Merge branch 'upstream-linus' of git://github.com/jgarzik/libata-dev

* 'upstream-linus' of git://github.com/jgarzik/libata-dev: (50 commits)
  pata_efar: fix register naming used in efar_set_piomode()
  pata_rdc: add Power Management support
  ata_piix: unify code for programming PIO and MWDMA timings
  ata_piix: SITRE handling fix
  libata: make ata_sff_data_xfer_noirq() work with 32-bit PIO
  pata_artop: add Power Management support
  pata_sl82c105: add Power Management support
  pata_pdc2027x: add Power Management support
  pata_legacy: use PIO mask defines
  pata_legacy: unify QDI ->set_piomode methods
  libata: remove no longer needed pata_qdi driver
  pata_it8213: fix register naming used in it8213_set_piomode()
  pata_it8213: add UDMA100 and UDMA133 support
  pata_rdc: parallel scanning needs an extra locking
  pata_via: add via_fixup()
  libata: ata_timing_compute() fixup
  pata_scc: add proper cable detection method
  pata_arasan_cf: remove bogus to_platform_device() calls
  pata_atiixp: add proper ->prereset method
  pata_serverworks: add serverworks_fixup()
  ...

drivers/ata/Kconfig

@@ -820,7 +820,7 @@ config PATA_PLATFORM
 
 config PATA_OF_PLATFORM
 	tristate "OpenFirmware platform device PATA support"
-	depends on PATA_PLATFORM && PPC_OF
+	depends on PATA_PLATFORM && OF
 	help
 	  This option enables support for generic directly connected ATA
 	  devices commonly found on embedded systems with OpenFirmware
@@ -831,6 +831,7 @@ config PATA_OF_PLATFORM
 config PATA_QDI
 	tristate "QDI VLB PATA support"
 	depends on ISA
+	select PATA_LEGACY
 	help
 	  Support for QDI 6500 and 6580 PATA controllers on VESA local bus.
 

drivers/ata/Makefile

@@ -88,7 +88,6 @@ obj-$(CONFIG_PATA_PCMCIA)	+= pata_pcmcia.o
 obj-$(CONFIG_PATA_PALMLD)	+= pata_palmld.o
 obj-$(CONFIG_PATA_PLATFORM)	+= pata_platform.o
 obj-$(CONFIG_PATA_OF_PLATFORM)	+= pata_of_platform.o
-obj-$(CONFIG_PATA_QDI)		+= pata_qdi.o
 obj-$(CONFIG_PATA_RB532)	+= pata_rb532_cf.o
 obj-$(CONFIG_PATA_RZ1000)	+= pata_rz1000.o
 obj-$(CONFIG_PATA_SAMSUNG_CF)	+= pata_samsung_cf.o

drivers/ata/ahci_platform.c

@@ -23,6 +23,41 @@
 #include <linux/ahci_platform.h>
 #include "ahci.h"
 
+enum ahci_type {
+	AHCI,		/* standard platform ahci */
+	IMX53_AHCI,	/* ahci on i.mx53 */
+};
+
+static struct platform_device_id ahci_devtype[] = {
+	{
+		.name = "ahci",
+		.driver_data = AHCI,
+	}, {
+		.name = "imx53-ahci",
+		.driver_data = IMX53_AHCI,
+	}, {
+		/* sentinel */
+	}
+};
+MODULE_DEVICE_TABLE(platform, ahci_devtype);
+
+
+static const struct ata_port_info ahci_port_info[] = {
+	/* by features */
+	[AHCI] = {
+		.flags		= AHCI_FLAG_COMMON,
+		.pio_mask	= ATA_PIO4,
+		.udma_mask	= ATA_UDMA6,
+		.port_ops	= &ahci_ops,
+	},
+	[IMX53_AHCI] = {
+		.flags		= AHCI_FLAG_COMMON,
+		.pio_mask	= ATA_PIO4,
+		.udma_mask	= ATA_UDMA6,
+		.port_ops	= &ahci_pmp_retry_srst_ops,
+	},
+};
+
 static struct scsi_host_template ahci_platform_sht = {
 	AHCI_SHT("ahci_platform"),
 };
@@ -31,12 +66,8 @@ static int __init ahci_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct ahci_platform_data *pdata = dev->platform_data;
-	struct ata_port_info pi = {
-		.flags		= AHCI_FLAG_COMMON,
-		.pio_mask	= ATA_PIO4,
-		.udma_mask	= ATA_UDMA6,
-		.port_ops	= &ahci_ops,
-	};
+	const struct platform_device_id *id = platform_get_device_id(pdev);
+	struct ata_port_info pi = ahci_port_info[id->driver_data];
 	const struct ata_port_info *ppi[] = { &pi, NULL };
 	struct ahci_host_priv *hpriv;
 	struct ata_host *host;
@@ -177,6 +208,7 @@ static struct platform_driver ahci_driver = {
 		.name = "ahci",
 		.owner = THIS_MODULE,
 	},
+	.id_table	= ahci_devtype,
 };
 
 static int __init ahci_init(void)

drivers/ata/ata_piix.c

@@ -113,6 +113,8 @@ enum {
 	PIIX_PATA_FLAGS		= ATA_FLAG_SLAVE_POSS,
 	PIIX_SATA_FLAGS		= ATA_FLAG_SATA | PIIX_FLAG_CHECKINTR,
 
+	PIIX_FLAG_PIO16		= (1 << 30), /*support 16bit PIO only*/
+
 	PIIX_80C_PRI		= (1 << 5) | (1 << 4),
 	PIIX_80C_SEC		= (1 << 7) | (1 << 6),
 
@@ -147,6 +149,7 @@ enum piix_controller_ids {
 	ich8m_apple_sata,	/* locks up on second port enable */
 	tolapai_sata,
 	piix_pata_vmw,			/* PIIX4 for VMware, spurious DMA_ERR */
+	ich8_sata_snb,
 };
 
 struct piix_map_db {
@@ -177,6 +180,7 @@ static int piix_sidpr_scr_write(struct ata_link *link,
 static int piix_sidpr_set_lpm(struct ata_link *link, enum ata_lpm_policy policy,
 			      unsigned hints);
 static bool piix_irq_check(struct ata_port *ap);
+static int piix_port_start(struct ata_port *ap);
 #ifdef CONFIG_PM
 static int piix_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg);
 static int piix_pci_device_resume(struct pci_dev *pdev);
@@ -298,21 +302,21 @@ static const struct pci_device_id piix_pci_tbl[] = {
 	/* SATA Controller IDE (PCH) */
 	{ 0x8086, 0x3b2e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
 	/* SATA Controller IDE (CPT) */
-	{ 0x8086, 0x1c00, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
+	{ 0x8086, 0x1c00, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_snb },
 	/* SATA Controller IDE (CPT) */
-	{ 0x8086, 0x1c01, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
+	{ 0x8086, 0x1c01, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_snb },
 	/* SATA Controller IDE (CPT) */
 	{ 0x8086, 0x1c08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
 	/* SATA Controller IDE (CPT) */
 	{ 0x8086, 0x1c09, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
 	/* SATA Controller IDE (PBG) */
-	{ 0x8086, 0x1d00, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
+	{ 0x8086, 0x1d00, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_snb },
 	/* SATA Controller IDE (PBG) */
 	{ 0x8086, 0x1d08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
 	/* SATA Controller IDE (Panther Point) */
-	{ 0x8086, 0x1e00, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
+	{ 0x8086, 0x1e00, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_snb },
 	/* SATA Controller IDE (Panther Point) */
-	{ 0x8086, 0x1e01, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
+	{ 0x8086, 0x1e01, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_snb },
 	/* SATA Controller IDE (Panther Point) */
 	{ 0x8086, 0x1e08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
 	/* SATA Controller IDE (Panther Point) */
@@ -338,6 +342,7 @@ static struct scsi_host_template piix_sht = {
 static struct ata_port_operations piix_sata_ops = {
 	.inherits		= &ata_bmdma32_port_ops,
 	.sff_irq_check		= piix_irq_check,
+	.port_start		= piix_port_start,
 };
 
 static struct ata_port_operations piix_pata_ops = {
@@ -478,6 +483,7 @@ static const struct piix_map_db *piix_map_db_table[] = {
 	[ich8_2port_sata]	= &ich8_2port_map_db,
 	[ich8m_apple_sata]	= &ich8m_apple_map_db,
 	[tolapai_sata]		= &tolapai_map_db,
+	[ich8_sata_snb]		= &ich8_map_db,
 };
 
 static struct ata_port_info piix_port_info[] = {
@@ -606,6 +612,19 @@ static struct ata_port_info piix_port_info[] = {
 		.port_ops	= &piix_vmw_ops,
 	},
 
+	/*
+	 * some Sandybridge chipsets have broken 32 mode up to now,
+	 * see https://bugzilla.kernel.org/show_bug.cgi?id=40592
+	 */
+	[ich8_sata_snb] =
+	{
+		.flags		= PIIX_SATA_FLAGS | PIIX_FLAG_SIDPR | PIIX_FLAG_PIO16,
+		.pio_mask	= ATA_PIO4,
+		.mwdma_mask	= ATA_MWDMA2,
+		.udma_mask	= ATA_UDMA6,
+		.port_ops	= &piix_sata_ops,
+	},
+
 };
 
 static struct pci_bits piix_enable_bits[] = {
@@ -649,6 +668,14 @@ static const struct ich_laptop ich_laptop[] = {
 	{ 0, }
 };
 
+static int piix_port_start(struct ata_port *ap)
+{
+	if (!(ap->flags & PIIX_FLAG_PIO16))
+		ap->pflags |= ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE;
+
+	return ata_bmdma_port_start(ap);
+}
+
 /**
  *	ich_pata_cable_detect - Probe host controller cable detect info
  *	@ap: Port for which cable detect info is desired
@@ -704,22 +731,11 @@ static int piix_pata_prereset(struct ata_link *link, unsigned long deadline)
 
 static DEFINE_SPINLOCK(piix_lock);
 
-/**
- *	piix_set_piomode - Initialize host controller PATA PIO timings
- *	@ap: Port whose timings we are configuring
- *	@adev: um
- *
- *	Set PIO mode for device, in host controller PCI config space.
- *
- *	LOCKING:
- *	None (inherited from caller).
- */
-
-static void piix_set_piomode(struct ata_port *ap, struct ata_device *adev)
+static void piix_set_timings(struct ata_port *ap, struct ata_device *adev,
+			     u8 pio)
 {
 	struct pci_dev *dev	= to_pci_dev(ap->host->dev);
 	unsigned long flags;
-	unsigned int pio	= adev->pio_mode - XFER_PIO_0;
 	unsigned int is_slave	= (adev->devno != 0);
 	unsigned int master_port= ap->port_no ? 0x42 : 0x40;
 	unsigned int slave_port	= 0x44;
@@ -744,10 +760,16 @@ static void piix_set_piomode(struct ata_port *ap, struct ata_device *adev)
 		control |= 1;	/* TIME1 enable */
 	if (ata_pio_need_iordy(adev))
 		control |= 2;	/* IE enable */
-
 	/* Intel specifies that the PPE functionality is for disk only */
 	if (adev->class == ATA_DEV_ATA)
 		control |= 4;	/* PPE enable */
+	/*
+	 * If the drive MWDMA is faster than it can do PIO then
+	 * we must force PIO into PIO0
+	 */
+	if (adev->pio_mode < XFER_PIO_0 + pio)
+		/* Enable DMA timing only */
+		control |= 8;	/* PIO cycles in PIO0 */
 
 	spin_lock_irqsave(&piix_lock, flags);
 
@@ -759,8 +781,6 @@ static void piix_set_piomode(struct ata_port *ap, struct ata_device *adev)
 	if (is_slave) {
 		/* clear TIME1|IE1|PPE1|DTE1 */
 		master_data &= 0xff0f;
-		/* Enable SITRE (separate slave timing register) */
-		master_data |= 0x4000;
 		/* enable PPE1, IE1 and TIME1 as needed */
 		master_data |= (control << 4);
 		pci_read_config_byte(dev, slave_port, &slave_data);
@@ -778,6 +798,9 @@ static void piix_set_piomode(struct ata_port *ap, struct ata_device *adev)
 			(timings[pio][0] << 12) |
 			(timings[pio][1] << 8);
 	}
+
+	/* Enable SITRE (separate slave timing register) */
+	master_data |= 0x4000;
 	pci_write_config_word(dev, master_port, master_data);
 	if (is_slave)
 		pci_write_config_byte(dev, slave_port, slave_data);
@@ -794,6 +817,22 @@ static void piix_set_piomode(struct ata_port *ap, struct ata_device *adev)
 	spin_unlock_irqrestore(&piix_lock, flags);
 }
 
+/**
+ *	piix_set_piomode - Initialize host controller PATA PIO timings
+ *	@ap: Port whose timings we are configuring
+ *	@adev: Drive in question
+ *
+ *	Set PIO mode for device, in host controller PCI config space.
+ *
+ *	LOCKING:
+ *	None (inherited from caller).
+ */
+
+static void piix_set_piomode(struct ata_port *ap, struct ata_device *adev)
+{
+	piix_set_timings(ap, adev, adev->pio_mode - XFER_PIO_0);
+}
+
 /**
  *	do_pata_set_dmamode - Initialize host controller PATA PIO timings
  *	@ap: Port whose timings we are configuring
@@ -810,31 +849,20 @@ static void do_pata_set_dmamode(struct ata_port *ap, struct ata_device *adev, in
 {
 	struct pci_dev *dev	= to_pci_dev(ap->host->dev);
 	unsigned long flags;
-	u8 master_port		= ap->port_no ? 0x42 : 0x40;
-	u16 master_data;
 	u8 speed		= adev->dma_mode;
 	int devid		= adev->devno + 2 * ap->port_no;
 	u8 udma_enable		= 0;
 
-	static const	 /* ISP  RTC */
-	u8 timings[][2]	= { { 0, 0 },
-			    { 0, 0 },
-			    { 1, 0 },
-			    { 2, 1 },
-			    { 2, 3 }, };
-
-	spin_lock_irqsave(&piix_lock, flags);
-
-	pci_read_config_word(dev, master_port, &master_data);
-	if (ap->udma_mask)
-		pci_read_config_byte(dev, 0x48, &udma_enable);
-
 	if (speed >= XFER_UDMA_0) {
-		unsigned int udma = adev->dma_mode - XFER_UDMA_0;
+		unsigned int udma = speed - XFER_UDMA_0;
 		u16 udma_timing;
 		u16 ideconf;
 		int u_clock, u_speed;
 
+		spin_lock_irqsave(&piix_lock, flags);
+
+		pci_read_config_byte(dev, 0x48, &udma_enable);
+
 		/*
 		 * UDMA is handled by a combination of clock switching and
 		 * selection of dividers
@@ -867,56 +895,21 @@ static void do_pata_set_dmamode(struct ata_port *ap, struct ata_device *adev, in
 			   performance (WR_PingPong_En) */
 			pci_write_config_word(dev, 0x54, ideconf);
 		}
+
+		pci_write_config_byte(dev, 0x48, udma_enable);
+
+		spin_unlock_irqrestore(&piix_lock, flags);
 	} else {
-		/*
-		 * MWDMA is driven by the PIO timings. We must also enable
-		 * IORDY unconditionally along with TIME1. PPE has already
-		 * been set when the PIO timing was set.
-		 */
-		unsigned int mwdma	= adev->dma_mode - XFER_MW_DMA_0;
-		unsigned int control;
-		u8 slave_data;
+		/* MWDMA is driven by the PIO timings. */
+		unsigned int mwdma = speed - XFER_MW_DMA_0;
 		const unsigned int needed_pio[3] = {
 			XFER_PIO_0, XFER_PIO_3, XFER_PIO_4
 		};
 		int pio = needed_pio[mwdma] - XFER_PIO_0;
 
