linux-vybrid_public/arch/arm/boot/dts/imx53.dtsi

/*
 * Copyright 2011 Freescale Semiconductor, Inc.
 * Copyright 2011 Linaro Ltd.
 *
 * The code contained herein is licensed under the GNU General Public
 * License. You may obtain a copy of the GNU General Public License
 * Version 2 or later at the following locations:
 *
 * http://www.opensource.org/licenses/gpl-license.html
 * http://www.gnu.org/copyleft/gpl.html
 */

/include/ "skeleton.dtsi"

/ {
	aliases {
		serial0 = &uart1;
		serial1 = &uart2;
		serial2 = &uart3;
		serial3 = &uart4;
		serial4 = &uart5;
		gpio0 = &gpio1;
		gpio1 = &gpio2;
		gpio2 = &gpio3;
		gpio3 = &gpio4;
		gpio4 = &gpio5;
		gpio5 = &gpio6;
		gpio6 = &gpio7;
	};

	tzic: tz-interrupt-controller@0fffc000 {
		compatible = "fsl,imx53-tzic", "fsl,tzic";
		interrupt-controller;
		#interrupt-cells = <1>;
		reg = <0x0fffc000 0x4000>;
	};

	clocks {
		#address-cells = <1>;
		#size-cells = <0>;

		ckil {
			compatible = "fsl,imx-ckil", "fixed-clock";
			clock-frequency = <32768>;
		};

		ckih1 {
			compatible = "fsl,imx-ckih1", "fixed-clock";
			clock-frequency = <22579200>;
		};

		ckih2 {
			compatible = "fsl,imx-ckih2", "fixed-clock";
			clock-frequency = <0>;
		};

		osc {
			compatible = "fsl,imx-osc", "fixed-clock";
			clock-frequency = <24000000>;
		};
	};

	soc {
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "simple-bus";
		interrupt-parent = <&tzic>;
		ranges;

		aips@50000000 { /* AIPS1 */
			compatible = "fsl,aips-bus", "simple-bus";
			#address-cells = <1>;
			#size-cells = <1>;
			reg = <0x50000000 0x10000000>;
			ranges;

			spba@50000000 {
				compatible = "fsl,spba-bus", "simple-bus";
				#address-cells = <1>;
				#size-cells = <1>;
				reg = <0x50000000 0x40000>;
				ranges;

				esdhc1: esdhc@50004000 {
					compatible = "fsl,imx53-esdhc";
					reg = <0x50004000 0x4000>;
					interrupts = <1>;
					bus-width = <4>;
					status = "disabled";
				};

				esdhc2: esdhc@50008000 {
					compatible = "fsl,imx53-esdhc";
					reg = <0x50008000 0x4000>;
					interrupts = <2>;
					bus-width = <4>;
					status = "disabled";
				};

				uart3: serial@5000c000 {
					compatible = "fsl,imx53-uart", "fsl,imx21-uart";
					reg = <0x5000c000 0x4000>;
					interrupts = <33>;
					status = "disabled";
				};

				ecspi1: ecspi@50010000 {
					#address-cells = <1>;
					#size-cells = <0>;
					compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi";
					reg = <0x50010000 0x4000>;
					interrupts = <36>;
					status = "disabled";
				};

				ssi2: ssi@50014000 {
					compatible = "fsl,imx53-ssi", "fsl,imx21-ssi";
					reg = <0x50014000 0x4000>;
					interrupts = <30>;
					fsl,fifo-depth = <15>;
					fsl,ssi-dma-events = <25 24 23 22>; /* TX0 RX0 TX1 RX1 */
					status = "disabled";
				};

				esdhc3: esdhc@50020000 {
					compatible = "fsl,imx53-esdhc";
					reg = <0x50020000 0x4000>;
					interrupts = <3>;
					bus-width = <4>;
					status = "disabled";
				};

				esdhc4: esdhc@50024000 {
					compatible = "fsl,imx53-esdhc";
					reg = <0x50024000 0x4000>;
					interrupts = <4>;
					bus-width = <4>;
					status = "disabled";
				};
			};

			usbotg: usb@53f80000 {
				compatible = "fsl,imx53-usb", "fsl,imx27-usb";
				reg = <0x53f80000 0x0200>;
				interrupts = <18>;
				status = "disabled";
			};

