Merge branch 'next-samsung-devel' into next-samsung-devel-2

Conflicts:
	arch/arm/mach-exynos4/clock.c
	arch/arm/mach-s3c2412/gpio.c
	arch/arm/mach-s5p64x0/dma.c
	arch/arm/mach-s5p64x0/gpiolib.c

arch/arm/Kconfig

@@ -724,9 +724,6 @@ config ARCH_S3C64XX
 	select SAMSUNG_IRQ_VIC_TIMER
 	select SAMSUNG_IRQ_UART
 	select S3C_GPIO_TRACK
-	select S3C_GPIO_PULL_UPDOWN
-	select S3C_GPIO_CFG_S3C24XX
-	select S3C_GPIO_CFG_S3C64XX
 	select S3C_DEV_NAND
 	select USB_ARCH_HAS_OHCI
 	select SAMSUNG_GPIOLIB_4BIT

arch/arm/include/asm/hardware/pl080.h

@@ -21,6 +21,9 @@
  * OneNAND features.
 */
 
+#ifndef ASM_PL080_H
+#define ASM_PL080_H
+
 #define PL080_INT_STATUS			(0x00)
 #define PL080_TC_STATUS				(0x04)
 #define PL080_TC_CLEAR				(0x08)
@@ -138,3 +141,4 @@ struct pl080s_lli {
 	u32	control1;
 };
 
+#endif /* ASM_PL080_H */

arch/arm/mach-exynos4/Kconfig

@@ -11,7 +11,7 @@ if ARCH_EXYNOS4
 
 config CPU_EXYNOS4210
 	bool
-	select S3C_PL330_DMA
+	select SAMSUNG_DMADEV
 	help
 	  Enable EXYNOS4210 CPU support
 
@@ -131,6 +131,14 @@ config MACH_SMDKV310
 	select S3C_DEV_RTC
 	select S3C_DEV_WDT
 	select S3C_DEV_I2C1
+	select S5P_DEV_FIMC0
+	select S5P_DEV_FIMC1
+	select S5P_DEV_FIMC2
+	select S5P_DEV_FIMC3
+	select S5P_DEV_I2C_HDMIPHY
+	select S5P_DEV_MFC
+	select S5P_DEV_TV
+	select S5P_DEV_USB_EHCI
 	select S3C_DEV_HSMMC
 	select S3C_DEV_HSMMC1
 	select S3C_DEV_HSMMC2
@@ -145,6 +153,7 @@ config MACH_SMDKV310
 	select EXYNOS4_SETUP_I2C1
 	select EXYNOS4_SETUP_KEYPAD
 	select EXYNOS4_SETUP_SDHCI
+	select EXYNOS4_SETUP_USB_PHY
 	help
 	  Machine support for Samsung SMDKV310
 
@@ -170,19 +179,26 @@ config MACH_UNIVERSAL_C210
 	select S5P_DEV_FIMC1
 	select S5P_DEV_FIMC2
 	select S5P_DEV_FIMC3
+	select S5P_DEV_CSIS0
+	select S5P_DEV_FIMD0
 	select S3C_DEV_HSMMC
 	select S3C_DEV_HSMMC2
 	select S3C_DEV_HSMMC3
 	select S3C_DEV_I2C1
 	select S3C_DEV_I2C3
 	select S3C_DEV_I2C5
+	select S5P_DEV_I2C_HDMIPHY
 	select S5P_DEV_MFC
 	select S5P_DEV_ONENAND
+	select S5P_DEV_TV
 	select EXYNOS4_DEV_PD
+	select EXYNOS4_SETUP_FIMD0
 	select EXYNOS4_SETUP_I2C1
 	select EXYNOS4_SETUP_I2C3
 	select EXYNOS4_SETUP_I2C5
 	select EXYNOS4_SETUP_SDHCI
+	select EXYNOS4_SETUP_FIMC
+	select S5P_SETUP_MIPIPHY
 	help
 	  Machine support for Samsung Mobile Universal S5PC210 Reference
 	  Board.
@@ -191,6 +207,8 @@ config MACH_NURI
 	bool "Mobile NURI Board"
 	select CPU_EXYNOS4210
 	select S3C_DEV_WDT
+	select S3C_DEV_RTC
+	select S5P_DEV_FIMD0
 	select S3C_DEV_HSMMC
 	select S3C_DEV_HSMMC2
 	select S3C_DEV_HSMMC3
@@ -200,6 +218,7 @@ config MACH_NURI
 	select S5P_DEV_MFC
 	select S5P_DEV_USB_EHCI
 	select EXYNOS4_DEV_PD
+	select EXYNOS4_SETUP_FIMD0
 	select EXYNOS4_SETUP_I2C1
 	select EXYNOS4_SETUP_I2C3
 	select EXYNOS4_SETUP_I2C5
@@ -215,8 +234,22 @@ config MACH_ORIGEN
 	select CPU_EXYNOS4210
 	select S3C_DEV_RTC
 	select S3C_DEV_WDT
+	select S3C_DEV_HSMMC
 	select S3C_DEV_HSMMC2
+	select S5P_DEV_FIMC0
+	select S5P_DEV_FIMC1
+	select S5P_DEV_FIMC2
+	select S5P_DEV_FIMC3
+	select S5P_DEV_FIMD0
+	select S5P_DEV_I2C_HDMIPHY
+	select S5P_DEV_TV
+	select S5P_DEV_USB_EHCI
+	select EXYNOS4_DEV_PD
+	select SAMSUNG_DEV_BACKLIGHT
+	select SAMSUNG_DEV_PWM
+	select EXYNOS4_SETUP_FIMD0
 	select EXYNOS4_SETUP_SDHCI
+	select EXYNOS4_SETUP_USB_PHY
 	help
 	  Machine support for ORIGEN based on Samsung EXYNOS4210
 

arch/arm/mach-exynos4/clock.c

@@ -111,6 +111,11 @@ struct clk clk_sclk_usbphy1 = {
 	.name		= "sclk_usbphy1",
 };
 
+static struct clk dummy_apb_pclk = {
+	.name		= "apb_pclk",
+	.id		= -1,
+};
+
 static int exynos4_clksrc_mask_top_ctrl(struct clk *clk, int enable)
 {
 	return s5p_gatectrl(S5P_CLKSRC_MASK_TOP, clk, enable);
@@ -146,6 +151,11 @@ static int exynos4_clk_ip_mfc_ctrl(struct clk *clk, int enable)
 	return s5p_gatectrl(S5P_CLKGATE_IP_MFC, clk, enable);
 }
 
+static int exynos4_clksrc_mask_tv_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P_CLKSRC_MASK_TV, clk, enable);
+}
+
 static int exynos4_clk_ip_cam_ctrl(struct clk *clk, int enable)
 {
 	return s5p_gatectrl(S5P_CLKGATE_IP_CAM, clk, enable);
@@ -186,6 +196,16 @@ static int exynos4_clk_ip_perir_ctrl(struct clk *clk, int enable)
 	return s5p_gatectrl(S5P_CLKGATE_IP_PERIR, clk, enable);
 }
 
+static int exynos4_clk_hdmiphy_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P_HDMI_PHY_CONTROL, clk, enable);
+}
+
+static int exynos4_clk_dac_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P_DAC_PHY_CONTROL, clk, enable);
+}
+
 /* Core list of CMU_CPU side */
 
 static struct clksrc_clk clk_mout_apll = {
@@ -503,13 +523,48 @@ static struct clk init_clocks_off[] = {
 		.enable		= exynos4_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 9),
 	}, {
-		.name		= "pdma",
-		.devname	= "s3c-pl330.0",
+		.name		= "dac",
+		.devname	= "s5p-sdo",
+		.enable		= exynos4_clk_ip_tv_ctrl,
+		.ctrlbit	= (1 << 2),
+	}, {
+		.name		= "mixer",
+		.devname	= "s5p-mixer",
+		.enable		= exynos4_clk_ip_tv_ctrl,
+		.ctrlbit	= (1 << 1),
+	}, {
+		.name		= "vp",
+		.devname	= "s5p-mixer",
+		.enable		= exynos4_clk_ip_tv_ctrl,
+		.ctrlbit	= (1 << 0),
+	}, {
+		.name		= "hdmi",
+		.devname	= "exynos4-hdmi",
+		.enable		= exynos4_clk_ip_tv_ctrl,
+		.ctrlbit	= (1 << 3),
+	}, {
+		.name		= "hdmiphy",
+		.devname	= "exynos4-hdmi",
+		.enable		= exynos4_clk_hdmiphy_ctrl,
+		.ctrlbit	= (1 << 0),
+	}, {
+		.name		= "dacphy",
+		.devname	= "s5p-sdo",
+		.enable		= exynos4_clk_dac_ctrl,
+		.ctrlbit	= (1 << 0),
+	}, {
+		.name		= "sata",
+		.parent		= &clk_aclk_133.clk,
+		.enable		= exynos4_clk_ip_fsys_ctrl,
+		.ctrlbit	= (1 << 10),
+	}, {
+		.name		= "dma",
+		.devname	= "dma-pl330.0",
 		.enable		= exynos4_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 0),
 	}, {
-		.name		= "pdma",
-		.devname	= "s3c-pl330.1",
+		.name		= "dma",
+		.devname	= "dma-pl330.1",
 		.enable		= exynos4_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 1),
 	}, {
@@ -629,6 +684,12 @@ static struct clk init_clocks_off[] = {
 		.parent		= &clk_aclk_100.clk,
 		.enable		= exynos4_clk_ip_peril_ctrl,
 		.ctrlbit	= (1 << 13),
+	}, {
+		.name		= "i2c",
+		.devname	= "s3c2440-hdmiphy-i2c",
+		.parent		= &clk_aclk_100.clk,
+		.enable		= exynos4_clk_ip_peril_ctrl,
+		.ctrlbit	= (1 << 14),
 	}, {
 		.name		= "SYSMMU_MDMA",
 		.enable		= exynos4_clk_ip_image_ctrl,
@@ -831,6 +892,81 @@ static struct clksrc_sources clkset_mout_mfc = {
 	.nr_sources	= ARRAY_SIZE(clkset_mout_mfc_list),
 };
 
+static struct clk *clkset_sclk_dac_list[] = {
+	[0] = &clk_sclk_vpll.clk,
+	[1] = &clk_sclk_hdmiphy,
+};
+
+static struct clksrc_sources clkset_sclk_dac = {
+	.sources	= clkset_sclk_dac_list,
+	.nr_sources	= ARRAY_SIZE(clkset_sclk_dac_list),
+};
+
+static struct clksrc_clk clk_sclk_dac = {
+	.clk		= {
+		.name		= "sclk_dac",
+		.enable		= exynos4_clksrc_mask_tv_ctrl,
+		.ctrlbit	= (1 << 8),
+	},
+	.sources = &clkset_sclk_dac,
+	.reg_src = { .reg = S5P_CLKSRC_TV, .shift = 8, .size = 1 },
+};
+
+static struct clksrc_clk clk_sclk_pixel = {
+	.clk		= {
+		.name		= "sclk_pixel",
+		.parent = &clk_sclk_vpll.clk,
+	},
+	.reg_div = { .reg = S5P_CLKDIV_TV, .shift = 0, .size = 4 },
+};
+
+static struct clk *clkset_sclk_hdmi_list[] = {
+	[0] = &clk_sclk_pixel.clk,
+	[1] = &clk_sclk_hdmiphy,
+};
+
+static struct clksrc_sources clkset_sclk_hdmi = {
+	.sources	= clkset_sclk_hdmi_list,
+	.nr_sources	= ARRAY_SIZE(clkset_sclk_hdmi_list),
+};
+
+static struct clksrc_clk clk_sclk_hdmi = {
+	.clk		= {
+		.name		= "sclk_hdmi",
+		.enable		= exynos4_clksrc_mask_tv_ctrl,
+		.ctrlbit	= (1 << 0),
+	},
+	.sources = &clkset_sclk_hdmi,
+	.reg_src = { .reg = S5P_CLKSRC_TV, .shift = 0, .size = 1 },
+};
+
+static struct clk *clkset_sclk_mixer_list[] = {
+	[0] = &clk_sclk_dac.clk,
+	[1] = &clk_sclk_hdmi.clk,
+};
+
+static struct clksrc_sources clkset_sclk_mixer = {
+	.sources	= clkset_sclk_mixer_list,
+	.nr_sources	= ARRAY_SIZE(clkset_sclk_mixer_list),
+};
+
+static struct clksrc_clk clk_sclk_mixer = {
+	.clk		= {
+		.name		= "sclk_mixer",
+		.enable		= exynos4_clksrc_mask_tv_ctrl,
+		.ctrlbit	= (1 << 4),
+	},
+	.sources = &clkset_sclk_mixer,
+	.reg_src = { .reg = S5P_CLKSRC_TV, .shift = 4, .size = 1 },
+};
+
+static struct clksrc_clk *sclk_tv[] = {
+	&clk_sclk_dac,
+	&clk_sclk_pixel,
+	&clk_sclk_hdmi,
+	&clk_sclk_mixer,
+};
+
 static struct clksrc_clk clk_dout_mmc0 = {
 	.clk		= {
 		.name		= "dout_mmc0",
@@ -1157,6 +1293,71 @@ static struct clk_ops exynos4_fout_apll_ops = {
 	.get_rate = exynos4_fout_apll_get_rate,
 };
 
+static u32 vpll_div[][8] = {
+	{  54000000, 3, 53, 3, 1024, 0, 17, 0 },
+	{ 108000000, 3, 53, 2, 1024, 0, 17, 0 },
+};
+
+static unsigned long exynos4_vpll_get_rate(struct clk *clk)
+{
+	return clk->rate;
+}
+
+static int exynos4_vpll_set_rate(struct clk *clk, unsigned long rate)
+{
+	unsigned int vpll_con0, vpll_con1 = 0;
+	unsigned int i;
+
+	/* Return if nothing changed */
+	if (clk->rate == rate)
+		return 0;
+
+	vpll_con0 = __raw_readl(S5P_VPLL_CON0);
+	vpll_con0 &= ~(0x1 << 27 |					\
+			PLL90XX_MDIV_MASK << PLL46XX_MDIV_SHIFT |	\
+			PLL90XX_PDIV_MASK << PLL46XX_PDIV_SHIFT |	\
+			PLL90XX_SDIV_MASK << PLL46XX_SDIV_SHIFT);
+
+	vpll_con1 = __raw_readl(S5P_VPLL_CON1);
+	vpll_con1 &= ~(PLL46XX_MRR_MASK << PLL46XX_MRR_SHIFT |	\
+			PLL46XX_MFR_MASK << PLL46XX_MFR_SHIFT |	\
+			PLL4650C_KDIV_MASK << PLL46XX_KDIV_SHIFT);
+
+	for (i = 0; i < ARRAY_SIZE(vpll_div); i++) {
+		if (vpll_div[i][0] == rate) {
+			vpll_con0 |= vpll_div[i][1] << PLL46XX_PDIV_SHIFT;
+			vpll_con0 |= vpll_div[i][2] << PLL46XX_MDIV_SHIFT;
+			vpll_con0 |= vpll_div[i][3] << PLL46XX_SDIV_SHIFT;
+			vpll_con1 |= vpll_div[i][4] << PLL46XX_KDIV_SHIFT;
+			vpll_con1 |= vpll_div[i][5] << PLL46XX_MFR_SHIFT;
+			vpll_con1 |= vpll_div[i][6] << PLL46XX_MRR_SHIFT;
+			vpll_con0 |= vpll_div[i][7] << 27;
+			break;
+		}
+	}
+
+	if (i == ARRAY_SIZE(vpll_div)) {
+		printk(KERN_ERR "%s: Invalid Clock VPLL Frequency\n",
+				__func__);
+		return -EINVAL;
+	}
+
+	__raw_writel(vpll_con0, S5P_VPLL_CON0);
+	__raw_writel(vpll_con1, S5P_VPLL_CON1);
+
+	/* Wait for VPLL lock */
+	while (!(__raw_readl(S5P_VPLL_CON0) & (1 << PLL46XX_LOCKED_SHIFT)))
+		continue;
+
+	clk->rate = rate;
+	return 0;
+}
+
+static struct clk_ops exynos4_vpll_ops = {
+	.get_rate = exynos4_vpll_get_rate,
+	.set_rate = exynos4_vpll_set_rate,
+};
+
 void __init_or_cpufreq exynos4_setup_clocks(void)
 {
 	struct clk *xtal_clk;
@@ -1214,6 +1415,7 @@ void __init_or_cpufreq exynos4_setup_clocks(void)
 	clk_fout_apll.ops = &exynos4_fout_apll_ops;
 	clk_fout_mpll.rate = mpll;
 	clk_fout_epll.rate = epll;
+	clk_fout_vpll.ops = &exynos4_vpll_ops;
 	clk_fout_vpll.rate = vpll;
 
 	printk(KERN_INFO "EXYNOS4: PLL settings, A=%ld, M=%ld, E=%ld V=%ld",
@@ -1241,7 +1443,10 @@ void __init_or_cpufreq exynos4_setup_clocks(void)
 }
 
 static struct clk *clks[] __initdata = {
-	/* Nothing here yet */
+	&clk_sclk_hdmi27m,
+	&clk_sclk_hdmiphy,
+	&clk_sclk_usbphy0,
+	&clk_sclk_usbphy1,
 };
 
 #ifdef CONFIG_PM_SLEEP
@@ -1275,6 +1480,9 @@ void __init exynos4_register_clocks(void)
 	for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++)
 		s3c_register_clksrc(sysclks[ptr], 1);
 
+	for (ptr = 0; ptr < ARRAY_SIZE(sclk_tv); ptr++)
+		s3c_register_clksrc(sclk_tv[ptr], 1);
+
 	s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
 	s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
 
@@ -1282,5 +1490,7 @@ void __init exynos4_register_clocks(void)
 	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
 
 	register_syscore_ops(&exynos4_clock_syscore_ops);
+	s3c24xx_register_clock(&dummy_apb_pclk);
+
 	s3c_pwmclk_init();
 }

arch/arm/mach-exynos4/cpu.c

@@ -28,6 +28,7 @@
 #include <plat/fimc-core.h>
 #include <plat/iic-core.h>
 #include <plat/reset.h>
+#include <plat/tv-core.h>
 
 #include <mach/regs-irq.h>
 #include <mach/regs-pmu.h>
@@ -180,6 +181,7 @@ void __init exynos4_map_io(void)
 	s3c_i2c2_setname("s3c2440-i2c");
 
 	s5p_fb_setname(0, "exynos4-fb");
+	s5p_hdmi_setname("exynos4-hdmi");
 }
 
 void __init exynos4_init_clocks(int xtal)

arch/arm/mach-exynos4/dma.c

@@ -21,151 +21,229 @@
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
-#include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/pl330.h>
 
+#include <asm/irq.h>
 #include <plat/devs.h>
 #include <plat/irqs.h>
 
 #include <mach/map.h>
 #include <mach/irqs.h>
-
-#include <plat/s3c-pl330-pdata.h>
+#include <mach/dma.h>
 
 static u64 dma_dmamask = DMA_BIT_MASK(32);
 
-static struct resource exynos4_pdma0_resource[] = {
-	[0] = {
-		.start	= EXYNOS4_PA_PDMA0,
-		.end	= EXYNOS4_PA_PDMA0 + SZ_4K,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_PDMA0,
-		.end	= IRQ_PDMA0,
-		.flags	= IORESOURCE_IRQ,
+struct dma_pl330_peri pdma0_peri[28] = {
+	{
+		.peri_id = (u8)DMACH_PCM0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_PCM0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_PCM2_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_PCM2_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_MSM_REQ0,
+	}, {
+		.peri_id = (u8)DMACH_MSM_REQ2,
+	}, {
+		.peri_id = (u8)DMACH_SPI0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_SPI0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_SPI2_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_SPI2_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_I2S0S_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_I2S0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_I2S0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_UART0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_UART2_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART2_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_UART4_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART4_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_SLIMBUS0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_SLIMBUS0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_SLIMBUS2_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_SLIMBUS2_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_SLIMBUS4_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_SLIMBUS4_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_AC97_MICIN,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_AC97_PCMIN,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_AC97_PCMOUT,
+		.rqtype = MEMTODEV,
 	},
 };
 
-static struct s3c_pl330_platdata exynos4_pdma0_pdata = {
-	.peri = {
-		[0] = DMACH_PCM0_RX,
-		[1] = DMACH_PCM0_TX,
-		[2] = DMACH_PCM2_RX,
-		[3] = DMACH_PCM2_TX,
-		[4] = DMACH_MSM_REQ0,
-		[5] = DMACH_MSM_REQ2,
-		[6] = DMACH_SPI0_RX,
-		[7] = DMACH_SPI0_TX,
-		[8] = DMACH_SPI2_RX,
-		[9] = DMACH_SPI2_TX,
-		[10] = DMACH_I2S0S_TX,
-		[11] = DMACH_I2S0_RX,
-		[12] = DMACH_I2S0_TX,
-		[13] = DMACH_I2S2_RX,
-		[14] = DMACH_I2S2_TX,
-		[15] = DMACH_UART0_RX,
-		[16] = DMACH_UART0_TX,
-		[17] = DMACH_UART2_RX,
-		[18] = DMACH_UART2_TX,
-		[19] = DMACH_UART4_RX,
-		[20] = DMACH_UART4_TX,
-		[21] = DMACH_SLIMBUS0_RX,
-		[22] = DMACH_SLIMBUS0_TX,
-		[23] = DMACH_SLIMBUS2_RX,
-		[24] = DMACH_SLIMBUS2_TX,
-		[25] = DMACH_SLIMBUS4_RX,
-		[26] = DMACH_SLIMBUS4_TX,
-		[27] = DMACH_AC97_MICIN,
-		[28] = DMACH_AC97_PCMIN,
-		[29] = DMACH_AC97_PCMOUT,
-		[30] = DMACH_MAX,
-		[31] = DMACH_MAX,
-	},
+struct dma_pl330_platdata exynos4_pdma0_pdata = {
+	.nr_valid_peri = ARRAY_SIZE(pdma0_peri),
+	.peri = pdma0_peri,
 };
 
-static struct platform_device exynos4_device_pdma0 = {
-	.name		= "s3c-pl330",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(exynos4_pdma0_resource),
-	.resource	= exynos4_pdma0_resource,
-	.dev		= {
+struct amba_device exynos4_device_pdma0 = {
+	.dev = {
+		.init_name = "dma-pl330.0",
 		.dma_mask = &dma_dmamask,
 		.coherent_dma_mask = DMA_BIT_MASK(32),
 		.platform_data = &exynos4_pdma0_pdata,
 	},
+	.res = {
+		.start = EXYNOS4_PA_PDMA0,
+		.end = EXYNOS4_PA_PDMA0 + SZ_4K,
+		.flags = IORESOURCE_MEM,
+	},
+	.irq = {IRQ_PDMA0, NO_IRQ},
+	.periphid = 0x00041330,
 };
 
-static struct resource exynos4_pdma1_resource[] = {
-	[0] = {
-		.start	= EXYNOS4_PA_PDMA1,
-		.end	= EXYNOS4_PA_PDMA1 + SZ_4K,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_PDMA1,
-		.end	= IRQ_PDMA1,
-		.flags	= IORESOURCE_IRQ,
+struct dma_pl330_peri pdma1_peri[25] = {
+	{
+		.peri_id = (u8)DMACH_PCM0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_PCM0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_PCM1_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_PCM1_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_MSM_REQ1,
+	}, {
+		.peri_id = (u8)DMACH_MSM_REQ3,
+	}, {
+		.peri_id = (u8)DMACH_SPI1_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_SPI1_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_I2S0S_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_I2S0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_I2S0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_I2S1_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_I2S1_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_UART0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_UART1_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART1_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_UART3_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART3_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_SLIMBUS1_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_SLIMBUS1_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_SLIMBUS3_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_SLIMBUS3_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_SLIMBUS5_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_SLIMBUS5_TX,
+		.rqtype = MEMTODEV,
 	},
 };
 
-static struct s3c_pl330_platdata exynos4_pdma1_pdata = {
-	.peri = {
-		[0] = DMACH_PCM0_RX,
-		[1] = DMACH_PCM0_TX,
-		[2] = DMACH_PCM1_RX,
-		[3] = DMACH_PCM1_TX,
-		[4] = DMACH_MSM_REQ1,
-		[5] = DMACH_MSM_REQ3,
-		[6] = DMACH_SPI1_RX,
-		[7] = DMACH_SPI1_TX,
-		[8] = DMACH_I2S0S_TX,
-		[9] = DMACH_I2S0_RX,
-		[10] = DMACH_I2S0_TX,
-		[11] = DMACH_I2S1_RX,
-		[12] = DMACH_I2S1_TX,
-		[13] = DMACH_UART0_RX,
-		[14] = DMACH_UART0_TX,
-		[15] = DMACH_UART1_RX,
-		[16] = DMACH_UART1_TX,
-		[17] = DMACH_UART3_RX,
-		[18] = DMACH_UART3_TX,
-		[19] = DMACH_SLIMBUS1_RX,
-		[20] = DMACH_SLIMBUS1_TX,
-		[21] = DMACH_SLIMBUS3_RX,
-		[22] = DMACH_SLIMBUS3_TX,
-		[23] = DMACH_SLIMBUS5_RX,
-		[24] = DMACH_SLIMBUS5_TX,
-		[25] = DMACH_SLIMBUS0AUX_RX,
-		[26] = DMACH_SLIMBUS0AUX_TX,
-		[27] = DMACH_SPDIF,
-		[28] = DMACH_MAX,
-		[29] = DMACH_MAX,
-		[30] = DMACH_MAX,
-		[31] = DMACH_MAX,
-	},
+struct dma_pl330_platdata exynos4_pdma1_pdata = {
+	.nr_valid_peri = ARRAY_SIZE(pdma1_peri),
+	.peri = pdma1_peri,
 };
 
-static struct platform_device exynos4_device_pdma1 = {
-	.name		= "s3c-pl330",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(exynos4_pdma1_resource),
-	.resource	= exynos4_pdma1_resource,
-	.dev		= {
+struct amba_device exynos4_device_pdma1 = {
+	.dev = {
+		.init_name = "dma-pl330.1",
 		.dma_mask = &dma_dmamask,
 		.coherent_dma_mask = DMA_BIT_MASK(32),
 		.platform_data = &exynos4_pdma1_pdata,
 	},
-};
-
-static struct platform_device *exynos4_dmacs[] __initdata = {
-	&exynos4_device_pdma0,
-	&exynos4_device_pdma1,
+	.res = {
+		.start = EXYNOS4_PA_PDMA1,
+		.end = EXYNOS4_PA_PDMA1 + SZ_4K,
+		.flags = IORESOURCE_MEM,
+	},
+	.irq = {IRQ_PDMA1, NO_IRQ},
+	.periphid = 0x00041330,
 };
 
 static int __init exynos4_dma_init(void)
 {
-	platform_add_devices(exynos4_dmacs, ARRAY_SIZE(exynos4_dmacs));
+	amba_device_register(&exynos4_device_pdma0, &iomem_resource);
+	amba_device_register(&exynos4_device_pdma1, &iomem_resource);
 
 	return 0;
 }

arch/arm/mach-exynos4/include/mach/dma.h

@@ -20,7 +20,7 @@
 #ifndef __MACH_DMA_H
 #define __MACH_DMA_H
 
-/* This platform uses the common S3C DMA API driver for PL330 */
-#include <plat/s3c-dma-pl330.h>
+/* This platform uses the common DMA API driver for PL330 */
+#include <plat/dma-pl330.h>
 
 #endif /* __MACH_DMA_H */

arch/arm/mach-exynos4/include/mach/i2c-hdmiphy.h

@@ -0,0 +1,16 @@
+/*
+ * Copyright (C) 2011 Samsung Electronics Co., Ltd.
+ *
+ * S5P series i2c hdmiphy helper definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef PLAT_S5P_I2C_HDMIPHY_H_
+#define PLAT_S5P_I2C_HDMIPHY_H_
+
+#define S5P_I2C_HDMIPHY_BUS_NUM		(8)
+
+#endif

arch/arm/mach-exynos4/include/mach/irqs.h

@@ -93,7 +93,11 @@
 #define IRQ_2D			IRQ_SPI(89)
 #define IRQ_PCIE		IRQ_SPI(90)
 
+#define IRQ_MIXER		IRQ_SPI(91)
+#define IRQ_HDMI		IRQ_SPI(92)
+#define IRQ_IIC_HDMIPHY		IRQ_SPI(93)
 #define IRQ_MFC			IRQ_SPI(94)
+#define IRQ_SDO			IRQ_SPI(95)
 
 #define IRQ_AUDIO_SS		IRQ_SPI(96)
 #define IRQ_I2S0		IRQ_SPI(97)

arch/arm/mach-exynos4/include/mach/map.h

@@ -113,6 +113,12 @@
 
 #define EXYNOS4_PA_UART			0x13800000
 
+#define EXYNOS4_PA_VP			0x12C00000
+#define EXYNOS4_PA_MIXER		0x12C10000
+#define EXYNOS4_PA_SDO			0x12C20000
+#define EXYNOS4_PA_HDMI			0x12D00000
+#define EXYNOS4_PA_IIC_HDMIPHY		0x138E0000
+
 #define EXYNOS4_PA_IIC(x)		(0x13860000 + ((x) * 0x10000))
 
 #define EXYNOS4_PA_ADC			0x13910000
@@ -162,6 +168,12 @@
 #define S5P_PA_TIMER			EXYNOS4_PA_TIMER
 #define S5P_PA_EHCI			EXYNOS4_PA_EHCI
 
+#define S5P_PA_SDO			EXYNOS4_PA_SDO
+#define S5P_PA_VP			EXYNOS4_PA_VP
+#define S5P_PA_MIXER			EXYNOS4_PA_MIXER
+#define S5P_PA_HDMI			EXYNOS4_PA_HDMI
+#define S5P_PA_IIC_HDMIPHY		EXYNOS4_PA_IIC_HDMIPHY
+
 #define SAMSUNG_PA_KEYPAD		EXYNOS4_PA_KEYPAD
 
 /* UART */

arch/arm/mach-exynos4/include/mach/pm-core.h

@@ -14,6 +14,10 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
 */
+
+#ifndef __ASM_ARCH_PM_CORE_H
+#define __ASM_ARCH_PM_CORE_H __FILE__
+
 #include <mach/regs-pmu.h>
 
 static inline void s3c_pm_debug_init_uart(void)
@@ -53,7 +57,9 @@ static inline void s3c_pm_restored_gpios(void)
 	/* nothing here yet */
 }
 
-static inline void s3c_pm_saved_gpios(void)
+static inline void samsung_pm_saved_gpios(void)
 {
 	/* nothing here yet */
 }
+
+#endif /* __ASM_ARCH_PM_CORE_H */

arch/arm/mach-exynos4/include/mach/pmu.h

@@ -13,6 +13,8 @@
 #ifndef __ASM_ARCH_PMU_H
 #define __ASM_ARCH_PMU_H __FILE__
 
+#define PMU_TABLE_END	NULL
+
 enum sys_powerdown {
 	SYS_AFTR,
 	SYS_LPA,
@@ -20,6 +22,11 @@ enum sys_powerdown {
 	NUM_SYS_POWERDOWN,
 };
 
+struct exynos4_pmu_conf {
+	void __iomem *reg;
+	unsigned int val[NUM_SYS_POWERDOWN];
+};
+
 extern void exynos4_sys_powerdown_conf(enum sys_powerdown mode);
 
 #endif /* __ASM_ARCH_PMU_H */

arch/arm/mach-exynos4/include/mach/regs-pmu.h

@@ -25,9 +25,10 @@
 
 #define S5P_USE_STANDBY_WFI0			(1 << 16)
 #define S5P_USE_STANDBY_WFI1			(1 << 17)
+#define S5P_USE_STANDBYWFI_ISP_ARM		(1 << 18)
 #define S5P_USE_STANDBY_WFE0			(1 << 24)
 #define S5P_USE_STANDBY_WFE1			(1 << 25)
-#define S5P_USE_MASK				((0x3 << 16) | (0x3 << 24))
+#define S5P_USE_STANDBYWFE_ISP_ARM		(1 << 26)
 
 #define S5P_SWRESET				S5P_PMUREG(0x0400)
 
@@ -35,15 +36,17 @@
 #define S5P_EINT_WAKEUP_MASK			S5P_PMUREG(0x0604)
 #define S5P_WAKEUP_MASK				S5P_PMUREG(0x0608)
 
-#define S5P_USBHOST_PHY_CONTROL			S5P_PMUREG(0x0708)
-#define S5P_USBHOST_PHY_ENABLE			(1 << 0)
+#define S5P_HDMI_PHY_CONTROL			S5P_PMUREG(0x0700)
+#define S5P_HDMI_PHY_ENABLE			(1 << 0)
+
+#define S5P_DAC_PHY_CONTROL			S5P_PMUREG(0x070C)
+#define S5P_DAC_PHY_ENABLE			(1 << 0)
 
 #define S5P_MIPI_DPHY_CONTROL(n)		S5P_PMUREG(0x0710 + (n) * 4)
 #define S5P_MIPI_DPHY_ENABLE			(1 << 0)
 #define S5P_MIPI_DPHY_SRESETN			(1 << 1)
 #define S5P_MIPI_DPHY_MRESETN			(1 << 2)
 
-#define S5P_PMU_SATA_PHY_CONTROL		S5P_PMUREG(0x0720)
 #define S5P_INFORM0				S5P_PMUREG(0x0800)
 #define S5P_INFORM1				S5P_PMUREG(0x0804)
 #define S5P_INFORM2				S5P_PMUREG(0x0808)
@@ -76,7 +79,6 @@
 #define S5P_CMU_CLKSTOP_MFC_LOWPWR		S5P_PMUREG(0x1148)
 #define S5P_CMU_CLKSTOP_G3D_LOWPWR		S5P_PMUREG(0x114C)
 #define S5P_CMU_CLKSTOP_LCD0_LOWPWR		S5P_PMUREG(0x1150)
-#define S5P_CMU_CLKSTOP_LCD1_LOWPWR		S5P_PMUREG(0x1154)
 #define S5P_CMU_CLKSTOP_MAUDIO_LOWPWR		S5P_PMUREG(0x1158)
 #define S5P_CMU_CLKSTOP_GPS_LOWPWR		S5P_PMUREG(0x115C)
 #define S5P_CMU_RESET_CAM_LOWPWR		S5P_PMUREG(0x1160)
@@ -84,7 +86,6 @@
 #define S5P_CMU_RESET_MFC_LOWPWR		S5P_PMUREG(0x1168)
 #define S5P_CMU_RESET_G3D_LOWPWR		S5P_PMUREG(0x116C)
 #define S5P_CMU_RESET_LCD0_LOWPWR		S5P_PMUREG(0x1170)
-#define S5P_CMU_RESET_LCD1_LOWPWR		S5P_PMUREG(0x1174)
 #define S5P_CMU_RESET_MAUDIO_LOWPWR		S5P_PMUREG(0x1178)
 #define S5P_CMU_RESET_GPS_LOWPWR		S5P_PMUREG(0x117C)
 #define S5P_TOP_BUS_LOWPWR			S5P_PMUREG(0x1180)
@@ -92,14 +93,11 @@
 #define S5P_TOP_PWR_LOWPWR			S5P_PMUREG(0x1188)
 #define S5P_LOGIC_RESET_LOWPWR			S5P_PMUREG(0x11A0)
 #define S5P_ONENAND_MEM_LOWPWR			S5P_PMUREG(0x11C0)
-#define S5P_MODIMIF_MEM_LOWPWR			S5P_PMUREG(0x11C4)
 #define S5P_G2D_ACP_MEM_LOWPWR			S5P_PMUREG(0x11C8)
 #define S5P_USBOTG_MEM_LOWPWR			S5P_PMUREG(0x11CC)
 #define S5P_HSMMC_MEM_LOWPWR			S5P_PMUREG(0x11D0)
 #define S5P_CSSYS_MEM_LOWPWR			S5P_PMUREG(0x11D4)
 #define S5P_SECSS_MEM_LOWPWR			S5P_PMUREG(0x11D8)
-#define S5P_PCIE_MEM_LOWPWR			S5P_PMUREG(0x11E0)
-#define S5P_SATA_MEM_LOWPWR			S5P_PMUREG(0x11E4)
 #define S5P_PAD_RETENTION_DRAM_LOWPWR		S5P_PMUREG(0x1200)
 #define S5P_PAD_RETENTION_MAUDIO_LOWPWR		S5P_PMUREG(0x1204)
 #define S5P_PAD_RETENTION_GPIO_LOWPWR		S5P_PMUREG(0x1220)
@@ -120,7 +118,6 @@
 #define S5P_MFC_LOWPWR				S5P_PMUREG(0x1388)
 #define S5P_G3D_LOWPWR				S5P_PMUREG(0x138C)
 #define S5P_LCD0_LOWPWR				S5P_PMUREG(0x1390)
-#define S5P_LCD1_LOWPWR				S5P_PMUREG(0x1394)
 #define S5P_MAUDIO_LOWPWR			S5P_PMUREG(0x1398)
 #define S5P_GPS_LOWPWR				S5P_PMUREG(0x139C)
 #define S5P_GPS_ALIVE_LOWPWR			S5P_PMUREG(0x13A0)
@@ -156,7 +153,6 @@
 #define S5P_PMU_MFC_CONF			S5P_PMUREG(0x3C40)
 #define S5P_PMU_G3D_CONF			S5P_PMUREG(0x3C60)
 #define S5P_PMU_LCD0_CONF			S5P_PMUREG(0x3C80)
-#define S5P_PMU_LCD1_CONF			S5P_PMUREG(0x3CA0)
 #define S5P_PMU_GPS_CONF			S5P_PMUREG(0x3CE0)
 