-		control = 3;	/* IORDY|TIME1 */
-
-		/* If the drive MWDMA is faster than it can do PIO then
-		   we must force PIO into PIO0 */
-
-		if (adev->pio_mode < needed_pio[mwdma])
-			/* Enable DMA timing only */
-			control |= 8;	/* PIO cycles in PIO0 */
-
-		if (adev->devno) {	/* Slave */
-			master_data &= 0xFF4F;  /* Mask out IORDY|TIME1|DMAONLY */
-			master_data |= control << 4;
-			pci_read_config_byte(dev, 0x44, &slave_data);
-			slave_data &= (ap->port_no ? 0x0f : 0xf0);
-			/* Load the matching timing */
-			slave_data |= ((timings[pio][0] << 2) | timings[pio][1]) << (ap->port_no ? 4 : 0);
-			pci_write_config_byte(dev, 0x44, slave_data);
-		} else { 	/* Master */
-			master_data &= 0xCCF4;	/* Mask out IORDY|TIME1|DMAONLY
-						   and master timing bits */
-			master_data |= control;
-			master_data |=
-				(timings[pio][0] << 12) |
-				(timings[pio][1] << 8);
-		}
-
-		if (ap->udma_mask)
-			udma_enable &= ~(1 << devid);
-
-		pci_write_config_word(dev, master_port, master_data);
+		/* XFER_PIO_0 is never used currently */
+		piix_set_timings(ap, adev, pio);
 	}
-	/* Don't scribble on 0x48 if the controller does not support UDMA */
-	if (ap->udma_mask)
-		pci_write_config_byte(dev, 0x48, udma_enable);
-
-	spin_unlock_irqrestore(&piix_lock, flags);
 }
 
 /**

drivers/ata/libata-core.c

@@ -2938,7 +2938,7 @@ int ata_timing_compute(struct ata_device *adev, unsigned short speed,
 	if (id[ATA_ID_FIELD_VALID] & 2) {	/* EIDE drive */
 		memset(&p, 0, sizeof(p));
 
-		if (speed >= XFER_PIO_0 && speed <= XFER_SW_DMA_0) {
+		if (speed >= XFER_PIO_0 && speed < XFER_SW_DMA_0) {
 			if (speed <= XFER_PIO_2)
 				p.cycle = p.cyc8b = id[ATA_ID_EIDE_PIO];
 			else if ((speed <= XFER_PIO_4) ||

drivers/ata/libata-eh.c

@@ -2532,8 +2532,7 @@ static int ata_do_reset(struct ata_link *link, ata_reset_fn_t reset,
 	return reset(link, classes, deadline);
 }
 
-static int ata_eh_followup_srst_needed(struct ata_link *link,
-				       int rc, const unsigned int *classes)
+static int ata_eh_followup_srst_needed(struct ata_link *link, int rc)
 {
 	if ((link->flags & ATA_LFLAG_NO_SRST) || ata_link_offline(link))
 		return 0;
@@ -2726,7 +2725,7 @@ int ata_eh_reset(struct ata_link *link, int classify,
 
 		/* perform follow-up SRST if necessary */
 		if (reset == hardreset &&
-		    ata_eh_followup_srst_needed(link, rc, classes)) {
+		    ata_eh_followup_srst_needed(link, rc)) {
 			reset = softreset;
 
 			if (!reset) {

drivers/ata/libata-sff.c

@@ -569,7 +569,7 @@ unsigned int ata_sff_data_xfer(struct ata_device *dev, unsigned char *buf,
 
 	/* Transfer trailing byte, if any. */
 	if (unlikely(buflen & 0x01)) {
-		unsigned char pad[2];
+		unsigned char pad[2] = { };
 
 		/* Point buf to the tail of buffer */
 		buf += buflen - 1;
@@ -628,7 +628,7 @@ unsigned int ata_sff_data_xfer32(struct ata_device *dev, unsigned char *buf,
 
 	/* Transfer trailing bytes, if any */
 	if (unlikely(slop)) {
-		unsigned char pad[4];
+		unsigned char pad[4] = { };
 
 		/* Point buf to the tail of buffer */
 		buf += buflen - slop;
@@ -678,7 +678,7 @@ unsigned int ata_sff_data_xfer_noirq(struct ata_device *dev, unsigned char *buf,
 	unsigned int consumed;
 
 	local_irq_save(flags);
-	consumed = ata_sff_data_xfer(dev, buf, buflen, rw);
+	consumed = ata_sff_data_xfer32(dev, buf, buflen, rw);
 	local_irq_restore(flags);
 
 	return consumed;
@@ -2507,31 +2507,10 @@ static const struct ata_port_info *ata_sff_find_valid_pi(
 	return NULL;
 }
 
-/**
- *	ata_pci_sff_init_one - Initialize/register PIO-only PCI IDE controller
- *	@pdev: Controller to be initialized
- *	@ppi: array of port_info, must be enough for two ports
- *	@sht: scsi_host_template to use when registering the host
- *	@host_priv: host private_data
- *	@hflag: host flags
- *
- *	This is a helper function which can be called from a driver's
- *	xxx_init_one() probe function if the hardware uses traditional
- *	IDE taskfile registers and is PIO only.
- *
- *	ASSUMPTION:
- *	Nobody makes a single channel controller that appears solely as
- *	the secondary legacy port on PCI.
- *
- *	LOCKING:
- *	Inherited from PCI layer (may sleep).
- *
- *	RETURNS:
- *	Zero on success, negative on errno-based value on error.
- */
-int ata_pci_sff_init_one(struct pci_dev *pdev,
-		 const struct ata_port_info * const *ppi,
-		 struct scsi_host_template *sht, void *host_priv, int hflag)
+static int ata_pci_init_one(struct pci_dev *pdev,
+		const struct ata_port_info * const *ppi,
+		struct scsi_host_template *sht, void *host_priv,
+		int hflags, bool bmdma)
 {
 	struct device *dev = &pdev->dev;
 	const struct ata_port_info *pi;
@@ -2553,14 +2532,22 @@ int ata_pci_sff_init_one(struct pci_dev *pdev,
 	if (rc)
 		goto out;
 
-	/* prepare and activate SFF host */
-	rc = ata_pci_sff_prepare_host(pdev, ppi, &host);
+	if (bmdma)
+		/* prepare and activate BMDMA host */
+		rc = ata_pci_bmdma_prepare_host(pdev, ppi, &host);
+	else
+		/* prepare and activate SFF host */
+		rc = ata_pci_sff_prepare_host(pdev, ppi, &host);
 	if (rc)
 		goto out;
 	host->private_data = host_priv;
-	host->flags |= hflag;
+	host->flags |= hflags;
 
-	rc = ata_pci_sff_activate_host(host, ata_sff_interrupt, sht);
+	if (bmdma) {
+		pci_set_master(pdev);
+		rc = ata_pci_sff_activate_host(host, ata_bmdma_interrupt, sht);
+	} else
+		rc = ata_pci_sff_activate_host(host, ata_sff_interrupt, sht);
 out:
 	if (rc == 0)
 		devres_remove_group(&pdev->dev, NULL);
@@ -2569,6 +2556,35 @@ out:
 
 	return rc;
 }
+
+/**
+ *	ata_pci_sff_init_one - Initialize/register PIO-only PCI IDE controller
+ *	@pdev: Controller to be initialized
+ *	@ppi: array of port_info, must be enough for two ports
+ *	@sht: scsi_host_template to use when registering the host
+ *	@host_priv: host private_data
+ *	@hflag: host flags
+ *
+ *	This is a helper function which can be called from a driver's
+ *	xxx_init_one() probe function if the hardware uses traditional
+ *	IDE taskfile registers and is PIO only.
+ *
+ *	ASSUMPTION:
+ *	Nobody makes a single channel controller that appears solely as
+ *	the secondary legacy port on PCI.
+ *
+ *	LOCKING:
+ *	Inherited from PCI layer (may sleep).
+ *
+ *	RETURNS:
+ *	Zero on success, negative on errno-based value on error.
+ */
+int ata_pci_sff_init_one(struct pci_dev *pdev,
+		 const struct ata_port_info * const *ppi,
+		 struct scsi_host_template *sht, void *host_priv, int hflag)
+{
+	return ata_pci_init_one(pdev, ppi, sht, host_priv, hflag, 0);
+}
 EXPORT_SYMBOL_GPL(ata_pci_sff_init_one);
 
 #endif /* CONFIG_PCI */
@@ -3286,42 +3302,7 @@ int ata_pci_bmdma_init_one(struct pci_dev *pdev,
 			   struct scsi_host_template *sht, void *host_priv,
 			   int hflags)
 {
-	struct device *dev = &pdev->dev;
-	const struct ata_port_info *pi;
-	struct ata_host *host = NULL;
-	int rc;
-
-	DPRINTK("ENTER\n");
-
-	pi = ata_sff_find_valid_pi(ppi);
-	if (!pi) {
-		dev_err(&pdev->dev, "no valid port_info specified\n");
-		return -EINVAL;
-	}
-
-	if (!devres_open_group(dev, NULL, GFP_KERNEL))
-		return -ENOMEM;
-
-	rc = pcim_enable_device(pdev);
-	if (rc)
-		goto out;
-
-	/* prepare and activate BMDMA host */
-	rc = ata_pci_bmdma_prepare_host(pdev, ppi, &host);
-	if (rc)
-		goto out;
-	host->private_data = host_priv;
-	host->flags |= hflags;
-
-	pci_set_master(pdev);
-	rc = ata_pci_sff_activate_host(host, ata_bmdma_interrupt, sht);
- out:
-	if (rc == 0)
-		devres_remove_group(&pdev->dev, NULL);
-	else
-		devres_release_group(&pdev->dev, NULL);
-
-	return rc;
+	return ata_pci_init_one(pdev, ppi, sht, host_priv, hflags, 1);
 }
 EXPORT_SYMBOL_GPL(ata_pci_bmdma_init_one);
 

drivers/ata/pata_ali.c

@@ -56,7 +56,7 @@ static const struct dmi_system_id cable_dmi_table[] = {
 		},
 	},
 	{
-		.ident = "Toshiba Satelite S1800-814",
+		.ident = "Toshiba Satellite S1800-814",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "S1800-814"),

drivers/ata/pata_arasan_cf.c

@@ -922,8 +922,7 @@ static int __devexit arasan_cf_remove(struct platform_device *pdev)
 #ifdef CONFIG_PM
 static int arasan_cf_suspend(struct device *dev)
 {
-	struct platform_device *pdev = to_platform_device(dev);
-	struct ata_host *host = dev_get_drvdata(&pdev->dev);
+	struct ata_host *host = dev_get_drvdata(dev);
 	struct arasan_cf_dev *acdev = host->ports[0]->private_data;
 
 	if (acdev->dma_chan) {
@@ -937,8 +936,7 @@ static int arasan_cf_suspend(struct device *dev)
 
 static int arasan_cf_resume(struct device *dev)
 {
-	struct platform_device *pdev = to_platform_device(dev);
-	struct ata_host *host = dev_get_drvdata(&pdev->dev);
+	struct ata_host *host = dev_get_drvdata(dev);
 	struct arasan_cf_dev *acdev = host->ports[0]->private_data;
 
 	cf_init(acdev);

drivers/ata/pata_artop.c

@@ -2,7 +2,7 @@
  *    pata_artop.c - ARTOP ATA controller driver
  *
  *	(C) 2006 Red Hat
- *	(C) 2007 Bartlomiej Zolnierkiewicz
+ *	(C) 2007,2011 Bartlomiej Zolnierkiewicz
  *
  *    Based in part on drivers/ide/pci/aec62xx.c
  *	Copyright (C) 1999-2002	Andre Hedrick <andre@linux-ide.org>
@@ -28,7 +28,7 @@
 #include <linux/ata.h>
 
 #define DRV_NAME	"pata_artop"
-#define DRV_VERSION	"0.4.5"
+#define DRV_VERSION	"0.4.6"
 
 /*
  *	The ARTOP has 33 Mhz and "over clocked" timing tables. Until we
@@ -39,31 +39,15 @@
 
 static int clock = 0;
 
-static int artop6210_pre_reset(struct ata_link *link, unsigned long deadline)
-{
-	struct ata_port *ap = link->ap;
-	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
-	const struct pci_bits artop_enable_bits[] = {
-		{ 0x4AU, 1U, 0x02UL, 0x02UL },	/* port 0 */
-		{ 0x4AU, 1U, 0x04UL, 0x04UL },	/* port 1 */
-	};
-
-	if (!pci_test_config_bits(pdev, &artop_enable_bits[ap->port_no]))
-		return -ENOENT;
-
-	return ata_sff_prereset(link, deadline);
-}
-
 /**
- *	artop6260_pre_reset	-	check for 40/80 pin
+ *	artop62x0_pre_reset	-	probe begin
  *	@link: link
  *	@deadline: deadline jiffies for the operation
  *
- *	The ARTOP hardware reports the cable detect bits in register 0x49.
  *	Nothing complicated needed here.
  */
 
-static int artop6260_pre_reset(struct ata_link *link, unsigned long deadline)
+static int artop62x0_pre_reset(struct ata_link *link, unsigned long deadline)
 {
 	static const struct pci_bits artop_enable_bits[] = {
 		{ 0x4AU, 1U, 0x02UL, 0x02UL },	/* port 0 */
@@ -73,7 +57,7 @@ static int artop6260_pre_reset(struct ata_link *link, unsigned long deadline)
 	struct ata_port *ap = link->ap;
 	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
 
-	/* Odd numbered device ids are the units with enable bits (the -R cards) */
+	/* Odd numbered device ids are the units with enable bits. */
 	if ((pdev->device & 1) &&
 	    !pci_test_config_bits(pdev, &artop_enable_bits[ap->port_no]))
 		return -ENOENT;
@@ -317,7 +301,7 @@ static struct ata_port_operations artop6210_ops = {
 	.cable_detect		= ata_cable_40wire,
 	.set_piomode		= artop6210_set_piomode,
 	.set_dmamode		= artop6210_set_dmamode,
-	.prereset		= artop6210_pre_reset,
+	.prereset		= artop62x0_pre_reset,
 	.qc_defer		= artop6210_qc_defer,
 };
 
@@ -326,9 +310,36 @@ static struct ata_port_operations artop6260_ops = {
 	.cable_detect		= artop6260_cable_detect,
 	.set_piomode		= artop6260_set_piomode,
 	.set_dmamode		= artop6260_set_dmamode,
-	.prereset		= artop6260_pre_reset,
+	.prereset		= artop62x0_pre_reset,
 };
 