			usbh1: usb@53f80200 {
				compatible = "fsl,imx53-usb", "fsl,imx27-usb";
				reg = <0x53f80200 0x0200>;
				interrupts = <14>;
				status = "disabled";
			};

			usbh2: usb@53f80400 {
				compatible = "fsl,imx53-usb", "fsl,imx27-usb";
				reg = <0x53f80400 0x0200>;
				interrupts = <16>;
				status = "disabled";
			};

			usbh3: usb@53f80600 {
				compatible = "fsl,imx53-usb", "fsl,imx27-usb";
				reg = <0x53f80600 0x0200>;
				interrupts = <17>;
				status = "disabled";
			};

			gpio1: gpio@53f84000 {
				compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
				reg = <0x53f84000 0x4000>;
				interrupts = <50 51>;
				gpio-controller;
				#gpio-cells = <2>;
				interrupt-controller;
				#interrupt-cells = <2>;
			};

			gpio2: gpio@53f88000 {
				compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
				reg = <0x53f88000 0x4000>;
				interrupts = <52 53>;
				gpio-controller;
				#gpio-cells = <2>;
				interrupt-controller;
				#interrupt-cells = <2>;
			};

			gpio3: gpio@53f8c000 {
				compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
				reg = <0x53f8c000 0x4000>;
				interrupts = <54 55>;
				gpio-controller;
				#gpio-cells = <2>;
				interrupt-controller;
				#interrupt-cells = <2>;
			};

			gpio4: gpio@53f90000 {
				compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
				reg = <0x53f90000 0x4000>;
				interrupts = <56 57>;
				gpio-controller;
				#gpio-cells = <2>;
				interrupt-controller;
				#interrupt-cells = <2>;
			};

			wdog1: wdog@53f98000 {
				compatible = "fsl,imx53-wdt", "fsl,imx21-wdt";
				reg = <0x53f98000 0x4000>;
				interrupts = <58>;
			};

			wdog2: wdog@53f9c000 {
				compatible = "fsl,imx53-wdt", "fsl,imx21-wdt";
				reg = <0x53f9c000 0x4000>;
				interrupts = <59>;
				status = "disabled";
			};

			iomuxc: iomuxc@53fa8000 {
				compatible = "fsl,imx53-iomuxc";
				reg = <0x53fa8000 0x4000>;

				audmux {
					pinctrl_audmux_1: audmuxgrp-1 {
						fsl,pins = <
							10 0x80000000	/* MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC */
							17 0x80000000	/* MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD */
							23 0x80000000	/* MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS */
							30 0x80000000	/* MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD */
						>;
					};
				};

				fec {
					pinctrl_fec_1: fecgrp-1 {
						fsl,pins = <
							820 0x80000000	/* MX53_PAD_FEC_MDC__FEC_MDC */
							779 0x80000000	/* MX53_PAD_FEC_MDIO__FEC_MDIO */
							786 0x80000000	/* MX53_PAD_FEC_REF_CLK__FEC_TX_CLK */
							791 0x80000000	/* MX53_PAD_FEC_RX_ER__FEC_RX_ER */
							796 0x80000000	/* MX53_PAD_FEC_CRS_DV__FEC_RX_DV */
							799 0x80000000	/* MX53_PAD_FEC_RXD1__FEC_RDATA_1 */
							804 0x80000000	/* MX53_PAD_FEC_RXD0__FEC_RDATA_0 */
							808 0x80000000	/* MX53_PAD_FEC_TX_EN__FEC_TX_EN */
							811 0x80000000	/* MX53_PAD_FEC_TXD1__FEC_TDATA_1 */
							816 0x80000000	/* MX53_PAD_FEC_TXD0__FEC_TDATA_0 */
						>;
					};
				};

				ecspi1 {
					pinctrl_ecspi1_1: ecspi1grp-1 {
						fsl,pins = <
							433 0x80000000	/* MX53_PAD_EIM_D16__ECSPI1_SCLK */
							439 0x80000000	/* MX53_PAD_EIM_D17__ECSPI1_MISO */
							445 0x80000000	/* MX53_PAD_EIM_D18__ECSPI1_MOSI */
						>;
					};
				};

