Merge branch 'wireless-next-2.6' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-2.6

drivers/net/wireless/iwlwifi/iwl-1000.c

@@ -270,7 +270,6 @@ static struct iwl_base_params iwl1000_base_params = {
 	.ucode_tracing = true,
 	.sensitivity_calib_by_driver = true,
 	.chain_noise_calib_by_driver = true,
-	.supports_idle = true,
 };
 static struct iwl_ht_params iwl1000_ht_params = {
 	.ht_greenfield_support = true,

drivers/net/wireless/iwlwifi/iwl-2000.c

@@ -97,6 +97,10 @@ static void iwl2000_nic_config(struct iwl_priv *priv)
 		    CSR_HW_IF_CONFIG_REG_BIT_RADIO_SI |
 		    CSR_HW_IF_CONFIG_REG_BIT_MAC_SI);
 
+	if (priv->cfg->iq_invert)
+		iwl_set_bit(priv, CSR_GP_DRIVER_REG,
+			    CSR_GP_DRIVER_REG_BIT_RADIO_IQ_INVER);
+
 }
 
 static struct iwl_sensitivity_ranges iwl2000_sensitivity = {
@@ -364,7 +368,6 @@ static struct iwl_base_params iwl2000_base_params = {
 	.shadow_ram_support = true,
 	.led_compensation = 51,
 	.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
-	.supports_idle = true,
 	.adv_thermal_throttle = true,
 	.support_ct_kill_exit = true,
 	.plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
@@ -389,7 +392,6 @@ static struct iwl_base_params iwl2030_base_params = {
 	.shadow_ram_support = true,
 	.led_compensation = 57,
 	.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
-	.supports_idle = true,
 	.adv_thermal_throttle = true,
 	.support_ct_kill_exit = true,
 	.plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
@@ -428,7 +430,8 @@ static struct iwl_bt_params iwl2030_bt_params = {
 	.base_params = &iwl2000_base_params,			\
 	.need_dc_calib = true,					\
 	.need_temp_offset_calib = true,				\
-	.led_mode = IWL_LED_RF_STATE				\
+	.led_mode = IWL_LED_RF_STATE,				\
+	.iq_invert = true					\
 
 struct iwl_cfg iwl2000_2bgn_cfg = {
 	.name = "2000 Series 2x2 BGN",
@@ -454,17 +457,18 @@ struct iwl_cfg iwl2000_2bg_cfg = {
 	.need_dc_calib = true,					\
 	.need_temp_offset_calib = true,				\
 	.led_mode = IWL_LED_RF_STATE,				\
-	.adv_pm = true						\
+	.adv_pm = true,						\
+	.iq_invert = true					\
 
 struct iwl_cfg iwl2030_2bgn_cfg = {
 	.name = "2000 Series 2x2 BGN/BT",
-	IWL_DEVICE_2000,
+	IWL_DEVICE_2030,
 	.ht_params = &iwl2000_ht_params,
 };
 
 struct iwl_cfg iwl2030_2bg_cfg = {
 	.name = "2000 Series 2x2 BG/BT",
-	IWL_DEVICE_2000,
+	IWL_DEVICE_2030,
 };
 
 #define IWL_DEVICE_6035						\

drivers/net/wireless/iwlwifi/iwl-4965.c

@@ -251,14 +251,6 @@ static int iwl4965_set_ucode_ptrs(struct iwl_priv *priv)
 */
 static void iwl4965_init_alive_start(struct iwl_priv *priv)
 {
-	/* Check alive response for "valid" sign from uCode */
-	if (priv->card_alive_init.is_valid != UCODE_VALID_OK) {
-		/* We had an error bringing up the hardware, so take it
-		 * all the way back down so we can try again */
-		IWL_DEBUG_INFO(priv, "Initialize Alive failed.\n");
-		goto restart;
-	}
-
 	/* Bootstrap uCode has loaded initialize uCode ... verify inst image.
 	 * This is a paranoid check, because we would not have gotten the
 	 * "initialize" alive if code weren't properly loaded.  */
@@ -2274,6 +2266,29 @@ static void iwl4965_rx_reply_tx(struct iwl_priv *priv,
 	spin_unlock_irqrestore(&priv->sta_lock, flags);
 }
 
