ARM: nomadik: add the new clocks to the device tree

This revamps the device tree to fit with the new clock
implementation and brings it quite a bit closer to how
the hardware actually works.

After this the clock implementation knows about all
clock gates and will gate off all unused clocks at
boot time and save a bit of power.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

arch/arm/boot/dts/ste-nomadik-s8815.dts

@@ -14,6 +14,12 @@
 		bootargs = "root=/dev/ram0 console=ttyAMA1,115200n8 earlyprintk";
 	};
 
+	src@101e0000 {
+		/* These chrystal drivers are not used on this board */
+		disable-sxtalo;
+		disable-mxtalo;
+	};
+
 	pinctrl {
 		/* Hog CD pins */
 		pinctrl-names = "default";

arch/arm/boot/dts/ste-nomadik-stn8815.dtsi

@@ -168,37 +168,464 @@
 	src: src@101e0000 {
 		compatible = "stericsson,nomadik-src";
 		reg = <0x101e0000 0x1000>;
-		clocks {
-			/*
-			 * Dummy clock for primecells
-			 */
-			pclk: pclk@0 {
-				#clock-cells = <0>;
-				compatible = "fixed-clock";
-				clock-frequency = <0>;
-			};
-			/*
-			 * The 2.4 MHz TIMCLK reference clock is active at
-			 * boot time, this is actually the MXTALCLK @19.2 MHz
-			 * divided by 8. This clock is used by the timers and
-			 * watchdog. See page 105 ff.
-			 */
-			timclk: timclk@2.4M {
-				#clock-cells = <0>;
-				compatible = "fixed-clock";
-				clock-frequency = <2400000>;
-			};
-			/*
-			 * At boot time, PLL2 is set to generate a set of
-			 * fixed clocks, one of them is CLK48, the 48 MHz
-			 * clock, routed to the UART, MMC/SD, I2C, IrDA,
-			 * USB and SSP blocks.
-			 */
-			clk48: clk48@48M {
-				#clock-cells = <0>;
-				compatible = "fixed-clock";
-				clock-frequency = <48000000>;
-			};
+		disable-sxtalo;
+		disable-mxtalo;
+
+		/*
+		 * MXTAL "Main Chrystal" is a chrystal oscillator @19.2 MHz
+		 * that is parent of TIMCLK, PLL1 and PLL2
+		 */
+		mxtal: mxtal@19.2M {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <19200000>;
+		};
+
+		/*
+		 * The 2.4 MHz TIMCLK reference clock is active at
+		 * boot time, this is actually the MXTALCLK @19.2 MHz
+		 * divided by 8. This clock is used by the timers and
+		 * watchdog. See page 105 ff.
+		 */
+		timclk: timclk@2.4M {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clock-div = <8>;
+			clock-mult = <1>;
+			clocks = <&mxtal>;
+		};
+
+		/* PLL1 is locked to MXTALI and variable from 20.4 to 334 MHz */
+		pll1: pll1@0 {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-pll-clock";
+			pll-id = <1>;
+			clocks = <&mxtal>;
+		};
+
+		/* HCLK divides the PLL1 with 1,2,3 or 4 */
+		hclk: hclk@0 {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-hclk-clock";
+			clocks = <&pll1>;
+		};
+		/* The PCLK domain uses HCLK right off */
+		pclk: pclk@0 {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clock-div = <1>;
+			clock-mult = <1>;
+			clocks = <&hclk>;
+		};
+
+		/* PLL2 is usually 864 MHz and divided into a few fixed rates */
+		pll2: pll2@0 {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-pll-clock";
+			pll-id = <2>;
+			clocks = <&mxtal>;
+		};
+		clk216: clk216@216M {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clock-div = <4>;
+			clock-mult = <1>;
+			clocks = <&pll2>;
+		};
+		clk108: clk108@108M {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clock-div = <2>;
+			clock-mult = <1>;
+			clocks = <&clk216>;
+		};
+		clk72: clk72@72M {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			/* The data sheet does not say how this is derived */
+			clock-div = <12>;
+			clock-mult = <1>;
+			clocks = <&pll2>;
+		};
+		clk48: clk48@48M {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			/* The data sheet does not say how this is derived */
+			clock-div = <18>;
+			clock-mult = <1>;
+			clocks = <&pll2>;
+		};
+		clk27: clk27@27M {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clock-div = <4>;
+			clock-mult = <1>;
+			clocks = <&clk108>;
+		};
+
+		/* This apparently exists as well */
+		ulpiclk: ulpiclk@60M {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <60000000>;
+		};
+
+		/*
+		 * IP AMBA bus clocks, driving the bus side of the
+		 * peripheral clocking, clock gates.
+		 */
+
+		hclkdma0: hclkdma0@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <0>;
+			clocks = <&hclk>;
+		};
+		hclksmc: hclksmc@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <1>;
+			clocks = <&hclk>;
+		};
+		hclksdram: hclksdram@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <2>;
+			clocks = <&hclk>;
+		};
+		hclkdma1: hclkdma1@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <3>;
+			clocks = <&hclk>;
+		};
+		hclkclcd: hclkclcd@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <4>;
+			clocks = <&hclk>;
+		};
+		pclkirda: pclkirda@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <5>;
+			clocks = <&pclk>;
+		};
+		pclkssp: pclkssp@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <6>;
+			clocks = <&pclk>;
+		};
+		pclkuart0: pclkuart0@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <7>;
+			clocks = <&pclk>;
+		};
+		pclksdi: pclksdi@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <8>;
+			clocks = <&pclk>;
+		};
+		pclki2c0: pclki2c0@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <9>;
+			clocks = <&pclk>;
+		};
+		pclki2c1: pclki2c1@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <10>;
+			clocks = <&pclk>;