 #define S5P_PMU_SATA_PHY_CONTROL_EN		0x1
@@ -165,4 +161,60 @@
 
 #define S5P_CHECK_SLEEP				0x00000BAD
 
+/* Only for EXYNOS4210 */
+#define S5P_USBHOST_PHY_CONTROL		S5P_PMUREG(0x0708)
+#define S5P_USBHOST_PHY_ENABLE		(1 << 0)
+
+#define S5P_PMU_SATA_PHY_CONTROL	S5P_PMUREG(0x0720)
+
+#define S5P_CMU_CLKSTOP_LCD1_LOWPWR	S5P_PMUREG(0x1154)
+#define S5P_CMU_RESET_LCD1_LOWPWR	S5P_PMUREG(0x1174)
+#define S5P_MODIMIF_MEM_LOWPWR		S5P_PMUREG(0x11C4)
+#define S5P_PCIE_MEM_LOWPWR		S5P_PMUREG(0x11E0)
+#define S5P_SATA_MEM_LOWPWR		S5P_PMUREG(0x11E4)
+#define S5P_LCD1_LOWPWR			S5P_PMUREG(0x1394)
+
+#define S5P_PMU_LCD1_CONF		S5P_PMUREG(0x3CA0)
+
+/* Only for EXYNOS4212 */
+#define S5P_ISP_ARM_LOWPWR			S5P_PMUREG(0x1050)
+#define S5P_DIS_IRQ_ISP_ARM_LOCAL_LOWPWR	S5P_PMUREG(0x1054)
+#define S5P_DIS_IRQ_ISP_ARM_CENTRAL_LOWPWR	S5P_PMUREG(0x1058)
+#define S5P_CMU_ACLKSTOP_COREBLK_LOWPWR		S5P_PMUREG(0x1110)
+#define S5P_CMU_SCLKSTOP_COREBLK_LOWPWR		S5P_PMUREG(0x1114)
+#define S5P_CMU_RESET_COREBLK_LOWPWR		S5P_PMUREG(0x111C)
+#define S5P_MPLLUSER_SYSCLK_LOWPWR		S5P_PMUREG(0x1130)
+#define S5P_CMU_CLKSTOP_ISP_LOWPWR		S5P_PMUREG(0x1154)
+#define S5P_CMU_RESET_ISP_LOWPWR		S5P_PMUREG(0x1174)
+#define S5P_TOP_BUS_COREBLK_LOWPWR		S5P_PMUREG(0x1190)
+#define S5P_TOP_RETENTION_COREBLK_LOWPWR	S5P_PMUREG(0x1194)
+#define S5P_TOP_PWR_COREBLK_LOWPWR		S5P_PMUREG(0x1198)
+#define S5P_OSCCLK_GATE_LOWPWR			S5P_PMUREG(0x11A4)
+#define S5P_LOGIC_RESET_COREBLK_LOWPWR		S5P_PMUREG(0x11B0)
+#define S5P_OSCCLK_GATE_COREBLK_LOWPWR		S5P_PMUREG(0x11B4)
+#define S5P_HSI_MEM_LOWPWR			S5P_PMUREG(0x11C4)
+#define S5P_ROTATOR_MEM_LOWPWR			S5P_PMUREG(0x11DC)
+#define S5P_PAD_RETENTION_GPIO_COREBLK_LOWPWR	S5P_PMUREG(0x123C)
+#define S5P_PAD_ISOLATION_COREBLK_LOWPWR	S5P_PMUREG(0x1250)
+#define S5P_GPIO_MODE_COREBLK_LOWPWR		S5P_PMUREG(0x1320)
+#define S5P_TOP_ASB_RESET_LOWPWR		S5P_PMUREG(0x1344)
+#define S5P_TOP_ASB_ISOLATION_LOWPWR		S5P_PMUREG(0x1348)
+#define S5P_ISP_LOWPWR				S5P_PMUREG(0x1394)
+#define S5P_DRAM_FREQ_DOWN_LOWPWR		S5P_PMUREG(0x13B0)
+#define S5P_DDRPHY_DLLOFF_LOWPWR		S5P_PMUREG(0x13B4)
+#define S5P_CMU_SYSCLK_ISP_LOWPWR		S5P_PMUREG(0x13B8)
+#define S5P_CMU_SYSCLK_GPS_LOWPWR		S5P_PMUREG(0x13BC)
+#define S5P_LPDDR_PHY_DLL_LOCK_LOWPWR		S5P_PMUREG(0x13C0)
+
+#define S5P_ARM_L2_0_OPTION			S5P_PMUREG(0x2608)
+#define S5P_ARM_L2_1_OPTION			S5P_PMUREG(0x2628)
+#define S5P_ONENAND_MEM_OPTION			S5P_PMUREG(0x2E08)
+#define S5P_HSI_MEM_OPTION			S5P_PMUREG(0x2E28)
+#define S5P_G2D_ACP_MEM_OPTION			S5P_PMUREG(0x2E48)
+#define S5P_USBOTG_MEM_OPTION			S5P_PMUREG(0x2E68)
+#define S5P_HSMMC_MEM_OPTION			S5P_PMUREG(0x2E88)
+#define S5P_CSSYS_MEM_OPTION			S5P_PMUREG(0x2EA8)
+#define S5P_SECSS_MEM_OPTION			S5P_PMUREG(0x2EC8)
+#define S5P_ROTATOR_MEM_OPTION			S5P_PMUREG(0x2F48)
+
 #endif /* __ASM_ARCH_REGS_PMU_H */

arch/arm/mach-exynos4/mach-nuri.c

@@ -32,10 +32,12 @@
 #include <asm/mach-types.h>
 
 #include <plat/adc.h>
+#include <plat/regs-fb-v4.h>
 #include <plat/regs-serial.h>
 #include <plat/exynos4.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
+#include <plat/fb.h>
 #include <plat/sdhci.h>
 #include <plat/ehci.h>
 #include <plat/clock.h>
@@ -199,6 +201,33 @@ static struct platform_device nuri_gpio_keys = {
 	},
 };
 
+/* Frame Buffer */
+static struct s3c_fb_pd_win nuri_fb_win0 = {
+	.win_mode = {
+		.left_margin	= 64,
+		.right_margin	= 16,
+		.upper_margin	= 64,
+		.lower_margin	= 1,
+		.hsync_len	= 48,
+		.vsync_len	= 3,
+		.xres		= 1280,
+		.yres		= 800,
+		.refresh	= 60,
+	},
+	.max_bpp	= 24,
+	.default_bpp	= 16,
+	.virtual_x	= 1280,
+	.virtual_y	= 800,
+};
+
+static struct s3c_fb_platdata nuri_fb_pdata __initdata = {
+	.win[0]		= &nuri_fb_win0,
+	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB |
+			  VIDCON0_CLKSEL_LCD,
+	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+	.setup_gpio	= exynos4_fimd0_gpio_setup_24bpp,
+};
+
 static void nuri_lcd_power_on(struct plat_lcd_data *pd, unsigned int power)
 {
 	int gpio = EXYNOS4_GPE1(5);
@@ -1092,6 +1121,7 @@ static struct platform_device *nuri_devices[] __initdata = {
 	/* Samsung Platform Devices */
 	&s3c_device_i2c5, /* PMIC should initialize first */
 	&emmc_fixed_voltage,
+	&s5p_device_fimd0,
 	&s3c_device_hsmmc0,
 	&s3c_device_hsmmc2,
 	&s3c_device_hsmmc3,
@@ -1106,6 +1136,7 @@ static struct platform_device *nuri_devices[] __initdata = {
 	&s5p_device_mfc_l,
 	&s5p_device_mfc_r,
 	&exynos4_device_pd[PD_MFC],
+	&exynos4_device_pd[PD_LCD0],
 
 	/* NURI Devices */
 	&nuri_gpio_keys,
@@ -1142,12 +1173,15 @@ static void __init nuri_machine_init(void)
 	i2c9_devs[I2C9_MAX17042].irq = gpio_to_irq(EXYNOS4_GPX2(3));
 	i2c_register_board_info(9, i2c9_devs, ARRAY_SIZE(i2c9_devs));
 
+	s5p_fimd0_set_platdata(&nuri_fb_pdata);
+
 	nuri_ehci_init();
 	clk_xusbxti.rate = 24000000;
 
 	/* Last */
 	platform_add_devices(nuri_devices, ARRAY_SIZE(nuri_devices));
 	s5p_device_mfc.dev.parent = &exynos4_device_pd[PD_MFC].dev;
+	s5p_device_fimd0.dev.parent = &exynos4_device_pd[PD_LCD0].dev;
 }
 
 MACHINE_START(NURI, "NURI")

arch/arm/mach-exynos4/mach-origen.c

@@ -14,16 +14,31 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/input.h>
+#include <linux/pwm_backlight.h>
+#include <linux/gpio_keys.h>
+#include <linux/i2c.h>
+#include <linux/regulator/machine.h>
+#include <linux/mfd/max8997.h>
+#include <linux/lcd.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 
+#include <video/platform_lcd.h>
+
 #include <plat/regs-serial.h>
+#include <plat/regs-fb-v4.h>
 #include <plat/exynos4.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/sdhci.h>
 #include <plat/iic.h>
+#include <plat/ehci.h>
+#include <plat/clock.h>
+#include <plat/gpio-cfg.h>
+#include <plat/backlight.h>
+#include <plat/pd.h>
+#include <plat/fb.h>
 
 #include <mach/map.h>
 
@@ -72,19 +87,543 @@ static struct s3c2410_uartcfg origen_uartcfgs[] __initdata = {
 	},
 };
 
+static struct regulator_consumer_supply __initdata ldo3_consumer[] = {
+	REGULATOR_SUPPLY("vdd11", "s5p-mipi-csis.0"), /* MIPI */
+};
+static struct regulator_consumer_supply __initdata ldo6_consumer[] = {
+	REGULATOR_SUPPLY("vdd18", "s5p-mipi-csis.0"), /* MIPI */
+};
+static struct regulator_consumer_supply __initdata ldo7_consumer[] = {
+	REGULATOR_SUPPLY("avdd", "alc5625"), /* Realtek ALC5625 */
+};
+static struct regulator_consumer_supply __initdata ldo8_consumer[] = {
+	REGULATOR_SUPPLY("vdd", "s5p-adc"), /* ADC */
+};
+static struct regulator_consumer_supply __initdata ldo9_consumer[] = {
+	REGULATOR_SUPPLY("dvdd", "swb-a31"), /* AR6003 WLAN & CSR 8810 BT */
+};
+static struct regulator_consumer_supply __initdata ldo11_consumer[] = {
+	REGULATOR_SUPPLY("dvdd", "alc5625"), /* Realtek ALC5625 */
+};
+static struct regulator_consumer_supply __initdata ldo14_consumer[] = {
+	REGULATOR_SUPPLY("avdd18", "swb-a31"), /* AR6003 WLAN & CSR 8810 BT */
+};
+static struct regulator_consumer_supply __initdata ldo17_consumer[] = {
+	REGULATOR_SUPPLY("vdd33", "swb-a31"), /* AR6003 WLAN & CSR 8810 BT */
+};
+static struct regulator_consumer_supply __initdata buck1_consumer[] = {
+	REGULATOR_SUPPLY("vdd_arm", NULL), /* CPUFREQ */
+};
+static struct regulator_consumer_supply __initdata buck2_consumer[] = {
+	REGULATOR_SUPPLY("vdd_int", NULL), /* CPUFREQ */
+};
+static struct regulator_consumer_supply __initdata buck3_consumer[] = {
+	REGULATOR_SUPPLY("vdd_g3d", "mali_drm"), /* G3D */
+};
+static struct regulator_consumer_supply __initdata buck7_consumer[] = {
+	REGULATOR_SUPPLY("vcc", "platform-lcd"), /* LCD */
+};
+
+static struct regulator_init_data __initdata max8997_ldo1_data = {
+	.constraints	= {
+		.name		= "VDD_ABB_3.3V",
+		.min_uV		= 3300000,
+		.max_uV		= 3300000,
+		.apply_uV	= 1,
+		.state_mem	= {
+			.disabled	= 1,
+		},
+	},
+};
+
+static struct regulator_init_data __initdata max8997_ldo2_data	= {
+	.constraints	= {
+		.name		= "VDD_ALIVE_1.1V",
+		.min_uV		= 1100000,
+		.max_uV		= 1100000,
+		.apply_uV	= 1,
+		.always_on	= 1,
+		.state_mem	= {
+			.enabled	= 1,
+		},
+	},
+};
+
+static struct regulator_init_data __initdata max8997_ldo3_data = {
+	.constraints	= {
+		.name		= "VMIPI_1.1V",
+		.min_uV		= 1100000,
+		.max_uV		= 1100000,
+		.apply_uV	= 1,
+		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
+		.state_mem	= {
+			.disabled	= 1,
+		},
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(ldo3_consumer),
+	.consumer_supplies	= ldo3_consumer,
+};
+
+static struct regulator_init_data __initdata max8997_ldo4_data = {
+	.constraints	= {
+		.name		= "VDD_RTC_1.8V",
+		.min_uV		= 1800000,
+		.max_uV		= 1800000,
+		.apply_uV	= 1,
+		.always_on	= 1,
+		.state_mem	= {
+			.disabled	= 1,
+		},
+	},
+};
+
+static struct regulator_init_data __initdata max8997_ldo6_data = {
+	.constraints	= {
+		.name		= "VMIPI_1.8V",
+		.min_uV		= 1800000,
+		.max_uV		= 1800000,
+		.apply_uV	= 1,
+		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
+		.state_mem	= {
+			.disabled	= 1,
+		},
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(ldo6_consumer),
+	.consumer_supplies	= ldo6_consumer,
+};
+
+static struct regulator_init_data __initdata max8997_ldo7_data = {
+	.constraints	= {
+		.name		= "VDD_AUD_1.8V",
+		.min_uV		= 1800000,
+		.max_uV		= 1800000,
+		.apply_uV	= 1,
+		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
+		.state_mem	= {
+			.disabled	= 1,
+		},
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(ldo7_consumer),
+	.consumer_supplies	= ldo7_consumer,
+};
+
+static struct regulator_init_data __initdata max8997_ldo8_data = {
+	.constraints	= {
+		.name		= "VADC_3.3V",
+		.min_uV		= 3300000,
+		.max_uV		= 3300000,
+		.apply_uV	= 1,
+		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
+		.state_mem	= {
+			.disabled	= 1,
+		},
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(ldo8_consumer),
+	.consumer_supplies	= ldo8_consumer,
+};
+
+static struct regulator_init_data __initdata max8997_ldo9_data = {
+	.constraints	= {
+		.name		= "DVDD_SWB_2.8V",
+		.min_uV		= 2800000,
+		.max_uV		= 2800000,
+		.apply_uV	= 1,
+		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
+		.state_mem	= {
+			.disabled	= 1,
+		},
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(ldo9_consumer),
+	.consumer_supplies	= ldo9_consumer,
+};
+
+static struct regulator_init_data __initdata max8997_ldo10_data = {
+	.constraints	= {
+		.name		= "VDD_PLL_1.1V",
+		.min_uV		= 1100000,
+		.max_uV		= 1100000,
+		.apply_uV	= 1,
+		.always_on	= 1,
+		.state_mem	= {
+			.disabled	= 1,
+		},
+	},
+};
+
+static struct regulator_init_data __initdata max8997_ldo11_data = {
+	.constraints	= {
+		.name		= "VDD_AUD_3V",
+		.min_uV		= 3000000,
+		.max_uV		= 3000000,
+		.apply_uV	= 1,
+		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
+		.state_mem	= {
+			.disabled	= 1,
+		},
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(ldo11_consumer),
+	.consumer_supplies	= ldo11_consumer,
+};
+
+static struct regulator_init_data __initdata max8997_ldo14_data = {
+	.constraints	= {
+		.name		= "AVDD18_SWB_1.8V",
+		.min_uV		= 1800000,
+		.max_uV		= 1800000,
+		.apply_uV	= 1,
+		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
+		.state_mem	= {
+			.disabled	= 1,
+		},
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(ldo14_consumer),
+	.consumer_supplies	= ldo14_consumer,
+};
+
+static struct regulator_init_data __initdata max8997_ldo17_data = {
+	.constraints	= {
+		.name		= "VDD_SWB_3.3V",
+		.min_uV		= 3300000,
+		.max_uV		= 3300000,
+		.apply_uV	= 1,
+		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
+		.state_mem	= {
+			.disabled	= 1,
+		},
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(ldo17_consumer),
+	.consumer_supplies	= ldo17_consumer,
+};
+
+static struct regulator_init_data __initdata max8997_ldo21_data = {
+	.constraints	= {
+		.name		= "VDD_MIF_1.2V",
+		.min_uV		= 1200000,
+		.max_uV		= 1200000,
+		.apply_uV	= 1,
+		.always_on	= 1,
+		.state_mem	= {
+			.disabled	= 1,
+		},
+	},
+};
+
+static struct regulator_init_data __initdata max8997_buck1_data = {
+	.constraints	= {
+		.name		= "VDD_ARM_1.2V",
+		.min_uV		= 950000,
+		.max_uV		= 1350000,
+		.always_on	= 1,
+		.boot_on	= 1,
+		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE,
+		.state_mem	= {
+			.disabled	= 1,
+		},
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(buck1_consumer),
+	.consumer_supplies	= buck1_consumer,
+};
+
+static struct regulator_init_data __initdata max8997_buck2_data = {
+	.constraints	= {
+		.name		= "VDD_INT_1.1V",
+		.min_uV		= 900000,
+		.max_uV		= 1100000,
+		.always_on	= 1,
+		.boot_on	= 1,
+		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE,
+		.state_mem	= {
+			.disabled	= 1,
+		},
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(buck2_consumer),
+	.consumer_supplies	= buck2_consumer,
+};
+
+static struct regulator_init_data __initdata max8997_buck3_data = {
+	.constraints	= {
+		.name		= "VDD_G3D_1.1V",
+		.min_uV		= 900000,
+		.max_uV		= 1100000,
+		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE |
+					REGULATOR_CHANGE_STATUS,
+		.state_mem	= {
+			.disabled	= 1,
+		},
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(buck3_consumer),
+	.consumer_supplies	= buck3_consumer,
+};
+
+static struct regulator_init_data __initdata max8997_buck5_data = {
+	.constraints	= {
+		.name		= "VDDQ_M1M2_1.2V",
+		.min_uV		= 1200000,
+		.max_uV		= 1200000,
+		.apply_uV	= 1,
+		.always_on	= 1,
+		.state_mem	= {
+			.disabled	= 1,
+		},
+	},
+};
+
+static struct regulator_init_data __initdata max8997_buck7_data = {
+	.constraints	= {
+		.name		= "VDD_LCD_3.3V",
+		.min_uV		= 3300000,
+		.max_uV		= 3300000,
+		.boot_on	= 1,
+		.apply_uV	= 1,
+		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
+		.state_mem	= {
+			.disabled	= 1
+		},
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(buck7_consumer),
+	.consumer_supplies	= buck7_consumer,
+};
+
+static struct max8997_regulator_data __initdata origen_max8997_regulators[] = {
+	{ MAX8997_LDO1,		&max8997_ldo1_data },
+	{ MAX8997_LDO2,		&max8997_ldo2_data },
+	{ MAX8997_LDO3,		&max8997_ldo3_data },
+	{ MAX8997_LDO4,		&max8997_ldo4_data },
+	{ MAX8997_LDO6,		&max8997_ldo6_data },
+	{ MAX8997_LDO7,		&max8997_ldo7_data },
+	{ MAX8997_LDO8,		&max8997_ldo8_data },
+	{ MAX8997_LDO9,		&max8997_ldo9_data },
+	{ MAX8997_LDO10,	&max8997_ldo10_data },
+	{ MAX8997_LDO11,	&max8997_ldo11_data },
+	{ MAX8997_LDO14,	&max8997_ldo14_data },
+	{ MAX8997_LDO17,	&max8997_ldo17_data },
+	{ MAX8997_LDO21,	&max8997_ldo21_data },
+	{ MAX8997_BUCK1,	&max8997_buck1_data },
+	{ MAX8997_BUCK2,	&max8997_buck2_data },
+	{ MAX8997_BUCK3,	&max8997_buck3_data },
+	{ MAX8997_BUCK5,	&max8997_buck5_data },
+	{ MAX8997_BUCK7,	&max8997_buck7_data },
+};
+
+struct max8997_platform_data __initdata origen_max8997_pdata = {
+	.num_regulators = ARRAY_SIZE(origen_max8997_regulators),
+	.regulators	= origen_max8997_regulators,
+
+	.wakeup	= true,
+	.buck1_gpiodvs	= false,
+	.buck2_gpiodvs	= false,
+	.buck5_gpiodvs	= false,
+	.irq_base	= IRQ_GPIO_END + 1,
+
+	.ignore_gpiodvs_side_effect = true,
+	.buck125_default_idx = 0x0,
+
+	.buck125_gpios[0]	= EXYNOS4_GPX0(0),
+	.buck125_gpios[1]	= EXYNOS4_GPX0(1),
+	.buck125_gpios[2]	= EXYNOS4_GPX0(2),
+
+	.buck1_voltage[0]	= 1350000,
+	.buck1_voltage[1]	= 1300000,
+	.buck1_voltage[2]	= 1250000,
+	.buck1_voltage[3]	= 1200000,
+	.buck1_voltage[4]	= 1150000,
+	.buck1_voltage[5]	= 1100000,
+	.buck1_voltage[6]	= 1000000,
+	.buck1_voltage[7]	= 950000,
+
+	.buck2_voltage[0]	= 1100000,
+	.buck2_voltage[1]	= 1100000,
+	.buck2_voltage[2]	= 1100000,
+	.buck2_voltage[3]	= 1100000,
+	.buck2_voltage[4]	= 1000000,
+	.buck2_voltage[5]	= 1000000,
+	.buck2_voltage[6]	= 1000000,
+	.buck2_voltage[7]	= 1000000,
+
+	.buck5_voltage[0]	= 1200000,
+	.buck5_voltage[1]	= 1200000,
+	.buck5_voltage[2]	= 1200000,
+	.buck5_voltage[3]	= 1200000,
+	.buck5_voltage[4]	= 1200000,
+	.buck5_voltage[5]	= 1200000,
+	.buck5_voltage[6]	= 1200000,
+	.buck5_voltage[7]	= 1200000,
+};
+
+/* I2C0 */
+static struct i2c_board_info i2c0_devs[] __initdata = {
+	{
+		I2C_BOARD_INFO("max8997", (0xCC >> 1)),
+		.platform_data	= &origen_max8997_pdata,
+		.irq		= IRQ_EINT(4),
+	},
+};
+
+static struct s3c_sdhci_platdata origen_hsmmc0_pdata __initdata = {
+	.cd_type		= S3C_SDHCI_CD_INTERNAL,
+	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
+};
+
 static struct s3c_sdhci_platdata origen_hsmmc2_pdata __initdata = {
-	.cd_type		= S3C_SDHCI_CD_GPIO,
-	.ext_cd_gpio		= EXYNOS4_GPK2(2),
-	.ext_cd_gpio_invert	= 1,
+	.cd_type		= S3C_SDHCI_CD_INTERNAL,
 	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
 };
 
+/* USB EHCI */
+static struct s5p_ehci_platdata origen_ehci_pdata;
+
+static void __init origen_ehci_init(void)
+{
+	struct s5p_ehci_platdata *pdata = &origen_ehci_pdata;
+
+	s5p_ehci_set_platdata(pdata);
+}
+
+static struct gpio_keys_button origen_gpio_keys_table[] = {
+	{
+		.code			= KEY_MENU,
+		.gpio			= EXYNOS4_GPX1(5),
+		.desc			= "gpio-keys: KEY_MENU",
+		.type			= EV_KEY,
+		.active_low		= 1,
+		.wakeup			= 1,
+		.debounce_interval	= 1,
+	}, {
+		.code			= KEY_HOME,
+		.gpio			= EXYNOS4_GPX1(6),
+		.desc			= "gpio-keys: KEY_HOME",
+		.type			= EV_KEY,
+		.active_low		= 1,
+		.wakeup			= 1,
+		.debounce_interval	= 1,
+	}, {
+		.code			= KEY_BACK,
+		.gpio			= EXYNOS4_GPX1(7),
+		.desc			= "gpio-keys: KEY_BACK",
+		.type			= EV_KEY,
+		.active_low		= 1,
+		.wakeup			= 1,
+		.debounce_interval	= 1,
+	}, {
+		.code			= KEY_UP,
+		.gpio			= EXYNOS4_GPX2(0),
+		.desc			= "gpio-keys: KEY_UP",
+		.type			= EV_KEY,
+		.active_low		= 1,
+		.wakeup			= 1,
+		.debounce_interval	= 1,
+	}, {
+		.code			= KEY_DOWN,
+		.gpio			= EXYNOS4_GPX2(1),
+		.desc			= "gpio-keys: KEY_DOWN",
+		.type			= EV_KEY,
+		.active_low		= 1,
+		.wakeup			= 1,
+		.debounce_interval	= 1,
+	},
+};
+
+static struct gpio_keys_platform_data origen_gpio_keys_data = {
+	.buttons	= origen_gpio_keys_table,
+	.nbuttons	= ARRAY_SIZE(origen_gpio_keys_table),
+};
+
+static struct platform_device origen_device_gpiokeys = {
+	.name		= "gpio-keys",
+	.dev		= {
+		.platform_data	= &origen_gpio_keys_data,
+	},
+};
+
+static void lcd_hv070wsa_set_power(struct plat_lcd_data *pd, unsigned int power)
+{
+	int ret;
+
+	if (power)
+		ret = gpio_request_one(EXYNOS4_GPE3(4),
+					GPIOF_OUT_INIT_HIGH, "GPE3_4");
+	else
+		ret = gpio_request_one(EXYNOS4_GPE3(4),
+					GPIOF_OUT_INIT_LOW, "GPE3_4");
+
+	gpio_free(EXYNOS4_GPE3(4));
+
+	if (ret)
+		pr_err("failed to request gpio for LCD power: %d\n", ret);
+}
+
+static struct plat_lcd_data origen_lcd_hv070wsa_data = {
+	.set_power = lcd_hv070wsa_set_power,
+};
+
+static struct platform_device origen_lcd_hv070wsa = {
+	.name			= "platform-lcd",
+	.dev.parent		= &s5p_device_fimd0.dev,
+	.dev.platform_data	= &origen_lcd_hv070wsa_data,
+};
+
+static struct s3c_fb_pd_win origen_fb_win0 = {
+	.win_mode = {
+		.left_margin	= 64,
+		.right_margin	= 16,
+		.upper_margin	= 64,
+		.lower_margin	= 16,
+		.hsync_len	= 48,
+		.vsync_len	= 3,
+		.xres		= 1024,
+		.yres		= 600,
+	},
+	.max_bpp		= 32,
+	.default_bpp		= 24,
+};
+
+static struct s3c_fb_platdata origen_lcd_pdata __initdata = {
+	.win[0]		= &origen_fb_win0,
+	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+	.setup_gpio	= exynos4_fimd0_gpio_setup_24bpp,
+};
+
 static struct platform_device *origen_devices[] __initdata = {
 	&s3c_device_hsmmc2,
+	&s3c_device_hsmmc0,
+	&s3c_device_i2c0,
 	&s3c_device_rtc,
 	&s3c_device_wdt,
+	&s5p_device_ehci,
+	&s5p_device_fimc0,
+	&s5p_device_fimc1,
+	&s5p_device_fimc2,
+	&s5p_device_fimc3,
+	&s5p_device_fimd0,
+	&s5p_device_hdmi,
+	&s5p_device_i2c_hdmiphy,
+	&s5p_device_mixer,
+	&exynos4_device_pd[PD_LCD0],
+	&exynos4_device_pd[PD_TV],
+	&origen_device_gpiokeys,
+	&origen_lcd_hv070wsa,
+};
+
+/* LCD Backlight data */
+static struct samsung_bl_gpio_info origen_bl_gpio_info = {
+	.no		= EXYNOS4_GPD0(0),
+	.func		= S3C_GPIO_SFN(2),
 };
 
+static struct platform_pwm_backlight_data origen_bl_data = {
+	.pwm_id		= 0,
+	.pwm_period_ns	= 1000,
+};
+
+static void s5p_tv_setup(void)
+{
+	/* Direct HPD to HDMI chip */
+	gpio_request_one(EXYNOS4_GPX3(7), GPIOF_IN, "hpd-plug");
+	s3c_gpio_cfgpin(EXYNOS4_GPX3(7), S3C_GPIO_SFN(0x3));
+	s3c_gpio_setpull(EXYNOS4_GPX3(7), S3C_GPIO_PULL_NONE);
+}
+
 static void __init origen_map_io(void)
 {
 	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
@@ -92,10 +631,42 @@ static void __init origen_map_io(void)
 	s3c24xx_init_uarts(origen_uartcfgs, ARRAY_SIZE(origen_uartcfgs));
 }
 
+static void __init origen_power_init(void)
+{
+	gpio_request(EXYNOS4_GPX0(4), "PMIC_IRQ");
+	s3c_gpio_cfgpin(EXYNOS4_GPX0(4), S3C_GPIO_SFN(0xf));
+	s3c_gpio_setpull(EXYNOS4_GPX0(4), S3C_GPIO_PULL_NONE);
+}
+
 static void __init origen_machine_init(void)
 {
+	origen_power_init();
+
+	s3c_i2c0_set_platdata(NULL);
+	i2c_register_board_info(0, i2c0_devs, ARRAY_SIZE(i2c0_devs));
+
+	/*
+	 * Since sdhci instance 2 can contain a bootable media,
+	 * sdhci instance 0 is registered after instance 2.
+	 */
 	s3c_sdhci2_set_platdata(&origen_hsmmc2_pdata);
+	s3c_sdhci0_set_platdata(&origen_hsmmc0_pdata);
+
+	origen_ehci_init();
+	clk_xusbxti.rate = 24000000;
+
+	s5p_tv_setup();
+	s5p_i2c_hdmiphy_set_platdata(NULL);
+
+	s5p_fimd0_set_platdata(&origen_lcd_pdata);
+
 	platform_add_devices(origen_devices, ARRAY_SIZE(origen_devices));
+	s5p_device_fimd0.dev.parent = &exynos4_device_pd[PD_LCD0].dev;
+
+	s5p_device_hdmi.dev.parent = &exynos4_device_pd[PD_TV].dev;
+	s5p_device_mixer.dev.parent = &exynos4_device_pd[PD_TV].dev;
+
+	samsung_bl_set(&origen_bl_gpio_info, &origen_bl_data);
 }
 
 MACHINE_START(ORIGEN, "ORIGEN")

arch/arm/mach-exynos4/mach-smdkv310.c

@@ -37,6 +37,9 @@
 #include <plat/pd.h>
 #include <plat/gpio-cfg.h>
 #include <plat/backlight.h>
+#include <plat/mfc.h>
+#include <plat/ehci.h>
+#include <plat/clock.h>
 
 #include <mach/map.h>
 
@@ -232,17 +235,36 @@ static struct i2c_board_info i2c_devs1[] __initdata = {
 	{I2C_BOARD_INFO("wm8994", 0x1a),},
 };
 
+/* USB EHCI */
+static struct s5p_ehci_platdata smdkv310_ehci_pdata;
+
+static void __init smdkv310_ehci_init(void)
+{
+	struct s5p_ehci_platdata *pdata = &smdkv310_ehci_pdata;
+
+	s5p_ehci_set_platdata(pdata);
+}
+
 static struct platform_device *smdkv310_devices[] __initdata = {
 	&s3c_device_hsmmc0,
 	&s3c_device_hsmmc1,
 	&s3c_device_hsmmc2,
 	&s3c_device_hsmmc3,
 	&s3c_device_i2c1,
+	&s5p_device_i2c_hdmiphy,
 	&s3c_device_rtc,
 	&s3c_device_wdt,
+	&s5p_device_ehci,
+	&s5p_device_fimc0,
+	&s5p_device_fimc1,
+	&s5p_device_fimc2,
+	&s5p_device_fimc3,
 	&exynos4_device_ac97,
 	&exynos4_device_i2s0,
 	&samsung_device_keypad,
+	&s5p_device_mfc,
+	&s5p_device_mfc_l,
+	&s5p_device_mfc_r,
 	&exynos4_device_pd[PD_MFC],
 	&exynos4_device_pd[PD_G3D],
 	&exynos4_device_pd[PD_LCD0],
@@ -258,6 +280,8 @@ static struct platform_device *smdkv310_devices[] __initdata = {
 	&smdkv310_lcd_lte480wv,
 	&smdkv310_smsc911x,
 	&exynos4_device_ahci,
+	&s5p_device_hdmi,
+	&s5p_device_mixer,
 };
 
 static void __init smdkv310_smsc911x_init(void)
@@ -294,6 +318,18 @@ static struct platform_pwm_backlight_data smdkv310_bl_data = {
 	.pwm_period_ns  = 1000,
 };
 
+static void s5p_tv_setup(void)
+{
+	/* direct HPD to HDMI chip */
+	WARN_ON(gpio_request_one(EXYNOS4_GPX3(7), GPIOF_IN, "hpd-plug"));
+	s3c_gpio_cfgpin(EXYNOS4_GPX3(7), S3C_GPIO_SFN(0x3));
+	s3c_gpio_setpull(EXYNOS4_GPX3(7), S3C_GPIO_PULL_NONE);
+
+	/* setup dependencies between TV devices */
+	s5p_device_hdmi.dev.parent = &exynos4_device_pd[PD_TV].dev;
+	s5p_device_mixer.dev.parent = &exynos4_device_pd[PD_TV].dev;
+}
+
 static void __init smdkv310_map_io(void)
 {
 	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
@@ -301,6 +337,11 @@ static void __init smdkv310_map_io(void)
 	s3c24xx_init_uarts(smdkv310_uartcfgs, ARRAY_SIZE(smdkv310_uartcfgs));
 }
 
+static void __init smdkv310_reserve(void)
+{
+	s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20);
+}
+
 static void __init smdkv310_machine_init(void)
 {
 	s3c_i2c1_set_platdata(NULL);
@@ -313,12 +354,19 @@ static void __init smdkv310_machine_init(void)
 	s3c_sdhci2_set_platdata(&smdkv310_hsmmc2_pdata);
 	s3c_sdhci3_set_platdata(&smdkv310_hsmmc3_pdata);
 
+	s5p_tv_setup();
+	s5p_i2c_hdmiphy_set_platdata(NULL);
+
 	samsung_keypad_set_platdata(&smdkv310_keypad_data);
 
 	samsung_bl_set(&smdkv310_bl_gpio_info, &smdkv310_bl_data);
 	s5p_fimd0_set_platdata(&smdkv310_lcd0_pdata);
 
+	smdkv310_ehci_init();
+	clk_xusbxti.rate = 24000000;
+
 	platform_add_devices(smdkv310_devices, ARRAY_SIZE(smdkv310_devices));
+	s5p_device_mfc.dev.parent = &exynos4_device_pd[PD_MFC].dev;
 }
 
 MACHINE_START(SMDKV310, "SMDKV310")
@@ -329,6 +377,7 @@ MACHINE_START(SMDKV310, "SMDKV310")
 	.map_io		= smdkv310_map_io,
 	.init_machine	= smdkv310_machine_init,
 	.timer		= &exynos4_timer,
+	.reserve	= &smdkv310_reserve,
 MACHINE_END
 