+static void iwl4965_rx_beacon_notif(struct iwl_priv *priv,
+				    struct iwl_rx_mem_buffer *rxb)
+{
+	struct iwl_rx_packet *pkt = rxb_addr(rxb);
+	struct iwl4965_beacon_notif *beacon = (void *)pkt->u.raw;
+#ifdef CONFIG_IWLWIFI_DEBUG
+	u8 rate = iwl_hw_get_rate(beacon->beacon_notify_hdr.rate_n_flags);
+
+	IWL_DEBUG_RX(priv, "beacon status %#x, retries:%d ibssmgr:%d "
+		"tsf:0x%.8x%.8x rate:%d\n",
+		le32_to_cpu(beacon->beacon_notify_hdr.u.status) & TX_STATUS_MSK,
+		beacon->beacon_notify_hdr.failure_frame,
+		le32_to_cpu(beacon->ibss_mgr_status),
+		le32_to_cpu(beacon->high_tsf),
+		le32_to_cpu(beacon->low_tsf), rate);
+#endif
+
+	priv->ibss_manager = le32_to_cpu(beacon->ibss_mgr_status);
+
+	if (!test_bit(STATUS_EXIT_PENDING, &priv->status))
+		queue_work(priv->workqueue, &priv->beacon_update);
+}
+
 static int iwl4965_calc_rssi(struct iwl_priv *priv,
 			     struct iwl_rx_phy_res *rx_resp)
 {
@@ -2316,6 +2331,7 @@ static void iwl4965_rx_handler_setup(struct iwl_priv *priv)
 	priv->rx_handlers[REPLY_RX] = iwlagn_rx_reply_rx;
 	/* Tx response */
 	priv->rx_handlers[REPLY_TX] = iwl4965_rx_reply_tx;
+	priv->rx_handlers[BEACON_NOTIFICATION] = iwl4965_rx_beacon_notif;
 
 	/* set up notification wait support */
 	spin_lock_init(&priv->_agn.notif_wait_lock);

drivers/net/wireless/iwlwifi/iwl-6000.c

@@ -479,7 +479,6 @@ static struct iwl_base_params iwl6000_base_params = {
 	.shadow_ram_support = true,
 	.led_compensation = 51,
 	.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
-	.supports_idle = true,
 	.adv_thermal_throttle = true,
 	.support_ct_kill_exit = true,
 	.plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
@@ -503,7 +502,6 @@ static struct iwl_base_params iwl6050_base_params = {
 	.shadow_ram_support = true,
 	.led_compensation = 51,
 	.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
-	.supports_idle = true,
 	.adv_thermal_throttle = true,
 	.support_ct_kill_exit = true,
 	.plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
@@ -526,7 +524,6 @@ static struct iwl_base_params iwl6000_g2_base_params = {
 	.shadow_ram_support = true,
 	.led_compensation = 57,
 	.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
-	.supports_idle = true,
 	.adv_thermal_throttle = true,
 	.support_ct_kill_exit = true,
 	.plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,

drivers/net/wireless/iwlwifi/iwl-agn-lib.c

@@ -1863,21 +1863,6 @@ void iwlagn_send_advance_bt_config(struct iwl_priv *priv)
 	if (iwl_send_cmd_pdu(priv, REPLY_BT_CONFIG, sizeof(bt_cmd), &bt_cmd))
 		IWL_ERR(priv, "failed to send BT Coex Config\n");
 
