Merge git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86

* git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86: (890 commits)
  x86: fix nodemap_size according to nodeid bits
  x86: fix overlap between pagetable with bss section
  x86: add PCI IDs to k8topology_64.c
  x86: fix early_ioremap pagetable ops
  x86: use the same pgd_list for PAE and 64-bit
  x86: defer cr3 reload when doing pud_clear()
  x86: early boot debugging via FireWire (ohci1394_dma=early)
  x86: don't special-case pmd allocations as much
  x86: shrink some ifdefs in fault.c
  x86: ignore spurious faults
  x86: remove nx_enabled from fault.c
  x86: unify fault_32|64.c
  x86: unify fault_32|64.c with ifdefs
  x86: unify fault_32|64.c by ifdef'd function bodies
  x86: arch/x86/mm/init_32.c printk fixes
  x86: arch/x86/mm/init_32.c cleanup
  x86: arch/x86/mm/init_64.c printk fixes
  x86: unify ioremap
  x86: fixes some bugs about EFI memory map handling
  x86: use reboot_type on EFI 32
  ...

Documentation/debugging-via-ohci1394.txt

@@ -0,0 +1,179 @@
+
+  Using physical DMA provided by OHCI-1394 FireWire controllers for debugging
+  ---------------------------------------------------------------------------
+
+Introduction
+------------
+
+Basically all FireWire controllers which are in use today are compliant
+to the OHCI-1394 specification which defines the controller to be a PCI
+bus master which uses DMA to offload data transfers from the CPU and has
+a "Physical Response Unit" which executes specific requests by employing
+PCI-Bus master DMA after applying filters defined by the OHCI-1394 driver.
+
+Once properly configured, remote machines can send these requests to
+ask the OHCI-1394 controller to perform read and write requests on
+physical system memory and, for read requests, send the result of
+the physical memory read back to the requester.
+
+With that, it is possible to debug issues by reading interesting memory
+locations such as buffers like the printk buffer or the process table.
+
+Retrieving a full system memory dump is also possible over the FireWire,
+using data transfer rates in the order of 10MB/s or more.
+
+Memory access is currently limited to the low 4G of physical address
+space which can be a problem on IA64 machines where memory is located
+mostly above that limit, but it is rarely a problem on more common
+hardware such as hardware based on x86, x86-64 and PowerPC.
+
+Together with a early initialization of the OHCI-1394 controller for debugging,
+this facility proved most useful for examining long debugs logs in the printk
+buffer on to debug early boot problems in areas like ACPI where the system
+fails to boot and other means for debugging (serial port) are either not
+available (notebooks) or too slow for extensive debug information (like ACPI).
+
+Drivers
+-------
+
+The OHCI-1394 drivers in drivers/firewire and drivers/ieee1394 initialize
+the OHCI-1394 controllers to a working state and can be used to enable
+physical DMA. By default you only have to load the driver, and physical
+DMA access will be granted to all remote nodes, but it can be turned off
+when using the ohci1394 driver.
+
+Because these drivers depend on the PCI enumeration to be completed, an
+initialization routine which can runs pretty early (long before console_init(),
+which makes the printk buffer appear on the console can be called) was written.
+
+To activate it, enable CONFIG_PROVIDE_OHCI1394_DMA_INIT (Kernel hacking menu:
+Provide code for enabling DMA over FireWire early on boot) and pass the
+parameter "ohci1394_dma=early" to the recompiled kernel on boot.
+
+Tools
+-----
+
+firescope - Originally developed by Benjamin Herrenschmidt, Andi Kleen ported
+it from PowerPC to x86 and x86_64 and added functionality, firescope can now
+be used to view the printk buffer of a remote machine, even with live update.
+
+Bernhard Kaindl enhanced firescope to support accessing 64-bit machines
+from 32-bit firescope and vice versa:
+- ftp://ftp.suse.de/private/bk/firewire/tools/firescope-0.2.2.tar.bz2
+
+and he implemented fast system dump (alpha version - read README.txt):
+- ftp://ftp.suse.de/private/bk/firewire/tools/firedump-0.1.tar.bz2
+
+There is also a gdb proxy for firewire which allows to use gdb to access
+data which can be referenced from symbols found by gdb in vmlinux:
+- ftp://ftp.suse.de/private/bk/firewire/tools/fireproxy-0.33.tar.bz2
+
+The latest version of this gdb proxy (fireproxy-0.34) can communicate (not
+yet stable) with kgdb over an memory-based communication module (kgdbom).
+
+Getting Started
+---------------
+
+The OHCI-1394 specification regulates that the OHCI-1394 controller must
+disable all physical DMA on each bus reset.
+
+This means that if you want to debug an issue in a system state where
+interrupts are disabled and where no polling of the OHCI-1394 controller
+for bus resets takes place, you have to establish any FireWire cable
+connections and fully initialize all FireWire hardware __before__ the
+system enters such state.
+
+Step-by-step instructions for using firescope with early OHCI initialization:
+
+1) Verify that your hardware is supported:
+
+   Load the ohci1394 or the fw-ohci module and check your kernel logs.
+   You should see a line similar to
+
+   ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18]  MMIO=[fe9ff800-fe9fffff]
+   ... Max Packet=[2048]  IR/IT contexts=[4/8]
+
+   when loading the driver. If you have no supported controller, many PCI,
+   CardBus and even some Express cards which are fully compliant to OHCI-1394
+   specification are available. If it requires no driver for Windows operating
+   systems, it most likely is. Only specialized shops have cards which are not
+   compliant, they are based on TI PCILynx chips and require drivers for Win-
+   dows operating systems.
+
+2) Establish a working FireWire cable connection:
+
+   Any FireWire cable, as long at it provides electrically and mechanically
+   stable connection and has matching connectors (there are small 4-pin and
+   large 6-pin FireWire ports) will do.
+
+   If an driver is running on both machines you should see a line like
+
+   ieee1394: Node added: ID:BUS[0-01:1023]  GUID[0090270001b84bba]
+
+   on both machines in the kernel log when the cable is plugged in
+   and connects the two machines.
+
+3) Test physical DMA using firescope:
+
+   On the debug host,
+	- load the raw1394 module,
+	- make sure that /dev/raw1394 is accessible,
+   then start firescope:
+
+	$ firescope
+	Port 0 (ohci1394) opened, 2 nodes detected
+
+	FireScope
+	---------
+	Target : <unspecified>
+	Gen    : 1
+	[Ctrl-T] choose target
+	[Ctrl-H] this menu
+	[Ctrl-Q] quit
+
+    ------> Press Ctrl-T now, the output should be similar to:
+
+	2 nodes available, local node is: 0
+	 0: ffc0, uuid: 00000000 00000000 [LOCAL]
+	 1: ffc1, uuid: 00279000 ba4bb801
+
+   Besides the [LOCAL] node, it must show another node without error message.
+
+4) Prepare for debugging with early OHCI-1394 initialization:
+
+   4.1) Kernel compilation and installation on debug target
+
+   Compile the kernel to be debugged with CONFIG_PROVIDE_OHCI1394_DMA_INIT
+   (Kernel hacking: Provide code for enabling DMA over FireWire early on boot)
+   enabled and install it on the machine to be debugged (debug target).
+
+   4.2) Transfer the System.map of the debugged kernel to the debug host
+
+   Copy the System.map of the kernel be debugged to the debug host (the host
+   which is connected to the debugged machine over the FireWire cable).
+
+5) Retrieving the printk buffer contents:
+
+   With the FireWire cable connected, the OHCI-1394 driver on the debugging
+   host loaded, reboot the debugged machine, booting the kernel which has
+   CONFIG_PROVIDE_OHCI1394_DMA_INIT enabled, with the option ohci1394_dma=early.
+
+   Then, on the debugging host, run firescope, for example by using -A:
+
+	firescope -A System.map-of-debug-target-kernel
+
+   Note: -A automatically attaches to the first non-local node. It only works
+   reliably if only connected two machines are connected using FireWire.
+
+   After having attached to the debug target, press Ctrl-D to view the
+   complete printk buffer or Ctrl-U to enter auto update mode and get an
+   updated live view of recent kernel messages logged on the debug target.
+
+   Call "firescope -h" to get more information on firescope's options.
+
+Notes
+-----
+Documentation and specifications: ftp://ftp.suse.de/private/bk/firewire/docs
+
+FireWire is a trademark of Apple Inc. - for more information please refer to:
+http://en.wikipedia.org/wiki/FireWire

Documentation/kernel-parameters.txt

@@ -416,8 +416,21 @@ and is between 256 and 4096 characters. It is defined in the file
 			[SPARC64] tick
 			[X86-64] hpet,tsc
 
-	code_bytes	[IA32] How many bytes of object code to print in an
-			oops report.
+	clearcpuid=BITNUM [X86]
+			Disable CPUID feature X for the kernel. See
+			include/asm-x86/cpufeature.h for the valid bit numbers.
+			Note the Linux specific bits are not necessarily
+			stable over kernel options, but the vendor specific
+			ones should be.
+			Also note that user programs calling CPUID directly
+			or using the feature without checking anything
+			will still see it. This just prevents it from
+			being used by the kernel or shown in /proc/cpuinfo.
+			Also note the kernel might malfunction if you disable
+			some critical bits.
+
+	code_bytes	[IA32/X86_64] How many bytes of object code to print
+			in an oops report.
 			Range: 0 - 8192
 			Default: 64
 
@@ -570,6 +583,12 @@ and is between 256 and 4096 characters. It is defined in the file
 			See drivers/char/README.epca and
 			Documentation/digiepca.txt.
 
+	disable_mtrr_trim [X86, Intel and AMD only]
+			By default the kernel will trim any uncacheable
+			memory out of your available memory pool based on
+			MTRR settings.  This parameter disables that behavior,
+			possibly causing your machine to run very slowly.
+
 	dmasound=	[HW,OSS] Sound subsystem buffers
 
 	dscc4.setup=	[NET]
@@ -660,6 +679,10 @@ and is between 256 and 4096 characters. It is defined in the file
 
 	gamma=		[HW,DRM]
 
+	gart_fix_e820=  [X86_64] disable the fix e820 for K8 GART
+			Format: off | on
+			default: on
+
 	gdth=		[HW,SCSI]
 			See header of drivers/scsi/gdth.c.
 
@@ -794,6 +817,16 @@ and is between 256 and 4096 characters. It is defined in the file
 			for translation below 32 bit and if not available
 			then look in the higher range.
 
+	io_delay=	[X86-32,X86-64] I/O delay method
+		0x80
+			Standard port 0x80 based delay
+		0xed
+			Alternate port 0xed based delay (needed on some systems)
+		udelay
+			Simple two microseconds delay
+		none
+			No delay
+
 	io7=		[HW] IO7 for Marvel based alpha systems
 			See comment before marvel_specify_io7 in
 			arch/alpha/kernel/core_marvel.c.
@@ -1059,6 +1092,11 @@ and is between 256 and 4096 characters. It is defined in the file
 			Multi-Function General Purpose Timers on AMD Geode
 			platforms.
 
+	mfgptfix	[X86-32] Fix MFGPT timers on AMD Geode platforms when
+			the BIOS has incorrectly applied a workaround. TinyBIOS
+			version 0.98 is known to be affected, 0.99 fixes the
+			problem by letting the user disable the workaround.
+
 	mga=		[HW,DRM]
 
 	mousedev.tap_time=
@@ -1159,6 +1197,8 @@ and is between 256 and 4096 characters. It is defined in the file
 
 	nodisconnect	[HW,SCSI,M68K] Disables SCSI disconnects.
 
+	noefi		[X86-32,X86-64] Disable EFI runtime services support.
+
 	noexec		[IA-64]
 
 	noexec		[X86-32,X86-64]
@@ -1169,6 +1209,8 @@ and is between 256 and 4096 characters. It is defined in the file
 			register save and restore. The kernel will only save
 			legacy floating-point registers on task switch.
 
+	noclflush	[BUGS=X86] Don't use the CLFLUSH instruction
+
 	nohlt		[BUGS=ARM]
 
 	no-hlt		[BUGS=X86-32] Tells the kernel that the hlt
@@ -1978,6 +2020,11 @@ and is between 256 and 4096 characters. It is defined in the file
 			vdso=1: enable VDSO (default)
 			vdso=0: disable VDSO mapping
 
+	vdso32=		[X86-32,X86-64]
+			vdso32=2: enable compat VDSO (default with COMPAT_VDSO)
+			vdso32=1: enable 32-bit VDSO (default)
+			vdso32=0: disable 32-bit VDSO mapping
+
 	vector=		[IA-64,SMP]
 			vector=percpu: enable percpu vector domain
 

Documentation/x86_64/boot-options.txt

@@ -110,12 +110,18 @@ Idle loop
 
 Rebooting
 
-   reboot=b[ios] | t[riple] | k[bd] [, [w]arm | [c]old]
+   reboot=b[ios] | t[riple] | k[bd] | a[cpi] | e[fi] [, [w]arm | [c]old]
    bios	  Use the CPU reboot vector for warm reset
    warm   Don't set the cold reboot flag
    cold   Set the cold reboot flag
    triple Force a triple fault (init)
    kbd    Use the keyboard controller. cold reset (default)
+   acpi   Use the ACPI RESET_REG in the FADT. If ACPI is not configured or the
+          ACPI reset does not work, the reboot path attempts the reset using
+          the keyboard controller.
+   efi    Use efi reset_system runtime service. If EFI is not configured or the
+          EFI reset does not work, the reboot path attempts the reset using
+          the keyboard controller.
 
    Using warm reset will be much faster especially on big memory
    systems because the BIOS will not go through the memory check.

Documentation/x86_64/uefi.txt

@@ -19,6 +19,10 @@ Mechanics:
 - Build the kernel with the following configuration.
 	CONFIG_FB_EFI=y
 	CONFIG_FRAMEBUFFER_CONSOLE=y
+  If EFI runtime services are expected, the following configuration should
+  be selected.
+	CONFIG_EFI=y
+	CONFIG_EFI_VARS=y or m		# optional
 - Create a VFAT partition on the disk
 - Copy the following to the VFAT partition:
 	elilo bootloader with x86_64 support, elilo configuration file,
@@ -27,3 +31,8 @@ Mechanics:
 	can be found in the elilo sourceforge project.
 - Boot to EFI shell and invoke elilo choosing the kernel image built
   in first step.
+- If some or all EFI runtime services don't work, you can try following
+  kernel command line parameters to turn off some or all EFI runtime
+  services.
+	noefi		turn off all EFI runtime services
+	reboot_type=k	turn off EFI reboot runtime service

arch/arm/Kconfig

@@ -91,6 +91,11 @@ config GENERIC_IRQ_PROBE
 	bool
 	default y
 
+config GENERIC_LOCKBREAK
+	bool
+	default y
+	depends on SMP && PREEMPT
+
 config RWSEM_GENERIC_SPINLOCK
 	bool
 	default y

arch/ia64/Kconfig

@@ -42,6 +42,11 @@ config MMU
 config SWIOTLB
        bool
 
+config GENERIC_LOCKBREAK
+	bool
+	default y
+	depends on SMP && PREEMPT
+
 config RWSEM_XCHGADD_ALGORITHM
 	bool
 	default y
@@ -75,6 +80,9 @@ config GENERIC_TIME_VSYSCALL
 	bool
 	default y
 
+config ARCH_SETS_UP_PER_CPU_AREA
+	def_bool y
+
 config DMI
 	bool
 	default y

arch/ia64/ia32/binfmt_elf32.c

@@ -222,7 +222,8 @@ elf32_set_personality (void)
 }
 
 static unsigned long
-elf32_map (struct file *filep, unsigned long addr, struct elf_phdr *eppnt, int prot, int type)
+elf32_map(struct file *filep, unsigned long addr, struct elf_phdr *eppnt,
+		int prot, int type, unsigned long unused)
 {
 	unsigned long pgoff = (eppnt->p_vaddr) & ~IA32_PAGE_MASK;
 

arch/ia64/kernel/module.c

@@ -947,7 +947,7 @@ percpu_modcopy (void *pcpudst, const void *src, unsigned long size)
 {
 	unsigned int i;
 	for_each_possible_cpu(i) {
-		memcpy(pcpudst + __per_cpu_offset[i], src, size);
+		memcpy(pcpudst + per_cpu_offset(i), src, size);
 	}
 }
 #endif /* CONFIG_SMP */

arch/m32r/Kconfig

@@ -235,6 +235,11 @@ config IRAM_SIZE
 # Define implied options from the CPU selection here
 #
 
+config GENERIC_LOCKBREAK
+	bool
+	default y
+	depends on SMP && PREEMPT
+
 config RWSEM_GENERIC_SPINLOCK
 	bool
 	depends on M32R

arch/mips/Kconfig

@@ -694,6 +694,11 @@ source "arch/mips/vr41xx/Kconfig"
 
 endmenu
 
+config GENERIC_LOCKBREAK
+	bool
+	default y
+	depends on SMP && PREEMPT
+
 config RWSEM_GENERIC_SPINLOCK
 	bool
 	default y

arch/mips/kernel/i8253.c

@@ -24,9 +24,7 @@ DEFINE_SPINLOCK(i8253_lock);
 static void init_pit_timer(enum clock_event_mode mode,
 			   struct clock_event_device *evt)
 {
-	unsigned long flags;
-
-	spin_lock_irqsave(&i8253_lock, flags);
+	spin_lock(&i8253_lock);
 
 	switch(mode) {
 	case CLOCK_EVT_MODE_PERIODIC:
@@ -55,7 +53,7 @@ static void init_pit_timer(enum clock_event_mode mode,
 		/* Nothing to do here */
 		break;
 	}
-	spin_unlock_irqrestore(&i8253_lock, flags);
+	spin_unlock(&i8253_lock);
 }
 
 /*
@@ -65,12 +63,10 @@ static void init_pit_timer(enum clock_event_mode mode,
  */
 static int pit_next_event(unsigned long delta, struct clock_event_device *evt)
 {
-	unsigned long flags;
-
-	spin_lock_irqsave(&i8253_lock, flags);
+	spin_lock(&i8253_lock);
 	outb_p(delta & 0xff , PIT_CH0);	/* LSB */
 	outb(delta >> 8 , PIT_CH0);	/* MSB */
-	spin_unlock_irqrestore(&i8253_lock, flags);
+	spin_unlock(&i8253_lock);
 
 	return 0;
 }

arch/parisc/Kconfig

@@ -19,6 +19,11 @@ config MMU
 config STACK_GROWSUP
 	def_bool y
 
+config GENERIC_LOCKBREAK
+	bool
+	default y
+	depends on SMP && PREEMPT
+
 config RWSEM_GENERIC_SPINLOCK
 	def_bool y
 

arch/powerpc/Kconfig

@@ -42,6 +42,9 @@ config GENERIC_HARDIRQS
 	bool
 	default y
 
+config ARCH_SETS_UP_PER_CPU_AREA
+	def_bool PPC64
+
 config IRQ_PER_CPU
 	bool
 	default y
@@ -53,6 +56,11 @@ config RWSEM_XCHGADD_ALGORITHM
 	bool
 	default y
 
+config GENERIC_LOCKBREAK
+	bool
+	default y
+	depends on SMP && PREEMPT
+
 config ARCH_HAS_ILOG2_U32
 	bool
 	default y

arch/powerpc/kernel/ptrace.c

@@ -256,7 +256,7 @@ static int set_evrregs(struct task_struct *task, unsigned long *data)
 #endif /* CONFIG_SPE */
 
 
-static void set_single_step(struct task_struct *task)
+void user_enable_single_step(struct task_struct *task)
 {
 	struct pt_regs *regs = task->thread.regs;
 
@@ -271,7 +271,7 @@ static void set_single_step(struct task_struct *task)
 	set_tsk_thread_flag(task, TIF_SINGLESTEP);
 }
 
-static void clear_single_step(struct task_struct *task)
+void user_disable_single_step(struct task_struct *task)
 {
 	struct pt_regs *regs = task->thread.regs;
 
@@ -313,7 +313,7 @@ static int ptrace_set_debugreg(struct task_struct *task, unsigned long addr,
 void ptrace_disable(struct task_struct *child)
 {
 	/* make sure the single step bit is not set. */
-	clear_single_step(child);
+	user_disable_single_step(child);
 }
 
 /*
@@ -445,52 +445,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 		break;
 	}
 
-	case PTRACE_SYSCALL: /* continue and stop at next (return from) syscall */
-	case PTRACE_CONT: { /* restart after signal. */
-		ret = -EIO;
-		if (!valid_signal(data))
-			break;
-		if (request == PTRACE_SYSCALL)
-			set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		else
-			clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		child->exit_code = data;
-		/* make sure the single step bit is not set. */
-		clear_single_step(child);
-		wake_up_process(child);
-		ret = 0;
-		break;
-	}
-
-/*
- * make the child exit.  Best I can do is send it a sigkill.
- * perhaps it should be put in the status that it wants to
- * exit.
- */
-	case PTRACE_KILL: {
-		ret = 0;
-		if (child->exit_state == EXIT_ZOMBIE)	/* already dead */
-			break;
-		child->exit_code = SIGKILL;
-		/* make sure the single step bit is not set. */
-		clear_single_step(child);
-		wake_up_process(child);
-		break;
-	}
-
-	case PTRACE_SINGLESTEP: {  /* set the trap flag. */
-		ret = -EIO;
-		if (!valid_signal(data))
-			break;
-		clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		set_single_step(child);
-		child->exit_code = data;
-		/* give it a chance to run. */
-		wake_up_process(child);
-		ret = 0;
-		break;
-	}
-
 	case PTRACE_GET_DEBUGREG: {
 		ret = -EINVAL;
 		/* We only support one DABR and no IABRS at the moment */

arch/sparc64/Kconfig

@@ -66,6 +66,9 @@ config AUDIT_ARCH
 	bool
 	default y
 
+config ARCH_SETS_UP_PER_CPU_AREA
+	def_bool y
+
 config ARCH_NO_VIRT_TO_BUS
 	def_bool y
 
@@ -200,6 +203,11 @@ config US2E_FREQ
 	  If in doubt, say N.
 
 # Global things across all Sun machines.
+config GENERIC_LOCKBREAK
+	bool
+	default y
+	depends on SMP && PREEMPT
+
 config RWSEM_GENERIC_SPINLOCK
 	bool
 

arch/um/kernel/ksyms.c

@@ -71,10 +71,10 @@ EXPORT_SYMBOL(dump_thread);
 
 /* required for SMP */
 
-extern void FASTCALL( __write_lock_failed(rwlock_t *rw));
+extern void __write_lock_failed(rwlock_t *rw);
 EXPORT_SYMBOL(__write_lock_failed);
 
-extern void FASTCALL( __read_lock_failed(rwlock_t *rw));
+extern void __read_lock_failed(rwlock_t *rw);
 EXPORT_SYMBOL(__read_lock_failed);
 
 #endif

arch/um/sys-i386/signal.c

@@ -3,10 +3,10 @@
  * Licensed under the GPL
  */
 
-#include "linux/ptrace.h"
-#include "asm/unistd.h"
-#include "asm/uaccess.h"
-#include "asm/ucontext.h"
+#include <linux/ptrace.h>
+#include <asm/unistd.h>
+#include <asm/uaccess.h>
+#include <asm/ucontext.h>
 #include "frame_kern.h"
 #include "skas.h"
 
@@ -18,17 +18,17 @@ void copy_sc(struct uml_pt_regs *regs, void *from)
 	REGS_FS(regs->gp) = sc->fs;
 	REGS_ES(regs->gp) = sc->es;
 	REGS_DS(regs->gp) = sc->ds;
-	REGS_EDI(regs->gp) = sc->edi;
-	REGS_ESI(regs->gp) = sc->esi;
-	REGS_EBP(regs->gp) = sc->ebp;
-	REGS_SP(regs->gp) = sc->esp;
-	REGS_EBX(regs->gp) = sc->ebx;
-	REGS_EDX(regs->gp) = sc->edx;
-	REGS_ECX(regs->gp) = sc->ecx;
-	REGS_EAX(regs->gp) = sc->eax;
-	REGS_IP(regs->gp) = sc->eip;
+	REGS_EDI(regs->gp) = sc->di;
+	REGS_ESI(regs->gp) = sc->si;
+	REGS_EBP(regs->gp) = sc->bp;
+	REGS_SP(regs->gp) = sc->sp;
+	REGS_EBX(regs->gp) = sc->bx;
+	REGS_EDX(regs->gp) = sc->dx;
+	REGS_ECX(regs->gp) = sc->cx;
+	REGS_EAX(regs->gp) = sc->ax;
+	REGS_IP(regs->gp) = sc->ip;
 	REGS_CS(regs->gp) = sc->cs;
-	REGS_EFLAGS(regs->gp) = sc->eflags;
+	REGS_EFLAGS(regs->gp) = sc->flags;
 	REGS_SS(regs->gp) = sc->ss;
 }
 
@@ -229,18 +229,18 @@ static int copy_sc_to_user(struct sigcontext __user *to,
 	sc.fs = REGS_FS(regs->regs.gp);
 	sc.es = REGS_ES(regs->regs.gp);
 	sc.ds = REGS_DS(regs->regs.gp);
-	sc.edi = REGS_EDI(regs->regs.gp);
-	sc.esi = REGS_ESI(regs->regs.gp);
-	sc.ebp = REGS_EBP(regs->regs.gp);
-	sc.esp = sp;
-	sc.ebx = REGS_EBX(regs->regs.gp);
-	sc.edx = REGS_EDX(regs->regs.gp);
-	sc.ecx = REGS_ECX(regs->regs.gp);
-	sc.eax = REGS_EAX(regs->regs.gp);
-	sc.eip = REGS_IP(regs->regs.gp);
+	sc.di = REGS_EDI(regs->regs.gp);
+	sc.si = REGS_ESI(regs->regs.gp);
+	sc.bp = REGS_EBP(regs->regs.gp);
+	sc.sp = sp;
+	sc.bx = REGS_EBX(regs->regs.gp);
+	sc.dx = REGS_EDX(regs->regs.gp);
+	sc.cx = REGS_ECX(regs->regs.gp);
+	sc.ax = REGS_EAX(regs->regs.gp);
+	sc.ip = REGS_IP(regs->regs.gp);
 	sc.cs = REGS_CS(regs->regs.gp);
-	sc.eflags = REGS_EFLAGS(regs->regs.gp);
-	sc.esp_at_signal = regs->regs.gp[UESP];
+	sc.flags = REGS_EFLAGS(regs->regs.gp);
+	sc.sp_at_signal = regs->regs.gp[UESP];
 	sc.ss = regs->regs.gp[SS];
 	sc.cr2 = fi->cr2;
 	sc.err = fi->error_code;

arch/um/sys-x86_64/signal.c

@@ -4,11 +4,11 @@
  * Licensed under the GPL
  */
 
-#include "linux/personality.h"
-#include "linux/ptrace.h"
-#include "asm/unistd.h"
-#include "asm/uaccess.h"
-#include "asm/ucontext.h"
+#include <linux/personality.h>
+#include <linux/ptrace.h>
+#include <asm/unistd.h>
+#include <asm/uaccess.h>
+#include <asm/ucontext.h>
 #include "frame_kern.h"
 #include "skas.h"
 
@@ -27,16 +27,16 @@ void copy_sc(struct uml_pt_regs *regs, void *from)
 	GETREG(regs, R13, sc, r13);
 	GETREG(regs, R14, sc, r14);
 	GETREG(regs, R15, sc, r15);
-	GETREG(regs, RDI, sc, rdi);
-	GETREG(regs, RSI, sc, rsi);
-	GETREG(regs, RBP, sc, rbp);
-	GETREG(regs, RBX, sc, rbx);
-	GETREG(regs, RDX, sc, rdx);
-	GETREG(regs, RAX, sc, rax);
-	GETREG(regs, RCX, sc, rcx);
-	GETREG(regs, RSP, sc, rsp);
-	GETREG(regs, RIP, sc, rip);
-	GETREG(regs, EFLAGS, sc, eflags);
+	GETREG(regs, RDI, sc, di);
+	GETREG(regs, RSI, sc, si);
+	GETREG(regs, RBP, sc, bp);
+	GETREG(regs, RBX, sc, bx);
+	GETREG(regs, RDX, sc, dx);
+	GETREG(regs, RAX, sc, ax);
+	GETREG(regs, RCX, sc, cx);
+	GETREG(regs, RSP, sc, sp);
+	GETREG(regs, RIP, sc, ip);
+	GETREG(regs, EFLAGS, sc, flags);
 	GETREG(regs, CS, sc, cs);
 
 #undef GETREG
@@ -61,16 +61,16 @@ static int copy_sc_from_user(struct pt_regs *regs,
 	err |= GETREG(regs, R13, from, r13);
 	err |= GETREG(regs, R14, from, r14);
 	err |= GETREG(regs, R15, from, r15);
-	err |= GETREG(regs, RDI, from, rdi);
-	err |= GETREG(regs, RSI, from, rsi);
-	err |= GETREG(regs, RBP, from, rbp);
-	err |= GETREG(regs, RBX, from, rbx);
-	err |= GETREG(regs, RDX, from, rdx);
-	err |= GETREG(regs, RAX, from, rax);
-	err |= GETREG(regs, RCX, from, rcx);
-	err |= GETREG(regs, RSP, from, rsp);
-	err |= GETREG(regs, RIP, from, rip);
-	err |= GETREG(regs, EFLAGS, from, eflags);
+	err |= GETREG(regs, RDI, from, di);
+	err |= GETREG(regs, RSI, from, si);
+	err |= GETREG(regs, RBP, from, bp);
+	err |= GETREG(regs, RBX, from, bx);
+	err |= GETREG(regs, RDX, from, dx);
+	err |= GETREG(regs, RAX, from, ax);
+	err |= GETREG(regs, RCX, from, cx);
+	err |= GETREG(regs, RSP, from, sp);
+	err |= GETREG(regs, RIP, from, ip);
+	err |= GETREG(regs, EFLAGS, from, flags);
 	err |= GETREG(regs, CS, from, cs);
 	if (err)
 		return 1;
@@ -108,19 +108,19 @@ static int copy_sc_to_user(struct sigcontext __user *to,
 	__put_user((regs)->regs.gp[(regno) / sizeof(unsigned long)],	\
 		   &(sc)->regname)
 
-	err |= PUTREG(regs, RDI, to, rdi);
-	err |= PUTREG(regs, RSI, to, rsi);
-	err |= PUTREG(regs, RBP, to, rbp);
+	err |= PUTREG(regs, RDI, to, di);
+	err |= PUTREG(regs, RSI, to, si);
+	err |= PUTREG(regs, RBP, to, bp);
 	/*
 	 * Must use orignal RSP, which is passed in, rather than what's in
 	 * the pt_regs, because that's already been updated to point at the
 	 * signal frame.
 	 */
-	err |= __put_user(sp, &to->rsp);
-	err |= PUTREG(regs, RBX, to, rbx);
-	err |= PUTREG(regs, RDX, to, rdx);
-	err |= PUTREG(regs, RCX, to, rcx);
-	err |= PUTREG(regs, RAX, to, rax);
+	err |= __put_user(sp, &to->sp);
+	err |= PUTREG(regs, RBX, to, bx);
+	err |= PUTREG(regs, RDX, to, dx);
+	err |= PUTREG(regs, RCX, to, cx);
+	err |= PUTREG(regs, RAX, to, ax);
 	err |= PUTREG(regs, R8, to, r8);
 	err |= PUTREG(regs, R9, to, r9);
 	err |= PUTREG(regs, R10, to, r10);
@@ -135,8 +135,8 @@ static int copy_sc_to_user(struct sigcontext __user *to,
 	err |= __put_user(fi->error_code, &to->err);
 	err |= __put_user(fi->trap_no, &to->trapno);
 
-	err |= PUTREG(regs, RIP, to, rip);
-	err |= PUTREG(regs, EFLAGS, to, eflags);
+	err |= PUTREG(regs, RIP, to, ip);
+	err |= PUTREG(regs, EFLAGS, to, flags);
 #undef PUTREG
 
 	err |= __put_user(mask, &to->oldmask);

arch/x86/Kconfig

@@ -17,81 +17,69 @@ config X86_64
 
 ### Arch settings
 config X86
-	bool
-	default y
+	def_bool y
+
+config GENERIC_LOCKBREAK
+	def_bool n
 
 config GENERIC_TIME
-	bool
-	default y
+	def_bool y
 
 config GENERIC_CMOS_UPDATE
-	bool
-	default y
+	def_bool y
 
 config CLOCKSOURCE_WATCHDOG
-	bool
-	default y
+	def_bool y
 
 config GENERIC_CLOCKEVENTS
-	bool
-	default y
+	def_bool y
 
 config GENERIC_CLOCKEVENTS_BROADCAST
-	bool
-	default y
+	def_bool y
 	depends on X86_64 || (X86_32 && X86_LOCAL_APIC)
 
 config LOCKDEP_SUPPORT
-	bool
-	default y
+	def_bool y
 
 config STACKTRACE_SUPPORT
-	bool
-	default y
+	def_bool y
 
 config SEMAPHORE_SLEEPERS
-	bool
-	default y
+	def_bool y
 
 config MMU
-	bool
-	default y
+	def_bool y
 
 config ZONE_DMA
-	bool
-	default y
+	def_bool y
 
 config QUICKLIST
-	bool
-	default X86_32
+	def_bool X86_32
 
 config SBUS
 	bool
 
 config GENERIC_ISA_DMA
-	bool
-	default y
+	def_bool y
 
 config GENERIC_IOMAP
-	bool
-	default y
+	def_bool y
 
 config GENERIC_BUG
-	bool
-	default y
+	def_bool y
 	depends on BUG
 
 config GENERIC_HWEIGHT
-	bool
-	default y
+	def_bool y
+
+config GENERIC_GPIO
+	def_bool n
 
 config ARCH_MAY_HAVE_PC_FDC
-	bool
-	default y
+	def_bool y
 
 config DMI
-	bool
-	default y
+	def_bool y
 
 config RWSEM_GENERIC_SPINLOCK
 	def_bool !X86_XADD
@@ -112,6 +100,9 @@ config GENERIC_TIME_VSYSCALL
 	bool
 	default X86_64
 
+config HAVE_SETUP_PER_CPU_AREA
+	def_bool X86_64
+
 config ARCH_SUPPORTS_OPROFILE
 	bool
 	default y
@@ -144,9 +135,17 @@ config GENERIC_PENDING_IRQ
 
 config X86_SMP
 	bool
-	depends on X86_32 && SMP && !X86_VOYAGER
+	depends on SMP && ((X86_32 && !X86_VOYAGER) || X86_64)
 	default y
 
+config X86_32_SMP
+	def_bool y
+	depends on X86_32 && SMP
+
+config X86_64_SMP
+	def_bool y
+	depends on X86_64 && SMP
+
 config X86_HT
 	bool
 	depends on SMP
@@ -292,6 +291,18 @@ config X86_ES7000
 	  Only choose this option if you have such a system, otherwise you
 	  should say N here.
 
+config X86_RDC321X
+	bool "RDC R-321x SoC"
+	depends on X86_32
+	select M486
+	select X86_REBOOTFIXUPS
+	select GENERIC_GPIO
+	select LEDS_GPIO
+	help
+	  This option is needed for RDC R-321x system-on-chip, also known
+	  as R-8610-(G).
+	  If you don't have one of these chips, you should say N here.
+
 config X86_VSMP
 	bool "Support for ScaleMP vSMP"
 	depends on X86_64 && PCI
@@ -303,8 +314,8 @@ config X86_VSMP
 endchoice
 
 config SCHED_NO_NO_OMIT_FRAME_POINTER
-	bool "Single-depth WCHAN output"
-	default y
+	def_bool y
+	prompt "Single-depth WCHAN output"
 	depends on X86_32
 	help
 	  Calculate simpler /proc/<PID>/wchan values. If this option
@@ -314,18 +325,8 @@ config SCHED_NO_NO_OMIT_FRAME_POINTER
 
 	  If in doubt, say "Y".
 
-config PARAVIRT
-	bool
-	depends on X86_32 && !(X86_VISWS || X86_VOYAGER)
-	help
-	  This changes the kernel so it can modify itself when it is run
-	  under a hypervisor, potentially improving performance significantly
-	  over full virtualization.  However, when run without a hypervisor
-	  the kernel is theoretically slower and slightly larger.
-
 menuconfig PARAVIRT_GUEST
 	bool "Paravirtualized guest support"
-	depends on X86_32
 	help
 	  Say Y here to get to see options related to running Linux under
 	  various hypervisors.  This option alone does not add any kernel code.
@@ -339,6 +340,7 @@ source "arch/x86/xen/Kconfig"
 config VMI
 	bool "VMI Guest support"
 	select PARAVIRT
+	depends on X86_32
 	depends on !(X86_VISWS || X86_VOYAGER)
 	help
 	  VMI provides a paravirtualized interface to the VMware ESX server
@@ -348,40 +350,43 @@ config VMI
 
 source "arch/x86/lguest/Kconfig"
 
+config PARAVIRT
+	bool "Enable paravirtualization code"
+	depends on !(X86_VISWS || X86_VOYAGER)
+	help
+	  This changes the kernel so it can modify itself when it is run
+	  under a hypervisor, potentially improving performance significantly
+	  over full virtualization.  However, when run without a hypervisor
+	  the kernel is theoretically slower and slightly larger.
+
 endif
 
 config ACPI_SRAT
-	bool
-	default y
+	def_bool y
 	depends on X86_32 && ACPI && NUMA && (X86_SUMMIT || X86_GENERICARCH)
 	select ACPI_NUMA
 
 config HAVE_ARCH_PARSE_SRAT
-       bool
-       default y
-       depends on ACPI_SRAT
+	def_bool y
+	depends on ACPI_SRAT
 
 config X86_SUMMIT_NUMA
-	bool
-	default y
+	def_bool y
 	depends on X86_32 && NUMA && (X86_SUMMIT || X86_GENERICARCH)
 
 config X86_CYCLONE_TIMER
-	bool
-	default y
+	def_bool y
 	depends on X86_32 && X86_SUMMIT || X86_GENERICARCH
 
 config ES7000_CLUSTERED_APIC
-	bool
-	default y
+	def_bool y
 	depends on SMP && X86_ES7000 && MPENTIUMIII
 
 source "arch/x86/Kconfig.cpu"
 
 config HPET_TIMER
-	bool
+	def_bool X86_64
 	prompt "HPET Timer Support" if X86_32
-	default X86_64
 	help
          Use the IA-PC HPET (High Precision Event Timer) to manage
          time in preference to the PIT and RTC, if a HPET is
@@ -399,9 +404,8 @@ config HPET_TIMER
          Choose N to continue using the legacy 8254 timer.
 
 config HPET_EMULATE_RTC
-	bool
-	depends on HPET_TIMER && RTC=y
-	default y
+	def_bool y
+	depends on HPET_TIMER && (RTC=y || RTC=m)
 
 # Mark as embedded because too many people got it wrong.
 # The code disables itself when not needed.
@@ -441,8 +445,8 @@ config CALGARY_IOMMU
 	  If unsure, say Y.
 
 config CALGARY_IOMMU_ENABLED_BY_DEFAULT
-	bool "Should Calgary be enabled by default?"
-	default y
+	def_bool y
+	prompt "Should Calgary be enabled by default?"
 	depends on CALGARY_IOMMU
 	help
 	  Should Calgary be enabled by default? if you choose 'y', Calgary
@@ -486,9 +490,9 @@ config SCHED_SMT
 	  N here.
 
 config SCHED_MC
-	bool "Multi-core scheduler support"
+	def_bool y
+	prompt "Multi-core scheduler support"
 	depends on (X86_64 && SMP) || (X86_32 && X86_HT)
-	default y
 	help
 	  Multi-core scheduler support improves the CPU scheduler's decision
 	  making when dealing with multi-core CPU chips at a cost of slightly
@@ -522,19 +526,16 @@ config X86_UP_IOAPIC
 	  an IO-APIC, then the kernel will still run with no slowdown at all.
 
 config X86_LOCAL_APIC
-	bool
+	def_bool y
 	depends on X86_64 || (X86_32 && (X86_UP_APIC || ((X86_VISWS || SMP) && !X86_VOYAGER) || X86_GENERICARCH))
-	default y
 
 config X86_IO_APIC
-	bool
+	def_bool y
 	depends on X86_64 || (X86_32 && (X86_UP_IOAPIC || (SMP && !(X86_VISWS || X86_VOYAGER)) || X86_GENERICARCH))
-	default y
 
 config X86_VISWS_APIC
-	bool
+	def_bool y
 	depends on X86_32 && X86_VISWS
-	default y
 
 config X86_MCE
 	bool "Machine Check Exception"
@@ -554,17 +555,17 @@ config X86_MCE
 	  the 386 and 486, so nearly everyone can say Y here.
 
 config X86_MCE_INTEL
-	bool "Intel MCE features"
+	def_bool y
+	prompt "Intel MCE features"
 	depends on X86_64 && X86_MCE && X86_LOCAL_APIC
-	default y
 	help
 	   Additional support for intel specific MCE features such as
 	   the thermal monitor.
 
 config X86_MCE_AMD
-	bool "AMD MCE features"
+	def_bool y
+	prompt "AMD MCE features"
 	depends on X86_64 && X86_MCE && X86_LOCAL_APIC
-	default y
 	help
 	   Additional support for AMD specific MCE features such as
 	   the DRAM Error Threshold.
@@ -637,9 +638,9 @@ config I8K
 	  Say N otherwise.
 
 config X86_REBOOTFIXUPS
-	bool "Enable X86 board specific fixups for reboot"
+	def_bool n
+	prompt "Enable X86 board specific fixups for reboot"
 	depends on X86_32 && X86
-	default n
 	---help---
 	  This enables chipset and/or board specific fixups to be done
 	  in order to get reboot to work correctly. This is only needed on
@@ -648,7 +649,7 @@ config X86_REBOOTFIXUPS
 	  system.
 
 	  Currently, the only fixup is for the Geode machines using
-	  CS5530A and CS5536 chipsets.
+	  CS5530A and CS5536 chipsets and the RDC R-321x SoC.
 
 	  Say Y if you want to enable the fixup. Currently, it's safe to
 	  enable this option even if you don't need it.
@@ -672,9 +673,8 @@ config MICROCODE
 	  module will be called microcode.
 
 config MICROCODE_OLD_INTERFACE
-	bool
+	def_bool y
 	depends on MICROCODE
-	default y
 
 config X86_MSR
 	tristate "/dev/cpu/*/msr - Model-specific register support"
@@ -798,13 +798,12 @@ config PAGE_OFFSET
 	depends on X86_32
 
 config HIGHMEM
-	bool
+	def_bool y
 	depends on X86_32 && (HIGHMEM64G || HIGHMEM4G)
-	default y
 
 config X86_PAE
-	bool "PAE (Physical Address Extension) Support"
-	default n
+	def_bool n
+	prompt "PAE (Physical Address Extension) Support"
 	depends on X86_32 && !HIGHMEM4G
 	select RESOURCES_64BIT
 	help
@@ -836,10 +835,10 @@ comment "NUMA (Summit) requires SMP, 64GB highmem support, ACPI"
 	depends on X86_32 && X86_SUMMIT && (!HIGHMEM64G || !ACPI)
 
 config K8_NUMA
-       bool "Old style AMD Opteron NUMA detection"
-       depends on X86_64 && NUMA && PCI
-       default y
-       help
+	def_bool y
+	prompt "Old style AMD Opteron NUMA detection"
+	depends on X86_64 && NUMA && PCI
+	help
 	 Enable K8 NUMA node topology detection.  You should say Y here if
 	 you have a multi processor AMD K8 system. This uses an old
 	 method to read the NUMA configuration directly from the builtin
@@ -847,10 +846,10 @@ config K8_NUMA
 	 instead, which also takes priority if both are compiled in.
 
 config X86_64_ACPI_NUMA
-	bool "ACPI NUMA detection"
+	def_bool y
+	prompt "ACPI NUMA detection"
 	depends on X86_64 && NUMA && ACPI && PCI
 	select ACPI_NUMA
-	default y
 	help
 	  Enable ACPI SRAT based node topology detection.
 
@@ -864,52 +863,53 @@ config NUMA_EMU
 
 config NODES_SHIFT
 	int
+	range 1 15  if X86_64
 	default "6" if X86_64
 	default "4" if X86_NUMAQ
 	default "3"
 	depends on NEED_MULTIPLE_NODES
 
 config HAVE_ARCH_BOOTMEM_NODE
-	bool
+	def_bool y
 	depends on X86_32 && NUMA
-	default y
 
 config ARCH_HAVE_MEMORY_PRESENT
-	bool
+	def_bool y
 	depends on X86_32 && DISCONTIGMEM
-	default y
 
 config NEED_NODE_MEMMAP_SIZE
-	bool
+	def_bool y
 	depends on X86_32 && (DISCONTIGMEM || SPARSEMEM)
-	default y
 
 config HAVE_ARCH_ALLOC_REMAP
-	bool
+	def_bool y
 	depends on X86_32 && NUMA
-	default y
 
 config ARCH_FLATMEM_ENABLE
 	def_bool y
-	depends on (X86_32 && ARCH_SELECT_MEMORY_MODEL && X86_PC) || (X86_64 && !NUMA)
+	depends on X86_32 && ARCH_SELECT_MEMORY_MODEL && X86_PC && !NUMA
 
 config ARCH_DISCONTIGMEM_ENABLE
 	def_bool y
-	depends on NUMA
+	depends on NUMA && X86_32
 
 config ARCH_DISCONTIGMEM_DEFAULT
 	def_bool y
-	depends on NUMA
+	depends on NUMA && X86_32
+
+config ARCH_SPARSEMEM_DEFAULT
+	def_bool y
+	depends on X86_64
 
 config ARCH_SPARSEMEM_ENABLE
 	def_bool y
-	depends on NUMA || (EXPERIMENTAL && (X86_PC || X86_64))
+	depends on X86_64 || NUMA || (EXPERIMENTAL && X86_PC)
 	select SPARSEMEM_STATIC if X86_32
 	select SPARSEMEM_VMEMMAP_ENABLE if X86_64
 
 config ARCH_SELECT_MEMORY_MODEL
 	def_bool y
-	depends on X86_32 && ARCH_SPARSEMEM_ENABLE
+	depends on ARCH_SPARSEMEM_ENABLE
 
 config ARCH_MEMORY_PROBE
 	def_bool X86_64
@@ -987,42 +987,32 @@ config MTRR
 	  See <file:Documentation/mtrr.txt> for more information.
 
 config EFI
-	bool "Boot from EFI support"
-	depends on X86_32 && ACPI
-	default n
+	def_bool n
+	prompt "EFI runtime service support"
+	depends on ACPI
 	---help---
-	This enables the kernel to boot on EFI platforms using
-	system configuration information passed to it from the firmware.
-	This also enables the kernel to use any EFI runtime services that are
+	This enables the kernel to use EFI runtime services that are
 	available (such as the EFI variable services).
 
-	This option is only useful on systems that have EFI firmware
-	and will result in a kernel image that is ~8k larger.  In addition,
-	you must use the latest ELILO loader available at
-	<http://elilo.sourceforge.net> in order to take advantage of
-	kernel initialization using EFI information (neither GRUB nor LILO know
-	anything about EFI).  However, even with this option, the resultant
-	kernel should continue to boot on existing non-EFI platforms.
+	This option is only useful on systems that have EFI firmware.
+  	In addition, you should use the latest ELILO loader available
+  	at <http://elilo.sourceforge.net> in order to take advantage
+  	of EFI runtime services. However, even with this option, the
+  	resultant kernel should continue to boot on existing non-EFI
+  	platforms.
 
 config IRQBALANCE
-	bool "Enable kernel irq balancing"
+	def_bool y
+	prompt "Enable kernel irq balancing"
 	depends on X86_32 && SMP && X86_IO_APIC
-	default y
 	help
 	  The default yes will allow the kernel to do irq load balancing.
 	  Saying no will keep the kernel from doing irq load balancing.
 
-# turning this on wastes a bunch of space.
-# Summit needs it only when NUMA is on
-config BOOT_IOREMAP
-	bool
-	depends on X86_32 && (((X86_SUMMIT || X86_GENERICARCH) && NUMA) || (X86 && EFI))
-	default y
-
 config SECCOMP
-	bool "Enable seccomp to safely compute untrusted bytecode"
+	def_bool y
+	prompt "Enable seccomp to safely compute untrusted bytecode"
 	depends on PROC_FS
-	default y
 	help
 	  This kernel feature is useful for number crunching applications
 	  that may need to compute untrusted bytecode during their
@@ -1189,11 +1179,11 @@ config HOTPLUG_CPU
 	  suspend.
 
 config COMPAT_VDSO
-	bool "Compat VDSO support"
-	default y
-	depends on X86_32
+	def_bool y
+	prompt "Compat VDSO support"
+	depends on X86_32 || IA32_EMULATION
 	help
-	  Map the VDSO to the predictable old-style address too.
+	  Map the 32-bit VDSO to the predictable old-style address too.
 	---help---
 	  Say N here if you are running a sufficiently recent glibc
 	  version (2.3.3 or later), to remove the high-mapped
@@ -1207,30 +1197,26 @@ config ARCH_ENABLE_MEMORY_HOTPLUG
 	def_bool y
 	depends on X86_64 || (X86_32 && HIGHMEM)
 
-config MEMORY_HOTPLUG_RESERVE
-	def_bool X86_64
-	depends on (MEMORY_HOTPLUG && DISCONTIGMEM)
-
 config HAVE_ARCH_EARLY_PFN_TO_NID
 	def_bool X86_64
 	depends on NUMA
 
-config OUT_OF_LINE_PFN_TO_PAGE
-	def_bool X86_64
-	depends on DISCONTIGMEM
-
 menu "Power management options"
 	depends on !X86_VOYAGER
 
 config ARCH_HIBERNATION_HEADER
-	bool
+	def_bool y
 	depends on X86_64 && HIBERNATION
-	default y
 
 source "kernel/power/Kconfig"
 
 source "drivers/acpi/Kconfig"
 
+config X86_APM_BOOT
+	bool
+	default y
+	depends on APM || APM_MODULE
+
 menuconfig APM
 	tristate "APM (Advanced Power Management) BIOS support"
 	depends on X86_32 && PM_SLEEP && !X86_VISWS
@@ -1371,7 +1357,7 @@ menu "Bus options (PCI etc.)"
 config PCI
 	bool "PCI support" if !X86_VISWS
 	depends on !X86_VOYAGER
-	default y if X86_VISWS
+	default y
 	select ARCH_SUPPORTS_MSI if (X86_LOCAL_APIC && X86_IO_APIC)
 	help
 	  Find out whether you have a PCI motherboard. PCI is the name of a
@@ -1418,25 +1404,21 @@ config PCI_GOANY
 endchoice
 
 config PCI_BIOS
-	bool
+	def_bool y
 	depends on X86_32 && !X86_VISWS && PCI && (PCI_GOBIOS || PCI_GOANY)
-	default y
 
 # x86-64 doesn't support PCI BIOS access from long mode so always go direct.
 config PCI_DIRECT
-	bool
+	def_bool y
 	depends on PCI && (X86_64 || (PCI_GODIRECT || PCI_GOANY) || X86_VISWS)
-	default y
 
 config PCI_MMCONFIG
-	bool
+	def_bool y
 	depends on X86_32 && PCI && ACPI && (PCI_GOMMCONFIG || PCI_GOANY)
-	default y
 
 config PCI_DOMAINS
-	bool
+	def_bool y
 	depends on PCI
-	default y
 
 config PCI_MMCONFIG
 	bool "Support mmconfig PCI config space access"
@@ -1453,9 +1435,9 @@ config DMAR
 	  remapping devices.
 
 config DMAR_GFX_WA
-	bool "Support for Graphics workaround"
+	def_bool y
+	prompt "Support for Graphics workaround"
 	depends on DMAR
-	default y
 	help
 	 Current Graphics drivers tend to use physical address
 	 for DMA and avoid using DMA APIs. Setting this config
@@ -1464,9 +1446,8 @@ config DMAR_GFX_WA
 	 to use physical addresses for DMA.
 
 config DMAR_FLOPPY_WA
-	bool
+	def_bool y
 	depends on DMAR
-	default y
 	help
 	 Floppy disk drivers are know to bypass DMA API calls
 	 thereby failing to work when IOMMU is enabled. This
@@ -1479,8 +1460,7 @@ source "drivers/pci/Kconfig"
 
 # x86_64 have no ISA slots, but do have ISA-style DMA.
 config ISA_DMA_API
-	bool
-	default y
+	def_bool y
 
 if X86_32
 
@@ -1546,9 +1526,9 @@ config SCx200HR_TIMER
 	  other workaround is idle=poll boot option.
 
 config GEODE_MFGPT_TIMER
-	bool "Geode Multi-Function General Purpose Timer (MFGPT) events"
+	def_bool y
+	prompt "Geode Multi-Function General Purpose Timer (MFGPT) events"
 	depends on MGEODE_LX && GENERIC_TIME && GENERIC_CLOCKEVENTS
-	default y
 	help
 	  This driver provides a clock event source based on the MFGPT
 	  timer(s) in the CS5535 and CS5536 companion chip for the geode.
@@ -1575,6 +1555,7 @@ source "fs/Kconfig.binfmt"
 config IA32_EMULATION
 	bool "IA32 Emulation"
 	depends on X86_64
+	select COMPAT_BINFMT_ELF
 	help
 	  Include code to run 32-bit programs under a 64-bit kernel. You should
 	  likely turn this on, unless you're 100% sure that you don't have any
@@ -1587,18 +1568,16 @@ config IA32_AOUT
          Support old a.out binaries in the 32bit emulation.
 
 config COMPAT
-	bool
+	def_bool y
 	depends on IA32_EMULATION
-	default y
 
 config COMPAT_FOR_U64_ALIGNMENT
 	def_bool COMPAT
 	depends on X86_64
 
 config SYSVIPC_COMPAT
-	bool
+	def_bool y
 	depends on X86_64 && COMPAT && SYSVIPC
-	default y
 
 endmenu
 

arch/x86/Kconfig.cpu

@@ -219,10 +219,10 @@ config MGEODEGX1
 	  Select this for a Geode GX1 (Cyrix MediaGX) chip.
 
 config MGEODE_LX
-       bool "Geode GX/LX"
+	bool "Geode GX/LX"
 	depends on X86_32
-       help
-         Select this for AMD Geode GX and LX processors.
+	help
+	  Select this for AMD Geode GX and LX processors.
 
 config MCYRIXIII
 	bool "CyrixIII/VIA-C3"
@@ -258,7 +258,7 @@ config MPSC
 	  Optimize for Intel Pentium 4, Pentium D and older Nocona/Dempsey
 	  Xeon CPUs with Intel 64bit which is compatible with x86-64.
 	  Note that the latest Xeons (Xeon 51xx and 53xx) are not based on the
-          Netburst core and shouldn't use this option. You can distinguish them
+	  Netburst core and shouldn't use this option. You can distinguish them
 	  using the cpu family field
 	  in /proc/cpuinfo. Family 15 is an older Xeon, Family 6 a newer one.
 
