rt2800: add rt2800_rx_filter_calibration procedure

Add procedure for both bands filter calibration and use it on individual
chipset init rfcsr subroutines.

Remove "Set back to initial state" code for 3290 since vendor driver
DPO_RT3290_LinuxSTA_V2600_20120508 does not include it.

Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

drivers/net/wireless/rt2x00/rt2800lib.c

@@ -4332,8 +4332,8 @@ static int rt2800_init_bbp(struct rt2x00_dev *rt2x00dev)
 	return 0;
 }
 
-static u8 rt2800_init_rx_filter(struct rt2x00_dev *rt2x00dev,
-				bool bw40, u8 rfcsr24, u8 filter_target)
+static u8 rt2800_init_rx_filter(struct rt2x00_dev *rt2x00dev, bool bw40,
+				u8 filter_target)
 {
 	unsigned int i;
 	u8 bbp;
@@ -4341,6 +4341,7 @@ static u8 rt2800_init_rx_filter(struct rt2x00_dev *rt2x00dev,
 	u8 passband;
 	u8 stopband;
 	u8 overtuned = 0;
+	u8 rfcsr24 = (bw40) ? 0x27 : 0x07;
 
 	rt2800_rfcsr_write(rt2x00dev, 24, rfcsr24);
 
@@ -4409,6 +4410,52 @@ static void rt2800_rf_init_calibration(struct rt2x00_dev *rt2x00dev,
 	rt2800_rfcsr_write(rt2x00dev, rf_reg, rfcsr);
 }
 
+static void rt2800_rx_filter_calibration(struct rt2x00_dev *rt2x00dev)
+{
+	struct rt2800_drv_data *drv_data = rt2x00dev->drv_data;
+	u8 filter_tgt_bw20;
+	u8 filter_tgt_bw40;
+	u8 rfcsr, bbp;
+
+	/*
+	 * TODO: sync filter_tgt values with vendor driver
+	 */
+	if (rt2x00_rt(rt2x00dev, RT3070)) {
+		filter_tgt_bw20 = 0x16;
+		filter_tgt_bw40 = 0x19;
+	} else {
+		filter_tgt_bw20 = 0x13;
+		filter_tgt_bw40 = 0x15;
+	}
+
+	drv_data->calibration_bw20 =
+		rt2800_init_rx_filter(rt2x00dev, false, filter_tgt_bw20);
+	drv_data->calibration_bw40 =
+		rt2800_init_rx_filter(rt2x00dev, true, filter_tgt_bw40);
+
+	/*
+	 * Save BBP 25 & 26 values for later use in channel switching (for 3052)
+	 */
+	rt2800_bbp_read(rt2x00dev, 25, &drv_data->bbp25);
+	rt2800_bbp_read(rt2x00dev, 26, &drv_data->bbp26);
+
+	/*
+	 * Set back to initial state
+	 */
+	rt2800_bbp_write(rt2x00dev, 24, 0);
+
+	rt2800_rfcsr_read(rt2x00dev, 22, &rfcsr);
+	rt2x00_set_field8(&rfcsr, RFCSR22_BASEBAND_LOOPBACK, 0);
+	rt2800_rfcsr_write(rt2x00dev, 22, rfcsr);
+
+	/*
+	 * Set BBP back to BW20
+	 */
+	rt2800_bbp_read(rt2x00dev, 4, &bbp);
+	rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 0);
+	rt2800_bbp_write(rt2x00dev, 4, bbp);
+}
+
 static void rt2800_normal_mode_setup_5xxx(struct rt2x00_dev *rt2x00dev)
 {
 	u8 reg;
@@ -4534,6 +4581,8 @@ static void rt2800_init_rfcsr_30xx(struct rt2x00_dev *rt2x00dev)
 		rt2x00_set_field32(&reg, GPIO_SWITCH_5, 0);
 		rt2800_register_write(rt2x00dev, GPIO_SWITCH, reg);
 	}
+
+	rt2800_rx_filter_calibration(rt2x00dev);
 }
 
