Merge tag 'imx-dt-3.8' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/dt

From Shawn Guo <shawn.guo@linaro.org>:
It's based on imx/multiplatform branch.  Most of them are dts changes.
There are also a few imx6 improvement patches in there.

* tag 'imx-dt-3.8' of git://git.linaro.org/people/shawnguo/linux-2.6:
  ARM: imx6q: select ARM and PL310 errata
  ARM: imx6q: print silicon version on boot
  ARM i.MX dts: Consistently add labels to devicenodes
  ARM: dts: imx6q-sabresd: add volume up/down gpio keys
  ARM: dts: imx53: pinctl update
  ARM: imx: enable cpufreq for imx6q
  ARM: dts: imx6q: enable snvs lp rtc
  ARM: dts: imx6q-sabreauto: Add basic support
  ARM: imx6q: let users input debug uart port number
  ARM: dts: imx53-qsb: Make DA9053 regulator functional
  ARM: dts: imx53-qsb: Use pinctrl for gpio-led
  ARM i.MX dtsi: Add default bus-width property for esdhc controller

Signed-off-by: Arnd Bregmann <arnd@arndb.de>

Documentation/devicetree/bindings/arm/fsl.txt

@@ -41,6 +41,10 @@ i.MX6 Quad SABRE Smart Device Board
 Required root node properties:
     - compatible = "fsl,imx6q-sabresd", "fsl,imx6q";
 
+i.MX6 Quad SABRE Automotive Board
+Required root node properties:
+    - compatible = "fsl,imx6q-sabreauto", "fsl,imx6q";
+
 Generic i.MX boards
 -------------------
 

arch/arm/Kconfig.debug

@@ -226,20 +226,12 @@ choice
 		  Say Y here if you want kernel low-level debugging support
 		  on i.MX50 or i.MX53.
 
-	config DEBUG_IMX6Q_UART2
-		bool "i.MX6Q Debug UART2"
+	config DEBUG_IMX6Q_UART
+		bool "i.MX6Q Debug UART"
 		depends on SOC_IMX6Q
 		help
 		  Say Y here if you want kernel low-level debugging support
-		  on i.MX6Q UART2. This is correct for e.g. the SabreLite
-                  board.
-
-	config DEBUG_IMX6Q_UART4
-		bool "i.MX6Q Debug UART4"
-		depends on SOC_IMX6Q
-		help
-		  Say Y here if you want kernel low-level debugging support
-		  on i.MX6Q UART4.
+		  on i.MX6Q.
 
 	config DEBUG_MMP_UART2
 		bool "Kernel low-level debugging message via MMP UART2"
@@ -426,6 +418,15 @@ choice
 
 endchoice
 
+config DEBUG_IMX6Q_UART_PORT
+	int "i.MX6Q Debug UART Port (1-5)" if DEBUG_IMX6Q_UART
+	range 1 5
+	default 1
+	depends on SOC_IMX6Q
+	help
+	  Choose UART port on which kernel low-level debug messages
+	  should be output.
+
 config DEBUG_LL_INCLUDE
 	string
 	default "debug/icedcc.S" if DEBUG_ICEDCC
@@ -435,8 +436,7 @@ config DEBUG_LL_INCLUDE
 				 DEBUG_IMX31_IMX35_UART || \
 				 DEBUG_IMX51_UART || \
 				 DEBUG_IMX50_IMX53_UART ||\
-				 DEBUG_IMX6Q_UART2 || \
-				 DEBUG_IMX6Q_UART4
+				 DEBUG_IMX6Q_UART
 	default "debug/highbank.S" if DEBUG_HIGHBANK_UART
 	default "debug/mvebu.S" if DEBUG_MVEBU_UART
 	default "debug/picoxcell.S" if DEBUG_PICOXCELL_UART

arch/arm/boot/dts/Makefile

@@ -51,6 +51,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx51-babbage.dtb \
 	imx53-qsb.dtb \
 	imx53-smd.dtb \
 	imx6q-arm2.dtb \
+	imx6q-sabreauto.dtb \
 	imx6q-sabrelite.dtb \
 	imx6q-sabresd.dtb
 dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \

arch/arm/boot/dts/imx27.dtsi

@@ -58,7 +58,7 @@
 			reg = <0x10000000 0x10000000>;
 			ranges;
 
-			wdog@10002000 {
+			wdog: wdog@10002000 {
 				compatible = "fsl,imx27-wdt", "fsl,imx21-wdt";
 				reg = <0x10002000 0x4000>;
 				interrupts = <27>;
@@ -218,7 +218,8 @@
 				status = "disabled";
 			};
 		};
-		nand@d8000000 {
+
+		nfc: nand@d8000000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
 

arch/arm/boot/dts/imx51.dtsi

@@ -76,17 +76,18 @@
 				reg = <0x70000000 0x40000>;
 				ranges;
 
-				esdhc@70004000 { /* ESDHC1 */
+				esdhc1: esdhc@70004000 {
 					compatible = "fsl,imx51-esdhc";
 					reg = <0x70004000 0x4000>;
 					interrupts = <1>;
 					status = "disabled";
 				};
 
-				esdhc@70008000 { /* ESDHC2 */
+				esdhc2: esdhc@70008000 {
 					compatible = "fsl,imx51-esdhc";
 					reg = <0x70008000 0x4000>;
 					interrupts = <2>;
+					bus-width = <4>;
 					status = "disabled";
 				};
 
@@ -97,7 +98,7 @@
 					status = "disabled";
 				};
 
-				ecspi@70010000 { /* ECSPI1 */
+				ecspi1: ecspi@70010000 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					compatible = "fsl,imx51-ecspi";
@@ -115,43 +116,45 @@
 					status = "disabled";
 				};
 