@@ -317,81 +317,75 @@ config X86_L1_CACHE_SHIFT
 	default "6" if MK7 || MK8 || MPENTIUMM || MCORE2 || MVIAC7
 
 config X86_XADD
-	bool
+	def_bool y
 	depends on X86_32 && !M386
-	default y
 
 config X86_PPRO_FENCE
-	bool
+	bool "PentiumPro memory ordering errata workaround"
 	depends on M686 || M586MMX || M586TSC || M586 || M486 || M386 || MGEODEGX1
-	default y
+	help
+	  Old PentiumPro multiprocessor systems had errata that could cause memory
+	  operations to violate the x86 ordering standard in rare cases. Enabling this
+	  option will attempt to work around some (but not all) occurances of
+	  this problem, at the cost of much heavier spinlock and memory barrier
+	  operations.
+
+	  If unsure, say n here. Even distro kernels should think twice before enabling
+	  this: there are few systems, and an unlikely bug.
 
 config X86_F00F_BUG
-	bool
+	def_bool y
 	depends on M586MMX || M586TSC || M586 || M486 || M386
-	default y
 
 config X86_WP_WORKS_OK
-	bool
+	def_bool y
 	depends on X86_32 && !M386
-	default y
 
 config X86_INVLPG
-	bool
+	def_bool y
 	depends on X86_32 && !M386
-	default y
 
 config X86_BSWAP
-	bool
+	def_bool y
 	depends on X86_32 && !M386
-	default y
 
 config X86_POPAD_OK
-	bool
+	def_bool y
 	depends on X86_32 && !M386
-	default y
 
 config X86_ALIGNMENT_16
-	bool
+	def_bool y
 	depends on MWINCHIP3D || MWINCHIP2 || MWINCHIPC6 || MCYRIXIII || X86_ELAN || MK6 || M586MMX || M586TSC || M586 || M486 || MVIAC3_2 || MGEODEGX1
-	default y
 
 config X86_GOOD_APIC
-	bool
+	def_bool y
 	depends on MK7 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || MK8 || MEFFICEON || MCORE2 || MVIAC7 || X86_64
-	default y
 
 config X86_INTEL_USERCOPY
-	bool
+	def_bool y
 	depends on MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M586MMX || X86_GENERIC || MK8 || MK7 || MEFFICEON || MCORE2
-	default y
 
 config X86_USE_PPRO_CHECKSUM
-	bool
+	def_bool y
 	depends on MWINCHIP3D || MWINCHIP2 || MWINCHIPC6 || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || MK8 || MVIAC3_2 || MEFFICEON || MGEODE_LX || MCORE2
-	default y
 
 config X86_USE_3DNOW
-	bool
+	def_bool y
 	depends on (MCYRIXIII || MK7 || MGEODE_LX) && !UML
-	default y
 
 config X86_OOSTORE
-	bool
+	def_bool y
 	depends on (MWINCHIP3D || MWINCHIP2 || MWINCHIPC6) && MTRR
-	default y
 
 config X86_TSC
-	bool
+	def_bool y
 	depends on ((MWINCHIP3D || MWINCHIP2 || MCRUSOE || MEFFICEON || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || MK8 || MVIAC3_2 || MVIAC7 || MGEODEGX1 || MGEODE_LX || MCORE2) && !X86_NUMAQ) || X86_64
-	default y
 
 # this should be set for all -march=.. options where the compiler
 # generates cmov.
 config X86_CMOV
-	bool
+	def_bool y
 	depends on (MK7 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || MVIAC3_2 || MVIAC7)
-	default y
 
 config X86_MINIMUM_CPU_FAMILY
 	int
@@ -399,3 +393,6 @@ config X86_MINIMUM_CPU_FAMILY
 	default "4" if X86_32 && (X86_XADD || X86_CMPXCHG || X86_BSWAP || X86_WP_WORKS_OK)
 	default "3"
 
+config X86_DEBUGCTLMSR
+	def_bool y
+	depends on !(M586MMX || M586TSC || M586 || M486 || M386)

arch/x86/Kconfig.debug

@@ -6,7 +6,7 @@ config TRACE_IRQFLAGS_SUPPORT
 source "lib/Kconfig.debug"
 
 config EARLY_PRINTK
-	bool "Early printk" if EMBEDDED && DEBUG_KERNEL && X86_32
+	bool "Early printk" if EMBEDDED
 	default y
 	help
 	  Write kernel log output directly into the VGA buffer or to a serial
@@ -40,22 +40,49 @@ comment "Page alloc debug is incompatible with Software Suspend on i386"
 
 config DEBUG_PAGEALLOC
 	bool "Debug page memory allocations"
-	depends on DEBUG_KERNEL && !HIBERNATION && !HUGETLBFS
-	depends on X86_32
+	depends on DEBUG_KERNEL && X86_32
 	help
 	  Unmap pages from the kernel linear mapping after free_pages().
 	  This results in a large slowdown, but helps to find certain types
 	  of memory corruptions.
 
+config DEBUG_PER_CPU_MAPS
+	bool "Debug access to per_cpu maps"
+	depends on DEBUG_KERNEL
+	depends on X86_64_SMP
+	default n
+	help
+	  Say Y to verify that the per_cpu map being accessed has
+	  been setup.  Adds a fair amount of code to kernel memory
+	  and decreases performance.
+
+	  Say N if unsure.
+
 config DEBUG_RODATA
 	bool "Write protect kernel read-only data structures"
+	default y
 	depends on DEBUG_KERNEL
 	help
 	  Mark the kernel read-only data as write-protected in the pagetables,
 	  in order to catch accidental (and incorrect) writes to such const
-	  data. This option may have a slight performance impact because a
-	  portion of the kernel code won't be covered by a 2MB TLB anymore.
-	  If in doubt, say "N".
+	  data. This is recommended so that we can catch kernel bugs sooner.
+	  If in doubt, say "Y".
+
+config DEBUG_RODATA_TEST
+	bool "Testcase for the DEBUG_RODATA feature"
+	depends on DEBUG_RODATA
+	help
+	  This option enables a testcase for the DEBUG_RODATA
+	  feature as well as for the change_page_attr() infrastructure.
+	  If in doubt, say "N"
+
+config DEBUG_NX_TEST
+	tristate "Testcase for the NX non-executable stack feature"
+	depends on DEBUG_KERNEL && m
+	help
+	  This option enables a testcase for the CPU NX capability
+	  and the software setup of this feature.
+	  If in doubt, say "N"
 
 config 4KSTACKS
 	bool "Use 4Kb for kernel stacks instead of 8Kb"
@@ -75,8 +102,7 @@ config X86_FIND_SMP_CONFIG
 
 config X86_MPPARSE
 	def_bool y
-	depends on X86_LOCAL_APIC && !X86_VISWS
-	depends on X86_32
+	depends on (X86_32 && (X86_LOCAL_APIC && !X86_VISWS)) || X86_64
 
 config DOUBLEFAULT
 	default y
@@ -112,4 +138,91 @@ config IOMMU_LEAK
 	  Add a simple leak tracer to the IOMMU code. This is useful when you
 	  are debugging a buggy device driver that leaks IOMMU mappings.
 
+#
+# IO delay types:
+#
+
+config IO_DELAY_TYPE_0X80
+	int
+	default "0"
+
+config IO_DELAY_TYPE_0XED
+	int
+	default "1"
+
+config IO_DELAY_TYPE_UDELAY
+	int
+	default "2"
+
+config IO_DELAY_TYPE_NONE
+	int
+	default "3"
+
+choice
+	prompt "IO delay type"
+	default IO_DELAY_0XED
+
+config IO_DELAY_0X80
+	bool "port 0x80 based port-IO delay [recommended]"
+	help
+	  This is the traditional Linux IO delay used for in/out_p.
+	  It is the most tested hence safest selection here.
+
+config IO_DELAY_0XED
+	bool "port 0xed based port-IO delay"
+	help
+	  Use port 0xed as the IO delay. This frees up port 0x80 which is
+	  often used as a hardware-debug port.
+
+config IO_DELAY_UDELAY
+	bool "udelay based port-IO delay"
+	help
+	  Use udelay(2) as the IO delay method. This provides the delay
+	  while not having any side-effect on the IO port space.
+
+config IO_DELAY_NONE
+	bool "no port-IO delay"
+	help
+	  No port-IO delay. Will break on old boxes that require port-IO
+	  delay for certain operations. Should work on most new machines.
+
+endchoice
+
+if IO_DELAY_0X80
+config DEFAULT_IO_DELAY_TYPE
+	int
+	default IO_DELAY_TYPE_0X80
+endif
+
+if IO_DELAY_0XED
+config DEFAULT_IO_DELAY_TYPE
+	int
+	default IO_DELAY_TYPE_0XED
+endif
+
+if IO_DELAY_UDELAY
+config DEFAULT_IO_DELAY_TYPE
+	int
+	default IO_DELAY_TYPE_UDELAY
+endif
+
+if IO_DELAY_NONE
+config DEFAULT_IO_DELAY_TYPE
+	int
+	default IO_DELAY_TYPE_NONE
+endif
+
+config DEBUG_BOOT_PARAMS
+	bool "Debug boot parameters"
+	depends on DEBUG_KERNEL
+	depends on DEBUG_FS
+	help
+	  This option will cause struct boot_params to be exported via debugfs.
+
+config CPA_DEBUG
+	bool "CPA self test code"
+	depends on DEBUG_KERNEL
+	help
+	  Do change_page_attr self tests at boot.
+
 endmenu

arch/x86/Makefile

@@ -7,13 +7,252 @@ else
         KBUILD_DEFCONFIG := $(ARCH)_defconfig
 endif
 
-# No need to remake these files
-$(srctree)/arch/x86/Makefile%: ;
+# BITS is used as extension for files which are available in a 32 bit
+# and a 64 bit version to simplify shared Makefiles.
+# e.g.: obj-y += foo_$(BITS).o
+export BITS
 
 ifeq ($(CONFIG_X86_32),y)
+        BITS := 32
         UTS_MACHINE := i386
-        include $(srctree)/arch/x86/Makefile_32
+        CHECKFLAGS += -D__i386__
+
+        biarch := $(call cc-option,-m32)
+        KBUILD_AFLAGS += $(biarch)
+        KBUILD_CFLAGS += $(biarch)
+
+        ifdef CONFIG_RELOCATABLE
+                LDFLAGS_vmlinux := --emit-relocs
+        endif
+
+        KBUILD_CFLAGS += -msoft-float -mregparm=3 -freg-struct-return
+
+        # prevent gcc from keeping the stack 16 byte aligned
+        KBUILD_CFLAGS += $(call cc-option,-mpreferred-stack-boundary=2)
+
+        # Disable unit-at-a-time mode on pre-gcc-4.0 compilers, it makes gcc use
+        # a lot more stack due to the lack of sharing of stacklots:
+        KBUILD_CFLAGS += $(shell if [ $(call cc-version) -lt 0400 ] ; then \
+                echo $(call cc-option,-fno-unit-at-a-time); fi ;)
+
+        # CPU-specific tuning. Anything which can be shared with UML should go here.
+        include $(srctree)/arch/x86/Makefile_32.cpu
+        KBUILD_CFLAGS += $(cflags-y)
+
+        # temporary until string.h is fixed
+        KBUILD_CFLAGS += -ffreestanding
 else
+        BITS := 64
         UTS_MACHINE := x86_64
-        include $(srctree)/arch/x86/Makefile_64
+        CHECKFLAGS += -D__x86_64__ -m64
+
+        KBUILD_AFLAGS += -m64
+        KBUILD_CFLAGS += -m64
+
+        # FIXME - should be integrated in Makefile.cpu (Makefile_32.cpu)
+        cflags-$(CONFIG_MK8) += $(call cc-option,-march=k8)
+        cflags-$(CONFIG_MPSC) += $(call cc-option,-march=nocona)
+
+        cflags-$(CONFIG_MCORE2) += \
+                $(call cc-option,-march=core2,$(call cc-option,-mtune=generic))
+        cflags-$(CONFIG_GENERIC_CPU) += $(call cc-option,-mtune=generic)
+        KBUILD_CFLAGS += $(cflags-y)
+
+        KBUILD_CFLAGS += -mno-red-zone
+        KBUILD_CFLAGS += -mcmodel=kernel
+
+        # -funit-at-a-time shrinks the kernel .text considerably
+        # unfortunately it makes reading oopses harder.
+        KBUILD_CFLAGS += $(call cc-option,-funit-at-a-time)
+
+        # this works around some issues with generating unwind tables in older gccs
+        # newer gccs do it by default
+        KBUILD_CFLAGS += -maccumulate-outgoing-args
+
+        stackp := $(CONFIG_SHELL) $(srctree)/scripts/gcc-x86_64-has-stack-protector.sh
+        stackp-$(CONFIG_CC_STACKPROTECTOR) := $(shell $(stackp) \
+                "$(CC)" -fstack-protector )
+        stackp-$(CONFIG_CC_STACKPROTECTOR_ALL) += $(shell $(stackp) \
+                "$(CC)" -fstack-protector-all )
+
+        KBUILD_CFLAGS += $(stackp-y)
+endif
+
+# Stackpointer is addressed different for 32 bit and 64 bit x86
+sp-$(CONFIG_X86_32) := esp
+sp-$(CONFIG_X86_64) := rsp
+
+# do binutils support CFI?
+cfi := $(call as-instr,.cfi_startproc\n.cfi_rel_offset $(sp-y)$(comma)0\n.cfi_endproc,-DCONFIG_AS_CFI=1)
+# is .cfi_signal_frame supported too?
+cfi-sigframe := $(call as-instr,.cfi_startproc\n.cfi_signal_frame\n.cfi_endproc,-DCONFIG_AS_CFI_SIGNAL_FRAME=1)
+KBUILD_AFLAGS += $(cfi) $(cfi-sigframe)
+KBUILD_CFLAGS += $(cfi) $(cfi-sigframe)
+
+LDFLAGS := -m elf_$(UTS_MACHINE)
+OBJCOPYFLAGS := -O binary -R .note -R .comment -S
+
+# Speed up the build
+KBUILD_CFLAGS += -pipe
+# Workaround for a gcc prelease that unfortunately was shipped in a suse release
+KBUILD_CFLAGS += -Wno-sign-compare
+#
+KBUILD_CFLAGS += -fno-asynchronous-unwind-tables
+# prevent gcc from generating any FP code by mistake
+KBUILD_CFLAGS += $(call cc-option,-mno-sse -mno-mmx -mno-sse2 -mno-3dnow,)
+
+###
+# Sub architecture support
+# fcore-y is linked before mcore-y files.
+
+# Default subarch .c files
+mcore-y  := arch/x86/mach-default/
+
+# Voyager subarch support
+mflags-$(CONFIG_X86_VOYAGER)	:= -Iinclude/asm-x86/mach-voyager
+mcore-$(CONFIG_X86_VOYAGER)	:= arch/x86/mach-voyager/
+
+# VISWS subarch support
+mflags-$(CONFIG_X86_VISWS)	:= -Iinclude/asm-x86/mach-visws
+mcore-$(CONFIG_X86_VISWS)	:= arch/x86/mach-visws/
+
+# NUMAQ subarch support
+mflags-$(CONFIG_X86_NUMAQ)	:= -Iinclude/asm-x86/mach-numaq
+mcore-$(CONFIG_X86_NUMAQ)	:= arch/x86/mach-default/
+
+# BIGSMP subarch support
+mflags-$(CONFIG_X86_BIGSMP)	:= -Iinclude/asm-x86/mach-bigsmp
+mcore-$(CONFIG_X86_BIGSMP)	:= arch/x86/mach-default/
+
+#Summit subarch support
+mflags-$(CONFIG_X86_SUMMIT)	:= -Iinclude/asm-x86/mach-summit
+mcore-$(CONFIG_X86_SUMMIT)	:= arch/x86/mach-default/
+
+# generic subarchitecture
+mflags-$(CONFIG_X86_GENERICARCH):= -Iinclude/asm-x86/mach-generic
+fcore-$(CONFIG_X86_GENERICARCH)	+= arch/x86/mach-generic/
+mcore-$(CONFIG_X86_GENERICARCH)	:= arch/x86/mach-default/
+
+
+# ES7000 subarch support
+mflags-$(CONFIG_X86_ES7000)	:= -Iinclude/asm-x86/mach-es7000
+fcore-$(CONFIG_X86_ES7000)	:= arch/x86/mach-es7000/
+mcore-$(CONFIG_X86_ES7000)	:= arch/x86/mach-default/
+
+# RDC R-321x subarch support
+mflags-$(CONFIG_X86_RDC321X)	:= -Iinclude/asm-x86/mach-rdc321x
+mcore-$(CONFIG_X86_RDC321X)	:= arch/x86/mach-default
+core-$(CONFIG_X86_RDC321X)	+= arch/x86/mach-rdc321x/
+
+# default subarch .h files
+mflags-y += -Iinclude/asm-x86/mach-default
+
+# 64 bit does not support subarch support - clear sub arch variables
+fcore-$(CONFIG_X86_64)  :=
+mcore-$(CONFIG_X86_64)  :=
+mflags-$(CONFIG_X86_64) :=
+
+KBUILD_CFLAGS += $(mflags-y)
+KBUILD_AFLAGS += $(mflags-y)
+
+###
+# Kernel objects
+
+head-y                := arch/x86/kernel/head_$(BITS).o
+head-$(CONFIG_X86_64) += arch/x86/kernel/head64.o
+head-y                += arch/x86/kernel/init_task.o
+
+libs-y  += arch/x86/lib/
+
+# Sub architecture files that needs linking first
+core-y += $(fcore-y)
+
+# Xen paravirtualization support
+core-$(CONFIG_XEN) += arch/x86/xen/
+
+# lguest paravirtualization support
+core-$(CONFIG_LGUEST_GUEST) += arch/x86/lguest/
+
+core-y += arch/x86/kernel/
+core-y += arch/x86/mm/
+
+# Remaining sub architecture files
+core-y += $(mcore-y)
+
+core-y += arch/x86/crypto/
+core-y += arch/x86/vdso/
+core-$(CONFIG_IA32_EMULATION) += arch/x86/ia32/
+
+# drivers-y are linked after core-y
+drivers-$(CONFIG_MATH_EMULATION) += arch/x86/math-emu/
+drivers-$(CONFIG_PCI)            += arch/x86/pci/
+
+# must be linked after kernel/
+drivers-$(CONFIG_OPROFILE) += arch/x86/oprofile/
+
+ifeq ($(CONFIG_X86_32),y)
+drivers-$(CONFIG_PM) += arch/x86/power/
+drivers-$(CONFIG_FB) += arch/x86/video/
 endif
+
+####
+# boot loader support. Several targets are kept for legacy purposes
+
+boot := arch/x86/boot
+
+PHONY += zImage bzImage compressed zlilo bzlilo \
+         zdisk bzdisk fdimage fdimage144 fdimage288 isoimage install
+
+# Default kernel to build
+all: bzImage
+
+# KBUILD_IMAGE specify target image being built
+                    KBUILD_IMAGE := $(boot)/bzImage
+zImage zlilo zdisk: KBUILD_IMAGE := arch/x86/boot/zImage
+
+zImage bzImage: vmlinux
+	$(Q)$(MAKE) $(build)=$(boot) $(KBUILD_IMAGE)
+	$(Q)mkdir -p $(objtree)/arch/$(UTS_MACHINE)/boot
+	$(Q)ln -fsn ../../x86/boot/bzImage $(objtree)/arch/$(UTS_MACHINE)/boot/bzImage
+
+compressed: zImage
+
+zlilo bzlilo: vmlinux
+	$(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(KBUILD_IMAGE) zlilo
+
+zdisk bzdisk: vmlinux
+	$(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(KBUILD_IMAGE) zdisk
+
+fdimage fdimage144 fdimage288 isoimage: vmlinux
+	$(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(KBUILD_IMAGE) $@
+
+install: vdso_install
+	$(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(KBUILD_IMAGE) install
+
+PHONY += vdso_install
+vdso_install:
+	$(Q)$(MAKE) $(build)=arch/x86/vdso $@
+
+archclean:
+	$(Q)rm -rf $(objtree)/arch/i386
+	$(Q)rm -rf $(objtree)/arch/x86_64
+	$(Q)$(MAKE) $(clean)=$(boot)
+
+define archhelp
+  echo  '* bzImage      - Compressed kernel image (arch/x86/boot/bzImage)'
+  echo  '  install      - Install kernel using'
+  echo  '                  (your) ~/bin/installkernel or'
+  echo  '                  (distribution) /sbin/installkernel or'
+  echo  '                  install to $$(INSTALL_PATH) and run lilo'
+  echo  '  fdimage      - Create 1.4MB boot floppy image (arch/x86/boot/fdimage)'
+  echo  '  fdimage144   - Create 1.4MB boot floppy image (arch/x86/boot/fdimage)'
+  echo  '  fdimage288   - Create 2.8MB boot floppy image (arch/x86/boot/fdimage)'
+  echo  '  isoimage     - Create a boot CD-ROM image (arch/x86/boot/image.iso)'
+  echo  '                  bzdisk/fdimage*/isoimage also accept:'
+  echo  '                  FDARGS="..."  arguments for the booted kernel'
+  echo  '                  FDINITRD=file initrd for the booted kernel'
+endef
+
+CLEAN_FILES += arch/x86/boot/fdimage \
+	       arch/x86/boot/image.iso \
+	       arch/x86/boot/mtools.conf

arch/x86/Makefile_32

@@ -1,175 +0,0 @@
-#
-# i386 Makefile
-#
-# This file is included by the global makefile so that you can add your own
-# architecture-specific flags and dependencies. Remember to do have actions
-# for "archclean" cleaning up for this architecture.
-#
-# This file is subject to the terms and conditions of the GNU General Public
-# License.  See the file "COPYING" in the main directory of this archive
-# for more details.
-#
-# Copyright (C) 1994 by Linus Torvalds
-#
-# 19990713  Artur Skawina <skawina@geocities.com>
-#           Added '-march' and '-mpreferred-stack-boundary' support
-#
-# 20050320  Kianusch Sayah Karadji <kianusch@sk-tech.net>
-#           Added support for GEODE CPU
-
-# BITS is used as extension for files which are available in a 32 bit
-# and a 64 bit version to simplify shared Makefiles.
-# e.g.: obj-y += foo_$(BITS).o
-BITS := 32
-export BITS
-
-HAS_BIARCH      := $(call cc-option-yn, -m32)
-ifeq ($(HAS_BIARCH),y)
-AS              := $(AS) --32
-LD              := $(LD) -m elf_i386
-CC              := $(CC) -m32
-endif
-
-LDFLAGS		:= -m elf_i386
-OBJCOPYFLAGS	:= -O binary -R .note -R .comment -S
-ifdef CONFIG_RELOCATABLE
-LDFLAGS_vmlinux := --emit-relocs
-endif
-CHECKFLAGS	+= -D__i386__
-
-KBUILD_CFLAGS += -pipe -msoft-float -mregparm=3 -freg-struct-return
-
-# prevent gcc from keeping the stack 16 byte aligned
-KBUILD_CFLAGS += $(call cc-option,-mpreferred-stack-boundary=2)
-
-# CPU-specific tuning. Anything which can be shared with UML should go here.
-include $(srctree)/arch/x86/Makefile_32.cpu
-
-# temporary until string.h is fixed
-cflags-y += -ffreestanding
-
-# this works around some issues with generating unwind tables in older gccs
-# newer gccs do it by default
-cflags-y += -maccumulate-outgoing-args
-
-# Disable unit-at-a-time mode on pre-gcc-4.0 compilers, it makes gcc use
-# a lot more stack due to the lack of sharing of stacklots:
-KBUILD_CFLAGS += $(shell if [ $(call cc-version) -lt 0400 ] ; then echo $(call cc-option,-fno-unit-at-a-time); fi ;)
-
-# do binutils support CFI?
-cflags-y += $(call as-instr,.cfi_startproc\n.cfi_rel_offset esp${comma}0\n.cfi_endproc,-DCONFIG_AS_CFI=1,)
-KBUILD_AFLAGS += $(call as-instr,.cfi_startproc\n.cfi_rel_offset esp${comma}0\n.cfi_endproc,-DCONFIG_AS_CFI=1,)
-
-# is .cfi_signal_frame supported too?
-cflags-y += $(call as-instr,.cfi_startproc\n.cfi_signal_frame\n.cfi_endproc,-DCONFIG_AS_CFI_SIGNAL_FRAME=1,)
-KBUILD_AFLAGS += $(call as-instr,.cfi_startproc\n.cfi_signal_frame\n.cfi_endproc,-DCONFIG_AS_CFI_SIGNAL_FRAME=1,)
-
-KBUILD_CFLAGS += $(cflags-y)
-
-# Default subarch .c files
-mcore-y  := arch/x86/mach-default
-
-# Voyager subarch support
-mflags-$(CONFIG_X86_VOYAGER)	:= -Iinclude/asm-x86/mach-voyager
-mcore-$(CONFIG_X86_VOYAGER)	:= arch/x86/mach-voyager
-
-# VISWS subarch support
-mflags-$(CONFIG_X86_VISWS)	:= -Iinclude/asm-x86/mach-visws
-mcore-$(CONFIG_X86_VISWS)	:= arch/x86/mach-visws
-
-# NUMAQ subarch support
-mflags-$(CONFIG_X86_NUMAQ)	:= -Iinclude/asm-x86/mach-numaq
-mcore-$(CONFIG_X86_NUMAQ)	:= arch/x86/mach-default
-
-# BIGSMP subarch support
-mflags-$(CONFIG_X86_BIGSMP)	:= -Iinclude/asm-x86/mach-bigsmp
-mcore-$(CONFIG_X86_BIGSMP)	:= arch/x86/mach-default
-
-#Summit subarch support
-mflags-$(CONFIG_X86_SUMMIT) := -Iinclude/asm-x86/mach-summit
-mcore-$(CONFIG_X86_SUMMIT)  := arch/x86/mach-default
-
-# generic subarchitecture
-mflags-$(CONFIG_X86_GENERICARCH) := -Iinclude/asm-x86/mach-generic
-mcore-$(CONFIG_X86_GENERICARCH) := arch/x86/mach-default
-core-$(CONFIG_X86_GENERICARCH) += arch/x86/mach-generic/
-
-# ES7000 subarch support
-mflags-$(CONFIG_X86_ES7000)	:= -Iinclude/asm-x86/mach-es7000
-mcore-$(CONFIG_X86_ES7000)	:= arch/x86/mach-default
-core-$(CONFIG_X86_ES7000)	:= arch/x86/mach-es7000/
-
-# Xen paravirtualization support
-core-$(CONFIG_XEN)		+= arch/x86/xen/
-
-# lguest paravirtualization support
-core-$(CONFIG_LGUEST_GUEST)	+= arch/x86/lguest/
-
-# default subarch .h files
-mflags-y += -Iinclude/asm-x86/mach-default
-
-head-y := arch/x86/kernel/head_32.o arch/x86/kernel/init_task.o
-
-libs-y 					+= arch/x86/lib/
-core-y					+= arch/x86/kernel/ \
-					   arch/x86/mm/ \
-					   $(mcore-y)/ \
-					   arch/x86/crypto/
-drivers-$(CONFIG_MATH_EMULATION)	+= arch/x86/math-emu/
-drivers-$(CONFIG_PCI)			+= arch/x86/pci/
-# must be linked after kernel/
-drivers-$(CONFIG_OPROFILE)		+= arch/x86/oprofile/
-drivers-$(CONFIG_PM)			+= arch/x86/power/
-drivers-$(CONFIG_FB)                    += arch/x86/video/
-
-KBUILD_CFLAGS += $(mflags-y)
-KBUILD_AFLAGS += $(mflags-y)
-
-boot := arch/x86/boot
-
-PHONY += zImage bzImage compressed zlilo bzlilo \
-         zdisk bzdisk fdimage fdimage144 fdimage288 isoimage install
-
-all: bzImage
-
-# KBUILD_IMAGE specify target image being built
-                    KBUILD_IMAGE := $(boot)/bzImage
-zImage zlilo zdisk: KBUILD_IMAGE := arch/x86/boot/zImage
-
-zImage bzImage: vmlinux
-	$(Q)$(MAKE) $(build)=$(boot) $(KBUILD_IMAGE)
-	$(Q)mkdir -p $(objtree)/arch/i386/boot
-	$(Q)ln -fsn ../../x86/boot/bzImage $(objtree)/arch/i386/boot/bzImage
-
-compressed: zImage
-
-zlilo bzlilo: vmlinux
-	$(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(KBUILD_IMAGE) zlilo
-
-zdisk bzdisk: vmlinux
-	$(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(KBUILD_IMAGE) zdisk
-
-fdimage fdimage144 fdimage288 isoimage: vmlinux
-	$(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(KBUILD_IMAGE) $@
-
-install:
-	$(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(KBUILD_IMAGE) install
-
-archclean:
-	$(Q)rm -rf $(objtree)/arch/i386/boot
-	$(Q)$(MAKE) $(clean)=arch/x86/boot
-
-define archhelp
-  echo  '* bzImage	- Compressed kernel image (arch/x86/boot/bzImage)'
-  echo  '  install	- Install kernel using'
-  echo  '		   (your) ~/bin/installkernel or'
-  echo  '		   (distribution) /sbin/installkernel or'
-  echo  '		   install to $$(INSTALL_PATH) and run lilo'
-  echo  '  bzdisk       - Create a boot floppy in /dev/fd0'
-  echo  '  fdimage      - Create a boot floppy image'
-  echo  '  isoimage     - Create a boot CD-ROM image'
-endef
-
-CLEAN_FILES += arch/x86/boot/fdimage \
-	       arch/x86/boot/image.iso \
-	       arch/x86/boot/mtools.conf

arch/x86/Makefile_64

@@ -1,144 +0,0 @@
-#
-# x86_64 Makefile
-#
-# This file is included by the global makefile so that you can add your own
-# architecture-specific flags and dependencies. Remember to do have actions
-# for "archclean" and "archdep" for cleaning up and making dependencies for
-# this architecture
-#
-# This file is subject to the terms and conditions of the GNU General Public
-# License.  See the file "COPYING" in the main directory of this archive
-# for more details.
-#
-# Copyright (C) 1994 by Linus Torvalds
-#
-# 19990713  Artur Skawina <skawina@geocities.com>
-#           Added '-march' and '-mpreferred-stack-boundary' support
-# 20000913  Pavel Machek <pavel@suse.cz>
-#	    Converted for x86_64 architecture
-# 20010105  Andi Kleen, add IA32 compiler.
-#           ....and later removed it again....
-#
-# $Id: Makefile,v 1.31 2002/03/22 15:56:07 ak Exp $
-
-# BITS is used as extension for files which are available in a 32 bit
-# and a 64 bit version to simplify shared Makefiles.
-# e.g.: obj-y += foo_$(BITS).o
-BITS := 64
-export BITS
-
-LDFLAGS		:= -m elf_x86_64
-OBJCOPYFLAGS	:= -O binary -R .note -R .comment -S
-LDFLAGS_vmlinux :=
-CHECKFLAGS      += -D__x86_64__ -m64
-
-cflags-y	:=
-cflags-kernel-y	:=
-cflags-$(CONFIG_MK8) += $(call cc-option,-march=k8)
-cflags-$(CONFIG_MPSC) += $(call cc-option,-march=nocona)
-# gcc doesn't support -march=core2 yet as of gcc 4.3, but I hope it
-# will eventually. Use -mtune=generic as fallback
-cflags-$(CONFIG_MCORE2) += \
-	$(call cc-option,-march=core2,$(call cc-option,-mtune=generic))
-cflags-$(CONFIG_GENERIC_CPU) += $(call cc-option,-mtune=generic)
-
-cflags-y += -m64
-cflags-y += -mno-red-zone
-cflags-y += -mcmodel=kernel
-cflags-y += -pipe
-cflags-y += -Wno-sign-compare
-cflags-y += -fno-asynchronous-unwind-tables
-ifneq ($(CONFIG_DEBUG_INFO),y)
-# -fweb shrinks the kernel a bit, but the difference is very small
-# it also messes up debugging, so don't use it for now.
-#cflags-y += $(call cc-option,-fweb)
-endif
-# -funit-at-a-time shrinks the kernel .text considerably
-# unfortunately it makes reading oopses harder.
-cflags-y += $(call cc-option,-funit-at-a-time)
-# prevent gcc from generating any FP code by mistake
-cflags-y += $(call cc-option,-mno-sse -mno-mmx -mno-sse2 -mno-3dnow,)
-# this works around some issues with generating unwind tables in older gccs
-# newer gccs do it by default
-cflags-y += -maccumulate-outgoing-args
-
-# do binutils support CFI?
-cflags-y += $(call as-instr,.cfi_startproc\n.cfi_rel_offset rsp${comma}0\n.cfi_endproc,-DCONFIG_AS_CFI=1,)
-KBUILD_AFLAGS += $(call as-instr,.cfi_startproc\n.cfi_rel_offset rsp${comma}0\n.cfi_endproc,-DCONFIG_AS_CFI=1,)
-
-# is .cfi_signal_frame supported too?
-cflags-y += $(call as-instr,.cfi_startproc\n.cfi_signal_frame\n.cfi_endproc,-DCONFIG_AS_CFI_SIGNAL_FRAME=1,)
-KBUILD_AFLAGS += $(call as-instr,.cfi_startproc\n.cfi_signal_frame\n.cfi_endproc,-DCONFIG_AS_CFI_SIGNAL_FRAME=1,)
-
-cflags-$(CONFIG_CC_STACKPROTECTOR) += $(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-x86_64-has-stack-protector.sh "$(CC)" -fstack-protector )
-cflags-$(CONFIG_CC_STACKPROTECTOR_ALL) += $(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-x86_64-has-stack-protector.sh "$(CC)" -fstack-protector-all )
-
-KBUILD_CFLAGS += $(cflags-y)
-CFLAGS_KERNEL += $(cflags-kernel-y)
-KBUILD_AFLAGS += -m64
-
-head-y := arch/x86/kernel/head_64.o arch/x86/kernel/head64.o arch/x86/kernel/init_task.o
-
-libs-y 					+= arch/x86/lib/
-core-y					+= arch/x86/kernel/ \
-					   arch/x86/mm/ \
-					   arch/x86/crypto/ \
-					   arch/x86/vdso/
-core-$(CONFIG_IA32_EMULATION)		+= arch/x86/ia32/
-drivers-$(CONFIG_PCI)			+= arch/x86/pci/
-drivers-$(CONFIG_OPROFILE)		+= arch/x86/oprofile/
-
-boot := arch/x86/boot
-
-PHONY += bzImage bzlilo install archmrproper \
-	 fdimage fdimage144 fdimage288 isoimage archclean
-
-#Default target when executing "make"
-all: bzImage
-
-BOOTIMAGE                     := arch/x86/boot/bzImage
-KBUILD_IMAGE                  := $(BOOTIMAGE)
-
-bzImage: vmlinux
-	$(Q)$(MAKE) $(build)=$(boot) $(BOOTIMAGE)
-	$(Q)mkdir -p $(objtree)/arch/x86_64/boot
-	$(Q)ln -fsn ../../x86/boot/bzImage $(objtree)/arch/x86_64/boot/bzImage
-
-bzlilo: vmlinux
-	$(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(BOOTIMAGE) zlilo
-
-bzdisk: vmlinux
-	$(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(BOOTIMAGE) zdisk
-
-fdimage fdimage144 fdimage288 isoimage: vmlinux
-	$(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(BOOTIMAGE) $@
-
-install: vdso_install
-	$(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(BOOTIMAGE) $@ 
-
-vdso_install:
-ifeq ($(CONFIG_IA32_EMULATION),y)
-	$(Q)$(MAKE) $(build)=arch/x86/ia32 $@
-endif
-	$(Q)$(MAKE) $(build)=arch/x86/vdso $@
-
-archclean:
-	$(Q)rm -rf $(objtree)/arch/x86_64/boot
-	$(Q)$(MAKE) $(clean)=$(boot)
-
-define archhelp
-  echo  '* bzImage	- Compressed kernel image (arch/x86/boot/bzImage)'
-  echo  '  install	- Install kernel using'
-  echo  '		   (your) ~/bin/installkernel or'
-  echo  '		   (distribution) /sbin/installkernel or'
-  echo  '		   install to $$(INSTALL_PATH) and run lilo'
-  echo  '  bzdisk       - Create a boot floppy in /dev/fd0'
-  echo  '  fdimage      - Create a boot floppy image'
-  echo  '  isoimage     - Create a boot CD-ROM image'
-endef
-
-CLEAN_FILES += arch/x86/boot/fdimage \
-	       arch/x86/boot/image.iso \
-	       arch/x86/boot/mtools.conf
-
-

arch/x86/boot/Makefile

@@ -28,9 +28,11 @@ SVGA_MODE := -DSVGA_MODE=NORMAL_VGA
 targets		:= vmlinux.bin setup.bin setup.elf zImage bzImage
 subdir- 	:= compressed
 
-setup-y		+= a20.o apm.o cmdline.o copy.o cpu.o cpucheck.o edd.o
+setup-y		+= a20.o cmdline.o copy.o cpu.o cpucheck.o edd.o
 setup-y		+= header.o main.o mca.o memory.o pm.o pmjump.o
-setup-y		+= printf.o string.o tty.o video.o version.o voyager.o
+setup-y		+= printf.o string.o tty.o video.o version.o
+setup-$(CONFIG_X86_APM_BOOT) += apm.o
+setup-$(CONFIG_X86_VOYAGER) += voyager.o
 
 # The link order of the video-*.o modules can matter.  In particular,
 # video-vga.o *must* be listed first, followed by video-vesa.o.
@@ -49,10 +51,7 @@ HOSTCFLAGS_build.o := $(LINUXINCLUDE)
 
 # How to compile the 16-bit code.  Note we always compile for -march=i386,
 # that way we can complain to the user if the CPU is insufficient.
-cflags-$(CONFIG_X86_32) :=
-cflags-$(CONFIG_X86_64) := -m32
 KBUILD_CFLAGS	:= $(LINUXINCLUDE) -g -Os -D_SETUP -D__KERNEL__ \
-		   $(cflags-y) \
 		   -Wall -Wstrict-prototypes \
 		   -march=i386 -mregparm=3 \
 		   -include $(srctree)/$(src)/code16gcc.h \
@@ -62,6 +61,7 @@ KBUILD_CFLAGS	:= $(LINUXINCLUDE) -g -Os -D_SETUP -D__KERNEL__ \
 			$(call cc-option, -fno-unit-at-a-time)) \
 		   $(call cc-option, -fno-stack-protector) \
 		   $(call cc-option, -mpreferred-stack-boundary=2)
+KBUILD_CFLAGS +=   $(call cc-option,-m32)
 KBUILD_AFLAGS	:= $(KBUILD_CFLAGS) -D__ASSEMBLY__
 
 $(obj)/zImage:  IMAGE_OFFSET := 0x1000

arch/x86/boot/apm.c

@@ -19,8 +19,6 @@
 
 #include "boot.h"
 
-#if defined(CONFIG_APM) || defined(CONFIG_APM_MODULE)
-
 int query_apm_bios(void)
 {
 	u16 ax, bx, cx, dx, di;
@@ -95,4 +93,3 @@ int query_apm_bios(void)
 	return 0;
 }
 
-#endif

arch/x86/boot/boot.h

@@ -109,7 +109,7 @@ typedef unsigned int addr_t;
 static inline u8 rdfs8(addr_t addr)
 {
 	u8 v;
-	asm volatile("movb %%fs:%1,%0" : "=r" (v) : "m" (*(u8 *)addr));
+	asm volatile("movb %%fs:%1,%0" : "=q" (v) : "m" (*(u8 *)addr));
 	return v;
 }
 static inline u16 rdfs16(addr_t addr)
@@ -127,21 +127,21 @@ static inline u32 rdfs32(addr_t addr)
 
 static inline void wrfs8(u8 v, addr_t addr)
 {
-	asm volatile("movb %1,%%fs:%0" : "+m" (*(u8 *)addr) : "r" (v));
+	asm volatile("movb %1,%%fs:%0" : "+m" (*(u8 *)addr) : "qi" (v));
 }
 static inline void wrfs16(u16 v, addr_t addr)
 {
-	asm volatile("movw %1,%%fs:%0" : "+m" (*(u16 *)addr) : "r" (v));
+	asm volatile("movw %1,%%fs:%0" : "+m" (*(u16 *)addr) : "ri" (v));
 }
 static inline void wrfs32(u32 v, addr_t addr)
 {
-	asm volatile("movl %1,%%fs:%0" : "+m" (*(u32 *)addr) : "r" (v));
+	asm volatile("movl %1,%%fs:%0" : "+m" (*(u32 *)addr) : "ri" (v));
 }
 
 static inline u8 rdgs8(addr_t addr)
 {
 	u8 v;
-	asm volatile("movb %%gs:%1,%0" : "=r" (v) : "m" (*(u8 *)addr));
+	asm volatile("movb %%gs:%1,%0" : "=q" (v) : "m" (*(u8 *)addr));
 	return v;
 }
 static inline u16 rdgs16(addr_t addr)
@@ -159,15 +159,15 @@ static inline u32 rdgs32(addr_t addr)
 
 static inline void wrgs8(u8 v, addr_t addr)
 {
-	asm volatile("movb %1,%%gs:%0" : "+m" (*(u8 *)addr) : "r" (v));
+	asm volatile("movb %1,%%gs:%0" : "+m" (*(u8 *)addr) : "qi" (v));
 }
 static inline void wrgs16(u16 v, addr_t addr)
 {
-	asm volatile("movw %1,%%gs:%0" : "+m" (*(u16 *)addr) : "r" (v));
+	asm volatile("movw %1,%%gs:%0" : "+m" (*(u16 *)addr) : "ri" (v));
 }
 static inline void wrgs32(u32 v, addr_t addr)
 {
-	asm volatile("movl %1,%%gs:%0" : "+m" (*(u32 *)addr) : "r" (v));
+	asm volatile("movl %1,%%gs:%0" : "+m" (*(u32 *)addr) : "ri" (v));
 }
 
 /* Note: these only return true/false, not a signed return value! */
@@ -241,6 +241,7 @@ int query_apm_bios(void);
 
 /* cmdline.c */
 int cmdline_find_option(const char *option, char *buffer, int bufsize);
+int cmdline_find_option_bool(const char *option);
 
 /* cpu.c, cpucheck.c */
 int check_cpu(int *cpu_level_ptr, int *req_level_ptr, u32 **err_flags_ptr);

arch/x86/boot/cmdline.c

@@ -95,3 +95,68 @@ int cmdline_find_option(const char *option, char *buffer, int bufsize)
 
 	return len;
 }
+
+/*
+ * Find a boolean option (like quiet,noapic,nosmp....)
+ *
+ * Returns the position of that option (starts counting with 1)
+ * or 0 on not found
+ */
+int cmdline_find_option_bool(const char *option)
+{
+	u32 cmdline_ptr = boot_params.hdr.cmd_line_ptr;
+	addr_t cptr;
+	char c;
+	int pos = 0, wstart = 0;
+	const char *opptr = NULL;
+	enum {
+		st_wordstart,	/* Start of word/after whitespace */
+		st_wordcmp,	/* Comparing this word */
+		st_wordskip,	/* Miscompare, skip */
+	} state = st_wordstart;
+
+	if (!cmdline_ptr || cmdline_ptr >= 0x100000)
+		return -1;	/* No command line, or inaccessible */
+
+	cptr = cmdline_ptr & 0xf;
+	set_fs(cmdline_ptr >> 4);
+
+	while (cptr < 0x10000) {
+		c = rdfs8(cptr++);
+		pos++;
+
+		switch (state) {
+		case st_wordstart:
+			if (!c)
+				return 0;
+			else if (myisspace(c))
+				break;
+
+			state = st_wordcmp;
+			opptr = option;
+			wstart = pos;
+			/* fall through */
+
+		case st_wordcmp:
+			if (!*opptr)
+				if (!c || myisspace(c))
+					return wstart;
+				else
+					state = st_wordskip;
+			else if (!c)
+				return 0;
+			else if (c != *opptr++)
+				state = st_wordskip;
+			break;
+
+		case st_wordskip:
+			if (!c)
+				return 0;
+			else if (myisspace(c))
+				state = st_wordstart;
+			break;
+		}
+	}
+
+	return 0;	/* Buffer overrun */
+}

arch/x86/boot/compressed/Makefile

@@ -1,5 +1,63 @@
+#
+# linux/arch/x86/boot/compressed/Makefile
+#
+# create a compressed vmlinux image from the original vmlinux
+#
+
+targets := vmlinux vmlinux.bin vmlinux.bin.gz head_$(BITS).o misc.o piggy.o
+
+KBUILD_CFLAGS := -m$(BITS) -D__KERNEL__ $(LINUX_INCLUDE) -O2
+KBUILD_CFLAGS += -fno-strict-aliasing -fPIC
+cflags-$(CONFIG_X86_64) := -mcmodel=small
+KBUILD_CFLAGS += $(cflags-y)
+KBUILD_CFLAGS += $(call cc-option,-ffreestanding)
+KBUILD_CFLAGS += $(call cc-option,-fno-stack-protector)
+
+KBUILD_AFLAGS  := $(KBUILD_CFLAGS) -D__ASSEMBLY__
+
+LDFLAGS := -m elf_$(UTS_MACHINE)
+LDFLAGS_vmlinux := -T
+
+$(obj)/vmlinux: $(src)/vmlinux_$(BITS).lds $(obj)/head_$(BITS).o $(obj)/misc.o $(obj)/piggy.o FORCE
+	$(call if_changed,ld)
+	@:
+
+$(obj)/vmlinux.bin: vmlinux FORCE
+	$(call if_changed,objcopy)
+
+
 ifeq ($(CONFIG_X86_32),y)
-include ${srctree}/arch/x86/boot/compressed/Makefile_32
+targets += vmlinux.bin.all vmlinux.relocs
+hostprogs-y := relocs
+
+quiet_cmd_relocs = RELOCS  $@
+      cmd_relocs = $(obj)/relocs $< > $@;$(obj)/relocs --abs-relocs $<
+$(obj)/vmlinux.relocs: vmlinux $(obj)/relocs FORCE
+	$(call if_changed,relocs)
+
+vmlinux.bin.all-y := $(obj)/vmlinux.bin
+vmlinux.bin.all-$(CONFIG_RELOCATABLE) += $(obj)/vmlinux.relocs
+quiet_cmd_relocbin = BUILD   $@
+      cmd_relocbin = cat $(filter-out FORCE,$^) > $@
+$(obj)/vmlinux.bin.all: $(vmlinux.bin.all-y) FORCE
+	$(call if_changed,relocbin)
+
+ifdef CONFIG_RELOCATABLE
+$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin.all FORCE
+	$(call if_changed,gzip)
 else
-include ${srctree}/arch/x86/boot/compressed/Makefile_64
+$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
+	$(call if_changed,gzip)
 endif
+LDFLAGS_piggy.o := -r --format binary --oformat elf32-i386 -T
+
+else
+$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
+	$(call if_changed,gzip)
+
+LDFLAGS_piggy.o := -r --format binary --oformat elf64-x86-64 -T
+endif
+
+
+$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.gz FORCE
+	$(call if_changed,ld)

arch/x86/boot/compressed/Makefile_32

@@ -1,50 +0,0 @@
-#
-# linux/arch/x86/boot/compressed/Makefile
-#
-# create a compressed vmlinux image from the original vmlinux
-#
-
-targets		:= vmlinux vmlinux.bin vmlinux.bin.gz head_32.o misc_32.o piggy.o \
-			vmlinux.bin.all vmlinux.relocs
-EXTRA_AFLAGS	:= -traditional
-
-LDFLAGS_vmlinux := -T
-hostprogs-y	:= relocs
-
-KBUILD_CFLAGS  := -m32 -D__KERNEL__ $(LINUX_INCLUDE) -O2 \
-	   -fno-strict-aliasing -fPIC \
-	   $(call cc-option,-ffreestanding) \
-	   $(call cc-option,-fno-stack-protector)
-LDFLAGS := -m elf_i386
-
-$(obj)/vmlinux: $(src)/vmlinux_32.lds $(obj)/head_32.o $(obj)/misc_32.o $(obj)/piggy.o FORCE
-	$(call if_changed,ld)
-	@:
-
-$(obj)/vmlinux.bin: vmlinux FORCE
-	$(call if_changed,objcopy)
-
-quiet_cmd_relocs = RELOCS  $@
-      cmd_relocs = $(obj)/relocs $< > $@;$(obj)/relocs --abs-relocs $<
-$(obj)/vmlinux.relocs: vmlinux $(obj)/relocs FORCE
-	$(call if_changed,relocs)
-
-vmlinux.bin.all-y := $(obj)/vmlinux.bin
-vmlinux.bin.all-$(CONFIG_RELOCATABLE) += $(obj)/vmlinux.relocs
-quiet_cmd_relocbin = BUILD   $@
-      cmd_relocbin = cat $(filter-out FORCE,$^) > $@
-$(obj)/vmlinux.bin.all: $(vmlinux.bin.all-y) FORCE
-	$(call if_changed,relocbin)
-
-ifdef CONFIG_RELOCATABLE
-$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin.all FORCE
-	$(call if_changed,gzip)
-else
-$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
-	$(call if_changed,gzip)
-endif
-
-LDFLAGS_piggy.o := -r --format binary --oformat elf32-i386 -T
-
-$(obj)/piggy.o: $(src)/vmlinux_32.scr $(obj)/vmlinux.bin.gz FORCE
-	$(call if_changed,ld)

arch/x86/boot/compressed/Makefile_64

@@ -1,30 +0,0 @@
-#
-# linux/arch/x86/boot/compressed/Makefile
-#
-# create a compressed vmlinux image from the original vmlinux
-#
-
-targets		:= vmlinux vmlinux.bin vmlinux.bin.gz head_64.o misc_64.o piggy.o
-
-KBUILD_CFLAGS := -m64 -D__KERNEL__ $(LINUXINCLUDE) -O2  \
-	  -fno-strict-aliasing -fPIC -mcmodel=small \
-	   $(call cc-option, -ffreestanding) \
-	   $(call cc-option, -fno-stack-protector)
-KBUILD_AFLAGS  := $(KBUILD_CFLAGS) -D__ASSEMBLY__
-LDFLAGS := -m elf_x86_64
-
-LDFLAGS_vmlinux := -T
-$(obj)/vmlinux: $(src)/vmlinux_64.lds $(obj)/head_64.o $(obj)/misc_64.o $(obj)/piggy.o FORCE
-	$(call if_changed,ld)
-	@:
-
-$(obj)/vmlinux.bin: vmlinux FORCE
-	$(call if_changed,objcopy)
-
-$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
-	$(call if_changed,gzip)
-
-LDFLAGS_piggy.o := -r --format binary --oformat elf64-x86-64 -T
-
-$(obj)/piggy.o: $(obj)/vmlinux_64.scr $(obj)/vmlinux.bin.gz FORCE
-	$(call if_changed,ld)

arch/x86/boot/compressed/misc_32.c → arch/x86/boot/compressed/misc.c

@@ -1,7 +1,7 @@
 /*
  * misc.c
- * 
- * This is a collection of several routines from gzip-1.0.3 
+ *
+ * This is a collection of several routines from gzip-1.0.3
  * adapted for Linux.
  *
  * malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994
@@ -9,9 +9,18 @@
  * High loaded stuff by Hans Lermen & Werner Almesberger, Feb. 1996
  */
 
+/*
+ * we have to be careful, because no indirections are allowed here, and
+ * paravirt_ops is a kind of one. As it will only run in baremetal anyway,
+ * we just keep it from happening
+ */
 #undef CONFIG_PARAVIRT
+#ifdef CONFIG_X86_64
+#define _LINUX_STRING_H_ 1
+#define __LINUX_BITMAP_H 1
+#endif
+
 #include <linux/linkage.h>
-#include <linux/vmalloc.h>
 #include <linux/screen_info.h>
 #include <asm/io.h>
 #include <asm/page.h>
@@ -186,10 +195,20 @@ static void *memcpy(void *dest, const void *src, unsigned n);
 
 static void putstr(const char *);
 
-static unsigned long free_mem_ptr;
-static unsigned long free_mem_end_ptr;
+#ifdef CONFIG_X86_64
+#define memptr long
+#else
+#define memptr unsigned
+#endif
+
+static memptr free_mem_ptr;
+static memptr free_mem_end_ptr;
 
+#ifdef CONFIG_X86_64
+#define HEAP_SIZE             0x7000
+#else
 #define HEAP_SIZE             0x4000
+#endif
 
 static char *vidmem = (char *)0xb8000;
 static int vidport;
@@ -230,7 +249,7 @@ static void gzip_mark(void **ptr)
 
 static void gzip_release(void **ptr)
 {
-	free_mem_ptr = (unsigned long) *ptr;
+	free_mem_ptr = (memptr) *ptr;
 }
  
 static void scroll(void)
@@ -247,8 +266,10 @@ static void putstr(const char *s)
 	int x,y,pos;
 	char c;
 
+#ifdef CONFIG_X86_32
 	if (RM_SCREEN_INFO.orig_video_mode == 0 && lines == 0 && cols == 0)
 		return;
+#endif
 
 	x = RM_SCREEN_INFO.orig_x;
 	y = RM_SCREEN_INFO.orig_y;
@@ -261,7 +282,7 @@ static void putstr(const char *s)
 				y--;
 			}
 		} else {
-			vidmem [ ( x + cols * y ) * 2 ] = c;
+			vidmem [(x + cols * y) * 2] = c;
 			if ( ++x >= cols ) {
 				x = 0;
 				if ( ++y >= lines ) {
@@ -276,16 +297,16 @@ static void putstr(const char *s)
 	RM_SCREEN_INFO.orig_y = y;
 
 	pos = (x + cols * y) * 2;	/* Update cursor position */
-	outb_p(14, vidport);
-	outb_p(0xff & (pos >> 9), vidport+1);
-	outb_p(15, vidport);
-	outb_p(0xff & (pos >> 1), vidport+1);
+	outb(14, vidport);
+	outb(0xff & (pos >> 9), vidport+1);
+	outb(15, vidport);
+	outb(0xff & (pos >> 1), vidport+1);
 }
 
 static void* memset(void* s, int c, unsigned n)
 {
 	int i;
-	char *ss = (char*)s;
+	char *ss = s;
 
 	for (i=0;i<n;i++) ss[i] = c;
 	return s;
@@ -294,7 +315,8 @@ static void* memset(void* s, int c, unsigned n)
 static void* memcpy(void* dest, const void* src, unsigned n)
 {
 	int i;
-	char *d = (char *)dest, *s = (char *)src;
+	const char *s = src;
+	char *d = dest;
 
 	for (i=0;i<n;i++) d[i] = s[i];
 	return dest;
@@ -339,11 +361,13 @@ static void error(char *x)
 	putstr(x);
 	putstr("\n\n -- System halted");
 
-	while(1);	/* Halt */
+	while (1)
+		asm("hlt");
 }
 
-asmlinkage void decompress_kernel(void *rmode, unsigned long end,
-			uch *input_data, unsigned long input_len, uch *output)
+asmlinkage void decompress_kernel(void *rmode, memptr heap,
+				  uch *input_data, unsigned long input_len,
+				  uch *output)
 {
 	real_mode = rmode;
 
@@ -358,25 +382,32 @@ asmlinkage void decompress_kernel(void *rmode, unsigned long end,
 	lines = RM_SCREEN_INFO.orig_video_lines;
 	cols = RM_SCREEN_INFO.orig_video_cols;
 
-	window = output;  	/* Output buffer (Normally at 1M) */
-	free_mem_ptr     = end;	/* Heap  */
-	free_mem_end_ptr = end + HEAP_SIZE;
-	inbuf  = input_data;	/* Input buffer */
+	window = output;		/* Output buffer (Normally at 1M) */
+	free_mem_ptr     = heap;	/* Heap */
+	free_mem_end_ptr = heap + HEAP_SIZE;
+	inbuf  = input_data;		/* Input buffer */
 	insize = input_len;
 	inptr  = 0;
 
