Merge tag 'omap-for-v3.8/cleanup-timer-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/cleanup

Timer clean-up to get us closer to moving timer code to drivers,
and to get rid of CONFIG_OMAP_32K_TIMER and rely on the board
or devicetree provided timer configuration.

Note that these changes are on top of the recent timer fixes.

By Jon Hunter (32) and others
via Tony Lindgren
* tag 'omap-for-v3.8/cleanup-timer-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (71 commits)
  ARM: OMAP3: cm-t3517: use GPTIMER for system clock
  ARM: OMAP2+: timer: remove CONFIG_OMAP_32K_TIMER
  ARM: OMAP2+: Fix compiler warning for 32k timer
  ARM: OMAP: Remove unnecessary inclusion of dmtimer.h
  ARM: OMAP: Add platform data header for DMTIMERs
  ARM: OMAP: Remove unnecessary omap_dm_timer structure declaration
  ARM: OMAP2+: Remove unnecessary local variable in timer code
  ARM: OMAP: Don't store timers physical address
  ARM: OMAP: Define omap_dm_timer_prepare function as static
  ARM: OMAP: Clean-up dmtimer reset code
  ARM: OMAP: Remove __omap_dm_timer_set_source function
  ARM: OMAP: Remove unnecessary call to clk_get()
  ARM: OMAP: Add dmtimer interrupt disable function
  ARM: OMAP: Fix spurious interrupts when using timer match feature
  ARM: OMAP: Don't restore DMTIMER interrupt status register
  ARM: OMAP: Don't restore of DMTIMER TISTAT register
  ARM: OMAP: Fix dmtimer reset for timer1
  ARM: OMAP2+: Don't use __omap_dm_timer_reset()
  ARM: OMAP2/3: Define HWMOD software reset status for DMTIMERs
  ARM: OMAP3: Correct HWMOD DMTIMER SYSC register declarations
  ...

Change/change conflict in arch/arm/mach-omap2/board-cm-t3517.c.

Signed-off-by: Olof Johansson <olof@lixom.net>

Documentation/devicetree/bindings/arm/omap/counter.txt

@@ -0,0 +1,15 @@
+OMAP Counter-32K bindings
+
+Required properties:
+- compatible:	Must be "ti,omap-counter32k" for OMAP controllers
+- reg:		Contains timer register address range (base address and length)
+- ti,hwmods:	Name of the hwmod associated to the counter, which is typically
+		"counter_32k"
+
+Example:
+
+counter32k: counter@4a304000 {
+	compatible = "ti,omap-counter32k";
+	reg = <0x4a304000 0x20>;
+	ti,hwmods = "counter_32k";
+};

Documentation/devicetree/bindings/arm/omap/timer.txt

@@ -0,0 +1,31 @@
+OMAP Timer bindings
+
+Required properties:
+- compatible:		Must be "ti,omap2-timer" for OMAP2+ controllers.
+- reg:			Contains timer register address range (base address and
+			length).
+- interrupts: 		Contains the interrupt information for the timer. The
+			format is being dependent on which interrupt controller
+			the OMAP device uses.
+- ti,hwmods:		Name of the hwmod associated to the timer, "timer<X>",
+			where <X> is the instance number of the timer from the
+			HW spec.
+
+Optional properties:
+- ti,timer-alwon:	Indicates the timer is in an alway-on power domain.
+- ti,timer-dsp:		Indicates the timer can interrupt the on-chip DSP in
+			addition to the ARM CPU.
+- ti,timer-pwm: 	Indicates the timer can generate a PWM output.
+- ti,timer-secure: 	Indicates the timer is reserved on a secure OMAP device
+			and therefore cannot be used by the kernel.
+
+Example:
+
+timer12: timer@48304000 {
+	compatible = "ti,omap2-timer";
+	reg = <0x48304000 0x400>;
+	interrupts = <95>;
+	ti,hwmods = "timer12"
+	ti,timer-alwon;
+	ti,timer-secure;
+};

Documentation/devicetree/bindings/bus/omap-ocp2scp.txt

@@ -2,9 +2,27 @@
 
 properties:
 - compatible : Should be "ti,omap-ocp2scp"
+- reg : Address and length of the register set for the device
 - #address-cells, #size-cells : Must be present if the device has sub-nodes
 - ranges : the child address space are mapped 1:1 onto the parent address space
 - ti,hwmods : must be "ocp2scp_usb_phy"
 
 Sub-nodes:
 All the devices connected to ocp2scp are described using sub-node to ocp2scp
+
+ocp2scp@4a0ad000 {
+	compatible = "ti,omap-ocp2scp";
+	reg = <0x4a0ad000 0x1f>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges;
+	ti,hwmods = "ocp2scp_usb_phy";
+
+	subnode1 {
+	...
+	};
+
+	subnode2 {
+	...
+	};
+};

Documentation/devicetree/bindings/i2c/trivial-devices.txt

@@ -55,5 +55,7 @@ st-micro,24c256		i2c serial eeprom  (24cxx)
 stm,m41t00		Serial Access TIMEKEEPER
 stm,m41t62		Serial real-time clock (RTC) with alarm
 stm,m41t80		M41T80 - SERIAL ACCESS RTC WITH ALARMS
+taos,tsl2550		Ambient Light Sensor with SMBUS/Two Wire Serial Interface
 ti,tsc2003		I2C Touch-Screen Controller
 ti,tmp102		Low Power Digital Temperature Sensor with SMBUS/Two Wire Serial Interface
+ti,tmp275		Digital Temperature Sensor

Documentation/devicetree/bindings/usb/am33xx-usb.txt

@@ -1,5 +1,7 @@
 AM33XX MUSB GLUE
  - compatible : Should be "ti,musb-am33xx"
+ - reg : offset and length of register sets, first usbss, then for musb instances
+ - interrupts : usbss, musb instance interrupts in order
  - ti,hwmods : must be "usb_otg_hs"
  - multipoint : Should be "1" indicating the musb controller supports
    multipoint. This is a MUSB configuration-specific setting.
@@ -12,3 +14,22 @@ AM33XX MUSB GLUE
    represents PERIPHERAL.
  - power : Should be "250". This signifies the controller can supply upto
    500mA when operating in host mode.
+
+Example:
+
+usb@47400000  {
+	compatible = "ti,musb-am33xx";
+	reg = <0x47400000 0x1000	/* usbss */
+	       0x47401000 0x800		/* musb instance 0 */
+	       0x47401800 0x800>;	/* musb instance 1 */
+	interrupts = <17		/* usbss */
+		      18		/* musb instance 0 */
+		      19>;		/* musb instance 1 */
+	multipoint = <1>;
+	num-eps = <16>;
+	ram-bits = <12>;
+	port0-mode = <3>;
+	port1-mode = <3>;
+	power = <250>;
+	ti,hwmods = "usb_otg_hs";
+};

arch/arm/boot/dts/Makefile

@@ -63,15 +63,17 @@ dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \
 	imx28-m28evk.dtb \
 	imx28-tx28.dtb
 dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
+	omap3-beagle.dtb \
 	omap3-beagle-xm.dtb \
 	omap3-evm.dtb \
 	omap3-tobi.dtb \
 	omap4-panda.dtb \
-	omap4-pandaES.dtb \
-	omap4-var_som.dtb \
+	omap4-panda-es.dtb \
+	omap4-var-som.dtb \
 	omap4-sdp.dtb \
 	omap5-evm.dtb \
 	am335x-evm.dtb \
+	am335x-evmsk.dtb \
 	am335x-bone.dtb
 dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb
 dtb-$(CONFIG_ARCH_U8500) += snowball.dtb

arch/arm/boot/dts/am335x-bone.dts

@@ -13,11 +13,31 @@
 	model = "TI AM335x BeagleBone";
 	compatible = "ti,am335x-bone", "ti,am33xx";
 
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&dcdc2_reg>;
+		};
+	};
+
 	memory {
 		device_type = "memory";
 		reg = <0x80000000 0x10000000>; /* 256 MB */
 	};
 
+	am33xx_pinmux: pinmux@44e10800 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&user_leds_s0>;
+
+		user_leds_s0: user_leds_s0 {
+			pinctrl-single,pins = <
+				0x54 0x7	/* gpmc_a5.gpio1_21, OUTPUT | MODE7 */
+				0x58 0x17	/* gpmc_a6.gpio1_22, OUTPUT_PULLUP | MODE7 */
+				0x5c 0x7	/* gpmc_a7.gpio1_23, OUTPUT | MODE7 */
+				0x60 0x17	/* gpmc_a8.gpio1_24, OUTPUT_PULLUP | MODE7 */
+			>;
+		};
+	};
+
 	ocp {
 		uart1: serial@44e09000 {
 			status = "okay";
@@ -33,6 +53,36 @@
 
 		};
 	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led@2 {
+			label = "beaglebone:green:heartbeat";
+			gpios = <&gpio2 21 0>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+
+		led@3 {
+			label = "beaglebone:green:mmc0";
+			gpios = <&gpio2 22 0>;
+			linux,default-trigger = "mmc0";
+			default-state = "off";
+		};
+
+		led@4 {
+			label = "beaglebone:green:usr2";
+			gpios = <&gpio2 23 0>;
+			default-state = "off";
+		};
+
+		led@5 {
+			label = "beaglebone:green:usr3";
+			gpios = <&gpio2 24 0>;
+			default-state = "off";
+		};
+	};
 };
 
 /include/ "tps65217.dtsi"

arch/arm/boot/dts/am335x-evm.dts

@@ -13,11 +13,39 @@
 	model = "TI AM335x EVM";
 	compatible = "ti,am335x-evm", "ti,am33xx";
 
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&vdd1_reg>;
+		};
+	};
+
 	memory {
 		device_type = "memory";
 		reg = <0x80000000 0x10000000>; /* 256 MB */
 	};
 
+	am33xx_pinmux: pinmux@44e10800 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&matrix_keypad_s0 &volume_keys_s0>;
+
+		matrix_keypad_s0: matrix_keypad_s0 {
+			pinctrl-single,pins = <
+				0x54 0x7	/* gpmc_a5.gpio1_21, OUTPUT | MODE7 */
+				0x58 0x7	/* gpmc_a6.gpio1_22, OUTPUT | MODE7 */
+				0x64 0x27	/* gpmc_a9.gpio1_25, INPUT | MODE7 */
+				0x68 0x27	/* gpmc_a10.gpio1_26, INPUT | MODE7 */
+				0x6c 0x27	/* gpmc_a11.gpio1_27, INPUT | MODE7 */
+			>;
+		};
+
+		volume_keys_s0: volume_keys_s0 {
+			pinctrl-single,pins = <
+				0x150 0x27	/* spi0_sclk.gpio0_2, INPUT | MODE7 */
+				0x154 0x27	/* spi0_d0.gpio0_3, INPUT | MODE7 */
+			>;
+		};
+	};
+
 	ocp {
 		uart1: serial@44e09000 {
 			status = "okay";
@@ -31,6 +59,49 @@
 				reg = <0x2d>;
 			};
 		};
+
+		i2c2: i2c@4802a000 {
+			status = "okay";
+			clock-frequency = <100000>;
+
+			lis331dlh: lis331dlh@18 {
+				compatible = "st,lis331dlh", "st,lis3lv02d";
+				reg = <0x18>;
+				Vdd-supply = <&lis3_reg>;
+				Vdd_IO-supply = <&lis3_reg>;
+
+				st,click-single-x;
+				st,click-single-y;
+				st,click-single-z;
+				st,click-thresh-x = <10>;
+				st,click-thresh-y = <10>;
+				st,click-thresh-z = <10>;
+				st,irq1-click;
+				st,irq2-click;
+				st,wakeup-x-lo;
+				st,wakeup-x-hi;
+				st,wakeup-y-lo;
+				st,wakeup-y-hi;
+				st,wakeup-z-lo;
+				st,wakeup-z-hi;
+				st,min-limit-x = <120>;
+				st,min-limit-y = <120>;
+				st,min-limit-z = <140>;
+				st,max-limit-x = <550>;
+				st,max-limit-y = <550>;
+				st,max-limit-z = <750>;
+			};
+
+			tsl2550: tsl2550@39 {
+				compatible = "taos,tsl2550";
+				reg = <0x39>;
+			};
+
+			tmp275: tmp275@48 {
+				compatible = "ti,tmp275";
+				reg = <0x48>;
+			};
+		};
 	};
 
 	vbat: fixedregulator@0 {
@@ -40,6 +111,53 @@
 		regulator-max-microvolt = <5000000>;
 		regulator-boot-on;
 	};
+
+	lis3_reg: fixedregulator@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "lis3_reg";
+		regulator-boot-on;
+	};
+
+	matrix_keypad: matrix_keypad@0 {
+		compatible = "gpio-matrix-keypad";
+		debounce-delay-ms = <5>;
+		col-scan-delay-us = <2>;
+
+		row-gpios = <&gpio2 25 0	/* Bank1, pin25 */
+			     &gpio2 26 0	/* Bank1, pin26 */
+			     &gpio2 27 0>;	/* Bank1, pin27 */
+
+		col-gpios = <&gpio2 21 0	/* Bank1, pin21 */
+			     &gpio2 22 0>;	/* Bank1, pin22 */
+
+		linux,keymap = <0x0000008b	/* MENU */
+				0x0100009e	/* BACK */
+				0x02000069	/* LEFT */
+				0x0001006a	/* RIGHT */
+				0x0101001c	/* ENTER */
+				0x0201006c>;	/* DOWN */
+	};
+
+	gpio_keys: volume_keys@0 {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		autorepeat;
+
+		switch@9 {
+			label = "volume-up";
+			linux,code = <115>;
+			gpios = <&gpio1 2 1>;
+			gpio-key,wakeup;
+		};
+
+		switch@10 {
+			label = "volume-down";
+			linux,code = <114>;
+			gpios = <&gpio1 3 1>;
+			gpio-key,wakeup;
+		};
+	};
 };
 
 /include/ "tps65910.dtsi"

