Merge tag 'ux500-dt-for-v3.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into next/dt

From Linus Walleij:
Five incremental device tree patches around the clock handling,
and adding SSP/SPI devices to the device tree.

* tag 'ux500-dt-for-v3.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
  ARM: ux500: register all SSP and SPI blocks
  ARM: ux500: fix I2C4 clock bit
  ARM: ux500: fix clock for GPIO blocks 6 and 7
  clk: ux500: fix erroneous bit assignment
  ARM: ux500: fix clock for GPIO block 8

Signed-off-by: Olof Johansson <olof@lixom.net>

arch/arm/boot/dts/ste-dbx5x0.dtsi

@@ -197,7 +197,7 @@
 			#gpio-cells = <2>;
 			gpio-bank = <6>;
 
-			clocks = <&prcc_pclk 2 1>;
+			clocks = <&prcc_pclk 2 11>;
 		};
 
 		gpio7: gpio@8011e080 {
@@ -212,7 +212,7 @@
 			#gpio-cells = <2>;
 			gpio-bank = <7>;
 
-			clocks = <&prcc_pclk 2 1>;
+			clocks = <&prcc_pclk 2 11>;
 		};
 
 		gpio8: gpio@a03fe000 {
@@ -227,7 +227,7 @@
 			#gpio-cells = <2>;
 			gpio-bank = <8>;
 
-			clocks = <&prcc_pclk 6 1>;
+			clocks = <&prcc_pclk 5 1>;
 		};
 
 		pinctrl {
@@ -694,7 +694,7 @@
 
 			clock-frequency = <400000>;
 
-			clocks = <&prcc_kclk 1 9>, <&prcc_pclk 1 9>;
+			clocks = <&prcc_kclk 1 9>, <&prcc_pclk 1 10>;
 			clock-names = "i2cclk", "apb_pclk";
 		};
 
@@ -704,7 +704,80 @@
 			interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			status = "disabled";
+			clocks = <&prcc_kclk 3 1>, <&prcc_pclk 3 1>;
+			clock-names = "ssp0clk", "apb_pclk";
+			dmas = <&dma 8 0 0x2>, /* Logical - DevToMem */
+			       <&dma 8 0 0x0>; /* Logical - MemToDev */
+			dma-names = "rx", "tx";
+		};
+
+		ssp@80003000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x80003000 0x1000>;
+			interrupts = <0 52 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&prcc_kclk 3 2>, <&prcc_pclk 3 2>;
+			clock-names = "ssp1clk", "apb_pclk";
+			dmas = <&dma 9 0 0x2>, /* Logical - DevToMem */
+			       <&dma 9 0 0x0>; /* Logical - MemToDev */
+			dma-names = "rx", "tx";
+		};
+
+		spi@8011a000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x8011a000 0x1000>;
+			interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			/* Same clock wired to kernel and pclk */
+			clocks = <&prcc_pclk 2 8>, <&prcc_pclk 2 8>;
+			clock-names = "spi0clk", "apb_pclk";
+			dmas = <&dma 0 0 0x2>, /* Logical - DevToMem */
+			       <&dma 0 0 0x0>; /* Logical - MemToDev */
+			dma-names = "rx", "tx";
+		};
+
+		spi@80112000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x80112000 0x1000>;
+			interrupts = <0 96 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			/* Same clock wired to kernel and pclk */
+			clocks = <&prcc_pclk 2 2>, <&prcc_pclk 2 2>;
+			clock-names = "spi1clk", "apb_pclk";
+			dmas = <&dma 35 0 0x2>, /* Logical - DevToMem */
+			       <&dma 35 0 0x0>; /* Logical - MemToDev */
+			dma-names = "rx", "tx";
+		};
+
+		spi@80111000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x80111000 0x1000>;
+			interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			/* Same clock wired to kernel and pclk */
+			clocks = <&prcc_pclk 2 1>, <&prcc_pclk 2 1>;
+			clock-names = "spi2clk", "apb_pclk";
+			dmas = <&dma 33 0 0x2>, /* Logical - DevToMem */
+			       <&dma 33 0 0x0>; /* Logical - MemToDev */
+			dma-names = "rx", "tx";
+		};
+
+		spi@80129000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x80129000 0x1000>;
+			interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			/* Same clock wired to kernel and pclk */
+			clocks = <&prcc_pclk 1 7>, <&prcc_pclk 1 7>;
+			clock-names = "spi3clk", "apb_pclk";
+			dmas = <&dma 40 0 0x2>, /* Logical - DevToMem */
+			       <&dma 40 0 0x0>; /* Logical - MemToDev */
+			dma-names = "rx", "tx";
 		};
 
 		uart@80120000 {

drivers/clk/ux500/u8500_of_clk.c

@@ -339,7 +339,7 @@ void u8500_of_clk_init(u32 clkrst1_base, u32 clkrst2_base, u32 clkrst3_base,
 
 	clk = clk_reg_prcc_pclk("p2_pclk11", "per2clk", clkrst2_base,
 				BIT(11), 0);
-	PRCC_PCLK_STORE(clk, 2, 1);
+	PRCC_PCLK_STORE(clk, 2, 11);
 
 	clk = clk_reg_prcc_pclk("p2_pclk12", "per2clk", clkrst2_base,
 				BIT(12), 0);