+#ifdef CONFIG_X86_64
+	if ((ulg)output & (__KERNEL_ALIGN - 1))
+		error("Destination address not 2M aligned");
+	if ((ulg)output >= 0xffffffffffUL)
+		error("Destination address too large");
+#else
 	if ((u32)output & (CONFIG_PHYSICAL_ALIGN -1))
 		error("Destination address not CONFIG_PHYSICAL_ALIGN aligned");
-	if (end > ((-__PAGE_OFFSET-(512 <<20)-1) & 0x7fffffff))
+	if (heap > ((-__PAGE_OFFSET-(512<<20)-1) & 0x7fffffff))
 		error("Destination address too large");
 #ifndef CONFIG_RELOCATABLE
 	if ((u32)output != LOAD_PHYSICAL_ADDR)
 		error("Wrong destination address");
+#endif
 #endif
 
 	makecrc();
-	putstr("Uncompressing Linux... ");
+	putstr("\nDecompressing Linux... ");
 	gunzip();
-	putstr("Ok, booting the kernel.\n");
+	putstr("done.\nBooting the kernel.\n");
 	return;
 }

arch/x86/boot/compressed/misc_64.c

@@ -1,371 +0,0 @@
-/*
- * misc.c
- * 
- * This is a collection of several routines from gzip-1.0.3 
- * adapted for Linux.
- *
- * malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994
- * puts by Nick Holloway 1993, better puts by Martin Mares 1995
- * High loaded stuff by Hans Lermen & Werner Almesberger, Feb. 1996
- */
-
-#define _LINUX_STRING_H_ 1
-#define __LINUX_BITMAP_H 1
-
-#include <linux/linkage.h>
-#include <linux/screen_info.h>
-#include <asm/io.h>
-#include <asm/page.h>
-
-/* WARNING!!
- * This code is compiled with -fPIC and it is relocated dynamically
- * at run time, but no relocation processing is performed.
- * This means that it is not safe to place pointers in static structures.
- */
-
-/*
- * Getting to provable safe in place decompression is hard.
- * Worst case behaviours need to be analyzed.
- * Background information:
- *
- * The file layout is:
- *    magic[2]
- *    method[1]
- *    flags[1]
- *    timestamp[4]
- *    extraflags[1]
- *    os[1]
- *    compressed data blocks[N]
- *    crc[4] orig_len[4]
- *
- * resulting in 18 bytes of non compressed data overhead.
- *
- * Files divided into blocks
- * 1 bit (last block flag)
- * 2 bits (block type)
- *
- * 1 block occurs every 32K -1 bytes or when there 50% compression has been achieved.
- * The smallest block type encoding is always used.
- *
- * stored:
- *    32 bits length in bytes.
- *
- * fixed:
- *    magic fixed tree.
- *    symbols.
- *
- * dynamic:
- *    dynamic tree encoding.
- *    symbols.
- *
- *
- * The buffer for decompression in place is the length of the
- * uncompressed data, plus a small amount extra to keep the algorithm safe.
- * The compressed data is placed at the end of the buffer.  The output
- * pointer is placed at the start of the buffer and the input pointer
- * is placed where the compressed data starts.  Problems will occur
- * when the output pointer overruns the input pointer.
- *
- * The output pointer can only overrun the input pointer if the input
- * pointer is moving faster than the output pointer.  A condition only
- * triggered by data whose compressed form is larger than the uncompressed
- * form.
- *
- * The worst case at the block level is a growth of the compressed data
- * of 5 bytes per 32767 bytes.
- *
- * The worst case internal to a compressed block is very hard to figure.
- * The worst case can at least be boundined by having one bit that represents
- * 32764 bytes and then all of the rest of the bytes representing the very
- * very last byte.
- *
- * All of which is enough to compute an amount of extra data that is required
- * to be safe.  To avoid problems at the block level allocating 5 extra bytes
- * per 32767 bytes of data is sufficient.  To avoind problems internal to a block
- * adding an extra 32767 bytes (the worst case uncompressed block size) is
- * sufficient, to ensure that in the worst case the decompressed data for
- * block will stop the byte before the compressed data for a block begins.
- * To avoid problems with the compressed data's meta information an extra 18
- * bytes are needed.  Leading to the formula:
- *
- * extra_bytes = (uncompressed_size >> 12) + 32768 + 18 + decompressor_size.
- *
- * Adding 8 bytes per 32K is a bit excessive but much easier to calculate.
- * Adding 32768 instead of 32767 just makes for round numbers.
- * Adding the decompressor_size is necessary as it musht live after all
- * of the data as well.  Last I measured the decompressor is about 14K.
- * 10K of actual data and 4K of bss.
- *
- */
-
-/*
- * gzip declarations
- */
-
-#define OF(args)  args
-#define STATIC static
-
-#undef memset
-#undef memcpy
-#define memzero(s, n)     memset ((s), 0, (n))
-
-typedef unsigned char  uch;
-typedef unsigned short ush;
-typedef unsigned long  ulg;
-
-#define WSIZE 0x80000000	/* Window size must be at least 32k,
-				 * and a power of two
-				 * We don't actually have a window just
-				 * a huge output buffer so I report
-				 * a 2G windows size, as that should
-				 * always be larger than our output buffer.
-				 */
-
-static uch *inbuf;	/* input buffer */
-static uch *window;	/* Sliding window buffer, (and final output buffer) */
-
-static unsigned insize;  /* valid bytes in inbuf */
-static unsigned inptr;   /* index of next byte to be processed in inbuf */
-static unsigned outcnt;  /* bytes in output buffer */
-
-/* gzip flag byte */
-#define ASCII_FLAG   0x01 /* bit 0 set: file probably ASCII text */
-#define CONTINUATION 0x02 /* bit 1 set: continuation of multi-part gzip file */
-#define EXTRA_FIELD  0x04 /* bit 2 set: extra field present */
-#define ORIG_NAME    0x08 /* bit 3 set: original file name present */
-#define COMMENT      0x10 /* bit 4 set: file comment present */
-#define ENCRYPTED    0x20 /* bit 5 set: file is encrypted */
-#define RESERVED     0xC0 /* bit 6,7:   reserved */
-
-#define get_byte()  (inptr < insize ? inbuf[inptr++] : fill_inbuf())
-		
-/* Diagnostic functions */
-#ifdef DEBUG
-#  define Assert(cond,msg) {if(!(cond)) error(msg);}
-#  define Trace(x) fprintf x
-#  define Tracev(x) {if (verbose) fprintf x ;}
-#  define Tracevv(x) {if (verbose>1) fprintf x ;}
-#  define Tracec(c,x) {if (verbose && (c)) fprintf x ;}
-#  define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;}
-#else
-#  define Assert(cond,msg)
-#  define Trace(x)
-#  define Tracev(x)
-#  define Tracevv(x)
-#  define Tracec(c,x)
-#  define Tracecv(c,x)
-#endif
-
-static int  fill_inbuf(void);
-static void flush_window(void);
-static void error(char *m);
-static void gzip_mark(void **);
-static void gzip_release(void **);
-  
-/*
- * This is set up by the setup-routine at boot-time
- */
-static unsigned char *real_mode; /* Pointer to real-mode data */
-
-#define RM_EXT_MEM_K   (*(unsigned short *)(real_mode + 0x2))
-#ifndef STANDARD_MEMORY_BIOS_CALL
-#define RM_ALT_MEM_K   (*(unsigned long *)(real_mode + 0x1e0))
-#endif
-#define RM_SCREEN_INFO (*(struct screen_info *)(real_mode+0))
-
-extern unsigned char input_data[];
-extern int input_len;
-
-static long bytes_out = 0;
-
-static void *malloc(int size);
-static void free(void *where);
-
-static void *memset(void *s, int c, unsigned n);
-static void *memcpy(void *dest, const void *src, unsigned n);
-
-static void putstr(const char *);
-
-static long free_mem_ptr;
-static long free_mem_end_ptr;
-
-#define HEAP_SIZE             0x7000
-
-static char *vidmem = (char *)0xb8000;
-static int vidport;
-static int lines, cols;
-
-#include "../../../../lib/inflate.c"
-
-static void *malloc(int size)
-{
-	void *p;
-
-	if (size <0) error("Malloc error");
-	if (free_mem_ptr <= 0) error("Memory error");
-
-	free_mem_ptr = (free_mem_ptr + 3) & ~3;	/* Align */
-
-	p = (void *)free_mem_ptr;
-	free_mem_ptr += size;
-
-	if (free_mem_ptr >= free_mem_end_ptr)
-		error("Out of memory");
-
-	return p;
-}
-
-static void free(void *where)
-{	/* Don't care */
-}
-
-static void gzip_mark(void **ptr)
-{
-	*ptr = (void *) free_mem_ptr;
-}
-
-static void gzip_release(void **ptr)
-{
-	free_mem_ptr = (long) *ptr;
-}
- 
-static void scroll(void)
-{
-	int i;
-
-	memcpy ( vidmem, vidmem + cols * 2, ( lines - 1 ) * cols * 2 );
-	for ( i = ( lines - 1 ) * cols * 2; i < lines * cols * 2; i += 2 )
-		vidmem[i] = ' ';
-}
-
-static void putstr(const char *s)
-{
-	int x,y,pos;
-	char c;
-
-	x = RM_SCREEN_INFO.orig_x;
-	y = RM_SCREEN_INFO.orig_y;
-
-	while ( ( c = *s++ ) != '\0' ) {
-		if ( c == '\n' ) {
-			x = 0;
-			if ( ++y >= lines ) {
-				scroll();
-				y--;
-			}
-		} else {
-			vidmem [ ( x + cols * y ) * 2 ] = c; 
-			if ( ++x >= cols ) {
-				x = 0;
-				if ( ++y >= lines ) {
-					scroll();
-					y--;
-				}
-			}
-		}
-	}
-
-	RM_SCREEN_INFO.orig_x = x;
-	RM_SCREEN_INFO.orig_y = y;
-
-	pos = (x + cols * y) * 2;	/* Update cursor position */
-	outb_p(14, vidport);
-	outb_p(0xff & (pos >> 9), vidport+1);
-	outb_p(15, vidport);
-	outb_p(0xff & (pos >> 1), vidport+1);
-}
-
-static void* memset(void* s, int c, unsigned n)
-{
-	int i;
-	char *ss = (char*)s;
-
-	for (i=0;i<n;i++) ss[i] = c;
-	return s;
-}
-
-static void* memcpy(void* dest, const void* src, unsigned n)
-{
-	int i;
-	char *d = (char *)dest, *s = (char *)src;
-
-	for (i=0;i<n;i++) d[i] = s[i];
-	return dest;
-}
-
-/* ===========================================================================
- * Fill the input buffer. This is called only when the buffer is empty
- * and at least one byte is really needed.
- */
-static int fill_inbuf(void)
-{
-	error("ran out of input data");
-	return 0;
-}
-
-/* ===========================================================================
- * Write the output window window[0..outcnt-1] and update crc and bytes_out.
- * (Used for the decompressed data only.)
- */
-static void flush_window(void)
-{
-	/* With my window equal to my output buffer
-	 * I only need to compute the crc here.
-	 */
-	ulg c = crc;         /* temporary variable */
-	unsigned n;
-	uch *in, ch;
-
-	in = window;
-	for (n = 0; n < outcnt; n++) {
-		ch = *in++;
-		c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
-	}
-	crc = c;
-	bytes_out += (ulg)outcnt;
-	outcnt = 0;
-}
-
-static void error(char *x)
-{
-	putstr("\n\n");
-	putstr(x);
-	putstr("\n\n -- System halted");
-
-	while(1);	/* Halt */
-}
-
-asmlinkage void decompress_kernel(void *rmode, unsigned long heap,
-	uch *input_data, unsigned long input_len, uch *output)
-{
-	real_mode = rmode;
-
-	if (RM_SCREEN_INFO.orig_video_mode == 7) {
-		vidmem = (char *) 0xb0000;
-		vidport = 0x3b4;
-	} else {
-		vidmem = (char *) 0xb8000;
-		vidport = 0x3d4;
-	}
-
-	lines = RM_SCREEN_INFO.orig_video_lines;
-	cols = RM_SCREEN_INFO.orig_video_cols;
-
-	window = output;  		/* Output buffer (Normally at 1M) */
-	free_mem_ptr     = heap;	/* Heap  */
-	free_mem_end_ptr = heap + HEAP_SIZE;
-	inbuf  = input_data;		/* Input buffer */
-	insize = input_len;
-	inptr  = 0;
-
-	if ((ulg)output & (__KERNEL_ALIGN - 1))
-		error("Destination address not 2M aligned");
-	if ((ulg)output >= 0xffffffffffUL)
-		error("Destination address too large");
-
-	makecrc();
-	putstr(".\nDecompressing Linux...");
-	gunzip();
-	putstr("done.\nBooting the kernel.\n");
-	return;
-}

arch/x86/boot/compressed/relocs.c

@@ -27,11 +27,6 @@ static unsigned long *relocs;
  * absolute relocations present w.r.t these symbols.
  */
 static const char* safe_abs_relocs[] = {
-		"__kernel_vsyscall",
-		"__kernel_rt_sigreturn",
-		"__kernel_sigreturn",
-		"SYSENTER_RETURN",
-		"VDSO_NOTE_MASK",
 		"xen_irq_disable_direct_reloc",
 		"xen_save_fl_direct_reloc",
 };
@@ -45,6 +40,8 @@ static int is_safe_abs_reloc(const char* sym_name)
 			/* Match found */
 			return 1;
 	}
+	if (strncmp(sym_name, "VDSO", 4) == 0)
+		return 1;
 	if (strncmp(sym_name, "__crc_", 6) == 0)
 		return 1;
 	return 0;

arch/x86/boot/compressed/vmlinux_64.scr → arch/x86/boot/compressed/vmlinux.scr

@@ -1,6 +1,6 @@
 SECTIONS
 {
-  .text.compressed : {
+  .rodata.compressed : {
 	input_len = .;
 	LONG(input_data_end - input_data) input_data = .;
 	*(.data)

arch/x86/boot/compressed/vmlinux_32.lds

@@ -3,17 +3,17 @@ OUTPUT_ARCH(i386)
 ENTRY(startup_32)
 SECTIONS
 {
-        /* Be careful parts of head.S assume startup_32 is at
-         * address 0.
+	/* Be careful parts of head_32.S assume startup_32 is at
+	 * address 0.
 	 */
-	. =  0 	;
+	. = 0;
 	.text.head : {
 		_head = . ;
 		*(.text.head)
 		_ehead = . ;
 	}
-	.data.compressed : {
-		*(.data.compressed)
+	.rodata.compressed : {
+		*(.rodata.compressed)
 	}
 	.text :	{
 		_text = .; 	/* Text */

arch/x86/boot/compressed/vmlinux_32.scr

@@ -1,10 +0,0 @@
-SECTIONS
-{
-  .data.compressed : {
-	input_len = .;
-	LONG(input_data_end - input_data) input_data = .; 
-	*(.data) 
-	output_len = . - 4;
-	input_data_end = .; 
-	}
-}

arch/x86/boot/compressed/vmlinux_64.lds

@@ -3,15 +3,19 @@ OUTPUT_ARCH(i386:x86-64)
 ENTRY(startup_64)
 SECTIONS
 {
-	/* Be careful parts of head.S assume startup_32 is at
- 	 * address 0.
+	/* Be careful parts of head_64.S assume startup_64 is at
+	 * address 0.
 	 */
 	. = 0;
-	.text :	{
+	.text.head : {
 		_head = . ;
 		*(.text.head)
 		_ehead = . ;
-		*(.text.compressed)
+	}
+	.rodata.compressed : {
+		*(.rodata.compressed)
+	}
+	.text :	{
 		_text = .; 	/* Text */
 		*(.text)
 		*(.text.*)

arch/x86/boot/edd.c

@@ -129,6 +129,7 @@ void query_edd(void)
 	char eddarg[8];
 	int do_mbr = 1;
 	int do_edd = 1;
+	int be_quiet;
 	int devno;
 	struct edd_info ei, *edp;
 	u32 *mbrptr;
@@ -140,12 +141,21 @@ void query_edd(void)
 			do_edd = 0;
 	}
 
+	be_quiet = cmdline_find_option_bool("quiet");
+
 	edp    = boot_params.eddbuf;
 	mbrptr = boot_params.edd_mbr_sig_buffer;
 
 	if (!do_edd)
 		return;
 
+	/* Bugs in OnBoard or AddOnCards Bios may hang the EDD probe,
+	 * so give a hint if this happens.
+	 */
+
+	if (!be_quiet)
+		printf("Probing EDD (edd=off to disable)... ");
+
 	for (devno = 0x80; devno < 0x80+EDD_MBR_SIG_MAX; devno++) {
 		/*
 		 * Scan the BIOS-supported hard disks and query EDD
@@ -162,6 +172,9 @@ void query_edd(void)
 		if (do_mbr && !read_mbr_sig(devno, &ei, mbrptr++))
 			boot_params.edd_mbr_sig_buf_entries = devno-0x80+1;
 	}
+
+	if (!be_quiet)
+		printf("ok\n");
 }
 
 #endif

arch/x86/boot/header.S

@@ -195,10 +195,13 @@ cmd_line_ptr:	.long	0		# (Header version 0x0202 or later)
 					# can be located anywhere in
 					# low memory 0x10000 or higher.
 
-ramdisk_max:	.long (-__PAGE_OFFSET-(512 << 20)-1) & 0x7fffffff
+ramdisk_max:	.long 0x7fffffff
 					# (Header version 0x0203 or later)
 					# The highest safe address for
 					# the contents of an initrd
+					# The current kernel allows up to 4 GB,
+					# but leave it at 2 GB to avoid
+					# possible bootloader bugs.
 
 kernel_alignment:  .long CONFIG_PHYSICAL_ALIGN	#physical addr alignment
 						#required for protected mode

arch/x86/boot/main.c

@@ -100,20 +100,32 @@ static void set_bios_mode(void)
 #endif
 }
 
-void main(void)
+static void init_heap(void)
 {
-	/* First, copy the boot header into the "zeropage" */
-	copy_boot_params();
+	char *stack_end;
 
-	/* End of heap check */
 	if (boot_params.hdr.loadflags & CAN_USE_HEAP) {
-		heap_end = (char *)(boot_params.hdr.heap_end_ptr
-				    +0x200-STACK_SIZE);
+		asm("leal %P1(%%esp),%0"
+		    : "=r" (stack_end) : "i" (-STACK_SIZE));
+
+		heap_end = (char *)
+			((size_t)boot_params.hdr.heap_end_ptr + 0x200);
+		if (heap_end > stack_end)
+			heap_end = stack_end;
 	} else {
 		/* Boot protocol 2.00 only, no heap available */
 		puts("WARNING: Ancient bootloader, some functionality "
 		     "may be limited!\n");
 	}
+}
+
+void main(void)
+{
+	/* First, copy the boot header into the "zeropage" */
+	copy_boot_params();
+
+	/* End of heap check */
+	init_heap();
 
 	/* Make sure we have all the proper CPU support */
 	if (validate_cpu()) {
@@ -131,9 +143,6 @@ void main(void)
 	/* Set keyboard repeat rate (why?) */
 	keyboard_set_repeat();
 
-	/* Set the video mode */
-	set_video();
-
 	/* Query MCA information */
 	query_mca();
 
@@ -154,6 +163,10 @@ void main(void)
 #if defined(CONFIG_EDD) || defined(CONFIG_EDD_MODULE)
 	query_edd();
 #endif
+
+	/* Set the video mode */
+	set_video();
+
 	/* Do the last things and invoke protected mode */
 	go_to_protected_mode();
 }

arch/x86/boot/pm.c

@@ -104,7 +104,7 @@ static void reset_coprocessor(void)
 	(((u64)(base & 0xff000000) << 32) |	\
 	 ((u64)flags << 40) |			\
 	 ((u64)(limit & 0x00ff0000) << 32) |	\
-	 ((u64)(base & 0x00ffff00) << 16) |	\
+	 ((u64)(base & 0x00ffffff) << 16) |	\
 	 ((u64)(limit & 0x0000ffff)))
 
 struct gdt_ptr {
@@ -121,6 +121,10 @@ static void setup_gdt(void)
 		[GDT_ENTRY_BOOT_CS] = GDT_ENTRY(0xc09b, 0, 0xfffff),
 		/* DS: data, read/write, 4 GB, base 0 */
 		[GDT_ENTRY_BOOT_DS] = GDT_ENTRY(0xc093, 0, 0xfffff),
+		/* TSS: 32-bit tss, 104 bytes, base 4096 */
+		/* We only have a TSS here to keep Intel VT happy;
+		   we don't actually use it for anything. */
+		[GDT_ENTRY_BOOT_TSS] = GDT_ENTRY(0x0089, 4096, 103),
 	};
 	/* Xen HVM incorrectly stores a pointer to the gdt_ptr, instead
 	   of the gdt_ptr contents.  Thus, make it static so it will

arch/x86/boot/pmjump.S

@@ -15,6 +15,7 @@
  */
 
 #include <asm/boot.h>
+#include <asm/processor-flags.h>
 #include <asm/segment.h>
 
 	.text
@@ -29,28 +30,55 @@
  */
 protected_mode_jump:
 	movl	%edx, %esi		# Pointer to boot_params table
-	movl	%eax, 2f		# Patch ljmpl instruction
+
+	xorl	%ebx, %ebx
+	movw	%cs, %bx
+	shll	$4, %ebx
+	addl	%ebx, 2f
 
 	movw	$__BOOT_DS, %cx
-	xorl	%ebx, %ebx		# Per the 32-bit boot protocol
-	xorl	%ebp, %ebp		# Per the 32-bit boot protocol
-	xorl	%edi, %edi		# Per the 32-bit boot protocol
+	movw	$__BOOT_TSS, %di
 
 	movl	%cr0, %edx
-	orb	$1, %dl			# Protected mode (PE) bit
+	orb	$X86_CR0_PE, %dl	# Protected mode
 	movl	%edx, %cr0
 	jmp	1f			# Short jump to serialize on 386/486
 1:
 
-	movw	%cx, %ds
-	movw	%cx, %es
-	movw	%cx, %fs
-	movw	%cx, %gs
-	movw	%cx, %ss
-
-	# Jump to the 32-bit entrypoint
+	# Transition to 32-bit mode
 	.byte	0x66, 0xea		# ljmpl opcode
-2:	.long	0			# offset
+2:	.long	in_pm32			# offset
 	.word	__BOOT_CS		# segment
 
 	.size	protected_mode_jump, .-protected_mode_jump
+
+	.code32
+	.type	in_pm32, @function
+in_pm32:
+	# Set up data segments for flat 32-bit mode
+	movl	%ecx, %ds
+	movl	%ecx, %es
+	movl	%ecx, %fs
+	movl	%ecx, %gs
+	movl	%ecx, %ss
+	# The 32-bit code sets up its own stack, but this way we do have
+	# a valid stack if some debugging hack wants to use it.
+	addl	%ebx, %esp
+
+	# Set up TR to make Intel VT happy
+	ltr	%di
+
+	# Clear registers to allow for future extensions to the
+	# 32-bit boot protocol
+	xorl	%ecx, %ecx
+	xorl	%edx, %edx
+	xorl	%ebx, %ebx
+	xorl	%ebp, %ebp
+	xorl	%edi, %edi
+
+	# Set up LDTR to make Intel VT happy
+	lldt	%cx
+
+	jmpl	*%eax			# Jump to the 32-bit entrypoint
+
+	.size	in_pm32, .-in_pm32

arch/x86/boot/video-bios.c

@@ -104,6 +104,7 @@ static int bios_probe(void)
 
 		mi = GET_HEAP(struct mode_info, 1);
 		mi->mode = VIDEO_FIRST_BIOS+mode;
+		mi->depth = 0;	/* text */
 		mi->x = rdfs16(0x44a);
 		mi->y = rdfs8(0x484)+1;
 		nmodes++;
@@ -116,7 +117,7 @@ static int bios_probe(void)
 
 __videocard video_bios =
 {
-	.card_name	= "BIOS (scanned)",
+	.card_name	= "BIOS",
 	.probe		= bios_probe,
 	.set_mode	= bios_set_mode,
 	.unsafe		= 1,

arch/x86/boot/video-vesa.c

@@ -79,20 +79,28 @@ static int vesa_probe(void)
 			/* Text Mode, TTY BIOS supported,
 			   supported by hardware */
 			mi = GET_HEAP(struct mode_info, 1);
-			mi->mode = mode + VIDEO_FIRST_VESA;
-			mi->x    = vminfo.h_res;
-			mi->y    = vminfo.v_res;
+			mi->mode  = mode + VIDEO_FIRST_VESA;
+			mi->depth = 0; /* text */
+			mi->x     = vminfo.h_res;
+			mi->y     = vminfo.v_res;
 			nmodes++;
-		} else if ((vminfo.mode_attr & 0x99) == 0x99) {
+		} else if ((vminfo.mode_attr & 0x99) == 0x99 &&
+			   (vminfo.memory_layout == 4 ||
+			    vminfo.memory_layout == 6) &&
+			   vminfo.memory_planes == 1) {
 #ifdef CONFIG_FB
 			/* Graphics mode, color, linear frame buffer
-			   supported -- register the mode but hide from
-			   the menu.  Only do this if framebuffer is
-			   configured, however, otherwise the user will
-			   be left without a screen. */
+			   supported.  Only register the mode if
+			   if framebuffer is configured, however,
+			   otherwise the user will be left without a screen.
+			   We don't require CONFIG_FB_VESA, however, since
+			   some of the other framebuffer drivers can use
+			   this mode-setting, too. */
 			mi = GET_HEAP(struct mode_info, 1);
 			mi->mode = mode + VIDEO_FIRST_VESA;
-			mi->x = mi->y = 0;
+			mi->depth = vminfo.bpp;
+			mi->x = vminfo.h_res;
+			mi->y = vminfo.v_res;
 			nmodes++;
 #endif
 		}

arch/x86/boot/video-vga.c

@@ -18,22 +18,22 @@
 #include "video.h"
 
 static struct mode_info vga_modes[] = {
-	{ VIDEO_80x25,  80, 25 },
-	{ VIDEO_8POINT, 80, 50 },
-	{ VIDEO_80x43,  80, 43 },
-	{ VIDEO_80x28,  80, 28 },
-	{ VIDEO_80x30,  80, 30 },
-	{ VIDEO_80x34,  80, 34 },
-	{ VIDEO_80x60,  80, 60 },
+	{ VIDEO_80x25,  80, 25, 0 },
+	{ VIDEO_8POINT, 80, 50, 0 },
+	{ VIDEO_80x43,  80, 43, 0 },
+	{ VIDEO_80x28,  80, 28, 0 },
+	{ VIDEO_80x30,  80, 30, 0 },
+	{ VIDEO_80x34,  80, 34, 0 },
+	{ VIDEO_80x60,  80, 60, 0 },
 };
 
 static struct mode_info ega_modes[] = {
-	{ VIDEO_80x25,  80, 25 },
-	{ VIDEO_8POINT, 80, 43 },
+	{ VIDEO_80x25,  80, 25, 0 },
+	{ VIDEO_8POINT, 80, 43, 0 },
 };
 
 static struct mode_info cga_modes[] = {
-	{ VIDEO_80x25,  80, 25 },
+	{ VIDEO_80x25,  80, 25, 0 },
 };
 
 __videocard video_vga;

arch/x86/boot/video.c

@@ -293,13 +293,28 @@ static void display_menu(void)
 	struct mode_info *mi;
 	char ch;
 	int i;
+	int nmodes;
+	int modes_per_line;
+	int col;
 
-	puts("Mode:    COLSxROWS:\n");
+	nmodes = 0;
+	for (card = video_cards; card < video_cards_end; card++)
+		nmodes += card->nmodes;
 
+	modes_per_line = 1;
+	if (nmodes >= 20)
+		modes_per_line = 3;
+
+	for (col = 0; col < modes_per_line; col++)
+		puts("Mode: Resolution:  Type: ");
+	putchar('\n');
+
+	col = 0;
 	ch = '0';
 	for (card = video_cards; card < video_cards_end; card++) {
 		mi = card->modes;
 		for (i = 0; i < card->nmodes; i++, mi++) {
+			char resbuf[32];
 			int visible = mi->x && mi->y;
 			u16 mode_id = mi->mode ? mi->mode :
 				(mi->y << 8)+mi->x;
@@ -307,8 +322,18 @@ static void display_menu(void)
 			if (!visible)
 				continue; /* Hidden mode */
 
-			printf("%c  %04X  %3dx%-3d  %s\n",
-			       ch, mode_id, mi->x, mi->y, card->card_name);
+			if (mi->depth)
+				sprintf(resbuf, "%dx%d", mi->y, mi->depth);
+			else
+				sprintf(resbuf, "%d", mi->y);
+
+			printf("%c %03X %4dx%-7s %-6s",
+			       ch, mode_id, mi->x, resbuf, card->card_name);
+			col++;
+			if (col >= modes_per_line) {
+				putchar('\n');
+				col = 0;
+			}
 
 			if (ch == '9')
 				ch = 'a';
@@ -318,6 +343,8 @@ static void display_menu(void)
 				ch++;
 		}
 	}
+	if (col)
+		putchar('\n');
 }
 
 #define H(x)	((x)-'a'+10)

arch/x86/boot/video.h

@@ -83,7 +83,8 @@ void store_screen(void);
 
 struct mode_info {
 	u16 mode;		/* Mode number (vga= style) */
-	u8  x, y;		/* Width, height */
+	u16 x, y;		/* Width, height */
+	u16 depth;		/* Bits per pixel, 0 for text mode */
 };
 
 struct card_info {

arch/x86/boot/voyager.c

@@ -16,8 +16,6 @@
 
 #include "boot.h"
 
-#ifdef CONFIG_X86_VOYAGER
-
 int query_voyager(void)
 {
 	u8 err;
@@ -42,5 +40,3 @@ int query_voyager(void)
 	copy_from_fs(data_ptr, di, 7);	/* Table is 7 bytes apparently */
 	return 0;
 }
-
-#endif /* CONFIG_X86_VOYAGER */

arch/x86/configs/i386_defconfig

@@ -99,9 +99,9 @@ CONFIG_IOSCHED_NOOP=y
 CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_AS is not set
 # CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 

arch/x86/configs/x86_64_defconfig

@@ -145,15 +145,6 @@ CONFIG_K8_NUMA=y
 CONFIG_NODES_SHIFT=6
 CONFIG_X86_64_ACPI_NUMA=y
 CONFIG_NUMA_EMU=y
-CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
-CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM_MANUAL=y
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_NEED_MULTIPLE_NODES=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4

arch/x86/ia32/Makefile

@@ -2,9 +2,7 @@
 # Makefile for the ia32 kernel emulation subsystem.
 #
 
-obj-$(CONFIG_IA32_EMULATION) := ia32entry.o sys_ia32.o ia32_signal.o tls32.o \
-	ia32_binfmt.o fpu32.o ptrace32.o syscall32.o syscall32_syscall.o \
-	mmap32.o
+obj-$(CONFIG_IA32_EMULATION) := ia32entry.o sys_ia32.o ia32_signal.o
 
 sysv-$(CONFIG_SYSVIPC) := ipc32.o
 obj-$(CONFIG_IA32_EMULATION) += $(sysv-y)
@@ -13,40 +11,3 @@ obj-$(CONFIG_IA32_AOUT) += ia32_aout.o
 
 audit-class-$(CONFIG_AUDIT) := audit.o
 obj-$(CONFIG_IA32_EMULATION) += $(audit-class-y)
-
-$(obj)/syscall32_syscall.o: \
-	$(foreach F,sysenter syscall,$(obj)/vsyscall-$F.so)
-
-# Teach kbuild about targets
-targets := $(foreach F,$(addprefix vsyscall-,sysenter syscall),\
-		     $F.o $F.so $F.so.dbg)
-
-# The DSO images are built using a special linker script
-quiet_cmd_syscall = SYSCALL $@
-      cmd_syscall = $(CC) -m32 -nostdlib -shared \
-			  $(call ld-option, -Wl$(comma)--hash-style=sysv) \
-			   -Wl,-soname=linux-gate.so.1 -o $@ \
-			   -Wl,-T,$(filter-out FORCE,$^)
-
-$(obj)/%.so: OBJCOPYFLAGS := -S
-$(obj)/%.so: $(obj)/%.so.dbg FORCE
-	$(call if_changed,objcopy)
-
-$(obj)/vsyscall-sysenter.so.dbg $(obj)/vsyscall-syscall.so.dbg: \
-$(obj)/vsyscall-%.so.dbg: $(src)/vsyscall.lds $(obj)/vsyscall-%.o FORCE
-	$(call if_changed,syscall)
-
-AFLAGS_vsyscall-sysenter.o = -m32 -Wa,-32
-AFLAGS_vsyscall-syscall.o = -m32 -Wa,-32
-
-vdsos := vdso32-sysenter.so vdso32-syscall.so
-
-quiet_cmd_vdso_install = INSTALL $@
-      cmd_vdso_install = cp $(@:vdso32-%.so=$(obj)/vsyscall-%.so.dbg) \
-			    $(MODLIB)/vdso/$@
-
-$(vdsos):
-	@mkdir -p $(MODLIB)/vdso
-	$(call cmd,vdso_install)
-
-vdso_install: $(vdsos)

arch/x86/ia32/audit.c

@@ -27,7 +27,7 @@ unsigned ia32_signal_class[] = {
 
 int ia32_classify_syscall(unsigned syscall)
 {
-	switch(syscall) {
+	switch (syscall) {
 	case __NR_open:
 		return 2;
 	case __NR_openat:

arch/x86/ia32/fpu32.c

@@ -1,183 +0,0 @@
-/* 
- * Copyright 2002 Andi Kleen, SuSE Labs.
- * FXSAVE<->i387 conversion support. Based on code by Gareth Hughes.
- * This is used for ptrace, signals and coredumps in 32bit emulation.
- */ 
-
-#include <linux/sched.h>
-#include <asm/sigcontext32.h>
-#include <asm/processor.h>
-#include <asm/uaccess.h>
-#include <asm/i387.h>
-
-static inline unsigned short twd_i387_to_fxsr(unsigned short twd)
-{
-	unsigned int tmp; /* to avoid 16 bit prefixes in the code */
- 
-	/* Transform each pair of bits into 01 (valid) or 00 (empty) */
-        tmp = ~twd;
-        tmp = (tmp | (tmp>>1)) & 0x5555; /* 0V0V0V0V0V0V0V0V */
-        /* and move the valid bits to the lower byte. */
-        tmp = (tmp | (tmp >> 1)) & 0x3333; /* 00VV00VV00VV00VV */
-        tmp = (tmp | (tmp >> 2)) & 0x0f0f; /* 0000VVVV0000VVVV */
-        tmp = (tmp | (tmp >> 4)) & 0x00ff; /* 00000000VVVVVVVV */
-        return tmp;
-}
-
-static inline unsigned long twd_fxsr_to_i387(struct i387_fxsave_struct *fxsave)
-{
-	struct _fpxreg *st = NULL;
-	unsigned long tos = (fxsave->swd >> 11) & 7;
-	unsigned long twd = (unsigned long) fxsave->twd;
-	unsigned long tag;
-	unsigned long ret = 0xffff0000;
-	int i;
-
-#define FPREG_ADDR(f, n)	((void *)&(f)->st_space + (n) * 16);
-
-	for (i = 0 ; i < 8 ; i++) {
-		if (twd & 0x1) {
-			st = FPREG_ADDR( fxsave, (i - tos) & 7 );
-
-			switch (st->exponent & 0x7fff) {
-			case 0x7fff:
-				tag = 2;		/* Special */
-				break;
-			case 0x0000:
-				if ( !st->significand[0] &&
-				     !st->significand[1] &&
-				     !st->significand[2] &&
-				     !st->significand[3] ) {
-					tag = 1;	/* Zero */
-				} else {
-					tag = 2;	/* Special */
-				}
-				break;
-			default:
-				if (st->significand[3] & 0x8000) {
-					tag = 0;	/* Valid */
-				} else {
-					tag = 2;	/* Special */
-				}
-				break;
-			}
-		} else {
-			tag = 3;			/* Empty */
-		}
-		ret |= (tag << (2 * i));
-		twd = twd >> 1;
-	}
-	return ret;
-}
-
-
-static inline int convert_fxsr_from_user(struct i387_fxsave_struct *fxsave,
-					 struct _fpstate_ia32 __user *buf)
-{
-	struct _fpxreg *to;
-	struct _fpreg __user *from;
-	int i;
-	u32 v;
-	int err = 0;
-
-#define G(num,val) err |= __get_user(val, num + (u32 __user *)buf)
-	G(0, fxsave->cwd);
-	G(1, fxsave->swd);
-	G(2, fxsave->twd);
-	fxsave->twd = twd_i387_to_fxsr(fxsave->twd);
-	G(3, fxsave->rip);
-	G(4, v);
-	fxsave->fop = v>>16;	/* cs ignored */
-	G(5, fxsave->rdp);
-	/* 6: ds ignored */
-#undef G
-	if (err) 
-		return -1; 
-
-	to = (struct _fpxreg *)&fxsave->st_space[0];
-	from = &buf->_st[0];
-	for (i = 0 ; i < 8 ; i++, to++, from++) {
-		if (__copy_from_user(to, from, sizeof(*from)))
-			return -1;
-	}
-	return 0;
-}
-
-
-static inline int convert_fxsr_to_user(struct _fpstate_ia32 __user *buf,
-				       struct i387_fxsave_struct *fxsave,
-				       struct pt_regs *regs,
-				       struct task_struct *tsk)
-{
-	struct _fpreg __user *to;
-	struct _fpxreg *from;
-	int i;
-	u16 cs,ds; 
-	int err = 0; 
-
-	if (tsk == current) {
-		/* should be actually ds/cs at fpu exception time,
-		   but that information is not available in 64bit mode. */
-		asm("movw %%ds,%0 " : "=r" (ds)); 
-		asm("movw %%cs,%0 " : "=r" (cs)); 		
-	} else { /* ptrace. task has stopped. */
-		ds = tsk->thread.ds;
-		cs = regs->cs;
-	} 
-
-#define P(num,val) err |= __put_user(val, num + (u32 __user *)buf)
-	P(0, (u32)fxsave->cwd | 0xffff0000);
-	P(1, (u32)fxsave->swd | 0xffff0000);
-	P(2, twd_fxsr_to_i387(fxsave));
-	P(3, (u32)fxsave->rip);
-	P(4,  cs | ((u32)fxsave->fop) << 16); 
-	P(5, fxsave->rdp);
-	P(6, 0xffff0000 | ds);
-#undef P
-
-	if (err) 
-		return -1; 
-
-	to = &buf->_st[0];
-	from = (struct _fpxreg *) &fxsave->st_space[0];
-	for ( i = 0 ; i < 8 ; i++, to++, from++ ) {
-		if (__copy_to_user(to, from, sizeof(*to)))
-			return -1;
-	}
-	return 0;
-}
-
-int restore_i387_ia32(struct task_struct *tsk, struct _fpstate_ia32 __user *buf, int fsave) 
-{ 
-	clear_fpu(tsk);
-	if (!fsave) { 
-		if (__copy_from_user(&tsk->thread.i387.fxsave, 
-				     &buf->_fxsr_env[0],
-				     sizeof(struct i387_fxsave_struct)))
-			return -1;
-		tsk->thread.i387.fxsave.mxcsr &= mxcsr_feature_mask;
-		set_stopped_child_used_math(tsk);
-	} 
-	return convert_fxsr_from_user(&tsk->thread.i387.fxsave, buf);
-}  
-
-int save_i387_ia32(struct task_struct *tsk, 
-		   struct _fpstate_ia32 __user *buf, 
-		   struct pt_regs *regs,
-		   int fsave)
-{
-	int err = 0;
-
-	init_fpu(tsk);
-	if (convert_fxsr_to_user(buf, &tsk->thread.i387.fxsave, regs, tsk))
-		return -1;
-	if (fsave)
-		return 0;
-	err |= __put_user(tsk->thread.i387.fxsave.swd, &buf->status);
-	if (fsave) 
-		return err ? -1 : 1; 	
-	err |= __put_user(X86_FXSR_MAGIC, &buf->magic);
-	err |= __copy_to_user(&buf->_fxsr_env[0], &tsk->thread.i387.fxsave,
-			      sizeof(struct i387_fxsave_struct));
-	return err ? -1 : 1;
-}

arch/x86/ia32/ia32_aout.c

@@ -25,6 +25,7 @@
 #include <linux/binfmts.h>
 #include <linux/personality.h>
 #include <linux/init.h>
+#include <linux/jiffies.h>
 
 #include <asm/system.h>
 #include <asm/uaccess.h>
@@ -36,61 +37,67 @@
 #undef WARN_OLD
 #undef CORE_DUMP /* probably broken */
 
-static int load_aout_binary(struct linux_binprm *, struct pt_regs * regs);
-static int load_aout_library(struct file*);
+static int load_aout_binary(struct linux_binprm *, struct pt_regs *regs);
+static int load_aout_library(struct file *);
 
 #ifdef CORE_DUMP
-static int aout_core_dump(long signr, struct pt_regs *regs, struct file *file, unsigned long limit);
+static int aout_core_dump(long signr, struct pt_regs *regs, struct file *file,
+			  unsigned long limit);
 
 /*
  * fill in the user structure for a core dump..
  */
-static void dump_thread32(struct pt_regs * regs, struct user32 * dump)
+static void dump_thread32(struct pt_regs *regs, struct user32 *dump)
 {
-	u32 fs,gs;
+	u32 fs, gs;
 
 /* changed the size calculations - should hopefully work better. lbt */
 	dump->magic = CMAGIC;
 	dump->start_code = 0;
-	dump->start_stack = regs->rsp & ~(PAGE_SIZE - 1);
+	dump->start_stack = regs->sp & ~(PAGE_SIZE - 1);
 	dump->u_tsize = ((unsigned long) current->mm->end_code) >> PAGE_SHIFT;
-	dump->u_dsize = ((unsigned long) (current->mm->brk + (PAGE_SIZE-1))) >> PAGE_SHIFT;
+	dump->u_dsize = ((unsigned long)
+			 (current->mm->brk + (PAGE_SIZE-1))) >> PAGE_SHIFT;
 	dump->u_dsize -= dump->u_tsize;
 	dump->u_ssize = 0;
-	dump->u_debugreg[0] = current->thread.debugreg0;  
-	dump->u_debugreg[1] = current->thread.debugreg1;  
-	dump->u_debugreg[2] = current->thread.debugreg2;  
-	dump->u_debugreg[3] = current->thread.debugreg3;  
-	dump->u_debugreg[4] = 0;  
-	dump->u_debugreg[5] = 0;  
-	dump->u_debugreg[6] = current->thread.debugreg6;  
-	dump->u_debugreg[7] = current->thread.debugreg7;  
-
-	if (dump->start_stack < 0xc0000000)
-		dump->u_ssize = ((unsigned long) (0xc0000000 - dump->start_stack)) >> PAGE_SHIFT;
-
-	dump->regs.ebx = regs->rbx;
-	dump->regs.ecx = regs->rcx;
-	dump->regs.edx = regs->rdx;
-	dump->regs.esi = regs->rsi;
-	dump->regs.edi = regs->rdi;
-	dump->regs.ebp = regs->rbp;
-	dump->regs.eax = regs->rax;
+	dump->u_debugreg[0] = current->thread.debugreg0;
+	dump->u_debugreg[1] = current->thread.debugreg1;
+	dump->u_debugreg[2] = current->thread.debugreg2;
+	dump->u_debugreg[3] = current->thread.debugreg3;
+	dump->u_debugreg[4] = 0;
+	dump->u_debugreg[5] = 0;
+	dump->u_debugreg[6] = current->thread.debugreg6;
+	dump->u_debugreg[7] = current->thread.debugreg7;
+
+	if (dump->start_stack < 0xc0000000) {
+		unsigned long tmp;
+
+		tmp = (unsigned long) (0xc0000000 - dump->start_stack);
+		dump->u_ssize = tmp >> PAGE_SHIFT;
+	}
+
+	dump->regs.bx = regs->bx;
+	dump->regs.cx = regs->cx;
+	dump->regs.dx = regs->dx;
+	dump->regs.si = regs->si;
+	dump->regs.di = regs->di;
+	dump->regs.bp = regs->bp;
+	dump->regs.ax = regs->ax;
 	dump->regs.ds = current->thread.ds;
 	dump->regs.es = current->thread.es;
 	asm("movl %%fs,%0" : "=r" (fs)); dump->regs.fs = fs;
-	asm("movl %%gs,%0" : "=r" (gs)); dump->regs.gs = gs; 
-	dump->regs.orig_eax = regs->orig_rax;
-	dump->regs.eip = regs->rip;
+	asm("movl %%gs,%0" : "=r" (gs)); dump->regs.gs = gs;
+	dump->regs.orig_ax = regs->orig_ax;
+	dump->regs.ip = regs->ip;
 	dump->regs.cs = regs->cs;
-	dump->regs.eflags = regs->eflags;
-	dump->regs.esp = regs->rsp;
+	dump->regs.flags = regs->flags;
+	dump->regs.sp = regs->sp;
 	dump->regs.ss = regs->ss;
 
 #if 1 /* FIXME */
 	dump->u_fpvalid = 0;
 #else
-	dump->u_fpvalid = dump_fpu (regs, &dump->i387);
+	dump->u_fpvalid = dump_fpu(regs, &dump->i387);
 #endif
 }
 
@@ -128,15 +135,19 @@ static int dump_write(struct file *file, const void *addr, int nr)
 	return file->f_op->write(file, addr, nr, &file->f_pos) == nr;
 }
 
-#define DUMP_WRITE(addr, nr)	\
+#define DUMP_WRITE(addr, nr)			     \
 	if (!dump_write(file, (void *)(addr), (nr))) \
 		goto end_coredump;
 
-#define DUMP_SEEK(offset) \
-if (file->f_op->llseek) { \
-	if (file->f_op->llseek(file,(offset),0) != (offset)) \
- 		goto end_coredump; \
-} else file->f_pos = (offset)
+#define DUMP_SEEK(offset)						\
+	if (file->f_op->llseek) {					\
+		if (file->f_op->llseek(file, (offset), 0) != (offset))	\
+			goto end_coredump;				\
+	} else								\
+		file->f_pos = (offset)
+
+#define START_DATA()	(u.u_tsize << PAGE_SHIFT)
+#define START_STACK(u)	(u.start_stack)
 
 /*
  * Routine writes a core dump image in the current directory.
@@ -148,62 +159,70 @@ if (file->f_op->llseek) { \
  * dumping of the process results in another error..
  */
 
-static int aout_core_dump(long signr, struct pt_regs *regs, struct file *file, unsigned long limit)
+static int aout_core_dump(long signr, struct pt_regs *regs, struct file *file,
+			  unsigned long limit)
 {
 	mm_segment_t fs;
 	int has_dumped = 0;
 	unsigned long dump_start, dump_size;
 	struct user32 dump;
-#       define START_DATA(u)	(u.u_tsize << PAGE_SHIFT)
-#       define START_STACK(u)   (u.start_stack)
 
 	fs = get_fs();
 	set_fs(KERNEL_DS);
 	has_dumped = 1;
 	current->flags |= PF_DUMPCORE;
-       	strncpy(dump.u_comm, current->comm, sizeof(current->comm));
-	dump.u_ar0 = (u32)(((unsigned long)(&dump.regs)) - ((unsigned long)(&dump)));
+	strncpy(dump.u_comm, current->comm, sizeof(current->comm));
+	dump.u_ar0 = (u32)(((unsigned long)(&dump.regs)) -
+			   ((unsigned long)(&dump)));
 	dump.signal = signr;
 	dump_thread32(regs, &dump);
 
-/* If the size of the dump file exceeds the rlimit, then see what would happen
-   if we wrote the stack, but not the data area.  */
+	/*
+	 * If the size of the dump file exceeds the rlimit, then see
+	 * what would happen if we wrote the stack, but not the data
+	 * area.
+	 */
 	if ((dump.u_dsize + dump.u_ssize + 1) * PAGE_SIZE > limit)
 		dump.u_dsize = 0;
 
-/* Make sure we have enough room to write the stack and data areas. */
+	/* Make sure we have enough room to write the stack and data areas. */
 	if ((dump.u_ssize + 1) * PAGE_SIZE > limit)
 		dump.u_ssize = 0;
 
-/* make sure we actually have a data and stack area to dump */
+	/* make sure we actually have a data and stack area to dump */
 	set_fs(USER_DS);
-	if (!access_ok(VERIFY_READ, (void *) (unsigned long)START_DATA(dump), dump.u_dsize << PAGE_SHIFT))
+	if (!access_ok(VERIFY_READ, (void *) (unsigned long)START_DATA(dump),
+		       dump.u_dsize << PAGE_SHIFT))
 		dump.u_dsize = 0;
-	if (!access_ok(VERIFY_READ, (void *) (unsigned long)START_STACK(dump), dump.u_ssize << PAGE_SHIFT))
+	if (!access_ok(VERIFY_READ, (void *) (unsigned long)START_STACK(dump),
+		       dump.u_ssize << PAGE_SHIFT))
 		dump.u_ssize = 0;
 
 	set_fs(KERNEL_DS);
-/* struct user */
-	DUMP_WRITE(&dump,sizeof(dump));
-/* Now dump all of the user data.  Include malloced stuff as well */
+	/* struct user */
+	DUMP_WRITE(&dump, sizeof(dump));
+	/* Now dump all of the user data.  Include malloced stuff as well */
 	DUMP_SEEK(PAGE_SIZE);
-/* now we start writing out the user space info */
+	/* now we start writing out the user space info */
 	set_fs(USER_DS);
-/* Dump the data area */
+	/* Dump the data area */
 	if (dump.u_dsize != 0) {
 		dump_start = START_DATA(dump);
 		dump_size = dump.u_dsize << PAGE_SHIFT;
-		DUMP_WRITE(dump_start,dump_size);
+		DUMP_WRITE(dump_start, dump_size);
 	}
-/* Now prepare to dump the stack area */
+	/* Now prepare to dump the stack area */
 	if (dump.u_ssize != 0) {
 		dump_start = START_STACK(dump);
 		dump_size = dump.u_ssize << PAGE_SHIFT;
-		DUMP_WRITE(dump_start,dump_size);
+		DUMP_WRITE(dump_start, dump_size);
 	}
-/* Finally dump the task struct.  Not be used by gdb, but could be useful */
+	/*
+	 * Finally dump the task struct.  Not be used by gdb, but
+	 * could be useful
+	 */
 	set_fs(KERNEL_DS);
-	DUMP_WRITE(current,sizeof(*current));
+	DUMP_WRITE(current, sizeof(*current));
 end_coredump:
 	set_fs(fs);
 	return has_dumped;
@@ -217,35 +236,34 @@ end_coredump:
  */
 static u32 __user *create_aout_tables(char __user *p, struct linux_binprm *bprm)
 {
-	u32 __user *argv;
-	u32 __user *envp;
-	u32 __user *sp;
-	int argc = bprm->argc;
-	int envc = bprm->envc;
+	u32 __user *argv, *envp, *sp;
+	int argc = bprm->argc, envc = bprm->envc;
 
 	sp = (u32 __user *) ((-(unsigned long)sizeof(u32)) & (unsigned long) p);
 	sp -= envc+1;
 	envp = sp;
 	sp -= argc+1;
 	argv = sp;
-	put_user((unsigned long) envp,--sp);
-	put_user((unsigned long) argv,--sp);
-	put_user(argc,--sp);
+	put_user((unsigned long) envp, --sp);
+	put_user((unsigned long) argv, --sp);
+	put_user(argc, --sp);
 	current->mm->arg_start = (unsigned long) p;
-	while (argc-->0) {
+	while (argc-- > 0) {
 		char c;
-		put_user((u32)(unsigned long)p,argv++);
+
+		put_user((u32)(unsigned long)p, argv++);
 		do {
-			get_user(c,p++);
+			get_user(c, p++);
 		} while (c);
 	}
 	put_user(0, argv);
 	current->mm->arg_end = current->mm->env_start = (unsigned long) p;
-	while (envc-->0) {
+	while (envc-- > 0) {
 		char c;
-		put_user((u32)(unsigned long)p,envp++);
+
+		put_user((u32)(unsigned long)p, envp++);
 		do {
-			get_user(c,p++);
+			get_user(c, p++);
 		} while (c);
 	}
 	put_user(0, envp);
@@ -257,20 +275,18 @@ static u32 __user *create_aout_tables(char __user *p, struct linux_binprm *bprm)
  * These are the functions used to load a.out style executables and shared
  * libraries.  There is no binary dependent code anywhere else.
  */
-
-static int load_aout_binary(struct linux_binprm * bprm, struct pt_regs * regs)
+static int load_aout_binary(struct linux_binprm *bprm, struct pt_regs *regs)
 {
+	unsigned long error, fd_offset, rlim;
 	struct exec ex;
-	unsigned long error;
-	unsigned long fd_offset;
-	unsigned long rlim;
 	int retval;
 
 	ex = *((struct exec *) bprm->buf);		/* exec-header */
 	if ((N_MAGIC(ex) != ZMAGIC && N_MAGIC(ex) != OMAGIC &&
 	     N_MAGIC(ex) != QMAGIC && N_MAGIC(ex) != NMAGIC) ||
 	    N_TRSIZE(ex) || N_DRSIZE(ex) ||
-	    i_size_read(bprm->file->f_path.dentry->d_inode) < ex.a_text+ex.a_data+N_SYMSIZE(ex)+N_TXTOFF(ex)) {
+	    i_size_read(bprm->file->f_path.dentry->d_inode) <
+	    ex.a_text+ex.a_data+N_SYMSIZE(ex)+N_TXTOFF(ex)) {
 		return -ENOEXEC;
 	}
 
@@ -291,13 +307,13 @@ static int load_aout_binary(struct linux_binprm * bprm, struct pt_regs * regs)
 	if (retval)
 		return retval;
 
-	regs->cs = __USER32_CS; 
+	regs->cs = __USER32_CS;
 	regs->r8 = regs->r9 = regs->r10 = regs->r11 = regs->r12 =
 		regs->r13 = regs->r14 = regs->r15 = 0;
 
 	/* OK, This is the point of no return */
 	set_personality(PER_LINUX);
-	set_thread_flag(TIF_IA32); 
+	set_thread_flag(TIF_IA32);
 	clear_thread_flag(TIF_ABI_PENDING);
 
 	current->mm->end_code = ex.a_text +
@@ -311,7 +327,7 @@ static int load_aout_binary(struct linux_binprm * bprm, struct pt_regs * regs)
 
 	current->mm->mmap = NULL;
 	compute_creds(bprm);
- 	current->flags &= ~PF_FORKNOEXEC;
+	current->flags &= ~PF_FORKNOEXEC;
 
 	if (N_MAGIC(ex) == OMAGIC) {
 		unsigned long text_addr, map_size;
@@ -338,30 +354,31 @@ static int load_aout_binary(struct linux_binprm * bprm, struct pt_regs * regs)
 			send_sig(SIGKILL, current, 0);
 			return error;
 		}
-			 
+
 		flush_icache_range(text_addr, text_addr+ex.a_text+ex.a_data);
 	} else {
 #ifdef WARN_OLD
 		static unsigned long error_time, error_time2;
 		if ((ex.a_text & 0xfff || ex.a_data & 0xfff) &&
-		    (N_MAGIC(ex) != NMAGIC) && (jiffies-error_time2) > 5*HZ)
-		{
+		    (N_MAGIC(ex) != NMAGIC) &&
+				time_after(jiffies, error_time2 + 5*HZ)) {
 			printk(KERN_NOTICE "executable not page aligned\n");
 			error_time2 = jiffies;
 		}
 
 		if ((fd_offset & ~PAGE_MASK) != 0 &&
-		    (jiffies-error_time) > 5*HZ)
-		{
-			printk(KERN_WARNING 
-			       "fd_offset is not page aligned. Please convert program: %s\n",
+			    time_after(jiffies, error_time + 5*HZ)) {
+			printk(KERN_WARNING
+			       "fd_offset is not page aligned. Please convert "
+			       "program: %s\n",
 			       bprm->file->f_path.dentry->d_name.name);
 			error_time = jiffies;
 		}
 #endif
 
-		if (!bprm->file->f_op->mmap||((fd_offset & ~PAGE_MASK) != 0)) {
+		if (!bprm->file->f_op->mmap || (fd_offset & ~PAGE_MASK) != 0) {
 			loff_t pos = fd_offset;
+
 			down_write(&current->mm->mmap_sem);
 			do_brk(N_TXTADDR(ex), ex.a_text+ex.a_data);
 			up_write(&current->mm->mmap_sem);
@@ -376,9 +393,10 @@ static int load_aout_binary(struct linux_binprm * bprm, struct pt_regs * regs)
 
 		down_write(&current->mm->mmap_sem);
 		error = do_mmap(bprm->file, N_TXTADDR(ex), ex.a_text,
-			PROT_READ | PROT_EXEC,
-			MAP_FIXED | MAP_PRIVATE | MAP_DENYWRITE | MAP_EXECUTABLE | MAP_32BIT,
-			fd_offset);
+				PROT_READ | PROT_EXEC,
+				MAP_FIXED | MAP_PRIVATE | MAP_DENYWRITE |
+				MAP_EXECUTABLE | MAP_32BIT,
+				fd_offset);
 		up_write(&current->mm->mmap_sem);
 
 		if (error != N_TXTADDR(ex)) {
@@ -387,9 +405,10 @@ static int load_aout_binary(struct linux_binprm * bprm, struct pt_regs * regs)
 		}
 
 		down_write(&current->mm->mmap_sem);
- 		error = do_mmap(bprm->file, N_DATADDR(ex), ex.a_data,
+		error = do_mmap(bprm->file, N_DATADDR(ex), ex.a_data,
 				PROT_READ | PROT_WRITE | PROT_EXEC,
-				MAP_FIXED | MAP_PRIVATE | MAP_DENYWRITE | MAP_EXECUTABLE | MAP_32BIT,
+				MAP_FIXED | MAP_PRIVATE | MAP_DENYWRITE |
+				MAP_EXECUTABLE | MAP_32BIT,
 				fd_offset + ex.a_text);
 		up_write(&current->mm->mmap_sem);
 		if (error != N_DATADDR(ex)) {
@@ -403,9 +422,9 @@ beyond_if:
 	set_brk(current->mm->start_brk, current->mm->brk);
 
 	retval = setup_arg_pages(bprm, IA32_STACK_TOP, EXSTACK_DEFAULT);
-	if (retval < 0) { 
-		/* Someone check-me: is this error path enough? */ 
-		send_sig(SIGKILL, current, 0); 
+	if (retval < 0) {
+		/* Someone check-me: is this error path enough? */
+		send_sig(SIGKILL, current, 0);
 		return retval;
 	}
 