arch/arm/boot/dts/am335x-evmsk.dts

@@ -0,0 +1,250 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * AM335x Starter Kit
+ * http://www.ti.com/tool/tmdssk3358
+ */
+
+/dts-v1/;
+
+/include/ "am33xx.dtsi"
+
+/ {
+	model = "TI AM335x EVM-SK";
+	compatible = "ti,am335x-evmsk", "ti,am33xx";
+
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&vdd1_reg>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256 MB */
+	};
+
+	am33xx_pinmux: pinmux@44e10800 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&user_leds_s0 &gpio_keys_s0>;
+
+		user_leds_s0: user_leds_s0 {
+			pinctrl-single,pins = <
+				0x10 0x7	/* gpmc_ad4.gpio1_4, OUTPUT | MODE7 */
+				0x14 0x7	/* gpmc_ad5.gpio1_5, OUTPUT | MODE7 */
+				0x18 0x7	/* gpmc_ad6.gpio1_6, OUTPUT | MODE7 */
+				0x1c 0x7	/* gpmc_ad7.gpio1_7, OUTPUT | MODE7 */
+			>;
+		};
+
+		gpio_keys_s0: gpio_keys_s0 {
+			pinctrl-single,pins = <
+				0x94 0x27	/* gpmc_oen_ren.gpio2_3, INPUT | MODE7 */
+				0x90 0x27	/* gpmc_advn_ale.gpio2_2, INPUT | MODE7 */
+				0x70 0x27	/* gpmc_wait0.gpio0_30, INPUT | MODE7 */
+				0x9c 0x27	/* gpmc_ben0_cle.gpio2_5, INPUT | MODE7 */
+			>;
+		};
+	};
+
+	ocp {
+		uart1: serial@44e09000 {
+			status = "okay";
+		};
+
+		i2c1: i2c@44e0b000 {
+			status = "okay";
+			clock-frequency = <400000>;
+
+			tps: tps@2d {
+				reg = <0x2d>;
+			};
+
+			lis331dlh: lis331dlh@18 {
+				compatible = "st,lis331dlh", "st,lis3lv02d";
+				reg = <0x18>;
+				Vdd-supply = <&lis3_reg>;
+				Vdd_IO-supply = <&lis3_reg>;
+
+				st,click-single-x;
+				st,click-single-y;
+				st,click-single-z;
+				st,click-thresh-x = <10>;
+				st,click-thresh-y = <10>;
+				st,click-thresh-z = <10>;
+				st,irq1-click;
+				st,irq2-click;
+				st,wakeup-x-lo;
+				st,wakeup-x-hi;
+				st,wakeup-y-lo;
+				st,wakeup-y-hi;
+				st,wakeup-z-lo;
+				st,wakeup-z-hi;
+				st,min-limit-x = <120>;
+				st,min-limit-y = <120>;
+				st,min-limit-z = <140>;
+				st,max-limit-x = <550>;
+				st,max-limit-y = <550>;
+				st,max-limit-z = <750>;
+			};
+		};
+	};
+
+	vbat: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbat";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+	};
+
+	lis3_reg: fixedregulator@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "lis3_reg";
+		regulator-boot-on;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led@1 {
+			label = "evmsk:green:usr0";
+			gpios = <&gpio2 4 0>;
+			default-state = "off";
+		};
+
+		led@2 {
+			label = "evmsk:green:usr1";
+			gpios = <&gpio2 5 0>;
+			default-state = "off";
+		};
+
+		led@3 {
+			label = "evmsk:green:mmc0";
+			gpios = <&gpio2 6 0>;
+			linux,default-trigger = "mmc0";
+			default-state = "off";
+		};
+
+		led@4 {
+			label = "evmsk:green:heartbeat";
+			gpios = <&gpio2 7 0>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+	};
+
+	gpio_buttons: gpio_buttons@0 {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		switch@1 {
+			label = "button0";
+			linux,code = <0x100>;
+			gpios = <&gpio3 3 0>;
+		};
+
+		switch@2 {
+			label = "button1";
+			linux,code = <0x101>;
+			gpios = <&gpio3 2 0>;
+		};
+
+		switch@3 {
+			label = "button2";
+			linux,code = <0x102>;
+			gpios = <&gpio1 30 0>;
+			gpio-key,wakeup;
+		};
+
+		switch@4 {
+			label = "button3";
+			linux,code = <0x103>;
+			gpios = <&gpio3 5 0>;
+		};
+	};
+};
+
+/include/ "tps65910.dtsi"
+
+&tps {
+	vcc1-supply = <&vbat>;
+	vcc2-supply = <&vbat>;
+	vcc3-supply = <&vbat>;
+	vcc4-supply = <&vbat>;
+	vcc5-supply = <&vbat>;
+	vcc6-supply = <&vbat>;
+	vcc7-supply = <&vbat>;
+	vccio-supply = <&vbat>;
+
+	regulators {
+		vrtc_reg: regulator@0 {
+			regulator-always-on;
+		};
+
+		vio_reg: regulator@1 {
+			regulator-always-on;
+		};
+
+		vdd1_reg: regulator@2 {
+			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
+			regulator-name = "vdd_mpu";
+			regulator-min-microvolt = <912500>;
+			regulator-max-microvolt = <1312500>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vdd2_reg: regulator@3 {
+			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
+			regulator-name = "vdd_core";
+			regulator-min-microvolt = <912500>;
+			regulator-max-microvolt = <1150000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vdd3_reg: regulator@4 {
+			regulator-always-on;
+		};
+
+		vdig1_reg: regulator@5 {
+			regulator-always-on;
+		};
+
+		vdig2_reg: regulator@6 {
+			regulator-always-on;
+		};
+
+		vpll_reg: regulator@7 {
+			regulator-always-on;
+		};
+
+		vdac_reg: regulator@8 {
+			regulator-always-on;
+		};
+
+		vaux1_reg: regulator@9 {
+			regulator-always-on;
+		};
+
+		vaux2_reg: regulator@10 {
+			regulator-always-on;
+		};
+
+		vaux33_reg: regulator@11 {
+			regulator-always-on;
+		};
+
+		vmmc_reg: regulator@12 {
+			regulator-always-on;
+		};
+	};
+};

arch/arm/boot/dts/am33xx.dtsi

@@ -12,6 +12,7 @@
 
 / {
 	compatible = "ti,am33xx";
+	interrupt-parent = <&intc>;
 
 	aliases {
 		serial0 = &uart1;
@@ -25,6 +26,21 @@
 	cpus {
 		cpu@0 {
 			compatible = "arm,cortex-a8";
+
+			/*
+			 * To consider voltage drop between PMIC and SoC,
+			 * tolerance value is reduced to 2% from 4% and
+			 * voltage value is increased as a precaution.
+			 */
+			operating-points = <
+				/* kHz    uV */
+				720000  1285000
+				600000  1225000
+				500000  1125000
+				275000  1125000
+			>;
+			voltage-tolerance = <2>; /* 2 percentage */
+			clock-latency = <300000>; /* From omap-cpufreq driver */
 		};
 	};
 
@@ -40,6 +56,15 @@
 		};
 	};
 
+	am33xx_pinmux: pinmux@44e10800 {
+		compatible = "pinctrl-single";
+		reg = <0x44e10800 0x0238>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0x7f>;
+	};
+
 	/*
 	 * XXX: Use a flat representation of the AM33XX interconnect.
 	 * The real AM33XX interconnect network is quite complex.Since
@@ -70,7 +95,6 @@
 			interrupt-controller;
 			#interrupt-cells = <1>;
 			reg = <0x44e07000 0x1000>;
-			interrupt-parent = <&intc>;
 			interrupts = <96>;
 		};
 
@@ -82,7 +106,6 @@
 			interrupt-controller;
 			#interrupt-cells = <1>;
 			reg = <0x4804c000 0x1000>;
-			interrupt-parent = <&intc>;
 			interrupts = <98>;
 		};
 
@@ -94,7 +117,6 @@
 			interrupt-controller;
 			#interrupt-cells = <1>;
 			reg = <0x481ac000 0x1000>;
-			interrupt-parent = <&intc>;
 			interrupts = <32>;
 		};
 
@@ -106,7 +128,6 @@
 			interrupt-controller;
 			#interrupt-cells = <1>;
 			reg = <0x481ae000 0x1000>;
-			interrupt-parent = <&intc>;
 			interrupts = <62>;
 		};
 
@@ -115,7 +136,6 @@
 			ti,hwmods = "uart1";
 			clock-frequency = <48000000>;
 			reg = <0x44e09000 0x2000>;
-			interrupt-parent = <&intc>;
 			interrupts = <72>;
 			status = "disabled";
 		};
@@ -125,7 +145,6 @@
 			ti,hwmods = "uart2";
 			clock-frequency = <48000000>;
 			reg = <0x48022000 0x2000>;
-			interrupt-parent = <&intc>;
 			interrupts = <73>;
 			status = "disabled";
 		};
@@ -135,7 +154,6 @@
 			ti,hwmods = "uart3";
 			clock-frequency = <48000000>;
 			reg = <0x48024000 0x2000>;
-			interrupt-parent = <&intc>;
 			interrupts = <74>;
 			status = "disabled";
 		};
@@ -145,7 +163,6 @@
 			ti,hwmods = "uart4";
 			clock-frequency = <48000000>;
 			reg = <0x481a6000 0x2000>;
-			interrupt-parent = <&intc>;
 			interrupts = <44>;
 			status = "disabled";
 		};
@@ -155,7 +172,6 @@
 			ti,hwmods = "uart5";
 			clock-frequency = <48000000>;
 			reg = <0x481a8000 0x2000>;
-			interrupt-parent = <&intc>;
 			interrupts = <45>;
 			status = "disabled";
 		};
@@ -165,7 +181,6 @@
 			ti,hwmods = "uart6";
 			clock-frequency = <48000000>;
 			reg = <0x481aa000 0x2000>;
-			interrupt-parent = <&intc>;
 			interrupts = <46>;
 			status = "disabled";
 		};
@@ -176,7 +191,6 @@
 			#size-cells = <0>;
 			ti,hwmods = "i2c1";
 			reg = <0x44e0b000 0x1000>;
-			interrupt-parent = <&intc>;
 			interrupts = <70>;
 			status = "disabled";
 		};
@@ -187,7 +201,6 @@
 			#size-cells = <0>;
 			ti,hwmods = "i2c2";
 			reg = <0x4802a000 0x1000>;
-			interrupt-parent = <&intc>;
 			interrupts = <71>;
 			status = "disabled";
 		};
@@ -198,7 +211,6 @@
 			#size-cells = <0>;
 			ti,hwmods = "i2c3";
 			reg = <0x4819c000 0x1000>;
-			interrupt-parent = <&intc>;
 			interrupts = <30>;
 			status = "disabled";
 		};
@@ -207,8 +219,124 @@
 			compatible = "ti,omap3-wdt";
 			ti,hwmods = "wd_timer2";
 			reg = <0x44e35000 0x1000>;
-			interrupt-parent = <&intc>;
 			interrupts = <91>;
 		};
+
+		dcan0: d_can@481cc000 {
+			compatible = "bosch,d_can";
+			ti,hwmods = "d_can0";
+			reg = <0x481cc000 0x2000>;
+			interrupts = <52>;
+			status = "disabled";
+		};
+
+		dcan1: d_can@481d0000 {
+			compatible = "bosch,d_can";
+			ti,hwmods = "d_can1";
+			reg = <0x481d0000 0x2000>;
+			interrupts = <55>;
+			status = "disabled";
+		};
+
+		timer1: timer@44e31000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x44e31000 0x400>;
+			interrupts = <67>;
+			ti,hwmods = "timer1";
+			ti,timer-alwon;
+		};
+
+		timer2: timer@48040000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x48040000 0x400>;
+			interrupts = <68>;
+			ti,hwmods = "timer2";
+		};
+
+		timer3: timer@48042000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x48042000 0x400>;
+			interrupts = <69>;
+			ti,hwmods = "timer3";
+		};
+
+		timer4: timer@48044000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x48044000 0x400>;
+			interrupts = <92>;
+			ti,hwmods = "timer4";
+			ti,timer-pwm;
+		};
+
+		timer5: timer@48046000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x48046000 0x400>;
+			interrupts = <93>;
+			ti,hwmods = "timer5";
+			ti,timer-pwm;
+		};
+
+		timer6: timer@48048000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x48048000 0x400>;
+			interrupts = <94>;
+			ti,hwmods = "timer6";
+			ti,timer-pwm;
+		};
+
+		timer7: timer@4804a000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x4804a000 0x400>;
+			interrupts = <95>;
+			ti,hwmods = "timer7";
+			ti,timer-pwm;
+		};
+
+		rtc@44e3e000 {
+			compatible = "ti,da830-rtc";
+			reg = <0x44e3e000 0x1000>;
+			interrupts = <75
+				      76>;
+			ti,hwmods = "rtc";
+		};
+
+		spi0: spi@48030000 {
+			compatible = "ti,omap4-mcspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x48030000 0x400>;
+			interrupt = <65>;
+			ti,spi-num-cs = <2>;
+			ti,hwmods = "spi0";
+			status = "disabled";
+		};
+
+		spi1: spi@481a0000 {
+			compatible = "ti,omap4-mcspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x481a0000 0x400>;
+			interrupt = <125>;
+			ti,spi-num-cs = <2>;
+			ti,hwmods = "spi1";
+			status = "disabled";
+		};
+
+		usb@47400000 {
+			compatible = "ti,musb-am33xx";
+			reg = <0x47400000 0x1000	/* usbss */
+			       0x47401000 0x800		/* musb instance 0 */
+			       0x47401800 0x800>;	/* musb instance 1 */
+			interrupts = <17		/* usbss */
+				      18		/* musb instance 0 */
+				      19>;		/* musb instance 1 */
+			multipoint = <1>;
+			num-eps = <16>;
+			ram-bits = <12>;
+			port0-mode = <3>;
+			port1-mode = <3>;
+			power = <250>;
+			ti,hwmods = "usb_otg_hs";
+		};
 	};
 };

arch/arm/boot/dts/omap2.dtsi

@@ -12,6 +12,7 @@
 
 / {
 	compatible = "ti,omap2430", "ti,omap2420", "ti,omap2";
+	interrupt-parent = <&intc>;
 
 	aliases {
 		serial0 = &uart1;
@@ -65,5 +66,90 @@
 			ti,hwmods = "uart3";
 			clock-frequency = <48000000>;
 		};
+
+		timer2: timer@4802a000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x4802a000 0x400>;
+			interrupts = <38>;
+			ti,hwmods = "timer2";
+		};
+
+		timer3: timer@48078000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x48078000 0x400>;
+			interrupts = <39>;
+			ti,hwmods = "timer3";
+		};
+
+		timer4: timer@4807a000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x4807a000 0x400>;
+			interrupts = <40>;
+			ti,hwmods = "timer4";
+		};
+
+		timer5: timer@4807c000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x4807c000 0x400>;
+			interrupts = <41>;
+			ti,hwmods = "timer5";
+			ti,timer-dsp;
+		};
+
+		timer6: timer@4807e000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x4807e000 0x400>;
+			interrupts = <42>;
+			ti,hwmods = "timer6";
+			ti,timer-dsp;
+		};
+
+		timer7: timer@48080000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x48080000 0x400>;
+			interrupts = <43>;
+			ti,hwmods = "timer7";
+			ti,timer-dsp;
+		};
+
+		timer8: timer@48082000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x48082000 0x400>;
+			interrupts = <44>;
+			ti,hwmods = "timer8";
+			ti,timer-dsp;
+		};
+
+		timer9: timer@48084000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x48084000 0x400>;
+			interrupts = <45>;
+			ti,hwmods = "timer9";
+			ti,timer-pwm;
+		};
+
+		timer10: timer@48086000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x48086000 0x400>;
+			interrupts = <46>;
+			ti,hwmods = "timer10";
+			ti,timer-pwm;
+		};
+
+		timer11: timer@48088000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x48088000 0x400>;
+			interrupts = <47>;
+			ti,hwmods = "timer11";
+			ti,timer-pwm;
+		};
+
+		timer12: timer@4808a000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x4808a000 0x400>;
+			interrupts = <48>;
+			ti,hwmods = "timer12";
+			ti,timer-pwm;
+		};
 	};
 };

arch/arm/boot/dts/omap2420.dtsi

@@ -14,6 +14,12 @@
 	compatible = "ti,omap2420", "ti,omap2";
 
 	ocp {
+		counter32k: counter@48004000 {
+			compatible = "ti,omap-counter32k";
+			reg = <0x48004000 0x20>;
+			ti,hwmods = "counter_32k";
+		};
+
 		omap2420_pmx: pinmux@48000030 {
 			compatible = "ti,omap2420-padconf", "pinctrl-single";
 			reg = <0x48000030 0x0113>;
@@ -30,7 +36,6 @@
 			interrupts = <59>, /* TX interrupt */
 				     <60>; /* RX interrupt */
 			interrupt-names = "tx", "rx";
-			interrupt-parent = <&intc>;
 			ti,hwmods = "mcbsp1";
 		};
 
@@ -41,8 +46,15 @@
 			interrupts = <62>, /* TX interrupt */
 				     <63>; /* RX interrupt */
 			interrupt-names = "tx", "rx";
-			interrupt-parent = <&intc>;
 			ti,hwmods = "mcbsp2";
 		};
+
+		timer1: timer@48028000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x48028000 0x400>;
+			interrupts = <37>;
+			ti,hwmods = "timer1";
+			ti,timer-alwon;
+		};
 	};
 };

arch/arm/boot/dts/omap2430.dtsi

@@ -14,6 +14,12 @@
 	compatible = "ti,omap2430", "ti,omap2";
 
 	ocp {
+		counter32k: counter@49020000 {
+			compatible = "ti,omap-counter32k";
+			reg = <0x49020000 0x20>;
+			ti,hwmods = "counter_32k";
+		};
+
 		omap2430_pmx: pinmux@49002030 {
 			compatible = "ti,omap2430-padconf", "pinctrl-single";
 			reg = <0x49002030 0x0154>;
@@ -32,7 +38,6 @@
 				     <60>, /* RX interrupt */
 				     <61>; /* RX overflow interrupt */
 			interrupt-names = "common", "tx", "rx", "rx_overflow";
-			interrupt-parent = <&intc>;
 			ti,buffer-size = <128>;
 			ti,hwmods = "mcbsp1";
 		};
@@ -45,7 +50,6 @@
 				     <62>, /* TX interrupt */
 				     <63>; /* RX interrupt */
 			interrupt-names = "common", "tx", "rx";
-			interrupt-parent = <&intc>;
 			ti,buffer-size = <128>;
 			ti,hwmods = "mcbsp2";
 		};
@@ -58,7 +62,6 @@
 				     <89>, /* TX interrupt */
 				     <90>; /* RX interrupt */
 			interrupt-names = "common", "tx", "rx";
-			interrupt-parent = <&intc>;
 			ti,buffer-size = <128>;
 			ti,hwmods = "mcbsp3";
 		};
@@ -71,7 +74,6 @@
 				     <54>, /* TX interrupt */
 				     <55>; /* RX interrupt */
 			interrupt-names = "common", "tx", "rx";
-			interrupt-parent = <&intc>;
 			ti,buffer-size = <128>;
 			ti,hwmods = "mcbsp4";
 		};
@@ -84,9 +86,16 @@
 				     <81>, /* TX interrupt */
 				     <82>; /* RX interrupt */
 			interrupt-names = "common", "tx", "rx";
-			interrupt-parent = <&intc>;
 			ti,buffer-size = <128>;
 			ti,hwmods = "mcbsp5";
 		};
+
+		timer1: timer@49018000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x49018000 0x400>;
+			interrupts = <37>;
+			ti,hwmods = "timer1";
+			ti,timer-alwon;
+		};
 	};
 };

arch/arm/boot/dts/omap3-beagle-xm.dts

@@ -55,12 +55,6 @@
 		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
 		interrupt-parent = <&intc>;
 
