fbdev: remove cyblafb driver

A tridentfb driver has all the functionality of the cyblafb driver without
the bugs of the latter.

Changes to the tridentfb driver:

- FBINFO_READS_FAST added to the tridentfb.  The cyblafb used a blitter
  for scrolling which is faster than color expansion on Cyberblade
  chipsets.  The blitter is slower on a discrete Blade3D core.  Use the
  blitter for scrolling in the tridentfb only for integrated Blade3D
  cores.  Now, scrolling speed is about equal for the tridentfb and the
  cyblafb.

- a copyright notice addition is done on request of Jani Monoses (the
  first author of the tridentfb).

Tested on AGP Blade3D card and PCChips
M787CLR motherboard: VIA C3 cpu +
VT8601 north  bridge (aka Cyberblade/i1).

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Cc: "Jani Monoses" <jani@ubuntu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Documentation/fb/00-INDEX

@@ -11,8 +11,6 @@ aty128fb.txt
 	- info on the ATI Rage128 frame buffer driver.
 cirrusfb.txt
 	- info on the driver for Cirrus Logic chipsets.
-cyblafb/
-	- directory with documentation files related to the cyblafb driver.
 deferred_io.txt
 	- an introduction to deferred IO.
 fbcon.txt

Documentation/fb/cyblafb/bugs

@@ -1,13 +0,0 @@
-Bugs
-====
-
-I currently don't know of any bug. Please do send reports to:
- - linux-fbdev-devel@lists.sourceforge.net
- - Knut_Petersen@t-online.de.
-
-
-Untested features
-=================
-
-All LCD stuff is untested. If it worked in tridentfb, it should work in
-cyblafb. Please test and report the results to Knut_Petersen@t-online.de.

Documentation/fb/cyblafb/credits

@@ -1,7 +0,0 @@
-Thanks to
-=========
-   * 	Alan Hourihane, for writing the X trident driver
-   *	Jani Monoses, for writing the tridentfb driver
-   *	Antonino A. Daplas, for review of the first published
-	version of cyblafb and some code
-   *	Jochen Hein, for testing and a helpfull bug report

Documentation/fb/cyblafb/documentation

@@ -1,17 +0,0 @@
-Available Documentation
-=======================
-
-Apollo PLE 133 Chipset VT8601A North Bridge Datasheet, Rev. 1.82, October 22,
-2001, available from VIA:
-
-	http://www.viavpsd.com/product/6/15/DS8601A182.pdf
-
-The datasheet is incomplete, some registers that need to be programmed are not
-explained at all and important bits are listed as "reserved". But you really
-need the datasheet to understand the code.  "p. xxx" comments refer to page
-numbers of this document.
-
-XFree/XOrg drivers are available and of good quality, looking at the code
-there is a good idea if the datasheet does not provide enough information
-or if the datasheet seems to be wrong.
-

Documentation/fb/cyblafb/fb.modes

@@ -1,154 +0,0 @@
-#
-#   Sample fb.modes file
-#
-#	Provides an incomplete list of working modes for
-#	the cyberblade/i1 graphics core.
-#
-#	The value 4294967256 is used instead of -40. Of course, -40 is not
-#	a really reasonable value, but chip design does not always follow
-#	logic. Believe me, it's ok, and it's the way the BIOS does it.
-#
-#	fbset requires 4294967256 in fb.modes and -40 as an argument to
-#	the -t parameter. That's also not too reasonable, and it might change
-#	in the future or might even be differt for your current version.
-#
-
-mode "640x480-50"
-    geometry 640 480 2048 4096 8
-    timings 47619 4294967256 24 17 0 216 3
-endmode
-
-mode "640x480-60"
-    geometry 640 480 2048 4096 8
-    timings 39682 4294967256 24 17 0 216 3
-endmode
-
-mode "640x480-70"
-    geometry 640 480 2048 4096 8
-    timings 34013 4294967256 24 17 0 216 3
-endmode
-
-mode "640x480-72"
-    geometry 640 480 2048 4096 8
-    timings 33068 4294967256 24 17 0 216 3
-endmode
-
-mode "640x480-75"
-    geometry 640 480 2048 4096 8
-    timings 31746 4294967256 24 17 0 216 3
-endmode
-
-mode "640x480-80"
-    geometry 640 480 2048 4096 8
-    timings 29761 4294967256 24 17 0 216 3
-endmode
-
-mode "640x480-85"
-    geometry 640 480 2048 4096 8
-    timings 28011 4294967256 24 17 0 216 3
-endmode
-
-mode "800x600-50"
-    geometry 800 600 2048 4096 8
-    timings 30303 96 24 14 0 136 11
-endmode
-
-mode "800x600-60"
-    geometry 800 600 2048 4096 8
-    timings 25252 96 24 14 0 136 11
-endmode
-
-mode "800x600-70"
-    geometry 800 600 2048 4096 8
-    timings 21645 96 24 14 0 136 11
-endmode
-
-mode "800x600-72"
-    geometry 800 600 2048 4096 8
-    timings 21043 96 24 14 0 136 11
-endmode
-
-mode "800x600-75"
-    geometry 800 600 2048 4096 8
-    timings 20202 96 24 14 0 136 11
-endmode
-
-mode "800x600-80"
-    geometry 800 600 2048 4096 8
-    timings 18939 96 24 14 0 136 11
-endmode
-
-mode "800x600-85"
-    geometry 800 600 2048 4096 8
-    timings 17825 96 24 14 0 136 11
-endmode
-
-mode "1024x768-50"
-    geometry 1024 768 2048 4096 8
-    timings 19054 144 24 29 0 120 3
-endmode
-
-mode "1024x768-60"
-    geometry 1024 768 2048 4096 8
-    timings 15880 144 24 29 0 120 3
-endmode
-
-mode "1024x768-70"
-    geometry 1024 768 2048 4096 8
-    timings 13610 144 24 29 0 120 3
-endmode
-
-mode "1024x768-72"
-    geometry 1024 768 2048 4096 8
-    timings 13232 144 24 29 0 120 3
-endmode
-
-mode "1024x768-75"
-    geometry 1024 768 2048 4096 8
-    timings 12703 144 24 29 0 120 3
-endmode
-
-mode "1024x768-80"
-    geometry 1024 768 2048 4096 8
-    timings 11910 144 24 29 0 120 3
-endmode
-
-mode "1024x768-85"
-    geometry 1024 768 2048 4096 8
-    timings 11209 144 24 29 0 120 3
-endmode
-
-mode "1280x1024-50"
-    geometry 1280 1024 2048 4096 8
-    timings 11114 232 16 39 0 160 3
-endmode
-
-mode "1280x1024-60"
-    geometry 1280 1024 2048 4096 8
-    timings 9262 232 16 39 0 160 3
-endmode
-
-mode "1280x1024-70"
-    geometry 1280 1024 2048 4096 8
-    timings 7939 232 16 39 0 160 3
-endmode
-
-mode "1280x1024-72"
-    geometry 1280 1024 2048 4096 8
-    timings 7719 232 16 39 0 160 3
-endmode
-
-mode "1280x1024-75"
-    geometry 1280 1024 2048 4096 8
-    timings 7410 232 16 39 0 160 3
-endmode
-
-mode "1280x1024-80"
-    geometry 1280 1024 2048 4096 8
-    timings 6946 232 16 39 0 160 3
-endmode
-
-mode "1280x1024-85"
-    geometry 1280 1024 2048 4096 8
-    timings 6538 232 16 39 0 160 3
-endmode

Documentation/fb/cyblafb/performance

@@ -1,79 +0,0 @@
-Speed
-=====
-
-CyBlaFB is much faster than tridentfb and vesafb. Compare the performance data
-for mode 1280x1024-[8,16,32]@61 Hz.
-
-Test 1: Cat a file with 2000 lines of 0 characters.
-Test 2: Cat a file with 2000 lines of 80 characters.
-Test 3: Cat a file with 2000 lines of 160 characters.
-
-All values show system time use in seconds, kernel 2.6.12 was used for
-the measurements. 2.6.13 is a bit slower, 2.6.14 hopefully will include a
-patch that speeds up kernel bitblitting a lot ( > 20%).
-
-+-----------+-----------------------------------------------------+
-|	    |			not accelerated 		  |
-| TRIDENTFB +-----------------+-----------------+-----------------+
-| of 2.6.12 |	   8 bpp      |     16 bpp	|     32 bpp	  |
-|	    | noypan |	 ypan | noypan |   ypan | noypan |   ypan |
-+-----------+--------+--------+--------+--------+--------+--------+
-|    Test 1 |	4.31 |	 4.33 |   6.05 |  12.81 |  ----  |  ----  |
-|    Test 2 |  67.94 |	 5.44 | 123.16 |  14.79 |  ----  |  ----  |
-|    Test 3 | 131.36 |	 6.55 | 240.12 |  16.76 |  ----  |  ----  |
-+-----------+--------+--------+--------+--------+--------+--------+
-|  Comments |		      | 		| completely bro- |
-|	    |		      | 		| ken, monitor	  |
-|	    |		      | 		| switches off	  |
-+-----------+-----------------+-----------------+-----------------+
-
-
-+-----------+-----------------------------------------------------+
-|	    |			  accelerated			  |
-| TRIDENTFB +-----------------+-----------------+-----------------+
-| of 2.6.12 |	   8 bpp      |     16 bpp	|     32 bpp	  |
-|	    | noypan |	 ypan | noypan |   ypan | noypan |   ypan |
-+-----------+--------+--------+--------+--------+--------+--------+
-|    Test 1 |  ----  |	----  |  20.62 |   1.22 |  ----  |  ----  |
-|    Test 2 |  ----  |	----  |  22.61 |   3.19 |  ----  |  ----  |
-|    Test 3 |  ----  |	----  |  24.59 |   5.16 |  ----  |  ----  |
-+-----------+--------+--------+--------+--------+--------+--------+
-|  Comments | broken, writing | broken, ok only | completely bro- |
-|	    | to wrong places | if bgcolor is	| ken, monitor	  |
-|	    | on screen + bug | black, bug in	| switches off	  |
-|	    | in fillrect()   | fillrect()	|		  |
-+-----------+-----------------+-----------------+-----------------+
-
-
-+-----------+-----------------------------------------------------+
-|	    |			not accelerated 		  |
-|   VESAFB  +-----------------+-----------------+-----------------+
-| of 2.6.12 |	   8 bpp      |     16 bpp	|     32 bpp	  |
-|	    | noypan |	 ypan | noypan |   ypan | noypan |   ypan |
-+-----------+--------+--------+--------+--------+--------+--------+
-|    Test 1 |	4.26 |	 3.76 |   5.99 |   7.23 |  ----  |  ----  |
-|    Test 2 |  65.65 |	 4.89 | 120.88 |   9.08 |  ----  |  ----  |
-|    Test 3 | 126.91 |	 5.94 | 235.77 |  11.03 |  ----  |  ----  |
-+-----------+--------+--------+--------+--------+--------+--------+
-|  Comments | vga=0x307       | vga=0x31a	| vga=0x31b not   |
-|	    | fh=80kHz	      | fh=80kHz	| supported by	  |
-|	    | fv=75kHz	      | fv=75kHz	| video BIOS and  |
-|	    |		      | 		| hardware	  |
-+-----------+-----------------+-----------------+-----------------+
-
-
-+-----------+-----------------------------------------------------+
-|	    |			  accelerated			  |
-|  CYBLAFB  +-----------------+-----------------+-----------------+
-|	    |	   8 bpp      |     16 bpp	|     32 bpp	  |
-|	    | noypan |	 ypan | noypan |   ypan | noypan |   ypan |
-+-----------+--------+--------+--------+--------+--------+--------+
-|    Test 1 |	8.02 |	 0.23 |  19.04 |   0.61 |  57.12 |   2.74 |
-|    Test 2 |	8.38 |	 0.55 |  19.39 |   0.92 |  57.54 |   3.13 |
-|    Test 3 |	8.73 |	 0.86 |  19.74 |   1.24 |  57.95 |   3.51 |
-+-----------+--------+--------+--------+--------+--------+--------+
-|  Comments |		      | 		|		  |
-|	    |		      | 		|		  |
-|	    |		      | 		|		  |
-|	    |		      | 		|		  |
-+-----------+-----------------+-----------------+-----------------+

