Merge branch 'next-merged' of git://aeryn.fluff.org.uk/bjdooks/linux into devel

arch/arm/Kconfig

@@ -518,6 +518,13 @@ config ARCH_S3C2410
 	  BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or
 	  the Samsung SMDK2410 development board (and derivatives).
 
+config ARCH_S3C64XX
+	bool "Samsung S3C64XX"
+	select GENERIC_GPIO
+	select HAVE_CLK
+	help
+	  Samsung S3C64XX series based systems
+
 config ARCH_SHARK
 	bool "Shark"
 	select CPU_SA110
@@ -621,6 +628,7 @@ source "arch/arm/mach-orion5x/Kconfig"
 source "arch/arm/mach-kirkwood/Kconfig"
 
 source "arch/arm/plat-s3c24xx/Kconfig"
+source "arch/arm/plat-s3c64xx/Kconfig"
 source "arch/arm/plat-s3c/Kconfig"
 
 if ARCH_S3C2410
@@ -632,6 +640,11 @@ source "arch/arm/mach-s3c2442/Kconfig"
 source "arch/arm/mach-s3c2443/Kconfig"
 endif
 
+if ARCH_S3C64XX
+source "arch/arm/mach-s3c6400/Kconfig"
+source "arch/arm/mach-s3c6410/Kconfig"
+endif
+
 source "arch/arm/mach-lh7a40x/Kconfig"
 
 source "arch/arm/mach-imx/Kconfig"

arch/arm/Makefile

@@ -121,7 +121,10 @@ endif
  machine-$(CONFIG_ARCH_OMAP3)	   := omap2
     plat-$(CONFIG_ARCH_OMAP)	   := omap
  machine-$(CONFIG_ARCH_S3C2410)	   := s3c2410 s3c2400 s3c2412 s3c2440 s3c2442 s3c2443
+ machine-$(CONFIG_ARCH_S3C24A0)	   := s3c24a0
     plat-$(CONFIG_PLAT_S3C24XX)	   := s3c24xx s3c
+ machine-$(CONFIG_ARCH_S3C64XX)	   := s3c6400 s3c6410
+    plat-$(CONFIG_PLAT_S3C64XX)	   := s3c64xx s3c
  machine-$(CONFIG_ARCH_LH7A40X)	   := lh7a40x
  machine-$(CONFIG_ARCH_VERSATILE)  := versatile
  machine-$(CONFIG_ARCH_IMX)	   := imx

arch/arm/common/vic.c

@@ -69,12 +69,12 @@ void __init vic_init(void __iomem *base, unsigned int irq_start,
 	/*
 	 * Make sure we clear all existing interrupts
 	 */
-	writel(0, base + VIC_VECT_ADDR);
+	writel(0, base + VIC_PL190_VECT_ADDR);
 	for (i = 0; i < 19; i++) {
 		unsigned int value;
 
-		value = readl(base + VIC_VECT_ADDR);
-		writel(value, base + VIC_VECT_ADDR);
+		value = readl(base + VIC_PL190_VECT_ADDR);
+		writel(value, base + VIC_PL190_VECT_ADDR);
 	}
 
 	for (i = 0; i < 16; i++) {
@@ -82,7 +82,7 @@ void __init vic_init(void __iomem *base, unsigned int irq_start,
 		writel(VIC_VECT_CNTL_ENABLE | i, reg);
 	}
 
-	writel(32, base + VIC_DEF_VECT_ADDR);
+	writel(32, base + VIC_PL190_DEF_VECT_ADDR);
 
 	for (i = 0; i < 32; i++) {
 		unsigned int irq = irq_start + i;

arch/arm/configs/s3c6400_defconfig

@@ -0,0 +1,845 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.28-rc3
+# Mon Nov  3 10:10:30 2008
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+# CONFIG_GENERIC_TIME is not set
+# CONFIG_GENERIC_CLOCKEVENTS is not set
+CONFIG_MMU=y
+CONFIG_NO_IOPORT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+# CONFIG_SYSVIPC is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+CONFIG_LBD=y
+# CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_LSF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+CONFIG_ARCH_S3C64XX=y
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM is not set
+CONFIG_PLAT_S3C64XX=y
+CONFIG_CPU_S3C6400_INIT=y
+CONFIG_CPU_S3C6400_CLOCK=y
+CONFIG_S3C64XX_SETUP_I2C0=y
+CONFIG_S3C64XX_SETUP_I2C1=y
+CONFIG_PLAT_S3C=y
+
+#
+# Boot options
+#
+CONFIG_S3C_BOOT_ERROR_RESET=y
+
+#
+# Power management
+#
+CONFIG_S3C_LOWLEVEL_UART_PORT=0
+CONFIG_S3C_GPIO_SPACE=0
+CONFIG_S3C_GPIO_TRACK=y
+CONFIG_S3C_GPIO_PULL_UPDOWN=y
+CONFIG_S3C_GPIO_CFG_S3C24XX=y
+CONFIG_S3C_GPIO_CFG_S3C64XX=y
+CONFIG_S3C_DEV_HSMMC=y
+CONFIG_S3C_DEV_HSMMC1=y
+CONFIG_S3C_DEV_I2C1=y
+CONFIG_CPU_S3C6410=y
+CONFIG_S3C6410_SETUP_SDHCI=y
+CONFIG_MACH_SMDK6410=y
+CONFIG_SMDK6410_SD_CH0=y
+# CONFIG_SMDK6410_SD_CH1 is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_V6=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_32v6=y
+CONFIG_CPU_ABRT_EV6=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_V6=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V6=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+CONFIG_ARM_VIC=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_CMDLINE="console=ttySAC0,115200 root=/dev/ram init=/bin/bash initrd=0x51000000,4M"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_VFP=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+# CONFIG_SERIAL_8250_CONSOLE is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SAMSUNG=y
+CONFIG_SERIAL_SAMSUNG_UARTS=4
+# CONFIG_SERIAL_SAMSUNG_DEBUG is not set
+CONFIG_SERIAL_SAMSUNG_CONSOLE=y
+CONFIG_SERIAL_S3C6400=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_S3C2410=y
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+CONFIG_AT24=y
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+CONFIG_HID_DEBUG=y
+# CONFIG_HIDRAW is not set
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_COMPAT is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+
+#
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+# CONFIG_USB_GADGET is not set
+CONFIG_MMC=y
+CONFIG_MMC_DEBUG=y
+CONFIG_MMC_UNSAFE_RESUME=y
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+CONFIG_SDIO_UART=y
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_S3C=y
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+
+#
+# Voltage and Current regulators
+#
+# CONFIG_REGULATOR is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+CONFIG_GENERIC_ACL=y
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_DEBUG_PI_LIST=y
+# CONFIG_RT_MUTEX_TESTER is not set
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+CONFIG_DEBUG_S3C_PORT=y
+CONFIG_DEBUG_S3C_UART=0
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y

arch/arm/include/asm/hardware/vic.h

@@ -29,15 +29,17 @@
 #define VIC_INT_SOFT			0x18
 #define VIC_INT_SOFT_CLEAR		0x1c
 #define VIC_PROTECT			0x20
-#define VIC_VECT_ADDR			0x30
-#define VIC_DEF_VECT_ADDR		0x34
+#define VIC_PL190_VECT_ADDR		0x30	/* PL190 only */
+#define VIC_PL190_DEF_VECT_ADDR		0x34	/* PL190 only */
 
-#define VIC_VECT_ADDR0			0x100	/* 0 to 15 */
-#define VIC_VECT_CNTL0			0x200	/* 0 to 15 */
+#define VIC_VECT_ADDR0			0x100	/* 0 to 15 (0..31 PL192) */
+#define VIC_VECT_CNTL0			0x200	/* 0 to 15 (0..31 PL192) */
 #define VIC_ITCR			0x300	/* VIC test control register */
 
 #define VIC_VECT_CNTL_ENABLE		(1 << 5)
 
+#define VIC_PL192_VECT_ADDR		0xF00
+
 #ifndef __ASSEMBLY__
 void vic_init(void __iomem *base, unsigned int irq_start, u32 vic_sources);
 #endif

arch/arm/mach-s3c2410/Kconfig

@@ -33,11 +33,6 @@ config S3C2410_GPIO
 	help
 	  GPIO code for S3C2410 and similar processors
 
-config S3C2410_CLOCK
-	bool
-	help
-	  Clock code for the S3C2410, and similar processors
-
 config SIMTEC_NOR
 	bool
 	help
@@ -85,6 +80,7 @@ config ARCH_BAST
 	select PM_SIMTEC if PM
 	select SIMTEC_NOR
 	select MACH_BAST_IDE
+	select S3C24XX_DCLK
 	select ISA
 	help
 	  Say Y here if you are using the Simtec Electronics EB2410ITX
@@ -122,6 +118,7 @@ config MACH_TCT_HAMMER
 config MACH_VR1000
 	bool "Thorcom VR1000"
 	select PM_SIMTEC if PM
+	select S3C24XX_DCLK
 	select SIMTEC_NOR
 	select MACH_BAST_IDE
 	select CPU_S3C2410

arch/arm/mach-s3c2410/Makefile

@@ -15,7 +15,6 @@ obj-$(CONFIG_CPU_S3C2410_DMA)	+= dma.o
 obj-$(CONFIG_CPU_S3C2410_DMA)	+= dma.o
 obj-$(CONFIG_S3C2410_PM)	+= pm.o sleep.o
 obj-$(CONFIG_S3C2410_GPIO)	+= gpio.o
-obj-$(CONFIG_S3C2410_CLOCK)	+= clock.o
 
 # Machine support
 

arch/arm/mach-s3c2410/include/mach/gpio-core.h

@@ -0,0 +1,34 @@
+/* arch/arm/mach-s3c24100/include/mach/gpio-core.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C2410 - GPIO core support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_GPIO_CORE_H
+#define __ASM_ARCH_GPIO_CORE_H __FILE__
+
+#include <plat/gpio-core.h>
+#include <mach/regs-gpio.h>
+
+extern struct s3c_gpio_chip s3c24xx_gpios[];
+
+static inline struct s3c_gpio_chip *s3c_gpiolib_getchip(unsigned int pin)
+{
+	struct s3c_gpio_chip *chip;
+
+	if (pin > S3C2410_GPG10)
+		return NULL;
+
+	chip = &s3c24xx_gpios[pin/32];
+	return (S3C2410_GPIO_OFFSET(pin) > chip->chip.ngpio) ? chip : NULL;
+}
+
+#endif /* __ASM_ARCH_GPIO_CORE_H */

arch/arm/mach-s3c2410/include/mach/gpio.h

@@ -15,4 +15,10 @@
 #define gpio_set_value	__gpio_set_value
 #define gpio_cansleep	__gpio_cansleep
 
+/* some boards require extra gpio capacity to support external
+ * devices that need GPIO.
+ */
+
+#define ARCH_NR_GPIOS	(256 + CONFIG_S3C24XX_GPIO_EXTRA)
+
 #include <asm-generic/gpio.h>

arch/arm/mach-s3c2410/include/mach/irqs.h

@@ -134,6 +134,8 @@
 #define IRQ_S3C2443_HSMMC	S3C2410_IRQ(20)		/* IRQ_SDI */
 #define IRQ_S3C2443_NAND	S3C2410_IRQ(24)		/* reserved */
 
+#define IRQ_HSMMC0		IRQ_S3C2443_HSMMC
+
 #define IRQ_S3C2443_LCD1	S3C2410_IRQSUB(14)
 #define IRQ_S3C2443_LCD2	S3C2410_IRQSUB(15)
 #define IRQ_S3C2443_LCD3	S3C2410_IRQSUB(16)
@@ -160,6 +162,12 @@
 #define NR_IRQS (IRQ_S3C2440_AC97+1)
 #endif
 
+/* compatibility define. */
+#define IRQ_UART3		IRQ_S3C2443_UART3
+#define IRQ_S3CUART_RX3		IRQ_S3C2443_RX3
+#define IRQ_S3CUART_TX3		IRQ_S3C2443_TX3
+#define IRQ_S3CUART_ERR3	IRQ_S3C2443_ERR3
+
 /* Our FIQs are routable from IRQ_EINT0 to IRQ_ADCPARENT */
 #define FIQ_START		IRQ_EINT0
 

arch/arm/mach-s3c2410/include/mach/map.h

@@ -13,34 +13,20 @@
 #ifndef __ASM_ARCH_MAP_H
 #define __ASM_ARCH_MAP_H
 
+#include <plat/map-base.h>
 #include <plat/map.h>
 
 #define S3C2410_ADDR(x)		S3C_ADDR(x)
 
-/* interrupt controller is the first thing we put in, to make
- * the assembly code for the irq detection easier
- */
-#define S3C24XX_VA_IRQ	   S3C_VA_IRQ
-#define S3C2410_PA_IRQ	   (0x4A000000)
-#define S3C24XX_SZ_IRQ	   SZ_1M
-
-/* memory controller registers */
-#define S3C24XX_VA_MEMCTRL S3C_VA_MEM
-#define S3C2410_PA_MEMCTRL (0x48000000)
-#define S3C24XX_SZ_MEMCTRL SZ_1M
-
 /* USB host controller */
 #define S3C2410_PA_USBHOST (0x49000000)
-#define S3C24XX_SZ_USBHOST SZ_1M
 
 /* DMA controller */
 #define S3C2410_PA_DMA	   (0x4B000000)
 #define S3C24XX_SZ_DMA	   SZ_1M
 
 /* Clock and Power management */
-#define S3C24XX_VA_CLKPWR  S3C_VA_SYS
 #define S3C2410_PA_CLKPWR  (0x4C000000)
-#define S3C24XX_SZ_CLKPWR  SZ_1M
 
 /* LCD controller */
 #define S3C2410_PA_LCD	   (0x4D000000)
@@ -48,48 +34,12 @@
 
 /* NAND flash controller */
 #define S3C2410_PA_NAND	   (0x4E000000)
-#define S3C24XX_SZ_NAND	   SZ_1M
-
-/* UARTs */
-#define S3C24XX_VA_UART	   S3C_VA_UART
-#define S3C2410_PA_UART	   (0x50000000)
-#define S3C24XX_SZ_UART	   SZ_1M
-
-/* Timers */
-#define S3C24XX_VA_TIMER   S3C_VA_TIMER
-#define S3C2410_PA_TIMER   (0x51000000)
-#define S3C24XX_SZ_TIMER   SZ_1M
-
-/* USB Device port */
-#define S3C2410_PA_USBDEV  (0x52000000)
-#define S3C24XX_SZ_USBDEV  SZ_1M
-
-/* Watchdog */
-#define S3C24XX_VA_WATCHDOG S3C_VA_WATCHDOG
-#define S3C2410_PA_WATCHDOG (0x53000000)
-#define S3C24XX_SZ_WATCHDOG SZ_1M
 
 /* IIC hardware controller */
 #define S3C2410_PA_IIC	   (0x54000000)
-#define S3C24XX_SZ_IIC	   SZ_1M
 
 /* IIS controller */
 #define S3C2410_PA_IIS	   (0x55000000)
-#define S3C24XX_SZ_IIS	   SZ_1M
-
-/* GPIO ports */
-
-/* the calculation for the VA of this must ensure that
- * it is the same distance apart from the UART in the
- * phsyical address space, as the initial mapping for the IO
- * is done as a 1:1 maping. This puts it (currently) at
- * 0xFA800000, which is not in the way of any current mapping
- * by the base system.
-*/
-
-#define S3C2410_PA_GPIO	   (0x56000000)
-#define S3C24XX_VA_GPIO	   ((S3C2410_PA_GPIO - S3C24XX_PA_UART) + S3C24XX_VA_UART)
-#define S3C24XX_SZ_GPIO	   SZ_1M
 
 /* RTC */
 #define S3C2410_PA_RTC	   (0x57000000)
@@ -97,15 +47,12 @@
 
 /* ADC */
 #define S3C2410_PA_ADC	   (0x58000000)
-#define S3C24XX_SZ_ADC	   SZ_1M
 
 /* SPI */
 #define S3C2410_PA_SPI	   (0x59000000)
-#define S3C24XX_SZ_SPI	   SZ_1M
 
 /* SDI */
 #define S3C2410_PA_SDI	   (0x5A000000)
-#define S3C24XX_SZ_SDI	   SZ_1M
 
 /* CAMIF */
 #define S3C2440_PA_CAMIF   (0x4F000000)
@@ -120,13 +67,6 @@
 #define S3C2443_PA_HSMMC   (0x4A800000)
 #define S3C2443_SZ_HSMMC   (256)
 
-/* ISA style IO, for each machine to sort out mappings for, if it
- * implements it. We reserve two 16M regions for ISA.
- */
-
-#define S3C24XX_VA_ISA_WORD  S3C2410_ADDR(0x02000000)
-#define S3C24XX_VA_ISA_BYTE  S3C2410_ADDR(0x03000000)
-
 /* physical addresses of all the chip-select areas */
 
 #define S3C2410_CS0 (0x00000000)
@@ -152,27 +92,16 @@
 #define S3C24XX_PA_TIMER    S3C2410_PA_TIMER
 #define S3C24XX_PA_USBDEV   S3C2410_PA_USBDEV
 #define S3C24XX_PA_WATCHDOG S3C2410_PA_WATCHDOG
-#define S3C24XX_PA_IIC      S3C2410_PA_IIC
 #define S3C24XX_PA_IIS      S3C2410_PA_IIS
 #define S3C24XX_PA_GPIO     S3C2410_PA_GPIO
 #define S3C24XX_PA_RTC      S3C2410_PA_RTC
 #define S3C24XX_PA_ADC      S3C2410_PA_ADC
 #define S3C24XX_PA_SPI      S3C2410_PA_SPI
+#define S3C24XX_PA_SDI      S3C2410_PA_SDI
+#define S3C24XX_PA_NAND	    S3C2410_PA_NAND
 
-/* deal with the registers that move under the 2412/2413 */
-
-#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413)
-#ifndef __ASSEMBLY__
-extern void __iomem *s3c24xx_va_gpio2;
-#endif
-#ifdef CONFIG_CPU_S3C2412_ONLY
-#define S3C24XX_VA_GPIO2 (S3C24XX_VA_GPIO + 0x10)
-#else
-#define S3C24XX_VA_GPIO2 s3c24xx_va_gpio2
-#endif
-#else
-#define s3c24xx_va_gpio2 S3C24XX_VA_GPIO
-#define S3C24XX_VA_GPIO2 S3C24XX_VA_GPIO
-#endif
+#define S3C_PA_IIC          S3C2410_PA_IIC
+#define S3C_PA_UART	    S3C24XX_PA_UART
+#define S3C_PA_HSMMC0	    S3C2443_PA_HSMMC
 
 #endif /* __ASM_ARCH_MAP_H */

arch/arm/mach-s3c2410/include/mach/regs-clock.h

@@ -42,13 +42,6 @@
 #define S3C2410_CLKCON_IIS	     (1<<17)
 #define S3C2410_CLKCON_SPI	     (1<<18)
 
-#define S3C2410_PLLCON_MDIVSHIFT     12
-#define S3C2410_PLLCON_PDIVSHIFT     4
-#define S3C2410_PLLCON_SDIVSHIFT     0
-#define S3C2410_PLLCON_MDIVMASK	     ((1<<(1+(19-12)))-1)
-#define S3C2410_PLLCON_PDIVMASK	     ((1<<5)-1)
-#define S3C2410_PLLCON_SDIVMASK	     3
-
 /* DCLKCON register addresses in gpio.h */
 
 #define S3C2410_DCLKCON_DCLK0EN	     (1<<0)
@@ -76,32 +69,6 @@
 #define S3C2410_CLKSLOW_SLOWVAL(x)	(x)
 #define S3C2410_CLKSLOW_GET_SLOWVAL(x)	((x) & 7)
 
-#ifndef __ASSEMBLY__
-
-#include <asm/div64.h>
-
-static inline unsigned int
-s3c2410_get_pll(unsigned int pllval, unsigned int baseclk)
-{
-	unsigned int mdiv, pdiv, sdiv;
-	uint64_t fvco;
-
-	mdiv = pllval >> S3C2410_PLLCON_MDIVSHIFT;
-	pdiv = pllval >> S3C2410_PLLCON_PDIVSHIFT;
-	sdiv = pllval >> S3C2410_PLLCON_SDIVSHIFT;
-
-	mdiv &= S3C2410_PLLCON_MDIVMASK;
-	pdiv &= S3C2410_PLLCON_PDIVMASK;
-	sdiv &= S3C2410_PLLCON_SDIVMASK;
-
-	fvco = (uint64_t)baseclk * (mdiv + 8);
-	do_div(fvco, (pdiv + 2) << sdiv);
-
-	return (unsigned int)fvco;
-}
-
-#endif /* __ASSEMBLY__ */
-
 #if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442)
 
 /* extra registers */

arch/arm/mach-s3c2410/include/mach/regs-gpio.h

@@ -1053,13 +1053,6 @@
 #define S3C24XX_EXTINT1	   S3C24XX_GPIOREG2(0x8C)
 #define S3C24XX_EXTINT2	   S3C24XX_GPIOREG2(0x90)
 
-/* values for S3C2410_EXTINT0/1/2 */
-#define S3C2410_EXTINT_LOWLEV	 (0x00)
-#define S3C2410_EXTINT_HILEV	 (0x01)
-#define S3C2410_EXTINT_FALLEDGE	 (0x02)
-#define S3C2410_EXTINT_RISEEDGE	 (0x04)
-#define S3C2410_EXTINT_BOTHEDGE	 (0x06)
-
 /* interrupt filtering conrrol for EINT16..EINT23 */
 #define S3C2410_EINFLT0	   S3C2410_GPIOREG(0x94)
 #define S3C2410_EINFLT1	   S3C2410_GPIOREG(0x98)

arch/arm/mach-s3c2410/include/mach/spi.h

@@ -22,5 +22,12 @@ struct s3c2410_spi_info {
 	void (*set_cs)(struct s3c2410_spi_info *spi, int cs, int pol);
 };
 
+/* Standard setup / suspend routines for SPI GPIO pins. */
+
+extern void s3c24xx_spi_gpiocfg_bus0_gpe11_12_13(struct s3c2410_spi_info *spi,
+						 int enable);
+
+extern void s3c24xx_spi_gpiocfg_bus1_gpg5_6_7(struct s3c2410_spi_info *spi,
+					      int enable);
 