-		vsim: regulator-vsim {
-			compatible = "ti,twl4030-vsim";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <3000000>;
-		};
-
 		twl_audio: audio {
 			compatible = "ti,twl4030-audio";
 			codec {

arch/arm/boot/dts/omap3-beagle.dts

@@ -0,0 +1,67 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+/include/ "omap3.dtsi"
+
+/ {
+	model = "TI OMAP3 BeagleBoard";
+	compatible = "ti,omap3-beagle", "ti,omap3";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256 MB */
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pmu_stat {
+			label = "beagleboard::pmu_stat";
+			gpios = <&twl_gpio 19 0>; /* LEDB */
+		};
+
+		heartbeat {
+			label = "beagleboard::usr0";
+			gpios = <&gpio5 22 0>; /* 150 -> D6 LED */
+			linux,default-trigger = "heartbeat";
+		};
+
+		mmc {
+			label = "beagleboard::usr1";
+			gpios = <&gpio5 21 0>; /* 149 -> D7 LED */
+			linux,default-trigger = "mmc0";
+		};
+	};
+
+};
+
+&i2c1 {
+	clock-frequency = <2600000>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+		interrupt-parent = <&intc>;
+	};
+};
+
+/include/ "twl4030.dtsi"
+
+&mmc1 {
+	vmmc-supply = <&vmmc1>;
+	vmmc_aux-supply = <&vsim>;
+	bus-width = <8>;
+};
+
+&mmc2 {
+	status = "disabled";
+};
+
+&mmc3 {
+	status = "disabled";
+};

arch/arm/boot/dts/omap3.dtsi

@@ -12,6 +12,7 @@
 
 / {
 	compatible = "ti,omap3430", "ti,omap3";
+	interrupt-parent = <&intc>;
 
 	aliases {
 		serial0 = &uart1;
@@ -60,6 +61,12 @@
 		ranges;
 		ti,hwmods = "l3_main";
 
+		counter32k: counter@48320000 {
+			compatible = "ti,omap-counter32k";
+			reg = <0x48320000 0x20>;
+			ti,hwmods = "counter_32k";
+		};
+
 		intc: interrupt-controller@48200000 {
 			compatible = "ti,omap2-intc";
 			interrupt-controller;
@@ -240,7 +247,6 @@
 				     <59>, /* TX interrupt */
 				     <60>; /* RX interrupt */
 			interrupt-names = "common", "tx", "rx";
-			interrupt-parent = <&intc>;
 			ti,buffer-size = <128>;
 			ti,hwmods = "mcbsp1";
 		};
@@ -255,7 +261,6 @@
 				     <63>, /* RX interrupt */
 				     <4>;  /* Sidetone */
 			interrupt-names = "common", "tx", "rx", "sidetone";
-			interrupt-parent = <&intc>;
 			ti,buffer-size = <1280>;
 			ti,hwmods = "mcbsp2", "mcbsp2_sidetone";
 		};
@@ -270,7 +275,6 @@
 				     <90>, /* RX interrupt */
 				     <5>;  /* Sidetone */
 			interrupt-names = "common", "tx", "rx", "sidetone";
-			interrupt-parent = <&intc>;
 			ti,buffer-size = <128>;
 			ti,hwmods = "mcbsp3", "mcbsp3_sidetone";
 		};
@@ -283,7 +287,6 @@
 				     <54>, /* TX interrupt */
 				     <55>; /* RX interrupt */
 			interrupt-names = "common", "tx", "rx";
-			interrupt-parent = <&intc>;
 			ti,buffer-size = <128>;
 			ti,hwmods = "mcbsp4";
 		};
@@ -296,9 +299,103 @@
 				     <81>, /* TX interrupt */
 				     <82>; /* RX interrupt */
 			interrupt-names = "common", "tx", "rx";
-			interrupt-parent = <&intc>;
 			ti,buffer-size = <128>;
 			ti,hwmods = "mcbsp5";
 		};
+
+		timer1: timer@48318000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x48318000 0x400>;
+			interrupts = <37>;
+			ti,hwmods = "timer1";
+			ti,timer-alwon;
+		};
+
+		timer2: timer@49032000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x49032000 0x400>;
+			interrupts = <38>;
+			ti,hwmods = "timer2";
+		};
+
+		timer3: timer@49034000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x49034000 0x400>;
+			interrupts = <39>;
+			ti,hwmods = "timer3";
+		};
+
+		timer4: timer@49036000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x49036000 0x400>;
+			interrupts = <40>;
+			ti,hwmods = "timer4";
+		};
+
+		timer5: timer@49038000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x49038000 0x400>;
+			interrupts = <41>;
+			ti,hwmods = "timer5";
+			ti,timer-dsp;
+		};
+
+		timer6: timer@4903a000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x4903a000 0x400>;
+			interrupts = <42>;
+			ti,hwmods = "timer6";
+			ti,timer-dsp;
+		};
+
+		timer7: timer@4903c000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x4903c000 0x400>;
+			interrupts = <43>;
+			ti,hwmods = "timer7";
+			ti,timer-dsp;
+		};
+
+		timer8: timer@4903e000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x4903e000 0x400>;
+			interrupts = <44>;
+			ti,hwmods = "timer8";
+			ti,timer-pwm;
+			ti,timer-dsp;
+		};
+
+		timer9: timer@49040000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x49040000 0x400>;
+			interrupts = <45>;
+			ti,hwmods = "timer9";
+			ti,timer-pwm;
+		};
+
+		timer10: timer@48086000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x48086000 0x400>;
+			interrupts = <46>;
+			ti,hwmods = "timer10";
+			ti,timer-pwm;
+		};
+
+		timer11: timer@48088000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x48088000 0x400>;
+			interrupts = <47>;
+			ti,hwmods = "timer11";
+			ti,timer-pwm;
+		};
+
+		timer12: timer@48304000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x48304000 0x400>;
+			interrupts = <95>;
+			ti,hwmods = "timer12";
+			ti,timer-alwon;
+			ti,timer-secure;
+		};
 	};
 };

arch/arm/boot/dts/omap4-panda-a4.dts

@@ -0,0 +1,17 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/include/ "omap4-panda.dts"
+
+/* Pandaboard Rev A4+ have external pullups on SCL & SDA */
+&dss_hdmi_pins {
+	pinctrl-single,pins = <
+		0x5a 0x118	/* hdmi_cec.hdmi_cec INPUT PULLUP | MODE 0 */
+		0x5c 0x100	/* hdmi_scl.hdmi_scl INPUT | MODE 0 */
+		0x5e 0x100	/* hdmi_sda.hdmi_sda INPUT | MODE 0 */
+		>;
+};

arch/arm/boot/dts/omap4-pandaES.dts → arch/arm/boot/dts/omap4-panda-es.dts

@@ -22,3 +22,12 @@
 		"AFML", "Line In",
 		"AFMR", "Line In";
 };
+
+/* PandaboardES has external pullups on SCL & SDA */
+&dss_hdmi_pins {
+	pinctrl-single,pins = <
+		0x5a 0x118	/* hdmi_cec.hdmi_cec INPUT PULLUP | MODE 0 */
+		0x5c 0x100	/* hdmi_scl.hdmi_scl INPUT | MODE 0 */
+		0x5e 0x100	/* hdmi_sda.hdmi_sda INPUT | MODE 0 */
+		>;
+};

arch/arm/boot/dts/omap4-panda.dts

@@ -65,6 +65,8 @@
 			&twl6040_pins
 			&mcpdm_pins
 			&mcbsp1_pins
+			&dss_hdmi_pins
+			&tpd12s015_pins
 	>;
 
 	twl6040_pins: pinmux_twl6040_pins {
@@ -92,6 +94,22 @@
 			0xc4 0x100	/* abe_mcbsp1_fsx.abe_mcbsp1_fsx INPUT | MODE0 */
 		>;
 	};
+
+	dss_hdmi_pins: pinmux_dss_hdmi_pins {
+		pinctrl-single,pins = <
+			0x5a 0x118	/* hdmi_cec.hdmi_cec INPUT PULLUP | MODE 0 */
+			0x5c 0x118	/* hdmi_scl.hdmi_scl INPUT PULLUP | MODE 0 */
+			0x5e 0x118	/* hdmi_sda.hdmi_sda INPUT PULLUP | MODE 0 */
+		>;
+	};
+
+	tpd12s015_pins: pinmux_tpd12s015_pins {
+		pinctrl-single,pins = <
+			0x22 0x3	/* gpmc_a17.gpio_41 OUTPUT | MODE3 */
+			0x48 0x3	/* gpmc_nbe1.gpio_60 OUTPUT | MODE3 */
+			0x58 0x10b	/* hdmi_hpd.gpio_63 INPUT PULLDOWN | MODE3 */
+		>;
+	};
 };
 
 &i2c1 {
@@ -184,3 +202,7 @@
 &dmic {
 	status = "disabled";
 };
+
+&twl_usb_comparator {
+	usb-supply = <&vusb>;
+};

arch/arm/boot/dts/omap4-sdp-es23plus.dts

@@ -0,0 +1,17 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/include/ "omap4-sdp.dts"
+
+/* SDP boards with 4430 ES2.3+ or 4460 have external pullups on SCL & SDA */
+&dss_hdmi_pins {
+	pinctrl-single,pins = <
+		0x5a 0x118	/* hdmi_cec.hdmi_cec INPUT PULLUP | MODE 0 */
+		0x5c 0x100	/* hdmi_scl.hdmi_scl INPUT | MODE 0 */
+		0x5e 0x100	/* hdmi_sda.hdmi_sda INPUT | MODE 0 */
+		>;
+};

arch/arm/boot/dts/omap4-sdp.dts

@@ -124,6 +124,8 @@
 			&dmic_pins
 			&mcbsp1_pins
 			&mcbsp2_pins
+			&dss_hdmi_pins
+			&tpd12s015_pins
 	>;
 
 	uart2_pins: pinmux_uart2_pins {
@@ -194,6 +196,22 @@
 			0xbc 0x100	/* abe_mcbsp2_fsx.abe_mcbsp2_fsx INPUT | MODE0 */
 		>;
 	};
+
+	dss_hdmi_pins: pinmux_dss_hdmi_pins {
+		pinctrl-single,pins = <
+			0x5a 0x118	/* hdmi_cec.hdmi_cec INPUT PULLUP | MODE 0 */
+			0x5c 0x118	/* hdmi_scl.hdmi_scl INPUT PULLUP | MODE 0 */
+			0x5e 0x118	/* hdmi_sda.hdmi_sda INPUT PULLUP | MODE 0 */
+		>;
+	};
+
+	tpd12s015_pins: pinmux_tpd12s015_pins {
+		pinctrl-single,pins = <
+			0x22 0x3	/* gpmc_a17.gpio_41 OUTPUT | MODE3 */
+			0x48 0x3	/* gpmc_nbe1.gpio_60 OUTPUT | MODE3 */
+			0x58 0x10b	/* hdmi_hpd.gpio_63 INPUT PULLDOWN | MODE3 */
+		>;
+	};
 };
 
 &i2c1 {
@@ -406,3 +424,7 @@
 &mcbsp3 {
 	status = "disabled";
 };
+
+&twl_usb_comparator {
+	usb-supply = <&vusb>;
+};

arch/arm/boot/dts/omap4.dtsi

@@ -95,6 +95,12 @@
 		ranges;
 		ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3";
 
+		counter32k: counter@4a304000 {
+			compatible = "ti,omap-counter32k";
+			reg = <0x4a304000 0x20>;
+			ti,hwmods = "counter_32k";
+		};
+
 		omap4_pmx_core: pinmux@4a100040 {
 			compatible = "ti,omap4-padconf", "pinctrl-single";
 			reg = <0x4a100040 0x0196>;
@@ -340,7 +346,6 @@
 			      <0x49032000 0x7f>; /* L3 Interconnect */
 			reg-names = "mpu", "dma";
 			interrupts = <0 112 0x4>;
-			interrupt-parent = <&gic>;
 			ti,hwmods = "mcpdm";
 		};
 
@@ -350,7 +355,6 @@
 			      <0x4902e000 0x7f>; /* L3 Interconnect */
 			reg-names = "mpu", "dma";
 			interrupts = <0 114 0x4>;
-			interrupt-parent = <&gic>;
 			ti,hwmods = "dmic";
 		};
 
@@ -361,7 +365,6 @@
 			reg-names = "mpu", "dma";
 			interrupts = <0 17 0x4>;
 			interrupt-names = "common";
-			interrupt-parent = <&gic>;
 			ti,buffer-size = <128>;
 			ti,hwmods = "mcbsp1";
 		};
@@ -373,7 +376,6 @@
 			reg-names = "mpu", "dma";
 			interrupts = <0 22 0x4>;
 			interrupt-names = "common";
-			interrupt-parent = <&gic>;
 			ti,buffer-size = <128>;
 			ti,hwmods = "mcbsp2";
 		};
@@ -385,7 +387,6 @@
 			reg-names = "mpu", "dma";
 			interrupts = <0 23 0x4>;
 			interrupt-names = "common";
-			interrupt-parent = <&gic>;
 			ti,buffer-size = <128>;
 			ti,hwmods = "mcbsp3";
 		};
@@ -396,7 +397,6 @@
 			reg-names = "mpu";
 			interrupts = <0 16 0x4>;
 			interrupt-names = "common";
-			interrupt-parent = <&gic>;
 			ti,buffer-size = <128>;
 			ti,hwmods = "mcbsp4";
 		};
@@ -431,12 +431,103 @@
 			hw-caps-temp-alert;
 		};
 
-		ocp2scp {
+		ocp2scp@4a0ad000 {
 			compatible = "ti,omap-ocp2scp";
+			reg = <0x4a0ad000 0x1f>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
 			ti,hwmods = "ocp2scp_usb_phy";
 		};
+
+		timer1: timer@4a318000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x4a318000 0x80>;
+			interrupts = <0 37 0x4>;
+			ti,hwmods = "timer1";
+			ti,timer-alwon;
+		};
+
+		timer2: timer@48032000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x48032000 0x80>;
+			interrupts = <0 38 0x4>;
+			ti,hwmods = "timer2";
+		};
+
+		timer3: timer@48034000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x48034000 0x80>;
+			interrupts = <0 39 0x4>;
+			ti,hwmods = "timer3";
+		};
+
+		timer4: timer@48036000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x48036000 0x80>;
+			interrupts = <0 40 0x4>;
+			ti,hwmods = "timer4";
+		};
+
+		timer5: timer@40138000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x40138000 0x80>,
+			      <0x49038000 0x80>;
+			interrupts = <0 41 0x4>;
+			ti,hwmods = "timer5";
+			ti,timer-dsp;
+		};
+
+		timer6: timer@4013a000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x4013a000 0x80>,
+			      <0x4903a000 0x80>;
+			interrupts = <0 42 0x4>;
+			ti,hwmods = "timer6";
+			ti,timer-dsp;
+		};
+
+		timer7: timer@4013c000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x4013c000 0x80>,
+			      <0x4903c000 0x80>;
+			interrupts = <0 43 0x4>;
+			ti,hwmods = "timer7";
+			ti,timer-dsp;
+		};
+
+		timer8: timer@4013e000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x4013e000 0x80>,
+			      <0x4903e000 0x80>;
+			interrupts = <0 44 0x4>;
+			ti,hwmods = "timer8";
+			ti,timer-pwm;
+			ti,timer-dsp;
+		};
+
+		timer9: timer@4803e000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x4803e000 0x80>;
+			interrupts = <0 45 0x4>;
+			ti,hwmods = "timer9";
+			ti,timer-pwm;
+		};
+
+		timer10: timer@48086000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x48086000 0x80>;
+			interrupts = <0 46 0x4>;
+			ti,hwmods = "timer10";
+			ti,timer-pwm;
+		};
+
+		timer11: timer@48088000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x48088000 0x80>;
+			interrupts = <0 47 0x4>;
+			ti,hwmods = "timer11";
+			ti,timer-pwm;
+		};
 	};
 };

arch/arm/boot/dts/omap5-evm.dts

@@ -8,6 +8,7 @@
 /dts-v1/;
 