@@ -414,10 +433,10 @@ beyond_if:
 	/* start thread */
 	asm volatile("movl %0,%%fs" :: "r" (0)); \
 	asm volatile("movl %0,%%es; movl %0,%%ds": :"r" (__USER32_DS));
-	load_gs_index(0); 
-	(regs)->rip = ex.a_entry;
-	(regs)->rsp = current->mm->start_stack;
-	(regs)->eflags = 0x200;
+	load_gs_index(0);
+	(regs)->ip = ex.a_entry;
+	(regs)->sp = current->mm->start_stack;
+	(regs)->flags = 0x200;
 	(regs)->cs = __USER32_CS;
 	(regs)->ss = __USER32_DS;
 	regs->r8 = regs->r9 = regs->r10 = regs->r11 =
@@ -425,7 +444,7 @@ beyond_if:
 	set_fs(USER_DS);
 	if (unlikely(current->ptrace & PT_PTRACED)) {
 		if (current->ptrace & PT_TRACE_EXEC)
-			ptrace_notify ((PTRACE_EVENT_EXEC << 8) | SIGTRAP);
+			ptrace_notify((PTRACE_EVENT_EXEC << 8) | SIGTRAP);
 		else
 			send_sig(SIGTRAP, current, 0);
 	}
@@ -434,9 +453,8 @@ beyond_if:
 
 static int load_aout_library(struct file *file)
 {
-	struct inode * inode;
-	unsigned long bss, start_addr, len;
-	unsigned long error;
+	struct inode *inode;
+	unsigned long bss, start_addr, len, error;
 	int retval;
 	struct exec ex;
 
@@ -450,7 +468,8 @@ static int load_aout_library(struct file *file)
 	/* We come in here for the regular a.out style of shared libraries */
 	if ((N_MAGIC(ex) != ZMAGIC && N_MAGIC(ex) != QMAGIC) || N_TRSIZE(ex) ||
 	    N_DRSIZE(ex) || ((ex.a_entry & 0xfff) && N_MAGIC(ex) == ZMAGIC) ||
-	    i_size_read(inode) < ex.a_text+ex.a_data+N_SYMSIZE(ex)+N_TXTOFF(ex)) {
+	    i_size_read(inode) <
+	    ex.a_text+ex.a_data+N_SYMSIZE(ex)+N_TXTOFF(ex)) {
 		goto out;
 	}
 
@@ -467,10 +486,10 @@ static int load_aout_library(struct file *file)
 
 #ifdef WARN_OLD
 		static unsigned long error_time;
-		if ((jiffies-error_time) > 5*HZ)
-		{
-			printk(KERN_WARNING 
-			       "N_TXTOFF is not page aligned. Please convert library: %s\n",
+		if (time_after(jiffies, error_time + 5*HZ)) {
+			printk(KERN_WARNING
+			       "N_TXTOFF is not page aligned. Please convert "
+			       "library: %s\n",
 			       file->f_path.dentry->d_name.name);
 			error_time = jiffies;
 		}
@@ -478,11 +497,12 @@ static int load_aout_library(struct file *file)
 		down_write(&current->mm->mmap_sem);
 		do_brk(start_addr, ex.a_text + ex.a_data + ex.a_bss);
 		up_write(&current->mm->mmap_sem);
-		
+
 		file->f_op->read(file, (char __user *)start_addr,
 			ex.a_text + ex.a_data, &pos);
 		flush_icache_range((unsigned long) start_addr,
-				   (unsigned long) start_addr + ex.a_text + ex.a_data);
+				   (unsigned long) start_addr + ex.a_text +
+				   ex.a_data);
 
 		retval = 0;
 		goto out;

arch/x86/ia32/ia32_binfmt.c

@@ -1,285 +0,0 @@
-/* 
- * Written 2000,2002 by Andi Kleen. 
- * 
- * Loosely based on the sparc64 and IA64 32bit emulation loaders.
- * This tricks binfmt_elf.c into loading 32bit binaries using lots 
- * of ugly preprocessor tricks. Talk about very very poor man's inheritance.
- */ 
-
-#include <linux/types.h>
-#include <linux/stddef.h>
-#include <linux/rwsem.h>
-#include <linux/sched.h>
-#include <linux/compat.h>
-#include <linux/string.h>
-#include <linux/binfmts.h>
-#include <linux/mm.h>
-#include <linux/security.h>
-#include <linux/elfcore-compat.h>
-
-#include <asm/segment.h> 
-#include <asm/ptrace.h>
-#include <asm/processor.h>
-#include <asm/user32.h>
-#include <asm/sigcontext32.h>
-#include <asm/fpu32.h>
-#include <asm/i387.h>
-#include <asm/uaccess.h>
-#include <asm/ia32.h>
-#include <asm/vsyscall32.h>
-
-#undef	ELF_ARCH
-#undef	ELF_CLASS
-#define ELF_CLASS	ELFCLASS32
-#define ELF_ARCH	EM_386
-
-#undef	elfhdr
-#undef	elf_phdr
-#undef	elf_note
-#undef	elf_addr_t
-#define elfhdr		elf32_hdr
-#define elf_phdr	elf32_phdr
-#define elf_note	elf32_note
-#define elf_addr_t	Elf32_Off
-
-#define ELF_NAME "elf/i386"
-
-#define AT_SYSINFO 32
-#define AT_SYSINFO_EHDR		33
-
-int sysctl_vsyscall32 = 1;
-
-#undef ARCH_DLINFO
-#define ARCH_DLINFO do {  \
-	if (sysctl_vsyscall32) { \
-		current->mm->context.vdso = (void *)VSYSCALL32_BASE;	\
-		NEW_AUX_ENT(AT_SYSINFO, (u32)(u64)VSYSCALL32_VSYSCALL); \
-		NEW_AUX_ENT(AT_SYSINFO_EHDR, VSYSCALL32_BASE);    \
-	}	\
-} while(0)
-
-struct file;
-
-#define IA32_EMULATOR 1
-
-#undef ELF_ET_DYN_BASE
-
-#define ELF_ET_DYN_BASE		(TASK_UNMAPPED_BASE + 0x1000000)
-
-#define jiffies_to_timeval(a,b) do { (b)->tv_usec = 0; (b)->tv_sec = (a)/HZ; }while(0)
-
-#define _GET_SEG(x) \
-	({ __u32 seg; asm("movl %%" __stringify(x) ",%0" : "=r"(seg)); seg; })
-
-/* Assumes current==process to be dumped */
-#undef	ELF_CORE_COPY_REGS
-#define ELF_CORE_COPY_REGS(pr_reg, regs)       		\
-	pr_reg[0] = regs->rbx;				\
-	pr_reg[1] = regs->rcx;				\
-	pr_reg[2] = regs->rdx;				\
-	pr_reg[3] = regs->rsi;				\
-	pr_reg[4] = regs->rdi;				\
-	pr_reg[5] = regs->rbp;				\
-	pr_reg[6] = regs->rax;				\
-	pr_reg[7] = _GET_SEG(ds);   			\
-	pr_reg[8] = _GET_SEG(es);			\
-	pr_reg[9] = _GET_SEG(fs);			\
-	pr_reg[10] = _GET_SEG(gs);			\
-	pr_reg[11] = regs->orig_rax;			\
-	pr_reg[12] = regs->rip;				\
-	pr_reg[13] = regs->cs;				\
-	pr_reg[14] = regs->eflags;			\
-	pr_reg[15] = regs->rsp;				\
-	pr_reg[16] = regs->ss;
-
-
-#define elf_prstatus	compat_elf_prstatus
-#define elf_prpsinfo	compat_elf_prpsinfo
-#define elf_fpregset_t	struct user_i387_ia32_struct
-#define	elf_fpxregset_t	struct user32_fxsr_struct
-#define user		user32
-
-#undef elf_read_implies_exec
-#define elf_read_implies_exec(ex, executable_stack)     (executable_stack != EXSTACK_DISABLE_X)
-
-#define elf_core_copy_regs		elf32_core_copy_regs
-static inline void elf32_core_copy_regs(compat_elf_gregset_t *elfregs,
-					struct pt_regs *regs)
-{
-	ELF_CORE_COPY_REGS((&elfregs->ebx), regs)
-}
-
-#define elf_core_copy_task_regs		elf32_core_copy_task_regs
-static inline int elf32_core_copy_task_regs(struct task_struct *t,
-					    compat_elf_gregset_t* elfregs)
-{	
-	struct pt_regs *pp = task_pt_regs(t);
-	ELF_CORE_COPY_REGS((&elfregs->ebx), pp);
-	/* fix wrong segments */ 
-	elfregs->ds = t->thread.ds;
-	elfregs->fs = t->thread.fsindex;
-	elfregs->gs = t->thread.gsindex;
-	elfregs->es = t->thread.es;
-	return 1; 
-}
-
-#define elf_core_copy_task_fpregs	elf32_core_copy_task_fpregs
-static inline int 
-elf32_core_copy_task_fpregs(struct task_struct *tsk, struct pt_regs *regs,
-			    elf_fpregset_t *fpu)
-{
-	struct _fpstate_ia32 *fpstate = (void*)fpu; 
-	mm_segment_t oldfs = get_fs();
-
-	if (!tsk_used_math(tsk))
-		return 0;
-	if (!regs)
-		regs = task_pt_regs(tsk);
-	if (tsk == current)
-		unlazy_fpu(tsk);
-	set_fs(KERNEL_DS); 
-	save_i387_ia32(tsk, fpstate, regs, 1);
-	/* Correct for i386 bug. It puts the fop into the upper 16bits of 
-	   the tag word (like FXSAVE), not into the fcs*/ 
-	fpstate->cssel |= fpstate->tag & 0xffff0000; 
-	set_fs(oldfs); 
-	return 1; 
-}
-
-#define ELF_CORE_COPY_XFPREGS 1
-#define ELF_CORE_XFPREG_TYPE NT_PRXFPREG
-#define elf_core_copy_task_xfpregs	elf32_core_copy_task_xfpregs
-static inline int 
-elf32_core_copy_task_xfpregs(struct task_struct *t, elf_fpxregset_t *xfpu)
-{
-	struct pt_regs *regs = task_pt_regs(t);
-	if (!tsk_used_math(t))
-		return 0;
-	if (t == current)
-		unlazy_fpu(t); 
-	memcpy(xfpu, &t->thread.i387.fxsave, sizeof(elf_fpxregset_t));
-	xfpu->fcs = regs->cs; 
-	xfpu->fos = t->thread.ds; /* right? */ 
-	return 1;
-}
-
-#undef elf_check_arch
-#define elf_check_arch(x) \
-	((x)->e_machine == EM_386)
-
-extern int force_personality32;
-
-#undef	ELF_EXEC_PAGESIZE
-#undef	ELF_HWCAP
-#undef	ELF_PLATFORM
-#undef	SET_PERSONALITY
-#define ELF_EXEC_PAGESIZE PAGE_SIZE
-#define ELF_HWCAP (boot_cpu_data.x86_capability[0])
-#define ELF_PLATFORM  ("i686")
-#define SET_PERSONALITY(ex, ibcs2)			\
-do {							\
-	unsigned long new_flags = 0;				\
-	if ((ex).e_ident[EI_CLASS] == ELFCLASS32)		\
-		new_flags = _TIF_IA32;				\
-	if ((current_thread_info()->flags & _TIF_IA32)		\
-	    != new_flags)					\
-		set_thread_flag(TIF_ABI_PENDING);		\
-	else							\
-		clear_thread_flag(TIF_ABI_PENDING);		\
-	/* XXX This overwrites the user set personality */	\
-	current->personality |= force_personality32;		\
-} while (0)
-
-/* Override some function names */
-#define elf_format			elf32_format
-
-#define init_elf_binfmt			init_elf32_binfmt
-#define exit_elf_binfmt			exit_elf32_binfmt
-
-#define load_elf_binary load_elf32_binary
-
-#undef	ELF_PLAT_INIT
-#define ELF_PLAT_INIT(r, load_addr)	elf32_init(r)
-
-#undef start_thread
-#define start_thread(regs,new_rip,new_rsp) do { \
-	asm volatile("movl %0,%%fs" :: "r" (0)); \
-	asm volatile("movl %0,%%es; movl %0,%%ds": :"r" (__USER32_DS)); \
-	load_gs_index(0); \
-	(regs)->rip = (new_rip); \
-	(regs)->rsp = (new_rsp); \
-	(regs)->eflags = 0x200; \
-	(regs)->cs = __USER32_CS; \
-	(regs)->ss = __USER32_DS; \
-	set_fs(USER_DS); \
-} while(0) 
-
-
-#include <linux/module.h>
-
-MODULE_DESCRIPTION("Binary format loader for compatibility with IA32 ELF binaries."); 
-MODULE_AUTHOR("Eric Youngdale, Andi Kleen");
-
-#undef MODULE_DESCRIPTION
-#undef MODULE_AUTHOR
-
-static void elf32_init(struct pt_regs *);
-
-#define ARCH_HAS_SETUP_ADDITIONAL_PAGES 1
-#define arch_setup_additional_pages syscall32_setup_pages
-extern int syscall32_setup_pages(struct linux_binprm *, int exstack);
-
-#include "../../../fs/binfmt_elf.c" 
-
-static void elf32_init(struct pt_regs *regs)
-{
-	struct task_struct *me = current; 
-	regs->rdi = 0;
-	regs->rsi = 0;
-	regs->rdx = 0;
-	regs->rcx = 0;
-	regs->rax = 0;
-	regs->rbx = 0; 
-	regs->rbp = 0; 
-	regs->r8 = regs->r9 = regs->r10 = regs->r11 = regs->r12 =
-		regs->r13 = regs->r14 = regs->r15 = 0; 
-    me->thread.fs = 0; 
-	me->thread.gs = 0;
-	me->thread.fsindex = 0; 
-	me->thread.gsindex = 0;
-    me->thread.ds = __USER_DS; 
-	me->thread.es = __USER_DS;
-}
-
-#ifdef CONFIG_SYSCTL
-/* Register vsyscall32 into the ABI table */
-#include <linux/sysctl.h>
-
-static ctl_table abi_table2[] = {
-	{
-		.procname	= "vsyscall32",
-		.data		= &sysctl_vsyscall32,
-		.maxlen		= sizeof(int),
-		.mode		= 0644,
-		.proc_handler	= proc_dointvec
-	},
-	{}
-};
-
-static ctl_table abi_root_table2[] = {
-	{
-		.ctl_name = CTL_ABI,
-		.procname = "abi",
-		.mode = 0555,
-		.child = abi_table2
-	},
-	{}
-};
-
-static __init int ia32_binfmt_init(void)
-{ 
-	register_sysctl_table(abi_root_table2);
-	return 0;
-}
-__initcall(ia32_binfmt_init);
-#endif

arch/x86/ia32/ia32_signal.c

@@ -29,9 +29,8 @@
 #include <asm/ia32_unistd.h>
 #include <asm/user32.h>
 #include <asm/sigcontext32.h>
-#include <asm/fpu32.h>
 #include <asm/proto.h>
-#include <asm/vsyscall32.h>
+#include <asm/vdso.h>
 
 #define DEBUG_SIG 0
 
@@ -43,7 +42,8 @@ void signal_fault(struct pt_regs *regs, void __user *frame, char *where);
 int copy_siginfo_to_user32(compat_siginfo_t __user *to, siginfo_t *from)
 {
 	int err;
-	if (!access_ok (VERIFY_WRITE, to, sizeof(compat_siginfo_t)))
+
+	if (!access_ok(VERIFY_WRITE, to, sizeof(compat_siginfo_t)))
 		return -EFAULT;
 
 	/* If you change siginfo_t structure, please make sure that
@@ -53,16 +53,19 @@ int copy_siginfo_to_user32(compat_siginfo_t __user *to, siginfo_t *from)
 	   3 ints plus the relevant union member.  */
 	err = __put_user(from->si_signo, &to->si_signo);
 	err |= __put_user(from->si_errno, &to->si_errno);
- 	err |= __put_user((short)from->si_code, &to->si_code);
+	err |= __put_user((short)from->si_code, &to->si_code);
 
 	if (from->si_code < 0) {
 		err |= __put_user(from->si_pid, &to->si_pid);
- 		err |= __put_user(from->si_uid, &to->si_uid);
- 		err |= __put_user(ptr_to_compat(from->si_ptr), &to->si_ptr);
+		err |= __put_user(from->si_uid, &to->si_uid);
+		err |= __put_user(ptr_to_compat(from->si_ptr), &to->si_ptr);
 	} else {
- 		/* First 32bits of unions are always present:
- 		 * si_pid === si_band === si_tid === si_addr(LS half) */
-		err |= __put_user(from->_sifields._pad[0], &to->_sifields._pad[0]);
+		/*
+		 * First 32bits of unions are always present:
+		 * si_pid === si_band === si_tid === si_addr(LS half)
+		 */
+		err |= __put_user(from->_sifields._pad[0],
+				  &to->_sifields._pad[0]);
 		switch (from->si_code >> 16) {
 		case __SI_FAULT >> 16:
 			break;
@@ -76,14 +79,15 @@ int copy_siginfo_to_user32(compat_siginfo_t __user *to, siginfo_t *from)
 			err |= __put_user(from->si_uid, &to->si_uid);
 			break;
 		case __SI_POLL >> 16:
-			err |= __put_user(from->si_fd, &to->si_fd); 
+			err |= __put_user(from->si_fd, &to->si_fd);
 			break;
 		case __SI_TIMER >> 16:
-			err |= __put_user(from->si_overrun, &to->si_overrun); 
+			err |= __put_user(from->si_overrun, &to->si_overrun);
 			err |= __put_user(ptr_to_compat(from->si_ptr),
-					&to->si_ptr);
+					  &to->si_ptr);
 			break;
-		case __SI_RT >> 16: /* This is not generated by the kernel as of now.  */
+			 /* This is not generated by the kernel as of now.  */
+		case __SI_RT >> 16:
 		case __SI_MESGQ >> 16:
 			err |= __put_user(from->si_uid, &to->si_uid);
 			err |= __put_user(from->si_int, &to->si_int);
@@ -97,7 +101,8 @@ int copy_siginfo_from_user32(siginfo_t *to, compat_siginfo_t __user *from)
 {
 	int err;
 	u32 ptr32;
-	if (!access_ok (VERIFY_READ, from, sizeof(compat_siginfo_t)))
+
+	if (!access_ok(VERIFY_READ, from, sizeof(compat_siginfo_t)))
 		return -EFAULT;
 
 	err = __get_user(to->si_signo, &from->si_signo);
@@ -112,8 +117,7 @@ int copy_siginfo_from_user32(siginfo_t *to, compat_siginfo_t __user *from)
 	return err;
 }
 
-asmlinkage long
-sys32_sigsuspend(int history0, int history1, old_sigset_t mask)
+asmlinkage long sys32_sigsuspend(int history0, int history1, old_sigset_t mask)
 {
 	mask &= _BLOCKABLE;
 	spin_lock_irq(&current->sighand->siglock);
@@ -128,36 +132,37 @@ sys32_sigsuspend(int history0, int history1, old_sigset_t mask)
 	return -ERESTARTNOHAND;
 }
 
-asmlinkage long
-sys32_sigaltstack(const stack_ia32_t __user *uss_ptr,
-		  stack_ia32_t __user *uoss_ptr, 
-		  struct pt_regs *regs)
+asmlinkage long sys32_sigaltstack(const stack_ia32_t __user *uss_ptr,
+				  stack_ia32_t __user *uoss_ptr,
+				  struct pt_regs *regs)
 {
-	stack_t uss,uoss; 
+	stack_t uss, uoss;
 	int ret;
-	mm_segment_t seg; 
-	if (uss_ptr) { 
+	mm_segment_t seg;
+
+	if (uss_ptr) {
 		u32 ptr;
-		memset(&uss,0,sizeof(stack_t));
-		if (!access_ok(VERIFY_READ,uss_ptr,sizeof(stack_ia32_t)) ||
+
+		memset(&uss, 0, sizeof(stack_t));
+		if (!access_ok(VERIFY_READ, uss_ptr, sizeof(stack_ia32_t)) ||
 			    __get_user(ptr, &uss_ptr->ss_sp) ||
 			    __get_user(uss.ss_flags, &uss_ptr->ss_flags) ||
 			    __get_user(uss.ss_size, &uss_ptr->ss_size))
 			return -EFAULT;
 		uss.ss_sp = compat_ptr(ptr);
 	}
-	seg = get_fs(); 
-	set_fs(KERNEL_DS); 
-	ret = do_sigaltstack(uss_ptr ? &uss : NULL, &uoss, regs->rsp);
-	set_fs(seg); 
+	seg = get_fs();
+	set_fs(KERNEL_DS);
+	ret = do_sigaltstack(uss_ptr ? &uss : NULL, &uoss, regs->sp);
+	set_fs(seg);
 	if (ret >= 0 && uoss_ptr)  {
-		if (!access_ok(VERIFY_WRITE,uoss_ptr,sizeof(stack_ia32_t)) ||
+		if (!access_ok(VERIFY_WRITE, uoss_ptr, sizeof(stack_ia32_t)) ||
 		    __put_user(ptr_to_compat(uoss.ss_sp), &uoss_ptr->ss_sp) ||
 		    __put_user(uoss.ss_flags, &uoss_ptr->ss_flags) ||
 		    __put_user(uoss.ss_size, &uoss_ptr->ss_size))
 			ret = -EFAULT;
-	} 	
-	return ret;	
+	}
+	return ret;
 }
 
 /*
@@ -186,87 +191,85 @@ struct rt_sigframe
 	char retcode[8];
 };
 
-static int
-ia32_restore_sigcontext(struct pt_regs *regs, struct sigcontext_ia32 __user *sc, unsigned int *peax)
+#define COPY(x)		{ 		\
+	unsigned int reg;		\
+	err |= __get_user(reg, &sc->x);	\
+	regs->x = reg;			\
+}
+
+#define RELOAD_SEG(seg,mask)						\
+	{ unsigned int cur;						\
+	  unsigned short pre;						\
+	  err |= __get_user(pre, &sc->seg);				\
+	  asm volatile("movl %%" #seg ",%0" : "=r" (cur));		\
+	  pre |= mask;							\
+	  if (pre != cur) loadsegment(seg, pre); }
+
+static int ia32_restore_sigcontext(struct pt_regs *regs,
+				   struct sigcontext_ia32 __user *sc,
+				   unsigned int *peax)
 {
-	unsigned int err = 0;
-	
+	unsigned int tmpflags, gs, oldgs, err = 0;
+	struct _fpstate_ia32 __user *buf;
+	u32 tmp;
+
 	/* Always make any pending restarted system calls return -EINTR */
 	current_thread_info()->restart_block.fn = do_no_restart_syscall;
 
 #if DEBUG_SIG
-	printk("SIG restore_sigcontext: sc=%p err(%x) eip(%x) cs(%x) flg(%x)\n",
-		sc, sc->err, sc->eip, sc->cs, sc->eflags);
+	printk(KERN_DEBUG "SIG restore_sigcontext: "
+	       "sc=%p err(%x) eip(%x) cs(%x) flg(%x)\n",
+	       sc, sc->err, sc->ip, sc->cs, sc->flags);
 #endif
-#define COPY(x)		{ \
-	unsigned int reg;			\
-	err |= __get_user(reg, &sc->e ##x);	\
-	regs->r ## x = reg;			\
-}
 
-#define RELOAD_SEG(seg,mask)						\
-	{ unsigned int cur; 						\
-	  unsigned short pre;						\
-	  err |= __get_user(pre, &sc->seg);				\
-    	  asm volatile("movl %%" #seg ",%0" : "=r" (cur));		\
-	  pre |= mask; 							\
-	  if (pre != cur) loadsegment(seg,pre); }
-
-	/* Reload fs and gs if they have changed in the signal handler.
-	   This does not handle long fs/gs base changes in the handler, but 
-	   does not clobber them at least in the normal case. */ 
-	
-	{
-		unsigned gs, oldgs; 
-		err |= __get_user(gs, &sc->gs);
-		gs |= 3; 
-		asm("movl %%gs,%0" : "=r" (oldgs));
-		if (gs != oldgs)
-		load_gs_index(gs); 
-	} 
-	RELOAD_SEG(fs,3);
-	RELOAD_SEG(ds,3);
-	RELOAD_SEG(es,3);
+	/*
+	 * Reload fs and gs if they have changed in the signal
+	 * handler.  This does not handle long fs/gs base changes in
+	 * the handler, but does not clobber them at least in the
+	 * normal case.
+	 */
+	err |= __get_user(gs, &sc->gs);
+	gs |= 3;
+	asm("movl %%gs,%0" : "=r" (oldgs));
+	if (gs != oldgs)
+		load_gs_index(gs);
+
+	RELOAD_SEG(fs, 3);
+	RELOAD_SEG(ds, 3);
+	RELOAD_SEG(es, 3);
 
 	COPY(di); COPY(si); COPY(bp); COPY(sp); COPY(bx);
 	COPY(dx); COPY(cx); COPY(ip);
-	/* Don't touch extended registers */ 
-	
-	err |= __get_user(regs->cs, &sc->cs); 
-	regs->cs |= 3;  
-	err |= __get_user(regs->ss, &sc->ss); 
-	regs->ss |= 3; 
-
-	{
-		unsigned int tmpflags;
-		err |= __get_user(tmpflags, &sc->eflags);
-		regs->eflags = (regs->eflags & ~0x40DD5) | (tmpflags & 0x40DD5);
-		regs->orig_rax = -1;		/* disable syscall checks */
-	}
+	/* Don't touch extended registers */
+
+	err |= __get_user(regs->cs, &sc->cs);
+	regs->cs |= 3;
+	err |= __get_user(regs->ss, &sc->ss);
+	regs->ss |= 3;
+
+	err |= __get_user(tmpflags, &sc->flags);
+	regs->flags = (regs->flags & ~0x40DD5) | (tmpflags & 0x40DD5);
+	/* disable syscall checks */
+	regs->orig_ax = -1;
+
+	err |= __get_user(tmp, &sc->fpstate);
+	buf = compat_ptr(tmp);
+	if (buf) {
+		if (!access_ok(VERIFY_READ, buf, sizeof(*buf)))
+			goto badframe;
+		err |= restore_i387_ia32(buf);
+	} else {
+		struct task_struct *me = current;
 
-	{
-		u32 tmp;
-		struct _fpstate_ia32 __user * buf;
-		err |= __get_user(tmp, &sc->fpstate);
-		buf = compat_ptr(tmp);
-		if (buf) {
-			if (!access_ok(VERIFY_READ, buf, sizeof(*buf)))
-				goto badframe;
-			err |= restore_i387_ia32(current, buf, 0);
-		} else {
-			struct task_struct *me = current;
-			if (used_math()) {
-				clear_fpu(me);
-				clear_used_math();
-			}
+		if (used_math()) {
+			clear_fpu(me);
+			clear_used_math();
 		}
 	}
 
-	{ 
-		u32 tmp;
-		err |= __get_user(tmp, &sc->eax);
-		*peax = tmp;
-	}
+	err |= __get_user(tmp, &sc->ax);
+	*peax = tmp;
+
 	return err;
 
 badframe:
@@ -275,15 +278,16 @@ badframe:
 
 asmlinkage long sys32_sigreturn(struct pt_regs *regs)
 {
-	struct sigframe __user *frame = (struct sigframe __user *)(regs->rsp-8);
+	struct sigframe __user *frame = (struct sigframe __user *)(regs->sp-8);
 	sigset_t set;
-	unsigned int eax;
+	unsigned int ax;
 
 	if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
 		goto badframe;
 	if (__get_user(set.sig[0], &frame->sc.oldmask)
 	    || (_COMPAT_NSIG_WORDS > 1
-		&& __copy_from_user((((char *) &set.sig) + 4), &frame->extramask,
+		&& __copy_from_user((((char *) &set.sig) + 4),
+				    &frame->extramask,
 				    sizeof(frame->extramask))))
 		goto badframe;
 
@@ -292,24 +296,24 @@ asmlinkage long sys32_sigreturn(struct pt_regs *regs)
 	current->blocked = set;
 	recalc_sigpending();
 	spin_unlock_irq(&current->sighand->siglock);
-	
-	if (ia32_restore_sigcontext(regs, &frame->sc, &eax))
+
+	if (ia32_restore_sigcontext(regs, &frame->sc, &ax))
 		goto badframe;
-	return eax;
+	return ax;
 
 badframe:
 	signal_fault(regs, frame, "32bit sigreturn");
 	return 0;
-}	
+}
 
 asmlinkage long sys32_rt_sigreturn(struct pt_regs *regs)
 {
 	struct rt_sigframe __user *frame;
 	sigset_t set;
-	unsigned int eax;
+	unsigned int ax;
 	struct pt_regs tregs;
 
-	frame = (struct rt_sigframe __user *)(regs->rsp - 4);
+	frame = (struct rt_sigframe __user *)(regs->sp - 4);
 
 	if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
 		goto badframe;
@@ -321,28 +325,28 @@ asmlinkage long sys32_rt_sigreturn(struct pt_regs *regs)
 	current->blocked = set;
 	recalc_sigpending();
 	spin_unlock_irq(&current->sighand->siglock);
-	
-	if (ia32_restore_sigcontext(regs, &frame->uc.uc_mcontext, &eax))
+
+	if (ia32_restore_sigcontext(regs, &frame->uc.uc_mcontext, &ax))
 		goto badframe;
 
 	tregs = *regs;
 	if (sys32_sigaltstack(&frame->uc.uc_stack, NULL, &tregs) == -EFAULT)
 		goto badframe;
 
-	return eax;
+	return ax;
 
 badframe:
-	signal_fault(regs,frame,"32bit rt sigreturn");
+	signal_fault(regs, frame, "32bit rt sigreturn");
 	return 0;
-}	
+}
 
 /*
  * Set up a signal frame.
  */
 
-static int
-ia32_setup_sigcontext(struct sigcontext_ia32 __user *sc, struct _fpstate_ia32 __user *fpstate,
-		 struct pt_regs *regs, unsigned int mask)
+static int ia32_setup_sigcontext(struct sigcontext_ia32 __user *sc,
+				 struct _fpstate_ia32 __user *fpstate,
+				 struct pt_regs *regs, unsigned int mask)
 {
 	int tmp, err = 0;
 
@@ -356,26 +360,26 @@ ia32_setup_sigcontext(struct sigcontext_ia32 __user *sc, struct _fpstate_ia32 __
 	__asm__("movl %%es,%0" : "=r"(tmp): "0"(tmp));
 	err |= __put_user(tmp, (unsigned int __user *)&sc->es);
 
-	err |= __put_user((u32)regs->rdi, &sc->edi);
-	err |= __put_user((u32)regs->rsi, &sc->esi);
-	err |= __put_user((u32)regs->rbp, &sc->ebp);
-	err |= __put_user((u32)regs->rsp, &sc->esp);
-	err |= __put_user((u32)regs->rbx, &sc->ebx);
-	err |= __put_user((u32)regs->rdx, &sc->edx);
-	err |= __put_user((u32)regs->rcx, &sc->ecx);
-	err |= __put_user((u32)regs->rax, &sc->eax);
+	err |= __put_user((u32)regs->di, &sc->di);
+	err |= __put_user((u32)regs->si, &sc->si);
+	err |= __put_user((u32)regs->bp, &sc->bp);
+	err |= __put_user((u32)regs->sp, &sc->sp);
+	err |= __put_user((u32)regs->bx, &sc->bx);
+	err |= __put_user((u32)regs->dx, &sc->dx);
+	err |= __put_user((u32)regs->cx, &sc->cx);
+	err |= __put_user((u32)regs->ax, &sc->ax);
 	err |= __put_user((u32)regs->cs, &sc->cs);
 	err |= __put_user((u32)regs->ss, &sc->ss);
 	err |= __put_user(current->thread.trap_no, &sc->trapno);
 	err |= __put_user(current->thread.error_code, &sc->err);
-	err |= __put_user((u32)regs->rip, &sc->eip);
-	err |= __put_user((u32)regs->eflags, &sc->eflags);
-	err |= __put_user((u32)regs->rsp, &sc->esp_at_signal);
+	err |= __put_user((u32)regs->ip, &sc->ip);
+	err |= __put_user((u32)regs->flags, &sc->flags);
+	err |= __put_user((u32)regs->sp, &sc->sp_at_signal);
 
-	tmp = save_i387_ia32(current, fpstate, regs, 0);
+	tmp = save_i387_ia32(fpstate);
 	if (tmp < 0)
 		err = -EFAULT;
-	else { 
+	else {
 		clear_used_math();
 		stts();
 		err |= __put_user(ptr_to_compat(tmp ? fpstate : NULL),
@@ -392,40 +396,53 @@ ia32_setup_sigcontext(struct sigcontext_ia32 __user *sc, struct _fpstate_ia32 __
 /*
  * Determine which stack to use..
  */
-static void __user *
-get_sigframe(struct k_sigaction *ka, struct pt_regs * regs, size_t frame_size)
+static void __user *get_sigframe(struct k_sigaction *ka, struct pt_regs *regs,
+				 size_t frame_size)
 {
-	unsigned long rsp;
+	unsigned long sp;
 
 	/* Default to using normal stack */
-	rsp = regs->rsp;
+	sp = regs->sp;
 
 	/* This is the X/Open sanctioned signal stack switching.  */
 	if (ka->sa.sa_flags & SA_ONSTACK) {
-		if (sas_ss_flags(rsp) == 0)
-			rsp = current->sas_ss_sp + current->sas_ss_size;
+		if (sas_ss_flags(sp) == 0)
+			sp = current->sas_ss_sp + current->sas_ss_size;
 	}
 
 	/* This is the legacy signal stack switching. */
 	else if ((regs->ss & 0xffff) != __USER_DS &&
 		!(ka->sa.sa_flags & SA_RESTORER) &&
-		 ka->sa.sa_restorer) {
-		rsp = (unsigned long) ka->sa.sa_restorer;
-	}
+		 ka->sa.sa_restorer)
+		sp = (unsigned long) ka->sa.sa_restorer;
 
-	rsp -= frame_size;
+	sp -= frame_size;
 	/* Align the stack pointer according to the i386 ABI,
 	 * i.e. so that on function entry ((sp + 4) & 15) == 0. */
-	rsp = ((rsp + 4) & -16ul) - 4;
-	return (void __user *) rsp;
+	sp = ((sp + 4) & -16ul) - 4;
+	return (void __user *) sp;
 }
 
 int ia32_setup_frame(int sig, struct k_sigaction *ka,
-		     compat_sigset_t *set, struct pt_regs * regs)
+		     compat_sigset_t *set, struct pt_regs *regs)
 {
 	struct sigframe __user *frame;
+	void __user *restorer;
 	int err = 0;
 
+	/* copy_to_user optimizes that into a single 8 byte store */
+	static const struct {
+		u16 poplmovl;
+		u32 val;
+		u16 int80;
+		u16 pad;
+	} __attribute__((packed)) code = {
+		0xb858,		 /* popl %eax ; movl $...,%eax */
+		__NR_ia32_sigreturn,
+		0x80cd,		/* int $0x80 */
+		0,
+	};
+
 	frame = get_sigframe(ka, regs, sizeof(*frame));
 
 	if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
@@ -443,64 +460,53 @@ int ia32_setup_frame(int sig, struct k_sigaction *ka,
 	if (_COMPAT_NSIG_WORDS > 1) {
 		err |= __copy_to_user(frame->extramask, &set->sig[1],
 				      sizeof(frame->extramask));
+		if (err)
+			goto give_sigsegv;
 	}
-	if (err)
-		goto give_sigsegv;
 
-	/* Return stub is in 32bit vsyscall page */
-	{ 
-		void __user *restorer;
+	if (ka->sa.sa_flags & SA_RESTORER) {
+		restorer = ka->sa.sa_restorer;
+	} else {
+		/* Return stub is in 32bit vsyscall page */
 		if (current->binfmt->hasvdso)
-			restorer = VSYSCALL32_SIGRETURN;
+			restorer = VDSO32_SYMBOL(current->mm->context.vdso,
+						 sigreturn);
 		else
-			restorer = (void *)&frame->retcode;
-		if (ka->sa.sa_flags & SA_RESTORER)
-			restorer = ka->sa.sa_restorer;       
-		err |= __put_user(ptr_to_compat(restorer), &frame->pretcode);
-	}
-	/* These are actually not used anymore, but left because some 
-	   gdb versions depend on them as a marker. */
-	{ 
-		/* copy_to_user optimizes that into a single 8 byte store */
-		static const struct { 
-			u16 poplmovl;
-			u32 val;
-			u16 int80;    
-			u16 pad; 
-		} __attribute__((packed)) code = { 
-			0xb858,		 /* popl %eax ; movl $...,%eax */
-			__NR_ia32_sigreturn,   
-			0x80cd,		/* int $0x80 */
-			0,
-		}; 
-		err |= __copy_to_user(frame->retcode, &code, 8); 
+			restorer = &frame->retcode;
 	}
+	err |= __put_user(ptr_to_compat(restorer), &frame->pretcode);
+
+	/*
+	 * These are actually not used anymore, but left because some
+	 * gdb versions depend on them as a marker.
+	 */
+	err |= __copy_to_user(frame->retcode, &code, 8);
 	if (err)
 		goto give_sigsegv;
 
 	/* Set up registers for signal handler */
-	regs->rsp = (unsigned long) frame;
-	regs->rip = (unsigned long) ka->sa.sa_handler;
+	regs->sp = (unsigned long) frame;
+	regs->ip = (unsigned long) ka->sa.sa_handler;
 
 	/* Make -mregparm=3 work */
-	regs->rax = sig;
-	regs->rdx = 0;
-	regs->rcx = 0;
+	regs->ax = sig;
+	regs->dx = 0;
+	regs->cx = 0;
 
-	asm volatile("movl %0,%%ds" :: "r" (__USER32_DS)); 
-	asm volatile("movl %0,%%es" :: "r" (__USER32_DS)); 
+	asm volatile("movl %0,%%ds" :: "r" (__USER32_DS));
+	asm volatile("movl %0,%%es" :: "r" (__USER32_DS));
 
-	regs->cs = __USER32_CS; 
-	regs->ss = __USER32_DS; 
+	regs->cs = __USER32_CS;
+	regs->ss = __USER32_DS;
 
 	set_fs(USER_DS);
-	regs->eflags &= ~TF_MASK;
+	regs->flags &= ~X86_EFLAGS_TF;
 	if (test_thread_flag(TIF_SINGLESTEP))
 		ptrace_notify(SIGTRAP);
 
 #if DEBUG_SIG
-	printk("SIG deliver (%s:%d): sp=%p pc=%lx ra=%u\n",
-		current->comm, current->pid, frame, regs->rip, frame->pretcode);
+	printk(KERN_DEBUG "SIG deliver (%s:%d): sp=%p pc=%lx ra=%u\n",
+	       current->comm, current->pid, frame, regs->ip, frame->pretcode);
 #endif
 
 	return 0;
@@ -511,25 +517,34 @@ give_sigsegv:
 }
 
 int ia32_setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
-			compat_sigset_t *set, struct pt_regs * regs)
+			compat_sigset_t *set, struct pt_regs *regs)
 {
 	struct rt_sigframe __user *frame;
+	struct exec_domain *ed = current_thread_info()->exec_domain;
+	void __user *restorer;
 	int err = 0;
 
+	/* __copy_to_user optimizes that into a single 8 byte store */
+	static const struct {
+		u8 movl;
+		u32 val;
+		u16 int80;
+		u16 pad;
+		u8  pad2;
+	} __attribute__((packed)) code = {
+		0xb8,
+		__NR_ia32_rt_sigreturn,
+		0x80cd,
+		0,
+	};
+
 	frame = get_sigframe(ka, regs, sizeof(*frame));
 
 	if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
 		goto give_sigsegv;
 
-	{
-		struct exec_domain *ed = current_thread_info()->exec_domain;
-		err |= __put_user((ed
-		    	   && ed->signal_invmap
-		    	   && sig < 32
-		    	   ? ed->signal_invmap[sig]
-			   : sig),
-			  &frame->sig);
-	}
+	err |= __put_user((ed && ed->signal_invmap && sig < 32
+			   ? ed->signal_invmap[sig] : sig), &frame->sig);
 	err |= __put_user(ptr_to_compat(&frame->info), &frame->pinfo);
 	err |= __put_user(ptr_to_compat(&frame->uc), &frame->puc);
 	err |= copy_siginfo_to_user32(&frame->info, info);
@@ -540,73 +555,58 @@ int ia32_setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 	err |= __put_user(0, &frame->uc.uc_flags);
 	err |= __put_user(0, &frame->uc.uc_link);
 	err |= __put_user(current->sas_ss_sp, &frame->uc.uc_stack.ss_sp);
-	err |= __put_user(sas_ss_flags(regs->rsp),
+	err |= __put_user(sas_ss_flags(regs->sp),
 			  &frame->uc.uc_stack.ss_flags);
 	err |= __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size);
 	err |= ia32_setup_sigcontext(&frame->uc.uc_mcontext, &frame->fpstate,
-			        regs, set->sig[0]);
+				     regs, set->sig[0]);
 	err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
 	if (err)
 		goto give_sigsegv;
 
-	
-	{ 
-		void __user *restorer = VSYSCALL32_RTSIGRETURN; 
-		if (ka->sa.sa_flags & SA_RESTORER)
-			restorer = ka->sa.sa_restorer;       
-		err |= __put_user(ptr_to_compat(restorer), &frame->pretcode);
-	}
-
-	/* This is movl $,%eax ; int $0x80 */
-	/* Not actually used anymore, but left because some gdb versions
-	   need it. */ 
-	{ 
-		/* __copy_to_user optimizes that into a single 8 byte store */
-		static const struct { 
-			u8 movl; 
-			u32 val; 
-			u16 int80; 
-			u16 pad;
-			u8  pad2;				
-		} __attribute__((packed)) code = { 
-			0xb8,
-			__NR_ia32_rt_sigreturn,
-			0x80cd,
-			0,
-		}; 
-		err |= __copy_to_user(frame->retcode, &code, 8); 
-	} 
+	if (ka->sa.sa_flags & SA_RESTORER)
+		restorer = ka->sa.sa_restorer;
+	else
+		restorer = VDSO32_SYMBOL(current->mm->context.vdso,
+					 rt_sigreturn);
+	err |= __put_user(ptr_to_compat(restorer), &frame->pretcode);
+
+	/*
+	 * Not actually used anymore, but left because some gdb
+	 * versions need it.
+	 */
+	err |= __copy_to_user(frame->retcode, &code, 8);
 	if (err)
 		goto give_sigsegv;
 
 	/* Set up registers for signal handler */
-	regs->rsp = (unsigned long) frame;
-	regs->rip = (unsigned long) ka->sa.sa_handler;
+	regs->sp = (unsigned long) frame;
+	regs->ip = (unsigned long) ka->sa.sa_handler;
 
 	/* Make -mregparm=3 work */
-	regs->rax = sig;
-	regs->rdx = (unsigned long) &frame->info;
-	regs->rcx = (unsigned long) &frame->uc;
+	regs->ax = sig;
+	regs->dx = (unsigned long) &frame->info;
+	regs->cx = (unsigned long) &frame->uc;
 
 	/* Make -mregparm=3 work */
-	regs->rax = sig;
-	regs->rdx = (unsigned long) &frame->info;
-	regs->rcx = (unsigned long) &frame->uc;
+	regs->ax = sig;
+	regs->dx = (unsigned long) &frame->info;
+	regs->cx = (unsigned long) &frame->uc;
+
+	asm volatile("movl %0,%%ds" :: "r" (__USER32_DS));
+	asm volatile("movl %0,%%es" :: "r" (__USER32_DS));
 
-	asm volatile("movl %0,%%ds" :: "r" (__USER32_DS)); 
-	asm volatile("movl %0,%%es" :: "r" (__USER32_DS)); 
-	
-	regs->cs = __USER32_CS; 
-	regs->ss = __USER32_DS; 
+	regs->cs = __USER32_CS;
+	regs->ss = __USER32_DS;
 
 	set_fs(USER_DS);
-	regs->eflags &= ~TF_MASK;
+	regs->flags &= ~X86_EFLAGS_TF;
 	if (test_thread_flag(TIF_SINGLESTEP))
 		ptrace_notify(SIGTRAP);
 
 #if DEBUG_SIG
-	printk("SIG deliver (%s:%d): sp=%p pc=%lx ra=%u\n",
-		current->comm, current->pid, frame, regs->rip, frame->pretcode);
+	printk(KERN_DEBUG "SIG deliver (%s:%d): sp=%p pc=%lx ra=%u\n",
+	       current->comm, current->pid, frame, regs->ip, frame->pretcode);
 #endif
 
 	return 0;

arch/x86/ia32/ia32entry.S

@@ -12,7 +12,6 @@
 #include <asm/ia32_unistd.h>	
 #include <asm/thread_info.h>	
 #include <asm/segment.h>
-#include <asm/vsyscall32.h>
 #include <asm/irqflags.h>
 #include <linux/linkage.h>
 
@@ -104,7 +103,7 @@ ENTRY(ia32_sysenter_target)
 	pushfq
 	CFI_ADJUST_CFA_OFFSET 8
 	/*CFI_REL_OFFSET rflags,0*/
-	movl	$VSYSCALL32_SYSEXIT, %r10d
+	movl	8*3-THREAD_SIZE+threadinfo_sysenter_return(%rsp), %r10d
 	CFI_REGISTER rip,r10
 	pushq	$__USER32_CS
 	CFI_ADJUST_CFA_OFFSET 8
@@ -142,6 +141,8 @@ sysenter_do_call:
 	andl    $~TS_COMPAT,threadinfo_status(%r10)
 	/* clear IF, that popfq doesn't enable interrupts early */
 	andl  $~0x200,EFLAGS-R11(%rsp) 
+	movl	RIP-R11(%rsp),%edx		/* User %eip */
+	CFI_REGISTER rip,rdx
 	RESTORE_ARGS 1,24,1,1,1,1
 	popfq
 	CFI_ADJUST_CFA_OFFSET -8
@@ -149,8 +150,6 @@ sysenter_do_call:
 	popq	%rcx				/* User %esp */
 	CFI_ADJUST_CFA_OFFSET -8
 	CFI_REGISTER rsp,rcx
-	movl	$VSYSCALL32_SYSEXIT,%edx	/* User %eip */
-	CFI_REGISTER rip,rdx
 	TRACE_IRQS_ON
 	swapgs
 	sti		/* sti only takes effect after the next instruction */
@@ -644,8 +643,8 @@ ia32_sys_call_table:
 	.quad compat_sys_futex		/* 240 */
 	.quad compat_sys_sched_setaffinity
 	.quad compat_sys_sched_getaffinity
-	.quad sys32_set_thread_area
-	.quad sys32_get_thread_area
+	.quad sys_set_thread_area
+	.quad sys_get_thread_area
 	.quad compat_sys_io_setup	/* 245 */
 	.quad sys_io_destroy
 	.quad compat_sys_io_getevents

arch/x86/ia32/ipc32.c

@@ -9,9 +9,8 @@
 #include <linux/ipc.h>
 #include <linux/compat.h>
 
-asmlinkage long
-sys32_ipc(u32 call, int first, int second, int third,
-		compat_uptr_t ptr, u32 fifth)
+asmlinkage long sys32_ipc(u32 call, int first, int second, int third,
+			  compat_uptr_t ptr, u32 fifth)
 {
 	int version;
 
@@ -19,36 +18,35 @@ sys32_ipc(u32 call, int first, int second, int third,
 	call &= 0xffff;
 
 	switch (call) {
-	      case SEMOP:
+	case SEMOP:
 		/* struct sembuf is the same on 32 and 64bit :)) */
 		return sys_semtimedop(first, compat_ptr(ptr), second, NULL);
-	      case SEMTIMEDOP:
+	case SEMTIMEDOP:
 		return compat_sys_semtimedop(first, compat_ptr(ptr), second,
 						compat_ptr(fifth));
-	      case SEMGET:
+	case SEMGET:
 		return sys_semget(first, second, third);
-	      case SEMCTL:
+	case SEMCTL:
 		return compat_sys_semctl(first, second, third, compat_ptr(ptr));
 
-	      case MSGSND:
+	case MSGSND:
 		return compat_sys_msgsnd(first, second, third, compat_ptr(ptr));
-	      case MSGRCV:
+	case MSGRCV:
 		return compat_sys_msgrcv(first, second, fifth, third,
 					 version, compat_ptr(ptr));
-	      case MSGGET:
+	case MSGGET:
 		return sys_msgget((key_t) first, second);
-	      case MSGCTL:
+	case MSGCTL:
 		return compat_sys_msgctl(first, second, compat_ptr(ptr));
 