 #endif /* __ASM_ARCH_SPI_H */

arch/arm/mach-s3c2410/include/mach/tick.h

@@ -0,0 +1,15 @@
+/* linux/arch/arm/mach-s3c2410/include/mach/tick.h
+ *
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C2410 - timer tick support
+ */
+
+#define SRCPND_TIMER4 (1<<(IRQ_TIMER4 - IRQ_EINT0))
+
+static inline int s3c24xx_ostimer_pending(void)
+{
+	return __raw_readl(S3C2410_SRCPND) & SRCPND_TIMER4;
+}

arch/arm/mach-s3c2410/include/mach/uncompress.h

@@ -1,3 +1,4 @@
+
 /* arch/arm/mach-s3c2410/include/mach/uncompress.h
  *
  * Copyright (c) 2003, 2007 Simtec Electronics

arch/arm/mach-s3c2410/mach-amlm5900.c

@@ -52,6 +52,7 @@
 #include <mach/regs-lcd.h>
 #include <mach/regs-gpio.h>
 
+#include <plat/iic.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
 
@@ -150,7 +151,7 @@ static struct platform_device *amlm5900_devices[] __initdata = {
 #endif
 	&s3c_device_adc,
 	&s3c_device_wdt,
-	&s3c_device_i2c,
+	&s3c_device_i2c0,
 	&s3c_device_usb,
  	&s3c_device_rtc,
 	&s3c_device_usbgadget,
@@ -233,6 +234,7 @@ static void __init amlm5900_init(void)
 #ifdef CONFIG_FB_S3C2410
 	s3c24xx_fb_set_platdata(&amlm5900_fb_info);
 #endif
+	s3c_i2c0_set_platdata(NULL);
 	platform_add_devices(amlm5900_devices, ARRAY_SIZE(amlm5900_devices));
 }
 

arch/arm/mach-s3c2410/mach-bast.c

@@ -406,7 +406,7 @@ static struct platform_device bast_sio = {
  * standard 100KHz i2c bus frequency
 */
 
-static struct s3c2410_platform_i2c bast_i2c_info = {
+static struct s3c2410_platform_i2c __initdata bast_i2c_info = {
 	.flags		= 0,
 	.slave_addr	= 0x10,
 	.bus_freq	= 100*1000,
@@ -553,7 +553,7 @@ static struct platform_device *bast_devices[] __initdata = {
 	&s3c_device_usb,
 	&s3c_device_lcd,
 	&s3c_device_wdt,
-	&s3c_device_i2c,
+	&s3c_device_i2c0,
  	&s3c_device_rtc,
 	&s3c_device_nand,
 	&bast_device_dm9k,
@@ -588,7 +588,8 @@ static void __init bast_map_io(void)
 	s3c24xx_register_clocks(bast_clocks, ARRAY_SIZE(bast_clocks));
 
 	s3c_device_nand.dev.platform_data = &bast_nand_info;
-	s3c_device_i2c.dev.platform_data = &bast_i2c_info;
+
+	s3c_i2c0_set_platdata(&bast_i2c_info);
 
 	s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc));
 	s3c24xx_init_clocks(0);

arch/arm/mach-s3c2410/mach-h1940.c

@@ -39,10 +39,12 @@
 #include <mach/h1940-latch.h>
 #include <mach/fb.h>
 #include <plat/udc.h>
+#include <plat/iic.h>
 
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
+#include <plat/pll.h>
 #include <plat/pm.h>
 
 static struct map_desc h1940_iodesc[] __initdata = {
@@ -183,7 +185,7 @@ static struct platform_device *h1940_devices[] __initdata = {
 	&s3c_device_usb,
 	&s3c_device_lcd,
 	&s3c_device_wdt,
-	&s3c_device_i2c,
+	&s3c_device_i2c0,
 	&s3c_device_iis,
 	&s3c_device_usbgadget,
 	&s3c_device_leds,
@@ -215,6 +217,7 @@ static void __init h1940_init(void)
 
 	s3c24xx_fb_set_platdata(&h1940_fb_info);
  	s3c24xx_udc_set_platdata(&h1940_udc_cfg);
+	s3c_i2c0_set_platdata(NULL);
 
 	/* Turn off suspend on both USB ports, and switch the
 	 * selectable USB port to USB device mode. */
@@ -223,10 +226,9 @@ static void __init h1940_init(void)
 			      S3C2410_MISCCR_USBSUSPND0 |
 			      S3C2410_MISCCR_USBSUSPND1, 0x0);
 
-	tmp = (
-		 0x78 << S3C2410_PLLCON_MDIVSHIFT)
-	      | (0x02 << S3C2410_PLLCON_PDIVSHIFT)
-	      | (0x03 << S3C2410_PLLCON_SDIVSHIFT);
+	tmp =   (0x78 << S3C24XX_PLLCON_MDIVSHIFT)
+	      | (0x02 << S3C24XX_PLLCON_PDIVSHIFT)
+	      | (0x03 << S3C24XX_PLLCON_SDIVSHIFT);
 	writel(tmp, S3C2410_UPLLCON);
 
 	platform_add_devices(h1940_devices, ARRAY_SIZE(h1940_devices));

arch/arm/mach-s3c2410/mach-n30.c

@@ -17,7 +17,6 @@
 #include <linux/kernel.h>
 #include <linux/types.h>
 
-#include <linux/delay.h>
 #include <linux/gpio_keys.h>
 #include <linux/init.h>
 #include <linux/input.h>
@@ -320,7 +319,7 @@ static struct s3c2410fb_mach_info n30_fb_info __initdata = {
 static struct platform_device *n30_devices[] __initdata = {
 	&s3c_device_lcd,
 	&s3c_device_wdt,
-	&s3c_device_i2c,
+	&s3c_device_i2c0,
 	&s3c_device_iis,
 	&s3c_device_usb,
 	&s3c_device_usbgadget,
@@ -332,7 +331,7 @@ static struct platform_device *n30_devices[] __initdata = {
 static struct platform_device *n35_devices[] __initdata = {
 	&s3c_device_lcd,
 	&s3c_device_wdt,
-	&s3c_device_i2c,
+	&s3c_device_i2c0,
 	&s3c_device_iis,
 	&s3c_device_usbgadget,
 	&n35_button_device,
@@ -501,7 +500,7 @@ static void __init n30_init_irq(void)
 static void __init n30_init(void)
 {
 	s3c24xx_fb_set_platdata(&n30_fb_info);
-	s3c_device_i2c.dev.platform_data = &n30_i2ccfg;
+	s3c_device_i2c0.dev.platform_data = &n30_i2ccfg;
 	s3c24xx_udc_set_platdata(&n30_udc_cfg);
 
 	/* Turn off suspend on both USB ports, and switch the

arch/arm/mach-s3c2410/mach-otom.c

@@ -35,6 +35,7 @@
 #include <plat/s3c2410.h>
 #include <plat/clock.h>
 #include <plat/devs.h>
+#include <plat/iic.h>
 #include <plat/cpu.h>
 
 static struct map_desc otom11_iodesc[] __initdata = {
@@ -94,7 +95,7 @@ static struct platform_device *otom11_devices[] __initdata = {
 	&s3c_device_usb,
 	&s3c_device_lcd,
 	&s3c_device_wdt,
-	&s3c_device_i2c,
+	&s3c_device_i2c0,
 	&s3c_device_iis,
  	&s3c_device_rtc,
 	&otom_device_nor,
@@ -109,6 +110,7 @@ static void __init otom11_map_io(void)
 
 static void __init otom11_init(void)
 {
+	s3c_i2c0_set_platdata(NULL);
 	platform_add_devices(otom11_devices, ARRAY_SIZE(otom11_devices));
 }
 

arch/arm/mach-s3c2410/mach-qt2410.c

@@ -54,6 +54,7 @@
 #include <plat/udc.h>
 #include <mach/spi.h>
 #include <mach/spi-gpio.h>
+#include <plat/iic.h>
 
 #include <plat/common-smdk.h>
 #include <plat/devs.h>
@@ -247,7 +248,7 @@ static struct platform_device *qt2410_devices[] __initdata = {
 	&s3c_device_usb,
 	&s3c_device_lcd,
 	&s3c_device_wdt,
-	&s3c_device_i2c,
+	&s3c_device_i2c0,
 	&s3c_device_iis,
 	&s3c_device_sdi,
 	&s3c_device_usbgadget,
@@ -349,6 +350,7 @@ static void __init qt2410_machine_init(void)
 	s3c2410_gpio_setpin(S3C2410_GPB0, 1);
 
 	s3c24xx_udc_set_platdata(&qt2410_udc_cfg);
+	s3c_i2c0_set_platdata(NULL);
 
 	s3c2410_gpio_cfgpin(S3C2410_GPB5, S3C2410_GPIO_OUTPUT);
 

arch/arm/mach-s3c2410/mach-smdk2410.c

@@ -47,6 +47,7 @@
 #include <asm/mach-types.h>
 
 #include <plat/regs-serial.h>
+#include <plat/iic.h>
 
 #include <plat/devs.h>
 #include <plat/cpu.h>
@@ -89,7 +90,7 @@ static struct platform_device *smdk2410_devices[] __initdata = {
 	&s3c_device_usb,
 	&s3c_device_lcd,
 	&s3c_device_wdt,
-	&s3c_device_i2c,
+	&s3c_device_i2c0,
 	&s3c_device_iis,
 };
 
@@ -102,6 +103,7 @@ static void __init smdk2410_map_io(void)
 
 static void __init smdk2410_init(void)
 {
+	s3c_i2c0_set_platdata(NULL);
 	platform_add_devices(smdk2410_devices, ARRAY_SIZE(smdk2410_devices));
 	smdk_machine_init();
 }

arch/arm/mach-s3c2410/mach-tct_hammer.c

@@ -45,6 +45,7 @@
 #include <asm/mach-types.h>
 
 #include <plat/regs-serial.h>
+#include <plat/iic.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
 
@@ -127,7 +128,7 @@ static struct s3c2410_uartcfg tct_hammer_uartcfgs[] = {
 static struct platform_device *tct_hammer_devices[] __initdata = {
 	&s3c_device_adc,
 	&s3c_device_wdt,
-	&s3c_device_i2c,
+	&s3c_device_i2c0,
 	&s3c_device_usb,
 	&s3c_device_rtc,
 	&s3c_device_usbgadget,
@@ -146,6 +147,7 @@ static void __init tct_hammer_map_io(void)
 
 static void __init tct_hammer_init(void)
 {
+	s3c_i2c0_set_platdata(NULL);
 	platform_add_devices(tct_hammer_devices, ARRAY_SIZE(tct_hammer_devices));
 }
 

arch/arm/mach-s3c2410/mach-vr1000.c

@@ -47,6 +47,7 @@
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
+#include <plat/iic.h>
 
 #include "usb-simtec.h"
 #include "nor-simtec.h"
@@ -334,7 +335,7 @@ static struct platform_device *vr1000_devices[] __initdata = {
 	&s3c_device_usb,
 	&s3c_device_lcd,
 	&s3c_device_wdt,
-	&s3c_device_i2c,
+	&s3c_device_i2c0,
 	&s3c_device_adc,
 	&serial_device,
 	&vr1000_dm9k0,
@@ -384,6 +385,7 @@ static void __init vr1000_map_io(void)
 
 static void __init vr1000_init(void)
 {
+	s3c_i2c0_set_platdata(NULL);
 	platform_add_devices(vr1000_devices, ARRAY_SIZE(vr1000_devices));
 
 	i2c_register_board_info(0, vr1000_i2c_devs,

arch/arm/mach-s3c2410/s3c2410.c

@@ -16,6 +16,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/init.h>
+#include <linux/clk.h>
 #include <linux/sysdev.h>
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
@@ -28,6 +29,8 @@
 #include <mach/hardware.h>
 #include <asm/irq.h>
 
+#include <plat/cpu-freq.h>
+
 #include <mach/regs-clock.h>
 #include <plat/regs-serial.h>
 
@@ -35,6 +38,7 @@
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/clock.h>
+#include <plat/pll.h>
 
 /* Initial IO mappings */
 
@@ -59,25 +63,28 @@ void __init s3c2410_init_uarts(struct s3c2410_uartcfg *cfg, int no)
  * machine specific initialisation.
 */
 
-void __init s3c2410_map_io(struct map_desc *mach_desc, int mach_size)
+void __init s3c2410_map_io(void)
 {
-	/* register our io-tables */
-
 	iotable_init(s3c2410_iodesc, ARRAY_SIZE(s3c2410_iodesc));
-	iotable_init(mach_desc, mach_size);
 }
 
-void __init s3c2410_init_clocks(int xtal)
+void __init_or_cpufreq s3c2410_setup_clocks(void)
 {
+	struct clk *xtal_clk;
 	unsigned long tmp;
+	unsigned long xtal;
 	unsigned long fclk;
 	unsigned long hclk;
 	unsigned long pclk;
 
+	xtal_clk = clk_get(NULL, "xtal");
+	xtal = clk_get_rate(xtal_clk);
+	clk_put(xtal_clk);
+
 	/* now we've got our machine bits initialised, work out what
 	 * clocks we've got */
 
-	fclk = s3c2410_get_pll(__raw_readl(S3C2410_MPLLCON), xtal);
+	fclk = s3c24xx_get_pll(__raw_readl(S3C2410_MPLLCON), xtal);
 
 	tmp = __raw_readl(S3C2410_CLKDIVN);
 
@@ -95,7 +102,13 @@ void __init s3c2410_init_clocks(int xtal)
 	 * console to use them
 	 */
 
-	s3c24xx_setup_clocks(xtal, fclk, hclk, pclk);
+	s3c24xx_setup_clocks(fclk, hclk, pclk);
+}
+
+void __init s3c2410_init_clocks(int xtal)
+{
+	s3c24xx_register_baseclocks(xtal);
+	s3c2410_setup_clocks();
 	s3c2410_baseclk_add();
 }
 

arch/arm/mach-s3c2412/clock.c

@@ -93,12 +93,6 @@ static int s3c2412_upll_enable(struct clk *clk, int enable)
 
 /* clock selections */
 
-/* CPU EXTCLK input */
-static struct clk clk_ext = {
-	.name		= "extclk",
-	.id		= -1,
-};
-
 static struct clk clk_erefclk = {
 	.name		= "erefclk",
 	.id		= -1,
@@ -773,5 +767,6 @@ int __init s3c2412_baseclk_add(void)
 		s3c2412_clkcon_enable(clkp, 0);
 	}
 
+	s3c_pwmclk_init();
 	return 0;
 }

arch/arm/mach-s3c2412/mach-jive.c

@@ -17,7 +17,6 @@
 #include <linux/timer.h>
 #include <linux/init.h>
 #include <linux/sysdev.h>
-#include <linux/delay.h>
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
 #include <linux/i2c.h>
@@ -53,6 +52,7 @@
 #include <plat/cpu.h>
 #include <plat/pm.h>
 #include <plat/udc.h>
+#include <plat/iic.h>
 
 static struct map_desc jive_iodesc[] __initdata = {
 };
@@ -398,11 +398,12 @@ static struct s3c2410_spigpio_info jive_lcd_spi = {
 	.bus_num	= 1,
 	.pin_clk	= S3C2410_GPG8,
 	.pin_mosi	= S3C2410_GPB8,
+	.num_chipselect	= 1,
 	.chip_select	= jive_lcd_spi_chipselect,
 };
 
 static struct platform_device jive_device_lcdspi = {
-	.name		= "s3c24xx-spi-gpio",
+	.name		= "spi_s3c24xx_gpio",
 	.id		= 1,
 	.num_resources  = 0,
 	.dev.platform_data = &jive_lcd_spi,
@@ -419,11 +420,12 @@ static struct s3c2410_spigpio_info jive_wm8750_spi = {
 	.bus_num	= 2,
 	.pin_clk	= S3C2410_GPB4,
 	.pin_mosi	= S3C2410_GPB9,
+	.num_chipselect	= 1,
 	.chip_select	= jive_wm8750_chipselect,
 };
 
 static struct platform_device jive_device_wm8750 = {
-	.name		= "s3c24xx-spi-gpio",
+	.name		= "spi_s3c24xx_gpio",
 	.id		= 2,
 	.num_resources  = 0,
 	.dev.platform_data = &jive_wm8750_spi,
@@ -450,14 +452,14 @@ static struct spi_board_info __initdata jive_spi_devs[] = {
 
 /* I2C bus and device configuration. */
 
-static struct s3c2410_platform_i2c jive_i2c_cfg = {
+static struct s3c2410_platform_i2c jive_i2c_cfg __initdata = {
 	.max_freq	= 80 * 1000,
 	.bus_freq	= 50 * 1000,
 	.flags		= S3C_IICFLG_FILTER,
 	.sda_delay	= 2,
 };
 
-static struct i2c_board_info jive_i2c_devs[] = {
+static struct i2c_board_info jive_i2c_devs[] __initdata = {
 	[0] = {
 		I2C_BOARD_INFO("lis302dl", 0x1c),
 		.irq	= IRQ_EINT14,
@@ -470,7 +472,7 @@ static struct platform_device *jive_devices[] __initdata = {
 	&s3c_device_usb,
 	&s3c_device_rtc,
 	&s3c_device_wdt,
-	&s3c_device_i2c,
+	&s3c_device_i2c0,
 	&s3c_device_lcd,
 	&jive_device_lcdspi,
 	&jive_device_wm8750,
@@ -663,7 +665,7 @@ static void __init jive_machine_init(void)
 
 	spi_register_board_info(jive_spi_devs, ARRAY_SIZE(jive_spi_devs));
 
-	s3c_device_i2c.dev.platform_data = &jive_i2c_cfg;
+	s3c_i2c0_set_platdata(&jive_i2c_cfg);
 	i2c_register_board_info(0, jive_i2c_devs, ARRAY_SIZE(jive_i2c_devs));
 
 	pm_power_off = jive_power_off;

arch/arm/mach-s3c2412/mach-smdk2413.c

@@ -38,6 +38,7 @@
 
 #include <mach/idle.h>
 #include <plat/udc.h>
+#include <plat/iic.h>
 #include <mach/fb.h>
 
 #include <plat/s3c2410.h>
@@ -105,7 +106,7 @@ static struct platform_device *smdk2413_devices[] __initdata = {
 	&s3c_device_usb,
 	//&s3c_device_lcd,
 	&s3c_device_wdt,
-	&s3c_device_i2c,
+	&s3c_device_i2c0,
 	&s3c_device_iis,
 	&s3c_device_usbgadget,
 };
@@ -142,6 +143,7 @@ static void __init smdk2413_machine_init(void)
 
 
  	s3c24xx_udc_set_platdata(&smdk2413_udc_cfg);
+	s3c_i2c0_set_platdata(NULL);
 
 	platform_add_devices(smdk2413_devices, ARRAY_SIZE(smdk2413_devices));
 	smdk_machine_init();

arch/arm/mach-s3c2412/mach-vstms.c

@@ -39,6 +39,7 @@
 #include <mach/idle.h>
 #include <mach/fb.h>
 
+#include <plat/iic.h>
 #include <plat/nand.h>
 
 #include <plat/s3c2410.h>
@@ -122,7 +123,7 @@ static struct s3c2410_platform_nand vstms_nand_info = {
 static struct platform_device *vstms_devices[] __initdata = {
 	&s3c_device_usb,
 	&s3c_device_wdt,
-	&s3c_device_i2c,
+	&s3c_device_i2c0,
 	&s3c_device_iis,
 	&s3c_device_rtc,
 	&s3c_device_nand,
@@ -151,6 +152,7 @@ static void __init vstms_map_io(void)
 
 static void __init vstms_init(void)
 {
+	s3c_i2c0_set_platdata(NULL);
 	platform_add_devices(vstms_devices, ARRAY_SIZE(vstms_devices));
 }
 

arch/arm/mach-s3c2412/s3c2412.c

@@ -16,6 +16,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/init.h>
+#include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/sysdev.h>
 #include <linux/serial_core.h>
@@ -33,6 +34,8 @@
 #include <mach/reset.h>
 #include <mach/idle.h>
 
+#include <plat/cpu-freq.h>
+
 #include <mach/regs-clock.h>
 #include <plat/regs-serial.h>
 #include <mach/regs-power.h>
@@ -47,6 +50,7 @@
 #include <plat/devs.h>
 #include <plat/clock.h>
 #include <plat/pm.h>
+#include <plat/pll.h>
 
 #ifndef CONFIG_CPU_S3C2412_ONLY
 void __iomem *s3c24xx_va_gpio2 = S3C24XX_VA_GPIO;
@@ -136,7 +140,7 @@ static void s3c2412_hard_reset(void)
  * machine specific initialisation.
 */
 
-void __init s3c2412_map_io(struct map_desc *mach_desc, int mach_size)
+void __init s3c2412_map_io(void)
 {
 	/* move base of IO */
 
@@ -153,20 +157,25 @@ void __init s3c2412_map_io(struct map_desc *mach_desc, int mach_size)
 	/* register our io-tables */
 
 	iotable_init(s3c2412_iodesc, ARRAY_SIZE(s3c2412_iodesc));
-	iotable_init(mach_desc, mach_size);
 }
 
-void __init s3c2412_init_clocks(int xtal)
+void __init_or_cpufreq s3c2412_setup_clocks(void)
 {
+	struct clk *xtal_clk;
 	unsigned long tmp;
+	unsigned long xtal;
 	unsigned long fclk;
 	unsigned long hclk;
 	unsigned long pclk;
 
+	xtal_clk = clk_get(NULL, "xtal");
+	xtal = clk_get_rate(xtal_clk);
+	clk_put(xtal_clk);
+
 	/* now we've got our machine bits initialised, work out what
 	 * clocks we've got */
 
-	fclk = s3c2410_get_pll(__raw_readl(S3C2410_MPLLCON), xtal*2);
+	fclk = s3c24xx_get_pll(__raw_readl(S3C2410_MPLLCON), xtal * 2);
 
 	clk_mpll.rate = fclk;
 
@@ -183,11 +192,17 @@ void __init s3c2412_init_clocks(int xtal)
 	printk("S3C2412: core %ld.%03ld MHz, memory %ld.%03ld MHz, peripheral %ld.%03ld MHz\n",
 	       print_mhz(fclk), print_mhz(hclk), print_mhz(pclk));
 
+	s3c24xx_setup_clocks(fclk, hclk, pclk);
+}
+
+void __init s3c2412_init_clocks(int xtal)
+{
 	/* initialise the clocks here, to allow other things like the
 	 * console to use them
 	 */
 
-	s3c24xx_setup_clocks(xtal, fclk, hclk, pclk);
+	s3c24xx_register_baseclocks(xtal);
+	s3c2412_setup_clocks();
 	s3c2412_baseclk_add();
 }
 

arch/arm/mach-s3c2440/Kconfig

@@ -29,8 +29,10 @@ menu "S3C2440 Machines"
 config MACH_ANUBIS
 	bool "Simtec Electronics ANUBIS"
 	select CPU_S3C2440
+	select S3C24XX_DCLK
 	select PM_SIMTEC if PM
 	select HAVE_PATA_PLATFORM
+	select S3C24XX_GPIO_EXTRA64
 	help
 	  Say Y here if you are using the Simtec Electronics ANUBIS
 	  development system
@@ -38,7 +40,9 @@ config MACH_ANUBIS
 config MACH_OSIRIS
 	bool "Simtec IM2440D20 (OSIRIS) module"
 	select CPU_S3C2440
+	select S3C24XX_DCLK
 	select PM_SIMTEC if PM
+	select S3C24XX_GPIO_EXTRA128
 	help
 	  Say Y here if you are using the Simtec IM2440D20 module, also
 	  known as the Osiris.

arch/arm/mach-s3c2440/mach-anubis.c

@@ -40,6 +40,7 @@
 #include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
 #include <plat/nand.h>
+#include <plat/iic.h>
 
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
@@ -366,6 +367,8 @@ static struct sm501_initdata anubis_sm501_initdata = {
 		.mask	= 0,
 	},
 