-				esdhc@70020000 { /* ESDHC3 */
+				esdhc3: esdhc@70020000 {
 					compatible = "fsl,imx51-esdhc";
 					reg = <0x70020000 0x4000>;
 					interrupts = <3>;
+					bus-width = <4>;
 					status = "disabled";
 				};
 
-				esdhc@70024000 { /* ESDHC4 */
+				esdhc4: esdhc@70024000 {
 					compatible = "fsl,imx51-esdhc";
 					reg = <0x70024000 0x4000>;
 					interrupts = <4>;
+					bus-width = <4>;
 					status = "disabled";
 				};
 			};
 
-			usb@73f80000 {
+			usbotg: usb@73f80000 {
 				compatible = "fsl,imx51-usb", "fsl,imx27-usb";
 				reg = <0x73f80000 0x0200>;
 				interrupts = <18>;
 				status = "disabled";
 			};
 
-			usb@73f80200 {
+			usbh1: usb@73f80200 {
 				compatible = "fsl,imx51-usb", "fsl,imx27-usb";
 				reg = <0x73f80200 0x0200>;
 				interrupts = <14>;
 				status = "disabled";
 			};
 
-			usb@73f80400 {
+			usbh2: usb@73f80400 {
 				compatible = "fsl,imx51-usb", "fsl,imx27-usb";
 				reg = <0x73f80400 0x0200>;
 				interrupts = <16>;
 				status = "disabled";
 			};
 
-			usb@73f80600 {
+			usbh3: usb@73f80600 {
 				compatible = "fsl,imx51-usb", "fsl,imx27-usb";
 				reg = <0x73f80600 0x0200>;
 				interrupts = <17>;
@@ -198,20 +201,20 @@
 				#interrupt-cells = <2>;
 			};
 
-			wdog@73f98000 { /* WDOG1 */
+			wdog1: wdog@73f98000 {
 				compatible = "fsl,imx51-wdt", "fsl,imx21-wdt";
 				reg = <0x73f98000 0x4000>;
 				interrupts = <58>;
 			};
 
-			wdog@73f9c000 { /* WDOG2 */
+			wdog2: wdog@73f9c000 {
 				compatible = "fsl,imx51-wdt", "fsl,imx21-wdt";
 				reg = <0x73f9c000 0x4000>;
 				interrupts = <59>;
 				status = "disabled";
 			};
 
-			iomuxc@73fa8000 {
+			iomuxc: iomuxc@73fa8000 {
 				compatible = "fsl,imx51-iomuxc";
 				reg = <0x73fa8000 0x4000>;
 
@@ -349,7 +352,7 @@
 			reg = <0x80000000 0x10000000>;
 			ranges;
 
-			ecspi@83fac000 { /* ECSPI2 */
+			ecspi2: ecspi@83fac000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx51-ecspi";
@@ -358,14 +361,14 @@
 				status = "disabled";
 			};
 
-			sdma@83fb0000 {
+			sdma: sdma@83fb0000 {
 				compatible = "fsl,imx51-sdma", "fsl,imx35-sdma";
 				reg = <0x83fb0000 0x4000>;
 				interrupts = <6>;
 				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx51.bin";
 			};
 
-			cspi@83fc0000 {
+			cspi: cspi@83fc0000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx51-cspi", "fsl,imx35-cspi";
@@ -374,7 +377,7 @@
 				status = "disabled";
 			};
 
-			i2c@83fc4000 { /* I2C2 */
+			i2c2: i2c@83fc4000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx51-i2c", "fsl,imx21-i2c";
@@ -383,7 +386,7 @@
 				status = "disabled";
 			};
 
-			i2c@83fc8000 { /* I2C1 */
+			i2c1: i2c@83fc8000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx51-i2c", "fsl,imx21-i2c";
@@ -401,13 +404,13 @@
 				status = "disabled";
 			};
 
-			audmux@83fd0000 {
+			audmux: audmux@83fd0000 {
 				compatible = "fsl,imx51-audmux", "fsl,imx31-audmux";
 				reg = <0x83fd0000 0x4000>;
 				status = "disabled";
 			};
 
-			nand@83fdb000 {
+			nfc: nand@83fdb000 {
 				compatible = "fsl,imx51-nand";
 				reg = <0x83fdb000 0x1000 0xcfff0000 0x10000>;
 				interrupts = <8>;
@@ -423,7 +426,7 @@
 				status = "disabled";
 			};
 
-			ethernet@83fec000 {
+			fec: ethernet@83fec000 {
 				compatible = "fsl,imx51-fec", "fsl,imx27-fec";
 				reg = <0x83fec000 0x4000>;
 				interrupts = <87>;

arch/arm/boot/dts/imx53-qsb.dts

@@ -60,10 +60,17 @@
 							697  0x80000000	/* MX53_PAD_EIM_DA12__GPIO3_12 */
 							701  0x80000000	/* MX53_PAD_EIM_DA13__GPIO3_13 */
 							868  0x80000000	/* MX53_PAD_PATA_DA_0__GPIO7_6 */
+							1149 0x80000000 /* MX53_PAD_GPIO_16__GPIO7_11 */
+						>;
+					};
+
+					led_pin_gpio7_7: led_gpio7_7@0 {
+						fsl,pins = <
 							873  0x80000000	/* MX53_PAD_PATA_DA_1__GPIO7_7 */
 						>;
 					};
 				};
+
 			};
 
 			uart1: serial@53fbc000 {
@@ -100,76 +107,93 @@
 				pmic: dialog@48 {
 					compatible = "dlg,da9053-aa", "dlg,da9052";
 					reg = <0x48>;
+					interrupt-parent = <&gpio7>;
+					interrupts = <11 0x8>; /* low-level active IRQ at GPIO7_11 */
 
 					regulators {
-						buck0 {
+						buck1_reg: buck1 {
 							regulator-min-microvolt = <500000>;
 							regulator-max-microvolt = <2075000>;
+							regulator-always-on;
 						};
 