				esdhc1 {
					pinctrl_esdhc1_1: esdhc1grp-1 {
						fsl,pins = <
							995  0x1d5	/* MX53_PAD_SD1_DATA0__ESDHC1_DAT0 */
							1000 0x1d5	/* MX53_PAD_SD1_DATA1__ESDHC1_DAT1 */
							1010 0x1d5	/* MX53_PAD_SD1_DATA2__ESDHC1_DAT2 */
							1024 0x1d5	/* MX53_PAD_SD1_DATA3__ESDHC1_DAT3 */
							1005 0x1d5	/* MX53_PAD_SD1_CMD__ESDHC1_CMD */
							1018 0x1d5	/* MX53_PAD_SD1_CLK__ESDHC1_CLK */
						>;
					};

					pinctrl_esdhc1_2: esdhc1grp-2 {
						fsl,pins = <
							995  0x1d5	/* MX53_PAD_SD1_DATA0__ESDHC1_DAT0 */
							1000 0x1d5	/* MX53_PAD_SD1_DATA1__ESDHC1_DAT1 */
							1010 0x1d5	/* MX53_PAD_SD1_DATA2__ESDHC1_DAT2 */
							1024 0x1d5	/* MX53_PAD_SD1_DATA3__ESDHC1_DAT3 */
							941  0x1d5	/* MX53_PAD_PATA_DATA8__ESDHC1_DAT4 */
							948  0x1d5	/* MX53_PAD_PATA_DATA9__ESDHC1_DAT5 */
							955  0x1d5	/* MX53_PAD_PATA_DATA10__ESDHC1_DAT6 */
							962  0x1d5	/* MX53_PAD_PATA_DATA11__ESDHC1_DAT7 */
							1005 0x1d5	/* MX53_PAD_SD1_CMD__ESDHC1_CMD */
							1018 0x1d5	/* MX53_PAD_SD1_CLK__ESDHC1_CLK */
						>;
					};
				};

				esdhc2 {
					pinctrl_esdhc2_1: esdhc2grp-1 {
						fsl,pins = <
							1038 0x1d5	/* MX53_PAD_SD2_CMD__ESDHC2_CMD */
							1032 0x1d5	/* MX53_PAD_SD2_CLK__ESDHC2_CLK */
							1062 0x1d5	/* MX53_PAD_SD2_DATA0__ESDHC2_DAT0 */
							1056 0x1d5	/* MX53_PAD_SD2_DATA1__ESDHC2_DAT1 */
							1050 0x1d5	/* MX53_PAD_SD2_DATA2__ESDHC2_DAT2 */
							1044 0x1d5	/* MX53_PAD_SD2_DATA3__ESDHC2_DAT3 */
						>;
					};
				};

				esdhc3 {
					pinctrl_esdhc3_1: esdhc3grp-1 {
						fsl,pins = <
							943 0x1d5	/* MX53_PAD_PATA_DATA8__ESDHC3_DAT0 */
							950 0x1d5	/* MX53_PAD_PATA_DATA9__ESDHC3_DAT1 */
							957 0x1d5	/* MX53_PAD_PATA_DATA10__ESDHC3_DAT2 */
							964 0x1d5	/* MX53_PAD_PATA_DATA11__ESDHC3_DAT3 */
							893 0x1d5	/* MX53_PAD_PATA_DATA0__ESDHC3_DAT4 */
							900 0x1d5	/* MX53_PAD_PATA_DATA1__ESDHC3_DAT5 */
							906 0x1d5	/* MX53_PAD_PATA_DATA2__ESDHC3_DAT6 */
							912 0x1d5	/* MX53_PAD_PATA_DATA3__ESDHC3_DAT7 */
							857 0x1d5	/* MX53_PAD_PATA_RESET_B__ESDHC3_CMD */
							863 0x1d5	/* MX53_PAD_PATA_IORDY__ESDHC3_CLK */
						>;
					};
				};

				can1 {
					pinctrl_can1_1: can1grp-1 {
						fsl,pins = <
							847 0x80000000  /* MX53_PAD_PATA_INTRQ__CAN1_TXCAN */
							853 0x80000000  /* MX53_PAD_PATA_DIOR__CAN1_RXCAN */
						>;
					};
				};

				can2 {
					pinctrl_can2_1: can2grp-1 {
						fsl,pins = <
							67  0x80000000  /* MX53_PAD_KEY_COL4__CAN2_TXCAN */
							74  0x80000000  /* MX53_PAD_KEY_ROW4__CAN2_RXCAN */
						>;
					};
				};