-	      case SHMAT:
+	case SHMAT:
 		return compat_sys_shmat(first, second, third, version,
 					compat_ptr(ptr));
-		break;
-	      case SHMDT:
+	case SHMDT:
 		return sys_shmdt(compat_ptr(ptr));
-	      case SHMGET:
+	case SHMGET:
 		return sys_shmget(first, (unsigned)second, third);
-	      case SHMCTL:
+	case SHMCTL:
 		return compat_sys_shmctl(first, second, compat_ptr(ptr));
 	}
 	return -ENOSYS;

arch/x86/ia32/mmap32.c

@@ -1,79 +0,0 @@
-/*
- *  linux/arch/x86_64/ia32/mm/mmap.c
- *
- *  flexible mmap layout support
- *
- * Based on the i386 version which was
- *
- * Copyright 2003-2004 Red Hat Inc., Durham, North Carolina.
- * All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- *
- * Started by Ingo Molnar <mingo@elte.hu>
- */
-
-#include <linux/personality.h>
-#include <linux/mm.h>
-#include <linux/random.h>
-#include <linux/sched.h>
-
-/*
- * Top of mmap area (just below the process stack).
- *
- * Leave an at least ~128 MB hole.
- */
-#define MIN_GAP (128*1024*1024)
-#define MAX_GAP (TASK_SIZE/6*5)
-
-static inline unsigned long mmap_base(struct mm_struct *mm)
-{
-	unsigned long gap = current->signal->rlim[RLIMIT_STACK].rlim_cur;
-	unsigned long random_factor = 0;
-
-	if (current->flags & PF_RANDOMIZE)
-		random_factor = get_random_int() % (1024*1024);
-
-	if (gap < MIN_GAP)
-		gap = MIN_GAP;
-	else if (gap > MAX_GAP)
-		gap = MAX_GAP;
-
-	return PAGE_ALIGN(TASK_SIZE - gap - random_factor);
-}
-
-/*
- * This function, called very early during the creation of a new
- * process VM image, sets up which VM layout function to use:
- */
-void ia32_pick_mmap_layout(struct mm_struct *mm)
-{
-	/*
-	 * Fall back to the standard layout if the personality
-	 * bit is set, or if the expected stack growth is unlimited:
-	 */
-	if (sysctl_legacy_va_layout ||
-			(current->personality & ADDR_COMPAT_LAYOUT) ||
-			current->signal->rlim[RLIMIT_STACK].rlim_cur == RLIM_INFINITY) {
-		mm->mmap_base = TASK_UNMAPPED_BASE;
-		mm->get_unmapped_area = arch_get_unmapped_area;
-		mm->unmap_area = arch_unmap_area;
-	} else {
-		mm->mmap_base = mmap_base(mm);
-		mm->get_unmapped_area = arch_get_unmapped_area_topdown;
-		mm->unmap_area = arch_unmap_area_topdown;
-	}
-}

arch/x86/ia32/ptrace32.c

@@ -1,404 +0,0 @@
-/* 
- * 32bit ptrace for x86-64.
- *
- * Copyright 2001,2002 Andi Kleen, SuSE Labs.
- * Some parts copied from arch/i386/kernel/ptrace.c. See that file for earlier 
- * copyright.
- * 
- * This allows to access 64bit processes too; but there is no way to see the extended 
- * register contents.
- */ 
-
-#include <linux/kernel.h>
-#include <linux/stddef.h>
-#include <linux/sched.h>
-#include <linux/syscalls.h>
-#include <linux/unistd.h>
-#include <linux/mm.h>
-#include <linux/err.h>
-#include <linux/ptrace.h>
-#include <asm/ptrace.h>
-#include <asm/compat.h>
-#include <asm/uaccess.h>
-#include <asm/user32.h>
-#include <asm/user.h>
-#include <asm/errno.h>
-#include <asm/debugreg.h>
-#include <asm/i387.h>
-#include <asm/fpu32.h>
-#include <asm/ia32.h>
-
-/*
- * Determines which flags the user has access to [1 = access, 0 = no access].
- * Prohibits changing ID(21), VIP(20), VIF(19), VM(17), IOPL(12-13), IF(9).
- * Also masks reserved bits (31-22, 15, 5, 3, 1).
- */
-#define FLAG_MASK 0x54dd5UL
-
-#define R32(l,q) \
-	case offsetof(struct user32, regs.l): stack[offsetof(struct pt_regs, q)/8] = val; break
-
-static int putreg32(struct task_struct *child, unsigned regno, u32 val)
-{
-	int i;
-	__u64 *stack = (__u64 *)task_pt_regs(child);
-
-	switch (regno) {
-	case offsetof(struct user32, regs.fs):
-		if (val && (val & 3) != 3) return -EIO; 
-		child->thread.fsindex = val & 0xffff;
-		break;
-	case offsetof(struct user32, regs.gs):
-		if (val && (val & 3) != 3) return -EIO; 
-		child->thread.gsindex = val & 0xffff;
-		break;
-	case offsetof(struct user32, regs.ds):
-		if (val && (val & 3) != 3) return -EIO; 
-		child->thread.ds = val & 0xffff;
-		break;
-	case offsetof(struct user32, regs.es):
-		child->thread.es = val & 0xffff;
-		break;
-	case offsetof(struct user32, regs.ss): 
-		if ((val & 3) != 3) return -EIO;
-        	stack[offsetof(struct pt_regs, ss)/8] = val & 0xffff;
-		break;
-	case offsetof(struct user32, regs.cs): 
-		if ((val & 3) != 3) return -EIO;
-		stack[offsetof(struct pt_regs, cs)/8] = val & 0xffff;
-		break;
-
-	R32(ebx, rbx); 
-	R32(ecx, rcx);
-	R32(edx, rdx);
-	R32(edi, rdi);
-	R32(esi, rsi);
-	R32(ebp, rbp);
-	R32(eax, rax);
-	R32(orig_eax, orig_rax);
-	R32(eip, rip);
-	R32(esp, rsp);
-
-	case offsetof(struct user32, regs.eflags): {
-		__u64 *flags = &stack[offsetof(struct pt_regs, eflags)/8];
-		val &= FLAG_MASK;
-		*flags = val | (*flags & ~FLAG_MASK);
-		break;
-	}
-
-	case offsetof(struct user32, u_debugreg[4]): 
-	case offsetof(struct user32, u_debugreg[5]):
-		return -EIO;
-
-	case offsetof(struct user32, u_debugreg[0]):
-		child->thread.debugreg0 = val;
-		break;
-
-	case offsetof(struct user32, u_debugreg[1]):
-		child->thread.debugreg1 = val;
-		break;
-
-	case offsetof(struct user32, u_debugreg[2]):
-		child->thread.debugreg2 = val;
-		break;
-
-	case offsetof(struct user32, u_debugreg[3]):
-		child->thread.debugreg3 = val;
-		break;
-
-	case offsetof(struct user32, u_debugreg[6]):
-		child->thread.debugreg6 = val;
-		break; 
-
-	case offsetof(struct user32, u_debugreg[7]):
-		val &= ~DR_CONTROL_RESERVED;
-		/* See arch/i386/kernel/ptrace.c for an explanation of
-		 * this awkward check.*/
-		for(i=0; i<4; i++)
-			if ((0x5454 >> ((val >> (16 + 4*i)) & 0xf)) & 1)
-			       return -EIO;
-		child->thread.debugreg7 = val; 
-		if (val)
-			set_tsk_thread_flag(child, TIF_DEBUG);
-		else
-			clear_tsk_thread_flag(child, TIF_DEBUG);
-		break; 
-		    
-	default:
-		if (regno > sizeof(struct user32) || (regno & 3))
-			return -EIO;
-	       
-		/* Other dummy fields in the virtual user structure are ignored */ 
-		break; 		
-	}
-	return 0;
-}
-
-#undef R32
-
-#define R32(l,q) \
-	case offsetof(struct user32, regs.l): *val = stack[offsetof(struct pt_regs, q)/8]; break
-
-static int getreg32(struct task_struct *child, unsigned regno, u32 *val)
-{
-	__u64 *stack = (__u64 *)task_pt_regs(child);
-
-	switch (regno) {
-	case offsetof(struct user32, regs.fs):
-	        *val = child->thread.fsindex;
-		break;
-	case offsetof(struct user32, regs.gs):
-		*val = child->thread.gsindex;
-		break;
-	case offsetof(struct user32, regs.ds):
-		*val = child->thread.ds;
-		break;
-	case offsetof(struct user32, regs.es):
-		*val = child->thread.es;
-		break;
-
-	R32(cs, cs);
-	R32(ss, ss);
-	R32(ebx, rbx); 
-	R32(ecx, rcx);
-	R32(edx, rdx);
-	R32(edi, rdi);
-	R32(esi, rsi);
-	R32(ebp, rbp);
-	R32(eax, rax);
-	R32(orig_eax, orig_rax);
-	R32(eip, rip);
-	R32(eflags, eflags);
-	R32(esp, rsp);
-
-	case offsetof(struct user32, u_debugreg[0]): 
-		*val = child->thread.debugreg0; 
-		break; 
-	case offsetof(struct user32, u_debugreg[1]): 
-		*val = child->thread.debugreg1; 
-		break; 
-	case offsetof(struct user32, u_debugreg[2]): 
-		*val = child->thread.debugreg2; 
-		break; 
-	case offsetof(struct user32, u_debugreg[3]): 
-		*val = child->thread.debugreg3; 
-		break; 
-	case offsetof(struct user32, u_debugreg[6]): 
-		*val = child->thread.debugreg6; 
-		break; 
-	case offsetof(struct user32, u_debugreg[7]): 
-		*val = child->thread.debugreg7; 
-		break; 
-		    
-	default:
-		if (regno > sizeof(struct user32) || (regno & 3))
-			return -EIO;
-
-		/* Other dummy fields in the virtual user structure are ignored */ 
-		*val = 0;
-		break; 		
-	}
-	return 0;
-}
-
-#undef R32
-
-static long ptrace32_siginfo(unsigned request, u32 pid, u32 addr, u32 data)
-{
-	int ret;
-	compat_siginfo_t __user *si32 = compat_ptr(data);
-	siginfo_t ssi; 
-	siginfo_t __user *si = compat_alloc_user_space(sizeof(siginfo_t));
-	if (request == PTRACE_SETSIGINFO) {
-		memset(&ssi, 0, sizeof(siginfo_t));
-		ret = copy_siginfo_from_user32(&ssi, si32);
-		if (ret)
-			return ret;
-		if (copy_to_user(si, &ssi, sizeof(siginfo_t)))
-			return -EFAULT;
-	}
-	ret = sys_ptrace(request, pid, addr, (unsigned long)si);
-	if (ret)
-		return ret;
-	if (request == PTRACE_GETSIGINFO) {
-		if (copy_from_user(&ssi, si, sizeof(siginfo_t)))
-			return -EFAULT;
-		ret = copy_siginfo_to_user32(si32, &ssi);
-	}
-	return ret;
-}
-
-asmlinkage long sys32_ptrace(long request, u32 pid, u32 addr, u32 data)
-{
-	struct task_struct *child;
-	struct pt_regs *childregs; 
-	void __user *datap = compat_ptr(data);
-	int ret;
-	__u32 val;
-
-	switch (request) { 
-	case PTRACE_TRACEME:
-	case PTRACE_ATTACH:
-	case PTRACE_KILL:
-	case PTRACE_CONT:
-	case PTRACE_SINGLESTEP:
-	case PTRACE_DETACH:
-	case PTRACE_SYSCALL:
-	case PTRACE_OLDSETOPTIONS:
-	case PTRACE_SETOPTIONS:
-	case PTRACE_SET_THREAD_AREA:
-	case PTRACE_GET_THREAD_AREA:
-		return sys_ptrace(request, pid, addr, data); 
-
-	default:
-		return -EINVAL;
-
-	case PTRACE_PEEKTEXT:
-	case PTRACE_PEEKDATA:
-	case PTRACE_POKEDATA:
-	case PTRACE_POKETEXT:
-	case PTRACE_POKEUSR:       
-	case PTRACE_PEEKUSR:
-	case PTRACE_GETREGS:
-	case PTRACE_SETREGS:
-	case PTRACE_SETFPREGS:
-	case PTRACE_GETFPREGS:
-	case PTRACE_SETFPXREGS:
-	case PTRACE_GETFPXREGS:
-	case PTRACE_GETEVENTMSG:
-		break;
-
-	case PTRACE_SETSIGINFO:
-	case PTRACE_GETSIGINFO:
-		return ptrace32_siginfo(request, pid, addr, data);
-	}
-
-	child = ptrace_get_task_struct(pid);
-	if (IS_ERR(child))
-		return PTR_ERR(child);
-
-	ret = ptrace_check_attach(child, request == PTRACE_KILL);
-	if (ret < 0)
-		goto out;
-
-	childregs = task_pt_regs(child);
-
-	switch (request) {
-	case PTRACE_PEEKDATA:
-	case PTRACE_PEEKTEXT:
-		ret = 0;
-		if (access_process_vm(child, addr, &val, sizeof(u32), 0)!=sizeof(u32))
-			ret = -EIO;
-		else
-			ret = put_user(val, (unsigned int __user *)datap); 
-		break; 
-
-	case PTRACE_POKEDATA:
-	case PTRACE_POKETEXT:
-		ret = 0;
-		if (access_process_vm(child, addr, &data, sizeof(u32), 1)!=sizeof(u32))
-			ret = -EIO; 
-		break;
-
-	case PTRACE_PEEKUSR:
-		ret = getreg32(child, addr, &val);
-		if (ret == 0)
-			ret = put_user(val, (__u32 __user *)datap);
-		break;
-
-	case PTRACE_POKEUSR:
-		ret = putreg32(child, addr, data);
-		break;
-
-	case PTRACE_GETREGS: { /* Get all gp regs from the child. */
-		int i;
-	  	if (!access_ok(VERIFY_WRITE, datap, 16*4)) {
-			ret = -EIO;
-			break;
-		}
-		ret = 0;
-		for ( i = 0; i <= 16*4 ; i += sizeof(__u32) ) {
-			getreg32(child, i, &val);
-			ret |= __put_user(val,(u32 __user *)datap);
-			datap += sizeof(u32);
-		}
-		break;
-	}
-
-	case PTRACE_SETREGS: { /* Set all gp regs in the child. */
-		unsigned long tmp;
-		int i;
-	  	if (!access_ok(VERIFY_READ, datap, 16*4)) {
-			ret = -EIO;
-			break;
-		}
-		ret = 0; 
-		for ( i = 0; i <= 16*4; i += sizeof(u32) ) {
-			ret |= __get_user(tmp, (u32 __user *)datap);
-			putreg32(child, i, tmp);
-			datap += sizeof(u32);
-		}
-		break;
-	}
-
-	case PTRACE_GETFPREGS:
-		ret = -EIO; 
-		if (!access_ok(VERIFY_READ, compat_ptr(data), 
-			       sizeof(struct user_i387_struct)))
-			break;
-		save_i387_ia32(child, datap, childregs, 1);
-		ret = 0; 
-			break;
-
-	case PTRACE_SETFPREGS:
-		ret = -EIO;
-		if (!access_ok(VERIFY_WRITE, datap, 
-			       sizeof(struct user_i387_struct)))
-			break;
-		ret = 0;
-		/* don't check EFAULT to be bug-to-bug compatible to i386 */
-		restore_i387_ia32(child, datap, 1);
-		break;
-
-	case PTRACE_GETFPXREGS: { 
-		struct user32_fxsr_struct __user *u = datap;
-		init_fpu(child); 
-		ret = -EIO;
-		if (!access_ok(VERIFY_WRITE, u, sizeof(*u)))
-			break;
-			ret = -EFAULT;
-		if (__copy_to_user(u, &child->thread.i387.fxsave, sizeof(*u)))
-			break;
-		ret = __put_user(childregs->cs, &u->fcs);
-		ret |= __put_user(child->thread.ds, &u->fos); 
-		break; 
-	} 
-	case PTRACE_SETFPXREGS: { 
-		struct user32_fxsr_struct __user *u = datap;
-		unlazy_fpu(child);
-		ret = -EIO;
-		if (!access_ok(VERIFY_READ, u, sizeof(*u)))
-			break;
-		/* no checking to be bug-to-bug compatible with i386. */
-		/* but silence warning */
-		if (__copy_from_user(&child->thread.i387.fxsave, u, sizeof(*u)))
-			;
-		set_stopped_child_used_math(child);
-		child->thread.i387.fxsave.mxcsr &= mxcsr_feature_mask;
-		ret = 0; 
-		break;
-	}
-
-	case PTRACE_GETEVENTMSG:
-		ret = put_user(child->ptrace_message,(unsigned int __user *)compat_ptr(data));
-		break;
-
-	default:
-		BUG();
-	}
-
- out:
-	put_task_struct(child);
-	return ret;
-}
-

arch/x86/ia32/sys_ia32.c

@@ -1,29 +1,29 @@
 /*
  * sys_ia32.c: Conversion between 32bit and 64bit native syscalls. Based on
- *             sys_sparc32 
+ *             sys_sparc32
  *
  * Copyright (C) 2000		VA Linux Co
  * Copyright (C) 2000		Don Dugger <n0ano@valinux.com>
- * Copyright (C) 1999 		Arun Sharma <arun.sharma@intel.com>
- * Copyright (C) 1997,1998 	Jakub Jelinek (jj@sunsite.mff.cuni.cz)
- * Copyright (C) 1997 		David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 1999		Arun Sharma <arun.sharma@intel.com>
+ * Copyright (C) 1997,1998	Jakub Jelinek (jj@sunsite.mff.cuni.cz)
+ * Copyright (C) 1997		David S. Miller (davem@caip.rutgers.edu)
  * Copyright (C) 2000		Hewlett-Packard Co.
  * Copyright (C) 2000		David Mosberger-Tang <davidm@hpl.hp.com>
- * Copyright (C) 2000,2001,2002	Andi Kleen, SuSE Labs (x86-64 port) 
+ * Copyright (C) 2000,2001,2002	Andi Kleen, SuSE Labs (x86-64 port)
  *
  * These routines maintain argument size conversion between 32bit and 64bit
- * environment. In 2.5 most of this should be moved to a generic directory. 
+ * environment. In 2.5 most of this should be moved to a generic directory.
  *
  * This file assumes that there is a hole at the end of user address space.
- * 
- * Some of the functions are LE specific currently. These are hopefully all marked.
- * This should be fixed.
+ *
+ * Some of the functions are LE specific currently. These are
+ * hopefully all marked.  This should be fixed.
  */
 
 #include <linux/kernel.h>
 #include <linux/sched.h>
-#include <linux/fs.h> 
-#include <linux/file.h> 
+#include <linux/fs.h>
+#include <linux/file.h>
 #include <linux/signal.h>
 #include <linux/syscalls.h>
 #include <linux/resource.h>
@@ -90,43 +90,44 @@ int cp_compat_stat(struct kstat *kbuf, struct compat_stat __user *ubuf)
 	if (sizeof(ino) < sizeof(kbuf->ino) && ino != kbuf->ino)
 		return -EOVERFLOW;
 	if (!access_ok(VERIFY_WRITE, ubuf, sizeof(struct compat_stat)) ||
-	    __put_user (old_encode_dev(kbuf->dev), &ubuf->st_dev) ||
-	    __put_user (ino, &ubuf->st_ino) ||
-	    __put_user (kbuf->mode, &ubuf->st_mode) ||
-	    __put_user (kbuf->nlink, &ubuf->st_nlink) ||
-	    __put_user (uid, &ubuf->st_uid) ||
-	    __put_user (gid, &ubuf->st_gid) ||
-	    __put_user (old_encode_dev(kbuf->rdev), &ubuf->st_rdev) ||
-	    __put_user (kbuf->size, &ubuf->st_size) ||
-	    __put_user (kbuf->atime.tv_sec, &ubuf->st_atime) ||
-	    __put_user (kbuf->atime.tv_nsec, &ubuf->st_atime_nsec) ||
-	    __put_user (kbuf->mtime.tv_sec, &ubuf->st_mtime) ||
-	    __put_user (kbuf->mtime.tv_nsec, &ubuf->st_mtime_nsec) ||
-	    __put_user (kbuf->ctime.tv_sec, &ubuf->st_ctime) ||
-	    __put_user (kbuf->ctime.tv_nsec, &ubuf->st_ctime_nsec) ||
-	    __put_user (kbuf->blksize, &ubuf->st_blksize) ||
-	    __put_user (kbuf->blocks, &ubuf->st_blocks))
+	    __put_user(old_encode_dev(kbuf->dev), &ubuf->st_dev) ||
+	    __put_user(ino, &ubuf->st_ino) ||
+	    __put_user(kbuf->mode, &ubuf->st_mode) ||
+	    __put_user(kbuf->nlink, &ubuf->st_nlink) ||
+	    __put_user(uid, &ubuf->st_uid) ||
+	    __put_user(gid, &ubuf->st_gid) ||
+	    __put_user(old_encode_dev(kbuf->rdev), &ubuf->st_rdev) ||
+	    __put_user(kbuf->size, &ubuf->st_size) ||
+	    __put_user(kbuf->atime.tv_sec, &ubuf->st_atime) ||
+	    __put_user(kbuf->atime.tv_nsec, &ubuf->st_atime_nsec) ||
+	    __put_user(kbuf->mtime.tv_sec, &ubuf->st_mtime) ||
+	    __put_user(kbuf->mtime.tv_nsec, &ubuf->st_mtime_nsec) ||
+	    __put_user(kbuf->ctime.tv_sec, &ubuf->st_ctime) ||
+	    __put_user(kbuf->ctime.tv_nsec, &ubuf->st_ctime_nsec) ||
+	    __put_user(kbuf->blksize, &ubuf->st_blksize) ||
+	    __put_user(kbuf->blocks, &ubuf->st_blocks))
 		return -EFAULT;
 	return 0;
 }
 
-asmlinkage long
-sys32_truncate64(char __user * filename, unsigned long offset_low, unsigned long offset_high)
+asmlinkage long sys32_truncate64(char __user *filename,
+				 unsigned long offset_low,
+				 unsigned long offset_high)
 {
        return sys_truncate(filename, ((loff_t) offset_high << 32) | offset_low);
 }
 
-asmlinkage long
-sys32_ftruncate64(unsigned int fd, unsigned long offset_low, unsigned long offset_high)
+asmlinkage long sys32_ftruncate64(unsigned int fd, unsigned long offset_low,
+				  unsigned long offset_high)
 {
        return sys_ftruncate(fd, ((loff_t) offset_high << 32) | offset_low);
 }
 
-/* Another set for IA32/LFS -- x86_64 struct stat is different due to 
-   support for 64bit inode numbers. */
-
-static int
-cp_stat64(struct stat64 __user *ubuf, struct kstat *stat)
+/*
+ * Another set for IA32/LFS -- x86_64 struct stat is different due to
+ * support for 64bit inode numbers.
+ */
+static int cp_stat64(struct stat64 __user *ubuf, struct kstat *stat)
 {
 	typeof(ubuf->st_uid) uid = 0;
 	typeof(ubuf->st_gid) gid = 0;
@@ -134,38 +135,39 @@ cp_stat64(struct stat64 __user *ubuf, struct kstat *stat)
 	SET_GID(gid, stat->gid);
 	if (!access_ok(VERIFY_WRITE, ubuf, sizeof(struct stat64)) ||
 	    __put_user(huge_encode_dev(stat->dev), &ubuf->st_dev) ||
-	    __put_user (stat->ino, &ubuf->__st_ino) ||
-	    __put_user (stat->ino, &ubuf->st_ino) ||
-	    __put_user (stat->mode, &ubuf->st_mode) ||
-	    __put_user (stat->nlink, &ubuf->st_nlink) ||
-	    __put_user (uid, &ubuf->st_uid) ||
-	    __put_user (gid, &ubuf->st_gid) ||
-	    __put_user (huge_encode_dev(stat->rdev), &ubuf->st_rdev) ||
-	    __put_user (stat->size, &ubuf->st_size) ||
-	    __put_user (stat->atime.tv_sec, &ubuf->st_atime) ||
-	    __put_user (stat->atime.tv_nsec, &ubuf->st_atime_nsec) ||
-	    __put_user (stat->mtime.tv_sec, &ubuf->st_mtime) ||
-	    __put_user (stat->mtime.tv_nsec, &ubuf->st_mtime_nsec) ||
-	    __put_user (stat->ctime.tv_sec, &ubuf->st_ctime) ||
-	    __put_user (stat->ctime.tv_nsec, &ubuf->st_ctime_nsec) ||
-	    __put_user (stat->blksize, &ubuf->st_blksize) ||
-	    __put_user (stat->blocks, &ubuf->st_blocks))
+	    __put_user(stat->ino, &ubuf->__st_ino) ||
+	    __put_user(stat->ino, &ubuf->st_ino) ||
+	    __put_user(stat->mode, &ubuf->st_mode) ||
+	    __put_user(stat->nlink, &ubuf->st_nlink) ||
+	    __put_user(uid, &ubuf->st_uid) ||
+	    __put_user(gid, &ubuf->st_gid) ||
+	    __put_user(huge_encode_dev(stat->rdev), &ubuf->st_rdev) ||
+	    __put_user(stat->size, &ubuf->st_size) ||
+	    __put_user(stat->atime.tv_sec, &ubuf->st_atime) ||
+	    __put_user(stat->atime.tv_nsec, &ubuf->st_atime_nsec) ||
+	    __put_user(stat->mtime.tv_sec, &ubuf->st_mtime) ||
+	    __put_user(stat->mtime.tv_nsec, &ubuf->st_mtime_nsec) ||
+	    __put_user(stat->ctime.tv_sec, &ubuf->st_ctime) ||
+	    __put_user(stat->ctime.tv_nsec, &ubuf->st_ctime_nsec) ||
+	    __put_user(stat->blksize, &ubuf->st_blksize) ||
+	    __put_user(stat->blocks, &ubuf->st_blocks))
 		return -EFAULT;
 	return 0;
 }
 
-asmlinkage long
-sys32_stat64(char __user * filename, struct stat64 __user *statbuf)
+asmlinkage long sys32_stat64(char __user *filename,
+			     struct stat64 __user *statbuf)
 {
 	struct kstat stat;
 	int ret = vfs_stat(filename, &stat);
+
 	if (!ret)
 		ret = cp_stat64(statbuf, &stat);
 	return ret;
 }
 
-asmlinkage long
-sys32_lstat64(char __user * filename, struct stat64 __user *statbuf)
+asmlinkage long sys32_lstat64(char __user *filename,
+			      struct stat64 __user *statbuf)
 {
 	struct kstat stat;
 	int ret = vfs_lstat(filename, &stat);
@@ -174,8 +176,7 @@ sys32_lstat64(char __user * filename, struct stat64 __user *statbuf)
 	return ret;
 }
 
-asmlinkage long
-sys32_fstat64(unsigned int fd, struct stat64 __user *statbuf)
+asmlinkage long sys32_fstat64(unsigned int fd, struct stat64 __user *statbuf)
 {
 	struct kstat stat;
 	int ret = vfs_fstat(fd, &stat);
@@ -184,9 +185,8 @@ sys32_fstat64(unsigned int fd, struct stat64 __user *statbuf)
 	return ret;
 }
 
-asmlinkage long
-sys32_fstatat(unsigned int dfd, char __user *filename,
-	      struct stat64 __user* statbuf, int flag)
+asmlinkage long sys32_fstatat(unsigned int dfd, char __user *filename,
+			      struct stat64 __user *statbuf, int flag)
 {
 	struct kstat stat;
 	int error = -EINVAL;
@@ -221,8 +221,7 @@ struct mmap_arg_struct {
 	unsigned int offset;
 };
 
-asmlinkage long
-sys32_mmap(struct mmap_arg_struct __user *arg)
+asmlinkage long sys32_mmap(struct mmap_arg_struct __user *arg)
 {
 	struct mmap_arg_struct a;
 	struct file *file = NULL;
@@ -233,33 +232,33 @@ sys32_mmap(struct mmap_arg_struct __user *arg)
 		return -EFAULT;
 
 	if (a.offset & ~PAGE_MASK)
-		return -EINVAL; 
+		return -EINVAL;
 
 	if (!(a.flags & MAP_ANONYMOUS)) {
 		file = fget(a.fd);
 		if (!file)
 			return -EBADF;
 	}
-	
-	mm = current->mm; 
-	down_write(&mm->mmap_sem); 
-	retval = do_mmap_pgoff(file, a.addr, a.len, a.prot, a.flags, a.offset>>PAGE_SHIFT);
+
+	mm = current->mm;
+	down_write(&mm->mmap_sem);
+	retval = do_mmap_pgoff(file, a.addr, a.len, a.prot, a.flags,
+			       a.offset>>PAGE_SHIFT);
 	if (file)
 		fput(file);
 
-	up_write(&mm->mmap_sem); 
+	up_write(&mm->mmap_sem);
 
 	return retval;
 }
 
-asmlinkage long 
-sys32_mprotect(unsigned long start, size_t len, unsigned long prot)
+asmlinkage long sys32_mprotect(unsigned long start, size_t len,
+			       unsigned long prot)
 {
-	return sys_mprotect(start,len,prot); 
+	return sys_mprotect(start, len, prot);
 }
 
-asmlinkage long
-sys32_pipe(int __user *fd)
+asmlinkage long sys32_pipe(int __user *fd)
 {
 	int retval;
 	int fds[2];
@@ -269,13 +268,13 @@ sys32_pipe(int __user *fd)
 		goto out;
 	if (copy_to_user(fd, fds, sizeof(fds)))
 		retval = -EFAULT;
-  out:
+out:
 	return retval;
 }
 
-asmlinkage long
-sys32_rt_sigaction(int sig, struct sigaction32 __user *act,
-		   struct sigaction32 __user *oact,  unsigned int sigsetsize)
+asmlinkage long sys32_rt_sigaction(int sig, struct sigaction32 __user *act,
+				   struct sigaction32 __user *oact,
+				   unsigned int sigsetsize)
 {
 	struct k_sigaction new_ka, old_ka;
 	int ret;
@@ -291,12 +290,17 @@ sys32_rt_sigaction(int sig, struct sigaction32 __user *act,
 		if (!access_ok(VERIFY_READ, act, sizeof(*act)) ||
 		    __get_user(handler, &act->sa_handler) ||
 		    __get_user(new_ka.sa.sa_flags, &act->sa_flags) ||
-		    __get_user(restorer, &act->sa_restorer)||
-		    __copy_from_user(&set32, &act->sa_mask, sizeof(compat_sigset_t)))
+		    __get_user(restorer, &act->sa_restorer) ||
+		    __copy_from_user(&set32, &act->sa_mask,
+				     sizeof(compat_sigset_t)))
 			return -EFAULT;
 		new_ka.sa.sa_handler = compat_ptr(handler);
 		new_ka.sa.sa_restorer = compat_ptr(restorer);
-		/* FIXME: here we rely on _COMPAT_NSIG_WORS to be >= than _NSIG_WORDS << 1 */
+
+		/*
+		 * FIXME: here we rely on _COMPAT_NSIG_WORS to be >=
+		 * than _NSIG_WORDS << 1
+		 */
 		switch (_NSIG_WORDS) {
 		case 4: new_ka.sa.sa_mask.sig[3] = set32.sig[6]
 				| (((long)set32.sig[7]) << 32);
@@ -312,7 +316,10 @@ sys32_rt_sigaction(int sig, struct sigaction32 __user *act,
 	ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL);
 
 	if (!ret && oact) {
-		/* FIXME: here we rely on _COMPAT_NSIG_WORS to be >= than _NSIG_WORDS << 1 */
+		/*
+		 * FIXME: here we rely on _COMPAT_NSIG_WORS to be >=
+		 * than _NSIG_WORDS << 1
+		 */
 		switch (_NSIG_WORDS) {
 		case 4:
 			set32.sig[7] = (old_ka.sa.sa_mask.sig[3] >> 32);
@@ -328,23 +335,26 @@ sys32_rt_sigaction(int sig, struct sigaction32 __user *act,
 			set32.sig[0] = old_ka.sa.sa_mask.sig[0];
 		}
 		if (!access_ok(VERIFY_WRITE, oact, sizeof(*oact)) ||
-		    __put_user(ptr_to_compat(old_ka.sa.sa_handler), &oact->sa_handler) ||
-		    __put_user(ptr_to_compat(old_ka.sa.sa_restorer), &oact->sa_restorer) ||
+		    __put_user(ptr_to_compat(old_ka.sa.sa_handler),
+			       &oact->sa_handler) ||
+		    __put_user(ptr_to_compat(old_ka.sa.sa_restorer),
+			       &oact->sa_restorer) ||
 		    __put_user(old_ka.sa.sa_flags, &oact->sa_flags) ||
-		    __copy_to_user(&oact->sa_mask, &set32, sizeof(compat_sigset_t)))
+		    __copy_to_user(&oact->sa_mask, &set32,
+				   sizeof(compat_sigset_t)))
 			return -EFAULT;
 	}
 
 	return ret;
 }
 
-asmlinkage long
-sys32_sigaction (int sig, struct old_sigaction32 __user *act, struct old_sigaction32 __user *oact)
+asmlinkage long sys32_sigaction(int sig, struct old_sigaction32 __user *act,
+				struct old_sigaction32 __user *oact)
 {
-        struct k_sigaction new_ka, old_ka;
-        int ret;
+	struct k_sigaction new_ka, old_ka;
+	int ret;
 
-        if (act) {
+	if (act) {
 		compat_old_sigset_t mask;
 		compat_uptr_t handler, restorer;
 
@@ -359,33 +369,35 @@ sys32_sigaction (int sig, struct old_sigaction32 __user *act, struct old_sigacti
 		new_ka.sa.sa_restorer = compat_ptr(restorer);
 
 		siginitset(&new_ka.sa.sa_mask, mask);
-        }
+	}
 
-        ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL);
+	ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL);
 
 	if (!ret && oact) {
 		if (!access_ok(VERIFY_WRITE, oact, sizeof(*oact)) ||
-		    __put_user(ptr_to_compat(old_ka.sa.sa_handler), &oact->sa_handler) ||
-		    __put_user(ptr_to_compat(old_ka.sa.sa_restorer), &oact->sa_restorer) ||
+		    __put_user(ptr_to_compat(old_ka.sa.sa_handler),
+			       &oact->sa_handler) ||
+		    __put_user(ptr_to_compat(old_ka.sa.sa_restorer),
+			       &oact->sa_restorer) ||
 		    __put_user(old_ka.sa.sa_flags, &oact->sa_flags) ||
 		    __put_user(old_ka.sa.sa_mask.sig[0], &oact->sa_mask))
 			return -EFAULT;
-        }
+	}
 
 	return ret;
 }
 
-asmlinkage long
-sys32_rt_sigprocmask(int how, compat_sigset_t __user *set,
-			compat_sigset_t __user *oset, unsigned int sigsetsize)
+asmlinkage long sys32_rt_sigprocmask(int how, compat_sigset_t __user *set,
+				     compat_sigset_t __user *oset,
+				     unsigned int sigsetsize)
 {
 	sigset_t s;
 	compat_sigset_t s32;
 	int ret;
 	mm_segment_t old_fs = get_fs();
-	
+
 	if (set) {
-		if (copy_from_user (&s32, set, sizeof(compat_sigset_t)))
+		if (copy_from_user(&s32, set, sizeof(compat_sigset_t)))
 			return -EFAULT;
 		switch (_NSIG_WORDS) {
 		case 4: s.sig[3] = s32.sig[6] | (((long)s32.sig[7]) << 32);
@@ -394,13 +406,14 @@ sys32_rt_sigprocmask(int how, compat_sigset_t __user *set,
 		case 1: s.sig[0] = s32.sig[0] | (((long)s32.sig[1]) << 32);
 		}
 	}
-	set_fs (KERNEL_DS);
+	set_fs(KERNEL_DS);
 	ret = sys_rt_sigprocmask(how,
 				 set ? (sigset_t __user *)&s : NULL,
 				 oset ? (sigset_t __user *)&s : NULL,
-				 sigsetsize); 
-	set_fs (old_fs);
-	if (ret) return ret;
+				 sigsetsize);
+	set_fs(old_fs);
+	if (ret)
+		return ret;
 	if (oset) {
 		switch (_NSIG_WORDS) {
 		case 4: s32.sig[7] = (s.sig[3] >> 32); s32.sig[6] = s.sig[3];
@@ -408,52 +421,49 @@ sys32_rt_sigprocmask(int how, compat_sigset_t __user *set,
 		case 2: s32.sig[3] = (s.sig[1] >> 32); s32.sig[2] = s.sig[1];
 		case 1: s32.sig[1] = (s.sig[0] >> 32); s32.sig[0] = s.sig[0];
 		}
-		if (copy_to_user (oset, &s32, sizeof(compat_sigset_t)))
+		if (copy_to_user(oset, &s32, sizeof(compat_sigset_t)))
 			return -EFAULT;
 	}
 	return 0;
 }
 
-static inline long
-get_tv32(struct timeval *o, struct compat_timeval __user *i)
+static inline long get_tv32(struct timeval *o, struct compat_timeval __user *i)
 {
-	int err = -EFAULT; 
-	if (access_ok(VERIFY_READ, i, sizeof(*i))) { 
+	int err = -EFAULT;
+
+	if (access_ok(VERIFY_READ, i, sizeof(*i))) {
 		err = __get_user(o->tv_sec, &i->tv_sec);
 		err |= __get_user(o->tv_usec, &i->tv_usec);
 	}
-	return err; 
+	return err;
 }
 
-static inline long
-put_tv32(struct compat_timeval __user *o, struct timeval *i)
+static inline long put_tv32(struct compat_timeval __user *o, struct timeval *i)
 {
 	int err = -EFAULT;
-	if (access_ok(VERIFY_WRITE, o, sizeof(*o))) { 
+
+	if (access_ok(VERIFY_WRITE, o, sizeof(*o))) {
 		err = __put_user(i->tv_sec, &o->tv_sec);
 		err |= __put_user(i->tv_usec, &o->tv_usec);
-	} 
-	return err; 
+	}
+	return err;
 }
 
-extern unsigned int alarm_setitimer(unsigned int seconds);
-
-asmlinkage long
-sys32_alarm(unsigned int seconds)
+asmlinkage long sys32_alarm(unsigned int seconds)
 {
 	return alarm_setitimer(seconds);
 }
 
-/* Translations due to time_t size differences.  Which affects all
-   sorts of things, like timeval and itimerval.  */
-
-extern struct timezone sys_tz;
-
-asmlinkage long
-sys32_gettimeofday(struct compat_timeval __user *tv, struct timezone __user *tz)
+/*
+ * Translations due to time_t size differences. Which affects all
+ * sorts of things, like timeval and itimerval.
+ */
+asmlinkage long sys32_gettimeofday(struct compat_timeval __user *tv,
+				   struct timezone __user *tz)
 {
 	if (tv) {
 		struct timeval ktv;
+
 		do_gettimeofday(&ktv);
 		if (put_tv32(tv, &ktv))
 			return -EFAULT;
@@ -465,14 +475,14 @@ sys32_gettimeofday(struct compat_timeval __user *tv, struct timezone __user *tz)
 	return 0;
 }
 
-asmlinkage long
-sys32_settimeofday(struct compat_timeval __user *tv, struct timezone __user *tz)
+asmlinkage long sys32_settimeofday(struct compat_timeval __user *tv,
+				   struct timezone __user *tz)
 {
 	struct timeval ktv;
 	struct timespec kts;
 	struct timezone ktz;
 
- 	if (tv) {
+	if (tv) {
 		if (get_tv32(&ktv, tv))
 			return -EFAULT;
 		kts.tv_sec = ktv.tv_sec;
@@ -494,8 +504,7 @@ struct sel_arg_struct {
 	unsigned int tvp;
 };
 
-asmlinkage long
-sys32_old_select(struct sel_arg_struct __user *arg)
+asmlinkage long sys32_old_select(struct sel_arg_struct __user *arg)
 {
 	struct sel_arg_struct a;
 
@@ -505,50 +514,45 @@ sys32_old_select(struct sel_arg_struct __user *arg)
 				 compat_ptr(a.exp), compat_ptr(a.tvp));
 }
 
-extern asmlinkage long
-compat_sys_wait4(compat_pid_t pid, compat_uint_t * stat_addr, int options,
-		 struct compat_rusage *ru);
-
-asmlinkage long
-sys32_waitpid(compat_pid_t pid, unsigned int *stat_addr, int options)
+asmlinkage long sys32_waitpid(compat_pid_t pid, unsigned int *stat_addr,
+			      int options)
 {
 	return compat_sys_wait4(pid, stat_addr, options, NULL);
 }
 
 /* 32-bit timeval and related flotsam.  */
 
-asmlinkage long
-sys32_sysfs(int option, u32 arg1, u32 arg2)
+asmlinkage long sys32_sysfs(int option, u32 arg1, u32 arg2)
 {
 	return sys_sysfs(option, arg1, arg2);
 }
 
-asmlinkage long
-sys32_sched_rr_get_interval(compat_pid_t pid, struct compat_timespec __user *interval)
+asmlinkage long sys32_sched_rr_get_interval(compat_pid_t pid,
+				    struct compat_timespec __user *interval)
 {
 	struct timespec t;
 	int ret;
-	mm_segment_t old_fs = get_fs ();
-	
-	set_fs (KERNEL_DS);
+	mm_segment_t old_fs = get_fs();
+
+	set_fs(KERNEL_DS);
 	ret = sys_sched_rr_get_interval(pid, (struct timespec __user *)&t);
-	set_fs (old_fs);
+	set_fs(old_fs);
 	if (put_compat_timespec(&t, interval))
 		return -EFAULT;
 	return ret;
 }
 
-asmlinkage long
-sys32_rt_sigpending(compat_sigset_t __user *set, compat_size_t sigsetsize)
+asmlinkage long sys32_rt_sigpending(compat_sigset_t __user *set,
+				    compat_size_t sigsetsize)
 {
 	sigset_t s;
 	compat_sigset_t s32;
 	int ret;
 	mm_segment_t old_fs = get_fs();
-		
-	set_fs (KERNEL_DS);
+
+	set_fs(KERNEL_DS);
 	ret = sys_rt_sigpending((sigset_t __user *)&s, sigsetsize);
-	set_fs (old_fs);
+	set_fs(old_fs);
 	if (!ret) {
 		switch (_NSIG_WORDS) {
 		case 4: s32.sig[7] = (s.sig[3] >> 32); s32.sig[6] = s.sig[3];
@@ -556,30 +560,29 @@ sys32_rt_sigpending(compat_sigset_t __user *set, compat_size_t sigsetsize)
 		case 2: s32.sig[3] = (s.sig[1] >> 32); s32.sig[2] = s.sig[1];
 		case 1: s32.sig[1] = (s.sig[0] >> 32); s32.sig[0] = s.sig[0];
 		}
-		if (copy_to_user (set, &s32, sizeof(compat_sigset_t)))
+		if (copy_to_user(set, &s32, sizeof(compat_sigset_t)))
 			return -EFAULT;
 	}
 	return ret;
 }
 
-asmlinkage long
-sys32_rt_sigqueueinfo(int pid, int sig, compat_siginfo_t __user *uinfo)
+asmlinkage long sys32_rt_sigqueueinfo(int pid, int sig,
+				      compat_siginfo_t __user *uinfo)
 {
 	siginfo_t info;
 	int ret;
 	mm_segment_t old_fs = get_fs();
-	
+
 	if (copy_siginfo_from_user32(&info, uinfo))
 		return -EFAULT;
-	set_fs (KERNEL_DS);
+	set_fs(KERNEL_DS);
 	ret = sys_rt_sigqueueinfo(pid, sig, (siginfo_t __user *)&info);
-	set_fs (old_fs);
+	set_fs(old_fs);
 	return ret;
 }
 
 /* These are here just in case some old ia32 binary calls it. */
-asmlinkage long
-sys32_pause(void)
+asmlinkage long sys32_pause(void)
 {
 	current->state = TASK_INTERRUPTIBLE;
 	schedule();
@@ -599,25 +602,25 @@ struct sysctl_ia32 {
 };
 
 
-asmlinkage long
-sys32_sysctl(struct sysctl_ia32 __user *args32)
+asmlinkage long sys32_sysctl(struct sysctl_ia32 __user *args32)
 {
 	struct sysctl_ia32 a32;
-	mm_segment_t old_fs = get_fs ();
+	mm_segment_t old_fs = get_fs();
 	void __user *oldvalp, *newvalp;
 	size_t oldlen;
 	int __user *namep;
 	long ret;
 
-	if (copy_from_user(&a32, args32, sizeof (a32)))
+	if (copy_from_user(&a32, args32, sizeof(a32)))
 		return -EFAULT;
 
 	/*
-	 * We need to pre-validate these because we have to disable address checking
-	 * before calling do_sysctl() because of OLDLEN but we can't run the risk of the
-	 * user specifying bad addresses here.  Well, since we're dealing with 32 bit
-	 * addresses, we KNOW that access_ok() will always succeed, so this is an
-	 * expensive NOP, but so what...
+	 * We need to pre-validate these because we have to disable
+	 * address checking before calling do_sysctl() because of
+	 * OLDLEN but we can't run the risk of the user specifying bad
+	 * addresses here.  Well, since we're dealing with 32 bit
+	 * addresses, we KNOW that access_ok() will always succeed, so
+	 * this is an expensive NOP, but so what...
 	 */
 	namep = compat_ptr(a32.name);
 	oldvalp = compat_ptr(a32.oldval);
@@ -636,34 +639,34 @@ sys32_sysctl(struct sysctl_ia32 __user *args32)
 	unlock_kernel();
 	set_fs(old_fs);
 
-	if (oldvalp && put_user (oldlen, (int __user *)compat_ptr(a32.oldlenp)))
+	if (oldvalp && put_user(oldlen, (int __user *)compat_ptr(a32.oldlenp)))
 		return -EFAULT;
 
 	return ret;
 }
 #endif
 
-/* warning: next two assume little endian */ 
-asmlinkage long
-sys32_pread(unsigned int fd, char __user *ubuf, u32 count, u32 poslo, u32 poshi)
+/* warning: next two assume little endian */
+asmlinkage long sys32_pread(unsigned int fd, char __user *ubuf, u32 count,
+			    u32 poslo, u32 poshi)
 {
 	return sys_pread64(fd, ubuf, count,
 			 ((loff_t)AA(poshi) << 32) | AA(poslo));
 }
 
-asmlinkage long
-sys32_pwrite(unsigned int fd, char __user *ubuf, u32 count, u32 poslo, u32 poshi)
+asmlinkage long sys32_pwrite(unsigned int fd, char __user *ubuf, u32 count,
+			     u32 poslo, u32 poshi)
 {
 	return sys_pwrite64(fd, ubuf, count,
 			  ((loff_t)AA(poshi) << 32) | AA(poslo));
 }
 
 
-asmlinkage long
-sys32_personality(unsigned long personality)
+asmlinkage long sys32_personality(unsigned long personality)
 {
 	int ret;
-	if (personality(current->personality) == PER_LINUX32 && 
+
+	if (personality(current->personality) == PER_LINUX32 &&
 		personality == PER_LINUX)
 		personality = PER_LINUX32;
 	ret = sys_personality(personality);
@@ -672,34 +675,33 @@ sys32_personality(unsigned long personality)
 	return ret;
 }
 
-asmlinkage long
-sys32_sendfile(int out_fd, int in_fd, compat_off_t __user *offset, s32 count)
+asmlinkage long sys32_sendfile(int out_fd, int in_fd,
+			       compat_off_t __user *offset, s32 count)
 {
 	mm_segment_t old_fs = get_fs();
 	int ret;
 	off_t of;
-	
+
 	if (offset && get_user(of, offset))
 		return -EFAULT;
-		
+
 	set_fs(KERNEL_DS);
 	ret = sys_sendfile(out_fd, in_fd, offset ? (off_t __user *)&of : NULL,
 			   count);
 	set_fs(old_fs);
-	
+
 	if (offset && put_user(of, offset))
 		return -EFAULT;
-		
 	return ret;
 }
 
 asmlinkage long sys32_mmap2(unsigned long addr, unsigned long len,
-	unsigned long prot, unsigned long flags,
-	unsigned long fd, unsigned long pgoff)
+			    unsigned long prot, unsigned long flags,
+			    unsigned long fd, unsigned long pgoff)
 {
 	struct mm_struct *mm = current->mm;
 	unsigned long error;
-	struct file * file = NULL;
+	struct file *file = NULL;
 
 	flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
 	if (!(flags & MAP_ANONYMOUS)) {
@@ -717,36 +719,35 @@ asmlinkage long sys32_mmap2(unsigned long addr, unsigned long len,
 	return error;
 }
 
-asmlinkage long sys32_olduname(struct oldold_utsname __user * name)
+asmlinkage long sys32_olduname(struct oldold_utsname __user *name)
 {
+	char *arch = "x86_64";
 	int err;
 
 	if (!name)
 		return -EFAULT;
 	if (!access_ok(VERIFY_WRITE, name, sizeof(struct oldold_utsname)))
 		return -EFAULT;
-  
-  	down_read(&uts_sem);
-
-	err = __copy_to_user(&name->sysname,&utsname()->sysname,
-				__OLD_UTS_LEN);
-	err |= __put_user(0,name->sysname+__OLD_UTS_LEN);
-	err |= __copy_to_user(&name->nodename,&utsname()->nodename,
-				__OLD_UTS_LEN);
-	err |= __put_user(0,name->nodename+__OLD_UTS_LEN);
-	err |= __copy_to_user(&name->release,&utsname()->release,
-				__OLD_UTS_LEN);
-	err |= __put_user(0,name->release+__OLD_UTS_LEN);
-	err |= __copy_to_user(&name->version,&utsname()->version,
-				__OLD_UTS_LEN);
-	err |= __put_user(0,name->version+__OLD_UTS_LEN);
-	{
-		char *arch = "x86_64";
-		if (personality(current->personality) == PER_LINUX32)
-			arch = "i686";
-		 
-		err |= __copy_to_user(&name->machine, arch, strlen(arch)+1);
-	}
+
+	down_read(&uts_sem);
+
+	err = __copy_to_user(&name->sysname, &utsname()->sysname,
+			     __OLD_UTS_LEN);
+	err |= __put_user(0, name->sysname+__OLD_UTS_LEN);
+	err |= __copy_to_user(&name->nodename, &utsname()->nodename,
+			      __OLD_UTS_LEN);
+	err |= __put_user(0, name->nodename+__OLD_UTS_LEN);
+	err |= __copy_to_user(&name->release, &utsname()->release,
+			      __OLD_UTS_LEN);
+	err |= __put_user(0, name->release+__OLD_UTS_LEN);
+	err |= __copy_to_user(&name->version, &utsname()->version,
+			      __OLD_UTS_LEN);
+	err |= __put_user(0, name->version+__OLD_UTS_LEN);
+
+	if (personality(current->personality) == PER_LINUX32)
+		arch = "i686";
+
+	err |= __copy_to_user(&name->machine, arch, strlen(arch) + 1);
 
 	up_read(&uts_sem);
 
@@ -755,17 +756,19 @@ asmlinkage long sys32_olduname(struct oldold_utsname __user * name)
 	return err;
 }
 
-long sys32_uname(struct old_utsname __user * name)
+long sys32_uname(struct old_utsname __user *name)
 {
 	int err;
+
 	if (!name)
 		return -EFAULT;
 	down_read(&uts_sem);
-	err = copy_to_user(name, utsname(), sizeof (*name));
+	err = copy_to_user(name, utsname(), sizeof(*name));
 	up_read(&uts_sem);
-	if (personality(current->personality) == PER_LINUX32) 
+	if (personality(current->personality) == PER_LINUX32)
 		err |= copy_to_user(&name->machine, "i686", 5);
-	return err?-EFAULT:0;
+
+	return err ? -EFAULT : 0;
 }
 
 long sys32_ustat(unsigned dev, struct ustat32 __user *u32p)
@@ -773,27 +776,28 @@ long sys32_ustat(unsigned dev, struct ustat32 __user *u32p)
 	struct ustat u;
 	mm_segment_t seg;
 	int ret;
-	
-	seg = get_fs(); 
-	set_fs(KERNEL_DS); 
+
+	seg = get_fs();
+	set_fs(KERNEL_DS);
 	ret = sys_ustat(dev, (struct ustat __user *)&u);
 	set_fs(seg);
-	if (ret >= 0) { 
-		if (!access_ok(VERIFY_WRITE,u32p,sizeof(struct ustat32)) || 
-		    __put_user((__u32) u.f_tfree, &u32p->f_tfree) ||
-		    __put_user((__u32) u.f_tinode, &u32p->f_tfree) ||
-		    __copy_to_user(&u32p->f_fname, u.f_fname, sizeof(u.f_fname)) ||
-		    __copy_to_user(&u32p->f_fpack, u.f_fpack, sizeof(u.f_fpack)))
-			ret = -EFAULT;
-	}
+	if (ret < 0)
+		return ret;
+
+	if (!access_ok(VERIFY_WRITE, u32p, sizeof(struct ustat32)) ||
+	    __put_user((__u32) u.f_tfree, &u32p->f_tfree) ||
+	    __put_user((__u32) u.f_tinode, &u32p->f_tfree) ||
+	    __copy_to_user(&u32p->f_fname, u.f_fname, sizeof(u.f_fname)) ||
+	    __copy_to_user(&u32p->f_fpack, u.f_fpack, sizeof(u.f_fpack)))
+		ret = -EFAULT;
 	return ret;
-} 
+}
 
 asmlinkage long sys32_execve(char __user *name, compat_uptr_t __user *argv,
 			     compat_uptr_t __user *envp, struct pt_regs *regs)
 {
 	long error;
-	char * filename;
+	char *filename;
 
 	filename = getname(name);
 	error = PTR_ERR(filename);
@@ -812,18 +816,19 @@ asmlinkage long sys32_execve(char __user *name, compat_uptr_t __user *argv,
 asmlinkage long sys32_clone(unsigned int clone_flags, unsigned int newsp,
 			    struct pt_regs *regs)
 {
-	void __user *parent_tid = (void __user *)regs->rdx;
-	void __user *child_tid = (void __user *)regs->rdi;
+	void __user *parent_tid = (void __user *)regs->dx;
+	void __user *child_tid = (void __user *)regs->di;
+
 	if (!newsp)
-		newsp = regs->rsp;
-        return do_fork(clone_flags, newsp, regs, 0, parent_tid, child_tid);
+		newsp = regs->sp;
+	return do_fork(clone_flags, newsp, regs, 0, parent_tid, child_tid);
 }
 
 /*
- * Some system calls that need sign extended arguments. This could be done by a generic wrapper.
- */ 
-
-long sys32_lseek (unsigned int fd, int offset, unsigned int whence)
+ * Some system calls that need sign extended arguments. This could be
+ * done by a generic wrapper.
+ */
+long sys32_lseek(unsigned int fd, int offset, unsigned int whence)
 {
 	return sys_lseek(fd, offset, whence);
 }
@@ -832,49 +837,52 @@ long sys32_kill(int pid, int sig)
 {
 	return sys_kill(pid, sig);
 }
- 
-long sys32_fadvise64_64(int fd, __u32 offset_low, __u32 offset_high, 
+
+long sys32_fadvise64_64(int fd, __u32 offset_low, __u32 offset_high,
 			__u32 len_low, __u32 len_high, int advice)
-{ 
+{
 	return sys_fadvise64_64(fd,
 			       (((u64)offset_high)<<32) | offset_low,
 			       (((u64)len_high)<<32) | len_low,
-			       advice); 
-} 
+				advice);
+}
 
 long sys32_vm86_warning(void)
-{ 
+{
 	struct task_struct *me = current;
 	static char lastcomm[sizeof(me->comm)];
+
 	if (strncmp(lastcomm, me->comm, sizeof(lastcomm))) {
-		compat_printk(KERN_INFO "%s: vm86 mode not supported on 64 bit kernel\n",
-		       me->comm);
+		compat_printk(KERN_INFO
+			      "%s: vm86 mode not supported on 64 bit kernel\n",
+			      me->comm);
 		strncpy(lastcomm, me->comm, sizeof(lastcomm));
-	} 
+	}
 	return -ENOSYS;
-} 
+}
 
 long sys32_lookup_dcookie(u32 addr_low, u32 addr_high,
-			  char __user * buf, size_t len)
+			  char __user *buf, size_t len)
 {
 	return sys_lookup_dcookie(((u64)addr_high << 32) | addr_low, buf, len);
 }
 
-asmlinkage ssize_t sys32_readahead(int fd, unsigned off_lo, unsigned off_hi, size_t count)
+asmlinkage ssize_t sys32_readahead(int fd, unsigned off_lo, unsigned off_hi,
+				   size_t count)
 {
 	return sys_readahead(fd, ((u64)off_hi << 32) | off_lo, count);
 }
 
 asmlinkage long sys32_sync_file_range(int fd, unsigned off_low, unsigned off_hi,
-			   unsigned n_low, unsigned n_hi,  int flags)
+				      unsigned n_low, unsigned n_hi,  int flags)
 {
 	return sys_sync_file_range(fd,
 				   ((u64)off_hi << 32) | off_low,
 				   ((u64)n_hi << 32) | n_low, flags);
 }
 