Documentation/fb/cyblafb/todo

@@ -1,31 +0,0 @@
-TODO / Missing features
-=======================
-
-Verify LCD stuff		"stretch" and "center" options are
-				completely untested ... this code needs to be
-				verified. As I don't have access to such
-				hardware, please contact me if you are
-				willing run some tests.
-
-Interlaced video modes		The reason that interleaved
-				modes are disabled is that I do not know
-				the meaning of the vertical interlace
-				parameter. Also the datasheet mentions a
-				bit d8 of a horizontal interlace parameter,
-				but nowhere the lower 8 bits. Please help
-				if you can.
-
-low-res double scan modes	Who needs it?
-
-accelerated color blitting	Who needs it? The console driver does use color
-				blitting for nothing but drawing the penguine,
-				everything else is done using color expanding
-				blitting of 1bpp character bitmaps.
-
-ioctls				Who needs it?
-
-TV-out				Will be done later. Use "vga= " at boot time
-				to set a suitable video mode.
-
-???				Feel free to contact me if you have any
-				feature requests

Documentation/fb/cyblafb/usage

@@ -1,217 +0,0 @@
-CyBlaFB is a framebuffer driver for the Cyberblade/i1 graphics core integrated
-into the VIA Apollo PLE133 (aka vt8601) south bridge. It is developed and
-tested using a VIA EPIA 5000 board.
-
-Cyblafb - compiled into the kernel or as a module?
-==================================================
-
-You might compile cyblafb either as a module or compile it permanently into the
-kernel.
-
-Unless you have a real reason to do so you should not compile both vesafb and
-cyblafb permanently into the kernel. It's possible and it helps during the
-developement cycle, but it's useless and will at least block some otherwise
-usefull memory for ordinary users.
-
-Selecting Modes
-===============
-
-	Startup Mode
-	============
-
-	First of all, you might use the "vga=???" boot parameter as it is
-	documented in vesafb.txt and svga.txt. Cyblafb will detect the video
-	mode selected and will use the geometry and timings found by
-	inspecting the hardware registers.
-
-		video=cyblafb vga=0x317
-
-	Alternatively you might use a combination of the mode, ref and bpp
-	parameters. If you compiled the driver into the kernel, add something
-	like this to the kernel command line:
-
-		video=cyblafb:1280x1024,bpp=16,ref=50 ...
-
-	If you compiled the driver as a module, the same mode would be
-	selected by the following command:
-
-		modprobe cyblafb mode=1280x1024 bpp=16 ref=50 ...
-
-	None of the modes possible to select as startup modes are affected by
-	the problems described at the end of the next subsection.
-
-	For all startup modes cyblafb chooses a virtual x resolution of 2048,
-	the only exception is mode 1280x1024 in combination with 32 bpp. This
-	allows ywrap scrolling for all those modes if rotation is 0 or 2, and
-	also fast scrolling if rotation is 1 or 3. The default virtual y reso-
-	lution is 4096 for bpp == 8, 2048 for bpp==16 and 1024 for bpp == 32,
-	again with the only exception of 1280x1024 at 32 bpp.
-
-	Please do set your video memory size to 8 Mb in the Bios setup. Other
-	values will work, but performace is decreased for a lot of modes.
-
-	Mode changes using fbset
-	========================
-
-	You might use fbset to change the video mode, see "man fbset". Cyblafb
-	generally does assume that you know what you are doing. But it does
-	some checks, especially those that are needed to prevent you from
-	damaging your hardware.
-
-		- only 8, 16, 24 and 32 bpp video modes are accepted
-		- interlaced video modes are not accepted
-		- double scan video modes are not accepted
-		- if a flat panel is found, cyblafb does not allow you
-		  to program a resolution higher than the physical
-		  resolution of the flat panel monitor
-		- cyblafb does not allow vclk to exceed 230 MHz. As 32 bpp
-		  and (currently) 24 bit modes use a doubled vclk internally,
-		  the dotclock limit as seen by fbset is 115 MHz for those
-		  modes and 230 MHz for 8 and 16 bpp modes.
-		- cyblafb will allow you to select very high resolutions as
-		  long as the hardware can be programmed to these modes. The
-		  documented limit 1600x1200 is not enforced, but don't expect
-		  perfect signal quality.
-
-	Any request that violates the rules given above will be either changed
-	to something the hardware supports or an error value will be returned.
-
-	If you program a virtual y resolution higher than the hardware limit,
-	cyblafb will silently decrease that value to the highest possible
-	value. The same is true for a virtual x resolution that is not
-	supported by the hardware. Cyblafb tries to adapt vyres first because
-	vxres decides if ywrap scrolling is possible or not.
-
-	Attempts to disable acceleration are ignored, I believe that this is
-	safe.
-
-	Some video modes that should work do not work as expected. If you use
-	the standard fb.modes, fbset 640x480-60 will program that mode, but
-	you will see a vertical area, about two characters wide, with only
-	much darker characters than the other characters on the screen.
-	Cyblafb does allow that mode to be set, as it does not violate the
-	official specifications. It would need a lot of code to reliably sort
-	out all invalid modes, playing around with the margin values will
-	give a valid mode quickly. And if cyblafb would detect such an invalid
-	mode, should it silently alter the requested values or should it
-	report an error? Both options have some pros and cons. As stated
-	above, none of the startup modes are affected, and if you set
-	verbosity to 1 or higher, cyblafb will print the fbset command that
-	would be needed to program that mode using fbset.
-
-
-Other Parameters
-================
-
-
-crt		don't autodetect, assume monitor connected to
-		standard VGA connector
-
-fp		don't autodetect, assume flat panel display
-		connected to flat panel monitor interface
-
-nativex 	inform driver about native x resolution of
-		flat panel monitor connected to special
-		interface (should be autodetected)
-
-stretch 	stretch image to adapt low resolution modes to
-		higer resolutions of flat panel monitors
-		connected to special interface
-
-center		center image to adapt low resolution modes to
-		higer resolutions of flat panel monitors
-		connected to special interface
-
-memsize 	use if autodetected memsize is wrong ...
-		should never be necessary
-
-nopcirr 	disable PCI read retry
-nopciwr 	disable PCI write retry
-nopcirb 	disable PCI read bursts
-nopciwb 	disable PCI write bursts
-
-bpp		bpp for specified modes
-		valid values: 8 || 16 || 24 || 32
-
-ref		refresh rate for specified mode
-		valid values: 50 <= ref <= 85
-
-mode		640x480 or 800x600 or 1024x768 or 1280x1024
-		if not specified, the startup mode will be detected
-		and used, so you might also use the vga=??? parameter
-		described in vesafb.txt. If you do not specify a mode,
-		bpp and ref parameters are ignored.
-
-verbosity	0 is the default, increase to at least 2 for every
-		bug report!
-
-Development hints
-=================
-
-It's much faster do compile a module and to load the new version after
-unloading the old module than to compile a new kernel and to reboot. So if you
-try to work on cyblafb, it might be a good idea to use cyblafb as a module.
-In real life, fast often means dangerous, and that's also the case here. If
-you introduce a serious bug when cyblafb is compiled into the kernel, the
-kernel will lock or oops with a high probability before the file system is
-mounted, and the danger for your data is low. If you load a broken own version
-of cyblafb on a running system, the danger for the integrity of the file
-system is much higher as you might need a hard reset afterwards. Decide
-yourself.
-
-Module unloading, the vfb method
-================================
-
-If you want to unload/reload cyblafb using the virtual framebuffer, you need
-to enable vfb support in the kernel first. After that, load the modules as
-shown below:
-
-	modprobe vfb vfb_enable=1
-	modprobe fbcon
-	modprobe cyblafb
-	fbset -fb /dev/fb1 1280x1024-60 -vyres 2662
-	con2fb /dev/fb1 /dev/tty1
-	...
-
-If you now made some changes to cyblafb and want to reload it, you might do it
-as show below:
-
-	con2fb /dev/fb0 /dev/tty1
-	...
-	rmmod cyblafb
-	modprobe cyblafb
-	con2fb /dev/fb1 /dev/tty1
-	...
-
-Of course, you might choose another mode, and most certainly you also want to
-map some other /dev/tty* to the real framebuffer device. You might also choose
-to compile fbcon as a kernel module or place it permanently in the kernel.
-
-I do not know of any way to unload fbcon, and fbcon will prevent the
-framebuffer device loaded first from unloading. [If there is a way, then
-please add a description here!]
-
-Module unloading, the vesafb method
-===================================
-
-Configure the kernel:
-
-	<*> Support for frame buffer devices
-	[*]   VESA VGA graphics support
-	<M>   Cyberblade/i1 support
-
-Add e.g. "video=vesafb:ypan vga=0x307" to the kernel parameters. The ypan
-parameter is important, choose any vga parameter you like as long as it is
-a graphics mode.
-
-After booting, load cyblafb without any mode and bpp parameter and assign
-cyblafb to individual ttys using con2fb, e.g.:
-
-	modprobe cyblafb
-	con2fb /dev/fb1 /dev/tty1
-
-Unloading cyblafb works without problems after you assign vesafb to all
-ttys again, e.g.:
-
-	con2fb /dev/fb0 /dev/tty1
-	rmmod cyblafb

Documentation/fb/cyblafb/whatsnew

@@ -1,29 +0,0 @@
-0.62
-====
-
-      - the vesafb parameter has been removed as I decided to allow the
-      	feature without any special parameter.
-
-      - Cyblafb does not use the vga style of panning any longer, now the
-      	"right view" register in the graphics engine IO space is used. Without
-	that change it was impossible to use all available memory, and without
-	access to all available memory it is impossible to ywrap.
-
-      - The imageblit function now uses hardware acceleration for all font
-        widths. Hardware blitting across pixel column 2048 is broken in the
-	cyberblade/i1 graphics core, but we work around that hardware bug.
-
-      - modes with vxres != xres are supported now.
-
-      - ywrap scrolling is supported now and the default. This is a big
-        performance gain.
-
-      - default video modes use vyres > yres and vxres > xres to allow
-        almost optimal scrolling speed for normal and rotated screens
-
-      - some features mainly usefull for debugging the upper layers of the
-        framebuffer system have been added, have a look at the code
-
-      - fixed: Oops after unloading cyblafb when reading /proc/io*
-
-      - we work around some bugs of the higher framebuffer layers.

