staging: brcm80211: remove osl handle from pkttotlen function

The function pkttotlen was part of osl function and as such was
called with struct osl_info parameter although not used within
the function. As part of remove the whole osl concept from the
drivers this parameter has been removed from the function
prototype.

Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/staging/brcm80211/brcmfmac/dhd_sdio.c

@@ -3309,7 +3309,7 @@ static u8 dhdsdio_rxglom(dhd_bus_t *bus, u8 rxseq)
 		}
 
 		pfirst = bus->glom;
-		dlen = (u16) pkttotlen(osh, pfirst);
+		dlen = (u16) pkttotlen(pfirst);
 
 		/* Do an SDIO read for the superframe.  Configurable iovar to
 		 * read directly into the chained packet, or allocate a large

drivers/staging/brcm80211/brcmsmac/wlc_ampdu.c

@@ -658,7 +658,7 @@ wlc_sendampdu(struct ampdu_info *ampdu, struct wlc_txq_info *qi,
 		len = roundup(len, 4);
 		ampdu_len += (len + (ndelim + 1) * AMPDU_DELIMITER_LEN);
 
-		dma_len += (u16) pkttotlen(osh, p);
+		dma_len += (u16) pkttotlen(p);
 
 		WL_AMPDU_TX("wl%d: wlc_sendampdu: ampdu_len %d seg_cnt %d null delim %d\n",
 			    wlc->pub->unit, ampdu_len, seg_cnt, ndelim);
@@ -755,7 +755,7 @@ wlc_sendampdu(struct ampdu_info *ampdu, struct wlc_txq_info *qi,
 			    ((u8) (p->priority) == tid)) {
 
 				plen =
-				    pkttotlen(osh, p) + AMPDU_MAX_MPDU_OVERHEAD;
+				    pkttotlen(p) + AMPDU_MAX_MPDU_OVERHEAD;
 				plen = max(scb_ampdu->min_len, plen);
 
 				if ((plen + ampdu_len) > maxlen) {

drivers/staging/brcm80211/brcmsmac/wlc_mac80211.c

@@ -5125,7 +5125,7 @@ wlc_prec_enq_head(struct wlc_info *wlc, struct pktq *q, struct sk_buff *pkt,
 				  tx_failed[WME_PRIO2AC(p->priority)].packets);
 			WLCNTADD(wlc->pub->_wme_cnt->
 				 tx_failed[WME_PRIO2AC(p->priority)].bytes,
-				 pkttotlen(wlc->osh, p));
+				 pkttotlen(p));
 		}
 		pkt_buf_free_skb(wlc->osh, p, true);
 		wlc->pub->_cnt->txnobuf++;
@@ -5776,7 +5776,7 @@ wlc_d11hdrs_mac80211(struct wlc_info *wlc, struct ieee80211_hw *hw,
 	       FC_SUBTYPE_ANY_QOS(fc));
 
 	/* compute length of frame in bytes for use in PLCP computations */
-	len = pkttotlen(osh, p);
+	len = pkttotlen(p);
 	phylen = len + FCS_LEN;
 
 	/* If WEP enabled, add room in phylen for the additional bytes of
@@ -6702,7 +6702,7 @@ wlc_dotxstatus(struct wlc_info *wlc, tx_status_t *txs, u32 frm_tx2)
 			tx_info->flags |= IEEE80211_TX_STAT_ACK;
 	}
 
-	totlen = pkttotlen(osh, p);
+	totlen = pkttotlen(p);
 	free_pdu = true;
 
 	wlc_txfifo_complete(wlc, queue, 1);

drivers/staging/brcm80211/include/bcmutils.h

@@ -142,7 +142,7 @@ extern struct sk_buff *pktq_mdeq(struct pktq *pq, uint prec_bmp, int *prec_out);
 /* packet */
 	extern uint pktfrombuf(struct osl_info *osh, struct sk_buff *p,
 			       uint offset, int len, unsigned char *buf);
-	extern uint pkttotlen(struct osl_info *osh, struct sk_buff *p);
+	extern uint pkttotlen(struct sk_buff *p);
 
 /* ethernet address */
 	extern int bcm_ether_atoe(char *p, u8 *ea);

drivers/staging/brcm80211/util/bcmutils.c

@@ -104,7 +104,7 @@ uint pktfrombuf(struct osl_info *osh, struct sk_buff *p, uint offset, int len,
 	return ret;
 }
 /* return total length of buffer chain */
-uint BCMFASTPATH pkttotlen(struct osl_info *osh, struct sk_buff *p)
+uint BCMFASTPATH pkttotlen(struct sk_buff *p)
 {
 	uint total;