+static void atp8xx_fixup(struct pci_dev *pdev)
+{
+	if (pdev->device == 0x0005)
+		/* BIOS may have left us in UDMA, clear it before libata probe */
+		pci_write_config_byte(pdev, 0x54, 0);
+	else if (pdev->device == 0x0008 || pdev->device == 0x0009) {
+		u8 reg;
+
+		/* Mac systems come up with some registers not set as we
+		   will need them */
+
+		/* Clear reset & test bits */
+		pci_read_config_byte(pdev, 0x49, &reg);
+		pci_write_config_byte(pdev, 0x49, reg & ~0x30);
+
+		/* PCI latency must be > 0x80 for burst mode, tweak it
+		 * if required.
+		 */
+		pci_read_config_byte(pdev, PCI_LATENCY_TIMER, &reg);
+		if (reg <= 0x80)
+			pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x90);
+
+		/* Enable IRQ output and burst mode */
+		pci_read_config_byte(pdev, 0x4a, &reg);
+		pci_write_config_byte(pdev, 0x4a, (reg & ~0x01) | 0x80);
+	}
+}
 
 /**
  *	artop_init_one - Register ARTOP ATA PCI device with kernel services
@@ -383,42 +394,22 @@ static int artop_init_one (struct pci_dev *pdev, const struct pci_device_id *id)
 	if (rc)
 		return rc;
 
-	if (id->driver_data == 0) {	/* 6210 variant */
+	if (id->driver_data == 0)	/* 6210 variant */
 		ppi[0] = &info_6210;
-		/* BIOS may have left us in UDMA, clear it before libata probe */
-		pci_write_config_byte(pdev, 0x54, 0);
-	}
 	else if (id->driver_data == 1)	/* 6260 */
 		ppi[0] = &info_626x;
 	else if (id->driver_data == 2)	{ /* 6280 or 6280 + fast */
 		unsigned long io = pci_resource_start(pdev, 4);
-		u8 reg;
 
 		ppi[0] = &info_628x;
 		if (inb(io) & 0x10)
 			ppi[0] = &info_628x_fast;
-		/* Mac systems come up with some registers not set as we
-		   will need them */
-
-		/* Clear reset & test bits */
-		pci_read_config_byte(pdev, 0x49, &reg);
-		pci_write_config_byte(pdev, 0x49, reg & ~ 0x30);
-
-		/* PCI latency must be > 0x80 for burst mode, tweak it
-		 * if required.
-		 */
-		pci_read_config_byte(pdev, PCI_LATENCY_TIMER, &reg);
-		if (reg <= 0x80)
-			pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x90);
-
-		/* Enable IRQ output and burst mode */
-		pci_read_config_byte(pdev, 0x4a, &reg);
-		pci_write_config_byte(pdev, 0x4a, (reg & ~0x01) | 0x80);
-
 	}
 
 	BUG_ON(ppi[0] == NULL);
 
+	atp8xx_fixup(pdev);
+
 	return ata_pci_bmdma_init_one(pdev, ppi, &artop_sht, NULL, 0);
 }
 
@@ -432,11 +423,32 @@ static const struct pci_device_id artop_pci_tbl[] = {
 	{ }	/* terminate list */
 };
 
+#ifdef CONFIG_PM
+static int atp8xx_reinit_one(struct pci_dev *pdev)
+{
+	struct ata_host *host = dev_get_drvdata(&pdev->dev);
+	int rc;
+
+	rc = ata_pci_device_do_resume(pdev);
+	if (rc)
+		return rc;
+
+	atp8xx_fixup(pdev);
+
+	ata_host_resume(host);
+	return 0;
+}
+#endif
+
 static struct pci_driver artop_pci_driver = {
 	.name			= DRV_NAME,
 	.id_table		= artop_pci_tbl,
 	.probe			= artop_init_one,
 	.remove			= ata_pci_remove_one,
+#ifdef CONFIG_PM
+	.suspend		= ata_pci_device_suspend,
+	.resume			= atp8xx_reinit_one,
+#endif
 };
 
 static int __init artop_init(void)
@@ -452,9 +464,8 @@ static void __exit artop_exit(void)
 module_init(artop_init);
 module_exit(artop_exit);
 
-MODULE_AUTHOR("Alan Cox");
+MODULE_AUTHOR("Alan Cox, Bartlomiej Zolnierkiewicz");
 MODULE_DESCRIPTION("SCSI low-level driver for ARTOP PATA");
 MODULE_LICENSE("GPL");
 MODULE_DEVICE_TABLE(pci, artop_pci_tbl);
 MODULE_VERSION(DRV_VERSION);
-

drivers/ata/pata_at91.c

@@ -414,10 +414,13 @@ static int __devinit pata_at91_probe(struct platform_device *pdev)
 
 	host->private_data = info;
 
-	return ata_host_activate(host, irq ? gpio_to_irq(irq) : 0,
+	ret = ata_host_activate(host, irq ? gpio_to_irq(irq) : 0,
 			irq ? ata_sff_interrupt : NULL,
 			irq_flags, &pata_at91_sht);
 
+	if (!ret)
+		return 0;
+
 err_put:
 	clk_put(info->mck);
 	return ret;

drivers/ata/pata_atiixp.c

@@ -48,6 +48,31 @@ static int atiixp_cable_detect(struct ata_port *ap)
 
 static DEFINE_SPINLOCK(atiixp_lock);
 
+/**
+ *	atiixp_prereset	-	perform reset handling
+ *	@link: ATA link
+ *	@deadline: deadline jiffies for the operation
+ *
+ *	Reset sequence checking enable bits to see which ports are
+ *	active.
+ */
+
+static int atiixp_prereset(struct ata_link *link, unsigned long deadline)
+{
+	static const struct pci_bits atiixp_enable_bits[] = {
+		{ 0x48, 1, 0x01, 0x00 },
+		{ 0x48, 1, 0x08, 0x00 }
+	};
+
+	struct ata_port *ap = link->ap;
+	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+
+	if (!pci_test_config_bits(pdev, &atiixp_enable_bits[ap->port_no]))
+		return -ENOENT;
+
+	return ata_sff_prereset(link, deadline);
+}
+
 /**
  *	atiixp_set_pio_timing	-	set initial PIO mode data
  *	@ap: ATA interface
@@ -221,6 +246,7 @@ static struct ata_port_operations atiixp_port_ops = {
 	.bmdma_start 	= atiixp_bmdma_start,
 	.bmdma_stop	= atiixp_bmdma_stop,
 
+	.prereset	= atiixp_prereset,
 	.cable_detect	= atiixp_cable_detect,
 	.set_piomode	= atiixp_set_piomode,
 	.set_dmamode	= atiixp_set_dmamode,
@@ -235,16 +261,7 @@ static int atiixp_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 		.udma_mask = ATA_UDMA5,
 		.port_ops = &atiixp_port_ops
 	};
-	static const struct pci_bits atiixp_enable_bits[] = {
-		{ 0x48, 1, 0x01, 0x00 },
-		{ 0x48, 1, 0x08, 0x00 }
-	};
 	const struct ata_port_info *ppi[] = { &info, &info };
-	int i;
-
-	for (i = 0; i < 2; i++)
-		if (!pci_test_config_bits(pdev, &atiixp_enable_bits[i]))
-			ppi[i] = &ata_dummy_port_info;
 
 	return ata_pci_bmdma_init_one(pdev, ppi, &atiixp_sht, NULL,
 				      ATA_HOST_PARALLEL_SCAN);

drivers/ata/pata_cmd64x.c

@@ -82,7 +82,7 @@ static int cmd648_cable_detect(struct ata_port *ap)
 }
 
 /**
- *	cmd64x_set_piomode	-	set PIO and MWDMA timing
+ *	cmd64x_set_timing	-	set PIO and MWDMA timing
  *	@ap: ATA interface
  *	@adev: ATA device
  *	@mode: mode
@@ -288,6 +288,22 @@ static struct ata_port_operations cmd648_port_ops = {
 	.cable_detect	= cmd648_cable_detect,
 };
 
+static void cmd64x_fixup(struct pci_dev *pdev)
+{
+	u8 mrdmode;
+
+	pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 64);
+	pci_read_config_byte(pdev, MRDMODE, &mrdmode);
+	mrdmode &= ~0x30;	/* IRQ set up */
+	mrdmode |= 0x02;	/* Memory read line enable */
+	pci_write_config_byte(pdev, MRDMODE, mrdmode);
+
+	/* PPC specific fixup copied from old driver */
+#ifdef CONFIG_PPC
+	pci_write_config_byte(pdev, UDIDETCR0, 0xF0);
+#endif
+}
+
 static int cmd64x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 {
 	static const struct ata_port_info cmd_info[6] = {
@@ -336,7 +352,7 @@ static int cmd64x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 		&cmd_info[id->driver_data],
 		NULL
 	};
-	u8 mrdmode, reg;
+	u8 reg;
 	int rc;
 	struct pci_dev *bridge = pdev->bus->self;
 	/* mobility split bridges don't report enabled ports correctly */
@@ -368,11 +384,7 @@ static int cmd64x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 			cntrl_ch0_ok = 0;
 	}
 
-	pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 64);
-	pci_read_config_byte(pdev, MRDMODE, &mrdmode);
-	mrdmode &= ~ 0x30;	/* IRQ set up */
-	mrdmode |= 0x02;	/* Memory read line enable */
-	pci_write_config_byte(pdev, MRDMODE, mrdmode);
+	cmd64x_fixup(pdev);
 
 	/* check for enabled ports */
 	pci_read_config_byte(pdev, CNTRL, &reg);
@@ -388,13 +400,6 @@ static int cmd64x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 		ppi[1] = &ata_dummy_port_info;
 	}
 
-	/* Force PIO 0 here.. */
-
-	/* PPC specific fixup copied from old driver */
-#ifdef CONFIG_PPC
-	pci_write_config_byte(pdev, UDIDETCR0, 0xF0);
-#endif
-
 	return ata_pci_bmdma_init_one(pdev, ppi, &cmd64x_sht, NULL, 0);
 }
 
@@ -402,21 +407,14 @@ static int cmd64x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 static int cmd64x_reinit_one(struct pci_dev *pdev)
 {
 	struct ata_host *host = dev_get_drvdata(&pdev->dev);
-	u8 mrdmode;
 	int rc;
 
 	rc = ata_pci_device_do_resume(pdev);
 	if (rc)
 		return rc;
 
-	pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 64);
-	pci_read_config_byte(pdev, MRDMODE, &mrdmode);
-	mrdmode &= ~ 0x30;	/* IRQ set up */
-	mrdmode |= 0x02;	/* Memory read line enable */
-	pci_write_config_byte(pdev, MRDMODE, mrdmode);
-#ifdef CONFIG_PPC
-	pci_write_config_byte(pdev, UDIDETCR0, 0xF0);
-#endif
+	cmd64x_fixup(pdev);
+
 	ata_host_resume(host);
 	return 0;
 }

drivers/ata/pata_cs5535.c

@@ -38,7 +38,7 @@
 #include <linux/libata.h>
 #include <asm/msr.h>
 
-#define DRV_NAME	"cs5535"
+#define DRV_NAME	"pata_cs5535"
 #define DRV_VERSION	"0.2.12"
 
 /*
@@ -67,8 +67,6 @@
 
 #define CS5535_CABLE_DETECT    0x48
 
-#define CS5535_BAD_PIO(timings) ( (timings&~0x80000000UL)==0x00009172 )
-
 /**
  *	cs5535_cable_detect	-	detect cable type
  *	@ap: Port to detect on
@@ -188,16 +186,6 @@ static int cs5535_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 	};
 	const struct ata_port_info *ppi[] = { &info, &ata_dummy_port_info };
 
-	u32 timings, dummy;
-
-	/* Check the BIOS set the initial timing clock. If not set the
-	   timings for PIO0 */
-	rdmsr(ATAC_CH0D0_PIO, timings, dummy);
-	if (CS5535_BAD_PIO(timings))
-		wrmsr(ATAC_CH0D0_PIO, 0xF7F4F7F4UL, 0);
-	rdmsr(ATAC_CH0D1_PIO, timings, dummy);
-	if (CS5535_BAD_PIO(timings))
-		wrmsr(ATAC_CH0D1_PIO, 0xF7F4F7F4UL, 0);
 	return ata_pci_bmdma_init_one(dev, ppi, &cs5535_sht, NULL, 0);
 }
 
@@ -230,7 +218,7 @@ static void __exit cs5535_exit(void)
 }
 
 MODULE_AUTHOR("Alan Cox, Jens Altmann, Wolfgan Zuleger, Alexander Kiausch");
-MODULE_DESCRIPTION("low-level driver for the NS/AMD 5530");
+MODULE_DESCRIPTION("low-level driver for the NS/AMD 5535");
 MODULE_LICENSE("GPL");
 MODULE_DEVICE_TABLE(pci, cs5535);
 MODULE_VERSION(DRV_VERSION);

drivers/ata/pata_efar.c

@@ -73,7 +73,7 @@ static DEFINE_SPINLOCK(efar_lock);
 /**
  *	efar_set_piomode - Initialize host controller PATA PIO timings
  *	@ap: Port whose timings we are configuring
- *	@adev: um
+ *	@adev: Device to program
  *
  *	Set PIO mode for device, in host controller PCI config space.
  *
@@ -85,9 +85,9 @@ static void efar_set_piomode (struct ata_port *ap, struct ata_device *adev)
 {
 	unsigned int pio	= adev->pio_mode - XFER_PIO_0;
 	struct pci_dev *dev	= to_pci_dev(ap->host->dev);
-	unsigned int idetm_port= ap->port_no ? 0x42 : 0x40;
+	unsigned int master_port = ap->port_no ? 0x42 : 0x40;
 	unsigned long flags;
-	u16 idetm_data;
+	u16 master_data;
 	u8 udma_enable;
 	int control = 0;
 
@@ -113,20 +113,20 @@ static void efar_set_piomode (struct ata_port *ap, struct ata_device *adev)
 
 	spin_lock_irqsave(&efar_lock, flags);
 
-	pci_read_config_word(dev, idetm_port, &idetm_data);
+	pci_read_config_word(dev, master_port, &master_data);
 
 	/* Set PPE, IE, and TIME as appropriate */
 	if (adev->devno == 0) {
-		idetm_data &= 0xCCF0;
-		idetm_data |= control;
-		idetm_data |= (timings[pio][0] << 12) |
+		master_data &= 0xCCF0;
+		master_data |= control;
+		master_data |= (timings[pio][0] << 12) |
 			(timings[pio][1] << 8);
 	} else {
 		int shift = 4 * ap->port_no;
 		u8 slave_data;
 
-		idetm_data &= 0xFF0F;
-		idetm_data |= (control << 4);
+		master_data &= 0xFF0F;
+		master_data |= (control << 4);
 
 		/* Slave timing in separate register */
 		pci_read_config_byte(dev, 0x44, &slave_data);
@@ -135,8 +135,8 @@ static void efar_set_piomode (struct ata_port *ap, struct ata_device *adev)
 		pci_write_config_byte(dev, 0x44, slave_data);
 	}
 
-	idetm_data |= 0x4000;	/* Ensure SITRE is set */
-	pci_write_config_word(dev, idetm_port, idetm_data);
+	master_data |= 0x4000;	/* Ensure SITRE is set */
+	pci_write_config_word(dev, master_port, master_data);
 
 	pci_read_config_byte(dev, 0x48, &udma_enable);
 	udma_enable &= ~(1 << (2 * ap->port_no + adev->devno));

drivers/ata/pata_hpt366.c

@@ -111,6 +111,28 @@ static const struct hpt_clock hpt366_25[] = {
 	{	0,		0x01208585	}
 };
 