-asmlinkage long sys32_fadvise64(int fd, unsigned offset_lo, unsigned offset_hi, size_t len,
-		     int advice)
+asmlinkage long sys32_fadvise64(int fd, unsigned offset_lo, unsigned offset_hi,
+				size_t len, int advice)
 {
 	return sys_fadvise64_64(fd, ((u64)offset_hi << 32) | offset_lo,
 				len, advice);

arch/x86/ia32/syscall32.c

@@ -1,83 +0,0 @@
-/* Copyright 2002,2003 Andi Kleen, SuSE Labs */
-
-/* vsyscall handling for 32bit processes. Map a stub page into it 
-   on demand because 32bit cannot reach the kernel's fixmaps */
-
-#include <linux/mm.h>
-#include <linux/string.h>
-#include <linux/kernel.h>
-#include <linux/gfp.h>
-#include <linux/init.h>
-#include <linux/stringify.h>
-#include <linux/security.h>
-#include <asm/proto.h>
-#include <asm/tlbflush.h>
-#include <asm/ia32_unistd.h>
-#include <asm/vsyscall32.h>
-
-extern unsigned char syscall32_syscall[], syscall32_syscall_end[];
-extern unsigned char syscall32_sysenter[], syscall32_sysenter_end[];
-extern int sysctl_vsyscall32;
-
-static struct page *syscall32_pages[1];
-static int use_sysenter = -1;
-
-struct linux_binprm;
-
-/* Setup a VMA at program startup for the vsyscall page */
-int syscall32_setup_pages(struct linux_binprm *bprm, int exstack)
-{
-	struct mm_struct *mm = current->mm;
-	int ret;
-
-	down_write(&mm->mmap_sem);
-	/*
-	 * MAYWRITE to allow gdb to COW and set breakpoints
-	 *
-	 * Make sure the vDSO gets into every core dump.
-	 * Dumping its contents makes post-mortem fully interpretable later
-	 * without matching up the same kernel and hardware config to see
-	 * what PC values meant.
-	 */
-	/* Could randomize here */
-	ret = install_special_mapping(mm, VSYSCALL32_BASE, PAGE_SIZE,
-				      VM_READ|VM_EXEC|
-				      VM_MAYREAD|VM_MAYWRITE|VM_MAYEXEC|
-				      VM_ALWAYSDUMP,
-				      syscall32_pages);
-	up_write(&mm->mmap_sem);
-	return ret;
-}
-
-static int __init init_syscall32(void)
-{ 
-	char *syscall32_page = (void *)get_zeroed_page(GFP_KERNEL);
-	if (!syscall32_page) 
-		panic("Cannot allocate syscall32 page"); 
-	syscall32_pages[0] = virt_to_page(syscall32_page);
- 	if (use_sysenter > 0) {
- 		memcpy(syscall32_page, syscall32_sysenter,
- 		       syscall32_sysenter_end - syscall32_sysenter);
- 	} else {
-  		memcpy(syscall32_page, syscall32_syscall,
-  		       syscall32_syscall_end - syscall32_syscall);
-  	}	
-	return 0;
-} 
-	
-__initcall(init_syscall32); 
-
-/* May not be __init: called during resume */
-void syscall32_cpu_init(void)
-{
-	if (use_sysenter < 0)
- 		use_sysenter = (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL);
-
-	/* Load these always in case some future AMD CPU supports
-	   SYSENTER from compat mode too. */
-	checking_wrmsrl(MSR_IA32_SYSENTER_CS, (u64)__KERNEL_CS);
-	checking_wrmsrl(MSR_IA32_SYSENTER_ESP, 0ULL);
-	checking_wrmsrl(MSR_IA32_SYSENTER_EIP, (u64)ia32_sysenter_target);
-
-	wrmsrl(MSR_CSTAR, ia32_cstar_target);
-}

arch/x86/ia32/syscall32_syscall.S

@@ -1,17 +0,0 @@
-/* 32bit VDSOs mapped into user space. */
-
-	.section ".init.data","aw"
-
-	.globl syscall32_syscall
-	.globl syscall32_syscall_end
-
-syscall32_syscall:
-	.incbin "arch/x86/ia32/vsyscall-syscall.so"
-syscall32_syscall_end:
-
-	.globl syscall32_sysenter
-	.globl syscall32_sysenter_end
-
-syscall32_sysenter:
-	.incbin "arch/x86/ia32/vsyscall-sysenter.so"
-syscall32_sysenter_end:

arch/x86/ia32/tls32.c

@@ -1,163 +0,0 @@
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/user.h>
-
-#include <asm/uaccess.h>
-#include <asm/desc.h>
-#include <asm/system.h>
-#include <asm/ldt.h>
-#include <asm/processor.h>
-#include <asm/proto.h>
-
-/*
- * sys_alloc_thread_area: get a yet unused TLS descriptor index.
- */
-static int get_free_idx(void)
-{
-	struct thread_struct *t = &current->thread;
-	int idx;
-
-	for (idx = 0; idx < GDT_ENTRY_TLS_ENTRIES; idx++)
-		if (desc_empty((struct n_desc_struct *)(t->tls_array) + idx))
-			return idx + GDT_ENTRY_TLS_MIN;
-	return -ESRCH;
-}
-
-/*
- * Set a given TLS descriptor:
- * When you want addresses > 32bit use arch_prctl() 
- */
-int do_set_thread_area(struct thread_struct *t, struct user_desc __user *u_info)
-{
-	struct user_desc info;
-	struct n_desc_struct *desc;
-	int cpu, idx;
-
-	if (copy_from_user(&info, u_info, sizeof(info)))
-		return -EFAULT;
-
-	idx = info.entry_number;
-
-	/*
-	 * index -1 means the kernel should try to find and
-	 * allocate an empty descriptor:
-	 */
-	if (idx == -1) {
-		idx = get_free_idx();
-		if (idx < 0)
-			return idx;
-		if (put_user(idx, &u_info->entry_number))
-			return -EFAULT;
-	}
-
-	if (idx < GDT_ENTRY_TLS_MIN || idx > GDT_ENTRY_TLS_MAX)
-		return -EINVAL;
-
-	desc = ((struct n_desc_struct *)t->tls_array) + idx - GDT_ENTRY_TLS_MIN;
-
-	/*
-	 * We must not get preempted while modifying the TLS.
-	 */
-	cpu = get_cpu();
-
-	if (LDT_empty(&info)) {
-		desc->a = 0;
-		desc->b = 0;
-	} else {
-		desc->a = LDT_entry_a(&info);
-		desc->b = LDT_entry_b(&info);
-	}
-	if (t == &current->thread)
-		load_TLS(t, cpu);
-
-	put_cpu();
-	return 0;
-}
-
-asmlinkage long sys32_set_thread_area(struct user_desc __user *u_info)
-{ 
-	return do_set_thread_area(&current->thread, u_info); 
-} 
-
-
-/*
- * Get the current Thread-Local Storage area:
- */
-
-#define GET_BASE(desc) ( \
-	(((desc)->a >> 16) & 0x0000ffff) | \
-	(((desc)->b << 16) & 0x00ff0000) | \
-	( (desc)->b        & 0xff000000)   )
-
-#define GET_LIMIT(desc) ( \
-	((desc)->a & 0x0ffff) | \
-	 ((desc)->b & 0xf0000) )
-	
-#define GET_32BIT(desc)		(((desc)->b >> 22) & 1)
-#define GET_CONTENTS(desc)	(((desc)->b >> 10) & 3)
-#define GET_WRITABLE(desc)	(((desc)->b >>  9) & 1)
-#define GET_LIMIT_PAGES(desc)	(((desc)->b >> 23) & 1)
-#define GET_PRESENT(desc)	(((desc)->b >> 15) & 1)
-#define GET_USEABLE(desc)	(((desc)->b >> 20) & 1)
-#define GET_LONGMODE(desc)	(((desc)->b >> 21) & 1)
-
-int do_get_thread_area(struct thread_struct *t, struct user_desc __user *u_info)
-{
-	struct user_desc info;
-	struct n_desc_struct *desc;
-	int idx;
-
-	if (get_user(idx, &u_info->entry_number))
-		return -EFAULT;
-	if (idx < GDT_ENTRY_TLS_MIN || idx > GDT_ENTRY_TLS_MAX)
-		return -EINVAL;
-
-	desc = ((struct n_desc_struct *)t->tls_array) + idx - GDT_ENTRY_TLS_MIN;
-
-	memset(&info, 0, sizeof(struct user_desc));
-	info.entry_number = idx;
-	info.base_addr = GET_BASE(desc);
-	info.limit = GET_LIMIT(desc);
-	info.seg_32bit = GET_32BIT(desc);
-	info.contents = GET_CONTENTS(desc);
-	info.read_exec_only = !GET_WRITABLE(desc);
-	info.limit_in_pages = GET_LIMIT_PAGES(desc);
-	info.seg_not_present = !GET_PRESENT(desc);
-	info.useable = GET_USEABLE(desc);
-	info.lm = GET_LONGMODE(desc);
-
-	if (copy_to_user(u_info, &info, sizeof(info)))
-		return -EFAULT;
-	return 0;
-}
-
-asmlinkage long sys32_get_thread_area(struct user_desc __user *u_info)
-{
-	return do_get_thread_area(&current->thread, u_info);
-} 
-
-
-int ia32_child_tls(struct task_struct *p, struct pt_regs *childregs)
-{
-	struct n_desc_struct *desc;
-	struct user_desc info;
-	struct user_desc __user *cp;
-	int idx;
-	
-	cp = (void __user *)childregs->rsi;
-	if (copy_from_user(&info, cp, sizeof(info)))
-		return -EFAULT;
-	if (LDT_empty(&info))
-		return -EINVAL;
-	
-	idx = info.entry_number;
-	if (idx < GDT_ENTRY_TLS_MIN || idx > GDT_ENTRY_TLS_MAX)
-		return -EINVAL;
-	
-	desc = (struct n_desc_struct *)(p->thread.tls_array) + idx - GDT_ENTRY_TLS_MIN;
-	desc->a = LDT_entry_a(&info);
-	desc->b = LDT_entry_b(&info);
-
-	return 0;
-}

arch/x86/ia32/vsyscall-sigreturn.S

@@ -1,143 +0,0 @@
-/*
- * Common code for the sigreturn entry points on the vsyscall page.
- * This code uses SYSCALL_ENTER_KERNEL (either syscall or int $0x80)
- * to enter the kernel.
- * This file is #include'd by vsyscall-*.S to define them after the
- * vsyscall entry point.  The addresses we get for these entry points
- * by doing ".balign 32" must match in both versions of the page.
- */
-
-	.code32
-	.section .text.sigreturn,"ax"
-	.balign 32
-	.globl __kernel_sigreturn
-	.type __kernel_sigreturn,@function
-__kernel_sigreturn:
-.LSTART_sigreturn:
-	popl %eax
-	movl $__NR_ia32_sigreturn, %eax
-	SYSCALL_ENTER_KERNEL
-.LEND_sigreturn:
-	.size __kernel_sigreturn,.-.LSTART_sigreturn
-
-	.section .text.rtsigreturn,"ax"
-	.balign 32
-	.globl __kernel_rt_sigreturn
-	.type __kernel_rt_sigreturn,@function
-__kernel_rt_sigreturn:
-.LSTART_rt_sigreturn:
-	movl $__NR_ia32_rt_sigreturn, %eax
-	SYSCALL_ENTER_KERNEL
-.LEND_rt_sigreturn:
-	.size __kernel_rt_sigreturn,.-.LSTART_rt_sigreturn
-
-	.section .eh_frame,"a",@progbits
-.LSTARTFRAMES:
-        .long .LENDCIES-.LSTARTCIES
-.LSTARTCIES:
-	.long 0			/* CIE ID */
-	.byte 1			/* Version number */
-	.string "zRS"		/* NUL-terminated augmentation string */
-	.uleb128 1		/* Code alignment factor */
-	.sleb128 -4		/* Data alignment factor */
-	.byte 8			/* Return address register column */
-	.uleb128 1		/* Augmentation value length */
-	.byte 0x1b		/* DW_EH_PE_pcrel|DW_EH_PE_sdata4. */
-	.byte 0x0c		/* DW_CFA_def_cfa */
-	.uleb128 4
-	.uleb128 4
-	.byte 0x88		/* DW_CFA_offset, column 0x8 */
-	.uleb128 1
-	.align 4
-.LENDCIES:
-
-	.long .LENDFDE2-.LSTARTFDE2	/* Length FDE */
-.LSTARTFDE2:
-	.long .LSTARTFDE2-.LSTARTFRAMES	/* CIE pointer */
-	/* HACK: The dwarf2 unwind routines will subtract 1 from the
-	   return address to get an address in the middle of the
-	   presumed call instruction.  Since we didn't get here via
-	   a call, we need to include the nop before the real start
-	   to make up for it.  */
-	.long .LSTART_sigreturn-1-.	/* PC-relative start address */
-	.long .LEND_sigreturn-.LSTART_sigreturn+1
-	.uleb128 0			/* Augmentation length */
-	/* What follows are the instructions for the table generation.
-	   We record the locations of each register saved.  This is
-	   complicated by the fact that the "CFA" is always assumed to
-	   be the value of the stack pointer in the caller.  This means
-	   that we must define the CFA of this body of code to be the
-	   saved value of the stack pointer in the sigcontext.  Which
-	   also means that there is no fixed relation to the other 
-	   saved registers, which means that we must use DW_CFA_expression
-	   to compute their addresses.  It also means that when we 
-	   adjust the stack with the popl, we have to do it all over again.  */
-
-#define do_cfa_expr(offset)						\
-	.byte 0x0f;			/* DW_CFA_def_cfa_expression */	\
-	.uleb128 1f-0f;			/*   length */			\
-0:	.byte 0x74;			/*     DW_OP_breg4 */		\
-	.sleb128 offset;		/*      offset */		\
-	.byte 0x06;			/*     DW_OP_deref */		\
-1:
-
-#define do_expr(regno, offset)						\
-	.byte 0x10;			/* DW_CFA_expression */		\
-	.uleb128 regno;			/*   regno */			\
-	.uleb128 1f-0f;			/*   length */			\
-0:	.byte 0x74;			/*     DW_OP_breg4 */		\
-	.sleb128 offset;		/*       offset */		\
-1:
-
-	do_cfa_expr(IA32_SIGCONTEXT_esp+4)
-	do_expr(0, IA32_SIGCONTEXT_eax+4)
-	do_expr(1, IA32_SIGCONTEXT_ecx+4)
-	do_expr(2, IA32_SIGCONTEXT_edx+4)
-	do_expr(3, IA32_SIGCONTEXT_ebx+4)
-	do_expr(5, IA32_SIGCONTEXT_ebp+4)
-	do_expr(6, IA32_SIGCONTEXT_esi+4)
-	do_expr(7, IA32_SIGCONTEXT_edi+4)
-	do_expr(8, IA32_SIGCONTEXT_eip+4)
-
-	.byte 0x42	/* DW_CFA_advance_loc 2 -- nop; popl eax. */
-
-	do_cfa_expr(IA32_SIGCONTEXT_esp)
-	do_expr(0, IA32_SIGCONTEXT_eax)
-	do_expr(1, IA32_SIGCONTEXT_ecx)
-	do_expr(2, IA32_SIGCONTEXT_edx)
-	do_expr(3, IA32_SIGCONTEXT_ebx)
-	do_expr(5, IA32_SIGCONTEXT_ebp)
-	do_expr(6, IA32_SIGCONTEXT_esi)
-	do_expr(7, IA32_SIGCONTEXT_edi)
-	do_expr(8, IA32_SIGCONTEXT_eip)
-
-	.align 4
-.LENDFDE2:
-
-	.long .LENDFDE3-.LSTARTFDE3	/* Length FDE */
-.LSTARTFDE3:
-	.long .LSTARTFDE3-.LSTARTFRAMES	/* CIE pointer */
-	/* HACK: See above wrt unwind library assumptions.  */
-	.long .LSTART_rt_sigreturn-1-.	/* PC-relative start address */
-	.long .LEND_rt_sigreturn-.LSTART_rt_sigreturn+1
-	.uleb128 0			/* Augmentation */
-	/* What follows are the instructions for the table generation.
-	   We record the locations of each register saved.  This is
-	   slightly less complicated than the above, since we don't
-	   modify the stack pointer in the process.  */
-
-	do_cfa_expr(IA32_RT_SIGFRAME_sigcontext-4 + IA32_SIGCONTEXT_esp)
-	do_expr(0, IA32_RT_SIGFRAME_sigcontext-4 + IA32_SIGCONTEXT_eax)
-	do_expr(1, IA32_RT_SIGFRAME_sigcontext-4 + IA32_SIGCONTEXT_ecx)
-	do_expr(2, IA32_RT_SIGFRAME_sigcontext-4 + IA32_SIGCONTEXT_edx)
-	do_expr(3, IA32_RT_SIGFRAME_sigcontext-4 + IA32_SIGCONTEXT_ebx)
-	do_expr(5, IA32_RT_SIGFRAME_sigcontext-4 + IA32_SIGCONTEXT_ebp)
-	do_expr(6, IA32_RT_SIGFRAME_sigcontext-4 + IA32_SIGCONTEXT_esi)
-	do_expr(7, IA32_RT_SIGFRAME_sigcontext-4 + IA32_SIGCONTEXT_edi)
-	do_expr(8, IA32_RT_SIGFRAME_sigcontext-4 + IA32_SIGCONTEXT_eip)
-
-	.align 4
-.LENDFDE3:
-
-#include "../../x86/kernel/vsyscall-note_32.S"
-

arch/x86/ia32/vsyscall-sysenter.S

@@ -1,95 +0,0 @@
-/*
- * Code for the vsyscall page.  This version uses the sysenter instruction.
- */
-
-#include <asm/ia32_unistd.h>
-#include <asm/asm-offsets.h>
-
-	.code32
-	.text
-	.section .text.vsyscall,"ax"
-	.globl __kernel_vsyscall
-	.type __kernel_vsyscall,@function
-__kernel_vsyscall:
-.LSTART_vsyscall:
-	push	%ecx
-.Lpush_ecx:
-	push	%edx
-.Lpush_edx:
-	push	%ebp
-.Lenter_kernel:
-	movl	%esp,%ebp
-	sysenter
-	.space 7,0x90
-	jmp	.Lenter_kernel
-	/* 16: System call normal return point is here! */
-	pop	%ebp
-.Lpop_ebp:
-	pop	%edx
-.Lpop_edx:
-	pop	%ecx
-.Lpop_ecx:
-	ret
-.LEND_vsyscall:
-	.size __kernel_vsyscall,.-.LSTART_vsyscall
-
-	.section .eh_frame,"a",@progbits
-.LSTARTFRAME:
-	.long .LENDCIE-.LSTARTCIE
-.LSTARTCIE:
-	.long 0			/* CIE ID */
-	.byte 1			/* Version number */
-	.string "zR"		/* NUL-terminated augmentation string */
-	.uleb128 1		/* Code alignment factor */
-	.sleb128 -4		/* Data alignment factor */
-	.byte 8			/* Return address register column */
-	.uleb128 1		/* Augmentation value length */
-	.byte 0x1b		/* DW_EH_PE_pcrel|DW_EH_PE_sdata4. */
-	.byte 0x0c		/* DW_CFA_def_cfa */
-	.uleb128 4
-	.uleb128 4
-	.byte 0x88		/* DW_CFA_offset, column 0x8 */
-	.uleb128 1
-	.align 4
-.LENDCIE:
-
-	.long .LENDFDE1-.LSTARTFDE1	/* Length FDE */
-.LSTARTFDE1:
-	.long .LSTARTFDE1-.LSTARTFRAME	/* CIE pointer */
-	.long .LSTART_vsyscall-.	/* PC-relative start address */
-	.long .LEND_vsyscall-.LSTART_vsyscall
-	.uleb128 0			/* Augmentation length */
-	/* What follows are the instructions for the table generation.
-	   We have to record all changes of the stack pointer.  */
-	.byte 0x04		/* DW_CFA_advance_loc4 */
-	.long .Lpush_ecx-.LSTART_vsyscall
-	.byte 0x0e		/* DW_CFA_def_cfa_offset */
-	.byte 0x08		/* RA at offset 8 now */
-	.byte 0x04		/* DW_CFA_advance_loc4 */
-	.long .Lpush_edx-.Lpush_ecx
-	.byte 0x0e		/* DW_CFA_def_cfa_offset */
-	.byte 0x0c		/* RA at offset 12 now */
-	.byte 0x04		/* DW_CFA_advance_loc4 */
-	.long .Lenter_kernel-.Lpush_edx
-	.byte 0x0e		/* DW_CFA_def_cfa_offset */
-	.byte 0x10		/* RA at offset 16 now */
-	.byte 0x85, 0x04	/* DW_CFA_offset %ebp -16 */
-	/* Finally the epilogue.  */
-	.byte 0x04		/* DW_CFA_advance_loc4 */
-	.long .Lpop_ebp-.Lenter_kernel
-	.byte 0x0e		/* DW_CFA_def_cfa_offset */
-	.byte 0x12		/* RA at offset 12 now */
-	.byte 0xc5		/* DW_CFA_restore %ebp */
-	.byte 0x04		/* DW_CFA_advance_loc4 */
-	.long .Lpop_edx-.Lpop_ebp
-	.byte 0x0e		/* DW_CFA_def_cfa_offset */
-	.byte 0x08		/* RA at offset 8 now */
-	.byte 0x04		/* DW_CFA_advance_loc4 */
-	.long .Lpop_ecx-.Lpop_edx
-	.byte 0x0e		/* DW_CFA_def_cfa_offset */
-	.byte 0x04		/* RA at offset 4 now */
-	.align 4
-.LENDFDE1:
-
-#define SYSCALL_ENTER_KERNEL	int $0x80
-#include "vsyscall-sigreturn.S"

arch/x86/ia32/vsyscall.lds

@@ -1,80 +0,0 @@
-/*
- * Linker script for vsyscall DSO.  The vsyscall page is an ELF shared
- * object prelinked to its virtual address. This script controls its layout.
- */
-
-/* This must match <asm/fixmap.h>.  */
-VSYSCALL_BASE = 0xffffe000;
-
-SECTIONS
-{
-  . = VSYSCALL_BASE + SIZEOF_HEADERS;
-
-  .hash           : { *(.hash) }		:text
-  .gnu.hash       : { *(.gnu.hash) }
-  .dynsym         : { *(.dynsym) }
-  .dynstr         : { *(.dynstr) }
-  .gnu.version    : { *(.gnu.version) }
-  .gnu.version_d  : { *(.gnu.version_d) }
-  .gnu.version_r  : { *(.gnu.version_r) }
-
-  /* This linker script is used both with -r and with -shared.
-     For the layouts to match, we need to skip more than enough
-     space for the dynamic symbol table et al.  If this amount
-     is insufficient, ld -shared will barf.  Just increase it here.  */
-  . = VSYSCALL_BASE + 0x400;
-  
-  .text.vsyscall   : { *(.text.vsyscall) } 	:text =0x90909090
-
-  /* This is an 32bit object and we cannot easily get the offsets
-     into the 64bit kernel. Just hardcode them here. This assumes
-     that all the stubs don't need more than 0x100 bytes. */
-  . = VSYSCALL_BASE + 0x500;
-
-  .text.sigreturn  : { *(.text.sigreturn) }	:text =0x90909090
-
-  . = VSYSCALL_BASE + 0x600;
-
-  .text.rtsigreturn : { *(.text.rtsigreturn) }   :text =0x90909090
-	
-  .note		  : { *(.note.*) }		:text :note
-  .eh_frame_hdr   : { *(.eh_frame_hdr) }	:text :eh_frame_hdr
-  .eh_frame       : { KEEP (*(.eh_frame)) }	:text
-  .dynamic        : { *(.dynamic) }		:text :dynamic
-  .useless        : {
-  	*(.got.plt) *(.got)
-	*(.data .data.* .gnu.linkonce.d.*)
-	*(.dynbss)
-	*(.bss .bss.* .gnu.linkonce.b.*)
-  }						:text
-}
-
-/*
- * We must supply the ELF program headers explicitly to get just one
- * PT_LOAD segment, and set the flags explicitly to make segments read-only.
- */
-PHDRS
-{
-  text PT_LOAD FILEHDR PHDRS FLAGS(5); /* PF_R|PF_X */
-  dynamic PT_DYNAMIC FLAGS(4); /* PF_R */
-  note PT_NOTE FLAGS(4); /* PF_R */
-  eh_frame_hdr 0x6474e550; /* PT_GNU_EH_FRAME, but ld doesn't match the name */
-}
-
-/*
- * This controls what symbols we export from the DSO.
- */
-VERSION
-{
-  LINUX_2.5 {
-    global:
-    	__kernel_vsyscall;
-    	__kernel_sigreturn;
-    	__kernel_rt_sigreturn;
-
-    local: *;
-  };
-}
-
-/* The ELF entry point can be used to set the AT_SYSINFO value.  */
-ENTRY(__kernel_vsyscall);

arch/x86/kernel/Makefile

@@ -1,9 +1,91 @@
-ifeq ($(CONFIG_X86_32),y)
-include ${srctree}/arch/x86/kernel/Makefile_32
-else
-include ${srctree}/arch/x86/kernel/Makefile_64
+#
+# Makefile for the linux kernel.
+#
+
+extra-y                := head_$(BITS).o init_task.o vmlinux.lds
+extra-$(CONFIG_X86_64) += head64.o
+
+CPPFLAGS_vmlinux.lds += -U$(UTS_MACHINE)
+CFLAGS_vsyscall_64.o := $(PROFILING) -g0
+
+obj-y			:= process_$(BITS).o signal_$(BITS).o entry_$(BITS).o
+obj-y			+= traps_$(BITS).o irq_$(BITS).o
+obj-y			+= time_$(BITS).o ioport.o ldt.o
+obj-y			+= setup_$(BITS).o i8259_$(BITS).o
+obj-$(CONFIG_X86_32)	+= sys_i386_32.o i386_ksyms_32.o
+obj-$(CONFIG_X86_64)	+= sys_x86_64.o x8664_ksyms_64.o
+obj-$(CONFIG_X86_64)	+= syscall_64.o vsyscall_64.o setup64.o
+obj-y			+= pci-dma_$(BITS).o  bootflag.o e820_$(BITS).o
+obj-y			+= quirks.o i8237.o topology.o kdebugfs.o
+obj-y			+= alternative.o i8253.o
+obj-$(CONFIG_X86_64)	+= pci-nommu_64.o bugs_64.o
+obj-y			+= tsc_$(BITS).o io_delay.o rtc.o
+
+obj-y				+= i387.o
+obj-y				+= ptrace.o
+obj-y				+= ds.o
+obj-$(CONFIG_X86_32)		+= tls.o
+obj-$(CONFIG_IA32_EMULATION)	+= tls.o
+obj-y				+= step.o
+obj-$(CONFIG_STACKTRACE)	+= stacktrace.o
+obj-y				+= cpu/
+obj-y				+= acpi/
+obj-$(CONFIG_X86_BIOS_REBOOT)	+= reboot.o
+obj-$(CONFIG_X86_64)		+= reboot.o
+obj-$(CONFIG_MCA)		+= mca_32.o
+obj-$(CONFIG_X86_MSR)		+= msr.o
+obj-$(CONFIG_X86_CPUID)		+= cpuid.o
+obj-$(CONFIG_MICROCODE)		+= microcode.o
+obj-$(CONFIG_PCI)		+= early-quirks.o
+obj-$(CONFIG_APM)		+= apm_32.o
+obj-$(CONFIG_X86_SMP)		+= smp_$(BITS).o smpboot_$(BITS).o tsc_sync.o
+obj-$(CONFIG_X86_32_SMP)	+= smpcommon_32.o
+obj-$(CONFIG_X86_64_SMP)	+= smp_64.o smpboot_64.o tsc_sync.o
+obj-$(CONFIG_X86_TRAMPOLINE)	+= trampoline_$(BITS).o
+obj-$(CONFIG_X86_MPPARSE)	+= mpparse_$(BITS).o
+obj-$(CONFIG_X86_LOCAL_APIC)	+= apic_$(BITS).o nmi_$(BITS).o
+obj-$(CONFIG_X86_IO_APIC)	+= io_apic_$(BITS).o
+obj-$(CONFIG_X86_REBOOTFIXUPS)	+= reboot_fixups_32.o
+obj-$(CONFIG_KEXEC)		+= machine_kexec_$(BITS).o
+obj-$(CONFIG_KEXEC)		+= relocate_kernel_$(BITS).o crash.o
+obj-$(CONFIG_CRASH_DUMP)	+= crash_dump_$(BITS).o
+obj-$(CONFIG_X86_NUMAQ)		+= numaq_32.o
+obj-$(CONFIG_X86_SUMMIT_NUMA)	+= summit_32.o
+obj-$(CONFIG_X86_VSMP)		+= vsmp_64.o
+obj-$(CONFIG_KPROBES)		+= kprobes.o
+obj-$(CONFIG_MODULES)		+= module_$(BITS).o
+obj-$(CONFIG_ACPI_SRAT) 	+= srat_32.o
+obj-$(CONFIG_EFI) 		+= efi.o efi_$(BITS).o efi_stub_$(BITS).o
+obj-$(CONFIG_DOUBLEFAULT) 	+= doublefault_32.o
+obj-$(CONFIG_VM86)		+= vm86_32.o
+obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
+
+obj-$(CONFIG_HPET_TIMER) 	+= hpet.o
+
+obj-$(CONFIG_K8_NB)		+= k8.o
+obj-$(CONFIG_MGEODE_LX)		+= geode_32.o mfgpt_32.o
+obj-$(CONFIG_DEBUG_RODATA_TEST)	+= test_rodata.o
+obj-$(CONFIG_DEBUG_NX_TEST)	+= test_nx.o
+
+obj-$(CONFIG_VMI)		+= vmi_32.o vmiclock_32.o
+obj-$(CONFIG_PARAVIRT)		+= paravirt.o paravirt_patch_$(BITS).o
+
+ifdef CONFIG_INPUT_PCSPKR
+obj-y				+= pcspeaker.o
 endif
 
-# Workaround to delete .lds files with make clean
-# The problem is that we do not enter Makefile_32 with make clean.
-clean-files := vsyscall*.lds vsyscall*.so
+obj-$(CONFIG_SCx200)		+= scx200_32.o
+
+###
+# 64 bit specific files
+ifeq ($(CONFIG_X86_64),y)
+        obj-y				+= genapic_64.o genapic_flat_64.o
+        obj-$(CONFIG_X86_PM_TIMER)	+= pmtimer_64.o
+        obj-$(CONFIG_AUDIT)		+= audit_64.o
+        obj-$(CONFIG_PM)		+= suspend_64.o
+        obj-$(CONFIG_HIBERNATION)	+= suspend_asm_64.o
+
+        obj-$(CONFIG_GART_IOMMU)	+= pci-gart_64.o aperture_64.o
+        obj-$(CONFIG_CALGARY_IOMMU)	+= pci-calgary_64.o tce_64.o
+        obj-$(CONFIG_SWIOTLB)		+= pci-swiotlb_64.o
+endif

arch/x86/kernel/Makefile_32

@@ -1,88 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-extra-y := head_32.o init_task.o vmlinux.lds
-CPPFLAGS_vmlinux.lds += -Ui386
-
-obj-y	:= process_32.o signal_32.o entry_32.o traps_32.o irq_32.o \
-		ptrace_32.o time_32.o ioport_32.o ldt_32.o setup_32.o i8259_32.o sys_i386_32.o \
-		pci-dma_32.o i386_ksyms_32.o i387_32.o bootflag.o e820_32.o\
-		quirks.o i8237.o topology.o alternative.o i8253.o tsc_32.o
-
-obj-$(CONFIG_STACKTRACE)	+= stacktrace.o
-obj-y				+= cpu/
-obj-y				+= acpi/
-obj-$(CONFIG_X86_BIOS_REBOOT)	+= reboot_32.o
-obj-$(CONFIG_MCA)		+= mca_32.o
-obj-$(CONFIG_X86_MSR)		+= msr.o
-obj-$(CONFIG_X86_CPUID)		+= cpuid.o
-obj-$(CONFIG_MICROCODE)		+= microcode.o
-obj-$(CONFIG_PCI)		+= early-quirks.o
-obj-$(CONFIG_APM)		+= apm_32.o
-obj-$(CONFIG_X86_SMP)		+= smp_32.o smpboot_32.o tsc_sync.o
-obj-$(CONFIG_SMP)		+= smpcommon_32.o
-obj-$(CONFIG_X86_TRAMPOLINE)	+= trampoline_32.o
-obj-$(CONFIG_X86_MPPARSE)	+= mpparse_32.o
-obj-$(CONFIG_X86_LOCAL_APIC)	+= apic_32.o nmi_32.o
-obj-$(CONFIG_X86_IO_APIC)	+= io_apic_32.o
-obj-$(CONFIG_X86_REBOOTFIXUPS)	+= reboot_fixups_32.o
-obj-$(CONFIG_KEXEC)		+= machine_kexec_32.o relocate_kernel_32.o crash.o
-obj-$(CONFIG_CRASH_DUMP)	+= crash_dump_32.o
-obj-$(CONFIG_X86_NUMAQ)		+= numaq_32.o
-obj-$(CONFIG_X86_SUMMIT_NUMA)	+= summit_32.o
-obj-$(CONFIG_KPROBES)		+= kprobes_32.o
-obj-$(CONFIG_MODULES)		+= module_32.o
-obj-y				+= sysenter_32.o vsyscall_32.o
-obj-$(CONFIG_ACPI_SRAT) 	+= srat_32.o
-obj-$(CONFIG_EFI) 		+= efi_32.o efi_stub_32.o
-obj-$(CONFIG_DOUBLEFAULT) 	+= doublefault_32.o
-obj-$(CONFIG_VM86)		+= vm86_32.o
-obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
-obj-$(CONFIG_HPET_TIMER) 	+= hpet.o
-obj-$(CONFIG_K8_NB)		+= k8.o
-obj-$(CONFIG_MGEODE_LX)		+= geode_32.o mfgpt_32.o
-
-obj-$(CONFIG_VMI)		+= vmi_32.o vmiclock_32.o
-obj-$(CONFIG_PARAVIRT)		+= paravirt_32.o
-obj-y				+= pcspeaker.o
-
-obj-$(CONFIG_SCx200)		+= scx200_32.o
-
-# vsyscall_32.o contains the vsyscall DSO images as __initdata.
-# We must build both images before we can assemble it.
-# Note: kbuild does not track this dependency due to usage of .incbin
-$(obj)/vsyscall_32.o: $(obj)/vsyscall-int80_32.so $(obj)/vsyscall-sysenter_32.so
-targets += $(foreach F,int80 sysenter,vsyscall-$F_32.o vsyscall-$F_32.so)
-targets += vsyscall-note_32.o vsyscall_32.lds
-
-# The DSO images are built using a special linker script.
-quiet_cmd_syscall = SYSCALL $@
-      cmd_syscall = $(CC) -m elf_i386 -nostdlib $(SYSCFLAGS_$(@F)) \
-		          -Wl,-T,$(filter-out FORCE,$^) -o $@
-
-export CPPFLAGS_vsyscall_32.lds += -P -C -Ui386
-
-vsyscall-flags = -shared -s -Wl,-soname=linux-gate.so.1 \
-		 $(call ld-option, -Wl$(comma)--hash-style=sysv)
-SYSCFLAGS_vsyscall-sysenter_32.so	= $(vsyscall-flags)
-SYSCFLAGS_vsyscall-int80_32.so	= $(vsyscall-flags)
-
-$(obj)/vsyscall-int80_32.so $(obj)/vsyscall-sysenter_32.so: \
-$(obj)/vsyscall-%.so: $(src)/vsyscall_32.lds \
-		      $(obj)/vsyscall-%.o $(obj)/vsyscall-note_32.o FORCE
-	$(call if_changed,syscall)
-
-# We also create a special relocatable object that should mirror the symbol
-# table and layout of the linked DSO.  With ld -R we can then refer to
-# these symbols in the kernel code rather than hand-coded addresses.
-extra-y += vsyscall-syms.o
-$(obj)/built-in.o: $(obj)/vsyscall-syms.o
-$(obj)/built-in.o: ld_flags += -R $(obj)/vsyscall-syms.o
-
-SYSCFLAGS_vsyscall-syms.o = -r
-$(obj)/vsyscall-syms.o: $(src)/vsyscall_32.lds \
-			$(obj)/vsyscall-sysenter_32.o $(obj)/vsyscall-note_32.o FORCE
-	$(call if_changed,syscall)
-
-

arch/x86/kernel/Makefile_64

@@ -1,45 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-extra-y 	:= head_64.o head64.o init_task.o vmlinux.lds
-CPPFLAGS_vmlinux.lds += -Ux86_64
-EXTRA_AFLAGS	:= -traditional
-
-obj-y	:= process_64.o signal_64.o entry_64.o traps_64.o irq_64.o \
-		ptrace_64.o time_64.o ioport_64.o ldt_64.o setup_64.o i8259_64.o sys_x86_64.o \
-		x8664_ksyms_64.o i387_64.o syscall_64.o vsyscall_64.o \
-		setup64.o bootflag.o e820_64.o reboot_64.o quirks.o i8237.o \
-		pci-dma_64.o pci-nommu_64.o alternative.o hpet.o tsc_64.o bugs_64.o \
-		i8253.o
-
-obj-$(CONFIG_STACKTRACE)	+= stacktrace.o
-obj-y				+= cpu/
-obj-y				+= acpi/
-obj-$(CONFIG_X86_MSR)		+= msr.o
-obj-$(CONFIG_MICROCODE)		+= microcode.o
-obj-$(CONFIG_X86_CPUID)		+= cpuid.o
-obj-$(CONFIG_SMP)		+= smp_64.o smpboot_64.o trampoline_64.o tsc_sync.o
-obj-y				+= apic_64.o  nmi_64.o
-obj-y				+= io_apic_64.o mpparse_64.o genapic_64.o genapic_flat_64.o
-obj-$(CONFIG_KEXEC)		+= machine_kexec_64.o relocate_kernel_64.o crash.o
-obj-$(CONFIG_CRASH_DUMP)	+= crash_dump_64.o
-obj-$(CONFIG_PM)		+= suspend_64.o
-obj-$(CONFIG_HIBERNATION)	+= suspend_asm_64.o
-obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
-obj-$(CONFIG_GART_IOMMU)	+= pci-gart_64.o aperture_64.o
-obj-$(CONFIG_CALGARY_IOMMU)	+= pci-calgary_64.o tce_64.o
-obj-$(CONFIG_SWIOTLB)		+= pci-swiotlb_64.o
-obj-$(CONFIG_KPROBES)		+= kprobes_64.o
-obj-$(CONFIG_X86_PM_TIMER)	+= pmtimer_64.o
-obj-$(CONFIG_X86_VSMP)		+= vsmp_64.o
-obj-$(CONFIG_K8_NB)		+= k8.o
-obj-$(CONFIG_AUDIT)		+= audit_64.o
-
-obj-$(CONFIG_MODULES)		+= module_64.o
-obj-$(CONFIG_PCI)		+= early-quirks.o
-
-obj-y				+= topology.o
-obj-y				+= pcspeaker.o
-
-CFLAGS_vsyscall_64.o		:= $(PROFILING) -g0

arch/x86/kernel/acpi/Makefile

@@ -1,5 +1,5 @@
 obj-$(CONFIG_ACPI)		+= boot.o
-obj-$(CONFIG_ACPI_SLEEP)	+= sleep_$(BITS).o wakeup_$(BITS).o
+obj-$(CONFIG_ACPI_SLEEP)	+= sleep.o wakeup_$(BITS).o
 
 ifneq ($(CONFIG_ACPI_PROCESSOR),)
 obj-y				+= cstate.o processor.o

arch/x86/kernel/acpi/sleep.c

@@ -0,0 +1,87 @@
+/*
+ * sleep.c - x86-specific ACPI sleep support.
+ *
+ *  Copyright (C) 2001-2003 Patrick Mochel
+ *  Copyright (C) 2001-2003 Pavel Machek <pavel@suse.cz>
+ */
+
+#include <linux/acpi.h>
+#include <linux/bootmem.h>
+#include <linux/dmi.h>
+#include <linux/cpumask.h>
+
+#include <asm/smp.h>
+
+/* address in low memory of the wakeup routine. */
+unsigned long acpi_wakeup_address = 0;
+unsigned long acpi_realmode_flags;
+extern char wakeup_start, wakeup_end;
+
+extern unsigned long acpi_copy_wakeup_routine(unsigned long);
+
+/**
+ * acpi_save_state_mem - save kernel state
+ *
+ * Create an identity mapped page table and copy the wakeup routine to
+ * low memory.
+ */
+int acpi_save_state_mem(void)
+{
+	if (!acpi_wakeup_address) {
+		printk(KERN_ERR "Could not allocate memory during boot, S3 disabled\n");
+		return -ENOMEM;
+	}
+	memcpy((void *)acpi_wakeup_address, &wakeup_start,
+	       &wakeup_end - &wakeup_start);
+	acpi_copy_wakeup_routine(acpi_wakeup_address);
+
+	return 0;
+}
+
+/*
+ * acpi_restore_state - undo effects of acpi_save_state_mem
+ */
+void acpi_restore_state_mem(void)
+{
+}
+
+
+/**
+ * acpi_reserve_bootmem - do _very_ early ACPI initialisation
+ *
+ * We allocate a page from the first 1MB of memory for the wakeup
+ * routine for when we come back from a sleep state. The
+ * runtime allocator allows specification of <16MB pages, but not
+ * <1MB pages.
+ */
+void __init acpi_reserve_bootmem(void)
+{
+	if ((&wakeup_end - &wakeup_start) > PAGE_SIZE*2) {
+		printk(KERN_ERR
+		       "ACPI: Wakeup code way too big, S3 disabled.\n");
+		return;
+	}
+
+	acpi_wakeup_address = (unsigned long)alloc_bootmem_low(PAGE_SIZE*2);
+	if (!acpi_wakeup_address)
+		printk(KERN_ERR "ACPI: Cannot allocate lowmem, S3 disabled.\n");
+}
+
+
+static int __init acpi_sleep_setup(char *str)
+{
+	while ((str != NULL) && (*str != '\0')) {
+		if (strncmp(str, "s3_bios", 7) == 0)
+			acpi_realmode_flags |= 1;
+		if (strncmp(str, "s3_mode", 7) == 0)
+			acpi_realmode_flags |= 2;
+		if (strncmp(str, "s3_beep", 7) == 0)
+			acpi_realmode_flags |= 4;
+		str = strchr(str, ',');
+		if (str != NULL)
+			str += strspn(str, ", \t");
+	}
+	return 1;
+}
+
+__setup("acpi_sleep=", acpi_sleep_setup);

arch/x86/kernel/acpi/sleep_32.c

@@ -12,76 +12,6 @@
 
 #include <asm/smp.h>
 
-/* address in low memory of the wakeup routine. */
-unsigned long acpi_wakeup_address = 0;
-unsigned long acpi_realmode_flags;
-extern char wakeup_start, wakeup_end;
-
-extern unsigned long FASTCALL(acpi_copy_wakeup_routine(unsigned long));
-
-/**
- * acpi_save_state_mem - save kernel state
- *
- * Create an identity mapped page table and copy the wakeup routine to
- * low memory.
- */
-int acpi_save_state_mem(void)
-{
-	if (!acpi_wakeup_address)
-		return 1;
-	memcpy((void *)acpi_wakeup_address, &wakeup_start,
-	       &wakeup_end - &wakeup_start);
-	acpi_copy_wakeup_routine(acpi_wakeup_address);
-
-	return 0;
-}
-
-/*
- * acpi_restore_state - undo effects of acpi_save_state_mem
- */
-void acpi_restore_state_mem(void)
-{
-}
-
-/**
- * acpi_reserve_bootmem - do _very_ early ACPI initialisation
- *
- * We allocate a page from the first 1MB of memory for the wakeup
- * routine for when we come back from a sleep state. The
- * runtime allocator allows specification of <16MB pages, but not
- * <1MB pages.
- */
-void __init acpi_reserve_bootmem(void)
-{
-	if ((&wakeup_end - &wakeup_start) > PAGE_SIZE) {
-		printk(KERN_ERR
-		       "ACPI: Wakeup code way too big, S3 disabled.\n");
-		return;
-	}
-
-	acpi_wakeup_address = (unsigned long)alloc_bootmem_low(PAGE_SIZE);
-	if (!acpi_wakeup_address)
-		printk(KERN_ERR "ACPI: Cannot allocate lowmem, S3 disabled.\n");
-}
-
-static int __init acpi_sleep_setup(char *str)
-{
-	while ((str != NULL) && (*str != '\0')) {
-		if (strncmp(str, "s3_bios", 7) == 0)
-			acpi_realmode_flags |= 1;
-		if (strncmp(str, "s3_mode", 7) == 0)
-			acpi_realmode_flags |= 2;
-		if (strncmp(str, "s3_beep", 7) == 0)
-			acpi_realmode_flags |= 4;
-		str = strchr(str, ',');
-		if (str != NULL)
-			str += strspn(str, ", \t");
-	}
-	return 1;
-}
-
-__setup("acpi_sleep=", acpi_sleep_setup);
-
 /* Ouch, we want to delete this. We already have better version in userspace, in
    s2ram from suspend.sf.net project */
 static __init int reset_videomode_after_s3(const struct dmi_system_id *d)

arch/x86/kernel/acpi/sleep_64.c

@@ -1,117 +0,0 @@
-/*
- *  acpi.c - Architecture-Specific Low-Level ACPI Support
- *
- *  Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
- *  Copyright (C) 2001 Jun Nakajima <jun.nakajima@intel.com>
- *  Copyright (C) 2001 Patrick Mochel <mochel@osdl.org>
- *  Copyright (C) 2002 Andi Kleen, SuSE Labs (x86-64 port)
- *  Copyright (C) 2003 Pavel Machek, SuSE Labs
- *
- * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/stddef.h>
-#include <linux/slab.h>
-#include <linux/pci.h>
-#include <linux/bootmem.h>
-#include <linux/acpi.h>
-#include <linux/cpumask.h>
-
-#include <asm/mpspec.h>
-#include <asm/io.h>
-#include <asm/apic.h>
-#include <asm/apicdef.h>
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/pgalloc.h>
-#include <asm/io_apic.h>
-#include <asm/proto.h>
-#include <asm/tlbflush.h>
-
-/* --------------------------------------------------------------------------
-                              Low-Level Sleep Support
-   -------------------------------------------------------------------------- */
-
-/* address in low memory of the wakeup routine. */
-unsigned long acpi_wakeup_address = 0;
-unsigned long acpi_realmode_flags;
-extern char wakeup_start, wakeup_end;
-
-extern unsigned long acpi_copy_wakeup_routine(unsigned long);
-
-/**
- * acpi_save_state_mem - save kernel state
- *
- * Create an identity mapped page table and copy the wakeup routine to
- * low memory.
- */
-int acpi_save_state_mem(void)
-{
-	memcpy((void *)acpi_wakeup_address, &wakeup_start,
-	       &wakeup_end - &wakeup_start);
-	acpi_copy_wakeup_routine(acpi_wakeup_address);
-
-	return 0;
-}
-
-/*
- * acpi_restore_state
- */
-void acpi_restore_state_mem(void)
-{
-}
-
-/**
- * acpi_reserve_bootmem - do _very_ early ACPI initialisation
- *
- * We allocate a page in low memory for the wakeup
- * routine for when we come back from a sleep state. The
- * runtime allocator allows specification of <16M pages, but not
- * <1M pages.
- */
-void __init acpi_reserve_bootmem(void)
-{
-	acpi_wakeup_address = (unsigned long)alloc_bootmem_low(PAGE_SIZE*2);
-	if ((&wakeup_end - &wakeup_start) > (PAGE_SIZE*2))
-		printk(KERN_CRIT
-		       "ACPI: Wakeup code way too big, will crash on attempt"
-		       " to suspend\n");
-}
-
-static int __init acpi_sleep_setup(char *str)
-{
-	while ((str != NULL) && (*str != '\0')) {
-		if (strncmp(str, "s3_bios", 7) == 0)
-			acpi_realmode_flags |= 1;
-		if (strncmp(str, "s3_mode", 7) == 0)
-			acpi_realmode_flags |= 2;
-		if (strncmp(str, "s3_beep", 7) == 0)
-			acpi_realmode_flags |= 4;
-		str = strchr(str, ',');
-		if (str != NULL)
-			str += strspn(str, ", \t");
-	}
-	return 1;
-}
-
-__setup("acpi_sleep=", acpi_sleep_setup);
-

arch/x86/kernel/acpi/wakeup_32.S

@@ -1,4 +1,4 @@
-.text
+	.section .text.page_aligned
 #include <linux/linkage.h>
 #include <asm/segment.h>
 #include <asm/page.h>

arch/x86/kernel/acpi/wakeup_64.S

@@ -344,13 +344,13 @@ do_suspend_lowlevel:
 	call	save_processor_state
 
 	movq	$saved_context, %rax
-	movq	%rsp, pt_regs_rsp(%rax)
-	movq	%rbp, pt_regs_rbp(%rax)
-	movq	%rsi, pt_regs_rsi(%rax)
-	movq	%rdi, pt_regs_rdi(%rax)
-	movq	%rbx, pt_regs_rbx(%rax)
-	movq	%rcx, pt_regs_rcx(%rax)
-	movq	%rdx, pt_regs_rdx(%rax)
+	movq	%rsp, pt_regs_sp(%rax)
+	movq	%rbp, pt_regs_bp(%rax)
+	movq	%rsi, pt_regs_si(%rax)
+	movq	%rdi, pt_regs_di(%rax)
+	movq	%rbx, pt_regs_bx(%rax)
+	movq	%rcx, pt_regs_cx(%rax)
+	movq	%rdx, pt_regs_dx(%rax)
 	movq	%r8, pt_regs_r8(%rax)
 	movq	%r9, pt_regs_r9(%rax)
 	movq	%r10, pt_regs_r10(%rax)
@@ -360,7 +360,7 @@ do_suspend_lowlevel:
 	movq	%r14, pt_regs_r14(%rax)
 	movq	%r15, pt_regs_r15(%rax)
 	pushfq
-	popq	pt_regs_eflags(%rax)
+	popq	pt_regs_flags(%rax)
 
 	movq	$.L97, saved_rip(%rip)
 
@@ -391,15 +391,15 @@ do_suspend_lowlevel:
 	movq	%rbx, %cr2
 	movq	saved_context_cr0(%rax), %rbx
 	movq	%rbx, %cr0
-	pushq	pt_regs_eflags(%rax)
+	pushq	pt_regs_flags(%rax)
 	popfq
-	movq	pt_regs_rsp(%rax), %rsp
-	movq	pt_regs_rbp(%rax), %rbp
-	movq	pt_regs_rsi(%rax), %rsi
-	movq	pt_regs_rdi(%rax), %rdi
-	movq	pt_regs_rbx(%rax), %rbx
-	movq	pt_regs_rcx(%rax), %rcx
-	movq	pt_regs_rdx(%rax), %rdx
+	movq	pt_regs_sp(%rax), %rsp
+	movq	pt_regs_bp(%rax), %rbp
+	movq	pt_regs_si(%rax), %rsi
+	movq	pt_regs_di(%rax), %rdi
+	movq	pt_regs_bx(%rax), %rbx
+	movq	pt_regs_cx(%rax), %rcx
+	movq	pt_regs_dx(%rax), %rdx
 	movq	pt_regs_r8(%rax), %r8
 	movq	pt_regs_r9(%rax), %r9
 	movq	pt_regs_r10(%rax), %r10

arch/x86/kernel/alternative.c

@@ -273,6 +273,7 @@ struct smp_alt_module {
 };
 static LIST_HEAD(smp_alt_modules);
 static DEFINE_SPINLOCK(smp_alt);
+static int smp_mode = 1;	/* protected by smp_alt */
 
 void alternatives_smp_module_add(struct module *mod, char *name,
 				 void *locks, void *locks_end,
@@ -341,12 +342,13 @@ void alternatives_smp_switch(int smp)
 
 #ifdef CONFIG_LOCKDEP
 	/*
-	 * A not yet fixed binutils section handling bug prevents
-	 * alternatives-replacement from working reliably, so turn
-	 * it off:
+	 * Older binutils section handling bug prevented
+	 * alternatives-replacement from working reliably.
+	 *
+	 * If this still occurs then you should see a hang
+	 * or crash shortly after this line:
 	 */
-	printk("lockdep: not fixing up alternatives.\n");
-	return;
+	printk("lockdep: fixing up alternatives.\n");
 #endif
 
 	if (noreplace_smp || smp_alt_once)
@@ -354,21 +356,29 @@ void alternatives_smp_switch(int smp)
 	BUG_ON(!smp && (num_online_cpus() > 1));
 
 	spin_lock_irqsave(&smp_alt, flags);
-	if (smp) {
+
+	/*
+	 * Avoid unnecessary switches because it forces JIT based VMs to
+	 * throw away all cached translations, which can be quite costly.
+	 */
+	if (smp == smp_mode) {
+		/* nothing */
+	} else if (smp) {
 		printk(KERN_INFO "SMP alternatives: switching to SMP code\n");
-		clear_bit(X86_FEATURE_UP, boot_cpu_data.x86_capability);
-		clear_bit(X86_FEATURE_UP, cpu_data(0).x86_capability);
+		clear_cpu_cap(&boot_cpu_data, X86_FEATURE_UP);
+		clear_cpu_cap(&cpu_data(0), X86_FEATURE_UP);
 		list_for_each_entry(mod, &smp_alt_modules, next)
 			alternatives_smp_lock(mod->locks, mod->locks_end,
 					      mod->text, mod->text_end);
 	} else {
 		printk(KERN_INFO "SMP alternatives: switching to UP code\n");
-		set_bit(X86_FEATURE_UP, boot_cpu_data.x86_capability);
-		set_bit(X86_FEATURE_UP, cpu_data(0).x86_capability);
+		set_cpu_cap(&boot_cpu_data, X86_FEATURE_UP);
+		set_cpu_cap(&cpu_data(0), X86_FEATURE_UP);
 		list_for_each_entry(mod, &smp_alt_modules, next)
 			alternatives_smp_unlock(mod->locks, mod->locks_end,
 						mod->text, mod->text_end);
 	}
+	smp_mode = smp;
 	spin_unlock_irqrestore(&smp_alt, flags);
 }
 
@@ -431,8 +441,9 @@ void __init alternative_instructions(void)
 	if (smp_alt_once) {
 		if (1 == num_possible_cpus()) {
 			printk(KERN_INFO "SMP alternatives: switching to UP code\n");
-			set_bit(X86_FEATURE_UP, boot_cpu_data.x86_capability);
-			set_bit(X86_FEATURE_UP, cpu_data(0).x86_capability);
+			set_cpu_cap(&boot_cpu_data, X86_FEATURE_UP);
+			set_cpu_cap(&cpu_data(0), X86_FEATURE_UP);
+
 			alternatives_smp_unlock(__smp_locks, __smp_locks_end,
 						_text, _etext);
 		}
@@ -440,7 +451,10 @@ void __init alternative_instructions(void)
 		alternatives_smp_module_add(NULL, "core kernel",
 					    __smp_locks, __smp_locks_end,
 					    _text, _etext);
-		alternatives_smp_switch(0);
+
+		/* Only switch to UP mode if we don't immediately boot others */
+		if (num_possible_cpus() == 1 || setup_max_cpus <= 1)
+			alternatives_smp_switch(0);
 	}
 #endif
  	apply_paravirt(__parainstructions, __parainstructions_end);

arch/x86/kernel/aperture_64.c

@@ -1,12 +1,12 @@
-/* 
+/*
  * Firmware replacement code.
- * 
+ *
  * Work around broken BIOSes that don't set an aperture or only set the
- * aperture in the AGP bridge. 
- * If all fails map the aperture over some low memory.  This is cheaper than 
- * doing bounce buffering. The memory is lost. This is done at early boot 
- * because only the bootmem allocator can allocate 32+MB. 
- * 
+ * aperture in the AGP bridge.
+ * If all fails map the aperture over some low memory.  This is cheaper than
+ * doing bounce buffering. The memory is lost. This is done at early boot
+ * because only the bootmem allocator can allocate 32+MB.
+ *
  * Copyright 2002 Andi Kleen, SuSE Labs.
  */
 #include <linux/kernel.h>
@@ -30,7 +30,7 @@ int gart_iommu_aperture_disabled __initdata = 0;
 int gart_iommu_aperture_allowed __initdata = 0;
 
 int fallback_aper_order __initdata = 1; /* 64MB */
-int fallback_aper_force __initdata = 0; 
+int fallback_aper_force __initdata = 0;
 
 int fix_aperture __initdata = 1;
 
@@ -49,167 +49,270 @@ static void __init insert_aperture_resource(u32 aper_base, u32 aper_size)
 /* This code runs before the PCI subsystem is initialized, so just
    access the northbridge directly. */
 
-static u32 __init allocate_aperture(void) 
+static u32 __init allocate_aperture(void)
 {
 	u32 aper_size;
-	void *p; 
+	void *p;
 
-	if (fallback_aper_order > 7) 
-		fallback_aper_order = 7; 
-	aper_size = (32 * 1024 * 1024) << fallback_aper_order; 
+	if (fallback_aper_order > 7)
+		fallback_aper_order = 7;
+	aper_size = (32 * 1024 * 1024) << fallback_aper_order;
 
-	/* 
-	 * Aperture has to be naturally aligned. This means an 2GB aperture won't
-	 * have much chance of finding a place in the lower 4GB of memory.
-	 * Unfortunately we cannot move it up because that would make the
-	 * IOMMU useless.
+	/*
+	 * Aperture has to be naturally aligned. This means a 2GB aperture
+	 * won't have much chance of finding a place in the lower 4GB of
+	 * memory. Unfortunately we cannot move it up because that would
+	 * make the IOMMU useless.
 	 */
 	p = __alloc_bootmem_nopanic(aper_size, aper_size, 0);
 	if (!p || __pa(p)+aper_size > 0xffffffff) {
-		printk("Cannot allocate aperture memory hole (%p,%uK)\n",
-		       p, aper_size>>10);
+		printk(KERN_ERR
+			"Cannot allocate aperture memory hole (%p,%uK)\n",
+				p, aper_size>>10);
 		if (p)
 			free_bootmem(__pa(p), aper_size);
 		return 0;
 	}
-	printk("Mapping aperture over %d KB of RAM @ %lx\n",
-	       aper_size >> 10, __pa(p)); 
+	printk(KERN_INFO "Mapping aperture over %d KB of RAM @ %lx\n",
+			aper_size >> 10, __pa(p));
 	insert_aperture_resource((u32)__pa(p), aper_size);
-	return (u32)__pa(p); 
+
+	return (u32)__pa(p);
 }
 
 static int __init aperture_valid(u64 aper_base, u32 aper_size)
-{ 
-	if (!aper_base) 
-		return 0;
-	if (aper_size < 64*1024*1024) { 
-		printk("Aperture too small (%d MB)\n", aper_size>>20);
+{
+	if (!aper_base)
 		return 0;
-	}
+
 	if (aper_base + aper_size > 0x100000000UL) {
-		printk("Aperture beyond 4GB. Ignoring.\n");
-		return 0; 
+		printk(KERN_ERR "Aperture beyond 4GB. Ignoring.\n");
+		return 0;
 	}
 	if (e820_any_mapped(aper_base, aper_base + aper_size, E820_RAM)) {
-		printk("Aperture pointing to e820 RAM. Ignoring.\n");
-		return 0; 
-	} 
+		printk(KERN_ERR "Aperture pointing to e820 RAM. Ignoring.\n");
+		return 0;
+	}
+	if (aper_size < 64*1024*1024) {
+		printk(KERN_ERR "Aperture too small (%d MB)\n", aper_size>>20);
+		return 0;
+	}
+
 	return 1;
-} 
+}
 
 /* Find a PCI capability */
-static __u32 __init find_cap(int num, int slot, int func, int cap) 
-{ 
-	u8 pos;
+static __u32 __init find_cap(int num, int slot, int func, int cap)
+{
 	int bytes;
-	if (!(read_pci_config_16(num,slot,func,PCI_STATUS) & PCI_STATUS_CAP_LIST))
+	u8 pos;
+
+	if (!(read_pci_config_16(num, slot, func, PCI_STATUS) &
+						PCI_STATUS_CAP_LIST))
 		return 0;
-	pos = read_pci_config_byte(num,slot,func,PCI_CAPABILITY_LIST);
-	for (bytes = 0; bytes < 48 && pos >= 0x40; bytes++) { 
+
+	pos = read_pci_config_byte(num, slot, func, PCI_CAPABILITY_LIST);
+	for (bytes = 0; bytes < 48 && pos >= 0x40; bytes++) {
 		u8 id;
-		pos &= ~3; 
-		id = read_pci_config_byte(num,slot,func,pos+PCI_CAP_LIST_ID);
+
+		pos &= ~3;
+		id = read_pci_config_byte(num, slot, func, pos+PCI_CAP_LIST_ID);
 		if (id == 0xff)
 			break;
-		if (id == cap) 
-			return pos; 
-		pos = read_pci_config_byte(num,slot,func,pos+PCI_CAP_LIST_NEXT); 
-	} 
+		if (id == cap)
+			return pos;
+		pos = read_pci_config_byte(num, slot, func,
+						pos+PCI_CAP_LIST_NEXT);
+	}
 	return 0;
-} 
+}
 
 /* Read a standard AGPv3 bridge header */
 static __u32 __init read_agp(int num, int slot, int func, int cap, u32 *order)
-{ 
+{
 	u32 apsize;
 	u32 apsizereg;
 	int nbits;
 	u32 aper_low, aper_hi;
 	u64 aper;
 
-	printk("AGP bridge at %02x:%02x:%02x\n", num, slot, func);
-	apsizereg = read_pci_config_16(num,slot,func, cap + 0x14);
+	printk(KERN_INFO "AGP bridge at %02x:%02x:%02x\n", num, slot, func);
+	apsizereg = read_pci_config_16(num, slot, func, cap + 0x14);
 	if (apsizereg == 0xffffffff) {
-		printk("APSIZE in AGP bridge unreadable\n");
+		printk(KERN_ERR "APSIZE in AGP bridge unreadable\n");
 		return 0;
 	}
 
 	apsize = apsizereg & 0xfff;
 	/* Some BIOS use weird encodings not in the AGPv3 table. */
-	if (apsize & 0xff) 
-		apsize |= 0xf00; 
+	if (apsize & 0xff)
+		apsize |= 0xf00;
 	nbits = hweight16(apsize);
 	*order = 7 - nbits;
 	if ((int)*order < 0) /* < 32MB */
 		*order = 0;
-	
-	aper_low = read_pci_config(num,slot,func, 0x10);
-	aper_hi = read_pci_config(num,slot,func,0x14);
+
+	aper_low = read_pci_config(num, slot, func, 0x10);
+	aper_hi = read_pci_config(num, slot, func, 0x14);
 	aper = (aper_low & ~((1<<22)-1)) | ((u64)aper_hi << 32);
 
-	printk("Aperture from AGP @ %Lx size %u MB (APSIZE %x)\n", 
-	       aper, 32 << *order, apsizereg);
+	printk(KERN_INFO "Aperture from AGP @ %Lx size %u MB (APSIZE %x)\n",
+			aper, 32 << *order, apsizereg);
 
 	if (!aperture_valid(aper, (32*1024*1024) << *order))
-	    return 0;
-	return (u32)aper; 
-} 
-
-/* Look for an AGP bridge. Windows only expects the aperture in the
-   AGP bridge and some BIOS forget to initialize the Northbridge too.
-   Work around this here. 
-
-   Do an PCI bus scan by hand because we're running before the PCI
-   subsystem. 
+		return 0;
+	return (u32)aper;
+}
 
-   All K8 AGP bridges are AGPv3 compliant, so we can do this scan
-   generically. It's probably overkill to always scan all slots because
-   the AGP bridges should be always an own bus on the HT hierarchy, 
-   but do it here for future safety. */
+/*
+ * Look for an AGP bridge. Windows only expects the aperture in the
+ * AGP bridge and some BIOS forget to initialize the Northbridge too.
+ * Work around this here.
+ *
+ * Do an PCI bus scan by hand because we're running before the PCI
+ * subsystem.
+ *
+ * All K8 AGP bridges are AGPv3 compliant, so we can do this scan
+ * generically. It's probably overkill to always scan all slots because
+ * the AGP bridges should be always an own bus on the HT hierarchy,
+ * but do it here for future safety.
+ */
 static __u32 __init search_agp_bridge(u32 *order, int *valid_agp)
 {
 	int num, slot, func;
 