+	.devices	= SM501_USE_GPIO,
+
 	/* set the SDRAM and bus clocks */
 	.mclk		= 72 * MHZ,
 	.m1xclk		= 144 * MHZ,
@@ -373,10 +376,12 @@ static struct sm501_initdata anubis_sm501_initdata = {
 
 static struct sm501_platdata_gpio_i2c anubis_sm501_gpio_i2c[] = {
 	[0] = {
+		.bus_num	= 1,
 		.pin_scl	= 44,
 		.pin_sda	= 45,
 	},
 	[1] = {
+		.bus_num	= 2,
 		.pin_scl	= 40,
 		.pin_sda	= 41,
 	},
@@ -384,6 +389,7 @@ static struct sm501_platdata_gpio_i2c anubis_sm501_gpio_i2c[] = {
 
 static struct sm501_platdata anubis_sm501_platdata = {
 	.init		= &anubis_sm501_initdata,
+	.gpio_base	= -1,
 	.gpio_i2c	= anubis_sm501_gpio_i2c,
 	.gpio_i2c_nr	= ARRAY_SIZE(anubis_sm501_gpio_i2c),
 };
@@ -404,7 +410,7 @@ static struct platform_device *anubis_devices[] __initdata = {
 	&s3c_device_usb,
 	&s3c_device_wdt,
 	&s3c_device_adc,
-	&s3c_device_i2c,
+	&s3c_device_i2c0,
  	&s3c_device_rtc,
 	&s3c_device_nand,
 	&anubis_device_ide0,
@@ -468,6 +474,7 @@ static void __init anubis_map_io(void)
 
 static void __init anubis_init(void)
 {
+	s3c_i2c0_set_platdata(NULL);
 	platform_add_devices(anubis_devices, ARRAY_SIZE(anubis_devices));
 
 	i2c_register_board_info(0, anubis_i2c_devs,

arch/arm/mach-s3c2440/mach-at2440evb.c

@@ -28,6 +28,7 @@
 #include <asm/mach/irq.h>
 
 #include <mach/hardware.h>
+#include <mach/fb.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
@@ -36,6 +37,7 @@
 #include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
 #include <plat/nand.h>
+#include <plat/iic.h>
 
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
@@ -45,6 +47,7 @@
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
+#include <asm/plat-s3c24xx/mci.h>
 
 static struct map_desc at2440evb_iodesc[] __initdata = {
 	/* Nothing here */
@@ -162,19 +165,60 @@ static struct platform_device at2440evb_device_eth = {
 	},
 };
 
+static struct s3c24xx_mci_pdata at2440evb_mci_pdata = {
+	.gpio_detect	= S3C2410_GPG10,
+};
+
+/* 7" LCD panel */
+
+static struct s3c2410fb_display at2440evb_lcd_cfg __initdata = {
+
+	.lcdcon5	= S3C2410_LCDCON5_FRM565 |
+			  S3C2410_LCDCON5_INVVLINE |
+			  S3C2410_LCDCON5_INVVFRAME |
+			  S3C2410_LCDCON5_PWREN |
+			  S3C2410_LCDCON5_HWSWP,
+
+	.type		= S3C2410_LCDCON1_TFT,
+
+	.width		= 800,
+	.height		= 480,
+
+	.pixclock	= 33333, /* HCLK 60 MHz, divisor 2 */
+	.xres		= 800,
+	.yres		= 480,
+	.bpp		= 16,
+	.left_margin	= 88,
+	.right_margin	= 40,
+	.hsync_len	= 128,
+	.upper_margin	= 32,
+	.lower_margin	= 11,
+	.vsync_len	= 2,
+};
+
+static struct s3c2410fb_mach_info at2440evb_fb_info __initdata = {
+	.displays	= &at2440evb_lcd_cfg,
+	.num_displays	= 1,
+	.default_display = 0,
+};
+
 static struct platform_device *at2440evb_devices[] __initdata = {
 	&s3c_device_usb,
 	&s3c_device_wdt,
 	&s3c_device_adc,
-	&s3c_device_i2c,
+	&s3c_device_i2c0,
 	&s3c_device_rtc,
 	&s3c_device_nand,
+	&s3c_device_sdi,
+	&s3c_device_lcd,
 	&at2440evb_device_eth,
 };
 
 static void __init at2440evb_map_io(void)
 {
 	s3c_device_nand.dev.platform_data = &at2440evb_nand_info;
+	s3c_device_sdi.name = "s3c2440-sdi";
+	s3c_device_sdi.dev.platform_data = &at2440evb_mci_pdata;
 
 	s3c24xx_init_io(at2440evb_iodesc, ARRAY_SIZE(at2440evb_iodesc));
 	s3c24xx_init_clocks(16934400);
@@ -183,6 +227,9 @@ static void __init at2440evb_map_io(void)
 
 static void __init at2440evb_init(void)
 {
+	s3c24xx_fb_set_platdata(&at2440evb_fb_info);
+	s3c_i2c0_set_platdata(NULL);
+
 	platform_add_devices(at2440evb_devices, ARRAY_SIZE(at2440evb_devices));
 }
 

arch/arm/mach-s3c2440/mach-nexcoder.c

@@ -37,6 +37,7 @@
 //#include <asm/debug-ll.h>
 #include <mach/regs-gpio.h>
 #include <plat/regs-serial.h>
+#include <plat/iic.h>
 
 #include <plat/s3c2410.h>
 #include <plat/s3c2440.h>
@@ -107,7 +108,7 @@ static struct platform_device *nexcoder_devices[] __initdata = {
 	&s3c_device_usb,
 	&s3c_device_lcd,
 	&s3c_device_wdt,
-	&s3c_device_i2c,
+	&s3c_device_i2c0,
 	&s3c_device_iis,
  	&s3c_device_rtc,
 	&s3c_device_camif,
@@ -142,6 +143,7 @@ static void __init nexcoder_map_io(void)
 
 static void __init nexcoder_init(void)
 {
+	s3c_i2c0_set_platdata(NULL);
 	platform_add_devices(nexcoder_devices, ARRAY_SIZE(nexcoder_devices));
 };
 

arch/arm/mach-s3c2440/mach-osiris.c

@@ -38,6 +38,7 @@
 #include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
 #include <plat/nand.h>
+#include <plat/iic.h>
 
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
@@ -335,7 +336,7 @@ static struct i2c_board_info osiris_i2c_devs[] __initdata = {
 /* Standard Osiris devices */
 
 static struct platform_device *osiris_devices[] __initdata = {
-	&s3c_device_i2c,
+	&s3c_device_i2c0,
 	&s3c_device_wdt,
 	&s3c_device_nand,
 	&osiris_pcmcia,
@@ -398,6 +399,8 @@ static void __init osiris_init(void)
 	sysdev_class_register(&osiris_pm_sysclass);
 	sysdev_register(&osiris_pm_sysdev);
 
+	s3c_i2c0_set_platdata(NULL);
+
 	i2c_register_board_info(0, osiris_i2c_devs,
 				ARRAY_SIZE(osiris_i2c_devs));
 

arch/arm/mach-s3c2440/mach-rx3715.c

@@ -179,7 +179,7 @@ static struct platform_device *rx3715_devices[] __initdata = {
 	&s3c_device_usb,
 	&s3c_device_lcd,
 	&s3c_device_wdt,
-	&s3c_device_i2c,
+	&s3c_device_i2c0,
 	&s3c_device_iis,
 	&s3c_device_nand,
 };

arch/arm/mach-s3c2440/mach-smdk2440.c

@@ -37,6 +37,7 @@
 
 #include <mach/idle.h>
 #include <mach/fb.h>
+#include <plat/iic.h>
 
 #include <plat/s3c2410.h>
 #include <plat/s3c2440.h>
@@ -152,7 +153,7 @@ static struct platform_device *smdk2440_devices[] __initdata = {
 	&s3c_device_usb,
 	&s3c_device_lcd,
 	&s3c_device_wdt,
-	&s3c_device_i2c,
+	&s3c_device_i2c0,
 	&s3c_device_iis,
 };
 
@@ -166,6 +167,7 @@ static void __init smdk2440_map_io(void)
 static void __init smdk2440_machine_init(void)
 {
 	s3c24xx_fb_set_platdata(&smdk2440_fb_info);
+	s3c_i2c0_set_platdata(NULL);
 
 	platform_add_devices(smdk2440_devices, ARRAY_SIZE(smdk2440_devices));
 	smdk_machine_init();

arch/arm/mach-s3c2443/Kconfig

@@ -24,6 +24,7 @@ config MACH_SMDK2443
 	bool "SMDK2443"
 	select CPU_S3C2443
 	select MACH_SMDK
+	select S3C_DEV_HSMMC
 	help
 	  Say Y here if you are using an SMDK2443
 

arch/arm/mach-s3c2443/clock.c

@@ -29,7 +29,6 @@
 #include <linux/sysdev.h>
 #include <linux/clk.h>
 #include <linux/mutex.h>
-#include <linux/delay.h>
 #include <linux/serial_core.h>
 #include <linux/io.h>
 
@@ -39,6 +38,8 @@
 
 #include <mach/regs-s3c2443-clock.h>
 
+#include <plat/cpu-freq.h>
+
 #include <plat/s3c2443.h>
 #include <plat/clock.h>
 #include <plat/cpu.h>
@@ -145,12 +146,6 @@ static unsigned long s3c2443_roundrate_clksrc256(struct clk *clk,
 
 /* clock selections */
 
-/* CPU EXTCLK input */
-static struct clk clk_ext = {
-	.name		= "ext",
-	.id		= -1,
-};
-
 static struct clk clk_mpllref = {
 	.name		= "mpllref",
 	.parent		= &clk_xtal,
@@ -165,14 +160,6 @@ static struct clk clk_mpll = {
 };
 #endif
 
-static struct clk clk_epllref;
-
-static struct clk clk_epll = {
-	.name		= "epll",
-	.parent		= &clk_epllref,
-	.id		= -1,
-};
-
 static struct clk clk_i2s_ext = {
 	.name		= "i2s-ext",
 	.id		= -1,
@@ -1011,22 +998,20 @@ static struct clk *clks[] __initdata = {
 	&clk_prediv,
 };
 
-void __init s3c2443_init_clocks(int xtal)
+void __init_or_cpufreq s3c2443_setup_clocks(void)
 {
-	unsigned long epllcon = __raw_readl(S3C2443_EPLLCON);
 	unsigned long mpllcon = __raw_readl(S3C2443_MPLLCON);
 	unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0);
+	struct clk *xtal_clk;
+	unsigned long xtal;
 	unsigned long pll;
 	unsigned long fclk;
 	unsigned long hclk;
 	unsigned long pclk;
-	struct clk *clkp;
-	int ret;
-	int ptr;
 
-	/* s3c2443 parents h and p clocks from prediv */
-	clk_h.parent = &clk_prediv;
-	clk_p.parent = &clk_prediv;
+	xtal_clk = clk_get(NULL, "xtal");
+	xtal = clk_get_rate(xtal_clk);
+	clk_put(xtal_clk);
 
 	pll = s3c2443_get_mpll(mpllcon, xtal);
 	clk_msysclk.rate = pll;
@@ -1036,13 +1021,29 @@ void __init s3c2443_init_clocks(int xtal)
 	hclk /= s3c2443_get_hdiv(clkdiv0);
  	pclk = hclk / ((clkdiv0 & S3C2443_CLKDIV0_HALF_PCLK) ? 2 : 1);
 
-	s3c24xx_setup_clocks(xtal, fclk, hclk, pclk);
+	s3c24xx_setup_clocks(fclk, hclk, pclk);
 
 	printk("S3C2443: mpll %s %ld.%03ld MHz, cpu %ld.%03ld MHz, mem %ld.%03ld MHz, pclk %ld.%03ld MHz\n",
 	       (mpllcon & S3C2443_PLLCON_OFF) ? "off":"on",
 	       print_mhz(pll), print_mhz(fclk),
 	       print_mhz(hclk), print_mhz(pclk));
 
+	s3c24xx_setup_clocks(fclk, hclk, pclk);
+}
+
+void __init s3c2443_init_clocks(int xtal)
+{
+	struct clk *clkp;
+	unsigned long epllcon = __raw_readl(S3C2443_EPLLCON);
+	int ret;
+	int ptr;
+
+	/* s3c2443 parents h and p clocks from prediv */
+	clk_h.parent = &clk_prediv;
+	clk_p.parent = &clk_prediv;
+
+	s3c24xx_register_baseclocks(xtal);
+	s3c2443_setup_clocks();
 	s3c2443_clk_initparents();
 
 	for (ptr = 0; ptr < ARRAY_SIZE(clks); ptr++) {
@@ -1056,7 +1057,7 @@ void __init s3c2443_init_clocks(int xtal)
 	}
 
 	clk_epll.rate = s3c2443_get_epll(epllcon, xtal);
-
+	clk_epll.parent = &clk_epllref;
 	clk_usb_bus.parent = &clk_usb_bus_host;
 
 	/* ensure usb bus clock is within correct rate of 48MHz */
@@ -1105,4 +1106,6 @@ void __init s3c2443_init_clocks(int xtal)
 
 		(clkp->enable)(clkp, 0);
 	}
+
+	s3c_pwmclk_init();
 }

arch/arm/mach-s3c2443/mach-smdk2443.c

@@ -37,6 +37,7 @@
 
 #include <mach/idle.h>
 #include <mach/fb.h>
+#include <plat/iic.h>
 
 #include <plat/s3c2410.h>
 #include <plat/s3c2440.h>
@@ -103,8 +104,8 @@ static struct s3c2410_uartcfg smdk2443_uartcfgs[] __initdata = {
 
 static struct platform_device *smdk2443_devices[] __initdata = {
 	&s3c_device_wdt,
-	&s3c_device_i2c,
-	&s3c_device_hsmmc,
+	&s3c_device_i2c0,
+	&s3c_device_hsmmc0,
 };
 
 static void __init smdk2443_map_io(void)
@@ -116,6 +117,7 @@ static void __init smdk2443_map_io(void)
 
 static void __init smdk2443_machine_init(void)
 {
+	s3c_i2c0_set_platdata(NULL);
 	platform_add_devices(smdk2443_devices, ARRAY_SIZE(smdk2443_devices));
 	smdk_machine_init();
 }

arch/arm/mach-s3c2443/s3c2443.c

@@ -81,10 +81,9 @@ void __init s3c2443_init_uarts(struct s3c2410_uartcfg *cfg, int no)
  * machine specific initialisation.
  */
 
-void __init s3c2443_map_io(struct map_desc *mach_desc, int mach_size)
+void __init s3c2443_map_io(void)
 {
 	iotable_init(s3c2443_iodesc, ARRAY_SIZE(s3c2443_iodesc));
-	iotable_init(mach_desc, mach_size);
 }
 
 /* need to register class before we actually register the device, and

arch/arm/mach-s3c24a0/include/mach/debug-macro.S

@@ -0,0 +1,28 @@
+/* arch/arm/mach-s3c2410/include/mach/debug-macro.S
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* pull in the relevant register and map files. */
+
+#include <mach/map.h>
+#include <plat/regs-serial.h>
+
+	.macro addruart, rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1
+		ldreq	\rx, = S3C24XX_PA_UART
+		ldrne	\rx, = S3C24XX_VA_UART
+#if CONFIG_DEBUG_S3C_UART != 0
+		add	\rx, \rx, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C_UART)
+#endif
+	.endm
+
+/* include the reset of the code which will do the work, we're only
+ * compiling for a single cpu processor type so the default of s3c2440
+ * will be fine with us.
+ */
+
+#include <plat/debug-macro.S>

arch/arm/mach-s3c24a0/include/mach/irqs.h

@@ -0,0 +1,115 @@
+/* linux/arch/arm/mach-s3c24a0/include/mach/irqs.h
+ *
+ * Copyright (c) 2003-2005 Simtec Electronics
+ *   Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+
+#ifndef __ASM_ARCH_24A0_IRQS_H
+#define __ASM_ARCH_24A0_IRQS_H __FILE__
+
+#define IRQ_EINT0t2	S3C2410_IRQ(0)	/* 16 */
+/* for generic entry-macro.S */
+#define IRQ_EINT0	IRQ_EINT0t2
+
+#define IRQ_EINT3t6	S3C2410_IRQ(1)
+#define IRQ_EINT7t10	S3C2410_IRQ(2)
+#define IRQ_EINT11t14	S3C2410_IRQ(3)
+#define IRQ_EINT15t18	S3C2410_IRQ(4)	/* 20 */
+#define IRQ_TICK	S3C2410_IRQ(5)
+#define IRQ_DCTQ	S3C2410_IRQ(6)
+#define IRQ_MC		S3C2410_IRQ(7)
+#define IRQ_ME		S3C2410_IRQ(8)	/* 24 */
+#define IRQ_KEYPAD	S3C2410_IRQ(9)
+#define IRQ_TIMER0	S3C2410_IRQ(10)
+#define IRQ_TIMER1	S3C2410_IRQ(11)
+#define IRQ_TIMER2	S3C2410_IRQ(12)
+#define IRQ_TIMER3_4	S3C2410_IRQ(13)
+#define IRQ_OS_TIMER	IRQ_TIMER3_4
+#define IRQ_LCD		S3C2410_IRQ(14)
+#define IRQ_CAM_C	S3C2410_IRQ(15)
+#define IRQ_WDT_BATFLT	S3C2410_IRQ(16)	/* 32 */
+#define IRQ_UART0	S3C2410_IRQ(17)
+#define IRQ_CAM_P	S3C2410_IRQ(18)
+#define IRQ_MODEM	S3C2410_IRQ(19)
+#define IRQ_DMA		S3C2410_IRQ(20)
+#define IRQ_SDI		S3C2410_IRQ(21)
+#define IRQ_SPI0	S3C2410_IRQ(22)
+#define IRQ_UART1	S3C2410_IRQ(23)
+#define IRQ_AC97_NFLASH	S3C2410_IRQ(24)	/* 40 */
+#define IRQ_USBD	S3C2410_IRQ(25)
+#define IRQ_USBH	S3C2410_IRQ(26)
+#define IRQ_IIC		S3C2410_IRQ(27)
+#define IRQ_IRDA_MSTICK	S3C2410_IRQ(28)	/* 44 */
+#define IRQ_VLX_SPI1	S3C2410_IRQ(29)
+#define IRQ_RTC		S3C2410_IRQ(30)	/* 46 */
+#define IRQ_ADC_PEN     S3C2410_IRQ(31)
+
+/* interrupts generated from the external interrupts sources */
+#define IRQ_EINT00	S3C2410_IRQ(32)	/* 48 */
+#define IRQ_EINT1	S3C2410_IRQ(33)
+#define IRQ_EINT2	S3C2410_IRQ(34)
+#define IRQ_EINT3	S3C2410_IRQ(35)
+#define IRQ_EINT4	S3C2410_IRQ(36)
+#define IRQ_EINT5	S3C2410_IRQ(37)
+#define IRQ_EINT6	S3C2410_IRQ(38)
+#define IRQ_EINT7	S3C2410_IRQ(39)
+#define IRQ_EINT8	S3C2410_IRQ(40)
+#define IRQ_EINT9	S3C2410_IRQ(41)
+#define IRQ_EINT10	S3C2410_IRQ(42)
+#define IRQ_EINT11	S3C2410_IRQ(43)
+#define IRQ_EINT12	S3C2410_IRQ(44)
+#define IRQ_EINT13	S3C2410_IRQ(45)
+#define IRQ_EINT14	S3C2410_IRQ(46)
+#define IRQ_EINT15	S3C2410_IRQ(47)
+#define IRQ_EINT16	S3C2410_IRQ(48)
+#define IRQ_EINT17	S3C2410_IRQ(49)
+#define IRQ_EINT18	S3C2410_IRQ(50)
+
+/* SUB IRQS */
+#define IRQ_S3CUART_RX0		S3C2410_IRQ(51)	/* 67 */
+#define IRQ_S3CUART_TX0		S3C2410_IRQ(52)
+#define IRQ_S3CUART_ERR0	S3C2410_IRQ(53)
+
+#define IRQ_S3CUART_RX1		S3C2410_IRQ(54)
+#define IRQ_S3CUART_TX1		S3C2410_IRQ(55)
+#define IRQ_S3CUART_ERR1	S3C2410_IRQ(56)
+
+#define IRQ_S3CUART_RX2		(0x0)
+#define IRQ_S3CUART_TX2		(0x0)
+#define IRQ_S3CUART_ERR2	(0x0)
+
+
+#define IRQ_IRDA	S3C2410_IRQ(57)
+#define IRQ_MSTICK	S3C2410_IRQ(58)
+#define IRQ_RESERVED0	S3C2410_IRQ(59)
+#define IRQ_RESERVED1	S3C2410_IRQ(60)
+#define IRQ_RESERVED2	S3C2410_IRQ(61)
+#define IRQ_TIMER3	S3C2410_IRQ(62)
+#define IRQ_TIMER4	S3C2410_IRQ(63)
+#define IRQ_WDT		S3C2410_IRQ(64)
+#define IRQ_BATFLT	S3C2410_IRQ(65)
+#define IRQ_POST	S3C2410_IRQ(66)
+#define IRQ_DISP_FIFO	S3C2410_IRQ(67)
+#define IRQ_PENUP	S3C2410_IRQ(68)
+#define IRQ_PENDN	S3C2410_IRQ(69)
+#define IRQ_ADC		S3C2410_IRQ(70)
+#define IRQ_DISP_FRAME	S3C2410_IRQ(71)
+#define IRQ_NFLASH	S3C2410_IRQ(72)
+#define IRQ_AC97	S3C2410_IRQ(73)
+#define IRQ_SPI1	S3C2410_IRQ(74)
+#define IRQ_VLX		S3C2410_IRQ(75)
+#define IRQ_DMA0	S3C2410_IRQ(76)
+#define IRQ_DMA1	S3C2410_IRQ(77)
+#define IRQ_DMA2	S3C2410_IRQ(78)
+#define IRQ_DMA3	S3C2410_IRQ(79)
+
+#define IRQ_TC		(0x0)
+
+#define NR_IRQS		(IRQ_DMA3+1)
+
+#endif /* __ASM_ARCH_24A0_IRQS_H */