Documentation/fb/cyblafb/whycyblafb

@@ -1,85 +0,0 @@
-I tried the following framebuffer drivers:
-
-	- TRIDENTFB is full of bugs. Acceleration is broken for Blade3D
-	  graphics cores like the cyberblade/i1. It claims to support a great
-	  number of devices, but documentation for most of these devices is
-	  unfortunately not available. There is _no_ reason to use tridentfb
-	  for cyberblade/i1 + CRT users. VESAFB is faster, and the one
-	  advantage, mode switching, is broken in tridentfb.
-
-	- VESAFB is used by many distributions as a standard. Vesafb does
-	  not support mode switching. VESAFB is a bit faster than the working
-	  configurations of TRIDENTFB, but it is still too slow, even if you
-	  use ypan.
-
-	- EPIAFB (you'll find it on sourceforge) supports the Cyberblade/i1
-	  graphics core, but it still has serious bugs and developement seems
-	  to have stopped. This is the one driver with TV-out support. If you
-	  do need this feature, try epiafb.
-
-None of these drivers was a real option for me.
-
-I believe that is unreasonable to change code that announces to support 20
-devices if I only have more or less sufficient documentation for exactly one
-of these. The risk of breaking device foo while fixing device bar is too high.
-
-So I decided to start CyBlaFB as a stripped down tridentfb.
-
-All code specific to other Trident chips has been removed. After that there
-were a lot of cosmetic changes to increase the readability of the code. All
-register names were changed to those mnemonics used in the datasheet. Function
-and macro names were changed if they hindered easy understanding of the code.
-
-After that I debugged the code and implemented some new features. I'll try to
-give a little summary of the main changes:
-
-	- calculation of vertical and horizontal timings was fixed
-
-	- video signal quality has been improved dramatically
-
-	- acceleration:
-
-		- fillrect and copyarea were fixed and reenabled
-
-		- color expanding imageblit was newly implemented, color
-		  imageblit (only used to draw the penguine) still uses the
-		  generic code.
-
-		- init of the acceleration engine was improved and moved to a
-		  place where it really works ...
-
-		- sync function has a timeout now and tries to reset and
-		  reinit the accel engine if necessary
-
-		- fewer slow copyarea calls when doing ypan scrolling by using
-		  undocumented bit d21 of screen start address stored in
-		  CR2B[5]. BIOS does use it also, so this should be safe.
-
-	- cyblafb rejects any attempt to set modes that would cause vclk
-	  values above reasonable 230 MHz. 32bit modes use a clock
-	  multiplicator of 2, so fbset does show the correct values for
-	  pixclock but not for vclk in this case. The fbset limit is 115 MHz
-	  for 32 bpp modes.
-
-	- cyblafb rejects modes known to be broken or unimplemented (all
-	  interlaced modes, all doublescan modes for now)
-
-	- cyblafb now works independant of the video mode in effect at startup
-	  time (tridentfb does not init all needed registers to reasonable
-	  values)
-
-	- switching between video modes does work reliably now
-
-	- the first video mode now is the one selected on startup using the
-	  vga=???? mechanism or any of
-		- 640x480, 800x600, 1024x768, 1280x1024
-		- 8, 16, 24 or 32 bpp
-		- refresh between 50 Hz and 85 Hz, 1 Hz steps (1280x1024-32
-		  is limited to 63Hz)
-
-	- pci retry and pci burst mode are settable (try to disable if you
-	  experience latency problems)
-
-	- built as a module cyblafb might be unloaded and reloaded using
-	  the vfb module and con2vt or might be used together with vesafb
-

drivers/video/Kconfig

@@ -1597,30 +1597,6 @@ config FB_VT8623
 	  Driver for CastleRock integrated graphics core in the
 	  VIA VT8623 [Apollo CLE266] chipset.
 
-config FB_CYBLA
-	tristate "Cyberblade/i1 support"
-	depends on FB && PCI && X86_32 && !64BIT
-	select FB_CFB_IMAGEBLIT
-	---help---
-	  This driver is supposed to support the Trident Cyberblade/i1
-	  graphics core integrated in the VIA VT8601A North Bridge,
-	  also known as VIA Apollo PLE133.
-
-	  Status:
-	   - Developed, tested and working on EPIA 5000 and EPIA 800.
-	   - Does work reliable on all systems with CRT/LCD connected to
-	     normal VGA ports.
-	   - Should work on systems that do use the internal LCD port, but
-	     this is absolutely not tested.
-
-	  Character imageblit, copyarea and rectangle fill are hw accelerated,
-	  ypan scrolling is used by default.
-
-	  Please do read <file:Documentation/fb/cyblafb/*>.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called cyblafb.
-
 config FB_TRIDENT
 	tristate "Trident support"
 	depends on FB && PCI
@@ -1633,8 +1609,8 @@ config FB_TRIDENT
 	  and Blade XP.
 	  There are also integrated versions of these chips called CyberXXXX,
 	  CyberImage or CyberBlade. These chips are mostly found in laptops
-	  but also on some motherboards. For more information, read
-	  <file:Documentation/fb/tridentfb.txt>
+	  but also on some motherboards including early VIA EPIA motherboards.
+	  For more information, read <file:Documentation/fb/tridentfb.txt>
 
 	  Say Y if you have such a graphics board.
 

