where,
 }
 
 
-static struct pci_ops ixp2000_pci_ops = {
+struct pci_ops ixp2000_pci_ops = {
 	.read	= ixp2000_pci_read_config,
 	.write	= ixp2000_pci_write_config
 };
 
-struct pci_bus *ixp2000_pci_scan_bus(int nr, struct pci_sys_data *sysdata)
-{
-	return pci_scan_root_bus(NULL, sysdata->busnr, &ixp2000_pci_ops,
-				 sysdata, &sysdata->resources);
-}
-
 
 int ixp2000_pci_abort_handler(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 {

arch/arm/mach-ixp23xx/include/mach/platform.h

@@ -37,7 +37,7 @@ void ixp23xx_sys_init(void);
 void ixp23xx_restart(char, const char *);
 int ixp23xx_pci_setup(int, struct pci_sys_data *);
 void ixp23xx_pci_preinit(void);
-struct pci_bus *ixp23xx_pci_scan_bus(int, struct pci_sys_data*);
+extern struct pci_ops ixp23xx_pci_ops;
 void ixp23xx_pci_slave_init(void);
 
 extern struct sys_timer ixp23xx_timer;

arch/arm/mach-ixp23xx/ixdp2351.c

@@ -251,9 +251,9 @@ static int __init ixdp2351_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 
 struct hw_pci ixdp2351_pci __initdata = {
 	.nr_controllers	= 1,
+	.ops		= &ixp23xx_pci_ops,
 	.preinit	= ixp23xx_pci_preinit,
 	.setup		= ixp23xx_pci_setup,
-	.scan		= ixp23xx_pci_scan_bus,
 	.map_irq	= ixdp2351_map_irq,
 };
 

arch/arm/mach-ixp23xx/pci.c

@@ -140,12 +140,6 @@ struct pci_ops ixp23xx_pci_ops = {
 	.write	= ixp23xx_pci_write_config,
 };
 
-struct pci_bus *ixp23xx_pci_scan_bus(int nr, struct pci_sys_data *sysdata)
-{
-	return pci_scan_root_bus(NULL, sysdata->busnr, &ixp23xx_pci_ops,
-				 sysdata, &sysdata->resources);
-}
-
 int ixp23xx_pci_abort_handler(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 {
 	volatile unsigned long temp;

arch/arm/mach-ixp23xx/roadrunner.c

@@ -118,9 +118,9 @@ static void __init roadrunner_pci_preinit(void)
 
 static struct hw_pci roadrunner_pci __initdata = {
 	.nr_controllers	= 1,
+	.ops		= &ixp23xx_pci_ops,
 	.preinit	= roadrunner_pci_preinit,
 	.setup		= ixp23xx_pci_setup,
-	.scan		= ixp23xx_pci_scan_bus,
 	.map_irq	= roadrunner_map_irq,
 };
 

arch/arm/mach-ixp4xx/avila-pci.c

@@ -65,10 +65,9 @@ static int __init avila_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 
 struct hw_pci avila_pci __initdata = {
 	.nr_controllers = 1,
+	.ops		= &ixp4xx_ops,
 	.preinit	= avila_pci_preinit,
-	.swizzle	= pci_std_swizzle,
 	.setup		= ixp4xx_setup,
-	.scan		= ixp4xx_scan_bus,
 	.map_irq	= avila_map_irq,
 };
 

arch/arm/mach-ixp4xx/common-pci.c

@@ -480,12 +480,6 @@ int ixp4xx_setup(int nr, struct pci_sys_data *sys)
 	return 1;
 }
 
-struct pci_bus * __devinit ixp4xx_scan_bus(int nr, struct pci_sys_data *sys)
-{
-	return pci_scan_root_bus(NULL, sys->busnr, &ixp4xx_ops, sys,
-				 &sys->resources);
-}
-
 int dma_set_coherent_mask(struct device *dev, u64 mask)
 {
 	if (mask >= SZ_64M - 1)

arch/arm/mach-ixp4xx/coyote-pci.c

@@ -48,10 +48,9 @@ static int __init coyote_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 
 struct hw_pci coyote_pci __initdata = {
 	.nr_controllers = 1,
+	.ops		= &ixp4xx_ops,
 	.preinit =        coyote_pci_preinit,
-	.swizzle =        pci_std_swizzle,
 	.setup =          ixp4xx_setup,
-	.scan =           ixp4xx_scan_bus,
 	.map_irq =        coyote_map_irq,
 };
 