arch/arm/mach-s3c24a0/include/mach/map.h

@@ -0,0 +1,85 @@
+/* linux/arch/arm/mach-s3c24a0/include/mach/map.h
+ *
+ * Copyright 2003,2007  Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24A0 - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_24A0_MAP_H
+#define __ASM_ARCH_24A0_MAP_H __FILE__
+
+#include <plat/map-base.h>
+#include <plat/map.h>
+
+#define S3C24A0_PA_IO_BASE	(0x40000000)
+#define S3C24A0_PA_CLKPWR	(0x40000000)
+#define S3C24A0_PA_IRQ		(0x40200000)
+#define S3C24A0_PA_DMA		(0x40400000)
+#define S3C24A0_PA_MEMCTRL	(0x40C00000)
+#define S3C24A0_PA_NAND		(0x40C00000)
+#define S3C24A0_PA_SROM		(0x40C20000)
+#define S3C24A0_PA_SDRAM	(0x40C40000)
+#define S3C24A0_PA_BUSM		(0x40CE0000)
+#define S3C24A0_PA_USBHOST	(0x41000000)
+#define S3C24A0_PA_MODEMIF	(0x41180000)
+#define S3C24A0_PA_IRDA		(0x41800000)
+#define S3C24A0_PA_TIMER	(0x44000000)
+#define S3C24A0_PA_WATCHDOG	(0x44100000)
+#define S3C24A0_PA_RTC		(0x44200000)
+#define S3C24A0_PA_UART		(0x44400000)
+#define S3C24A0_PA_UART0	(S3C24A0_PA_UART)
+#define S3C24A0_PA_UART1	(S3C24A0_PA_UART + 0x4000)
+#define S3C24A0_PA_SPI		(0x44500000)
+#define S3C24A0_PA_IIC		(0x44600000)
+#define S3C24A0_PA_IIS		(0x44700000)
+#define S3C24A0_PA_GPIO		(0x44800000)
+#define S3C24A0_PA_KEYIF	(0x44900000)
+#define S3C24A0_PA_USBDEV	(0x44A00000)
+#define S3C24A0_PA_AC97		(0x45000000)
+#define S3C24A0_PA_ADC		(0x45800000)
+#define S3C24A0_PA_SDI		(0x46000000)
+#define S3C24A0_PA_MS		(0x46100000)
+#define S3C24A0_PA_LCD		(0x4A000000)
+#define S3C24A0_PA_VPOST	(0x4A100000)
+
+/* physical addresses of all the chip-select areas */
+
+#define S3C24A0_CS0	(0x00000000)
+#define S3C24A0_CS1	(0x04000000)
+#define S3C24A0_CS2	(0x08000000)
+#define S3C24A0_CS3	(0x0C000000)
+#define S3C24A0_CS4	(0x10000000)
+#define S3C24A0_CS5	(0x40000000)
+
+#define S3C24A0_SDRAM_PA	(S3C24A0_CS4)
+
+/* Use a single interface for common resources between S3C24XX cpus */
+
+#define S3C24XX_PA_IRQ		S3C24A0_PA_IRQ
+#define S3C24XX_PA_MEMCTRL	S3C24A0_PA_MEMCTRL
+#define S3C24XX_PA_USBHOST	S3C24A0_PA_USBHOST
+#define S3C24XX_PA_DMA		S3C24A0_PA_DMA
+#define S3C24XX_PA_CLKPWR	S3C24A0_PA_CLKPWR
+#define S3C24XX_PA_LCD		S3C24A0_PA_LCD
+#define S3C24XX_PA_UART		S3C24A0_PA_UART
+#define S3C24XX_PA_TIMER	S3C24A0_PA_TIMER
+#define S3C24XX_PA_USBDEV	S3C24A0_PA_USBDEV
+#define S3C24XX_PA_WATCHDOG	S3C24A0_PA_WATCHDOG
+#define S3C24XX_PA_IIS		S3C24A0_PA_IIS
+#define S3C24XX_PA_GPIO		S3C24A0_PA_GPIO
+#define S3C24XX_PA_RTC		S3C24A0_PA_RTC
+#define S3C24XX_PA_ADC		S3C24A0_PA_ADC
+#define S3C24XX_PA_SPI		S3C24A0_PA_SPI
+#define S3C24XX_PA_SDI		S3C24A0_PA_SDI
+#define S3C24XX_PA_NAND		S3C24A0_PA_NAND
+
+#define S3C_PA_UART		S3C24A0_PA_UART
+#define S3C_PA_IIC		S3C24A0_PA_IIC
+
+#endif /* __ASM_ARCH_24A0_MAP_H */

arch/arm/mach-s3c24a0/include/mach/memory.h

@@ -0,0 +1,19 @@
+/* linux/arch/arm/mach-s3c24a0/include/mach/memory.h
+ *  from linux/include/asm-arm/arch-rpc/memory.h
+ *
+ *  Copyright (C) 1996,1997,1998 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_24A0_MEMORY_H
+#define __ASM_ARCH_24A0_MEMORY_H __FILE__
+
+#define PHYS_OFFSET UL(0x10000000)
+
+#define __virt_to_bus(x) __virt_to_phys(x)
+#define __bus_to_virt(x) __phys_to_virt(x)
+
+#endif

arch/arm/mach-s3c24a0/include/mach/regs-clock.h

@@ -0,0 +1,88 @@
+/* linux/arch/arm/mach-s3c24a0/include/mach/regs-clock.h
+ *
+ * Copyright (c) 2003,2004,2005,2006 Simtec Electronics <linux@simtec.co.uk>
+ *		      http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C24A0 clock register definitions
+*/
+
+#ifndef __ASM_ARCH_24A0_REGS_CLOCK_H
+#define __ASM_ARCH_24A0_REGS_CLOCK_H __FILE__
+
+#define S3C24A0_MPLLCON		S3C2410_CLKREG(0x10)
+#define S3C24A0_UPLLCON		S3C2410_CLKREG(0x14)
+#define S3C24A0_CLKCON		S3C2410_CLKREG(0x20)
+#define S3C24A0_CLKSRC		S3C2410_CLKREG(0x24)
+#define S3C24A0_CLKDIVN		S3C2410_CLKREG(0x28)
+
+/* CLKCON register bits */
+
+#define S3C24A0_CLKCON_VLX	(1<<29)
+#define S3C24A0_CLKCON_VPOST	(1<<28)
+#define S3C24A0_CLKCON_WDT	(1<<27)	/* reserved */
+#define S3C24A0_CLKCON_MPEGDCTQ	(1<<26)
+#define S3C24A0_CLKCON_VPOSTIF	(1<<25)
+#define S3C24A0_CLKCON_MPEG4IF	(1<<24)
+#define S3C24A0_CLKCON_CAM_UPLL	(1<<23)
+#define S3C24A0_CLKCON_LCDC	(1<<22)
+#define S3C24A0_CLKCON_CAM_HCLK	(1<<21)
+#define S3C24A0_CLKCON_MPEG4	(1<<20)
+#define S3C24A0_CLKCON_KEYPAD	(1<<19)
+#define S3C24A0_CLKCON_ADC	(1<<18)
+#define S3C24A0_CLKCON_SDI	(1<<17)
+#define S3C24A0_CLKCON_MS	(1<<16) /* memory stick */
+#define S3C24A0_CLKCON_USBD	(1<<15)
+#define S3C24A0_CLKCON_GPIO	(1<<14)
+#define S3C24A0_CLKCON_IIS	(1<<13)
+#define S3C24A0_CLKCON_IIC	(1<<12)
+#define S3C24A0_CLKCON_SPI	(1<<11)
+#define S3C24A0_CLKCON_UART1	(1<<10)
+#define S3C24A0_CLKCON_UART0	(1<<9)
+#define S3C24A0_CLKCON_PWMT	(1<<8)
+#define S3C24A0_CLKCON_USBH	(1<<7)
+#define S3C24A0_CLKCON_AC97	(1<<6)
+#define S3C24A0_CLKCON_IrDA	(1<<4)
+#define S3C24A0_CLKCON_IDLE	(1<<2)
+#define S3C24A0_CLKCON_MON	(1<<1)
+#define S3C24A0_CLKCON_STOP	(1<<0)
+
+/* CLKSRC register bits */
+
+#define S3C24A0_CLKSRC_OSC	(1<<8)  /* CLKSRC */
+#define S3C24A0_CLKSRC_UPLL	(1<<7)
+#define S3C24A0_CLKSRC_MPLL	(1<<5)
+#define S3C24A0_CLKSRC_EXT	(1<<4)
+
+/* Use a single interface with the common code, for s3c24xx */
+
+#define S3C2410_MPLLCON		S3C24A0_MPLLCON
+#define S3C2410_UPLLCON		S3C24A0_UPLLCON
+#define S3C2410_CLKCON		S3C24A0_CLKCON
+#define S3C2410_CLKSLOW		S3C24A0_CLKSRC
+#define S3C2410_CLKDIVN		S3C24A0_CLKDIVN
+
+#define S3C2410_CLKCON_IDLE	S3C24A0_CLKCON_IDLE
+#define S3C2410_CLKCON_POWER	S3C24A0_CLKCON_STOP
+#define S3C2410_CLKCON_LCDC	S3C24A0_CLKCON_LCDC
+#define S3C2410_CLKCON_USBH	S3C24A0_CLKCON_USBH
+#define S3C2410_CLKCON_USBD	S3C24A0_CLKCON_USBD
+#define S3C2410_CLKCON_PWMT	S3C24A0_CLKCON_PWMT
+#define S3C2410_CLKCON_SDI	S3C24A0_CLKCON_SDI
+#define S3C2410_CLKCON_UART0	S3C24A0_CLKCON_UART0
+#define S3C2410_CLKCON_UART1	S3C24A0_CLKCON_UART1
+#define S3C2410_CLKCON_GPIO	S3C24A0_CLKCON_GPIO
+#define S3C2410_CLKCON_ADC	S3C24A0_CLKCON_ADC
+#define S3C2410_CLKCON_IIC	S3C24A0_CLKCON_IIC
+#define S3C2410_CLKCON_IIS	S3C24A0_CLKCON_IIS
+#define S3C2410_CLKCON_SPI	S3C24A0_CLKCON_SPI
+
+#define S3C2410_CLKSLOW_UCLK_OFF	S3C24A0_CLKSRC_UPLL
+#define S3C2410_CLKSLOW_MPLL_OFF	S3C24A0_CLKSRC_MPLL
+#define S3C2410_CLKSLOW_SLOW		(0xFF)
+#define S3C2410_CLKSLOW_GET_SLOWVAL(x)	(0x1)
+
+#endif /* __ASM_ARCH_24A0_REGS_CLOCK_H */

arch/arm/mach-s3c24a0/include/mach/regs-irq.h

@@ -0,0 +1,25 @@
+/* linux/arch/arm/mach-s3c24a0/include/mach/regs-irq.h
+ *
+ * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
+ *		      http://www.simtec.co.uk/products/SWLINUX/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+
+#ifndef ___ASM_ARCH_24A0_REGS_IRQ_H
+#define ___ASM_ARCH_24A0_REGS_IRQ_H __FILE__
+
+
+#define S3C2410_EINTMASK	S3C2410_EINTREG(0x034)
+#define S3C2410_EINTPEND	S3C2410_EINTREG(0X038)
+
+#define S3C24XX_EINTMASK	S3C24XX_EINTREG(0x034)
+#define S3C24XX_EINTPEND	S3C24XX_EINTREG(0X038)
+
+#endif /* __ASM_ARCH_24A0_REGS_IRQ_H */
+
+
+

arch/arm/mach-s3c24a0/include/mach/system.h

@@ -0,0 +1,25 @@
+/* linux/arch/arm/mach-s3c24a0/include/mach/system.h
+ *
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24A0 - System function defines and includes
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <mach/hardware.h>
+#include <asm/io.h>
+
+#include <mach/map.h>
+
+static void arch_idle(void)
+{
+	/* currently no specific idle support. */
+}
+
+void (*s3c24xx_reset_hook)(void);
+
+#include <asm/plat-s3c24xx/system-reset.h>

arch/arm/mach-s3c24a0/include/mach/tick.h

@@ -0,0 +1,15 @@
+/* linux/arch/arm/mach-s3c24a0/include/mach/tick.h
+ *
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C24A0 - timer tick support
+ */
+
+#define SUBSRC_TIMER4	(1 << (IRQ_TIMER4 - IRQ_S3CUART_RX0))
+
+static inline int s3c24xx_ostimer_pending(void)
+{
+	return __raw_readl(S3C2410_SUBSRCPND) & SUBSRC_TIMER4;
+}

arch/arm/mach-s3c24a0/include/mach/timex.h

@@ -0,0 +1,18 @@
+/* linux/arch/arm/mach-s3c24a0/include/mach/timex.h
+ *
+ * Copyright (c) 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - time parameters
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H
+
+#define CLOCK_TICK_RATE 12000000
+
+#endif /* __ASM_ARCH_TIMEX_H */

arch/arm/mach-s3c24a0/include/mach/vmalloc.h

@@ -0,0 +1,17 @@
+/* linux/include/asm-arm/arch-s3c24ao/vmalloc.h
+ *
+ * Copyright 2008 Simtec Electronics <linux@simtec.co.uk>
+
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C24A0 vmalloc definition
+*/
+
+#ifndef __ASM_ARCH_VMALLOC_H
+#define __ASM_ARCH_VMALLOC_H
+
+#define VMALLOC_END	  (0xE0000000)
+
+#endif /* __ASM_ARCH_VMALLOC_H */

arch/arm/mach-s3c6400/Kconfig

@@ -0,0 +1,8 @@
+# arch/arm/mach-s3c6400/Kconfig
+#
+# Copyright 2008 Openmoko, Inc.
+#	Simtec Electronics, Ben Dooks <ben@simtec.co.uk>
+#
+# Licensed under GPLv2
+
+# Currently nothing here, this will be added later

arch/arm/mach-s3c6400/Makefile

@@ -0,0 +1,15 @@
+# arch/arm/mach-s3c6400/Makefile
+#
+# Copyright 2008 Openmoko, Inc.
+# Copyright 2008 Simtec Electronics
+#
+# Licensed under GPLv2
+
+obj-y				:=
+obj-m				:=
+obj-n				:=
+obj-				:=
+
+# Core support for S3C6400 system
+
+obj-n				+= blank.o

arch/arm/mach-s3c6400/Makefile.boot

@@ -0,0 +1,2 @@
+   zreladdr-y	:= 0x50008000
+params_phys-y	:= 0x50000100

arch/arm/mach-s3c6400/include/mach/debug-macro.S

@@ -0,0 +1,39 @@
+/* arch/arm/mach-s3c6400/include/mach/debug-macro.S
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* pull in the relevant register and map files. */
+
+#include <mach/map.h>
+#include <plat/regs-serial.h>
+
+	/* note, for the boot process to work we have to keep the UART
+	 * virtual address aligned to an 1MiB boundary for the L1
+	 * mapping the head code makes. We keep the UART virtual address
+	 * aligned and add in the offset when we load the value here.
+	 */
+
+	.macro addruart, rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1
+		ldreq	\rx, = S3C_PA_UART
+		ldrne	\rx, = (S3C_VA_UART + S3C_PA_UART & 0xfffff)
+#if CONFIG_DEBUG_S3C_UART != 0
+		add	\rx, \rx, #(0x400 * CONFIG_DEBUG_S3C_UART)
+#endif
+	.endm
+
+/* include the reset of the code which will do the work, we're only
+ * compiling for a single cpu processor type so the default of s3c2440
+ * will be fine with us.
+ */
+
+#include <plat/debug-macro.S>

arch/arm/mach-s3c6400/include/mach/dma.h

@@ -0,0 +1,16 @@
+/* linux/arch/arm/mach-s3c6400/include/mach/dma.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C6400 - DMA support
+ */
+
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H __FILE__
+
+/* currently nothing here, placeholder */
+
+#endif /* __ASM_ARCH_IRQ_H */

arch/arm/mach-s3c6400/include/mach/entry-macro.S

@@ -0,0 +1,44 @@
+/* arch/arm/mach-s3c6400/include/mach/entry-macro.S
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Low-level IRQ helper macros for the Samsung S3C64XX series
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+*/
+
+#include <asm/hardware/vic.h>
+#include <mach/map.h>
+#include <plat/irqs.h>
+
+	.macro	disable_fiq
+	.endm
+
+	.macro	get_irqnr_preamble, base, tmp
+	ldr	\base, =S3C_VA_VIC0
+	.endm
+
+	.macro	arch_ret_to_user, tmp1, tmp2
+	.endm
+
+	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+
+	@ check the vic0
+	mov	\irqnr, # S3C_IRQ_OFFSET + 31
+	ldr	\irqstat, [ \base, # VIC_IRQ_STATUS ]
+	teq	\irqstat, #0
+
+	@ otherwise try vic1
+	addeq	\tmp, \base, #(S3C_VA_VIC1 - S3C_VA_VIC0)
+	addeq	\irqnr, \irqnr, #32
+	ldreq	\irqstat, [ \tmp, # VIC_IRQ_STATUS ]
+	teqeq	\irqstat, #0
+
+	clzne	\irqstat, \irqstat
+	subne	\irqnr, \irqnr, \irqstat
+	.endm

arch/arm/mach-s3c6400/include/mach/gpio-core.h

@@ -0,0 +1,21 @@
+/* arch/arm/mach-s3c6400/include/mach/gpio-core.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX - GPIO core support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_GPIO_CORE_H
+#define __ASM_ARCH_GPIO_CORE_H __FILE__
+
+/* currently we just include the platform support */
+#include <plat/gpio-core.h>
+
+#endif /* __ASM_ARCH_GPIO_CORE_H */

arch/arm/mach-s3c6400/include/mach/gpio.h

@@ -0,0 +1,96 @@
+/* arch/arm/mach-s3c6400/include/mach/gpio.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C6400 - GPIO lib support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define gpio_get_value	__gpio_get_value
+#define gpio_set_value	__gpio_set_value
+#define gpio_cansleep	__gpio_cansleep
+#define gpio_to_irq	__gpio_to_irq
+
+/* GPIO bank sizes */
+#define S3C64XX_GPIO_A_NR	(8)
+#define S3C64XX_GPIO_B_NR	(7)
+#define S3C64XX_GPIO_C_NR	(8)
+#define S3C64XX_GPIO_D_NR	(5)
+#define S3C64XX_GPIO_E_NR	(5)
+#define S3C64XX_GPIO_F_NR	(16)
+#define S3C64XX_GPIO_G_NR	(7)
+#define S3C64XX_GPIO_H_NR	(10)
+#define S3C64XX_GPIO_I_NR	(16)
+#define S3C64XX_GPIO_J_NR	(12)
+#define S3C64XX_GPIO_K_NR	(16)
+#define S3C64XX_GPIO_L_NR	(15)
+#define S3C64XX_GPIO_M_NR	(6)
+#define S3C64XX_GPIO_N_NR	(16)
+#define S3C64XX_GPIO_O_NR	(16)
+#define S3C64XX_GPIO_P_NR	(15)
+#define S3C64XX_GPIO_Q_NR	(9)
+
+/* GPIO bank numbes */
+
+/* CONFIG_S3C_GPIO_SPACE allows the user to select extra
+ * space for debugging purposes so that any accidental
+ * change from one gpio bank to another can be caught.
+*/
+
+#define S3C64XX_GPIO_NEXT(__gpio) \
+	((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1)
+
+enum s3c_gpio_number {
+	S3C64XX_GPIO_A_START = 0,
+	S3C64XX_GPIO_B_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_A),
+	S3C64XX_GPIO_C_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_B),
+	S3C64XX_GPIO_D_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_C),
+	S3C64XX_GPIO_E_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_D),
+	S3C64XX_GPIO_F_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_E),
+	S3C64XX_GPIO_G_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_F),
+	S3C64XX_GPIO_H_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_G),
+	S3C64XX_GPIO_I_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_H),
+	S3C64XX_GPIO_J_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_I),
+	S3C64XX_GPIO_K_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_J),
+	S3C64XX_GPIO_L_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_K),
+	S3C64XX_GPIO_M_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_L),
+	S3C64XX_GPIO_N_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_M),
+	S3C64XX_GPIO_O_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_N),
+	S3C64XX_GPIO_P_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_O),
+	S3C64XX_GPIO_Q_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_P),
+};
+
+/* S3C64XX GPIO number definitions. */
+
+#define S3C64XX_GPA(_nr)	(S3C64XX_GPIO_A_START + (_nr))
+#define S3C64XX_GPB(_nr)	(S3C64XX_GPIO_B_START + (_nr))
+#define S3C64XX_GPC(_nr)	(S3C64XX_GPIO_C_START + (_nr))
+#define S3C64XX_GPD(_nr)	(S3C64XX_GPIO_D_START + (_nr))
+#define S3C64XX_GPE(_nr)	(S3C64XX_GPIO_E_START + (_nr))
+#define S3C64XX_GPF(_nr)	(S3C64XX_GPIO_F_START + (_nr))
+#define S3C64XX_GPG(_nr)	(S3C64XX_GPIO_G_START + (_nr))
+#define S3C64XX_GPH(_nr)	(S3C64XX_GPIO_H_START + (_nr))
+#define S3C64XX_GPI(_nr)	(S3C64XX_GPIO_I_START + (_nr))
+#define S3C64XX_GPJ(_nr)	(S3C64XX_GPIO_J_START + (_nr))
+#define S3C64XX_GPK(_nr)	(S3C64XX_GPIO_K_START + (_nr))
+#define S3C64XX_GPL(_nr)	(S3C64XX_GPIO_L_START + (_nr))
+#define S3C64XX_GPM(_nr)	(S3C64XX_GPIO_M_START + (_nr))
+#define S3C64XX_GPN(_nr)	(S3C64XX_GPIO_N_START + (_nr))
+#define S3C64XX_GPO(_nr)	(S3C64XX_GPIO_O_START + (_nr))
+#define S3C64XX_GPP(_nr)	(S3C64XX_GPIO_P_START + (_nr))
+#define S3C64XX_GPQ(_nr)	(S3C64XX_GPIO_Q_START + (_nr))
+
+/* the end of the S3C64XX specific gpios */
+#define S3C64XX_GPIO_END	(S3C64XX_GPQ(S3C64XX_GPIO_Q_NR) + 1)
+#define S3C_GPIO_END		S3C64XX_GPIO_END
+
+/* define the number of gpios we need to the one after the GPQ() range */
+#define ARCH_NR_GPIOS	(S3C64XX_GPQ(S3C64XX_GPIO_Q_NR) + 1)
+
+#include <asm-generic/gpio.h>

arch/arm/mach-s3c6400/include/mach/hardware.h

@@ -0,0 +1,16 @@
+/* linux/arch/arm/mach-s3c6400/include/mach/hardware.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C6400 - Hardware support
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H __FILE__
+
+/* currently nothing here, placeholder */
+
+#endif /* __ASM_ARCH_IRQ_H */

arch/arm/mach-s3c6400/include/mach/irqs.h

@@ -0,0 +1,20 @@
+/* linux/arch/arm/mach-s3c6400/include/mach/irqs.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C6400 - IRQ definitions
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H __FILE__
+
+#ifndef __ASM_ARM_IRQ_H
+#error "Do not include this directly, instead #include <asm/irq.h>"
+#endif
+
+#include <plat/irqs.h>
+
+#endif /* __ASM_ARCH_IRQ_H */