drivers/video/cyblafb.c

@@ -1,1683 +0,0 @@
-/*
- * Frame buffer driver for Trident Cyberblade/i1 graphics core
- *
- * Copyright 2005 Knut Petersen <Knut_Petersen@t-online.de>
- *
- * CREDITS:
- *	tridentfb.c by Jani Monoses
- *	see files above for further credits
- *
- */
-
-#define CYBLAFB_DEBUG 0
-#define CYBLAFB_KD_GRAPHICS_QUIRK 1
-
-#define CYBLAFB_PIXMAPSIZE 8192
-
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/fb.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <asm/types.h>
-#include <video/cyblafb.h>
-
-#define VERSION "0.62"
-
-struct cyblafb_par {
-	u32 pseudo_pal[16];
-	struct fb_ops ops;
-};
-
-static struct fb_fix_screeninfo cyblafb_fix __devinitdata = {
-	.id = "CyBla",
-	.type = FB_TYPE_PACKED_PIXELS,
-	.xpanstep = 1,
-	.ypanstep = 1,
-	.ywrapstep = 1,
-	.visual = FB_VISUAL_PSEUDOCOLOR,
-	.accel = FB_ACCEL_NONE,
-};
-
-static char *mode __devinitdata = NULL;
-static int bpp __devinitdata = 8;
-static int ref __devinitdata = 75;
-static int fp __devinitdata;
-static int crt __devinitdata;
-static int memsize __devinitdata;
-
-static int basestride;
-static int vesafb;
-static int nativex;
-static int center;
-static int stretch;
-static int pciwb = 1;
-static int pcirb = 1;
-static int pciwr = 1;
-static int pcirr = 1;
-static int disabled;
-static int verbosity;
-static int displaytype;
-
-static void __iomem *io_virt;	// iospace virtual memory address
-
-module_param(mode, charp, 0);
-module_param(bpp, int, 0);
-module_param(ref, int, 0);
-module_param(fp, int, 0);
-module_param(crt, int, 0);
-module_param(nativex, int, 0);
-module_param(center, int, 0);
-module_param(stretch, int, 0);
-module_param(pciwb, int, 0);
-module_param(pcirb, int, 0);
-module_param(pciwr, int, 0);
-module_param(pcirr, int, 0);
-module_param(memsize, int, 0);
-module_param(verbosity, int, 0);
-
-//=========================================
-//
-// Well, we have to fix the upper layers.
-// Until this has been done, we work around
-// the bugs.
-//
-//=========================================
-
-#if (CYBLAFB_KD_GRAPHICS_QUIRK && CYBLAFB_DEBUG)
-	if (disabled) { \
-		printk("********\n");\
-		dump_stack();\
-		return val;\
-	}
-
-#elif CYBLAFB_KD_GRAPHICS_QUIRK
-#define KD_GRAPHICS_RETURN(val)\
-	if (disabled) {\
-		return val;\
-	}
-#else
-#define KD_GRAPHICS_RETURN(val)
-#endif
-
-//=========================================
-//
-// Port access macros for memory mapped io
-//
-//=========================================
-
-#define out8(r, v) writeb(v, io_virt + r)
-#define out32(r, v) writel(v, io_virt + r)
-#define in8(r) readb(io_virt + r)
-#define in32(r) readl(io_virt + r)
-
-//======================================
-//
-// Hardware access inline functions
-//
-//======================================
-
-static inline u8 read3X4(u32 reg)
-{
-	out8(0x3D4, reg);
-	return in8(0x3D5);
-}
-
-static inline u8 read3C4(u32 reg)
-{
-	out8(0x3C4, reg);
-	return in8(0x3C5);
-}
-
-static inline u8 read3CE(u32 reg)
-{
-	out8(0x3CE, reg);
-	return in8(0x3CF);
-}
-
-static inline void write3X4(u32 reg, u8 val)
-{
-	out8(0x3D4, reg);
-	out8(0x3D5, val);
-}
-
-static inline void write3C4(u32 reg, u8 val)
-{
-	out8(0x3C4, reg);
-	out8(0x3C5, val);
-}
-
-static inline void write3CE(u32 reg, u8 val)
-{
-	out8(0x3CE, reg);
-	out8(0x3CF, val);
-}
-
-static inline void write3C0(u32 reg, u8 val)
-{
-	in8(0x3DA);		// read to reset index
-	out8(0x3C0, reg);
-	out8(0x3C0, val);
-}
-
-//=================================================
-//
-// Enable memory mapped io and unprotect registers
-//
-//=================================================
-
-static void enable_mmio(void)
-{
-	u8 tmp;
-
-	outb(0x0B, 0x3C4);
-	inb(0x3C5);		// Set NEW mode
-	outb(SR0E, 0x3C4);	// write enable a lot of extended ports
-	outb(0x80, 0x3C5);
-
-	outb(SR11, 0x3C4);	// write enable those extended ports that
-	outb(0x87, 0x3C5);	// are not affected by SR0E_New
-
-	outb(CR1E, 0x3d4);	// clear write protect bit for port 0x3c2
-	tmp = inb(0x3d5) & 0xBF;
-	outb(CR1E, 0x3d4);
-	outb(tmp, 0x3d5);
-
-	outb(CR39, 0x3D4);
-	outb(inb(0x3D5) | 0x01, 0x3D5); // Enable mmio
-}
-
-//=================================================
-//
-// Set pixel clock VCLK1
-// - multipliers set elswhere
-// - freq in units of 0.01 MHz
-//
-// Hardware bug: SR18 >= 250 is broken for the
-//		 cyberblade/i1
-//
-//=================================================
-
-static void set_vclk(struct cyblafb_par *par, int freq)
-{
-	u32 m, n, k;
-	int f, fi, d, di;
-	u8 lo = 0, hi = 0;
-
-	d = 2000;
-	k = freq >= 10000 ? 0 : freq >= 5000 ? 1 : freq >= 2500 ? 2 : 3;
-	for (m = 0; m < 64; m++)
-		for (n = 0; n < 250; n++) {
-			fi = (int)(((5864727 * (n + 8)) /
-				    ((m + 2) * (1 << k))) >> 12);
-			if ((di = abs(fi - freq)) < d) {
-				d = di;
-				f = fi;
-				lo = (u8) n;
-				hi = (u8) ((k << 6) | m);
-			}
-		}
-	write3C4(SR19, hi);
-	write3C4(SR18, lo);
-	if (verbosity > 0)
-		output("pixclock = %d.%02d MHz, k/m/n %x %x %x\n",
-		       freq / 100, freq % 100, (hi & 0xc0) >> 6, hi & 0x3f, lo);
-}
-
-//================================================
-//
-// Cyberblade specific Graphics Engine (GE) setup
-//
-//================================================
-
-static void cyblafb_setup_GE(int pitch, int bpp)
-{
-	KD_GRAPHICS_RETURN();
-
-	switch (bpp) {
-	case 8:
-		basestride = ((pitch >> 3) << 20) | (0 << 29);
-		break;
-	case 15:
-		basestride = ((pitch >> 3) << 20) | (5 << 29);
-		break;
-	case 16:
-		basestride = ((pitch >> 3) << 20) | (1 << 29);
-		break;
-	case 24:
-	case 32:
-		basestride = ((pitch >> 3) << 20) | (2 << 29);
-		break;
-	}
-
-	write3X4(CR36, 0x90);	// reset GE
-	write3X4(CR36, 0x80);	// enable GE
-	out32(GE24, 1 << 7);	// reset all GE pointers by toggling
-	out32(GE24, 0); 	//   d7 of GE24
-	write3X4(CR2D, 0x00);	// GE Timinigs, no delays
-	out32(GE6C, 0); 	// Pattern and Style, p 129, ok
-}
-
-//=====================================================================
-//
-// Cyberblade specific syncing
-//
-//   A timeout might be caused by disabled mmio.
-//   Cause:
-//     - bit CR39 & 1 == 0 upon return, X trident driver bug
-//     - kdm bug (KD_GRAPHICS not set on first switch)
-//     - kernel design flaw (it believes in the correctness
-//	 of kdm/X
-//   First we try to sync ignoring that problem, as most of the
-//   time that will succeed immediately and the enable_mmio()
-//   would only degrade performance.
-//
-//=====================================================================
-
-static int cyblafb_sync(struct fb_info *info)
-{
-	u32 status, i = 100000;
-
-	KD_GRAPHICS_RETURN(0);
-
-	while (((status = in32(GE20)) & 0xFe800000) && i != 0)
-		i--;
-
-	if (i == 0) {
-		enable_mmio();
-		i = 1000000;
-		while (((status = in32(GE20)) & 0xFA800000) && i != 0)
-			i--;
-		if (i == 0) {
-			output("GE Timeout, status: %x\n", status);
-			if (status & 0x80000000)
-				output("Bresenham Engine : Busy\n");
-			if (status & 0x40000000)
-				output("Setup Engine     : Busy\n");
-			if (status & 0x20000000)
-				output("SP / DPE         : Busy\n");
-			if (status & 0x10000000)
-				output("Memory Interface : Busy\n");
-			if (status & 0x08000000)
-				output("Com Lst Proc     : Busy\n");
-			if (status & 0x04000000)
-				output("Block Write      : Busy\n");
-			if (status & 0x02000000)
-				output("Command Buffer   : Full\n");
-			if (status & 0x01000000)
-				output("RESERVED         : Busy\n");
-			if (status & 0x00800000)
-				output("PCI Write Buffer : Busy\n");
-			cyblafb_setup_GE(info->var.xres,
-					 info->var.bits_per_pixel);
-		}
-	}
-
-	return 0;
-}
-
-//==============================
-//
-// Cyberblade specific fillrect
-//
-//==============================
-
-static void cyblafb_fillrect(struct fb_info *info, const struct fb_fillrect *fr)
-{
-	u32 bpp = info->var.bits_per_pixel, col, desty, height;
-
-	KD_GRAPHICS_RETURN();
-
-	switch (bpp) {
-	default:
-	case 8:
-		col = fr->color;
-		col |= col << 8;
-		col |= col << 16;
-		break;
-	case 16:
-		col = ((u32 *) (info->pseudo_palette))[fr->color];
-		col |= col << 16;
-		break;
-	case 32:
-		col = ((u32 *) (info->pseudo_palette))[fr->color];
-		break;
-	}
-
-	desty = fr->dy;
-	height = fr->height;
-	while (height) {
-		out32(GEB8, basestride | ((desty * info->var.xres_virtual *
-					   bpp) >> 6));
-		out32(GE60, col);
-		out32(GE48, fr->rop ? 0x66 : ROP_S);
-		out32(GE44, 0x20000000 | 1 << 19 | 1 << 4 | 2 << 2);
-		out32(GE08, point(fr->dx, 0));
-		out32(GE0C, point(fr->dx + fr->width - 1,
-				  height > 4096 ? 4095 : height - 1));
-		if (likely(height <= 4096))
-			return;
-		desty += 4096;
-		height -= 4096;
-	}
-}
-
-//================================================
-//
-// Cyberblade specific copyarea
-//
-// This function silently assumes that it never
-// will be called with width or height exceeding
-// 4096.
-//
-//================================================
-
-static void cyblafb_copyarea(struct fb_info *info, const struct fb_copyarea *ca)
-{
-	u32 s1, s2, d1, d2, direction;
-
-	KD_GRAPHICS_RETURN();
-
-	s1 = point(ca->sx, 0);
-	s2 = point(ca->sx + ca->width - 1, ca->height - 1);
-	d1 = point(ca->dx, 0);
-	d2 = point(ca->dx + ca->width - 1, ca->height - 1);
-
-	if ((ca->sy > ca->dy) || ((ca->sy == ca->dy) && (ca->sx > ca->dx)))
-		direction = 0;
-	else
-		direction = 2;
-
-	out32(GEB8, basestride | ((ca->dy * info->var.xres_virtual *
-				   info->var.bits_per_pixel) >> 6));
-	out32(GEC8, basestride | ((ca->sy * info->var.xres_virtual *
-				   info->var.bits_per_pixel) >> 6));
-	out32(GE44, 0xa0000000 | 1 << 19 | 1 << 2 | direction);
-	out32(GE00, direction ? s2 : s1);
-	out32(GE04, direction ? s1 : s2);
-	out32(GE08, direction ? d2 : d1);
-	out32(GE0C, direction ? d1 : d2);
-}
-
-//=======================================================================
-//
-// Cyberblade specific imageblit
-//
-// Accelerated for the most usual case, blitting 1 - bit deep
-// character images. Everything else is passed to the generic imageblit
-// unless it is so insane that it is better to printk an alert.
-//
-// Hardware bug: _Never_ blit across pixel column 2048, that will lock
-// the system. We split those blit requests into three blitting
-// operations.
-//
-//=======================================================================
-
-static void cyblafb_imageblit(struct fb_info *info,
-			      const struct fb_image *image)
-{
-	u32 fgcol, bgcol;
-	u32 *pd = (u32 *) image->data;
-	u32 bpp = info->var.bits_per_pixel;
-
-	KD_GRAPHICS_RETURN();
-
-	// Used only for drawing the penguine (image->depth > 1)
-	if (image->depth != 1) {
-		cfb_imageblit(info, image);
-		return;
-	}
-	// That should never happen, but it would be fatal
-	if (image->width == 0 || image->height == 0) {
-		output("imageblit: width/height 0 detected\n");
-		return;
-	}
-
-	if (info->fix.visual == FB_VISUAL_TRUECOLOR ||
-	    info->fix.visual == FB_VISUAL_DIRECTCOLOR) {
-		fgcol = ((u32 *) (info->pseudo_palette))[image->fg_color];
-		bgcol = ((u32 *) (info->pseudo_palette))[image->bg_color];
-	} else {
-		fgcol = image->fg_color;
-		bgcol = image->bg_color;
-	}
-
-	switch (bpp) {
-	case 8:
-		fgcol |= fgcol << 8;
-		bgcol |= bgcol << 8;
-	case 16:
-		fgcol |= fgcol << 16;
-		bgcol |= bgcol << 16;
-	default:
-		break;
-	}
-
-	out32(GEB8, basestride | ((image->dy * info->var.xres_virtual *
-				   bpp) >> 6));
-	out32(GE60, fgcol);
-	out32(GE64, bgcol);
-
-	if (!(image->dx < 2048 && (image->dx + image->width - 1) >= 2048)) {
-		u32 dds = ((image->width + 31) >> 5) * image->height;
-		out32(GE44, 0xa0000000 | 1 << 20 | 1 << 19);
-		out32(GE08, point(image->dx, 0));
-		out32(GE0C, point(image->dx + image->width - 1,
-				  image->height - 1));
-		while (dds--)
-			out32(GE9C, *pd++);