 MACHINE_START(SMDKC210, "SMDKC210")

arch/arm/mach-exynos4/mach-universal_c210.c

@@ -13,6 +13,7 @@
 #include <linux/i2c.h>
 #include <linux/gpio_keys.h>
 #include <linux/gpio.h>
+#include <linux/fb.h>
 #include <linux/mfd/max8998.h>
 #include <linux/regulator/machine.h>
 #include <linux/regulator/fixed.h>
@@ -31,12 +32,21 @@
 #include <plat/devs.h>
 #include <plat/iic.h>
 #include <plat/gpio-cfg.h>
+#include <plat/fb.h>
 #include <plat/mfc.h>
 #include <plat/sdhci.h>
 #include <plat/pd.h>
+#include <plat/regs-fb-v4.h>
+#include <plat/fimc-core.h>
+#include <plat/camport.h>
+#include <plat/mipi_csis.h>
 
 #include <mach/map.h>
 
+#include <media/v4l2-mediabus.h>
+#include <media/s5p_fimc.h>
+#include <media/m5mols.h>
+
 /* Following are default values for UCON, ULCON and UFCON UART registers */
 #define UNIVERSAL_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
 				 S3C2410_UCON_RXILEVEL |	\
@@ -110,6 +120,9 @@ static struct regulator_consumer_supply lp3974_buck1_consumer =
 static struct regulator_consumer_supply lp3974_buck2_consumer =
 	REGULATOR_SUPPLY("vddg3d", NULL);
 
+static struct regulator_consumer_supply lp3974_buck3_consumer =
+	REGULATOR_SUPPLY("vdet", "s5p-sdo");
+
 static struct regulator_init_data lp3974_buck1_data = {
 	.constraints	= {
 		.name		= "VINT_1.1V",
@@ -153,6 +166,8 @@ static struct regulator_init_data lp3974_buck3_data = {
 			.enabled	= 1,
 		},
 	},
+	.num_consumer_supplies = 1,
+	.consumer_supplies = &lp3974_buck3_consumer,
 };
 
 static struct regulator_init_data lp3974_buck4_data = {
@@ -181,6 +196,12 @@ static struct regulator_init_data lp3974_ldo2_data = {
 	},
 };
 
+static struct regulator_consumer_supply lp3974_ldo3_consumer[] = {
+	REGULATOR_SUPPLY("vdd", "exynos4-hdmi"),
+	REGULATOR_SUPPLY("vdd_pll", "exynos4-hdmi"),
+	REGULATOR_SUPPLY("vdd11", "s5p-mipi-csis.0"),
+};
+
 static struct regulator_init_data lp3974_ldo3_data = {
 	.constraints	= {
 		.name		= "VUSB+MIPI_1.1V",
@@ -192,6 +213,12 @@ static struct regulator_init_data lp3974_ldo3_data = {
 			.disabled	= 1,
 		},
 	},
+	.num_consumer_supplies = ARRAY_SIZE(lp3974_ldo3_consumer),
+	.consumer_supplies = lp3974_ldo3_consumer,
+};
+
+static struct regulator_consumer_supply lp3974_ldo4_consumer[] = {
+	REGULATOR_SUPPLY("vdd_osc", "exynos4-hdmi"),
 };
 
 static struct regulator_init_data lp3974_ldo4_data = {
@@ -205,6 +232,8 @@ static struct regulator_init_data lp3974_ldo4_data = {
 			.disabled	= 1,
 		},
 	},
+	.num_consumer_supplies = ARRAY_SIZE(lp3974_ldo4_consumer),
+	.consumer_supplies = lp3974_ldo4_consumer,
 };
 
 static struct regulator_init_data lp3974_ldo5_data = {
@@ -233,6 +262,10 @@ static struct regulator_init_data lp3974_ldo6_data = {
 	},
 };
 
+static struct regulator_consumer_supply lp3974_ldo7_consumer[] = {
+	REGULATOR_SUPPLY("vdd18", "s5p-mipi-csis.0"),
+};
+
 static struct regulator_init_data lp3974_ldo7_data = {
 	.constraints	= {
 		.name		= "VLCD+VMIPI_1.8V",
@@ -244,6 +277,12 @@ static struct regulator_init_data lp3974_ldo7_data = {
 			.disabled	= 1,
 		},
 	},
+	.num_consumer_supplies	= ARRAY_SIZE(lp3974_ldo7_consumer),
+	.consumer_supplies	= lp3974_ldo7_consumer,
+};
+
+static struct regulator_consumer_supply lp3974_ldo8_consumer[] = {
+	REGULATOR_SUPPLY("vdd33a_dac", "s5p-sdo"),
 };
 
 static struct regulator_init_data lp3974_ldo8_data = {
@@ -257,6 +296,8 @@ static struct regulator_init_data lp3974_ldo8_data = {
 			.disabled	= 1,
 		},
 	},
+	.num_consumer_supplies = ARRAY_SIZE(lp3974_ldo8_consumer),
+	.consumer_supplies = lp3974_ldo8_consumer,
 };
 
 static struct regulator_init_data lp3974_ldo9_data = {
@@ -286,6 +327,9 @@ static struct regulator_init_data lp3974_ldo10_data = {
 	},
 };
 
+static struct regulator_consumer_supply lp3974_ldo11_consumer =
+	REGULATOR_SUPPLY("dig_28", "0-001f");
+
 static struct regulator_init_data lp3974_ldo11_data = {
 	.constraints	= {
 		.name		= "CAM_AF_3.3V",
@@ -297,6 +341,8 @@ static struct regulator_init_data lp3974_ldo11_data = {
 			.disabled	= 1,
 		},
 	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &lp3974_ldo11_consumer,
 };
 
 static struct regulator_init_data lp3974_ldo12_data = {
@@ -325,6 +371,9 @@ static struct regulator_init_data lp3974_ldo13_data = {
 	},
 };
 
+static struct regulator_consumer_supply lp3974_ldo14_consumer =
+	REGULATOR_SUPPLY("dig_18", "0-001f");
+
 static struct regulator_init_data lp3974_ldo14_data = {
 	.constraints	= {
 		.name		= "CAM_I_HOST_1.8V",
@@ -336,8 +385,14 @@ static struct regulator_init_data lp3974_ldo14_data = {
 			.disabled	= 1,
 		},
 	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &lp3974_ldo14_consumer,
 };
 
+
+static struct regulator_consumer_supply lp3974_ldo15_consumer =
+	REGULATOR_SUPPLY("dig_12", "0-001f");
+
 static struct regulator_init_data lp3974_ldo15_data = {
 	.constraints	= {
 		.name		= "CAM_S_DIG+FM33_CORE_1.2V",
@@ -349,6 +404,12 @@ static struct regulator_init_data lp3974_ldo15_data = {
 			.disabled	= 1,
 		},
 	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &lp3974_ldo15_consumer,
+};
+
+static struct regulator_consumer_supply lp3974_ldo16_consumer[] = {
+	REGULATOR_SUPPLY("a_sensor", "0-001f"),
 };
 
 static struct regulator_init_data lp3974_ldo16_data = {
@@ -362,6 +423,8 @@ static struct regulator_init_data lp3974_ldo16_data = {
 			.disabled	= 1,
 		},
 	},
+	.num_consumer_supplies	= ARRAY_SIZE(lp3974_ldo16_consumer),
+	.consumer_supplies	= lp3974_ldo16_consumer,
 };
 
 static struct regulator_init_data lp3974_ldo17_data = {
@@ -472,6 +535,43 @@ static struct max8998_platform_data universal_lp3974_pdata = {
 	.wakeup			= true,
 };
 
+
+enum fixed_regulator_id {
+	FIXED_REG_ID_MMC0,
+	FIXED_REG_ID_HDMI_5V,
+	FIXED_REG_ID_CAM_S_IF,
+	FIXED_REG_ID_CAM_I_CORE,
+	FIXED_REG_ID_CAM_VT_DIO,
+};
+
+static struct regulator_consumer_supply hdmi_fixed_consumer =
+	REGULATOR_SUPPLY("hdmi-en", "exynos4-hdmi");
+
+static struct regulator_init_data hdmi_fixed_voltage_init_data = {
+	.constraints		= {
+		.name		= "HDMI_5V",
+		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &hdmi_fixed_consumer,
+};
+
+static struct fixed_voltage_config hdmi_fixed_voltage_config = {
+	.supply_name		= "HDMI_EN1",
+	.microvolts		= 5000000,
+	.gpio			= EXYNOS4_GPE0(1),
+	.enable_high		= true,
+	.init_data		= &hdmi_fixed_voltage_init_data,
+};
+
+static struct platform_device hdmi_fixed_voltage = {
+	.name			= "reg-fixed-voltage",
+	.id			= FIXED_REG_ID_HDMI_5V,
+	.dev			= {
+		.platform_data	= &hdmi_fixed_voltage_config,
+	},
+};
+
 /* GPIO I2C 5 (PMIC) */
 static struct i2c_board_info i2c5_devs[] __initdata = {
 	{
@@ -573,6 +673,11 @@ static void __init universal_touchkey_init(void)
 	gpio_direction_output(gpio, 1);
 }
 
+static struct s3c2410_platform_i2c universal_i2c0_platdata __initdata = {
+	.frequency	= 300 * 1000,
+	.sda_delay	= 200,
+};
+
 /* GPIO KEYS */
 static struct gpio_keys_button universal_gpio_keys_tables[] = {
 	{
@@ -658,7 +763,7 @@ static struct fixed_voltage_config mmc0_fixed_voltage_config = {
 
 static struct platform_device mmc0_fixed_voltage = {
 	.name			= "reg-fixed-voltage",
-	.id			= 0,
+	.id			= FIXED_REG_ID_MMC0,
 	.dev			= {
 		.platform_data	= &mmc0_fixed_voltage_config,
 	},
@@ -692,18 +797,170 @@ static void __init universal_sdhci_init(void)
 	s3c_sdhci3_set_platdata(&universal_hsmmc3_data);
 }
 
-/* I2C0 */
-static struct i2c_board_info i2c0_devs[] __initdata = {
-	/* Camera, To be updated */
-};
-
 /* I2C1 */
 static struct i2c_board_info i2c1_devs[] __initdata = {
 	/* Gyro, To be updated */
 };
 
+/* Frame Buffer */
+static struct s3c_fb_pd_win universal_fb_win0 = {
+	.win_mode = {
+		.left_margin	= 16,
+		.right_margin	= 16,
+		.upper_margin	= 2,
+		.lower_margin	= 28,
+		.hsync_len	= 2,
+		.vsync_len	= 1,
+		.xres		= 480,
+		.yres		= 800,
+		.refresh	= 55,
+	},
+	.max_bpp	= 32,
+	.default_bpp	= 16,
+};
+
+static struct s3c_fb_platdata universal_lcd_pdata __initdata = {
+	.win[0]		= &universal_fb_win0,
+	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB |
+			  VIDCON0_CLKSEL_LCD,
+	.vidcon1	= VIDCON1_INV_VCLK | VIDCON1_INV_VDEN
+			  | VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+	.setup_gpio	= exynos4_fimd0_gpio_setup_24bpp,
+};
+
+static struct regulator_consumer_supply cam_i_core_supply =
+	REGULATOR_SUPPLY("core", "0-001f");
+
+static struct regulator_init_data cam_i_core_reg_init_data = {
+	.constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS },
+	.num_consumer_supplies = 1,
+	.consumer_supplies = &cam_i_core_supply,
+};
+
+static struct fixed_voltage_config cam_i_core_fixed_voltage_cfg = {
+	.supply_name	= "CAM_I_CORE_1.2V",
+	.microvolts	= 1200000,
+	.gpio		= EXYNOS4_GPE2(2),	/* CAM_8M_CORE_EN */
+	.enable_high	= 1,
+	.init_data	= &cam_i_core_reg_init_data,
+};
+
+static struct platform_device cam_i_core_fixed_reg_dev = {
+	.name = "reg-fixed-voltage", .id = FIXED_REG_ID_CAM_I_CORE,
+	.dev = { .platform_data	= &cam_i_core_fixed_voltage_cfg },
+};
+
+static struct regulator_consumer_supply cam_s_if_supply =
+	REGULATOR_SUPPLY("d_sensor", "0-001f");
+
+static struct regulator_init_data cam_s_if_reg_init_data = {
+	.constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS },
+	.num_consumer_supplies = 1,
+	.consumer_supplies = &cam_s_if_supply,
+};
+
+static struct fixed_voltage_config cam_s_if_fixed_voltage_cfg = {
+	.supply_name	= "CAM_S_IF_1.8V",
+	.microvolts	= 1800000,
+	.gpio		= EXYNOS4_GPE3(0),	/* CAM_PWR_EN1 */
+	.enable_high	= 1,
+	.init_data	= &cam_s_if_reg_init_data,
+};
+
+static struct platform_device cam_s_if_fixed_reg_dev = {
+	.name = "reg-fixed-voltage", .id = FIXED_REG_ID_CAM_S_IF,
+	.dev = { .platform_data	= &cam_s_if_fixed_voltage_cfg },
+};
+
+static struct s5p_platform_mipi_csis mipi_csis_platdata = {
+	.clk_rate	= 166000000UL,
+	.lanes		= 2,
+	.alignment	= 32,
+	.hs_settle	= 12,
+	.phy_enable	= s5p_csis_phy_enable,
+};
+
+#define GPIO_CAM_LEVEL_EN(n)	EXYNOS4_GPE4(n + 3)
+#define GPIO_CAM_8M_ISP_INT	EXYNOS4_GPX1(5)	/* XEINT_13 */
+#define GPIO_CAM_MEGA_nRST	EXYNOS4_GPE2(5)
+
+static int m5mols_set_power(struct device *dev, int on)
+{
+	gpio_set_value(GPIO_CAM_LEVEL_EN(1), !on);
+	gpio_set_value(GPIO_CAM_LEVEL_EN(2), !!on);
+	return 0;
+}
+
+static struct m5mols_platform_data m5mols_platdata = {
+	.gpio_reset	= GPIO_CAM_MEGA_nRST,
+	.reset_polarity	= 0,
+	.set_power	= m5mols_set_power,
+};
+
+static struct i2c_board_info m5mols_board_info = {
+	I2C_BOARD_INFO("M5MOLS", 0x1F),
+	.platform_data = &m5mols_platdata,
+};
+
+static struct s5p_fimc_isp_info universal_camera_sensors[] = {
+	{
+		.mux_id		= 0,
+		.flags		= V4L2_MBUS_PCLK_SAMPLE_FALLING |
+				  V4L2_MBUS_VSYNC_ACTIVE_LOW,
+		.bus_type	= FIMC_MIPI_CSI2,
+		.board_info	= &m5mols_board_info,
+		.i2c_bus_num	= 0,
+		.clk_frequency	= 21600000UL,
+		.csi_data_align	= 32,
+	},
+};
+
+static struct s5p_platform_fimc fimc_md_platdata = {
+	.isp_info	= universal_camera_sensors,
+	.num_clients	= ARRAY_SIZE(universal_camera_sensors),
+};
+
+struct platform_device s5p_device_fimc_md = {
+	.name	= "s5p-fimc-md",
+	.id	= -1,
+};
+
+static struct gpio universal_camera_gpios[] = {
+	{ GPIO_CAM_LEVEL_EN(1),	GPIOF_OUT_INIT_HIGH, "CAM_LVL_EN1" },
+	{ GPIO_CAM_LEVEL_EN(2),	GPIOF_OUT_INIT_LOW,  "CAM_LVL_EN2" },
+	{ GPIO_CAM_8M_ISP_INT,	GPIOF_IN,            "8M_ISP_INT"  },
+	{ GPIO_CAM_MEGA_nRST,	GPIOF_OUT_INIT_LOW,  "CAM_8M_NRST" },
+};
+
+static void universal_camera_init(void)
+{
+	s3c_set_platdata(&mipi_csis_platdata, sizeof(mipi_csis_platdata),
+			 &s5p_device_mipi_csis0);
+	s3c_set_platdata(&fimc_md_platdata,  sizeof(fimc_md_platdata),
+			 &s5p_device_fimc_md);
+
+	if (gpio_request_array(universal_camera_gpios,
+			       ARRAY_SIZE(universal_camera_gpios))) {
+		pr_err("%s: GPIO request failed\n", __func__);
+		return;
+	}
+
+	if (!s3c_gpio_cfgpin(GPIO_CAM_8M_ISP_INT, S3C_GPIO_SFN(0xf)))
+		m5mols_board_info.irq = gpio_to_irq(GPIO_CAM_8M_ISP_INT);
+	else
+		pr_err("Failed to configure 8M_ISP_INT GPIO\n");
+
+	/* Free GPIOs controlled directly by the sensor drivers. */
+	gpio_free(GPIO_CAM_MEGA_nRST);
+	gpio_free(GPIO_CAM_8M_ISP_INT);
+
+	if (exynos4_fimc_setup_gpio(S5P_CAMPORT_A))
+		pr_err("Camera port A setup failed\n");
+}
+
 static struct platform_device *universal_devices[] __initdata = {
 	/* Samsung Platform Devices */
+	&s5p_device_mipi_csis0,
 	&s5p_device_fimc0,
 	&s5p_device_fimc1,
 	&s5p_device_fimc2,
@@ -712,17 +969,30 @@ static struct platform_device *universal_devices[] __initdata = {
 	&s3c_device_hsmmc0,
 	&s3c_device_hsmmc2,
 	&s3c_device_hsmmc3,
+	&s3c_device_i2c0,
 	&s3c_device_i2c3,
 	&s3c_device_i2c5,
+	&s5p_device_i2c_hdmiphy,
+	&hdmi_fixed_voltage,
+	&exynos4_device_pd[PD_TV],
+	&s5p_device_hdmi,
+	&s5p_device_sdo,
+	&s5p_device_mixer,
 
 	/* Universal Devices */
 	&i2c_gpio12,
 	&universal_gpio_keys,
 	&s5p_device_onenand,
+	&s5p_device_fimd0,
 	&s5p_device_mfc,
 	&s5p_device_mfc_l,
 	&s5p_device_mfc_r,
 	&exynos4_device_pd[PD_MFC],
+	&exynos4_device_pd[PD_LCD0],
+	&exynos4_device_pd[PD_CAM],
+	&cam_i_core_fixed_reg_dev,
+	&cam_s_if_fixed_reg_dev,
+	&s5p_device_fimc_md,
 };
 
 static void __init universal_map_io(void)
@@ -732,6 +1002,20 @@ static void __init universal_map_io(void)
 	s3c24xx_init_uarts(universal_uartcfgs, ARRAY_SIZE(universal_uartcfgs));
 }
 
+void s5p_tv_setup(void)
+{
+	/* direct HPD to HDMI chip */
+	gpio_request(EXYNOS4_GPX3(7), "hpd-plug");
+
+	gpio_direction_input(EXYNOS4_GPX3(7));
+	s3c_gpio_cfgpin(EXYNOS4_GPX3(7), S3C_GPIO_SFN(0x3));
+	s3c_gpio_setpull(EXYNOS4_GPX3(7), S3C_GPIO_PULL_NONE);
+
+	/* setup dependencies between TV devices */
+	s5p_device_hdmi.dev.parent = &exynos4_device_pd[PD_TV].dev;
+	s5p_device_mixer.dev.parent = &exynos4_device_pd[PD_TV].dev;
+}
+
 static void __init universal_reserve(void)
 {
 	s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20);
@@ -740,8 +1024,9 @@ static void __init universal_reserve(void)
 static void __init universal_machine_init(void)
 {
 	universal_sdhci_init();
+	s5p_tv_setup();
 
-	i2c_register_board_info(0, i2c0_devs, ARRAY_SIZE(i2c0_devs));
+	s3c_i2c0_set_platdata(&universal_i2c0_platdata);
 	i2c_register_board_info(1, i2c1_devs, ARRAY_SIZE(i2c1_devs));
 
 	universal_tsp_init();
@@ -749,15 +1034,28 @@ static void __init universal_machine_init(void)
 	i2c_register_board_info(3, i2c3_devs, ARRAY_SIZE(i2c3_devs));
 
 	s3c_i2c5_set_platdata(NULL);
+	s5p_i2c_hdmiphy_set_platdata(NULL);
 	i2c_register_board_info(5, i2c5_devs, ARRAY_SIZE(i2c5_devs));
 
+	s5p_fimd0_set_platdata(&universal_lcd_pdata);
+
 	universal_touchkey_init();
 	i2c_register_board_info(I2C_GPIO_BUS_12, i2c_gpio12_devs,
 			ARRAY_SIZE(i2c_gpio12_devs));
 
+	universal_camera_init();
+
 	/* Last */
 	platform_add_devices(universal_devices, ARRAY_SIZE(universal_devices));
+
 	s5p_device_mfc.dev.parent = &exynos4_device_pd[PD_MFC].dev;
+	s5p_device_fimd0.dev.parent = &exynos4_device_pd[PD_LCD0].dev;
+
+	s5p_device_fimc0.dev.parent = &exynos4_device_pd[PD_CAM].dev;
+	s5p_device_fimc1.dev.parent = &exynos4_device_pd[PD_CAM].dev;
+	s5p_device_fimc2.dev.parent = &exynos4_device_pd[PD_CAM].dev;
+	s5p_device_fimc3.dev.parent = &exynos4_device_pd[PD_CAM].dev;
+	s5p_device_mipi_csis0.dev.parent = &exynos4_device_pd[PD_CAM].dev;
 }
 
 MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210")

arch/arm/mach-exynos4/pm.c

@@ -339,6 +339,13 @@ static int exynos4_pm_suspend(void)
 	tmp &= ~S5P_CENTRAL_LOWPWR_CFG;
 	__raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION);
 
+	if (soc_is_exynos4212()) {
+		tmp = __raw_readl(S5P_CENTRAL_SEQ_OPTION);
+		tmp &= ~(S5P_USE_STANDBYWFI_ISP_ARM |
+			 S5P_USE_STANDBYWFE_ISP_ARM);
+		__raw_writel(tmp, S5P_CENTRAL_SEQ_OPTION);
+	}
+
 	/* Save Power control register */
 	asm ("mrc p15, 0, %0, c15, c0, 0"
 	     : "=r" (tmp) : : "cc");

arch/arm/mach-exynos4/pmu.c

@@ -16,160 +16,215 @@
 #include <mach/regs-clock.h>
 #include <mach/pmu.h>
 
-static void __iomem *sys_powerdown_reg[] = {
-	S5P_ARM_CORE0_LOWPWR,
-	S5P_DIS_IRQ_CORE0,
-	S5P_DIS_IRQ_CENTRAL0,
-	S5P_ARM_CORE1_LOWPWR,
-	S5P_DIS_IRQ_CORE1,
-	S5P_DIS_IRQ_CENTRAL1,
-	S5P_ARM_COMMON_LOWPWR,
-	S5P_L2_0_LOWPWR,
-	S5P_L2_1_LOWPWR,
-	S5P_CMU_ACLKSTOP_LOWPWR,
-	S5P_CMU_SCLKSTOP_LOWPWR,
-	S5P_CMU_RESET_LOWPWR,
-	S5P_APLL_SYSCLK_LOWPWR,
-	S5P_MPLL_SYSCLK_LOWPWR,
-	S5P_VPLL_SYSCLK_LOWPWR,
-	S5P_EPLL_SYSCLK_LOWPWR,
-	S5P_CMU_CLKSTOP_GPS_ALIVE_LOWPWR,
-	S5P_CMU_RESET_GPSALIVE_LOWPWR,
-	S5P_CMU_CLKSTOP_CAM_LOWPWR,
-	S5P_CMU_CLKSTOP_TV_LOWPWR,
-	S5P_CMU_CLKSTOP_MFC_LOWPWR,
-	S5P_CMU_CLKSTOP_G3D_LOWPWR,
-	S5P_CMU_CLKSTOP_LCD0_LOWPWR,
-	S5P_CMU_CLKSTOP_LCD1_LOWPWR,
-	S5P_CMU_CLKSTOP_MAUDIO_LOWPWR,
-	S5P_CMU_CLKSTOP_GPS_LOWPWR,
-	S5P_CMU_RESET_CAM_LOWPWR,
-	S5P_CMU_RESET_TV_LOWPWR,
-	S5P_CMU_RESET_MFC_LOWPWR,
-	S5P_CMU_RESET_G3D_LOWPWR,
-	S5P_CMU_RESET_LCD0_LOWPWR,
-	S5P_CMU_RESET_LCD1_LOWPWR,
-	S5P_CMU_RESET_MAUDIO_LOWPWR,
-	S5P_CMU_RESET_GPS_LOWPWR,
-	S5P_TOP_BUS_LOWPWR,
-	S5P_TOP_RETENTION_LOWPWR,
-	S5P_TOP_PWR_LOWPWR,
-	S5P_LOGIC_RESET_LOWPWR,
-	S5P_ONENAND_MEM_LOWPWR,
-	S5P_MODIMIF_MEM_LOWPWR,
-	S5P_G2D_ACP_MEM_LOWPWR,
-	S5P_USBOTG_MEM_LOWPWR,
-	S5P_HSMMC_MEM_LOWPWR,
-	S5P_CSSYS_MEM_LOWPWR,
-	S5P_SECSS_MEM_LOWPWR,
-	S5P_PCIE_MEM_LOWPWR,
-	S5P_SATA_MEM_LOWPWR,
-	S5P_PAD_RETENTION_DRAM_LOWPWR,
-	S5P_PAD_RETENTION_MAUDIO_LOWPWR,
-	S5P_PAD_RETENTION_GPIO_LOWPWR,
-	S5P_PAD_RETENTION_UART_LOWPWR,
-	S5P_PAD_RETENTION_MMCA_LOWPWR,
-	S5P_PAD_RETENTION_MMCB_LOWPWR,
-	S5P_PAD_RETENTION_EBIA_LOWPWR,
-	S5P_PAD_RETENTION_EBIB_LOWPWR,
-	S5P_PAD_RETENTION_ISOLATION_LOWPWR,
-	S5P_PAD_RETENTION_ALV_SEL_LOWPWR,
-	S5P_XUSBXTI_LOWPWR,
-	S5P_XXTI_LOWPWR,
-	S5P_EXT_REGULATOR_LOWPWR,
-	S5P_GPIO_MODE_LOWPWR,
-	S5P_GPIO_MODE_MAUDIO_LOWPWR,
-	S5P_CAM_LOWPWR,
-	S5P_TV_LOWPWR,
-	S5P_MFC_LOWPWR,
-	S5P_G3D_LOWPWR,
-	S5P_LCD0_LOWPWR,
-	S5P_LCD1_LOWPWR,
-	S5P_MAUDIO_LOWPWR,
-	S5P_GPS_LOWPWR,
-	S5P_GPS_ALIVE_LOWPWR,
+static struct exynos4_pmu_conf *exynos4_pmu_config;
+
+static struct exynos4_pmu_conf exynos4210_pmu_config[] = {
+	/* { .reg = address, .val = { AFTR, LPA, SLEEP } */
+	{ S5P_ARM_CORE0_LOWPWR,			{ 0x0, 0x0, 0x2 } },
+	{ S5P_DIS_IRQ_CORE0,			{ 0x0, 0x0, 0x0 } },
+	{ S5P_DIS_IRQ_CENTRAL0,			{ 0x0, 0x0, 0x0 } },
+	{ S5P_ARM_CORE1_LOWPWR,			{ 0x0, 0x0, 0x2 } },
+	{ S5P_DIS_IRQ_CORE1,			{ 0x0, 0x0, 0x0 } },
+	{ S5P_DIS_IRQ_CENTRAL1,			{ 0x0, 0x0, 0x0 } },
+	{ S5P_ARM_COMMON_LOWPWR,		{ 0x0, 0x0, 0x2 } },
+	{ S5P_L2_0_LOWPWR,			{ 0x2, 0x2, 0x3 } },
+	{ S5P_L2_1_LOWPWR,			{ 0x2, 0x2, 0x3 } },
+	{ S5P_CMU_ACLKSTOP_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_SCLKSTOP_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_RESET_LOWPWR,			{ 0x1, 0x1, 0x0 } },
+	{ S5P_APLL_SYSCLK_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_MPLL_SYSCLK_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_VPLL_SYSCLK_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_EPLL_SYSCLK_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_CLKSTOP_GPS_ALIVE_LOWPWR,	{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_RESET_GPSALIVE_LOWPWR,	{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_CLKSTOP_CAM_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_CLKSTOP_TV_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_CLKSTOP_MFC_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_CLKSTOP_G3D_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_CLKSTOP_LCD0_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_CLKSTOP_LCD1_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_CLKSTOP_MAUDIO_LOWPWR,	{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_CLKSTOP_GPS_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_RESET_CAM_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_RESET_TV_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_RESET_MFC_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_RESET_G3D_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_RESET_LCD0_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_RESET_LCD1_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_RESET_MAUDIO_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_RESET_GPS_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_TOP_BUS_LOWPWR,			{ 0x3, 0x0, 0x0 } },
+	{ S5P_TOP_RETENTION_LOWPWR,		{ 0x1, 0x0, 0x1 } },
+	{ S5P_TOP_PWR_LOWPWR,			{ 0x3, 0x0, 0x3 } },
+	{ S5P_LOGIC_RESET_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_ONENAND_MEM_LOWPWR,		{ 0x3, 0x0, 0x0 } },
+	{ S5P_MODIMIF_MEM_LOWPWR,		{ 0x3, 0x0, 0x0 } },
+	{ S5P_G2D_ACP_MEM_LOWPWR,		{ 0x3, 0x0, 0x0 } },
+	{ S5P_USBOTG_MEM_LOWPWR,		{ 0x3, 0x0, 0x0 } },
+	{ S5P_HSMMC_MEM_LOWPWR,			{ 0x3, 0x0, 0x0 } },
+	{ S5P_CSSYS_MEM_LOWPWR,			{ 0x3, 0x0, 0x0 } },
+	{ S5P_SECSS_MEM_LOWPWR,			{ 0x3, 0x0, 0x0 } },
+	{ S5P_PCIE_MEM_LOWPWR,			{ 0x3, 0x0, 0x0 } },
+	{ S5P_SATA_MEM_LOWPWR,			{ 0x3, 0x0, 0x0 } },
+	{ S5P_PAD_RETENTION_DRAM_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_PAD_RETENTION_MAUDIO_LOWPWR,	{ 0x1, 0x1, 0x0 } },
+	{ S5P_PAD_RETENTION_GPIO_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_PAD_RETENTION_UART_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_PAD_RETENTION_MMCA_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_PAD_RETENTION_MMCB_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_PAD_RETENTION_EBIA_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_PAD_RETENTION_EBIB_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_PAD_RETENTION_ISOLATION_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_PAD_RETENTION_ALV_SEL_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_XUSBXTI_LOWPWR,			{ 0x1, 0x1, 0x0 } },
+	{ S5P_XXTI_LOWPWR,			{ 0x1, 0x1, 0x0 } },
+	{ S5P_EXT_REGULATOR_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_GPIO_MODE_LOWPWR,			{ 0x1, 0x0, 0x0 } },
+	{ S5P_GPIO_MODE_MAUDIO_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_CAM_LOWPWR,			{ 0x7, 0x0, 0x0 } },
+	{ S5P_TV_LOWPWR,			{ 0x7, 0x0, 0x0 } },
+	{ S5P_MFC_LOWPWR,			{ 0x7, 0x0, 0x0 } },
+	{ S5P_G3D_LOWPWR,			{ 0x7, 0x0, 0x0 } },
+	{ S5P_LCD0_LOWPWR,			{ 0x7, 0x0, 0x0 } },
+	{ S5P_LCD1_LOWPWR,			{ 0x7, 0x0, 0x0 } },
+	{ S5P_MAUDIO_LOWPWR,			{ 0x7, 0x7, 0x0 } },
+	{ S5P_GPS_LOWPWR,			{ 0x7, 0x0, 0x0 } },
+	{ S5P_GPS_ALIVE_LOWPWR,			{ 0x7, 0x0, 0x0 } },
+	{ PMU_TABLE_END,},
 };
 