arch/arm/mach-s3c6400/include/mach/map.h

@@ -0,0 +1,68 @@
+/* linux/arch/arm/mach-s3c6400/include/mach/map.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C64XX - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_MAP_H
+#define __ASM_ARCH_MAP_H __FILE__
+
+#include <plat/map-base.h>
+
+/* HSMMC units */
+#define S3C64XX_PA_HSMMC(x)	(0x7C200000 + ((x) * 0x100000))
+#define S3C64XX_PA_HSMMC0	S3C64XX_PA_HSMMC(0)
+#define S3C64XX_PA_HSMMC1	S3C64XX_PA_HSMMC(1)
+#define S3C64XX_PA_HSMMC2	S3C64XX_PA_HSMMC(2)
+
+#define S3C_PA_UART		(0x7F005000)
+#define S3C_PA_UART0		(S3C_PA_UART + 0x00)
+#define S3C_PA_UART1		(S3C_PA_UART + 0x400)
+#define S3C_PA_UART2		(S3C_PA_UART + 0x800)
+#define S3C_PA_UART3		(S3C_PA_UART + 0xC00)
+#define S3C_UART_OFFSET		(0x400)
+
+/* See notes on UART VA mapping in debug-macro.S */
+#define S3C_VA_UARTx(x)	(S3C_VA_UART + (S3C_PA_UART & 0xfffff) + ((x) * S3C_UART_OFFSET))
+
+#define S3C_VA_UART0		S3C_VA_UARTx(0)
+#define S3C_VA_UART1		S3C_VA_UARTx(1)
+#define S3C_VA_UART2		S3C_VA_UARTx(2)
+#define S3C_VA_UART3		S3C_VA_UARTx(3)
+
+#define S3C64XX_PA_FB		(0x77100000)
+#define S3C64XX_PA_SYSCON	(0x7E00F000)
+#define S3C64XX_PA_TIMER	(0x7F006000)
+#define S3C64XX_PA_IIC0		(0x7F004000)
+#define S3C64XX_PA_IIC1		(0x7F00F000)
+
+#define S3C64XX_PA_GPIO		(0x7F008000)
+#define S3C64XX_VA_GPIO		S3C_ADDR(0x00500000)
+#define S3C64XX_SZ_GPIO		SZ_4K
+
+#define S3C64XX_PA_SDRAM	(0x50000000)
+#define S3C64XX_PA_VIC0		(0x71200000)
+#define S3C64XX_PA_VIC1		(0x71300000)
+
+/* place VICs close together */
+#define S3C_VA_VIC0		(S3C_VA_IRQ + 0x00)
+#define S3C_VA_VIC1		(S3C_VA_IRQ + 0x10000)
+
+/* compatibiltiy defines. */
+#define S3C_PA_TIMER		S3C64XX_PA_TIMER
+#define S3C_PA_HSMMC0		S3C64XX_PA_HSMMC0
+#define S3C_PA_HSMMC1		S3C64XX_PA_HSMMC1
+#define S3C_PA_HSMMC2		S3C64XX_PA_HSMMC2
+#define S3C_PA_IIC		S3C64XX_PA_IIC0
+#define S3C_PA_IIC1		S3C64XX_PA_IIC1
+#define S3C_PA_FB		S3C64XX_PA_FB
+
+#endif /* __ASM_ARCH_6400_MAP_H */

arch/arm/mach-s3c6400/include/mach/memory.h

@@ -0,0 +1,18 @@
+/* arch/arm/mach-s3c6400/include/mach/memory.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#define PHYS_OFFSET     UL(0x50000000)
+
+#endif

arch/arm/mach-s3c6400/include/mach/pwm-clock.h

@@ -0,0 +1,56 @@
+/* linux/arch/arm/mach-s3c6400/include/mach/pwm-clock.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C64xx - pwm clock and timer support
+ */
+
+/**
+ * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk
+ * @tcfg: The timer TCFG1 register bits shifted down to 0.
+ *
+ * Return true if the given configuration from TCFG1 is a TCLK instead
+ * any of the TDIV clocks.
+ */
+static inline int pwm_cfg_src_is_tclk(unsigned long tcfg)
+{
+	return tcfg >= S3C64XX_TCFG1_MUX_TCLK;
+}
+
+/**
+ * tcfg_to_divisor() - convert tcfg1 setting to a divisor
+ * @tcfg1: The tcfg1 setting, shifted down.
+ *
+ * Get the divisor value for the given tcfg1 setting. We assume the
+ * caller has already checked to see if this is not a TCLK source.
+ */
+static inline unsigned long tcfg_to_divisor(unsigned long tcfg1)
+{
+	return 1 << tcfg1;
+}
+
+/**
+ * pwm_tdiv_has_div1() - does the tdiv setting have a /1
+ *
+ * Return true if we have a /1 in the tdiv setting.
+ */
+static inline unsigned int pwm_tdiv_has_div1(void)
+{
+	return 1;
+}
+
+/**
+ * pwm_tdiv_div_bits() - calculate TCFG1 divisor value.
+ * @div: The divisor to calculate the bit information for.
+ *
+ * Turn a divisor into the necessary bit field for TCFG1.
+ */
+static inline unsigned long pwm_tdiv_div_bits(unsigned int div)
+{
+	return ilog2(div);
+}
+
+#define S3C_TCFG1_MUX_TCLK S3C64XX_TCFG1_MUX_TCLK

arch/arm/mach-s3c6400/include/mach/regs-fb.h

@@ -0,0 +1,259 @@
+/* arch/arm/mach-s3c6400/include/mach/regs-fb.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      http://armlinux.simtec.co.uk/
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C64XX - new-style framebuffer register definitions
+ *
+ * This is the register set for the new style framebuffer interface
+ * found from the S3C2443 onwards and specifically the S3C64XX series
+ * S3C6400 and S3C6410.
+ *
+ * The file contains the cpu specific items which change between whichever
+ * architecture is selected. See <plat/regs-fb.h> for the core definitions
+ * that are the same.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* include the core definitions here, in case we really do need to
+ * override them at a later date.
+*/
+
+#include <plat/regs-fb.h>
+
+#define S3C_FB_MAX_WIN (5)  /* number of hardware windows available. */
+#define VIDCON1_FSTATUS_EVEN	(1 << 15)
+
+/* Video timing controls */
+#define VIDTCON0				(0x10)
+#define VIDTCON1				(0x14)
+#define VIDTCON2				(0x18)
+
+/* Window position controls */
+
+#define WINCON(_win)				(0x20 + ((_win) * 4))
+
+/* OSD1 and OSD4 do not have register D */
+
+#define VIDOSD_A(_win)				(0x40 + ((_win) * 16))
+#define VIDOSD_B(_win)				(0x44 + ((_win) * 16))
+#define VIDOSD_C(_win)				(0x48 + ((_win) * 16))
+#define VIDOSD_D(_win)				(0x4C + ((_win) * 16))
+
+/* Video buffer addresses */
+
+#define VIDW_BUF_START(_buff)			(0xA0 + ((_buff) * 8))
+#define VIDW_BUF_START1(_buff)			(0xA4 + ((_buff) * 8))
+#define VIDW_BUF_END(_buff)			(0xD0 + ((_buff) * 8))
+#define VIDW_BUF_END1(_buff)			(0xD4 + ((_buff) * 8))
+#define VIDW_BUF_SIZE(_buff)			(0x100 + ((_buff) * 4))
+
+#define VIDINTCON0				(0x130)
+
+#define WxKEYCONy(_win, _con)			((0x140 + ((_win) * 8)) + ((_con) * 4))
+
+/* WINCONx */
+
+#define WINCONx_CSCWIDTH_MASK			(0x3 << 26)
+#define WINCONx_CSCWIDTH_SHIFT			(26)
+#define WINCONx_CSCWIDTH_WIDE			(0x0 << 26)
+#define WINCONx_CSCWIDTH_NARROW			(0x3 << 26)
+
+#define WINCONx_ENLOCAL				(1 << 22)
+#define WINCONx_BUFSTATUS			(1 << 21)
+#define WINCONx_BUFSEL				(1 << 20)
+#define WINCONx_BUFAUTOEN			(1 << 19)
+#define WINCONx_YCbCr				(1 << 13)
+
+#define WINCON1_LOCALSEL_CAMIF			(1 << 23)
+
+#define WINCON2_LOCALSEL_CAMIF			(1 << 23)
+#define WINCON2_BLD_PIX				(1 << 6)
+
+#define WINCON2_ALPHA_SEL			(1 << 1)
+#define WINCON2_BPPMODE_MASK			(0xf << 2)
+#define WINCON2_BPPMODE_SHIFT			(2)
+#define WINCON2_BPPMODE_1BPP			(0x0 << 2)
+#define WINCON2_BPPMODE_2BPP			(0x1 << 2)
+#define WINCON2_BPPMODE_4BPP			(0x2 << 2)
+#define WINCON2_BPPMODE_8BPP_1232		(0x4 << 2)
+#define WINCON2_BPPMODE_16BPP_565		(0x5 << 2)
+#define WINCON2_BPPMODE_16BPP_A1555		(0x6 << 2)
+#define WINCON2_BPPMODE_16BPP_I1555		(0x7 << 2)
+#define WINCON2_BPPMODE_18BPP_666		(0x8 << 2)
+#define WINCON2_BPPMODE_18BPP_A1665		(0x9 << 2)
+#define WINCON2_BPPMODE_19BPP_A1666		(0xa << 2)
+#define WINCON2_BPPMODE_24BPP_888		(0xb << 2)
+#define WINCON2_BPPMODE_24BPP_A1887		(0xc << 2)
+#define WINCON2_BPPMODE_25BPP_A1888		(0xd << 2)
+#define WINCON2_BPPMODE_28BPP_A4888		(0xd << 2)
+
+#define WINCON3_BLD_PIX				(1 << 6)
+
+#define WINCON3_ALPHA_SEL			(1 << 1)
+#define WINCON3_BPPMODE_MASK			(0xf << 2)
+#define WINCON3_BPPMODE_SHIFT			(2)
+#define WINCON3_BPPMODE_1BPP			(0x0 << 2)
+#define WINCON3_BPPMODE_2BPP			(0x1 << 2)
+#define WINCON3_BPPMODE_4BPP			(0x2 << 2)
+#define WINCON3_BPPMODE_16BPP_565		(0x5 << 2)
+#define WINCON3_BPPMODE_16BPP_A1555		(0x6 << 2)
+#define WINCON3_BPPMODE_16BPP_I1555		(0x7 << 2)
+#define WINCON3_BPPMODE_18BPP_666		(0x8 << 2)
+#define WINCON3_BPPMODE_18BPP_A1665		(0x9 << 2)
+#define WINCON3_BPPMODE_19BPP_A1666		(0xa << 2)
+#define WINCON3_BPPMODE_24BPP_888		(0xb << 2)
+#define WINCON3_BPPMODE_24BPP_A1887		(0xc << 2)
+#define WINCON3_BPPMODE_25BPP_A1888		(0xd << 2)
+#define WINCON3_BPPMODE_28BPP_A4888		(0xd << 2)
+
+#define VIDINTCON0_FIFIOSEL_WINDOW2		(0x10 << 5)
+#define VIDINTCON0_FIFIOSEL_WINDOW3		(0x20 << 5)
+#define VIDINTCON0_FIFIOSEL_WINDOW4		(0x40 << 5)
+
+#define DITHMODE				(0x170)
+#define WINxMAP(_win)				(0x180 + ((_win) * 4))
+
+
+#define DITHMODE_R_POS_MASK			(0x3 << 5)
+#define DITHMODE_R_POS_SHIFT			(5)
+#define DITHMODE_R_POS_8BIT			(0x0 << 5)
+#define DITHMODE_R_POS_6BIT			(0x1 << 5)
+#define DITHMODE_R_POS_5BIT			(0x2 << 5)
+
+#define DITHMODE_G_POS_MASK			(0x3 << 3)
+#define DITHMODE_G_POS_SHIFT			(3)
+#define DITHMODE_G_POS_8BIT			(0x0 << 3)
+#define DITHMODE_G_POS_6BIT			(0x1 << 3)
+#define DITHMODE_G_POS_5BIT			(0x2 << 3)
+
+#define DITHMODE_B_POS_MASK			(0x3 << 1)
+#define DITHMODE_B_POS_SHIFT			(1)
+#define DITHMODE_B_POS_8BIT			(0x0 << 1)
+#define DITHMODE_B_POS_6BIT			(0x1 << 1)
+#define DITHMODE_B_POS_5BIT			(0x2 << 1)
+
+#define DITHMODE_DITH_EN			(1 << 0)
+
+#define WPALCON					(0x1A0)
+
+#define WPALCON_W4PAL_16BPP_A555		(1 << 8)
+#define WPALCON_W3PAL_16BPP_A555		(1 << 7)
+#define WPALCON_W2PAL_16BPP_A555		(1 << 6)
+
+/* Palette registers */
+
+#define WIN2_PAL(_entry)			(0x300 + ((_entry) * 2))
+#define WIN3_PAL(_entry)			(0x320 + ((_entry) * 2))
+#define WIN4_PAL(_entry)			(0x340 + ((_entry) * 2))
+#define WIN0_PAL(_entry)			(0x400 + ((_entry) * 4))
+#define WIN1_PAL(_entry)			(0x800 + ((_entry) * 4))
+
+/* system specific implementation code for palette sizes, and other
+ * information that changes depending on which architecture is being
+ * compiled.
+*/
+
+/* return true if window _win has OSD register D */
+#define s3c_fb_has_osd_d(_win) ((_win) != 4 && (_win) != 0)
+
+static inline unsigned int s3c_fb_win_pal_size(unsigned int win)
+{
+	if (win < 2)
+		return 256;
+	if (win < 4)
+		return 16;
+	if (win == 4)
+		return 4;
+
+	BUG();	/* shouldn't get here */
+}
+
+static inline int s3c_fb_validate_win_bpp(unsigned int win, unsigned int bpp)
+{
+	/* all windows can do 1/2 bpp */
+
+	if ((bpp == 25 || bpp == 19) && win == 0)
+		return 0;	/* win 0 does not have 19 or 25bpp modes */
+
+	if (bpp == 4 && win == 4)
+		return 0;
+
+	if (bpp == 8 && (win >= 3))
+		return 0;	/* win 3/4 cannot do 8bpp in any mode */
+
+	return 1;
+}
+
+static inline unsigned int s3c_fb_pal_reg(unsigned int window, int reg)
+{
+	switch (window) {
+	case 0: return WIN0_PAL(reg);
+	case 1: return WIN1_PAL(reg);
+	case 2: return WIN2_PAL(reg);
+	case 3: return WIN3_PAL(reg);
+	case 4: return WIN4_PAL(reg);
+	}
+
+	BUG();
+}
+
+static inline int s3c_fb_pal_is16(unsigned int window)
+{
+	return window > 1;
+}
+
+struct s3c_fb_palette {
+	struct fb_bitfield	r;
+	struct fb_bitfield	g;
+	struct fb_bitfield	b;
+	struct fb_bitfield	a;
+};
+
+static inline void s3c_fb_init_palette(unsigned int window,
+				       struct s3c_fb_palette *palette)
+{
+	if (window < 2) {
+		/* Windows 0/1 are 8/8/8 or A/8/8/8 */
+		palette->r.offset = 16;
+		palette->r.length = 8;
+		palette->g.offset = 8;
+		palette->g.length = 8;
+		palette->b.offset = 0;
+		palette->b.length = 8;
+	} else {
+		/* currently we assume RGB 5/6/5 */
+		palette->r.offset = 11;
+		palette->r.length = 5;
+		palette->g.offset = 5;
+		palette->g.length = 6;
+		palette->b.offset = 0;
+		palette->b.length = 5;
+	}
+}
+
+/* Notes on per-window bpp settings
+ *
+ * Value	Win0	 Win1	  Win2	   Win3	    Win 4
+ * 0000		1(P)	 1(P)	  1(P)	   1(P)	    1(P)
+ * 0001		2(P)	 2(P)     2(P)	   2(P)	    2(P)
+ * 0010		4(P)	 4(P)     4(P)	   4(P)     -none-
+ * 0011		8(P)	 8(P)     -none-   -none-   -none-
+ * 0100		-none-	 8(A232)  8(A232)  -none-   -none-
+ * 0101		16(565)	 16(565)  16(565)  16(565)   16(565)
+ * 0110		-none-	 16(A555) 16(A555) 16(A555)  16(A555)
+ * 0111		16(I555) 16(I565) 16(I555) 16(I555)  16(I555)
+ * 1000		18(666)	 18(666)  18(666)  18(666)   18(666)
+ * 1001		-none-	 18(A665) 18(A665) 18(A665)  16(A665)
+ * 1010		-none-	 19(A666) 19(A666) 19(A666)  19(A666)
+ * 1011		24(888)	 24(888)  24(888)  24(888)   24(888)
+ * 1100		-none-	 24(A887) 24(A887) 24(A887)  24(A887)
+ * 1101		-none-	 25(A888) 25(A888) 25(A888)  25(A888)
+ * 1110		-none-	 -none-	  -none-   -none-    -none-
+ * 1111		-none-	 -none-   -none-   -none-    -none-
+*/

arch/arm/mach-s3c6400/include/mach/regs-irq.h

@@ -0,0 +1,20 @@
+/* linux/arch/arm/mach-s3c6400/include/mach/regs-irq.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C64XX - IRQ register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_REGS_IRQ_H
+#define __ASM_ARCH_REGS_IRQ_H __FILE__
+
+#include <asm/hardware/vic.h>
+
+#endif /* __ASM_ARCH_6400_REGS_IRQ_H */

arch/arm/mach-s3c6400/include/mach/system.h

@@ -0,0 +1,24 @@
+/* linux/arch/arm/mach-s3c6400/include/mach/system.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C6400 - system implementation
+ */
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H __FILE__
+
+static void arch_idle(void)
+{
+	/* nothing here yet */
+}
+
+static void arch_reset(char mode)
+{
+	/* nothing here yet */
+}
+
+#endif /* __ASM_ARCH_IRQ_H */

arch/arm/mach-s3c6400/include/mach/tick.h

@@ -0,0 +1,29 @@
+/* linux/arch/arm/mach-s3c6400/include/mach/tick.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C64XX - Timer tick support definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_TICK_H
+#define __ASM_ARCH_TICK_H __FILE__
+
+/* note, the timer interrutps turn up in 2 places, the vic and then
+ * the timer block. We take the VIC as the base at the moment.
+ */
+static inline u32 s3c24xx_ostimer_pending(void)
+{
+	u32 pend = __raw_readl(S3C_VA_VIC0 + VIC_RAW_STATUS);
+	return pend & 1 << (IRQ_TIMER4_VIC - S3C64XX_IRQ_VIC0(0));
+}
+
+#define TICK_MAX	(0xffffffff)
+
+#endif /* __ASM_ARCH_6400_TICK_H */

arch/arm/mach-s3c6400/include/mach/uncompress.h

@@ -0,0 +1,28 @@
+/* arch/arm/mach-s3c6400/include/mach/uncompress.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C6400 - uncompress code
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+#include <mach/map.h>
+#include <plat/uncompress.h>
+
+static void arch_detect_cpu(void)
+{
+	/* we do not need to do any cpu detection here at the moment. */
+	fifo_mask = S3C2440_UFSTAT_TXMASK;
+	fifo_max = 63 << S3C2440_UFSTAT_TXSHIFT;
+}
+
+#endif /* __ASM_ARCH_UNCOMPRESS_H */

arch/arm/mach-s3c6410/Kconfig

@@ -0,0 +1,62 @@
+# arch/arm/mach-s3c6410/Kconfig
+#
+# Copyright 2008 Openmoko, Inc.
+# Copyright 2008 Simtec Electronics
+#
+# Licensed under GPLv2
+
+# Configuration options for the S3C6410 CPU
+
+config CPU_S3C6410
+	bool
+	select CPU_S3C6400_INIT
+	select CPU_S3C6400_CLOCK
+	help
+	  Enable S3C6410 CPU support
+
+config S3C6410_SETUP_SDHCI
+	bool
+	help
+	  Internal helper functions for S3C6410 based SDHCI systems
+
+config MACH_SMDK6410
+	bool "SMDK6410"
+	select CPU_S3C6410
+	select S3C_DEV_HSMMC
+	select S3C_DEV_HSMMC1
+	select S3C_DEV_I2C1
+	select S3C_DEV_FB
+	select S3C6410_SETUP_SDHCI
+	select S3C64XX_SETUP_I2C1
+	select S3C64XX_SETUP_FB_24BPP
+	help
+	  Machine support for the Samsung SMDK6410
+
+# At least some of the SMDK6410s were shipped with the card detect
+# for the MMC/SD slots connected to the same input. This means that
+# either the boards need to be altered to have channel0 to an alternate
+# configuration or that only one slot can be used.
+
+choice
+	prompt "SMDK6410 MMC/SD slot setup"
+	depends on MACH_SMDK6410
+
+config SMDK6410_SD_CH0
+	bool "Use channel 0 only"
+	depends on MACH_SMDK6410
+	help
+          Select CON7 (channel 0) as the MMC/SD slot, as
+	  at least some SMDK6410 boards come with the
+	  resistors fitted so that the card detects for
+	  channels 0 and 1 are the same.
+       
+config SMDK6410_SD_CH1
+	bool "Use channel 1 only"
+	depends on MACH_SMDK6410
+	help
+          Select CON6 (channel 1) as the MMC/SD slot, as
+	  at least some SMDK6410 boards come with the
+	  resistors fitted so that the card detects for
+	  channels 0 and 1 are the same.
+
+endchoice

arch/arm/mach-s3c6410/Makefile

@@ -0,0 +1,23 @@
+# arch/arm/plat-s3c6410/Makefile
+#
+# Copyright 2008 Openmoko, Inc.
+# Copyright 2008 Simtec Electronics
+#
+# Licensed under GPLv2
+
+obj-y				:=
+obj-m				:=
+obj-n				:=
+obj-				:=
+
+# Core support for S3C6410 system
+
+obj-$(CONFIG_CPU_S3C6410)	+= cpu.o
+
+# Helper and device support
+
+obj-$(CONFIG_S3C6410_SETUP_SDHCI)	+= setup-sdhci.o
+
+# machine support
+
+obj-$(CONFIG_MACH_SMDK6410)	+= mach-smdk6410.o

arch/arm/mach-s3c6410/cpu.c

@@ -0,0 +1,101 @@
+/* linux/arch/arm/mach-s3c6410/cpu.c
+ *
+ * Copyright 2008 Simtec Electronics
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/sysdev.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <asm/irq.h>
+
+#include <plat/cpu-freq.h>
+#include <plat/regs-serial.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/clock.h>
+#include <plat/sdhci.h>
+#include <plat/iic-core.h>
+#include <plat/s3c6400.h>
+#include <plat/s3c6410.h>
+
+/* Initial IO mappings */
+
+static struct map_desc s3c6410_iodesc[] __initdata = {
+};
+
+/* s3c6410_map_io
+ *
+ * register the standard cpu IO areas
+*/
+
+void __init s3c6410_map_io(void)
+{
+	iotable_init(s3c6410_iodesc, ARRAY_SIZE(s3c6410_iodesc));
+
+	/* initialise device information early */
+	s3c6410_default_sdhci0();
+	s3c6410_default_sdhci1();
+
+	/* the i2c devices are directly compatible with s3c2440 */
+	s3c_i2c0_setname("s3c2440-i2c");
+	s3c_i2c1_setname("s3c2440-i2c");
+}
+
+void __init s3c6410_init_clocks(int xtal)
+{
+	printk(KERN_DEBUG "%s: initialising clocks\n", __func__);
+	s3c24xx_register_baseclocks(xtal);
+	s3c64xx_register_clocks();
+	s3c6400_register_clocks();
+	s3c6400_setup_clocks();
+}
+
+void __init s3c6410_init_irq(void)
+{
+	/* VIC0 is missing IRQ7, VIC1 is fully populated. */
+	s3c64xx_init_irq(~0 & ~(1 << 7), ~0);
+}
+
+struct sysdev_class s3c6410_sysclass = {
+	.name	= "s3c6410-core",
+};
+
+static struct sys_device s3c6410_sysdev = {
+	.cls	= &s3c6410_sysclass,
+};
+
+static int __init s3c6410_core_init(void)
+{
+	return sysdev_class_register(&s3c6410_sysclass);
+}
+
+core_initcall(s3c6410_core_init);
+
+int __init s3c6410_init(void)
+{
+	printk("S3C6410: Initialising architecture\n");
+
+	return sysdev_register(&s3c6410_sysdev);
+}