-	} else {
-		int i, j;
-		u32 ddstotal = (image->width + 31) >> 5;
-		u32 ddsleft = (2048 - image->dx + 31) >> 5;
-		u32 skipleft = ddstotal - ddsleft;
-
-		out32(GE44, 0xa0000000 | 1 << 20 | 1 << 19);
-		out32(GE08, point(image->dx, 0));
-		out32(GE0C, point(2048 - 1, image->height - 1));
-		for (i = 0; i < image->height; i++) {
-			for (j = 0; j < ddsleft; j++)
-				out32(GE9C, *pd++);
-			pd += skipleft;
-		}
-
-		if (image->dx % 32) {
-			out32(GE44, 0xa0000000 | 1 << 20 | 1 << 19);
-			out32(GE08, point(2048, 0));
-			if (image->width > ddsleft << 5)
-				out32(GE0C, point(image->dx + (ddsleft << 5) -
-						  1, image->height - 1));
-			else
-				out32(GE0C, point(image->dx + image->width - 1,
-						  image->height - 1));
-			pd = ((u32 *) image->data) + ddstotal - skipleft - 1;
-			for (i = 0; i < image->height; i++) {
-				out32(GE9C, swab32(swab32(*pd) << ((32 -
-					    (image->dx & 31)) & 31)));
-				pd += ddstotal;
-			}
-		}
-
-		if (skipleft) {
-			out32(GE44, 0xa0000000 | 1 << 20 | 1 << 19);
-			out32(GE08, point(image->dx + (ddsleft << 5), 0));
-			out32(GE0C, point(image->dx + image->width - 1,
-					  image->height - 1));
-			pd = (u32 *) image->data;
-			for (i = 0; i < image->height; i++) {
-				pd += ddsleft;
-				for (j = 0; j < skipleft; j++)
-					out32(GE9C, *pd++);
-			}
-		}
-	}
-}
-
-//==========================================================
-//
-// Check if video mode is acceptable. We change var->??? if
-// video mode is slightly off or return error otherwise.
-// info->??? must not be changed!
-//
-//==========================================================
-
-static int cyblafb_check_var(struct fb_var_screeninfo *var,
-			     struct fb_info *info)
-{
-	int bpp = var->bits_per_pixel;
-
-	//
-	// we try to support 8, 16, 24 and 32 bpp modes,
-	// default to 8
-	//
-	// there is a 24 bpp mode, but for now we change requests to 32 bpp
-	// (This is what tridentfb does ... will be changed in the future)
-	//
-	//
-	if (bpp % 8 != 0 || bpp < 8 || bpp > 32)
-		bpp = 8;
-	if (bpp == 24)
-		bpp = var->bits_per_pixel = 32;
-
-	//
-	// interlaced modes are broken, fail if one is requested
-	//
-	if (var->vmode & FB_VMODE_INTERLACED)
-		return -EINVAL;
-
-	//
-	// fail if requested resolution is higher than physical
-	// flatpanel resolution
-	//
-	if ((displaytype == DISPLAY_FP) && nativex && var->xres > nativex)
-		return -EINVAL;
-
-	//
-	// we do not allow vclk to exceed 230 MHz. If the requested
-	// vclk is too high, we default to 200 MHz
-	//
-	if ((bpp == 32 ? 200000000 : 100000000) / var->pixclock > 23000)
-		var->pixclock = (bpp == 32 ? 200000000 : 100000000) / 20000;
-
-	//
-	// enforce (h|v)sync_len limits
-	//
-	var->hsync_len &= ~7;
-	if(var->hsync_len > 248)
-		var->hsync_len = 248;
-
-	var->vsync_len &= 15;
-
-	//
-	// Enforce horizontal and vertical hardware limits.
-	// 1600x1200 is mentioned as a maximum, but higher resolutions could
-	// work with slow refresh, small margins and short sync.
-	//
-	var->xres &= ~7;
-
-	if (((var->xres + var->left_margin + var->right_margin +
-			var->hsync_len) > (bpp == 32 ? 2040 : 4088)) ||
-			((var->yres + var->upper_margin + var->lower_margin +
-			var->vsync_len) > 2047))
-		return -EINVAL;
-
-	if ((var->xres > 1600) || (var->yres > 1200))
-		output("Mode %dx%d exceeds documented limits.\n",
-					   var->xres, var->yres);
-	//
-	// try to be smart about (x|y)res_virtual problems.
-	//
-	if (var->xres > var->xres_virtual)
-		var->xres_virtual = var->xres;
-	if (var->yres > var->yres_virtual)
-		var->yres_virtual = var->yres;
-
-	if (bpp == 8 || bpp == 16) {
-		if (var->xres_virtual > 4088)
-			var->xres_virtual = 4088;
-	} else {
-		if (var->xres_virtual > 2040)
-			var->xres_virtual = 2040;
-	}
-	var->xres_virtual &= ~7;
-	while (var->xres_virtual * var->yres_virtual * bpp / 8 >
-	       info->fix.smem_len) {
-		if (var->yres_virtual > var->yres)
-			var->yres_virtual--;
-		else if (var->xres_virtual > var->xres)
-			var->xres_virtual -= 8;
-		else
-			return -EINVAL;
-	}
-
-	switch (bpp) {
-	case 8:
-		var->red.offset = 0;
-		var->green.offset = 0;
-		var->blue.offset = 0;
-		var->red.length = 6;
-		var->green.length = 6;
-		var->blue.length = 6;
-		break;
-	case 16:
-		var->red.offset = 11;
-		var->green.offset = 5;
-		var->blue.offset = 0;
-		var->red.length = 5;
-		var->green.length = 6;
-		var->blue.length = 5;
-		break;
-	case 32:
-		var->red.offset = 16;
-		var->green.offset = 8;
-		var->blue.offset = 0;
-		var->red.length = 8;
-		var->green.length = 8;
-		var->blue.length = 8;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-//=====================================================================
-//
-// Pan the display
-//
-// The datasheets defines crt start address to be 20 bits wide and
-// to be programmed to CR0C, CR0D, CR1E and CR27. Actually there is
-// CR2B[5] as an undocumented extension bit. Epia BIOS 2.07 does use
-// it, so it is also safe to be used here. BTW: datasheet CR0E on page
-// 90 really is CR1E, the real CRE is documented on page 72.
-//
-// BUT:
-//
-// As of internal version 0.60 we do not use vga panning any longer.
-// Vga panning did not allow us the use of all available video memory
-// and thus prevented ywrap scrolling. We do use the "right view"
-// register now.
-//
-//
-//=====================================================================
-
-static int cyblafb_pan_display(struct fb_var_screeninfo *var,
-			       struct fb_info *info)
-{
-	KD_GRAPHICS_RETURN(0);
-
-	info->var.xoffset = var->xoffset;
-	info->var.yoffset = var->yoffset;
-	out32(GE10, 0x80000000 | ((var->xoffset + (var->yoffset *
-		    var->xres_virtual)) * var->bits_per_pixel / 32));
-	return 0;
-}
-
-//============================================
-//
-// This will really help in case of a bug ...
-// dump most gaphics core registers.
-//
-//============================================
-
-static void regdump(struct cyblafb_par *par)
-{
-	int i;
-
-	if (verbosity < 2)
-		return;
-
-	printk("\n");
-	for (i = 0; i <= 0xff; i++) {
-		outb(i, 0x3d4);
-		printk("CR%02x=%02x ", i, inb(0x3d5));
-		if (i % 16 == 15)
-			printk("\n");
-	}
-
-	outb(0x30, 0x3ce);
-	outb(inb(0x3cf) | 0x40, 0x3cf);
-	for (i = 0; i <= 0x1f; i++) {
-		if (i == 0 || (i > 2 && i < 8) || i == 0x10 || i == 0x11
-		    || i == 0x16) {
-			outb(i, 0x3d4);
-			printk("CR%02x=%02x ", i, inb(0x3d5));
-		} else
-			printk("------- ");
-		if (i % 16 == 15)
-			printk("\n");
-	}
-	outb(0x30, 0x3ce);
-	outb(inb(0x3cf) & 0xbf, 0x3cf);
-
-	printk("\n");
-	for (i = 0; i <= 0x7f; i++) {
-		outb(i, 0x3ce);
-		printk("GR%02x=%02x ", i, inb(0x3cf));
-		if (i % 16 == 15)
-			printk("\n");
-	}
-
-	printk("\n");
-	for (i = 0; i <= 0xff; i++) {
-		outb(i, 0x3c4);
-		printk("SR%02x=%02x ", i, inb(0x3c5));
-		if (i % 16 == 15)
-			printk("\n");
-	}
-
-	printk("\n");
-	for (i = 0; i <= 0x1F; i++) {
-		inb(0x3da);	// next access is index!
-		outb(i, 0x3c0);
-		printk("AR%02x=%02x ", i, inb(0x3c1));
-		if (i % 16 == 15)
-			printk("\n");
-	}
-	printk("\n");
-
-	inb(0x3DA);		// reset internal flag to 3c0 index
-	outb(0x20, 0x3C0);	// enable attr
-
-	return;
-}
-
-//=======================================================================
-//
-// Save State
-//
-// This function is called while a switch to KD_TEXT is in progress,
-// before any of the other functions are called.
-//
-//=======================================================================
-
-static void cyblafb_save_state(struct fb_info *info)
-{
-	struct cyblafb_par *par = info->par;
-	if (verbosity > 0)
-		output("Switching to KD_TEXT\n");
-	disabled = 0;
-	regdump(par);
-	enable_mmio();
-	return;
-}
-
-//=======================================================================
-//
-// Restore State
-//
-// This function is called while a switch to KD_GRAPHICS is in progress,
-// We have to turn on vga style panning registers again because the
-// trident driver of X does not know about GE10.
-//
-//=======================================================================
-
-static void cyblafb_restore_state(struct fb_info *info)
-{
-	if (verbosity > 0)
-		output("Switching to KD_GRAPHICS\n");
-	out32(GE10, 0);
-	disabled = 1;
-	return;
-}
-
-//======================================
-//
-// Set hardware to requested video mode
-//
-//======================================
-
-static int cyblafb_set_par(struct fb_info *info)
-{
-	struct cyblafb_par *par = info->par;
-	u32 htotal, hdispend, hsyncstart, hsyncend, hblankstart,
-	    hblankend, preendfetch, vtotal, vdispend, vsyncstart,
-	    vsyncend, vblankstart, vblankend;
-	struct fb_var_screeninfo *var = &info->var;
-	int bpp = var->bits_per_pixel;
-	int i;
-
-	KD_GRAPHICS_RETURN(0);
-
-	if (verbosity > 0)
-		output("Switching to new mode: "
-		       "fbset -g %d %d %d %d %d -t %d %d %d %d %d %d %d\n",
-		       var->xres, var->yres, var->xres_virtual,
-		       var->yres_virtual, var->bits_per_pixel, var->pixclock,
-		       var->left_margin, var->right_margin, var->upper_margin,
-		       var->lower_margin, var->hsync_len, var->vsync_len);
-
-	htotal = (var->xres + var->left_margin + var->right_margin +
-		  var->hsync_len) / 8 - 5;
-	hdispend = var->xres / 8 - 1;
-	hsyncstart = (var->xres + var->right_margin) / 8;
-	hsyncend = var->hsync_len / 8;
-	hblankstart = hdispend + 1;
-	hblankend = htotal + 3; // should be htotal + 5, bios does it this way
-	preendfetch = ((var->xres >> 3) + 1) * ((bpp + 1) >> 3);
-
-	vtotal = var->yres + var->upper_margin + var->lower_margin +
-							var->vsync_len - 2;
-	vdispend = var->yres - 1;
-	vsyncstart = var->yres + var->lower_margin;
-	vblankstart = var->yres;
-	vblankend = vtotal; // should be vtotal + 2, but bios does it this way
-	vsyncend = var->vsync_len;
-
-	enable_mmio();		// necessary! ... check X ...
-
-	write3X4(CR11, read3X4(CR11) & 0x7F);	// unlock cr00 .. cr07
-
-	write3CE(GR30, 8);
-
-	if ((displaytype == DISPLAY_FP) && var->xres < nativex) {
-
-		// stretch or center ?
-
-		out8(0x3C2, 0xEB);
-
-		write3CE(GR30, read3CE(GR30) | 0x81);	// shadow mode on
-
-		if (center) {
-			write3CE(GR52, (read3CE(GR52) & 0x7C) | 0x80);
-			write3CE(GR53, (read3CE(GR53) & 0x7C) | 0x80);
-		} else if (stretch) {
-			write3CE(GR5D, 0);
-			write3CE(GR52, (read3CE(GR52) & 0x7C) | 1);
-			write3CE(GR53, (read3CE(GR53) & 0x7C) | 1);
-		}
-
-	} else {
-		out8(0x3C2, 0x2B);
-		write3CE(GR30, 8);
-	}
-
-	//
-	// Setup CRxx regs
-	//
-
-	write3X4(CR00, htotal & 0xFF);
-	write3X4(CR01, hdispend & 0xFF);
-	write3X4(CR02, hblankstart & 0xFF);
-	write3X4(CR03, hblankend & 0x1F);
-	write3X4(CR04, hsyncstart & 0xFF);
-	write3X4(CR05, (hsyncend & 0x1F) | ((hblankend & 0x20) << 2));
-	write3X4(CR06, vtotal & 0xFF);
-	write3X4(CR07, (vtotal & 0x100) >> 8 |
-		       (vdispend & 0x100) >> 7 |
-		       (vsyncstart & 0x100) >> 6 |
-		       (vblankstart & 0x100) >> 5 |
-		       0x10 |
-		       (vtotal & 0x200) >> 4 |
-		       (vdispend & 0x200) >> 3 | (vsyncstart & 0x200) >> 2);
-	write3X4(CR08, 0);
-	write3X4(CR09, (vblankstart & 0x200) >> 4 | 0x40 |	// FIX !!!
-		       ((info->var.vmode & FB_VMODE_DOUBLE) ? 0x80 : 0));
-	write3X4(CR0A, 0);	// Init to some reasonable default
-	write3X4(CR0B, 0);	// Init to some reasonable default
-	write3X4(CR0C, 0);	// Offset 0
-	write3X4(CR0D, 0);	// Offset 0
-	write3X4(CR0E, 0);	// Init to some reasonable default
-	write3X4(CR0F, 0);	// Init to some reasonable default
-	write3X4(CR10, vsyncstart & 0xFF);
-	write3X4(CR11, (vsyncend & 0x0F));
-	write3X4(CR12, vdispend & 0xFF);
-	write3X4(CR13, ((info->var.xres_virtual * bpp) / (4 * 16)) & 0xFF);
-	write3X4(CR14, 0x40);	// double word mode
-	write3X4(CR15, vblankstart & 0xFF);
-	write3X4(CR16, vblankend & 0xFF);
-	write3X4(CR17, 0xE3);