-						buck1 {
+						buck2_reg: buck2 {
 							regulator-min-microvolt = <500000>;
 							regulator-max-microvolt = <2075000>;
+							regulator-always-on;
 						};
 
-						buck2 {
+						buck3_reg: buck3 {
 							regulator-min-microvolt = <925000>;
 					                regulator-max-microvolt = <2500000>;
+							regulator-always-on;
 						};
 
-						buck3 {
+						buck4_reg: buck4 {
 							regulator-min-microvolt = <925000>;
 					                regulator-max-microvolt = <2500000>;
+							regulator-always-on;
 						};
 
-						ldo4 {
+						ldo1_reg: ldo1 {
 							regulator-min-microvolt = <600000>;
 							regulator-max-microvolt = <1800000>;
+							regulator-boot-on;
+							regulator-always-on;
 						};
 
-						ldo5 {
+						ldo2_reg: ldo2 {
+							regulator-min-microvolt = <600000>;
+							regulator-max-microvolt = <1800000>;
+							regulator-always-on;
+						};
+
+						ldo3_reg: ldo3 {
 							regulator-min-microvolt = <600000>;
 					                regulator-max-microvolt = <1800000>;
+							regulator-always-on;
 						};
 
-						ldo6 {
+						ldo4_reg: ldo4 {
 							regulator-min-microvolt = <1725000>;
 					                regulator-max-microvolt = <3300000>;
+							regulator-always-on;
 						};
 
-						ldo7 {
+						ldo5_reg: ldo5 {
 							regulator-min-microvolt = <1725000>;
 					                regulator-max-microvolt = <3300000>;
+							regulator-always-on;
 						};
 
-						ldo8 {
+						ldo6_reg: ldo6 {
 							regulator-min-microvolt = <1200000>;
 					                regulator-max-microvolt = <3600000>;
+							regulator-always-on;
 						};
 
-						ldo9 {
+						ldo7_reg: ldo7 {
 							regulator-min-microvolt = <1200000>;
 					                regulator-max-microvolt = <3600000>;
+							regulator-always-on;
 						};
 
-						ldo10 {
+						ldo8_reg: ldo8 {
 							regulator-min-microvolt = <1200000>;
 					                regulator-max-microvolt = <3600000>;
+							regulator-always-on;
 						};
 
-						ldo11 {
+						ldo9_reg: ldo9 {
 							regulator-min-microvolt = <1200000>;
 					                regulator-max-microvolt = <3600000>;
+							regulator-always-on;
 						};
 
-						ldo12 {
+						ldo10_reg: ldo10 {
 							regulator-min-microvolt = <1250000>;
 					                regulator-max-microvolt = <3650000>;
-						};
-
-						ldo13 {
-							regulator-min-microvolt = <1200000>;
-					                regulator-max-microvolt = <3600000>;
+							regulator-always-on;
 						};
 					};
 				};
@@ -216,6 +240,8 @@
 
 	leds {
 		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pin_gpio7_7>;
 
 		user {
 			label = "Heartbeat";

arch/arm/boot/dts/imx53.dtsi

@@ -81,17 +81,19 @@
 				reg = <0x50000000 0x40000>;
 				ranges;
 
-				esdhc@50004000 { /* ESDHC1 */
+				esdhc1: esdhc@50004000 {
 					compatible = "fsl,imx53-esdhc";
 					reg = <0x50004000 0x4000>;
 					interrupts = <1>;
+					bus-width = <4>;
 					status = "disabled";
 				};
 
-				esdhc@50008000 { /* ESDHC2 */
+				esdhc2: esdhc@50008000 {
 					compatible = "fsl,imx53-esdhc";
 					reg = <0x50008000 0x4000>;
 					interrupts = <2>;
+					bus-width = <4>;
 					status = "disabled";
 				};
 
@@ -102,7 +104,7 @@
 					status = "disabled";
 				};
 
-				ecspi@50010000 { /* ECSPI1 */
+				ecspi1: ecspi@50010000 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi";
@@ -120,43 +122,45 @@
 					status = "disabled";
 				};
 
-				esdhc@50020000 { /* ESDHC3 */
+				esdhc3: esdhc@50020000 {
 					compatible = "fsl,imx53-esdhc";
 					reg = <0x50020000 0x4000>;
 					interrupts = <3>;
+					bus-width = <4>;
 					status = "disabled";
 				};
 
-				esdhc@50024000 { /* ESDHC4 */
+				esdhc4: esdhc@50024000 {
 					compatible = "fsl,imx53-esdhc";
 					reg = <0x50024000 0x4000>;
 					interrupts = <4>;
+					bus-width = <4>;
 					status = "disabled";
 				};
 			};
 
-			usb@53f80000 {
+			usbotg: usb@53f80000 {
 				compatible = "fsl,imx53-usb", "fsl,imx27-usb";
 				reg = <0x53f80000 0x0200>;
 				interrupts = <18>;
 				status = "disabled";
 			};
 
-			usb@53f80200 {
+			usbh1: usb@53f80200 {
 				compatible = "fsl,imx53-usb", "fsl,imx27-usb";
 				reg = <0x53f80200 0x0200>;
 				interrupts = <14>;
 				status = "disabled";
 			};
 
-			usb@53f80400 {
+			usbh2: usb@53f80400 {
 				compatible = "fsl,imx53-usb", "fsl,imx27-usb";
 				reg = <0x53f80400 0x0200>;
 				interrupts = <16>;
 				status = "disabled";
 			};
 