arch/arm/mach-ixp4xx/dsmg600-pci.c

@@ -62,10 +62,9 @@ static int __init dsmg600_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 
 struct hw_pci __initdata dsmg600_pci = {
 	.nr_controllers = 1,
+	.ops		= &ixp4xx_ops,
 	.preinit	= dsmg600_pci_preinit,
-	.swizzle	= pci_std_swizzle,
 	.setup		= ixp4xx_setup,
-	.scan		= ixp4xx_scan_bus,
 	.map_irq	= dsmg600_map_irq,
 };
 

arch/arm/mach-ixp4xx/fsg-pci.c

@@ -59,10 +59,9 @@ static int __init fsg_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 
 struct hw_pci fsg_pci __initdata = {
 	.nr_controllers = 1,
+	.ops		= &ixp4xx_ops,
 	.preinit =	  fsg_pci_preinit,
-	.swizzle =	  pci_std_swizzle,
 	.setup =	  ixp4xx_setup,
-	.scan =		  ixp4xx_scan_bus,
 	.map_irq =	  fsg_map_irq,
 };
 

arch/arm/mach-ixp4xx/gateway7001-pci.c

@@ -47,10 +47,9 @@ static int __init gateway7001_map_irq(const struct pci_dev *dev, u8 slot,
 
 struct hw_pci gateway7001_pci __initdata = {
 	.nr_controllers = 1,
+	.ops		= &ixp4xx_ops,
 	.preinit =        gateway7001_pci_preinit,
-	.swizzle =        pci_std_swizzle,
 	.setup =          ixp4xx_setup,
-	.scan =           ixp4xx_scan_bus,
 	.map_irq =        gateway7001_map_irq,
 };
 

arch/arm/mach-ixp4xx/goramo_mlr.c

@@ -473,11 +473,10 @@ static int __init gmlr_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 
 static struct hw_pci gmlr_hw_pci __initdata = {
 	.nr_controllers = 1,
+	.ops		= &ixp4xx_ops,
 	.preinit	= gmlr_pci_preinit,
 	.postinit	= gmlr_pci_postinit,
-	.swizzle	= pci_std_swizzle,
 	.setup		= ixp4xx_setup,
-	.scan		= ixp4xx_scan_bus,
 	.map_irq	= gmlr_map_irq,
 };
 

arch/arm/mach-ixp4xx/gtwx5715-pci.c

@@ -67,10 +67,9 @@ static int __init gtwx5715_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 
 struct hw_pci gtwx5715_pci __initdata = {
 	.nr_controllers = 1,
+	.ops		= &ixp4xx_ops,
 	.preinit =        gtwx5715_pci_preinit,
-	.swizzle =        pci_std_swizzle,
 	.setup =          ixp4xx_setup,
-	.scan =           ixp4xx_scan_bus,
 	.map_irq =        gtwx5715_map_irq,
 };
 

arch/arm/mach-ixp4xx/include/mach/platform.h

@@ -130,7 +130,7 @@ extern void ixp4xx_restart(char, const char *);
 extern void ixp4xx_pci_preinit(void);
 struct pci_sys_data;
 extern int ixp4xx_setup(int nr, struct pci_sys_data *sys);
-extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys);
+extern struct pci_ops ixp4xx_ops;
 
 /*
  * GPIO-functions

arch/arm/mach-ixp4xx/ixdp425-pci.c

@@ -60,10 +60,9 @@ static int __init ixdp425_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 
 struct hw_pci ixdp425_pci __initdata = {
 	.nr_controllers = 1,
+	.ops		= &ixp4xx_ops,
 	.preinit	= ixdp425_pci_preinit,
-	.swizzle	= pci_std_swizzle,
 	.setup		= ixp4xx_setup,
-	.scan		= ixp4xx_scan_bus,
 	.map_irq	= ixdp425_map_irq,
 };
 

arch/arm/mach-ixp4xx/ixdpg425-pci.c

@@ -42,10 +42,9 @@ static int __init ixdpg425_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 
 struct hw_pci ixdpg425_pci __initdata = {
 	.nr_controllers = 1,
+	.ops		= &ixp4xx_ops,
 	.preinit =        ixdpg425_pci_preinit,
-	.swizzle =        pci_std_swizzle,
 	.setup =          ixp4xx_setup,
-	.scan =           ixp4xx_scan_bus,
 	.map_irq =        ixdpg425_map_irq,
 };
 

arch/arm/mach-ixp4xx/miccpt-pci.c

@@ -61,10 +61,9 @@ static int __init miccpt_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 
 struct hw_pci miccpt_pci __initdata = {
 	.nr_controllers = 1,
+	.ops		= &ixp4xx_ops,
 	.preinit	= miccpt_pci_preinit,
-	.swizzle	= pci_std_swizzle,
 	.setup		= ixp4xx_setup,
-	.scan		= ixp4xx_scan_bus,
 	.map_irq	= miccpt_map_irq,
 };
 