-	write3X4(CR18, 0xFF);
-	//	 CR19: needed for interlaced modes ... ignore it for now
-	write3X4(CR1A, 0x07);	// Arbitration Control Counter 1
-	write3X4(CR1B, 0x07);	// Arbitration Control Counter 2
-	write3X4(CR1C, 0x07);	// Arbitration Control Counter 3
-	write3X4(CR1D, 0x00);	// Don't know, doesn't hurt ; -)
-	write3X4(CR1E, (info->var.vmode & FB_VMODE_INTERLACED) ? 0x84 : 0x80);
-	//	 CR1F: do not set, contains BIOS info about memsize
-	write3X4(CR20, 0x20);	// enabe wr buf, disable 16bit planar mode
-	write3X4(CR21, 0x20);	// enable linear memory access
-	//	 CR22: RO cpu latch readback
-	//	 CR23: ???
-	//	 CR24: RO AR flag state
-	//	 CR25: RAMDAC rw timing, pclk buffer tristate control ????
-	//	 CR26: ???
-	write3X4(CR27, (vdispend & 0x400) >> 6 |
-		       (vsyncstart & 0x400) >> 5 |
-		       (vblankstart & 0x400) >> 4 |
-		       (vtotal & 0x400) >> 3 |
-		       0x8);
-	//	 CR28: ???
-	write3X4(CR29, (read3X4(CR29) & 0xCF) | ((((info->var.xres_virtual *
-			bpp) / (4 * 16)) & 0x300) >> 4));
-	write3X4(CR2A, read3X4(CR2A) | 0x40);
-	write3X4(CR2B, (htotal & 0x100) >> 8 |
-		       (hdispend & 0x100) >> 7 |
-		       // (0x00 & 0x100) >> 6 |   hinterlace para bit 8 ???
-		       (hsyncstart & 0x100) >> 5 |
-		       (hblankstart & 0x100) >> 4);
-	//	 CR2C: ???
-	//	 CR2D: initialized in cyblafb_setup_GE()
-	write3X4(CR2F, 0x92);	// conservative, better signal quality
-	//	 CR30: reserved
-	//	 CR31: reserved
-	//	 CR32: reserved
-	//	 CR33: reserved
-	//	 CR34: disabled in CR36
-	//	 CR35: disabled in CR36
-	//	 CR36: initialized in cyblafb_setup_GE
-	//	 CR37: i2c, ignore for now
-	write3X4(CR38, (bpp == 8) ? 0x00 :	//
-		       (bpp == 16) ? 0x05 :	// highcolor
-		       (bpp == 24) ? 0x29 :	// packed 24bit truecolor
-		       (bpp == 32) ? 0x09 : 0); // truecolor, 16 bit pixelbus
-	write3X4(CR39, 0x01 |	// MMIO enable
-		       (pcirb ? 0x02 : 0) |	// pci read burst enable
-		       (pciwb ? 0x04 : 0));	// pci write burst enable
-	write3X4(CR55, 0x1F | // pci clocks * 2 for STOP# during 1st data phase
-		       (pcirr ? 0x40 : 0) |	// pci read retry enable
-		       (pciwr ? 0x80 : 0));	// pci write retry enable
-	write3X4(CR56, preendfetch >> 8 < 2 ? (preendfetch >> 8 & 0x01) | 2
-					    : 0);
-	write3X4(CR57, preendfetch >> 8 < 2 ? preendfetch & 0xff : 0);
-	write3X4(CR58, 0x82);	// Bios does this .... don't know more
-	//
-	// Setup SRxx regs
-	//
-	write3C4(SR00, 3);
-	write3C4(SR01, 1);	//set char clock 8 dots wide
-	write3C4(SR02, 0x0F);	//enable 4 maps needed in chain4 mode
-	write3C4(SR03, 0);	//no character map select
-	write3C4(SR04, 0x0E);	//memory mode: ext mem, even, chain4
-
-	out8(0x3C4, 0x0b);
-	in8(0x3C5);		// Set NEW mode
-	write3C4(SR0D, 0x00);	// test ... check
-
-	set_vclk(par, (bpp == 32 ? 200000000 : 100000000)
-					/ info->var.pixclock);	//SR18, SR19
-
-	//
-	// Setup GRxx regs
-	//
-	write3CE(GR00, 0x00);	// test ... check
-	write3CE(GR01, 0x00);	// test ... check
-	write3CE(GR02, 0x00);	// test ... check
-	write3CE(GR03, 0x00);	// test ... check
-	write3CE(GR04, 0x00);	// test ... check
-	write3CE(GR05, 0x40);	// no CGA compat, allow 256 col
-	write3CE(GR06, 0x05);	// graphics mode
-	write3CE(GR07, 0x0F);	// planes?
-	write3CE(GR08, 0xFF);	// test ... check
-	write3CE(GR0F, (bpp == 32) ? 0x1A : 0x12); // vclk / 2 if 32bpp, chain4
-	write3CE(GR20, 0xC0);	// test ... check
-	write3CE(GR2F, 0xA0);	// PCLK = VCLK, no skew,
-
-	//
-	// Setup ARxx regs
-	//
-	for (i = 0; i < 0x10; i++)	// set AR00 .. AR0f
-		write3C0(i, i);
-	write3C0(AR10, 0x41);	// graphics mode and support 256 color modes
-	write3C0(AR12, 0x0F);	// planes
-	write3C0(AR13, 0);	// horizontal pel panning
-	in8(0x3DA);		// reset internal flag to 3c0 index
-	out8(0x3C0, 0x20);	// enable attr
-
-	//
-	// Setup hidden RAMDAC command register
-	//
-	in8(0x3C8);		// these reads are
-	in8(0x3C6);		// necessary to
-	in8(0x3C6);		// unmask the RAMDAC
-	in8(0x3C6);		// command reg, otherwise
-	in8(0x3C6);		// we would write the pixelmask reg!
-	out8(0x3C6, (bpp == 8) ? 0x00 : // 256 colors
-	     (bpp == 15) ? 0x10 :	//
-	     (bpp == 16) ? 0x30 :	// hicolor
-	     (bpp == 24) ? 0xD0 :	// truecolor
-	     (bpp == 32) ? 0xD0 : 0);	// truecolor
-	in8(0x3C8);
-
-	//
-	// GR31 is not mentioned in the datasheet
-	//
-	if (displaytype == DISPLAY_FP)
-		write3CE(GR31, (read3CE(GR31) & 0x8F) |
-			 ((info->var.yres > 1024) ? 0x50 :
-			  (info->var.yres > 768) ? 0x30 :
-			  (info->var.yres > 600) ? 0x20 :
-			  (info->var.yres > 480) ? 0x10 : 0));
-
-	info->fix.visual = (bpp == 8) ? FB_VISUAL_PSEUDOCOLOR
-				      : FB_VISUAL_TRUECOLOR;
-	info->fix.line_length = info->var.xres_virtual * (bpp >> 3);
-	info->cmap.len = (bpp == 8) ? 256 : 16;
-
-	//
-	// init acceleration engine
-	//
-	cyblafb_setup_GE(info->var.xres_virtual, info->var.bits_per_pixel);
-
-	//
-	// Set/clear flags to allow proper scroll mode selection.
-	//
-	if (var->xres == var->xres_virtual)
-		info->flags &= ~FBINFO_HWACCEL_XPAN;
-	else
-		info->flags |= FBINFO_HWACCEL_XPAN;
-
-	if (var->yres == var->yres_virtual)
-		info->flags &= ~FBINFO_HWACCEL_YPAN;
-	else
-		info->flags |= FBINFO_HWACCEL_YPAN;
-
-	if (info->fix.smem_len !=
-	    var->xres_virtual * var->yres_virtual * bpp / 8)
-		info->flags &= ~FBINFO_HWACCEL_YWRAP;
-	else
-		info->flags |= FBINFO_HWACCEL_YWRAP;
-
-	regdump(par);
-
-	return 0;
-}
-
-//========================
-//
-// Set one color register
-//
-//========================
-
-static int cyblafb_setcolreg(unsigned regno, unsigned red, unsigned green,
-			     unsigned blue, unsigned transp,
-			     struct fb_info *info)
-{
-	int bpp = info->var.bits_per_pixel;
-
-	KD_GRAPHICS_RETURN(0);
-
-	if (regno >= info->cmap.len)
-		return 1;
-
-	if (bpp == 8) {
-		out8(0x3C6, 0xFF);
-		out8(0x3C8, regno);
-		out8(0x3C9, red >> 10);
-		out8(0x3C9, green >> 10);
-		out8(0x3C9, blue >> 10);
-
-	} else if (regno < 16) {
-		if (bpp == 16)	// RGB 565
-			((u32 *) info->pseudo_palette)[regno] =
-				(red & 0xF800) |
-				((green & 0xFC00) >> 5) |
-				((blue & 0xF800) >> 11);
-		else if (bpp == 32)	// ARGB 8888
-			((u32 *) info->pseudo_palette)[regno] =
-				((transp & 0xFF00) << 16) |
-				((red & 0xFF00) << 8) |
-				((green & 0xFF00)) | ((blue & 0xFF00) >> 8);
-	}
-
-	return 0;
-}
-
-//==========================================================
-//
-// Try blanking the screen. For flat panels it does nothing
-//
-//==========================================================
-
-static int cyblafb_blank(int blank_mode, struct fb_info *info)
-{
-	unsigned char PMCont, DPMSCont;
-
-	KD_GRAPHICS_RETURN(0);
-
-	if (displaytype == DISPLAY_FP)
-		return 0;
-
-	out8(0x83C8, 0x04);	// DPMS Control
-	PMCont = in8(0x83C6) & 0xFC;
-
-	DPMSCont = read3CE(GR23) & 0xFC;
-
-	switch (blank_mode) {
-	case FB_BLANK_UNBLANK:	// Screen: On, HSync: On, VSync: On
-	case FB_BLANK_NORMAL:	// Screen: Off, HSync: On, VSync: On
-		PMCont |= 0x03;
-		DPMSCont |= 0x00;
-		break;
-	case FB_BLANK_HSYNC_SUSPEND:	// Screen: Off, HSync: Off, VSync: On
-		PMCont |= 0x02;
-		DPMSCont |= 0x01;
-		break;
-	case FB_BLANK_VSYNC_SUSPEND:	// Screen: Off, HSync: On, VSync: Off
-		PMCont |= 0x02;
-		DPMSCont |= 0x02;
-		break;
-	case FB_BLANK_POWERDOWN:	// Screen: Off, HSync: Off, VSync: Off
-		PMCont |= 0x00;
-		DPMSCont |= 0x03;
-		break;
-	}
-
-	write3CE(GR23, DPMSCont);
-	out8(0x83C8, 4);
-	out8(0x83C6, PMCont);
-	//
-	// let fbcon do a softblank for us
-	//
-	return (blank_mode == FB_BLANK_NORMAL) ? 1 : 0;
-}
-
-static struct fb_ops cyblafb_ops __devinitdata = {
-	.owner = THIS_MODULE,
-	.fb_setcolreg = cyblafb_setcolreg,
-	.fb_pan_display = cyblafb_pan_display,
-	.fb_blank = cyblafb_blank,
-	.fb_check_var = cyblafb_check_var,
-	.fb_set_par = cyblafb_set_par,
-	.fb_fillrect = cyblafb_fillrect,
-	.fb_copyarea = cyblafb_copyarea,
-	.fb_imageblit = cyblafb_imageblit,
-	.fb_sync = cyblafb_sync,
-	.fb_restore_state = cyblafb_restore_state,
-	.fb_save_state = cyblafb_save_state,
-};
-
-//==========================================================================
-//
-// getstartupmode() decides about the inital video mode
-//
-// There is no reason to use modedb, a lot of video modes there would
-// need altered timings to display correctly. So I decided that it is much
-// better to provide a limited optimized set of modes plus the option of
-// using the mode in effect at startup time (might be selected using the
-// vga=??? parameter). After that the user might use fbset to select any
-// mode he likes, check_var will not try to alter geometry parameters as
-// it would be necessary otherwise.
-//
-//==========================================================================
-
-static int __devinit getstartupmode(struct fb_info *info)
-{
-	u32 htotal, hdispend, hsyncstart, hsyncend, hblankstart, hblankend,
-	    vtotal, vdispend, vsyncstart, vsyncend, vblankstart, vblankend,
-	    cr00, cr01, cr02, cr03, cr04, cr05, cr2b,
-	    cr06, cr07, cr09, cr10, cr11, cr12, cr15, cr16, cr27,
-	    cr38, sr0d, sr18, sr19, gr0f, fi, pxclkdiv, vclkdiv, tmp, i;
-
-	struct modus {
-		int xres; int vxres; int yres; int vyres;
-		int bpp; int pxclk;
-		int left_margin; int right_margin;
-		int upper_margin; int lower_margin;
-		int hsync_len; int vsync_len;
-	} modedb[5] = {
-		{
-		0, 2048, 0, 4096, 0, 0, 0, 0, 0, 0, 0, 0}, {
-		640, 2048, 480, 4096, 0, 0, -40, 24, 17, 0, 216, 3}, {
-		800, 2048, 600, 4096, 0, 0, 96, 24, 14, 0, 136, 11}, {
-		1024, 2048, 768, 4096, 0, 0, 144, 24, 29, 0, 120, 3}, {
-		1280, 2048, 1024, 4096, 0, 0, 232, 16, 39, 0, 160, 3}
-	};
-
-	outb(0x00, 0x3d4); cr00 = inb(0x3d5);
-	outb(0x01, 0x3d4); cr01 = inb(0x3d5);
-	outb(0x02, 0x3d4); cr02 = inb(0x3d5);
-	outb(0x03, 0x3d4); cr03 = inb(0x3d5);
-	outb(0x04, 0x3d4); cr04 = inb(0x3d5);
-	outb(0x05, 0x3d4); cr05 = inb(0x3d5);
-	outb(0x06, 0x3d4); cr06 = inb(0x3d5);
-	outb(0x07, 0x3d4); cr07 = inb(0x3d5);
-	outb(0x09, 0x3d4); cr09 = inb(0x3d5);
-	outb(0x10, 0x3d4); cr10 = inb(0x3d5);
-	outb(0x11, 0x3d4); cr11 = inb(0x3d5);
-	outb(0x12, 0x3d4); cr12 = inb(0x3d5);
-	outb(0x15, 0x3d4); cr15 = inb(0x3d5);
-	outb(0x16, 0x3d4); cr16 = inb(0x3d5);
-	outb(0x27, 0x3d4); cr27 = inb(0x3d5);
-	outb(0x2b, 0x3d4); cr2b = inb(0x3d5);
-	outb(0x38, 0x3d4); cr38 = inb(0x3d5);
-
-	outb(0x0b, 0x3c4);
-	inb(0x3c5);
-
-	outb(0x0d, 0x3c4); sr0d = inb(0x3c5);
-	outb(0x18, 0x3c4); sr18 = inb(0x3c5);
-	outb(0x19, 0x3c4); sr19 = inb(0x3c5);
-	outb(0x0f, 0x3ce); gr0f = inb(0x3cf);
-
-	htotal = cr00 | (cr2b & 0x01) << 8;
-	hdispend = cr01 | (cr2b & 0x02) << 7;
-	hblankstart = cr02 | (cr2b & 0x10) << 4;
-	hblankend = (cr03 & 0x1f) | (cr05 & 0x80) >> 2;
-	hsyncstart = cr04 | (cr2b & 0x08) << 5;
-	hsyncend = cr05 & 0x1f;
-
-	modedb[0].xres = hblankstart * 8;
-	modedb[0].hsync_len = hsyncend * 8;
-	modedb[0].right_margin = hsyncstart * 8 - modedb[0].xres;
-	modedb[0].left_margin = (htotal + 5) * 8 - modedb[0].xres -
-	    modedb[0].right_margin - modedb[0].hsync_len;
-
-	vtotal = cr06 | (cr07 & 0x01) << 8 | (cr07 & 0x20) << 4
-	    | (cr27 & 0x80) << 3;
-	vdispend = cr12 | (cr07 & 0x02) << 7 | (cr07 & 0x40) << 3
-	    | (cr27 & 0x10) << 6;
-	vsyncstart = cr10 | (cr07 & 0x04) << 6 | (cr07 & 0x80) << 2
-	    | (cr27 & 0x20) << 5;
-	vsyncend = cr11 & 0x0f;
-	vblankstart = cr15 | (cr07 & 0x08) << 5 | (cr09 & 0x20) << 4
-	    | (cr27 & 0x40) << 4;
-	vblankend = cr16;
-
-	modedb[0].yres = vdispend + 1;
-	modedb[0].vsync_len = vsyncend;
-	modedb[0].lower_margin = vsyncstart - modedb[0].yres;
-	modedb[0].upper_margin = vtotal - modedb[0].yres -
-	    modedb[0].lower_margin - modedb[0].vsync_len + 2;
-
-	tmp = cr38 & 0x3c;
-	modedb[0].bpp = tmp == 0 ? 8 : tmp == 4 ? 16 : tmp == 28 ? 24 :
-	    tmp == 8 ? 32 : 8;
-
-	fi = ((5864727 * (sr18 + 8)) /