-			usb@53f80600 {
+			usbh3: usb@53f80600 {
 				compatible = "fsl,imx53-usb", "fsl,imx27-usb";
 				reg = <0x53f80600 0x0200>;
 				interrupts = <17>;
@@ -203,20 +207,20 @@
 				#interrupt-cells = <2>;
 			};
 
-			wdog@53f98000 { /* WDOG1 */
+			wdog1: wdog@53f98000 {
 				compatible = "fsl,imx53-wdt", "fsl,imx21-wdt";
 				reg = <0x53f98000 0x4000>;
 				interrupts = <58>;
 			};
 
-			wdog@53f9c000 { /* WDOG2 */
+			wdog2: wdog@53f9c000 {
 				compatible = "fsl,imx53-wdt", "fsl,imx21-wdt";
 				reg = <0x53f9c000 0x4000>;
 				interrupts = <59>;
 				status = "disabled";
 			};
 
-			iomuxc@53fa8000 {
+			iomuxc: iomuxc@53fa8000 {
 				compatible = "fsl,imx53-iomuxc";
 				reg = <0x53fa8000 0x4000>;
 
@@ -316,6 +320,24 @@
 					};
 				};
 
+				can1 {
+					pinctrl_can1_1: can1grp-1 {
+						fsl,pins = <
+							847 0x80000000  /* MX53_PAD_PATA_INTRQ__CAN1_TXCAN */
+							853 0x80000000  /* MX53_PAD_PATA_DIOR__CAN1_RXCAN */
+						>;
+					};
+				};
+
+				can2 {
+					pinctrl_can2_1: can2grp-1 {
+						fsl,pins = <
+							67  0x80000000  /* MX53_PAD_KEY_COL4__CAN2_TXCAN */
+							74  0x80000000  /* MX53_PAD_KEY_ROW4__CAN2_RXCAN */
+						>;
+					};
+				};
+
 				i2c1 {
 					pinctrl_i2c1_1: i2c1grp-1 {
 						fsl,pins = <
@@ -334,6 +356,15 @@
 					};
 				};
 
+				i2c3 {
+					pinctrl_i2c3_1: i2c3grp-1 {
+						fsl,pins = <
+							1102 0xc0000000	/* MX53_PAD_GPIO_6__I2C3_SDA */
+							1130 0xc0000000	/* MX53_PAD_GPIO_5__I2C3_SCL */
+						>;
+					};
+				};
+
 				uart1 {
 					pinctrl_uart1_1: uart1grp-1 {
 						fsl,pins = <
@@ -369,6 +400,25 @@
 						>;
 					};
 				};
+
+				uart4 {
+					pinctrl_uart4_1: uart4grp-1 {
+						fsl,pins = <
+							11 0x1c5	/* MX53_PAD_KEY_COL0__UART4_TXD_MUX */
+							18 0x1c5	/* MX53_PAD_KEY_ROW0__UART4_RXD_MUX */
+						>;
+					};
+				};
+
+				uart5 {
+					pinctrl_uart5_1: uart5grp-1 {
+						fsl,pins = <
+							24 0x1c5	/* MX53_PAD_KEY_COL1__UART5_TXD_MUX */
+							31 0x1c5	/* MX53_PAD_KEY_ROW1__UART5_RXD_MUX */
+						>;
+					};
+				};
+
 			};
 
 			uart1: serial@53fbc000 {
@@ -429,7 +479,7 @@
 				#interrupt-cells = <2>;
 			};
 
-			i2c@53fec000 { /* I2C3 */
+			i2c3: i2c@53fec000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx53-i2c", "fsl,imx21-i2c";
@@ -460,7 +510,7 @@
 				status = "disabled";
 			};
 
-			ecspi@63fac000 { /* ECSPI2 */
+			ecspi2: ecspi@63fac000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi";
@@ -469,14 +519,14 @@
 				status = "disabled";
 			};
 
-			sdma@63fb0000 {
+			sdma: sdma@63fb0000 {
 				compatible = "fsl,imx53-sdma", "fsl,imx35-sdma";
 				reg = <0x63fb0000 0x4000>;
 				interrupts = <6>;
 				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin";
 			};
 
-			cspi@63fc0000 {
+			cspi: cspi@63fc0000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx53-cspi", "fsl,imx35-cspi";
@@ -485,7 +535,7 @@
 				status = "disabled";
 			};
 
-			i2c@63fc4000 { /* I2C2 */
+			i2c2: i2c@63fc4000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx53-i2c", "fsl,imx21-i2c";
@@ -494,7 +544,7 @@
 				status = "disabled";
 			};
 
-			i2c@63fc8000 { /* I2C1 */
+			i2c1: i2c@63fc8000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx53-i2c", "fsl,imx21-i2c";
@@ -512,13 +562,13 @@
 				status = "disabled";
 			};
 
-			audmux@63fd0000 {
+			audmux: audmux@63fd0000 {
 				compatible = "fsl,imx53-audmux", "fsl,imx31-audmux";
 				reg = <0x63fd0000 0x4000>;
 				status = "disabled";
 			};
 
-			nand@63fdb000 {
+			nfc: nand@63fdb000 {
 				compatible = "fsl,imx53-nand";
 				reg = <0x63fdb000 0x1000 0xf7ff0000 0x10000>;
 				interrupts = <8>;
@@ -534,7 +584,7 @@
 				status = "disabled";
 			};
 