arch/arm/mach-s3c6410/mach-smdk6410.c

@@ -0,0 +1,185 @@
+/* linux/arch/arm/mach-s3c6410/mach-smdk6410.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/fb.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+
+#include <video/platform_lcd.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/regs-fb.h>
+#include <mach/map.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <plat/regs-serial.h>
+#include <plat/iic.h>
+#include <plat/fb.h>
+
+#include <plat/s3c6410.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
+#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+
+static struct s3c2410_uartcfg smdk6410_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport	     = 0,
+		.flags	     = 0,
+		.ucon	     = 0x3c5,
+		.ulcon	     = 0x03,
+		.ufcon	     = 0x51,
+	},
+	[1] = {
+		.hwport	     = 1,
+		.flags	     = 0,
+		.ucon	     = 0x3c5,
+		.ulcon	     = 0x03,
+		.ufcon	     = 0x51,
+	},
+};
+
+/* framebuffer and LCD setup. */
+
+/* GPF15 = LCD backlight control
+ * GPF13 => Panel power
+ * GPN5 = LCD nRESET signal
+ * PWM_TOUT1 => backlight brightness
+ */
+
+static void smdk6410_lcd_power_set(struct plat_lcd_data *pd,
+				   unsigned int power)
+{
+	if (power) {
+		gpio_direction_output(S3C64XX_GPF(13), 1);
+		gpio_direction_output(S3C64XX_GPF(15), 1);
+
+		/* fire nRESET on power up */
+		gpio_direction_output(S3C64XX_GPN(5), 0);
+		msleep(10);
+		gpio_direction_output(S3C64XX_GPN(5), 1);
+		msleep(1);
+	} else {
+		gpio_direction_output(S3C64XX_GPF(15), 0);
+		gpio_direction_output(S3C64XX_GPF(13), 0);
+	}
+}
+
+static struct plat_lcd_data smdk6410_lcd_power_data = {
+	.set_power	= smdk6410_lcd_power_set,
+};
+
+static struct platform_device smdk6410_lcd_powerdev = {
+	.name			= "platform-lcd",
+	.dev.parent		= &s3c_device_fb.dev,
+	.dev.platform_data	= &smdk6410_lcd_power_data,
+};
+
+static struct s3c_fb_pd_win smdk6410_fb_win0 = {
+	/* this is to ensure we use win0 */
+	.win_mode	= {
+		.pixclock	= 41094,
+		.left_margin	= 8,
+		.right_margin	= 13,
+		.upper_margin	= 7,
+		.lower_margin	= 5,
+		.hsync_len	= 3,
+		.vsync_len	= 1,
+		.xres		= 800,
+		.yres		= 480,
+	},
+	.max_bpp	= 32,
+	.default_bpp	= 16,
+};
+
+/* 405566 clocks per frame => 60Hz refresh requires 24333960Hz clock */
+static struct s3c_fb_platdata smdk6410_lcd_pdata __initdata = {
+	.setup_gpio	= s3c64xx_fb_gpio_setup_24bpp,
+	.win[0]		= &smdk6410_fb_win0,
+	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+};
+
+struct map_desc smdk6410_iodesc[] = {};
+
+static struct platform_device *smdk6410_devices[] __initdata = {
+#ifdef CONFIG_SMDK6410_SD_CH0
+	&s3c_device_hsmmc0,
+#endif
+#ifdef CONFIG_SMDK6410_SD_CH1
+	&s3c_device_hsmmc1,
+#endif
+	&s3c_device_i2c0,
+	&s3c_device_i2c1,
+	&s3c_device_fb,
+	&smdk6410_lcd_powerdev,
+};
+
+static struct i2c_board_info i2c_devs0[] __initdata = {
+	{ I2C_BOARD_INFO("24c08", 0x50), },
+	{ I2C_BOARD_INFO("WM8580", 0X1b), },
+};
+
+static struct i2c_board_info i2c_devs1[] __initdata = {
+	{ I2C_BOARD_INFO("24c128", 0x57), },	/* Samsung S524AD0XD1 */
+};
+
+static void __init smdk6410_map_io(void)
+{
+	s3c64xx_init_io(smdk6410_iodesc, ARRAY_SIZE(smdk6410_iodesc));
+	s3c24xx_init_clocks(12000000);
+	s3c24xx_init_uarts(smdk6410_uartcfgs, ARRAY_SIZE(smdk6410_uartcfgs));
+}
+
+static void __init smdk6410_machine_init(void)
+{
+	s3c_i2c0_set_platdata(NULL);
+	s3c_i2c1_set_platdata(NULL);
+	s3c_fb_set_platdata(&smdk6410_lcd_pdata);
+
+	i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
+	i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
+
+	platform_add_devices(smdk6410_devices, ARRAY_SIZE(smdk6410_devices));
+}
+
+MACHINE_START(SMDK6410, "SMDK6410")
+	/* Maintainer: Ben Dooks <ben@fluff.org> */
+	.phys_io	= S3C_PA_UART & 0xfff00000,
+	.io_pg_offst	= (((u32)S3C_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= S3C64XX_PA_SDRAM + 0x100,
+
+	.init_irq	= s3c6410_init_irq,
+	.map_io		= smdk6410_map_io,
+	.init_machine	= smdk6410_machine_init,
+	.timer		= &s3c24xx_timer,
+MACHINE_END

arch/arm/mach-s3c6410/setup-sdhci.c

@@ -0,0 +1,102 @@
+/* linux/arch/arm/mach-s3c6410/setup-sdhci.c
+ *
+ * Copyright 2008 Simtec Electronics
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C6410 - Helper functions for settign up SDHCI device(s) (HSMMC)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <linux/mmc/card.h>
+#include <linux/mmc/host.h>
+
+#include <mach/gpio.h>
+#include <plat/gpio-cfg.h>
+#include <plat/regs-sdhci.h>
+#include <plat/sdhci.h>
+
+/* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */
+
+char *s3c6410_hsmmc_clksrcs[4] = {
+	[0] = "hsmmc",
+	[1] = "hsmmc",
+	[2] = "mmc_bus",
+	/* [3] = "48m", - note not succesfully used yet */
+};
+
+void s3c6410_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
+{
+	unsigned int gpio;
+	unsigned int end;
+
+	end = S3C64XX_GPG(2 + width);
+
+	/* Set all the necessary GPG pins to special-function 0 */
+	for (gpio = S3C64XX_GPG(0); gpio < end; gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+
+	s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_UP);
+	s3c_gpio_cfgpin(S3C64XX_GPG(6), S3C_GPIO_SFN(2));
+}
+
+void s3c6410_setup_sdhci0_cfg_card(struct platform_device *dev,
+				    void __iomem *r,
+				    struct mmc_ios *ios,
+				    struct mmc_card *card)
+{
+	u32 ctrl2, ctrl3;
+
+	/* don't need to alter anything acording to card-type */
+
+	writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA, r + S3C64XX_SDHCI_CONTROL4);
+
+	ctrl2 = readl(r + S3C_SDHCI_CONTROL2);
+	ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK;
+	ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR |
+		  S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK |
+		  S3C_SDHCI_CTRL2_ENFBCLKRX |
+		  S3C_SDHCI_CTRL2_DFCNT_NONE |
+		  S3C_SDHCI_CTRL2_ENCLKOUTHOLD);
+
+	if (ios->clock < 25 * 1000000)
+		ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 |
+			 S3C_SDHCI_CTRL3_FCSEL2 |
+			 S3C_SDHCI_CTRL3_FCSEL1 |
+			 S3C_SDHCI_CTRL3_FCSEL0);
+	else
+		ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0);
+
+	printk(KERN_INFO "%s: CTRL 2=%08x, 3=%08x\n", __func__, ctrl2, ctrl3);
+	writel(ctrl2, r + S3C_SDHCI_CONTROL2);
+	writel(ctrl3, r + S3C_SDHCI_CONTROL3);
+}
+
+void s3c6410_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
+{
+	unsigned int gpio;
+	unsigned int end;
+
+	end = S3C64XX_GPH(2 + width);
+
+	/* Set all the necessary GPG pins to special-function 0 */
+	for (gpio = S3C64XX_GPH(0); gpio < end; gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+
+	s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_UP);
+	s3c_gpio_cfgpin(S3C64XX_GPG(6), S3C_GPIO_SFN(3));
+}

arch/arm/plat-s3c/Kconfig

@@ -6,8 +6,8 @@
 
 config PLAT_S3C
 	bool
-	depends on ARCH_S3C2410
-	default y if ARCH_S3C2410
+	depends on ARCH_S3C2410 || ARCH_S3C24A0 || ARCH_S3C64XX
+	default y
 	select NO_IOPORT
 	help
 	  Base platform code for any Samsung S3C device
@@ -16,24 +16,24 @@ config PLAT_S3C
 
 config CPU_LLSERIAL_S3C2410_ONLY
 	bool
-	depends on ARCH_S3C2410
+	depends on PLAT_S3C
 	default y if CPU_LLSERIAL_S3C2410 && !CPU_LLSERIAL_S3C2440
 
 config CPU_LLSERIAL_S3C2440_ONLY
 	bool
-	depends on ARCH_S3C2410
+	depends on PLAT_S3C
 	default y if CPU_LLSERIAL_S3C2440 && !CPU_LLSERIAL_S3C2410
 
 config CPU_LLSERIAL_S3C2410
 	bool
-	depends on ARCH_S3C2410
+	depends on PLAT_S3C
 	help
 	  Selected if there is an S3C2410 (or register compatible) serial
 	  low-level implementation needed
 
 config CPU_LLSERIAL_S3C2440
 	bool
-	depends on ARCH_S3C2410
+	depends on PLAT_S3C
 	help
 	  Selected if there is an S3C2440 (or register compatible) serial
 	  low-level implementation needed
@@ -57,6 +57,14 @@ config S3C_BOOT_ERROR_RESET
 	  Say y here to use the watchdog to reset the system if the
 	  kernel decompressor detects an error during decompression.
 
+config S3C_BOOT_UART_FORCE_FIFO
+       bool "Force UART FIFO on during boot process"
+       depends on PLAT_S3C
+       default y
+       help
+         Say Y here to force the UART FIFOs on during the kernel
+	 uncompressor
+
 comment "Power management"
 
 config S3C2410_PM_DEBUG
@@ -102,3 +110,73 @@ config S3C_LOWLEVEL_UART_PORT
 	  such as the `Uncompressing...` at start time. The value of
 	  this configuration should be between zero and two. The port
 	  must have been initialised by the boot-loader before use.
+
+# options for gpiolib support
+
+config S3C_GPIO_SPACE
+	int "Space between gpio banks"
+	default 0
+	help
+	  Add a number of spare GPIO entries between each bank for debugging
+	  purposes. This allows any problems where an counter overflows from
+	  one bank to another to be caught, at the expense of using a little
+	  more memory.
+
+config S3C_GPIO_TRACK
+	bool
+	help
+	  Internal configuration option to enable the s3c specific gpio
+	  chip tracking if the platform requires it.
+
+config S3C_GPIO_PULL_UPDOWN
+	bool
+	help
+	  Internal configuration to enable the correct GPIO pull helper
+
+config S3C_GPIO_PULL_DOWN
+	bool
+	help
+	  Internal configuration to enable the correct GPIO pull helper
+
+config S3C_GPIO_PULL_UP
+	bool
+	help
+	  Internal configuration to enable the correct GPIO pull helper
+
+config S3C_GPIO_CFG_S3C24XX
+	bool
+	help
+	  Internal configuration to enable S3C24XX style GPIO configuration
+	  functions.
+
+config S3C_GPIO_CFG_S3C64XX
+	bool
+	help
+	  Internal configuration to enable S3C64XX style GPIO configuration
+	  functions.
+
+# device definitions to compile in
+
+config S3C_DEV_HSMMC
+	bool
+	depends on PLAT_S3C
+	help
+	  Compile in platform device definitions for HSMMC code
+
+config S3C_DEV_HSMMC1
+	bool
+	depends on PLAT_S3C
+	help
+	  Compile in platform device definitions for HSMMC channel 1
+
+config S3C_DEV_I2C1
+	bool
+	depends on PLAT_S3C
+	help
+	  Compile in platform device definitions for I2C channel 1
+
+config S3C_DEV_FB
+	bool
+	depends on PLAT_S3C
+	help
+	  Compile in platform device definition for framebuffer

arch/arm/plat-s3c/Makefile

@@ -1,3 +1,27 @@
-# dummy makefile, currently just including asm/arm/plat-s3c/include/plat
+# arch/arm/plat-s3c/Makefile
+#
+# Copyright 2008 Simtec Electronics
+#
+# Licensed under GPLv2
 
-obj-n	:= dummy.o
+obj-y				:=
+obj-m				:=
+obj-n				:=
+obj-				:=
+
+# Core support for all Samsung SoCs
+
+obj-y				+=  init.o
+obj-y				+= time.o
+obj-y				+= clock.o
+obj-y				+= pwm-clock.o
+obj-y				+= gpio.o
+obj-y				+= gpio-config.o
+
+# devices
+
+obj-$(CONFIG_S3C_DEV_HSMMC)	+= dev-hsmmc.o
+obj-$(CONFIG_S3C_DEV_HSMMC1)	+= dev-hsmmc1.o
+obj-y				+= dev-i2c0.o
+obj-$(CONFIG_S3C_DEV_I2C1)	+= dev-i2c1.o
+obj-$(CONFIG_S3C_DEV_FB)	+= dev-fb.o

arch/arm/plat-s3c/clock.c

@@ -0,0 +1,368 @@
+/* linux/arch/arm/plat-s3c24xx/clock.c
+ *
+ * Copyright (c) 2004-2005 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX Core clock control support
+ *
+ * Based on, and code from linux/arch/arm/mach-versatile/clock.c
+ **
+ **  Copyright (C) 2004 ARM Limited.
+ **  Written by Deep Blue Solutions Limited.
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/sysdev.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/clk.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <asm/irq.h>
+
+#include <plat/cpu-freq.h>
+
+#include <plat/clock.h>
+#include <plat/cpu.h>
+
+/* clock information */
+
+static LIST_HEAD(clocks);
+
+/* We originally used an mutex here, but some contexts (see resume)
+ * are calling functions such as clk_set_parent() with IRQs disabled
+ * causing an BUG to be triggered.
+ */
+DEFINE_SPINLOCK(clocks_lock);
+
+/* enable and disable calls for use with the clk struct */
+
+static int clk_null_enable(struct clk *clk, int enable)
+{
+	return 0;
+}
+
+/* Clock API calls */
+
+struct clk *clk_get(struct device *dev, const char *id)
+{
+	struct clk *p;
+	struct clk *clk = ERR_PTR(-ENOENT);
+	int idno;
+
+	if (dev == NULL || dev->bus != &platform_bus_type)
+		idno = -1;
+	else
+		idno = to_platform_device(dev)->id;
+
+	spin_lock(&clocks_lock);
+
+	list_for_each_entry(p, &clocks, list) {
+		if (p->id == idno &&
+		    strcmp(id, p->name) == 0 &&
+		    try_module_get(p->owner)) {
+			clk = p;
+			break;
+		}
+	}
+
+	/* check for the case where a device was supplied, but the
+	 * clock that was being searched for is not device specific */
+
+	if (IS_ERR(clk)) {
+		list_for_each_entry(p, &clocks, list) {
+			if (p->id == -1 && strcmp(id, p->name) == 0 &&
+			    try_module_get(p->owner)) {
+				clk = p;
+				break;
+			}
+		}
+	}
+
+	spin_unlock(&clocks_lock);
+	return clk;
+}
+
+void clk_put(struct clk *clk)
+{
+	module_put(clk->owner);
+}
+
+int clk_enable(struct clk *clk)
+{
+	if (IS_ERR(clk) || clk == NULL)
+		return -EINVAL;
+
+	clk_enable(clk->parent);
+
+	spin_lock(&clocks_lock);
+
+	if ((clk->usage++) == 0)
+		(clk->enable)(clk, 1);
+
+	spin_unlock(&clocks_lock);
+	return 0;
+}
+
+void clk_disable(struct clk *clk)
+{
+	if (IS_ERR(clk) || clk == NULL)
+		return;
+
+	spin_lock(&clocks_lock);
+
+	if ((--clk->usage) == 0)
+		(clk->enable)(clk, 0);
+
+	spin_unlock(&clocks_lock);
+	clk_disable(clk->parent);
+}
+
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+	if (IS_ERR(clk))
+		return 0;
+
+	if (clk->rate != 0)
+		return clk->rate;
+
+	if (clk->get_rate != NULL)
+		return (clk->get_rate)(clk);
+
+	if (clk->parent != NULL)
+		return clk_get_rate(clk->parent);
+
+	return clk->rate;
+}
+
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+	if (!IS_ERR(clk) && clk->round_rate)
+		return (clk->round_rate)(clk, rate);
+
+	return rate;
+}
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+	int ret;
+
+	if (IS_ERR(clk))
+		return -EINVAL;
+
+	/* We do not default just do a clk->rate = rate as
+	 * the clock may have been made this way by choice.
+	 */
+
+	WARN_ON(clk->set_rate == NULL);
+
+	if (clk->set_rate == NULL)
+		return -EINVAL;
+
+	spin_lock(&clocks_lock);
+	ret = (clk->set_rate)(clk, rate);
+	spin_unlock(&clocks_lock);
+
+	return ret;
+}
+
+struct clk *clk_get_parent(struct clk *clk)
+{
+	return clk->parent;
+}
+
+int clk_set_parent(struct clk *clk, struct clk *parent)
+{
+	int ret = 0;
+
+	if (IS_ERR(clk))
+		return -EINVAL;
+
+	spin_lock(&clocks_lock);
+
+	if (clk->set_parent)
+		ret = (clk->set_parent)(clk, parent);
+
+	spin_unlock(&clocks_lock);
+
+	return ret;
+}
+
+EXPORT_SYMBOL(clk_get);
+EXPORT_SYMBOL(clk_put);
+EXPORT_SYMBOL(clk_enable);
+EXPORT_SYMBOL(clk_disable);
+EXPORT_SYMBOL(clk_get_rate);
+EXPORT_SYMBOL(clk_round_rate);
+EXPORT_SYMBOL(clk_set_rate);
+EXPORT_SYMBOL(clk_get_parent);
+EXPORT_SYMBOL(clk_set_parent);
+
+/* base clocks */
+
+static int clk_default_setrate(struct clk *clk, unsigned long rate)
+{
+	clk->rate = rate;
+	return 0;
+}
+
+struct clk clk_xtal = {
+	.name		= "xtal",
+	.id		= -1,
+	.rate		= 0,
+	.parent		= NULL,
+	.ctrlbit	= 0,
+};
+
+struct clk clk_ext = {
+	.name		= "ext",
+	.id		= -1,
+};
+
+struct clk clk_epll = {
+	.name		= "epll",
+	.id		= -1,
+};
+
+struct clk clk_mpll = {
+	.name		= "mpll",
+	.id		= -1,
+	.set_rate	= clk_default_setrate,
+};
+
+struct clk clk_upll = {
+	.name		= "upll",
+	.id		= -1,
+	.parent		= NULL,
+	.ctrlbit	= 0,
+};
+
+struct clk clk_f = {
+	.name		= "fclk",
+	.id		= -1,
+	.rate		= 0,
+	.parent		= &clk_mpll,
+	.ctrlbit	= 0,
+	.set_rate	= clk_default_setrate,
+};
+
+struct clk clk_h = {
+	.name		= "hclk",
+	.id		= -1,
+	.rate		= 0,
+	.parent		= NULL,
+	.ctrlbit	= 0,
+	.set_rate	= clk_default_setrate,
+};
+
+struct clk clk_p = {
+	.name		= "pclk",
+	.id		= -1,
+	.rate		= 0,
+	.parent		= NULL,
+	.ctrlbit	= 0,
+	.set_rate	= clk_default_setrate,
+};
+
+struct clk clk_usb_bus = {
+	.name		= "usb-bus",
+	.id		= -1,
+	.rate		= 0,
+	.parent		= &clk_upll,
+};
+
+
+
+struct clk s3c24xx_uclk = {
+	.name		= "uclk",
+	.id		= -1,
+};
+
+/* initialise the clock system */
+
+int s3c24xx_register_clock(struct clk *clk)
+{
+	clk->owner = THIS_MODULE;
+
+	if (clk->enable == NULL)
+		clk->enable = clk_null_enable;
+
+	/* add to the list of available clocks */
+
+	/* Quick check to see if this clock has already been registered. */
+	BUG_ON(clk->list.prev != clk->list.next);
+
+	spin_lock(&clocks_lock);
+	list_add(&clk->list, &clocks);
+	spin_unlock(&clocks_lock);
+
+	return 0;
+}
+
+int s3c24xx_register_clocks(struct clk **clks, int nr_clks)
+{
+	int fails = 0;
+
+	for (; nr_clks > 0; nr_clks--, clks++) {
+		if (s3c24xx_register_clock(*clks) < 0)
+			fails++;
+	}
+
+	return fails;
+}
+
+/* initalise all the clocks */
+
+int __init s3c24xx_register_baseclocks(unsigned long xtal)
+{
+	printk(KERN_INFO "S3C24XX Clocks, (c) 2004 Simtec Electronics\n");
+
+	clk_xtal.rate = xtal;
+
+	/* register our clocks */
+
+	if (s3c24xx_register_clock(&clk_xtal) < 0)
+		printk(KERN_ERR "failed to register master xtal\n");
+
+	if (s3c24xx_register_clock(&clk_mpll) < 0)
+		printk(KERN_ERR "failed to register mpll clock\n");
+
+	if (s3c24xx_register_clock(&clk_upll) < 0)
+		printk(KERN_ERR "failed to register upll clock\n");
+
+	if (s3c24xx_register_clock(&clk_f) < 0)
+		printk(KERN_ERR "failed to register cpu fclk\n");
+
+	if (s3c24xx_register_clock(&clk_h) < 0)
+		printk(KERN_ERR "failed to register cpu hclk\n");
+
+	if (s3c24xx_register_clock(&clk_p) < 0)
+		printk(KERN_ERR "failed to register cpu pclk\n");
+
+	return 0;
+}
+