 /include/ "omap5.dtsi"
+/include/ "samsung_k3pe0e000b.dtsi"
 
 / {
 	model = "TI OMAP5 EVM board";
@@ -15,7 +16,7 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0x80000000 0x40000000>; /* 1 GB */
+		reg = <0x80000000 0x80000000>; /* 2 GB */
 	};
 
 	vmmcsd_fixed: fixedregulator-mmcsd {
@@ -140,3 +141,13 @@
 &mcbsp3 {
 	status = "disabled";
 };
+
+&emif1 {
+	cs1-used;
+	device-handle = <&samsung_K3PE0E000B>;
+};
+
+&emif2 {
+	cs1-used;
+	device-handle = <&samsung_K3PE0E000B>;
+};

arch/arm/boot/dts/omap5.dtsi

@@ -77,6 +77,12 @@
 		ranges;
 		ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3";
 
+		counter32k: counter@4ae04000 {
+			compatible = "ti,omap-counter32k";
+			reg = <0x4ae04000 0x40>;
+			ti,hwmods = "counter_32k";
+		};
+
 		omap5_pmx_core: pinmux@4a002840 {
 			compatible = "ti,omap4-padconf", "pinctrl-single";
 			reg = <0x4a002840 0x01b6>;
@@ -104,6 +110,8 @@
 
 		gpio1: gpio@4ae10000 {
 			compatible = "ti,omap4-gpio";
+			reg = <0x4ae10000 0x200>;
+			interrupts = <0 29 0x4>;
 			ti,hwmods = "gpio1";
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -113,6 +121,8 @@
 
 		gpio2: gpio@48055000 {
 			compatible = "ti,omap4-gpio";
+			reg = <0x48055000 0x200>;
+			interrupts = <0 30 0x4>;
 			ti,hwmods = "gpio2";
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -122,6 +132,8 @@
 
 		gpio3: gpio@48057000 {
 			compatible = "ti,omap4-gpio";
+			reg = <0x48057000 0x200>;
+			interrupts = <0 31 0x4>;
 			ti,hwmods = "gpio3";
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -131,6 +143,8 @@
 
 		gpio4: gpio@48059000 {
 			compatible = "ti,omap4-gpio";
+			reg = <0x48059000 0x200>;
+			interrupts = <0 32 0x4>;
 			ti,hwmods = "gpio4";
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -140,6 +154,8 @@
 
 		gpio5: gpio@4805b000 {
 			compatible = "ti,omap4-gpio";
+			reg = <0x4805b000 0x200>;
+			interrupts = <0 33 0x4>;
 			ti,hwmods = "gpio5";
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -149,6 +165,8 @@
 
 		gpio6: gpio@4805d000 {
 			compatible = "ti,omap4-gpio";
+			reg = <0x4805d000 0x200>;
+			interrupts = <0 34 0x4>;
 			ti,hwmods = "gpio6";
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -158,6 +176,8 @@
 
 		gpio7: gpio@48051000 {
 			compatible = "ti,omap4-gpio";
+			reg = <0x48051000 0x200>;
+			interrupts = <0 35 0x4>;
 			ti,hwmods = "gpio7";
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -167,6 +187,8 @@
 
 		gpio8: gpio@48053000 {
 			compatible = "ti,omap4-gpio";
+			reg = <0x48053000 0x200>;
+			interrupts = <0 121 0x4>;
 			ti,hwmods = "gpio8";
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -176,6 +198,8 @@
 
 		i2c1: i2c@48070000 {
 			compatible = "ti,omap4-i2c";
+			reg = <0x48070000 0x100>;
+			interrupts = <0 56 0x4>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ti,hwmods = "i2c1";
@@ -183,6 +207,8 @@
 
 		i2c2: i2c@48072000 {
 			compatible = "ti,omap4-i2c";
+			reg = <0x48072000 0x100>;
+			interrupts = <0 57 0x4>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ti,hwmods = "i2c2";
@@ -190,20 +216,26 @@
 
 		i2c3: i2c@48060000 {
 			compatible = "ti,omap4-i2c";
+			reg = <0x48060000 0x100>;
+			interrupts = <0 61 0x4>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ti,hwmods = "i2c3";
 		};
 
-		i2c4: i2c@4807A000 {
+		i2c4: i2c@4807a000 {
 			compatible = "ti,omap4-i2c";
+			reg = <0x4807a000 0x100>;
+			interrupts = <0 62 0x4>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ti,hwmods = "i2c4";
 		};
 
-		i2c5: i2c@4807C000 {
+		i2c5: i2c@4807c000 {
 			compatible = "ti,omap4-i2c";
+			reg = <0x4807c000 0x100>;
+			interrupts = <0 60 0x4>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ti,hwmods = "i2c5";
@@ -211,42 +243,56 @@
 
 		uart1: serial@4806a000 {
 			compatible = "ti,omap4-uart";
+			reg = <0x4806a000 0x100>;
+			interrupts = <0 72 0x4>;
 			ti,hwmods = "uart1";
 			clock-frequency = <48000000>;
 		};
 
 		uart2: serial@4806c000 {
 			compatible = "ti,omap4-uart";
+			reg = <0x4806c000 0x100>;
+			interrupts = <0 73 0x4>;
 			ti,hwmods = "uart2";
 			clock-frequency = <48000000>;
 		};
 
 		uart3: serial@48020000 {
 			compatible = "ti,omap4-uart";
+			reg = <0x48020000 0x100>;
+			interrupts = <0 74 0x4>;
 			ti,hwmods = "uart3";
 			clock-frequency = <48000000>;
 		};
 
 		uart4: serial@4806e000 {
 			compatible = "ti,omap4-uart";
+			reg = <0x4806e000 0x100>;
+			interrupts = <0 70 0x4>;
 			ti,hwmods = "uart4";
 			clock-frequency = <48000000>;
 		};
 
 		uart5: serial@48066000 {
-			compatible = "ti,omap5-uart";
+			compatible = "ti,omap4-uart";
+			reg = <0x48066000 0x100>;
+			interrupts = <0 105 0x4>;
 			ti,hwmods = "uart5";
 			clock-frequency = <48000000>;
 		};
 
 		uart6: serial@48068000 {
-			compatible = "ti,omap6-uart";
+			compatible = "ti,omap4-uart";
+			reg = <0x48068000 0x100>;
+			interrupts = <0 106 0x4>;
 			ti,hwmods = "uart6";
 			clock-frequency = <48000000>;
 		};
 
 		mmc1: mmc@4809c000 {
 			compatible = "ti,omap4-hsmmc";
+			reg = <0x4809c000 0x400>;
+			interrupts = <0 83 0x4>;
 			ti,hwmods = "mmc1";
 			ti,dual-volt;
 			ti,needs-special-reset;
@@ -254,24 +300,32 @@
 
 		mmc2: mmc@480b4000 {
 			compatible = "ti,omap4-hsmmc";
+			reg = <0x480b4000 0x400>;
+			interrupts = <0 86 0x4>;
 			ti,hwmods = "mmc2";
 			ti,needs-special-reset;
 		};
 
 		mmc3: mmc@480ad000 {
 			compatible = "ti,omap4-hsmmc";
+			reg = <0x480ad000 0x400>;
+			interrupts = <0 94 0x4>;
 			ti,hwmods = "mmc3";
 			ti,needs-special-reset;
 		};
 
 		mmc4: mmc@480d1000 {
 			compatible = "ti,omap4-hsmmc";
+			reg = <0x480d1000 0x400>;
+			interrupts = <0 96 0x4>;
 			ti,hwmods = "mmc4";
 			ti,needs-special-reset;
 		};
 
 		mmc5: mmc@480d5000 {
 			compatible = "ti,omap4-hsmmc";
+			reg = <0x480d5000 0x400>;
+			interrupts = <0 59 0x4>;
 			ti,hwmods = "mmc5";
 			ti,needs-special-reset;
 		};
@@ -287,7 +341,6 @@
 			      <0x49032000 0x7f>; /* L3 Interconnect */
 			reg-names = "mpu", "dma";
 			interrupts = <0 112 0x4>;
-			interrupt-parent = <&gic>;
 			ti,hwmods = "mcpdm";
 		};
 
@@ -297,7 +350,6 @@
 			      <0x4902e000 0x7f>; /* L3 Interconnect */
 			reg-names = "mpu", "dma";
 			interrupts = <0 114 0x4>;
-			interrupt-parent = <&gic>;
 			ti,hwmods = "dmic";
 		};
 
@@ -308,7 +360,6 @@
 			reg-names = "mpu", "dma";
 			interrupts = <0 17 0x4>;
 			interrupt-names = "common";
-			interrupt-parent = <&gic>;
 			ti,buffer-size = <128>;
 			ti,hwmods = "mcbsp1";
 		};
@@ -320,7 +371,6 @@
 			reg-names = "mpu", "dma";
 			interrupts = <0 22 0x4>;
 			interrupt-names = "common";
-			interrupt-parent = <&gic>;
 			ti,buffer-size = <128>;
 			ti,hwmods = "mcbsp2";
 		};
@@ -332,9 +382,119 @@
 			reg-names = "mpu", "dma";
 			interrupts = <0 23 0x4>;
 			interrupt-names = "common";
-			interrupt-parent = <&gic>;
 			ti,buffer-size = <128>;
 			ti,hwmods = "mcbsp3";
 		};
+
+		timer1: timer@4ae18000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x4ae18000 0x80>;
+			interrupts = <0 37 0x4>;
+			ti,hwmods = "timer1";
+			ti,timer-alwon;
+		};
+
+		timer2: timer@48032000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x48032000 0x80>;
+			interrupts = <0 38 0x4>;
+			ti,hwmods = "timer2";
+		};
+
+		timer3: timer@48034000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x48034000 0x80>;
+			interrupts = <0 39 0x4>;
+			ti,hwmods = "timer3";
+		};
+
+		timer4: timer@48036000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x48036000 0x80>;
+			interrupts = <0 40 0x4>;
+			ti,hwmods = "timer4";
+		};
+
+		timer5: timer@40138000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x40138000 0x80>,
+			      <0x49038000 0x80>;
+			interrupts = <0 41 0x4>;
+			ti,hwmods = "timer5";
+			ti,timer-dsp;
+		};
+
+		timer6: timer@4013a000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x4013a000 0x80>,
+			      <0x4903a000 0x80>;
+			interrupts = <0 42 0x4>;
+			ti,hwmods = "timer6";
+			ti,timer-dsp;
+			ti,timer-pwm;
+		};
+
+		timer7: timer@4013c000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x4013c000 0x80>,
+			      <0x4903c000 0x80>;
+			interrupts = <0 43 0x4>;
+			ti,hwmods = "timer7";
+			ti,timer-dsp;
+		};
+
+		timer8: timer@4013e000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x4013e000 0x80>,
+			      <0x4903e000 0x80>;
+			interrupts = <0 44 0x4>;
+			ti,hwmods = "timer8";
+			ti,timer-dsp;
+			ti,timer-pwm;
+		};
+
+		timer9: timer@4803e000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x4803e000 0x80>;
+			interrupts = <0 45 0x4>;
+			ti,hwmods = "timer9";
+		};
+
+		timer10: timer@48086000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x48086000 0x80>;
+			interrupts = <0 46 0x4>;
+			ti,hwmods = "timer10";
+		};
+
+		timer11: timer@48088000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x48088000 0x80>;
+			interrupts = <0 47 0x4>;
+			ti,hwmods = "timer11";
+			ti,timer-pwm;
+		};
+
+		emif1: emif@0x4c000000 {
+			compatible	= "ti,emif-4d5";
+			ti,hwmods	= "emif1";
+			phy-type	= <2>; /* DDR PHY type: Intelli PHY */
+			reg = <0x4c000000 0x400>;
+			interrupts = <0 110 0x4>;
+			hw-caps-read-idle-ctrl;
+			hw-caps-ll-interface;
+			hw-caps-temp-alert;
+		};
+
+		emif2: emif@0x4d000000 {
+			compatible	= "ti,emif-4d5";
+			ti,hwmods	= "emif2";
+			phy-type	= <2>; /* DDR PHY type: Intelli PHY */
+			reg = <0x4d000000 0x400>;
+			interrupts = <0 111 0x4>;
+			hw-caps-read-idle-ctrl;
+			hw-caps-ll-interface;
+			hw-caps-temp-alert;
+		};
 	};
 };

arch/arm/boot/dts/samsung_k3pe0e000b.dtsi

@@ -0,0 +1,67 @@
+/*
+ * Timings and Geometry for Samsung K3PE0E000B memory part
+ */
+
+/ {
+	samsung_K3PE0E000B: lpddr2 {
+		compatible	= "Samsung,K3PE0E000B","jedec,lpddr2-s4";
+		density		= <4096>;
+		io-width	= <32>;
+
+		tRPab-min-tck	= <3>;
+		tRCD-min-tck	= <3>;
+		tWR-min-tck	= <3>;
+		tRASmin-min-tck	= <3>;
+		tRRD-min-tck	= <2>;
+		tWTR-min-tck	= <2>;
+		tXP-min-tck	= <2>;
+		tRTP-min-tck	= <2>;
+		tCKE-min-tck	= <3>;
+		tCKESR-min-tck	= <3>;
+		tFAW-min-tck	= <8>;
+
+		timings_samsung_K3PE0E000B_533MHz: lpddr2-timings@0 {
+			compatible	= "jedec,lpddr2-timings";
+			min-freq	= <10000000>;
+			max-freq	= <533333333>;
+			tRPab		= <21000>;
+			tRCD		= <18000>;
+			tWR		= <15000>;
+			tRAS-min	= <42000>;
+			tRRD		= <10000>;
+			tWTR		= <7500>;
+			tXP		= <7500>;
+			tRTP		= <7500>;
+			tCKESR		= <15000>;
+			tDQSCK-max	= <5500>;
+			tFAW		= <50000>;
+			tZQCS		= <90000>;
+			tZQCL		= <360000>;
+			tZQinit		= <1000000>;
+			tRAS-max-ns	= <70000>;
+			tDQSCK-max-derated = <6000>;
+		};
+
+		timings_samsung_K3PE0E000B_266MHz: lpddr2-timings@1 {
+			compatible	= "jedec,lpddr2-timings";
+			min-freq	= <10000000>;
+			max-freq	= <266666666>;
+			tRPab		= <21000>;
+			tRCD		= <18000>;
+			tWR		= <15000>;
+			tRAS-min	= <42000>;
+			tRRD		= <10000>;
+			tWTR		= <7500>;
+			tXP		= <7500>;
+			tRTP		= <7500>;
+			tCKESR		= <15000>;
+			tDQSCK-max	= <5500>;
+			tFAW		= <50000>;
+			tZQCS		= <90000>;
+			tZQCL		= <360000>;
+			tZQinit		= <1000000>;
+			tRAS-max-ns	= <70000>;
+			tDQSCK-max-derated = <6000>;
+		};
+	};
+};

arch/arm/boot/dts/twl4030.dtsi

@@ -37,6 +37,24 @@
 		regulator-max-microvolt = <3150000>;
 	};
 