-static const unsigned int sys_powerdown_val[][NUM_SYS_POWERDOWN] = {
-	/* { AFTR, LPA, SLEEP }*/
-	{ 0, 0, 2 },	/* ARM_CORE0 */
-	{ 0, 0, 0 },	/* ARM_DIS_IRQ_CORE0 */
-	{ 0, 0, 0 },	/* ARM_DIS_IRQ_CENTRAL0 */
-	{ 0, 0, 2 },	/* ARM_CORE1 */
-	{ 0, 0, 0 },	/* ARM_DIS_IRQ_CORE1 */
-	{ 0, 0, 0 },	/* ARM_DIS_IRQ_CENTRAL1 */
-	{ 0, 0, 2 },	/* ARM_COMMON */
-	{ 2, 2, 3 },	/* ARM_CPU_L2_0 */
-	{ 2, 2, 3 },	/* ARM_CPU_L2_1 */
-	{ 1, 0, 0 },	/* CMU_ACLKSTOP */
-	{ 1, 0, 0 },	/* CMU_SCLKSTOP */
-	{ 1, 1, 0 },	/* CMU_RESET */
-	{ 1, 0, 0 },	/* APLL_SYSCLK */
-	{ 1, 0, 0 },	/* MPLL_SYSCLK */
-	{ 1, 0, 0 },	/* VPLL_SYSCLK */
-	{ 1, 1, 0 },	/* EPLL_SYSCLK */
-	{ 1, 1, 0 },	/* CMU_CLKSTOP_GPS_ALIVE */
-	{ 1, 1, 0 },	/* CMU_RESET_GPS_ALIVE */
-	{ 1, 1, 0 },	/* CMU_CLKSTOP_CAM */
-	{ 1, 1, 0 },	/* CMU_CLKSTOP_TV */
-	{ 1, 1, 0 },	/* CMU_CLKSTOP_MFC */
-	{ 1, 1, 0 },	/* CMU_CLKSTOP_G3D */
-	{ 1, 1, 0 },	/* CMU_CLKSTOP_LCD0 */
-	{ 1, 1, 0 },	/* CMU_CLKSTOP_LCD1 */
-	{ 1, 1, 0 },	/* CMU_CLKSTOP_MAUDIO */
-	{ 1, 1, 0 },	/* CMU_CLKSTOP_GPS */
-	{ 1, 1, 0 },	/* CMU_RESET_CAM */
-	{ 1, 1, 0 },	/* CMU_RESET_TV */
-	{ 1, 1, 0 },	/* CMU_RESET_MFC */
-	{ 1, 1, 0 },	/* CMU_RESET_G3D */
-	{ 1, 1, 0 },	/* CMU_RESET_LCD0 */
-	{ 1, 1, 0 },	/* CMU_RESET_LCD1 */
-	{ 1, 1, 0 },	/* CMU_RESET_MAUDIO */
-	{ 1, 1, 0 },	/* CMU_RESET_GPS */
-	{ 3, 0, 0 },	/* TOP_BUS */
-	{ 1, 0, 1 },	/* TOP_RETENTION */
-	{ 3, 0, 3 },	/* TOP_PWR */
-	{ 1, 1, 0 },	/* LOGIC_RESET */
-	{ 3, 0, 0 },	/* ONENAND_MEM */
-	{ 3, 0, 0 },	/* MODIMIF_MEM */
-	{ 3, 0, 0 },	/* G2D_ACP_MEM */
-	{ 3, 0, 0 },	/* USBOTG_MEM */
-	{ 3, 0, 0 },	/* HSMMC_MEM */
-	{ 3, 0, 0 },	/* CSSYS_MEM */
-	{ 3, 0, 0 },	/* SECSS_MEM */
-	{ 3, 0, 0 },	/* PCIE_MEM */
-	{ 3, 0, 0 },	/* SATA_MEM */
-	{ 1, 0, 0 },	/* PAD_RETENTION_DRAM */
-	{ 1, 1, 0 },	/* PAD_RETENTION_MAUDIO */
-	{ 1, 0, 0 },	/* PAD_RETENTION_GPIO */
-	{ 1, 0, 0 },	/* PAD_RETENTION_UART */
-	{ 1, 0, 0 },	/* PAD_RETENTION_MMCA */
-	{ 1, 0, 0 },	/* PAD_RETENTION_MMCB */
-	{ 1, 0, 0 },	/* PAD_RETENTION_EBIA */
-	{ 1, 0, 0 },	/* PAD_RETENTION_EBIB */
-	{ 1, 0, 0 },	/* PAD_RETENTION_ISOLATION */
-	{ 1, 0, 0 },	/* PAD_RETENTION_ALV_SEL */
-	{ 1, 1, 0 },	/* XUSBXTI */
-	{ 1, 1, 0 },	/* XXTI */
-	{ 1, 1, 0 },	/* EXT_REGULATOR */
-	{ 1, 0, 0 },	/* GPIO_MODE */
-	{ 1, 1, 0 },	/* GPIO_MODE_MAUDIO */
-	{ 7, 0, 0 },	/* CAM */
-	{ 7, 0, 0 },	/* TV */
-	{ 7, 0, 0 },	/* MFC */
-	{ 7, 0, 0 },	/* G3D */
-	{ 7, 0, 0 },	/* LCD0 */
-	{ 7, 0, 0 },	/* LCD1 */
-	{ 7, 7, 0 },	/* MAUDIO */
-	{ 7, 0, 0 },	/* GPS */
-	{ 7, 0, 0 },	/* GPS_ALIVE */
+static struct exynos4_pmu_conf exynos4212_pmu_config[] = {
+	{ S5P_ARM_CORE0_LOWPWR,			{ 0x0, 0x0, 0x2 } },
+	{ S5P_DIS_IRQ_CORE0,			{ 0x0, 0x0, 0x0 } },
+	{ S5P_DIS_IRQ_CENTRAL0,			{ 0x0, 0x0, 0x0 } },
+	{ S5P_ARM_CORE1_LOWPWR,			{ 0x0, 0x0, 0x2 } },
+	{ S5P_DIS_IRQ_CORE1,			{ 0x0, 0x0, 0x0 } },
+	{ S5P_DIS_IRQ_CENTRAL1,			{ 0x0, 0x0, 0x0 } },
+	{ S5P_ISP_ARM_LOWPWR,			{ 0x1, 0x0, 0x0 } },
+	{ S5P_DIS_IRQ_ISP_ARM_LOCAL_LOWPWR,	{ 0x0, 0x0, 0x0 } },
+	{ S5P_DIS_IRQ_ISP_ARM_CENTRAL_LOWPWR,	{ 0x0, 0x0, 0x0 } },
+	{ S5P_ARM_COMMON_LOWPWR,		{ 0x0, 0x0, 0x2 } },
+	{ S5P_L2_0_LOWPWR,			{ 0x0, 0x0, 0x3 } },
+	/* XXX_OPTION register should be set other field */
+	{ S5P_ARM_L2_0_OPTION,			{ 0x10, 0x10, 0x0 } },
+	{ S5P_L2_1_LOWPWR,			{ 0x0, 0x0, 0x3 } },
+	{ S5P_ARM_L2_1_OPTION,			{ 0x10, 0x10, 0x0 } },
+	{ S5P_CMU_ACLKSTOP_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_SCLKSTOP_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_RESET_LOWPWR,			{ 0x1, 0x1, 0x0 } },
+	{ S5P_DRAM_FREQ_DOWN_LOWPWR,		{ 0x1, 0x1, 0x1 } },
+	{ S5P_DDRPHY_DLLOFF_LOWPWR,		{ 0x1, 0x1, 0x1 } },
+	{ S5P_LPDDR_PHY_DLL_LOCK_LOWPWR,	{ 0x1, 0x1, 0x1 } },
+	{ S5P_CMU_ACLKSTOP_COREBLK_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_SCLKSTOP_COREBLK_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_RESET_COREBLK_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_APLL_SYSCLK_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_MPLL_SYSCLK_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_VPLL_SYSCLK_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_EPLL_SYSCLK_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_MPLLUSER_SYSCLK_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_CLKSTOP_GPS_ALIVE_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_RESET_GPSALIVE_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_CLKSTOP_CAM_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_CLKSTOP_TV_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_CLKSTOP_MFC_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_CLKSTOP_G3D_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_CLKSTOP_LCD0_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_CLKSTOP_ISP_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_CLKSTOP_MAUDIO_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_CLKSTOP_GPS_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_RESET_CAM_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_RESET_TV_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_RESET_MFC_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_RESET_G3D_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_RESET_LCD0_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_RESET_ISP_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_RESET_MAUDIO_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_CMU_RESET_GPS_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_TOP_BUS_LOWPWR,			{ 0x3, 0x0, 0x0 } },
+	{ S5P_TOP_RETENTION_LOWPWR,		{ 0x1, 0x0, 0x1 } },
+	{ S5P_TOP_PWR_LOWPWR,			{ 0x3, 0x0, 0x3 } },
+	{ S5P_TOP_BUS_COREBLK_LOWPWR,		{ 0x3, 0x0, 0x0 } },
+	{ S5P_TOP_RETENTION_COREBLK_LOWPWR,	{ 0x1, 0x0, 0x1 } },
+	{ S5P_TOP_PWR_COREBLK_LOWPWR,		{ 0x3, 0x0, 0x3 } },
+	{ S5P_LOGIC_RESET_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_OSCCLK_GATE_LOWPWR,		{ 0x1, 0x0, 0x1 } },
+	{ S5P_LOGIC_RESET_COREBLK_LOWPWR,	{ 0x1, 0x1, 0x0 } },
+	{ S5P_OSCCLK_GATE_COREBLK_LOWPWR,	{ 0x1, 0x0, 0x1 } },
+	{ S5P_ONENAND_MEM_LOWPWR,		{ 0x3, 0x0, 0x0 } },
+	{ S5P_ONENAND_MEM_OPTION,		{ 0x10, 0x10, 0x0 } },
+	{ S5P_HSI_MEM_LOWPWR,			{ 0x3, 0x0, 0x0 } },
+	{ S5P_HSI_MEM_OPTION,			{ 0x10, 0x10, 0x0 } },
+	{ S5P_G2D_ACP_MEM_LOWPWR,		{ 0x3, 0x0, 0x0 } },
+	{ S5P_G2D_ACP_MEM_OPTION,		{ 0x10, 0x10, 0x0 } },
+	{ S5P_USBOTG_MEM_LOWPWR,		{ 0x3, 0x0, 0x0 } },
+	{ S5P_USBOTG_MEM_OPTION,		{ 0x10, 0x10, 0x0 } },
+	{ S5P_HSMMC_MEM_LOWPWR,			{ 0x3, 0x0, 0x0 } },
+	{ S5P_HSMMC_MEM_OPTION,			{ 0x10, 0x10, 0x0 } },
+	{ S5P_CSSYS_MEM_LOWPWR,			{ 0x3, 0x0, 0x0 } },
+	{ S5P_CSSYS_MEM_OPTION,			{ 0x10, 0x10, 0x0 } },
+	{ S5P_SECSS_MEM_LOWPWR,			{ 0x3, 0x0, 0x0 } },
+	{ S5P_SECSS_MEM_OPTION,			{ 0x10, 0x10, 0x0 } },
+	{ S5P_ROTATOR_MEM_LOWPWR,		{ 0x3, 0x0, 0x0 } },
+	{ S5P_ROTATOR_MEM_OPTION,		{ 0x10, 0x10, 0x0 } },
+	{ S5P_PAD_RETENTION_DRAM_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_PAD_RETENTION_MAUDIO_LOWPWR,	{ 0x1, 0x1, 0x0 } },
+	{ S5P_PAD_RETENTION_GPIO_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_PAD_RETENTION_UART_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_PAD_RETENTION_MMCA_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_PAD_RETENTION_MMCB_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_PAD_RETENTION_EBIA_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_PAD_RETENTION_EBIB_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_PAD_RETENTION_GPIO_COREBLK_LOWPWR,{ 0x1, 0x0, 0x0 } },
+	{ S5P_PAD_RETENTION_ISOLATION_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_PAD_ISOLATION_COREBLK_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_PAD_RETENTION_ALV_SEL_LOWPWR,	{ 0x1, 0x0, 0x0 } },
+	{ S5P_XUSBXTI_LOWPWR,			{ 0x1, 0x1, 0x0 } },
+	{ S5P_XXTI_LOWPWR,			{ 0x1, 0x1, 0x0 } },
+	{ S5P_EXT_REGULATOR_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_GPIO_MODE_LOWPWR,			{ 0x1, 0x0, 0x0 } },
+	{ S5P_GPIO_MODE_COREBLK_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_GPIO_MODE_MAUDIO_LOWPWR,		{ 0x1, 0x1, 0x0 } },
+	{ S5P_TOP_ASB_RESET_LOWPWR,		{ 0x1, 0x1, 0x1 } },
+	{ S5P_TOP_ASB_ISOLATION_LOWPWR,		{ 0x1, 0x0, 0x1 } },
+	{ S5P_CAM_LOWPWR,			{ 0x7, 0x0, 0x0 } },
+	{ S5P_TV_LOWPWR,			{ 0x7, 0x0, 0x0 } },
+	{ S5P_MFC_LOWPWR,			{ 0x7, 0x0, 0x0 } },
+	{ S5P_G3D_LOWPWR,			{ 0x7, 0x0, 0x0 } },
+	{ S5P_LCD0_LOWPWR,			{ 0x7, 0x0, 0x0 } },
+	{ S5P_ISP_LOWPWR,			{ 0x7, 0x0, 0x0 } },
+	{ S5P_MAUDIO_LOWPWR,			{ 0x7, 0x7, 0x0 } },
+	{ S5P_GPS_LOWPWR,			{ 0x7, 0x0, 0x0 } },
+	{ S5P_GPS_ALIVE_LOWPWR,			{ 0x7, 0x0, 0x0 } },
+	{ S5P_CMU_SYSCLK_ISP_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ S5P_CMU_SYSCLK_GPS_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ PMU_TABLE_END,},
 };
 
 void exynos4_sys_powerdown_conf(enum sys_powerdown mode)
 {
-	unsigned int count = ARRAY_SIZE(sys_powerdown_reg);
+	unsigned int i;
+
+	for (i = 0; (exynos4_pmu_config[i].reg != PMU_TABLE_END) ; i++)
+		__raw_writel(exynos4_pmu_config[i].val[mode],
+				exynos4_pmu_config[i].reg);
+}
+
+static int __init exynos4_pmu_init(void)
+{
+	exynos4_pmu_config = exynos4210_pmu_config;
+
+	if (soc_is_exynos4210()) {
+		exynos4_pmu_config = exynos4210_pmu_config;
+		pr_info("EXYNOS4210 PMU Initialize\n");
+	} else if (soc_is_exynos4212()) {
+		exynos4_pmu_config = exynos4212_pmu_config;
+		pr_info("EXYNOS4212 PMU Initialize\n");
+	} else {
+		pr_info("EXYNOS4: PMU not supported\n");
+	}
 
-	for (; count > 0; count--)
-		__raw_writel(sys_powerdown_val[count - 1][mode],
-				sys_powerdown_reg[count - 1]);
+	return 0;
 }
+arch_initcall(exynos4_pmu_init);

arch/arm/mach-s3c2410/Kconfig

@@ -6,7 +6,6 @@ config CPU_S3C2410
 	bool
 	depends on ARCH_S3C2410
 	select CPU_ARM920T
-	select S3C_GPIO_PULL_UP
 	select S3C2410_CLOCK
 	select CPU_LLSERIAL_S3C2410
 	select S3C2410_PM if PM

arch/arm/mach-s3c2410/include/mach/dma.h

@@ -13,7 +13,6 @@
 #ifndef __ASM_ARCH_DMA_H
 #define __ASM_ARCH_DMA_H __FILE__
 
-#include <plat/dma.h>
 #include <linux/sysdev.h>
 
 #define MAX_DMA_TRANSFER_SIZE   0x100000 /* Data Unit is half word  */
@@ -51,6 +50,18 @@ enum dma_ch {
 	DMACH_MAX,		/* the end entry */
 };
 
+static inline bool samsung_dma_has_circular(void)
+{
+	return false;
+}
+
+static inline bool samsung_dma_is_dmadev(void)
+{
+	return false;
+}
+
+#include <plat/dma.h>
+
 #define DMACH_LOW_LEVEL	(1<<28)	/* use this to specifiy hardware ch no */
 
 /* we have 4 dma channels */
@@ -163,7 +174,7 @@ struct s3c2410_dma_chan {
 	struct s3c2410_dma_client *client;
 
 	/* channel configuration */
-	enum s3c2410_dmasrc	 source;
+	enum dma_data_direction	 source;
 	enum dma_ch		 req_ch;
 	unsigned long		 dev_addr;
 	unsigned long		 load_timeout;
@@ -196,9 +207,4 @@ struct s3c2410_dma_chan {
 
 typedef unsigned long dma_device_t;
 
-static inline bool s3c_dma_has_circular(void)
-{
-	return false;
-}
-
 #endif /* __ASM_ARCH_DMA_H */

arch/arm/mach-s3c2410/include/mach/gpio-fns.h

@@ -1,98 +1 @@
-/* arch/arm/mach-s3c2410/include/mach/gpio-fns.h
- *
- * Copyright (c) 2003-2009 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - hardware
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __MACH_GPIO_FNS_H
-#define __MACH_GPIO_FNS_H __FILE__
-
-/* These functions are in the to-be-removed category and it is strongly
- * encouraged not to use these in new code. They will be marked deprecated
- * very soon.
- *
- * Most of the functionality can be either replaced by the gpiocfg calls
- * for the s3c platform or by the generic GPIOlib API.
- *
- * As of 2.6.35-rc, these will be removed, with the few drivers using them
- * either replaced or given a wrapper until the calls can be removed.
-*/
-
-#include <plat/gpio-cfg.h>
-
-static inline void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int cfg)
-{
-	/* 1:1 mapping between cfgpin and setcfg calls at the moment */
-	s3c_gpio_cfgpin(pin, cfg);
-}
-
-/* external functions for GPIO support
- *
- * These allow various different clients to access the same GPIO
- * registers without conflicting. If your driver only owns the entire
- * GPIO register, then it is safe to ioremap/__raw_{read|write} to it.
-*/
-
-extern unsigned int s3c2410_gpio_getcfg(unsigned int pin);
-
-/* s3c2410_gpio_getirq
- *
- * turn the given pin number into the corresponding IRQ number
- *
- * returns:
- *	< 0 = no interrupt for this pin
- *	>=0 = interrupt number for the pin
-*/
-
-extern int s3c2410_gpio_getirq(unsigned int pin);
-
-/* s3c2410_gpio_irqfilter
- *
- * set the irq filtering on the given pin
- *
- * on = 0 => disable filtering
- *      1 => enable filtering
- *
- * config = S3C2410_EINTFLT_PCLK or S3C2410_EINTFLT_EXTCLK orred with
- *          width of filter (0 through 63)
- *
- *
-*/
-
-extern int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on,
-				  unsigned int config);
-
-/* s3c2410_gpio_pullup
- *
- * This call should be replaced with s3c_gpio_setpull().
- *
- * As a note, there is currently no distinction between pull-up and pull-down
- * in the s3c24xx series devices with only an on/off configuration.
- */
-
-/* s3c2410_gpio_pullup
- *
- * configure the pull-up control on the given pin
- *
- * to = 1 => disable the pull-up
- *      0 => enable the pull-up
- *
- * eg;
- *
- *   s3c2410_gpio_pullup(S3C2410_GPB(0), 0);
- *   s3c2410_gpio_pullup(S3C2410_GPE(8), 0);
-*/
-
-extern void s3c2410_gpio_pullup(unsigned int pin, unsigned int to);
-
-extern void s3c2410_gpio_setpin(unsigned int pin, unsigned int to);
-
-extern unsigned int s3c2410_gpio_getpin(unsigned int pin);
-
-#endif /* __MACH_GPIO_FNS_H */
+#include <plat/gpio-fns.h>

arch/arm/mach-s3c2410/include/mach/gpio-track.h

@@ -17,11 +17,11 @@
 
 #include <mach/regs-gpio.h>
 
-extern struct s3c_gpio_chip s3c24xx_gpios[];
+extern struct samsung_gpio_chip s3c24xx_gpios[];
 
-static inline struct s3c_gpio_chip *s3c_gpiolib_getchip(unsigned int pin)
+static inline struct samsung_gpio_chip *samsung_gpiolib_getchip(unsigned int pin)
 {
-	struct s3c_gpio_chip *chip;
+	struct samsung_gpio_chip *chip;
 
 	if (pin > S3C_GPIO_END)
 		return NULL;

arch/arm/mach-s3c2410/include/mach/pm-core.h

@@ -64,4 +64,4 @@ static inline void s3c_pm_arch_update_uart(void __iomem *regs,
 }
 
 static inline void s3c_pm_restored_gpios(void) { }
-static inline void s3c_pm_saved_gpios(void) { }
+static inline void samsung_pm_saved_gpios(void) { }

arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h

@@ -102,6 +102,7 @@
 #define S3C2443_PCLKCON_UART3		(1<<3)
 #define S3C2443_PCLKCON_IIC		(1<<4)
 #define S3C2443_PCLKCON_SDI		(1<<5)
+#define S3C2443_PCLKCON_HSSPI		(1<<6)
 #define S3C2443_PCLKCON_ADC		(1<<7)
 #define S3C2443_PCLKCON_AC97		(1<<8)
 #define S3C2443_PCLKCON_IIS		(1<<9)

arch/arm/mach-s3c2410/s3c2410.c

@@ -72,8 +72,8 @@ void __init s3c2410_init_uarts(struct s3c2410_uartcfg *cfg, int no)
 
 void __init s3c2410_map_io(void)
 {
-	s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_1up;
-	s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_1up;
+	s3c24xx_gpiocfg_default.set_pull = s3c24xx_gpio_setpull_1up;
+	s3c24xx_gpiocfg_default.get_pull = s3c24xx_gpio_getpull_1up;
 
 	iotable_init(s3c2410_iodesc, ARRAY_SIZE(s3c2410_iodesc));
 }

arch/arm/mach-s3c2412/dma.c

@@ -130,11 +130,11 @@ static struct s3c24xx_dma_map __initdata s3c2412_dma_mappings[] = {
 
 static void s3c2412_dma_direction(struct s3c2410_dma_chan *chan,
 				  struct s3c24xx_dma_map *map,
-				  enum s3c2410_dmasrc dir)
+				  enum dma_data_direction dir)
 {
 	unsigned long chsel;
 
-	if (dir == S3C2410_DMASRC_HW)
+	if (dir == DMA_FROM_DEVICE)
 		chsel = map->channels_rx[0];
 	else
 		chsel = map->channels[0];

arch/arm/mach-s3c2412/gpio.c

@@ -0,0 +1,62 @@
+/* linux/arch/arm/mach-s3c2412/gpio.c
+ *
+ * Copyright (c) 2007 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * http://armlinux.simtec.co.uk/.
+ *
+ * S3C2412/S3C2413 specific GPIO support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/gpio.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/regs-gpio.h>
+#include <mach/hardware.h>
+
+#include <plat/gpio-core.h>
+
+int s3c2412_gpio_set_sleepcfg(unsigned int pin, unsigned int state)
+{
+	struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin);
+	unsigned long offs = pin - chip->chip.base;
+	unsigned long flags;
+	unsigned long slpcon;
+
+	offs *= 2;
+
+	if (pin < S3C2410_GPB(0))
+		return -EINVAL;
+
+	if (pin >= S3C2410_GPF(0) &&
+	    pin <= S3C2410_GPG(16))
+		return -EINVAL;
+
+	if (pin > S3C2410_GPH(16))
+		return -EINVAL;
+
+	local_irq_save(flags);
+
+	slpcon = __raw_readl(chip->base + 0x0C);
+
+	slpcon &= ~(3 << offs);
+	slpcon |= state << offs;
+
+	__raw_writel(slpcon, chip->base + 0x0C);
+
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+EXPORT_SYMBOL(s3c2412_gpio_set_sleepcfg);

arch/arm/mach-s3c2416/Kconfig

@@ -13,7 +13,6 @@ config CPU_S3C2416
 	select CPU_ARM926T
 	select S3C2416_DMA if S3C2410_DMA
 	select CPU_LLSERIAL_S3C2440
-	select S3C_GPIO_PULL_UPDOWN
 	select SAMSUNG_CLKSRC
 	select S3C2443_CLOCK
 	help

arch/arm/mach-s3c2416/clock.c

@@ -38,6 +38,32 @@ static unsigned int armdiv[8] = {
 	[7] = 8,
 };
 
+static struct clksrc_clk hsspi_eplldiv = {
+	.clk = {
+		.name	= "hsspi-eplldiv",
+		.parent	= &clk_esysclk.clk,
+		.ctrlbit = (1 << 14),
+		.enable = s3c2443_clkcon_enable_s,
+	},
+	.reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 24 },
+};
+
+static struct clk *hsspi_sources[] = {
+	[0] = &hsspi_eplldiv.clk,
+	[1] = NULL, /* to fix */
+};
+
+static struct clksrc_clk hsspi_mux = {
+	.clk	= {
+		.name	= "hsspi-if",
+	},
+	.sources = &(struct clksrc_sources) {
+		.sources = hsspi_sources,
+		.nr_sources = ARRAY_SIZE(hsspi_sources),
+	},
+	.reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 18 },
+};
+
 static struct clksrc_clk hsmmc_div[] = {
 	[0] = {
 		.clk = {
@@ -114,6 +140,8 @@ void __init_or_cpufreq s3c2416_setup_clocks(void)
 
 
 static struct clksrc_clk *clksrcs[] __initdata = {
+	&hsspi_eplldiv,
+	&hsspi_mux,
 	&hsmmc_div[0],
 	&hsmmc_div[1],
 	&hsmmc_mux[0],

arch/arm/mach-s3c2416/s3c2416.c

@@ -118,8 +118,8 @@ void __init s3c2416_init_uarts(struct s3c2410_uartcfg *cfg, int no)
 
 void __init s3c2416_map_io(void)
 {
-	s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_updown;
-	s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_updown;
+	s3c24xx_gpiocfg_default.set_pull = samsung_gpio_setpull_updown;
+	s3c24xx_gpiocfg_default.get_pull = samsung_gpio_getpull_updown;
 
 	/* initialize device information early */
 	s3c2416_default_sdhci0();

arch/arm/mach-s3c2440/Kconfig

@@ -5,7 +5,6 @@
 config CPU_S3C2440
 	bool
 	select CPU_ARM920T
-	select S3C_GPIO_PULL_UP
 	select S3C2410_CLOCK
 	select S3C2410_PM if PM
 	select S3C2440_DMA if S3C2410_DMA
@@ -17,7 +16,6 @@ config CPU_S3C2440
 config CPU_S3C2442
 	bool
 	select CPU_ARM920T
-	select S3C_GPIO_PULL_DOWN
 	select S3C2410_CLOCK
 	select S3C2410_PM if PM
 	select CPU_S3C244X

arch/arm/mach-s3c2440/s3c2440.c

@@ -68,6 +68,6 @@ void __init s3c2440_map_io(void)
 {
 	s3c244x_map_io();
 
-	s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_1up;
-	s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_1up;
+	s3c24xx_gpiocfg_default.set_pull = s3c24xx_gpio_setpull_1up;
+	s3c24xx_gpiocfg_default.get_pull = s3c24xx_gpio_getpull_1up;
 }

arch/arm/mach-s3c2440/s3c2442.c

@@ -180,6 +180,6 @@ void __init s3c2442_map_io(void)
 {
 	s3c244x_map_io();
 
-	s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_1down;
-	s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_1down;
+	s3c24xx_gpiocfg_default.set_pull = s3c24xx_gpio_setpull_1down;
+	s3c24xx_gpiocfg_default.get_pull = s3c24xx_gpio_getpull_1down;
 }

arch/arm/mach-s3c2443/Kconfig

@@ -10,7 +10,6 @@ config CPU_S3C2443
 	select CPU_LLSERIAL_S3C2440
 	select SAMSUNG_CLKSRC
 	select S3C2443_CLOCK
-	select S3C_GPIO_PULL_S3C2443
 	help
 	  Support for the S3C2443 SoC from the S3C24XX line
 

arch/arm/mach-s3c2443/clock.c

@@ -57,10 +57,6 @@
 
 /* clock selections */
 
-static struct clk clk_i2s_ext = {
-	.name		= "i2s-ext",
-};
-
 /* armdiv
  *
  * this clock is sourced from msysclk and can have a number of
@@ -173,7 +169,7 @@ static struct clksrc_clk clk_arm = {
 
 static struct clksrc_clk clk_hsspi = {
 	.clk	= {
-		.name		= "hsspi",
+		.name		= "hsspi-if",
 		.parent		= &clk_esysclk.clk,
 		.ctrlbit	= S3C2443_SCLKCON_HSSPICLK,
 		.enable		= s3c2443_clkcon_enable_s,
@@ -235,48 +231,6 @@ static struct clk clk_hsmmc = {
 	},
 };
 
-/* i2s_eplldiv
- *
- * This clock is the output from the I2S divisor of ESYSCLK, and is separate
- * from the mux that comes after it (cannot merge into one single clock)
-*/
-
-static struct clksrc_clk clk_i2s_eplldiv = {
-	.clk	= {
-		.name		= "i2s-eplldiv",
-		.parent		= &clk_esysclk.clk,
-	},
-	.reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 12, },
-};
-
-/* i2s-ref
- *
- * i2s bus reference clock, selectable from external, esysclk or epllref
- *
- * Note, this used to be two clocks, but was compressed into one.
-*/
-
-struct clk *clk_i2s_srclist[] = {
-	[0] = &clk_i2s_eplldiv.clk,
-	[1] = &clk_i2s_ext,
-	[2] = &clk_epllref.clk,
-	[3] = &clk_epllref.clk,
-};
-
-static struct clksrc_clk clk_i2s = {
-	.clk	= {
-		.name		= "i2s-if",
-		.ctrlbit	= S3C2443_SCLKCON_I2SCLK,
-		.enable		= s3c2443_clkcon_enable_s,
-
-	},
-	.sources = &(struct clksrc_sources) {
-		.sources = clk_i2s_srclist,
-		.nr_sources = ARRAY_SIZE(clk_i2s_srclist),
-	},
-	.reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 14 },
-};
-
 /* standard clock definitions */
 
 static struct clk init_clocks_off[] = {
@@ -285,11 +239,6 @@ static struct clk init_clocks_off[] = {
 		.parent		= &clk_p,
 		.enable		= s3c2443_clkcon_enable_p,
 		.ctrlbit	= S3C2443_PCLKCON_SDI,
-	}, {
-		.name		= "iis",
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_IIS,
 	}, {
 		.name		= "spi",
 		.devname	= "s3c2410-spi.0",
@@ -312,8 +261,6 @@ static struct clk init_clocks[] = {
 
 static struct clksrc_clk *clksrcs[] __initdata = {
 	&clk_arm,
-	&clk_i2s_eplldiv,
-	&clk_i2s,
 	&clk_hsspi,
 	&clk_hsmmc_div,
 };

arch/arm/mach-s3c2443/s3c2443.c

@@ -90,8 +90,8 @@ void __init s3c2443_init_uarts(struct s3c2410_uartcfg *cfg, int no)
 
 void __init s3c2443_map_io(void)
 {
-	s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_s3c2443;
-	s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_s3c2443;
+	s3c24xx_gpiocfg_default.set_pull = s3c2443_gpio_setpull;
+	s3c24xx_gpiocfg_default.get_pull = s3c2443_gpio_getpull;
 
 	iotable_init(s3c2443_iodesc, ARRAY_SIZE(s3c2443_iodesc));
 }

arch/arm/mach-s3c64xx/Kconfig

@@ -288,5 +288,6 @@ config MACH_WLF_CRAGG_6410
 	select S3C_DEV_RTC
 	select S3C64XX_DEV_SPI
 	select S3C24XX_GPIO_EXTRA128
+	select I2C
 	help
 	  Machine support for the Wolfson Cragganmore S3C6410 variant.

arch/arm/mach-s3c64xx/Makefile

@@ -13,7 +13,6 @@ obj-				:=
 # Core files
 obj-y				+= cpu.o
 obj-y				+= clock.o
-obj-y				+= gpiolib.o
 
 # Core support for S3C6400 system
 
@@ -55,7 +54,7 @@ obj-$(CONFIG_MACH_HMT)		+= mach-hmt.o
 obj-$(CONFIG_MACH_SMARTQ)	+= mach-smartq.o
 obj-$(CONFIG_MACH_SMARTQ5)	+= mach-smartq5.o
 obj-$(CONFIG_MACH_SMARTQ7)	+= mach-smartq7.o
-obj-$(CONFIG_MACH_WLF_CRAGG_6410) += mach-crag6410.o
+obj-$(CONFIG_MACH_WLF_CRAGG_6410) += mach-crag6410.o mach-crag6410-module.o
 
 # device support
 

arch/arm/mach-s3c64xx/clock.c

@@ -744,7 +744,13 @@ void __init_or_cpufreq s3c6400_setup_clocks(void)
 	printk(KERN_INFO "S3C64XX: PLL settings, A=%ld, M=%ld, E=%ld\n",
 	       apll, mpll, epll);
 
-	hclk2 = mpll / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK2);
+	if(__raw_readl(S3C64XX_OTHERS) & S3C64XX_OTHERS_SYNCMUXSEL)
+		/* Synchronous mode */
+		hclk2 = apll / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK2);
+	else
+		/* Asynchronous mode */
+		hclk2 = mpll / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK2);
+
 	hclk = hclk2 / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK);
 	pclk = hclk2 / GET_DIV(clkdiv0, S3C6400_CLKDIV0_PCLK);
 

arch/arm/mach-s3c64xx/dma.c

@@ -147,14 +147,14 @@ static void s3c64xx_dma_fill_lli(struct s3c2410_dma_chan *chan,
 	u32 control0, control1;
 
 	switch (chan->source) {
-	case S3C2410_DMASRC_HW:
+	case DMA_FROM_DEVICE:
 		src = chan->dev_addr;
 		dst = data;
 		control0 = PL080_CONTROL_SRC_AHB2;
 		control0 |= PL080_CONTROL_DST_INCR;
 		break;
 
-	case S3C2410_DMASRC_MEM:
+	case DMA_TO_DEVICE:
 		src = data;
 		dst = chan->dev_addr;
 		control0 = PL080_CONTROL_DST_AHB2;
@@ -416,7 +416,7 @@ EXPORT_SYMBOL(s3c2410_dma_enqueue);
 
 
 int s3c2410_dma_devconfig(enum dma_ch channel,
-			  enum s3c2410_dmasrc source,
+			  enum dma_data_direction source,
 			  unsigned long devaddr)
 {
 	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
@@ -437,11 +437,11 @@ int s3c2410_dma_devconfig(enum dma_ch channel,
 	pr_debug("%s: peripheral %d\n", __func__, peripheral);
 
 	switch (source) {
-	case S3C2410_DMASRC_HW:
+	case DMA_FROM_DEVICE:
 		config = 2 << PL080_CONFIG_FLOW_CONTROL_SHIFT;
 		config |= peripheral << PL080_CONFIG_SRC_SEL_SHIFT;
 		break;
-	case S3C2410_DMASRC_MEM:
+	case DMA_TO_DEVICE:
 		config = 1 << PL080_CONFIG_FLOW_CONTROL_SHIFT;
 		config |= peripheral << PL080_CONFIG_DST_SEL_SHIFT;
 		break;
@@ -740,7 +740,7 @@ static int __init s3c64xx_dma_init(void)
 	}
 
 	/* Set all DMA configuration to be DMA, not SDMA */
-	writel(0xffffff, S3C_SYSREG(0x110));
+	writel(0xffffff, S3C64XX_SDMA_SEL);
 
 	/* Register standard DMA controllers */
 	s3c64xx_dma_init1(0, DMACH_UART0, IRQ_DMA0, 0x75000000);

arch/arm/mach-s3c64xx/gpiolib.c

@@ -1,290 +0,0 @@
-/* arch/arm/plat-s3c64xx/gpiolib.c
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * S3C64XX - GPIOlib support 
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-
-#include <mach/map.h>
-
-#include <plat/gpio-core.h>
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-cfg-helpers.h>
-#include <mach/regs-gpio.h>
-
-/* GPIO bank summary:
- *
- * Bank	GPIOs	Style	SlpCon	ExtInt Group
- * A	8	4Bit	Yes	1
- * B	7	4Bit	Yes	1
- * C	8	4Bit	Yes	2
- * D	5	4Bit	Yes	3
- * E	5	4Bit	Yes	None
- * F	16	2Bit	Yes	4 [1]
- * G	7	4Bit	Yes	5
- * H	10	4Bit[2]	Yes	6
- * I	16	2Bit	Yes	None
- * J	12	2Bit	Yes	None
- * K	16	4Bit[2]	No	None
- * L	15	4Bit[2] No	None
- * M	6	4Bit	No	IRQ_EINT
- * N	16	2Bit	No	IRQ_EINT
- * O	16	2Bit	Yes	7
- * P	15	2Bit	Yes	8
- * Q	9	2Bit	Yes	9
- *
- * [1] BANKF pins 14,15 do not form part of the external interrupt sources
- * [2] BANK has two control registers, GPxCON0 and GPxCON1
- */
-
-static struct s3c_gpio_cfg gpio_4bit_cfg_noint = {
-	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
-	.get_config	= s3c_gpio_getcfg_s3c64xx_4bit,
-	.set_pull	= s3c_gpio_setpull_updown,
-	.get_pull	= s3c_gpio_getpull_updown,
-};
-
-static struct s3c_gpio_cfg gpio_4bit_cfg_eint0111 = {
-	.cfg_eint	= 7,
-	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
-	.get_config	= s3c_gpio_getcfg_s3c64xx_4bit,
-	.set_pull	= s3c_gpio_setpull_updown,
-	.get_pull	= s3c_gpio_getpull_updown,
-};
-
-static struct s3c_gpio_cfg gpio_4bit_cfg_eint0011 = {
-	.cfg_eint	= 3,
-	.get_config	= s3c_gpio_getcfg_s3c64xx_4bit,
-	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
-	.set_pull	= s3c_gpio_setpull_updown,
-	.get_pull	= s3c_gpio_getpull_updown,
-};
-
-static int s3c64xx_gpio2int_gpm(struct gpio_chip *chip, unsigned pin)
-{
-	return pin < 5 ? IRQ_EINT(23) + pin : -ENXIO;
-}
-
-static struct s3c_gpio_chip gpio_4bit[] = {
-	{
-		.base	= S3C64XX_GPA_BASE,
-		.config	= &gpio_4bit_cfg_eint0111,
-		.chip	= {
-			.base	= S3C64XX_GPA(0),
-			.ngpio	= S3C64XX_GPIO_A_NR,
-			.label	= "GPA",
-		},
-	}, {
-		.base	= S3C64XX_GPB_BASE,
-		.config	= &gpio_4bit_cfg_eint0111,
-		.chip	= {
-			.base	= S3C64XX_GPB(0),
-			.ngpio	= S3C64XX_GPIO_B_NR,
-			.label	= "GPB",
-		},
-	}, {
-		.base	= S3C64XX_GPC_BASE,
-		.config	= &gpio_4bit_cfg_eint0111,
-		.chip	= {
-			.base	= S3C64XX_GPC(0),
-			.ngpio	= S3C64XX_GPIO_C_NR,
-			.label	= "GPC",
-		},
-	}, {
-		.base	= S3C64XX_GPD_BASE,
-		.config	= &gpio_4bit_cfg_eint0111,
-		.chip	= {
-			.base	= S3C64XX_GPD(0),
-			.ngpio	= S3C64XX_GPIO_D_NR,
-			.label	= "GPD",
-		},
-	}, {
-		.base	= S3C64XX_GPE_BASE,
-		.config	= &gpio_4bit_cfg_noint,
-		.chip	= {
-			.base	= S3C64XX_GPE(0),
-			.ngpio	= S3C64XX_GPIO_E_NR,
-			.label	= "GPE",
-		},
-	}, {
-		.base	= S3C64XX_GPG_BASE,
-		.config	= &gpio_4bit_cfg_eint0111,
-		.chip	= {
-			.base	= S3C64XX_GPG(0),
-			.ngpio	= S3C64XX_GPIO_G_NR,
-			.label	= "GPG",
-		},
-	}, {
-		.base	= S3C64XX_GPM_BASE,
-		.config	= &gpio_4bit_cfg_eint0011,
-		.chip	= {
-			.base	= S3C64XX_GPM(0),
-			.ngpio	= S3C64XX_GPIO_M_NR,
-			.label	= "GPM",
-			.to_irq = s3c64xx_gpio2int_gpm,
-		},
-	},
-};
-
-static int s3c64xx_gpio2int_gpl(struct gpio_chip *chip, unsigned pin)
-{
-	return pin >= 8 ? IRQ_EINT(16) + pin - 8 : -ENXIO;
-}
-
-static struct s3c_gpio_chip gpio_4bit2[] = {
-	{
-		.base	= S3C64XX_GPH_BASE + 0x4,
-		.config	= &gpio_4bit_cfg_eint0111,
-		.chip	= {
-			.base	= S3C64XX_GPH(0),
-			.ngpio	= S3C64XX_GPIO_H_NR,
-			.label	= "GPH",
-		},
-	}, {
-		.base	= S3C64XX_GPK_BASE + 0x4,
-		.config	= &gpio_4bit_cfg_noint,
-		.chip	= {
-			.base	= S3C64XX_GPK(0),
-			.ngpio	= S3C64XX_GPIO_K_NR,
-			.label	= "GPK",
-		},
-	}, {
-		.base	= S3C64XX_GPL_BASE + 0x4,
-		.config	= &gpio_4bit_cfg_eint0011,
-		.chip	= {
-			.base	= S3C64XX_GPL(0),
-			.ngpio	= S3C64XX_GPIO_L_NR,
-			.label	= "GPL",
-			.to_irq = s3c64xx_gpio2int_gpl,
-		},
-	},
-};
-
-static struct s3c_gpio_cfg gpio_2bit_cfg_noint = {
-	.set_config	= s3c_gpio_setcfg_s3c24xx,
-	.get_config	= s3c_gpio_getcfg_s3c24xx,
-	.set_pull	= s3c_gpio_setpull_updown,
-	.get_pull	= s3c_gpio_getpull_updown,
-};
-
-static struct s3c_gpio_cfg gpio_2bit_cfg_eint10 = {
-	.cfg_eint	= 2,
-	.set_config	= s3c_gpio_setcfg_s3c24xx,
-	.get_config	= s3c_gpio_getcfg_s3c24xx,
-	.set_pull	= s3c_gpio_setpull_updown,
-	.get_pull	= s3c_gpio_getpull_updown,
-};
-
-static struct s3c_gpio_cfg gpio_2bit_cfg_eint11 = {
-	.cfg_eint	= 3,
-	.set_config	= s3c_gpio_setcfg_s3c24xx,
-	.get_config	= s3c_gpio_getcfg_s3c24xx,
-	.set_pull	= s3c_gpio_setpull_updown,
-	.get_pull	= s3c_gpio_getpull_updown,
-};
-
-static struct s3c_gpio_chip gpio_2bit[] = {
-	{
-		.base	= S3C64XX_GPF_BASE,
-		.config	= &gpio_2bit_cfg_eint11,
-		.chip	= {
-			.base	= S3C64XX_GPF(0),
-			.ngpio	= S3C64XX_GPIO_F_NR,
-			.label	= "GPF",
-		},
-	}, {
-		.base	= S3C64XX_GPI_BASE,
-		.config	= &gpio_2bit_cfg_noint,
-		.chip	= {
-			.base	= S3C64XX_GPI(0),
-			.ngpio	= S3C64XX_GPIO_I_NR,
-			.label	= "GPI",
-		},
-	}, {
-		.base	= S3C64XX_GPJ_BASE,
-		.config	= &gpio_2bit_cfg_noint,
-		.chip	= {
-			.base	= S3C64XX_GPJ(0),
-			.ngpio	= S3C64XX_GPIO_J_NR,
-			.label	= "GPJ",
-		},
-	}, {
-		.base	= S3C64XX_GPN_BASE,
-		.irq_base = IRQ_EINT(0),
-		.config	= &gpio_2bit_cfg_eint10,
-		.chip	= {
-			.base	= S3C64XX_GPN(0),
-			.ngpio	= S3C64XX_GPIO_N_NR,
-			.label	= "GPN",
-			.to_irq = samsung_gpiolib_to_irq,
-		},
-	}, {
-		.base	= S3C64XX_GPO_BASE,
-		.config	= &gpio_2bit_cfg_eint11,
-		.chip	= {
-			.base	= S3C64XX_GPO(0),
-			.ngpio	= S3C64XX_GPIO_O_NR,
-			.label	= "GPO",
-		},
-	}, {
-		.base	= S3C64XX_GPP_BASE,
-		.config	= &gpio_2bit_cfg_eint11,
-		.chip	= {
-			.base	= S3C64XX_GPP(0),
-			.ngpio	= S3C64XX_GPIO_P_NR,
-			.label	= "GPP",
-		},
-	}, {
-		.base	= S3C64XX_GPQ_BASE,
-		.config	= &gpio_2bit_cfg_eint11,
-		.chip	= {
-			.base	= S3C64XX_GPQ(0),
-			.ngpio	= S3C64XX_GPIO_Q_NR,
-			.label	= "GPQ",
-		},
-	},
-};
-
-static __init void s3c64xx_gpiolib_add_2bit(struct s3c_gpio_chip *chip)
-{
-	chip->pm = __gpio_pm(&s3c_gpio_pm_2bit);
-}
-
-static __init void s3c64xx_gpiolib_add(struct s3c_gpio_chip *chips,
-				       int nr_chips,
-				       void (*fn)(struct s3c_gpio_chip *))
-{
-	for (; nr_chips > 0; nr_chips--, chips++) {
-		if (fn)
-			(fn)(chips);
-		s3c_gpiolib_add(chips);
-	}
-}
-
-static __init int s3c64xx_gpiolib_init(void)
-{
-	s3c64xx_gpiolib_add(gpio_4bit, ARRAY_SIZE(gpio_4bit),
-			    samsung_gpiolib_add_4bit);
-
-	s3c64xx_gpiolib_add(gpio_4bit2, ARRAY_SIZE(gpio_4bit2),
-			    samsung_gpiolib_add_4bit2);
-
-	s3c64xx_gpiolib_add(gpio_2bit, ARRAY_SIZE(gpio_2bit),
-			    s3c64xx_gpiolib_add_2bit);
-
-	return 0;
-}
-
-core_initcall(s3c64xx_gpiolib_init);