-			ethernet@63fec000 {
+			fec: ethernet@63fec000 {
 				compatible = "fsl,imx53-fec", "fsl,imx25-fec";
 				reg = <0x63fec000 0x4000>;
 				interrupts = <87>;

arch/arm/boot/dts/imx6q-sabreauto.dts

@@ -0,0 +1,64 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "imx6q.dtsi"
+
+/ {
+	model = "Freescale i.MX6 Quad SABRE Automotive Board";
+	compatible = "fsl,imx6q-sabreauto", "fsl,imx6q";
+
+	memory {
+		reg = <0x10000000 0x80000000>;
+	};
+
+	soc {
+		aips-bus@02000000 { /* AIPS1 */
+			iomuxc@020e0000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_hog>;
+
+				hog {
+					pinctrl_hog: hoggrp {
+						fsl,pins = <
+							1376 0x80000000	/* MX6Q_PAD_NANDF_CS2__GPIO_6_15 */
+							13   0x80000000	/* MX6Q_PAD_SD2_DAT2__GPIO_1_13 */
+						>;
+					};
+				};
+			};
+		};
+
+		aips-bus@02100000 { /* AIPS2 */
+			uart4: serial@021f0000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart4_1>;
+				status = "okay";
+			};
+
+			ethernet@02188000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_enet_2>;
+				phy-mode = "rgmii";
+				status = "okay";
+			};
+
+			usdhc@02198000 { /* uSDHC3 */
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usdhc3_1>;
+				cd-gpios = <&gpio6 15 0>;
+				wp-gpios = <&gpio1 13 0>;
+				status = "okay";
+			};
+		};
+	};
+};

arch/arm/boot/dts/imx6q-sabresd.dts

@@ -38,6 +38,8 @@
 				hog {
 					pinctrl_hog: hoggrp {
 						fsl,pins = <
+							1004 0x80000000 /* MX6Q_PAD_GPIO_4__GPIO_1_4 */
+							1012 0x80000000 /* MX6Q_PAD_GPIO_5__GPIO_1_5 */
 							1402 0x80000000	/* MX6Q_PAD_NANDF_D0__GPIO_2_0 */
 							1410 0x80000000	/* MX6Q_PAD_NANDF_D1__GPIO_2_1 */
 							1418 0x80000000	/* MX6Q_PAD_NANDF_D2__GPIO_2_2 */
@@ -73,4 +75,20 @@
 			};
 		};
 	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		volume-up {
+			label = "Volume Up";
+			gpios = <&gpio1 4 0>;
+			linux,code = <115>; /* KEY_VOLUMEUP */
+		};
+
+		volume-down {
+			label = "Volume Down";
+			gpios = <&gpio1 5 0>;
+			linux,code = <114>; /* KEY_VOLUMEDOWN */
+		};
+	};
 };

arch/arm/boot/dts/imx6q.dtsi

@@ -36,6 +36,14 @@
 			compatible = "arm,cortex-a9";
 			reg = <0>;
 			next-level-cache = <&L2>;
+			operating-points = <
+				/* kHz    uV */
+				792000  1100000
+				396000  950000
+				198000  850000
+			>;
+			clock-latency = <61036>; /* two CLK32 periods */
+			cpu0-supply = <&reg_cpu>;
 		};
 
 		cpu@1 {
@@ -100,7 +108,7 @@
 			clocks = <&clks 106>;
 		};
 
-		gpmi-nand@00112000 {
+		nfc: gpmi-nand@00112000 {
 			compatible = "fsl,imx6q-gpmi-nand";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -144,12 +152,12 @@
 				reg = <0x02000000 0x40000>;
 				ranges;
 
-				spdif@02004000 {
+				spdif: spdif@02004000 {
 					reg = <0x02004000 0x4000>;
 					interrupts = <0 52 0x04>;
 				};
 
-				ecspi@02008000 { /* eCSPI1 */
+				ecspi1: ecspi@02008000 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
@@ -160,7 +168,7 @@
 					status = "disabled";
 				};
 
-				ecspi@0200c000 { /* eCSPI2 */
+				ecspi2: ecspi@0200c000 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
@@ -171,7 +179,7 @@
 					status = "disabled";
 				};
 
-				ecspi@02010000 { /* eCSPI3 */
+				ecspi3: ecspi@02010000 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
@@ -182,7 +190,7 @@
 					status = "disabled";
 				};
 
-				ecspi@02014000 { /* eCSPI4 */
+				ecspi4: ecspi@02014000 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
@@ -193,7 +201,7 @@
 					status = "disabled";
 				};
 
-				ecspi@02018000 { /* eCSPI5 */
+				ecspi5: ecspi@02018000 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
@@ -213,7 +221,7 @@
 					status = "disabled";
 				};
 
-				esai@02024000 {
+				esai: esai@02024000 {
 					reg = <0x02024000 0x4000>;
 					interrupts = <0 51 0x04>;
 				};
@@ -248,7 +256,7 @@
 					status = "disabled";
 				};
 
-				asrc@02034000 {
+				asrc: asrc@02034000 {
 					reg = <0x02034000 0x4000>;
 					interrupts = <0 50 0x04>;
 				};
@@ -258,7 +266,7 @@
 				};
 			};
 
-			vpu@02040000 {
+			vpu: vpu@02040000 {
 				reg = <0x02040000 0x3c000>;
 				interrupts = <0 3 0x04 0 12 0x04>;
 			};
@@ -267,37 +275,37 @@
 				reg = <0x0207c000 0x4000>;
 			};
 
-			pwm@02080000 { /* PWM1 */
+			pwm1: pwm@02080000 {
 				reg = <0x02080000 0x4000>;
 				interrupts = <0 83 0x04>;
 			};
 
-			pwm@02084000 { /* PWM2 */
+			pwm2: pwm@02084000 {
 				reg = <0x02084000 0x4000>;
 				interrupts = <0 84 0x04>;
 			};
 
-			pwm@02088000 { /* PWM3 */
+			pwm3: pwm@02088000 {
 				reg = <0x02088000 0x4000>;
 				interrupts = <0 85 0x04>;
 			};
 