-	/*
-	 * When we are doing a restart, need to also reconfigure BT
-	 * SCO to the device. If not doing a restart, bt_sco_active
-	 * will always be false, so there's no need to have an extra
-	 * variable to check for it.
-	 */
-	if (priv->bt_sco_active) {
-		struct iwlagn_bt_sco_cmd sco_cmd = { .flags = 0 };
-
-		if (priv->bt_sco_active)
-			sco_cmd.flags |= IWLAGN_BT_SCO_ACTIVE;
-		if (iwl_send_cmd_pdu(priv, REPLY_BT_COEX_SCO,
-				     sizeof(sco_cmd), &sco_cmd))
-			IWL_ERR(priv, "failed to send BT SCO command\n");
-	}
 }
 
 static void iwlagn_bt_traffic_change_work(struct work_struct *work)
@@ -2038,7 +2023,6 @@ void iwlagn_bt_coex_profile_notif(struct iwl_priv *priv,
 	unsigned long flags;
 	struct iwl_rx_packet *pkt = rxb_addr(rxb);
 	struct iwl_bt_coex_profile_notif *coex = &pkt->u.bt_coex_profile_notif;
-	struct iwlagn_bt_sco_cmd sco_cmd = { .flags = 0 };
 	struct iwl_bt_uart_msg *uart_msg = &coex->last_bt_uart_msg;
 
 	IWL_DEBUG_NOTIF(priv, "BT Coex notification:\n");
@@ -2069,15 +2053,6 @@ void iwlagn_bt_coex_profile_notif(struct iwl_priv *priv,
 			queue_work(priv->workqueue,
 				   &priv->bt_traffic_change_work);
 		}
-		if (priv->bt_sco_active !=
-		    (uart_msg->frame3 & BT_UART_MSG_FRAME3SCOESCO_MSK)) {
-			priv->bt_sco_active = uart_msg->frame3 &
-				BT_UART_MSG_FRAME3SCOESCO_MSK;
-			if (priv->bt_sco_active)
-				sco_cmd.flags |= IWLAGN_BT_SCO_ACTIVE;
-			iwl_send_cmd_pdu_async(priv, REPLY_BT_COEX_SCO,
-				       sizeof(sco_cmd), &sco_cmd, NULL);
-		}
 	}
 
 	iwlagn_set_kill_msk(priv, uart_msg);

drivers/net/wireless/iwlwifi/iwl-agn-rs.c

@@ -179,31 +179,31 @@ static s32 expected_tpt_legacy[IWL_RATE_COUNT] = {
 };
 
 static s32 expected_tpt_siso20MHz[4][IWL_RATE_COUNT] = {
-	{0, 0, 0, 0, 42, 0,  76, 102, 124, 158, 183, 193, 202}, /* Norm */
-	{0, 0, 0, 0, 46, 0,  82, 110, 132, 167, 192, 202, 210}, /* SGI */
-	{0, 0, 0, 0, 48, 0,  93, 135, 176, 251, 319, 351, 381}, /* AGG */
-	{0, 0, 0, 0, 53, 0, 102, 149, 193, 275, 348, 381, 413}, /* AGG+SGI */
+	{0, 0, 0, 0, 42, 0,  76, 102, 124, 159, 183, 193, 202}, /* Norm */
+	{0, 0, 0, 0, 46, 0,  82, 110, 132, 168, 192, 202, 210}, /* SGI */
+	{0, 0, 0, 0, 47, 0,  91, 133, 171, 242, 305, 334, 362}, /* AGG */
+	{0, 0, 0, 0, 52, 0, 101, 145, 187, 264, 330, 361, 390}, /* AGG+SGI */
 };
 
 static s32 expected_tpt_siso40MHz[4][IWL_RATE_COUNT] = {
 	{0, 0, 0, 0,  77, 0, 127, 160, 184, 220, 242, 250, 257}, /* Norm */
 	{0, 0, 0, 0,  83, 0, 135, 169, 193, 229, 250, 257, 264}, /* SGI */
-	{0, 0, 0, 0,  96, 0, 182, 259, 328, 451, 553, 598, 640}, /* AGG */
-	{0, 0, 0, 0, 106, 0, 199, 282, 357, 487, 593, 640, 683}, /* AGG+SGI */
+	{0, 0, 0, 0,  94, 0, 177, 249, 313, 423, 512, 550, 586}, /* AGG */
+	{0, 0, 0, 0, 104, 0, 193, 270, 338, 454, 545, 584, 620}, /* AGG+SGI */
 };
 