 	/* Poor man's PCI discovery */
-	for (num = 0; num < 256; num++) { 
-		for (slot = 0; slot < 32; slot++) { 
-			for (func = 0; func < 8; func++) { 
+	for (num = 0; num < 256; num++) {
+		for (slot = 0; slot < 32; slot++) {
+			for (func = 0; func < 8; func++) {
 				u32 class, cap;
 				u8 type;
-				class = read_pci_config(num,slot,func,
+				class = read_pci_config(num, slot, func,
 							PCI_CLASS_REVISION);
 				if (class == 0xffffffff)
-					break; 
-				
-				switch (class >> 16) { 
+					break;
+
+				switch (class >> 16) {
 				case PCI_CLASS_BRIDGE_HOST:
 				case PCI_CLASS_BRIDGE_OTHER: /* needed? */
 					/* AGP bridge? */
-					cap = find_cap(num,slot,func,PCI_CAP_ID_AGP);
+					cap = find_cap(num, slot, func,
+							PCI_CAP_ID_AGP);
 					if (!cap)
 						break;
-					*valid_agp = 1; 
-					return read_agp(num,slot,func,cap,order);
-				} 
-				
+					*valid_agp = 1;
+					return read_agp(num, slot, func, cap,
+							order);
+				}
+
 				/* No multi-function device? */
-				type = read_pci_config_byte(num,slot,func,
+				type = read_pci_config_byte(num, slot, func,
 							       PCI_HEADER_TYPE);
 				if (!(type & 0x80))
 					break;
-			} 
-		} 
+			}
+		}
 	}
-	printk("No AGP bridge found\n"); 
+	printk(KERN_INFO "No AGP bridge found\n");
+
 	return 0;
 }
 
+static int gart_fix_e820 __initdata = 1;
+
+static int __init parse_gart_mem(char *p)
+{
+	if (!p)
+		return -EINVAL;
+
+	if (!strncmp(p, "off", 3))
+		gart_fix_e820 = 0;
+	else if (!strncmp(p, "on", 2))
+		gart_fix_e820 = 1;
+
+	return 0;
+}
+early_param("gart_fix_e820", parse_gart_mem);
+
+void __init early_gart_iommu_check(void)
+{
+	/*
+	 * in case it is enabled before, esp for kexec/kdump,
+	 * previous kernel already enable that. memset called
+	 * by allocate_aperture/__alloc_bootmem_nopanic cause restart.
+	 * or second kernel have different position for GART hole. and new
+	 * kernel could use hole as RAM that is still used by GART set by
+	 * first kernel
+	 * or BIOS forget to put that in reserved.
+	 * try to update e820 to make that region as reserved.
+	 */
+	int fix, num;
+	u32 ctl;
+	u32 aper_size = 0, aper_order = 0, last_aper_order = 0;
+	u64 aper_base = 0, last_aper_base = 0;
+	int aper_enabled = 0, last_aper_enabled = 0;
+
+	if (!early_pci_allowed())
+		return;
+
+	fix = 0;
+	for (num = 24; num < 32; num++) {
+		if (!early_is_k8_nb(read_pci_config(0, num, 3, 0x00)))
+			continue;
+
+		ctl = read_pci_config(0, num, 3, 0x90);
+		aper_enabled = ctl & 1;
+		aper_order = (ctl >> 1) & 7;
+		aper_size = (32 * 1024 * 1024) << aper_order;
+		aper_base = read_pci_config(0, num, 3, 0x94) & 0x7fff;
+		aper_base <<= 25;
+
+		if ((last_aper_order && aper_order != last_aper_order) ||
+		    (last_aper_base && aper_base != last_aper_base) ||
+		    (last_aper_enabled && aper_enabled != last_aper_enabled)) {
+			fix = 1;
+			break;
+		}
+		last_aper_order = aper_order;
+		last_aper_base = aper_base;
+		last_aper_enabled = aper_enabled;
+	}
+
+	if (!fix && !aper_enabled)
+		return;
+
+	if (!aper_base || !aper_size || aper_base + aper_size > 0x100000000UL)
+		fix = 1;
+
+	if (gart_fix_e820 && !fix && aper_enabled) {
+		if (e820_any_mapped(aper_base, aper_base + aper_size,
+				    E820_RAM)) {
+			/* reserved it, so we can resuse it in second kernel */
+			printk(KERN_INFO "update e820 for GART\n");
+			add_memory_region(aper_base, aper_size, E820_RESERVED);
+			update_e820();
+		}
+		return;
+	}
+
+	/* different nodes have different setting, disable them all at first*/
+	for (num = 24; num < 32; num++) {
+		if (!early_is_k8_nb(read_pci_config(0, num, 3, 0x00)))
+			continue;
+
+		ctl = read_pci_config(0, num, 3, 0x90);
+		ctl &= ~1;
+		write_pci_config(0, num, 3, 0x90, ctl);
+	}
+
+}
+
 void __init gart_iommu_hole_init(void)
-{ 
-	int fix, num; 
+{
 	u32 aper_size, aper_alloc = 0, aper_order = 0, last_aper_order = 0;
 	u64 aper_base, last_aper_base = 0;
-	int valid_agp = 0;
+	int fix, num, valid_agp = 0;
+	int node;
 
 	if (gart_iommu_aperture_disabled || !fix_aperture ||
 	    !early_pci_allowed())
@@ -218,24 +321,26 @@ void __init gart_iommu_hole_init(void)
 	printk(KERN_INFO  "Checking aperture...\n");
 
 	fix = 0;
-	for (num = 24; num < 32; num++) {		
+	node = 0;
+	for (num = 24; num < 32; num++) {
 		if (!early_is_k8_nb(read_pci_config(0, num, 3, 0x00)))
 			continue;
 
 		iommu_detected = 1;
 		gart_iommu_aperture = 1;
 
-		aper_order = (read_pci_config(0, num, 3, 0x90) >> 1) & 7; 
-		aper_size = (32 * 1024 * 1024) << aper_order; 
+		aper_order = (read_pci_config(0, num, 3, 0x90) >> 1) & 7;
+		aper_size = (32 * 1024 * 1024) << aper_order;
 		aper_base = read_pci_config(0, num, 3, 0x94) & 0x7fff;
-		aper_base <<= 25; 
+		aper_base <<= 25;
+
+		printk(KERN_INFO "Node %d: aperture @ %Lx size %u MB\n",
+				node, aper_base, aper_size >> 20);
+		node++;
 
-		printk("CPU %d: aperture @ %Lx size %u MB\n", num-24, 
-		       aper_base, aper_size>>20);
-		
 		if (!aperture_valid(aper_base, aper_size)) {
-			fix = 1; 
-			break; 
+			fix = 1;
+			break;
 		}
 
 		if ((last_aper_order && aper_order != last_aper_order) ||
@@ -245,55 +350,64 @@ void __init gart_iommu_hole_init(void)
 		}
 		last_aper_order = aper_order;
 		last_aper_base = aper_base;
-	} 
+	}
 
 	if (!fix && !fallback_aper_force) {
 		if (last_aper_base) {
 			unsigned long n = (32 * 1024 * 1024) << last_aper_order;
+
 			insert_aperture_resource((u32)last_aper_base, n);
 		}
-		return; 
+		return;
 	}
 
 	if (!fallback_aper_force)
-		aper_alloc = search_agp_bridge(&aper_order, &valid_agp); 
-		
-	if (aper_alloc) { 
+		aper_alloc = search_agp_bridge(&aper_order, &valid_agp);
+
+	if (aper_alloc) {
 		/* Got the aperture from the AGP bridge */
 	} else if (swiotlb && !valid_agp) {
 		/* Do nothing */
 	} else if ((!no_iommu && end_pfn > MAX_DMA32_PFN) ||
 		   force_iommu ||
 		   valid_agp ||
-		   fallback_aper_force) { 
-		printk("Your BIOS doesn't leave a aperture memory hole\n");
-		printk("Please enable the IOMMU option in the BIOS setup\n");
-		printk("This costs you %d MB of RAM\n",
-		       32 << fallback_aper_order);
+		   fallback_aper_force) {
+		printk(KERN_ERR
+			"Your BIOS doesn't leave a aperture memory hole\n");
+		printk(KERN_ERR
+			"Please enable the IOMMU option in the BIOS setup\n");
+		printk(KERN_ERR
+			"This costs you %d MB of RAM\n",
+				32 << fallback_aper_order);
 
 		aper_order = fallback_aper_order;
 		aper_alloc = allocate_aperture();
-		if (!aper_alloc) { 
-			/* Could disable AGP and IOMMU here, but it's probably
-			   not worth it. But the later users cannot deal with
-			   bad apertures and turning on the aperture over memory
-			   causes very strange problems, so it's better to 
-			   panic early. */
+		if (!aper_alloc) {
+			/*
+			 * Could disable AGP and IOMMU here, but it's
+			 * probably not worth it. But the later users
+			 * cannot deal with bad apertures and turning
+			 * on the aperture over memory causes very
+			 * strange problems, so it's better to panic
+			 * early.
+			 */
 			panic("Not enough memory for aperture");
 		}
-	} else { 
-		return; 
-	} 
+	} else {
+		return;
+	}
 
 	/* Fix up the north bridges */
-	for (num = 24; num < 32; num++) { 		
+	for (num = 24; num < 32; num++) {
 		if (!early_is_k8_nb(read_pci_config(0, num, 3, 0x00)))
-			continue;	
-
-		/* Don't enable translation yet. That is done later. 
-		   Assume this BIOS didn't initialise the GART so 
-		   just overwrite all previous bits */ 
-		write_pci_config(0, num, 3, 0x90, aper_order<<1); 
-		write_pci_config(0, num, 3, 0x94, aper_alloc>>25); 
-	} 
-} 
+			continue;
+
+		/*
+		 * Don't enable translation yet. That is done later.
+		 * Assume this BIOS didn't initialise the GART so
+		 * just overwrite all previous bits
+		 */
+		write_pci_config(0, num, 3, 0x90, aper_order<<1);
+		write_pci_config(0, num, 3, 0x94, aper_alloc>>25);
+	}
+}

arch/x86/kernel/apic_32.c

@@ -43,12 +43,10 @@
 #include <mach_apicdef.h>
 #include <mach_ipi.h>
 
-#include "io_ports.h"
-
 /*
  * Sanity check
  */
-#if (SPURIOUS_APIC_VECTOR & 0x0F) != 0x0F
+#if ((SPURIOUS_APIC_VECTOR & 0x0F) != 0x0F)
 # error SPURIOUS_APIC_VECTOR definition error
 #endif
 
@@ -57,7 +55,7 @@
  *
  * -1=force-disable, +1=force-enable
  */
-static int enable_local_apic __initdata = 0;
+static int enable_local_apic __initdata;
 
 /* Local APIC timer verification ok */
 static int local_apic_timer_verify_ok;
@@ -101,6 +99,8 @@ static DEFINE_PER_CPU(struct clock_event_device, lapic_events);
 /* Local APIC was disabled by the BIOS and enabled by the kernel */
 static int enabled_via_apicbase;
 
+static unsigned long apic_phys;
+
 /*
  * Get the LAPIC version
  */
@@ -110,7 +110,7 @@ static inline int lapic_get_version(void)
 }
 
 /*
- * Check, if the APIC is integrated or a seperate chip
+ * Check, if the APIC is integrated or a separate chip
  */
 static inline int lapic_is_integrated(void)
 {
@@ -135,9 +135,9 @@ void apic_wait_icr_idle(void)
 		cpu_relax();
 }
 
-unsigned long safe_apic_wait_icr_idle(void)
+u32 safe_apic_wait_icr_idle(void)
 {
-	unsigned long send_status;
+	u32 send_status;
 	int timeout;
 
 	timeout = 0;
@@ -154,7 +154,7 @@ unsigned long safe_apic_wait_icr_idle(void)
 /**
  * enable_NMI_through_LVT0 - enable NMI through local vector table 0
  */
-void enable_NMI_through_LVT0 (void * dummy)
+void __cpuinit enable_NMI_through_LVT0(void)
 {
 	unsigned int v = APIC_DM_NMI;
 
@@ -379,8 +379,10 @@ void __init setup_boot_APIC_clock(void)
 	 */
 	if (local_apic_timer_disabled) {
 		/* No broadcast on UP ! */
-		if (num_possible_cpus() > 1)
+		if (num_possible_cpus() > 1) {
+			lapic_clockevent.mult = 1;
 			setup_APIC_timer();
+		}
 		return;
 	}
 
@@ -434,7 +436,7 @@ void __init setup_boot_APIC_clock(void)
 			       "with PM Timer: %ldms instead of 100ms\n",
 			       (long)res);
 			/* Correct the lapic counter value */
-			res = (((u64) delta ) * pm_100ms);
+			res = (((u64) delta) * pm_100ms);
 			do_div(res, deltapm);
 			printk(KERN_INFO "APIC delta adjusted to PM-Timer: "
 			       "%lu (%ld)\n", (unsigned long) res, delta);
@@ -472,6 +474,19 @@ void __init setup_boot_APIC_clock(void)
 
 	local_apic_timer_verify_ok = 1;
 
+	/*
+	 * Do a sanity check on the APIC calibration result
+	 */
+	if (calibration_result < (1000000 / HZ)) {
+		local_irq_enable();
+		printk(KERN_WARNING
+		       "APIC frequency too slow, disabling apic timer\n");
+		/* No broadcast on UP ! */
+		if (num_possible_cpus() > 1)
+			setup_APIC_timer();
+		return;
+	}
+
 	/* We trust the pm timer based calibration */
 	if (!pm_referenced) {
 		apic_printk(APIC_VERBOSE, "... verify APIC timer\n");
@@ -563,6 +578,9 @@ static void local_apic_timer_interrupt(void)
 		return;
 	}
 
+	/*
+	 * the NMI deadlock-detector uses this.
+	 */
 	per_cpu(irq_stat, cpu).apic_timer_irqs++;
 
 	evt->event_handler(evt);
@@ -576,8 +594,7 @@ static void local_apic_timer_interrupt(void)
  * [ if a single-CPU system runs an SMP kernel then we call the local
  *   interrupt as well. Thus we cannot inline the local irq ... ]
  */
-
-void fastcall smp_apic_timer_interrupt(struct pt_regs *regs)
+void smp_apic_timer_interrupt(struct pt_regs *regs)
 {
 	struct pt_regs *old_regs = set_irq_regs(regs);
 
@@ -616,9 +633,14 @@ int setup_profiling_timer(unsigned int multiplier)
  */
 void clear_local_APIC(void)
 {
-	int maxlvt = lapic_get_maxlvt();
-	unsigned long v;
+	int maxlvt;
+	u32 v;
+
+	/* APIC hasn't been mapped yet */
+	if (!apic_phys)
+		return;
 
+	maxlvt = lapic_get_maxlvt();
 	/*
 	 * Masking an LVT entry can trigger a local APIC error
 	 * if the vector is zero. Mask LVTERR first to prevent this.
@@ -976,7 +998,8 @@ void __cpuinit setup_local_APIC(void)
 		value |= APIC_LVT_LEVEL_TRIGGER;
 	apic_write_around(APIC_LVT1, value);
 
-	if (integrated && !esr_disable) {		/* !82489DX */
+	if (integrated && !esr_disable) {
+		/* !82489DX */
 		maxlvt = lapic_get_maxlvt();
 		if (maxlvt > 3)		/* Due to the Pentium erratum 3AP. */
 			apic_write(APIC_ESR, 0);
@@ -1020,7 +1043,7 @@ void __cpuinit setup_local_APIC(void)
 /*
  * Detect and initialize APIC
  */
-static int __init detect_init_APIC (void)
+static int __init detect_init_APIC(void)
 {
 	u32 h, l, features;
 
@@ -1077,7 +1100,7 @@ static int __init detect_init_APIC (void)
 		printk(KERN_WARNING "Could not enable APIC!\n");
 		return -1;
 	}
-	set_bit(X86_FEATURE_APIC, boot_cpu_data.x86_capability);
+	set_cpu_cap(&boot_cpu_data, X86_FEATURE_APIC);
 	mp_lapic_addr = APIC_DEFAULT_PHYS_BASE;
 
 	/* The BIOS may have set up the APIC at some other address */
@@ -1104,8 +1127,6 @@ no_apic:
  */
 void __init init_apic_mappings(void)
 {
-	unsigned long apic_phys;
-
 	/*
 	 * If no local APIC can be found then set up a fake all
 	 * zeroes page to simulate the local APIC and another
@@ -1164,10 +1185,10 @@ fake_ioapic_page:
  * This initializes the IO-APIC and APIC hardware if this is
  * a UP kernel.
  */
-int __init APIC_init_uniprocessor (void)
+int __init APIC_init_uniprocessor(void)
 {
 	if (enable_local_apic < 0)
-		clear_bit(X86_FEATURE_APIC, boot_cpu_data.x86_capability);
+		clear_cpu_cap(&boot_cpu_data, X86_FEATURE_APIC);
 
 	if (!smp_found_config && !cpu_has_apic)
 		return -1;
@@ -1179,7 +1200,7 @@ int __init APIC_init_uniprocessor (void)
 	    APIC_INTEGRATED(apic_version[boot_cpu_physical_apicid])) {
 		printk(KERN_ERR "BIOS bug, local APIC #%d not detected!...\n",
 		       boot_cpu_physical_apicid);
-		clear_bit(X86_FEATURE_APIC, boot_cpu_data.x86_capability);
+		clear_cpu_cap(&boot_cpu_data, X86_FEATURE_APIC);
 		return -1;
 	}
 
@@ -1209,50 +1230,6 @@ int __init APIC_init_uniprocessor (void)
 	return 0;
 }
 
-/*
- * APIC command line parameters
- */
-static int __init parse_lapic(char *arg)
-{
-	enable_local_apic = 1;
-	return 0;
-}
-early_param("lapic", parse_lapic);
-
-static int __init parse_nolapic(char *arg)
-{
-	enable_local_apic = -1;
-	clear_bit(X86_FEATURE_APIC, boot_cpu_data.x86_capability);
-	return 0;
-}
-early_param("nolapic", parse_nolapic);
-
-static int __init parse_disable_lapic_timer(char *arg)
-{
-	local_apic_timer_disabled = 1;
-	return 0;
-}
-early_param("nolapic_timer", parse_disable_lapic_timer);
-
-static int __init parse_lapic_timer_c2_ok(char *arg)
-{
-	local_apic_timer_c2_ok = 1;
-	return 0;
-}
-early_param("lapic_timer_c2_ok", parse_lapic_timer_c2_ok);
-
-static int __init apic_set_verbosity(char *str)
-{
-	if (strcmp("debug", str) == 0)
-		apic_verbosity = APIC_DEBUG;
-	else if (strcmp("verbose", str) == 0)
-		apic_verbosity = APIC_VERBOSE;
-	return 1;
-}
-
-__setup("apic=", apic_set_verbosity);
-
-
 /*
  * Local APIC interrupts
  */
@@ -1306,7 +1283,7 @@ void smp_error_interrupt(struct pt_regs *regs)
 	   6: Received illegal vector
 	   7: Illegal register address
 	*/
-	printk (KERN_DEBUG "APIC error on CPU%d: %02lx(%02lx)\n",
+	printk(KERN_DEBUG "APIC error on CPU%d: %02lx(%02lx)\n",
 		smp_processor_id(), v , v1);
 	irq_exit();
 }
@@ -1393,7 +1370,7 @@ void disconnect_bsp_APIC(int virt_wire_setup)
 			value = apic_read(APIC_LVT0);
 			value &= ~(APIC_MODE_MASK | APIC_SEND_PENDING |
 				APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR |
-				APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED );
+				APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED);
 			value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING;
 			value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_EXTINT);
 			apic_write_around(APIC_LVT0, value);
@@ -1565,3 +1542,46 @@ device_initcall(init_lapic_sysfs);
 static void apic_pm_activate(void) { }
 
 #endif	/* CONFIG_PM */
+
+/*
+ * APIC command line parameters
+ */
+static int __init parse_lapic(char *arg)
+{
+	enable_local_apic = 1;
+	return 0;
+}
+early_param("lapic", parse_lapic);
+
+static int __init parse_nolapic(char *arg)
+{
+	enable_local_apic = -1;
+	clear_cpu_cap(&boot_cpu_data, X86_FEATURE_APIC);
+	return 0;
+}
+early_param("nolapic", parse_nolapic);
+
+static int __init parse_disable_lapic_timer(char *arg)
+{
+	local_apic_timer_disabled = 1;
+	return 0;
+}
+early_param("nolapic_timer", parse_disable_lapic_timer);
+
+static int __init parse_lapic_timer_c2_ok(char *arg)
+{
+	local_apic_timer_c2_ok = 1;
+	return 0;
+}
+early_param("lapic_timer_c2_ok", parse_lapic_timer_c2_ok);
+
+static int __init apic_set_verbosity(char *str)
+{
+	if (strcmp("debug", str) == 0)
+		apic_verbosity = APIC_DEBUG;
+	else if (strcmp("verbose", str) == 0)
+		apic_verbosity = APIC_VERBOSE;
+	return 1;
+}
+__setup("apic=", apic_set_verbosity);
+

arch/x86/kernel/apm_32.c

@@ -227,6 +227,7 @@
 #include <linux/dmi.h>
 #include <linux/suspend.h>
 #include <linux/kthread.h>
+#include <linux/jiffies.h>
 
 #include <asm/system.h>
 #include <asm/uaccess.h>
@@ -235,8 +236,6 @@
 #include <asm/paravirt.h>
 #include <asm/reboot.h>
 
-#include "io_ports.h"
-
 #if defined(CONFIG_APM_DISPLAY_BLANK) && defined(CONFIG_VT)
 extern int (*console_blank_hook)(int);
 #endif
@@ -324,7 +323,7 @@ extern int (*console_blank_hook)(int);
 /*
  * Ignore suspend events for this amount of time after a resume
  */
-#define DEFAULT_BOUNCE_INTERVAL		(3 * HZ)
+#define DEFAULT_BOUNCE_INTERVAL	(3 * HZ)
 
 /*
  * Maximum number of events stored
@@ -336,7 +335,7 @@ extern int (*console_blank_hook)(int);
  */
 struct apm_user {
 	int		magic;
-	struct apm_user *	next;
+	struct apm_user *next;
 	unsigned int	suser: 1;
 	unsigned int	writer: 1;
 	unsigned int	reader: 1;
@@ -372,44 +371,44 @@ struct apm_user {
 static struct {
 	unsigned long	offset;
 	unsigned short	segment;
-}				apm_bios_entry;
-static int			clock_slowed;
-static int			idle_threshold __read_mostly = DEFAULT_IDLE_THRESHOLD;
-static int			idle_period __read_mostly = DEFAULT_IDLE_PERIOD;
-static int			set_pm_idle;
-static int			suspends_pending;
-static int			standbys_pending;
-static int			ignore_sys_suspend;
-static int			ignore_normal_resume;
-static int			bounce_interval __read_mostly = DEFAULT_BOUNCE_INTERVAL;
-
-static int			debug __read_mostly;
-static int			smp __read_mostly;
-static int			apm_disabled = -1;
+} apm_bios_entry;
+static int clock_slowed;
+static int idle_threshold __read_mostly = DEFAULT_IDLE_THRESHOLD;
+static int idle_period __read_mostly = DEFAULT_IDLE_PERIOD;
+static int set_pm_idle;
+static int suspends_pending;
+static int standbys_pending;
+static int ignore_sys_suspend;
+static int ignore_normal_resume;
+static int bounce_interval __read_mostly = DEFAULT_BOUNCE_INTERVAL;
+
+static int debug __read_mostly;
+static int smp __read_mostly;
+static int apm_disabled = -1;
 #ifdef CONFIG_SMP
-static int			power_off;
+static int power_off;
 #else
-static int			power_off = 1;
+static int power_off = 1;
 #endif
 #ifdef CONFIG_APM_REAL_MODE_POWER_OFF
-static int			realmode_power_off = 1;
+static int realmode_power_off = 1;
 #else
-static int			realmode_power_off;
+static int realmode_power_off;
 #endif
 #ifdef CONFIG_APM_ALLOW_INTS
-static int			allow_ints = 1;
+static int allow_ints = 1;
 #else
-static int			allow_ints;
+static int allow_ints;
 #endif
-static int			broken_psr;
+static int broken_psr;
 
 static DECLARE_WAIT_QUEUE_HEAD(apm_waitqueue);
 static DECLARE_WAIT_QUEUE_HEAD(apm_suspend_waitqueue);
-static struct apm_user *	user_list;
+static struct apm_user *user_list;
 static DEFINE_SPINLOCK(user_list_lock);
-static const struct desc_struct	bad_bios_desc = { 0, 0x00409200 };
+static const struct desc_struct	bad_bios_desc = { { { 0, 0x00409200 } } };
 
-static const char		driver_version[] = "1.16ac";	/* no spaces */
+static const char driver_version[] = "1.16ac";	/* no spaces */
 
 static struct task_struct *kapmd_task;
 
@@ -417,7 +416,7 @@ static struct task_struct *kapmd_task;
  *	APM event names taken from the APM 1.2 specification. These are
  *	the message codes that the BIOS uses to tell us about events
  */
-static const char *	const apm_event_name[] = {
+static const char * const apm_event_name[] = {
 	"system standby",
 	"system suspend",
 	"normal resume",
@@ -435,14 +434,14 @@ static const char *	const apm_event_name[] = {
 
 typedef struct lookup_t {
 	int	key;
-	char *	msg;
+	char 	*msg;
 } lookup_t;
 
 /*
  *	The BIOS returns a set of standard error codes in AX when the
  *	carry flag is set.
  */
- 
+
 static const lookup_t error_table[] = {
 /* N/A	{ APM_SUCCESS,		"Operation succeeded" }, */
 	{ APM_DISABLED,		"Power management disabled" },
@@ -472,24 +471,25 @@ static const lookup_t error_table[] = {
  *	Write a meaningful log entry to the kernel log in the event of
  *	an APM error.
  */
- 
+
 static void apm_error(char *str, int err)
 {
-	int	i;
+	int i;
 
 	for (i = 0; i < ERROR_COUNT; i++)
-		if (error_table[i].key == err) break;
+		if (error_table[i].key == err)
+			break;
 	if (i < ERROR_COUNT)
 		printk(KERN_NOTICE "apm: %s: %s\n", str, error_table[i].msg);
 	else
 		printk(KERN_NOTICE "apm: %s: unknown error code %#2.2x\n",
-			str, err);
+		       str, err);
 }
 
 /*
  * Lock APM functionality to physical CPU 0
  */
- 
+
 #ifdef CONFIG_SMP
 
 static cpumask_t apm_save_cpus(void)
@@ -511,7 +511,7 @@ static inline void apm_restore_cpus(cpumask_t mask)
 /*
  *	No CPU lockdown needed on a uniprocessor
  */
- 
+
 #define apm_save_cpus()		(current->cpus_allowed)
 #define apm_restore_cpus(x)	(void)(x)
 
@@ -590,7 +590,7 @@ static inline void apm_irq_restore(unsigned long flags)
  *	code is returned in AH (bits 8-15 of eax) and this function
  *	returns non-zero.
  */
- 
+
 static u8 apm_bios_call(u32 func, u32 ebx_in, u32 ecx_in,
 	u32 *eax, u32 *ebx, u32 *ecx, u32 *edx, u32 *esi)
 {
@@ -602,7 +602,7 @@ static u8 apm_bios_call(u32 func, u32 ebx_in, u32 ecx_in,
 	struct desc_struct	*gdt;
 
 	cpus = apm_save_cpus();
-	
+
 	cpu = get_cpu();
 	gdt = get_cpu_gdt_table(cpu);
 	save_desc_40 = gdt[0x40 / 8];
@@ -616,7 +616,7 @@ static u8 apm_bios_call(u32 func, u32 ebx_in, u32 ecx_in,
 	gdt[0x40 / 8] = save_desc_40;
 	put_cpu();
 	apm_restore_cpus(cpus);
-	
+
 	return *eax & 0xff;
 }
 
@@ -645,7 +645,7 @@ static u8 apm_bios_call_simple(u32 func, u32 ebx_in, u32 ecx_in, u32 *eax)
 	struct desc_struct	*gdt;
 
 	cpus = apm_save_cpus();
-	
+
 	cpu = get_cpu();
 	gdt = get_cpu_gdt_table(cpu);
 	save_desc_40 = gdt[0x40 / 8];
@@ -680,7 +680,7 @@ static u8 apm_bios_call_simple(u32 func, u32 ebx_in, u32 ecx_in, u32 *eax)
 
 static int apm_driver_version(u_short *val)
 {
-	u32	eax;
+	u32 eax;
 
 	if (apm_bios_call_simple(APM_FUNC_VERSION, 0, *val, &eax))
 		return (eax >> 8) & 0xff;
@@ -704,16 +704,16 @@ static int apm_driver_version(u_short *val)
  *	that APM 1.2 is in use. If no messges are pending the value 0x80
  *	is returned (No power management events pending).
  */
- 
+
 static int apm_get_event(apm_event_t *event, apm_eventinfo_t *info)
 {
-	u32	eax;
-	u32	ebx;
-	u32	ecx;
-	u32	dummy;
+	u32 eax;
+	u32 ebx;
+	u32 ecx;
+	u32 dummy;
 
 	if (apm_bios_call(APM_FUNC_GET_EVENT, 0, 0, &eax, &ebx, &ecx,
-			&dummy, &dummy))
+			  &dummy, &dummy))
 		return (eax >> 8) & 0xff;
 	*event = ebx;
 	if (apm_info.connection_version < 0x0102)
@@ -736,10 +736,10 @@ static int apm_get_event(apm_event_t *event, apm_eventinfo_t *info)
  *	The state holds the state to transition to, which may in fact
  *	be an acceptance of a BIOS requested state change.
  */
- 
+
 static int set_power_state(u_short what, u_short state)
 {
-	u32	eax;
+	u32 eax;
 
 	if (apm_bios_call_simple(APM_FUNC_SET_STATE, what, state, &eax))
 		return (eax >> 8) & 0xff;
@@ -752,7 +752,7 @@ static int set_power_state(u_short what, u_short state)
  *
  *	Transition the entire system into a new APM power state.
  */
- 
+
 static int set_system_power_state(u_short state)
 {
 	return set_power_state(APM_DEVICE_ALL, state);
@@ -766,13 +766,13 @@ static int set_system_power_state(u_short state)
  *	to handle the idle request. On a success the function returns 1
  *	if the BIOS did clock slowing or 0 otherwise.
  */
- 
+
 static int apm_do_idle(void)
 {
-	u32	eax;
-	u8	ret = 0;
-	int	idled = 0;
-	int	polling;
+	u32 eax;
+	u8 ret = 0;
+	int idled = 0;
+	int polling;
 
 	polling = !!(current_thread_info()->status & TS_POLLING);
 	if (polling) {
@@ -799,10 +799,9 @@ static int apm_do_idle(void)
 		/* This always fails on some SMP boards running UP kernels.
 		 * Only report the failure the first 5 times.
 		 */
-		if (++t < 5)
-		{
+		if (++t < 5) {
 			printk(KERN_DEBUG "apm_do_idle failed (%d)\n",
-					(eax >> 8) & 0xff);
+			       (eax >> 8) & 0xff);
 			t = jiffies;
 		}
 		return -1;
@@ -814,15 +813,15 @@ static int apm_do_idle(void)
 /**
  *	apm_do_busy	-	inform the BIOS the CPU is busy
  *
- *	Request that the BIOS brings the CPU back to full performance. 
+ *	Request that the BIOS brings the CPU back to full performance.
  */
- 
+
 static void apm_do_busy(void)
 {
-	u32	dummy;
+	u32 dummy;
 
 	if (clock_slowed || ALWAYS_CALL_BUSY) {
-		(void) apm_bios_call_simple(APM_FUNC_BUSY, 0, 0, &dummy);
+		(void)apm_bios_call_simple(APM_FUNC_BUSY, 0, 0, &dummy);
 		clock_slowed = 0;
 	}
 }
@@ -833,15 +832,15 @@ static void apm_do_busy(void)
  * power management - we probably want
  * to conserve power.
  */
-#define IDLE_CALC_LIMIT   (HZ * 100)
-#define IDLE_LEAKY_MAX    16
+#define IDLE_CALC_LIMIT	(HZ * 100)
+#define IDLE_LEAKY_MAX	16
 
 static void (*original_pm_idle)(void) __read_mostly;
 
 /**
  * apm_cpu_idle		-	cpu idling for APM capable Linux
  *
- * This is the idling function the kernel executes when APM is available. It 
+ * This is the idling function the kernel executes when APM is available. It
  * tries to do BIOS powermanagement based on the average system idle time.
  * Furthermore it calls the system default idle routine.
  */
@@ -882,7 +881,8 @@ recalc:
 
 			t = jiffies;
 			switch (apm_do_idle()) {
-			case 0: apm_idle_done = 1;
+			case 0:
+				apm_idle_done = 1;
 				if (t != jiffies) {
 					if (bucket) {
 						bucket = IDLE_LEAKY_MAX;
@@ -893,7 +893,8 @@ recalc:
 					continue;
 				}
 				break;
-			case 1: apm_idle_done = 1;
+			case 1:
+				apm_idle_done = 1;
 				break;
 			default: /* BIOS refused */
 				break;
@@ -921,10 +922,10 @@ recalc:
  *	the SMP call on CPU0 as some systems will only honour this call
  *	on their first cpu.
  */
- 
+
 static void apm_power_off(void)
 {
-	unsigned char	po_bios_call[] = {
+	unsigned char po_bios_call[] = {
 		0xb8, 0x00, 0x10,	/* movw  $0x1000,ax  */
 		0x8e, 0xd0,		/* movw  ax,ss       */
 		0xbc, 0x00, 0xf0,	/* movw  $0xf000,sp  */
@@ -935,13 +936,12 @@ static void apm_power_off(void)
 	};
 
 	/* Some bioses don't like being called from CPU != 0 */
-	if (apm_info.realmode_power_off)
-	{
+	if (apm_info.realmode_power_off) {
 		(void)apm_save_cpus();
 		machine_real_restart(po_bios_call, sizeof(po_bios_call));
+	} else {
+		(void)set_system_power_state(APM_STATE_OFF);
 	}
-	else
-		(void) set_system_power_state(APM_STATE_OFF);
 }
 
 #ifdef CONFIG_APM_DO_ENABLE
@@ -950,17 +950,17 @@ static void apm_power_off(void)
  *	apm_enable_power_management - enable BIOS APM power management
  *	@enable: enable yes/no
  *
- *	Enable or disable the APM BIOS power services. 
+ *	Enable or disable the APM BIOS power services.
  */
- 
+
 static int apm_enable_power_management(int enable)
 {
-	u32	eax;
+	u32 eax;
 
 	if ((enable == 0) && (apm_info.bios.flags & APM_BIOS_DISENGAGED))
 		return APM_NOT_ENGAGED;
 	if (apm_bios_call_simple(APM_FUNC_ENABLE_PM, APM_DEVICE_BALL,
-			enable, &eax))
+				 enable, &eax))
 		return (eax >> 8) & 0xff;
 	if (enable)
 		apm_info.bios.flags &= ~APM_BIOS_DISABLED;
@@ -983,19 +983,19 @@ static int apm_enable_power_management(int enable)
  *	if reported is a lifetime in secodnds/minutes at current powwer
  *	consumption.
  */
- 
+
 static int apm_get_power_status(u_short *status, u_short *bat, u_short *life)
 {
-	u32	eax;
-	u32	ebx;
-	u32	ecx;
-	u32	edx;
-	u32	dummy;
+	u32 eax;
+	u32 ebx;
+	u32 ecx;
+	u32 edx;
+	u32 dummy;
 
 	if (apm_info.get_power_status_broken)
 		return APM_32_UNSUPPORTED;
 	if (apm_bios_call(APM_FUNC_GET_STATUS, APM_DEVICE_ALL, 0,
-			&eax, &ebx, &ecx, &edx, &dummy))
+			  &eax, &ebx, &ecx, &edx, &dummy))
 		return (eax >> 8) & 0xff;
 	*status = ebx;
 	*bat = ecx;
@@ -1011,11 +1011,11 @@ static int apm_get_power_status(u_short *status, u_short *bat, u_short *life)
 static int apm_get_battery_status(u_short which, u_short *status,
 				  u_short *bat, u_short *life, u_short *nbat)
 {
-	u32	eax;
-	u32	ebx;
-	u32	ecx;
-	u32	edx;
-	u32	esi;
+	u32 eax;
+	u32 ebx;
+	u32 ecx;
+	u32 edx;
+	u32 esi;
 
 	if (apm_info.connection_version < 0x0102) {
 		/* pretend we only have one battery. */
@@ -1026,7 +1026,7 @@ static int apm_get_battery_status(u_short which, u_short *status,
 	}
 
 	if (apm_bios_call(APM_FUNC_GET_STATUS, (0x8000 | (which)), 0, &eax,
-			&ebx, &ecx, &edx, &esi))
+			  &ebx, &ecx, &edx, &esi))
 		return (eax >> 8) & 0xff;
 	*status = ebx;
 	*bat = ecx;
@@ -1044,10 +1044,10 @@ static int apm_get_battery_status(u_short which, u_short *status,
  *	Activate or deactive power management on either a specific device
  *	or the entire system (%APM_DEVICE_ALL).
  */
- 
+
 static int apm_engage_power_management(u_short device, int enable)
 {
-	u32	eax;
+	u32 eax;
 
 	if ((enable == 0) && (device == APM_DEVICE_ALL)
 	    && (apm_info.bios.flags & APM_BIOS_DISABLED))
@@ -1074,7 +1074,7 @@ static int apm_engage_power_management(u_short device, int enable)
  *	all video devices. Typically the BIOS will do laptop backlight and
  *	monitor powerdown for us.
  */
- 
+
 static int apm_console_blank(int blank)
 {
 	int error = APM_NOT_ENGAGED; /* silence gcc */
@@ -1126,7 +1126,7 @@ static apm_event_t get_queued_event(struct apm_user *as)
 
 static void queue_event(apm_event_t event, struct apm_user *sender)
 {
-	struct apm_user *	as;
+	struct apm_user *as;
 
 	spin_lock(&user_list_lock);
 	if (user_list == NULL)
@@ -1174,11 +1174,11 @@ static void reinit_timer(void)
 
 	spin_lock_irqsave(&i8253_lock, flags);
 	/* set the clock to HZ */
-	outb_p(0x34, PIT_MODE);		/* binary, mode 2, LSB/MSB, ch 0 */
+	outb_pit(0x34, PIT_MODE);		/* binary, mode 2, LSB/MSB, ch 0 */
 	udelay(10);
-	outb_p(LATCH & 0xff, PIT_CH0);	/* LSB */
+	outb_pit(LATCH & 0xff, PIT_CH0);	/* LSB */
 	udelay(10);
-	outb(LATCH >> 8, PIT_CH0);	/* MSB */
+	outb_pit(LATCH >> 8, PIT_CH0);	/* MSB */
 	udelay(10);
 	spin_unlock_irqrestore(&i8253_lock, flags);
 #endif
@@ -1186,7 +1186,7 @@ static void reinit_timer(void)
 
 static int suspend(int vetoable)
 {
-	int		err;
+	int err;
 	struct apm_user	*as;
 
 	if (pm_send_all(PM_SUSPEND, (void *)3)) {
@@ -1239,7 +1239,7 @@ static int suspend(int vetoable)
 
 static void standby(void)
 {
-	int	err;
+	int err;
 
 	local_irq_disable();
 	device_power_down(PMSG_SUSPEND);
@@ -1256,8 +1256,8 @@ static void standby(void)
 
 static apm_event_t get_event(void)
 {
-	int		error;
-	apm_event_t	event = APM_NO_EVENTS; /* silence gcc */
+	int error;
+	apm_event_t event = APM_NO_EVENTS; /* silence gcc */
 	apm_eventinfo_t	info;
 
 	static int notified;
@@ -1275,9 +1275,9 @@ static apm_event_t get_event(void)
 
 static void check_events(void)
 {
-	apm_event_t		event;
-	static unsigned long	last_resume;
-	static int		ignore_bounce;
+	apm_event_t event;
+	static unsigned long last_resume;
+	static int ignore_bounce;
 
 	while ((event = get_event()) != 0) {
 		if (debug) {
@@ -1289,7 +1289,7 @@ static void check_events(void)
 				       "event 0x%02x\n", event);
 		}
 		if (ignore_bounce
-		    && ((jiffies - last_resume) > bounce_interval))
+		    && (time_after(jiffies, last_resume + bounce_interval)))
 			ignore_bounce = 0;
 
 		switch (event) {
@@ -1357,7 +1357,7 @@ static void check_events(void)
 			/*
 			 * We are not allowed to reject a critical suspend.
 			 */
-			(void) suspend(0);
+			(void)suspend(0);
 			break;
 		}
 	}
@@ -1365,12 +1365,12 @@ static void check_events(void)
 
 static void apm_event_handler(void)
 {
-	static int	pending_count = 4;
-	int		err;
+	static int pending_count = 4;
+	int err;
 
 	if ((standbys_pending > 0) || (suspends_pending > 0)) {
 		if ((apm_info.connection_version > 0x100) &&
-				(pending_count-- <= 0)) {
+		    (pending_count-- <= 0)) {
 			pending_count = 4;
 			if (debug)
 				printk(KERN_DEBUG "apm: setting state busy\n");
@@ -1418,9 +1418,9 @@ static int check_apm_user(struct apm_user *as, const char *func)
 
 static ssize_t do_read(struct file *fp, char __user *buf, size_t count, loff_t *ppos)
 {
-	struct apm_user *	as;
-	int			i;
-	apm_event_t		event;
+	struct apm_user *as;
+	int i;
+	apm_event_t event;
 
 	as = fp->private_data;
 	if (check_apm_user(as, "read"))
@@ -1459,9 +1459,9 @@ static ssize_t do_read(struct file *fp, char __user *buf, size_t count, loff_t *
 	return 0;
 }
 
-static unsigned int do_poll(struct file *fp, poll_table * wait)
+static unsigned int do_poll(struct file *fp, poll_table *wait)
 {
-	struct apm_user * as;
+	struct apm_user *as;
 
 	as = fp->private_data;
 	if (check_apm_user(as, "poll"))
@@ -1472,10 +1472,10 @@ static unsigned int do_poll(struct file *fp, poll_table * wait)
 	return 0;
 }
 
-static int do_ioctl(struct inode * inode, struct file *filp,
+static int do_ioctl(struct inode *inode, struct file *filp,
 		    u_int cmd, u_long arg)
 {
-	struct apm_user *	as;
+	struct apm_user *as;
 
 	as = filp->private_data;
 	if (check_apm_user(as, "ioctl"))
@@ -1515,9 +1515,9 @@ static int do_ioctl(struct inode * inode, struct file *filp,
 	return 0;
 }
 
-static int do_release(struct inode * inode, struct file * filp)
+static int do_release(struct inode *inode, struct file *filp)
 {
-	struct apm_user *	as;
+	struct apm_user *as;
 
 	as = filp->private_data;
 	if (check_apm_user(as, "release"))
@@ -1533,11 +1533,11 @@ static int do_release(struct inode * inode, struct file * filp)
 		if (suspends_pending <= 0)
 			(void) suspend(1);
 	}
-  	spin_lock(&user_list_lock);
+	spin_lock(&user_list_lock);
 	if (user_list == as)
 		user_list = as->next;
 	else {
-		struct apm_user *	as1;
+		struct apm_user *as1;
 
 		for (as1 = user_list;
 		     (as1 != NULL) && (as1->next != as);
@@ -1553,9 +1553,9 @@ static int do_release(struct inode * inode, struct file * filp)
 	return 0;
 }
 
-static int do_open(struct inode * inode, struct file * filp)
+static int do_open(struct inode *inode, struct file *filp)
 {
-	struct apm_user *	as;
+	struct apm_user *as;
 
 	as = kmalloc(sizeof(*as), GFP_KERNEL);
 	if (as == NULL) {
@@ -1569,7 +1569,7 @@ static int do_open(struct inode * inode, struct file * filp)
 	as->suspends_read = as->standbys_read = 0;
 	/*
 	 * XXX - this is a tiny bit broken, when we consider BSD
-         * process accounting. If the device is opened by root, we
+	 * process accounting. If the device is opened by root, we
 	 * instantly flag that we used superuser privs. Who knows,
 	 * we might close the device immediately without doing a
 	 * privileged operation -- cevans
@@ -1652,16 +1652,16 @@ static int proc_apm_show(struct seq_file *m, void *v)
 	   8) min = minutes; sec = seconds */
 
 	seq_printf(m, "%s %d.%d 0x%02x 0x%02x 0x%02x 0x%02x %d%% %d %s\n",
-		     driver_version,
-		     (apm_info.bios.version >> 8) & 0xff,
-		     apm_info.bios.version & 0xff,
-		     apm_info.bios.flags,
-		     ac_line_status,
-		     battery_status,
-		     battery_flag,
-		     percentage,
-		     time_units,
-		     units);
+		   driver_version,
+		   (apm_info.bios.version >> 8) & 0xff,
+		   apm_info.bios.version & 0xff,
+		   apm_info.bios.flags,
+		   ac_line_status,
+		   battery_status,
+		   battery_flag,
+		   percentage,
+		   time_units,
+		   units);
 	return 0;
 }
 
@@ -1684,8 +1684,8 @@ static int apm(void *unused)
 	unsigned short	cx;
 	unsigned short	dx;
 	int		error;
-	char *		power_stat;
-	char *		bat_stat;
+	char 		*power_stat;
+	char 		*bat_stat;
 
 #ifdef CONFIG_SMP
 	/* 2002/08/01 - WT
@@ -1744,23 +1744,41 @@ static int apm(void *unused)
 		}
 	}
 
-	if (debug && (num_online_cpus() == 1 || smp )) {
+	if (debug && (num_online_cpus() == 1 || smp)) {
 		error = apm_get_power_status(&bx, &cx, &dx);
 		if (error)
 			printk(KERN_INFO "apm: power status not available\n");
 		else {
 			switch ((bx >> 8) & 0xff) {
-			case 0: power_stat = "off line"; break;
-			case 1: power_stat = "on line"; break;
-			case 2: power_stat = "on backup power"; break;
-			default: power_stat = "unknown"; break;
+			case 0:
+				power_stat = "off line";
+				break;
+			case 1:
+				power_stat = "on line";
+				break;
+			case 2:
+				power_stat = "on backup power";
+				break;
+			default:
+				power_stat = "unknown";
+				break;
 			}
 			switch (bx & 0xff) {
-			case 0: bat_stat = "high"; break;
-			case 1: bat_stat = "low"; break;
-			case 2: bat_stat = "critical"; break;
-			case 3: bat_stat = "charging"; break;
-			default: bat_stat = "unknown"; break;
+			case 0:
+				bat_stat = "high";
+				break;
+			case 1:
+				bat_stat = "low";
+				break;
+			case 2:
+				bat_stat = "critical";
+				break;
+			case 3:
+				bat_stat = "charging";
+				break;
+			default:
+				bat_stat = "unknown";
+				break;
 			}
 			printk(KERN_INFO
 			       "apm: AC %s, battery status %s, battery life ",
@@ -1777,8 +1795,8 @@ static int apm(void *unused)
 					printk("unknown\n");
 				else
 					printk("%d %s\n", dx & 0x7fff,
-						(dx & 0x8000) ?
-						"minutes" : "seconds");
+					       (dx & 0x8000) ?
+					       "minutes" : "seconds");
 			}
 		}
 	}
@@ -1803,7 +1821,7 @@ static int apm(void *unused)
 #ifndef MODULE
 static int __init apm_setup(char *str)
 {
-	int	invert;
+	int invert;
 
 	while ((str != NULL) && (*str != '\0')) {
 		if (strncmp(str, "off", 3) == 0)
@@ -1828,14 +1846,13 @@ static int __init apm_setup(char *str)
 		if ((strncmp(str, "power-off", 9) == 0) ||
 		    (strncmp(str, "power_off", 9) == 0))
 			power_off = !invert;
-		if (strncmp(str, "smp", 3) == 0)
-		{
+		if (strncmp(str, "smp", 3) == 0) {
 			smp = !invert;
 			idle_threshold = 100;
 		}
 		if ((strncmp(str, "allow-ints", 10) == 0) ||
 		    (strncmp(str, "allow_ints", 10) == 0))
- 			apm_info.allow_ints = !invert;
+			apm_info.allow_ints = !invert;
 		if ((strncmp(str, "broken-psr", 10) == 0) ||
 		    (strncmp(str, "broken_psr", 10) == 0))
 			apm_info.get_power_status_broken = !invert;
@@ -1881,7 +1898,8 @@ static int __init print_if_true(const struct dmi_system_id *d)
  */
 static int __init broken_ps2_resume(const struct dmi_system_id *d)
 {
-	printk(KERN_INFO "%s machine detected. Mousepad Resume Bug workaround hopefully not needed.\n", d->ident);
+	printk(KERN_INFO "%s machine detected. Mousepad Resume Bug "
+	       "workaround hopefully not needed.\n", d->ident);
 	return 0;
 }
 
@@ -1890,7 +1908,8 @@ static int __init set_realmode_power_off(const struct dmi_system_id *d)
 {
 	if (apm_info.realmode_power_off == 0) {
 		apm_info.realmode_power_off = 1;
-		printk(KERN_INFO "%s bios detected. Using realmode poweroff only.\n", d->ident);
+		printk(KERN_INFO "%s bios detected. "
+		       "Using realmode poweroff only.\n", d->ident);
 	}
 	return 0;
 }
@@ -1900,7 +1919,8 @@ static int __init set_apm_ints(const struct dmi_system_id *d)
 {
 	if (apm_info.allow_ints == 0) {
 		apm_info.allow_ints = 1;
-		printk(KERN_INFO "%s machine detected. Enabling interrupts during APM calls.\n", d->ident);
+		printk(KERN_INFO "%s machine detected. "
+		       "Enabling interrupts during APM calls.\n", d->ident);
 	}
 	return 0;
 }
@@ -1910,7 +1930,8 @@ static int __init apm_is_horked(const struct dmi_system_id *d)
 {
 	if (apm_info.disabled == 0) {
 		apm_info.disabled = 1;
-		printk(KERN_INFO "%s machine detected. Disabling APM.\n", d->ident);
+		printk(KERN_INFO "%s machine detected. "
+		       "Disabling APM.\n", d->ident);
 	}
 	return 0;
 }
@@ -1919,7 +1940,8 @@ static int __init apm_is_horked_d850md(const struct dmi_system_id *d)
 {
 	if (apm_info.disabled == 0) {
 		apm_info.disabled = 1;
-		printk(KERN_INFO "%s machine detected. Disabling APM.\n", d->ident);
+		printk(KERN_INFO "%s machine detected. "
+		       "Disabling APM.\n", d->ident);
 		printk(KERN_INFO "This bug is fixed in bios P15 which is available for \n");
 		printk(KERN_INFO "download from support.intel.com \n");
 	}
@@ -1931,7 +1953,8 @@ static int __init apm_likes_to_melt(const struct dmi_system_id *d)
 {
 	if (apm_info.forbid_idle == 0) {
 		apm_info.forbid_idle = 1;
-		printk(KERN_INFO "%s machine detected. Disabling APM idle calls.\n", d->ident);
+		printk(KERN_INFO "%s machine detected. "
+		       "Disabling APM idle calls.\n", d->ident);
 	}
 	return 0;
 }
@@ -1954,7 +1977,8 @@ static int __init apm_likes_to_melt(const struct dmi_system_id *d)
 static int __init broken_apm_power(const struct dmi_system_id *d)
 {
 	apm_info.get_power_status_broken = 1;
-	printk(KERN_WARNING "BIOS strings suggest APM bugs, disabling power status reporting.\n");
+	printk(KERN_WARNING "BIOS strings suggest APM bugs, "
+	       "disabling power status reporting.\n");
 	return 0;
 }
 
@@ -1965,7 +1989,8 @@ static int __init broken_apm_power(const struct dmi_system_id *d)
 static int __init swab_apm_power_in_minutes(const struct dmi_system_id *d)
 {
 	apm_info.get_power_status_swabinminutes = 1;
-	printk(KERN_WARNING "BIOS strings suggest APM reports battery life in minutes and wrong byte order.\n");
+	printk(KERN_WARNING "BIOS strings suggest APM reports battery life "
+	       "in minutes and wrong byte order.\n");
 	return 0;
 }
 
@@ -1990,8 +2015,8 @@ static struct dmi_system_id __initdata apm_dmi_table[] = {
 		apm_is_horked, "Dell Inspiron 2500",
 		{	DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer Corporation"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 2500"),
-			DMI_MATCH(DMI_BIOS_VENDOR,"Phoenix Technologies LTD"),
-			DMI_MATCH(DMI_BIOS_VERSION,"A11"), },
+			DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"),
+			DMI_MATCH(DMI_BIOS_VERSION, "A11"), },
 	},
 	{	/* Allow interrupts during suspend on Dell Inspiron laptops*/
 		set_apm_ints, "Dell Inspiron", {
@@ -2014,15 +2039,15 @@ static struct dmi_system_id __initdata apm_dmi_table[] = {
 		apm_is_horked, "Dell Dimension 4100",
 		{	DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer Corporation"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "XPS-Z"),
-			DMI_MATCH(DMI_BIOS_VENDOR,"Intel Corp."),
-			DMI_MATCH(DMI_BIOS_VERSION,"A11"), },
+			DMI_MATCH(DMI_BIOS_VENDOR, "Intel Corp."),
+			DMI_MATCH(DMI_BIOS_VERSION, "A11"), },
 	},
 	{	/* Allow interrupts during suspend on Compaq Laptops*/
 		set_apm_ints, "Compaq 12XL125",
 		{	DMI_MATCH(DMI_SYS_VENDOR, "Compaq"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "Compaq PC"),
 			DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"),
-			DMI_MATCH(DMI_BIOS_VERSION,"4.06"), },
+			DMI_MATCH(DMI_BIOS_VERSION, "4.06"), },
 	},
 	{	/* Allow interrupts during APM or the clock goes slow */
 		set_apm_ints, "ASUSTeK",
@@ -2064,15 +2089,15 @@ static struct dmi_system_id __initdata apm_dmi_table[] = {
 		apm_is_horked, "Sharp PC-PJ/AX",
 		{	DMI_MATCH(DMI_SYS_VENDOR, "SHARP"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "PC-PJ/AX"),
-			DMI_MATCH(DMI_BIOS_VENDOR,"SystemSoft"),
-			DMI_MATCH(DMI_BIOS_VERSION,"Version R2.08"), },
+			DMI_MATCH(DMI_BIOS_VENDOR, "SystemSoft"),
+			DMI_MATCH(DMI_BIOS_VERSION, "Version R2.08"), },
 	},
 	{	/* APM crashes */
 		apm_is_horked, "Dell Inspiron 2500",
 		{	DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer Corporation"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 2500"),
-			DMI_MATCH(DMI_BIOS_VENDOR,"Phoenix Technologies LTD"),
-			DMI_MATCH(DMI_BIOS_VERSION,"A11"), },
+			DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"),
+			DMI_MATCH(DMI_BIOS_VERSION, "A11"), },
 	},
 	{	/* APM idle hangs */
 		apm_likes_to_melt, "Jabil AMD",
@@ -2203,11 +2228,11 @@ static int __init apm_init(void)
 		return -ENODEV;
 	}
 	printk(KERN_INFO
-		"apm: BIOS version %d.%d Flags 0x%02x (Driver version %s)\n",
-		((apm_info.bios.version >> 8) & 0xff),
-		(apm_info.bios.version & 0xff),
-		apm_info.bios.flags,
-		driver_version);
+	       "apm: BIOS version %d.%d Flags 0x%02x (Driver version %s)\n",
+	       ((apm_info.bios.version >> 8) & 0xff),
+	       (apm_info.bios.version & 0xff),
+	       apm_info.bios.flags,
+	       driver_version);
 	if ((apm_info.bios.flags & APM_32_BIT_SUPPORT) == 0) {
 		printk(KERN_INFO "apm: no 32 bit BIOS support\n");
 		return -ENODEV;
@@ -2312,9 +2337,9 @@ static int __init apm_init(void)
 	}
 	wake_up_process(kapmd_task);
 
-	if (num_online_cpus() > 1 && !smp ) {
+	if (num_online_cpus() > 1 && !smp) {
 		printk(KERN_NOTICE
-		   "apm: disabled - APM is not SMP safe (power off active).\n");
+		       "apm: disabled - APM is not SMP safe (power off active).\n");
 		return 0;
 	}
 