 static void rt2800_init_rfcsr_3290(struct rt2x00_dev *rt2x00dev)
@@ -4661,6 +4710,8 @@ static void rt2800_init_rfcsr_3352(struct rt2x00_dev *rt2x00dev)
 	rt2800_rfcsr_write(rt2x00dev, 61, 0x00);
 	rt2800_rfcsr_write(rt2x00dev, 62, 0x00);
 	rt2800_rfcsr_write(rt2x00dev, 63, 0x00);
+
+	rt2800_rx_filter_calibration(rt2x00dev);
 }
 
 static void rt2800_init_rfcsr_3390(struct rt2x00_dev *rt2x00dev)
@@ -4705,6 +4756,8 @@ static void rt2800_init_rfcsr_3390(struct rt2x00_dev *rt2x00dev)
 	rt2800_register_read(rt2x00dev, GPIO_SWITCH, &reg);
 	rt2x00_set_field32(&reg, GPIO_SWITCH_5, 0);
 	rt2800_register_write(rt2x00dev, GPIO_SWITCH, reg);
+
+	rt2800_rx_filter_calibration(rt2x00dev);
 }
 
 static void rt2800_init_rfcsr_3572(struct rt2x00_dev *rt2x00dev)
@@ -4759,6 +4812,8 @@ static void rt2800_init_rfcsr_3572(struct rt2x00_dev *rt2x00dev)
 	rt2x00_set_field32(&reg, LDO_CFG0_LDO_CORE_VLEVEL, 0);
 	rt2x00_set_field32(&reg, LDO_CFG0_BGSEL, 1);
 	rt2800_register_write(rt2x00dev, LDO_CFG0, reg);
+
+	rt2800_rx_filter_calibration(rt2x00dev);
 }
 
 static void rt2800_init_rfcsr_5390(struct rt2x00_dev *rt2x00dev)
@@ -5011,50 +5066,6 @@ static int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev)
 		return 0;
 	}
 
-	/*
-	 * Set RX Filter calibration for 20MHz and 40MHz
-	 */
-	if (rt2x00_rt(rt2x00dev, RT3070)) {
-		drv_data->calibration_bw20 =
-			rt2800_init_rx_filter(rt2x00dev, false, 0x07, 0x16);
-		drv_data->calibration_bw40 =
-			rt2800_init_rx_filter(rt2x00dev, true, 0x27, 0x19);
-	} else if (rt2x00_rt(rt2x00dev, RT3071) ||
-		   rt2x00_rt(rt2x00dev, RT3090) ||
-		   rt2x00_rt(rt2x00dev, RT3352) ||
-		   rt2x00_rt(rt2x00dev, RT3390) ||
-		   rt2x00_rt(rt2x00dev, RT3572)) {
-		drv_data->calibration_bw20 =
-			rt2800_init_rx_filter(rt2x00dev, false, 0x07, 0x13);
-		drv_data->calibration_bw40 =
-			rt2800_init_rx_filter(rt2x00dev, true, 0x27, 0x15);
-	}
-
-	/*
-	 * Save BBP 25 & 26 values for later use in channel switching
-	 */
-	rt2800_bbp_read(rt2x00dev, 25, &drv_data->bbp25);
-	rt2800_bbp_read(rt2x00dev, 26, &drv_data->bbp26);
-
-	if (!rt2x00_rt(rt2x00dev, RT5390) &&
-	    !rt2x00_rt(rt2x00dev, RT5392)) {
-		/*
-		 * Set back to initial state
-		 */
-		rt2800_bbp_write(rt2x00dev, 24, 0);
-
-		rt2800_rfcsr_read(rt2x00dev, 22, &rfcsr);
-		rt2x00_set_field8(&rfcsr, RFCSR22_BASEBAND_LOOPBACK, 0);
-		rt2800_rfcsr_write(rt2x00dev, 22, rfcsr);
-
-		/*
-		 * Set BBP back to BW20
-		 */
-		rt2800_bbp_read(rt2x00dev, 4, &bbp);
-		rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 0);
-		rt2800_bbp_write(rt2x00dev, 4, bbp);
-	}
-
 	if (rt2x00_rt_rev_lt(rt2x00dev, RT3070, REV_RT3070F) ||
 	    rt2x00_rt_rev_lt(rt2x00dev, RT3071, REV_RT3071E) ||
 	    rt2x00_rt_rev_lt(rt2x00dev, RT3090, REV_RT3090E) ||