arch/arm/plat-s3c/dev-fb.c

@@ -0,0 +1,72 @@
+/* linux/arch/arm/plat-s3c/dev-fb.c
+ *
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C series device definition for framebuffer device
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+#include <linux/fb.h>
+
+#include <mach/map.h>
+#include <mach/regs-fb.h>
+
+#include <plat/fb.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+static struct resource s3c_fb_resource[] = {
+	[0] = {
+		.start = S3C_PA_FB,
+		.end   = S3C_PA_FB + SZ_16K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_LCD_VSYNC,
+		.end   = IRQ_LCD_VSYNC,
+		.flags = IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start = IRQ_LCD_FIFO,
+		.end   = IRQ_LCD_FIFO,
+		.flags = IORESOURCE_IRQ,
+	},
+	[3] = {
+		.start = IRQ_LCD_SYSTEM,
+		.end   = IRQ_LCD_SYSTEM,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device s3c_device_fb = {
+	.name		  = "s3c-fb",
+	.id		  = -1,
+	.num_resources	  = ARRAY_SIZE(s3c_fb_resource),
+	.resource	  = s3c_fb_resource,
+	.dev.dma_mask	  = &s3c_device_fb.dev.coherent_dma_mask,
+	.dev.coherent_dma_mask = 0xffffffffUL,
+};
+
+void __init s3c_fb_set_platdata(struct s3c_fb_platdata *pd)
+{
+	struct s3c_fb_platdata *npd;
+
+	if (!pd) {
+		printk(KERN_ERR "%s: no platform data\n", __func__);
+		return;
+	}
+
+	npd = kmemdup(pd, sizeof(struct s3c_fb_platdata), GFP_KERNEL);
+	if (!npd)
+		printk(KERN_ERR "%s: no memory for platform data\n", __func__);
+
+	s3c_device_fb.dev.platform_data = npd;
+}

arch/arm/plat-s3c/dev-hsmmc.c

@@ -0,0 +1,68 @@
+/* linux/arch/arm/plat-s3c/dev-hsmmc.c
+ *
+ * Copyright (c) 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C series device definition for hsmmc devices
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/mmc/host.h>
+
+#include <mach/map.h>
+#include <plat/sdhci.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+#define S3C_SZ_HSMMC	(0x1000)
+
+static struct resource s3c_hsmmc_resource[] = {
+	[0] = {
+		.start = S3C_PA_HSMMC0,
+		.end   = S3C_PA_HSMMC0 + S3C_SZ_HSMMC - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_HSMMC0,
+		.end   = IRQ_HSMMC0,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static u64 s3c_device_hsmmc_dmamask = 0xffffffffUL;
+
+struct s3c_sdhci_platdata s3c_hsmmc0_def_platdata = {
+	.max_width	= 4,
+	.host_caps	= (MMC_CAP_4_BIT_DATA |
+			   MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
+};
+
+struct platform_device s3c_device_hsmmc0 = {
+	.name		= "s3c-sdhci",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(s3c_hsmmc_resource),
+	.resource	= s3c_hsmmc_resource,
+	.dev		= {
+		.dma_mask		= &s3c_device_hsmmc_dmamask,
+		.coherent_dma_mask	= 0xffffffffUL,
+		.platform_data		= &s3c_hsmmc0_def_platdata,
+	},
+};
+
+void s3c_sdhci0_set_platdata(struct s3c_sdhci_platdata *pd)
+{
+	struct s3c_sdhci_platdata *set = &s3c_hsmmc0_def_platdata;
+
+	set->max_width = pd->max_width;
+
+	if (pd->cfg_gpio)
+		set->cfg_gpio = pd->cfg_gpio;
+	if (pd->cfg_card)
+		set->cfg_card = pd->cfg_card;
+}

arch/arm/plat-s3c/dev-hsmmc1.c

@@ -0,0 +1,68 @@
+/* linux/arch/arm/plat-s3c/dev-hsmmc1.c
+ *
+ * Copyright (c) 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C series device definition for hsmmc device 1
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/mmc/host.h>
+
+#include <mach/map.h>
+#include <plat/sdhci.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+#define S3C_SZ_HSMMC	(0x1000)
+
+static struct resource s3c_hsmmc1_resource[] = {
+	[0] = {
+		.start = S3C_PA_HSMMC1,
+		.end   = S3C_PA_HSMMC1 + S3C_SZ_HSMMC - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_HSMMC1,
+		.end   = IRQ_HSMMC1,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static u64 s3c_device_hsmmc1_dmamask = 0xffffffffUL;
+
+struct s3c_sdhci_platdata s3c_hsmmc1_def_platdata = {
+	.max_width	= 4,
+	.host_caps	= (MMC_CAP_4_BIT_DATA |
+			   MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
+};
+
+struct platform_device s3c_device_hsmmc1 = {
+	.name		= "s3c-sdhci",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(s3c_hsmmc1_resource),
+	.resource	= s3c_hsmmc1_resource,
+	.dev		= {
+		.dma_mask		= &s3c_device_hsmmc1_dmamask,
+		.coherent_dma_mask	= 0xffffffffUL,
+		.platform_data		= &s3c_hsmmc1_def_platdata,
+	},
+};
+
+void s3c_sdhci1_set_platdata(struct s3c_sdhci_platdata *pd)
+{
+	struct s3c_sdhci_platdata *set = &s3c_hsmmc1_def_platdata;
+
+	set->max_width = pd->max_width;
+
+	if (pd->cfg_gpio)
+		set->cfg_gpio = pd->cfg_gpio;
+	if (pd->cfg_card)
+		set->cfg_card = pd->cfg_card;
+}

arch/arm/plat-s3c/dev-i2c0.c

@@ -0,0 +1,71 @@
+/* linux/arch/arm/plat-s3c/dev-i2c0.c
+ *
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C series device definition for i2c device 0
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+
+#include <mach/map.h>
+
+#include <plat/regs-iic.h>
+#include <plat/iic.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+static struct resource s3c_i2c_resource[] = {
+	[0] = {
+		.start = S3C_PA_IIC,
+		.end   = S3C_PA_IIC + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_IIC,
+		.end   = IRQ_IIC,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device s3c_device_i2c0 = {
+	.name		  = "s3c2410-i2c",
+#ifdef CONFIG_S3C_DEV_I2C1
+	.id		  = 0,
+#else
+	.id		  = -1,
+#endif
+	.num_resources	  = ARRAY_SIZE(s3c_i2c_resource),
+	.resource	  = s3c_i2c_resource,
+};
+
+static struct s3c2410_platform_i2c default_i2c_data0 __initdata = {
+	.flags		= 0,
+	.slave_addr	= 0x10,
+	.bus_freq	= 100*1000,
+	.max_freq	= 400*1000,
+	.sda_delay	= S3C2410_IICLC_SDA_DELAY5 | S3C2410_IICLC_FILTER_ON,
+};
+
+void __init s3c_i2c0_set_platdata(struct s3c2410_platform_i2c *pd)
+{
+	struct s3c2410_platform_i2c *npd;
+
+	if (!pd)
+		pd = &default_i2c_data0;
+
+	npd = kmemdup(pd, sizeof(struct s3c2410_platform_i2c), GFP_KERNEL);
+	if (!npd)
+		printk(KERN_ERR "%s: no memory for platform data\n", __func__);
+	else if (!npd->cfg_gpio)
+		npd->cfg_gpio = s3c_i2c0_cfg_gpio;
+
+	s3c_device_i2c0.dev.platform_data = npd;
+}

arch/arm/plat-s3c/dev-i2c1.c

@@ -0,0 +1,68 @@
+/* linux/arch/arm/plat-s3c/dev-i2c1.c
+ *
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C series device definition for i2c device 1
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+
+#include <mach/map.h>
+
+#include <plat/regs-iic.h>
+#include <plat/iic.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+static struct resource s3c_i2c_resource[] = {
+	[0] = {
+		.start = S3C_PA_IIC1,
+		.end   = S3C_PA_IIC1 + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_IIC1,
+		.end   = IRQ_IIC1,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device s3c_device_i2c1 = {
+	.name		  = "s3c2410-i2c",
+	.id		  = 1,
+	.num_resources	  = ARRAY_SIZE(s3c_i2c_resource),
+	.resource	  = s3c_i2c_resource,
+};
+
+static struct s3c2410_platform_i2c default_i2c_data1 __initdata = {
+	.flags		= 0,
+	.bus_num	= 1,
+	.slave_addr	= 0x10,
+	.bus_freq	= 100*1000,
+	.max_freq	= 400*1000,
+	.sda_delay	= S3C2410_IICLC_SDA_DELAY5 | S3C2410_IICLC_FILTER_ON,
+};
+
+void __init s3c_i2c1_set_platdata(struct s3c2410_platform_i2c *pd)
+{
+	struct s3c2410_platform_i2c *npd;
+
+	if (!pd)
+		pd = &default_i2c_data1;
+
+	npd = kmemdup(pd, sizeof(struct s3c2410_platform_i2c), GFP_KERNEL);
+	if (!npd)
+		printk(KERN_ERR "%s: no memory for platform data\n", __func__);
+	else if (!npd->cfg_gpio)
+		npd->cfg_gpio = s3c_i2c1_cfg_gpio;
+
+	s3c_device_i2c1.dev.platform_data = npd;
+}

arch/arm/plat-s3c/gpio-config.c

@@ -0,0 +1,163 @@
+/* linux/arch/arm/plat-s3c/gpio-config.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C series GPIO configuration core
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+#include <linux/io.h>
+
+#include <mach/gpio-core.h>
+#include <plat/gpio-cfg.h>
+#include <plat/gpio-cfg-helpers.h>
+
+int s3c_gpio_cfgpin(unsigned int pin, unsigned int config)
+{
+	struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
+	unsigned long flags;
+	int offset;
+	int ret;
+
+	if (!chip)
+		return -EINVAL;
+
+	offset = pin - chip->chip.base;
+
+	local_irq_save(flags);
+	ret = s3c_gpio_do_setcfg(chip, offset, config);
+	local_irq_restore(flags);
+
+	return ret;
+}
+
+int s3c_gpio_setpull(unsigned int pin, s3c_gpio_pull_t pull)
+{
+	struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
+	unsigned long flags;
+	int offset, ret;
+
+	if (!chip)
+		return -EINVAL;
+
+	offset = pin - chip->chip.base;
+
+	local_irq_save(flags);
+	ret = s3c_gpio_do_setpull(chip, offset, pull);
+	local_irq_restore(flags);
+
+	return ret;
+}
+
+#ifdef CONFIG_S3C_GPIO_CFG_S3C24XX
+int s3c_gpio_setcfg_s3c24xx_banka(struct s3c_gpio_chip *chip,
+				  unsigned int off, unsigned int cfg)
+{
+	void __iomem *reg = chip->base;
+	unsigned int shift = off;
+	u32 con;
+
+	if (s3c_gpio_is_cfg_special(cfg)) {
+		cfg &= 0xf;
+
+		/* Map output to 0, and SFN2 to 1 */
+		cfg -= 1;
+		if (cfg > 1)
+			return -EINVAL;
+
+		cfg <<= shift;
+	}
+
+	con = __raw_readl(reg);
+	con &= ~(0x1 << shift);
+	con |= cfg;
+	__raw_writel(con, reg);
+
+	return 0;
+}
+
+int s3c_gpio_setcfg_s3c24xx(struct s3c_gpio_chip *chip,
+			    unsigned int off, unsigned int cfg)
+{
+	void __iomem *reg = chip->base;
+	unsigned int shift = off * 2;
+	u32 con;
+
+	if (s3c_gpio_is_cfg_special(cfg)) {
+		cfg &= 0xf;
+		if (cfg > 3)
+			return -EINVAL;
+
+		cfg <<= shift;
+	}
+
+	con = __raw_readl(reg);
+	con &= ~(0x3 << shift);
+	con |= cfg;
+	__raw_writel(con, reg);
+
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_S3C_GPIO_CFG_S3C64XX
+int s3c_gpio_setcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip,
+				 unsigned int off, unsigned int cfg)
+{
+	void __iomem *reg = chip->base;
+	unsigned int shift = (off & 7) * 4;
+	u32 con;
+
+	if (off < 8 && chip->chip.ngpio >= 8)
+		reg -= 4;
+
+	if (s3c_gpio_is_cfg_special(cfg)) {
+		cfg &= 0xf;
+		cfg <<= shift;
+	}
+
+	con = __raw_readl(reg);
+	con &= ~(0xf << shift);
+	con |= cfg;
+	__raw_writel(con, reg);
+
+	return 0;
+}
+#endif /* CONFIG_S3C_GPIO_CFG_S3C64XX */
+
+#ifdef CONFIG_S3C_GPIO_PULL_UPDOWN
+int s3c_gpio_setpull_updown(struct s3c_gpio_chip *chip,
+			    unsigned int off, s3c_gpio_pull_t pull)
+{
+	void __iomem *reg = chip->base + 0x08;
+	int shift = off * 2;
+	u32 pup;
+
+	pup = __raw_readl(reg);
+	pup &= ~(3 << shift);
+	pup |= pull << shift;
+	__raw_writel(pup, reg);
+
+	return 0;
+}
+
+s3c_gpio_pull_t s3c_gpio_getpull_updown(struct s3c_gpio_chip *chip,
+					unsigned int off)
+{
+	void __iomem *reg = chip->base + 0x08;
+	int shift = off * 2;
+	u32 pup = __raw_readl(reg);
+
+	pup >>= shift;
+	pup &= 0x3;
+	return (__force s3c_gpio_pull_t)pup;
+}
+#endif

arch/arm/plat-s3c/gpio.c

@@ -0,0 +1,147 @@
+/* linux/arch/arm/plat-s3c/gpio.c
+ *
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C series GPIO core
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include <plat/gpio-core.h>
+
+#ifdef CONFIG_S3C_GPIO_TRACK
+struct s3c_gpio_chip *s3c_gpios[S3C_GPIO_END];
+
+static __init void s3c_gpiolib_track(struct s3c_gpio_chip *chip)
+{
+	unsigned int gpn;
+	int i;
+
+	gpn = chip->chip.base;
+	for (i = 0; i < chip->chip.ngpio; i++, gpn++) {
+		BUG_ON(gpn > ARRAY_SIZE(s3c_gpios));
+		s3c_gpios[gpn] = chip;
+	}
+}
+#endif /* CONFIG_S3C_GPIO_TRACK */
+
+/* Default routines for controlling GPIO, based on the original S3C24XX
+ * GPIO functions which deal with the case where each gpio bank of the
+ * chip is as following:
+ *
+ * base + 0x00: Control register, 2 bits per gpio
+ *	        gpio n: 2 bits starting at (2*n)
+ *		00 = input, 01 = output, others mean special-function
+ * base + 0x04: Data register, 1 bit per gpio
+ *		bit n: data bit n
+*/
+
+static int s3c_gpiolib_input(struct gpio_chip *chip, unsigned offset)
+{
+	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
+	void __iomem *base = ourchip->base;
+	unsigned long flags;
+	unsigned long con;
+
+	local_irq_save(flags);
+
+	con = __raw_readl(base + 0x00);
+	con &= ~(3 << (offset * 2));
+
+	__raw_writel(con, base + 0x00);
+
+	local_irq_restore(flags);
+	return 0;
+}
+
+static int s3c_gpiolib_output(struct gpio_chip *chip,
+			      unsigned offset, int value)
+{
+	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
+	void __iomem *base = ourchip->base;
+	unsigned long flags;
+	unsigned long dat;
+	unsigned long con;
+
+	local_irq_save(flags);
+
+	dat = __raw_readl(base + 0x04);
+	dat &= ~(1 << offset);
+	if (value)
+		dat |= 1 << offset;
+	__raw_writel(dat, base + 0x04);
+
+	con = __raw_readl(base + 0x00);
+	con &= ~(3 << (offset * 2));
+	con |= 1 << (offset * 2);
+
+	__raw_writel(con, base + 0x00);
+	__raw_writel(dat, base + 0x04);
+
+	local_irq_restore(flags);
+	return 0;
+}
+
+static void s3c_gpiolib_set(struct gpio_chip *chip,
+			    unsigned offset, int value)
+{
+	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
+	void __iomem *base = ourchip->base;
+	unsigned long flags;
+	unsigned long dat;
+
+	local_irq_save(flags);
+
+	dat = __raw_readl(base + 0x04);
+	dat &= ~(1 << offset);
+	if (value)
+		dat |= 1 << offset;
+	__raw_writel(dat, base + 0x04);
+
+	local_irq_restore(flags);
+}
+
+static int s3c_gpiolib_get(struct gpio_chip *chip, unsigned offset)
+{
+	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
+	unsigned long val;
+
+	val = __raw_readl(ourchip->base + 0x04);
+	val >>= offset;
+	val &= 1;
+
+	return val;
+}
+
+__init void s3c_gpiolib_add(struct s3c_gpio_chip *chip)
+{
+	struct gpio_chip *gc = &chip->chip;
+	int ret;
+
+	BUG_ON(!chip->base);
+	BUG_ON(!gc->label);
+	BUG_ON(!gc->ngpio);
+
+	if (!gc->direction_input)
+		gc->direction_input = s3c_gpiolib_input;
+	if (!gc->direction_output)
+		gc->direction_output = s3c_gpiolib_output;
+	if (!gc->set)
+		gc->set = s3c_gpiolib_set;
+	if (!gc->get)
+		gc->get = s3c_gpiolib_get;
+
+	/* gpiochip_add() prints own failure message on error. */
+	ret = gpiochip_add(gc);
+	if (ret >= 0)
+		s3c_gpiolib_track(chip);
+}

arch/arm/plat-s3c/include/mach/io.h

@@ -0,0 +1,18 @@
+/* arch/arm/plat-s3c/include/mach/io.h
+ *
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben-linux@fluff.org>
+ *
+ * Default IO routines for plat-s3c based systems, such as S3C24A0
+ */
+
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+/* No current ISA/PCI bus support. */
+#define __io(a)		((void __iomem *)(a))
+#define __mem_pci(a)	(a)
+
+#define IO_SPACE_LIMIT (0xFFFFFFFF)
+
+#endif

arch/arm/mach-s3c2410/include/mach/vmalloc.h → arch/arm/plat-s3c/include/mach/vmalloc.h

@@ -1,4 +1,4 @@
-/* arch/arm/mach-s3c2410/include/mach/vmalloc.h
+/* arch/arm/plat-s3c/include/mach/vmalloc.h
  *
  * from arch/arm/mach-iop3xx/include/mach/vmalloc.h
  *

arch/arm/plat-s3c/include/plat/adc.h

@@ -0,0 +1,29 @@
+/* arch/arm/plat-s3c/include/plat/adc.h
+ *
+ * Copyright (c) 2008 Simtec Electronics
+ *	http://armlinux.simnte.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX ADC driver information
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_PLAT_ADC_H
+#define __ASM_PLAT_ADC_H __FILE__
+
+struct s3c_adc_client;
+
+extern int s3c_adc_start(struct s3c_adc_client *client,
+			 unsigned int channel, unsigned int nr_samples);
+
+extern struct s3c_adc_client *s3c_adc_register(struct platform_device *pdev,
+					       void (*select)(unsigned selected),
+					       void (*conv)(unsigned d0, unsigned d1),
+					       unsigned int is_ts);
+
+extern void s3c_adc_release(struct s3c_adc_client *client);
+
+#endif /* __ASM_PLAT_ADC_H */

arch/arm/plat-s3c24xx/include/plat/clock.h → arch/arm/plat-s3c/include/plat/clock.h

@@ -1,5 +1,4 @@
-/* linux/include/asm-arm/plat-s3c24xx/clock.h
- * linux/arch/arm/mach-s3c2410/clock.h
+/* linux/arch/arm/plat-s3c/include/plat/clock.h
  *
  * Copyright (c) 2004-2005 Simtec Electronics
  *	http://www.simtec.co.uk/products/SWLINUX/
@@ -10,6 +9,8 @@
  * published by the Free Software Foundation.
 */
 
+#include <linux/spinlock.h>
+
 struct clk {
 	struct list_head      list;
 	struct module        *owner;
@@ -44,21 +45,44 @@ extern struct clk clk_h;
 extern struct clk clk_p;
 extern struct clk clk_mpll;
 extern struct clk clk_upll;
+extern struct clk clk_epll;
 extern struct clk clk_xtal;
+extern struct clk clk_ext;
+
+/* S3C64XX specific clocks */
+extern struct clk clk_27m;
+extern struct clk clk_48m;
 
 /* exports for arch/arm/mach-s3c2410
  *
  * Please DO NOT use these outside of arch/arm/mach-s3c2410
 */
 
-extern struct mutex clocks_mutex;
+extern spinlock_t clocks_lock;
 
 extern int s3c2410_clkcon_enable(struct clk *clk, int enable);
 
 extern int s3c24xx_register_clock(struct clk *clk);
 extern int s3c24xx_register_clocks(struct clk **clk, int nr_clks);
 
-extern int s3c24xx_setup_clocks(unsigned long xtal,
-				unsigned long fclk,
-				unsigned long hclk,
-				unsigned long pclk);
+extern int s3c24xx_register_baseclocks(unsigned long xtal);
+
+extern void s3c64xx_register_clocks(void);
+
+extern void s3c24xx_setup_clocks(unsigned long fclk,
+				 unsigned long hclk,
+				 unsigned long pclk);
+
+extern void s3c2410_setup_clocks(void);
+extern void s3c2412_setup_clocks(void);
+extern void s3c244x_setup_clocks(void);
+extern void s3c2443_setup_clocks(void);
+
+/* S3C64XX specific functions and clocks */
+
+extern int s3c64xx_sclk_ctrl(struct clk *clk, int enable);
+
+/* Init for pwm clock code */
+
+extern void s3c_pwmclk_init(void);
+

arch/arm/plat-s3c/include/plat/cpu-freq.h

@@ -0,0 +1,94 @@
+/* arch/arm/plat-s3c/include/plat/cpu-freq.h
+ *
+ * Copyright (c) 2006,2007 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C CPU frequency scaling support - driver and board
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/cpufreq.h>
+
+struct s3c_cpufreq_info;
+struct s3c_cpufreq_board;
+struct s3c_iotimings;
+
+struct s3c_freq {
+	unsigned long	fclk;
+	unsigned long	armclk;
+	unsigned long	hclk_tns;	/* in 10ths of ns */
+	unsigned long	hclk;
+	unsigned long	pclk;
+};
+
+/* wrapper 'struct cpufreq_freqs' so that any drivers receiving the
+ * notification can use this information that is not provided by just
+ * having the core frequency alone.
+ */
+
+struct s3c_cpufreq_freqs {
+	struct cpufreq_freqs	freqs;
+	struct s3c_freq		old;
+	struct s3c_freq		new;
+};
+
+#define to_s3c_cpufreq(_cf) container_of(_cf, struct s3c_cpufreq_freqs, freqs)
+
+struct s3c_clkdivs {
+	int		p_divisor;	/* fclk / pclk */
+	int		h_divisor;	/* fclk / hclk */
+	int		arm_divisor;	/* not all cpus have this. */
+	unsigned char	dvs;		/* using dvs mode to arm. */
+};
+
+#define PLLVAL(_m, _p, _s) (((_m) << 12) | ((_p) << 4) | (_s))
+
+struct s3c_pllval {
+	unsigned long		freq;
+	unsigned long		pll_reg;
+};
+
+struct s3c_cpufreq_config {
+	struct s3c_freq		freq;
+	struct s3c_pllval	pll;
+	struct s3c_clkdivs	divs;
+	struct s3c_cpufreq_info *info;	/* for core, not drivers */
+	struct s3c_cpufreq_board *board;
+};
+
+/* s3c_cpufreq_board
+ *
+ * per-board configuraton information, such as memory refresh and
+ * how to initialise IO timings.
+ */
+struct s3c_cpufreq_board {
+	unsigned int	refresh;	/* refresh period in ns */
+	unsigned int	auto_io:1;	/* automatically init io timings. */
+	unsigned int	need_io:1;	/* set if needs io timing support. */
+
+	/* any non-zero field in here is taken as an upper limit. */
+	struct s3c_freq	max;	/* frequency limits */
+};
+
+/* Things depending on frequency scaling. */
+#ifdef CONFIG_CPU_FREQ_S3C
+#define __init_or_cpufreq
+#else
+#define __init_or_cpufreq __init
+#endif
+
+/* Board functions */
+
+#ifdef CONFIG_CPU_FREQ_S3C
+extern int s3c_cpufreq_setboard(struct s3c_cpufreq_board *board);
+#else
+
+static inline int s3c_cpufreq_setboard(struct s3c_cpufreq_board *board)
+{
+	return 0;
+}
+#endif  /* CONFIG_CPU_FREQ_S3C */

arch/arm/plat-s3c24xx/include/plat/cpu.h → arch/arm/plat-s3c/include/plat/cpu.h

@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/plat-s3c24xx/cpu.h
+/* linux/arch/arm/plat-s3c/include/plat/cpu.h
  *
  * Copyright (c) 2004-2005 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
@@ -18,7 +18,7 @@
 #define MHZ (1000*1000)
 #endif
 