@@ -2339,7 +2364,7 @@ static int __init apm_init(void)
 
 static void __exit apm_exit(void)
 {
-	int	error;
+	int error;
 
 	if (set_pm_idle) {
 		pm_idle = original_pm_idle;

arch/x86/kernel/asm-offsets_32.c

@@ -38,15 +38,15 @@ void foo(void);
 
 void foo(void)
 {
-	OFFSET(SIGCONTEXT_eax, sigcontext, eax);
-	OFFSET(SIGCONTEXT_ebx, sigcontext, ebx);
-	OFFSET(SIGCONTEXT_ecx, sigcontext, ecx);
-	OFFSET(SIGCONTEXT_edx, sigcontext, edx);
-	OFFSET(SIGCONTEXT_esi, sigcontext, esi);
-	OFFSET(SIGCONTEXT_edi, sigcontext, edi);
-	OFFSET(SIGCONTEXT_ebp, sigcontext, ebp);
-	OFFSET(SIGCONTEXT_esp, sigcontext, esp);
-	OFFSET(SIGCONTEXT_eip, sigcontext, eip);
+	OFFSET(IA32_SIGCONTEXT_ax, sigcontext, ax);
+	OFFSET(IA32_SIGCONTEXT_bx, sigcontext, bx);
+	OFFSET(IA32_SIGCONTEXT_cx, sigcontext, cx);
+	OFFSET(IA32_SIGCONTEXT_dx, sigcontext, dx);
+	OFFSET(IA32_SIGCONTEXT_si, sigcontext, si);
+	OFFSET(IA32_SIGCONTEXT_di, sigcontext, di);
+	OFFSET(IA32_SIGCONTEXT_bp, sigcontext, bp);
+	OFFSET(IA32_SIGCONTEXT_sp, sigcontext, sp);
+	OFFSET(IA32_SIGCONTEXT_ip, sigcontext, ip);
 	BLANK();
 
 	OFFSET(CPUINFO_x86, cpuinfo_x86, x86);
@@ -70,39 +70,38 @@ void foo(void)
 	OFFSET(TI_cpu, thread_info, cpu);
 	BLANK();
 
-	OFFSET(GDS_size, Xgt_desc_struct, size);
-	OFFSET(GDS_address, Xgt_desc_struct, address);
-	OFFSET(GDS_pad, Xgt_desc_struct, pad);
+	OFFSET(GDS_size, desc_ptr, size);
+	OFFSET(GDS_address, desc_ptr, address);
 	BLANK();
 
-	OFFSET(PT_EBX, pt_regs, ebx);
-	OFFSET(PT_ECX, pt_regs, ecx);
-	OFFSET(PT_EDX, pt_regs, edx);
-	OFFSET(PT_ESI, pt_regs, esi);
-	OFFSET(PT_EDI, pt_regs, edi);
-	OFFSET(PT_EBP, pt_regs, ebp);
-	OFFSET(PT_EAX, pt_regs, eax);
-	OFFSET(PT_DS,  pt_regs, xds);
-	OFFSET(PT_ES,  pt_regs, xes);
-	OFFSET(PT_FS,  pt_regs, xfs);
-	OFFSET(PT_ORIG_EAX, pt_regs, orig_eax);
-	OFFSET(PT_EIP, pt_regs, eip);
-	OFFSET(PT_CS,  pt_regs, xcs);
-	OFFSET(PT_EFLAGS, pt_regs, eflags);
-	OFFSET(PT_OLDESP, pt_regs, esp);
-	OFFSET(PT_OLDSS,  pt_regs, xss);
+	OFFSET(PT_EBX, pt_regs, bx);
+	OFFSET(PT_ECX, pt_regs, cx);
+	OFFSET(PT_EDX, pt_regs, dx);
+	OFFSET(PT_ESI, pt_regs, si);
+	OFFSET(PT_EDI, pt_regs, di);
+	OFFSET(PT_EBP, pt_regs, bp);
+	OFFSET(PT_EAX, pt_regs, ax);
+	OFFSET(PT_DS,  pt_regs, ds);
+	OFFSET(PT_ES,  pt_regs, es);
+	OFFSET(PT_FS,  pt_regs, fs);
+	OFFSET(PT_ORIG_EAX, pt_regs, orig_ax);
+	OFFSET(PT_EIP, pt_regs, ip);
+	OFFSET(PT_CS,  pt_regs, cs);
+	OFFSET(PT_EFLAGS, pt_regs, flags);
+	OFFSET(PT_OLDESP, pt_regs, sp);
+	OFFSET(PT_OLDSS,  pt_regs, ss);
 	BLANK();
 
 	OFFSET(EXEC_DOMAIN_handler, exec_domain, handler);
-	OFFSET(RT_SIGFRAME_sigcontext, rt_sigframe, uc.uc_mcontext);
+	OFFSET(IA32_RT_SIGFRAME_sigcontext, rt_sigframe, uc.uc_mcontext);
 	BLANK();
 
 	OFFSET(pbe_address, pbe, address);
 	OFFSET(pbe_orig_address, pbe, orig_address);
 	OFFSET(pbe_next, pbe, next);
 
-	/* Offset from the sysenter stack to tss.esp0 */
-	DEFINE(TSS_sysenter_esp0, offsetof(struct tss_struct, x86_tss.esp0) -
+	/* Offset from the sysenter stack to tss.sp0 */
+	DEFINE(TSS_sysenter_sp0, offsetof(struct tss_struct, x86_tss.sp0) -
 		 sizeof(struct tss_struct));
 
 	DEFINE(PAGE_SIZE_asm, PAGE_SIZE);
@@ -111,8 +110,6 @@ void foo(void)
 	DEFINE(PTRS_PER_PMD, PTRS_PER_PMD);
 	DEFINE(PTRS_PER_PGD, PTRS_PER_PGD);
 
-	DEFINE(VDSO_PRELINK_asm, VDSO_PRELINK);
-
 	OFFSET(crypto_tfm_ctx_offset, crypto_tfm, __crt_ctx);
 
 #ifdef CONFIG_PARAVIRT
@@ -123,7 +120,7 @@ void foo(void)
 	OFFSET(PV_IRQ_irq_disable, pv_irq_ops, irq_disable);
 	OFFSET(PV_IRQ_irq_enable, pv_irq_ops, irq_enable);
 	OFFSET(PV_CPU_iret, pv_cpu_ops, iret);
-	OFFSET(PV_CPU_irq_enable_sysexit, pv_cpu_ops, irq_enable_sysexit);
+	OFFSET(PV_CPU_irq_enable_syscall_ret, pv_cpu_ops, irq_enable_syscall_ret);
 	OFFSET(PV_CPU_read_cr0, pv_cpu_ops, read_cr0);
 #endif
 

arch/x86/kernel/asm-offsets_64.c

@@ -38,7 +38,6 @@ int main(void)
 #define ENTRY(entry) DEFINE(tsk_ ## entry, offsetof(struct task_struct, entry))
 	ENTRY(state);
 	ENTRY(flags); 
-	ENTRY(thread); 
 	ENTRY(pid);
 	BLANK();
 #undef ENTRY
@@ -47,6 +46,9 @@ int main(void)
 	ENTRY(addr_limit);
 	ENTRY(preempt_count);
 	ENTRY(status);
+#ifdef CONFIG_IA32_EMULATION
+	ENTRY(sysenter_return);
+#endif
 	BLANK();
 #undef ENTRY
 #define ENTRY(entry) DEFINE(pda_ ## entry, offsetof(struct x8664_pda, entry))
@@ -59,17 +61,31 @@ int main(void)
 	ENTRY(data_offset);
 	BLANK();
 #undef ENTRY
+#ifdef CONFIG_PARAVIRT
+	BLANK();
+	OFFSET(PARAVIRT_enabled, pv_info, paravirt_enabled);
+	OFFSET(PARAVIRT_PATCH_pv_cpu_ops, paravirt_patch_template, pv_cpu_ops);
+	OFFSET(PARAVIRT_PATCH_pv_irq_ops, paravirt_patch_template, pv_irq_ops);
+	OFFSET(PV_IRQ_irq_disable, pv_irq_ops, irq_disable);
+	OFFSET(PV_IRQ_irq_enable, pv_irq_ops, irq_enable);
+	OFFSET(PV_CPU_iret, pv_cpu_ops, iret);
+	OFFSET(PV_CPU_irq_enable_syscall_ret, pv_cpu_ops, irq_enable_syscall_ret);
+	OFFSET(PV_CPU_swapgs, pv_cpu_ops, swapgs);
+	OFFSET(PV_MMU_read_cr2, pv_mmu_ops, read_cr2);
+#endif
+
+
 #ifdef CONFIG_IA32_EMULATION
 #define ENTRY(entry) DEFINE(IA32_SIGCONTEXT_ ## entry, offsetof(struct sigcontext_ia32, entry))
-	ENTRY(eax);
-	ENTRY(ebx);
-	ENTRY(ecx);
-	ENTRY(edx);
-	ENTRY(esi);
-	ENTRY(edi);
-	ENTRY(ebp);
-	ENTRY(esp);
-	ENTRY(eip);
+	ENTRY(ax);
+	ENTRY(bx);
+	ENTRY(cx);
+	ENTRY(dx);
+	ENTRY(si);
+	ENTRY(di);
+	ENTRY(bp);
+	ENTRY(sp);
+	ENTRY(ip);
 	BLANK();
 #undef ENTRY
 	DEFINE(IA32_RT_SIGFRAME_sigcontext,
@@ -81,14 +97,14 @@ int main(void)
 	DEFINE(pbe_next, offsetof(struct pbe, next));
 	BLANK();
 #define ENTRY(entry) DEFINE(pt_regs_ ## entry, offsetof(struct pt_regs, entry))
-	ENTRY(rbx);
-	ENTRY(rbx);
-	ENTRY(rcx);
-	ENTRY(rdx);
-	ENTRY(rsp);
-	ENTRY(rbp);
-	ENTRY(rsi);
-	ENTRY(rdi);
+	ENTRY(bx);
+	ENTRY(bx);
+	ENTRY(cx);
+	ENTRY(dx);
+	ENTRY(sp);
+	ENTRY(bp);
+	ENTRY(si);
+	ENTRY(di);
 	ENTRY(r8);
 	ENTRY(r9);
 	ENTRY(r10);
@@ -97,7 +113,7 @@ int main(void)
 	ENTRY(r13);
 	ENTRY(r14);
 	ENTRY(r15);
-	ENTRY(eflags);
+	ENTRY(flags);
 	BLANK();
 #undef ENTRY
 #define ENTRY(entry) DEFINE(saved_context_ ## entry, offsetof(struct saved_context, entry))
@@ -108,7 +124,7 @@ int main(void)
 	ENTRY(cr8);
 	BLANK();
 #undef ENTRY
-	DEFINE(TSS_ist, offsetof(struct tss_struct, ist));
+	DEFINE(TSS_ist, offsetof(struct tss_struct, x86_tss.ist));
 	BLANK();
 	DEFINE(crypto_tfm_ctx_offset, offsetof(struct crypto_tfm, __crt_ctx));
 	BLANK();

arch/x86/kernel/bootflag.c

@@ -1,8 +1,6 @@
 /*
  *	Implement 'Simple Boot Flag Specification 2.0'
  */
-
-
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
@@ -14,40 +12,38 @@
 
 #include <linux/mc146818rtc.h>
 
-
 #define SBF_RESERVED (0x78)
 #define SBF_PNPOS    (1<<0)
 #define SBF_BOOTING  (1<<1)
 #define SBF_DIAG     (1<<2)
 #define SBF_PARITY   (1<<7)
 
-
 int sbf_port __initdata = -1;	/* set via acpi_boot_init() */
 
-
 static int __init parity(u8 v)
 {
 	int x = 0;
 	int i;
-	
-	for(i=0;i<8;i++)
-	{
-		x^=(v&1);
-		v>>=1;
+
+	for (i = 0; i < 8; i++) {
+		x ^= (v & 1);
+		v >>= 1;
 	}
+
 	return x;
 }
 
 static void __init sbf_write(u8 v)
 {
 	unsigned long flags;
-	if(sbf_port != -1)
-	{
+
+	if (sbf_port != -1) {
 		v &= ~SBF_PARITY;
-		if(!parity(v))
-			v|=SBF_PARITY;
+		if (!parity(v))
+			v |= SBF_PARITY;
 
-		printk(KERN_INFO "Simple Boot Flag at 0x%x set to 0x%x\n", sbf_port, v);
+		printk(KERN_INFO "Simple Boot Flag at 0x%x set to 0x%x\n",
+			sbf_port, v);
 
 		spin_lock_irqsave(&rtc_lock, flags);
 		CMOS_WRITE(v, sbf_port);
@@ -57,33 +53,41 @@ static void __init sbf_write(u8 v)
 
 static u8 __init sbf_read(void)
 {
-	u8 v;
 	unsigned long flags;
-	if(sbf_port == -1)
+	u8 v;
+
+	if (sbf_port == -1)
 		return 0;
+
 	spin_lock_irqsave(&rtc_lock, flags);
 	v = CMOS_READ(sbf_port);
 	spin_unlock_irqrestore(&rtc_lock, flags);
+
 	return v;
 }
 
 static int __init sbf_value_valid(u8 v)
 {
-	if(v&SBF_RESERVED)		/* Reserved bits */
+	if (v & SBF_RESERVED)		/* Reserved bits */
 		return 0;
-	if(!parity(v))
+	if (!parity(v))
 		return 0;
+
 	return 1;
 }
 
 static int __init sbf_init(void)
 {
 	u8 v;
-	if(sbf_port == -1)
+
+	if (sbf_port == -1)
 		return 0;
+
 	v = sbf_read();
-	if(!sbf_value_valid(v))
-		printk(KERN_WARNING "Simple Boot Flag value 0x%x read from CMOS RAM was invalid\n",v);
+	if (!sbf_value_valid(v)) {
+		printk(KERN_WARNING "Simple Boot Flag value 0x%x read from "
+			"CMOS RAM was invalid\n", v);
+	}
 
 	v &= ~SBF_RESERVED;
 	v &= ~SBF_BOOTING;
@@ -92,7 +96,7 @@ static int __init sbf_init(void)
 	v |= SBF_PNPOS;
 #endif
 	sbf_write(v);
+
 	return 0;
 }
-
 module_init(sbf_init);

arch/x86/kernel/bugs_64.c

@@ -13,7 +13,6 @@
 void __init check_bugs(void)
 {
 	identify_cpu(&boot_cpu_data);
-	mtrr_bp_init();
 #if !defined(CONFIG_SMP)
 	printk("CPU: ");
 	print_cpu_info(&boot_cpu_data);

arch/x86/kernel/cpu/addon_cpuid_features.c

@@ -45,6 +45,6 @@ void __cpuinit init_scattered_cpuid_features(struct cpuinfo_x86 *c)
 			&regs[CR_ECX], &regs[CR_EDX]);
 
 		if (regs[cb->reg] & (1 << cb->bit))
-			set_bit(cb->feature, c->x86_capability);
+			set_cpu_cap(c, cb->feature);
 	}
 }

arch/x86/kernel/cpu/amd.c

@@ -63,6 +63,15 @@ static __cpuinit int amd_apic_timer_broken(void)
 
 int force_mwait __cpuinitdata;
 
+void __cpuinit early_init_amd(struct cpuinfo_x86 *c)
+{
+	if (cpuid_eax(0x80000000) >= 0x80000007) {
+		c->x86_power = cpuid_edx(0x80000007);
+		if (c->x86_power & (1<<8))
+			set_bit(X86_FEATURE_CONSTANT_TSC, c->x86_capability);
+	}
+}
+
 static void __cpuinit init_amd(struct cpuinfo_x86 *c)
 {
 	u32 l, h;
@@ -85,6 +94,8 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c)
 	}
 #endif
 
+	early_init_amd(c);
+
 	/*
 	 *	FIXME: We should handle the K5 here. Set up the write
 	 *	range and also turn on MSR 83 bits 4 and 31 (write alloc,
@@ -257,12 +268,6 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c)
 		c->x86_max_cores = (cpuid_ecx(0x80000008) & 0xff) + 1;
 	}
 
-	if (cpuid_eax(0x80000000) >= 0x80000007) {
-		c->x86_power = cpuid_edx(0x80000007);
-		if (c->x86_power & (1<<8))
-			set_bit(X86_FEATURE_CONSTANT_TSC, c->x86_capability);
-	}
-
 #ifdef CONFIG_X86_HT
 	/*
 	 * On a AMD multi core setup the lower bits of the APIC id
@@ -295,12 +300,12 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c)
 		local_apic_timer_disabled = 1;
 #endif
 
-	if (c->x86 == 0x10 && !force_mwait)
-		clear_bit(X86_FEATURE_MWAIT, c->x86_capability);
-
 	/* K6s reports MCEs but don't actually have all the MSRs */
 	if (c->x86 < 6)
 		clear_bit(X86_FEATURE_MCE, c->x86_capability);
+
+	if (cpu_has_xmm)
+		set_bit(X86_FEATURE_MFENCE_RDTSC, c->x86_capability);
 }
 
 static unsigned int __cpuinit amd_size_cache(struct cpuinfo_x86 * c, unsigned int size)

arch/x86/kernel/cpu/bugs.c

@@ -11,6 +11,7 @@
 #include <linux/utsname.h>
 #include <asm/bugs.h>
 #include <asm/processor.h>
+#include <asm/processor-flags.h>
 #include <asm/i387.h>
 #include <asm/msr.h>
 #include <asm/paravirt.h>
@@ -35,7 +36,7 @@ __setup("mca-pentium", mca_pentium);
 static int __init no_387(char *s)
 {
 	boot_cpu_data.hard_math = 0;
-	write_cr0(0xE | read_cr0());
+	write_cr0(X86_CR0_TS | X86_CR0_EM | X86_CR0_MP | read_cr0());
 	return 1;
 }
 
@@ -153,7 +154,7 @@ static void __init check_config(void)
  * If we configured ourselves for a TSC, we'd better have one!
  */
 #ifdef CONFIG_X86_TSC
-	if (!cpu_has_tsc && !tsc_disable)
+	if (!cpu_has_tsc)
 		panic("Kernel compiled for Pentium+, requires TSC feature!");
 #endif
 

arch/x86/kernel/cpu/common.c

@@ -22,43 +22,48 @@
 #include "cpu.h"
 
 DEFINE_PER_CPU(struct gdt_page, gdt_page) = { .gdt = {
-	[GDT_ENTRY_KERNEL_CS] = { 0x0000ffff, 0x00cf9a00 },
-	[GDT_ENTRY_KERNEL_DS] = { 0x0000ffff, 0x00cf9200 },
-	[GDT_ENTRY_DEFAULT_USER_CS] = { 0x0000ffff, 0x00cffa00 },
-	[GDT_ENTRY_DEFAULT_USER_DS] = { 0x0000ffff, 0x00cff200 },
+	[GDT_ENTRY_KERNEL_CS] = { { { 0x0000ffff, 0x00cf9a00 } } },
+	[GDT_ENTRY_KERNEL_DS] = { { { 0x0000ffff, 0x00cf9200 } } },
+	[GDT_ENTRY_DEFAULT_USER_CS] = { { { 0x0000ffff, 0x00cffa00 } } },
+	[GDT_ENTRY_DEFAULT_USER_DS] = { { { 0x0000ffff, 0x00cff200 } } },
 	/*
 	 * Segments used for calling PnP BIOS have byte granularity.
 	 * They code segments and data segments have fixed 64k limits,
 	 * the transfer segment sizes are set at run time.
 	 */
-	[GDT_ENTRY_PNPBIOS_CS32] = { 0x0000ffff, 0x00409a00 },/* 32-bit code */
-	[GDT_ENTRY_PNPBIOS_CS16] = { 0x0000ffff, 0x00009a00 },/* 16-bit code */
-	[GDT_ENTRY_PNPBIOS_DS] = { 0x0000ffff, 0x00009200 }, /* 16-bit data */
-	[GDT_ENTRY_PNPBIOS_TS1] = { 0x00000000, 0x00009200 },/* 16-bit data */
-	[GDT_ENTRY_PNPBIOS_TS2] = { 0x00000000, 0x00009200 },/* 16-bit data */
+	/* 32-bit code */
+	[GDT_ENTRY_PNPBIOS_CS32] = { { { 0x0000ffff, 0x00409a00 } } },
+	/* 16-bit code */
+	[GDT_ENTRY_PNPBIOS_CS16] = { { { 0x0000ffff, 0x00009a00 } } },
+	/* 16-bit data */
+	[GDT_ENTRY_PNPBIOS_DS] = { { { 0x0000ffff, 0x00009200 } } },
+	/* 16-bit data */
+	[GDT_ENTRY_PNPBIOS_TS1] = { { { 0x00000000, 0x00009200 } } },
+	/* 16-bit data */
+	[GDT_ENTRY_PNPBIOS_TS2] = { { { 0x00000000, 0x00009200 } } },
 	/*
 	 * The APM segments have byte granularity and their bases
 	 * are set at run time.  All have 64k limits.
 	 */
-	[GDT_ENTRY_APMBIOS_BASE] = { 0x0000ffff, 0x00409a00 },/* 32-bit code */
+	/* 32-bit code */
+	[GDT_ENTRY_APMBIOS_BASE] = { { { 0x0000ffff, 0x00409a00 } } },
 	/* 16-bit code */
-	[GDT_ENTRY_APMBIOS_BASE+1] = { 0x0000ffff, 0x00009a00 },
-	[GDT_ENTRY_APMBIOS_BASE+2] = { 0x0000ffff, 0x00409200 }, /* data */
+	[GDT_ENTRY_APMBIOS_BASE+1] = { { { 0x0000ffff, 0x00009a00 } } },
+	/* data */
+	[GDT_ENTRY_APMBIOS_BASE+2] = { { { 0x0000ffff, 0x00409200 } } },
 
-	[GDT_ENTRY_ESPFIX_SS] = { 0x00000000, 0x00c09200 },
-	[GDT_ENTRY_PERCPU] = { 0x00000000, 0x00000000 },
+	[GDT_ENTRY_ESPFIX_SS] = { { { 0x00000000, 0x00c09200 } } },
+	[GDT_ENTRY_PERCPU] = { { { 0x00000000, 0x00000000 } } },
 } };
 EXPORT_PER_CPU_SYMBOL_GPL(gdt_page);
 
+__u32 cleared_cpu_caps[NCAPINTS] __cpuinitdata;
+
 static int cachesize_override __cpuinitdata = -1;
-static int disable_x86_fxsr __cpuinitdata;
 static int disable_x86_serial_nr __cpuinitdata = 1;
-static int disable_x86_sep __cpuinitdata;
 
 struct cpu_dev * cpu_devs[X86_VENDOR_NUM] = {};
 
-extern int disable_pse;
-
 static void __cpuinit default_init(struct cpuinfo_x86 * c)
 {
 	/* Not much we can do here... */
@@ -207,16 +212,8 @@ static void __cpuinit get_cpu_vendor(struct cpuinfo_x86 *c, int early)
 
 static int __init x86_fxsr_setup(char * s)
 {
-	/* Tell all the other CPUs to not use it... */
-	disable_x86_fxsr = 1;
-
-	/*
-	 * ... and clear the bits early in the boot_cpu_data
-	 * so that the bootup process doesn't try to do this
-	 * either.
-	 */
-	clear_bit(X86_FEATURE_FXSR, boot_cpu_data.x86_capability);
-	clear_bit(X86_FEATURE_XMM, boot_cpu_data.x86_capability);
+	setup_clear_cpu_cap(X86_FEATURE_FXSR);
+	setup_clear_cpu_cap(X86_FEATURE_XMM);
 	return 1;
 }
 __setup("nofxsr", x86_fxsr_setup);
@@ -224,7 +221,7 @@ __setup("nofxsr", x86_fxsr_setup);
 
 static int __init x86_sep_setup(char * s)
 {
-	disable_x86_sep = 1;
+	setup_clear_cpu_cap(X86_FEATURE_SEP);
 	return 1;
 }
 __setup("nosep", x86_sep_setup);
@@ -281,6 +278,33 @@ void __init cpu_detect(struct cpuinfo_x86 *c)
 			c->x86_cache_alignment = ((misc >> 8) & 0xff) * 8;
 	}
 }
+static void __cpuinit early_get_cap(struct cpuinfo_x86 *c)
+{
+	u32 tfms, xlvl;
+	int ebx;
+
+	memset(&c->x86_capability, 0, sizeof c->x86_capability);
+	if (have_cpuid_p()) {
+		/* Intel-defined flags: level 0x00000001 */
+		if (c->cpuid_level >= 0x00000001) {
+			u32 capability, excap;
+			cpuid(0x00000001, &tfms, &ebx, &excap, &capability);
+			c->x86_capability[0] = capability;
+			c->x86_capability[4] = excap;
+		}
+
+		/* AMD-defined flags: level 0x80000001 */
+		xlvl = cpuid_eax(0x80000000);
+		if ((xlvl & 0xffff0000) == 0x80000000) {
+			if (xlvl >= 0x80000001) {
+				c->x86_capability[1] = cpuid_edx(0x80000001);
+				c->x86_capability[6] = cpuid_ecx(0x80000001);
+			}
+		}
+
+	}
+
+}
 
 /* Do minimum CPU detection early.
    Fields really needed: vendor, cpuid_level, family, model, mask, cache alignment.
@@ -300,6 +324,17 @@ static void __init early_cpu_detect(void)
 	cpu_detect(c);
 
 	get_cpu_vendor(c, 1);
+
+	switch (c->x86_vendor) {
+	case X86_VENDOR_AMD:
+		early_init_amd(c);
+		break;
+	case X86_VENDOR_INTEL:
+		early_init_intel(c);
+		break;
+	}
+
+	early_get_cap(c);
 }
 
 static void __cpuinit generic_identify(struct cpuinfo_x86 * c)
@@ -357,8 +392,6 @@ static void __cpuinit generic_identify(struct cpuinfo_x86 * c)
 		init_scattered_cpuid_features(c);
 	}
 
-	early_intel_workaround(c);
-
 #ifdef CONFIG_X86_HT
 	c->phys_proc_id = (cpuid_ebx(1) >> 24) & 0xff;
 #endif
@@ -392,7 +425,7 @@ __setup("serialnumber", x86_serial_nr_setup);
 /*
  * This does the hard work of actually picking apart the CPU stuff...
  */
-static void __cpuinit identify_cpu(struct cpuinfo_x86 *c)
+void __cpuinit identify_cpu(struct cpuinfo_x86 *c)
 {
 	int i;
 
@@ -418,20 +451,9 @@ static void __cpuinit identify_cpu(struct cpuinfo_x86 *c)
 
 	generic_identify(c);
 
-	printk(KERN_DEBUG "CPU: After generic identify, caps:");
-	for (i = 0; i < NCAPINTS; i++)
-		printk(" %08lx", c->x86_capability[i]);
-	printk("\n");
-
-	if (this_cpu->c_identify) {
+	if (this_cpu->c_identify)
 		this_cpu->c_identify(c);
 
-		printk(KERN_DEBUG "CPU: After vendor identify, caps:");
-		for (i = 0; i < NCAPINTS; i++)
-			printk(" %08lx", c->x86_capability[i]);
-		printk("\n");
-	}
-
 	/*
 	 * Vendor-specific initialization.  In this section we
 	 * canonicalize the feature flags, meaning if there are
@@ -453,23 +475,6 @@ static void __cpuinit identify_cpu(struct cpuinfo_x86 *c)
 	 * we do "generic changes."
 	 */
 
-	/* TSC disabled? */
-	if ( tsc_disable )
-		clear_bit(X86_FEATURE_TSC, c->x86_capability);
-
-	/* FXSR disabled? */
-	if (disable_x86_fxsr) {
-		clear_bit(X86_FEATURE_FXSR, c->x86_capability);
-		clear_bit(X86_FEATURE_XMM, c->x86_capability);
-	}
-
-	/* SEP disabled? */
-	if (disable_x86_sep)
-		clear_bit(X86_FEATURE_SEP, c->x86_capability);
-
-	if (disable_pse)
-		clear_bit(X86_FEATURE_PSE, c->x86_capability);
-
 	/* If the model name is still unset, do table lookup. */
 	if ( !c->x86_model_id[0] ) {
 		char *p;
@@ -482,13 +487,6 @@ static void __cpuinit identify_cpu(struct cpuinfo_x86 *c)
 				c->x86, c->x86_model);
 	}
 
-	/* Now the feature flags better reflect actual CPU features! */
-
-	printk(KERN_DEBUG "CPU: After all inits, caps:");
-	for (i = 0; i < NCAPINTS; i++)
-		printk(" %08lx", c->x86_capability[i]);
-	printk("\n");
-
 	/*
 	 * On SMP, boot_cpu_data holds the common feature set between
 	 * all CPUs; so make sure that we indicate which features are
@@ -501,8 +499,14 @@ static void __cpuinit identify_cpu(struct cpuinfo_x86 *c)
 			boot_cpu_data.x86_capability[i] &= c->x86_capability[i];
 	}
 
+	/* Clear all flags overriden by options */
+	for (i = 0; i < NCAPINTS; i++)
+		c->x86_capability[i] ^= cleared_cpu_caps[i];
+
 	/* Init Machine Check Exception if available. */
 	mcheck_init(c);
+
+	select_idle_routine(c);
 }
 
 void __init identify_boot_cpu(void)
@@ -510,7 +514,6 @@ void __init identify_boot_cpu(void)
 	identify_cpu(&boot_cpu_data);
 	sysenter_setup();
 	enable_sep_cpu();
-	mtrr_bp_init();
 }
 
 void __cpuinit identify_secondary_cpu(struct cpuinfo_x86 *c)
@@ -567,6 +570,13 @@ void __cpuinit detect_ht(struct cpuinfo_x86 *c)
 }
 #endif
 
+static __init int setup_noclflush(char *arg)
+{
+	setup_clear_cpu_cap(X86_FEATURE_CLFLSH);
+	return 1;
+}
+__setup("noclflush", setup_noclflush);
+
 void __cpuinit print_cpu_info(struct cpuinfo_x86 *c)
 {
 	char *vendor = NULL;
@@ -590,6 +600,17 @@ void __cpuinit print_cpu_info(struct cpuinfo_x86 *c)
 		printk("\n");
 }
 
+static __init int setup_disablecpuid(char *arg)
+{
+	int bit;
+	if (get_option(&arg, &bit) && bit < NCAPINTS*32)
+		setup_clear_cpu_cap(bit);
+	else
+		return 0;
+	return 1;
+}
+__setup("clearcpuid=", setup_disablecpuid);
+
 cpumask_t cpu_initialized __cpuinitdata = CPU_MASK_NONE;
 
 /* This is hacky. :)
@@ -620,21 +641,13 @@ void __init early_cpu_init(void)
 	nexgen_init_cpu();
 	umc_init_cpu();
 	early_cpu_detect();
-
-#ifdef CONFIG_DEBUG_PAGEALLOC
-	/* pse is not compatible with on-the-fly unmapping,
-	 * disable it even if the cpus claim to support it.
-	 */
-	clear_bit(X86_FEATURE_PSE, boot_cpu_data.x86_capability);
-	disable_pse = 1;
-#endif
 }
 
 /* Make sure %fs is initialized properly in idle threads */
 struct pt_regs * __devinit idle_regs(struct pt_regs *regs)
 {
 	memset(regs, 0, sizeof(struct pt_regs));
-	regs->xfs = __KERNEL_PERCPU;
+	regs->fs = __KERNEL_PERCPU;
 	return regs;
 }
 
@@ -642,7 +655,7 @@ struct pt_regs * __devinit idle_regs(struct pt_regs *regs)
  * it's on the real one. */
 void switch_to_new_gdt(void)
 {
-	struct Xgt_desc_struct gdt_descr;
+	struct desc_ptr gdt_descr;
 
 	gdt_descr.address = (long)get_cpu_gdt_table(smp_processor_id());
 	gdt_descr.size = GDT_SIZE - 1;
@@ -672,12 +685,6 @@ void __cpuinit cpu_init(void)
 
 	if (cpu_has_vme || cpu_has_tsc || cpu_has_de)
 		clear_in_cr4(X86_CR4_VME|X86_CR4_PVI|X86_CR4_TSD|X86_CR4_DE);
-	if (tsc_disable && cpu_has_tsc) {
-		printk(KERN_NOTICE "Disabling TSC...\n");
-		/**** FIX-HPA: DOES THIS REALLY BELONG HERE? ****/
-		clear_bit(X86_FEATURE_TSC, boot_cpu_data.x86_capability);
-		set_in_cr4(X86_CR4_TSD);
-	}
 
 	load_idt(&idt_descr);
 	switch_to_new_gdt();
@@ -691,7 +698,7 @@ void __cpuinit cpu_init(void)
 		BUG();
 	enter_lazy_tlb(&init_mm, curr);
 
-	load_esp0(t, thread);
+	load_sp0(t, thread);
 	set_tss_desc(cpu,t);
 	load_TR_desc();
 	load_LDT(&init_mm.context);

arch/x86/kernel/cpu/cpu.h

@@ -24,5 +24,6 @@ extern struct cpu_dev * cpu_devs [X86_VENDOR_NUM];
 extern int get_model_name(struct cpuinfo_x86 *c);
 extern void display_cacheinfo(struct cpuinfo_x86 *c);
 
-extern void early_intel_workaround(struct cpuinfo_x86 *c);
+extern void early_init_intel(struct cpuinfo_x86 *c);
+extern void early_init_amd(struct cpuinfo_x86 *c);
 

arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c

@@ -67,7 +67,8 @@ struct acpi_cpufreq_data {
 	unsigned int cpu_feature;
 };
 
-static struct acpi_cpufreq_data *drv_data[NR_CPUS];
+static DEFINE_PER_CPU(struct acpi_cpufreq_data *, drv_data);
+
 /* acpi_perf_data is a pointer to percpu data. */
 static struct acpi_processor_performance *acpi_perf_data;
 
@@ -218,14 +219,14 @@ static u32 get_cur_val(cpumask_t mask)
 	if (unlikely(cpus_empty(mask)))
 		return 0;
 
-	switch (drv_data[first_cpu(mask)]->cpu_feature) {
+	switch (per_cpu(drv_data, first_cpu(mask))->cpu_feature) {
 	case SYSTEM_INTEL_MSR_CAPABLE:
 		cmd.type = SYSTEM_INTEL_MSR_CAPABLE;
 		cmd.addr.msr.reg = MSR_IA32_PERF_STATUS;
 		break;
 	case SYSTEM_IO_CAPABLE:
 		cmd.type = SYSTEM_IO_CAPABLE;
-		perf = drv_data[first_cpu(mask)]->acpi_data;
+		perf = per_cpu(drv_data, first_cpu(mask))->acpi_data;
 		cmd.addr.io.port = perf->control_register.address;
 		cmd.addr.io.bit_width = perf->control_register.bit_width;
 		break;
@@ -325,7 +326,7 @@ static unsigned int get_measured_perf(unsigned int cpu)
 
 #endif
 
-	retval = drv_data[cpu]->max_freq * perf_percent / 100;
+	retval = per_cpu(drv_data, cpu)->max_freq * perf_percent / 100;
 
 	put_cpu();
 	set_cpus_allowed(current, saved_mask);
@@ -336,7 +337,7 @@ static unsigned int get_measured_perf(unsigned int cpu)
 
 static unsigned int get_cur_freq_on_cpu(unsigned int cpu)
 {
-	struct acpi_cpufreq_data *data = drv_data[cpu];
+	struct acpi_cpufreq_data *data = per_cpu(drv_data, cpu);
 	unsigned int freq;
 
 	dprintk("get_cur_freq_on_cpu (%d)\n", cpu);
@@ -370,7 +371,7 @@ static unsigned int check_freqs(cpumask_t mask, unsigned int freq,
 static int acpi_cpufreq_target(struct cpufreq_policy *policy,
 			       unsigned int target_freq, unsigned int relation)
 {
-	struct acpi_cpufreq_data *data = drv_data[policy->cpu];
+	struct acpi_cpufreq_data *data = per_cpu(drv_data, policy->cpu);
 	struct acpi_processor_performance *perf;
 	struct cpufreq_freqs freqs;
 	cpumask_t online_policy_cpus;
@@ -466,7 +467,7 @@ static int acpi_cpufreq_target(struct cpufreq_policy *policy,
 
 static int acpi_cpufreq_verify(struct cpufreq_policy *policy)
 {
-	struct acpi_cpufreq_data *data = drv_data[policy->cpu];
+	struct acpi_cpufreq_data *data = per_cpu(drv_data, policy->cpu);
 
 	dprintk("acpi_cpufreq_verify\n");
 
@@ -570,7 +571,7 @@ static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy)
 		return -ENOMEM;
 
 	data->acpi_data = percpu_ptr(acpi_perf_data, cpu);
-	drv_data[cpu] = data;
+	per_cpu(drv_data, cpu) = data;
 
 	if (cpu_has(c, X86_FEATURE_CONSTANT_TSC))
 		acpi_cpufreq_driver.flags |= CPUFREQ_CONST_LOOPS;
@@ -714,20 +715,20 @@ err_unreg:
 	acpi_processor_unregister_performance(perf, cpu);
 err_free:
 	kfree(data);
-	drv_data[cpu] = NULL;
+	per_cpu(drv_data, cpu) = NULL;
 
 	return result;
 }
 
 static int acpi_cpufreq_cpu_exit(struct cpufreq_policy *policy)
 {
-	struct acpi_cpufreq_data *data = drv_data[policy->cpu];
+	struct acpi_cpufreq_data *data = per_cpu(drv_data, policy->cpu);
 
 	dprintk("acpi_cpufreq_cpu_exit\n");
 
 	if (data) {
 		cpufreq_frequency_table_put_attr(policy->cpu);
-		drv_data[policy->cpu] = NULL;
+		per_cpu(drv_data, policy->cpu) = NULL;
 		acpi_processor_unregister_performance(data->acpi_data,
 						      policy->cpu);
 		kfree(data);
@@ -738,7 +739,7 @@ static int acpi_cpufreq_cpu_exit(struct cpufreq_policy *policy)
 
 static int acpi_cpufreq_resume(struct cpufreq_policy *policy)
 {
-	struct acpi_cpufreq_data *data = drv_data[policy->cpu];
+	struct acpi_cpufreq_data *data = per_cpu(drv_data, policy->cpu);
 
 	dprintk("acpi_cpufreq_resume\n");
 

arch/x86/kernel/cpu/cpufreq/longhaul.c

@@ -694,7 +694,7 @@ static acpi_status longhaul_walk_callback(acpi_handle obj_handle,
 	if ( acpi_bus_get_device(obj_handle, &d) ) {
 		return 0;
 	}
-	*return_value = (void *)acpi_driver_data(d);
+	*return_value = acpi_driver_data(d);
 	return 1;
 }
 

arch/x86/kernel/cpu/cpufreq/powernow-k8.c

@@ -52,7 +52,7 @@
 /* serialize freq changes  */
 static DEFINE_MUTEX(fidvid_mutex);
 
-static struct powernow_k8_data *powernow_data[NR_CPUS];
+static DEFINE_PER_CPU(struct powernow_k8_data *, powernow_data);
 
 static int cpu_family = CPU_OPTERON;
 
@@ -1018,7 +1018,7 @@ static int transition_frequency_pstate(struct powernow_k8_data *data, unsigned i
 static int powernowk8_target(struct cpufreq_policy *pol, unsigned targfreq, unsigned relation)
 {
 	cpumask_t oldmask = CPU_MASK_ALL;
-	struct powernow_k8_data *data = powernow_data[pol->cpu];
+	struct powernow_k8_data *data = per_cpu(powernow_data, pol->cpu);
 	u32 checkfid;
 	u32 checkvid;
 	unsigned int newstate;
@@ -1094,7 +1094,7 @@ err_out:
 /* Driver entry point to verify the policy and range of frequencies */
 static int powernowk8_verify(struct cpufreq_policy *pol)
 {
-	struct powernow_k8_data *data = powernow_data[pol->cpu];
+	struct powernow_k8_data *data = per_cpu(powernow_data, pol->cpu);
 
 	if (!data)
 		return -EINVAL;
@@ -1202,7 +1202,7 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol)
 		dprintk("cpu_init done, current fid 0x%x, vid 0x%x\n",
 			data->currfid, data->currvid);
 
-	powernow_data[pol->cpu] = data;
+	per_cpu(powernow_data, pol->cpu) = data;
 
 	return 0;
 
@@ -1216,7 +1216,7 @@ err_out:
 
 static int __devexit powernowk8_cpu_exit (struct cpufreq_policy *pol)
 {
-	struct powernow_k8_data *data = powernow_data[pol->cpu];
+	struct powernow_k8_data *data = per_cpu(powernow_data, pol->cpu);
 
 	if (!data)
 		return -EINVAL;
@@ -1237,7 +1237,7 @@ static unsigned int powernowk8_get (unsigned int cpu)
 	cpumask_t oldmask = current->cpus_allowed;
 	unsigned int khz = 0;
 
-	data = powernow_data[first_cpu(per_cpu(cpu_core_map, cpu))];
+	data = per_cpu(powernow_data, first_cpu(per_cpu(cpu_core_map, cpu)));
 
 	if (!data)
 		return -EINVAL;

arch/x86/kernel/cpu/cyrix.c

@@ -5,6 +5,7 @@
 #include <asm/dma.h>
 #include <asm/io.h>
 #include <asm/processor-cyrix.h>
+#include <asm/processor-flags.h>
 #include <asm/timer.h>
 #include <asm/pci-direct.h>
 #include <asm/tsc.h>
@@ -126,15 +127,12 @@ static void __cpuinit set_cx86_reorder(void)
 
 static void __cpuinit set_cx86_memwb(void)
 {
-	u32 cr0;
-
 	printk(KERN_INFO "Enable Memory-Write-back mode on Cyrix/NSC processor.\n");
 
 	/* CCR2 bit 2: unlock NW bit */
 	setCx86(CX86_CCR2, getCx86(CX86_CCR2) & ~0x04);
 	/* set 'Not Write-through' */
-	cr0 = 0x20000000;
-	write_cr0(read_cr0() | cr0);
+	write_cr0(read_cr0() | X86_CR0_NW);
 	/* CCR2 bit 2: lock NW bit and set WT1 */
 	setCx86(CX86_CCR2, getCx86(CX86_CCR2) | 0x14 );
 }

arch/x86/kernel/cpu/intel.c

@@ -11,6 +11,8 @@
 #include <asm/pgtable.h>
 #include <asm/msr.h>
 #include <asm/uaccess.h>
+#include <asm/ptrace.h>
+#include <asm/ds.h>
 
 #include "cpu.h"
 
@@ -27,13 +29,14 @@
 struct movsl_mask movsl_mask __read_mostly;
 #endif
 
-void __cpuinit early_intel_workaround(struct cpuinfo_x86 *c)
+void __cpuinit early_init_intel(struct cpuinfo_x86 *c)
 {
-	if (c->x86_vendor != X86_VENDOR_INTEL)
-		return;
 	/* Netburst reports 64 bytes clflush size, but does IO in 128 bytes */
 	if (c->x86 == 15 && c->x86_cache_alignment == 64)
 		c->x86_cache_alignment = 128;
+	if ((c->x86 == 0xf && c->x86_model >= 0x03) ||
+		(c->x86 == 0x6 && c->x86_model >= 0x0e))
+		set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);
 }
 
 /*
@@ -113,6 +116,8 @@ static void __cpuinit init_intel(struct cpuinfo_x86 *c)
 	unsigned int l2 = 0;
 	char *p = NULL;
 
+	early_init_intel(c);
+
 #ifdef CONFIG_X86_F00F_BUG
 	/*
 	 * All current models of Pentium and Pentium with MMX technology CPUs
@@ -132,7 +137,6 @@ static void __cpuinit init_intel(struct cpuinfo_x86 *c)
 	}
 #endif
 
-	select_idle_routine(c);
 	l2 = init_intel_cacheinfo(c);
 	if (c->cpuid_level > 9 ) {
 		unsigned eax = cpuid_eax(10);
@@ -201,16 +205,13 @@ static void __cpuinit init_intel(struct cpuinfo_x86 *c)
 	}
 #endif
 
+	if (cpu_has_xmm2)
+		set_bit(X86_FEATURE_LFENCE_RDTSC, c->x86_capability);
 	if (c->x86 == 15) {
 		set_bit(X86_FEATURE_P4, c->x86_capability);
-		set_bit(X86_FEATURE_SYNC_RDTSC, c->x86_capability);
 	}
 	if (c->x86 == 6) 
 		set_bit(X86_FEATURE_P3, c->x86_capability);
-	if ((c->x86 == 0xf && c->x86_model >= 0x03) ||
-		(c->x86 == 0x6 && c->x86_model >= 0x0e))
-		set_bit(X86_FEATURE_CONSTANT_TSC, c->x86_capability);
-
 	if (cpu_has_ds) {
 		unsigned int l1;
 		rdmsr(MSR_IA32_MISC_ENABLE, l1, l2);
@@ -219,6 +220,9 @@ static void __cpuinit init_intel(struct cpuinfo_x86 *c)
 		if (!(l1 & (1<<12)))
 			set_bit(X86_FEATURE_PEBS, c->x86_capability);
 	}
+
+	if (cpu_has_bts)
+		ds_init_intel(c);
 }
 
 static unsigned int __cpuinit intel_size_cache(struct cpuinfo_x86 * c, unsigned int size)
@@ -342,5 +346,22 @@ unsigned long cmpxchg_386_u32(volatile void *ptr, u32 old, u32 new)
 EXPORT_SYMBOL(cmpxchg_386_u32);
 #endif
 
+#ifndef CONFIG_X86_CMPXCHG64
+unsigned long long cmpxchg_486_u64(volatile void *ptr, u64 old, u64 new)
+{
+	u64 prev;
+	unsigned long flags;
+
+	/* Poor man's cmpxchg8b for 386 and 486. Unsuitable for SMP */
+	local_irq_save(flags);
+	prev = *(u64 *)ptr;
+	if (prev == old)
+		*(u64 *)ptr = new;
+	local_irq_restore(flags);
+	return prev;
+}
+EXPORT_SYMBOL(cmpxchg_486_u64);
+#endif
+
 // arch_initcall(intel_cpu_init);
 

arch/x86/kernel/cpu/mcheck/k7.c

@@ -16,7 +16,7 @@
 #include "mce.h"
 
 /* Machine Check Handler For AMD Athlon/Duron */
-static fastcall void k7_machine_check(struct pt_regs * regs, long error_code)
+static void k7_machine_check(struct pt_regs * regs, long error_code)
 {
 	int recover=1;
 	u32 alow, ahigh, high, low;
@@ -27,29 +27,32 @@ static fastcall void k7_machine_check(struct pt_regs * regs, long error_code)
 	if (mcgstl & (1<<0))	/* Recoverable ? */
 		recover=0;
 
-	printk (KERN_EMERG "CPU %d: Machine Check Exception: %08x%08x\n",
+	printk(KERN_EMERG "CPU %d: Machine Check Exception: %08x%08x\n",
 		smp_processor_id(), mcgsth, mcgstl);
 
-	for (i=1; i<nr_mce_banks; i++) {
-		rdmsr (MSR_IA32_MC0_STATUS+i*4,low, high);
+	for (i = 1; i < nr_mce_banks; i++) {
+		rdmsr(MSR_IA32_MC0_STATUS+i*4, low, high);
 		if (high&(1<<31)) {
+			char misc[20];
+			char addr[24];
+			misc[0] = addr[0] = '\0';
 			if (high & (1<<29))
 				recover |= 1;
 			if (high & (1<<25))
 				recover |= 2;
-			printk (KERN_EMERG "Bank %d: %08x%08x", i, high, low);
 			high &= ~(1<<31);
 			if (high & (1<<27)) {
-				rdmsr (MSR_IA32_MC0_MISC+i*4, alow, ahigh);
-				printk ("[%08x%08x]", ahigh, alow);
+				rdmsr(MSR_IA32_MC0_MISC+i*4, alow, ahigh);
+				snprintf(misc, 20, "[%08x%08x]", ahigh, alow);
 			}
 			if (high & (1<<26)) {
-				rdmsr (MSR_IA32_MC0_ADDR+i*4, alow, ahigh);
-				printk (" at %08x%08x", ahigh, alow);
+				rdmsr(MSR_IA32_MC0_ADDR+i*4, alow, ahigh);
+				snprintf(addr, 24, " at %08x%08x", ahigh, alow);
 			}
-			printk ("\n");
+			printk(KERN_EMERG "CPU %d: Bank %d: %08x%08x%s%s\n",
+				smp_processor_id(), i, high, low, misc, addr);
 			/* Clear it */
-			wrmsr (MSR_IA32_MC0_STATUS+i*4, 0UL, 0UL);
+			wrmsr(MSR_IA32_MC0_STATUS+i*4, 0UL, 0UL);
 			/* Serialize */
 			wmb();
 			add_taint(TAINT_MACHINE_CHECK);

arch/x86/kernel/cpu/mcheck/mce.h

@@ -8,7 +8,7 @@ void intel_p6_mcheck_init(struct cpuinfo_x86 *c);
 void winchip_mcheck_init(struct cpuinfo_x86 *c);
 
 /* Call the installed machine check handler for this CPU setup. */
-extern fastcall void (*machine_check_vector)(struct pt_regs *, long error_code);
+extern void (*machine_check_vector)(struct pt_regs *, long error_code);
 
 extern int nr_mce_banks;
 

arch/x86/kernel/cpu/mcheck/mce_32.c

@@ -22,13 +22,13 @@ int nr_mce_banks;
 EXPORT_SYMBOL_GPL(nr_mce_banks);	/* non-fatal.o */
 
 /* Handle unconfigured int18 (should never happen) */
-static fastcall void unexpected_machine_check(struct pt_regs * regs, long error_code)
+static void unexpected_machine_check(struct pt_regs * regs, long error_code)
 {	
 	printk(KERN_ERR "CPU#%d: Unexpected int18 (Machine Check).\n", smp_processor_id());
 }
 
 /* Call the installed machine check handler for this CPU setup. */
-void fastcall (*machine_check_vector)(struct pt_regs *, long error_code) = unexpected_machine_check;
+void (*machine_check_vector)(struct pt_regs *, long error_code) = unexpected_machine_check;
 
 /* This has to be run for each processor */
 void mcheck_init(struct cpuinfo_x86 *c)

arch/x86/kernel/cpu/mcheck/mce_64.c

@@ -63,7 +63,7 @@ static DECLARE_WAIT_QUEUE_HEAD(mce_wait);
  * separate MCEs from kernel messages to avoid bogus bug reports.
  */
 
-struct mce_log mcelog = {
+static struct mce_log mcelog = {
 	MCE_LOG_SIGNATURE,
 	MCE_LOG_LEN,
 };
@@ -80,7 +80,7 @@ void mce_log(struct mce *mce)
 			/* When the buffer fills up discard new entries. Assume
 			   that the earlier errors are the more interesting. */
 			if (entry >= MCE_LOG_LEN) {
-				set_bit(MCE_OVERFLOW, &mcelog.flags);
+				set_bit(MCE_OVERFLOW, (unsigned long *)&mcelog.flags);
 				return;
 			}
 			/* Old left over entry. Skip. */
@@ -110,12 +110,12 @@ static void print_mce(struct mce *m)
 	       KERN_EMERG
 	       "CPU %d: Machine Check Exception: %16Lx Bank %d: %016Lx\n",
 	       m->cpu, m->mcgstatus, m->bank, m->status);
-	if (m->rip) {
+	if (m->ip) {
 		printk(KERN_EMERG "RIP%s %02x:<%016Lx> ",
 		       !(m->mcgstatus & MCG_STATUS_EIPV) ? " !INEXACT!" : "",
-		       m->cs, m->rip);
+		       m->cs, m->ip);
 		if (m->cs == __KERNEL_CS)
-			print_symbol("{%s}", m->rip);
+			print_symbol("{%s}", m->ip);
 		printk("\n");
 	}
 	printk(KERN_EMERG "TSC %Lx ", m->tsc);
@@ -156,16 +156,16 @@ static int mce_available(struct cpuinfo_x86 *c)
 static inline void mce_get_rip(struct mce *m, struct pt_regs *regs)
 {
 	if (regs && (m->mcgstatus & MCG_STATUS_RIPV)) {
-		m->rip = regs->rip;
+		m->ip = regs->ip;
 		m->cs = regs->cs;
 	} else {
-		m->rip = 0;
+		m->ip = 0;
 		m->cs = 0;
 	}
 	if (rip_msr) {
 		/* Assume the RIP in the MSR is exact. Is this true? */
 		m->mcgstatus |= MCG_STATUS_EIPV;
-		rdmsrl(rip_msr, m->rip);
+		rdmsrl(rip_msr, m->ip);
 		m->cs = 0;
 	}
 }
@@ -192,10 +192,10 @@ void do_machine_check(struct pt_regs * regs, long error_code)
 
 	atomic_inc(&mce_entry);
 
-	if (regs)
-		notify_die(DIE_NMI, "machine check", regs, error_code, 18,
-			   SIGKILL);
-	if (!banks)
+	if ((regs
+	     && notify_die(DIE_NMI, "machine check", regs, error_code,
+			   18, SIGKILL) == NOTIFY_STOP)
+	    || !banks)
 		goto out2;
 
 	memset(&m, 0, sizeof(struct mce));
@@ -288,7 +288,7 @@ void do_machine_check(struct pt_regs * regs, long error_code)
 		 * instruction which caused the MCE.
 		 */
 		if (m.mcgstatus & MCG_STATUS_EIPV)
-			user_space = panicm.rip && (panicm.cs & 3);
+			user_space = panicm.ip && (panicm.cs & 3);
 
 		/*
 		 * If we know that the error was in user space, send a
@@ -564,7 +564,7 @@ static ssize_t mce_read(struct file *filp, char __user *ubuf, size_t usize,
 			loff_t *off)
 {
 	unsigned long *cpu_tsc;
-	static DECLARE_MUTEX(mce_read_sem);
+	static DEFINE_MUTEX(mce_read_mutex);
 	unsigned next;
 	char __user *buf = ubuf;
 	int i, err;
@@ -573,12 +573,12 @@ static ssize_t mce_read(struct file *filp, char __user *ubuf, size_t usize,
 	if (!cpu_tsc)
 		return -ENOMEM;
 
-	down(&mce_read_sem);
+	mutex_lock(&mce_read_mutex);
 	next = rcu_dereference(mcelog.next);
 
 	/* Only supports full reads right now */
 	if (*off != 0 || usize < MCE_LOG_LEN*sizeof(struct mce)) {
-		up(&mce_read_sem);
+		mutex_unlock(&mce_read_mutex);
 		kfree(cpu_tsc);
 		return -EINVAL;
 	}
@@ -621,7 +621,7 @@ static ssize_t mce_read(struct file *filp, char __user *ubuf, size_t usize,
 			memset(&mcelog.entry[i], 0, sizeof(struct mce));
 		}
 	}
-	up(&mce_read_sem);
+	mutex_unlock(&mce_read_mutex);
 	kfree(cpu_tsc);
 	return err ? -EFAULT : buf - ubuf;
 }
@@ -634,8 +634,7 @@ static unsigned int mce_poll(struct file *file, poll_table *wait)
 	return 0;
 }
 
-static int mce_ioctl(struct inode *i, struct file *f,unsigned int cmd,
-		     unsigned long arg)
+static long mce_ioctl(struct file *f, unsigned int cmd, unsigned long arg)
 {
 	int __user *p = (int __user *)arg;
 
@@ -664,7 +663,7 @@ static const struct file_operations mce_chrdev_ops = {
 	.release = mce_release,
 	.read = mce_read,
 	.poll = mce_poll,
-	.ioctl = mce_ioctl,
+	.unlocked_ioctl = mce_ioctl,
 };
 
 static struct miscdevice mce_log_device = {
@@ -855,8 +854,8 @@ static void mce_remove_device(unsigned int cpu)
 }
 
 /* Get notified when a cpu comes on/off. Be hotplug friendly. */
-static int
-mce_cpu_callback(struct notifier_block *nfb, unsigned long action, void *hcpu)
+static int __cpuinit mce_cpu_callback(struct notifier_block *nfb,
+				      unsigned long action, void *hcpu)
 {
 	unsigned int cpu = (unsigned long)hcpu;
 
@@ -873,7 +872,7 @@ mce_cpu_callback(struct notifier_block *nfb, unsigned long action, void *hcpu)
 	return NOTIFY_OK;
 }
 
-static struct notifier_block mce_cpu_notifier = {
+static struct notifier_block mce_cpu_notifier __cpuinitdata = {
 	.notifier_call = mce_cpu_callback,
 };