 static s32 expected_tpt_mimo2_20MHz[4][IWL_RATE_COUNT] = {
-	{0, 0, 0, 0,  74, 0, 123, 155, 179, 213, 235, 243, 250}, /* Norm */
-	{0, 0, 0, 0,  81, 0, 131, 164, 187, 221, 242, 250, 256}, /* SGI */
-	{0, 0, 0, 0,  92, 0, 175, 250, 317, 436, 534, 578, 619}, /* AGG */
-	{0, 0, 0, 0, 102, 0, 192, 273, 344, 470, 573, 619, 660}, /* AGG+SGI*/
+	{0, 0, 0, 0,  74, 0, 123, 155, 179, 214, 236, 244, 251}, /* Norm */
+	{0, 0, 0, 0,  81, 0, 131, 164, 188, 223, 243, 251, 257}, /* SGI */
+	{0, 0, 0, 0,  89, 0, 167, 235, 296, 402, 488, 526, 560}, /* AGG */
+	{0, 0, 0, 0,  97, 0, 182, 255, 320, 431, 520, 558, 593}, /* AGG+SGI*/
 };
 
 static s32 expected_tpt_mimo2_40MHz[4][IWL_RATE_COUNT] = {
 	{0, 0, 0, 0, 123, 0, 182, 214, 235, 264, 279, 285, 289}, /* Norm */
 	{0, 0, 0, 0, 131, 0, 191, 222, 242, 270, 284, 289, 293}, /* SGI */
-	{0, 0, 0, 0, 180, 0, 327, 446, 545, 708, 828, 878, 922}, /* AGG */
-	{0, 0, 0, 0, 197, 0, 355, 481, 584, 752, 872, 922, 966}, /* AGG+SGI */
+	{0, 0, 0, 0, 171, 0, 305, 410, 496, 634, 731, 771, 805}, /* AGG */
+	{0, 0, 0, 0, 186, 0, 329, 439, 527, 667, 764, 803, 838}, /* AGG+SGI */
 };
 
 static s32 expected_tpt_mimo3_20MHz[4][IWL_RATE_COUNT] = {
@@ -2890,6 +2890,8 @@ static void rs_fill_link_cmd(struct iwl_priv *priv,
 	u8 ant_toggle_cnt = 0;
 	u8 use_ht_possible = 1;
 	u8 valid_tx_ant = 0;
+	struct iwl_station_priv *sta_priv =
+		container_of(lq_sta, struct iwl_station_priv, lq_sta);
 	struct iwl_link_quality_cmd *lq_cmd = &lq_sta->lq;
 
 	/* Override starting rate (index 0) if needed for debug purposes */
@@ -3008,7 +3010,8 @@ static void rs_fill_link_cmd(struct iwl_priv *priv,
 		repeat_rate--;
 	}
 
-	lq_cmd->agg_params.agg_frame_cnt_limit = LINK_QUAL_AGG_FRAME_LIMIT_DEF;
+	lq_cmd->agg_params.agg_frame_cnt_limit =
+		sta_priv->max_agg_bufsize ?: LINK_QUAL_AGG_FRAME_LIMIT_DEF;
 	lq_cmd->agg_params.agg_dis_start_th = LINK_QUAL_AGG_DISABLE_START_DEF;
 
 	lq_cmd->agg_params.agg_time_limit =

drivers/net/wireless/iwlwifi/iwl-agn-ucode.c

@@ -308,14 +308,6 @@ void iwlagn_init_alive_start(struct iwl_priv *priv)
 {
 	int ret = 0;
 
-	/* Check alive response for "valid" sign from uCode */
-	if (priv->card_alive_init.is_valid != UCODE_VALID_OK) {
-		/* We had an error bringing up the hardware, so take it
-		 * all the way back down so we can try again */
-		IWL_DEBUG_INFO(priv, "Initialize Alive failed.\n");
-		goto restart;
-	}
-
 	/* initialize uCode was loaded... verify inst image.
 	 * This is a paranoid check, because we would not have gotten the
 	 * "initialize" alive if code weren't properly loaded.  */