+	vusb1v5: regulator-vusb1v5 {
+		compatible = "ti,twl4030-vusb1v5";
+	};
+
+	vusb1v8: regulator-vusb1v8 {
+		compatible = "ti,twl4030-vusb1v8";
+	};
+
+	vusb3v1: regulator-vusb3v1 {
+		compatible = "ti,twl4030-vusb3v1";
+	};
+
+	vsim: regulator-vsim {
+		compatible = "ti,twl4030-vsim";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3000000>;
+	};
+
 	twl_gpio: gpio {
 		compatible = "ti,twl4030-gpio";
 		gpio-controller;
@@ -44,4 +62,13 @@
 		interrupt-controller;
 		#interrupt-cells = <1>;
 	};
+
+	twl4030-usb {
+		compatible = "ti,twl4030-usb";
+		interrupts = <10>, <4>;
+		usb1v5-supply = <&vusb1v5>;
+		usb1v8-supply = <&vusb1v8>;
+		usb3v1-supply = <&vusb3v1>;
+		usb_mode = <1>;
+	};
 };

arch/arm/boot/dts/twl6030.dtsi

@@ -86,4 +86,9 @@
 	clk32kg: regulator-clk32kg {
 		compatible = "ti,twl6030-clk32kg";
 	};
+
+	twl_usb_comparator: usb-comparator {
+		compatible = "ti,twl6030-usb";
+		interrupts = <4>, <10>;
+	};
 };

arch/arm/mach-omap1/timer.c

@@ -25,6 +25,7 @@
 #include <linux/err.h>
 #include <linux/slab.h>
 #include <linux/platform_device.h>
+#include <linux/platform_data/dmtimer-omap.h>
 
 #include <mach/irqs.h>
 

arch/arm/mach-omap1/timer32k.c

@@ -51,7 +51,6 @@
 #include <asm/mach/time.h>
 
 #include <plat/counter-32k.h>
-#include <plat/dmtimer.h>
 
 #include <mach/hardware.h>
 

arch/arm/mach-omap2/board-cm-t3517.c

@@ -297,6 +297,6 @@ MACHINE_START(CM_T3517, "Compulab CM-T3517")
 	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= cm_t3517_init,
 	.init_late	= am35xx_init_late,
-	.timer		= &omap3_timer,
+	.timer		= &omap3_gp_timer,
 	.restart	= omap3xxx_restart,
 MACHINE_END

arch/arm/mach-omap2/board-generic.c

@@ -97,6 +97,23 @@ DT_MACHINE_START(OMAP3_DT, "Generic OMAP3 (Flattened Device Tree)")
 	.dt_compat	= omap3_boards_compat,
 	.restart	= omap3xxx_restart,
 MACHINE_END
+
+static const char *omap3_gp_boards_compat[] __initdata = {
+	"ti,omap3-beagle",
+	NULL,
+};
+
+DT_MACHINE_START(OMAP3_GP_DT, "Generic OMAP3-GP (Flattened Device Tree)")
+	.reserve	= omap_reserve,
+	.map_io		= omap3_map_io,
+	.init_early	= omap3430_init_early,
+	.init_irq	= omap_intc_of_init,
+	.handle_irq	= omap3_intc_handle_irq,
+	.init_machine	= omap_generic_init,
+	.timer		= &omap3_secure_timer,
+	.dt_compat	= omap3_gp_boards_compat,
+	.restart	= omap_prcm_restart,
+MACHINE_END
 #endif
 
 #ifdef CONFIG_SOC_AM33XX

arch/arm/mach-omap2/common.h

@@ -82,6 +82,7 @@ extern void omap2_init_common_infrastructure(void);
 extern struct sys_timer omap2_timer;
 extern struct sys_timer omap3_timer;
 extern struct sys_timer omap3_secure_timer;
+extern struct sys_timer omap3_gp_timer;
 extern struct sys_timer omap3_am33xx_timer;
 extern struct sys_timer omap4_timer;
 extern struct sys_timer omap5_timer;

arch/arm/mach-omap2/omap_hwmod_2420_data.c

@@ -17,7 +17,6 @@
 #include <linux/platform_data/spi-omap2-mcspi.h>
 
 #include <plat-omap/dma-omap.h>
-#include <plat/dmtimer.h>
 
 #include "omap_hwmod.h"
 #include "l3_2xxx.h"

arch/arm/mach-omap2/omap_hwmod_2430_data.c

@@ -18,7 +18,6 @@
 #include <linux/platform_data/spi-omap2-mcspi.h>
 
 #include <plat-omap/dma-omap.h>
-#include <plat/dmtimer.h>
 
 #include "omap_hwmod.h"
 #include "mmc.h"

arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c

@@ -58,8 +58,9 @@ static struct omap_hwmod_class_sysconfig omap2xxx_timer_sysc = {
 	.syss_offs	= 0x0014,
 	.sysc_flags	= (SYSC_HAS_SIDLEMODE | SYSC_HAS_CLOCKACTIVITY |
 			   SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
-			   SYSC_HAS_AUTOIDLE),
+			   SYSC_HAS_AUTOIDLE | SYSS_HAS_RESET_STATUS),
 	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+	.clockact       = CLOCKACT_TEST_ICLK,
 	.sysc_fields	= &omap_hwmod_sysc_type1,
 };
 
@@ -268,6 +269,7 @@ struct omap_hwmod omap2xxx_timer1_hwmod = {
 	},
 	.dev_attr	= &capability_alwon_dev_attr,
 	.class		= &omap2xxx_timer_hwmod_class,
+	.flags          = HWMOD_SET_DEFAULT_CLOCKACT,
 };
 
 /* timer2 */
@@ -286,6 +288,7 @@ struct omap_hwmod omap2xxx_timer2_hwmod = {
 		},
 	},
 	.class		= &omap2xxx_timer_hwmod_class,
+	.flags          = HWMOD_SET_DEFAULT_CLOCKACT,
 };
 
 /* timer3 */
@@ -304,6 +307,7 @@ struct omap_hwmod omap2xxx_timer3_hwmod = {
 		},
 	},
 	.class		= &omap2xxx_timer_hwmod_class,
+	.flags          = HWMOD_SET_DEFAULT_CLOCKACT,
 };
 
 /* timer4 */
@@ -322,6 +326,7 @@ struct omap_hwmod omap2xxx_timer4_hwmod = {
 		},
 	},
 	.class		= &omap2xxx_timer_hwmod_class,
+	.flags          = HWMOD_SET_DEFAULT_CLOCKACT,
 };
 
 /* timer5 */
@@ -341,6 +346,7 @@ struct omap_hwmod omap2xxx_timer5_hwmod = {
 	},
 	.dev_attr	= &capability_dsp_dev_attr,
 	.class		= &omap2xxx_timer_hwmod_class,
+	.flags          = HWMOD_SET_DEFAULT_CLOCKACT,
 };
 
 /* timer6 */
@@ -360,6 +366,7 @@ struct omap_hwmod omap2xxx_timer6_hwmod = {
 	},
 	.dev_attr	= &capability_dsp_dev_attr,
 	.class		= &omap2xxx_timer_hwmod_class,
+	.flags          = HWMOD_SET_DEFAULT_CLOCKACT,
 };
 
 /* timer7 */
@@ -379,6 +386,7 @@ struct omap_hwmod omap2xxx_timer7_hwmod = {
 	},
 	.dev_attr	= &capability_dsp_dev_attr,
 	.class		= &omap2xxx_timer_hwmod_class,
+	.flags          = HWMOD_SET_DEFAULT_CLOCKACT,
 };
 
 /* timer8 */
@@ -398,6 +406,7 @@ struct omap_hwmod omap2xxx_timer8_hwmod = {
 	},
 	.dev_attr	= &capability_dsp_dev_attr,
 	.class		= &omap2xxx_timer_hwmod_class,
+	.flags          = HWMOD_SET_DEFAULT_CLOCKACT,
 };
 
 /* timer9 */
@@ -417,6 +426,7 @@ struct omap_hwmod omap2xxx_timer9_hwmod = {
 	},
 	.dev_attr	= &capability_pwm_dev_attr,
 	.class		= &omap2xxx_timer_hwmod_class,
+	.flags          = HWMOD_SET_DEFAULT_CLOCKACT,
 };
 
 /* timer10 */
@@ -436,6 +446,7 @@ struct omap_hwmod omap2xxx_timer10_hwmod = {
 	},
 	.dev_attr	= &capability_pwm_dev_attr,
 	.class		= &omap2xxx_timer_hwmod_class,
+	.flags          = HWMOD_SET_DEFAULT_CLOCKACT,
 };
 
 /* timer11 */
@@ -455,6 +466,7 @@ struct omap_hwmod omap2xxx_timer11_hwmod = {
 	},
 	.dev_attr	= &capability_pwm_dev_attr,
 	.class		= &omap2xxx_timer_hwmod_class,
+	.flags          = HWMOD_SET_DEFAULT_CLOCKACT,
 };
 
 /* timer12 */
@@ -474,6 +486,7 @@ struct omap_hwmod omap2xxx_timer12_hwmod = {
 	},
 	.dev_attr	= &capability_pwm_dev_attr,
 	.class		= &omap2xxx_timer_hwmod_class,
+	.flags          = HWMOD_SET_DEFAULT_CLOCKACT,
 };
 
 /* wd_timer2 */

arch/arm/mach-omap2/omap_hwmod_3xxx_data.c

@@ -153,29 +153,16 @@ static struct omap_hwmod omap3xxx_debugss_hwmod = {
 };
 
 /* timer class */
-static struct omap_hwmod_class_sysconfig omap3xxx_timer_1ms_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0010,
-	.syss_offs	= 0x0014,
-	.sysc_flags	= (SYSC_HAS_SIDLEMODE | SYSC_HAS_CLOCKACTIVITY |
-				SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
-				SYSC_HAS_EMUFREE | SYSC_HAS_AUTOIDLE),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
-	.sysc_fields	= &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class omap3xxx_timer_1ms_hwmod_class = {
-	.name = "timer",
-	.sysc = &omap3xxx_timer_1ms_sysc,
-};
-
 static struct omap_hwmod_class_sysconfig omap3xxx_timer_sysc = {
 	.rev_offs	= 0x0000,
 	.sysc_offs	= 0x0010,
 	.syss_offs	= 0x0014,
-	.sysc_flags	= (SYSC_HAS_SIDLEMODE | SYSC_HAS_ENAWAKEUP |
-			   SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE),
+	.sysc_flags	= (SYSC_HAS_SIDLEMODE | SYSC_HAS_CLOCKACTIVITY |
+			   SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
+			   SYSC_HAS_EMUFREE | SYSC_HAS_AUTOIDLE |
+			   SYSS_HAS_RESET_STATUS),
 	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+	.clockact	= CLOCKACT_TEST_ICLK,
 	.sysc_fields	= &omap_hwmod_sysc_type1,
 };
 
@@ -224,7 +211,8 @@ static struct omap_hwmod omap3xxx_timer1_hwmod = {
 		},
 	},
 	.dev_attr	= &capability_alwon_dev_attr,
-	.class		= &omap3xxx_timer_1ms_hwmod_class,
+	.class		= &omap3xxx_timer_hwmod_class,
+	.flags		= HWMOD_SET_DEFAULT_CLOCKACT,
 };
 
 /* timer2 */
@@ -241,7 +229,8 @@ static struct omap_hwmod omap3xxx_timer2_hwmod = {
 			.idlest_idle_bit = OMAP3430_ST_GPT2_SHIFT,
 		},
 	},
-	.class		= &omap3xxx_timer_1ms_hwmod_class,
+	.class		= &omap3xxx_timer_hwmod_class,
+	.flags		= HWMOD_SET_DEFAULT_CLOCKACT,
 };
 
 /* timer3 */
@@ -259,6 +248,7 @@ static struct omap_hwmod omap3xxx_timer3_hwmod = {
 		},
 	},
 	.class		= &omap3xxx_timer_hwmod_class,
+	.flags		= HWMOD_SET_DEFAULT_CLOCKACT,
 };
 
 /* timer4 */
@@ -276,6 +266,7 @@ static struct omap_hwmod omap3xxx_timer4_hwmod = {
 		},
 	},
 	.class		= &omap3xxx_timer_hwmod_class,
+	.flags		= HWMOD_SET_DEFAULT_CLOCKACT,
 };
 
 /* timer5 */
@@ -294,6 +285,7 @@ static struct omap_hwmod omap3xxx_timer5_hwmod = {
 	},
 	.dev_attr	= &capability_dsp_dev_attr,
 	.class		= &omap3xxx_timer_hwmod_class,
+	.flags		= HWMOD_SET_DEFAULT_CLOCKACT,
 };
 
 /* timer6 */
@@ -312,6 +304,7 @@ static struct omap_hwmod omap3xxx_timer6_hwmod = {
 	},
 	.dev_attr	= &capability_dsp_dev_attr,
 	.class		= &omap3xxx_timer_hwmod_class,
+	.flags		= HWMOD_SET_DEFAULT_CLOCKACT,
 };
 
 /* timer7 */
@@ -330,6 +323,7 @@ static struct omap_hwmod omap3xxx_timer7_hwmod = {
 	},
 	.dev_attr	= &capability_dsp_dev_attr,
 	.class		= &omap3xxx_timer_hwmod_class,
+	.flags		= HWMOD_SET_DEFAULT_CLOCKACT,
 };
 
 /* timer8 */
@@ -348,6 +342,7 @@ static struct omap_hwmod omap3xxx_timer8_hwmod = {
 	},
 	.dev_attr	= &capability_dsp_pwm_dev_attr,
 	.class		= &omap3xxx_timer_hwmod_class,
+	.flags		= HWMOD_SET_DEFAULT_CLOCKACT,
 };
 
 /* timer9 */
@@ -366,6 +361,7 @@ static struct omap_hwmod omap3xxx_timer9_hwmod = {
 	},
 	.dev_attr	= &capability_pwm_dev_attr,
 	.class		= &omap3xxx_timer_hwmod_class,
+	.flags		= HWMOD_SET_DEFAULT_CLOCKACT,
 };
 
 /* timer10 */
@@ -383,7 +379,8 @@ static struct omap_hwmod omap3xxx_timer10_hwmod = {
 		},
 	},
 	.dev_attr	= &capability_pwm_dev_attr,
-	.class		= &omap3xxx_timer_1ms_hwmod_class,
+	.class		= &omap3xxx_timer_hwmod_class,
+	.flags		= HWMOD_SET_DEFAULT_CLOCKACT,
 };
 
 /* timer11 */
@@ -402,6 +399,7 @@ static struct omap_hwmod omap3xxx_timer11_hwmod = {
 	},
 	.dev_attr	= &capability_pwm_dev_attr,
 	.class		= &omap3xxx_timer_hwmod_class,
+	.flags		= HWMOD_SET_DEFAULT_CLOCKACT,
 };
 
 /* timer12 */
@@ -425,6 +423,7 @@ static struct omap_hwmod omap3xxx_timer12_hwmod = {
 	},
 	.dev_attr	= &capability_secure_dev_attr,
 	.class		= &omap3xxx_timer_hwmod_class,
+	.flags		= HWMOD_SET_DEFAULT_CLOCKACT,
 };
 
 /*

arch/arm/mach-omap2/omap_hwmod_44xx_data.c

@@ -3103,6 +3103,7 @@ static struct omap_hwmod_class_sysconfig omap44xx_timer_1ms_sysc = {
 			   SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
 			   SYSS_HAS_RESET_STATUS),
 	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+	.clockact	= CLOCKACT_TEST_ICLK,
 	.sysc_fields	= &omap_hwmod_sysc_type1,
 };
 
@@ -3156,6 +3157,7 @@ static struct omap_hwmod omap44xx_timer1_hwmod = {
 	.name		= "timer1",
 	.class		= &omap44xx_timer_1ms_hwmod_class,
 	.clkdm_name	= "l4_wkup_clkdm",
+	.flags		= HWMOD_SET_DEFAULT_CLOCKACT,
 	.mpu_irqs	= omap44xx_timer1_irqs,
 	.main_clk	= "timer1_fck",
 	.prcm = {
@@ -3178,6 +3180,7 @@ static struct omap_hwmod omap44xx_timer2_hwmod = {
 	.name		= "timer2",
 	.class		= &omap44xx_timer_1ms_hwmod_class,
 	.clkdm_name	= "l4_per_clkdm",
+	.flags		= HWMOD_SET_DEFAULT_CLOCKACT,
 	.mpu_irqs	= omap44xx_timer2_irqs,
 	.main_clk	= "timer2_fck",
 	.prcm = {
@@ -3352,6 +3355,7 @@ static struct omap_hwmod omap44xx_timer10_hwmod = {
 	.name		= "timer10",
 	.class		= &omap44xx_timer_1ms_hwmod_class,
 	.clkdm_name	= "l4_per_clkdm",
+	.flags		= HWMOD_SET_DEFAULT_CLOCKACT,
 	.mpu_irqs	= omap44xx_timer10_irqs,
 	.main_clk	= "timer10_fck",
 	.prcm = {

arch/arm/mach-omap2/pm-debug.c

@@ -30,7 +30,6 @@
 #include "clock.h"
 #include "powerdomain.h"
 #include "clockdomain.h"
-#include <plat/dmtimer.h>
 #include "omap-pm.h"
 