arch/arm/mach-s3c64xx/include/mach/crag6410.h

@@ -0,0 +1,23 @@
+/* Cragganmore 6410 shared definitions
+ *
+ * Copyright 2011 Wolfson Microelectronics plc
+ *	Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef MACH_CRAG6410_H
+#define MACH_CRAG6410_H
+
+#include <linux/gpio.h>
+
+#define BANFF_PMIC_IRQ_BASE		IRQ_BOARD_START
+#define GLENFARCLAS_PMIC_IRQ_BASE	(IRQ_BOARD_START + 64)
+
+#define PCA935X_GPIO_BASE		GPIO_BOARD_START
+#define CODEC_GPIO_BASE		(GPIO_BOARD_START + 8)
+#define GLENFARCLAS_PMIC_GPIO_BASE	(GPIO_BOARD_START + 16)
+
+#endif

arch/arm/mach-s3c64xx/include/mach/dma.h

@@ -58,11 +58,15 @@ enum dma_ch {
 	DMACH_MAX		/* the end */
 };
 
-static __inline__ bool s3c_dma_has_circular(void)
+static inline bool samsung_dma_has_circular(void)
 {
 	return true;
 }
 
+static inline bool samsung_dma_is_dmadev(void)
+{
+	return false;
+}
 #define S3C2410_DMAF_CIRCULAR		(1 << 0)
 
 #include <plat/dma.h>
@@ -95,7 +99,7 @@ struct s3c2410_dma_chan {
 	unsigned char		 peripheral;
 
 	unsigned int		 flags;
-	enum s3c2410_dmasrc	 source;
+	enum dma_data_direction	 source;
 
 
 	dma_addr_t		dev_addr;

arch/arm/mach-s3c64xx/include/mach/pm-core.h

@@ -104,7 +104,7 @@ static inline void s3c_pm_restored_gpios(void)
 	__raw_writel(0, S3C64XX_SLPEN);
 }
 
-static inline void s3c_pm_saved_gpios(void)
+static inline void samsung_pm_saved_gpios(void)
 {
 	/* turn on the sleep mode and keep it there, as it seems that during
 	 * suspend the xCON registers get re-set and thus you can end up with

arch/arm/mach-s3c64xx/include/mach/regs-sys.h

@@ -21,8 +21,11 @@
 #define S3C64XX_AHB_CON1	S3C_SYSREG(0x104)
 #define S3C64XX_AHB_CON2	S3C_SYSREG(0x108)
 
+#define S3C64XX_SDMA_SEL	S3C_SYSREG(0x110)
+
 #define S3C64XX_OTHERS		S3C_SYSREG(0x900)
 
 #define S3C64XX_OTHERS_USBMASK	(1 << 16)
+#define S3C64XX_OTHERS_SYNCMUXSEL	(1 << 6)
 
 #endif /* _PLAT_REGS_SYS_H */

arch/arm/mach-s3c64xx/mach-crag6410-module.c

@@ -0,0 +1,182 @@
+/* Speyside modules for Cragganmore - board data probing
+ *
+ * Copyright 2011 Wolfson Microelectronics plc
+ *	Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+
+#include <linux/mfd/wm831x/irq.h>
+#include <linux/mfd/wm831x/gpio.h>
+
+#include <sound/wm8996.h>
+#include <sound/wm8962.h>
+#include <sound/wm9081.h>
+
+#include <mach/crag6410.h>
+
+static struct wm8996_retune_mobile_config wm8996_retune[] = {
+	{
+		.name = "Sub LPF",
+		.rate = 48000,
+		.regs = {
+			0x6318, 0x6300, 0x1000, 0x0000, 0x0004, 0x2000, 0xF000,
+			0x0000, 0x0004, 0x2000, 0xF000, 0x0000, 0x0004, 0x2000,
+			0xF000, 0x0000, 0x0004, 0x1000, 0x0800, 0x4000
+		},
+	},
+	{
+		.name = "Sub HPF",
+		.rate = 48000,
+		.regs = {
+			0x000A, 0x6300, 0x1000, 0x0000, 0x0004, 0x2000, 0xF000,
+			0x0000, 0x0004, 0x2000, 0xF000, 0x0000, 0x0004, 0x2000,
+			0xF000, 0x0000, 0x0004, 0x1000, 0x0800, 0x4000
+		},
+	},
+};
+
+static struct wm8996_pdata wm8996_pdata __initdata = {
+	.ldo_ena = S3C64XX_GPN(7),
+	.gpio_base = CODEC_GPIO_BASE,
+	.micdet_def = 1,
+	.inl_mode = WM8996_DIFFERRENTIAL_1,
+	.inr_mode = WM8996_DIFFERRENTIAL_1,
+
+	.irq_flags = IRQF_TRIGGER_RISING,
+
+	.gpio_default = {
+		0x8001, /* GPIO1 == ADCLRCLK1 */
+		0x8001, /* GPIO2 == ADCLRCLK2, input due to CPU */
+		0x0141, /* GPIO3 == HP_SEL */
+		0x0002, /* GPIO4 == IRQ */
+		0x020e, /* GPIO5 == CLKOUT */
+	},
+
+	.retune_mobile_cfgs = wm8996_retune,
+	.num_retune_mobile_cfgs = ARRAY_SIZE(wm8996_retune),
+};
+
+static struct wm8962_pdata wm8962_pdata __initdata = {
+	.gpio_init = {
+		0,
+		WM8962_GPIO_FN_OPCLK,
+		WM8962_GPIO_FN_DMICCLK,
+		0,
+		0x8000 | WM8962_GPIO_FN_DMICDAT,
+		WM8962_GPIO_FN_IRQ,    /* Open drain mode */
+	},
+	.irq_active_low = true,
+};
+
+static struct wm9081_pdata wm9081_pdata __initdata = {
+	.irq_high = false,
+	.irq_cmos = false,
+};
+
+static const struct i2c_board_info wm1254_devs[] = {
+	{ I2C_BOARD_INFO("wm8996", 0x1a),
+	  .platform_data = &wm8996_pdata,
+	  .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2,
+	},
+	{ I2C_BOARD_INFO("wm9081", 0x6c),
+	  .platform_data = &wm9081_pdata, },
+};
+
+static const struct i2c_board_info wm1255_devs[] = {
+	{ I2C_BOARD_INFO("wm5100", 0x1a),
+	  .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2,
+	},
+	{ I2C_BOARD_INFO("wm9081", 0x6c),
+	  .platform_data = &wm9081_pdata, },
+};
+
+static const struct i2c_board_info wm1259_devs[] = {
+	{ I2C_BOARD_INFO("wm8962", 0x1a),
+	  .platform_data = &wm8962_pdata,
+	  .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2,
+	},
+};
+
+
+static __devinitdata const struct {
+	u8 id;
+	const char *name;
+	const struct i2c_board_info *i2c_devs;
+	int num_i2c_devs;
+} gf_mods[] = {
+	{ .id = 0x01, .name = "1250-EV1 Springbank" },
+	{ .id = 0x02, .name = "1251-EV1 Jura" },
+	{ .id = 0x03, .name = "1252-EV1 Glenlivet" },
+	{ .id = 0x11, .name = "6249-EV2 Glenfarclas", },
+	{ .id = 0x21, .name = "1275-EV1 Mortlach" },
+	{ .id = 0x25, .name = "1274-EV1 Glencadam" },
+	{ .id = 0x31, .name = "1253-EV1 Tomatin", },
+	{ .id = 0x39, .name = "1254-EV1 Dallas Dhu",
+	  .i2c_devs = wm1254_devs, .num_i2c_devs = ARRAY_SIZE(wm1254_devs) },
+	{ .id = 0x3a, .name = "1259-EV1 Tobermory",
+	  .i2c_devs = wm1259_devs, .num_i2c_devs = ARRAY_SIZE(wm1259_devs) },
+	{ .id = 0x3b, .name = "1255-EV1 Kilchoman",
+	  .i2c_devs = wm1255_devs, .num_i2c_devs = ARRAY_SIZE(wm1255_devs) },
+	{ .id = 0x3c, .name = "1273-EV1 Longmorn" },
+};
+
+static __devinit int wlf_gf_module_probe(struct i2c_client *i2c,
+					 const struct i2c_device_id *i2c_id)
+{
+	int ret, i, j, id, rev;
+
+	ret = i2c_smbus_read_byte_data(i2c, 0);
+	if (ret < 0) {
+		dev_err(&i2c->dev, "Failed to read ID: %d\n", ret);
+		return ret;
+	}
+
+	id = (ret & 0xfe) >> 2;
+	rev = ret & 0x3;
+	for (i = 0; i < ARRAY_SIZE(gf_mods); i++)
+		if (id == gf_mods[i].id)
+			break;
+
+	if (i < ARRAY_SIZE(gf_mods)) {
+		dev_info(&i2c->dev, "%s revision %d\n",
+			 gf_mods[i].name, rev + 1);
+		for (j = 0; j < gf_mods[i].num_i2c_devs; j++) {
+			if (!i2c_new_device(i2c->adapter,
+					    &(gf_mods[i].i2c_devs[j])))
+				dev_err(&i2c->dev,
+					"Failed to register dev: %d\n", ret);
+		}
+	} else {
+		dev_warn(&i2c->dev, "Unknown module ID %d revision %d\n",
+			 id, rev);
+	}
+
+	return 0;
+}
+
+static const struct i2c_device_id wlf_gf_module_id[] = {
+	{ "wlf-gf-module", 0 },
+	{ }
+};
+
+static struct i2c_driver wlf_gf_module_driver = {
+	.driver = {
+		.name = "wlf-gf-module",
+		.owner = THIS_MODULE,
+	},
+	.probe = wlf_gf_module_probe,
+	.id_table = wlf_gf_module_id,
+};
+
+static int __init wlf_gf_module_register(void)
+{
+	return i2c_add_driver(&wlf_gf_module_driver);
+}
+module_init(wlf_gf_module_register);

arch/arm/mach-s3c64xx/mach-crag6410.c

@@ -47,6 +47,7 @@
 #include <mach/regs-sys.h>
 #include <mach/regs-gpio.h>
 #include <mach/regs-modem.h>
+#include <mach/crag6410.h>
 
 #include <mach/regs-gpio-memport.h>
 
@@ -65,17 +66,6 @@
 #include <plat/iic.h>
 #include <plat/pm.h>
 
-#include <sound/wm8996.h>
-#include <sound/wm8962.h>
-#include <sound/wm9081.h>
-
-#define BANFF_PMIC_IRQ_BASE		IRQ_BOARD_START
-#define GLENFARCLAS_PMIC_IRQ_BASE	(IRQ_BOARD_START + 64)
-
-#define PCA935X_GPIO_BASE		GPIO_BOARD_START
-#define CODEC_GPIO_BASE		(GPIO_BOARD_START + 8)
-#define GLENFARCLAS_PMIC_GPIO_BASE	(GPIO_BOARD_START + 16)
-
 /* serial port setup */
 
 #define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK)
@@ -287,6 +277,11 @@ static struct platform_device speyside_device = {
 	.id		= -1,
 };
 
+static struct platform_device lowland_device = {
+	.name		= "lowland",
+	.id		= -1,
+};
+
 static struct platform_device speyside_wm8962_device = {
 	.name		= "speyside-wm8962",
 	.id		= -1,
@@ -295,6 +290,8 @@ static struct platform_device speyside_wm8962_device = {
 static struct regulator_consumer_supply wallvdd_consumers[] = {
 	REGULATOR_SUPPLY("SPKVDD1", "1-001a"),
 	REGULATOR_SUPPLY("SPKVDD2", "1-001a"),
+	REGULATOR_SUPPLY("SPKVDDL", "1-001a"),
+	REGULATOR_SUPPLY("SPKVDDR", "1-001a"),
 };
 
 static struct regulator_init_data wallvdd_data = {
@@ -342,6 +339,7 @@ static struct platform_device *crag6410_devices[] __initdata = {
 	&crag6410_backlight_device,
 	&speyside_device,
 	&speyside_wm8962_device,
+	&lowland_device,
 	&wallvdd_device,
 };
 
@@ -350,6 +348,12 @@ static struct pca953x_platform_data crag6410_pca_data = {
 	.irq_base	= 0,
 };
 
+/* VDDARM is controlled by DVS1 connected to GPK(0) */
+static struct wm831x_buckv_pdata vddarm_pdata = {
+	.dvs_control_src = 1,
+	.dvs_gpio = S3C64XX_GPK(0),
+};
+
 static struct regulator_consumer_supply vddarm_consumers[] __initdata = {
 	REGULATOR_SUPPLY("vddarm", NULL),
 };
@@ -365,6 +369,7 @@ static struct regulator_init_data vddarm __initdata = {
 	.num_consumer_supplies = ARRAY_SIZE(vddarm_consumers),
 	.consumer_supplies = vddarm_consumers,
 	.supply_regulator = "WALLVDD",
+	.driver_data = &vddarm_pdata,
 };
 
 static struct regulator_init_data vddint __initdata = {
@@ -500,6 +505,8 @@ static struct wm831x_pdata crag_pmic_pdata __initdata = {
 	.backup = &banff_backup_pdata,
 
 	.gpio_defaults = {
+		/* GPIO5: DVS1_REQ - CMOS, DBVDD, active high */
+		[4] = WM831X_GPN_DIR | WM831X_GPN_POL | WM831X_GPN_ENA | 0x8,
 		/* GPIO11: Touchscreen data - CMOS, DBVDD, active high*/
 		[10] = WM831X_GPN_POL | WM831X_GPN_ENA | 0x6,
 		/* GPIO12: Touchscreen pen down - CMOS, DBVDD, active high*/
@@ -557,8 +564,12 @@ static struct regulator_init_data pvdd_1v2 __initdata = {
 };
 
 static struct regulator_consumer_supply pvdd_1v8_consumers[] __initdata = {
+	REGULATOR_SUPPLY("LDOVDD", "1-001a"),
 	REGULATOR_SUPPLY("PLLVDD", "1-001a"),
 	REGULATOR_SUPPLY("DBVDD", "1-001a"),
+	REGULATOR_SUPPLY("DBVDD1", "1-001a"),
+	REGULATOR_SUPPLY("DBVDD2", "1-001a"),
+	REGULATOR_SUPPLY("DBVDD3", "1-001a"),
 	REGULATOR_SUPPLY("CPVDD", "1-001a"),
 	REGULATOR_SUPPLY("AVDD2", "1-001a"),
 	REGULATOR_SUPPLY("DCVDD", "1-001a"),
@@ -611,81 +622,16 @@ static struct wm831x_pdata glenfarclas_pmic_pdata __initdata = {
 	.disable_touch = true,
 };
 
-static struct wm8996_retune_mobile_config wm8996_retune[] = {
-	{
-		.name = "Sub LPF",
-		.rate = 48000,
-		.regs = {
-			0x6318, 0x6300, 0x1000, 0x0000, 0x0004, 0x2000, 0xF000,
-			0x0000, 0x0004, 0x2000, 0xF000, 0x0000, 0x0004, 0x2000,
-			0xF000, 0x0000, 0x0004, 0x1000, 0x0800, 0x4000
-		},
-	},
-	{
-		.name = "Sub HPF",
-		.rate = 48000,
-		.regs = {
-			0x000A, 0x6300, 0x1000, 0x0000, 0x0004, 0x2000, 0xF000,
-			0x0000, 0x0004, 0x2000, 0xF000, 0x0000, 0x0004, 0x2000,
-			0xF000, 0x0000, 0x0004, 0x1000, 0x0800, 0x4000
-		},
-	},
-};
-
-static struct wm8996_pdata wm8996_pdata __initdata = {
-	.ldo_ena = S3C64XX_GPN(7),
-	.gpio_base = CODEC_GPIO_BASE,
-	.micdet_def = 1,
-	.inl_mode = WM8996_DIFFERRENTIAL_1,
-	.inr_mode = WM8996_DIFFERRENTIAL_1,
-
-	.irq_flags = IRQF_TRIGGER_RISING,
-
-	.gpio_default = {
-		0x8001, /* GPIO1 == ADCLRCLK1 */
-		0x8001, /* GPIO2 == ADCLRCLK2, input due to CPU */
-		0x0141, /* GPIO3 == HP_SEL */
-		0x0002, /* GPIO4 == IRQ */
-		0x020e, /* GPIO5 == CLKOUT */
-	},
-
-	.retune_mobile_cfgs = wm8996_retune,
-	.num_retune_mobile_cfgs = ARRAY_SIZE(wm8996_retune),
-};
-
-static struct wm8962_pdata wm8962_pdata __initdata = {
-	.gpio_init = {
-		0,
-		WM8962_GPIO_FN_OPCLK,
-		WM8962_GPIO_FN_DMICCLK,
-		0,
-		0x8000 | WM8962_GPIO_FN_DMICDAT,
-		WM8962_GPIO_FN_IRQ,    /* Open drain mode */
-	},
-	.irq_active_low = true,
-};
-
-static struct wm9081_pdata wm9081_pdata __initdata = {
-	.irq_high = false,
-	.irq_cmos = false,
-};
-
 static struct i2c_board_info i2c_devs1[] __initdata = {
 	{ I2C_BOARD_INFO("wm8311", 0x34),
 	  .irq = S3C_EINT(0),
 	  .platform_data = &glenfarclas_pmic_pdata },
 
+	{ I2C_BOARD_INFO("wlf-gf-module", 0x24) },
+	{ I2C_BOARD_INFO("wlf-gf-module", 0x25) },
+	{ I2C_BOARD_INFO("wlf-gf-module", 0x26) },
+
 	{ I2C_BOARD_INFO("wm1250-ev1", 0x27) },
-	{ I2C_BOARD_INFO("wm8996", 0x1a),
-	  .platform_data = &wm8996_pdata,
-	  .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2,
-	},
-	{ I2C_BOARD_INFO("wm9081", 0x6c),
-	  .platform_data = &wm9081_pdata, },
-	{ I2C_BOARD_INFO("wm8962", 0x1a),
-	  .platform_data = &wm8962_pdata,
-	  .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2,
-	},
 };
 
 static void __init crag6410_map_io(void)

arch/arm/mach-s3c64xx/pm.c

@@ -29,6 +29,7 @@
 #include <mach/regs-clock.h>
 #include <mach/regs-syscon-power.h>
 #include <mach/regs-gpio-memport.h>
+#include <mach/regs-modem.h>
 
 #ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK
 void s3c_pm_debug_smdkled(u32 set, u32 clear)
@@ -85,6 +86,9 @@ static struct sleep_save misc_save[] = {
 	SAVE_ITEM(S3C64XX_MEM0CONSLP0),
 	SAVE_ITEM(S3C64XX_MEM0CONSLP1),
 	SAVE_ITEM(S3C64XX_MEM1CONSLP),
+
+	SAVE_ITEM(S3C64XX_SDMA_SEL),
+	SAVE_ITEM(S3C64XX_MODEM_MIFPCON),
 };
 
 void s3c_pm_configure_extint(void)

arch/arm/mach-s5p64x0/Kconfig

@@ -9,18 +9,24 @@ if ARCH_S5P64X0
 
 config CPU_S5P6440
 	bool
-	select S3C_PL330_DMA
+	select SAMSUNG_DMADEV
 	select S5P_HRT
 	help
 	  Enable S5P6440 CPU support
 
 config CPU_S5P6450
 	bool
-	select S3C_PL330_DMA
+	select SAMSUNG_DMADEV
 	select S5P_HRT
 	help
 	  Enable S5P6450 CPU support
 
+config S5P64X0_SETUP_FB_24BPP
+	bool
+	help
+	  Common setup code for S5P64X0 based boards with a LCD display
+	  through RGB interface.
+
 config S5P64X0_SETUP_I2C1
 	bool
 	help
@@ -31,6 +37,7 @@ config S5P64X0_SETUP_I2C1
 config MACH_SMDK6440
 	bool "SMDK6440"
 	select CPU_S5P6440
+	select S3C_DEV_FB
 	select S3C_DEV_I2C1
 	select S3C_DEV_RTC
 	select S3C_DEV_WDT
@@ -39,6 +46,7 @@ config MACH_SMDK6440
 	select SAMSUNG_DEV_BACKLIGHT
 	select SAMSUNG_DEV_PWM
 	select SAMSUNG_DEV_TS
+	select S5P64X0_SETUP_FB_24BPP
 	select S5P64X0_SETUP_I2C1
 	help
 	  Machine support for the Samsung SMDK6440
@@ -46,6 +54,7 @@ config MACH_SMDK6440
 config MACH_SMDK6450
 	bool "SMDK6450"
 	select CPU_S5P6450
+	select S3C_DEV_FB
 	select S3C_DEV_I2C1
 	select S3C_DEV_RTC
 	select S3C_DEV_WDT
@@ -54,6 +63,7 @@ config MACH_SMDK6450
 	select SAMSUNG_DEV_BACKLIGHT
 	select SAMSUNG_DEV_PWM
 	select SAMSUNG_DEV_TS
+	select S5P64X0_SETUP_FB_24BPP
 	select S5P64X0_SETUP_I2C1
 	help
 	  Machine support for the Samsung SMDK6450

arch/arm/mach-s5p64x0/Makefile

@@ -12,7 +12,7 @@ obj-				:=
 
 # Core support for S5P64X0 system
 
-obj-$(CONFIG_ARCH_S5P64X0)	+= cpu.o init.o clock.o dma.o gpiolib.o
+obj-$(CONFIG_ARCH_S5P64X0)	+= cpu.o init.o clock.o dma.o
 obj-$(CONFIG_ARCH_S5P64X0)	+= setup-i2c0.o irq-eint.o
 obj-$(CONFIG_CPU_S5P6440)	+= clock-s5p6440.o
 obj-$(CONFIG_CPU_S5P6450)	+= clock-s5p6450.o
@@ -28,3 +28,4 @@ obj-y				+= dev-audio.o
 obj-$(CONFIG_S3C64XX_DEV_SPI)	+= dev-spi.o
 
 obj-$(CONFIG_S5P64X0_SETUP_I2C1)	+= setup-i2c1.o
+obj-$(CONFIG_S5P64X0_SETUP_FB_24BPP)	+= setup-fb-24bpp.o

arch/arm/mach-s5p64x0/clock-s5p6440.c

@@ -146,7 +146,8 @@ static struct clk init_clocks_off[] = {
 		.enable		= s5p64x0_hclk0_ctrl,
 		.ctrlbit	= (1 << 8),
 	}, {
-		.name		= "pdma",
+		.name		= "dma",
+		.devname	= "dma-pl330",
 		.parent		= &clk_hclk_low.clk,
 		.enable		= s5p64x0_hclk0_ctrl,
 		.ctrlbit	= (1 << 12),
@@ -499,6 +500,11 @@ static struct clksrc_clk *sysclks[] = {
 	&clk_pclk_low,
 };
 
+static struct clk dummy_apb_pclk = {
+	.name		= "apb_pclk",
+	.id		= -1,
+};
+
 void __init_or_cpufreq s5p6440_setup_clocks(void)
 {
 	struct clk *xtal_clk;
@@ -581,5 +587,7 @@ void __init s5p6440_register_clocks(void)
 	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
 	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
 
+	s3c24xx_register_clock(&dummy_apb_pclk);
+
 	s3c_pwmclk_init();
 }

arch/arm/mach-s5p64x0/clock-s5p6450.c

@@ -179,7 +179,8 @@ static struct clk init_clocks_off[] = {
 		.enable		= s5p64x0_hclk0_ctrl,
 		.ctrlbit	= (1 << 3),
 	}, {
-		.name		= "pdma",
+		.name		= "dma",
+		.devname	= "dma-pl330",
 		.parent		= &clk_hclk_low.clk,
 		.enable		= s5p64x0_hclk0_ctrl,
 		.ctrlbit	= (1 << 12),
@@ -553,6 +554,11 @@ static struct clksrc_clk *sysclks[] = {
 	&clk_sclk_audio0,
 };
 
+static struct clk dummy_apb_pclk = {
+	.name		= "apb_pclk",
+	.id		= -1,
+};
+
 void __init_or_cpufreq s5p6450_setup_clocks(void)
 {
 	struct clk *xtal_clk;
@@ -632,5 +638,7 @@ void __init s5p6450_register_clocks(void)
 	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
 	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
 
+	s3c24xx_register_clock(&dummy_apb_pclk);
+
 	s3c_pwmclk_init();
 }

arch/arm/mach-s5p64x0/cpu.c

@@ -38,6 +38,7 @@
 #include <plat/s5p6440.h>
 #include <plat/s5p6450.h>
 #include <plat/adc-core.h>
+#include <plat/fb-core.h>
 
 /* Initial IO mappings */
 
@@ -108,6 +109,7 @@ void __init s5p6440_map_io(void)
 {
 	/* initialize any device information early */
 	s3c_adc_setname("s3c64xx-adc");
+	s3c_fb_setname("s5p64x0-fb");
 
 	iotable_init(s5p64x0_iodesc, ARRAY_SIZE(s5p64x0_iodesc));
 	iotable_init(s5p6440_iodesc, ARRAY_SIZE(s5p6440_iodesc));
@@ -117,6 +119,7 @@ void __init s5p6450_map_io(void)
 {
 	/* initialize any device information early */
 	s3c_adc_setname("s3c64xx-adc");
+	s3c_fb_setname("s5p64x0-fb");
 
 	iotable_init(s5p64x0_iodesc, ARRAY_SIZE(s5p64x0_iodesc));
 	iotable_init(s5p6450_iodesc, ARRAY_SIZE(s5p6450_iodesc));

arch/arm/mach-s5p64x0/dma.c

@@ -21,115 +21,208 @@
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 */
 
-#include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/pl330.h>
+
+#include <asm/irq.h>
 
 #include <mach/map.h>
 #include <mach/irqs.h>
 #include <mach/regs-clock.h>
+#include <mach/dma.h>
 
 #include <plat/cpu.h>
 #include <plat/devs.h>
-#include <plat/s3c-pl330-pdata.h>
+#include <plat/irqs.h>
 
 static u64 dma_dmamask = DMA_BIT_MASK(32);
 
-static struct resource s5p64x0_pdma_resource[] = {
-	[0] = {
-		.start	= S5P64X0_PA_PDMA,
-		.end	= S5P64X0_PA_PDMA + SZ_4K,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_DMA0,
-		.end	= IRQ_DMA0,
-		.flags	= IORESOURCE_IRQ,
+struct dma_pl330_peri s5p6440_pdma_peri[22] = {
+	{
+		.peri_id = (u8)DMACH_UART0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_UART1_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART1_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_UART2_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART2_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_UART3_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART3_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = DMACH_MAX,
+	}, {
+		.peri_id = DMACH_MAX,
+	}, {
+		.peri_id = (u8)DMACH_PCM0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_PCM0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_I2S0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_I2S0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_SPI0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_SPI0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_MAX,
+	}, {
+		.peri_id = (u8)DMACH_MAX,
+	}, {
+		.peri_id = (u8)DMACH_MAX,
+	}, {
+		.peri_id = (u8)DMACH_MAX,
+	}, {
+		.peri_id = (u8)DMACH_SPI1_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_SPI1_RX,
+		.rqtype = DEVTOMEM,
 	},
 };
 
-static struct s3c_pl330_platdata s5p6440_pdma_pdata = {
-	.peri = {
-		[0] = DMACH_UART0_RX,
-		[1] = DMACH_UART0_TX,
-		[2] = DMACH_UART1_RX,
-		[3] = DMACH_UART1_TX,
-		[4] = DMACH_UART2_RX,
-		[5] = DMACH_UART2_TX,
-		[6] = DMACH_UART3_RX,
-		[7] = DMACH_UART3_TX,
-		[8] = DMACH_MAX,
-		[9] = DMACH_MAX,
-		[10] = DMACH_PCM0_TX,
-		[11] = DMACH_PCM0_RX,
-		[12] = DMACH_I2S0_TX,
-		[13] = DMACH_I2S0_RX,
-		[14] = DMACH_SPI0_TX,
-		[15] = DMACH_SPI0_RX,
-		[16] = DMACH_MAX,
-		[17] = DMACH_MAX,
-		[18] = DMACH_MAX,
-		[19] = DMACH_MAX,
-		[20] = DMACH_SPI1_TX,
-		[21] = DMACH_SPI1_RX,
-		[22] = DMACH_MAX,
-		[23] = DMACH_MAX,
-		[24] = DMACH_MAX,
-		[25] = DMACH_MAX,
-		[26] = DMACH_MAX,
-		[27] = DMACH_MAX,
-		[28] = DMACH_MAX,
-		[29] = DMACH_PWM,
-		[30] = DMACH_MAX,
-		[31] = DMACH_MAX,
-	},
+struct dma_pl330_platdata s5p6440_pdma_pdata = {
+	.nr_valid_peri = ARRAY_SIZE(s5p6440_pdma_peri),
+	.peri = s5p6440_pdma_peri,
 };
 
-static struct s3c_pl330_platdata s5p6450_pdma_pdata = {
-	.peri = {
-		[0] = DMACH_UART0_RX,
-		[1] = DMACH_UART0_TX,
-		[2] = DMACH_UART1_RX,
-		[3] = DMACH_UART1_TX,
-		[4] = DMACH_UART2_RX,
-		[5] = DMACH_UART2_TX,
-		[6] = DMACH_UART3_RX,
-		[7] = DMACH_UART3_TX,
-		[8] = DMACH_UART4_RX,
-		[9] = DMACH_UART4_TX,
-		[10] = DMACH_PCM0_TX,
-		[11] = DMACH_PCM0_RX,
-		[12] = DMACH_I2S0_TX,
-		[13] = DMACH_I2S0_RX,
-		[14] = DMACH_SPI0_TX,
-		[15] = DMACH_SPI0_RX,
-		[16] = DMACH_PCM1_TX,
-		[17] = DMACH_PCM1_RX,
-		[18] = DMACH_PCM2_TX,
-		[19] = DMACH_PCM2_RX,
-		[20] = DMACH_SPI1_TX,
-		[21] = DMACH_SPI1_RX,
-		[22] = DMACH_USI_TX,
-		[23] = DMACH_USI_RX,
-		[24] = DMACH_MAX,
-		[25] = DMACH_I2S1_TX,
-		[26] = DMACH_I2S1_RX,
-		[27] = DMACH_I2S2_TX,
-		[28] = DMACH_I2S2_RX,
-		[29] = DMACH_PWM,
-		[30] = DMACH_UART5_RX,
-		[31] = DMACH_UART5_TX,
+struct dma_pl330_peri s5p6450_pdma_peri[32] = {
+	{
+		.peri_id = (u8)DMACH_UART0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_UART1_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART1_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_UART2_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART2_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_UART3_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART3_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_UART4_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART4_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_PCM0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_PCM0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_I2S0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_I2S0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_SPI0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_SPI0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_PCM1_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_PCM1_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_PCM2_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_PCM2_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_SPI1_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_SPI1_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_USI_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_USI_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_MAX,
+	}, {
+		.peri_id = (u8)DMACH_I2S1_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_I2S1_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_I2S2_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_I2S2_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_PWM,
+	}, {
+		.peri_id = (u8)DMACH_UART5_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART5_TX,
+		.rqtype = MEMTODEV,
 	},
 };
 