-			pwm@0208c000 { /* PWM4 */
+			pwm4: pwm@0208c000 {
 				reg = <0x0208c000 0x4000>;
 				interrupts = <0 86 0x04>;
 			};
 
-			flexcan@02090000 { /* CAN1 */
+			can1: flexcan@02090000 {
 				reg = <0x02090000 0x4000>;
 				interrupts = <0 110 0x04>;
 			};
 
-			flexcan@02094000 { /* CAN2 */
+			can2: flexcan@02094000 {
 				reg = <0x02094000 0x4000>;
 				interrupts = <0 111 0x04>;
 			};
 
-			gpt@02098000 {
+			gpt: gpt@02098000 {
 				compatible = "fsl,imx6q-gpt";
 				reg = <0x02098000 0x4000>;
 				interrupts = <0 55 0x04>;
@@ -373,19 +381,19 @@
 				#interrupt-cells = <2>;
 			};
 
-			kpp@020b8000 {
+			kpp: kpp@020b8000 {
 				reg = <0x020b8000 0x4000>;
 				interrupts = <0 82 0x04>;
 			};
 
-			wdog@020bc000 { /* WDOG1 */
+			wdog1: wdog@020bc000 {
 				compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
 				reg = <0x020bc000 0x4000>;
 				interrupts = <0 80 0x04>;
 				clocks = <&clks 0>;
 			};
 
-			wdog@020c0000 { /* WDOG2 */
+			wdog2: wdog@020c0000 {
 				compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
 				reg = <0x020c0000 0x4000>;
 				interrupts = <0 81 0x04>;
@@ -447,7 +455,7 @@
 					anatop-max-voltage = <2750000>;
 				};
 
-				regulator-vddcore@140 {
+				reg_cpu: regulator-vddcore@140 {
 					compatible = "fsl,anatop-regulator";
 					regulator-name = "cpu";
 					regulator-min-microvolt = <725000>;
@@ -505,27 +513,35 @@
 			};
 
 			snvs@020cc000 {
-				reg = <0x020cc000 0x4000>;
-				interrupts = <0 19 0x04 0 20 0x04>;
+				compatible = "fsl,sec-v4.0-mon", "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x020cc000 0x4000>;
+
+				snvs-rtc-lp@34 {
+					compatible = "fsl,sec-v4.0-mon-rtc-lp";
+					reg = <0x34 0x58>;
+					interrupts = <0 19 0x04 0 20 0x04>;
+				};
 			};
 
-			epit@020d0000 { /* EPIT1 */
+			epit1: epit@020d0000 { /* EPIT1 */
 				reg = <0x020d0000 0x4000>;
 				interrupts = <0 56 0x04>;
 			};
 
-			epit@020d4000 { /* EPIT2 */
+			epit2: epit@020d4000 { /* EPIT2 */
 				reg = <0x020d4000 0x4000>;
 				interrupts = <0 57 0x04>;
 			};
 
-			src@020d8000 {
+			src: src@020d8000 {
 				compatible = "fsl,imx6q-src";
 				reg = <0x020d8000 0x4000>;
 				interrupts = <0 91 0x04 0 96 0x04>;
 			};
 
-			gpc@020dc000 {
+			gpc: gpc@020dc000 {
 				compatible = "fsl,imx6q-gpc";
 				reg = <0x020dc000 0x4000>;
 				interrupts = <0 89 0x04 0 90 0x04>;
@@ -536,7 +552,7 @@
 				reg = <0x020e0000 0x38>;
 			};
 
-			iomuxc@020e0000 {
+			iomuxc: iomuxc@020e0000 {
 				compatible = "fsl,imx6q-iomuxc";
 				reg = <0x020e0000 0x4000>;
 
@@ -748,17 +764,17 @@
 				};
 			};
 
-			dcic@020e4000 { /* DCIC1 */
+			dcic1: dcic@020e4000 {
 				reg = <0x020e4000 0x4000>;
 				interrupts = <0 124 0x04>;
 			};
 
-			dcic@020e8000 { /* DCIC2 */
+			dcic2: dcic@020e8000 {
 				reg = <0x020e8000 0x4000>;
 				interrupts = <0 125 0x04>;
 			};
 
-			sdma@020ec000 {
+			sdma: sdma@020ec000 {
 				compatible = "fsl,imx6q-sdma", "fsl,imx35-sdma";
 				reg = <0x020ec000 0x4000>;
 				interrupts = <0 2 0x04>;
@@ -784,7 +800,7 @@
 				reg = <0x0217c000 0x4000>;
 			};
 
-			usb@02184000 { /* USB OTG */
+			usbotg: usb@02184000 {
 				compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
 				reg = <0x02184000 0x200>;
 				interrupts = <0 43 0x04>;
@@ -794,7 +810,7 @@
 				status = "disabled";
 			};
 
-			usb@02184200 { /* USB1 */
+			usbh1: usb@02184200 {
 				compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
 				reg = <0x02184200 0x200>;
 				interrupts = <0 40 0x04>;
@@ -804,7 +820,7 @@
 				status = "disabled";
 			};
 
-			usb@02184400 { /* USB2 */
+			usbh2: usb@02184400 {
 				compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
 				reg = <0x02184400 0x200>;
 				interrupts = <0 41 0x04>;
@@ -813,7 +829,7 @@
 				status = "disabled";
 			};
 
-			usb@02184600 { /* USB3 */
+			usbh3: usb@02184600 {
 				compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
 				reg = <0x02184600 0x200>;
 				interrupts = <0 42 0x04>;
@@ -822,14 +838,14 @@
 				status = "disabled";
 			};
 