arch/arm/mach-ixp4xx/nas100d-pci.c

@@ -58,10 +58,9 @@ static int __init nas100d_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 
 struct hw_pci __initdata nas100d_pci = {
 	.nr_controllers = 1,
+	.ops		= &ixp4xx_ops,
 	.preinit	= nas100d_pci_preinit,
-	.swizzle	= pci_std_swizzle,
 	.setup		= ixp4xx_setup,
-	.scan		= ixp4xx_scan_bus,
 	.map_irq	= nas100d_map_irq,
 };
 

arch/arm/mach-ixp4xx/nslu2-pci.c

@@ -54,10 +54,9 @@ static int __init nslu2_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 
 struct hw_pci __initdata nslu2_pci = {
 	.nr_controllers = 1,
+	.ops		= &ixp4xx_ops,
 	.preinit	= nslu2_pci_preinit,
-	.swizzle	= pci_std_swizzle,
 	.setup		= ixp4xx_setup,
-	.scan		= ixp4xx_scan_bus,
 	.map_irq	= nslu2_map_irq,
 };
 

arch/arm/mach-ixp4xx/vulcan-pci.c

@@ -56,10 +56,9 @@ static int __init vulcan_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 
 struct hw_pci vulcan_pci __initdata = {
 	.nr_controllers	= 1,
+	.ops		= &ixp4xx_ops,
 	.preinit	= vulcan_pci_preinit,
-	.swizzle	= pci_std_swizzle,
 	.setup		= ixp4xx_setup,
-	.scan		= ixp4xx_scan_bus,
 	.map_irq	= vulcan_map_irq,
 };
 

arch/arm/mach-ixp4xx/wg302v2-pci.c

@@ -46,10 +46,9 @@ static int __init wg302v2_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 
 struct hw_pci wg302v2_pci __initdata = {
 	.nr_controllers = 1,
+	.ops = &ixp4xx_ops,
 	.preinit =        wg302v2_pci_preinit,
-	.swizzle =        pci_std_swizzle,
 	.setup =          ixp4xx_setup,
-	.scan =           ixp4xx_scan_bus,
 	.map_irq =        wg302v2_map_irq,
 };
 

arch/arm/mach-kirkwood/pcie.c

@@ -44,12 +44,6 @@ struct pcie_port {
 static int pcie_port_map[2];
 static int num_pcie_ports;
 
-static inline struct pcie_port *bus_to_port(struct pci_bus *bus)
-{
-	struct pci_sys_data *sys = bus->sysdata;
-	return sys->private_data;
-}
-
 static int pcie_valid_config(struct pcie_port *pp, int bus, int dev)
 {
 	/*
@@ -79,7 +73,8 @@ static int pcie_valid_config(struct pcie_port *pp, int bus, int dev)
 static int pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,
 			int size, u32 *val)
 {
-	struct pcie_port *pp = bus_to_port(bus);
+	struct pci_sys_data *sys = bus->sysdata;
+	struct pcie_port *pp = sys->private_data;
 	unsigned long flags;
 	int ret;
 
@@ -98,7 +93,8 @@ static int pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,
 static int pcie_wr_conf(struct pci_bus *bus, u32 devfn,
 			int where, int size, u32 val)
 {
-	struct pcie_port *pp = bus_to_port(bus);
+	struct pci_sys_data *sys = bus->sysdata;
+	struct pcie_port *pp = sys->private_data;
 	unsigned long flags;
 	int ret;
 
@@ -248,13 +244,13 @@ kirkwood_pcie_scan_bus(int nr, struct pci_sys_data *sys)
 static int __init kirkwood_pcie_map_irq(const struct pci_dev *dev, u8 slot,
 	u8 pin)
 {
-	struct pcie_port *pp = bus_to_port(dev->bus);
+	struct pci_sys_data *sys = dev->sysdata;
+	struct pcie_port *pp = sys->private_data;
 
 	return pp->irq;
 }
 
 static struct hw_pci kirkwood_pci __initdata = {
-	.swizzle	= pci_std_swizzle,
 	.setup		= kirkwood_pcie_setup,
 	.scan		= kirkwood_pcie_scan_bus,
 	.map_irq	= kirkwood_pcie_map_irq,

arch/arm/mach-ks8695/pci.c

@@ -141,12 +141,6 @@ static struct pci_ops ks8695_pci_ops = {
 	.write	= ks8695_pci_writeconfig,
 };
 