				i2c1 {
					pinctrl_i2c1_1: i2c1grp-1 {
						fsl,pins = <
							333 0xc0000000	/* MX53_PAD_CSI0_DAT8__I2C1_SDA */
							341 0xc0000000	/* MX53_PAD_CSI0_DAT9__I2C1_SCL */
						>;
					};
				};

				i2c2 {
					pinctrl_i2c2_1: i2c2grp-1 {
						fsl,pins = <
							61 0xc0000000	/* MX53_PAD_KEY_ROW3__I2C2_SDA */
							53 0xc0000000	/* MX53_PAD_KEY_COL3__I2C2_SCL */
						>;
					};
				};

				i2c3 {
					pinctrl_i2c3_1: i2c3grp-1 {
						fsl,pins = <
							1102 0xc0000000	/* MX53_PAD_GPIO_6__I2C3_SDA */
							1130 0xc0000000	/* MX53_PAD_GPIO_5__I2C3_SCL */
						>;
					};
				};

				uart1 {
					pinctrl_uart1_1: uart1grp-1 {
						fsl,pins = <
							346 0x1c5	/* MX53_PAD_CSI0_DAT10__UART1_TXD_MUX */
							354 0x1c5	/* MX53_PAD_CSI0_DAT11__UART1_RXD_MUX */
						>;
					};

					pinctrl_uart1_2: uart1grp-2 {
						fsl,pins = <
							828 0x1c5	/* MX53_PAD_PATA_DIOW__UART1_TXD_MUX */
							832 0x1c5	/* MX53_PAD_PATA_DMACK__UART1_RXD_MUX */
						>;
					};
				};

				uart2 {
					pinctrl_uart2_1: uart2grp-1 {
						fsl,pins = <
							841 0x1c5	/* MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX */
							836 0x1c5	/* MX53_PAD_PATA_DMARQ__UART2_TXD_MUX */
						>;
					};
				};

				uart3 {
					pinctrl_uart3_1: uart3grp-1 {
						fsl,pins = <
							884 0x1c5	/* MX53_PAD_PATA_CS_0__UART3_TXD_MUX */
							888 0x1c5	/* MX53_PAD_PATA_CS_1__UART3_RXD_MUX */
							875 0x1c5	/* MX53_PAD_PATA_DA_1__UART3_CTS */
							880 0x1c5	/* MX53_PAD_PATA_DA_2__UART3_RTS */
						>;
					};
				};

				uart4 {
					pinctrl_uart4_1: uart4grp-1 {
						fsl,pins = <
							11 0x1c5	/* MX53_PAD_KEY_COL0__UART4_TXD_MUX */
							18 0x1c5	/* MX53_PAD_KEY_ROW0__UART4_RXD_MUX */
						>;
					};
				};

				uart5 {
					pinctrl_uart5_1: uart5grp-1 {
						fsl,pins = <
							24 0x1c5	/* MX53_PAD_KEY_COL1__UART5_TXD_MUX */
							31 0x1c5	/* MX53_PAD_KEY_ROW1__UART5_RXD_MUX */
						>;
					};
				};

			};

			uart1: serial@53fbc000 {
				compatible = "fsl,imx53-uart", "fsl,imx21-uart";
				reg = <0x53fbc000 0x4000>;
				interrupts = <31>;
				status = "disabled";
			};

			uart2: serial@53fc0000 {
				compatible = "fsl,imx53-uart", "fsl,imx21-uart";
				reg = <0x53fc0000 0x4000>;
				interrupts = <32>;
				status = "disabled";
			};

			can1: can@53fc8000 {
				compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan";
				reg = <0x53fc8000 0x4000>;
				interrupts = <82>;
				status = "disabled";
			};

			can2: can@53fcc000 {
				compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan";
				reg = <0x53fcc000 0x4000>;
				interrupts = <83>;
				status = "disabled";
			};

			gpio5: gpio@53fdc000 {
				compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
				reg = <0x53fdc000 0x4000>;
				interrupts = <103 104>;
				gpio-controller;
				#gpio-cells = <2>;
				interrupt-controller;
				#interrupt-cells = <2>;
			};