-			usbmisc: usbmisc@02184800 {
+			usbmisc: usbmisc: usbmisc@02184800 {
 				#index-cells = <1>;
 				compatible = "fsl,imx6q-usbmisc";
 				reg = <0x02184800 0x200>;
 				clocks = <&clks 162>;
 			};
 
-			ethernet@02188000 {
+			fec: ethernet@02188000 {
 				compatible = "fsl,imx6q-fec";
 				reg = <0x02188000 0x4000>;
 				interrupts = <0 118 0x04 0 119 0x04>;
@@ -843,43 +859,47 @@
 				interrupts = <0 53 0x04 0 117 0x04 0 126 0x04>;
 			};
 
-			usdhc@02190000 { /* uSDHC1 */
+			usdhc1: usdhc@02190000 {
 				compatible = "fsl,imx6q-usdhc";
 				reg = <0x02190000 0x4000>;
 				interrupts = <0 22 0x04>;
 				clocks = <&clks 163>, <&clks 163>, <&clks 163>;
 				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
 				status = "disabled";
 			};
 
-			usdhc@02194000 { /* uSDHC2 */
+			usdhc2: usdhc@02194000 {
 				compatible = "fsl,imx6q-usdhc";
 				reg = <0x02194000 0x4000>;
 				interrupts = <0 23 0x04>;
 				clocks = <&clks 164>, <&clks 164>, <&clks 164>;
 				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
 				status = "disabled";
 			};
 
-			usdhc@02198000 { /* uSDHC3 */
+			usdhc3: usdhc@02198000 {
 				compatible = "fsl,imx6q-usdhc";
 				reg = <0x02198000 0x4000>;
 				interrupts = <0 24 0x04>;
 				clocks = <&clks 165>, <&clks 165>, <&clks 165>;
 				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
 				status = "disabled";
 			};
 
-			usdhc@0219c000 { /* uSDHC4 */
+			usdhc4: usdhc@0219c000 {
 				compatible = "fsl,imx6q-usdhc";
 				reg = <0x0219c000 0x4000>;
 				interrupts = <0 25 0x04>;
 				clocks = <&clks 166>, <&clks 166>, <&clks 166>;
 				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
 				status = "disabled";
 			};
 
-			i2c@021a0000 { /* I2C1 */
+			i2c1: i2c@021a0000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
@@ -889,7 +909,7 @@
 				status = "disabled";
 			};
 
-			i2c@021a4000 { /* I2C2 */
+			i2c2: i2c@021a4000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
@@ -899,7 +919,7 @@
 				status = "disabled";
 			};
 
-			i2c@021a8000 { /* I2C3 */
+			i2c3: i2c@021a8000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
@@ -913,12 +933,12 @@
 				reg = <0x021ac000 0x4000>;
 			};
 
-			mmdc@021b0000 { /* MMDC0 */
+			mmdc0: mmdc@021b0000 { /* MMDC0 */
 				compatible = "fsl,imx6q-mmdc";
 				reg = <0x021b0000 0x4000>;
 			};
 
-			mmdc@021b4000 { /* MMDC1 */
+			mmdc1: mmdc@021b4000 { /* MMDC1 */
 				reg = <0x021b4000 0x4000>;
 			};
 
@@ -946,7 +966,7 @@
 				interrupts = <0 109 0x04>;
 			};
 
-			audmux@021d8000 {
+			audmux: audmux@021d8000 {
 				compatible = "fsl,imx6q-audmux", "fsl,imx31-audmux";
 				reg = <0x021d8000 0x4000>;
 				status = "disabled";

arch/arm/include/debug/imx.S

@@ -10,6 +10,20 @@
  * published by the Free Software Foundation.
  *
  */
+#define IMX6Q_UART1_BASE_ADDR	0x02020000
+#define IMX6Q_UART2_BASE_ADDR	0x021e8000
+#define IMX6Q_UART3_BASE_ADDR	0x021ec000
+#define IMX6Q_UART4_BASE_ADDR	0x021f0000
+#define IMX6Q_UART5_BASE_ADDR	0x021f4000
+
+/*
+ * IMX6Q_UART_BASE_ADDR is put in the middle to force the expansion
+ * of IMX6Q_UART##n##_BASE_ADDR.
+ */
+#define IMX6Q_UART_BASE_ADDR(n)	IMX6Q_UART##n##_BASE_ADDR
+#define IMX6Q_UART_BASE(n)	IMX6Q_UART_BASE_ADDR(n)
+#define IMX6Q_DEBUG_UART_BASE	IMX6Q_UART_BASE(CONFIG_DEBUG_IMX6Q_UART_PORT)
+
 #ifdef CONFIG_DEBUG_IMX1_UART
 #define UART_PADDR	0x00206000
 #elif defined (CONFIG_DEBUG_IMX25_UART)
@@ -22,10 +36,8 @@
 #define UART_PADDR	0x73fbc000
 #elif defined (CONFIG_DEBUG_IMX50_IMX53_UART)
 #define UART_PADDR	0x53fbc000
-#elif defined (CONFIG_DEBUG_IMX6Q_UART2)
-#define UART_PADDR	0x021e8000
-#elif defined (CONFIG_DEBUG_IMX6Q_UART4)
-#define UART_PADDR	0x021f0000
+#elif defined (CONFIG_DEBUG_IMX6Q_UART)
+#define UART_PADDR	IMX6Q_DEBUG_UART_BASE
 #endif
 