-static struct pci_bus* __init ks8695_pci_scan_bus(int nr, struct pci_sys_data *sys)
-{
-	return pci_scan_root_bus(NULL, sys->busnr, &ks8695_pci_ops, sys,
-				 &sys->resources);
-}
-
 static struct resource pci_mem = {
 	.name	= "PCI Memory space",
 	.start	= KS8695_PCIMEM_PA,
@@ -302,11 +296,10 @@ static void ks8695_show_pciregs(void)
 
 static struct hw_pci ks8695_pci __initdata = {
 	.nr_controllers	= 1,
+	.ops		= &ks8695_pci_ops,
 	.preinit	= ks8695_pci_preinit,
 	.setup		= ks8695_pci_setup,
-	.scan		= ks8695_pci_scan_bus,
 	.postinit	= NULL,
-	.swizzle	= pci_std_swizzle,
 	.map_irq	= NULL,
 };
 

arch/arm/mach-mv78xx0/pcie.c

@@ -147,6 +147,7 @@ static int __init mv78xx0_pcie_setup(int nr, struct pci_sys_data *sys)
 		return 0;
 
 	pp = &pcie_port[nr];
+	sys->private_data = pp;
 	pp->root_bus_nr = sys->busnr;
 
 	/*
@@ -161,19 +162,6 @@ static int __init mv78xx0_pcie_setup(int nr, struct pci_sys_data *sys)
 	return 1;
 }
 
-static struct pcie_port *bus_to_port(int bus)
-{
-	int i;
-
-	for (i = num_pcie_ports - 1; i >= 0; i--) {
-		int rbus = pcie_port[i].root_bus_nr;
-		if (rbus != -1 && rbus <= bus)
-			break;
-	}
-
-	return i >= 0 ? pcie_port + i : NULL;
-}
-
 static int pcie_valid_config(struct pcie_port *pp, int bus, int dev)
 {
 	/*
@@ -189,7 +177,8 @@ static int pcie_valid_config(struct pcie_port *pp, int bus, int dev)
 static int pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,
 			int size, u32 *val)
 {
-	struct pcie_port *pp = bus_to_port(bus->number);
+	struct pci_sys_data *sys = bus->sysdata;
+	struct pcie_port *pp = sys->private_data;
 	unsigned long flags;
 	int ret;
 
@@ -208,7 +197,8 @@ static int pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,
 static int pcie_wr_conf(struct pci_bus *bus, u32 devfn,
 			int where, int size, u32 val)
 {
-	struct pcie_port *pp = bus_to_port(bus->number);
+	struct pci_sys_data *sys = bus->sysdata;
+	struct pcie_port *pp = sys->private_data;
 	unsigned long flags;
 	int ret;
 
@@ -263,7 +253,8 @@ mv78xx0_pcie_scan_bus(int nr, struct pci_sys_data *sys)
 static int __init mv78xx0_pcie_map_irq(const struct pci_dev *dev, u8 slot,
 	u8 pin)
 {
-	struct pcie_port *pp = bus_to_port(dev->bus->number);
+	struct pci_sys_data *sys = dev->bus->sysdata;
+	struct pcie_port *pp = sys->private_data;
 
 	return IRQ_MV78XX0_PCIE_00 + (pp->maj << 2) + pp->min;
 }
@@ -271,7 +262,6 @@ static int __init mv78xx0_pcie_map_irq(const struct pci_dev *dev, u8 slot,
 static struct hw_pci mv78xx0_pci __initdata = {
 	.nr_controllers	= 8,
 	.preinit	= mv78xx0_pcie_preinit,
-	.swizzle	= pci_std_swizzle,
 	.setup		= mv78xx0_pcie_setup,
 	.scan		= mv78xx0_pcie_scan_bus,
 	.map_irq	= mv78xx0_pcie_map_irq,

arch/arm/mach-mxs/devices-mx23.h

@@ -11,10 +11,16 @@
 #include <mach/mx23.h>
 #include <mach/devices-common.h>
 #include <mach/mxsfb.h>
+#include <linux/amba/bus.h>
 
-extern const struct amba_device mx23_duart_device __initconst;
-#define mx23_add_duart() \
-	mxs_add_duart(&mx23_duart_device)
+static inline int mx23_add_duart(void)
+{
+	struct amba_device *d;
+
+	d = amba_ahb_device_add(NULL, "duart", MX23_DUART_BASE_ADDR, SZ_8K,
+				MX23_INT_DUART, 0, 0, 0);
+	return IS_ERR(d) ? PTR_ERR(d) : 0;
+}
 
 extern const struct mxs_auart_data mx23_auart_data[] __initconst;
 #define mx23_add_auart(id)	mxs_add_auart(&mx23_auart_data[id])

arch/arm/mach-mxs/devices-mx28.h

@@ -11,10 +11,16 @@
 #include <mach/mx28.h>
 #include <mach/devices-common.h>
 #include <mach/mxsfb.h>
+#include <linux/amba/bus.h>
 