+		};
+		pclkuart1: pclkuart1@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <11>;
+			clocks = <&pclk>;
+		};
+		pclkmsp0: pclkmsp0@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <12>;
+			clocks = <&pclk>;
+		};
+		hclkusb: hclkusb@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <13>;
+			clocks = <&hclk>;
+		};
+		hclkdif: hclkdif@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <14>;
+			clocks = <&hclk>;
+		};
+		hclksaa: hclksaa@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <15>;
+			clocks = <&hclk>;
+		};
+		hclksva: hclksva@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <16>;
+			clocks = <&hclk>;
+		};
+		pclkhsi: pclkhsi@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <17>;
+			clocks = <&pclk>;
+		};
+		pclkxti: pclkxti@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <18>;
+			clocks = <&pclk>;
+		};
+		pclkuart2: pclkuart2@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <19>;
+			clocks = <&pclk>;
+		};
+		pclkmsp1: pclkmsp1@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <20>;
+			clocks = <&pclk>;
+		};
+		pclkmsp2: pclkmsp2@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <21>;
+			clocks = <&pclk>;
+		};
+		pclkowm: pclkowm@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <22>;
+			clocks = <&pclk>;
+		};
+		hclkhpi: hclkhpi@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <23>;
+			clocks = <&hclk>;
+		};
+		pclkske: pclkske@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <24>;
+			clocks = <&pclk>;
+		};
+		pclkhsem: pclkhsem@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <25>;
+			clocks = <&pclk>;
+		};
+		hclk3d: hclk3d@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <26>;
+			clocks = <&hclk>;
+		};
+		hclkhash: hclkhash@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <27>;
+			clocks = <&hclk>;
+		};
+		hclkcryp: hclkcryp@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <28>;
+			clocks = <&hclk>;
+		};
+		pclkmshc: pclkmshc@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <29>;
+			clocks = <&pclk>;
+		};
+		hclkusbm: hclkusbm@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <30>;
+			clocks = <&hclk>;
+		};
+		hclkrng: hclkrng@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <31>;
+			clocks = <&hclk>;
+		};
+
+		/* IP kernel clocks */
+		clcdclk: clcdclk@0 {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <36>;
+			clocks = <&clk72 &clk48>;
+		};
+		irdaclk: irdaclk@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <37>;
+			clocks = <&clk48>;
+		};
+		sspiclk: sspiclk@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <38>;
+			clocks = <&clk48>;
+		};
+		uart0clk: uart0clk@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <39>;
+			clocks = <&clk48>;
+		};
+		sdiclk: sdiclk@48M {
+			/* Also called MCCLK in some documents */
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <40>;
+			clocks = <&clk48>;
+		};
+		i2c0clk: i2c0clk@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <41>;
+			clocks = <&clk48>;
+		};
+		i2c1clk: i2c1clk@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <42>;
+			clocks = <&clk48>;
+		};
+		uart1clk: uart1clk@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <43>;
+			clocks = <&clk48>;
+		};
+		mspclk0: mspclk0@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <44>;
+			clocks = <&clk48>;
+		};
+		usbclk: usbclk@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <45>;
+			clocks = <&clk48>; /* 48 MHz not ULPI */
+		};
+		difclk: difclk@72M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <46>;
+			clocks = <&clk72>;
+		};
+		ipi2cclk: ipi2cclk@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <47>;
+			clocks = <&clk48>; /* Guess */
+		};
+		ipbmcclk: ipbmcclk@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <48>;
+			clocks = <&clk48>; /* Guess */
+		};
+		hsiclkrx: hsiclkrx@216M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <49>;
+			clocks = <&clk216>;
+		};
+		hsiclktx: hsiclktx@108M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <50>;
+			clocks = <&clk108>;
+		};
+		uart2clk: uart2clk@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <51>;
+			clocks = <&clk48>;
+		};
+		mspclk1: mspclk1@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <52>;
+			clocks = <&clk48>;
+		};
+		mspclk2: mspclk2@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <53>;
+			clocks = <&clk48>;
+		};
+		owmclk: owmclk@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <54>;
+			clocks = <&clk48>; /* Guess */
+		};
+		skeclk: skeclk@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <56>;
+			clocks = <&clk48>; /* Guess */
+		};
+		x3dclk: x3dclk@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <58>;
+			clocks = <&clk48>; /* Guess */
+		};
+		pclkmsp3: pclkmsp3@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <59>;
+			clocks = <&pclk>;
+		};
+		mspclk3: mspclk3@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <60>;
+			clocks = <&clk48>;
+		};
+		mshcclk: mshcclk@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <61>;
+			clocks = <&clk48>; /* Guess */
+		};
+		usbmclk: usbmclk@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <62>;
+			/* Stated as "48 MHz not ULPI clock" */
+			clocks = <&clk48>;
+		};
+		rngcclk: rngcclk@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <63>;
+			clocks = <&clk48>; /* Guess */
 		};
 	};
 