-static struct platform_device s5p64x0_device_pdma = {
-	.name		= "s3c-pl330",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s5p64x0_pdma_resource),
-	.resource	= s5p64x0_pdma_resource,
-	.dev		= {
+struct dma_pl330_platdata s5p6450_pdma_pdata = {
+	.nr_valid_peri = ARRAY_SIZE(s5p6450_pdma_peri),
+	.peri = s5p6450_pdma_peri,
+};
+
+struct amba_device s5p64x0_device_pdma = {
+	.dev = {
+		.init_name = "dma-pl330",
 		.dma_mask = &dma_dmamask,
 		.coherent_dma_mask = DMA_BIT_MASK(32),
 	},
+	.res = {
+		.start = S5P64X0_PA_PDMA,
+		.end = S5P64X0_PA_PDMA + SZ_4K,
+		.flags = IORESOURCE_MEM,
+	},
+	.irq = {IRQ_DMA0, NO_IRQ},
+	.periphid = 0x00041330,
 };
 
 static int __init s5p64x0_dma_init(void)
@@ -139,7 +232,7 @@ static int __init s5p64x0_dma_init(void)
 	else
 		s5p64x0_device_pdma.dev.platform_data = &s5p6440_pdma_pdata;
 
-	platform_device_register(&s5p64x0_device_pdma);
+	amba_device_register(&s5p64x0_device_pdma, &iomem_resource);
 
 	return 0;
 }

arch/arm/mach-s5p64x0/include/mach/dma.h

@@ -20,7 +20,7 @@
 #ifndef __MACH_DMA_H
 #define __MACH_DMA_H
 
-/* This platform uses the common S3C DMA API driver for PL330 */
-#include <plat/s3c-dma-pl330.h>
+/* This platform uses the common common DMA API driver for PL330 */
+#include <plat/dma-pl330.h>
 
 #endif /* __MACH_DMA_H */

arch/arm/mach-s5p64x0/include/mach/irqs.h

@@ -87,6 +87,10 @@
 
 #define IRQ_I2S0		IRQ_I2SV40
 
+#define IRQ_LCD_FIFO		IRQ_DISPCON0
+#define IRQ_LCD_VSYNC		IRQ_DISPCON1
+#define IRQ_LCD_SYSTEM		IRQ_DISPCON2
+
 /* S5P6450 EINT feature will be added */
 
 /*

arch/arm/mach-s5p64x0/include/mach/map.h

@@ -47,6 +47,8 @@
 
 #define S5P64X0_PA_HSMMC(x)	(0xED800000 + ((x) * 0x100000))
 
+#define S5P64X0_PA_FB		0xEE000000
+
 #define S5P64X0_PA_I2S		0xF2000000
 #define S5P6450_PA_I2S1		0xF2800000
 #define S5P6450_PA_I2S2		0xF2900000
@@ -64,6 +66,7 @@
 #define S3C_PA_IIC1		S5P6440_PA_IIC1
 #define S3C_PA_RTC		S5P64X0_PA_RTC
 #define S3C_PA_WDT		S5P64X0_PA_WDT
+#define S3C_PA_FB		S5P64X0_PA_FB
 
 #define S5P_PA_CHIPID		S5P64X0_PA_CHIPID
 #define S5P_PA_SROMC		S5P64X0_PA_SROMC

arch/arm/mach-s5p64x0/include/mach/regs-gpio.h

@@ -34,6 +34,10 @@
 #define S5P6450_GPQ_BASE		(S5P_VA_GPIO + 0x0180)
 #define S5P6450_GPS_BASE		(S5P_VA_GPIO + 0x0300)
 
+#define S5P64X0_SPCON0			(S5P_VA_GPIO + 0x1A0)
+#define S5P64X0_SPCON0_LCD_SEL_MASK	(0x3 << 0)
+#define S5P64X0_SPCON0_LCD_SEL_RGB	(0x1 << 0)
+
 /* External interrupt control registers for group0 */
 
 #define EINT0CON0_OFFSET		(0x900)

arch/arm/mach-s5p64x0/mach-smdk6440.c

@@ -23,6 +23,9 @@
 #include <linux/clk.h>
 #include <linux/gpio.h>
 #include <linux/pwm_backlight.h>
+#include <linux/fb.h>
+
+#include <video/platform_lcd.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -47,6 +50,8 @@
 #include <plat/ts.h>
 #include <plat/s5p-time.h>
 #include <plat/backlight.h>
+#include <plat/fb.h>
+#include <plat/regs-fb.h>
 
 #define SMDK6440_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
 				S3C2410_UCON_RXILEVEL |		\
@@ -92,6 +97,59 @@ static struct s3c2410_uartcfg smdk6440_uartcfgs[] __initdata = {
 	},
 };
 
+/* Frame Buffer */
+static struct s3c_fb_pd_win smdk6440_fb_win0 = {
+	.win_mode = {
+		.left_margin	= 8,
+		.right_margin	= 13,
+		.upper_margin	= 7,
+		.lower_margin	= 5,
+		.hsync_len	= 3,
+		.vsync_len	= 1,
+		.xres		= 800,
+		.yres		= 480,
+	},
+	.max_bpp	= 32,
+	.default_bpp	= 24,
+};
+
+static struct s3c_fb_platdata smdk6440_lcd_pdata __initdata = {
+	.win[0]		= &smdk6440_fb_win0,
+	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+	.setup_gpio	= s5p64x0_fb_gpio_setup_24bpp,
+};
+
+/* LCD power controller */
+static void smdk6440_lte480_reset_power(struct plat_lcd_data *pd,
+					 unsigned int power)
+{
+	int err;
+
+	if (power) {
+		err = gpio_request(S5P6440_GPN(5), "GPN");
+		if (err) {
+			printk(KERN_ERR "failed to request GPN for lcd reset\n");
+			return;
+		}
+
+		gpio_direction_output(S5P6440_GPN(5), 1);
+		gpio_set_value(S5P6440_GPN(5), 0);
+		gpio_set_value(S5P6440_GPN(5), 1);
+		gpio_free(S5P6440_GPN(5));
+	}
+}
+
+static struct plat_lcd_data smdk6440_lcd_power_data = {
+	.set_power	= smdk6440_lte480_reset_power,
+};
+
+static struct platform_device smdk6440_lcd_lte480wv = {
+	.name			= "platform-lcd",
+	.dev.parent		= &s3c_device_fb.dev,
+	.dev.platform_data	= &smdk6440_lcd_power_data,
+};
+
 static struct platform_device *smdk6440_devices[] __initdata = {
 	&s3c_device_adc,
 	&s3c_device_rtc,
@@ -101,6 +159,8 @@ static struct platform_device *smdk6440_devices[] __initdata = {
 	&s3c_device_wdt,
 	&samsung_asoc_dma,
 	&s5p6440_device_iis,
+	&s3c_device_fb,
+	&smdk6440_lcd_lte480wv,
 };
 
 static struct s3c2410_platform_i2c s5p6440_i2c0_data __initdata = {
@@ -147,6 +207,17 @@ static void __init smdk6440_map_io(void)
 	s5p_set_timer_source(S5P_PWM3, S5P_PWM4);
 }
 
+static void s5p6440_set_lcd_interface(void)
+{
+	unsigned int cfg;
+
+	/* select TFT LCD type (RGB I/F) */
+	cfg = __raw_readl(S5P64X0_SPCON0);
+	cfg &= ~S5P64X0_SPCON0_LCD_SEL_MASK;
+	cfg |= S5P64X0_SPCON0_LCD_SEL_RGB;
+	__raw_writel(cfg, S5P64X0_SPCON0);
+}
+
 static void __init smdk6440_machine_init(void)
 {
 	s3c24xx_ts_set_platdata(NULL);
@@ -160,6 +231,9 @@ static void __init smdk6440_machine_init(void)
 
 	samsung_bl_set(&smdk6440_bl_gpio_info, &smdk6440_bl_data);
 
+	s5p6440_set_lcd_interface();
+	s3c_fb_set_platdata(&smdk6440_lcd_pdata);
+
 	platform_add_devices(smdk6440_devices, ARRAY_SIZE(smdk6440_devices));
 }
 

arch/arm/mach-s5p64x0/mach-smdk6450.c

@@ -23,6 +23,9 @@
 #include <linux/clk.h>
 #include <linux/gpio.h>
 #include <linux/pwm_backlight.h>
+#include <linux/fb.h>
+
+#include <video/platform_lcd.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -47,6 +50,8 @@
 #include <plat/ts.h>
 #include <plat/s5p-time.h>
 #include <plat/backlight.h>
+#include <plat/fb.h>
+#include <plat/regs-fb.h>
 
 #define SMDK6450_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
 				S3C2410_UCON_RXILEVEL |		\
@@ -110,6 +115,59 @@ static struct s3c2410_uartcfg smdk6450_uartcfgs[] __initdata = {
 #endif
 };
 
+/* Frame Buffer */
+static struct s3c_fb_pd_win smdk6450_fb_win0 = {
+	.win_mode	= {
+		.left_margin	= 8,
+		.right_margin	= 13,
+		.upper_margin	= 7,
+		.lower_margin	= 5,
+		.hsync_len	= 3,
+		.vsync_len	= 1,
+		.xres		= 800,
+		.yres		= 480,
+	},
+	.max_bpp	= 32,
+	.default_bpp	= 24,
+};
+
+static struct s3c_fb_platdata smdk6450_lcd_pdata __initdata = {
+	.win[0]		= &smdk6450_fb_win0,
+	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+	.setup_gpio	= s5p64x0_fb_gpio_setup_24bpp,
+};
+
+/* LCD power controller */
+static void smdk6450_lte480_reset_power(struct plat_lcd_data *pd,
+					 unsigned int power)
+{
+	int err;
+
+	if (power) {
+		err = gpio_request(S5P6450_GPN(5), "GPN");
+		if (err) {
+			printk(KERN_ERR "failed to request GPN for lcd reset\n");
+			return;
+		}
+
+		gpio_direction_output(S5P6450_GPN(5), 1);
+		gpio_set_value(S5P6450_GPN(5), 0);
+		gpio_set_value(S5P6450_GPN(5), 1);
+		gpio_free(S5P6450_GPN(5));
+	}
+}
+
+static struct plat_lcd_data smdk6450_lcd_power_data = {
+	.set_power	= smdk6450_lte480_reset_power,
+};
+
+static struct platform_device smdk6450_lcd_lte480wv = {
+	.name			= "platform-lcd",
+	.dev.parent		= &s3c_device_fb.dev,
+	.dev.platform_data	= &smdk6450_lcd_power_data,
+};
+
 static struct platform_device *smdk6450_devices[] __initdata = {
 	&s3c_device_adc,
 	&s3c_device_rtc,
@@ -119,6 +177,9 @@ static struct platform_device *smdk6450_devices[] __initdata = {
 	&s3c_device_wdt,
 	&samsung_asoc_dma,
 	&s5p6450_device_iis0,
+	&s3c_device_fb,
+	&smdk6450_lcd_lte480wv,
+
 	/* s5p6450_device_spi0 will be added */
 };
 
@@ -166,6 +227,17 @@ static void __init smdk6450_map_io(void)
 	s5p_set_timer_source(S5P_PWM3, S5P_PWM4);
 }
 
+static void s5p6450_set_lcd_interface(void)
+{
+	unsigned int cfg;
+
+	/* select TFT LCD type (RGB I/F) */
+	cfg = __raw_readl(S5P64X0_SPCON0);
+	cfg &= ~S5P64X0_SPCON0_LCD_SEL_MASK;
+	cfg |= S5P64X0_SPCON0_LCD_SEL_RGB;
+	__raw_writel(cfg, S5P64X0_SPCON0);
+}
+
 static void __init smdk6450_machine_init(void)
 {
 	s3c24xx_ts_set_platdata(NULL);
@@ -179,6 +251,9 @@ static void __init smdk6450_machine_init(void)
 
 	samsung_bl_set(&smdk6450_bl_gpio_info, &smdk6450_bl_data);
 
+	s5p6450_set_lcd_interface();
+	s3c_fb_set_platdata(&smdk6450_lcd_pdata);
+
 	platform_add_devices(smdk6450_devices, ARRAY_SIZE(smdk6450_devices));
 }
 

arch/arm/mach-s5p64x0/setup-fb-24bpp.c

@@ -0,0 +1,29 @@
+/* linux/arch/arm/mach-s5p64x0/setup-fb-24bpp.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *             http://www.samsung.com/
+ *
+ * Base S5P64X0 GPIO setup information for LCD framebuffer
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/fb.h>
+#include <linux/gpio.h>
+
+#include <plat/cpu.h>
+#include <plat/fb.h>
+#include <plat/gpio-cfg.h>
+
+void s5p64x0_fb_gpio_setup_24bpp(void)
+{
+	if (soc_is_s5p6440()) {
+		s3c_gpio_cfgrange_nopull(S5P6440_GPI(0), 16, S3C_GPIO_SFN(2));
+		s3c_gpio_cfgrange_nopull(S5P6440_GPJ(0), 12, S3C_GPIO_SFN(2));
+	} else if (soc_is_s5p6450()) {
+		s3c_gpio_cfgrange_nopull(S5P6450_GPI(0), 16, S3C_GPIO_SFN(2));
+		s3c_gpio_cfgrange_nopull(S5P6450_GPJ(0), 12, S3C_GPIO_SFN(2));
+	}
+}

arch/arm/mach-s5pc100/Kconfig

@@ -10,7 +10,7 @@ if ARCH_S5PC100
 config CPU_S5PC100
 	bool
 	select S5P_EXT_INT
-	select S3C_PL330_DMA
+	select SAMSUNG_DMADEV
 	help
 	  Enable S5PC100 CPU support
 

arch/arm/mach-s5pc100/clock.c

@@ -33,6 +33,11 @@ static struct clk s5p_clk_otgphy = {
 	.name		= "otg_phy",
 };
 
+static struct clk dummy_apb_pclk = {
+	.name		= "apb_pclk",
+	.id		= -1,
+};
+
 static struct clk *clk_src_mout_href_list[] = {
 	[0] = &s5p_clk_27m,
 	[1] = &clk_fin_hpll,
@@ -454,14 +459,14 @@ static struct clk init_clocks_off[] = {
 		.enable		= s5pc100_d1_0_ctrl,
 		.ctrlbit	= (1 << 2),
 	}, {
-		.name		= "pdma",
-		.devname	= "s3c-pl330.1",
+		.name		= "dma",
+		.devname	= "dma-pl330.1",
 		.parent		= &clk_div_d1_bus.clk,
 		.enable		= s5pc100_d1_0_ctrl,
 		.ctrlbit	= (1 << 1),
 	}, {
-		.name		= "pdma",
-		.devname	= "s3c-pl330.0",
+		.name		= "dma",
+		.devname	= "dma-pl330.0",
 		.parent		= &clk_div_d1_bus.clk,
 		.enable		= s5pc100_d1_0_ctrl,
 		.ctrlbit	= (1 << 0),
@@ -1276,5 +1281,7 @@ void __init s5pc100_register_clocks(void)
 	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
 	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
 
+	s3c24xx_register_clock(&dummy_apb_pclk);
+
 	s3c_pwmclk_init();
 }

arch/arm/mach-s5pc100/dma.c

@@ -1,4 +1,8 @@
-/*
+/* linux/arch/arm/mach-s5pc100/dma.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
  * Copyright (C) 2010 Samsung Electronics Co. Ltd.
  *	Jaswinder Singh <jassi.brar@samsung.com>
  *
@@ -17,150 +21,246 @@
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
-#include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/pl330.h>
 
+#include <asm/irq.h>
 #include <plat/devs.h>
+#include <plat/irqs.h>
 
 #include <mach/map.h>
 #include <mach/irqs.h>
-
-#include <plat/s3c-pl330-pdata.h>
+#include <mach/dma.h>
 
 static u64 dma_dmamask = DMA_BIT_MASK(32);
 
-static struct resource s5pc100_pdma0_resource[] = {
-	[0] = {
-		.start  = S5PC100_PA_PDMA0,
-		.end    = S5PC100_PA_PDMA0 + SZ_4K,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_PDMA0,
-		.end	= IRQ_PDMA0,
-		.flags	= IORESOURCE_IRQ,
+struct dma_pl330_peri pdma0_peri[30] = {
+	{
+		.peri_id = (u8)DMACH_UART0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_UART1_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART1_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_UART2_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART2_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_UART3_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART3_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = DMACH_IRDA,
+	}, {
+		.peri_id = (u8)DMACH_I2S0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_I2S0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_I2S0S_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_I2S1_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_I2S1_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_I2S2_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_I2S2_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_SPI0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_SPI0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_SPI1_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_SPI1_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_SPI2_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_SPI2_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_AC97_MICIN,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_AC97_PCMIN,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_AC97_PCMOUT,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_EXTERNAL,
+	}, {
+		.peri_id = (u8)DMACH_PWM,
+	}, {
+		.peri_id = (u8)DMACH_SPDIF,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_HSI_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_HSI_TX,
+		.rqtype = MEMTODEV,
 	},
 };
 
-static struct s3c_pl330_platdata s5pc100_pdma0_pdata = {
-	.peri = {
-		[0] = DMACH_UART0_RX,
-		[1] = DMACH_UART0_TX,
-		[2] = DMACH_UART1_RX,
-		[3] = DMACH_UART1_TX,
-		[4] = DMACH_UART2_RX,
-		[5] = DMACH_UART2_TX,
-		[6] = DMACH_UART3_RX,
-		[7] = DMACH_UART3_TX,
-		[8] = DMACH_IRDA,
-		[9] = DMACH_I2S0_RX,
-		[10] = DMACH_I2S0_TX,
-		[11] = DMACH_I2S0S_TX,
-		[12] = DMACH_I2S1_RX,
-		[13] = DMACH_I2S1_TX,
-		[14] = DMACH_I2S2_RX,
-		[15] = DMACH_I2S2_TX,
-		[16] = DMACH_SPI0_RX,
-		[17] = DMACH_SPI0_TX,
-		[18] = DMACH_SPI1_RX,
-		[19] = DMACH_SPI1_TX,
-		[20] = DMACH_SPI2_RX,
-		[21] = DMACH_SPI2_TX,
-		[22] = DMACH_AC97_MICIN,
-		[23] = DMACH_AC97_PCMIN,
-		[24] = DMACH_AC97_PCMOUT,
-		[25] = DMACH_EXTERNAL,
-		[26] = DMACH_PWM,
-		[27] = DMACH_SPDIF,
-		[28] = DMACH_HSI_RX,
-		[29] = DMACH_HSI_TX,
-		[30] = DMACH_MAX,
-		[31] = DMACH_MAX,
-	},
+struct dma_pl330_platdata s5pc100_pdma0_pdata = {
+	.nr_valid_peri = ARRAY_SIZE(pdma0_peri),
+	.peri = pdma0_peri,
 };
 
-static struct platform_device s5pc100_device_pdma0 = {
-	.name		= "s3c-pl330",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(s5pc100_pdma0_resource),
-	.resource	= s5pc100_pdma0_resource,
-	.dev		= {
+struct amba_device s5pc100_device_pdma0 = {
+	.dev = {
+		.init_name = "dma-pl330.0",
 		.dma_mask = &dma_dmamask,
 		.coherent_dma_mask = DMA_BIT_MASK(32),
 		.platform_data = &s5pc100_pdma0_pdata,
 	},
-};
-
-static struct resource s5pc100_pdma1_resource[] = {
-	[0] = {
-		.start  = S5PC100_PA_PDMA1,
-		.end    = S5PC100_PA_PDMA1 + SZ_4K,
+	.res = {
+		.start = S5PC100_PA_PDMA0,
+		.end = S5PC100_PA_PDMA0 + SZ_4K,
 		.flags = IORESOURCE_MEM,
 	},
-	[1] = {
-		.start	= IRQ_PDMA1,
-		.end	= IRQ_PDMA1,
-		.flags	= IORESOURCE_IRQ,
-	},
+	.irq = {IRQ_PDMA0, NO_IRQ},
+	.periphid = 0x00041330,
 };
 
-static struct s3c_pl330_platdata s5pc100_pdma1_pdata = {
-	.peri = {
-		[0] = DMACH_UART0_RX,
-		[1] = DMACH_UART0_TX,
-		[2] = DMACH_UART1_RX,
-		[3] = DMACH_UART1_TX,
-		[4] = DMACH_UART2_RX,
-		[5] = DMACH_UART2_TX,
-		[6] = DMACH_UART3_RX,
-		[7] = DMACH_UART3_TX,
-		[8] = DMACH_IRDA,
-		[9] = DMACH_I2S0_RX,
-		[10] = DMACH_I2S0_TX,
-		[11] = DMACH_I2S0S_TX,
-		[12] = DMACH_I2S1_RX,
-		[13] = DMACH_I2S1_TX,
-		[14] = DMACH_I2S2_RX,
-		[15] = DMACH_I2S2_TX,
-		[16] = DMACH_SPI0_RX,
-		[17] = DMACH_SPI0_TX,
-		[18] = DMACH_SPI1_RX,
-		[19] = DMACH_SPI1_TX,
-		[20] = DMACH_SPI2_RX,
-		[21] = DMACH_SPI2_TX,
-		[22] = DMACH_PCM0_RX,
-		[23] = DMACH_PCM0_TX,
-		[24] = DMACH_PCM1_RX,
-		[25] = DMACH_PCM1_TX,
-		[26] = DMACH_MSM_REQ0,
-		[27] = DMACH_MSM_REQ1,
-		[28] = DMACH_MSM_REQ2,
-		[29] = DMACH_MSM_REQ3,
-		[30] = DMACH_MAX,
-		[31] = DMACH_MAX,
+struct dma_pl330_peri pdma1_peri[30] = {
+	{
+		.peri_id = (u8)DMACH_UART0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_UART1_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART1_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_UART2_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART2_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_UART3_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART3_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = DMACH_IRDA,
+	}, {
+		.peri_id = (u8)DMACH_I2S0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_I2S0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_I2S0S_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_I2S1_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_I2S1_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_I2S2_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_I2S2_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_SPI0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_SPI0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_SPI1_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_SPI1_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_SPI2_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_SPI2_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_PCM0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_PCM1_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_PCM1_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_PCM1_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_MSM_REQ0,
+	}, {
+		.peri_id = (u8)DMACH_MSM_REQ1,
+	}, {
+		.peri_id = (u8)DMACH_MSM_REQ2,
+	}, {
+		.peri_id = (u8)DMACH_MSM_REQ3,
 	},
 };
 
-static struct platform_device s5pc100_device_pdma1 = {
-	.name		= "s3c-pl330",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(s5pc100_pdma1_resource),
-	.resource	= s5pc100_pdma1_resource,
-	.dev		= {
+struct dma_pl330_platdata s5pc100_pdma1_pdata = {
+	.nr_valid_peri = ARRAY_SIZE(pdma1_peri),
+	.peri = pdma1_peri,
+};
+
+struct amba_device s5pc100_device_pdma1 = {
+	.dev = {
+		.init_name = "dma-pl330.1",
 		.dma_mask = &dma_dmamask,
 		.coherent_dma_mask = DMA_BIT_MASK(32),
 		.platform_data = &s5pc100_pdma1_pdata,
 	},
-};
-
-static struct platform_device *s5pc100_dmacs[] __initdata = {
-	&s5pc100_device_pdma0,
-	&s5pc100_device_pdma1,
+	.res = {
+		.start = S5PC100_PA_PDMA1,
+		.end = S5PC100_PA_PDMA1 + SZ_4K,
+		.flags = IORESOURCE_MEM,
+	},
+	.irq = {IRQ_PDMA1, NO_IRQ},
+	.periphid = 0x00041330,
 };
 
 static int __init s5pc100_dma_init(void)
 {
-	platform_add_devices(s5pc100_dmacs, ARRAY_SIZE(s5pc100_dmacs));
+	amba_device_register(&s5pc100_device_pdma0, &iomem_resource);
+	amba_device_register(&s5pc100_device_pdma1, &iomem_resource);
 
 	return 0;
 }

arch/arm/mach-s5pc100/include/mach/dma.h

@@ -20,7 +20,7 @@
 #ifndef __MACH_DMA_H
 #define __MACH_DMA_H
 
-/* This platform uses the common S3C DMA API driver for PL330 */
-#include <plat/s3c-dma-pl330.h>
+/* This platform uses the common DMA API driver for PL330 */
+#include <plat/dma-pl330.h>
 
 #endif /* __MACH_DMA_H */

arch/arm/mach-s5pv210/Kconfig

@@ -11,7 +11,7 @@ if ARCH_S5PV210
 
 config CPU_S5PV210
 	bool
-	select S3C_PL330_DMA
+	select SAMSUNG_DMADEV
 	select S5P_EXT_INT
 	select S5P_HRT
 	help
@@ -93,11 +93,13 @@ config MACH_GONI
 	select S3C_DEV_USB_HSOTG
 	select S5P_DEV_ONENAND
 	select SAMSUNG_DEV_KEYPAD
+	select S5P_DEV_TV
 	select S5PV210_SETUP_FB_24BPP
 	select S5PV210_SETUP_I2C1
 	select S5PV210_SETUP_I2C2
 	select S5PV210_SETUP_KEYPAD
 	select S5PV210_SETUP_SDHCI
+	select S5PV210_SETUP_FIMC
 	help
 	  Machine support for Samsung GONI board
 	  S5PC110(MCP) is one of package option of S5PV210

arch/arm/mach-s5pv210/clock.c

@@ -174,6 +174,16 @@ static int s5pv210_clk_mask1_ctrl(struct clk *clk, int enable)
 	return s5p_gatectrl(S5P_CLK_SRC_MASK1, clk, enable);
 }
 
+static int exynos4_clk_hdmiphy_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P_HDMI_PHY_CONTROL, clk, enable);
+}
+
+static int exynos4_clk_dac_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P_DAC_PHY_CONTROL, clk, enable);
+}
+
 static struct clk clk_sclk_hdmi27m = {
 	.name		= "sclk_hdmi27m",
 	.rate		= 27000000,
@@ -203,6 +213,11 @@ static struct clk clk_pcmcdclk2 = {
 	.name		= "pcmcdclk",
 };
 
+static struct clk dummy_apb_pclk = {
+	.name		= "apb_pclk",
+	.id		= -1,
+};
+
 static struct clk *clkset_vpllsrc_list[] = {
 	[0] = &clk_fin_vpll,
 	[1] = &clk_sclk_hdmi27m,
@@ -289,14 +304,14 @@ static struct clk_ops clk_fout_apll_ops = {
 
 static struct clk init_clocks_off[] = {
 	{
-		.name		= "pdma",
-		.devname	= "s3c-pl330.0",
+		.name		= "dma",
+		.devname	= "dma-pl330.0",
 		.parent		= &clk_hclk_psys.clk,
 		.enable		= s5pv210_clk_ip0_ctrl,
 		.ctrlbit	= (1 << 3),
 	}, {
-		.name		= "pdma",
-		.devname	= "s3c-pl330.1",
+		.name		= "dma",
+		.devname	= "dma-pl330.1",
 		.parent		= &clk_hclk_psys.clk,
 		.enable		= s5pv210_clk_ip0_ctrl,
 		.ctrlbit	= (1 << 4),
@@ -329,6 +344,40 @@ static struct clk init_clocks_off[] = {
 		.parent		= &clk_pclk_psys.clk,
 		.enable		= s5pv210_clk_ip0_ctrl,
 		.ctrlbit	= (1 << 16),
+	}, {
+		.name		= "dac",
+		.devname	= "s5p-sdo",
+		.parent		= &clk_hclk_dsys.clk,
+		.enable		= s5pv210_clk_ip1_ctrl,
+		.ctrlbit	= (1 << 10),
+	}, {
+		.name		= "mixer",
+		.devname	= "s5p-mixer",
+		.parent		= &clk_hclk_dsys.clk,
+		.enable		= s5pv210_clk_ip1_ctrl,
+		.ctrlbit	= (1 << 9),
+	}, {
+		.name		= "vp",
+		.devname	= "s5p-mixer",
+		.parent		= &clk_hclk_dsys.clk,
+		.enable		= s5pv210_clk_ip1_ctrl,
+		.ctrlbit	= (1 << 8),
+	}, {
+		.name		= "hdmi",
+		.devname	= "s5pv210-hdmi",
+		.parent		= &clk_hclk_dsys.clk,
+		.enable		= s5pv210_clk_ip1_ctrl,
+		.ctrlbit	= (1 << 11),
+	}, {
+		.name		= "hdmiphy",
+		.devname	= "s5pv210-hdmi",
+		.enable		= exynos4_clk_hdmiphy_ctrl,
+		.ctrlbit	= (1 << 0),
+	}, {
+		.name		= "dacphy",
+		.devname	= "s5p-sdo",
+		.enable		= exynos4_clk_dac_ctrl,
+		.ctrlbit	= (1 << 0),
 	}, {
 		.name		= "otg",
 		.parent		= &clk_hclk_psys.clk,
@@ -406,6 +455,12 @@ static struct clk init_clocks_off[] = {
 		.parent		= &clk_pclk_psys.clk,
 		.enable		= s5pv210_clk_ip3_ctrl,
 		.ctrlbit	= (1<<9),
+	}, {
+		.name		= "i2c",
+		.devname	= "s3c2440-hdmiphy-i2c",
+		.parent		= &clk_pclk_psys.clk,
+		.enable		= s5pv210_clk_ip3_ctrl,
+		.ctrlbit	= (1 << 11),
 	}, {
 		.name		= "spi",
 		.devname	= "s3c64xx-spi.0",
@@ -594,6 +649,23 @@ static struct clksrc_sources clkset_sclk_mixer = {
 	.nr_sources	= ARRAY_SIZE(clkset_sclk_mixer_list),
 };
 
+static struct clksrc_clk clk_sclk_mixer = {
+	.clk		= {
+		.name		= "sclk_mixer",
+		.enable		= s5pv210_clk_mask0_ctrl,
+		.ctrlbit	= (1 << 1),
+	},
+	.sources = &clkset_sclk_mixer,
+	.reg_src = { .reg = S5P_CLK_SRC1, .shift = 4, .size = 1 },
+};
+
+static struct clksrc_clk *sclk_tv[] = {
+	&clk_sclk_dac,
+	&clk_sclk_pixel,
+	&clk_sclk_hdmi,
+	&clk_sclk_mixer,
+};
+
 static struct clk *clkset_sclk_audio0_list[] = {
 	[0] = &clk_ext_xtal_mux,
 	[1] = &clk_pcmcdclk0,
@@ -775,14 +847,6 @@ static struct clksrc_clk clksrcs[] = {
 		.sources = &clkset_uart,
 		.reg_src = { .reg = S5P_CLK_SRC4, .shift = 28, .size = 4 },
 		.reg_div = { .reg = S5P_CLK_DIV4, .shift = 28, .size = 4 },
-	}, {
-		.clk	= {
-			.name		= "sclk_mixer",
-			.enable		= s5pv210_clk_mask0_ctrl,
-			.ctrlbit	= (1 << 1),
-		},
-		.sources = &clkset_sclk_mixer,
-		.reg_src = { .reg = S5P_CLK_SRC1, .shift = 4, .size = 1 },
 	}, {
 		.clk	= {
 			.name		= "sclk_fimc",
@@ -973,9 +1037,6 @@ static struct clksrc_clk *sysclks[] = {
 	&clk_pclk_psys,
 	&clk_vpllsrc,
 	&clk_sclk_vpll,
-	&clk_sclk_dac,
-	&clk_sclk_pixel,
-	&clk_sclk_hdmi,
 	&clk_mout_dmc0,
 	&clk_sclk_dmc0,
 	&clk_sclk_audio0,
@@ -1060,6 +1121,61 @@ static struct clk_ops s5pv210_epll_ops = {
 	.get_rate = s5p_epll_get_rate,
 };
 
+static u32 vpll_div[][5] = {
+	{  54000000, 3, 53, 3, 0 },
+	{ 108000000, 3, 53, 2, 0 },
+};
+
+static unsigned long s5pv210_vpll_get_rate(struct clk *clk)
+{
+	return clk->rate;
+}
+
+static int s5pv210_vpll_set_rate(struct clk *clk, unsigned long rate)
+{
+	unsigned int vpll_con;
+	unsigned int i;
+
+	/* Return if nothing changed */
+	if (clk->rate == rate)
+		return 0;
+
+	vpll_con = __raw_readl(S5P_VPLL_CON);
+	vpll_con &= ~(0x1 << 27 |					\
+			PLL90XX_MDIV_MASK << PLL90XX_MDIV_SHIFT |	\
+			PLL90XX_PDIV_MASK << PLL90XX_PDIV_SHIFT |	\
+			PLL90XX_SDIV_MASK << PLL90XX_SDIV_SHIFT);
+
+	for (i = 0; i < ARRAY_SIZE(vpll_div); i++) {
+		if (vpll_div[i][0] == rate) {
+			vpll_con |= vpll_div[i][1] << PLL90XX_PDIV_SHIFT;
+			vpll_con |= vpll_div[i][2] << PLL90XX_MDIV_SHIFT;
+			vpll_con |= vpll_div[i][3] << PLL90XX_SDIV_SHIFT;
+			vpll_con |= vpll_div[i][4] << 27;
+			break;
+		}
+	}
+
+	if (i == ARRAY_SIZE(vpll_div)) {
+		printk(KERN_ERR "%s: Invalid Clock VPLL Frequency\n",
+				__func__);
+		return -EINVAL;
+	}
+
+	__raw_writel(vpll_con, S5P_VPLL_CON);
+
+	/* Wait for VPLL lock */
+	while (!(__raw_readl(S5P_VPLL_CON) & (1 << PLL90XX_LOCKED_SHIFT)))
+		continue;
+
+	clk->rate = rate;
+	return 0;
+}
+static struct clk_ops s5pv210_vpll_ops = {
+	.get_rate = s5pv210_vpll_get_rate,
+	.set_rate = s5pv210_vpll_set_rate,
+};
+
 void __init_or_cpufreq s5pv210_setup_clocks(void)
 {
 	struct clk *xtal_clk;
@@ -1108,6 +1224,7 @@ void __init_or_cpufreq s5pv210_setup_clocks(void)
 	clk_fout_apll.ops = &clk_fout_apll_ops;
 	clk_fout_mpll.rate = mpll;
 	clk_fout_epll.rate = epll;
+	clk_fout_vpll.ops = &s5pv210_vpll_ops;
 	clk_fout_vpll.rate = vpll;
 
 	printk(KERN_INFO "S5PV210: PLL settings, A=%ld, M=%ld, E=%ld V=%ld",
@@ -1153,11 +1270,15 @@ void __init s5pv210_register_clocks(void)
 	for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++)
 		s3c_register_clksrc(sysclks[ptr], 1);
 
+	for (ptr = 0; ptr < ARRAY_SIZE(sclk_tv); ptr++)
+		s3c_register_clksrc(sclk_tv[ptr], 1);
+
 	s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
 	s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
 
 	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
 	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
 
+	s3c24xx_register_clock(&dummy_apb_pclk);
 	s3c_pwmclk_init();
 }

arch/arm/mach-s5pv210/cpu.c

@@ -41,6 +41,7 @@
 #include <plat/keypad-core.h>
 #include <plat/sdhci.h>
 #include <plat/reset.h>
+#include <plat/tv-core.h>
 
 /* Initial IO mappings */
 
@@ -143,6 +144,9 @@ void __init s5pv210_map_io(void)
 
 	/* Use s5pv210-keypad instead of samsung-keypad */
 	samsung_keypad_setname("s5pv210-keypad");
+
+	/* setup TV devices */
+	s5p_hdmi_setname("s5pv210-hdmi");
 }
 
 void __init s5pv210_init_clocks(int xtal)

arch/arm/mach-s5pv210/dma.c

@@ -1,4 +1,8 @@
-/*
+/* linux/arch/arm/mach-s5pv210/dma.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
  * Copyright (C) 2010 Samsung Electronics Co. Ltd.
  *	Jaswinder Singh <jassi.brar@samsung.com>
  *
@@ -17,151 +21,240 @@
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
-#include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/pl330.h>
 
+#include <asm/irq.h>
 #include <plat/devs.h>
 #include <plat/irqs.h>
 
 #include <mach/map.h>
 #include <mach/irqs.h>
-
-#include <plat/s3c-pl330-pdata.h>
+#include <mach/dma.h>
 
 static u64 dma_dmamask = DMA_BIT_MASK(32);
 