-extern const struct amba_device mx28_duart_device __initconst;
-#define mx28_add_duart() \
-	mxs_add_duart(&mx28_duart_device)
+static inline int mx28_add_duart(void)
+{
+	struct amba_device *d;
+
+	d = amba_ahb_device_add(NULL, "duart", MX28_DUART_BASE_ADDR, SZ_8K,
+				MX28_INT_DUART, 0, 0, 0);
+	return IS_ERR(d) ? PTR_ERR(d) : 0;
+}
 
 extern const struct mxs_auart_data mx28_auart_data[] __initconst;
 #define mx28_add_auart(id)	mxs_add_auart(&mx28_auart_data[id])

arch/arm/mach-mxs/devices.c

@@ -75,22 +75,6 @@ err:
 	return pdev;
 }
 
-int __init mxs_add_amba_device(const struct amba_device *dev)
-{
-	struct amba_device *adev = amba_device_alloc(dev->dev.init_name,
-		dev->res.start, resource_size(&dev->res));
-
-	if (!adev) {
-		pr_err("%s: failed to allocate memory", __func__);
-		return -ENOMEM;
-	}
-
-	adev->irq[0] = dev->irq[0];
-	adev->irq[1] = dev->irq[1];
-
-	return amba_device_add(adev, &iomem_resource);
-}
-
 struct device mxs_apbh_bus = {
 	.init_name	= "mxs_apbh",
 	.parent         = &platform_bus,

arch/arm/mach-mxs/devices/Makefile

@@ -1,4 +1,3 @@
-obj-$(CONFIG_MXS_HAVE_AMBA_DUART) += amba-duart.o
 obj-$(CONFIG_MXS_HAVE_PLATFORM_AUART) += platform-auart.o
 obj-y += platform-dma.o
 obj-$(CONFIG_MXS_HAVE_PLATFORM_FEC) += platform-fec.o

arch/arm/mach-mxs/devices/amba-duart.c

@@ -1,40 +0,0 @@
-/*
- * Copyright (C) 2009-2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- *
- * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <asm/irq.h>
-#include <mach/mx23.h>
-#include <mach/mx28.h>
-#include <mach/devices-common.h>
-
-#define MXS_AMBA_DUART_DEVICE(name, soc)			\
-const struct amba_device name##_device __initconst = {		\
-	.dev = {						\
-		.init_name = "duart",				\
-	},							\
-	.res = {						\
-		.start = soc ## _DUART_BASE_ADDR,		\
-		.end = (soc ## _DUART_BASE_ADDR) + SZ_8K - 1,	\
-		.flags = IORESOURCE_MEM,			\
-	},							\
-	.irq = {soc ## _INT_DUART},				\
-}
-
-#ifdef CONFIG_SOC_IMX23
-MXS_AMBA_DUART_DEVICE(mx23_duart, MX23);
-#endif
-
-#ifdef CONFIG_SOC_IMX28
-MXS_AMBA_DUART_DEVICE(mx28_duart, MX28);
-#endif
-
-int __init mxs_add_duart(const struct amba_device *dev)
-{
-	return mxs_add_amba_device(dev);
-}

arch/arm/mach-mxs/include/mach/devices-common.h

@@ -27,11 +27,6 @@ static inline struct platform_device *mxs_add_platform_device(
 			name, id, res, num_resources, data, size_data, 0);
 }
 
-int __init mxs_add_amba_device(const struct amba_device *dev);
-
-/* duart */
-int __init mxs_add_duart(const struct amba_device *dev);
-
 /* auart */
 struct mxs_auart_data {
 	int id;

arch/arm/mach-orion5x/db88f5281-setup.c

@@ -265,7 +265,6 @@ static int __init db88f5281_pci_map_irq(const struct pci_dev *dev, u8 slot,
 static struct hw_pci db88f5281_pci __initdata = {
 	.nr_controllers	= 2,
 	.preinit	= db88f5281_pci_preinit,
-	.swizzle	= pci_std_swizzle,
 	.setup		= orion5x_pci_sys_setup,
 	.scan		= orion5x_pci_sys_scan_bus,
 	.map_irq	= db88f5281_pci_map_irq,