@@ -212,7 +639,7 @@
 			<0x41000000 0x2000>,	/* NAND Base ADDR */
 			<0x40800000 0x2000>;	/* NAND Base CMD */
 		reg-names = "fsmc_regs", "nand_data", "nand_addr", "nand_cmd";
-		clocks = <&pclk>;
+		clocks = <&hclksmc>;
 		status = "okay";
 
 		partition@0 {
@@ -334,7 +761,7 @@
 			reg = <0x101fd000 0x1000>;
 			interrupt-parent = <&vica>;
 			interrupts = <12>;
-			clocks = <&clk48>, <&pclk>;
+			clocks = <&uart0clk>, <&pclkuart0>;
 			clock-names = "uartclk", "apb_pclk";
 			pinctrl-names = "default";
 			pinctrl-0 = <&uart0_default_mux>;
@@ -345,7 +772,7 @@
 			reg = <0x101fb000 0x1000>;
 			interrupt-parent = <&vica>;
 			interrupts = <17>;
-			clocks = <&clk48>, <&pclk>;
+			clocks = <&uart1clk>, <&pclkuart1>;
 			clock-names = "uartclk", "apb_pclk";
 			pinctrl-names = "default";
 			pinctrl-0 = <&uart1_default_mux>;
@@ -356,7 +783,7 @@
 			reg = <0x101f2000 0x1000>;
 			interrupt-parent = <&vica>;
 			interrupts = <28>;
-			clocks = <&clk48>, <&pclk>;
+			clocks = <&uart2clk>, <&pclkuart2>;
 			clock-names = "uartclk", "apb_pclk";
 			status = "disabled";
 		};
@@ -364,7 +791,7 @@
 		rng: rng@101b0000 {
 			compatible = "arm,primecell";
 			reg = <0x101b0000 0x1000>;
-			clocks = <&clk48>, <&pclk>;
+			clocks = <&rngcclk>, <&hclkrng>;
 			clock-names = "rng", "apb_pclk";
 		};
 
@@ -380,7 +807,7 @@
 		mmcsd: sdi@101f6000 {
 			compatible = "arm,pl18x", "arm,primecell";
 			reg = <0x101f6000 0x1000>;
-			clocks = <&clk48>, <&pclk>;
+			clocks = <&sdiclk>, <&pclksdi>;
 			clock-names = "mclk", "apb_pclk";
 			interrupt-parent = <&vica>;
 			interrupts = <22>;