+/**
+ *	hpt36x_find_mode	-	find the hpt36x timing
+ *	@ap: ATA port
+ *	@speed: transfer mode
+ *
+ *	Return the 32bit register programming information for this channel
+ *	that matches the speed provided.
+ */
+
+static u32 hpt36x_find_mode(struct ata_port *ap, int speed)
+{
+	struct hpt_clock *clocks = ap->host->private_data;
+
+	while (clocks->xfer_mode) {
+		if (clocks->xfer_mode == speed)
+			return clocks->timing;
+		clocks++;
+	}
+	BUG();
+	return 0xffffffffU;	/* silence compiler warning */
+}
+
 static const char * const bad_ata33[] = {
 	"Maxtor 92720U8", "Maxtor 92040U6", "Maxtor 91360U4", "Maxtor 91020U3",
 	"Maxtor 90845U3", "Maxtor 90650U2",
@@ -210,10 +232,9 @@ static int hpt36x_cable_detect(struct ata_port *ap)
 static void hpt366_set_mode(struct ata_port *ap, struct ata_device *adev,
 			    u8 mode)
 {
-	struct hpt_clock *clocks = ap->host->private_data;
 	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
 	u32 addr = 0x40 + 4 * adev->devno;
-	u32 mask, reg;
+	u32 mask, reg, t;
 
 	/* determine timing mask and find matching clock entry */
 	if (mode < XFER_MW_DMA_0)
@@ -223,13 +244,7 @@ static void hpt366_set_mode(struct ata_port *ap, struct ata_device *adev,
 	else
 		mask = 0x30070000;
 
-	while (clocks->xfer_mode) {
-		if (clocks->xfer_mode == mode)
-			break;
-		clocks++;
-	}
-	if (!clocks->xfer_mode)
-		BUG();
+	t = hpt36x_find_mode(ap, mode);
 
 	/*
 	 * Combine new mode bits with old config bits and disable
@@ -237,7 +252,7 @@ static void hpt366_set_mode(struct ata_port *ap, struct ata_device *adev,
 	 * problems handling I/O errors later.
 	 */
 	pci_read_config_dword(pdev, addr, &reg);
-	reg = ((reg & ~mask) | (clocks->timing & mask)) & ~0xc0000000;
+	reg = ((reg & ~mask) | (t & mask)) & ~0xc0000000;
 	pci_write_config_dword(pdev, addr, reg);
 }
 

drivers/ata/pata_it8213.c

@@ -76,8 +76,8 @@ static void it8213_set_piomode (struct ata_port *ap, struct ata_device *adev)
 {
 	unsigned int pio	= adev->pio_mode - XFER_PIO_0;
 	struct pci_dev *dev	= to_pci_dev(ap->host->dev);
-	unsigned int idetm_port= ap->port_no ? 0x42 : 0x40;
-	u16 idetm_data;
+	unsigned int master_port = ap->port_no ? 0x42 : 0x40;
+	u16 master_data;
 	int control = 0;
 
 	/*
@@ -100,19 +100,19 @@ static void it8213_set_piomode (struct ata_port *ap, struct ata_device *adev)
 	if (adev->class != ATA_DEV_ATA)
 		control |= 4;	/* PPE */
 
-	pci_read_config_word(dev, idetm_port, &idetm_data);
+	pci_read_config_word(dev, master_port, &master_data);
 
 	/* Set PPE, IE, and TIME as appropriate */
 	if (adev->devno == 0) {
-		idetm_data &= 0xCCF0;
-		idetm_data |= control;
-		idetm_data |= (timings[pio][0] << 12) |
+		master_data &= 0xCCF0;
+		master_data |= control;
+		master_data |= (timings[pio][0] << 12) |
 			(timings[pio][1] << 8);
 	} else {
 		u8 slave_data;
 
-		idetm_data &= 0xFF0F;
-		idetm_data |= (control << 4);
+		master_data &= 0xFF0F;
+		master_data |= (control << 4);
 
 		/* Slave timing in separate register */
 		pci_read_config_byte(dev, 0x44, &slave_data);
@@ -121,8 +121,8 @@ static void it8213_set_piomode (struct ata_port *ap, struct ata_device *adev)
 		pci_write_config_byte(dev, 0x44, slave_data);
 	}
 
-	idetm_data |= 0x4000;	/* Ensure SITRE is set */
-	pci_write_config_word(dev, idetm_port, idetm_data);
+	master_data |= 0x4000;	/* Ensure SITRE is set */
+	pci_write_config_word(dev, master_port, master_data);
 }
 
 /**
@@ -163,7 +163,7 @@ static void it8213_set_dmamode (struct ata_port *ap, struct ata_device *adev)
 
 		/* Clocks follow the PIIX style */
 		u_speed = min(2 - (udma & 1), udma);
-		if (udma == 5)
+		if (udma > 4)
 			u_clock = 0x1000;	/* 100Mhz */
 		else if (udma > 2)
 			u_clock = 1;		/* 66Mhz */
@@ -262,7 +262,7 @@ static int it8213_init_one (struct pci_dev *pdev, const struct pci_device_id *en
 		.flags		= ATA_FLAG_SLAVE_POSS,
 		.pio_mask	= ATA_PIO4,
 		.mwdma_mask	= ATA_MWDMA12_ONLY,
-		.udma_mask 	= ATA_UDMA4, /* FIXME: want UDMA 100? */
+		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &it8213_ops,
 	};
 	/* Current IT8213 stuff is single port */

drivers/ata/pata_legacy.c

@@ -79,15 +79,6 @@ static int all;
 module_param(all, int, 0444);
 MODULE_PARM_DESC(all, "Grab all legacy port devices, even if PCI(0=off, 1=on)");
 
-struct legacy_data {
-	unsigned long timing;
-	u8 clock[2];
-	u8 last;
-	int fast;
-	struct platform_device *platform_dev;
-
-};
-
 enum controller {
 	BIOS = 0,
 	SNOOP = 1,
@@ -104,6 +95,14 @@ enum controller {
 	UNKNOWN = -1
 };
 
+struct legacy_data {
+	unsigned long timing;
+	u8 clock[2];
+	u8 last;
+	int fast;
+	enum controller type;
+	struct platform_device *platform_dev;
+};
 
 struct legacy_probe {
 	unsigned char *name;
@@ -137,11 +136,17 @@ static int ht6560a;		/* HT 6560A on primary 1, second 2, both 3 */
 static int ht6560b;		/* HT 6560A on primary 1, second 2, both 3 */
 static int opti82c611a;		/* Opti82c611A on primary 1, sec 2, both 3 */
 static int opti82c46x;		/* Opti 82c465MV present(pri/sec autodetect) */
-static int qdi;			/* Set to probe QDI controllers */
 static int autospeed;		/* Chip present which snoops speed changes */
 static int pio_mask = ATA_PIO4;	/* PIO range for autospeed devices */
 static int iordy_mask = 0xFFFFFFFF;	/* Use iordy if available */
 
+/* Set to probe QDI controllers */
+#ifdef CONFIG_PATA_QDI_MODULE
+static int qdi = 1;
+#else
+static int qdi;
+#endif
+
 #ifdef CONFIG_PATA_WINBOND_VLB_MODULE
 static int winbond = 1;		/* Set to probe Winbond controllers,
 					give I/O port if non standard */
@@ -631,40 +636,20 @@ static struct ata_port_operations opti82c46x_port_ops = {
 	.qc_issue	= opti82c46x_qc_issue,
 };
 
-static void qdi6500_set_piomode(struct ata_port *ap, struct ata_device *adev)
-{
-	struct ata_timing t;
-	struct legacy_data *ld_qdi = ap->host->private_data;
-	int active, recovery;
-	u8 timing;
-
-	/* Get the timing data in cycles */
-	ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000);
-
-	if (ld_qdi->fast) {
-		active = 8 - clamp_val(t.active, 1, 8);
-		recovery = 18 - clamp_val(t.recover, 3, 18);
-	} else {
-		active = 9 - clamp_val(t.active, 2, 9);
-		recovery = 15 - clamp_val(t.recover, 0, 15);
-	}
-	timing = (recovery << 4) | active | 0x08;
-
-	ld_qdi->clock[adev->devno] = timing;
-
-	outb(timing, ld_qdi->timing);
-}
-
 /**
- *	qdi6580dp_set_piomode		-	PIO setup for dual channel
+ *	qdi65x0_set_piomode		-	PIO setup for QDI65x0
  *	@ap: Port
  *	@adev: Device
  *
+ *	In single channel mode the 6580 has one clock per device and we can
+ *	avoid the requirement to clock switch. We also have to load the timing
+ *	into the right clock according to whether we are master or slave.
+ *
  *	In dual channel mode the 6580 has one clock per channel and we have
  *	to software clockswitch in qc_issue.
  */
 
-static void qdi6580dp_set_piomode(struct ata_port *ap, struct ata_device *adev)
+static void qdi65x0_set_piomode(struct ata_port *ap, struct ata_device *adev)
 {
 	struct ata_timing t;
 	struct legacy_data *ld_qdi = ap->host->private_data;
@@ -682,47 +667,15 @@ static void qdi6580dp_set_piomode(struct ata_port *ap, struct ata_device *adev)
 		recovery = 15 - clamp_val(t.recover, 0, 15);
 	}
 	timing = (recovery << 4) | active | 0x08;
-
 	ld_qdi->clock[adev->devno] = timing;
 
-	outb(timing, ld_qdi->timing + 2 * ap->port_no);
-	/* Clear the FIFO */
-	if (adev->class != ATA_DEV_ATA)
-		outb(0x5F, (ld_qdi->timing & 0xFFF0) + 3);
-}
-
-/**
- *	qdi6580_set_piomode		-	PIO setup for single channel
- *	@ap: Port
- *	@adev: Device
- *
- *	In single channel mode the 6580 has one clock per device and we can
- *	avoid the requirement to clock switch. We also have to load the timing
- *	into the right clock according to whether we are master or slave.
- */
-
-static void qdi6580_set_piomode(struct ata_port *ap, struct ata_device *adev)
-{
-	struct ata_timing t;
-	struct legacy_data *ld_qdi = ap->host->private_data;
-	int active, recovery;
-	u8 timing;
-
-	/* Get the timing data in cycles */
-	ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000);
+	if (ld_qdi->type == QDI6580)
+		outb(timing, ld_qdi->timing + 2 * adev->devno);
+	else
+		outb(timing, ld_qdi->timing + 2 * ap->port_no);
 
-	if (ld_qdi->fast) {
-		active = 8 - clamp_val(t.active, 1, 8);
-		recovery = 18 - clamp_val(t.recover, 3, 18);
-	} else {
-		active = 9 - clamp_val(t.active, 2, 9);
-		recovery = 15 - clamp_val(t.recover, 0, 15);
-	}
-	timing = (recovery << 4) | active | 0x08;
-	ld_qdi->clock[adev->devno] = timing;
-	outb(timing, ld_qdi->timing + 2 * adev->devno);
 	/* Clear the FIFO */
-	if (adev->class != ATA_DEV_ATA)
+	if (ld_qdi->type != QDI6500 && adev->class != ATA_DEV_ATA)
 		outb(0x5F, (ld_qdi->timing & 0xFFF0) + 3);
 }
 
@@ -789,20 +742,20 @@ static int qdi_port(struct platform_device *dev,
 
 static struct ata_port_operations qdi6500_port_ops = {
 	.inherits	= &legacy_base_port_ops,
-	.set_piomode	= qdi6500_set_piomode,
+	.set_piomode	= qdi65x0_set_piomode,
 	.qc_issue	= qdi_qc_issue,
 	.sff_data_xfer	= vlb32_data_xfer,
 };
 
 static struct ata_port_operations qdi6580_port_ops = {
 	.inherits	= &legacy_base_port_ops,
-	.set_piomode	= qdi6580_set_piomode,
+	.set_piomode	= qdi65x0_set_piomode,
 	.sff_data_xfer	= vlb32_data_xfer,
 };
 
 static struct ata_port_operations qdi6580dp_port_ops = {
 	.inherits	= &legacy_base_port_ops,
-	.set_piomode	= qdi6580dp_set_piomode,
+	.set_piomode	= qdi65x0_set_piomode,
 	.qc_issue	= qdi_qc_issue,
 	.sff_data_xfer	= vlb32_data_xfer,
 };
@@ -879,29 +832,29 @@ static struct ata_port_operations winbond_port_ops = {
 };
 
 static struct legacy_controller controllers[] = {
-	{"BIOS",	&legacy_port_ops, 	0x1F,
+	{"BIOS",	&legacy_port_ops, 	ATA_PIO4,
 			ATA_FLAG_NO_IORDY,	0,			NULL },
-	{"Snooping", 	&simple_port_ops, 	0x1F,
+	{"Snooping", 	&simple_port_ops, 	ATA_PIO4,
 			0,			0,			NULL },
-	{"PDC20230",	&pdc20230_port_ops,	0x7,
+	{"PDC20230",	&pdc20230_port_ops,	ATA_PIO2,
 			ATA_FLAG_NO_IORDY,
 			ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE,	NULL },
-	{"HT6560A",	&ht6560a_port_ops,	0x07,
+	{"HT6560A",	&ht6560a_port_ops,	ATA_PIO2,
 			ATA_FLAG_NO_IORDY,	0,			NULL },
-	{"HT6560B",	&ht6560b_port_ops,	0x1F,
+	{"HT6560B",	&ht6560b_port_ops,	ATA_PIO4,
 			ATA_FLAG_NO_IORDY,	0,			NULL },
-	{"OPTI82C611A",	&opti82c611a_port_ops,	0x0F,
+	{"OPTI82C611A",	&opti82c611a_port_ops,	ATA_PIO3,
 			0,			0,			NULL },
-	{"OPTI82C46X",	&opti82c46x_port_ops,	0x0F,
+	{"OPTI82C46X",	&opti82c46x_port_ops,	ATA_PIO3,
 			0,			0,			NULL },
-	{"QDI6500",	&qdi6500_port_ops,	0x07,
+	{"QDI6500",	&qdi6500_port_ops,	ATA_PIO2,
 			ATA_FLAG_NO_IORDY,
 			ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE,    qdi_port },
-	{"QDI6580",	&qdi6580_port_ops,	0x1F,
+	{"QDI6580",	&qdi6580_port_ops,	ATA_PIO4,
 			0, ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE, qdi_port },
-	{"QDI6580DP",	&qdi6580dp_port_ops,	0x1F,
+	{"QDI6580DP",	&qdi6580dp_port_ops,	ATA_PIO4,
 			0, ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE, qdi_port },
-	{"W83759A",	&winbond_port_ops,	0x1F,
+	{"W83759A",	&winbond_port_ops,	ATA_PIO4,
 			0, ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE,
 								winbond_port }
 };
@@ -1022,6 +975,7 @@ static __init int legacy_init_one(struct legacy_probe *probe)
 	ctrl_addr = devm_ioport_map(&pdev->dev, io + 0x0206, 1);
 	if (!io_addr || !ctrl_addr)
 		goto fail;
+	ld->type = probe->type;
 	if (controller->setup)
 		if (controller->setup(pdev, probe, ld) < 0)
 			goto fail;
@@ -1306,6 +1260,7 @@ MODULE_AUTHOR("Alan Cox");
 MODULE_DESCRIPTION("low-level driver for legacy ATA");
 MODULE_LICENSE("GPL");
 MODULE_VERSION(DRV_VERSION);
+MODULE_ALIAS("pata_qdi");
 MODULE_ALIAS("pata_winbond");
 
 module_param(probe_all, int, 0);

drivers/ata/pata_mpc52xx.c

@@ -780,7 +780,7 @@ mpc52xx_ata_probe(struct platform_device *op)
 	}
 
 	task_irq = bcom_get_task_irq(dmatsk);
-	ret = request_irq(task_irq, &mpc52xx_ata_task_irq, IRQF_DISABLED,
+	ret = request_irq(task_irq, &mpc52xx_ata_task_irq, 0,
 				"ATA task", priv);
 	if (ret) {
 		dev_err(&op->dev, "error requesting DMA IRQ\n");

drivers/ata/pata_of_platform.c

@@ -11,6 +11,8 @@
 
 #include <linux/kernel.h>
 #include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
 #include <linux/of_platform.h>
 #include <linux/ata_platform.h>
 