			gpio6: gpio@53fe0000 {
				compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
				reg = <0x53fe0000 0x4000>;
				interrupts = <105 106>;
				gpio-controller;
				#gpio-cells = <2>;
				interrupt-controller;
				#interrupt-cells = <2>;
			};

			gpio7: gpio@53fe4000 {
				compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
				reg = <0x53fe4000 0x4000>;
				interrupts = <107 108>;
				gpio-controller;
				#gpio-cells = <2>;
				interrupt-controller;
				#interrupt-cells = <2>;
			};

			i2c3: i2c@53fec000 {
				#address-cells = <1>;
				#size-cells = <0>;
				compatible = "fsl,imx53-i2c", "fsl,imx21-i2c";
				reg = <0x53fec000 0x4000>;
				interrupts = <64>;
				status = "disabled";
			};

			uart4: serial@53ff0000 {
				compatible = "fsl,imx53-uart", "fsl,imx21-uart";
				reg = <0x53ff0000 0x4000>;
				interrupts = <13>;
				status = "disabled";
			};
		};

		aips@60000000 {	/* AIPS2 */
			compatible = "fsl,aips-bus", "simple-bus";
			#address-cells = <1>;
			#size-cells = <1>;
			reg = <0x60000000 0x10000000>;
			ranges;

			uart5: serial@63f90000 {
				compatible = "fsl,imx53-uart", "fsl,imx21-uart";
				reg = <0x63f90000 0x4000>;
				interrupts = <86>;
				status = "disabled";
			};

			ecspi2: ecspi@63fac000 {
				#address-cells = <1>;
				#size-cells = <0>;
				compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi";
				reg = <0x63fac000 0x4000>;
				interrupts = <37>;
				status = "disabled";
			};

			sdma: sdma@63fb0000 {
				compatible = "fsl,imx53-sdma", "fsl,imx35-sdma";
				reg = <0x63fb0000 0x4000>;
				interrupts = <6>;
				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin";
			};

			cspi: cspi@63fc0000 {
				#address-cells = <1>;
				#size-cells = <0>;
				compatible = "fsl,imx53-cspi", "fsl,imx35-cspi";
				reg = <0x63fc0000 0x4000>;
				interrupts = <38>;
				status = "disabled";
			};

			i2c2: i2c@63fc4000 {
				#address-cells = <1>;
				#size-cells = <0>;
				compatible = "fsl,imx53-i2c", "fsl,imx21-i2c";
				reg = <0x63fc4000 0x4000>;
				interrupts = <63>;
				status = "disabled";
			};

			i2c1: i2c@63fc8000 {
				#address-cells = <1>;
				#size-cells = <0>;
				compatible = "fsl,imx53-i2c", "fsl,imx21-i2c";
				reg = <0x63fc8000 0x4000>;
				interrupts = <62>;
				status = "disabled";
			};

			ssi1: ssi@63fcc000 {
				compatible = "fsl,imx53-ssi", "fsl,imx21-ssi";
				reg = <0x63fcc000 0x4000>;
				interrupts = <29>;
				fsl,fifo-depth = <15>;
				fsl,ssi-dma-events = <29 28 27 26>; /* TX0 RX0 TX1 RX1 */
				status = "disabled";
			};

			audmux: audmux@63fd0000 {
				compatible = "fsl,imx53-audmux", "fsl,imx31-audmux";
				reg = <0x63fd0000 0x4000>;
				status = "disabled";
			};

			nfc: nand@63fdb000 {
				compatible = "fsl,imx53-nand";
				reg = <0x63fdb000 0x1000 0xf7ff0000 0x10000>;
				interrupts = <8>;
				status = "disabled";
			};

			ssi3: ssi@63fe8000 {
				compatible = "fsl,imx53-ssi", "fsl,imx21-ssi";
				reg = <0x63fe8000 0x4000>;
				interrupts = <96>;
				fsl,fifo-depth = <15>;
				fsl,ssi-dma-events = <47 46 45 44>; /* TX0 RX0 TX1 RX1 */
				status = "disabled";
			};

			fec: ethernet@63fec000 {
				compatible = "fsl,imx53-fec", "fsl,imx25-fec";
				reg = <0x63fec000 0x4000>;
				interrupts = <87>;
				status = "disabled";
			};
		};
	};
};