drivers/net/wireless/iwlwifi/iwl-agn.c

@@ -462,8 +462,12 @@ static void iwl_rx_reply_alive(struct iwl_priv *priv,
 	if (palive->is_valid == UCODE_VALID_OK)
 		queue_delayed_work(priv->workqueue, pwork,
 				   msecs_to_jiffies(5));
-	else
-		IWL_WARN(priv, "uCode did not respond OK.\n");
+	else {
+		IWL_WARN(priv, "%s uCode did not respond OK.\n",
+			(palive->ver_subtype == INITIALIZE_SUBTYPE) ?
+			"init" : "runtime");
+		queue_work(priv->workqueue, &priv->restart);
+	}
 }
 
 static void iwl_bg_beacon_update(struct work_struct *work)
@@ -700,18 +704,18 @@ static void iwl_bg_ucode_trace(unsigned long data)
 	}
 }
 
-static void iwl_rx_beacon_notif(struct iwl_priv *priv,
-				struct iwl_rx_mem_buffer *rxb)
+static void iwlagn_rx_beacon_notif(struct iwl_priv *priv,
+				   struct iwl_rx_mem_buffer *rxb)
 {
 	struct iwl_rx_packet *pkt = rxb_addr(rxb);
-	struct iwl4965_beacon_notif *beacon =
-		(struct iwl4965_beacon_notif *)pkt->u.raw;
+	struct iwlagn_beacon_notif *beacon = (void *)pkt->u.raw;
 #ifdef CONFIG_IWLWIFI_DEBUG
+	u16 status = le16_to_cpu(beacon->beacon_notify_hdr.status.status);
 	u8 rate = iwl_hw_get_rate(beacon->beacon_notify_hdr.rate_n_flags);
 
-	IWL_DEBUG_RX(priv, "beacon status %x retries %d iss %d "
-		"tsf %d %d rate %d\n",
-		le32_to_cpu(beacon->beacon_notify_hdr.u.status) & TX_STATUS_MSK,
+	IWL_DEBUG_RX(priv, "beacon status %#x, retries:%d ibssmgr:%d "
+		"tsf:0x%.8x%.8x rate:%d\n",
+		status & TX_STATUS_MSK,
 		beacon->beacon_notify_hdr.failure_frame,
 		le32_to_cpu(beacon->ibss_mgr_status),
 		le32_to_cpu(beacon->high_tsf),
@@ -814,7 +818,7 @@ static void iwl_setup_rx_handlers(struct iwl_priv *priv)
 	priv->rx_handlers[PM_SLEEP_NOTIFICATION] = iwl_rx_pm_sleep_notif;
 	priv->rx_handlers[PM_DEBUG_STATISTIC_NOTIFIC] =
 	    iwl_rx_pm_debug_statistics_notif;
-	priv->rx_handlers[BEACON_NOTIFICATION] = iwl_rx_beacon_notif;
+	priv->rx_handlers[BEACON_NOTIFICATION] = iwlagn_rx_beacon_notif;
 
 	/*
 	 * The same handler is used for both the REPLY to a discrete
@@ -2648,13 +2652,6 @@ static void iwl_alive_start(struct iwl_priv *priv)
 
 	IWL_DEBUG_INFO(priv, "Runtime Alive received.\n");
 
-	if (priv->card_alive.is_valid != UCODE_VALID_OK) {
-		/* We had an error bringing up the hardware, so take it
-		 * all the way back down so we can try again */
-		IWL_DEBUG_INFO(priv, "Alive failed.\n");
-		goto restart;
-	}
-
 	/* Initialize uCode has loaded Runtime uCode ... verify inst image.
 	 * This is a paranoid check, because we would not have gotten the
 	 * "runtime" alive if code weren't properly loaded.  */
@@ -2783,7 +2780,6 @@ static void __iwl_down(struct iwl_priv *priv)
 			 priv->cfg->bt_params->bt_init_traffic_load;
 	else
 		priv->bt_traffic_load = 0;
-	priv->bt_sco_active = false;
 	priv->bt_full_concurrent = false;
 	priv->bt_ci_compliance = 0;
 