@@ -57,11 +59,11 @@ static int __devinit pata_of_platform_probe(struct platform_device *ofdev)
 
 	prop = of_get_property(dn, "reg-shift", NULL);
 	if (prop)
-		reg_shift = *prop;
+		reg_shift = be32_to_cpup(prop);
 
 	prop = of_get_property(dn, "pio-mode", NULL);
 	if (prop) {
-		pio_mode = *prop;
+		pio_mode = be32_to_cpup(prop);
 		if (pio_mode > 6) {
 			dev_err(&ofdev->dev, "invalid pio-mode\n");
 			return -EINVAL;

drivers/ata/pata_pdc2027x.c

@@ -63,6 +63,7 @@ enum {
 };
 
 static int pdc2027x_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
+static int pdc2027x_reinit_one(struct pci_dev *pdev);
 static int pdc2027x_prereset(struct ata_link *link, unsigned long deadline);
 static void pdc2027x_set_piomode(struct ata_port *ap, struct ata_device *adev);
 static void pdc2027x_set_dmamode(struct ata_port *ap, struct ata_device *adev);
@@ -126,6 +127,10 @@ static struct pci_driver pdc2027x_pci_driver = {
 	.id_table		= pdc2027x_pci_tbl,
 	.probe			= pdc2027x_init_one,
 	.remove			= ata_pci_remove_one,
+#ifdef CONFIG_PM
+	.suspend		= ata_pci_device_suspend,
+	.resume			= pdc2027x_reinit_one,
+#endif
 };
 
 static struct scsi_host_template pdc2027x_sht = {
@@ -754,6 +759,31 @@ static int __devinit pdc2027x_init_one(struct pci_dev *pdev, const struct pci_de
 				 IRQF_SHARED, &pdc2027x_sht);
 }
 
+#ifdef CONFIG_PM
+static int pdc2027x_reinit_one(struct pci_dev *pdev)
+{
+	struct ata_host *host = dev_get_drvdata(&pdev->dev);
+	unsigned int board_idx;
+	int rc;
+
+	rc = ata_pci_device_do_resume(pdev);
+	if (rc)
+		return rc;
+
+	if (pdev->device == PCI_DEVICE_ID_PROMISE_20268 ||
+	    pdev->device == PCI_DEVICE_ID_PROMISE_20270)
+		board_idx = PDC_UDMA_100;
+	else
+		board_idx = PDC_UDMA_133;
+
+	if (pdc_hardware_init(host, board_idx))
+		return -EIO;
+
+	ata_host_resume(host);
+	return 0;
+}
+#endif
+
 /**
  * pdc2027x_init - Called after this module is loaded into the kernel.
  */

drivers/ata/pata_qdi.c

@@ -1,366 +0,0 @@
-/*
- *    pata_qdi.c - QDI VLB ATA controllers
- *	(C) 2006 Red Hat
- *
- * This driver mostly exists as a proof of concept for non PCI devices under
- * libata. While the QDI6580 was 'neat' in 1993 it is no longer terribly
- * useful.
- *
- * Tuning code written from the documentation at
- * http://www.ryston.cz/petr/vlb/qd6500.html
- * http://www.ryston.cz/petr/vlb/qd6580.html
- *
- * Probe code based on drivers/ide/legacy/qd65xx.c
- * Rewritten from the work of Colten Edwards <pje120@cs.usask.ca> by
- * Samuel Thibault <samuel.thibault@ens-lyon.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/blkdev.h>
-#include <linux/delay.h>
-#include <scsi/scsi_host.h>
-#include <linux/libata.h>
-#include <linux/platform_device.h>
-
-#define DRV_NAME "pata_qdi"
-#define DRV_VERSION "0.3.1"
-
-#define NR_HOST 4	/* Two 6580s */
-
-struct qdi_data {
-	unsigned long timing;
-	u8 clock[2];
-	u8 last;
-	int fast;
-	struct platform_device *platform_dev;
-
-};
-
-static struct ata_host *qdi_host[NR_HOST];
-static struct qdi_data qdi_data[NR_HOST];
-static int nr_qdi_host;
-
-#ifdef MODULE
-static int probe_qdi = 1;
-#else
-static int probe_qdi;
-#endif
-
-static void qdi6500_set_piomode(struct ata_port *ap, struct ata_device *adev)
-{
-	struct ata_timing t;
-	struct qdi_data *qdi = ap->host->private_data;
-	int active, recovery;
-	u8 timing;
-
-	/* Get the timing data in cycles */
-	ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000);
-
-	if (qdi->fast) {
-		active = 8 - clamp_val(t.active, 1, 8);
-		recovery = 18 - clamp_val(t.recover, 3, 18);
-	} else {
-		active = 9 - clamp_val(t.active, 2, 9);
-		recovery = 15 - clamp_val(t.recover, 0, 15);
-	}
-	timing = (recovery << 4) | active | 0x08;
-
-	qdi->clock[adev->devno] = timing;
-
-	outb(timing, qdi->timing);
-}
-
-static void qdi6580_set_piomode(struct ata_port *ap, struct ata_device *adev)
-{
-	struct ata_timing t;
-	struct qdi_data *qdi = ap->host->private_data;
-	int active, recovery;
-	u8 timing;
-
-	/* Get the timing data in cycles */
-	ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000);
-
-	if (qdi->fast) {
-		active = 8 - clamp_val(t.active, 1, 8);
-		recovery = 18 - clamp_val(t.recover, 3, 18);
-	} else {
-		active = 9 - clamp_val(t.active, 2, 9);
-		recovery = 15 - clamp_val(t.recover, 0, 15);
-	}
-	timing = (recovery << 4) | active | 0x08;
-
-	qdi->clock[adev->devno] = timing;
-
-	outb(timing, qdi->timing);
-
-	/* Clear the FIFO */
-	if (adev->class != ATA_DEV_ATA)
-		outb(0x5F, (qdi->timing & 0xFFF0) + 3);
-}
-
-/**
- *	qdi_qc_issue		-	command issue
- *	@qc: command pending
- *
- *	Called when the libata layer is about to issue a command. We wrap
- *	this interface so that we can load the correct ATA timings.
- */
-
-static unsigned int qdi_qc_issue(struct ata_queued_cmd *qc)
-{
-	struct ata_port *ap = qc->ap;
-	struct ata_device *adev = qc->dev;
-	struct qdi_data *qdi = ap->host->private_data;
-
-	if (qdi->clock[adev->devno] != qdi->last) {
-		if (adev->pio_mode) {
-			qdi->last = qdi->clock[adev->devno];
-			outb(qdi->clock[adev->devno], qdi->timing);
-		}
-	}
-	return ata_sff_qc_issue(qc);
-}
-
-static unsigned int qdi_data_xfer(struct ata_device *dev, unsigned char *buf,
-				  unsigned int buflen, int rw)
-{
-	if (ata_id_has_dword_io(dev->id)) {
-		struct ata_port *ap = dev->link->ap;
-		int slop = buflen & 3;
-
-		if (rw == READ)
-			ioread32_rep(ap->ioaddr.data_addr, buf, buflen >> 2);
-		else
-			iowrite32_rep(ap->ioaddr.data_addr, buf, buflen >> 2);
-
-		if (unlikely(slop)) {
-			__le32 pad;
-			if (rw == READ) {
-				pad = cpu_to_le32(ioread32(ap->ioaddr.data_addr));
-				memcpy(buf + buflen - slop, &pad, slop);
-			} else {
-				memcpy(&pad, buf + buflen - slop, slop);
-				iowrite32(le32_to_cpu(pad), ap->ioaddr.data_addr);
-			}
-			buflen += 4 - slop;
-		}
-	} else
-		buflen = ata_sff_data_xfer(dev, buf, buflen, rw);
-
-	return buflen;
-}
-
-static struct scsi_host_template qdi_sht = {
-	ATA_PIO_SHT(DRV_NAME),
-};
-
-static struct ata_port_operations qdi6500_port_ops = {
-	.inherits	= &ata_sff_port_ops,
-	.qc_issue	= qdi_qc_issue,
-	.sff_data_xfer	= qdi_data_xfer,
-	.cable_detect	= ata_cable_40wire,
-	.set_piomode	= qdi6500_set_piomode,
-};
-
-static struct ata_port_operations qdi6580_port_ops = {
-	.inherits	= &qdi6500_port_ops,
-	.set_piomode	= qdi6580_set_piomode,
-};
-
-/**
- *	qdi_init_one		-	attach a qdi interface
- *	@type: Type to display
- *	@io: I/O port start
- *	@irq: interrupt line
- *	@fast: True if on a > 33Mhz VLB
- *
- *	Register an ISA bus IDE interface. Such interfaces are PIO and we
- *	assume do not support IRQ sharing.
- */
-
-static __init int qdi_init_one(unsigned long port, int type, unsigned long io, int irq, int fast)
-{
-	unsigned long ctl = io + 0x206;
-	struct platform_device *pdev;
-	struct ata_host *host;
-	struct ata_port *ap;
-	void __iomem *io_addr, *ctl_addr;
-	int ret;
-
-	/*
-	 *	Fill in a probe structure first of all
-	 */
-
-	pdev = platform_device_register_simple(DRV_NAME, nr_qdi_host, NULL, 0);
-	if (IS_ERR(pdev))
-		return PTR_ERR(pdev);
-
-	ret = -ENOMEM;
-	io_addr = devm_ioport_map(&pdev->dev, io, 8);
-	ctl_addr = devm_ioport_map(&pdev->dev, ctl, 1);
-	if (!io_addr || !ctl_addr)
-		goto fail;
-
-	ret = -ENOMEM;
-	host = ata_host_alloc(&pdev->dev, 1);
-	if (!host)
-		goto fail;
-	ap = host->ports[0];
-
-	if (type == 6580) {
-		ap->ops = &qdi6580_port_ops;
-		ap->pio_mask = ATA_PIO4;
-		ap->flags |= ATA_FLAG_SLAVE_POSS;
-	} else {
-		ap->ops = &qdi6500_port_ops;
-		ap->pio_mask = ATA_PIO2; /* Actually PIO3 !IORDY is possible */
-		ap->flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_NO_IORDY;
-	}
-
-	ap->ioaddr.cmd_addr = io_addr;
-	ap->ioaddr.altstatus_addr = ctl_addr;
-	ap->ioaddr.ctl_addr = ctl_addr;
-	ata_sff_std_ports(&ap->ioaddr);
-
-	ata_port_desc(ap, "cmd %lx ctl %lx", io, ctl);
-
-	/*
-	 *	Hook in a private data structure per channel
-	 */
-	ap->private_data = &qdi_data[nr_qdi_host];
-
-	qdi_data[nr_qdi_host].timing = port;
-	qdi_data[nr_qdi_host].fast = fast;
-	qdi_data[nr_qdi_host].platform_dev = pdev;
-
-	printk(KERN_INFO DRV_NAME": qd%d at 0x%lx.\n", type, io);
-
-	/* activate */
-	ret = ata_host_activate(host, irq, ata_sff_interrupt, 0, &qdi_sht);
-	if (ret)
-		goto fail;
-
-	qdi_host[nr_qdi_host++] = dev_get_drvdata(&pdev->dev);
-	return 0;
-
- fail:
-	platform_device_unregister(pdev);
-	return ret;
-}
-
-/**
- *	qdi_init		-	attach qdi interfaces
- *
- *	Attach qdi IDE interfaces by scanning the ports it may occupy.
- */
-
-static __init int qdi_init(void)
-{
-	unsigned long flags;
-	static const unsigned long qd_port[2] = { 0x30, 0xB0 };
-	static const unsigned long ide_port[2] = { 0x170, 0x1F0 };
-	static const int ide_irq[2] = { 14, 15 };
-
-	int ct = 0;
-	int i;
-
-	if (probe_qdi == 0)
-		return -ENODEV;
-
-	/*
- 	 *	Check each possible QD65xx base address
-	 */
-
-	for (i = 0; i < 2; i++) {
-		unsigned long port = qd_port[i];
-		u8 r, res;
-
-
-		if (request_region(port, 2, "pata_qdi")) {
-			/* Check for a card */
-			local_irq_save(flags);
-			r = inb_p(port);
-			outb_p(0x19, port);
-			res = inb_p(port);
-			outb_p(r, port);
-			local_irq_restore(flags);
-
-			/* Fail */
-			if (res == 0x19)
-			{
-				release_region(port, 2);
-				continue;
-			}
-
-			/* Passes the presence test */
-			r = inb_p(port + 1);	/* Check port agrees with port set */
-			if ((r & 2) >> 1 != i) {
-				release_region(port, 2);
-				continue;
-			}
-
-			/* Check card type */
-			if ((r & 0xF0) == 0xC0) {
-				/* QD6500: single channel */
-				if (r & 8) {
-					/* Disabled ? */
-					release_region(port, 2);
-					continue;
-				}
-				if (qdi_init_one(port, 6500, ide_port[r & 0x01], ide_irq[r & 0x01], r & 0x04) == 0)
-					ct++;
-			}
-			if (((r & 0xF0) == 0xA0) || (r & 0xF0) == 0x50) {
-				/* QD6580: dual channel */
-				if (!request_region(port + 2 , 2, "pata_qdi"))
-				{
-					release_region(port, 2);
-					continue;
-				}
-				res = inb(port + 3);
-				if (res & 1) {
-					/* Single channel mode */
-					if (qdi_init_one(port, 6580, ide_port[r & 0x01], ide_irq[r & 0x01], r & 0x04) == 0)
-						ct++;
-				} else {
-					/* Dual channel mode */
-					if (qdi_init_one(port, 6580, 0x1F0, 14, r & 0x04) == 0)
-						ct++;
-					if (qdi_init_one(port + 2, 6580, 0x170, 15, r & 0x04) == 0)
-						ct++;
-				}
-			}
-		}
-	}
-	if (ct != 0)
-		return 0;
-	return -ENODEV;
-}
-
-static __exit void qdi_exit(void)
-{
-	int i;
-
-	for (i = 0; i < nr_qdi_host; i++) {
-		ata_host_detach(qdi_host[i]);
-		/* Free the control resource. The 6580 dual channel has the resources
-		 * claimed as a pair of 2 byte resources so we need no special cases...
-		 */
-		release_region(qdi_data[i].timing, 2);
-		platform_device_unregister(qdi_data[i].platform_dev);
-	}
-}
-
-MODULE_AUTHOR("Alan Cox");
-MODULE_DESCRIPTION("low-level driver for qdi ATA");
-MODULE_LICENSE("GPL");
-MODULE_VERSION(DRV_VERSION);
-
-module_init(qdi_init);
-module_exit(qdi_exit);
-
-module_param(probe_qdi, int, 0);
-

drivers/ata/pata_rdc.c

@@ -86,6 +86,8 @@ static int rdc_pata_prereset(struct ata_link *link, unsigned long deadline)
 	return ata_sff_prereset(link, deadline);
 }
 