-#define print_mhz(m) ((m) / MHZ), ((m / 1000) % 1000)
+#define print_mhz(m) ((m) / MHZ), (((m) / 1000) % 1000)
 
 /* forward declaration */
 struct s3c24xx_uart_resources;
@@ -26,11 +26,28 @@ struct platform_device;
 struct s3c2410_uartcfg;
 struct map_desc;
 
+/* per-cpu initialisation function table. */
+
+struct cpu_table {
+	unsigned long	idcode;
+	unsigned long	idmask;
+	void		(*map_io)(void);
+	void		(*init_uarts)(struct s3c2410_uartcfg *cfg, int no);
+	void		(*init_clocks)(int xtal);
+	int		(*init)(void);
+	const char	*name;
+};
+
+extern void s3c_init_cpu(unsigned long idcode,
+			 struct cpu_table *cpus, unsigned int cputab_size);
+
 /* core initialisation functions */
 
 extern void s3c24xx_init_irq(void);
+extern void s3c64xx_init_irq(u32 vic0, u32 vic1);
 
 extern void s3c24xx_init_io(struct map_desc *mach_desc, int size);
+extern void s3c64xx_init_io(struct map_desc *mach_desc, int size);
 
 extern void s3c24xx_init_uarts(struct s3c2410_uartcfg *cfg, int no);
 

arch/arm/plat-s3c/include/plat/debug-macro.S

@@ -20,7 +20,7 @@
 	.endm
 
 #ifndef fifo_level
-#define fifo_level fifo_level_s3c2410
+#define fifo_level fifo_level_s3c2440
 #endif
 
 	.macro  fifo_full_s3c2440 rd, rx

arch/arm/plat-s3c24xx/include/plat/devs.h → arch/arm/plat-s3c/include/plat/devs.h

@@ -17,21 +17,26 @@ struct s3c24xx_uart_resources {
 };
 
 extern struct s3c24xx_uart_resources s3c2410_uart_resources[];
+extern struct s3c24xx_uart_resources s3c64xx_uart_resources[];
 
 extern struct platform_device *s3c24xx_uart_devs[];
 extern struct platform_device *s3c24xx_uart_src[];
 
 extern struct platform_device s3c_device_timer[];
 
+extern struct platform_device s3c_device_fb;
 extern struct platform_device s3c_device_usb;
 extern struct platform_device s3c_device_lcd;
 extern struct platform_device s3c_device_wdt;
-extern struct platform_device s3c_device_i2c;
+extern struct platform_device s3c_device_i2c0;
+extern struct platform_device s3c_device_i2c1;
 extern struct platform_device s3c_device_iis;
 extern struct platform_device s3c_device_rtc;
 extern struct platform_device s3c_device_adc;
 extern struct platform_device s3c_device_sdi;
-extern struct platform_device s3c_device_hsmmc;
+extern struct platform_device s3c_device_hsmmc0;
+extern struct platform_device s3c_device_hsmmc1;
+extern struct platform_device s3c_device_hsmmc2;
 
 extern struct platform_device s3c_device_spi0;
 extern struct platform_device s3c_device_spi1;

arch/arm/plat-s3c/include/plat/fb.h

@@ -0,0 +1,73 @@
+/* linux/arch/arm/plat-s3c/include/plat/fb.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C - FB platform data definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __PLAT_S3C_FB_H
+#define __PLAT_S3C_FB_H __FILE__
+
+/**
+ * struct s3c_fb_pd_win - per window setup data
+ * @win_mode: The display parameters to initialise (not for window 0)
+ * @virtual_x: The virtual X size.
+ * @virtual_y: The virtual Y size.
+ */
+struct s3c_fb_pd_win {
+	struct fb_videomode	win_mode;
+
+	unsigned short		default_bpp;
+	unsigned short		max_bpp;
+	unsigned short		virtual_x;
+	unsigned short		virtual_y;
+};
+
+/**
+ * struct s3c_fb_platdata -  S3C driver platform specific information
+ * @setup_gpio: Setup the external GPIO pins to the right state to transfer
+ *		the data from the display system to the connected display
+ *		device.
+ * @vidcon0: The base vidcon0 values to control the panel data format.
+ * @vidcon1: The base vidcon1 values to control the panel data output.
+ * @win: The setup data for each hardware window, or NULL for unused.
+ * @display_mode: The LCD output display mode.
+ *
+ * The platform data supplies the video driver with all the information
+ * it requires to work with the display(s) attached to the machine. It
+ * controls the initial mode, the number of display windows (0 is always
+ * the base framebuffer) that are initialised etc.
+ *
+ */
+struct s3c_fb_platdata {
+	void	(*setup_gpio)(void);
+
+	struct s3c_fb_pd_win	*win[S3C_FB_MAX_WIN];
+
+	u32			 vidcon0;
+	u32			 vidcon1;
+};
+
+/**
+ * s3c_fb_set_platdata() - Setup the FB device with platform data.
+ * @pd: The platform data to set. The data is copied from the passed structure
+ *      so the machine data can mark the data __initdata so that any unused
+ *      machines will end up dumping their data at runtime.
+ */
+extern void s3c_fb_set_platdata(struct s3c_fb_platdata *pd);
+
+/**
+ * s3c64xx_fb_gpio_setup_24bpp() - S3C64XX setup function for 24bpp LCD
+ *
+ * Initialise the GPIO for an 24bpp LCD display on the RGB interface.
+ */
+extern void s3c64xx_fb_gpio_setup_24bpp(void);
+
+#endif /* __PLAT_S3C_FB_H */

arch/arm/plat-s3c/include/plat/gpio-cfg-helpers.h

@@ -0,0 +1,176 @@
+/* linux/arch/arm/plat-s3c/include/plat/gpio-cfg-helper.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C Platform - GPIO pin configuration helper definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* This is meant for core cpu support, machine or other driver files
+ * should not be including this header.
+ */
+
+#ifndef __PLAT_GPIO_CFG_HELPERS_H
+#define __PLAT_GPIO_CFG_HELPERS_H __FILE__
+
+/* As a note, all gpio configuration functions are entered exclusively, either
+ * with the relevant lock held or the system prevented from doing anything else
+ * by disabling interrupts.
+*/
+
+static inline int s3c_gpio_do_setcfg(struct s3c_gpio_chip *chip,
+				     unsigned int off, unsigned int config)
+{
+	return (chip->config->set_config)(chip, off, config);
+}
+
+static inline int s3c_gpio_do_setpull(struct s3c_gpio_chip *chip,
+				      unsigned int off, s3c_gpio_pull_t pull)
+{
+	return (chip->config->set_pull)(chip, off, pull);
+}
+
+/**
+ * s3c_gpio_setcfg_s3c24xx - S3C24XX style GPIO configuration.
+ * @chip: The gpio chip that is being configured.
+ * @off: The offset for the GPIO being configured.
+ * @cfg: The configuration value to set.
+ *
+ * This helper deal with the GPIO cases where the control register
+ * has two bits of configuration per gpio, which have the following
+ * functions:
+ *	00 = input
+ *	01 = output
+ *	1x = special function
+*/
+extern int s3c_gpio_setcfg_s3c24xx(struct s3c_gpio_chip *chip,
+				   unsigned int off, unsigned int cfg);
+
+/**
+ * s3c_gpio_setcfg_s3c24xx_a - S3C24XX style GPIO configuration (Bank A)
+ * @chip: The gpio chip that is being configured.
+ * @off: The offset for the GPIO being configured.
+ * @cfg: The configuration value to set.
+ *
+ * This helper deal with the GPIO cases where the control register
+ * has one bit of configuration for the gpio, where setting the bit
+ * means the pin is in special function mode and unset means output.
+*/
+extern int s3c_gpio_setcfg_s3c24xx_a(struct s3c_gpio_chip *chip,
+				     unsigned int off, unsigned int cfg);
+
+/**
+ * s3c_gpio_setcfg_s3c64xx_4bit - S3C64XX 4bit single register GPIO config.
+ * @chip: The gpio chip that is being configured.
+ * @off: The offset for the GPIO being configured.
+ * @cfg: The configuration value to set.
+ *
+ * This helper deal with the GPIO cases where the control register has 4 bits
+ * of control per GPIO, generally in the form of:
+ *	0000 = Input
+ *	0001 = Output
+ *	others = Special functions (dependant on bank)
+ *
+ * Note, since the code to deal with the case where there are two control
+ * registers instead of one, we do not have a seperate set of functions for
+ * each case.
+*/
+extern int s3c_gpio_setcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip,
+					unsigned int off, unsigned int cfg);
+
+
+/* Pull-{up,down} resistor controls.
+ *
+ * S3C2410,S3C2440,S3C24A0 = Pull-UP,
+ * S3C2412,S3C2413 = Pull-Down
+ * S3C6400,S3C6410 = Pull-Both [None,Down,Up,Undef]
+ * S3C2443 = Pull-Both [not same as S3C6400]
+ */
+
+/**
+ * s3c_gpio_setpull_1up() - Pull configuration for choice of up or none.
+ * @chip: The gpio chip that is being configured.
+ * @off: The offset for the GPIO being configured.
+ * @param: pull: The pull mode being requested.
+ *
+ * This is a helper function for the case where we have GPIOs with one
+ * bit configuring the presence of a pull-up resistor.
+ */
+extern int s3c_gpio_setpull_1up(struct s3c_gpio_chip *chip,
+				unsigned int off, s3c_gpio_pull_t pull);
+
+/**
+ * s3c_gpio_setpull_1down() - Pull configuration for choice of down or none
+ * @chip: The gpio chip that is being configured
+ * @off: The offset for the GPIO being configured
+ * @param: pull: The pull mode being requested
+ *
+ * This is a helper function for the case where we have GPIOs with one
+ * bit configuring the presence of a pull-down resistor.
+ */
+extern int s3c_gpio_setpull_1down(struct s3c_gpio_chip *chip,
+				  unsigned int off, s3c_gpio_pull_t pull);
+
+/**
+ * s3c_gpio_setpull_upown() - Pull configuration for choice of up, down or none
+ * @chip: The gpio chip that is being configured.
+ * @off: The offset for the GPIO being configured.
+ * @param: pull: The pull mode being requested.
+ *
+ * This is a helper function for the case where we have GPIOs with two
+ * bits configuring the presence of a pull resistor, in the following
+ * order:
+ *	00 = No pull resistor connected
+ *	01 = Pull-up resistor connected
+ *	10 = Pull-down resistor connected
+ */
+extern int s3c_gpio_setpull_updown(struct s3c_gpio_chip *chip,
+				   unsigned int off, s3c_gpio_pull_t pull);
+
+
+/**
+ * s3c_gpio_getpull_updown() - Get configuration for choice of up, down or none
+ * @chip: The gpio chip that the GPIO pin belongs to
+ * @off: The offset to the pin to get the configuration of.
+ *
+ * This helper function reads the state of the pull-{up,down} resistor for the
+ * given GPIO in the same case as s3c_gpio_setpull_upown.
+*/
+extern s3c_gpio_pull_t s3c_gpio_getpull_updown(struct s3c_gpio_chip *chip,
+					       unsigned int off);
+
+/**
+ * s3c_gpio_setpull_s3c2443() - Pull configuration for s3c2443.
+ * @chip: The gpio chip that is being configured.
+ * @off: The offset for the GPIO being configured.
+ * @param: pull: The pull mode being requested.
+ *
+ * This is a helper function for the case where we have GPIOs with two
+ * bits configuring the presence of a pull resistor, in the following
+ * order:
+ *	00 = Pull-up resistor connected
+ *	10 = Pull-down resistor connected
+ *	x1 = No pull up resistor
+ */
+extern int s3c_gpio_setpull_s3c2443(struct s3c_gpio_chip *chip,
+				    unsigned int off, s3c_gpio_pull_t pull);
+
+/**
+ * s3c_gpio_getpull_s3c2443() - Get configuration for s3c2443 pull resistors
+ * @chip: The gpio chip that the GPIO pin belongs to.
+ * @off: The offset to the pin to get the configuration of.
+ *
+ * This helper function reads the state of the pull-{up,down} resistor for the
+ * given GPIO in the same case as s3c_gpio_setpull_upown.
+*/
+extern s3c_gpio_pull_t s3c_gpio_getpull_s3c24xx(struct s3c_gpio_chip *chip,
+						unsigned int off);
+
+#endif /* __PLAT_GPIO_CFG_HELPERS_H */
+

arch/arm/plat-s3c/include/plat/gpio-cfg.h

@@ -0,0 +1,110 @@
+/* linux/arch/arm/plat-s3c/include/plat/gpio-cfg.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C Platform - GPIO pin configuration
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* This file contains the necessary definitions to get the basic gpio
+ * pin configuration done such as setting a pin to input or output or
+ * changing the pull-{up,down} configurations.
+ */
+
+/* Note, this interface is being added to the s3c64xx arch first and will
+ * be added to the s3c24xx systems later.
+ */
+
+#ifndef __PLAT_GPIO_CFG_H
+#define __PLAT_GPIO_CFG_H __FILE__
+
+typedef unsigned int __bitwise__ s3c_gpio_pull_t;
+
+/* forward declaration if gpio-core.h hasn't been included */
+struct s3c_gpio_chip;
+
+/**
+ * struct s3c_gpio_cfg GPIO configuration
+ * @cfg_eint: Configuration setting when used for external interrupt source
+ * @get_pull: Read the current pull configuration for the GPIO
+ * @set_pull: Set the current pull configuraiton for the GPIO
+ * @set_config: Set the current configuration for the GPIO
+ * @get_config: Read the current configuration for the GPIO
+ *
+ * Each chip can have more than one type of GPIO bank available and some
+ * have different capabilites even when they have the same control register
+ * layouts. Provide an point to vector control routine and provide any
+ * per-bank configuration information that other systems such as the
+ * external interrupt code will need.
+ */
+struct s3c_gpio_cfg {
+	unsigned int	cfg_eint;
+
+	s3c_gpio_pull_t	(*get_pull)(struct s3c_gpio_chip *chip, unsigned offs);
+	int		(*set_pull)(struct s3c_gpio_chip *chip, unsigned offs,
+				    s3c_gpio_pull_t pull);
+
+	unsigned (*get_config)(struct s3c_gpio_chip *chip, unsigned offs);
+	int	 (*set_config)(struct s3c_gpio_chip *chip, unsigned offs,
+			       unsigned config);
+};
+
+#define S3C_GPIO_SPECIAL_MARK	(0xfffffff0)
+#define S3C_GPIO_SPECIAL(x)	(S3C_GPIO_SPECIAL_MARK | (x))
+
+/* Defines for generic pin configurations */
+#define S3C_GPIO_INPUT	(S3C_GPIO_SPECIAL(0))
+#define S3C_GPIO_OUTPUT	(S3C_GPIO_SPECIAL(1))
+#define S3C_GPIO_SFN(x)	(S3C_GPIO_SPECIAL(x))
+
+#define s3c_gpio_is_cfg_special(_cfg) \
+	(((_cfg) & S3C_GPIO_SPECIAL_MARK) == S3C_GPIO_SPECIAL_MARK)
+
+/**
+ * s3c_gpio_cfgpin() - Change the GPIO function of a pin.
+ * @pin pin The pin number to configure.
+ * @pin to The configuration for the pin's function.
+ *
+ * Configure which function is actually connected to the external
+ * pin, such as an gpio input, output or some form of special function
+ * connected to an internal peripheral block.
+ */
+extern int s3c_gpio_cfgpin(unsigned int pin, unsigned int to);
+
+/* Define values for the pull-{up,down} available for each gpio pin.
+ *
+ * These values control the state of the weak pull-{up,down} resistors
+ * available on most pins on the S3C series. Not all chips support both
+ * up or down settings, and it may be dependant on the chip that is being
+ * used to whether the particular mode is available.
+ */
+#define S3C_GPIO_PULL_NONE	((__force s3c_gpio_pull_t)0x00)
+#define S3C_GPIO_PULL_DOWN	((__force s3c_gpio_pull_t)0x01)
+#define S3C_GPIO_PULL_UP	((__force s3c_gpio_pull_t)0x02)
+
+/**
+ * s3c_gpio_setpull() - set the state of a gpio pin pull resistor
+ * @pin: The pin number to configure the pull resistor.
+ * @pull: The configuration for the pull resistor.
+ *
+ * This function sets the state of the pull-{up,down} resistor for the
+ * specified pin. It will return 0 if successfull, or a negative error
+ * code if the pin cannot support the requested pull setting.
+*/
+extern int s3c_gpio_setpull(unsigned int pin, s3c_gpio_pull_t pull);
+
+/**
+ * s3c_gpio_getpull() - get the pull resistor state of a gpio pin
+ * @pin: The pin number to get the settings for
+ *
+ * Read the pull resistor value for the specified pin.
+*/
+extern s3c_gpio_pull_t s3c_gpio_getpull(unsigned int pin);
+
+#endif /* __PLAT_GPIO_CFG_H */

arch/arm/plat-s3c/include/plat/gpio-core.h

@@ -0,0 +1,77 @@
+/* linux/arch/arm/plat-s3c/include/plat/gpio-core.h
+ *
+ * Copyright 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C Platform - GPIO core
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* Define the core gpiolib support functions that the s3c platforms may
+ * need to extend or change depending on the hardware and the s3c chip
+ * selected at build or found at run time.
+ *
+ * These definitions are not intended for driver inclusion, there is
+ * nothing here that should not live outside the platform and core
+ * specific code.
+*/
+
+struct s3c_gpio_cfg;
+
+/**
+ * struct s3c_gpio_chip - wrapper for specific implementation of gpio
+ * @chip: The chip structure to be exported via gpiolib.
+ * @base: The base pointer to the gpio configuration registers.
+ * @config: special function and pull-resistor control information.
+ *
+ * This wrapper provides the necessary information for the Samsung
+ * specific gpios being registered with gpiolib.
+ */
+struct s3c_gpio_chip {
+	struct gpio_chip	chip;
+	struct s3c_gpio_cfg	*config;
+	void __iomem		*base;
+};
+
+static inline struct s3c_gpio_chip *to_s3c_gpio(struct gpio_chip *gpc)
+{
+	return container_of(gpc, struct s3c_gpio_chip, chip);
+}
+
+/** s3c_gpiolib_add() - add the s3c specific version of a gpio_chip.
+ * @chip: The chip to register
+ *
+ * This is a wrapper to gpiochip_add() that takes our specific gpio chip
+ * information and makes the necessary alterations for the platform and
+ * notes the information for use with the configuration systems and any
+ * other parts of the system.
+ */
+extern void s3c_gpiolib_add(struct s3c_gpio_chip *chip);
+
+/* CONFIG_S3C_GPIO_TRACK enables the tracking of the s3c specific gpios
+ * for use with the configuration calls, and other parts of the s3c gpiolib
+ * support code.
+ *
+ * Not all s3c support code will need this, as some configurations of cpu
+ * may only support one or two different configuration options and have an
+ * easy gpio to s3c_gpio_chip mapping function. If this is the case, then
+ * the machine support file should provide its own s3c_gpiolib_getchip()
+ * and any other necessary functions.
+ */
+
+#ifdef CONFIG_S3C_GPIO_TRACK
+extern struct s3c_gpio_chip *s3c_gpios[S3C_GPIO_END];
+
+static inline struct s3c_gpio_chip *s3c_gpiolib_getchip(unsigned int chip)
+{
+	return (chip < S3C_GPIO_END) ? s3c_gpios[chip] : NULL;
+}
+#else
+/* machine specific code should provide s3c_gpiolib_getchip */
+
+static inline void s3c_gpiolib_track(struct s3c_gpio_chip *chip) { }
+#endif

arch/arm/plat-s3c/include/plat/iic-core.h

@@ -0,0 +1,35 @@
+/* arch/arm/mach-s3c2410/include/mach/iic-core.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C - I2C Controller core functions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_IIC_CORE_H
+#define __ASM_ARCH_IIC_CORE_H __FILE__
+
+/* These functions are only for use with the core support code, such as
+ * the cpu specific initialisation code
+ */
+
+/* re-define device name depending on support. */
+static inline void s3c_i2c0_setname(char *name)
+{
+	/* currently this device is always compiled in */
+	s3c_device_i2c0.name = name;
+}
+
+static inline void s3c_i2c1_setname(char *name)
+{
+#ifdef CONFIG_S3C_DEV_I2C1
+	s3c_device_i2c1.name = name;
+#endif
+}
+
+#endif /* __ASM_ARCH_IIC_H */

arch/arm/plat-s3c/include/plat/iic.h

@@ -28,6 +28,30 @@ struct s3c2410_platform_i2c {
 	unsigned long	max_freq;	/* max frequency for the bus */
 	unsigned long	min_freq;	/* min frequency for the bus */
 	unsigned int	sda_delay;	/* pclks (s3c2440 only) */
+
+	void	(*cfg_gpio)(struct platform_device *dev);
 };
 
+/**
+ * s3c_i2c0_set_platdata - set platform data for i2c0 device
+ * @i2c: The platform data to set, or NULL for default data.
+ *
+ * Register the given platform data for use with the i2c0 device. This
+ * call copies the platform data, so the caller can use __initdata for
+ * their copy.
+ *
+ * This call will set cfg_gpio if is null to the default platform
+ * implementation.
+ *
+ * Any user of s3c_device_i2c0 should call this, even if it is with
+ * NULL to ensure that the device is given the default platform data
+ * as the driver will no longer carry defaults.
+ */
+extern void s3c_i2c0_set_platdata(struct s3c2410_platform_i2c *i2c);
+extern void s3c_i2c1_set_platdata(struct s3c2410_platform_i2c *i2c);
+
+/* defined by architecture to configure gpio */
+extern void s3c_i2c0_cfg_gpio(struct platform_device *dev);
+extern void s3c_i2c1_cfg_gpio(struct platform_device *dev);
+
 #endif /* __ASM_ARCH_IIC_H */