@@ -3102,7 +3098,7 @@ static void iwl_bg_restart(struct work_struct *data)
 
 	if (test_and_clear_bit(STATUS_FW_ERROR, &priv->status)) {
 		struct iwl_rxon_context *ctx;
-		bool bt_sco, bt_full_concurrent;
+		bool bt_full_concurrent;
 		u8 bt_ci_compliance;
 		u8 bt_load;
 		u8 bt_status;
@@ -3121,7 +3117,6 @@ static void iwl_bg_restart(struct work_struct *data)
 		 * re-configure the hw when we reconfigure the BT
 		 * command.
 		 */
-		bt_sco = priv->bt_sco_active;
 		bt_full_concurrent = priv->bt_full_concurrent;
 		bt_ci_compliance = priv->bt_ci_compliance;
 		bt_load = priv->bt_traffic_load;
@@ -3129,7 +3124,6 @@ static void iwl_bg_restart(struct work_struct *data)
 
 		__iwl_down(priv);
 
-		priv->bt_sco_active = bt_sco;
 		priv->bt_full_concurrent = bt_full_concurrent;
 		priv->bt_ci_compliance = bt_ci_compliance;
 		priv->bt_traffic_load = bt_load;
@@ -3191,6 +3185,8 @@ static int iwl_mac_setup_register(struct iwl_priv *priv,
 		    IEEE80211_HW_SPECTRUM_MGMT |
 		    IEEE80211_HW_REPORTS_TX_ACK_STATUS;
 
+	hw->max_tx_aggregation_subframes = LINK_QUAL_AGG_FRAME_LIMIT_DEF;
+
 	if (!priv->cfg->base_params->broken_powersave)
 		hw->flags |= IEEE80211_HW_SUPPORTS_PS |
 			     IEEE80211_HW_SUPPORTS_DYNAMIC_PS;
@@ -3210,7 +3206,8 @@ static int iwl_mac_setup_register(struct iwl_priv *priv,
 	hw->wiphy->max_remain_on_channel_duration = 1000;
 
 	hw->wiphy->flags |= WIPHY_FLAG_CUSTOM_REGULATORY |
-			    WIPHY_FLAG_DISABLE_BEACON_HINTS;
+			    WIPHY_FLAG_DISABLE_BEACON_HINTS |
+			    WIPHY_FLAG_IBSS_RSN;
 
 	/*
 	 * For now, disable PS by default because it affects
@@ -3362,6 +3359,14 @@ int iwlagn_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
 		return -EOPNOTSUPP;
 	}
 
+	/*
+	 * To support IBSS RSN, don't program group keys in IBSS, the
+	 * hardware will then not attempt to decrypt the frames.
+	 */
+	if (vif->type == NL80211_IFTYPE_ADHOC &&
+	    !(key->flags & IEEE80211_KEY_FLAG_PAIRWISE))
+		return -EOPNOTSUPP;
+
 	sta_id = iwl_sta_id_or_broadcast(priv, vif_priv->ctx, sta);
 	if (sta_id == IWL_INVALID_STATION)
 		return -EINVAL;
@@ -3421,6 +3426,7 @@ int iwlagn_mac_ampdu_action(struct ieee80211_hw *hw,
 {
 	struct iwl_priv *priv = hw->priv;
 	int ret = -EINVAL;
+	struct iwl_station_priv *sta_priv = (void *) sta->drv_priv;
 