+static DEFINE_SPINLOCK(rdc_lock);
+
 /**
  *	rdc_set_piomode - Initialize host controller PATA PIO timings
  *	@ap: Port whose timings we are configuring
@@ -101,6 +103,7 @@ static void rdc_set_piomode(struct ata_port *ap, struct ata_device *adev)
 {
 	unsigned int pio	= adev->pio_mode - XFER_PIO_0;
 	struct pci_dev *dev	= to_pci_dev(ap->host->dev);
+	unsigned long flags;
 	unsigned int is_slave	= (adev->devno != 0);
 	unsigned int master_port= ap->port_no ? 0x42 : 0x40;
 	unsigned int slave_port	= 0x44;
@@ -124,6 +127,8 @@ static void rdc_set_piomode(struct ata_port *ap, struct ata_device *adev)
 	if (adev->class == ATA_DEV_ATA)
 		control |= 4;	/* PPE enable */
 
+	spin_lock_irqsave(&rdc_lock, flags);
+
 	/* PIO configuration clears DTE unconditionally.  It will be
 	 * programmed in set_dmamode which is guaranteed to be called
 	 * after set_piomode if any DMA mode is available.
@@ -161,6 +166,8 @@ static void rdc_set_piomode(struct ata_port *ap, struct ata_device *adev)
 	pci_read_config_byte(dev, 0x48, &udma_enable);
 	udma_enable &= ~(1 << (2 * ap->port_no + adev->devno));
 	pci_write_config_byte(dev, 0x48, udma_enable);
+
+	spin_unlock_irqrestore(&rdc_lock, flags);
 }
 
 /**
@@ -177,6 +184,7 @@ static void rdc_set_piomode(struct ata_port *ap, struct ata_device *adev)
 static void rdc_set_dmamode(struct ata_port *ap, struct ata_device *adev)
 {
 	struct pci_dev *dev	= to_pci_dev(ap->host->dev);
+	unsigned long flags;
 	u8 master_port		= ap->port_no ? 0x42 : 0x40;
 	u16 master_data;
 	u8 speed		= adev->dma_mode;
@@ -190,6 +198,8 @@ static void rdc_set_dmamode(struct ata_port *ap, struct ata_device *adev)
 			    { 2, 1 },
 			    { 2, 3 }, };
 
+	spin_lock_irqsave(&rdc_lock, flags);
+
 	pci_read_config_word(dev, master_port, &master_data);
 	pci_read_config_byte(dev, 0x48, &udma_enable);
 
@@ -271,6 +281,8 @@ static void rdc_set_dmamode(struct ata_port *ap, struct ata_device *adev)
 		pci_write_config_word(dev, master_port, master_data);
 	}
 	pci_write_config_byte(dev, 0x48, udma_enable);
+
+	spin_unlock_irqrestore(&rdc_lock, flags);
 }
 
 static struct ata_port_operations rdc_pata_ops = {
@@ -375,6 +387,10 @@ static struct pci_driver rdc_pci_driver = {
 	.id_table		= rdc_pci_tbl,
 	.probe			= rdc_init_one,
 	.remove			= rdc_remove_one,
+#ifdef CONFIG_PM
+	.suspend		= ata_pci_device_suspend,
+	.resume			= ata_pci_device_resume,
+#endif
 };
 
 

drivers/ata/pata_sc1200.c

@@ -38,7 +38,7 @@
 #include <scsi/scsi_host.h>
 #include <linux/libata.h>
 
-#define DRV_NAME	"sc1200"
+#define DRV_NAME	"pata_sc1200"
 #define DRV_VERSION	"0.2.6"
 
 #define SC1200_REV_A	0x00
@@ -86,10 +86,14 @@ static int sc1200_clock(void)
 static void sc1200_set_piomode(struct ata_port *ap, struct ata_device *adev)
 {
 	static const u32 pio_timings[4][5] = {
-		{0x00009172, 0x00012171, 0x00020080, 0x00032010, 0x00040010},	// format0  33Mhz
-		{0xd1329172, 0x71212171, 0x30200080, 0x20102010, 0x00100010},	// format1, 33Mhz
-		{0xfaa3f4f3, 0xc23232b2, 0x513101c1, 0x31213121, 0x10211021},	// format1, 48Mhz
-		{0xfff4fff4, 0xf35353d3, 0x814102f1, 0x42314231, 0x11311131}	// format1, 66Mhz
+		/* format0, 33Mhz */
+		{ 0x00009172, 0x00012171, 0x00020080, 0x00032010, 0x00040010 },
+		/* format1, 33Mhz */
+		{ 0xd1329172, 0x71212171, 0x30200080, 0x20102010, 0x00100010 },
+		/* format1, 48Mhz */
+		{ 0xfaa3f4f3, 0xc23232b2, 0x513101c1, 0x31213121, 0x10211021 },
+		/* format1, 66Mhz */
+		{ 0xfff4fff4, 0xf35353d3, 0x814102f1, 0x42314231, 0x11311131 }
 	};
 
 	struct pci_dev *pdev = to_pci_dev(ap->host->dev);

drivers/ata/pata_scc.c

@@ -825,18 +825,6 @@ static unsigned int scc_data_xfer (struct ata_device *dev, unsigned char *buf,
 	return words << 1;
 }
 
-/**
- *	scc_pata_prereset - prepare for reset
- *	@ap: ATA port to be reset
- *	@deadline: deadline jiffies for the operation
- */
-
-static int scc_pata_prereset(struct ata_link *link, unsigned long deadline)
-{
-	link->ap->cbl = ATA_CBL_PATA80;
-	return ata_sff_prereset(link, deadline);
-}
-
 /**
  *	scc_postreset - standard postreset callback
  *	@ap: the target ata_port
@@ -946,7 +934,7 @@ static struct ata_port_operations scc_pata_ops = {
 	.bmdma_status		= scc_bmdma_status,
 	.sff_data_xfer		= scc_data_xfer,
 
-	.prereset		= scc_pata_prereset,
+	.cable_detect		= ata_cable_80wire,
 	.softreset		= scc_softreset,
 	.postreset		= scc_postreset,
 

drivers/ata/pata_serverworks.c

@@ -58,31 +58,15 @@ static const char *csb_bad_ata100[] = {
 };
 
 /**
- *	dell_cable	-	Dell serverworks cable detection
+ *	oem_cable	-	Dell/Sun serverworks cable detection
  *	@ap: ATA port to do cable detect
  *
- *	Dell hide the 40/80 pin select for their interfaces in the top two
- *	bits of the subsystem ID.
+ *	Dell PowerEdge and Sun Cobalt 'Alpine' hide the 40/80 pin select
+ *	for their interfaces in the top two bits of the subsystem ID.
  */
 
-static int dell_cable(struct ata_port *ap) {
-	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
-
-	if (pdev->subsystem_device & (1 << (ap->port_no + 14)))
-		return ATA_CBL_PATA80;
-	return ATA_CBL_PATA40;
-}
-
-/**
- *	sun_cable	-	Sun Cobalt 'Alpine' cable detection
- *	@ap: ATA port to do cable select
- *
- *	Cobalt CSB5 IDE hides the 40/80pin in the top two bits of the
- *	subsystem ID the same as dell. We could use one function but we may
- *	need to extend the Dell one in future
- */
-
-static int sun_cable(struct ata_port *ap) {
+static int oem_cable(struct ata_port *ap)
+{
 	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
 
 	if (pdev->subsystem_device & (1 << (ap->port_no + 14)))
@@ -90,49 +74,21 @@ static int sun_cable(struct ata_port *ap) {
 	return ATA_CBL_PATA40;
 }
 
-/**
- *	osb4_cable	-	OSB4 cable detect
- *	@ap: ATA port to check
- *
- *	The OSB4 isn't UDMA66 capable so this is easy
- */
-
-static int osb4_cable(struct ata_port *ap) {
-	return ATA_CBL_PATA40;
-}
-
-/**
- *	csb_cable	-	CSB5/6 cable detect
- *	@ap: ATA port to check
- *
- *	Serverworks default arrangement is to use the drive side detection
- *	only.
- */
-
-static int csb_cable(struct ata_port *ap) {
-	return ATA_CBL_PATA_UNK;
-}
-
 struct sv_cable_table {
 	int device;
 	int subvendor;
 	int (*cable_detect)(struct ata_port *ap);
 };
 
-/*
- *	Note that we don't copy the old serverworks code because the old
- *	code contains obvious mistakes
- */
-
 static struct sv_cable_table cable_detect[] = {
-	{ PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, PCI_VENDOR_ID_DELL, dell_cable },
-	{ PCI_DEVICE_ID_SERVERWORKS_CSB6IDE, PCI_VENDOR_ID_DELL, dell_cable },
-	{ PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, PCI_VENDOR_ID_SUN,  sun_cable },
-	{ PCI_DEVICE_ID_SERVERWORKS_OSB4IDE, PCI_ANY_ID, osb4_cable },
-	{ PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, PCI_ANY_ID, csb_cable },
-	{ PCI_DEVICE_ID_SERVERWORKS_CSB6IDE, PCI_ANY_ID, csb_cable },
-	{ PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2, PCI_ANY_ID, csb_cable },
-	{ PCI_DEVICE_ID_SERVERWORKS_HT1000IDE, PCI_ANY_ID, csb_cable },
+	{ PCI_DEVICE_ID_SERVERWORKS_CSB5IDE,   PCI_VENDOR_ID_DELL, oem_cable },
+	{ PCI_DEVICE_ID_SERVERWORKS_CSB6IDE,   PCI_VENDOR_ID_DELL, oem_cable },
+	{ PCI_DEVICE_ID_SERVERWORKS_CSB5IDE,   PCI_VENDOR_ID_SUN,  oem_cable },
+	{ PCI_DEVICE_ID_SERVERWORKS_OSB4IDE,   PCI_ANY_ID, ata_cable_40wire  },
+	{ PCI_DEVICE_ID_SERVERWORKS_CSB5IDE,   PCI_ANY_ID, ata_cable_unknown },
+	{ PCI_DEVICE_ID_SERVERWORKS_CSB6IDE,   PCI_ANY_ID, ata_cable_unknown },
+	{ PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2,  PCI_ANY_ID, ata_cable_unknown },
+	{ PCI_DEVICE_ID_SERVERWORKS_HT1000IDE, PCI_ANY_ID, ata_cable_unknown },
 	{ }
 };
 
@@ -393,6 +349,31 @@ static void serverworks_fixup_ht1000(struct pci_dev *pdev)
 	pci_write_config_byte(pdev, 0x5A, btr);
 }
 
+static int serverworks_fixup(struct pci_dev *pdev)
+{
+	int rc = 0;
+
+	/* Force master latency timer to 64 PCI clocks */
+	pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x40);
+
+	switch (pdev->device) {
+	case PCI_DEVICE_ID_SERVERWORKS_OSB4IDE:
+		rc = serverworks_fixup_osb4(pdev);
+		break;
+	case PCI_DEVICE_ID_SERVERWORKS_CSB5IDE:
+		ata_pci_bmdma_clear_simplex(pdev);
+		/* fall through */
+	case PCI_DEVICE_ID_SERVERWORKS_CSB6IDE:
+	case PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2:
+		rc = serverworks_fixup_csb(pdev);
+		break;
+	case PCI_DEVICE_ID_SERVERWORKS_HT1000IDE:
+		serverworks_fixup_ht1000(pdev);
+		break;
+	}
+
+	return rc;
+}
 
 static int serverworks_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 {
@@ -430,13 +411,12 @@ static int serverworks_init_one(struct pci_dev *pdev, const struct pci_device_id
 	if (rc)
 		return rc;
 
-	/* Force master latency timer to 64 PCI clocks */
-	pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x40);
+	rc = serverworks_fixup(pdev);
 
 	/* OSB4 : South Bridge and IDE */
 	if (pdev->device == PCI_DEVICE_ID_SERVERWORKS_OSB4IDE) {
 		/* Select non UDMA capable OSB4 if we can't do fixups */
-		if ( serverworks_fixup_osb4(pdev) < 0)
+		if (rc < 0)
 			ppi[0] = &info[1];
 	}
 	/* setup CSB5/CSB6 : South Bridge and IDE option RAID */
@@ -446,19 +426,13 @@ static int serverworks_init_one(struct pci_dev *pdev, const struct pci_device_id
 
 		 /* If the returned btr is the newer revision then
 		    select the right info block */
-		 if (serverworks_fixup_csb(pdev) == 3)
+		 if (rc == 3)
 		 	ppi[0] = &info[3];
 
 		/* Is this the 3rd channel CSB6 IDE ? */
 		if (pdev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2)
 			ppi[1] = &ata_dummy_port_info;
 	}
-	/* setup HT1000E */
-	else if (pdev->device == PCI_DEVICE_ID_SERVERWORKS_HT1000IDE)
-		serverworks_fixup_ht1000(pdev);
-
-	if (pdev->device == PCI_DEVICE_ID_SERVERWORKS_CSB5IDE)
-		ata_pci_bmdma_clear_simplex(pdev);
 
 	return ata_pci_bmdma_init_one(pdev, ppi, &serverworks_sht, NULL, 0);
 }
@@ -473,24 +447,7 @@ static int serverworks_reinit_one(struct pci_dev *pdev)
 	if (rc)
 		return rc;
 
-	/* Force master latency timer to 64 PCI clocks */
-	pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x40);
-
-	switch (pdev->device) {
-		case PCI_DEVICE_ID_SERVERWORKS_OSB4IDE:
-			serverworks_fixup_osb4(pdev);
-			break;
-		case PCI_DEVICE_ID_SERVERWORKS_CSB5IDE:
-			ata_pci_bmdma_clear_simplex(pdev);
-			/* fall through */
-		case PCI_DEVICE_ID_SERVERWORKS_CSB6IDE:
-		case PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2:
-			serverworks_fixup_csb(pdev);
-			break;
-		case PCI_DEVICE_ID_SERVERWORKS_HT1000IDE:
-			serverworks_fixup_ht1000(pdev);
-			break;
-	}
+	(void)serverworks_fixup(pdev);
 
 	ata_host_resume(host);
 	return 0;

drivers/ata/pata_sil680.c

@@ -38,11 +38,12 @@
 
 /**
  *	sil680_selreg		-	return register base
- *	@hwif: interface
+ *	@ap: ATA interface
  *	@r: config offset
  *
- *	Turn a config register offset into the right address in either
- *	PCI space or MMIO space to access the control register in question
+ *	Turn a config register offset into the right address in PCI space
+ *	to access the control register in question.
+ *
  *	Thankfully this is a configuration operation so isn't performance
  *	criticial.
  */
@@ -56,12 +57,12 @@ static unsigned long sil680_selreg(struct ata_port *ap, int r)
 
 /**
  *	sil680_seldev		-	return register base
- *	@hwif: interface
+ *	@ap: ATA interface
  *	@r: config offset
  *
- *	Turn a config register offset into the right address in either
- *	PCI space or MMIO space to access the control register in question
- *	including accounting for the unit shift.
+ *	Turn a config register offset into the right address in PCI space
+ *	to access the control register in question including accounting for
+ *	the unit shift.
  */
 
 static unsigned long sil680_seldev(struct ata_port *ap, struct ata_device *adev, int r)
@@ -81,7 +82,8 @@ static unsigned long sil680_seldev(struct ata_port *ap, struct ata_device *adev,
  *	space for us.
  */
 