-	      (((sr19 & 0x3f) + 2) * (1 << ((sr19 & 0xc0) >> 6)))) >> 12;
-	pxclkdiv = ((gr0f & 0x08) >> 3 | (gr0f & 0x40) >> 5) + 1;
-	tmp = sr0d & 0x06;
-	vclkdiv = tmp == 0 ? 2 : tmp == 2 ? 4 : tmp == 4 ? 8 : 3; // * 2 !
-	modedb[0].pxclk = ((100000000 * pxclkdiv * vclkdiv) >> 1) / fi;
-
-	if (verbosity > 0)
-		output("detected startup mode: "
-		       "fbset -g %d %d %d ??? %d -t %d %d %d %d %d %d %d\n",
-		       modedb[0].xres, modedb[0].yres, modedb[0].xres,
-		       modedb[0].bpp, modedb[0].pxclk, modedb[0].left_margin,
-		       modedb[0].right_margin, modedb[0].upper_margin,
-		       modedb[0].lower_margin, modedb[0].hsync_len,
-		       modedb[0].vsync_len);
-
-	//
-	// We use this goto target in case of a failed check_var. No, I really
-	// do not want to do it in another way!
-	//
-
-      tryagain:
-
-	i = (mode == NULL) ? 0 :
-	    !strncmp(mode, "640x480", 7) ? 1 :
-	    !strncmp(mode, "800x600", 7) ? 2 :
-	    !strncmp(mode, "1024x768", 8) ? 3 :
-	    !strncmp(mode, "1280x1024", 9) ? 4 : 0;
-
-	ref = (ref < 50) ? 50 : (ref > 85) ? 85 : ref;
-
-	if (i == 0) {
-		info->var.pixclock = modedb[i].pxclk;
-		info->var.bits_per_pixel = modedb[i].bpp;
-	} else {
-		info->var.pixclock = (100000000 /
-				      ((modedb[i].left_margin +
-					modedb[i].xres +
-					modedb[i].right_margin +
-					modedb[i].hsync_len) *
-				       (modedb[i].upper_margin +
-					modedb[i].yres +
-					modedb[i].lower_margin +
-					modedb[i].vsync_len) * ref / 10000));
-		info->var.bits_per_pixel = bpp;
-	}
-
-	info->var.left_margin = modedb[i].left_margin;
-	info->var.right_margin = modedb[i].right_margin;
-	info->var.xres = modedb[i].xres;
-	if (!(modedb[i].yres == 1280 && modedb[i].bpp == 32))
-		info->var.xres_virtual = modedb[i].vxres;
-	else
-		info->var.xres_virtual = modedb[i].xres;
-	info->var.xoffset = 0;
-	info->var.hsync_len = modedb[i].hsync_len;
-	info->var.upper_margin = modedb[i].upper_margin;
-	info->var.yres = modedb[i].yres;
-	info->var.yres_virtual = modedb[i].vyres;
-	info->var.yoffset = 0;
-	info->var.lower_margin = modedb[i].lower_margin;
-	info->var.vsync_len = modedb[i].vsync_len;
-	info->var.sync = 0;
-	info->var.vmode = FB_VMODE_NONINTERLACED;
-
-	if (cyblafb_check_var(&info->var, info)) {
-		// 640x480 - 8@75 should really never fail. One case would
-		// be fp == 1 and nativex < 640 ... give up then
-		if (i == 1 && bpp == 8 && ref == 75) {
-			output("Can't find a valid mode :-(\n");
-			return -EINVAL;
-		}
-		// Our detected mode is unlikely to fail. If it does,
-		// try 640x480 - 8@75 ...
-		if (i == 0) {
-			mode = "640x480";
-			bpp = 8;
-			ref = 75;
-			output("Detected mode failed check_var! "
-			       "Trying 640x480 - 8@75\n");
-			goto tryagain;
-		}
-		// A specified video mode failed for some reason.
-		// Try the startup mode first
-		output("Specified mode '%s' failed check! "
-		       "Falling back to startup mode.\n", mode);
-		mode = NULL;
-		goto tryagain;
-	}
-
-	return 0;
-}
-
-//========================================================
-//
-// Detect activated memory size. Undefined values require
-// memsize parameter.
-//
-//========================================================
-
-static unsigned int __devinit get_memsize(void)
-{
-	unsigned char tmp;
-	unsigned int k;
-
-	if (memsize)
-		k = memsize * Kb;
-	else {
-		tmp = read3X4(CR1F) & 0x0F;
-		switch (tmp) {
-		case 0x03:
-			k = 1 * 1024 * 1024;
-			break;
-		case 0x07:
-			k = 2 * 1024 * 1024;
-			break;
-		case 0x0F:
-			k = 4 * 1024 * 1024;
-			break;
-		case 0x04:
-			k = 8 * 1024 * 1024;
-			break;
-		default:
-			k = 1 * 1024 * 1024;
-			output("Unknown memory size code %x in CR1F."
-			       " We default to 1 Mb for now, please"
-			       " do provide a memsize parameter!\n", tmp);
-		}
-	}
-
-	if (verbosity > 0)
-		output("framebuffer size = %d Kb\n", k / Kb);
-	return k;
-}
-
-//=========================================================
-//
-// Detect if a flat panel monitor connected to the special
-// interface is active. Override is possible by fp and crt
-// parameters.
-//
-//=========================================================
-
-static unsigned int __devinit get_displaytype(void)
-{
-	if (fp)
-		return DISPLAY_FP;
-	if (crt)
-		return DISPLAY_CRT;
-	return (read3CE(GR33) & 0x10) ? DISPLAY_FP : DISPLAY_CRT;
-}
-
-//=====================================
-//
-// Get native resolution of flat panel
-//
-//=====================================
-
-static int __devinit get_nativex(void)
-{
-	int x, y, tmp;
-
-	if (nativex)
-		return nativex;
-
-	tmp = (read3CE(GR52) >> 4) & 3;
-
-	switch (tmp) {
-	case 0: x = 1280; y = 1024;
-		break;
-	case 2: x = 1024; y = 768;
-		break;
-	case 3: x = 800;  y = 600;
-		break;
-	case 4: x = 1400; y = 1050;
-		break;
-	case 1:
-	default:
-		x = 640; y = 480;
-		break;
-	}
-
-	if (verbosity > 0)
-		output("%dx%d flat panel found\n", x, y);
-	return x;
-}
-
-static int __devinit cybla_pci_probe(struct pci_dev *dev,
-				     const struct pci_device_id *id)
-{
-	struct fb_info *info;
-	struct cyblafb_par *par;
-
-	info = framebuffer_alloc(sizeof(struct cyblafb_par), &dev->dev);
-	if (!info)
-		goto errout_alloc_info;
-
-	info->pixmap.addr = kzalloc(CYBLAFB_PIXMAPSIZE, GFP_KERNEL);
-	if (!info->pixmap.addr) {
-		output("allocation of pixmap buffer failed!\n");
-		goto errout_alloc_pixmap;
-	}
-	info->pixmap.size = CYBLAFB_PIXMAPSIZE - 4;
-	info->pixmap.buf_align = 4;
-	info->pixmap.access_align = 32;
-	info->pixmap.flags = FB_PIXMAP_SYSTEM;
-	info->pixmap.scan_align = 4;
-
-	par = info->par;
-	par->ops = cyblafb_ops;
-
-	info->fix = cyblafb_fix;
-	info->fbops = &par->ops;
-	info->fix = cyblafb_fix;
-
-	if (pci_enable_device(dev)) {
-		output("could not enable device!\n");
-		goto errout_enable;
-	}
-	// might already be requested by vga console or vesafb,
-	// so we do care about success
-	if (!request_region(0x3c0, 0x20, "cyblafb")) {
-		output("region 0x3c0/0x20 already reserved\n");
-		vesafb |= 1;
-
-	}
-	//
-	// Graphics Engine Registers
-	//
-	if (!request_region(GEBase, 0x100, "cyblafb")) {
-		output("region %#x/0x100 already reserved\n", GEBase);
-		vesafb |= 2;
-	}
-
-	regdump(par);
-
-	enable_mmio();
-
-	// setup MMIO region
-	info->fix.mmio_start = pci_resource_start(dev, 1);
-	info->fix.mmio_len = 0x20000;
-
-	if (!request_mem_region(info->fix.mmio_start,
-				info->fix.mmio_len, "cyblafb")) {
-		output("request_mem_region failed for mmio region!\n");
-		goto errout_mmio_reqmem;
-	}
-
-	io_virt = ioremap_nocache(info->fix.mmio_start, info->fix.mmio_len);
-
-	if (!io_virt) {
-		output("ioremap failed for mmio region\n");
-		goto errout_mmio_remap;
-	}
-	// setup framebuffer memory ... might already be requested
-	// by vesafb. Not to fail in case of an unsuccessful request
-	// is useful if both are loaded.
-	info->fix.smem_start = pci_resource_start(dev, 0);
-	info->fix.smem_len = get_memsize();
-
-	if (!request_mem_region(info->fix.smem_start,
-				info->fix.smem_len, "cyblafb")) {
-		output("region %#lx/%#x already reserved\n",
-		       info->fix.smem_start, info->fix.smem_len);
-		vesafb |= 4;
-	}
-
-	info->screen_base = ioremap_nocache(info->fix.smem_start,
-					    info->fix.smem_len);
-
-	if (!info->screen_base) {
-		output("ioremap failed for smem region\n");
-		goto errout_smem_remap;
-	}
-
-	displaytype = get_displaytype();
-
-	if (displaytype == DISPLAY_FP)
-		nativex = get_nativex();
-
-	info->flags = FBINFO_DEFAULT
-		    | FBINFO_HWACCEL_COPYAREA
-		    | FBINFO_HWACCEL_FILLRECT
-		    | FBINFO_HWACCEL_IMAGEBLIT
-		    | FBINFO_READS_FAST
-//		    | FBINFO_PARTIAL_PAN_OK
-		    | FBINFO_MISC_ALWAYS_SETPAR;
-
-	info->pseudo_palette = par->pseudo_pal;
-
-	if (getstartupmode(info))
-		goto errout_findmode;
-
-	fb_alloc_cmap(&info->cmap, 256, 0);
-
-	if (register_framebuffer(info)) {
-		output("Could not register CyBla framebuffer\n");
-		goto errout_register;
-	}
-
-	pci_set_drvdata(dev, info);
-
-	//
-	// normal exit and error paths
-	//
-
-	return 0;
-
-      errout_register:
-      errout_findmode:
-	iounmap(info->screen_base);
-      errout_smem_remap:
-	if (!(vesafb & 4))
-		release_mem_region(info->fix.smem_start, info->fix.smem_len);
-	iounmap(io_virt);
-      errout_mmio_remap:
-	release_mem_region(info->fix.mmio_start, info->fix.mmio_len);
-      errout_mmio_reqmem:
-	if (!(vesafb & 1))
-		release_region(0x3c0, 32);
-      errout_enable:
-	kfree(info->pixmap.addr);
-      errout_alloc_pixmap:
-	framebuffer_release(info);
-      errout_alloc_info:
-	output("CyblaFB version %s aborting init.\n", VERSION);
-	return -ENODEV;
-}
-
-static void __devexit cybla_pci_remove(struct pci_dev *dev)
-{
-	struct fb_info *info = pci_get_drvdata(dev);
-
-	unregister_framebuffer(info);
-	iounmap(io_virt);
-	iounmap(info->screen_base);
-	if (!(vesafb & 4))
-		release_mem_region(info->fix.smem_start, info->fix.smem_len);
-	release_mem_region(info->fix.mmio_start, info->fix.mmio_len);
-	fb_dealloc_cmap(&info->cmap);
-	if (!(vesafb & 2))
-		release_region(GEBase, 0x100);
-	if (!(vesafb & 1))
-		release_region(0x3c0, 32);
-	kfree(info->pixmap.addr);
-	framebuffer_release(info);
-	output("CyblaFB version %s normal exit.\n", VERSION);
-}
-
-//
-// List of boards that we are trying to support
-//
-static struct pci_device_id cybla_devices[] = {
-	{PCI_VENDOR_ID_TRIDENT, CYBERBLADEi1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
-	{0,}
-};
-
-MODULE_DEVICE_TABLE(pci, cybla_devices);
-
-static struct pci_driver cyblafb_pci_driver = {
-	.name = "cyblafb",
-	.id_table = cybla_devices,
-	.probe = cybla_pci_probe,
-	.remove = __devexit_p(cybla_pci_remove)
-};
-
-//=============================================================
-//
-// kernel command line example:
-//
-//	video=cyblafb:1280x1024, bpp=16, ref=50 ...
-//
-// modprobe command line example:
-//
-//	modprobe cyblafb mode=1280x1024 bpp=16 ref=50 ...
-//
-//=============================================================
-
-static int __devinit cyblafb_init(void)
-{
-#ifndef MODULE
-	char *options = NULL;
-	char *opt;
-
-	if (fb_get_options("cyblafb", &options))
-		return -ENODEV;
-
-	if (options && *options)
-		while ((opt = strsep(&options, ",")) != NULL) {
-			if (!*opt)
-				continue;
-			else if (!strncmp(opt, "bpp=", 4))
-				bpp = simple_strtoul(opt + 4, NULL, 0);
-			else if (!strncmp(opt, "ref=", 4))
-				ref = simple_strtoul(opt + 4, NULL, 0);
-			else if (!strncmp(opt, "fp", 2))
-				displaytype = DISPLAY_FP;
-			else if (!strncmp(opt, "crt", 3))
-				displaytype = DISPLAY_CRT;
-			else if (!strncmp(opt, "nativex=", 8))
-				nativex = simple_strtoul(opt + 8, NULL, 0);
-			else if (!strncmp(opt, "center", 6))
-				center = 1;
-			else if (!strncmp(opt, "stretch", 7))
-				stretch = 1;
-			else if (!strncmp(opt, "pciwb=", 6))
-				pciwb = simple_strtoul(opt + 6, NULL, 0);
-			else if (!strncmp(opt, "pcirb=", 6))
-				pcirb = simple_strtoul(opt + 6, NULL, 0);
-			else if (!strncmp(opt, "pciwr=", 6))
-				pciwr = simple_strtoul(opt + 6, NULL, 0);
-			else if (!strncmp(opt, "pcirr=", 6))
-				pcirr = simple_strtoul(opt + 6, NULL, 0);
-			else if (!strncmp(opt, "memsize=", 8))
-				memsize = simple_strtoul(opt + 8, NULL, 0);
-			else if (!strncmp(opt, "verbosity=", 10))
-				verbosity = simple_strtoul(opt + 10, NULL, 0);
-			else
-				mode = opt;
-		}
-#endif
-	output("CyblaFB version %s initializing\n", VERSION);
-	return pci_register_driver(&cyblafb_pci_driver);
-}
-
-static void __exit cyblafb_exit(void)
-{
-	pci_unregister_driver(&cyblafb_pci_driver);
-}
-
-module_init(cyblafb_init);
-module_exit(cyblafb_exit);
-
-MODULE_AUTHOR("Knut Petersen <knut_petersen@t-online.de>");
-MODULE_DESCRIPTION("Framebuffer driver for Cyberblade/i1 graphics core");
-MODULE_LICENSE("GPL");