 #include "soc.h"

arch/arm/mach-omap2/timer.c

@@ -37,6 +37,10 @@
 #include <linux/clockchips.h>
 #include <linux/slab.h>
 #include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/platform_device.h>
+#include <linux/platform_data/dmtimer-omap.h>
 
 #include <asm/mach/time.h>
 #include <asm/smp_twd.h>
@@ -62,18 +66,6 @@
 #define OMAP3_32K_SOURCE	"omap_32k_fck"
 #define OMAP4_32K_SOURCE	"sys_32k_ck"
 
-#ifdef CONFIG_OMAP_32K_TIMER
-#define OMAP2_CLKEV_SOURCE	OMAP2_32K_SOURCE
-#define OMAP3_CLKEV_SOURCE	OMAP3_32K_SOURCE
-#define OMAP4_CLKEV_SOURCE	OMAP4_32K_SOURCE
-#define OMAP3_SECURE_TIMER	12
-#else
-#define OMAP2_CLKEV_SOURCE	OMAP2_MPU_SOURCE
-#define OMAP3_CLKEV_SOURCE	OMAP3_MPU_SOURCE
-#define OMAP4_CLKEV_SOURCE	OMAP4_MPU_SOURCE
-#define OMAP3_SECURE_TIMER	1
-#endif
-
 #define REALTIME_COUNTER_BASE				0x48243200
 #define INCREMENTER_NUMERATOR_OFFSET			0x10
 #define INCREMENTER_DENUMERATOR_RELOAD_OFFSET		0x14
@@ -104,7 +96,7 @@ static int omap2_gp_timer_set_next_event(unsigned long cycles,
 					 struct clock_event_device *evt)
 {
 	__omap_dm_timer_load_start(&clkev, OMAP_TIMER_CTRL_ST,
-						0xffffffff - cycles, 1);
+				   0xffffffff - cycles, OMAP_TIMER_POSTED);
 
 	return 0;
 }
@@ -114,7 +106,7 @@ static void omap2_gp_timer_set_mode(enum clock_event_mode mode,
 {
 	u32 period;
 
-	__omap_dm_timer_stop(&clkev, 1, clkev.rate);
+	__omap_dm_timer_stop(&clkev, OMAP_TIMER_POSTED, clkev.rate);
 
 	switch (mode) {
 	case CLOCK_EVT_MODE_PERIODIC:
@@ -122,10 +114,10 @@ static void omap2_gp_timer_set_mode(enum clock_event_mode mode,
 		period -= 1;
 		/* Looks like we need to first set the load value separately */
 		__omap_dm_timer_write(&clkev, OMAP_TIMER_LOAD_REG,
-					0xffffffff - period, 1);
+				      0xffffffff - period, OMAP_TIMER_POSTED);
 		__omap_dm_timer_load_start(&clkev,
 					OMAP_TIMER_CTRL_AR | OMAP_TIMER_CTRL_ST,
-						0xffffffff - period, 1);
+					0xffffffff - period, OMAP_TIMER_POSTED);
 		break;
 	case CLOCK_EVT_MODE_ONESHOT:
 		break;
@@ -145,36 +137,144 @@ static struct clock_event_device clockevent_gpt = {
 	.set_mode	= omap2_gp_timer_set_mode,
 };
 
+static struct property device_disabled = {
+	.name = "status",
+	.length = sizeof("disabled"),
+	.value = "disabled",
+};
+
+static struct of_device_id omap_timer_match[] __initdata = {
+	{ .compatible = "ti,omap2-timer", },
+	{ }
+};
+
+/**
+ * omap_get_timer_dt - get a timer using device-tree
+ * @match	- device-tree match structure for matching a device type
+ * @property	- optional timer property to match
+ *
+ * Helper function to get a timer during early boot using device-tree for use
+ * as kernel system timer. Optionally, the property argument can be used to
+ * select a timer with a specific property. Once a timer is found then mark
+ * the timer node in device-tree as disabled, to prevent the kernel from
+ * registering this timer as a platform device and so no one else can use it.
+ */
+static struct device_node * __init omap_get_timer_dt(struct of_device_id *match,
+						     const char *property)
+{
+	struct device_node *np;
+
+	for_each_matching_node(np, match) {
+		if (!of_device_is_available(np)) {
+			of_node_put(np);
+			continue;
+		}
+
+		if (property && !of_get_property(np, property, NULL)) {
+			of_node_put(np);
+			continue;
+		}
+
+		prom_add_property(np, &device_disabled);
+		return np;
+	}
+
+	return NULL;
+}
+
+/**
+ * omap_dmtimer_init - initialisation function when device tree is used
+ *
+ * For secure OMAP3 devices, timers with device type "timer-secure" cannot
+ * be used by the kernel as they are reserved. Therefore, to prevent the
+ * kernel registering these devices remove them dynamically from the device
+ * tree on boot.
+ */
+void __init omap_dmtimer_init(void)
+{
+	struct device_node *np;
+
+	if (!cpu_is_omap34xx())
+		return;
+
+	/* If we are a secure device, remove any secure timer nodes */
+	if ((omap_type() != OMAP2_DEVICE_TYPE_GP)) {
+		np = omap_get_timer_dt(omap_timer_match, "ti,timer-secure");
+		if (np)
+			of_node_put(np);
+	}
+}
+
+/**
+ * omap_dm_timer_get_errata - get errata flags for a timer
+ *
+ * Get the timer errata flags that are specific to the OMAP device being used.
+ */
+u32 __init omap_dm_timer_get_errata(void)
+{
+	if (cpu_is_omap24xx())
+		return 0;
+
+	return OMAP_TIMER_ERRATA_I103_I767;
+}
+
 static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer,
 						int gptimer_id,
-						const char *fck_source)
+						const char *fck_source,
+						const char *property,
+						int posted)
 {
 	char name[10]; /* 10 = sizeof("gptXX_Xck0") */
+	const char *oh_name;
+	struct device_node *np;
 	struct omap_hwmod *oh;
-	struct resource irq_rsrc, mem_rsrc;
-	size_t size;
-	int res = 0;
-	int r;
-
-	sprintf(name, "timer%d", gptimer_id);
-	omap_hwmod_setup_one(name);
-	oh = omap_hwmod_lookup(name);
+	struct resource irq, mem;
+	int r = 0;
+
+	if (of_have_populated_dt()) {
+		np = omap_get_timer_dt(omap_timer_match, NULL);
+		if (!np)
+			return -ENODEV;
+
+		of_property_read_string_index(np, "ti,hwmods", 0, &oh_name);
+		if (!oh_name)
+			return -ENODEV;
+
+		timer->irq = irq_of_parse_and_map(np, 0);
+		if (!timer->irq)
+			return -ENXIO;
+
+		timer->io_base = of_iomap(np, 0);
+
+		of_node_put(np);
+	} else {
+		if (omap_dm_timer_reserve_systimer(gptimer_id))
+			return -ENODEV;
+
+		sprintf(name, "timer%d", gptimer_id);
+		oh_name = name;
+	}
+
+	oh = omap_hwmod_lookup(oh_name);
 	if (!oh)
 		return -ENODEV;
 
-	r = omap_hwmod_get_resource_byname(oh, IORESOURCE_IRQ, NULL, &irq_rsrc);
-	if (r)
-		return -ENXIO;
-	timer->irq = irq_rsrc.start;
+	if (!of_have_populated_dt()) {
+		r = omap_hwmod_get_resource_byname(oh, IORESOURCE_IRQ, NULL,
+						   &irq);
+		if (r)
+			return -ENXIO;
+		timer->irq = irq.start;
 
-	r = omap_hwmod_get_resource_byname(oh, IORESOURCE_MEM, NULL, &mem_rsrc);
-	if (r)
-		return -ENXIO;
-	timer->phys_base = mem_rsrc.start;
-	size = mem_rsrc.end - mem_rsrc.start;
+		r = omap_hwmod_get_resource_byname(oh, IORESOURCE_MEM, NULL,
+						   &mem);
+		if (r)
+			return -ENXIO;
+
+		/* Static mapping, never released */
+		timer->io_base = ioremap(mem.start, mem.end - mem.start);
+	}
 
-	/* Static mapping, never released */
-	timer->io_base = ioremap(timer->phys_base, size);
 	if (!timer->io_base)
 		return -ENXIO;
 
@@ -183,42 +283,56 @@ static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer,
 	if (IS_ERR(timer->fclk))
 		return -ENODEV;
 
-	omap_hwmod_enable(oh);
-
-	if (omap_dm_timer_reserve_systimer(gptimer_id))
-		return -ENODEV;
-
+	/* FIXME: Need to remove hard-coded test on timer ID */
 	if (gptimer_id != 12) {
 		struct clk *src;
 
 		src = clk_get(NULL, fck_source);
 		if (IS_ERR(src)) {
-			res = -EINVAL;
+			r = -EINVAL;
 		} else {
-			res = __omap_dm_timer_set_source(timer->fclk, src);
-			if (IS_ERR_VALUE(res))
-				pr_warning("%s: timer%i cannot set source\n",
-						__func__, gptimer_id);
+			r = clk_set_parent(timer->fclk, src);
+			if (IS_ERR_VALUE(r))
+				pr_warn("%s: %s cannot set source\n",
+					__func__, oh->name);
 			clk_put(src);
 		}
 	}
+
+	omap_hwmod_setup_one(oh_name);
+	omap_hwmod_enable(oh);
 	__omap_dm_timer_init_regs(timer);
-	__omap_dm_timer_reset(timer, 1, 1);
-	timer->posted = 1;
 
-	timer->rate = clk_get_rate(timer->fclk);
+	if (posted)
+		__omap_dm_timer_enable_posted(timer);
+
+	/* Check that the intended posted configuration matches the actual */
+	if (posted != timer->posted)
+		return -EINVAL;
 
+	timer->rate = clk_get_rate(timer->fclk);
 	timer->reserved = 1;
 
-	return res;
+	return r;
 }
 
 static void __init omap2_gp_clockevent_init(int gptimer_id,
-						const char *fck_source)
+						const char *fck_source,
+						const char *property)
 {
 	int res;
 
-	res = omap_dm_timer_init_one(&clkev, gptimer_id, fck_source);
+	clkev.errata = omap_dm_timer_get_errata();
+
+	/*
+	 * For clock-event timers we never read the timer counter and
+	 * so we are not impacted by errata i103 and i767. Therefore,
+	 * we can safely ignore this errata for clock-event timers.
+	 */
+	__omap_dm_timer_override_errata(&clkev, OMAP_TIMER_ERRATA_I103_I767);
+
+	res = omap_dm_timer_init_one(&clkev, gptimer_id, fck_source, property,
+				     OMAP_TIMER_POSTED);
 	BUG_ON(res);
 
 	omap2_gp_timer_irq.dev_id = &clkev;
@@ -251,7 +365,8 @@ static bool use_gptimer_clksrc;
  */
 static cycle_t clocksource_read_cycles(struct clocksource *cs)
 {
-	return (cycle_t)__omap_dm_timer_read_counter(&clksrc, 1);
+	return (cycle_t)__omap_dm_timer_read_counter(&clksrc,
+						     OMAP_TIMER_NONPOSTED);
 }
 
 static struct clocksource clocksource_gpt = {
@@ -265,20 +380,40 @@ static struct clocksource clocksource_gpt = {
 static u32 notrace dmtimer_read_sched_clock(void)
 {
 	if (clksrc.reserved)
-		return __omap_dm_timer_read_counter(&clksrc, 1);
+		return __omap_dm_timer_read_counter(&clksrc,
+						    OMAP_TIMER_NONPOSTED);
 
 	return 0;
 }
 
-#ifdef CONFIG_OMAP_32K_TIMER
+static struct of_device_id omap_counter_match[] __initdata = {
+	{ .compatible = "ti,omap-counter32k", },
+	{ }
+};
+
 /* Setup free-running counter for clocksource */
 static int __init omap2_sync32k_clocksource_init(void)
 {
 	int ret;
+	struct device_node *np = NULL;
 	struct omap_hwmod *oh;
 	void __iomem *vbase;
 	const char *oh_name = "counter_32k";
 
+	/*
+	 * If device-tree is present, then search the DT blob
+	 * to see if the 32kHz counter is supported.
+	 */
+	if (of_have_populated_dt()) {
+		np = omap_get_timer_dt(omap_counter_match, NULL);
+		if (!np)
+			return -ENODEV;
+
+		of_property_read_string_index(np, "ti,hwmods", 0, &oh_name);
+		if (!oh_name)
+			return -ENODEV;
+	}
+
 	/*
 	 * First check hwmod data is available for sync32k counter
 	 */
@@ -288,7 +423,13 @@ static int __init omap2_sync32k_clocksource_init(void)
 
 	omap_hwmod_setup_one(oh_name);
 
-	vbase = omap_hwmod_get_mpu_rt_va(oh);
+	if (np) {
+		vbase = of_iomap(np, 0);
+		of_node_put(np);
+	} else {
+		vbase = omap_hwmod_get_mpu_rt_va(oh);
+	}
+
 	if (!vbase) {
 		pr_warn("%s: failed to get counter_32k resource\n", __func__);
 		return -ENXIO;
@@ -310,23 +451,21 @@ static int __init omap2_sync32k_clocksource_init(void)
 
 	return ret;
 }
-#else
-static inline int omap2_sync32k_clocksource_init(void)
-{
-	return -ENODEV;
-}
-#endif
 
 static void __init omap2_gptimer_clocksource_init(int gptimer_id,
 						const char *fck_source)
 {
 	int res;
 
-	res = omap_dm_timer_init_one(&clksrc, gptimer_id, fck_source);
+	clksrc.errata = omap_dm_timer_get_errata();
+
+	res = omap_dm_timer_init_one(&clksrc, gptimer_id, fck_source, NULL,
+				     OMAP_TIMER_NONPOSTED);
 	BUG_ON(res);
 
 	__omap_dm_timer_load_start(&clksrc,
-			OMAP_TIMER_CTRL_ST | OMAP_TIMER_CTRL_AR, 0, 1);
+				   OMAP_TIMER_CTRL_ST | OMAP_TIMER_CTRL_AR, 0,
+				   OMAP_TIMER_NONPOSTED);
 	setup_sched_clock(dmtimer_read_sched_clock, 32, clksrc.rate);
 
 	if (clocksource_register_hz(&clocksource_gpt, clksrc.rate))
@@ -337,25 +476,6 @@ static void __init omap2_gptimer_clocksource_init(int gptimer_id,
 			gptimer_id, clksrc.rate);
 }
 
-static void __init omap2_clocksource_init(int gptimer_id,
-						const char *fck_source)
-{
-	/*
-	 * First give preference to kernel parameter configuration
-	 * by user (clocksource="gp_timer").
-	 *
-	 * In case of missing kernel parameter for clocksource,
-	 * first check for availability for 32k-sync timer, in case
-	 * of failure in finding 32k_counter module or registering
-	 * it as clocksource, execution will fallback to gp-timer.
-	 */
-	if (use_gptimer_clksrc == true)
-		omap2_gptimer_clocksource_init(gptimer_id, fck_source);
-	else if (omap2_sync32k_clocksource_init())
-		/* Fall back to gp-timer code */
-		omap2_gptimer_clocksource_init(gptimer_id, fck_source);
-}
-
 #ifdef CONFIG_SOC_HAS_REALTIME_COUNTER
 /*
  * The realtime counter also called master counter, is a free-running
@@ -434,48 +554,65 @@ static inline void __init realtime_counter_init(void)
 {}
 #endif
 