-static int sil680_cable_detect(struct ata_port *ap) {
+static int sil680_cable_detect(struct ata_port *ap)
+{
 	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
 	unsigned long addr = sil680_selreg(ap, 0);
 	u8 ata66;
@@ -93,7 +95,7 @@ static int sil680_cable_detect(struct ata_port *ap) {
 }
 
 /**
- *	sil680_set_piomode	-	set initial PIO mode data
+ *	sil680_set_piomode	-	set PIO mode data
  *	@ap: ATA interface
  *	@adev: ATA device
  *
@@ -104,8 +106,12 @@ static int sil680_cable_detect(struct ata_port *ap) {
 
 static void sil680_set_piomode(struct ata_port *ap, struct ata_device *adev)
 {
-	static u16 speed_p[5] = { 0x328A, 0x2283, 0x1104, 0x10C3, 0x10C1 };
-	static u16 speed_t[5] = { 0x328A, 0x2283, 0x1281, 0x10C3, 0x10C1 };
+	static const u16 speed_p[5] = {
+		0x328A, 0x2283, 0x1104, 0x10C3, 0x10C1
+	};
+	static const u16 speed_t[5] = {
+		0x328A, 0x2283, 0x1281, 0x10C3, 0x10C1
+	};
 
 	unsigned long tfaddr = sil680_selreg(ap, 0x02);
 	unsigned long addr = sil680_seldev(ap, adev, 0x04);
@@ -140,22 +146,23 @@ static void sil680_set_piomode(struct ata_port *ap, struct ata_device *adev)
 }
 
 /**
- *	sil680_set_dmamode	-	set initial DMA mode data
+ *	sil680_set_dmamode	-	set DMA mode data
  *	@ap: ATA interface
  *	@adev: ATA device
  *
- *	Program the MWDMA/UDMA modes for the sil680 k
- *	chipset. The MWDMA mode values are pulled from a lookup table
+ *	Program the MWDMA/UDMA modes for the sil680 chipset.
+ *
+ *	The MWDMA mode values are pulled from a lookup table
  *	while the chipset uses mode number for UDMA.
  */
 
 static void sil680_set_dmamode(struct ata_port *ap, struct ata_device *adev)
 {
-	static u8 ultra_table[2][7] = {
+	static const u8 ultra_table[2][7] = {
 		{ 0x0C, 0x07, 0x05, 0x04, 0x02, 0x01, 0xFF },	/* 100MHz */
 		{ 0x0F, 0x0B, 0x07, 0x05, 0x03, 0x02, 0x01 },	/* 133Mhz */
 	};
-	static u16 dma_table[3] = { 0x2208, 0x10C2, 0x10C1 };
+	static const u16 dma_table[3] = { 0x2208, 0x10C2, 0x10C1 };
 
 	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
 	unsigned long ma = sil680_seldev(ap, adev, 0x08);
@@ -175,7 +182,7 @@ static void sil680_set_dmamode(struct ata_port *ap, struct ata_device *adev)
 	mode &= ~(0x03 << port_shift);
 
 	/* Extract scsc */
-	scsc = (scsc & 0x30) ? 1: 0;
+	scsc = (scsc & 0x30) ? 1 : 0;
 
 	if (adev->dma_mode >= XFER_UDMA_0) {
 		multi = 0x10C1;
@@ -248,7 +255,7 @@ static u8 sil680_init_chip(struct pci_dev *pdev, int *try_mmio)
 {
 	u8 tmpbyte	= 0;
 
-        /* FIXME: double check */
+	/* FIXME: double check */
 	pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE,
 			      pdev->revision ? 1 : 255);
 
@@ -266,22 +273,22 @@ static u8 sil680_init_chip(struct pci_dev *pdev, int *try_mmio)
 		*try_mmio = (tmpbyte & 1) || pci_resource_start(pdev, 5);
 #endif
 
-	switch(tmpbyte & 0x30) {
-		case 0x00:
-			/* 133 clock attempt to force it on */
-			pci_write_config_byte(pdev, 0x8A, tmpbyte|0x10);
-			break;
-		case 0x30:
-			/* if clocking is disabled */
-			/* 133 clock attempt to force it on */
-			pci_write_config_byte(pdev, 0x8A, tmpbyte & ~0x20);
-			break;
-		case 0x10:
-			/* 133 already */
-			break;
-		case 0x20:
-			/* BIOS set PCI x2 clocking */
-			break;
+	switch (tmpbyte & 0x30) {
+	case 0x00:
+		/* 133 clock attempt to force it on */
+		pci_write_config_byte(pdev, 0x8A, tmpbyte|0x10);
+		break;
+	case 0x30:
+		/* if clocking is disabled */
+		/* 133 clock attempt to force it on */
+		pci_write_config_byte(pdev, 0x8A, tmpbyte & ~0x20);
+		break;
+	case 0x10:
+		/* 133 already */
+		break;
+	case 0x20:
+		/* BIOS set PCI x2 clocking */
+		break;
 	}
 
 	pci_read_config_byte(pdev,   0x8A, &tmpbyte);
@@ -299,12 +306,19 @@ static u8 sil680_init_chip(struct pci_dev *pdev, int *try_mmio)
 	pci_write_config_dword(pdev, 0xB8, 0x43924392);
 	pci_write_config_dword(pdev, 0xBC, 0x40094009);
 
-	switch(tmpbyte & 0x30) {
-		case 0x00: printk(KERN_INFO "sil680: 100MHz clock.\n");break;
-		case 0x10: printk(KERN_INFO "sil680: 133MHz clock.\n");break;
-		case 0x20: printk(KERN_INFO "sil680: Using PCI clock.\n");break;
-		/* This last case is _NOT_ ok */
-		case 0x30: printk(KERN_ERR "sil680: Clock disabled ?\n");
+	switch (tmpbyte & 0x30) {
+	case 0x00:
+		printk(KERN_INFO "sil680: 100MHz clock.\n");
+		break;
+	case 0x10:
+		printk(KERN_INFO "sil680: 133MHz clock.\n");
+		break;
+	case 0x20:
+		printk(KERN_INFO "sil680: Using PCI clock.\n");
+		break;
+	/* This last case is _NOT_ ok */
+	case 0x30:
+		printk(KERN_ERR "sil680: Clock disabled ?\n");
 	}
 	return tmpbyte & 0x30;
 }

drivers/ata/pata_sis.c

@@ -55,7 +55,7 @@ static const struct sis_laptop sis_laptop[] = {
 	/* devid, subvendor, subdev */
 	{ 0x5513, 0x1043, 0x1107 },	/* ASUS A6K */
 	{ 0x5513, 0x1734, 0x105F },	/* FSC Amilo A1630 */
-	{ 0x5513, 0x1071, 0x8640 },     /* EasyNote K5305 */
+	{ 0x5513, 0x1071, 0x8640 },	/* EasyNote K5305 */
 	/* end marker */
 	{ 0, }
 };
@@ -76,7 +76,7 @@ static int sis_short_ata40(struct pci_dev *dev)
 }
 
 /**
- *	sis_old_port_base		-	return PCI configuration base for dev
+ *	sis_old_port_base - return PCI configuration base for dev
  *	@adev: device
  *
  *	Returns the base of the PCI configuration registers for this port
@@ -85,11 +85,34 @@ static int sis_short_ata40(struct pci_dev *dev)
 
 static int sis_old_port_base(struct ata_device *adev)
 {
-	return  0x40 + (4 * adev->link->ap->port_no) +  (2 * adev->devno);
+	return 0x40 + (4 * adev->link->ap->port_no) + (2 * adev->devno);
 }
 
 /**
- *	sis_133_cable_detect	-	check for 40/80 pin
+ *	sis_port_base - return PCI configuration base for dev
+ *	@adev: device
+ *
+ *	Returns the base of the PCI configuration registers for this port
+ *	number.
+ */
+
+static int sis_port_base(struct ata_device *adev)
+{
+	struct ata_port *ap = adev->link->ap;
+	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+	int port = 0x40;
+	u32 reg54;
+
+	/* If bit 30 is set then the registers are mapped at 0x70 not 0x40 */
+	pci_read_config_dword(pdev, 0x54, &reg54);
+	if (reg54 & 0x40000000)
+		port = 0x70;
+
+	return port + (8 * ap->port_no) + (4 * adev->devno);
+}
+
+/**
+ *	sis_133_cable_detect - check for 40/80 pin
  *	@ap: Port
  *	@deadline: deadline jiffies for the operation
  *
@@ -110,7 +133,7 @@ static int sis_133_cable_detect(struct ata_port *ap)
 }
 
 /**
- *	sis_66_cable_detect	-	check for 40/80 pin
+ *	sis_66_cable_detect - check for 40/80 pin
  *	@ap: Port
  *
  *	Perform cable detection on the UDMA66, UDMA100 and early UDMA133
@@ -132,7 +155,7 @@ static int sis_66_cable_detect(struct ata_port *ap)
 
 
 /**
- *	sis_pre_reset		-	probe begin
+ *	sis_pre_reset - probe begin
  *	@link: ATA link
  *	@deadline: deadline jiffies for the operation
  *
@@ -160,7 +183,7 @@ static int sis_pre_reset(struct ata_link *link, unsigned long deadline)
 
 
 /**
- *	sis_set_fifo	-	Set RWP fifo bits for this device
+ *	sis_set_fifo - Set RWP fifo bits for this device
  *	@ap: Port
  *	@adev: Device
  *
@@ -203,13 +226,13 @@ static void sis_set_fifo(struct ata_port *ap, struct ata_device *adev)
 
 static void sis_old_set_piomode (struct ata_port *ap, struct ata_device *adev)
 {
-	struct pci_dev *pdev	= to_pci_dev(ap->host->dev);
+	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
 	int port = sis_old_port_base(adev);
 	u8 t1, t2;
 	int speed = adev->pio_mode - XFER_PIO_0;
 
-	const u8 active[]   = { 0x00, 0x07, 0x04, 0x03, 0x01 };
-	const u8 recovery[] = { 0x00, 0x06, 0x04, 0x03, 0x03 };
+	static const u8 active[]   = { 0x00, 0x07, 0x04, 0x03, 0x01 };
+	static const u8 recovery[] = { 0x00, 0x06, 0x04, 0x03, 0x03 };
 
 	sis_set_fifo(ap, adev);
 
@@ -240,11 +263,11 @@ static void sis_old_set_piomode (struct ata_port *ap, struct ata_device *adev)
 
 static void sis_100_set_piomode (struct ata_port *ap, struct ata_device *adev)
 {
-	struct pci_dev *pdev	= to_pci_dev(ap->host->dev);
+	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
 	int port = sis_old_port_base(adev);
 	int speed = adev->pio_mode - XFER_PIO_0;
 
-	const u8 actrec[] = { 0x00, 0x67, 0x44, 0x33, 0x31 };
+	static const u8 actrec[] = { 0x00, 0x67, 0x44, 0x33, 0x31 };
 
 	sis_set_fifo(ap, adev);
 
@@ -265,20 +288,19 @@ static void sis_100_set_piomode (struct ata_port *ap, struct ata_device *adev)
 
 static void sis_133_set_piomode (struct ata_port *ap, struct ata_device *adev)
 {
-	struct pci_dev *pdev	= to_pci_dev(ap->host->dev);
-	int port = 0x40;
+	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+	int port;
 	u32 t1;
-	u32 reg54;
 	int speed = adev->pio_mode - XFER_PIO_0;
 
-	const u32 timing133[] = {
+	static const u32 timing133[] = {
 		0x28269000,	/* Recovery << 24 | Act << 16 | Ini << 12 */
 		0x0C266000,
 		0x04263000,
 		0x0C0A3000,
 		0x05093000
 	};
-	const u32 timing100[] = {
+	static const u32 timing100[] = {
 		0x1E1C6000,	/* Recovery << 24 | Act << 16 | Ini << 12 */
 		0x091C4000,
 		0x031C2000,
@@ -288,12 +310,7 @@ static void sis_133_set_piomode (struct ata_port *ap, struct ata_device *adev)
 
 	sis_set_fifo(ap, adev);
 
-	/* If bit 14 is set then the registers are mapped at 0x70 not 0x40 */
-	pci_read_config_dword(pdev, 0x54, &reg54);
-	if (reg54 & 0x40000000)
-		port = 0x70;
-	port += 8 * ap->port_no +  4 * adev->devno;
-
+	port = sis_port_base(adev);
 	pci_read_config_dword(pdev, port, &t1);
 	t1 &= 0xC0C00FFF;	/* Mask out timing */
 
@@ -319,13 +336,13 @@ static void sis_133_set_piomode (struct ata_port *ap, struct ata_device *adev)
 
 static void sis_old_set_dmamode (struct ata_port *ap, struct ata_device *adev)
 {
-	struct pci_dev *pdev	= to_pci_dev(ap->host->dev);
+	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
 	int speed = adev->dma_mode - XFER_MW_DMA_0;
 	int drive_pci = sis_old_port_base(adev);
 	u16 timing;
 
-	const u16 mwdma_bits[] = { 0x008, 0x302, 0x301 };
-	const u16 udma_bits[]  = { 0xE000, 0xC000, 0xA000 };
+	static const u16 mwdma_bits[] = { 0x008, 0x302, 0x301 };
+	static const u16 udma_bits[]  = { 0xE000, 0xC000, 0xA000 };
 
 	pci_read_config_word(pdev, drive_pci, &timing);
 
@@ -358,14 +375,14 @@ static void sis_old_set_dmamode (struct ata_port *ap, struct ata_device *adev)
 
 static void sis_66_set_dmamode (struct ata_port *ap, struct ata_device *adev)
 {
-	struct pci_dev *pdev	= to_pci_dev(ap->host->dev);
+	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
 	int speed = adev->dma_mode - XFER_MW_DMA_0;
 	int drive_pci = sis_old_port_base(adev);
 	u16 timing;
 
 	/* MWDMA 0-2 and UDMA 0-5 */
-	const u16 mwdma_bits[] = { 0x008, 0x302, 0x301 };
-	const u16 udma_bits[]  = { 0xF000, 0xD000, 0xB000, 0xA000, 0x9000, 0x8000 };
+	static const u16 mwdma_bits[] = { 0x008, 0x302, 0x301 };
+	static const u16 udma_bits[]  = { 0xF000, 0xD000, 0xB000, 0xA000, 0x9000, 0x8000 };
 
 	pci_read_config_word(pdev, drive_pci, &timing);
 
@@ -397,12 +414,12 @@ static void sis_66_set_dmamode (struct ata_port *ap, struct ata_device *adev)
 
 static void sis_100_set_dmamode (struct ata_port *ap, struct ata_device *adev)
 {
-	struct pci_dev *pdev	= to_pci_dev(ap->host->dev);
+	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
 	int speed = adev->dma_mode - XFER_MW_DMA_0;
 	int drive_pci = sis_old_port_base(adev);
 	u8 timing;
 
-	const u8 udma_bits[]  = { 0x8B, 0x87, 0x85, 0x83, 0x82, 0x81};
+	static const u8 udma_bits[]  = { 0x8B, 0x87, 0x85, 0x83, 0x82, 0x81};
 
 	pci_read_config_byte(pdev, drive_pci + 1, &timing);
 