 	IWL_DEBUG_HT(priv, "A-MPDU action on addr %pM tid %d\n",
 		     sta->addr, tid);
@@ -3475,11 +3481,28 @@ int iwlagn_mac_ampdu_action(struct ieee80211_hw *hw,
 		}
 		break;
 	case IEEE80211_AMPDU_TX_OPERATIONAL:
+		/*
+		 * If the limit is 0, then it wasn't initialised yet,
+		 * use the default. We can do that since we take the
+		 * minimum below, and we don't want to go above our
+		 * default due to hardware restrictions.
+		 */
+		if (sta_priv->max_agg_bufsize == 0)
+			sta_priv->max_agg_bufsize =
+				LINK_QUAL_AGG_FRAME_LIMIT_DEF;
+
+		/*
+		 * Even though in theory the peer could have different
+		 * aggregation reorder buffer sizes for different sessions,
+		 * our ucode doesn't allow for that and has a global limit
+		 * for each station. Therefore, use the minimum of all the
+		 * aggregation sessions and our default value.
+		 */
+		sta_priv->max_agg_bufsize =
+			min(sta_priv->max_agg_bufsize, buf_size);
+
 		if (priv->cfg->ht_params &&
 		    priv->cfg->ht_params->use_rts_for_aggregation) {
-			struct iwl_station_priv *sta_priv =
-				(void *) sta->drv_priv;
-
 			/*
 			 * switch to RTS/CTS if it is the prefer protection
 			 * method for HT traffic
@@ -3487,9 +3510,13 @@ int iwlagn_mac_ampdu_action(struct ieee80211_hw *hw,
 
 			sta_priv->lq_sta.lq.general_params.flags |=
 				LINK_QUAL_FLAGS_SET_STA_TLC_RTS_MSK;
-			iwl_send_lq_cmd(priv, iwl_rxon_ctx_from_vif(vif),
-					&sta_priv->lq_sta.lq, CMD_ASYNC, false);
 		}
+
+		sta_priv->lq_sta.lq.agg_params.agg_frame_cnt_limit =
+			sta_priv->max_agg_bufsize;
+
+		iwl_send_lq_cmd(priv, iwl_rxon_ctx_from_vif(vif),
+				&sta_priv->lq_sta.lq, CMD_ASYNC, false);
 		ret = 0;
 		break;
 	}

drivers/net/wireless/iwlwifi/iwl-commands.h

@@ -178,7 +178,6 @@ enum {
 	REPLY_BT_COEX_PRIO_TABLE = 0xcc,
 	REPLY_BT_COEX_PROT_ENV = 0xcd,
 	REPLY_BT_COEX_PROFILE_NOTIF = 0xce,
-	REPLY_BT_COEX_SCO = 0xcf,
 
 	/* PAN commands */
 	REPLY_WIPAN_PARAMS = 0xb2,
@@ -3083,6 +3082,13 @@ struct iwl4965_beacon_notif {
 	__le32 ibss_mgr_status;
 } __packed;
 
+struct iwlagn_beacon_notif {
+	struct iwlagn_tx_resp beacon_notify_hdr;
+	__le32 low_tsf;
+	__le32 high_tsf;
+	__le32 ibss_mgr_status;
+} __packed;
+
 /*
  * REPLY_TX_BEACON = 0x91 (command, has simple generic response)
  */

drivers/net/wireless/iwlwifi/iwl-core.h

@@ -305,7 +305,6 @@ struct iwl_base_params {
 	u16 led_compensation;
 	const bool broken_powersave;
 	int chain_noise_num_beacons;
-	const bool supports_idle;
 	bool adv_thermal_throttle;
 	bool support_ct_kill_exit;
 	const bool support_wimax_coexist;
@@ -364,6 +363,7 @@ struct iwl_ht_params {
  * @adv_pm: advance power management
  * @rx_with_siso_diversity: 1x1 device with rx antenna diversity
  * @internal_wimax_coex: internal wifi/wimax combo device
+ * @iq_invert: I/Q inversion
  *
  * We enable the driver to be backward compatible wrt API version. The
  * driver specifies which APIs it supports (with @ucode_api_max being the
@@ -413,6 +413,7 @@ struct iwl_cfg {
 	const bool adv_pm;
 	const bool rx_with_siso_diversity;
 	const bool internal_wimax_coex;
+	const bool iq_invert;
 };
 
 /***************************

drivers/net/wireless/iwlwifi/iwl-csr.h

@@ -382,6 +382,8 @@
 #define CSR_GP_DRIVER_REG_BIT_CALIB_VERSION6	    (0x00000004)
 #define CSR_GP_DRIVER_REG_BIT_6050_1x2		    (0x00000008)
 