-#define OMAP_SYS_TIMER_INIT(name, clkev_nr, clkev_src,			\
+#define OMAP_SYS_GP_TIMER_INIT(name, clkev_nr, clkev_src, clkev_prop,	\
+			       clksrc_nr, clksrc_src)			\
+static void __init omap##name##_gptimer_timer_init(void)		\
+{									\
+	omap_dmtimer_init();						\
+	omap2_gp_clockevent_init((clkev_nr), clkev_src, clkev_prop);	\
+	omap2_gptimer_clocksource_init((clksrc_nr), clksrc_src);	\
+}
+
+#define OMAP_SYS_32K_TIMER_INIT(name, clkev_nr, clkev_src, clkev_prop,	\
 				clksrc_nr, clksrc_src)			\
-static void __init omap##name##_timer_init(void)			\
+static void __init omap##name##_sync32k_timer_init(void)		\
 {									\
-	omap2_gp_clockevent_init((clkev_nr), clkev_src);		\
-	omap2_clocksource_init((clksrc_nr), clksrc_src);		\
+	omap_dmtimer_init();						\
+	omap2_gp_clockevent_init((clkev_nr), clkev_src, clkev_prop);	\
+	/* Enable the use of clocksource="gp_timer" kernel parameter */	\
+	if (use_gptimer_clksrc)						\
+		omap2_gptimer_clocksource_init((clksrc_nr), clksrc_src);\
+	else								\
+		omap2_sync32k_clocksource_init();			\
 }
 
-#define OMAP_SYS_TIMER(name)						\
+#define OMAP_SYS_TIMER(name, clksrc)					\
 struct sys_timer omap##name##_timer = {					\
-	.init	= omap##name##_timer_init,				\
+	.init	= omap##name##_##clksrc##_timer_init,			\
 };
 
 #ifdef CONFIG_ARCH_OMAP2
-OMAP_SYS_TIMER_INIT(2, 1, OMAP2_CLKEV_SOURCE, 2, OMAP2_MPU_SOURCE)
-OMAP_SYS_TIMER(2)
-#endif
+OMAP_SYS_32K_TIMER_INIT(2, 1, OMAP2_32K_SOURCE, "ti,timer-alwon",
+			2, OMAP2_MPU_SOURCE);
+OMAP_SYS_TIMER(2, sync32k);
+#endif /* CONFIG_ARCH_OMAP2 */
 
 #ifdef CONFIG_ARCH_OMAP3
-OMAP_SYS_TIMER_INIT(3, 1, OMAP3_CLKEV_SOURCE, 2, OMAP3_MPU_SOURCE)
-OMAP_SYS_TIMER(3)
-OMAP_SYS_TIMER_INIT(3_secure, OMAP3_SECURE_TIMER, OMAP3_CLKEV_SOURCE,
-			2, OMAP3_MPU_SOURCE)
-OMAP_SYS_TIMER(3_secure)
-#endif
+OMAP_SYS_32K_TIMER_INIT(3, 1, OMAP3_32K_SOURCE, "ti,timer-alwon",
+			2, OMAP3_MPU_SOURCE);
+OMAP_SYS_TIMER(3, sync32k);
+OMAP_SYS_32K_TIMER_INIT(3_secure, 12, OMAP3_32K_SOURCE, "ti,timer-secure",
+			2, OMAP3_MPU_SOURCE);
+OMAP_SYS_TIMER(3_secure, sync32k);
+OMAP_SYS_GP_TIMER_INIT(3_gp, 1, OMAP3_MPU_SOURCE, "ti,timer-alwon",
+		       2, OMAP3_MPU_SOURCE);
+OMAP_SYS_TIMER(3_gp, gptimer);
+#endif /* CONFIG_ARCH_OMAP3 */
 
 #ifdef CONFIG_SOC_AM33XX
-OMAP_SYS_TIMER_INIT(3_am33xx, 1, OMAP4_MPU_SOURCE, 2, OMAP4_MPU_SOURCE)
-OMAP_SYS_TIMER(3_am33xx)
-#endif
+OMAP_SYS_GP_TIMER_INIT(3_am33xx, 1, OMAP4_MPU_SOURCE, "ti,timer-alwon",
+		       2, OMAP4_MPU_SOURCE);
+OMAP_SYS_TIMER(3_am33xx, gptimer);
+#endif /* CONFIG_SOC_AM33XX */
 
 #ifdef CONFIG_ARCH_OMAP4
+OMAP_SYS_32K_TIMER_INIT(4, 1, OMAP4_32K_SOURCE, "ti,timer-alwon",
+			2, OMAP4_MPU_SOURCE);
 #ifdef CONFIG_LOCAL_TIMERS
-static DEFINE_TWD_LOCAL_TIMER(twd_local_timer,
-			      OMAP44XX_LOCAL_TWD_BASE, 29);
-#endif
-
-static void __init omap4_timer_init(void)
+static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, OMAP44XX_LOCAL_TWD_BASE, 29);
+static void __init omap4_local_timer_init(void)
 {
-	omap2_gp_clockevent_init(1, OMAP4_CLKEV_SOURCE);
-	omap2_clocksource_init(2, OMAP4_MPU_SOURCE);
-#ifdef CONFIG_LOCAL_TIMERS
+	omap4_sync32k_timer_init();
 	/* Local timers are not supprted on OMAP4430 ES1.0 */
 	if (omap_rev() != OMAP4430_REV_ES1_0) {
 		int err;
@@ -489,26 +626,32 @@ static void __init omap4_timer_init(void)
 		if (err)
 			pr_err("twd_local_timer_register failed %d\n", err);
 	}
-#endif
 }
-OMAP_SYS_TIMER(4)
-#endif
+#else /* CONFIG_LOCAL_TIMERS */
+static inline void omap4_local_timer_init(void)
+{
+	omap4_sync32_timer_init();
+}
+#endif /* CONFIG_LOCAL_TIMERS */
+OMAP_SYS_TIMER(4, local);
+#endif /* CONFIG_ARCH_OMAP4 */
 
 #ifdef CONFIG_SOC_OMAP5
-static void __init omap5_timer_init(void)
+OMAP_SYS_32K_TIMER_INIT(5, 1, OMAP4_32K_SOURCE, "ti,timer-alwon",
+			2, OMAP4_MPU_SOURCE);
+static void __init omap5_realtime_timer_init(void)
 {
 	int err;
 
-	omap2_gp_clockevent_init(1, OMAP4_CLKEV_SOURCE);
-	omap2_clocksource_init(2, OMAP4_MPU_SOURCE);
+	omap5_sync32k_timer_init();
 	realtime_counter_init();
 
 	err = arch_timer_of_register();
 	if (err)
 		pr_err("%s: arch_timer_register failed %d\n", __func__, err);
 }
-OMAP_SYS_TIMER(5)
-#endif
+OMAP_SYS_TIMER(5, realtime);
+#endif /* CONFIG_SOC_OMAP5 */
 
 /**
  * omap_timer_init - build and register timer device with an
@@ -560,6 +703,7 @@ static int __init omap_timer_init(struct omap_hwmod *oh, void *unused)
 	if (timer_dev_attr)
 		pdata->timer_capability = timer_dev_attr->timer_capability;
 
+	pdata->timer_errata = omap_dm_timer_get_errata();
 	pdata->get_context_loss_count = omap_pm_get_dev_context_loss_count;
 
 	pdev = omap_device_build(name, id, oh, pdata, sizeof(*pdata),
@@ -586,6 +730,10 @@ static int __init omap2_dm_timer_init(void)
 {
 	int ret;
 
+	/* If dtb is there, the devices will be created dynamically */
+	if (of_have_populated_dt())
+		return -ENODEV;
+
 	ret = omap_hwmod_for_each_by_class("timer", omap_timer_init, NULL);
 	if (unlikely(ret)) {
 		pr_err("%s: device registration failed.\n", __func__);

arch/arm/plat-omap/Kconfig

@@ -154,6 +154,12 @@ config OMAP_32K_TIMER
 	  intra-tick resolution than OMAP_MPU_TIMER. The 32KHz timer is
 	  currently only available for OMAP16XX, 24XX, 34XX and OMAP4/5.
 
+	  On OMAP2PLUS this value is only used for CONFIG_HZ and
+	  CLOCK_TICK_RATE compile time calculation.
+	  The actual timer selection is done in the board file
+	  through the (DT_)MACHINE_START structure.
+
+
 config OMAP3_L2_AUX_SECURE_SAVE_RESTORE
 	bool "OMAP3 HS/EMU save and restore for L2 AUX control register"
 	depends on ARCH_OMAP3 && PM

arch/arm/plat-omap/dmtimer.c

@@ -35,11 +35,16 @@
  * 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
+#include <linux/clk.h>
 #include <linux/module.h>
 #include <linux/io.h>
 #include <linux/device.h>
 #include <linux/err.h>
 #include <linux/pm_runtime.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/platform_data/dmtimer-omap.h>
 
 #include <plat/dmtimer.h>
 
@@ -81,10 +86,6 @@ static void omap_dm_timer_write_reg(struct omap_dm_timer *timer, u32 reg,
 
 static void omap_timer_restore_context(struct omap_dm_timer *timer)
 {
-	if (timer->revision == 1)
-		__raw_writel(timer->context.tistat, timer->sys_stat);
-
-	__raw_writel(timer->context.tisr, timer->irq_stat);
 	omap_dm_timer_write_reg(timer, OMAP_TIMER_WAKEUP_EN_REG,
 				timer->context.twer);
 	omap_dm_timer_write_reg(timer, OMAP_TIMER_COUNTER_REG,
@@ -100,39 +101,38 @@ static void omap_timer_restore_context(struct omap_dm_timer *timer)
 				timer->context.tclr);
 }
 
-static void omap_dm_timer_wait_for_reset(struct omap_dm_timer *timer)
+static int omap_dm_timer_reset(struct omap_dm_timer *timer)
 {
-	int c;
+	u32 l, timeout = 100000;
 
-	if (!timer->sys_stat)
-		return;
+	if (timer->revision != 1)
+		return -EINVAL;
 
-	c = 0;
-	while (!(__raw_readl(timer->sys_stat) & 1)) {
-		c++;
-		if (c > 100000) {
-			printk(KERN_ERR "Timer failed to reset\n");
-			return;
-		}
-	}
-}
+	omap_dm_timer_write_reg(timer, OMAP_TIMER_IF_CTRL_REG, 0x06);
 
-static void omap_dm_timer_reset(struct omap_dm_timer *timer)
-{
-	omap_dm_timer_enable(timer);
-	if (timer->pdev->id != 1) {
-		omap_dm_timer_write_reg(timer, OMAP_TIMER_IF_CTRL_REG, 0x06);
-		omap_dm_timer_wait_for_reset(timer);
+	do {
+		l = __omap_dm_timer_read(timer,
+					 OMAP_TIMER_V1_SYS_STAT_OFFSET, 0);
+	} while (!l && timeout--);
+
+	if (!timeout) {
+		dev_err(&timer->pdev->dev, "Timer failed to reset\n");
+		return -ETIMEDOUT;
 	}
 
-	__omap_dm_timer_reset(timer, 0, 0);
-	omap_dm_timer_disable(timer);
-	timer->posted = 1;
+	/* Configure timer for smart-idle mode */
+	l = __omap_dm_timer_read(timer, OMAP_TIMER_OCP_CFG_OFFSET, 0);
+	l |= 0x2 << 0x3;
+	__omap_dm_timer_write(timer, OMAP_TIMER_OCP_CFG_OFFSET, l, 0);
+
+	timer->posted = 0;
+
+	return 0;
 }
 
-int omap_dm_timer_prepare(struct omap_dm_timer *timer)
+static int omap_dm_timer_prepare(struct omap_dm_timer *timer)
 {
-	int ret;
+	int rc;
 
 	/*
 	 * FIXME: OMAP1 devices do not use the clock framework for dmtimers so
@@ -147,13 +147,20 @@ int omap_dm_timer_prepare(struct omap_dm_timer *timer)
 		}
 	}
 
-	if (timer->capability & OMAP_TIMER_NEEDS_RESET)
-		omap_dm_timer_reset(timer);
+	omap_dm_timer_enable(timer);
+
+	if (timer->capability & OMAP_TIMER_NEEDS_RESET) {
+		rc = omap_dm_timer_reset(timer);
+		if (rc) {
+			omap_dm_timer_disable(timer);
+			return rc;
+		}
+	}
 
-	ret = omap_dm_timer_set_source(timer, OMAP_TIMER_SRC_32_KHZ);
+	__omap_dm_timer_enable_posted(timer);
+	omap_dm_timer_disable(timer);
 
-	timer->posted = 1;
-	return ret;
+	return omap_dm_timer_set_source(timer, OMAP_TIMER_SRC_32_KHZ);
 }
 
 static inline u32 omap_dm_timer_reserved_systimer(int id)
@@ -209,6 +216,13 @@ struct omap_dm_timer *omap_dm_timer_request_specific(int id)
 	unsigned long flags;
 	int ret = 0;
 
+	/* Requesting timer by ID is not supported when device tree is used */
+	if (of_have_populated_dt()) {
+		pr_warn("%s: Please use omap_dm_timer_request_by_cap()\n",
+			__func__);
+		return NULL;
+	}
+
 	spin_lock_irqsave(&dm_timer_lock, flags);
 	list_for_each_entry(t, &omap_timer_list, node) {
 		if (t->pdev->id == id && !t->reserved) {
@@ -234,6 +248,58 @@ struct omap_dm_timer *omap_dm_timer_request_specific(int id)
 }
 EXPORT_SYMBOL_GPL(omap_dm_timer_request_specific);
 
+/**
+ * omap_dm_timer_request_by_cap - Request a timer by capability
+ * @cap:	Bit mask of capabilities to match
+ *
+ * Find a timer based upon capabilities bit mask. Callers of this function
+ * should use the definitions found in the plat/dmtimer.h file under the
+ * comment "timer capabilities used in hwmod database". Returns pointer to
+ * timer handle on success and a NULL pointer on failure.
+ */
+struct omap_dm_timer *omap_dm_timer_request_by_cap(u32 cap)
+{
+	struct omap_dm_timer *timer = NULL, *t;
+	unsigned long flags;
+
+	if (!cap)
+		return NULL;
+
+	spin_lock_irqsave(&dm_timer_lock, flags);
+	list_for_each_entry(t, &omap_timer_list, node) {
+		if ((!t->reserved) && ((t->capability & cap) == cap)) {
+			/*
+			 * If timer is not NULL, we have already found one timer
+			 * but it was not an exact match because it had more
+			 * capabilites that what was required. Therefore,
+			 * unreserve the last timer found and see if this one
+			 * is a better match.
+			 */
+			if (timer)
+				timer->reserved = 0;
+
+			timer = t;
+			timer->reserved = 1;
+
+			/* Exit loop early if we find an exact match */
+			if (t->capability == cap)
+				break;
+		}
+	}
+	spin_unlock_irqrestore(&dm_timer_lock, flags);
+
+	if (timer && omap_dm_timer_prepare(timer)) {
+		timer->reserved = 0;
+		timer = NULL;
+	}
+
+	if (!timer)
+		pr_debug("%s: timer request failed!\n", __func__);
+
+	return timer;
+}
+EXPORT_SYMBOL_GPL(omap_dm_timer_request_by_cap);
+
 int omap_dm_timer_free(struct omap_dm_timer *timer)
 {
 	if (unlikely(!timer))
@@ -388,7 +454,6 @@ int omap_dm_timer_stop(struct omap_dm_timer *timer)
 	 */
 	timer->context.tclr =
 			omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
-	timer->context.tisr = __raw_readl(timer->irq_stat);
 	omap_dm_timer_disable(timer);
 	return 0;
 }
@@ -398,7 +463,7 @@ int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source)
 {
 	int ret;
 	char *parent_name = NULL;
-	struct clk *fclk, *parent;
+	struct clk *parent;
 	struct dmtimer_platform_data *pdata;
 
 	if (unlikely(!timer))
@@ -414,14 +479,11 @@ int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source)
 	 * use the clock framework to set the parent clock. To be removed
 	 * once OMAP1 migrated to using clock framework for dmtimers
 	 */
-	if (pdata->set_timer_src)
+	if (pdata && pdata->set_timer_src)
 		return pdata->set_timer_src(timer->pdev, source);
 