-static struct resource s5pv210_pdma0_resource[] = {
-	[0] = {
-		.start  = S5PV210_PA_PDMA0,
-		.end    = S5PV210_PA_PDMA0 + SZ_4K,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_PDMA0,
-		.end	= IRQ_PDMA0,
-		.flags	= IORESOURCE_IRQ,
+struct dma_pl330_peri pdma0_peri[28] = {
+	{
+		.peri_id = (u8)DMACH_UART0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_UART1_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART1_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_UART2_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART2_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_UART3_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART3_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = DMACH_MAX,
+	}, {
+		.peri_id = (u8)DMACH_I2S0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_I2S0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_I2S0S_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_I2S1_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_I2S1_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_MAX,
+	}, {
+		.peri_id = (u8)DMACH_MAX,
+	}, {
+		.peri_id = (u8)DMACH_SPI0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_SPI0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_SPI1_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_SPI1_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_MAX,
+	}, {
+		.peri_id = (u8)DMACH_MAX,
+	}, {
+		.peri_id = (u8)DMACH_AC97_MICIN,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_AC97_PCMIN,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_AC97_PCMOUT,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_MAX,
+	}, {
+		.peri_id = (u8)DMACH_PWM,
+	}, {
+		.peri_id = (u8)DMACH_SPDIF,
+		.rqtype = MEMTODEV,
 	},
 };
 
-static struct s3c_pl330_platdata s5pv210_pdma0_pdata = {
-	.peri = {
-		[0] = DMACH_UART0_RX,
-		[1] = DMACH_UART0_TX,
-		[2] = DMACH_UART1_RX,
-		[3] = DMACH_UART1_TX,
-		[4] = DMACH_UART2_RX,
-		[5] = DMACH_UART2_TX,
-		[6] = DMACH_UART3_RX,
-		[7] = DMACH_UART3_TX,
-		[8] = DMACH_MAX,
-		[9] = DMACH_I2S0_RX,
-		[10] = DMACH_I2S0_TX,
-		[11] = DMACH_I2S0S_TX,
-		[12] = DMACH_I2S1_RX,
-		[13] = DMACH_I2S1_TX,
-		[14] = DMACH_MAX,
-		[15] = DMACH_MAX,
-		[16] = DMACH_SPI0_RX,
-		[17] = DMACH_SPI0_TX,
-		[18] = DMACH_SPI1_RX,
-		[19] = DMACH_SPI1_TX,
-		[20] = DMACH_MAX,
-		[21] = DMACH_MAX,
-		[22] = DMACH_AC97_MICIN,
-		[23] = DMACH_AC97_PCMIN,
-		[24] = DMACH_AC97_PCMOUT,
-		[25] = DMACH_MAX,
-		[26] = DMACH_PWM,
-		[27] = DMACH_SPDIF,
-		[28] = DMACH_MAX,
-		[29] = DMACH_MAX,
-		[30] = DMACH_MAX,
-		[31] = DMACH_MAX,
-	},
+struct dma_pl330_platdata s5pv210_pdma0_pdata = {
+	.nr_valid_peri = ARRAY_SIZE(pdma0_peri),
+	.peri = pdma0_peri,
 };
 
-static struct platform_device s5pv210_device_pdma0 = {
-	.name		= "s3c-pl330",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(s5pv210_pdma0_resource),
-	.resource	= s5pv210_pdma0_resource,
-	.dev		= {
+struct amba_device s5pv210_device_pdma0 = {
+	.dev = {
+		.init_name = "dma-pl330.0",
 		.dma_mask = &dma_dmamask,
 		.coherent_dma_mask = DMA_BIT_MASK(32),
 		.platform_data = &s5pv210_pdma0_pdata,
 	},
-};
-
-static struct resource s5pv210_pdma1_resource[] = {
-	[0] = {
-		.start  = S5PV210_PA_PDMA1,
-		.end    = S5PV210_PA_PDMA1 + SZ_4K,
+	.res = {
+		.start = S5PV210_PA_PDMA0,
+		.end = S5PV210_PA_PDMA0 + SZ_4K,
 		.flags = IORESOURCE_MEM,
 	},
-	[1] = {
-		.start	= IRQ_PDMA1,
-		.end	= IRQ_PDMA1,
-		.flags	= IORESOURCE_IRQ,
-	},
+	.irq = {IRQ_PDMA0, NO_IRQ},
+	.periphid = 0x00041330,
 };
 
-static struct s3c_pl330_platdata s5pv210_pdma1_pdata = {
-	.peri = {
-		[0] = DMACH_UART0_RX,
-		[1] = DMACH_UART0_TX,
-		[2] = DMACH_UART1_RX,
-		[3] = DMACH_UART1_TX,
-		[4] = DMACH_UART2_RX,
-		[5] = DMACH_UART2_TX,
-		[6] = DMACH_UART3_RX,
-		[7] = DMACH_UART3_TX,
-		[8] = DMACH_MAX,
-		[9] = DMACH_I2S0_RX,
-		[10] = DMACH_I2S0_TX,
-		[11] = DMACH_I2S0S_TX,
-		[12] = DMACH_I2S1_RX,
-		[13] = DMACH_I2S1_TX,
-		[14] = DMACH_I2S2_RX,
-		[15] = DMACH_I2S2_TX,
-		[16] = DMACH_SPI0_RX,
-		[17] = DMACH_SPI0_TX,
-		[18] = DMACH_SPI1_RX,
-		[19] = DMACH_SPI1_TX,
-		[20] = DMACH_MAX,
-		[21] = DMACH_MAX,
-		[22] = DMACH_PCM0_RX,
-		[23] = DMACH_PCM0_TX,
-		[24] = DMACH_PCM1_RX,
-		[25] = DMACH_PCM1_TX,
-		[26] = DMACH_MSM_REQ0,
-		[27] = DMACH_MSM_REQ1,
-		[28] = DMACH_MSM_REQ2,
-		[29] = DMACH_MSM_REQ3,
-		[30] = DMACH_PCM2_RX,
-		[31] = DMACH_PCM2_TX,
+struct dma_pl330_peri pdma1_peri[32] = {
+	{
+		.peri_id = (u8)DMACH_UART0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_UART1_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART1_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_UART2_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART2_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_UART3_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_UART3_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = DMACH_MAX,
+	}, {
+		.peri_id = (u8)DMACH_I2S0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_I2S0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_I2S0S_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_I2S1_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_I2S1_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_I2S2_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_I2S2_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_SPI0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_SPI0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_SPI1_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_SPI1_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_MAX,
+	}, {
+		.peri_id = (u8)DMACH_MAX,
+	}, {
+		.peri_id = (u8)DMACH_PCM0_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_PCM0_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_PCM1_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_PCM1_TX,
+		.rqtype = MEMTODEV,
+	}, {
+		.peri_id = (u8)DMACH_MSM_REQ0,
+	}, {
+		.peri_id = (u8)DMACH_MSM_REQ1,
+	}, {
+		.peri_id = (u8)DMACH_MSM_REQ2,
+	}, {
+		.peri_id = (u8)DMACH_MSM_REQ3,
+	}, {
+		.peri_id = (u8)DMACH_PCM2_RX,
+		.rqtype = DEVTOMEM,
+	}, {
+		.peri_id = (u8)DMACH_PCM2_TX,
+		.rqtype = MEMTODEV,
 	},
 };
 
-static struct platform_device s5pv210_device_pdma1 = {
-	.name		= "s3c-pl330",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(s5pv210_pdma1_resource),
-	.resource	= s5pv210_pdma1_resource,
-	.dev		= {
+struct dma_pl330_platdata s5pv210_pdma1_pdata = {
+	.nr_valid_peri = ARRAY_SIZE(pdma1_peri),
+	.peri = pdma1_peri,
+};
+
+struct amba_device s5pv210_device_pdma1 = {
+	.dev = {
+		.init_name = "dma-pl330.1",
 		.dma_mask = &dma_dmamask,
 		.coherent_dma_mask = DMA_BIT_MASK(32),
 		.platform_data = &s5pv210_pdma1_pdata,
 	},
-};
-
-static struct platform_device *s5pv210_dmacs[] __initdata = {
-	&s5pv210_device_pdma0,
-	&s5pv210_device_pdma1,
+	.res = {
+		.start = S5PV210_PA_PDMA1,
+		.end = S5PV210_PA_PDMA1 + SZ_4K,
+		.flags = IORESOURCE_MEM,
+	},
+	.irq = {IRQ_PDMA1, NO_IRQ},
+	.periphid = 0x00041330,
 };
 
 static int __init s5pv210_dma_init(void)
 {
-	platform_add_devices(s5pv210_dmacs, ARRAY_SIZE(s5pv210_dmacs));
+	amba_device_register(&s5pv210_device_pdma0, &iomem_resource);
+	amba_device_register(&s5pv210_device_pdma1, &iomem_resource);
 
 	return 0;
 }

arch/arm/mach-s5pv210/include/mach/dma.h

@@ -20,7 +20,7 @@
 #ifndef __MACH_DMA_H
 #define __MACH_DMA_H
 
-/* This platform uses the common S3C DMA API driver for PL330 */
-#include <plat/s3c-dma-pl330.h>
+/* This platform uses the common DMA API driver for PL330 */
+#include <plat/dma-pl330.h>
 
 #endif /* __MACH_DMA_H */

arch/arm/mach-s5pv210/include/mach/i2c-hdmiphy.h

@@ -0,0 +1,16 @@
+/*
+ * Copyright (C) 2011 Samsung Electronics Co., Ltd.
+ *
+ * S5P series i2c hdmiphy helper definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef PLAT_S5P_I2C_HDMIPHY_H_
+#define PLAT_S5P_I2C_HDMIPHY_H_
+
+#define S5P_I2C_HDMIPHY_BUS_NUM		(3)
+
+#endif

arch/arm/mach-s5pv210/include/mach/irqs.h

@@ -56,7 +56,7 @@
 #define IRQ_SPI2		S5P_IRQ_VIC1(17)
 #define IRQ_IRDA		S5P_IRQ_VIC1(18)
 #define IRQ_IIC2		S5P_IRQ_VIC1(19)
-#define IRQ_IIC3		S5P_IRQ_VIC1(20)
+#define IRQ_IIC_HDMIPHY		S5P_IRQ_VIC1(20)
 #define IRQ_HSIRX		S5P_IRQ_VIC1(21)
 #define IRQ_HSITX		S5P_IRQ_VIC1(22)
 #define IRQ_UHOST		S5P_IRQ_VIC1(23)
@@ -86,7 +86,7 @@
 #define IRQ_HDMI		S5P_IRQ_VIC2(12)
 #define IRQ_IIC1		S5P_IRQ_VIC2(13)
 #define IRQ_MFC			S5P_IRQ_VIC2(14)
-#define IRQ_TVENC		S5P_IRQ_VIC2(15)
+#define IRQ_SDO			S5P_IRQ_VIC2(15)
 #define IRQ_I2S0		S5P_IRQ_VIC2(16)
 #define IRQ_I2S1		S5P_IRQ_VIC2(17)
 #define IRQ_I2S2		S5P_IRQ_VIC2(18)

arch/arm/mach-s5pv210/include/mach/map.h

@@ -90,6 +90,12 @@
 #define S5PV210_PA_FIMC1		0xFB300000
 #define S5PV210_PA_FIMC2		0xFB400000
 
+#define S5PV210_PA_SDO			0xF9000000
+#define S5PV210_PA_VP			0xF9100000
+#define S5PV210_PA_MIXER		0xF9200000
+#define S5PV210_PA_HDMI			0xFA100000
+#define S5PV210_PA_IIC_HDMIPHY		0xFA900000
+
 /* Compatibiltiy Defines */
 
 #define S3C_PA_FB			S5PV210_PA_FB
@@ -110,6 +116,13 @@
 #define S5P_PA_FIMC2			S5PV210_PA_FIMC2
 #define S5P_PA_MIPI_CSIS0		S5PV210_PA_MIPI_CSIS
 #define S5P_PA_MFC			S5PV210_PA_MFC
+#define S5P_PA_IIC_HDMIPHY		S5PV210_PA_IIC_HDMIPHY
+
+#define S5P_PA_SDO			S5PV210_PA_SDO
+#define S5P_PA_VP			S5PV210_PA_VP
+#define S5P_PA_MIXER			S5PV210_PA_MIXER
+#define S5P_PA_HDMI			S5PV210_PA_HDMI
+
 #define S5P_PA_ONENAND			S5PC110_PA_ONENAND
 #define S5P_PA_ONENAND_DMA		S5PC110_PA_ONENAND_DMA
 #define S5P_PA_SDRAM			S5PV210_PA_SDRAM

arch/arm/mach-s5pv210/include/mach/pm-core.h

@@ -43,4 +43,4 @@ static inline void s3c_pm_arch_update_uart(void __iomem *regs,
 }
 
 static inline void s3c_pm_restored_gpios(void) { }
-static inline void s3c_pm_saved_gpios(void) { }
+static inline void samsung_pm_saved_gpios(void) { }

arch/arm/mach-s5pv210/include/mach/regs-clock.h

@@ -144,8 +144,9 @@
 
 #define S5P_OTHERS		S5P_CLKREG(0xE000)
 #define S5P_OM_STAT		S5P_CLKREG(0xE100)
+#define S5P_HDMI_PHY_CONTROL	S5P_CLKREG(0xE804)
 #define S5P_USB_PHY_CONTROL	S5P_CLKREG(0xE80C)
-#define S5P_DAC_CONTROL		S5P_CLKREG(0xE810)
+#define S5P_DAC_PHY_CONTROL	S5P_CLKREG(0xE810)
 #define S5P_MIPI_DPHY_CONTROL(x) S5P_CLKREG(0xE814)
 #define S5P_MIPI_DPHY_ENABLE	(1 << 0)
 #define S5P_MIPI_DPHY_SRESETN	(1 << 1)

arch/arm/mach-s5pv210/mach-goni.c

@@ -48,6 +48,11 @@
 #include <plat/s5p-time.h>
 #include <plat/mfc.h>
 #include <plat/regs-fb-v4.h>
+#include <plat/camport.h>
+
+#include <media/v4l2-mediabus.h>
+#include <media/s5p_fimc.h>
+#include <media/noon010pc30.h>
 
 /* Following are default values for UCON, ULCON and UFCON UART registers */
 #define GONI_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
@@ -272,6 +277,14 @@ static void __init goni_tsp_init(void)
 	i2c2_devs[0].irq = gpio_to_irq(gpio);
 }
 
+static void goni_camera_init(void)
+{
+	s5pv210_fimc_setup_gpio(S5P_CAMPORT_A);
+
+	/* Set max driver strength on CAM_A_CLKOUT pin. */
+	s5p_gpio_set_drvstr(S5PV210_GPE1(3), S5P_GPIO_DRVSTR_LV4);
+}
+
 /* MAX8998 regulators */
 #if defined(CONFIG_REGULATOR_MAX8998) || defined(CONFIG_REGULATOR_MAX8998_MODULE)
 
@@ -285,6 +298,7 @@ static struct regulator_consumer_supply goni_ldo5_consumers[] = {
 
 static struct regulator_consumer_supply goni_ldo8_consumers[] = {
 	REGULATOR_SUPPLY("vusb_d", "s3c-hsotg"),
+	REGULATOR_SUPPLY("vdd33a_dac", "s5p-sdo"),
 };
 
 static struct regulator_consumer_supply goni_ldo11_consumers[] = {
@@ -475,6 +489,10 @@ static struct regulator_consumer_supply buck1_consumer =
 static struct regulator_consumer_supply buck2_consumer =
 	REGULATOR_SUPPLY("vddint", NULL);
 
+static struct regulator_consumer_supply buck3_consumer =
+	REGULATOR_SUPPLY("vdet", "s5p-sdo");
+
+
 static struct regulator_init_data goni_buck1_data = {
 	.constraints	= {
 		.name		= "VARM_1.2V",
@@ -511,6 +529,8 @@ static struct regulator_init_data goni_buck3_data = {
 			.enabled = 1,
 		},
 	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &buck3_consumer,
 };
 
 static struct regulator_init_data goni_buck4_data = {
@@ -801,6 +821,39 @@ static void goni_setup_sdhci(void)
 	s3c_sdhci2_set_platdata(&goni_hsmmc2_data);
 };
 
+static struct noon010pc30_platform_data noon010pc30_pldata = {
+	.clk_rate	= 16000000UL,
+	.gpio_nreset	= S5PV210_GPB(2), /* CAM_CIF_NRST */
+	.gpio_nstby	= S5PV210_GPB(0), /* CAM_CIF_NSTBY */
+};
+
+static struct i2c_board_info noon010pc30_board_info = {
+	I2C_BOARD_INFO("NOON010PC30", 0x60 >> 1),
+	.platform_data = &noon010pc30_pldata,
+};
+
+static struct s5p_fimc_isp_info goni_camera_sensors[] = {
+	{
+		.mux_id		= 0,
+		.flags		= V4L2_MBUS_PCLK_SAMPLE_FALLING |
+				  V4L2_MBUS_VSYNC_ACTIVE_LOW,
+		.bus_type	= FIMC_ITU_601,
+		.board_info	= &noon010pc30_board_info,
+		.i2c_bus_num	= 0,
+		.clk_frequency	= 16000000UL,
+	},
+};
+
+struct s5p_platform_fimc goni_fimc_md_platdata __initdata = {
+	.isp_info	= goni_camera_sensors,
+	.num_clients	= ARRAY_SIZE(goni_camera_sensors),
+};
+
+struct platform_device s5p_device_fimc_md = {
+	.name		= "s5p-fimc-md",
+	.id		= -1,
+};
+
 static struct platform_device *goni_devices[] __initdata = {
 	&s3c_device_fb,
 	&s5p_device_onenand,
@@ -812,10 +865,13 @@ static struct platform_device *goni_devices[] __initdata = {
 	&s5p_device_mfc,
 	&s5p_device_mfc_l,
 	&s5p_device_mfc_r,
+	&s5p_device_mixer,
+	&s5p_device_sdo,
 	&s3c_device_i2c0,
 	&s5p_device_fimc0,
 	&s5p_device_fimc1,
 	&s5p_device_fimc2,
+	&s5p_device_fimc_md,
 	&s3c_device_hsmmc0,
 	&s3c_device_hsmmc1,
 	&s3c_device_hsmmc2,
@@ -884,6 +940,12 @@ static void __init goni_machine_init(void)
 	/* FB */
 	s3c_fb_set_platdata(&goni_lcd_pdata);
 
+	/* FIMC */
+	s3c_set_platdata(&goni_fimc_md_platdata, sizeof(goni_fimc_md_platdata),
+			 &s5p_device_fimc_md);
+
+	goni_camera_init();
+
 	/* SPI */
 	spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
 

arch/arm/plat-s3c24xx/Kconfig

@@ -9,7 +9,6 @@ config PLAT_S3C24XX
 	select NO_IOPORT
 	select ARCH_REQUIRE_GPIOLIB
 	select S3C_DEV_NAND
-	select S3C_GPIO_CFG_S3C24XX
 	help
 	  Base platform code for any Samsung S3C24XX device
 

arch/arm/plat-s3c24xx/Makefile

@@ -15,8 +15,6 @@ obj-				:=
 obj-y				+= cpu.o
 obj-y				+= irq.o
 obj-y				+= devs.o
-obj-y				+= gpio.o
-obj-y				+= gpiolib.o
 obj-y				+= clock.o
 obj-$(CONFIG_S3C24XX_DCLK)	+= clock-dclk.o
 

arch/arm/plat-s3c24xx/dma.c

@@ -1094,14 +1094,14 @@ EXPORT_SYMBOL(s3c2410_dma_config);
  *
  * configure the dma source/destination hardware type and address
  *
- * source:    S3C2410_DMASRC_HW: source is hardware
- *            S3C2410_DMASRC_MEM: source is memory
+ * source:    DMA_FROM_DEVICE: source is hardware
+ *            DMA_TO_DEVICE: source is memory
  *
  * devaddr:   physical address of the source
 */
 
 int s3c2410_dma_devconfig(enum dma_ch channel,
-			  enum s3c2410_dmasrc source,
+			  enum dma_data_direction source,
 			  unsigned long devaddr)
 {
 	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
@@ -1131,7 +1131,7 @@ int s3c2410_dma_devconfig(enum dma_ch channel,
 	 hwcfg |= S3C2410_DISRCC_INC;
 
 	switch (source) {
-	case S3C2410_DMASRC_HW:
+	case DMA_FROM_DEVICE:
 		/* source is hardware */
 		pr_debug("%s: hw source, devaddr=%08lx, hwcfg=%d\n",
 			 __func__, devaddr, hwcfg);
@@ -1142,7 +1142,7 @@ int s3c2410_dma_devconfig(enum dma_ch channel,
 		chan->addr_reg = dma_regaddr(chan, S3C2410_DMA_DIDST);
 		break;
 
-	case S3C2410_DMASRC_MEM:
+	case DMA_TO_DEVICE:
 		/* source is memory */
 		pr_debug("%s: mem source, devaddr=%08lx, hwcfg=%d\n",
 			 __func__, devaddr, hwcfg);

arch/arm/plat-s3c24xx/gpio.c

@@ -1,96 +0,0 @@
-/* linux/arch/arm/plat-s3c24xx/gpio.c
- *
- * Copyright (c) 2004-2010 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C24XX GPIO support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/gpio.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/gpio-fns.h>
-#include <asm/irq.h>
-
-#include <mach/regs-gpio.h>
-
-#include <plat/gpio-core.h>
-
-/* gpiolib wrappers until these are totally eliminated */
-
-void s3c2410_gpio_pullup(unsigned int pin, unsigned int to)
-{
-	int ret;
-
-	WARN_ON(to);	/* should be none of these left */
-
-	if (!to) {
-		/* if pull is enabled, try first with up, and if that
-		 * fails, try using down */
-
-		ret = s3c_gpio_setpull(pin, S3C_GPIO_PULL_UP);
-		if (ret)
-			s3c_gpio_setpull(pin, S3C_GPIO_PULL_DOWN);
-	} else {
-		s3c_gpio_setpull(pin, S3C_GPIO_PULL_NONE);
-	}
-}
-EXPORT_SYMBOL(s3c2410_gpio_pullup);
-
-void s3c2410_gpio_setpin(unsigned int pin, unsigned int to)
-{
-	/* do this via gpiolib until all users removed */
-
-	gpio_request(pin, "temporary");
-	gpio_set_value(pin, to);
-	gpio_free(pin);
-}
-
-EXPORT_SYMBOL(s3c2410_gpio_setpin);
-
-unsigned int s3c2410_gpio_getpin(unsigned int pin)
-{
-	struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
-	unsigned long offs = pin - chip->chip.base;
-
-	return __raw_readl(chip->base + 0x04) & (1<< offs);
-}
-
-EXPORT_SYMBOL(s3c2410_gpio_getpin);
-
-unsigned int s3c2410_modify_misccr(unsigned int clear, unsigned int change)
-{
-	unsigned long flags;
-	unsigned long misccr;
-
-	local_irq_save(flags);
-	misccr = __raw_readl(S3C24XX_MISCCR);
-	misccr &= ~clear;
-	misccr ^= change;
-	__raw_writel(misccr, S3C24XX_MISCCR);
-	local_irq_restore(flags);
-
-	return misccr;
-}
-
-EXPORT_SYMBOL(s3c2410_modify_misccr);

arch/arm/plat-s3c24xx/gpiolib.c

@@ -1,229 +0,0 @@
-/* linux/arch/arm/plat-s3c24xx/gpiolib.c
- *
- * Copyright (c) 2008-2010 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C24XX GPIOlib support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License.
-*/
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/sysdev.h>
-#include <linux/ioport.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-
-#include <plat/gpio-core.h>
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-cfg-helpers.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <plat/pm.h>
-
-#include <mach/regs-gpio.h>
-
-static int s3c24xx_gpiolib_banka_input(struct gpio_chip *chip, unsigned offset)
-{
-	return -EINVAL;
-}
-
-static int s3c24xx_gpiolib_banka_output(struct gpio_chip *chip,
-					unsigned offset, int value)
-{
-	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
-	void __iomem *base = ourchip->base;
-	unsigned long flags;
-	unsigned long dat;
-	unsigned long con;
-
-	local_irq_save(flags);
-
-	con = __raw_readl(base + 0x00);
-	dat = __raw_readl(base + 0x04);
-
-	dat &= ~(1 << offset);
-	if (value)
-		dat |= 1 << offset;
-
-	__raw_writel(dat, base + 0x04);
-
-	con &= ~(1 << offset);
-
-	__raw_writel(con, base + 0x00);
-	__raw_writel(dat, base + 0x04);
-
-	local_irq_restore(flags);
-	return 0;
-}
-
-static int s3c24xx_gpiolib_bankf_toirq(struct gpio_chip *chip, unsigned offset)
-{
-	if (offset < 4)
-		return IRQ_EINT0 + offset;
-	
-	if (offset < 8)
-		return IRQ_EINT4 + offset - 4;
-	
-	return -EINVAL;
-}
-
-static struct s3c_gpio_cfg s3c24xx_gpiocfg_banka = {
-	.set_config	= s3c_gpio_setcfg_s3c24xx_a,
-	.get_config	= s3c_gpio_getcfg_s3c24xx_a,
-};
-
-struct s3c_gpio_cfg s3c24xx_gpiocfg_default = {
-	.set_config	= s3c_gpio_setcfg_s3c24xx,
-	.get_config	= s3c_gpio_getcfg_s3c24xx,
-};
-
-struct s3c_gpio_chip s3c24xx_gpios[] = {
-	[0] = {
-		.base	= S3C2410_GPACON,
-		.pm	= __gpio_pm(&s3c_gpio_pm_1bit),
-		.config	= &s3c24xx_gpiocfg_banka,
-		.chip	= {
-			.base			= S3C2410_GPA(0),
-			.owner			= THIS_MODULE,
-			.label			= "GPIOA",
-			.ngpio			= 24,
-			.direction_input	= s3c24xx_gpiolib_banka_input,
-			.direction_output	= s3c24xx_gpiolib_banka_output,
-		},
-	},
-	[1] = {
-		.base	= S3C2410_GPBCON,
-		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
-		.chip	= {
-			.base			= S3C2410_GPB(0),
-			.owner			= THIS_MODULE,
-			.label			= "GPIOB",
-			.ngpio			= 16,
-		},
-	},
-	[2] = {
-		.base	= S3C2410_GPCCON,
-		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
-		.chip	= {
-			.base			= S3C2410_GPC(0),
-			.owner			= THIS_MODULE,
-			.label			= "GPIOC",
-			.ngpio			= 16,
-		},
-	},
-	[3] = {
-		.base	= S3C2410_GPDCON,
-		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
-		.chip	= {
-			.base			= S3C2410_GPD(0),
-			.owner			= THIS_MODULE,
-			.label			= "GPIOD",
-			.ngpio			= 16,
-		},
-	},
-	[4] = {
-		.base	= S3C2410_GPECON,
-		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
-		.chip	= {
-			.base			= S3C2410_GPE(0),
-			.label			= "GPIOE",
-			.owner			= THIS_MODULE,
-			.ngpio			= 16,
-		},
-	},
-	[5] = {
-		.base	= S3C2410_GPFCON,
-		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
-		.chip	= {
-			.base			= S3C2410_GPF(0),
-			.owner			= THIS_MODULE,
-			.label			= "GPIOF",
-			.ngpio			= 8,
-			.to_irq			= s3c24xx_gpiolib_bankf_toirq,
-		},
-	},
-	[6] = {
-		.base	= S3C2410_GPGCON,
-		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
-		.irq_base = IRQ_EINT8,
-		.chip	= {
-			.base			= S3C2410_GPG(0),
-			.owner			= THIS_MODULE,
-			.label			= "GPIOG",
-			.ngpio			= 16,
-			.to_irq			= samsung_gpiolib_to_irq,
-		},
-	}, {
-		.base	= S3C2410_GPHCON,
-		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
-		.chip	= {
-			.base			= S3C2410_GPH(0),
-			.owner			= THIS_MODULE,
-			.label			= "GPIOH",
-			.ngpio			= 11,
-		},
-	},
-		/* GPIOS for the S3C2443 and later devices. */
-	{
-		.base	= S3C2440_GPJCON,
-		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
-		.chip	= {
-			.base			= S3C2410_GPJ(0),
-			.owner			= THIS_MODULE,
-			.label			= "GPIOJ",
-			.ngpio			= 16,
-		},
-	}, {
-		.base	= S3C2443_GPKCON,
-		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
-		.chip	= {
-			.base			= S3C2410_GPK(0),
-			.owner			= THIS_MODULE,
-			.label			= "GPIOK",
-			.ngpio			= 16,
-		},
-	}, {
-		.base	= S3C2443_GPLCON,
-		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
-		.chip	= {
-			.base			= S3C2410_GPL(0),
-			.owner			= THIS_MODULE,
-			.label			= "GPIOL",
-			.ngpio			= 15,
-		},
-	}, {
-		.base	= S3C2443_GPMCON,
-		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
-		.chip	= {
-			.base			= S3C2410_GPM(0),
-			.owner			= THIS_MODULE,
-			.label			= "GPIOM",
-			.ngpio			= 2,
-		},
-	},
-};
-
-
-static __init int s3c24xx_gpiolib_init(void)
-{
-	struct s3c_gpio_chip *chip = s3c24xx_gpios;
-	int gpn;
-
-	for (gpn = 0; gpn < ARRAY_SIZE(s3c24xx_gpios); gpn++, chip++) {
-		if (!chip->config)
-			chip->config = &s3c24xx_gpiocfg_default;
-
-		s3c_gpiolib_add(chip);
-	}
-
-	return 0;
-}
-
-core_initcall(s3c24xx_gpiolib_init);

arch/arm/plat-s3c24xx/s3c2443-clock.c

@@ -205,9 +205,64 @@ static struct clksrc_clk clksrc_clks[] = {
 	},
 };
 
+static struct clk clk_i2s_ext = {
+	.name		= "i2s-ext",
+};
+
+/* i2s_eplldiv
+ *
+ * This clock is the output from the I2S divisor of ESYSCLK, and is separate
+ * from the mux that comes after it (cannot merge into one single clock)
+*/
+
+static struct clksrc_clk clk_i2s_eplldiv = {
+	.clk	= {
+		.name		= "i2s-eplldiv",
+		.parent		= &clk_esysclk.clk,
+	},
+	.reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 12, },
+};
+
+/* i2s-ref
+ *
+ * i2s bus reference clock, selectable from external, esysclk or epllref
+ *
+ * Note, this used to be two clocks, but was compressed into one.
+*/
+
+static struct clk *clk_i2s_srclist[] = {
+	[0] = &clk_i2s_eplldiv.clk,
+	[1] = &clk_i2s_ext,
+	[2] = &clk_epllref.clk,
+	[3] = &clk_epllref.clk,
+};
+
+static struct clksrc_clk clk_i2s = {
+	.clk	= {
+		.name		= "i2s-if",
+		.ctrlbit	= S3C2443_SCLKCON_I2SCLK,
+		.enable		= s3c2443_clkcon_enable_s,
+
+	},
+	.sources = &(struct clksrc_sources) {
+		.sources = clk_i2s_srclist,
+		.nr_sources = ARRAY_SIZE(clk_i2s_srclist),
+	},
+	.reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 14 },
+};
 
 static struct clk init_clocks_off[] = {
 	{
+		.name		= "iis",
+		.parent		= &clk_p,
+		.enable		= s3c2443_clkcon_enable_p,
+		.ctrlbit	= S3C2443_PCLKCON_IIS,
+	}, {
+		.name		= "hsspi",
+		.parent		= &clk_p,
+		.enable		= s3c2443_clkcon_enable_p,
+		.ctrlbit	= S3C2443_PCLKCON_HSSPI,
+	}, {
 		.name		= "adc",
 		.parent		= &clk_p,
 		.enable		= s3c2443_clkcon_enable_p,
@@ -406,6 +461,8 @@ static struct clk *clks[] __initdata = {
 };
 
 static struct clksrc_clk *clksrcs[] __initdata = {
+	&clk_i2s_eplldiv,
+	&clk_i2s,
 	&clk_usb_bus_host,
 	&clk_epllref,
 	&clk_esysclk,

arch/arm/plat-s5p/Kconfig

@@ -16,9 +16,6 @@ config PLAT_S5P
 	select S3C_GPIO_TRACK
 	select S5P_GPIO_DRVSTR
 	select SAMSUNG_GPIOLIB_4BIT
-	select S3C_GPIO_CFG_S3C64XX
-	select S3C_GPIO_PULL_UPDOWN
-	select S3C_GPIO_CFG_S3C24XX
 	select PLAT_SAMSUNG
 	select SAMSUNG_CLKSRC
 	select SAMSUNG_IRQ_VIC_TIMER
@@ -76,6 +73,11 @@ config S5P_DEV_FIMD0
 	help
 	  Compile in platform device definitions for FIMD controller 0
 
+config S5P_DEV_I2C_HDMIPHY
+	bool
+	help
+	  Compile in platform device definitions for I2C HDMIPHY controller
+
 config S5P_DEV_MFC
 	bool
 	help
@@ -96,6 +98,11 @@ config S5P_DEV_CSIS1
 	help
 	  Compile in platform device definitions for MIPI-CSIS channel 1
 
+config S5P_DEV_TV
+	bool
+	help
+	  Compile in platform device definition for TV interface
+
 config S5P_DEV_USB_EHCI
 	bool
 	help

arch/arm/plat-s5p/Makefile

@@ -31,8 +31,10 @@ obj-$(CONFIG_S5P_DEV_FIMC1)	+= dev-fimc1.o
 obj-$(CONFIG_S5P_DEV_FIMC2)	+= dev-fimc2.o
 obj-$(CONFIG_S5P_DEV_FIMC3)	+= dev-fimc3.o
 obj-$(CONFIG_S5P_DEV_FIMD0)	+= dev-fimd0.o
+obj-$(CONFIG_S5P_DEV_I2C_HDMIPHY) += dev-i2c-hdmiphy.o
 obj-$(CONFIG_S5P_DEV_ONENAND)	+= dev-onenand.o
 obj-$(CONFIG_S5P_DEV_CSIS0)	+= dev-csis0.o
 obj-$(CONFIG_S5P_DEV_CSIS1)	+= dev-csis1.o
+obj-$(CONFIG_S5P_DEV_TV)	+= dev-tv.o
 obj-$(CONFIG_S5P_DEV_USB_EHCI)	+= dev-ehci.o
 obj-$(CONFIG_S5P_SETUP_MIPIPHY)	+= setup-mipiphy.o

arch/arm/plat-s5p/dev-i2c-hdmiphy.c

@@ -0,0 +1,59 @@
+/*
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5P series device definition for i2c for hdmiphy device
+ *
+ * Based on plat-samsung/dev-i2c7.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/gfp.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+#include <mach/i2c-hdmiphy.h>
+
+#include <plat/regs-iic.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/iic.h>
+
+static struct resource s5p_i2c_resource[] = {
+	[0] = {
+		.start = S5P_PA_IIC_HDMIPHY,
+		.end   = S5P_PA_IIC_HDMIPHY + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_IIC_HDMIPHY,
+		.end   = IRQ_IIC_HDMIPHY,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device s5p_device_i2c_hdmiphy = {
+	.name		  = "s3c2440-hdmiphy-i2c",
+	.id		  = -1,
+	.num_resources	  = ARRAY_SIZE(s5p_i2c_resource),
+	.resource	  = s5p_i2c_resource,
+};
+
+void __init s5p_i2c_hdmiphy_set_platdata(struct s3c2410_platform_i2c *pd)
+{
+	struct s3c2410_platform_i2c *npd;
+
+	if (!pd) {
+		pd = &default_i2c_data;
+		pd->bus_num = S5P_I2C_HDMIPHY_BUS_NUM;
+	}
+
+	npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c),
+			       &s5p_device_i2c_hdmiphy);
+}

arch/arm/plat-s5p/dev-tv.c

@@ -0,0 +1,98 @@
+/* linux/arch/arm/plat-s5p/dev-tv.c
+ *
+ * Copyright (C) 2011 Samsung Electronics Co.Ltd
+ * Author: Tomasz Stanislawski <t.stanislaws@samsung.com>
+ *
+ * S5P series device definition for TV device
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/dma-mapping.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+
+#include <plat/devs.h>
+
+/* HDMI interface */
+static struct resource s5p_hdmi_resources[] = {
+	[0] = {
+		.start	= S5P_PA_HDMI,
+		.end	= S5P_PA_HDMI + SZ_1M - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_HDMI,
+		.end	= IRQ_HDMI,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device s5p_device_hdmi = {
+	.name		= "s5p-hdmi",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(s5p_hdmi_resources),
+	.resource	= s5p_hdmi_resources,
+};
+EXPORT_SYMBOL(s5p_device_hdmi);
+
+/* SDO interface */
+static struct resource s5p_sdo_resources[] = {
+	[0] = {
+		.start	= S5P_PA_SDO,
+		.end	= S5P_PA_SDO + SZ_64K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_SDO,
+		.end	= IRQ_SDO,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+struct platform_device s5p_device_sdo = {
+	.name		= "s5p-sdo",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(s5p_sdo_resources),
+	.resource	= s5p_sdo_resources,
+};
+EXPORT_SYMBOL(s5p_device_sdo);
+
+/* MIXER */
+static struct resource s5p_mixer_resources[] = {
+	[0] = {
+		.start	= S5P_PA_MIXER,
+		.end	= S5P_PA_MIXER + SZ_64K - 1,
+		.flags	= IORESOURCE_MEM,
+		.name	= "mxr"
+	},
+	[1] = {
+		.start	= S5P_PA_VP,
+		.end	= S5P_PA_VP + SZ_64K - 1,
+		.flags	= IORESOURCE_MEM,
+		.name	= "vp"
+	},
+	[2] = {
+		.start	= IRQ_MIXER,
+		.end	= IRQ_MIXER,
+		.flags	= IORESOURCE_IRQ,
+		.name	= "irq"
+	}
+};
+
+static u64 s5p_tv_dmamask = DMA_BIT_MASK(32);
+
+struct platform_device s5p_device_mixer = {
+	.name		= "s5p-mixer",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(s5p_mixer_resources),
+	.resource	= s5p_mixer_resources,
+	.dev		= {
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+		.dma_mask = &s5p_tv_dmamask,
+	}
+};
+EXPORT_SYMBOL(s5p_device_mixer);

arch/arm/plat-s5p/include/plat/pll.h

@@ -97,15 +97,24 @@ static inline unsigned long s5p_get_pll45xx(unsigned long baseclk, u32 pll_con,
 	return (unsigned long)fvco;
 }
 
-#define PLL46XX_KDIV_MASK	(0xFFFF)
-#define PLL4650C_KDIV_MASK	(0xFFF)
+/* CON0 bit-fields */
 #define PLL46XX_MDIV_MASK	(0x1FF)
 #define PLL46XX_PDIV_MASK	(0x3F)
 #define PLL46XX_SDIV_MASK	(0x7)
+#define PLL46XX_LOCKED_SHIFT	(29)
 #define PLL46XX_MDIV_SHIFT	(16)
 #define PLL46XX_PDIV_SHIFT	(8)
 #define PLL46XX_SDIV_SHIFT	(0)
 
+/* CON1 bit-fields */
+#define PLL46XX_MRR_MASK	(0x1F)
+#define PLL46XX_MFR_MASK	(0x3F)
+#define PLL46XX_KDIV_MASK	(0xFFFF)
+#define PLL4650C_KDIV_MASK	(0xFFF)
+#define PLL46XX_MRR_SHIFT	(24)
+#define PLL46XX_MFR_SHIFT	(16)
+#define PLL46XX_KDIV_SHIFT	(0)
+
 enum pll46xx_type_t {
 	pll_4600,
 	pll_4650,
@@ -148,6 +157,7 @@ static inline unsigned long s5p_get_pll46xx(unsigned long baseclk,
 #define PLL90XX_PDIV_MASK	(0x3F)
 #define PLL90XX_SDIV_MASK	(0x7)
 #define PLL90XX_KDIV_MASK	(0xffff)
+#define PLL90XX_LOCKED_SHIFT	(29)
 #define PLL90XX_MDIV_SHIFT	(16)
 #define PLL90XX_PDIV_SHIFT	(8)
 #define PLL90XX_SDIV_SHIFT	(0)

arch/arm/plat-s5p/irq-gpioint.c

@@ -37,7 +37,7 @@ struct s5p_gpioint_bank {
 	int			start;
 	int			nr_groups;
 	int			irq;
-	struct s3c_gpio_chip	**chips;
+	struct samsung_gpio_chip	**chips;
 	void			(*handler)(unsigned int, struct irq_desc *);
 };
 
@@ -87,7 +87,7 @@ static void s5p_gpioint_handler(unsigned int irq, struct irq_desc *desc)
 	chained_irq_enter(chip, desc);
 
 	for (group = 0; group < bank->nr_groups; group++) {
-		struct s3c_gpio_chip *chip = bank->chips[group];
+		struct samsung_gpio_chip *chip = bank->chips[group];
 		if (!chip)
 			continue;
 
@@ -110,7 +110,7 @@ static void s5p_gpioint_handler(unsigned int irq, struct irq_desc *desc)
 	chained_irq_exit(chip, desc);
 }
 
-static __init int s5p_gpioint_add(struct s3c_gpio_chip *chip)
+static __init int s5p_gpioint_add(struct samsung_gpio_chip *chip)
 {
 	static int used_gpioint_groups = 0;
 	int group = chip->group;
@@ -131,7 +131,7 @@ static __init int s5p_gpioint_add(struct s3c_gpio_chip *chip)
 		return -EINVAL;
 
 	if (!bank->handler) {
-		bank->chips = kzalloc(sizeof(struct s3c_gpio_chip *) *
+		bank->chips = kzalloc(sizeof(struct samsung_gpio_chip *) *
 				      bank->nr_groups, GFP_KERNEL);
 		if (!bank->chips)
 			return -ENOMEM;
@@ -174,7 +174,7 @@ static __init int s5p_gpioint_add(struct s3c_gpio_chip *chip)
 
 int __init s5p_register_gpio_interrupt(int pin)
 {
-	struct s3c_gpio_chip *my_chip = s3c_gpiolib_getchip(pin);
+	struct samsung_gpio_chip *my_chip = samsung_gpiolib_getchip(pin);
 	int offset, group;
 	int ret;
 

arch/arm/plat-samsung/Kconfig

@@ -79,39 +79,12 @@ config SAMSUNG_GPIOLIB_4BIT
 	  configuration. GPIOlib shall be compiled only for S3C64XX and S5P
 	  series of processors.
 