+#define CSR_GP_DRIVER_REG_BIT_RADIO_IQ_INVER	    (0x00000080)
+
 /* GIO Chicken Bits (PCI Express bus link power management) */
 #define CSR_GIO_CHICKEN_BITS_REG_BIT_L1A_NO_L0S_RX  (0x00800000)
 #define CSR_GIO_CHICKEN_BITS_REG_BIT_DIS_L0S_EXIT_TIMER  (0x20000000)

drivers/net/wireless/iwlwifi/iwl-debugfs.c

@@ -1587,10 +1587,9 @@ static ssize_t iwl_dbgfs_bt_traffic_read(struct file *file,
 			 "last traffic notif: %d\n",
 		priv->bt_status ? "On" : "Off", priv->last_bt_traffic_load);
 	pos += scnprintf(buf + pos, bufsz - pos, "ch_announcement: %d, "
-			 "sco_active: %d, kill_ack_mask: %x, "
-			 "kill_cts_mask: %x\n",
-		priv->bt_ch_announce, priv->bt_sco_active,
-		priv->kill_ack_mask, priv->kill_cts_mask);
+			 "kill_ack_mask: %x, kill_cts_mask: %x\n",
+		priv->bt_ch_announce, priv->kill_ack_mask,
+		priv->kill_cts_mask);
 
 	pos += scnprintf(buf + pos, bufsz - pos, "bluetooth traffic load: ");
 	switch (priv->bt_traffic_load) {

drivers/net/wireless/iwlwifi/iwl-dev.h

@@ -509,6 +509,7 @@ struct iwl_station_priv {
 	atomic_t pending_frames;
 	bool client;
 	bool asleep;
+	u8 max_agg_bufsize;
 };
 
 /**
@@ -1503,7 +1504,6 @@ struct iwl_priv {
 	u8 bt_status;
 	u8 bt_traffic_load, last_bt_traffic_load;
 	bool bt_ch_announce;
-	bool bt_sco_active;
 	bool bt_full_concurrent;
 	bool bt_ant_couple_ok;
 	__le32 kill_ack_mask;

drivers/net/wireless/iwlwifi/iwl-power.c

@@ -356,8 +356,7 @@ static void iwl_power_build_cmd(struct iwl_priv *priv,
 
 	if (priv->cfg->base_params->broken_powersave)
 		iwl_power_sleep_cam_cmd(priv, cmd);
-	else if (priv->cfg->base_params->supports_idle &&
-		 priv->hw->conf.flags & IEEE80211_CONF_IDLE)
+	else if (priv->hw->conf.flags & IEEE80211_CONF_IDLE)
 		iwl_static_sleep_cmd(priv, cmd, IWL_POWER_INDEX_5, 20);
 	else if (priv->cfg->ops->lib->tt_ops.lower_power_detection &&
 		 priv->cfg->ops->lib->tt_ops.tt_power_mode &&

drivers/net/wireless/iwlwifi/iwl3945-base.c

@@ -3286,6 +3286,14 @@ static int iwl3945_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
 		return -EOPNOTSUPP;
 	}
 
+	/*
+	 * To support IBSS RSN, don't program group keys in IBSS, the
+	 * hardware will then not attempt to decrypt the frames.
+	 */
+	if (vif->type == NL80211_IFTYPE_ADHOC &&
+	    !(key->flags & IEEE80211_KEY_FLAG_PAIRWISE))
+		return -EOPNOTSUPP;
+
 	static_key = !iwl_is_associated(priv, IWL_RXON_CTX_BSS);
 
 	if (!static_key) {
@@ -3915,7 +3923,8 @@ static int iwl3945_setup_mac(struct iwl_priv *priv)
 		priv->contexts[IWL_RXON_CTX_BSS].interface_modes;
 
 	hw->wiphy->flags |= WIPHY_FLAG_CUSTOM_REGULATORY |
-			    WIPHY_FLAG_DISABLE_BEACON_HINTS;
+			    WIPHY_FLAG_DISABLE_BEACON_HINTS |
+			    WIPHY_FLAG_IBSS_RSN;
 
 	hw->wiphy->max_scan_ssids = PROBE_OPTION_MAX_3945;
 	/* we create the 802.11 header and a zero-length SSID element */