drivers/video/tridentfb.c

@@ -2,7 +2,7 @@
  * Frame buffer driver for Trident TGUI, Blade and Image series
  *
  * Copyright 2001, 2002 - Jani Monoses   <jani@iv.ro>
- *
+ * Copyright 2009 Krzysztof Helt <krzysztof.h1@wp.pl>
  *
  * CREDITS:(in order of appearance)
  *	skeletonfb.c by Geert Uytterhoeven and other fb code in drivers/video
@@ -1490,6 +1490,9 @@ static int __devinit trident_pci_probe(struct pci_dev *dev,
 	} else
 		info->flags |= FBINFO_HWACCEL_DISABLED;
 
+	if (is_blade(chip_id) && chip_id != BLADE3D)
+		info->flags |= FBINFO_READS_FAST;
+
 	info->pixmap.addr = kmalloc(4096, GFP_KERNEL);
 	if (!info->pixmap.addr) {
 		err = -ENOMEM;
@@ -1664,4 +1667,5 @@ module_exit(tridentfb_exit);
 MODULE_AUTHOR("Jani Monoses <jani@iv.ro>");
 MODULE_DESCRIPTION("Framebuffer driver for Trident cards");
 MODULE_LICENSE("GPL");
+MODULE_ALIAS("cyblafb");