@@ -431,7 +448,7 @@ static void sis_100_set_dmamode (struct ata_port *ap, struct ata_device *adev)
 
 static void sis_133_early_set_dmamode (struct ata_port *ap, struct ata_device *adev)
 {
-	struct pci_dev *pdev	= to_pci_dev(ap->host->dev);
+	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
 	int speed = adev->dma_mode - XFER_MW_DMA_0;
 	int drive_pci = sis_old_port_base(adev);
 	u8 timing;
@@ -464,32 +481,34 @@ static void sis_133_early_set_dmamode (struct ata_port *ap, struct ata_device *a
 
 static void sis_133_set_dmamode (struct ata_port *ap, struct ata_device *adev)
 {
-	struct pci_dev *pdev	= to_pci_dev(ap->host->dev);
-	int speed = adev->dma_mode - XFER_MW_DMA_0;
-	int port = 0x40;
+	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+	int port;
 	u32 t1;
-	u32 reg54;
-
-	/* bits 4- cycle time 8 - cvs time */
-	static const u32 timing_u100[] = { 0x6B0, 0x470, 0x350, 0x140, 0x120, 0x110, 0x000 };
-	static const u32 timing_u133[] = { 0x9F0, 0x6A0, 0x470, 0x250, 0x230, 0x220, 0x210 };
-
-	/* If bit 14 is set then the registers are mapped at 0x70 not 0x40 */
-	pci_read_config_dword(pdev, 0x54, &reg54);
-	if (reg54 & 0x40000000)
-		port = 0x70;
-	port += (8 * ap->port_no) +  (4 * adev->devno);
 
+	port = sis_port_base(adev);
 	pci_read_config_dword(pdev, port, &t1);
 
 	if (adev->dma_mode < XFER_UDMA_0) {
+		/* Recovery << 24 | Act << 16 | Ini << 12, like PIO modes */
+		static const u32 timing_u100[] = { 0x19154000, 0x06072000, 0x04062000 };
+		static const u32 timing_u133[] = { 0x221C6000, 0x0C0A3000, 0x05093000 };
+		int speed = adev->dma_mode - XFER_MW_DMA_0;
+
+		t1 &= 0xC0C00FFF;
+		/* disable UDMA */
 		t1 &= ~0x00000004;
-		/* FIXME: need data sheet to add MWDMA here. Also lacking on
-		   ide/pci driver */
+		if (t1 & 0x08)
+			t1 |= timing_u133[speed];
+		else
+			t1 |= timing_u100[speed];
 	} else {
-		speed = adev->dma_mode - XFER_UDMA_0;
-		/* if & 8 no UDMA133 - need info for ... */
+		/* bits 4- cycle time 8 - cvs time */
+		static const u32 timing_u100[] = { 0x6B0, 0x470, 0x350, 0x140, 0x120, 0x110, 0x000 };
+		static const u32 timing_u133[] = { 0x9F0, 0x6A0, 0x470, 0x250, 0x230, 0x220, 0x210 };
+		int speed = adev->dma_mode - XFER_UDMA_0;
+
 		t1 &= ~0x00000FF0;
+		/* enable UDMA */
 		t1 |= 0x00000004;
 		if (t1 & 0x08)
 			t1 |= timing_u133[speed];
@@ -499,6 +518,27 @@ static void sis_133_set_dmamode (struct ata_port *ap, struct ata_device *adev)
 	pci_write_config_dword(pdev, port, t1);
 }
 
+/**
+ *	sis_133_mode_filter - mode selection filter
+ *	@adev: ATA device
+ *
+ *	Block UDMA6 on devices that do not support it.
+ */
+
+static unsigned long sis_133_mode_filter(struct ata_device *adev, unsigned long mask)
+{
+	struct ata_port *ap = adev->link->ap;
+	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+	int port = sis_port_base(adev);
+	u32 t1;
+
+	pci_read_config_dword(pdev, port, &t1);
+	/* if ATA133 is disabled, mask it out */
+	if (!(t1 & 0x08))
+		mask &= ~(0xC0 << ATA_SHIFT_UDMA);
+	return mask;
+}
+
 static struct scsi_host_template sis_sht = {
 	ATA_BMDMA_SHT(DRV_NAME),
 };
@@ -520,6 +560,7 @@ static struct ata_port_operations sis_133_ops = {
 	.set_piomode		= sis_133_set_piomode,
 	.set_dmamode		= sis_133_set_dmamode,
 	.cable_detect		= sis_133_cable_detect,
+	.mode_filter		= sis_133_mode_filter,
 };
 
 static struct ata_port_operations sis_133_early_ops = {
@@ -588,7 +629,7 @@ static const struct ata_port_info sis_info100_early = {
 static const struct ata_port_info sis_info133 = {
 	.flags		= ATA_FLAG_SLAVE_POSS,
 	.pio_mask	= ATA_PIO4,
-	/* No MWDMA */
+	.mwdma_mask	= ATA_MWDMA2,
 	.udma_mask	= ATA_UDMA6,
 	.port_ops	= &sis_133_ops,
 };
@@ -669,7 +710,7 @@ static void sis_fixup(struct pci_dev *pdev, struct sis_chipset *sis)
  *	@pdev: PCI device to register
  *	@ent: Entry in sis_pci_tbl matching with @pdev
  *
- *	Called from kernel PCI layer.  We probe for combined mode (sigh),
+ *	Called from kernel PCI layer. We probe for combined mode (sigh),
  *	and then hand over control to libata, for it to do the rest.
  *
  *	LOCKING:
@@ -769,17 +810,20 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 
 		switch(trueid) {
 		case 0x5518:	/* SIS 962/963 */
+			dev_info(&pdev->dev,
+				 "SiS 962/963 MuTIOL IDE UDMA133 controller\n");
 			chipset = &sis133;
 			if ((idemisc & 0x40000000) == 0) {
 				pci_write_config_dword(pdev, 0x54, idemisc | 0x40000000);
-				printk(KERN_INFO "SIS5513: Switching to 5513 register mapping\n");
+				dev_info(&pdev->dev,
+					 "Switching to 5513 register mapping\n");
 			}
 			break;
 		case 0x0180:	/* SIS 965/965L */
-			chipset =  &sis133;
+			chipset = &sis133;
 			break;
 		case 0x1180:	/* SIS 966/966L */
-			chipset =  &sis133;
+			chipset = &sis133;
 			break;
 		}
 	}

drivers/ata/pata_sl82c105.c

@@ -1,6 +1,7 @@
 /*
  * pata_sl82c105.c 	- SL82C105 PATA for new ATA layer
  *			  (C) 2005 Red Hat Inc
+ *			  (C) 2011 Bartlomiej Zolnierkiewicz
  *
  * Based in part on linux/drivers/ide/pci/sl82c105.c
  * 		SL82C105/Winbond 553 IDE driver
@@ -289,6 +290,14 @@ static int sl82c105_bridge_revision(struct pci_dev *pdev)
 	return bridge->revision;
 }
 
+static void sl82c105_fixup(struct pci_dev *pdev)
+{
+	u32 val;
+
+	pci_read_config_dword(pdev, 0x40, &val);
+	val |= CTRL_P0EN | CTRL_P0F16 | CTRL_P1F16;
+	pci_write_config_dword(pdev, 0x40, val);
+}
 
 static int sl82c105_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 {
@@ -306,7 +315,6 @@ static int sl82c105_init_one(struct pci_dev *dev, const struct pci_device_id *id
 	/* for now use only the first port */
 	const struct ata_port_info *ppi[] = { &info_early,
 					       NULL };
-	u32 val;
 	int rev;
 	int rc;
 
@@ -325,13 +333,28 @@ static int sl82c105_init_one(struct pci_dev *dev, const struct pci_device_id *id
 	else
 		ppi[0] = &info_dma;
 
-	pci_read_config_dword(dev, 0x40, &val);
-	val |= CTRL_P0EN | CTRL_P0F16 | CTRL_P1F16;
-	pci_write_config_dword(dev, 0x40, val);
+	sl82c105_fixup(dev);
 
 	return ata_pci_bmdma_init_one(dev, ppi, &sl82c105_sht, NULL, 0);
 }
 
+#ifdef CONFIG_PM
+static int sl82c105_reinit_one(struct pci_dev *pdev)
+{
+	struct ata_host *host = dev_get_drvdata(&pdev->dev);
+	int rc;
+
+	rc = ata_pci_device_do_resume(pdev);
+	if (rc)
+		return rc;
+
+	sl82c105_fixup(pdev);
+
+	ata_host_resume(host);
+	return 0;
+}
+#endif
+
 static const struct pci_device_id sl82c105[] = {
 	{ PCI_VDEVICE(WINBOND, PCI_DEVICE_ID_WINBOND_82C105), },
 
@@ -342,7 +365,11 @@ static struct pci_driver sl82c105_pci_driver = {
 	.name 		= DRV_NAME,
 	.id_table	= sl82c105,
 	.probe 		= sl82c105_init_one,
-	.remove		= ata_pci_remove_one
+	.remove		= ata_pci_remove_one,
+#ifdef CONFIG_PM
+	.suspend	= ata_pci_device_suspend,
+	.resume		= sl82c105_reinit_one,
+#endif
 };
 
 static int __init sl82c105_init(void)

drivers/ata/pata_via.c

@@ -509,6 +509,27 @@ static void via_config_fifo(struct pci_dev *pdev, unsigned int flags)
 	}
 }
 
+static void via_fixup(struct pci_dev *pdev, const struct via_isa_bridge *config)
+{
+	u32 timing;
+
+	/* Initialise the FIFO for the enabled channels. */
+	via_config_fifo(pdev, config->flags);
+
+	if (config->udma_mask == ATA_UDMA4) {
+		/* The 66 MHz devices require we enable the clock */
+		pci_read_config_dword(pdev, 0x50, &timing);
+		timing |= 0x80008;
+		pci_write_config_dword(pdev, 0x50, timing);
+	}
+	if (config->flags & VIA_BAD_CLK66) {
+		/* Disable the 66MHz clock on problem devices */
+		pci_read_config_dword(pdev, 0x50, &timing);
+		timing &= ~0x80008;
+		pci_write_config_dword(pdev, 0x50, timing);
+	}
+}
+
 /**
  *	via_init_one		-	discovery callback
  *	@pdev: PCI device
@@ -570,7 +591,6 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	struct pci_dev *isa;
 	const struct via_isa_bridge *config;
 	u8 enable;
-	u32 timing;
 	unsigned long flags = id->driver_data;
 	int rc;
 
@@ -609,9 +629,6 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 			return -ENODEV;
 	}
 
-	/* Initialise the FIFO for the enabled channels. */
-	via_config_fifo(pdev, config->flags);
-
 	/* Clock set up */
 	switch (config->udma_mask) {
 	case 0x00:
@@ -637,12 +654,7 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 		return -ENODEV;
  	}
 
-	if (config->flags & VIA_BAD_CLK66) {
-		/* Disable the 66MHz clock on problem devices */
-		pci_read_config_dword(pdev, 0x50, &timing);
-		timing &= ~0x80008;
-		pci_write_config_dword(pdev, 0x50, timing);
-	}
+	via_fixup(pdev, config);
 
 	/* We have established the device type, now fire it up */
 	return ata_pci_bmdma_init_one(pdev, ppi, &via_sht, (void *)config, 0);
@@ -661,29 +673,14 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 
 static int via_reinit_one(struct pci_dev *pdev)
 {
-	u32 timing;
 	struct ata_host *host = dev_get_drvdata(&pdev->dev);
-	const struct via_isa_bridge *config = host->private_data;
 	int rc;
 
 	rc = ata_pci_device_do_resume(pdev);
 	if (rc)
 		return rc;
 
-	via_config_fifo(pdev, config->flags);
-
-	if (config->udma_mask == ATA_UDMA4) {
-		/* The 66 MHz devices require we enable the clock */
-		pci_read_config_dword(pdev, 0x50, &timing);
-		timing |= 0x80008;
-		pci_write_config_dword(pdev, 0x50, timing);
-	}
-	if (config->flags & VIA_BAD_CLK66) {
-		/* Disable the 66MHz clock on problem devices */
-		pci_read_config_dword(pdev, 0x50, &timing);
-		timing &= ~0x80008;
-		pci_write_config_dword(pdev, 0x50, timing);
-	}
+	via_fixup(pdev, host->private_data);
 
 	ata_host_resume(host);
 	return 0;

drivers/ata/sata_mv.c

@@ -4087,8 +4087,11 @@ static int mv_platform_probe(struct platform_device *pdev)
 	dev_info(&pdev->dev, "slots %u ports %d\n",
 		 (unsigned)MV_MAX_Q_DEPTH, host->n_ports);
 
-	return ata_host_activate(host, platform_get_irq(pdev, 0), mv_interrupt,
-				 IRQF_SHARED, &mv6_sht);
+	rc = ata_host_activate(host, platform_get_irq(pdev, 0), mv_interrupt,
+			       IRQF_SHARED, &mv6_sht);
+	if (!rc)
+		return 0;
+
 err:
 #if defined(CONFIG_HAVE_CLK)
 	if (!IS_ERR(hpriv->clk)) {
@@ -4110,8 +4113,7 @@ err:
  */
 static int __devexit mv_platform_remove(struct platform_device *pdev)
 {
-	struct device *dev = &pdev->dev;
-	struct ata_host *host = dev_get_drvdata(dev);
+	struct ata_host *host = platform_get_drvdata(pdev);
 #if defined(CONFIG_HAVE_CLK)
 	struct mv_host_priv *hpriv = host->private_data;
 #endif
@@ -4129,7 +4131,7 @@ static int __devexit mv_platform_remove(struct platform_device *pdev)
 #ifdef CONFIG_PM
 static int mv_platform_suspend(struct platform_device *pdev, pm_message_t state)
 {
-	struct ata_host *host = dev_get_drvdata(&pdev->dev);
+	struct ata_host *host = platform_get_drvdata(pdev);
 	if (host)
 		return ata_host_suspend(host, state);
 	else
@@ -4138,7 +4140,7 @@ static int mv_platform_suspend(struct platform_device *pdev, pm_message_t state)
 
 static int mv_platform_resume(struct platform_device *pdev)
 {
-	struct ata_host *host = dev_get_drvdata(&pdev->dev);
+	struct ata_host *host = platform_get_drvdata(pdev);
 	int ret;
 
 	if (host) {
@@ -4353,7 +4355,7 @@ static int mv_pci_init_one(struct pci_dev *pdev,
 #ifdef CONFIG_PM
 static int mv_pci_device_resume(struct pci_dev *pdev)
 {
-	struct ata_host *host = dev_get_drvdata(&pdev->dev);
+	struct ata_host *host = pci_get_drvdata(pdev);
 	int rc;
 
 	rc = ata_pci_device_do_resume(pdev);

drivers/ata/sata_sil24.c

@@ -268,7 +268,7 @@ union sil24_cmd_block {
 	struct sil24_atapi_block atapi;
 };
 
-static struct sil24_cerr_info {
+static const struct sil24_cerr_info {
 	unsigned int err_mask, action;
 	const char *desc;
 } sil24_cerr_db[] = {
@@ -1019,7 +1019,7 @@ static void sil24_error_intr(struct ata_port *ap)
 
 	/* deal with command error */
 	if (irq_stat & PORT_IRQ_ERROR) {
-		struct sil24_cerr_info *ci = NULL;
+		const struct sil24_cerr_info *ci = NULL;
 		unsigned int err_mask = 0, action = 0;
 		u32 context, cerr;
 		int pmp;