-config S3C_GPIO_CFG_S3C24XX
-	bool
-	help
-	  Internal configuration to enable S3C24XX style GPIO configuration
-	  functions.
-
 config S3C_GPIO_CFG_S3C64XX
 	bool
 	help
 	  Internal configuration to enable S3C64XX style GPIO configuration
 	  functions.
 
-config S3C_GPIO_PULL_UPDOWN
-	bool
-	help
-	  Internal configuration to enable the correct GPIO pull helper
-
-config S3C_GPIO_PULL_S3C2443
-	bool
-	select S3C_GPIO_PULL_UPDOWN
-	help
-	  Internal configuration to enable the correct GPIO pull helper for S3C2443-style GPIO
-
-config S3C_GPIO_PULL_DOWN
-	bool
-	help
-	  Internal configuration to enable the correct GPIO pull helper
-
-config S3C_GPIO_PULL_UP
-	bool
-	help
-	  Internal configuration to enable the correct GPIO pull helper
-
 config S5P_GPIO_DRVSTR
 	bool
 	help
@@ -300,11 +273,14 @@ config S3C_DMA
 	help
 	  Internal configuration for S3C DMA core
 
-config S3C_PL330_DMA
+config SAMSUNG_DMADEV
 	bool
-	select PL330
+	select DMADEVICES
+	select PL330_DMA if (CPU_EXYNOS4210 || CPU_S5PV210 || CPU_S5PC100 || \
+					CPU_S5P6450 || CPU_S5P6440)
+	select ARM_AMBA
 	help
-	  S3C DMA API Driver for PL330 DMAC.
+	  Use DMA device engine for PL330 DMAC.
 
 comment "Power management"
 

arch/arm/plat-samsung/Makefile

@@ -15,8 +15,6 @@ obj-y				+= init.o cpu.o
 obj-$(CONFIG_ARCH_USES_GETTIMEOFFSET)   += time.o
 obj-y				+= clock.o
 obj-y				+= pwm-clock.o
-obj-y				+= gpio.o
-obj-y				+= gpio-config.o
 obj-y				+= dev-asocdma.o
 
 obj-$(CONFIG_SAMSUNG_CLKSRC)	+= clock-clksrc.o
@@ -63,9 +61,9 @@ obj-$(CONFIG_SAMSUNG_DEV_BACKLIGHT)	+= dev-backlight.o
 
 # DMA support
 
-obj-$(CONFIG_S3C_DMA)		+= dma.o
+obj-$(CONFIG_S3C_DMA)		+= dma.o s3c-dma-ops.o
 
-obj-$(CONFIG_S3C_PL330_DMA)	+= s3c-pl330.o
+obj-$(CONFIG_SAMSUNG_DMADEV)	+= dma-ops.o
 
 # PM support
 

arch/arm/plat-samsung/dma-ops.c

@@ -0,0 +1,131 @@
+/* linux/arch/arm/plat-samsung/dma-ops.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Samsung DMA Operations
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/amba/pl330.h>
+#include <linux/scatterlist.h>
+
+#include <mach/dma.h>
+
+static inline bool pl330_filter(struct dma_chan *chan, void *param)
+{
+	struct dma_pl330_peri *peri = chan->private;
+	return peri->peri_id == (unsigned)param;
+}
+
+static unsigned samsung_dmadev_request(enum dma_ch dma_ch,
+				struct samsung_dma_info *info)
+{
+	struct dma_chan *chan;
+	dma_cap_mask_t mask;
+	struct dma_slave_config slave_config;
+
+	dma_cap_zero(mask);
+	dma_cap_set(info->cap, mask);
+
+	chan = dma_request_channel(mask, pl330_filter, (void *)dma_ch);
+
+	if (info->direction == DMA_FROM_DEVICE) {
+		memset(&slave_config, 0, sizeof(struct dma_slave_config));
+		slave_config.direction = info->direction;
+		slave_config.src_addr = info->fifo;
+		slave_config.src_addr_width = info->width;
+		slave_config.src_maxburst = 1;
+		dmaengine_slave_config(chan, &slave_config);
+	} else if (info->direction == DMA_TO_DEVICE) {
+		memset(&slave_config, 0, sizeof(struct dma_slave_config));
+		slave_config.direction = info->direction;
+		slave_config.dst_addr = info->fifo;
+		slave_config.dst_addr_width = info->width;
+		slave_config.dst_maxburst = 1;
+		dmaengine_slave_config(chan, &slave_config);
+	}
+
+	return (unsigned)chan;
+}
+
+static int samsung_dmadev_release(unsigned ch,
+			struct s3c2410_dma_client *client)
+{
+	dma_release_channel((struct dma_chan *)ch);
+
+	return 0;
+}
+
+static int samsung_dmadev_prepare(unsigned ch,
+			struct samsung_dma_prep_info *info)
+{
+	struct scatterlist sg;
+	struct dma_chan *chan = (struct dma_chan *)ch;
+	struct dma_async_tx_descriptor *desc;
+
+	switch (info->cap) {
+	case DMA_SLAVE:
+		sg_init_table(&sg, 1);
+		sg_dma_len(&sg) = info->len;
+		sg_set_page(&sg, pfn_to_page(PFN_DOWN(info->buf)),
+			    info->len, offset_in_page(info->buf));
+		sg_dma_address(&sg) = info->buf;
+
+		desc = chan->device->device_prep_slave_sg(chan,
+			&sg, 1, info->direction, DMA_PREP_INTERRUPT);
+		break;
+	case DMA_CYCLIC:
+		desc = chan->device->device_prep_dma_cyclic(chan,
+			info->buf, info->len, info->period, info->direction);
+		break;
+	default:
+		dev_err(&chan->dev->device, "unsupported format\n");
+		return -EFAULT;
+	}
+
+	if (!desc) {
+		dev_err(&chan->dev->device, "cannot prepare cyclic dma\n");
+		return -EFAULT;
+	}
+
+	desc->callback = info->fp;
+	desc->callback_param = info->fp_param;
+
+	dmaengine_submit((struct dma_async_tx_descriptor *)desc);
+
+	return 0;
+}
+
+static inline int samsung_dmadev_trigger(unsigned ch)
+{
+	dma_async_issue_pending((struct dma_chan *)ch);
+
+	return 0;
+}
+
+static inline int samsung_dmadev_flush(unsigned ch)
+{
+	return dmaengine_terminate_all((struct dma_chan *)ch);
+}
+
+struct samsung_dma_ops dmadev_ops = {
+	.request	= samsung_dmadev_request,
+	.release	= samsung_dmadev_release,
+	.prepare	= samsung_dmadev_prepare,
+	.trigger	= samsung_dmadev_trigger,
+	.started	= NULL,
+	.flush		= samsung_dmadev_flush,
+	.stop		= samsung_dmadev_flush,
+};
+
+void *samsung_dmadev_get_ops(void)
+{
+	return &dmadev_ops;
+}
+EXPORT_SYMBOL(samsung_dmadev_get_ops);

arch/arm/plat-samsung/gpio-config.c

@@ -1,431 +0,0 @@
-/* linux/arch/arm/plat-s3c/gpio-config.c
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008-2010 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C series GPIO configuration core
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/gpio.h>
-#include <linux/io.h>
-
-#include <plat/gpio-core.h>
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-cfg-helpers.h>
-
-int s3c_gpio_cfgpin(unsigned int pin, unsigned int config)
-{
-	struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
-	unsigned long flags;
-	int offset;
-	int ret;
-
-	if (!chip)
-		return -EINVAL;
-
-	offset = pin - chip->chip.base;
-
-	s3c_gpio_lock(chip, flags);
-	ret = s3c_gpio_do_setcfg(chip, offset, config);
-	s3c_gpio_unlock(chip, flags);
-
-	return ret;
-}
-EXPORT_SYMBOL(s3c_gpio_cfgpin);
-
-int s3c_gpio_cfgpin_range(unsigned int start, unsigned int nr,
-			  unsigned int cfg)
-{
-	int ret;
-
-	for (; nr > 0; nr--, start++) {
-		ret = s3c_gpio_cfgpin(start, cfg);
-		if (ret != 0)
-			return ret;
-	}
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(s3c_gpio_cfgpin_range);
-
-int s3c_gpio_cfgall_range(unsigned int start, unsigned int nr,
-			  unsigned int cfg, s3c_gpio_pull_t pull)
-{
-	int ret;
-
-	for (; nr > 0; nr--, start++) {
-		s3c_gpio_setpull(start, pull);
-		ret = s3c_gpio_cfgpin(start, cfg);
-		if (ret != 0)
-			return ret;
-	}
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(s3c_gpio_cfgall_range);
-
-unsigned s3c_gpio_getcfg(unsigned int pin)
-{
-	struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
-	unsigned long flags;
-	unsigned ret = 0;
-	int offset;
-
-	if (chip) {
-		offset = pin - chip->chip.base;
-
-		s3c_gpio_lock(chip, flags);
-		ret = s3c_gpio_do_getcfg(chip, offset);
-		s3c_gpio_unlock(chip, flags);
-	}
-
-	return ret;
-}
-EXPORT_SYMBOL(s3c_gpio_getcfg);
-
-
-int s3c_gpio_setpull(unsigned int pin, s3c_gpio_pull_t pull)
-{
-	struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
-	unsigned long flags;
-	int offset, ret;
-
-	if (!chip)
-		return -EINVAL;
-
-	offset = pin - chip->chip.base;
-
-	s3c_gpio_lock(chip, flags);
-	ret = s3c_gpio_do_setpull(chip, offset, pull);
-	s3c_gpio_unlock(chip, flags);
-
-	return ret;
-}
-EXPORT_SYMBOL(s3c_gpio_setpull);
-
-s3c_gpio_pull_t s3c_gpio_getpull(unsigned int pin)
-{
-	struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
-	unsigned long flags;
-	int offset;
-	u32 pup = 0;
-
-	if (chip) {
-		offset = pin - chip->chip.base;
-
-		s3c_gpio_lock(chip, flags);
-		pup = s3c_gpio_do_getpull(chip, offset);
-		s3c_gpio_unlock(chip, flags);
-	}
-
-	return (__force s3c_gpio_pull_t)pup;
-}
-EXPORT_SYMBOL(s3c_gpio_getpull);
-
-#ifdef CONFIG_S3C_GPIO_CFG_S3C24XX
-int s3c_gpio_setcfg_s3c24xx_a(struct s3c_gpio_chip *chip,
-			      unsigned int off, unsigned int cfg)
-{
-	void __iomem *reg = chip->base;
-	unsigned int shift = off;
-	u32 con;
-
-	if (s3c_gpio_is_cfg_special(cfg)) {
-		cfg &= 0xf;
-
-		/* Map output to 0, and SFN2 to 1 */
-		cfg -= 1;
-		if (cfg > 1)
-			return -EINVAL;
-
-		cfg <<= shift;
-	}
-
-	con = __raw_readl(reg);
-	con &= ~(0x1 << shift);
-	con |= cfg;
-	__raw_writel(con, reg);
-
-	return 0;
-}
-
-unsigned s3c_gpio_getcfg_s3c24xx_a(struct s3c_gpio_chip *chip,
-				   unsigned int off)
-{
-	u32 con;
-
-	con = __raw_readl(chip->base);
-	con >>= off;
-	con &= 1;
-	con++;
-
-	return S3C_GPIO_SFN(con);
-}
-
-int s3c_gpio_setcfg_s3c24xx(struct s3c_gpio_chip *chip,
-			    unsigned int off, unsigned int cfg)
-{
-	void __iomem *reg = chip->base;
-	unsigned int shift = off * 2;
-	u32 con;
-
-	if (s3c_gpio_is_cfg_special(cfg)) {
-		cfg &= 0xf;
-		if (cfg > 3)
-			return -EINVAL;
-
-		cfg <<= shift;
-	}
-
-	con = __raw_readl(reg);
-	con &= ~(0x3 << shift);
-	con |= cfg;
-	__raw_writel(con, reg);
-
-	return 0;
-}
-
-unsigned int s3c_gpio_getcfg_s3c24xx(struct s3c_gpio_chip *chip,
-				     unsigned int off)
-{
-	u32 con;
-
-	con = __raw_readl(chip->base);
-	con >>= off * 2;
-	con &= 3;
-
-	/* this conversion works for IN and OUT as well as special mode */
-	return S3C_GPIO_SPECIAL(con);
-}
-#endif
-
-#ifdef CONFIG_S3C_GPIO_CFG_S3C64XX
-int s3c_gpio_setcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip,
-				 unsigned int off, unsigned int cfg)
-{
-	void __iomem *reg = chip->base;
-	unsigned int shift = (off & 7) * 4;
-	u32 con;
-
-	if (off < 8 && chip->chip.ngpio > 8)
-		reg -= 4;
-
-	if (s3c_gpio_is_cfg_special(cfg)) {
-		cfg &= 0xf;
-		cfg <<= shift;
-	}
-
-	con = __raw_readl(reg);
-	con &= ~(0xf << shift);
-	con |= cfg;
-	__raw_writel(con, reg);
-
-	return 0;
-}
-
-unsigned s3c_gpio_getcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip,
-				      unsigned int off)
-{
-	void __iomem *reg = chip->base;
-	unsigned int shift = (off & 7) * 4;
-	u32 con;
-
-	if (off < 8 && chip->chip.ngpio > 8)
-		reg -= 4;
-
-	con = __raw_readl(reg);
-	con >>= shift;
-	con &= 0xf;
-
-	/* this conversion works for IN and OUT as well as special mode */
-	return S3C_GPIO_SPECIAL(con);
-}
-
-#endif /* CONFIG_S3C_GPIO_CFG_S3C64XX */
-
-#ifdef CONFIG_S3C_GPIO_PULL_UPDOWN
-int s3c_gpio_setpull_updown(struct s3c_gpio_chip *chip,
-			    unsigned int off, s3c_gpio_pull_t pull)
-{
-	void __iomem *reg = chip->base + 0x08;
-	int shift = off * 2;
-	u32 pup;
-
-	pup = __raw_readl(reg);
-	pup &= ~(3 << shift);
-	pup |= pull << shift;
-	__raw_writel(pup, reg);
-
-	return 0;
-}
-
-s3c_gpio_pull_t s3c_gpio_getpull_updown(struct s3c_gpio_chip *chip,
-					unsigned int off)
-{
-	void __iomem *reg = chip->base + 0x08;
-	int shift = off * 2;
-	u32 pup = __raw_readl(reg);
-
-	pup >>= shift;
-	pup &= 0x3;
-	return (__force s3c_gpio_pull_t)pup;
-}
-
-#ifdef CONFIG_S3C_GPIO_PULL_S3C2443
-int s3c_gpio_setpull_s3c2443(struct s3c_gpio_chip *chip,
-				unsigned int off, s3c_gpio_pull_t pull)
-{
-	switch (pull) {
-	case S3C_GPIO_PULL_NONE:
-		pull = 0x01;
-		break;
-	case S3C_GPIO_PULL_UP:
-		pull = 0x00;
-		break;
-	case S3C_GPIO_PULL_DOWN:
-		pull = 0x02;
-		break;
-	}
-	return s3c_gpio_setpull_updown(chip, off, pull);
-}
-
-s3c_gpio_pull_t s3c_gpio_getpull_s3c2443(struct s3c_gpio_chip *chip,
-					unsigned int off)
-{
-	s3c_gpio_pull_t pull;
-
-	pull = s3c_gpio_getpull_updown(chip, off);
-
-	switch (pull) {
-	case 0x00:
-		pull = S3C_GPIO_PULL_UP;
-		break;
-	case 0x01:
-	case 0x03:
-		pull = S3C_GPIO_PULL_NONE;
-		break;
-	case 0x02:
-		pull = S3C_GPIO_PULL_DOWN;
-		break;
-	}
-
-	return pull;
-}
-#endif
-#endif
-
-#if defined(CONFIG_S3C_GPIO_PULL_UP) || defined(CONFIG_S3C_GPIO_PULL_DOWN)
-static int s3c_gpio_setpull_1(struct s3c_gpio_chip *chip,
-			 unsigned int off, s3c_gpio_pull_t pull,
-			 s3c_gpio_pull_t updown)
-{
-	void __iomem *reg = chip->base + 0x08;
-	u32 pup = __raw_readl(reg);
-
-	if (pull == updown)
-		pup &= ~(1 << off);
-	else if (pull == S3C_GPIO_PULL_NONE)
-		pup |= (1 << off);
-	else
-		return -EINVAL;
-
-	__raw_writel(pup, reg);
-	return 0;
-}
-
-static s3c_gpio_pull_t s3c_gpio_getpull_1(struct s3c_gpio_chip *chip,
-				     unsigned int off, s3c_gpio_pull_t updown)
-{
-	void __iomem *reg = chip->base + 0x08;
-	u32 pup = __raw_readl(reg);
-
-	pup &= (1 << off);
-	return pup ? S3C_GPIO_PULL_NONE : updown;
-}
-#endif /* CONFIG_S3C_GPIO_PULL_UP || CONFIG_S3C_GPIO_PULL_DOWN */
-
-#ifdef CONFIG_S3C_GPIO_PULL_UP
-s3c_gpio_pull_t s3c_gpio_getpull_1up(struct s3c_gpio_chip *chip,
-				     unsigned int off)
-{
-	return s3c_gpio_getpull_1(chip, off, S3C_GPIO_PULL_UP);
-}
-
-int s3c_gpio_setpull_1up(struct s3c_gpio_chip *chip,
-			 unsigned int off, s3c_gpio_pull_t pull)
-{
-	return s3c_gpio_setpull_1(chip, off, pull, S3C_GPIO_PULL_UP);
-}
-#endif /* CONFIG_S3C_GPIO_PULL_UP */
-
-#ifdef CONFIG_S3C_GPIO_PULL_DOWN
-s3c_gpio_pull_t s3c_gpio_getpull_1down(struct s3c_gpio_chip *chip,
-				     unsigned int off)
-{
-	return s3c_gpio_getpull_1(chip, off, S3C_GPIO_PULL_DOWN);
-}
-
-int s3c_gpio_setpull_1down(struct s3c_gpio_chip *chip,
-			 unsigned int off, s3c_gpio_pull_t pull)
-{
-	return s3c_gpio_setpull_1(chip, off, pull, S3C_GPIO_PULL_DOWN);
-}
-#endif /* CONFIG_S3C_GPIO_PULL_DOWN */
-
-#ifdef CONFIG_S5P_GPIO_DRVSTR
-s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin)
-{
-	struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
-	unsigned int off;
-	void __iomem *reg;
-	int shift;
-	u32 drvstr;
-
-	if (!chip)
-		return -EINVAL;
-
-	off = pin - chip->chip.base;
-	shift = off * 2;
-	reg = chip->base + 0x0C;
-
-	drvstr = __raw_readl(reg);
-	drvstr = drvstr >> shift;
-	drvstr &= 0x3;
-
-	return (__force s5p_gpio_drvstr_t)drvstr;
-}
-EXPORT_SYMBOL(s5p_gpio_get_drvstr);
-
-int s5p_gpio_set_drvstr(unsigned int pin, s5p_gpio_drvstr_t drvstr)
-{
-	struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
-	unsigned int off;
-	void __iomem *reg;
-	int shift;
-	u32 tmp;
-
-	if (!chip)
-		return -EINVAL;
-
-	off = pin - chip->chip.base;
-	shift = off * 2;
-	reg = chip->base + 0x0C;
-
-	tmp = __raw_readl(reg);
-	tmp &= ~(0x3 << shift);
-	tmp |= drvstr << shift;
-
-	__raw_writel(tmp, reg);
-
-	return 0;
-}
-EXPORT_SYMBOL(s5p_gpio_set_drvstr);
-#endif	/* CONFIG_S5P_GPIO_DRVSTR */

arch/arm/plat-samsung/gpio.c

@@ -1,167 +0,0 @@
-/* linux/arch/arm/plat-s3c/gpio.c
- *
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C series GPIO core
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/spinlock.h>
-
-#include <plat/gpio-core.h>
-
-#ifdef CONFIG_S3C_GPIO_TRACK
-struct s3c_gpio_chip *s3c_gpios[S3C_GPIO_END];
-
-static __init void s3c_gpiolib_track(struct s3c_gpio_chip *chip)
-{
-	unsigned int gpn;
-	int i;
-
-	gpn = chip->chip.base;
-	for (i = 0; i < chip->chip.ngpio; i++, gpn++) {
-		BUG_ON(gpn >= ARRAY_SIZE(s3c_gpios));
-		s3c_gpios[gpn] = chip;
-	}
-}
-#endif /* CONFIG_S3C_GPIO_TRACK */
-
-/* Default routines for controlling GPIO, based on the original S3C24XX
- * GPIO functions which deal with the case where each gpio bank of the
- * chip is as following:
- *
- * base + 0x00: Control register, 2 bits per gpio
- *	        gpio n: 2 bits starting at (2*n)
- *		00 = input, 01 = output, others mean special-function
- * base + 0x04: Data register, 1 bit per gpio
- *		bit n: data bit n
-*/
-
-static int s3c_gpiolib_input(struct gpio_chip *chip, unsigned offset)
-{
-	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
-	void __iomem *base = ourchip->base;
-	unsigned long flags;
-	unsigned long con;
-
-	s3c_gpio_lock(ourchip, flags);
-
-	con = __raw_readl(base + 0x00);
-	con &= ~(3 << (offset * 2));
-
-	__raw_writel(con, base + 0x00);
-
-	s3c_gpio_unlock(ourchip, flags);
-	return 0;
-}
-
-static int s3c_gpiolib_output(struct gpio_chip *chip,
-			      unsigned offset, int value)
-{
-	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
-	void __iomem *base = ourchip->base;
-	unsigned long flags;
-	unsigned long dat;
-	unsigned long con;
-
-	s3c_gpio_lock(ourchip, flags);
-
-	dat = __raw_readl(base + 0x04);
-	dat &= ~(1 << offset);
-	if (value)
-		dat |= 1 << offset;
-	__raw_writel(dat, base + 0x04);
-
-	con = __raw_readl(base + 0x00);
-	con &= ~(3 << (offset * 2));
-	con |= 1 << (offset * 2);
-
-	__raw_writel(con, base + 0x00);
-	__raw_writel(dat, base + 0x04);
-
-	s3c_gpio_unlock(ourchip, flags);
-	return 0;
-}
-
-static void s3c_gpiolib_set(struct gpio_chip *chip,
-			    unsigned offset, int value)
-{
-	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
-	void __iomem *base = ourchip->base;
-	unsigned long flags;
-	unsigned long dat;
-
-	s3c_gpio_lock(ourchip, flags);
-
-	dat = __raw_readl(base + 0x04);
-	dat &= ~(1 << offset);
-	if (value)
-		dat |= 1 << offset;
-	__raw_writel(dat, base + 0x04);
-
-	s3c_gpio_unlock(ourchip, flags);
-}
-
-static int s3c_gpiolib_get(struct gpio_chip *chip, unsigned offset)
-{
-	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
-	unsigned long val;
-
-	val = __raw_readl(ourchip->base + 0x04);
-	val >>= offset;
-	val &= 1;
-
-	return val;
-}
-
-__init void s3c_gpiolib_add(struct s3c_gpio_chip *chip)
-{
-	struct gpio_chip *gc = &chip->chip;
-	int ret;
-
-	BUG_ON(!chip->base);
-	BUG_ON(!gc->label);
-	BUG_ON(!gc->ngpio);
-
-	spin_lock_init(&chip->lock);
-
-	if (!gc->direction_input)
-		gc->direction_input = s3c_gpiolib_input;
-	if (!gc->direction_output)
-		gc->direction_output = s3c_gpiolib_output;
-	if (!gc->set)
-		gc->set = s3c_gpiolib_set;
-	if (!gc->get)
-		gc->get = s3c_gpiolib_get;
-
-#ifdef CONFIG_PM
-	if (chip->pm != NULL) {
-		if (!chip->pm->save || !chip->pm->resume)
-			printk(KERN_ERR "gpio: %s has missing PM functions\n",
-			       gc->label);
-	} else
-		printk(KERN_ERR "gpio: %s has no PM function\n", gc->label);
-#endif
-
-	/* gpiochip_add() prints own failure message on error. */
-	ret = gpiochip_add(gc);
-	if (ret >= 0)
-		s3c_gpiolib_track(chip);
-}
-
-int samsung_gpiolib_to_irq(struct gpio_chip *chip, unsigned int offset)
-{
-	struct s3c_gpio_chip *s3c_chip = container_of(chip,
-			struct s3c_gpio_chip, chip);
-
-	return s3c_chip->irq_base + offset;
-}

arch/arm/plat-samsung/include/plat/devs.h

@@ -62,6 +62,7 @@ extern struct platform_device s3c_device_i2c4;
 extern struct platform_device s3c_device_i2c5;
 extern struct platform_device s3c_device_i2c6;
 extern struct platform_device s3c_device_i2c7;
+extern struct platform_device s5p_device_i2c_hdmiphy;
 extern struct platform_device s3c_device_rtc;
 extern struct platform_device s3c_device_adc;
 extern struct platform_device s3c_device_sdi;
@@ -142,6 +143,11 @@ extern struct platform_device s5p_device_fimc3;
 extern struct platform_device s5p_device_mfc;
 extern struct platform_device s5p_device_mfc_l;
 extern struct platform_device s5p_device_mfc_r;
+
+extern struct platform_device s5p_device_hdmi;
+extern struct platform_device s5p_device_mixer;
+extern struct platform_device s5p_device_sdo;
+
 extern struct platform_device s5p_device_mipi_csis0;
 extern struct platform_device s5p_device_mipi_csis1;
 

arch/arm/plat-samsung/include/plat/dma-ops.h

@@ -0,0 +1,63 @@
+/* arch/arm/plat-samsung/include/plat/dma-ops.h
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Samsung DMA support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __SAMSUNG_DMA_OPS_H_
+#define __SAMSUNG_DMA_OPS_H_ __FILE__
+
+#include <linux/dmaengine.h>
+
+struct samsung_dma_prep_info {
+	enum dma_transaction_type cap;
+	enum dma_data_direction direction;
+	dma_addr_t buf;
+	unsigned long period;
+	unsigned long len;
+	void (*fp)(void *data);
+	void *fp_param;
+};
+
+struct samsung_dma_info {
+	enum dma_transaction_type cap;
+	enum dma_data_direction direction;
+	enum dma_slave_buswidth width;
+	dma_addr_t fifo;
+	struct s3c2410_dma_client *client;
+};
+
+struct samsung_dma_ops {
+	unsigned (*request)(enum dma_ch ch, struct samsung_dma_info *info);
+	int (*release)(unsigned ch, struct s3c2410_dma_client *client);
+	int (*prepare)(unsigned ch, struct samsung_dma_prep_info *info);
+	int (*trigger)(unsigned ch);
+	int (*started)(unsigned ch);
+	int (*flush)(unsigned ch);
+	int (*stop)(unsigned ch);
+};
+
+extern void *samsung_dmadev_get_ops(void);
+extern void *s3c_dma_get_ops(void);
+
+static inline void *__samsung_dma_get_ops(void)
+{
+	if (samsung_dma_is_dmadev())
+		return samsung_dmadev_get_ops();
+	else
+		return s3c_dma_get_ops();
+}
+
+/*
+ * samsung_dma_get_ops
+ * get the set of samsung dma operations
+ */
+#define samsung_dma_get_ops() __samsung_dma_get_ops()
+
+#endif /* __SAMSUNG_DMA_OPS_H_ */

arch/arm/plat-samsung/include/plat/s3c-dma-pl330.h → arch/arm/plat-samsung/include/plat/dma-pl330.h

@@ -8,11 +8,8 @@
  * (at your option) any later version.
  */
 
-#ifndef	__S3C_DMA_PL330_H_
-#define	__S3C_DMA_PL330_H_
-
-#define S3C2410_DMAF_AUTOSTART		(1 << 0)
-#define S3C2410_DMAF_CIRCULAR		(1 << 1)
+#ifndef __DMA_PL330_H_
+#define __DMA_PL330_H_ __FILE__
 
 /*
  * PL330 can assign any channel to communicate with
@@ -20,7 +17,7 @@
  * For the sake of consistency across client drivers,
  * We keep the channel names unchanged and only add
  * missing peripherals are added.
- * Order is not important since S3C PL330 API driver
+ * Order is not important since DMA PL330 API driver
  * use these just as IDs.
  */
 enum dma_ch {
@@ -88,11 +85,20 @@ enum dma_ch {
 	DMACH_MAX,
 };
 
-static inline bool s3c_dma_has_circular(void)
+struct s3c2410_dma_client {
+	char	*name;
+};
+
+static inline bool samsung_dma_has_circular(void)
+{
+	return true;
+}
+
+static inline bool samsung_dma_is_dmadev(void)
 {
 	return true;
 }
 
-#include <plat/dma.h>
+#include <plat/dma-ops.h>
 
-#endif	/* __S3C_DMA_PL330_H_ */
+#endif	/* __DMA_PL330_H_ */

arch/arm/plat-samsung/include/plat/dma-s3c24xx.h

@@ -41,7 +41,7 @@ struct s3c24xx_dma_selection {
 
 	void	(*direction)(struct s3c2410_dma_chan *chan,
 			     struct s3c24xx_dma_map *map,
-			     enum s3c2410_dmasrc dir);
+			     enum dma_data_direction dir);
 };
 
 extern int s3c24xx_dma_init_map(struct s3c24xx_dma_selection *sel);

arch/arm/plat-samsung/include/plat/dma.h

@@ -10,17 +10,14 @@
  * published by the Free Software Foundation.
 */
 
+#include <linux/dma-mapping.h>
+
 enum s3c2410_dma_buffresult {
 	S3C2410_RES_OK,
 	S3C2410_RES_ERR,
 	S3C2410_RES_ABORT
 };
 
-enum s3c2410_dmasrc {
-	S3C2410_DMASRC_HW,		/* source is memory */
-	S3C2410_DMASRC_MEM		/* source is hardware */
-};
-
 /* enum s3c2410_chan_op
  *
  * operation codes passed to the DMA code by the user, and also used
@@ -112,7 +109,7 @@ extern int s3c2410_dma_config(enum dma_ch channel, int xferunit);
 */
 
 extern int s3c2410_dma_devconfig(enum dma_ch channel,
-		enum s3c2410_dmasrc source, unsigned long devaddr);
+		enum dma_data_direction source, unsigned long devaddr);
 
 /* s3c2410_dma_getposition
  *
@@ -126,3 +123,4 @@ extern int s3c2410_dma_set_opfn(enum dma_ch, s3c2410_dma_opfn_t rtn);
 extern int s3c2410_dma_set_buffdone_fn(enum dma_ch, s3c2410_dma_cbfn_t rtn);
 
 
+#include <plat/dma-ops.h>

arch/arm/plat-samsung/include/plat/fb.h

@@ -109,4 +109,11 @@ extern void s5pv210_fb_gpio_setup_24bpp(void);
  */
 extern void exynos4_fimd0_gpio_setup_24bpp(void);
 
+/**
+ * s5p64x0_fb_gpio_setup_24bpp() - S5P6440/S5P6450 setup function for 24bpp LCD
+ *
+ * Initialise the GPIO for an 24bpp LCD display on the RGB interface.
+ */
+extern void s5p64x0_fb_gpio_setup_24bpp(void);
+
 #endif /* __PLAT_S3C_FB_H */