-	fclk = clk_get(&timer->pdev->dev, "fck");
-	if (IS_ERR_OR_NULL(fclk)) {
-		pr_err("%s: fck not found\n", __func__);
+	if (!timer->fclk)
 		return -EINVAL;
-	}
 
 	switch (source) {
 	case OMAP_TIMER_SRC_SYS_CLK:
@@ -440,18 +502,15 @@ int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source)
 	parent = clk_get(&timer->pdev->dev, parent_name);
 	if (IS_ERR_OR_NULL(parent)) {
 		pr_err("%s: %s not found\n", __func__, parent_name);
-		ret = -EINVAL;
-		goto out;
+		return -EINVAL;
 	}
 
-	ret = clk_set_parent(fclk, parent);
+	ret = clk_set_parent(timer->fclk, parent);
 	if (IS_ERR_VALUE(ret))
 		pr_err("%s: failed to set %s as parent\n", __func__,
 			parent_name);
 
 	clk_put(parent);
-out:
-	clk_put(fclk);
 
 	return ret;
 }
@@ -534,8 +593,8 @@ int omap_dm_timer_set_match(struct omap_dm_timer *timer, int enable,
 		l |= OMAP_TIMER_CTRL_CE;
 	else
 		l &= ~OMAP_TIMER_CTRL_CE;
-	omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
 	omap_dm_timer_write_reg(timer, OMAP_TIMER_MATCH_REG, match);
+	omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
 
 	/* Save the context */
 	timer->context.tclr = l;
@@ -611,6 +670,37 @@ int omap_dm_timer_set_int_enable(struct omap_dm_timer *timer,
 }
 EXPORT_SYMBOL_GPL(omap_dm_timer_set_int_enable);
 
+/**
+ * omap_dm_timer_set_int_disable - disable timer interrupts
+ * @timer:	pointer to timer handle
+ * @mask:	bit mask of interrupts to be disabled
+ *
+ * Disables the specified timer interrupts for a timer.
+ */
+int omap_dm_timer_set_int_disable(struct omap_dm_timer *timer, u32 mask)
+{
+	u32 l = mask;
+
+	if (unlikely(!timer))
+		return -EINVAL;
+
+	omap_dm_timer_enable(timer);
+
+	if (timer->revision == 1)
+		l = __raw_readl(timer->irq_ena) & ~mask;
+
+	__raw_writel(l, timer->irq_dis);
+	l = omap_dm_timer_read_reg(timer, OMAP_TIMER_WAKEUP_EN_REG) & ~mask;
+	omap_dm_timer_write_reg(timer, OMAP_TIMER_WAKEUP_EN_REG, l);
+
+	/* Save the context */
+	timer->context.tier &= ~mask;
+	timer->context.twer &= ~mask;
+	omap_dm_timer_disable(timer);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(omap_dm_timer_set_int_disable);
+
 unsigned int omap_dm_timer_read_status(struct omap_dm_timer *timer)
 {
 	unsigned int l;
@@ -632,8 +722,7 @@ int omap_dm_timer_write_status(struct omap_dm_timer *timer, unsigned int value)
 		return -EINVAL;
 
 	__omap_dm_timer_write_status(timer, value);
-	/* Save the context */
-	timer->context.tisr = value;
+
 	return 0;
 }
 EXPORT_SYMBOL_GPL(omap_dm_timer_write_status);
@@ -696,7 +785,7 @@ static int __devinit omap_dm_timer_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	struct dmtimer_platform_data *pdata = pdev->dev.platform_data;
 
-	if (!pdata) {
+	if (!pdata && !dev->of_node) {
 		dev_err(dev, "%s: no platform data.\n", __func__);
 		return -ENODEV;
 	}
@@ -725,12 +814,25 @@ static int __devinit omap_dm_timer_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	}
 
-	timer->id = pdev->id;
+	if (dev->of_node) {
+		if (of_find_property(dev->of_node, "ti,timer-alwon", NULL))
+			timer->capability |= OMAP_TIMER_ALWON;
+		if (of_find_property(dev->of_node, "ti,timer-dsp", NULL))
+			timer->capability |= OMAP_TIMER_HAS_DSP_IRQ;
+		if (of_find_property(dev->of_node, "ti,timer-pwm", NULL))
+			timer->capability |= OMAP_TIMER_HAS_PWM;
+		if (of_find_property(dev->of_node, "ti,timer-secure", NULL))
+			timer->capability |= OMAP_TIMER_SECURE;
+	} else {
+		timer->id = pdev->id;
+		timer->errata = pdata->timer_errata;
+		timer->capability = pdata->timer_capability;
+		timer->reserved = omap_dm_timer_reserved_systimer(timer->id);
+		timer->get_context_loss_count = pdata->get_context_loss_count;
+	}
+
 	timer->irq = irq->start;
-	timer->reserved = omap_dm_timer_reserved_systimer(timer->id);
 	timer->pdev = pdev;
-	timer->capability = pdata->timer_capability;
-	timer->get_context_loss_count = pdata->get_context_loss_count;
 
 	/* Skip pm_runtime_enable for OMAP1 */
 	if (!(timer->capability & OMAP_TIMER_NEEDS_RESET)) {
@@ -770,7 +872,8 @@ static int __devexit omap_dm_timer_remove(struct platform_device *pdev)
 
 	spin_lock_irqsave(&dm_timer_lock, flags);
 	list_for_each_entry(timer, &omap_timer_list, node)
-		if (timer->pdev->id == pdev->id) {
+		if (!strcmp(dev_name(&timer->pdev->dev),
+			    dev_name(&pdev->dev))) {
 			list_del(&timer->node);
 			ret = 0;
 			break;
@@ -780,11 +883,18 @@ static int __devexit omap_dm_timer_remove(struct platform_device *pdev)
 	return ret;
 }
 
+static const struct of_device_id omap_timer_match[] = {
+	{ .compatible = "ti,omap2-timer", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, omap_timer_match);
+
 static struct platform_driver omap_dm_timer_driver = {
 	.probe  = omap_dm_timer_probe,
 	.remove = __devexit_p(omap_dm_timer_remove),
 	.driver = {
 		.name   = "omap_timer",
+		.of_match_table = of_match_ptr(omap_timer_match),
 	},
 };
 

arch/arm/plat-omap/include/plat/dmtimer.h

@@ -32,7 +32,6 @@
  * 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
-#include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/io.h>
 #include <linux/platform_device.h>
@@ -55,6 +54,10 @@
 #define OMAP_TIMER_TRIGGER_OVERFLOW		0x01
 #define OMAP_TIMER_TRIGGER_OVERFLOW_AND_COMPARE	0x02
 
+/* posted mode types */
+#define OMAP_TIMER_NONPOSTED			0x00
+#define OMAP_TIMER_POSTED			0x01
+
 /* timer capabilities used in hwmod database */
 #define OMAP_TIMER_SECURE				0x80000000
 #define OMAP_TIMER_ALWON				0x40000000
@@ -62,16 +65,22 @@
 #define OMAP_TIMER_NEEDS_RESET				0x10000000
 #define OMAP_TIMER_HAS_DSP_IRQ				0x08000000
 
+/*
+ * timer errata flags
+ *
+ * Errata i103/i767 impacts all OMAP3/4/5 devices including AM33xx. This
+ * errata prevents us from using posted mode on these devices, unless the
+ * timer counter register is never read. For more details please refer to
+ * the OMAP3/4/5 errata documents.
+ */
+#define OMAP_TIMER_ERRATA_I103_I767			0x80000000
+
 struct omap_timer_capability_dev_attr {
 	u32 timer_capability;
 };
 
-struct omap_dm_timer;
-
 struct timer_regs {
 	u32 tidr;
-	u32 tistat;
-	u32 tisr;
 	u32 tier;
 	u32 twer;
 	u32 tclr;
@@ -90,16 +99,35 @@ struct timer_regs {
 	u32 towr;
 };
 
-struct dmtimer_platform_data {
-	/* set_timer_src - Only used for OMAP1 devices */
-	int (*set_timer_src)(struct platform_device *pdev, int source);
-	u32 timer_capability;
+struct omap_dm_timer {
+	int id;
+	int irq;
+	struct clk *fclk;
+
+	void __iomem	*io_base;
+	void __iomem	*irq_stat;	/* TISR/IRQSTATUS interrupt status */
+	void __iomem	*irq_ena;	/* irq enable */
+	void __iomem	*irq_dis;	/* irq disable, only on v2 ip */
+	void __iomem	*pend;		/* write pending */
+	void __iomem	*func_base;	/* function register base */
+
+	unsigned long rate;
+	unsigned reserved:1;
+	unsigned posted:1;
+	struct timer_regs context;
 	int (*get_context_loss_count)(struct device *);
+	int ctx_loss_count;
+	int revision;
+	u32 capability;
+	u32 errata;
+	struct platform_device *pdev;
+	struct list_head node;
 };
 
 int omap_dm_timer_reserve_systimer(int id);
 struct omap_dm_timer *omap_dm_timer_request(void);
 struct omap_dm_timer *omap_dm_timer_request_specific(int timer_id);
+struct omap_dm_timer *omap_dm_timer_request_by_cap(u32 cap);
 int omap_dm_timer_free(struct omap_dm_timer *timer);
 void omap_dm_timer_enable(struct omap_dm_timer *timer);
 void omap_dm_timer_disable(struct omap_dm_timer *timer);
@@ -121,6 +149,7 @@ int omap_dm_timer_set_pwm(struct omap_dm_timer *timer, int def_on, int toggle, i
 int omap_dm_timer_set_prescaler(struct omap_dm_timer *timer, int prescaler);
 
 int omap_dm_timer_set_int_enable(struct omap_dm_timer *timer, unsigned int value);
+int omap_dm_timer_set_int_disable(struct omap_dm_timer *timer, u32 mask);
 
 unsigned int omap_dm_timer_read_status(struct omap_dm_timer *timer);
 int omap_dm_timer_write_status(struct omap_dm_timer *timer, unsigned int value);
@@ -246,34 +275,6 @@ int omap_dm_timers_active(void);
 #define OMAP_TIMER_TICK_INT_MASK_COUNT_REG				\
 		(_OMAP_TIMER_TICK_INT_MASK_COUNT_OFFSET | (WP_TOWR << WPSHIFT))
 
-struct omap_dm_timer {
-	unsigned long phys_base;
-	int id;
-	int irq;
-	struct clk *fclk;
-
-	void __iomem	*io_base;
-	void __iomem	*sys_stat;	/* TISTAT timer status */
-	void __iomem	*irq_stat;	/* TISR/IRQSTATUS interrupt status */
-	void __iomem	*irq_ena;	/* irq enable */
-	void __iomem	*irq_dis;	/* irq disable, only on v2 ip */
-	void __iomem	*pend;		/* write pending */
-	void __iomem	*func_base;	/* function register base */
-
-	unsigned long rate;
-	unsigned reserved:1;
-	unsigned posted:1;
-	struct timer_regs context;
-	int (*get_context_loss_count)(struct device *);
-	int ctx_loss_count;
-	int revision;
-	u32 capability;
-	struct platform_device *pdev;
-	struct list_head node;
-};
-
-int omap_dm_timer_prepare(struct omap_dm_timer *timer);
-
 static inline u32 __omap_dm_timer_read(struct omap_dm_timer *timer, u32 reg,
 						int posted)
 {
@@ -302,16 +303,13 @@ static inline void __omap_dm_timer_init_regs(struct omap_dm_timer *timer)
 	tidr = __raw_readl(timer->io_base);
 	if (!(tidr >> 16)) {
 		timer->revision = 1;
-		timer->sys_stat = timer->io_base +
-				OMAP_TIMER_V1_SYS_STAT_OFFSET;
 		timer->irq_stat = timer->io_base + OMAP_TIMER_V1_STAT_OFFSET;
 		timer->irq_ena = timer->io_base + OMAP_TIMER_V1_INT_EN_OFFSET;
-		timer->irq_dis = NULL;
+		timer->irq_dis = timer->io_base + OMAP_TIMER_V1_INT_EN_OFFSET;
 		timer->pend = timer->io_base + _OMAP_TIMER_WRITE_PEND_OFFSET;
 		timer->func_base = timer->io_base;
 	} else {
 		timer->revision = 2;
-		timer->sys_stat = NULL;
 		timer->irq_stat = timer->io_base + OMAP_TIMER_V2_IRQSTATUS;
 		timer->irq_ena = timer->io_base + OMAP_TIMER_V2_IRQENABLE_SET;
 		timer->irq_dis = timer->io_base + OMAP_TIMER_V2_IRQENABLE_CLR;
@@ -322,45 +320,44 @@ static inline void __omap_dm_timer_init_regs(struct omap_dm_timer *timer)
 	}
 }
 
-/* Assumes the source clock has been set by caller */
-static inline void __omap_dm_timer_reset(struct omap_dm_timer *timer,
-					int autoidle, int wakeup)
+/*
+ * __omap_dm_timer_enable_posted - enables write posted mode
+ * @timer:      pointer to timer instance handle
+ *
+ * Enables the write posted mode for the timer. When posted mode is enabled
+ * writes to certain timer registers are immediately acknowledged by the
+ * internal bus and hence prevents stalling the CPU waiting for the write to
+ * complete. Enabling this feature can improve performance for writing to the
+ * timer registers.
+ */
+static inline void __omap_dm_timer_enable_posted(struct omap_dm_timer *timer)
 {
-	u32 l;
+	if (timer->posted)
+		return;
 
-	l = __raw_readl(timer->io_base + OMAP_TIMER_OCP_CFG_OFFSET);
-	l |= 0x02 << 3;  /* Set to smart-idle mode */
-	l |= 0x2 << 8;   /* Set clock activity to perserve f-clock on idle */
+	if (timer->errata & OMAP_TIMER_ERRATA_I103_I767)
+		return;
 
-	if (autoidle)
-		l |= 0x1 << 0;
-
-	if (wakeup)
-		l |= 1 << 2;
-
-	__raw_writel(l, timer->io_base + OMAP_TIMER_OCP_CFG_OFFSET);
-
-	/* Match hardware reset default of posted mode */
 	__omap_dm_timer_write(timer, OMAP_TIMER_IF_CTRL_REG,
-					OMAP_TIMER_CTRL_POSTED, 0);
+			      OMAP_TIMER_CTRL_POSTED, 0);
+	timer->context.tsicr = OMAP_TIMER_CTRL_POSTED;
+	timer->posted = OMAP_TIMER_POSTED;
 }
 
-static inline int __omap_dm_timer_set_source(struct clk *timer_fck,
-						struct clk *parent)
+/**
+ * __omap_dm_timer_override_errata - override errata flags for a timer
+ * @timer:      pointer to timer handle
+ * @errata:	errata flags to be ignored
+ *
+ * For a given timer, override a timer errata by clearing the flags
+ * specified by the errata argument. A specific erratum should only be
+ * overridden for a timer if the timer is used in such a way the erratum
+ * has no impact.
+ */
+static inline void __omap_dm_timer_override_errata(struct omap_dm_timer *timer,
+						   u32 errata)
 {
-	int ret;
-
-	clk_disable(timer_fck);
-	ret = clk_set_parent(timer_fck, parent);
-	clk_enable(timer_fck);
-
-	/*
-	 * When the functional clock disappears, too quick writes seem
-	 * to cause an abort. XXX Is this still necessary?
-	 */
-	__delay(300000);
-
-	return ret;
+	timer->errata &= ~errata;
 }
 
 static inline void __omap_dm_timer_stop(struct omap_dm_timer *timer,

drivers/staging/tidspbridge/core/ue_deh.c

@@ -19,7 +19,6 @@
 
 #include <linux/kernel.h>
 #include <linux/interrupt.h>
-#include <plat/dmtimer.h>
 
 #include <dspbridge/dbdefs.h>
 #include <dspbridge/dspdeh.h>

include/linux/platform_data/dmtimer-omap.h

@@ -0,0 +1,31 @@
+/*
+ * DMTIMER platform data for TI OMAP platforms
+ *
+ * Copyright (C) 2012 Texas Instruments
+ * Author: Jon Hunter <jon-hunter@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __PLATFORM_DATA_DMTIMER_OMAP_H__
+#define __PLATFORM_DATA_DMTIMER_OMAP_H__
+
+struct dmtimer_platform_data {
+	/* set_timer_src - Only used for OMAP1 devices */
+	int (*set_timer_src)(struct platform_device *pdev, int source);
+	u32 timer_capability;
+	u32 timer_errata;
+	int (*get_context_loss_count)(struct device *);
+};
+
+#endif /* __PLATFORM_DATA_DMTIMER_OMAP_H__ */