 /*

arch/arm/mach-imx/Kconfig

@@ -836,7 +836,14 @@ config	SOC_IMX53
 
 config SOC_IMX6Q
 	bool "i.MX6 Quad support"
+	select ARCH_HAS_CPUFREQ
+	select ARCH_HAS_OPP
 	select ARM_CPU_SUSPEND if PM
+	select ARM_ERRATA_743622
+	select ARM_ERRATA_751472
+	select ARM_ERRATA_754322
+	select ARM_ERRATA_764369 if SMP
+	select ARM_ERRATA_775420
 	select ARM_GIC
 	select COMMON_CLK
 	select CPU_V7
@@ -848,6 +855,10 @@ config SOC_IMX6Q
 	select MFD_SYSCON
 	select PINCTRL
 	select PINCTRL_IMX6Q
+	select PL310_ERRATA_588369 if CACHE_PL310
+	select PL310_ERRATA_727915 if CACHE_PL310
+	select PL310_ERRATA_769419 if CACHE_PL310
+	select PM_OPP if PM
 
 	help
 	  This enables support for Freescale i.MX6 Quad processor.

arch/arm/mach-imx/clk-imx6q.c

@@ -406,6 +406,7 @@ int __init mx6q_clocks_init(void)
 	clk_register_clkdev(clk[cko1_sel], "cko1_sel", NULL);
 	clk_register_clkdev(clk[ahb], "ahb", NULL);
 	clk_register_clkdev(clk[cko1], "cko1", NULL);
+	clk_register_clkdev(clk[arm], NULL, "cpu0");
 
 	/*
 	 * The gpmi needs 100MHz frequency in the EDO/Sync mode,

arch/arm/mach-imx/lluart.c

@@ -17,17 +17,25 @@
 
 #include "hardware.h"
 
+#define IMX6Q_UART1_BASE_ADDR	0x02020000
+#define IMX6Q_UART2_BASE_ADDR	0x021e8000
+#define IMX6Q_UART3_BASE_ADDR	0x021ec000
+#define IMX6Q_UART4_BASE_ADDR	0x021f0000
+#define IMX6Q_UART5_BASE_ADDR	0x021f4000
+
+/*
+ * IMX6Q_UART_BASE_ADDR is put in the middle to force the expansion
+ * of IMX6Q_UART##n##_BASE_ADDR.
+ */
+#define IMX6Q_UART_BASE_ADDR(n)	IMX6Q_UART##n##_BASE_ADDR
+#define IMX6Q_UART_BASE(n)	IMX6Q_UART_BASE_ADDR(n)
+#define IMX6Q_DEBUG_UART_BASE	IMX6Q_UART_BASE(CONFIG_DEBUG_IMX6Q_UART_PORT)
+
 static struct map_desc imx_lluart_desc = {
-#ifdef CONFIG_DEBUG_IMX6Q_UART2
-	.virtual	= MX6Q_IO_P2V(MX6Q_UART2_BASE_ADDR),
-	.pfn		= __phys_to_pfn(MX6Q_UART2_BASE_ADDR),
-	.length		= MX6Q_UART2_SIZE,
-	.type		= MT_DEVICE,
-#endif
-#ifdef CONFIG_DEBUG_IMX6Q_UART4
-	.virtual	= MX6Q_IO_P2V(MX6Q_UART4_BASE_ADDR),
-	.pfn		= __phys_to_pfn(MX6Q_UART4_BASE_ADDR),
-	.length		= MX6Q_UART4_SIZE,
+#ifdef CONFIG_DEBUG_IMX6Q_UART
+	.virtual	= IMX_IO_P2V(IMX6Q_DEBUG_UART_BASE),
+	.pfn		= __phys_to_pfn(IMX6Q_DEBUG_UART_BASE),
+	.length		= 0x4000,
 	.type		= MT_DEVICE,
 #endif
 };

arch/arm/mach-imx/mach-imx6q.c

@@ -38,6 +38,40 @@
 #include "cpuidle.h"
 #include "hardware.h"
 
+#define IMX6Q_ANALOG_DIGPROG	0x260
+
+static int imx6q_revision(void)
+{
+	struct device_node *np;
+	void __iomem *base;
+	static u32 rev;
+
+	if (!rev) {
+		np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-anatop");
+		if (!np)
+			return IMX_CHIP_REVISION_UNKNOWN;
+		base = of_iomap(np, 0);
+		if (!base) {
+			of_node_put(np);
+			return IMX_CHIP_REVISION_UNKNOWN;
+		}
+		rev =  readl_relaxed(base + IMX6Q_ANALOG_DIGPROG);
+		iounmap(base);
+		of_node_put(np);
+	}
+
+	switch (rev & 0xff) {
+	case 0:
+		return IMX_CHIP_REVISION_1_0;
+	case 1:
+		return IMX_CHIP_REVISION_1_1;
+	case 2:
+		return IMX_CHIP_REVISION_1_2;
+	default:
+		return IMX_CHIP_REVISION_UNKNOWN;
+	}
+}
+
 void imx6q_restart(char mode, const char *cmd)
 {
 	struct device_node *np;
@@ -192,6 +226,7 @@ static void __init imx6q_timer_init(void)
 {
 	mx6q_clocks_init();
 	twd_local_timer_of_register();
+	imx_print_silicon_rev("i.MX6Q", imx6q_revision());
 }
 
 static struct sys_timer imx6q_timer = {

arch/arm/mach-imx/mx6q.h

@@ -27,9 +27,5 @@
 #define MX6Q_CCM_SIZE			0x4000
 #define MX6Q_ANATOP_BASE_ADDR		0x020c8000
 #define MX6Q_ANATOP_SIZE		0x1000
-#define MX6Q_UART2_BASE_ADDR		0x021e8000
-#define MX6Q_UART2_SIZE			0x4000
-#define MX6Q_UART4_BASE_ADDR		0x021f0000
-#define MX6Q_UART4_SIZE			0x4000
 
 #endif	/* __MACH_MX6Q_H__ */